Skip to main content

PRODUCCION ELECTROQUIMICA DE HIDROGENO MEDIANTE INTERFACES OPTIMIZADAS BASADAS EN GRAFENO. PHOTOGRAPH

PID2019-104272RB-C51

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 75
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Surface-Enriched Boron-Doped TiO2 Nanoparticles as Photocatalysts for Propene Oxidation

  • Cano-Casanova, Laura
  • Ansón Casaos, Alejandro
  • Hernández Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Garro, Núria
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Cano-Casanova, Laura|||/items/44342f34-c8a2-4069-8bb6-cba47b9cb532
A series of nanostructured boron-TiO2 photocatalysts (B-X-TiO2-T) were prepared by sol–gel synthesis using titanium tetraisopropoxide and boric acid. The effects of the synthesis variables, boric acid amount (X) and crystallization temperature (T), on structural and electronic properties and on the photocatalytic performance for propene oxidation, are studied. This reaction accounts for the remediation of pollution caused by volatile organic compounds, and it is carried out at low concentrations, a case in which efficient removal techniques are difficult and costly to implement. The presence of boric acid during the TiO2 synthesis hinders the development of rutile without affecting the textural properties. X-ray photoelectron spectroscopy analysis reveals the interstitial incorporation of boron into the surface lattice of the TiO2 nanostructure, while segregation of B2O3 occurs in samples with high boron loading, also confirmed by X-ray diffraction. The best-performing photocatalysts are those with the lowest boron loading. Their high activity, outperforming the equivalent sample without boron, can be attributed to a high anatase and surface hydroxyl group content and efficient photo-charge separation (photoelectrochemical characterization, PEC), which can explain the suppression of visible photoluminescence (PL). Crystallization at 450 °C renders the most active sample, likely due to the development of a pure anatase structure with a large surface boron enrichment. A shift in the wavelength-dependent activity profile (PEC data) and the lowest electron–hole recombination rate (PL data) are also observed for this sample.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical properties and carrier dynamics in Co-doped ZnO nanorods

  • Sivan, Aswathi K.
  • Galán, Alejandro
  • Di Mario, Lorenzo
  • Tappy, Nicolas
  • Hernández-Ferrer, Javier
  • Catone, Daniele
  • Turchini, Stefano
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Escobar Steinvall, Simon
  • Fontcuberta i Morral, Anna
  • Gallant, Andrew
  • Zeze, Dagou A.
  • Atkinson, Del
  • Martelli, Faustino
8 figures.-- Supplementary information available., The controlled modification of the electronic properties of ZnO nanorods via transition metal doping is reported. A series of ZnO nanorods were synthesized by chemical bath growth with varying Co content from 0 to 20 atomic % in the growth solution. Optoelectronic behavior was probed using cathodoluminescence, time-resolved luminescence, transient absorbance spectroscopy, and the incident photon-to-current conversion efficiency (IPCE). Analysis indicates the crucial role of surface defects in determining the electronic behavior. Significantly, Co-doping extends the light absorption of the nanorods into the visible region, increases the surface defects, shortens the non-radiative lifetimes, while leaving the radiative lifetime constant. Furthermore, for 1 atomic % Co-doping the IPCE of the ZnO nanorods is enhanced. These results demonstrate that doping can controllably tune the functional electronic properties of ZnO nanorods for applications., WKM, AMB acknowledge Spanish MINEICO (ENE2016-79282-C5-1-R (AEI/FEDER, UE)), MICINN (PID2019-104272RB-C51/AEI/10.13039/501100011033), CSIC (2019AEP010) and Gobierno de Aragón (Grupo Reconocido DGA T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Detailed thermal reduction analyses of graphene oxide via in-situ TEM/EELS studies

  • Peláez-Fernández, Mario
  • Bermejo-Solís, Alba
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
7 figures.-- Supplementary material available.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, We report an in-depth study of the reduction of graphene oxide (GO) by in-situ thermal transmission electron microscopy (TEM) analysis. In-situ heating high-resolution TEM (HRTEM) imaging and electron energy-loss spectroscopy (EELS) measurements have been combined to identify the transformations of different oxygen functional groups, the desorption of physisorbed and chemisorbed water and the graphitisation as a function of the temperature in the range from 70 up to 1200 °C. A model for the general removal of water and OFGs is proposed based on different chemical and physical parameters that have been monitored. All this unique information provides a detailed roadmap of the thermal behaviour of GO at an extended range of temperature. This is not only of interest to understand the thermal reduction process of GO but also of critical relevance to the response of GO in applications when exposed to thermal effects., Research supported by the Spanish MINECO and MICINN (MAT2016-79776-P, AEI/FEDER, EU; PID2019-104739GB-100/AEI/10.13039/501100011033; and PID2019-104272RB-C51/AEI/10.13039/501100011033), Gobierno de Aragon (DGA Grupos Reconocidos E13_17R (FEDER, EU) and T03_20R) and European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC-PCI2018-093137), EU H2020 Enabling Excellence (MSCA-ITN) and Graphene Flagship (881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ reduction by Joule heating and measurement of electrical conductivity of graphene oxide in a transmission electron microscope

  • Hettler, Simon
  • Sebastián del Río, David
  • Peláez-Fernández, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
4 figures.-- Supporting information available on the website of the publisher., Graphene oxide (GO) is reduced by Joule heating using in-situ transmission electron microscopy (TEM). The approach allows the simultaneous study of GO conductivity by electrical measurements and of its composition and structural properties throughout the reduction process by TEM, electron diffraction and electron energy-loss spectroscopy. The small changes of GO properties observed at low applied electric currents are attributed to the promotion of diffusion processes. The actual reduction process starts from an applied power density of about 2 × 1014 Wm−3 and occurs in a highly uniform and localized manner. The conductivity increases more than 4 orders of magnitude reaching a value of 3 × 103 Sm−1 with a final O content of less than 1%. We discuss differences between the reduction by thermal annealing and Joule heating., S.H. and R.A. acknowledge funding by German Research Foundation (DFG project He 7675/1-1). Research supported by the Spanish MINECO and MICINN (MAT2016-79776-P,AEI/FEDER, EU; PID2019-104739GB-100/AEI/10.13039/501100011033; ENE2016-79282-C5-1-R, AEI/FEDER, EU and PID2019-104272RB-C51/AEI/10.13039/501100011033), Government of Aragon (projects DGA E13-17R (FEDER, EU); DGA T03-17R (FEDER, EU) and DGA T03-20R) and European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC - PCI2018-093137), ITN Enabling Excellence (MSCA-ITN) and Graphene Flagship (881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3D structures

  • González Domínguez, José Miguel
  • Baigorri, Alejandro
  • Álvarez Sánchez, Miguel Ángel
  • Colom, E.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
11 figures, 1 table.-- Supplementary information available., In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray- or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures., This research was funded by Spanish MINEICO/MICINN, under project references ENE2016-79282-C5-1-R (AEI/UE/FEDER) and PID2019-104272RB-C51/AEI/10.13039/501100011033, and the Gobierno de Aragón (Grupo Reconocido DGA-T03_20R). J.M.G.-D. greatly acknowledges Spanish MINEICO for his ‘Juan de la Cierva Incorporation’ contract and associated research funds (ref. IJCI-2016-27789). The APC predoctoral contracts of E.C. and M.Á.Á.-S. were funded by the Spanish MINEICO (BES2017-080020, including EU Social Funds) and the Gobierno de Aragón, respectively. The work performed at the University of Zaragoza was funded by the MICINN (PID2019-104307GB-I00/AEI/10.13039/501100011033) and Gobierno de Aragón (E47_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Nanostructured biopolymers as sustainable dispersants of aqueous carbon nanofibers inks

