Skip to main content

CAPAS ULTRAFINAS BASADAS EN MATERIALES POROSOS NO CONVENCIONALES PARA DESAFIOS DE LA SOSTENIBILIDAD AMBIENTAL

PID2019-104009RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 80
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Green preparation of thin films of polybenzimidazole on flat and hollow fiber supports: Application to hydrogen separation

  • Sánchez-Laínez, Javier
  • Etxeberria-Benavides, Miren
  • David, Oana
  • Téllez, Carlos
  • Coronas, Joaquín
This work shows the preparation of thin films, with thickness from 70 nm to 1 μm, of meta-polybenzimidazole (m-PBI) on polyimide P84 supports. Ethanolic solutions of m-PBI were used to coat flat and hollow fiber supports of asymmetric P84 with m-PBI in a process where the coating and drying was performed at room temperature. A solution of NaOH in EtOH allowed the dissolution of the m-PBI powder, providing the perfect coating solution to build thin films of m-PBI without damaging the polymeric support. It also meant a green alternative, avoiding the use of toxic solvents, such as dimethylacetamide. The resulting membranes have been tested for the separation of H2 mixtures at high temperature at different setups to allow checking their reproducibility. With 100 nm thickness the membranes showed their best gas separation performance. For flat membranes at 180 °C and 3 bar feed pressure a H2 permeance of 48.5 GPU was obtained, with respective H2/CO2 and H2/N2 selectivities of 33.3 and 55.8. Besides, the hollow fibers under a feed pressure of 6 bar and tested at the same temperature showed near 90 GPU of H2 with a H2/CO2 selectivity of 13.5 in the one-fiber module and over 39 GPU of H2 with a H2/CO2 selectivity of 20.2 in the five-fiber module. Finally, the stability of the membranes was proved for 22 days at 180 °C., Financial support from the Spanish Research Projects MAT2016-77290-R (MINECO/AEI, FEDER/UE), PID2019-104009RB−I00/AEI/10.13039/501100011033 and T43-17R (the Aragón Government and the ESF) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polyamide-MIL-101(Cr) thin films synthesized on either the outer or Inner surfaces of a polysulfone hollow fiber for water nanofiltration

  • Echaide‐Górriz, Carlos
  • Aysa-Martínez, Yolanda
  • Navarro, Marta
  • Téllez, Carlos
  • Coronas, Joaquín
High-performance thin film nanocomposite (TFN) hollow fiber (HF) membranes, with MIL-101(Cr) MOF nanoparticles (52 ± 13 nm) embedded, have been synthesized with the polyamide layer formed either on the outer or inner surface of a polysulfone HF (250 and 380 μm ID and OD, respectively). The TFN_out membrane was developed using the conventional interfacial polymerization method, typically applied to obtain TFN flat membranes (MOF particles added to the thin layer by deposition). This membrane gave a water permeance value of 1.0 ± 0.7 L·m–2·h–1·bar–1 and a rejection of 90.9 ± 1.2% of acridine orange (AO, 265 Da). In contrast, the TFN_in membrane was synthesized by microfluidic means and gave a significantly higher water permeance of 2.8 ± 0.2 L·m–2·h–1·bar–1 and a slightly lower rejection of 87.4 ± 2.5% of the same solute. This remarkable increase of flux obtained with small solute AO suggests that the HF membranes developed in this work would exhibit good performance with other typical solutes with higher molecular weight than AO. The differences between the performances of both TFN_in and TFN_out membranes lay on the distinct superficial physicochemical properties of the support, the synthesis method, and the different concentrations of MOF present in the polyamide films of both membranes. The TFN_in is more desirable due to its potential advantages, and more effortless scalability due to the microfluidic continuous synthesis. In addition, the TFN_in membrane needs much fewer quantities of reactants to be synthesized than the TFN_out or the flat membrane version., Financial support from the Research Projects MAT2016-77290-R (AEI/FEDER, UE) and PID2019-104009RB-I00/AEI/10.13039/501100011033, the Aragón Government (T43-20R), and the ESF are gratefully acknowledged. C.E. -G. thanks the Aragón Government for his PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An evolving insight into metal organic framework-functionalized membranes for water and wastewater treatment and resource recovery

  • Le, Tin
  • Chen, Xi
  • Dong, Hang
  • Tarpeh, William
  • Perea-Cachero, Adelaida
  • Coronas, Joaquín
  • Martin, Stephen M.
  • Mohammad, Munirah
  • Razmjou, Amir
  • Esfahani, Amirsalar R.
  • Koutahzadeh, Negin
  • Cheng, Peifu
  • Kidambi, Piran R.
  • Rabbani Esfahani, Milad
Metal organic frameworks (MOFs) represent one of the largest classes of porous crystalline materials. MOFs have been increasingly applied as functionalizing agents for membranes because of their porosity, high surface area, small particle size, aspect ratio control, tuneability, compatibility with a polymeric network, and exuberance of diverse functional groups. In this comprehensive review paper, we discuss achievements, opportunities, and challenges related to the functionalization of different types of membranes using MOFs for water and wastewater treatment and desalination. The current synthesis and fabrication approaches of MOF-functionalized membranes were identified and critically reviewed. The effects of MOFs on membrane performance, including permeation, selectivity, and antifouling, were discussed. Also, the application of MOF-functionalized membranes in aqueous environments for conventional applications such as heavy metal removal and emerging applications such as resource recovery was enunciated. Finally, recommendations and future directions were provided for further improvement in the field of MOF-functionalized membranes for water treatment and reuse., The authors would like to acknowledge the financial support of the National Science Foundation (NSF) under Grant No. 1941700 and NSF Career No. 1944134 and to the Department of the Interior (DOI), Bureau of Reclamation (BR) under Agreement No. R19AC00087. The authors would like to acknowledge the financial support of the United States Geological Survey (USGS) under Sponsor No. 20-WRC207214 and to the Environmental Protection Agency (EPA) under Award No. 84014501. The financial Spanish Research Projects MAT2016-77290-R (MINECO/AEI, FEDER/UE), PID2019-104009RB-I00 (MICINN/AEI, FEDER/UE), and T43-20R (the Aragón Government and the ESF) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metal organic framework top-down and bottom-up patterning techniques

  • Ruiz-Zambrana, César L.
  • Malankowska, Magdalena
  • Coronas, Joaquín
Metal organic frameworks (MOFs) have recently attracted considerable research interest in several fields from coordination chemistry and materials science to engineering and medicine not only due to energy and environmental issues but also due to the need for new paradigms of efficiency and sustainability according to the requirements of the 21st century global society. Because of their crystalline and organic–inorganic nature, they are able to crystallize constituting intergrown architectures ductile enough to be patterned, with the use of appropriate techniques, as nano- and micro-devices with multiple applications. This perspective comprehensively summarizes the recent state of the art in the use of top-down and bottom-up methodologies to create MOF structures with a defined pattern at the nano- and micro-scale., Financial support from the Spanish Research Projects MAT2016-77290-R (MINECO/AEI, FEDER/UE), PID2019-104009RB-I00/AEI/10.13039/501100011033 and T43-20R (the Aragón Government and the ESF) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microplastics in marine environment: a review on sources, classification, and potential remediation by membrane technology

  • Malankowska, Magdalena
  • Echaide‐Górriz, Carlos
  • Coronas, Joaquín
The presence of microplastics in marine environment has been a pollution problem for years; however, people have only recently become aware of it, similar to the situation in the last few decades with global warming due to greenhouse gases. Microplastics are pollutants that are highly stable to complete biodegradation, and there is a high risk that they can enter the food chain (e.g. fish or agriculture products) because of the fact that secondary plastics (in principle, as small as monomers and oligomers) generated from the evolution of primary plastics (that directly spread in the environment) require more specific separation processes for their removal. In this review, firstly, we focus on the classification of microplastics and potential remediation technologies to be applied depending on their size. Secondly, membrane technologies (microfiltration, ultrafiltration and nanofiltration) are presented in the context of microplastics removal, revealing their suitability for the task and a future path of research and development to be carried out to mitigate the problem., Financial support from the Spanish Research Projects MAT2016-77290-R (MINECO/AEI, FEDER/UE), PID2019-104009RB-I00 (MICINN/AEI, FEDER/UE) and T43-20R (the Aragón Government and the ESF) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Vapor phase interfacial polymerization: a method to synthesize thin film composite membranes without using organic solvents

  • Paseta, Lorena
  • Echaide‐Górriz, Carlos
  • Téllez, Carlos
  • Coronas, Joaquín
Thin film composite membranes (TFC) of polyamide (PA) prepared by interfacial polymerization (IP) between a diamine and an acyl chloride are applied to industrial nanofiltration and reverse osmosis. Water, to dissolve the diamine, and n-hexane, to dissolve the acyl chloride, solvents are involved in the IP process. Eliminating the use of n-hexane would be crucial to produce a greener TFC membrane synthesis method. This is achieved here by carrying out an interfacial polymerization from the vapor phase. First, the membrane support was impregnated with the aqueous diamine solution. Second, the support with the diamine was contacted with vapors of the acyl chloride to unchain the IP reaction. Besides the absence of n-hexane, acyl chloride was applied more efficiently avoiding its loss during the cleaning operations carried out in the typical IP process. These membranes were applied in the nanofiltration of simulated micropollutants in water (rose Bengal, sunset yellow and acridine orange dyes), with higher water permeance (up to 3.3 L·m−2·h−1·bar−1) than that of conventional TFC membranes and dye rejections higher than 94% in all cases., Financial support from the Research Projects MAT2016-77290-R (AEI/FEDER, UE) and the PID2019-104009RB-I00/AEI/10.13039/501100011033, the Aragón Government (T43-20R) are gratefully acknowledged. All of the microscopy work was done in the Laboratorio de Microscopías Avanzadas at the Instituto de Nanociencia y Materiales de Aragón (LMA-INMA). The authors acknowledge the LMA-INA for offering access to their instruments and expertise., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phase inversion method for the preparation of Pebax® 3533 thin film membranes for CO2/N2 separation

  • Martínez-Izquierdo, Lidia
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
Thin film composite membranes of poly(ether-block-amide) copolymer Pebax® 3533 were prepared for the first time on asymmetric polysulfone supports by a phase inversion method. The casting solution concentration and the number of layers were varied to study their influence on the selective layer thickness and the gas separation performance. The casting solution concentrations of polymer dissolved in the 1-propanol/1-butanol mixture were 0.25, 0.5, 1.0 and 1.5 wt%. These conditions produced membranes with selective skin layers with thicknesses from 0.2 to 1.8 µm. All the membranes were characterized by scanning electron microscopy, thermogravimetric analysis and infrared spectroscopy. Furthermore, the intrinsic viscosity of all the casting solutions was studied to understand the effect of the polymer concentration on the homogeneity and the gas separation properties of the obtained membranes. In general, lower viscosity of casting solutions rendered to more defective skin layers, resulting in a higher number of layers required to obtain selective membranes. The gas separation performance was tested for the post-combustion 15/85 CO2/N2 mixture at 25–50 °C and under a feed pressure of 3 bar. The best separation performance was achieved with the 0.5 wt% casting solution membranes after the deposition of four polymer layers, obtaining a CO2 permeance of 127 GPU and a CO2/N2 selectivity of 21.4 at 35 °C, the same selectivity of the corresponding dense membrane but with much higher permeance., Financial support from the Spanish Research Projects MAT2016-77290-R (MINECO/AEI, FEDER/UE), PID2019‐104009RB−I00/AEI/10.13039/501100011033 (Agencia Estatal de Investigación, Spain) and T43-20R (the Aragón Government and ESF) is gratefully acknowledged. L. Martínez-Izquierdo also thanks the Aragón Government (DGA) for her PhD grant. All microscopy work was done in the Laboratorio de Microscopías Avanzadas at the Instituto de Nanociencia de Aragón (LMA-INA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solventless synthesis of ZIF-L and ZIF-8 with hydraulic press and high temperature

  • Pérez-Miana, Marta
  • Reséndiz-Ordóñez, Javier U.
  • Coronas, Joaquín
In recent years, alternative methods to conventional synthesis of MOFs (metal-organic frameworks) have emerged due to the problematic use of solvents for both the environment and human health. Here we present the synthesis of ZIFs (zeolitic imidazolate frameworks) at high pressure by means of a hydraulic press provided with a heating mechanism. By the optimization of parameters such as temperature, time and the addition of promotor NH4NO3, a considerable increase in the reaction yield was achieved in products, neither washed nor activated, obtained since the first minute of reaction. Depending on the operation conditions, ZIF-L appeared as competing phase with ZIF-8. Upon transformation of ZIF-L into ZIF-8 in presence of ethanol, a reaction yield of 58.2% was achieved to highly crystalline ZIF-8 with a BET specific surface area of 947 m2/g. This green, fast, versatile and improved method suggests a possible way to future synthesis of other MOFs and the possibility of their industrial implementation., Financial support from the Research Projects MAT2016-77290-R and the PID2019-104009RB-I00/AEI/10.13039/501100011033 (Spanish AEI/FEDER, UE), the Aragón Government (T43-20R and Marta Pérez-Miana PhD grant) and the ESF are gratefully acknowledged. All the microscopy work was done in the Laboratorio de Microscopías Avanzadas (LMA). The authors acknowledge the LMA for offering access to their instruments and expertise and the Servicios de Apoyo a la Investigación (SAI), both from the Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Poly(ether-block-amide) copolymer membranes in CO2 separation applications

  • Selomon Embaye, Alula
  • Martínez-Izquierdo, Lidia
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
Poly(ether-block-amide) (PEBA, commercialized as Pebax) copolymer membranes show a highly promising platform for preparing high-performance membranes for CO2 capture from process streams containing CH4 and N2. Pebax combines high CO2 affinity with the desired mechanical strength for polymeric membranes thanks to its flexible polyether segment and hard polyamide block, respectively. Furthermore, researchers have been improving the performance of these membranes by preparing a thin Pebax selective layer on top of porous supports and by incorporating inorganic and organic nanofillers into the Pebax matrix to overcome the permeance-selectivity limit. The chemical and structural characteristics of Pebax membranes according to the different fabrication techniques and parameters are discussed first. Then, the recent developments in terms of both Pebax-based thin film composite and mixed matrix membranes are summarized. Finally, thermal and water stabilities of these membranes are addressed., This project has received funding from the European Union Horizon 2020 research and innovation program under Grant Agreement No. 760944 (MEMBER project). Also, financial support from the Research Project PID2019-104009RB-I00/AEI/10.13039/501100011033 and the Aragón Government (Grant T43-20R and L. Martínez-Izquierdo Ph.D. grant) is gratefully acknowledged. Finally, we would like to thank the European Commission–Education, Audiovisual and Culture Executive Agency (EACEA) for the Erasmus Mundus scholarship under the program: Erasmus Mundus Master in Membrane Engineering for a Sustainable Word (EM3E-4SW), Project Number- 574441-EPP-1-2016-1-FR-EPPKA1-JMD-MOB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pre-combustion gas separation by ZIF-8-polybenzimidazole mixed matrix membranes in the form of hollow fibres—long-term experimental study