  • Calvo Peña, Víctor
  • Paleo, A. J.
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
1 figure.-- Work presented at the Metals and Water 2021 Virtual Zaragoza. IV International Congress in Water Soluble Metal Complexes Applications, 24th-25th June 2021., Nanostructured biopolymers (NBs) have enhanced properties with respect to their bulk counterparts, due to their smaller size. The main type of NBs are cellulose nanocrystals (CNCs), which are needle-shaped crystals of cellulose with lengths ranging from 100 to 500 nm and diameters around 10 nm. They may be present in different cellulose allomorphs, among which types I and II are the most common.1 Another example of NBs are chitin nanocrystals (ChNCs), being also of similar size and shape as CNCs.2 On the other hand, carbon nanofibers (CNFs), produced by chemical vapor deposition (CVD), and with structures similar to multiwall carbon nanotubes, exhibit interesting transport properties that make them valuable for electronic applications.3 It is for this latter reason that the objective of this study was to disperse commercial as-received CNFs by using NBs as sustainable surfactants to produce aqueous conductive inks. In a first step, various aqueous colloidal dispersions of CNFs and NBs (CNCs, ChNCs) were prepared using ultrasounds as dispersion inducers. Afterwards, centrifugation was used to separate the non-dispersed CNF agglomerates from the final ink (Figure 1). Finally, and as a proof-of-concept, an optimized CNFs/NBs dispersion (namely, ink) was used to prepare films of controlled thicknesses on glass substrates by spray coating. Here, the relationship between the thickness and the surface resistivity (Rsh) was monitored. The results gathered here aim at contributing to the development of more sustainable conductive inks for the fabrication of electronic wearable devices., Spanish MICINN and AEI (PID2019-104272RB-C51/AEI/10.13039/501100011033), and Gobierno de Aragón (Grupo Reconocido GCNN T03_20R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Stabilization and spraying of aqueous TiO2 dispersions for the development of water splitting photoanodes

  • Martínez-Barón, Carlos
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
Abstract of the poster presented at the Metals and Water 2021 Virtual Zaragoza. IV International Congress in Water Soluble Metal Complexes Applications, 24th-25th June 2021., Hydrogen is considered as one of the best sustainable alternatives to fossil fuels if produced from water using renewable energy sources. In this context, a promising technology of emerging interest is the photoelectrochemical water splitting, which involves the direct use of luminous energy, ideally sunlight. In a photoelectrolysis cell, at least one electrode (most specifically the anode in this work) contains a photocatalyst material. A typical photoanode configuration consist of fluorine tin oxide (FTO) as a conductive substrate, and TiO2 in anatase phase, which is widely known as one of the most robust semiconductors with a high water oxidation activity. The TiO2 layer is often deposited by screen printing, while spray coating would be a scalable alternative. Due to the characteristics of TiO2 nanoparticles, it is not possible to work with dispersions at neutral pH because they tend to aggregate and precipitate. To overcome this problem, we show that the use of ammonia (NH3) and acetic acid (HAc) as stabilizing agents is one of the best strategies that can be followed to prepare such electrodes by spray coating. Subsequently, photoelectrochemical tests have been performed using a three-electrode cell with sodium sulphate (Na2SO4) as electrolyte. The photoactivity of various as prepared electrodes is compared., Spanish MICINN and AEI (PID2019-104272RB-C51/AEI/10.13039/501100011033), and Gobierno de Aragón (Grupo Reconocido GCNN T03_20R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Fabricación de electrodos fotoactivos para la escisión de la molécula de agua a partir de tintas basadas en nanocelulosa

  • Martínez-Barón, Carlos
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
Resumen del póster presentado en la Reunión Bienal de la Sociedad Española de Catálisis - SECAT 2021, celebrada en Valencia, del 18 al 20 de octubre 2021., La fotocatálisis se suele considerar como una de las posibles alternativas para la producción de hidrógeno verde por escisión de la molécula de agua. En este sentido, además de solventar los problemas de eficiencia en la conversión solar a hidrógeno, es necesario fabricar fotocatalizadores con elementos abundantes y mediante procesos sostenibles, que permitan un escalado de los mismos. En esta comunicación, se presenta la preparación de fotoánodos basados en nanopartículas de TiO2 mediante aerografía, utilizando una tinta que únicamente lleva agua como disolvente y celulosa nanocristalina (NCC) como agente estabilizante. En primera instancia, el TiO2 se depositó sobre óxido de estaño fluorado (FTO), siendo este uno de los sustratos más ampliamente estudiados en aplicaciones solares. Sin embargo, y debido a las dificultades que surgen a la hora de sintetizar dicho compuesto, se propone aquí su sustitución por películas de nanotubos de carbono de capa única (SWCNT) depositadas sobre vidrio. Estas películas de carbono presentan una excelente conductividad superficial, estando además basadas en tintas acuosas estabilizadas con NCC, lo cual hace posible su procesado mediante la técnica de espray., [Parte experimental] Las nanopartículas de TiO2 se sintetizaron por un método sol-gel a partir de isopropóxido de titanio [1]. Los SWCNT se compraron a Carbon Solutions Inc., USA (calidad P2-SWNT). La NCC se sintetizó a partir de celulosa microcristalina comercial (Sigma-Aldrich, Ref. 310697) siguiendo un procedimiento recientemente publicado [2]. Los SWCNT se dispersaron en una suspensión acuosa de NCC mediante un protocolo que incluye tratamientos de ultrasonidos y centrifugación. Asimismo, el TiO2 se dispersó en una suspensión de NCC en agua aplicando ultrasonidos. Las tintas de TiO2 y SWCNT se utilizaron para fabricar electrodos fotoactivos mediante pintado por espray automático con una máquina provista de un cabezal de ultrasonidos (Nadetech). Los electrodos constituidos por FTO fueron tratados a 450ºC en aire durante 120 minutos, mientras que aquellos compuestos por películas de SWCNTs se sometieron a la misma temperatura, pero sólo durante 30 minutos. La actividad fotocatalítica de los electrodos frente a la oxidación de agua se evaluó en una celda de 3 electrodos, usando Ag/AgCl como electrodo de referencia, una barra de grafito como contraelectrodo y Na2SO4 0,1M como electrolito. La fotocorriente se midió mediante voltametría cíclica y en experimento potenciostático. Se iluminó con un simulador solar de laboratorio (lámpara de xenón de 150W de LOT-Oriel GmbH) [3, 4]., [Resultados] Los electrodos de TiO2 (NCC)/FTO muestran actividad fotocatalítica en oxidación de agua, tanto en las medidas por voltametría cíclica bajo iluminación, como en los experimentos a potencial constante. En este último caso, dependiendo del espesor de la capa de TiO2, la fotocorriente puede decaer sustancialmente en los 2 primeros minutos de medida, para mantenerse relativamente estable hacia el minuto 5 (aproximadamente 100 μA·cm-2). El electrodo de TiO2 (NCC)/SWCNT(NCC) también presentó actividad fotocatalítica, siendo de menor intensidad (del orden de 10 μA·cm-2) que en el caso del TiO2 (NCC)/FTO. Con todo, el hecho de que se haya observado dicha actividad abre una vía para la optimización de este tipo de fotoelectrodos, que sólo contendrían elementos abundantes no críticos. Además, se utilizan métodos de procesado más sostenibles y respetuosos con el medio ambiente, que pueden basarse en el uso de agua como único disolvente y de técnicas de recubrimiento ventajosas y escalables como la aerografía., Financiación de MICINN y AEI (PID2019-104272RB-C51/AEI/10.13039/501100011033), y Gobierno de Aragón (Grupo Reconocido GCNN T03_20R), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrids of reduced graphene oxide aerogel and CNT for electrochemical O2 reduction

  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
9 figures, 1 table.-- Supplementary material available., Carbon nanotubes (CNTs), graphene aerogels (GAs), and their hybrid (CNT-GA) prepared by hydrothermal treatment were tested in the electrocatalytic oxygen reduction reaction (ORR). The importance of porous structure derived from the combination of mesoporosity coming from CNTs with macroporosity stemming from GAs was evidenced because the hybrid carbon material exhibited synergistic performance in terms of kinetic current and onset potential. Different electrocatalysts were prepared based on these hybrids doped with nitrogen using different precursors and also supporting Fe nanoparticles. N-doped carbon hybrids showed higher electrocatalytic activity than their undoped counterparts. Nevertheless, both doped and undoped materials provided a mixed two and four electron reduction. On the other hand, the addition of a Fe precursor and phenanthroline to the CNT-GA allowed preparing an N-doped hybrid containing Fe nanoparticles which favored the 4-electron oxygen reduction to water, thus being an excellent candidate as a structured cathode in fuel cells., This research was funded by Spanish Ministry MICINN/AI under Projects PID2019-104272RB-C51/AEI/10.13039/501100011033, PID2020-119160RB-C21 and Gobierno de Aragon (Grupo reconocido DGA T03_20R,) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoscale charge density and dynamics in graphene oxide