  • Perea-Cachero, Adelaida
  • Etxeberria-Benavides, Miren
  • David, Oana
  • Deacon, Adam
  • Johnson, Timothy
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
Polybenzimidazole (PBI) is a promising and suitable membrane polymer for the separation of the H2/CO2 pre-combustion gas mixture due to its high performance in terms of chemical and thermal stability and intrinsic H2/CO2 selectivity. However, there is a lack of long-term separation studies with this polymer, particularly when it is conformed as hollow fibre membrane. This work reports the continuous measurement of the H2/CO2 separation properties of PBI hollow fibres, prepared as mixed matrix membranes with metal-organic framework (MOF) ZIF-8 as filler. To enhance the scope of the experimental approach, ZIF-8 was synthesized from the transformation of ZIF-L upon up-scaling the MOF synthesis into a 1 kg batch. The effects of membrane healing with poly(dimethylsiloxane), to avoid cracks and non-selective gaps, and operation conditions (use of sweep gas or not) were also examined at 200°C during approximately 51 days. In these conditions, for all the membrane samples studied, the H2 permeance was in the 22–47 GPU range corresponding to 22–32 H2/CO2 selectivity values. Finally, this work continues our previous report on this type of application (Etxeberria-Benavides et al. 2020 Sep. Purif. Technol.237, 116347 (doi:10.1016/j.seppur.2019.116347)) with important novelties dealing with the use of ZIF-8 for the mixed matrix membrane coming from a green methodology, the long-term gas separation testing for more than 50 days and the study on the membrane operation under more realistic conditions (e.g. without the use of sweep gas)., This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 760944 (MEMBER project). Also, financial support from the research project PID2019-104009RB-I00/AEI/10.13039/501100011033 from the Spanish Agencia Estatal de Investigación (AEI) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Single-walled carbon nanotube buckypaper as support for highly permeable double layer polyamide/zeolitic imidazolate framework in nanofiltration processes

  • Berned-Samatán, Victor
  • Rubio, César
  • Galán, Alejandro
  • Muñoz, Edgar
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Coronas, Joaquín
  • Téllez, Carlos
11 figures, 1 table.-- Supplementary information available., The development of membranes for nanofiltration applications requires not only selective layers but also suitable supports to control their synthesis as well as to enable efficient and competitive membrane performances. Single-walled carbon nanotube free-standing films (denoted as buckypaper) have been used as supports for the preparation of polyamide (PA) layers by interfacial polymerization (IP) and tested for dead-end nanofiltration for dyes removal (265–1017 Da) from water and organic solvents. The arrangement of the phases during the IP is essential, thus impregnation on the buckypaper support, first with the organic phase and then with the aqueous phase (denoted as inverse IP, iIP) leads to permeances (of up to 28.0 and 31.4 L m−2 h−1 bar−1 for water and methanol, respectively) and rejection values (>96%) that exceed those of the membranes prepared by reversing the impregnation order. Secondly, a double layer PA/zeolitic imidazolate framework (ZIF-8 or ZIF-93) was prepared on the buckypaper (bp). The design of this double layer led to superior membrane performance, in particular for the hydrophilic ZIF-93, as it changes the PA layer properties (increasing both hydrophilicity and surface roughness) providing higher permeances (up to 59.3 and 76.0 L m−2 h−1 bar−1 for water and methanol, respectively) and dye rejections (>98.5%) than the bare PA layer prepared by iIP. This attractive performance of the PA/ZIF-93/bp membrane has been corroborated with experiments in cross-flow nanofiltration and dead-end nanofiltration of aqueous salt solutions, long-term stability nanofiltration and the study the membrane separation performance after a chlorine treatment. The results reported here therefore show the enormous potential of these membrane architectures for a variety of selective separation processes., Grants PID2019-104009RB-I00 and PID2019-104272RB-C51 funded by MCIN/AEI/10.13039/501100011033 are gratefully acknowledged (Agencia Estatal de Investigación (AEI) and MCIN (Ministerio de Ciencia e Innovación), Spain). The Aragón Government is also gratefully acknowledged (Grupos reconocidos T43_20R, T03_20R and E25_20R). V. B.-S. thanks the Grant BES-2017-080209 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Polyether-block-amide/MOF thin film nanocomposite (TFN) membranes for CO2 capture

  • Martínez-Izquierdo, Lidia
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
Trabajo presentado al Young Researchers CIS, celebrado online del 6 al 8 de septiembre de 2021., Financial support from the Research Project PID2019-104009RB-I00/AEI/10.13039/ 501100011033 is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Solventless synthesis of ZIF-L and ZIF-8 with hydraulic press and high temperature

  • Pérez-Miana, Marta
  • Reséndiz-Ordóñez, Javier U.
  • Coronas, Joaquín
Trabajo presentado al Young Researchers CIS, celebrado online del 6 al 8 de septiembre de 2021., Financial support from the research project PID2019-104009RB-100 is gratefully acknowledge. M. P.-M. thanks the Aragon Government for her PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Thin Film Composite (TFC) with a ZIF layer on carbonaceous support for nanofiltration

  • Berned-Samatán, Victor
  • Rubio, César
  • Galán, Alejandro
  • Muñoz, Edgar
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Téllez, Carlos
  • Coronas, Joaquín
Trabajo presentado al Young Researchers CIS, celebrado online del 6 al 8 de septiembre de 2021., Financial support from the Research Projects PID2019-104009RB-I00/AEI/10.13039/501100011033 and the Aragón Government (T43-20R) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Covalent organic frameworks: study of the synthesis conditions for membrane preparation

  • Zornoza, Beatriz
  • Martínez-Visus, Iñigo
  • Ulcuango, Matias
  • Coronas, Joaquín
  • Téllez, Carlos
Resumen del póster presentado a la Conferencia EuroMembrane, celebrada en Copenhague (Dinamarca) del 28 de noviembre al 2 de diciembre de 2021. Main topic: 1D- and 2D-materials for membranes., Mixed matrix membranes (MMMs) comprises molecular sieves such as porous crystalline solids (dispersed filler) embedded in a porous polymer (continuous matrix). Among the different porous materials stand out the zeolites, MOF (metal-organic frameworks), and the most recently synthesized COF (covalent organic frameworks). While MOF particles are a class of porous polymeric material consisting of metal ions linked together by organic bridging ligands (a combination of inorganic and organic counterparts), COFs are only synthesized by organic materials where building blocks are linked by strong covalent bonds. They are made entirely from light elements (H, B, C, N, and O) providing covalent frameworks that could be functionalized for diverse applications ranging from gas storage to catalysis. Giving the premise of the good performance of MOFs embedded in MMMs for gas separation, this work evaluates the COF candidates that could be successfully used as filler materials in a membrane attending to different synthesis procedures, pore structure and particle sizes. Promising separation performance relies on a proper contact between filler and continuous polymer matrix, as interfacial defects between both phases are undesired. In general, harsh experimental conditions (e.g., reaction in a sealed pyrex tube, inert atmosphere, suitable solvents, longer time for crystallization, etc.) are required during COF synthesis to form well-ordered crystalline frameworks. The selection of COF particles with low pore size will allow molecular sieving transport of separating molecules. Two synthesis routes such as mechanochemisty or via dynamic covalent bonding, synthesizing the COF in water, emerge of considerable interest. This will allow the construction of bonds through a simple, economical, and environmental friendly route for MMM fabrication., Ayuda PID2019‐104009RB−I00 financiada por CIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Improved CO2 separation performance of poly etherblock amide (PEBA)/MOF thin film nanocomposite (TFN) membranes

  • Martínez-Izquierdo, Lidia
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
Resumen del póster presentado a la Conferencia EuroMembrane, celebrada en Copenhague (Dinamarca) del 28 de noviembre al 2 de diciembre de 2021. Main topic: Gas separation., To achieve the Paris Agreement target of below 1.5 ºC in the global average temperature rising, harmful greenhouse gases emissions must be reduced considerably in the coming decades. To accomplish this target, energy-efficient and low-carbon technologies, and CO2 capture and storage approaches must be developed. Recently, membrane-based processes have emerged as attractive candidates for energy-efficient gas separations. The performance of a membrane can be expressed in terms of (i) permeance, the normalized flux for the pressure gradient (ii) permeability, the permeance multiplied by the membrane thickness, and (iii) selectivity, the ratio of permeances. To achieve an efficient separation, which exceeds the Robeson trade-off relationship between permeability and selectivity, an ideal membrane for gas separation should be as thin as possible, to maximize the flux through it (high CO2 permeance), highly selective and mechanically robust. To accomplish this target, composite membranes must be prepared with a very thin selective layer. Furthermore, the incorporation of porous nanofillers in ultra-thin dense layers has demonstrated superior gas separation performances compared to that of the bare polymer. In this work, thin-film nanocomposite (TFN) membranes, comprising different porous zeolitic imidazolate frameworks (ZIFs) embedded in a dense polyether-block-amide (PEBA) thin layer have been fabricated. Moreover, the influence of particle loading and functionalization have also been studied., Financial support from the Research Project PID2019-104009RB-I00/AEI/10.13039/ 501100011033 is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Modification of polymeric hollow fibers by microfluidics for gas separation

  • Zornoza, Beatriz
  • Malankowska, Magdalena
  • Paseta, Lorena
  • Echaide‐Górriz, Carlos
  • Téllez, Carlos
  • Coronas, Joaquín
Resumen del póster presentado a la Conferencia EuroMembrane, celebrada en Copenhague (Dinamarca) del 28 de noviembre al 2 de diciembre de 2021. Main topic: Gas separation., The majority of the current energy is produced from burning fossil fuels, being it electricity, fuel or gas. Without a doubt these processes result in the emission of carbon dioxide to the atmosphere. CO2 holds a major share in causing dramatic climate changes and its impact can now be seen on the world panorama. Gas streams focused on the separation of CO2 from CH4 is one of the possible remediation technologies, especially important for the gas industry. Membranes can provide an eco-friendly and low energy consumption alternative to traditional separation techniques. Various membranes with different structures have been studied for this purpose and thin film composite (TFC) membranes being especially attractive due to their high performance thanks to their small thicknesses (ca. 50 nm) and possibility of modification with porous nanoparticles (e.g. metal-organic frameworks (MOF)). In general, the structure of these membranes, usually prepared by interfacial polymerization, enables that the chemistry and porosity of both layers are changed separately. In this work, we focused on synthesizing a continues MOF layer on the lumen side of the hollow fibre instead of MOF being dispersed in the polymeric matrix. Gas separation with MOF based thin-film nanocomposite membranes represent a unique opportunity to produce a technology breakthrough able to address the environmental tasks just mentioned. Until now the fabrication of these membranes has been mainly demonstrated with a single hollow fiber (HF) [1,2]. Thus, another goal of this work is the implementation of the microfluidic synthesis methodology at larger scale and to increase the number of HF membranes that can be modified simultaneously of up to 10. Briefly, the synthesis procedure involves using three syringe pumps and pumping of first: metal salt, second: ligand, and third: methanol to the inner side of the polysulfone hollow fiber. The fabricated containing a thin selective MOF layer mini-modules are tested in a gas separation set-up provided of gas chromatograph for the estimation of the membrane performance., This project has received funding from the European Union´s Horizon 2020 research and innovation program under grant agreement No 862330 (INNOMEM project). Also, financial support from the research project PID2019-104009RBI00/AEI/10.13039/501100011033 from the AEI is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Thin Film Composite (TFC) with a MOF layer on Single Walled Carbon Nanotubes buckypaper (SWCNT-bp) for Nanofiltration (NF) and Organic Solvent Nanofiltration (NF)

  • Berned-Samatán, Victor
  • Rubio, César
  • Muñoz, Edgar
  • Coronas, Joaquín
  • Téllez, Carlos
Resumen del póster presentado a la Conferencia EuroMembrane, celebrada en Copenhague (Dinamarca) del 28 de noviembre al 2 de diciembre de 2021. Main topic: Drinking water., Nowadays, in the chemical and pharmaceutical industries, the nanofiltration membrane system is gaining importance in both aqueous and organic solvents due to its flexibility, energy efficiency, and low-cost technology. Usually, these membranes are constituted by porous polymeric supports and a selective polyamide layer, which can be improved by the introduction of a filler. Between other materials, MOFs (metal-organic frameworks) have been used as fillers as they have outstanding features (high specific surface area, adsorption properties, molecular sieving, flexibility, organicinorganic nature, and possibility of functionalization). Typically, the filler has been included during the interfacial polymerization of the polyamide layer but other different methodologies to position the MOF in the membrane have been developed like interfacial synthesis or Langmuir-Schaefer. In this work, we report a nanofiltration membrane with good performance in both organic and aqueous feeds based in SWCNT-bp support in which a MOF (ZIF-8 and ZIF-93) has been grown via a layer by layer method, on top of which a polyamide layer is synthesized by an interfacial polymerization method., Financial support from the Research Projects PID2019-104009RB-I00/AEI/10.13039/501100011033 and the Aragón Government (T43-20R) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Delamination and characterization of a metal organic framework and its application in catalysis

  • Navarro, Marta
  • Iglesia, Óscar de la
  • Coronas, Joaquín
  • Téllez, Carlos
Resumen del póster presentado a la Virtual Conference Microscopy at the Frontiers of Science (MFS), celebrada del 29 de septiembre al 1 de octubre de 2021., Financial support from the research project PID2019-104009RBI00/AEI/10.13039/501100011033 and the Aragón Government (T43-20R) are gratefully acknowledged. Additionally, authors acknowledge the use of the National Facility ELECMI ICTS, node "Laboratorio de Microscopías Avanzadas" at University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Preparación de membranas compuestas de capa fina de PEBAX® 3533 por el método de inversión de fases para la separación de CO2