  • Palacios-Lidón, E.
  • Colchero, J.
  • Ortuño, Miguel
  • Colom, E.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Somoza, Andrés M.
4 figures.-- Supplementary information available., Graphene oxide (GO) is widely used as a component in thin film optoelectronic device structures for practical reasons because its electronic and optical properties can be controlled. Progress critically depends on elucidating the nanoscale electronic structure of GO. However, direct experimental access is challenging because of its disordered and nonconductive character. Here, we quantitatively mapped the nanoscopic charge distribution and charge dynamics of an individual GO sheet by using Kelvin probe force microscopy (KPFM). Charge domains are identified, presenting important charge interactions below distances of 20 nm. Charge dynamics with very long relaxation times of at least several hours and a logarithmic decay of the time correlation function are in excellent agreement with Monte Carlo simulations, revealing an universal hopping transport mechanism best described by Efros–Shklovskii’s law., This research was financed by the Ministerio de Ciencia e Innovación and the Agencia Estatal de Investigación (MICINN/AEI, Spain) and associated Funds of the European Union through the projects “Nano and Meso Scales: Modelling, Structure and Characterization” (PID2019-104272RB-C52/AEI/10.13039/501100011033 and “Photoelectrochemical hydrogen production by optimized graphene-based interfaces” (PID2019-104272RB-C51/AEI/10.13039/501100011033) and the Fundación Séneca through the projects 19907/GERM/15 and 20860/PI/18, as well as the Gobierno de Aragón (Grupo Reconocido DGA-T03_20R)., E.C. acknowledges funding of his predoctoral contract by Spanish MINEICO and associated European Social Funds (BES2017-080020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Venciendo la degradación climática del patrimonio pétreo mediante recubrimiento con nanomateriales basados en carbono

  • González Domínguez, José Miguel
  • Búrdalo, Gabriel
  • Caldevilla, Pablo
  • Calvo Peña, Víctor
  • Fernández, Sagrario
  • González Campelo, D.
  • Martínez, Marta
  • Martínez García, Rebeca
  • Ortiz Marqués, Almudena
  • Palencia, Covadonga
  • Rodríguez Fernández, Carlos
  • Zelli, Flavia
  • Fernández-Raga, María
Resumen de la comunicación oral presentada en el XVII Simposio de Investigadores Jóvenes de la RSEQ, celebrado en la Universidad de Alcalá de Henares, 23-26 noviembre 2021., Cada año se notan más los efectos del cambio climático, que conllevan episodios de lluvia más agresivos y cambios térmicos más acusados. Estos cambios meteorológicos suponen un impacto muy grave, como el daño que pueden generar al patrimonio pétreo, altamente amenazado sobretodo en piedras blandas debido a su susceptibilidad a daños ocasionados por el agua. Las administraciones responsables de la protección del patrimonio tratan de paliar este desgaste con medidas que buscan proteger el bien de interés, pero bajo la máxima de que sean tratamientos que no alteren la apariencia física del mismo y que sean reversibles. Estos tratamientos que se realizan, si bien no son agresivos con el monumento, resultan muy costosos e ineficaces cuando, por causa de la escasez de recursos, no pueden realizarse con la frecuencia requerida (al menos una vez cada 5 años). Y esto conduce a que muchos monumentos esperando el tratamiento van abandonándose a su suerte. Nuestro equipo ya ha logrado encontrar y patentar una posible alternativa de protección basada en óxido de grafeno, de excelentes características: un recubrimiento transparente, más duradero, resistente e inocuo para la piedra. Además, se cumplen los requerimientos específicos de la protección monumental, que es no poner en riesgo el aspecto físico ni la estética del monumento. Además, mediante la actual financiación del MICINN se explorarán otros nanomateriales sostenibles y biodegradables. Esta prometedora idea supondrá que ni la economía, pues es barato y perdura su protección periodos superiores a los 10 años, ni el medio ambiente, pues buscamos recubrimientos que cumplan con los principios de sostenibilidad ambiental, fueran afectadas. Y además este proyecto combina estos trabajos y pruebas con el desarrollo de una herramienta digital SIG que permita evaluar y calcular el mejor tratamiento y su coste para distintos monumentos de un territorio, así como gestionar mejor los limitados recursos de las administraciones que custodian estos monumentos, indicando la fecha y localización de las aplicaciones y la prioridad de actuación bajo criterios objetivos., Overcoming the climatic degradation of the stone-based cultural heritage by shielding with sustainable nanomaterials (NANOSHIELD). Proyecto MICINN Retos PID2020-120439RA-I00.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Puntos de carbono poliméricos. Síntesis y desarrollo de nuevos nanomateriales de carbono fluorescentes y su implicación en la producción de hidrógeno sostenible

  • Álvarez Sánchez, Miguel Ángel
  • Martínez-Barón, Carlos
  • Hernández-Ferrer, Javier
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
Póster presentado en el XVII Simposio de Investigadores Jóvenes de la RSEQ (2021), celebrado en la Universidad de Alcalá de Henares, 23-26 noviembre., Los puntos de carbono poliméricos, pertenecientes a la familia de puntos de carbono (del inglés Carbon Dots), han despertado gran interés en los últimos años por sus excelentes propiedades de fluorescencia, que se puede modificar para que emitan en un rango variado de longitudes de onda. Esto, sumado a su bajo coste de síntesis, gran estabilidad fotoquímica, facilidad de funcionalización, baja toxicidad, elevada biocompatibilidad y solubilidad en agua, los posicionan como una potente alternativa a los puntos cuánticos convencionales, en su mayoría tóxicos por la presencia de metales pesados. Por todo ello, estos materiales resultan muy prometedores para aplicaciones en una gran variedad de campos, como son la biomedicina (diagnóstico, terapia, detección), la fotocatálisis (degradación de contaminantes) y la energía (fotovoltaica) entre otros. Los puntos poliméricos comúnmente emiten en el azul y su mecanismo de fluorescencia ha sido estudiado en profundidad. [5] Sin embargo, se han reportado pocos ejemplos de puntos poliméricos con una emisión de fluorescencia desplazada hacia el rojo. En este trabajo se presenta la producción, optimización y caracterización de puntos poliméricos solubles en agua, con fluorescencia en el verde y elevado rendimiento cuántico. Además, estos puntos poliméricos, implementados sobre un fotoánodo de óxido de titanio, han mejorado la fotoactividad del mismo para procesos de producción limpia de hidrógeno por escisión fotoelectroquímica del agua., Este trabajo ha sido financiado por MICINN/AEI con el proyecto PID2019-104272RB-C51/AEI/10.13039/50110 0 011033 y por el gobierno de Aragón, grupos reconocidos DGA-T03_20R. Agradecimientos a la DGA por la financiación del contrato predoctoral para el periodo 2019-2023., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Nanocristales de quitina: Síntesis, caracterización y aplicaciones de un nanomaterial sostenible

  • Calvo Peña, Víctor
  • Ulcuango, Matías
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen de la comunicación oral presentada en el XVII Simposio de Investigadores Jóvenes RSEQ, 23-26 noviembre 2021, celebrado en Alcalá de Henares., Los biopolímeros nanoestructurados tienen propiedades excepcionales, se extraen de fuentes naturales y tienen el potencial de sustituir plásticos de fuentes no sostenibles, como el petróleo. Estas cualidades se deben a su tamaño en la nano-escala (entre 1 y 100 nm), siendo el más investigado la nanocelulosa en sus distintas variedades. La quitina es el segundo biopolímero más abundante tras la celulosa y se encuentra en distintos seres vivos, por ejemplo, en los exoesqueletos de crustáceos y artrópodos, aportando rigidez y dureza. [3] La quitina se puede transformar en nanocristales de quitina (NCQ) a través de un proceso de hidrólisis ácida. [4] Distintas aplicaciones de los NCQ son la estabilización eficiente en agua de nanomateriales de carbono, la preparación de aerogeles o su uso como refuerzo de otros materiales. En este trabajo se presenta un método optimizado para la obtención de NCQ dispersos en agua con un rendimiento superior al 60% frente al 30% del método inicial. Se han caracterizado por diversas técnicas como difracción de rayos X, termogravimetría o microscopía de transmisión electrónica. Se ha probado también la capacidad de redispersión de los NCQ tras liofilizarlos, obteniendo una dispersión de calidad similar tras un proceso sencillo basado en ultrasonidos, lo cual no sucede con otros biopolímeros nanoestructurados, como los nanocristales de celulosa. Se ha probado el uso de estos NCQ como dispersante en tintas tanto de nanotubos de carbono de una sola capa como de nanofibras de carbono y su integración in situ y ex situ como refuerzo en xerogeles de nanocelulosa bacteriana. En definitiva, la presente comunicación demuestra el enorme potencial de los NCQ como agente dispersante, refuerzo, y aditivo sostenible para obtener desde una perspectiva verde una variedad de nanomateriales compuestos., Financiación del MICINN/AEI bajo los proyectos PID2019-104272RB-C51/AEI/10.13039/501100011033 y PID2020-120439RA-I00, y del Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_20R). Víctor C. agradece a la DGA por la financiación de su contrato predoctoral (Ref. CUS/581/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rational description and modelling of the separation of nanotubes from solid nanoparticles in centrifugation processes