  • Martínez-Izquierdo, Lidia
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
Resumen del póster presentado a la 9ª Jornada de Jóvenes Investigadores de Química y Física de Aragón, celebrada en la Universidad de Zaragoza el 16 de diciembre de 2021., Ayuda PID2019‐104009RB−I00 financiada por MCIN/AEI/10.13039/501100011033. Lidia Martínez Izquierdo también agradece la financiación recibida por el Gobierno de Aragón para el desarrollo de su tesis doctoral., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Preparación más sostenible de estructuras orgánicas nanoporosas covalentes para su aplicación a membranas

  • Martínez-Visus, Iñigo
  • Ulcuango, Matias
  • Zornoza, Beatriz
  • Coronas, Joaquín
  • Téllez, Carlos
Resumen del póster presentado a la 9ª Jornada de Jóvenes Investigadores de Química y Física de Aragón, celebrada en la Universidad de Zaragoza el 16 de diciembre de 2021., La demanda creciente de población y actividad económica requiere de procesos de separación más eficientes que permitan una reducción del consumo energético y disminución de emisiones. Las membranas han demostrado en años recientes ser una de las tecnologías de separación más prometedoras, de fácil escalado, bajo coste e impacto medioambiental, y amplio campo de aplicación: desde separación de gases, tratamiento de aguas, nanofiltración, pervaporación hasta celdas de combustible. La limitación de permeabilidad y selectividad de las membranas dificulta su aplicación industrial, requiriendo el desarrollo de nuevos materiales como las estructuras orgánicas covalentes (COF, del inglés Covalent Organic Framework). Los COF obtenidos mediante la formación de enlaces covalentes de elementos ligeros (H, B, C, N y O) son sólidos de arquitectura cristalina, estructura porosa, elevada área superficial, tamaño de poro y funcionalidad ajustables y buena compatibilidad con polímeros. Entre los métodos de síntesis de COF disponibles el solvotermal es el más ampliamente utilizado al permitir un buen control del medio reactivo, a costa de emplear largos tiempos de reacción (2-9 días), varios disolventes orgánicos y altas temperaturas. Es por ello que surge la necesidad de encontrar otras vías de obtención de COF más eficientes y de menor impacto ambiental. En este trabajo se desarrollan métodos de preparación de COF más respetuosos con el medio ambiente para su aplicación en separación con membranas. La cristalinidad de los COF obtenidos se determina mediante difracción de rayos X (XRD), el área superficial con técnicas de adsorción de nitrógeno, la estabilidad térmica por análisis termogravimétricos (TGA) y la morfología y tamaños de partícula mediante microscopía electrónica SEM y TEM., Ayuda PID2019‐104009RB−I00 financiada por MCIN/AEI/10.13039/501100011033. I. M-V ayuda PRE2020-092006 financiada por MCIN/AEI/10.13039/501100011033 y FSE “El FSE invierte en tu futuro”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Síntesis sin disolvente de ZIF-L y ZIF-8 mediante prensa hidráulica a alta temperatura

  • Pérez-Miana, Marta
  • Reséndiz-Ordóñez, Javier U.
  • Coronas, Joaquín
Resumen del póster presentado a la 9ª Jornada de Jóvenes Investigadores de Química y Física de Aragón, celebrada en la Universidad de Zaragoza el 16 de diciembre de 2021., Se agradece el apoyo financiero del Proyecto de Investigación PID2019-104009RB-I00 / AEI / 10.13039 / 501100011033. M. P.-M. agradece al Gobierno de Aragón su beca de doctorado., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Seeking of COF materials for hybrid membrane preparation towards molecular separation application

  • Zornoza, Beatriz
  • Ulcuango, Matias
  • Téllez, Carlos
  • Coronas, Joaquín
Trabajo presentado a la World Online Conference on Sustainable Technologies (WOCST), celebrada del 17 al 19 de maro de 2021., Financial support from PID2019-104009RB-I00/AEI/10.13039/501100011033, the Aragon Government, the ESF and FEDER is gratefully acknowledged. Funding from Juan de la Cierva IJCI-2016-30776 (B.Z.) program is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Study of the synthesis conditions of covalent organic frameworks for hybrid membranes

  • Ulcuango, Matias
  • Zornoza, Beatriz
  • Coronas, Joaquín
  • Téllez, Carlos
Trabajo presentado al Symposium of the Spanish Royal Society of Chemistry, celebrado online del 27 al 30 de septiembre de 2021., Financial support from PID2019-104009RB-100, the Aragon Government, the ESF and FEDER is gratefully acknowledge., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A comparative study between single gas and mixed gas permeation of polyether-block-amide type copolymer membranes

  • Martínez-Izquierdo, Lidia
  • Perea-Cachero, Adelaida
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
We analyze the gas separation performance of five polyether-block-amide type copolymers (Pebax® 1657, Renew®, 2533, 3533 and 4533). These codes are composed of different hard and rubbery segments with different proportions. Dense membranes were prepared by the casting-solution method and studied by elemental, thermogravimetric and X-ray diffraction analyses, FTIR-ATR spectroscopy and single and mixed gas permeation. Codes with the best separation performance are those of polyethylene oxide as the soft phase (Pebax® 1657 and Renew®) due to the more intense interactions of this segment with CO2, which increases the CO2/N2 solubility selectivity (17.5 and 30.5 for Pebax® 1657 and Renew®, respectively) and hence the CO2/N2 separation selectivity of the membrane (36 and 37 for Pebax® 1657 and Renew®, respectively, obtained from mixed gas permeation). It is also noticeable that the proportion of the soft phase in the copolymer determines the permeability of CO2. It was found that the codes with a greater soft/hard segment ratio (Pebax® 2533 and 3533) have also a greater permeability value (239 and 220 Barrer for Pebax® 2533 and 3533, respectively, measured by mixed gas permeation). Pebax® Renew® was the polymer with the best separation performance with CO2 permeabilities of 167 and 164 Barrer and CO2/N2 selectivities of 41 and 37, measured by single and mixed gas permeation, respectively. The comparison between the single and mixture gas permeation results revealed a relatively good correspondence between both for most of the Pebax® codes tuned by the solubility and diffusion properties of the polymers., Grants PID2019–104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged (Agencia Estatal de Investigación (AEI) and MCIN (Ministerio de Ciencia e Innovación), Spain). Grant T43–20R financed by the Aragón Government is gratefully acknowledged. L. Martínez-Izquierdo also thanks the Aragón Government (DGA) for her Ph.D. grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A new relevant membrane application: CO2 direct air capture (DAC)

  • Castro-Muñoz, Roberto
  • Zamidi Ahmad, Mohd
  • Malankowska, Magdalena
  • Coronas, Joaquín
Since carbon dioxide (CO2) is the primary greenhouse gas emitted into the atmosphere due to human activities, strong research efforts have been developed towards capturing and decreasing its production. Unfortunately, specific processes and activities make it impossible to avoid CO2 emissions. Among the different strategies scientists propose for CO2 reduction, direct CO2 capture from the atmosphere, also known as direct air capture (DAC), represents a promising alternative in which sorbents have been mainly used. Recently, gas separation membranes have also been speculated to carry out such a separation, thanks to their smaller footprint and simpler setup and operation; however, their application remains a proposition in the field. This paper gives a perspective of the ongoing research and attempts of DAC applications via membrane separation and introduces the main membrane materials and types used for CO2 separation. Finally, the process considerations for DAC using membranes are stated to guide the new researchers in the field., R. Castro-Muñoz acknowledges the School of Science and Engineering and the FEMSA-Biotechnology Center at Tecnológico de Monterrey for their support through the Bioprocess (0020209I13) Focus Group. R. Castro-Muñoz also acknowledges the financial support from Polish National Agency for Academic Exchange (NAWA) under Ulam Programme (agreement No. PPN/ULM/2020/1/00005/U/00001). Grants PID2019-104009RB-I00, funded by MCIN/AEI/10.13039/501100011033 (Agencia Estatal de Investigación (AEI) and MCIN (Ministerio de Ciencia e Innovación), Spain), and T43-20R, funded by the Aragón Government, are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis of ZIF-94 from recycled mother liquors: Study of the influence of its loading on postcombustion CO2 capture with pebax based mixed matrix membranes

  • Hasan, Md. Rafiul
  • Paseta, Lorena
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
Global energy demand is met in large part, by burning of fossil fuels, which is causing global warming. Mixed matrix membranes (MMMs) with metal organic frameworks (MOFs) as fillers are an interesting alternative for capturing post combustion CO2 which would make the energy sector sustainable. This research is focused on the synthesis of MOF ZIF-94 from the recycling of its mother liquors and the incorporation of synthesized MOF into a Pebax MH 1657 for MMM fabrication. The pH and the temperature of ZIF-94 synthesis are modified and monitored and this results in various nanoparticle diameters (average particle size in the range of 41 ± 8–180 ± 73 nm). Incorporation of ZIF-94 significantly improves the performance of the bare Pebax MH 1657 membrane. The maximum CO2/N2 selectivity and CO2 permeability are obtained for 10 wt% ZIF-94 loading in 9 wt% (polymer concentration in 70/30 (v/v) ethanol/water solution) Pebax MH 1657 matrix being 36 ± 7 (71% increment compared to bare membrane) and 137 ± 31 Barrer (80% improvement), respectively., This project received funding from the European Union Horizon 2020 research and innovation program under Grant Agreement No. 760944 (MEMBER project). Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 (Agencia Estatal de Investigación, Spain) and Grant T43-20R (the Aragón Government) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A facile route for the recovery of the ligand of zeolitic imidazolate framework ZIF-94/SIM-1

  • Berned-Samatán, Victor
  • Martínez-Izquierdo, Lidia
  • Abás, Elisa
  • Téllez, Carlos
  • Coronas, Joaquín
A facile route for the recycling of the organic ligand from ZIF-94/SIM-1 is reported with a recovery yield of 92.5 ± 2.8%. The recycled ligand was used for a new ZIF-94 synthesis compared to the one using fresh ligand. ZIF-94 was embedded in Pebax® 1657 mixed matrix membranes for gas separation of CO2/N2 and CO2/CH4 mixtures., Financial support from the Spanish research project PID2019-104009RB-I00/AEI/10.13039/501100011033 and the Aragón Government (T43_20R) are gratefully acknowledged. V. B.-S. Thanks the Spanish MINECO for the predoctoral grant BES-2017-080209 awarded. L. M.-I. Thanks the Aragón Government for her PhD grant. The authors would like to acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopias Avanzadas” at the University of Zaragoza. Dr Javier Lasobras is thanked for the carbon dioxide adsorption studies., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly stable Pebax® Renew® thin-film nanocomposite membranes with metal organic framework ZIF-94 and ionic liquid [Bmim][BF4] for CO2 capture

  • Martínez-Izquierdo, Lidia
  • Téllez, Carlos
  • Coronas, Joaquín
This article is part of the themed collection: Recent Open Access Articles., Ionic liquid (IL) [Bmim][BF4] and metal organic framework (MOF) ZIF-8 and ZIF-94 nanoparticles were incorporated into polymer Pebax® Renew® 30R51 to obtain highly efficient thin-film nanocomposite (TFN) membranes, ca. 300 nm thick. ZIF-94 particles were synthesized via a solvent assisted ligand exchange (SALE) from nano ZIF-8. To fabricate the membranes, the weight percentage of [Bmim][BF4] was firstly varied from 5 to 20 wt% to find the optimal IL content (10 wt%). Besides, ZIF-8 and ZIF-94 nanoparticles were separately incorporated (from 10 to 20 wt%) into the Pebax®/IL matrix to enhance the CO2 separation performance. Compared with the pristine Pebax® thin film composite (TFC) membrane, the IL (10 wt%) increased the CO2 permeance by 27% to 629 GPU and the CO2/N2 separation selectivity by 7% to 29 due to the enhancement in CO2 mass transport. After the incorporation of ZIFs, the CO2 permeance increased by 51% to 751 GPU and by 65% to 819 GPU, with 15 wt% loadings of ZIF-8 and ZIF-94, respectively, although the CO2/N2 separation selectivity decreased by 7% to 25 in both cases. Additional characterization was also carried out by the calculation of the permeation apparent activation energies for CO2 and N2 as well as the study of the long-term stability for up to 18 days. This demonstrated that the incorporation of the MOF enhanced the stability of the IL in the membrane, rendering it 55% and 35% more permeable (611 GPU) than the bare polymer and the membrane with only IL, respectively, while maintaining a CO2/N2 separation selectivity of 25., Grants PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged (Agencia Estatal de Investigación (AEI) and MCIN (Ministerio de Ciencia e Innovación), Spain). Grant T43-20R financed by the Aragón Government is gratefully acknowledged. L. Martínez-Izquierdo also thanks the Aragón Government (DGA) for her PhD grant. The authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación (SAI) and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopias Avanzadas” at the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimization of MIL-178(Fe) and Pebax® 3533 loading in mixed matrix membranes for CO2 capture

  • Hasan, Md. Rafiul
  • Zhao, Heng
  • Steunou, Nathalie
  • Serre, Christian
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
Global warming is considered as a consequence of extensive use of fossil fuels. Post combustion CO2 capture is an interesting and alternative solution where mixed matrix membranes (MMMs) can be an exciting candidate. This research focuses on the optimization of MMM composition consisting of Pebax® 3533 as the polymer matrix and porous coordination polymer (PCP) MIL-178(Fe) as a filler for gas separation application. MIL-178(Fe) characterized with SEM, TEM and TGA were applied to compare bare polymer and MMM. Optimum composition of the MMM obtained was 5 wt.% MIL-178(Fe) in Pebax® 3533. Average thickness of the optimized dense MMM was 116 ± 8 µm. Such MMM showed CO2 permeability and CO2/N2 selectivity of 312 ± 5 Barrer and 25.0 ± 0.5, respectively, 12% and 25% improved regarding the bare membrane. Additionally, optimum MMM was applied for CO2/CH4 separation and successfully compared in terms of improved CO2 permeability and CO2/CH4 selectivity., Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged (Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia e Innovación (MCIN), Spain). Grant T43-20R financed by the Aragón Government is gratefully acknowledged. The authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación (SAI) and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node "Laboratorio de Microscopias Avanzadas" at the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Double layers of polyamide/metal organic framework to improve the performance of membrane separation processes

  • Berned-Samatán, Victor
  • Paseta, Lorena
  • Echaide‐Górriz, Carlos
  • Coronas, Joaquín
  • Téllez, Carlos
Trabajo presentado a la 20th International Zeolite Conference, celebrada en Valencia (España) del 3 al 8 de julio de 2022., Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged (Agencia Estatal de Investigación (AEI) and MCIN (Ministerio de Ciencia e Innovación, Spain). V. B.-S. thanks the grant BES-2017-080209 funded by MCIN/AEI/ 10.13039/501100011033 and by "ESF Investing in your future"., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Covalent organic frameworks as an alternative to inorganic porous materials for mixed matrix membrane preparation

  • Martínez-Visus, Iñigo
  • Zornoza, Beatriz
  • Ulcuango, Matias
  • Coronas, Joaquín
  • Téllez, Carlos
Trabajo presentado a la 20th International Zeolite Conference, celebrada en Valencia (España) del 3 al 8 de julio de 2022., Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Synthesis of zeolitic imidazolane frameworks from recycled mother liquors: Application to CO2/N2 separation with Pebax® mixed matrix membranes

  • Hasan, Md. Rafiul
  • Paseta, Lorena
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
Trabajo presentado a la 20th International Zeolite Conference, celebrada en Valencia (España) del 3 al 8 de julio de 2022., This project has received funding from the European Union Horizon 2020 research and innovation program under grant agreement No 760944 (MEMBER project). Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Selective sugar conversion to mehyl lactate with heterogeneous nanostructured catalysts

  • Iglesia, Óscar de la
  • Navarro, Marta
  • Murillo, Beatriz
  • Zornoza, Beatriz
  • Rubio, César
  • Téllez, Carlos
  • Coronas, Joaquín
Trabajo presentado a la 20th International Zeolite Conference, celebrada en Valencia (España) del 3 al 8 de julio de 2022., Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Sostenible synthesis of crystalline porous organic frameworks for membrane aplications

  • Martínez-Visus, Iñigo
  • Ulcuango, Matias
  • Zornoza, Beatriz
  • Coronas, Joaquín
  • Téllez, Carlos
Trabajo presentado a la 20th International Zeolite Conference, celebrada en Valencia (España) del 3 al 8 de julio de 2022., Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged. Iñigo Martínez Visus would like to thank the grant PRE2020-092006 received from MCIN/AEI/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Preparation of thin selective MOF layer on hollow fibers by microfluidic technology for molecular separations

  • Zornoza, Beatriz
  • Malankowska, Magdalena
  • Paseta, Lorena
  • Echaide‐Górriz, Carlos
  • Téllez, Carlos
  • Coronas, Joaquín
Trabajo presentado a la 20th International Zeolite Conference, celebrada en Valencia (España) del 3 al 8 de julio de 2022., This project has received funding from the European Union´s Horizon 2020 research and innovation program under grant agreement No 862330 (INNOMEM project). Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Solventless synthesis of ZIF-L and ZIF-8 with hydraulic press and high temperature

  • Pérez-Miana, Marta
  • Reséndiz-Ordóñez, Javier U.
  • Coronas, Joaquín
Trabajo presentado a la 20th International Zeolite Conference, celebrada en Valencia (España) del 3 al 8 de julio de 2022., Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged. M. P.-M. thanks the Aragón Government as well for her PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Double-layered Pebax® 3533/ZIF-8 membranes with single-walled carbon nanotube buckypapers as support for gas separation

  • Berned-Samatán, Victor
  • Téllez, Carlos
  • Coronas, Joaquín
This article belongs to the Special Issue Research Progress of Metal-Organic-Framework (MOF) Membranes., Single-walled carbon nanotube buckypapers (SWCNT-bps) coated with a metal–organic framework ZIF-8 layer were used as supports for the preparation of Pebax® 3533 TFC membranes by both phase inversion and spin coating techniques. Upon proper characterization of the materials by X-ray diffraction, IR spectroscopy, thermogravimetry and electron microscopy, the obtained membranes were tested in gas separation experiments with a 15:85 CO2/N2 mixture. These experiments proved that the ZIF-8 layer prevented from the penetration of the polymer selective film into the SWCNT-bp support, giving rise to a highly permeable selective membrane. The optimum membrane was achieved by the spin-coating method, with better permeation results than that prepared by the phase inversion method, obtaining a CO2 permeance of 566 GPU together with a CO2/N2 selectivity of 20.9., Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged (Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia e Innovación (MCIN), Spain). Financial support from the Aragón Government is also gratefully acknowledged (T43_20R). V.B.-S. thanks the Grant BES-2017-080209 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fast synthesis of zeolitic imidazolate framework ZIF-94 using NaOH and recycling reagents

  • Paseta, Lorena
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
ZIF-94 is a zeolitic imidazolate framework with the same SOD type topology than ZIF-8 but with an aldehyde group functionalized organic ligand. This turns ZIF-94 less thermally stable than ZIF-8 but with interesting properties of water and carbon dioxide adsorption, making the former a material highly suitable for carbon capture technologies. In this work, an alternative procedure for the synthesis of ZIF-94 was developed based on the use of NaOH as deprotonator. Besides, the crystallization was carried out in a very short time (1–20 min) at room temperature while centrifuging at 10,000 rpm. This made possible the simultaneous crystallization and separation of the product material giving rise, together with the use of the inorganic deprotonator, to a very efficient process with crystallization yields higher than 65%. For the best conditions tested (crystallization-centrifugation time of 5 min), 66 ± 24 nm in particle size, highly crystalline ZIF-94 with 485 m2 g−1 of specific surface area was obtained at a crystallization yield of 66.9%. Similar properties were obtained for ZIF-94 when prepared from recycled reagents (solvent, ligand and Zn salt)., Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 from the Spanish Agencia Estatal de Investigación (AEI) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanofiltration with polyamide thin film composite membrane with ZIF-93/SWCNT intermediate layers on polyimide support

  • Berned-Samatán, Victor
  • Piantek, Marten
  • Coronas, Joaquín
  • Téllez, Carlos
Among current separation processes, nanofiltration (NF), besides its easy scalability, exhibits low energy consumption, environmental impact and footprint, being widely used for water treatment and solvent recovery. The development of membranes for NF involves perfecting the skin selective layer, the sublayers and the support. In this work, a multilayer structure membrane is presented where a selective layer of polyamide (PA, thickness 40–60 nm) was interfacially polymerized on a sub-layer of MOF ZIF-93 (thickness ∼ 50 nm) grown on another sub-layer of single-walled carbon nanotubes (SWCNT, thickness ∼ 400 nm) vacuum filtrated on an asymmetric polyimide P84® support (thickness ∼ 200 μm). The membrane with structure PA/ZIF-93/SWCNT/P84 showed excellent results in water NF and methanol organic solvent NF of different dyes (with the highest values of water and methanol permeances of up to 57.6 and 84.5 L·m−2·h−1·bar−1, respectively, with rejections usually greater than 99%). By means of a wide range of characterization techniques (contact angle, AFM, XRD, ATR-FTIR and FIB-SEM) the role of every component in the membrane was elucidated. In fact, the presence of the sublayer of ZIF-93 increased the roughness and hydrophilicity as well as decreased the thickness of the PA layer. These effects are related to the fact that the sublayers subordinate the interfacial polymerization as well as influence the properties of the PA film and therefore its NF performance, even showing chlorine resistance as well as ten-day cross-flow NF stability., Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged (Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia e Innovación (MCIN), Spain). Financial support from the Aragón Government is also gratefully acknowledged (T43-20R). V. B.-S. thanks the Grant BES-2017-080209 funded by MCIN/AEI/ 10.13039/501100011033 and by “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Organic solvent-free fabrication of thin film polyamide/zeolitic imidazolate framework membranes for removal of dyes from water

  • Luque-Alled, José Miguel
  • Martínez-Izquierdo, Lidia
  • Gorgojo, Patricia
  • Téllez, Carlos
  • Coronas, Joaquín
Thin film composite (TFC) polyamide (PA) membranes in combination with zeolitic imidazolate frameworks (ZIF), such as ZIF-8 and ZIF-93, have been fabricated using a novel approach based on vapor phase interfacial polymerization (VIP). These membranes have been investigated for nanofiltration (NF) of aqueous solutions of organic dyes, such as Rose Bengal (RB, 1017 Da), Sunset Yellow (SY, 452 Da) and Acridine Orange (AO, 265 Da). The preparation of the PA layer by VIP technique avoids the use of any organic solvent that is typically required in the conventional PA synthesis. Both ZIF-8 and ZIF-93 were initially synthesized using conventional procedures (methanol-based route) and incorporated to the PA layer in two different configurations: i) thin film nanocomposite with ZIF embedded within the PA film, and ii) bilayer membranes with a layer of ZIF between the support and the PA layer. The synthesis of ZIF-93 using a water-based route was developed for the bilayer configuration allowing for an organic solvent-free fabrication of PA/ZIF-93 bilayer VIP-TFC. These membranes showed the highest water permeances of 2.6, 3.4 and 2.2 L m-2h−1 bar−1 for RB, SY and AO, respectively. As compared to the control membrane VIP-TFC, this represents permeance increases of 69–117% and maintains high (greater than 99%) rejection of all the organic dyes. Membrane characterization demonstrated that the permeance enhancement for bilayer PA/ZIF-93 VIP-TFCs is related to an improved hydrophilicity, higher surface roughness and thinner selective layers. The prepared membranes demonstrated excellent cycle stability, maintaining their initial water permeance and dye rejection throughout 34 h of long-term operation, and being able to operate across the entire pH range studied (pH 3 to 9) without any detrimental effects on performance., This work was supported by Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 («Agencia Estatal de Investigación» (AEI) and «Ministerio de Ciencia e Innovación» (MCIN), Spain); Margarita Salas and Juan de la Cierva programmes funded by Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund; Grant RYC2019-027060-I funded by MICIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”; and financial support from the Aragón Government (Grant T68-23R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Green and fast strategies for energy-efficient preparation of the covalent organic framework TpPa-1

  • Martínez-Visus, Iñigo
  • Ulcuango, Matias
  • Zornoza, Beatriz
  • Coronas, Joaquín
  • Téllez, Carlos
Three synthesis procedures for the covalent-organic framework (COF) TpPa-1 are studied with the purpose of setting up the most promising one in a fast and green way, leading to a more environmentally friendly and sustainable process. With conventional heating, good crystallinity and a high BET specific surface area (SSA) of up to 1007 m2 ⋅ g-1 are achieved at 170 °C for 3 days using water as the quintessential green solvent. However, the application of microwave radiation in the synthesis for this crystalline porous polymer allows reaction times to be shortened to 30 min while maintaining structural and textural properties (BET SSA of 928 m2 ⋅ g-1 ) and obtaining yields close to 98 % (vs. 90 % in the hydrothermal synthesis). The water-assisted mechanochemical synthesis is also an environmentally friendly synthetic approach; with heating at 170 °C in a two-step process (10+10 min), high crystallinity is achieved, a BET SSA of 960 m2 ⋅ g-1 and a yield of 98 % for TpPa-1., This research gratefully acknowledges grant PID2019-104009RB−I00 funded by MCIN/AEI/10.13039/501100011033 (Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia e Innovación (MCIN), Spain). Grant PRE2020-092006 funded by MCIN/AEI/ 10.13039/501100011033 and by “ESF Investing in your future” is gratefully acknowledged by Í. Martínez-Visus., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microfluidic preparation of thin film composite hollow fiber membrane modules for water nanofiltration: Up-scaling, reproducibility and MOF based layers

  • Esteras-Saz, Javier
  • Paseta, Lorena
  • Echaide‐Górriz, Carlos
  • Malankowska, Magdalena
  • Luque-Alled, José Miguel
  • Zornoza, Beatriz
  • Téllez, Carlos
  • Coronas, Joaquín
[Background] The commercialization of thin film composite (TFC) hollow fiber (HF) membranes remains challenging owing to issues associated with membrane manufacturing., [Methods] TFC membranes were synthesized by microfluidic interfacial polymerization of polyamide (PA) on polysulfone hollow fiber (HF) membrane modules. A total of 33 HF membrane modules were prepared with different number of HFs (from 1 to 25) and different lengths (from 10 to 50 cm). They were evaluated in a nanofiltration operation in terms of water permeance and rose Bengal (RB) and MgSO4 rejections., [Significant findings] Among the 33 modules, 73% showed RB rejections higher than 95%, while 36% of the modules reached rejections above 99%. During the membrane synthesis, different parameters, such as PA monomer concentration, residence time and reaction time, were studied. As a result, the amount of monomer was reduced by ca. 80%. The versatility of microfluidics allowed incorporating hydrophilic metal-organic framework (MOF) ZIF-93 to produce HF modules with PA/MOF bilayered membranes (a continuous layer of MOF between the support and the PA film) which led to an important enhancement of the water permeance from 1.3 (bare PA membrane) to 5.3 L·m−2·h−1·bar−1 (PA/ZIF-93 HF membrane), maintaining RB rejection above 95%., This work has been performed in the frame of the INNOMEM project that has received funding from the European Union's Horizon 2020 Research and Innovation Program under Grant Agreement N° 862330. In addition, financial support from the Research Project PID2019-104009RB-I00/AEI/10.13039/501100011033, the Aragón Government (T68-23R), and the ESF are gratefully acknowledged. J. M. Luque-Alled acknowledges the Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund for funding through the Margarita Salas and Juan de la Cierva programmes., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sustainable β- and γ-cyclodextrins for development of highly permeable thin film composite nanofiltration membranes