  • Ciria, José Carlos
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
6 figures, 3 tables.-- Supplementary information available., Centrifugation of liquid dispersions is a typical technique being employed to separate single-walled carbon nanotubes (SWCNTs) from big aggregates and impurities. Shining light on the underlying mechanism contributes to a more efficient preparation of corresponding suspensions or inks with improved properties. In this work, we model the sedimentation process by applying fundamental equations and a mathematical algorithm for the centrifugation routine, which takes into account centrifugation parameters and the geometry of nanoparticles. The model is fed with experimental data, namely, the centrifugation mass yield, the SWCNT purity index, metal contents, and nanoparticle sizes measured for pristine, thermally-oxidized, and chemically functionalized SWCNT samples. Particle aggregation, including SWCNT bundling, and changes due to physicochemical pretreatments are taken into account. It is shown that the complete experimental data set can be quantitatively well understood in terms of the particle sedimentation coefficient. The proposed model thus provides a rational concept to optimize centrifugation protocols for the separation of mixtures containing nanoparticles of different shapes., Financial support from Spanish MICINN/AEI under project PID2019-104272RB-C51/AEI/10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis and processing of nanomaterials mediated by living organisms

  • Calvo Peña, Víctor
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
5 figures, 1 scheme., Green living nanofactories: Nanomaterials (NMs) and nanocomposites are typically prepared by procedures that are incompatible with green chemistry and sustainability principles. But some living entities, from single cells to higher organisms, are able to synthesize and process NMs very efficiently under milder conditions. In this Minireview, the advances and prospects of this growing trend are discussed and summarized., Nanomaterials offer exciting properties and functionalities. However, their production and processing frequently involve complex methods, cumbersome equipment, harsh conditions, and hazardous media. The capability of organisms to accomplish this using mild conditions offers a sustainable, biocompatible, and environmentally friendly alternative. Different nanomaterials such as metal nanoparticles, quantum dots, silica nanostructures, and nanocellulose are being synthesized increasingly through living entities. In addition, the bionanofabrication potential enables also the in situ processing of nanomaterials inside biomatrices with unprecedented outcomes. In this Minireview we present a critical state-of-the-art vision of current nanofabrication approaches mediated by living entities (ranging from unicellular to higher organisms), in order to expand this knowledge and scrutinize future prospects. An efficient interfacial interaction at the nanoscale by green means is within reach through this approach., Financial support from Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2020-120439RA-I00, as well as from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_20R) is acknowledged. V.C. gratefully thanks the DGA for funding his PhD contract (Ref. CUS/581/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Fabricación de electrodos fotoactivos para la escisión de la molécula de agua a partir de tintas basadas en nanocelulosa

  • Martínez-Barón, Carlos
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
Póster presentado en la Reunión Bienal de la Sociedad Española de Catálisis - SECAT 2021, celebrada en Valencia, del 18 al 20 de octubre 2021., Financiación de MICINN y AEI (PID2019-104272RB-C51/AEI/10.13039/501100011033), y Gobierno de Aragón (Grupo Reconocido GCNN T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes

  • Dortez, Silvia
  • Sierra, Tania
  • Álvarez Sánchez, Miguel Ángel
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Crevillén, Agustín G.
  • Escarpa, Alberto
4 figures, 2 tables., Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L−1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been financially supported by the TRANSNANOAVANSENS program from the Community of Madrid (P2018/NMT-4349), and the Spanish Ministry of Economy and Competitiveness (CTQ2017-86441-C2-1-R). Additional funding support was from Spanish MINEICO/MICINN under project with references ENE2016-79282-C5-1-R (AEI/FEDER/UE), PID2019-104272RB-C51/AEI/10.13039/501100011033, and PID2020-120439RA-I00. Funding support from Gobierno de Aragón (Grupo Reconocido T03_20R) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Aerogeles unidireccionales de óxido de grafeno como soporte de electrocatalizadores

  • Carrera Jiménez, Clara
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
Póster presentado en la 9ª Jornada de Jóvenes Investigadores de Física y Química de Aragón, celebrada en Zaragoza el 16 de diciembre de 2021., El traslado de propiedades del grafeno hacia estructuras 3-D es de gran interés para la catálisis, electrocatálisis y el almacenamiento de energía. Sin embargo, el grafeno es proclive a apilarse, perdiendo sus propiedades y disminuyendo el área superficial. Los aerogeles de grafeno pueden evitar el problema del apilamiento, logrando mantener propiedades fundamentales como un gran área superficial, gran porosidad para la difusión de moléculas grandes, flexibilidad, resistencia mecánica y conductividad eléctrica. Aquí presentamos un método sintético para producir aerogeles de óxido de grafeno reducido (rGO) controlando la porosidad y la estructura interna, para su uso como soporte de electrocatalizadores en la reacción de evolución de hidrógeno (HER)., MICINN/AEI. PID2019-104272RB-C51/AEI/10.13039/501100011033 Grupo Reconocido DGA T03_20R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Catalytic activity of MWCNT-based inks synthetized by different methods

  • Lorca, Sebastián
  • Santos, Florencio
  • Padilla Martínez, Javier
  • Urbina, Antonio
  • González Domínguez, José Miguel
  • García-Bordejé, José Enrique
  • Álvarez Sánchez, Miguel Ángel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Fernández Romero, Antonio J.
Abstract of the poster presented at "Current Trends in Electrochemistry", 41st Meeting of the Electrochemistry Group of the Spanish Royal Society of Chemistry and 1st French-Spanish Atelier/Workshop on Electrochemistry, Paris (July 6 - 9, 2021)., Research on new catalyst materials for the oxygen reduction reaction (ORR) is the main goal for many research groups around the world, due to its application in fuel cells and metal/air batteries. ORR mainly occurs by two pathways, in alkaline media, the direct four-electron transfer pathway from O2 to OH- or in a two-steps mechanism, where hydrogen peroxide (HO2-) is formed in the first reaction. On fuel cells and metal air batteries applications, the catalyst must be optimized to get the oxygen reduced directly to water through the 4 electrons mechanism1. Due to high price of the precious metals, new materials are tested to be used as catalyst in ORR. Among them, researchers have focused their attention mainly on metal oxides, perovskites or carbonaceous materials. In this communication, we have studied four carbonaceous-based inks synthetized by ultrasonic or hydrothermal methods2, using a rotating ring-disk electrode (RRDE) (Figure 1.A). The production of HO2- (%HO2-), transferred electrons and others parameters will be analyzed and the results will be discussed in depth. Finally, the inks were used as catalysts in the cathode of a PVA-KOH-based zinc/air batteries to replace the most widely used catalyst to date, MnO2, The authors thank the financial support from Fundación Séneca (Región de Murcia, Spain; Ref: 20985/PI/18 and 19882-GERM-15), Spanish Agencia Estatal de Investigación (PID2019-104272RB-C55/ AEI/10.13039/501100011033 and PID2019-104272RB-C51/AEI/10.13039/501100011033), and Gobierno de Aragón (DGA T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Nanocristales de quitina y sus híbridos funcionales con potenciales aplicaciones en energía y sostenibilidad