  • Pina-Vidal, Cristina
  • Luque-Alled, José Miguel
  • Coronas, Joaquín
  • Téllez, Carlos
The use of macromolecules, such as cyclodextrins (CDs), given their porosity and compatibility with organic materials, are very attractive for the progress of polymeric membranes in nanofiltration (NF) of aqueous dye solutions. Two types of membranes were fabricated. Firstly, β- and γ-CDs were incorporated to polyamide (PA) thin film composite (TFC) membranes. These membranes, named CD/MPD-TMC, were prepared by conventional interfacial polymerization —i.e., an aqueous solution of m-phenylenediamine (MPD) followed by a solution of trimesoyl chloride (TMC) in hexane— by replacing a certain amount of the MPD monomer with varying proportions of CDs. Secondly, two-step double-IP (TD-IP) membranes were fabricated as follows: CDs were deposited atop the polymer support, followed by addition of TMC —forming a polyester (PE) layer—, and subsequently the membrane surface was modified with MPD molecules. In both CD/MPD-TMC and TD-IP membranes, the presence of CDs improved the membrane performance, the latter configuration leading to much higher water permeances. The TD-IP membrane using β-CD achieved the highest water permeance of 10 L m−2 h−1·bar−1 (LMH bar−1) and a rejection of acridine orange dye (265 Da) greater than 98 %. This represents a 6-fold increase in water permeance compared to bare PA (1.6 LMH bar−1). The enhanced water transport was mainly attributed to the more hydrophilic nature of the membranes and the presence of a PE layer with a porous structure and high pore connectivity. High dye rejection resulted from electrostatic and Donnan repulsions due to surface modification with MPD molecules., This research gratefully acknowledges grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 (Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia e Innovación (MCIN), Spain). J. M. Luque-Alled acknowledges Grant FJC2021-047822-I funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, and Margarita Salas funded by Ministerio de Universidades and by the European Union NextGenerationEU/PRTR. In addition, financial support from the Aragón Government (T43-20R, T68_23R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly permeable ZIF-8 membranes for C2H4/C2H6 separation in a wide temperature range

  • Pérez-Miana, Marta
  • Coronas, Joaquín
  • Hedlund, Jonas
  • Yu, Liang
Ethylene/ethane separation is a critical and energy-consuming process in the chemical industry due to the similar properties of the compounds and the great need of ethylene for e.g., polymer production. Many materials have been studied for their implementation as membranes as an energetically favorable alternative to conventional distillation and adsorption processes. Metal-organic frameworks (MOF) have revealed promising properties as highly permeable and selective membranes. Among the most studied and promising MOF candidates is ZIF-8, known for its thermal stability and small pores connected by narrow-sized windows. In this work, we present an analysis of the influence of parameters such as temperature, feed pressure and feed flowrate on the separation of ethylene/ethane through a thin ZIF-8/alumina disc membrane. We observed that the temperature has a significant effect on the separation. The ethylene permeance increased with decreased temperature and reached 8.1 × 10−7 mol/(m2·s·Pa) at −30 °C. At this temperature, the ethylene/ethane selectivity was 2.5. The study concluded with a considerable enhancement of the permeance of ZIF-8 membranes for ethylene/ethane separations, while maintaining a good selectivity compared to the reported values in the literature. The results have important implications for the development of more cost-effective and energy-efficient membrane-based separation technologies for ethylene purification., Financial support from the grants PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 and T68_23R from the Aragón Government is gratefully acknowledged. M. P.-M. thanks also the Aragón Government for her PhD grant and Fundación CAI for her grant intended to cover the costs of the stay, as well as for a scholarship in the Iberus + project managed by Campus Iberus and co-financed by the Erasmus + program of the European Union. Bio4Energy, a Strategic Research Environment supported through the Swedish Government's Strategic Research Area initiative is also acknowledged for the financial support of this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microwave-assisted synthesis of metal–organic frameworks UiO-66 and MOF-808 for enhanced CO2/CH4 separation in PIM-1 mixed matrix membranes

  • Yahia, Mohamed
  • Lozano, Luis A.
  • Zamaro, Juan M.
  • Téllez, Carlos
  • Coronas, Joaquín
This study presents a sustainable microwave-assisted synthesis, based on the use of acetone and a water/acetic acid mixture instead of typical harmful DMF, to fabricate Zr-metal–organic frameworks (MOFs) UiO-66 and MOF-808 as fillers in a PIM-1 matrix for gas separation application. The mixed matrix membranes (MMMs) were prepared with varying loadings (2.5–10 wt%) of MOFs. The physicochemical properties (1H NMR, FTIR, XRD, N2 adsorption, TGA and SEM) of the resulting PIM-1, MOFs and MMMs were analyzed. The CO2/CH4 separation performance and membrane aging characteristics of the MMMs were evaluated. The incorporation of MOF fillers significantly improved CO2 permeability and CO2/CH4 selectivity, attributed to their CO2-philicity and narrow pore size (UiO-66 ≈ 0.6 nm and MOF-808 ≈ 1.8 nm). The MMMs with higher filler loadings (7.5 and 10 wt%) exhibited the most favorable separation performance. Due to the better crystallinity and textural properties, MOF-808 produced the best separation results at 10 wt% filler loading (a CO2/CH4 separation selectivity of 16.2 at 9090 Barrer of CO2 permeability). Aging led to a decrease in CO2 permeability but a slight increase in CO2/CH4 selectivity for all MMMs. Overall, the study highlights the potential of PIM-1/UiO-66 and PIM-1/MOF-808 MMMs as efficient materials for (CO2/CH4) separation comparing with the pristine PIM-1., This research acknowledges (TED2021-130621B-C41) grant supported by the European Union-NextGenerationEU, Ministerio de Ciencia e Innovación/MCIN, and the Spanish Agencia Estatal de Investigación/AEI. Also, the (PID2019-104009RB-I00) grant funded by (MCIN/AEI/10.13039/501100011033, AEI-MCIN, Spain). M. Yahia acknowledges the María Zambrano programme funding that supported by the Spanish Ministerio de Universidades and the European Union-NextGenerationEU. In addition, the authors thank the Aragón Government (T68_23R) financial support. Authors acknowledge at Universidad de Zaragoza (UNIZAR) (the Servicio General de Apoyo a la Investigación-SAI and the National Facility ELECMI ICTS, node Laboratorio de Microscopias Avanzadas) for the technical guides and instrumentation using. L.A. Lozano and J.M. Zamaro acknowledge the funding (Project PICT 1880) via the Agencia Nacional de Promoción Científica y Tecnológica of Argentina., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

ZIF-8 modified with 2-undecylimidazolate as filler for mixed matrix membranes for CO2 separation

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Yahia, Mohamed
  • Mayoral, Álvaro
  • Coronas, Joaquín
A novel modification of zeolitic imidazolate framework-8 (ZIF-8) with 2-undecylimidazolate (umIm) was explored to enhance its hydrophobic character and improve its compatibility with polymer of intrinsic microporosity PIM-1 when incorporated as a filler in mixed matrix membranes (MMMs). In addition to the study of the best conditions to exchange the structural ligand of ZIF-8 by umIm and the characterization (by FTIR, RMN, XRD, TGA, N2 adsorption and TEM) of the obtained material, comparative analyses were conducted using MMMs containing the original ZIF-8 and the modified version. Different loadings were applied to study the impact on gas separation properties. Remarkably, the MMM with the modified ZIF-8 demonstrated superior performance surpassing the Robeson upper bound line of 2008 and revealing the effectiveness of this MOF modification strategy. In fact, with the 10 wt% ZIF-8-umIm loading MMM, the highest value of CO2/N2 selectivity was 15.4 (12% higher than that of bare PIM-1) at a CO2 permeability of 16 667 Barrer (52% higher than that of bare PIM-1). These findings highlight the promising potential of the ZIF-8 modification with umIm as a valuable filler material for MMMs in gas separation applications., This research acknowledges grant TED2021-130621B-C41 by Spanish Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia e Innovación (MCIN) and the European Union-NextGeneration EU. Also, grants PID2019-104009RB-I00 and PID2022-138582OB-I00, funded by AEI-MCIN, Spain, are acknowledged. In addition, financial support from the Aragón Government (T68_23R and M. P.-M. PhD grant) is thanked. M. Yahia acknowledges the Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund for funding through the María Zambrano programme. J. M. Luque-Alled acknowledges the Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund for funding through the Margarita Salas and Juan de la Cierva programmes. A. Mayoral acknowledges the Spanish Ministry of Science through the Ramon y Cajal programme (RYC2018-024561-I) and to regional government of Aragon (DGA E13_23R). Authors acknowledge Servicio General de Apoyo a la Investigación-SAI and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node Laboratorio de Microscopias Avanzadas, both at Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrasmall functionalized UiO-66 nanoparticle/polymer Pebax 1657 thin-film nanocomposite membranes for optimal CO2 separation

  • Martínez Orellana, Lidia
  • García-Comas, Cristina
  • Dai, Shan
  • Navarro, Marta
  • Tissot, Antoine
  • Serre, Christian
  • Téllez, Carlos
  • Coronas, Joaquín
Ultrasmall 4 to 6 nm nanoparticles of the metal-organic framework (MOF) UiO-66 (University of Oslo-66) were successfully prepared and embedded into the polymer Pebax 1657 to fabricate thin-film nanocomposite (TFN) membranes for CO2/N2 and CO2/CH4 separations. Furthermore, it has been demonstrated that ligand functionalization with amino (-NH2) and nitro (-NO2) groups significantly enhances the gas separation performance of the membranes. For CO2/N2 separation, 7.5 wt % UiO-66-NH2 nanoparticles provided a 53% improvement in CO2 permeance over the pristine membrane (from 181 to 277 GPU). Regarding the CO2/N2 selectivity, the membranes prepared with 5 wt % UiO-66-NO2 nanoparticles provided an increment of 17% over the membrane without the MOF (from 43.5 to 51.0). However, the CO2 permeance of this membrane dropped to 155 GPU. The addition of 10 wt % ZIF-94 particles with an average particle size of ∼45 nm into the 5 wt % UiO-66-NO2 membrane allowed to increase the CO2 permeance to 192 GPU while maintaining the CO2/N2 selectivity at ca. 51 due to the synergistic interaction between the MOFs and the polymer matrix provided by the hydrophilic nature of ZIF-94. In the case of CO2/CH4 separation, the 7.5 wt % UiO-66-NH2 membrane exhibited the best performance with an increase of the CO2 permeance from 201 to 245 GPU., Grant PID2019-104009RB-I00 funded by MCIN/AEI/10.13039/501100011033 is gratefully acknowledged (Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia e Innovación (MCIN), Spain). Also, this research acknowledges (TED2021-130621B-C41) grant supported by the European Union-NextGenerationEU, Ministerio de Ciencia e Innovación/MCIN, and the Spanish Agencia Estatal de Investigación/AEI. Grant T68-23R financed by the Aragón Government is gratefully acknowledged. L.M.-I. also thanks the Aragón Government (DGA) for her PhD grant. The authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación (SAI) and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopias Avanzadas” at the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancing CO2/CH4 separation performance in PIM-1 based MXene nanosheets mixed matrix membranes

  • Yahia, Mohamed
  • Refaat, Dalia
  • Coronas, Joaquín
  • Téllez, Carlos
This study presents an approach by integrating MXene nanosheets (Ti2C3Tx) into polymer of intrinsic microporosity (PIM-1) matrix to develop mixed matrix membranes (MMMs) for biogas upgrading. Different concentrations (1–5 wt%) of MXene were incorporated into PIM-1, and the resulting materials were characterized to 1H NMR, FTIR, XRD, TGA, nitrogen adsorption, SEM and EDS to assess their physicochemical properties. The research focused on evaluating the gas separation performance, particularly CO2/CH4 separation, as well as the aging behavior of the MMMs. The incorporating of MXene nanosheets significantly enhanced the CO2 permeability and selectivity of PIM-1 by enhancing gas solubility and diffusivity. The most promising results were observed at 5 wt% filler loading, achieving a 13.5 CO2/CH4 separation selectivity at 7652 Barrer of CO2 permeability. In all membranes with aging time (60 days), there was a decrease in CO2 permeability and a slight increase in CO2/CH4 selectivity, observing that the introduction of MXene slightly mitigates the physical aging process in the PIM-1 polymer. Additionally, the permeability tests revealed higher CO2 permeability and (CO2/CH4) selectivity values for mixed gases compared to single gases. Overall, the study highlights the potential of MXene/PIM-1 MMMs as effective materials for CO2/CH4 separation, outperforming pristine PIM-1., This recent investigation is acknowledging the grants: 1. PID2019-104009RB-I00 (funded by MICIU/AEI/10.13039/501100011033/), 2. PID2022-138582OB-I00 (funded by MICIU/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), 3. TED2021-130621B-C4 (funded by MICIU/AEI/10.13039/501100011033/ and The “European Union Next-Generation-EU/PRTR”), 4. CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033. M. Yahia's is supported through “the María Zambrano program” funded by both “the European Union's Next-Generation-EU” and “the Spanish Ministerio de Universidades”. Financial assistance from “the Government of Aragón (T68_23R)” is also recognized. Furthermore, technical guidance and instrumentation provided by “the Universidad de Zaragoza/UNIZAR” through “the national facility ELECMI ICTS”, “the Servicio General de Apoyo a la Investigación-SAI”, and “Laboratorio de Microscopías Avanzadas”, are appreciated., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of the delamination of zeolitic imidazolate framework ZIF-7-III on the conversion of sucrose into methyl lactate

  • Navarro, Marta
  • Iglesia, Óscar de la
  • Téllez, Carlos
  • Coronas, Joaquín
The catalytic conversion of sugars to methyl lactate has been in the spotlight of the scientific community in the last decades. In this context, delaminated materials can provide better catalytic performances than their precursors, since they have a better accessibility to their active sites. In order to improve the yield to methyl lactate (ML), new delaminated material ZIF-7-III_EX was synthesized from the exfoliation of the dense Zn-based zeolitic imidazolate framework ZIF-7-III. Different techniques, namely XRD, SEM, TEM, thermogravimetric analysis and CO2 adsorption, were carried out to characterize the obtained materials as well as to verify the exfoliation of the precursor. Regarding the catalytic results, as-synthesized ZIF-7 showed a promising yield to ML, 41.2 %, superior to that achieved by ZIF-9 (based on Co instead of Zn). In addition, the delaminated material ZIF-7-III_EX reached a ML yield of 69.1 %, which implies 67.7 % and 97.4 % of improvements with respect to ZIF-7 and to ZIF-7-III, respectively. The reuse of some selected catalyst materials derived from ZIF-7-III was also studied., This work gratefully acknowledges grants PID2022-138582OB-I00 (funded by MICIU/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”), PID2019-104009RB-I00 funded by MICIU/AEI/10.13039/501100011033 and CEX2023-001286-S (funded by MICIU/AEI/10.13039/501100011033/). Financial assistance from the Government of Aragón (T68_23R) is also acknowledged. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node « Laboratorio de Microscopias Avanzadas (LMA) » at « Universidad de Zaragoza»., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Study for CO2 separation with poly(ethylene oxide terephthalate)-poly(butylene terephthalate) multiblock copolymer membranes: Approaching a greener solvent preparation