  • Calvo Peña, Víctor
  • Ulcuango, Matías
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen de la comunicación oral presentada en la 9ª Jornada de Jóvenes Investigadores de Física y Química de Aragón, celebrada el 16 de diciembre de 2021 en Zaragoza., Los biopolímeros nanoestructurados tienen propiedades excepcionales, se extraen de fuentes naturales y tienen el potencial de sustituir plásticos de fuentes no sostenibles, como el petróleo. Estas cualidades se deben a su tamaño en la nano-escala (entre 1 y 100 nm), siendo el más investigado la nanocelulosa en sus distintas variedades [1,2]. La quitina es el segundo biopolímero más abundante tras la celulosa y se encuentra en distintos seres vivos, por ejemplo, en los exoesqueletos de crustáceos y artrópodos, aportando rigidez y dureza [3]. La quitina se puede transformar en nanocristales de quitina (NCQ) a través de un proceso de hidrólisis ácida [4]. Distintas aplicaciones de los NCQ son la estabilización eficiente en agua de nanomateriales de carbono, la preparación de aerogeles o su uso como refuerzo de otros materiales [5,6]. En este trabajo se presenta un método optimizado para la obtención de NCQ dispersos en agua con un rendimiento superior al 60% frente al 30% del método inicial. Se han caracterizado por diversas técnicas como difracción de rayos X, termogravimetría o microscopía de transmisión electrónica. Se ha probado también la capacidad de redispersión de los NCQ tras liofilizarlos, obteniendo una dispersión de calidad similar tras un proceso sencillo basado en ultrasonidos, lo cual no sucede con otros biopolímeros nanoestructurados, como los nanocristales de celulosa. Se ha probado el uso de NCQ como dispersante en tintas tanto de nanotubos de carbono como de nanofibras de carbono y su integración in situ y ex situ como refuerzo en xerogeles de nanocelulosa bacteriana. En definitiva, la presente comunicación demuestra el enorme potencial de NCQ como agente dispersante, refuerzo, y aditivo sostenible para obtener desde una perspectiva verde una variedad de nanomateriales compuestos., Financiación del MICINN/AEI bajo los proyectos PID2019-104272RB-C51/ AEI/10.13039/501100011033 y PID2020-120439RA-I00, y del Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_20R). Víctor C. agradece a la DGA por la financiación de su contrato predoctoral (Ref. CUS/581/2020).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Single-walled carbon nanotube buckypaper as support for highly permeable double layer polyamide/zeolitic imidazolate framework in nanofiltration processes

  • Berned-Samatán, Victor
  • Rubio, César
  • Galán, Alejandro
  • Muñoz, Edgar
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Coronas, Joaquín
  • Téllez, Carlos
11 figures, 1 table.-- Supplementary information available., The development of membranes for nanofiltration applications requires not only selective layers but also suitable supports to control their synthesis as well as to enable efficient and competitive membrane performances. Single-walled carbon nanotube free-standing films (denoted as buckypaper) have been used as supports for the preparation of polyamide (PA) layers by interfacial polymerization (IP) and tested for dead-end nanofiltration for dyes removal (265–1017 Da) from water and organic solvents. The arrangement of the phases during the IP is essential, thus impregnation on the buckypaper support, first with the organic phase and then with the aqueous phase (denoted as inverse IP, iIP) leads to permeances (of up to 28.0 and 31.4 L m−2 h−1 bar−1 for water and methanol, respectively) and rejection values (>96%) that exceed those of the membranes prepared by reversing the impregnation order. Secondly, a double layer PA/zeolitic imidazolate framework (ZIF-8 or ZIF-93) was prepared on the buckypaper (bp). The design of this double layer led to superior membrane performance, in particular for the hydrophilic ZIF-93, as it changes the PA layer properties (increasing both hydrophilicity and surface roughness) providing higher permeances (up to 59.3 and 76.0 L m−2 h−1 bar−1 for water and methanol, respectively) and dye rejections (>98.5%) than the bare PA layer prepared by iIP. This attractive performance of the PA/ZIF-93/bp membrane has been corroborated with experiments in cross-flow nanofiltration and dead-end nanofiltration of aqueous salt solutions, long-term stability nanofiltration and the study the membrane separation performance after a chlorine treatment. The results reported here therefore show the enormous potential of these membrane architectures for a variety of selective separation processes., Grants PID2019-104009RB-I00 and PID2019-104272RB-C51 funded by MCIN/AEI/10.13039/501100011033 are gratefully acknowledged (Agencia Estatal de Investigación (AEI) and MCIN (Ministerio de Ciencia e Innovación), Spain). The Aragón Government is also gratefully acknowledged (Grupos reconocidos T43_20R, T03_20R and E25_20R). V. B.-S. thanks the Grant BES-2017-080209 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Caracterización de un recubrimiento de grafeno en un fotoánodo de TiO2 sensibilizado con un nuevo colorante de tipo D-pi-A

  • Ansón-Casaos, Alejandro
  • Angoy, Sergio
  • Colom, E.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Blesa, María Jesús
Trabajo presentado en la XV Reunión del Grupo Español del Carbón, celebrada del 24 al 27 de abril de 2022 en Granada (España)., Los sistemas híbrido formados por un óxido semiconductor y un colorante orgánico están siendo muy estudiados con vistas al aprovechamiento de luz solar en celdas fotovoltaicas o foto-electrolíticas. En particular, el uso de colorantes de tipo dador-π-aceptor (D-π-A), que no contienen átomos metálicos, resultaría muy conveniente en la producción directa de hidrógeno verde. Sin embargo, uno de los inconvenientes que suelen presentar los colorantes orgánicos es su estabilidad química limitada. Una posible solución sería encontrar un recubrimiento protector que no perjudique a la eficiencia. Con esa idea, hemos depositado una capa de óxido de grafeno (GO) sobre un fotoánodo de TiO2/FTO/vidrio, en el que previamente se había adsorbido un nuevo colorante orgánico D-π-A (AT-Pyri). El sistema fue estudiado mediante microscopía electrónica, espectroscopía Raman y técnicas fotoelectroquímicas en medio neutro., Proyectos financiados por el MICINN y la AEI (PID2019-104272-RB-C51/AEI/10.13039/501100011033 y PID2019-104307GB-I00/AEI/10.13039/501100011033) y el Gobierno de Aragón (Grupo Reconocido T03-20R y E47-20R). Se agradece la colaboración de la Universidad de Zaragoza a través de Universa., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Carbon nanostructures: Building blocks for sustainable layered photoelectrochemical device structures

  • Benito, Ana M.
  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ciria, José Carlos
  • Maser, Wolfgang K.
1 figura.-- Resumen del póster presentado en el congreso ChemOnTubes 2022, celebrado en Donostia-San Sebastián, del 24 al 28 de abril., Layered film architectures fabricated through liquid phase processing technologies enjoy great interest for the development of optoelectronic and photoelectrochemical devices, whereby aspects of sustainability are becoming of increased importance. In this presentation we show that carbon nanostructures, such as graphene oxide, carbon nanotubes and carbon dots with their unique electrical and optical properties can be sustainably processed from surfactant-free aqueous dispersions into layered photoelectrodes. Effects of nanostructurization for the development of functional hybrids and environmentally friendly water-based dispersions, as well as the relevance of interface interactions for attaining enhanced charge-transfer and photoelectrochemical performance of the photoelectrode with respect to water-splitting activities are discussed., Spanish MICINN/AEI: PID2019-104272RB-C51/AEI/10.13039/501100011033; Government of Aragón: Grupos Reconocidos DGA T03_20R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene Oxide: The spring-dance of electrons ("Una Jota Aragonesa")

  • Maser, Wolfgang K.
  • Palacios-Lidón, E.
  • Colchero, J.
  • Ortuño, Miguel
  • Colom, E.
  • Somoza, Andrés M.
  • Benito, Ana M.
Resumen del póster presentado en el congreso ChemOnTubes 2022, celebrado en Donostia-San Sebastián (España), del 24 al 28 de abril., Graphene oxide is a unique nanoscale object with tunable electronic properties, largely influenced by the presence of oxygen functional groups located on the basal plane [1-3]. In this work shine light on the nanoscale charge density and dynamics of isolated GO nanosheets, probed by Kelvin Probe Microscopy [4]. We visualize the existence of charge-domains with respective charge interactions. We further reveal short range fluctuations of jumping electrons and the existence of very long-term relaxation times. The experimental findings are consistent with theoretical simulations, underlining that graphene oxide needs to be understood in terms of an electron glass revealing hopping transport between charge-domains., Spanish MICINN/AEI: Projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2019-104272RB-C52/AEI/10.13039/501100011033; Government of Aragón: Grupos Reconocidos DGA T03_20R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Single-walled carbon nanotubes/nanocellulose hybrid films: towards the development of PEC water splitting photoanodes