  • Martínez-Visus, Iñigo
  • Téllez, Carlos
  • Coronas, Joaquín
Data will be made available on request., Green solvent alternatives for the multiblock copolymer PolyActive™ were selected to test their effectiveness in membrane fabrication for gas separation. Solubility tests were conducted to assess the solvent-polymer compatibility, followed by membrane fabrication using a drop casting-solution method. Ethyl lactate was identified as a potential greener solvent, compared to more commonly used solvents like chloroform and tetrahydrofuran, as it maintained the membrane conformation, thermal and chemical stability, and thermal degradation characteristics as demonstrated by membrane characterization using SEM, FTIR, TGA and DSC. Single gas transport parameters (permeability, diffusivity and solubility) for N2, H2, CH4, He and CO2 were obtained via the time-lag method for the prepared membranes. A temperature dependence study was conducted in the 25–70 °C range, calculating activation energies for gas transport properties and ideal selectivities. Mixed gas measurements were also performed, comparing separation selectivities to those (ideal selectivities) obtained in single gas, indicating a potential competitive adsorption effect between less permeable species, leading to more selective separation in gas mixture. Membranes prepared with different polymer concentrations (1, 2 and 5 wt%) in ethyl lactate achieve a CO2/N2 ideal selectivity of up to 50.4 at a CO2 permeability of 179 Barrer. This enhanced performance was attributed to ethyl lactate higher boiling point, resulting in a more densely packed polymer structure as reflected by the higher crystallinity and lower fractional free volume measured through XRD, DSC and pycnometry analyses., This work gratefully acknowledges grants PID2022–138582OB-I00 (funded by MICIU/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), PID2019–104009RB-I00 (funded by MICIU/AEI/10.13039/501100011033) and CEX2023–001286-S (funded by MICIU/AEI/10.13039/501100011033/). I. Martínez-Visus was supported through grant PRE2020–092006 (funded by MCIN/AEI/ 10.13039/501100011033 and by “ESF Investing in your future”). Financial assistance from the Government of Aragón (T68_23R) is also acknowledged. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node «Laboratorio de Microscopias Avanzadas (LMA)» at «Universidad de Zaragoza». Finally, Prof. Dr Steven Abbott is thanked for providing estimation of Hansen solubility parameters of PolyActive™., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhanced piezoelectric fibered extracellular matrix to promote cardiomyocyte maturation and tissue formation: a 3d computational model

  • Urdeitx, P.
  • Doweidar, M.H.
Mechanical and electrical stimuli play a key role in tissue formation, guiding cell processes such as cell migration, differentiation, maturation, and apoptosis. Monitoring and controlling these stimuli on in vitro experiments is not straightforward due to the coupling of these different stimuli. In addition, active and reciprocal cell–cell and cell–extracellular matrix interactions are essential to be considered during formation of complex tissue such as myocardial tissue. In this sense, computational models can offer new perspectives and key information on the cell microenvironment. Thus, we present a new computational 3D model, based on the Finite Element Method, where a complex extracellular matrix with piezoelectric properties interacts with cardiac muscle cells during the first steps of tissue formation. This model includes collective behavior and cell processes such as cell migration, maturation, differentiation, proliferation, and apoptosis. The model has employed to study the initial stages of in vitro cardiac aggregate formation, considering cell–cell junctions, under different extracellular matrix configurations. Three different cases have been purposed to evaluate cell behavior in fibered, mechanically stimulated fibered, and mechanically stimulated piezoelectric fibered extra-cellular matrix. In this last case, the cells are guided by the coupling of mechanical and electrical stimuli. Accordingly, the obtained results show the formation of more elongated groups and enhancement in cell proliferation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Metal organic framework top-down and bottom-up patterning techniques

  • Ruiz-Zambrana, C.L.
  • Malankowska, M.
  • Coronas, J.
Metal organic frameworks (MOFs) have recently attracted considerable research interest in several fields from coordination chemistry and materials science to engineering and medicine not only due to energy and environmental issues but also due to the need for new paradigms of efficiency and sustainability according to the requirements of the 21st century global society. Because of their crystalline and organic-inorganic nature, they are able to crystallize constituting intergrown architectures ductile enough to be patterned, with the use of appropriate techniques, as nano- and micro-devices with multiple applications. This perspective comprehensively summarizes the recent state of the art in the use of top-down and bottom-up methodologies to create MOF structures with a defined pattern at the nano- and micro-scale.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Green Preparation of Thin Films of Polybenzimidazole on Flat and Hollow Fiber Supports: Application to Hydrogen Separation

  • Sanchez-Lainez, J.
  • Etxeberria-Benavides, M.
  • David, O.
  • Tellez, C.
  • Coronas, J.
This work shows the preparation of thin films, with thickness from 70 nm to 1 mu m, of meta-polybenzimidazole (m-PBI) on polyimide P84 supports. Ethanolic solutions of m-PBI were used to coat flat and hollow fiber supports of asymmetric P84 with m-PBI in a process where the coating and drying was performed at room temperature. A solution of NaOH in EtOH allowed the dissolution of the m-PBI powder, providing the perfect coating solution to build thin films of m-PBI without damaging the polymeric support. It also meant a green alternative, avoiding the use of toxic solvents, such as dimethylacetamide. The resulting membranes have been tested for the separation of H-2 mixtures at high temperature at different setups to allow checking their reproducibility. With 100 nm thickness the membranes showed their best gas separation performance. For flat membranes at 180 degrees C and 3 bar feed pressure a H-2 permeance of 48.5 GPU was obtained, with respective H-2/CO2 and H-2/N-2 selectivities of 33.3 and 55.8. Besides, the hollow fibers under a feed pressure of 6 bar and tested at the same temperature showed near 90 GPU of H-2 with a H-2/CO2 selectivity of 13.5 in the one-fiber module and over 39 GPU of H-2 with a H-2/CO2 selectivity of 20.2 in the five-fiber module. Finally, the stability of the membranes was proved for 22 days at 180 degrees C.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Complex free-space magnetic field textures induced by three-dimensional magnetic nanostructures

  • Donnelly, C
  • Hierro-Rodriguez, A
  • Abert, C
  • Witte, K
  • Skoric, L
  • Sanz-Hernandez, D
  • Finizio, S
  • Meng, FF
  • McVitie, S
  • Raabe, J
  • Suess, D
  • Cowburn, R
  • Fernandez-Pacheco, A
The design of complex, competing effects in magnetic systems-be it via the introduction of nonlinear interactions(1-4), or the patterning of three-dimensional geometriesm-is an emerging route to achieve new functionalities. In particular, through the design of three-dimensional geometries and curvature, intrastructure properties such as anisotropy and chirality, both geometry-induced and intrinsic, can be directly controlled, leading to a host of new physics and functionalities, such as three-dimensional chiral spin states(7), ultrafast chiral domain wall dynamicss(8-10) and spin textures with new spin topologies(7, 11). Here, we advance beyond the control of intrastructure properties in three dimensions and tailor the magnetostatic coupling of neighbouring magnetic structures, an interstructure property that allows us to generate complex textures in the magnetic stray field. For this, we harness direct write nanofabrication techniques, creating intertwined nanomagnetic cobalt double helices, where curvature, torsion, chirality and magnetic coupling are jointly exploited. By reconstructing the three-dimensional vectorial magnetic state of the double helices with soft-X-ray magnetic laminography(12, 13), we identify the presence of a regular array of highly coupled locked domain wall pairs in neighbouring helices. Micromagnetic simulations reveal that the magnetization configuration leads to the formation of an array of complex textures in the magnetic induction, consisting of vortices in the magnetization and antivortices in free space, which together form an effective B field cross-tie wall''s. The design and creation of complex three-dimensional magnetic field nanotextures opens new possibilities for smart materials(15), unconventional computing(2, 16), particle trapping(17, 18) and magnetic imaging(19).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Solventless synthesis of ZIF-L and ZIF-8 with hydraulic press and high temperature

  • Pérez-Miana, M.
  • Reséndiz-Ordóñez, J.U.
  • Coronas, J.
In recent years, alternative methods to conventional synthesis of MOFs (metal-organic frameworks) have emerged due to the problematic use of solvents for both the environment and human health. Here we present the synthesis of ZIFs (zeolitic imidazolate frameworks) at high pressure by means of a hydraulic press provided with a heating mechanism. By the optimization of parameters such as temperature, time and the addition of promotor NH4NO3, a considerable increase in the reaction yield was achieved in products, neither washed nor activated, obtained since the first minute of reaction. Depending on the operation conditions, ZIF-L appeared as competing phase with ZIF-8. Upon transformation of ZIF-L into ZIF-8 in presence of ethanol, a reaction yield of 58.2% was achieved to highly crystalline ZIF-8 with a BET specific surface area of 947 m2/g. This green, fast, versatile and improved method suggests a possible way to future synthesis of other MOFs and the possibility of their industrial implementation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Synthesis of ZIF-94 from Recycled Mother Liquors: Study of the Influence of Its Loading on Postcombustion CO2 Capture with Pebax Based Mixed Matrix Membranes

  • Hasan, M.R.
  • Paseta, Lorena
  • Malankowska, M.
  • Téllez, Carlos
  • Coronas, Joaquín
Global energy demand is met in large part, by burning of fossil fuels, which is causing global warming. Mixed matrix membranes (MMMs) with metal organic frameworks (MOFs) as fillers are an interesting alternative for capturing post combustion CO2 which would make the energy sector sustainable. This research is focused on the synthesis of MOF ZIF-94 from the recycling of its mother liquors and the incorporation of synthesized MOF into a Pebax MH 1657 for MMM fabrication. The pH and the temperature of ZIF-94 synthesis are modified and monitored and this results in various nanoparticle diameters (average particle size in the range of 41 ± 8–180 ± 73 nm). Incorporation of ZIF-94 significantly improves the performance of the bare Pebax MH 1657 membrane. The maximum CO2/N2 selectivity and CO2 permeability are obtained for 10 wt% ZIF-94 loading in 9 wt% (polymer concentration in 70/30 (v/v) ethanol/water solution) Pebax MH 1657 matrix being 36 ± 7 (71% increment compared to bare membrane) and 137 ± 31 Barrer (80% improvement), respectively. © 2021 The Authors. Advanced Sustainable Systems published by Wiley-VCH GmbH
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A comparative study between single gas and mixed gas permeation of polyether-block-amide type copolymer membranes

  • Martínez-Izquierdo, L.
  • Perea-Cachero, A.
  • Malankowska, M.
  • Téllez, C.
  • Coronas, J.
We analyze the gas separation performance of five polyether-block-amide type copolymers (Pebax® 1657, Renew®, 2533, 3533 and 4533). These codes are composed of different hard and rubbery segments with different proportions. Dense membranes were prepared by the casting-solution method and studied by elemental, thermogravimetric and X-ray diffraction analyses, FTIR-ATR spectroscopy and single and mixed gas permeation. Codes with the best separation performance are those of polyethylene oxide as the soft phase (Pebax® 1657 and Renew®) due to the more intense interactions of this segment with CO2, which increases the CO2/N2 solubility selectivity (17.5 and 30.5 for Pebax® 1657 and Renew®, respectively) and hence the CO2/N2 separation selectivity of the membrane (36 and 37 for Pebax® 1657 and Renew®, respectively, obtained from mixed gas permeation). It is also noticeable that the proportion of the soft phase in the copolymer determines the permeability of CO2. It was found that the codes with a greater soft/hard segment ratio (Pebax® 2533 and 3533) have also a greater permeability value (239 and 220 Barrer for Pebax® 2533 and 3533, respectively, measured by mixed gas permeation). Pebax® Renew® was the polymer with the best separation performance with CO2 permeabilities of 167 and 164 Barrer and CO2/N2 selectivities of 41 and 37, measured by single and mixed gas permeation, respectively. The comparison between the single and mixture gas permeation results revealed a relatively good correspondence between both for most of the Pebax® codes tuned by the solubility and diffusion properties of the polymers. © 2022 The Authors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Highly stable Pebax® Renew® thin-film nanocomposite membranes with metal organic framework ZIF-94 and ionic liquid [Bmim][BF4] for CO2 capture

  • Martínez-Izquierdo, Lidia
  • Téllez, Carlos
  • Coronas, Joaquín
Ionic liquid [Bmim][BF4] and metal organic framework ZIF-8 and ZIF-94 nanoparticles were incorporated into polymer Pebax® Renew® 30R51 to obtain highly efficient thin-film nanocomposite membranes, ca. 300 nm thick.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimization of MIL-178(Fe) and Pebax® 3533 loading in mixed matrix membranes for CO2 capture

  • Hasan, Md R.
  • Zhao, H.
  • Steunou, N.
  • Serre, C.
  • Malankowska, M.
  • Téllez, C.
  • Coronas, J.
Global warming is considered as a consequence of extensive use of fossil fuels. Post combustion CO2 capture is an interesting and alternative solution where mixed matrix membranes (MMMs) can be an exciting candidate. This research focuses on the optimization of MMM composition consisting of Pebax® 3533 as the polymer matrix and porous coordination polymer (PCP) MIL-178(Fe) as a filler for gas separation application. MIL-178(Fe) characterized with SEM, TEM and TGA were applied to compare bare polymer and MMM. Optimum composition of the MMM obtained was 5 wt.% MIL-178(Fe) in Pebax® 3533. Average thickness of the optimized dense MMM was 116 ± 8 µm. Such MMM showed CO2 permeability and CO2/N2 selectivity of 312 ± 5 Barrer and 25.0 ± 0.5, respectively, 12% and 25% improved regarding the bare membrane. Additionally, optimum MMM was applied for CO2/CH4 separation and successfully compared in terms of improved CO2 permeability and CO2/CH4 selectivity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Double-Layered Pebax® 3533/ZIF-8 Membranes with Single-Walled Carbon Nanotube Buckypapers as Support for Gas Separation