  • Martínez-Barón, Carlos
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen de la comunicación oral presentada en el Congreso ChemOnTubes 2022, celebrado en Donostia-San Sebastián (España) del 24 al 28 de Abril., Hydrogen is considered as one of the most suitable alternatives to fossil fuels if produced from water using renewable resources. Particularly, photoelectrochemical (PEC) water splitting is a well-known technology that allows to obtain green hydrogen through a combination of electricity and sunlight. This process requires photoelectrodes composed of a conductive substrate and a photoactive phase. The present work demonstrates that singlewalled carbon nanotubes (SWCNTs) can be processed along with nanocellulose, a biocompatible adjuvant that enables waterborne inks, into conductive films [1]. SWCNT inks were spray-coated over glass substrates in the form of films. Their low electrical resistivity values (Figure 1a) highlight that SWCNT films are valuable alternatives to typically employed opaque substrates in electrochemical devices, such as pyrolytic graphite. Subsequently, a TiO2 layer was deposited onto the SWCNT films, thus rendering the desired photoanodes (Figure 1b). Electrochemical measurements show that the as-prepared photoanodes display a noticeable photocurrent (Figure 1c), being a clear indicative of their water splitting activity. This is an unprecedented feature for this type of electrode configuration., Spanish MICINN/AEI: PID2019-104272RB-C51/AEI/10.13039/501100011033; Government of Aragón: Grupos Reconocidos DGA T03_20R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Highly fluorescent green emissive Carbon Dots: synthesis, characterization and their use in green H2 production

  • Álvarez Sánchez, Miguel Ángel
  • Martínez-Barón, Carlos
  • Hernández-Ferrer, Javier
  • Ansón-Casaos, Alejandro
  • Calvo Peña, Víctor
  • González Domínguez, José Miguel
  • Maser, Wolfgang K.
  • Benito, Ana M.
1 figure.-- Comunicación oral presentada en el congreso ChemOnTubes 2022, celebrado en San Sebastián, del 24 al 28 abril., Carbon Dots (CDs) have attracted considerable attention due to their excellent photoluminescence (PL), high photochemical stability, easy functionalization, water solubility, low toxicity and good biocompatibility, among others. All these properties elevate CDs as a potential alternative to conventional quantum dots, thus overcoming issues of toxicity due to the presence of heavy metals [1]. The outstanding properties of CDs have enabled their application in many research fields, such as biomedicine [2], photocatalysis, photovoltaics, photoelectrochemistry [3], and sensing. Actually, most of the reported CDs show intrinsic blue emission, whose PL mechanism has been studied in depth [4]. However, there is increased research activity to obtain CDs with longer emission wavelengths. Herein, we present the bottom-up microwave synthesis, optimization and characterization of water-soluble CDs with high PL quantum yield and green emission. Moreover, the intense PL is maintained even in the solid state, when embedded in a biopolymer matrix. Finally, we demonstrate that the CDs show great promise as sensitizers in TiO2 photoanodes, integrated into a photoelectrochemical cell for the production of green hydrogen., Spanish MICINN/AEI: PID2019-104272RB-C51/AEI/10.13039/501100011033; Government of Aragón: Grupos Reconocidos DGA T03_20R and PhD grant of MAA IIU/796/2019., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Aerogeles de grafeno como catalizador y electrocatalizador estructurado

  • Carrera Jiménez, Clara
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
1 figura.-- Resumen de la comunicación presentada en la XV Reunión del Grupo Español del Carbón, 24-27 abril 2022, Granada (España).-- C-31-- D.L. GR 695-2022, Existe un gran interés en trasladar las propiedades de las nanoláminas individuales de grafeno hacia la eescala macroscópica mediante la formación de estructuras porosas 3D. Los aerogeles de grafeno tridimensionales tienen potencial para una amplia gama de aplicaciones gracias a sus múltiples propiedades como alta superficie específica, una red porosa que favorece el transporte iónico, resistencia mecánica y conductividad. Un método de preparar estos aerogeles se basa en la gelificación de dispersiones de óxido de grafeno mediante tratamiento hidrotermal en autoclave. Durante este proceso, se produce el entrecruzamiento de las nanoláminas de óxido de grafeno (GO) gracias a la reducción de los grupos funcionales presentes en ellas. Así, se genera la separación de fases necesaria para formar unhidrogel, que se liofiliza para obtener el aerogel de óxido de grafeno reducido (rGO). En este trabajo, se ha optimizado este proceso para conseguir poros unidireccionales y controlar el tamaño de poro. Estos aerogeles se hanusado como soporte de nanodiamantes o partículas metálicas (Pt, Ru) y se han usado posteriormente como catalizadores en distintas reacciones. Asímismo, se han usado en electroquímica como electrocatalizadores en la reacción de reducción de oxígeno y coo superconductores., MINECO (PID2019-104272RB-C51/AEI/10.13039/501100011033), Gobierno de Aragón (Grupo Reconocido Gobierno de Aragón T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PHOTOGRAPH: where PHOTOelectrochemical hydrogen production meets GRAPHene-based interfaces, PHOTOGRAPH: donde la producción fotoelectroquímica de hidrógeno se encuentra con las interfaces basadas en grafeno

  • Martínez-Barón, Carlos
  • Hernández-Ferrer, Javier
  • Galán, Alejandro
  • Ansón-Casaos, Alejandro
  • Ciria, José Carlos
  • Benito, Ana M.
  • Maser, Wolfgang K.
5 figures., [EN] PHOTOGRAPH is subproject (Ref. PID2019- 104272RB-C51) of a coordinated national project entitled NEXT-ENER, associated at the 2019 national R&D program “Proyectos de I+D+i – Retos” and led by the Group of Carbon Nanostructures and Nanotechnology (G-CNN) at the Instituto de Carboquímica (ICB-CSIC). Within the overall frame of the coordinated project, devoted to the integration of new energy conversion and storage technologies and, being developed by five Spanish research groups, PHOTOGRAPH focuses on the photoelectrochemical hydrogen production using optimized graphene-based interfaces. The main motivation of PHOTOGRAPH is to improve the photoelectrochemical device performance while reducing costs and the ecological footprint, directly tackling several problems that humankind is facing nowadays. In this communication, a journey throughout past, present and future perspectives of PHOTOGRAPH is presented, especially emphasizing ongoing activities., [ES] PHOTOGRAPH es un subproyecto (Ref. PID2019- 104272RB-C51) del proyecto coordinado a nivel nacional titulado NEXT-ENER, asociado al programa nacional de I+D “Proyectos de I+D+i – Retos” de 2019, liderado por el Grupo de Nanoestructuras de Carbono y Nanotecnología. Dentro del marco general del proyecto coordinado, dedicado a la integración de nuevas tecnologías de conversión y almacenamiento de energía y, estando desarrollado por cinco grupos de investigación españoles, PHOTOGRAPH se encarga de la producción fotoelectroquímica de hidrógeno mediante interfaces optimizadas basadas en grafeno. La principal motivación de PHOTOGRAPH es la de mejorar la respuesta de los dispositivos fotoelectroquímicos a la vez que se reduce el coste y la huella ecológica de los mismos, afrontando directamente algunos de los problemas a los que la humanidad se está enfrentando actualmente. En esta comunicación, se hará un recorrido a lo largo del pasado, presente y perspectivas futuras de PHOTOGRAPH, haciendo especial énfasis en las actividades se están llevando a cabo., The authors are grateful to the Spanish Ministerio de Ciencia e Innovación / Agencia Estatal de Investigación (MICINN / AEI) for financing the PHOTOGRAPH project under reference PID2019- 104272RB-C51 /AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formamidinium halide salts as precursors of carbon nitrides

  • Ciria-Ramos, Isabel
  • Navascués, Nuria
  • Diaw-Ndiaye, Fatou
  • Furgeaud, Clarisse
  • Ansón-Casaos, Alejandro
  • Haro, Marta
  • Juárez-Pérez, Emilio J.
13 figures, 6 tables.-- Supplementary information available., Pyrolysis of formamidinium halide salts (FAI, FABr) results in a new type of amorphous carbon nitride materials with a mass fraction of 40–50% nitrogen content. Pyrolysis temperature drives final chemical composition, morphology, optical and electrical properties of the material independently of the halide precursor and identifying triazine ring, instead of typical heptazine unit, as the main building block of this material. We elaborated a temperature dependent mechanism of formation for these materials and foresee its potential value as native passivation layer in the field of perovskite solar cells., E.J.J-P acknowledges the funding support from MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR (project grants PID2019-107893RB-I00 and EIN2020-112315, respectively). M.H. acknowledges the funding support from MCIN/AEI/10.13039/501100011033 for the Ramón y Cajal fellowship (RYC-2018-025222-I) and the project PID2019-108247RA-I00. R.A. acknowledges funding from the Spanish MICINN (project grant PID2019-104739 GB-100/AEI/10.13039/501100011033). RA also acknowledge to Government of Aragon (project DGA E13-20R (FEDER, EU)) and European Union H2020 program “ESTEEM3” (823717). A.A-C acknowledges financial support from Spanish MCIN/AEI/10.13039/501100011033 under project PID2019-104272RB-C51/AEI/10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Titanium dioxide electrodes for water photo-electrolysis: modelling of photoelectrochemical processes

  • Ansón-Casaos, Alejandro
  • Ciria, José Carlos
  • Martínez-Barón, Carlos
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Abstract of the work presented at the EHEC 2022, European Hydrogen Energy Conference 18-20 May, 2022. Madrid, Spain., Solar photoelectrolysis of water is considered as a promising route towards green hydrogen production. Since its first demonstration in 1969 [1], improving the efficiency of the process remains the major challenge. Current research efforts focus on the development of improved photoelectrodes enabling higher photocurrents and larger solar-to-hydrogen conversion. Of special interest are photoactive semiconductors being used as photoanodes. Employing concepts of nanostructuring and doping combined with liquid phase technologies for constructing favorable layered configurations, metal oxides offer strategic advantages when it comes towards the use of abundant non-critical materials and sustainable fabrication of efficient large-area photoanodes. Deeper comprehension of the underlying photoelectrochemical processes provides the necessary feedback to a successful progress. In this presentation, boron-doped nanostructured TiO2 film electrodes are used as photoanode. We show that its photoelectrochemical performance can be successfully described by mathematical and physical models. This finding is of wider general interest to understand and improve the performance of nanostructured layered photoanode architectures., Financial support from Spanish MICINN/AEI under project PID2019-104272RB-C51/AEI/10.13039/ 501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Oxygen reduction reaction by cobalt dispersed on carbon nanostructured materials

  • Hernández-Ferrer, Javier
  • Carrera Jiménez, Clara
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
1 figura.-- Resumen del póster presentado en el IX International Symposium on Carbon for Catalysis, CARBOCAT, 28-30 junio 2022, Zaragoza, España., Transition metal modified carbon nanomaterials are being widely investigated as electrocatalysts for the oxygen reduction reaction, since they are promising candidates for the replacement of precious metal catalysts in fuel cells, as well as other applications. These materials possess a high versatility; depending on the preparation conditions, and subsequently, the structure and electronic environment of the supported cobalt (single site, nanoparticulate), high activities and selectivities may be achieved for both the four-electron and two-electron pathways. The nature of carbon support is also known to be of crucial importance in these materials [1]. Heteroatom inclusion (N-doping) and the porosity of the material are some of the key parameters than can be explored, and tailored towards the desired application. In this work, Multi-walled carbon nanotubes (MWCNTs, Nanocyl), electrochemically synthesized nitrogen-doped graphene quantum dots (NGQDs), and graphene aerogels (GA) were used as support for cobalt electrocatalysts., Ministerio de Ciencia e Innovación (PID2019-104272RB-C51/AEI/10.13039/501100011033 project), and Gobierno de Aragón (Grupo Reconocido T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Photoelectrocatalytic water splitting on carbon dot/titania electrodes with methanol oxidation

  • Ansón-Casaos, Alejandro
  • Hernández Ferrer, Mariano
  • Lira-Cantú, Mónica
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure, 2 tables.-- Abstract of the poster presented at the 9th International Symposium on Carbon for Catalysis, IX CarboCat, 28th-30th June, Zaragoza, Spain., Short-chain alcohols such as methanol (MeOH) work well as hole scavengers in the photocatalytic water splitting on TiO2. Besides, MeOH is widely studied as a model pollutant in water. Both ideas are often combined to achieve efficient water purification processes with the simultaneous production of hydrogen. In this communication, we present a photoelectrochemical study on carbon dot (CD)/TiO2 electrodes., Financial support from Spanish MICINN/AEI under project PID2019-104272RB-C51/AEI/ 10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido) is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Unidirectionally porous RGO aerogels as electrocatalyst support

  • Carrera Jiménez, Clara
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
2 figures.-- Abstract of the poster presented at the IX Carbocat 2022, 28th-30th June, Zaragoza, Spain., Interest in 3D-graphene structures is increasing as a way to translate the characteristics of individual graphene sheets onto the macroscale. Among them, graphene aerogels offer useful properties such as high specific surface area, open porous network allowing ion transport, flexibility, tough mechanical strength while constituting conductive framework structures.[1] Gelation of graphene oxide (GO) dispersions is the most common way to obtain graphene aerogels.[2] For this, GO dispersions are subjected to an hydrothermal treatment in an autoclave that leads to the removal of oxygenated functional groups. This reduction directly increases the hydrophobicity and reduces the amount of surface charges, producing the crosslinking of the reduced GO (RGO) sheets. Therefore, phase separation takes place inducing the hydrogel formation. Eventually, a further freeze-drying step allows to obtain the desired RGO aerogels. In this work, different conditions of the hydrothermal process such as time or pH have been studied. pH has been found to be key in the reduction degree and morphology of the final RGO hydrogel and subsequent transformation into an aerogel. Varying from acidic pH to basic pH, which is attained by the addition of ammonia during the hydrogel formation, an increase of the porosity, is observed., Spanish MICINN/AEI: PID2019- 104272RB-C51/AEI/10.13039/501100011033; Government of Aragón: Grupos Reconocidos DGA T03_20R and PhD grant of CC IIU/796/2019.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface-enriched boron-doped TiO2 nanoparticles as photocatalysts for propene oxidation

  • Cano Casanova, Laura
  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Garro, Núria
  • Lillo-Ródenas, Maria Ángeles
  • Román Martínez, María del Carmen
2 schemes, 8 figures.-- Supplementary information available., A series of nanostructured boron-TiO2 photocatalysts (B-X-TiO2-T) were prepared by sol–gel synthesis using titanium tetraisopropoxide and boric acid. The effects of the synthesis variables, boric acid amount (X) and crystallization temperature (T), on structural and electronic properties and on the photocatalytic performance for propene oxidation, are studied. This reaction accounts for the remediation of pollution caused by volatile organic compounds, and it is carried out at low concentrations, a case in which efficient removal techniques are difficult and costly to implement. The presence of boric acid during the TiO2 synthesis hinders the development of rutile without affecting the textural properties. X-ray photoelectron spectroscopy analysis reveals the interstitial incorporation of boron into the surface lattice of the TiO2 nanostructure, while segregation of B2O3 occurs in samples with high boron loading, also confirmed by X-ray diffraction. The best-performing photocatalysts are those with the lowest boron loading. Their high activity, outperforming the equivalent sample without boron, can be attributed to a high anatase and surface hydroxyl group content and efficient photo-charge separation (photoelectrochemical characterization, PEC), which can explain the suppression of visible photoluminescence (PL). Crystallization at 450 °C renders the most active sample, likely due to the development of a pure anatase structure with a large surface boron enrichment. A shift in the wavelength-dependent activity profile (PEC data) and the lowest electron–hole recombination rate (PL data) are also observed for this sample., The authors thank funding to the Spanish Ministry of Science, Innovation and Universities and FEDER, project of reference RTI2018-095291-B-I00, GV/FEDER (PROMETEO/2018/076), and University of Alicante (VIGROB-136) for financial support. Financial support from Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2019-104272RB-C53/AEI/10.13039/501100011033 and the Diputación General de Aragón under project T03_20R (Grupo Reconocido) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Explosive percolation yields highly-conductive polymer nanocomposites

  • Meloni, Manuela
  • Large, Matthew J.
  • González Domínguez, José Miguel
  • Víctor-Román, Sandra
  • Fratta, Giuseppe
  • Istif, Emin
  • Tomes, Oliver
  • Savage, Jonathan P.
  • Ewels, Christopher P.
  • Peláez-Fernández, Mario
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • King, Alice A. K.
  • Ogilvie, Sean P.
  • Dalton, Alan B.
4 figures.-- The processed data used in this study are available in the Sussex Figshare database under https://doi.org/10.25377/sussex.21388851. Unprocessed data were available upon request from the corresponding author.-- Supplementary information available., Explosive percolation is an experimentally-elusive phenomenon where network connectivity coincides with onset of an additional modification of the system; materials with correlated localisation of percolating particles and emergent conductive paths can realise sharp transitions and high conductivities characteristic of the explosively-grown network. Nanocomposites present a structurally- and chemically-varied playground to realise explosive percolation in practically-applicable systems but this is yet to be exploited by design. Herein, we demonstrate composites of graphene oxide and synthetic polymer latex which form segregated networks, leading to low percolation threshold and localisation of conductive pathways. In situ reduction of the graphene oxide at temperatures of <150 °C drives chemical modification of the polymer matrix to produce species with phenolic groups, which are known crosslinking agents. This leads to conductivities exceeding those of dense-packed networks of reduced graphene oxide, illustrating the potential of explosive percolation by design to realise low-loading composites with dramatically-enhanced electrical transport properties., This work was funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 642742. A.B.D. acknowledges EPSRC Capital Award EP/S018069/1. W.K.M. and A.B. acknowledge support from Spanish MCIN/AEI under project PID2019-104272RB-C51/AEI/10.13039/501100011033 and the Government of Aragon (DGA) under project “Grupos Consolidados” T03-20R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Stability of a pyrimidine-based dye-sensitized TiO2 photoanode in sacrificial electrolytes