  • Berned-Samatán, Víctor
  • Téllez, Carlos
  • Coronas, Joaquín
Single-walled carbon nanotube buckypapers (SWCNT-bps) coated with a metal–organic framework ZIF-8 layer were used as supports for the preparation of Pebax® 3533 TFC membranes by both phase inversion and spin coating techniques. Upon proper characterization of the materials by X-ray diffraction, IR spectroscopy, thermogravimetry and electron microscopy, the obtained membranes were tested in gas separation experiments with a 15:85 CO2/N2 mixture. These experiments proved that the ZIF-8 layer prevented from the penetration of the polymer selective film into the SWCNT-bp support, giving rise to a highly permeable selective membrane. The optimum membrane was achieved by the spin-coating method, with better permeation results than that prepared by the phase inversion method, obtaining a CO2 permeance of 566 GPU together with a CO2/N2 selectivity of 20.9.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanofiltration with polyamide thin film composite membrane with ZIF-93/SWCNT intermediate layers on polyimide support

  • Berned-Samatán, Victor
  • Piantek, Marten
  • Coronas, Joaquín
  • Téllez, Carlos
Among current separation processes, nanofiltration (NF), besides its easy scalability, exhibits low energy consumption, environmental impact and footprint, being widely used for water treatment and solvent recovery. The development of membranes for NF involves perfecting the skin selective layer, the sublayers and the support. In this work, a multilayer structure membrane is presented where a selective layer of polyamide (PA, thickness 40–60 nm) was interfacially polymerized on a sub-layer of MOF ZIF-93 (thickness ∼ 50 nm) grown on another sub-layer of single-walled carbon nanotubes (SWCNT, thickness ∼ 400 nm) vacuum filtrated on an asymmetric polyimide P84® support (thickness ∼ 200 μm). The membrane with structure PA/ZIF-93/SWCNT/P84 showed excellent results in water NF and methanol organic solvent NF of different dyes (with the highest values of water and methanol permeances of up to 57.6 and 84.5 L·m−2·h−1·bar−1, respectively, with rejections usually greater than 99%). By means of a wide range of characterization techniques (contact angle, AFM, XRD, ATR-FTIR and FIB-SEM) the role of every component in the membrane was elucidated. In fact, the presence of the sublayer of ZIF-93 increased the roughness and hydrophilicity as well as decreased the thickness of the PA layer. These effects are related to the fact that the sublayers subordinate the interfacial polymerization as well as influence the properties of the PA film and therefore its NF performance, even showing chlorine resistance as well as ten-day cross-flow NF stability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fast synthesis of zeolitic imidazolate framework ZIF-94 using NaOH and recycling reagents

  • Paseta, Lorena
  • Malankowska, Magdalena
  • Téllez, Carlos
  • Coronas, Joaquín
ZIF-94 is a zeolitic imidazolate framework with the same SOD type topology than ZIF-8 but with an aldehyde group functionalized organic ligand. This turns ZIF-94 less thermally stable than ZIF-8 but with interesting properties of water and carbon dioxide adsorption, making the former a material highly suitable for carbon capture technologies. In this work, an alternative procedure for the synthesis of ZIF-94 was developed based on the use of NaOH as deprotonator. Besides, the crystallization was carried out in a very short time (1–20 min) at room temperature while centrifuging at 10,000 rpm. This made possible the simultaneous crystallization and separation of the product material giving rise, together with the use of the inorganic deprotonator, to a very efficient process with crystallization yields higher than 65%. For the best conditions tested (crystallization-centrifugation time of 5 min), 66 ± 24 nm in particle size, highly crystalline ZIF-94 with 485 m2 g−1 of specific surface area was obtained at a crystallization yield of 66.9%. Similar properties were obtained for ZIF-94 when prepared from recycled reagents (solvent, ligand and Zn salt).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Green and fast strategies for energy-efficient preparation of the covalent organic framework TpPa-1

  • Martínez-Visus, Íñigo
  • Ulcuango, Matías
  • Zornoza, Beatriz
  • Coronas, Joaquín
  • Téllez, Carlos
Three synthesis procedures for the covalent-organic framework (COF) TpPa-1 are studied with the purpose of setting up the most promising one in a fast and green way, leading to a more environmentally friendly and sustainable process. With conventional heating, good crystallinity and a high BET specific surface area (SSA) of up to 1007 m2 ⋅ g−1 are achieved at 170 °C for 3 days using water as the quintessential green solvent. However, the application of microwave radiation in the synthesis for this crystalline porous polymer allows reaction times to be shortened to 30 min while maintaining structural and textural properties (BET SSA of 928 m2 ⋅ g−1) and obtaining yields close to 98 % (vs. 90 % in the hydrothermal synthesis). The water-assisted mechanochemical synthesis is also an environmentally friendly synthetic approach; with heating at 170 °C in a two-step process (10+10 min), high crystallinity is achieved, a BET SSA of 960  m2 ⋅ g−1 and a yield of 98 % for TpPa-1.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Microfluidic preparation of thin film composite hollow fiber membrane modules for water nanofiltration: Up-scaling, reproducibility and MOF based layers

  • Esteras-Saz, Javier
  • Paseta, Lorena
  • Echaide-Górriz, Carlos
  • Malankowska, Magdalena
  • Luque-Alled, José M.
  • Zornoza, Beatriz
  • Téllez, Carlos
  • Coronas, Joaquín
Background The commercialization of thin film composite (TFC) hollow fiber (HF) membranes remains challenging owing to issues associated with membrane manufacturing. Methods TFC membranes were synthesized by microfluidic interfacial polymerization of polyamide (PA) on polysulfone hollow fiber (HF) membrane modules. A total of 33 HF membrane modules were prepared with different number of HFs (from 1 to 25) and different lengths (from 10 to 50 cm). They were evaluated in a nanofiltration operation in terms of water permeance and rose Bengal (RB) and MgSO4 rejections. Significant findings Among the 33 modules, 73% showed RB rejections higher than 95%, while 36% of the modules reached rejections above 99%. During the membrane synthesis, different parameters, such as PA monomer concentration, residence time and reaction time, were studied. As a result, the amount of monomer was reduced by ca. 80%. The versatility of microfluidics allowed incorporating hydrophilic metal-organic framework (MOF) ZIF-93 to produce HF modules with PA/MOF bilayered membranes (a continuous layer of MOF between the support and the PA film) which led to an important enhancement of the water permeance from 1.3 (bare PA membrane) to 5.3 L·m−2·h−1·bar−1 (PA/ZIF-93 HF membrane), maintaining RB rejection above 95%.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Organic solvent-free fabrication of thin film polyamide/zeolitic imidazolate framework membranes for removal of dyes from water

  • Luque-Alled, José Miguel
  • Martínez-Izquierdo, Lidia
  • Gorgojo, Patricia
  • Téllez, Carlos
  • Coronas, Joaquín
Thin film composite (TFC) polyamide (PA) membranes in combination with zeolitic imidazolate frameworks (ZIF), such as ZIF-8 and ZIF-93, have been fabricated using a novel approach based on vapor phase interfacial polymerization (VIP). These membranes have been investigated for nanofiltration (NF) of aqueous solutions of organic dyes, such as Rose Bengal (RB, 1017 Da), Sunset Yellow (SY, 452 Da) and Acridine Orange (AO, 265 Da). The preparation of the PA layer by VIP technique avoids the use of any organic solvent that is typically required in the conventional PA synthesis. Both ZIF-8 and ZIF-93 were initially synthesized using conventional procedures (methanol-based route) and incorporated to the PA layer in two different configurations: i) thin film nanocomposite with ZIF embedded within the PA film, and ii) bilayer membranes with a layer of ZIF between the support and the PA layer. The synthesis of ZIF-93 using a water-based route was developed for the bilayer configuration allowing for an organic solvent-free fabrication of PA/ZIF-93 bilayer VIP-TFC. These membranes showed the highest water permeances of 2.6, 3.4 and 2.2 L m-2h−1 bar−1 for RB, SY and AO, respectively. As compared to the control membrane VIP-TFC, this represents permeance increases of 69–117% and maintains high (greater than 99%) rejection of all the organic dyes. Membrane characterization demonstrated that the permeance enhancement for bilayer PA/ZIF-93 VIP-TFCs is related to an improved hydrophilicity, higher surface roughness and thinner selective layers. The prepared membranes demonstrated excellent cycle stability, maintaining their initial water permeance and dye rejection throughout 34 h of long-term operation, and being able to operate across the entire pH range studied (pH 3 to 9) without any detrimental effects on performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Poly(ether-block-amide) copolymer membranes in CO2 separation applications

  • Embaye, Alula Selomon
  • Martinez-Izquierdo, Lidia
  • Malankowska, Magdalena
  • Tellez, Carlos
  • Coronas, Joaqui´n
Poly(ether-block-amide) (PEBA, commercialized as Pebax) copolymer membranes show a highly promising platform for preparing high-performance membranes for CO2 capture from process streams containing CH4 and N2. Pebax combines high CO2 affinity with the desired mechanical strength for polymeric membranes thanks to its flexible polyether segment and hard polyamide block, respectively. Furthermore, researchers have been improving the performance of these membranes by preparing a thin Pebax selective layer on top of porous supports and by incorporating inorganic and organic nanofillers into the Pebax matrix to overcome the permeance-selectivity limit. The chemical and structural characteristics of Pebax membranes according to the different fabrication techniques and parameters are discussed first. Then, the recent developments in terms of both Pebax-based thin film composite and mixed matrix membranes are summarized. Finally, thermal and water stabilities of these membranes are addressed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Sustainable ß- and ¿-cyclodextrins for development of highly permeable thin film composite nanofiltration membranes

  • Pina-Vidal, Cristina
  • Luque-Alled, Jose Miguel
  • Coronas, Joaquín
  • Téllez, Carlos
The use of macromolecules, such as cyclodextrins (CDs), given their porosity and compatibility with organic materials, are very attractive for the progress of polymeric membranes in nanofiltration (NF) of aqueous dye solutions. Two types of membranes were fabricated. Firstly, β- and γ-CDs were incorporated to polyamide (PA) thin film composite (TFC) membranes. These membranes, named CD/MPD-TMC, were prepared by conventional interfacial polymerization —i.e., an aqueous solution of m-phenylenediamine (MPD) followed by a solution of trimesoyl chloride (TMC) in hexane— by replacing a certain amount of the MPD monomer with varying proportions of CDs. Secondly, two-step double-IP (TD-IP) membranes were fabricated as follows: CDs were deposited atop the polymer support, followed by addition of TMC —forming a polyester (PE) layer—, and subsequently the membrane surface was modified with MPD molecules. In both CD/MPD-TMC and TD-IP membranes, the presence of CDs improved the membrane performance, the latter configuration leading to much higher water permeances. The TD-IP membrane using β-CD achieved the highest water permeance of 10 L m−2 h−1·bar−1 (LMH bar−1) and a rejection of acridine orange dye (265 Da) greater than 98 %. This represents a 6-fold increase in water permeance compared to bare PA (1.6 LMH bar−1). The enhanced water transport was mainly attributed to the more hydrophilic nature of the membranes and the presence of a PE layer with a porous structure and high pore connectivity. High dye rejection resulted from electrostatic and Donnan repulsions due to surface modification with MPD molecules.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ultrasmall Functionalized UiO-66 Nanoparticle/Polymer Pebax 1657 Thin-Film Nanocomposite Membranes for Optimal CO2 Separation

  • Martínez-Izquierdo, Lidia
  • García-Comas, Cristina
  • Dai, Shan
  • Navarro, Marta
  • Tissot, Antoine
  • Serre, Christian
  • Téllez, Carlos
  • Coronas, Joaquín
Ultrasmall 4 to 6 nm nanoparticles of the metal–organic framework (MOF) UiO-66 (University of Oslo-66) were successfully prepared and embedded into the polymer Pebax 1657 to fabricate thin-film nanocomposite (TFN) membranes for CO2/N2 and CO2/CH4 separations. Furthermore, it has been demonstrated that ligand functionalization with amino (−NH2) and nitro (−NO2) groups significantly enhances the gas separation performance of the membranes. For CO2/N2 separation, 7.5 wt % UiO-66-NH2 nanoparticles provided a 53% improvement in CO2 permeance over the pristine membrane (from 181 to 277 GPU). Regarding the CO2/N2 selectivity, the membranes prepared with 5 wt % UiO-66-NO2 nanoparticles provided an increment of 17% over the membrane without the MOF (from 43.5 to 51.0). However, the CO2 permeance of this membrane dropped to 155 GPU. The addition of 10 wt % ZIF-94 particles with an average particle size of ∼45 nm into the 5 wt % UiO-66-NO2 membrane allowed to increase the CO2 permeance to 192 GPU while maintaining the CO2/N2 selectivity at ca. 51 due to the synergistic interaction between the MOFs and the polymer matrix provided by the hydrophilic nature of ZIF-94. In the case of CO2/CH4 separation, the 7.5 wt % UiO-66-NH2 membrane exhibited the best performance with an increase of the CO2 permeance from 201 to 245 GPU.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Microwave-assisted synthesis of metal–organic frameworks UiO-66 and MOF-808 for enhanced CO2/CH4 separation in PIM-1 mixed matrix membranes

  • Yahia, Mohamed
  • Lozano, Luis A.
  • Zamaro, Juan M.
  • Téllez, Carlos
  • Coronas, Joaquín
This study presents a sustainable microwave-assisted synthesis, based on the use of acetone and a water/acetic acid mixture instead of typical harmful DMF, to fabricate Zr-metal–organic frameworks (MOFs) UiO-66 and MOF-808 as fillers in a PIM-1 matrix for gas separation application. The mixed matrix membranes (MMMs) were prepared with varying loadings (2.5–10 wt%) of MOFs. The physicochemical properties (1H NMR, FTIR, XRD, N2 adsorption, TGA and SEM) of the resulting PIM-1, MOFs and MMMs were analyzed. The CO2/CH4 separation performance and membrane aging characteristics of the MMMs were evaluated. The incorporation of MOF fillers significantly improved CO2 permeability and CO2/CH4 selectivity, attributed to their CO2-philicity and narrow pore size (UiO-66 ≈ 0.6 nm and MOF-808 ≈ 1.8 nm). The MMMs with higher filler loadings (7.5 and 10 wt%) exhibited the most favorable separation performance. Due to the better crystallinity and textural properties, MOF-808 produced the best separation results at 10 wt% filler loading (a CO2/CH4 separation selectivity of 16.2 at 9090 Barrer of CO2 permeability). Aging led to a decrease in CO2 permeability but a slight increase in CO2/CH4 selectivity for all MMMs. Overall, the study highlights the potential of PIM-1/UiO-66 and PIM-1/MOF-808 MMMs as efficient materials for (CO2/CH4) separation comparing with the pristine PIM-1.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Highly permeable ZIF-8 membranes for C2H4/C2H6 separation in a wide temperature range

  • Pérez Miana, Marta
  • Coronas, Joaquín
  • Hedlund, Jonas
  • Yu, Liang
Ethylene/ethane separation is a critical and energy-consuming process in the chemical industry due to the similar properties of the compounds and the great need of ethylene for e.g., polymer production. Many materials have been studied for their implementation as membranes as an energetically favorable alternative to conventional distillation and adsorption processes. Metal-organic frameworks (MOF) have revealed promising properties as highly permeable and selective membranes. Among the most studied and promising MOF candidates is ZIF-8, known for its thermal stability and small pores connected by narrow-sized windows. In this work, we present an analysis of the influence of parameters such as temperature, feed pressure and feed flowrate on the separation of ethylene/ethane through a thin ZIF-8/alumina disc membrane. We observed that the temperature has a significant effect on the separation. The ethylene permeance increased with decreased temperature and reached 8.1 × 10−7 mol/(m2·s·Pa) at −30 °C. At this temperature, the ethylene/ethane selectivity was 2.5. The study concluded with a considerable enhancement of the permeance of ZIF-8 membranes for ethylene/ethane separations, while maintaining a good selectivity compared to the reported values in the literature. The results have important implications for the development of more cost-effective and energy-efficient membrane-based separation technologies for ethylene purification.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Temporal negotiations and injustices in the energy transition: Perspectives from a Spanish coal region

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

ZIF-8 modified with 2-undecylimidazolate as filler for mixed matrix membranes for CO<sub>2</sub> separation

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Yahia, Mohamed
  • Mayoral, Álvaro
  • Coronas, Joaquín
A novel modification of zeolitic imidazolate framework-8 (ZIF-8) with 2-undecylimidazolate (umIm) was explored to enhance its hydrophobic character and improve its compatibility with polymer of intrinsic microporosity PIM-1 when incorporated as a filler in mixed matrix membranes (MMMs). In addition to the study of the best conditions to exchange the structural ligand of ZIF-8 by umIm and the characterization (by FTIR, RMN, XRD, TGA, N2 adsorption and TEM) of the obtained material, comparative analyses were conducted using MMMs containing the original ZIF-8 and the modified version. Different loadings were applied to study the impact on gas separation properties. Remarkably, the MMM with the modified ZIF-8 demonstrated superior performance surpassing the Robeson upper bound line of 2008 and revealing the effectiveness of this MOF modification strategy. In fact, with the 10 wt% ZIF-8-umIm loading MMM, the highest value of CO2/N2 selectivity was 15.4 (12% higher than that of bare PIM-1) at a CO2 permeability of 16 667 Barrer (52% higher than that of bare PIM-1). These findings highlight the promising potential of the ZIF-8 modification with umIm as a valuable filler material for MMMs in gas separation applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhancing CO2/CH4 separation performance in PIM-1 based MXene nanosheets mixed matrix membranes

  • Yahia, Mohamed
  • Refaat, Dalia
  • Coronas, Joaquín
  • Téllez, Carlos
This study presents an approach by integrating MXene nanosheets (Ti2C3Tx) into polymer of intrinsic microporosity (PIM-1) matrix to develop mixed matrix membranes (MMMs) for biogas upgrading. Different concentrations (1–5 wt%) of MXene were incorporated into PIM-1, and the resulting materials were characterized to 1H NMR, FTIR, XRD, TGA, nitrogen adsorption, SEM and EDS to assess their physicochemical properties. The research focused on evaluating the gas separation performance, particularly CO2/CH4 separation, as well as the aging behavior of the MMMs. The incorporating of MXene nanosheets significantly enhanced the CO2 permeability and selectivity of PIM-1 by enhancing gas solubility and diffusivity. The most promising results were observed at 5 wt% filler loading, achieving a 13.5 CO2/CH4 separation selectivity at 7652 Barrer of CO2 permeability. In all membranes with aging time (60 days), there was a decrease in CO2 permeability and a slight increase in CO2/CH4 selectivity, observing that the introduction of MXene slightly mitigates the physical aging process in the PIM-1 polymer. Additionally, the permeability tests revealed higher CO2 permeability and (CO2/CH4) selectivity values for mixed gases compared to single gases. Overall, the study highlights the potential of MXene/PIM-1 MMMs as effective materials for CO2/CH4 separation, outperforming pristine PIM-1.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Vapor phase interfacial polymerization: a method to synthesize thin film composite membranes without using organic solvents

  • Paseta, L.
  • Echaide-Górriz, C.
  • Téllez, C.
  • Coronas, J.
Thin film composite membranes (TFC) of polyamide (PA) prepared by interfacial polymerization (IP) between a diamine and an acyl chloride are applied to industrial nanofiltration and reverse osmosis. Water, to dissolve the diamine, and n-hexane, to dissolve the acyl chloride, solvents are involved in the IP process. Eliminating the use ofn-hexane would be crucial to produce a greener TFC membrane synthesis method. This is achieved here by carrying out an interfacial polymerization from the vapor phase. First, the membrane support was impregnated with the aqueous diamine solution. Second, the support with the diamine was contacted with vapors of the acyl chloride to unchain the IP reaction. Besides the absence ofn-hexane, acyl chloride was applied more efficiently avoiding its loss during the cleaning operations carried out in the typical IP process. These membranes were applied in the nanofiltration of simulated micropollutants in water (rose Bengal, sunset yellow and acridine orange dyes), with higher water permeance (up to 3.3 L·m-2·h-1·bar-1) than that of conventional TFC membranes and dye rejections higher than 94% in all cases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Single-walled carbon nanotube buckypaper as support for highly permeable double layer polyamide/zeolitic imidazolate framework in nanofiltration processes

  • Berned-Samatán, V.
  • Rubio, C.
  • Galán-González, A.
  • Muñoz, E.
  • Benito, A. M.
  • Maser, W. K.
  • Coronas, J.
  • Téllez, C.
The development of membranes for nanofiltration applications requires not only selective layers but also suitable supports to control their synthesis as well as to enable efficient and competitive membrane performances. Single-walled carbon nanotube free-standing films (denoted as buckypaper) have been used as supports for the preparation of polyamide (PA) layers by interfacial polymerization (IP) and tested for dead-end nanofiltration for dyes removal (265–1017 Da) from water and organic solvents. The arrangement of the phases during the IP is essential, thus impregnation on the buckypaper support, first with the organic phase and then with the aqueous phase (denoted as inverse IP, iIP) leads to permeances (of up to 28.0 and 31.4 L m-2 h-1 bar-1 for water and methanol, respectively) and rejection values (>96%) that exceed those of the membranes prepared by reversing the impregnation order. Secondly, a double layer PA/zeolitic imidazolate framework (ZIF-8 or ZIF-93) was prepared on the buckypaper (bp). The design of this double layer led to superior membrane performance, in particular for the hydrophilic ZIF-93, as it changes the PA layer properties (increasing both hydrophilicity and surface roughness) providing higher permeances (up to 59.3 and 76.0 L m-2 h-1 bar-1 for water and methanol, respectively) and dye rejections (>98.5%) than the bare PA layer prepared by iIP. This attractive performance of the PA/ZIF-93/bp membrane has been corroborated with experiments in cross-flow nanofiltration and dead-end nanofiltration of aqueous salt solutions, long-term stability nanofiltration and the study the membrane separation performance after a chlorine treatment. The results reported here therefore show the enormous potential of these membrane architectures for a variety of selective separation processes. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of the delamination of zeolitic imidazolate framework ZIF-7-III on the conversion of sucrose into methyl lactate

  • Navarro, Marta
  • Iglesia, Óscar de la
  • Téllez, Carlos
  • Coronas, Joaquín
The catalytic conversion of sugars to methyl lactate has been in the spotlight of the scientific community in the last decades. In this context, delaminated materials can provide better catalytic performances than their precursors, since they have a better accessibility to their active sites. In order to improve the yield to methyl lactate (ML), new delaminated material ZIF-7-III_EX was synthesized from the exfoliation of the dense Zn-based zeolitic imidazolate framework ZIF-7-III. Different techniques, namely XRD, SEM, TEM, thermogravimetric analysis and CO2 adsorption, were carried out to characterize the obtained materials as well as to verify the exfoliation of the precursor. Regarding the catalytic results, as-synthesized ZIF-7 showed a promising yield to ML, 41.2 %, superior to that achieved by ZIF-9 (based on Co instead of Zn). In addition, the delaminated material ZIF-7-III_EX reached a ML yield of 69.1 %, which implies 67.7 % and 97.4 % of improvements with respect to ZIF-7 and to ZIF-7-III, respectively. The reuse of some selected catalyst materials derived from ZIF-7-III was also studied.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Pre-combustion gas separation by ZIF-8-polybenzimidazole mixed matrix membranes in the form of hollow fibres - Long-term experimental study

  • Perea-Cachero A.
  • Etxeberría-Benavides M.
  • David O.
  • Deacon A.
  • Johnson T.
  • Malankowska M.
  • Téllez C.
  • Coronas J.
Polybenzimidazole (PBI) is a promising and suitable membrane polymer for the separation of the H 2 /CO 2 pre-combustion gas mixture due to its high performance in terms of chemical and thermal stability and intrinsic H 2 /CO 2 selectivity. However, there is a lack of long-term separation studies with this polymer, particularly when it is conformed as hollow fibre membrane. This work reports the continuous measurement of the H 2 /CO 2 separation properties of PBI hollow fibres, prepared as mixed matrix membranes with metal-organic framework (MOF) ZIF-8 as filler. To enhance the scope of the experimental approach, ZIF-8 was synthesized from the transformation of ZIF-L upon up-scaling the MOF synthesis into a 1 kg batch. The effects of membrane healing with poly(dimethylsiloxane), to avoid cracks and non-selective gaps, and operation conditions (use of sweep gas or not) were also examined at 200°C during approximately 51 days. In these conditions, for all the membrane samples studied, the H 2 permeance was in the 22-47 GPU range corresponding to 22-32 H 2 /CO 2 selectivity values. Finally, this work continues our previous report on this type of application (Etxeberria-Benavides et al. 2020 Sep. Purif. Technol. 237, 116347 (doi:10.1016/j.seppur.2019.116347)) with important novelties dealing with the use of ZIF-8 for the mixed matrix membrane coming from a green methodology, the long-term gas separation testing for more than 50 days and the study on the membrane operation under more realistic conditions (e.g. without the use of sweep gas).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Phase inversion method for the preparation of Pebax® 3533 thin film membranes for CO2/N2separation

  • Martínez-Izquierdo L.
  • Malankowska M.
  • Téllez C.
  • Coronas J.
Thin film composite membranes of poly(ether-block-amide) copolymer Pebax® 3533 were prepared for the first time on asymmetric polysulfone supports by a phase inversion method. The casting solution concentration and the number of layers were varied to study their influence on the selective layer thickness and the gas separation performance. The casting solution concentrations of polymer dissolved in the 1-propanol/1-butanol mixture were 0.25, 0.5, 1.0 and 1.5 wt%. These conditions produced membranes with selective skin layers with thicknesses from 0.2 to 1.8 µm. All the membranes were characterized by scanning electron microscopy, thermogravimetric analysis and infrared spectroscopy. Furthermore, the intrinsic viscosity of all the casting solutions was studied to understand the effect of the polymer concentration on the homogeneity and the gas separation properties of the obtained membranes. In general, lower viscosity of casting solutions rendered to more defective skin layers, resulting in a higher number of layers required to obtain selective membranes. The gas separation performance was tested for the post-combustion 15/85 CO2/N2 mixture at 25-50 °C and under a feed pressure of 3 bar. The best separation performance was achieved with the 0.5 wt% casting solution membranes after the deposition of four polymer layers, obtaining a CO2 permeance of 127 GPU and a CO2/N2 selectivity of 21.4 at 35 °C, the same selectivity of the corresponding dense membrane but with much higher permeance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Study for CO2 separation with poly(ethylene oxide terephthalate)-poly(butylene terephthalate) multiblock copolymer membranes: Approaching a greener solvent preparation

  • Martínez-Visus, Íñigo
  • Téllez, Carlos
  • Coronas, Joaquín
Green solvent alternatives for the multiblock copolymer PolyActive™ were selected to test their effectiveness in membrane fabrication for gas separation. Solubility tests were conducted to assess the solvent-polymer compatibility, followed by membrane fabrication using a drop casting-solution method. Ethyl lactate was identified as a potential greener solvent, compared to more commonly used solvents like chloroform and tetrahydrofuran, as it maintained the membrane conformation, thermal and chemical stability, and thermal degradation characteristics as demonstrated by membrane characterization using SEM, FTIR, TGA and DSC. Single gas transport parameters (permeability, diffusivity and solubility) for N2, H2, CH4, He and CO2 were obtained via the time-lag method for the prepared membranes. A temperature dependence study was conducted in the 25–70 °C range, calculating activation energies for gas transport properties and ideal selectivities. Mixed gas measurements were also performed, comparing separation selectivities to those (ideal selectivities) obtained in single gas, indicating a potential competitive adsorption effect between less permeable species, leading to more selective separation in gas mixture. Membranes prepared with different polymer concentrations (1, 2 and 5 wt%) in ethyl lactate achieve a CO2/N2 ideal selectivity of up to 50.4 at a CO2 permeability of 179 Barrer. This enhanced performance was attributed to ethyl lactate higher boiling point, resulting in a more densely packed polymer structure as reflected by the higher crystallinity and lower fractional free volume measured through XRD, DSC and pycnometry analyses.