  • Ansón-Casaos, Alejandro
  • Martínez-Barón, Carlos
  • Angoy, Sergio
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Blesa, María Jesús
7 figures., Dye sensitization of semiconductor metal oxides aims to extend the light absorption range into the visible region, of particular interest for their use as photoanodes in photoelectrochemical (PEC) water splitting. Organic dyes, however, suffer from limited chemical stability when they are exposed to constant potential and irradiation in aqueous media. Thus, in this work, we evaluate a novel metal-free donor-π-acceptor (D-π-A) dye (AT-Pyri), demonstrating significant sensitization of film photoanodes based on TiO2 nanoparticles. Among a series of tested sacrificial agents, the addition of triethanolamine (TEOA) to the sodium sulphate electrolyte prevents the degradation of AT-Pyri even after several hours of operation. Combining two sacrificial agents (methanol and TEOA) results in a synergetic improvement of the PEC water-splitting activity. Notably, the stabilization of the AT-Pyri photoanode is accompanied by a substantial increase in the photocurrent over the reference TiO2 photoanode, while the associated spikes in transient photocurrent measurements disappear., Financial support from Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2019-104307GB-I00/AEI/10.13039/501100011033, and the Diputación General de Aragón-European Social Found under projects T03-20R and E47-20R is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preparation of cellulose nanocrystals: controlling the crystalline type by one-pot acid hydrolysis

  • Calvo Peña, Víctor
  • Álvarez Sánchez, Miguel Ángel
  • Güemes, Lucas
  • Martínez-Barón, Carlos
  • Baúlde, Sandra
  • Criado, A.
  • González Domínguez, José Miguel
  • Maser, Wolfgang K.
  • Benito, Ana M.
6 figures.-- Supplementary information available., Cellulose nanocrystals (CNCs) have aroused increasing interest owing to their renewable origin and excellent properties derived from their size and morphology. Based on their chain orientation, CNCs can be prepared as two main allomorphs (I or II). However, achieving pure CNC allomorphs still requires enhanced control on the CNCs synthesis process and improved understanding of the involved reaction parameters. In this work, we study in detail a set of parameters for CNC synthesis using one-pot acid hydrolysis and evaluate their influence on the outcome with respect to yield, purity, and repeatability. We also demonstrate that a fast, nondestructive, and accurate methodology based on dynamic light scattering is an efficient alternative to the usual structural analysis of the synthesis outcome. Finally, we provide an improved protocol to reliably obtain each allomorph with mass yields of 25% for type I and 40% for type II. Emphasis is put on the reduction of the environmental impact and the overall preparation time., Financial support from Spanish MICINN/AEI under Projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2020-120439RA-I00, as well as from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_20R) is acknowledged. V.C. and M.A.A. gratefully thank the DGA for funding their Ph.D. contracts (ref. CUS/581/2020 and ref. IIU/796/2019). A.C. thanks MICINN for his research grant (Ramon y Cajal No. RYC2020-030183-I). S.B. thanks MICINN for funding (PID2020-117885GA-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tungsten disulfide-interfacing nickel-porphyrin for photo-enhanced electrocatalytic water oxidation

  • Minadakis, Michail P.
  • Canton-Vitoria, Rubén
  • Stangel, Christina
  • Klontzas, Emmanuel
  • Arenal, Raúl
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Tagmatarchis, Nikos
11 figures, 2 tables.-- Supporting information available., Covalent functionalization of tungsten disulfide (WS2) with photo- and electro-active nickel-porphyrin (NiP) is reported. Exfoliated WS2 interfacing NiP moieties with 1,2-dithiolane linkages is assayed in the oxygen evolution reaction under both dark and illuminated conditions. The hybrid material presented, WS2−NiP, is fully characterized with complementary spectroscopic, microscopic, and thermal techniques. Standard yet advanced electrochemical techniques, such as linear sweep voltammetry, electrochemical impedance spectroscopy, and calculation of the electrochemically active surface area, are used to delineate the catalytic profile of WS2−NiP. In-depth study of thin films with transient photocurrent and photovoltage response assays uncovers photo-enhanced electrocatalytic behavior. The observed photo-enhanced electrocatalytic activity of WS2−NiP is attributed to the presence of Ni centers coordinated and stabilized by the N4 motifs of tetrapyrrole rings at the tethered porphyrin derivative chains, which work as photoreceptors. This pioneering work opens wide routes for water oxidation, further contributing to the development of non-noble metal electrocatalysts., Financial support by the Hellenic Foundation for Research and Innovation HFRI under the “2nd Call for HFRI Research Projects to support Faculty Members and Researchers” (Project Number: 2482) to N.T. is acknowledged. [...] R.A. acknowledges support from Spanish MCIN (PID2019-104739GB-I00/AEI/10.13039/501100011033), Government of Aragon (projects DGA E13-20R) and from EU H2020 “ESTEEM3” (Grant number 823717) and Graphene Flagship (881603). W.K.M and A.M.B acknowledge support from Spanish MCIN (PID2019-104272RB-C51/AEI/10.13039/501100011033), and the Government of Aragon (Grupos Reconocidos DGA T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3D structures

  • González Domínguez, José Miguel
  • Baigorri, Alejandro
  • Álvarez Sánchez, Miguel Ángel
  • Colom, E.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
11 figures, 1 table., In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray- or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures., This research was funded by Spanish MINEICO/MICINN, under project references ENE2016-79282-C5-1-R (AEI/UE/FEDER) and PID2019-104272RB-C51/AEI/10.13039/501100011033, and the Gobierno de Aragón (Grupo Reconocido DGA-T03_20R). J.M.G.-D. greatly acknowledges Spanish MINEICO for his ‘Juan de la Cierva Incorporation’ contract and associated research funds (ref. IJCI-2016-27789). The APC predoctoral contracts of E.C. and M.Á.Á.-S. were funded by the Spanish MINEICO (BES2017-080020, including EU Social Funds) and the Gobierno de Aragón, respectively. The work performed at the University of Zaragoza was funded by the MICINN (PID2019-104307GB-I00/AEI/10.13039/501100011033) and Gobierno de Aragón (E47_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of temperature and presence of minor amount of metal on porous carbon materials derived from ZIF8 pyrolysis for electrocatalysis

  • Hernández-Ferrer, Javier
  • Gracia Martín, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
11 figures, 4 tables.-- Supplementary information available., ZIF8 without and with adsorption of minor amounts of Co precursor have been pyrolized at different temperatures studying systematically the effect of carbonization temperature on the texture, composition and ORR performance both in acidic and basic media. The increase of pyrolysis temperature diminished the N content but increased the graphitic character. The trade-off between these two parameters in metal-free electrocatalysts resulted in an improvement of ORR performance, which is met for the highest pyrolysis temperature of 1000 ºC. Moreover, the adsorption of minor amount of Co precursor enhanced further the ORR performance, increased the graphitic character and the porosity of the resulting carbon material. Morphologically, these carbon materials kept the polyhedral shape of ZIF8 and were covered by graphitic nanostructures devoid of metal nanoparticles. Co metal catalysed the growth of these graphitic nanostructures and concomitantly is stabilized as monoatomic Co-Nx-C species preventing the agglomeration as metal nanoparticles. Therefore, the need of an acid washing step is avoided, which is usually necessary in the carbonization of other metal containing MOFs., Grants PID2020-119160RB-C21 and PID2019-104272RB-C51 funded by MCIN/AEI/10.13039/501100011033 and Aragón Government (Aragón T03_20R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene oxide: Key to efficient charge extraction and suppression of polaronic transport in hybrids with poly (3-hexylthiophene) nanoparticles

  • Colom, E.
  • Hernández-Ferrer, Javier
  • Galán, Alejandro
  • Ansón-Casaos, Alejandro
  • Navarro Rodríguez, Mario
  • Palacios-Lidón, E.
  • Colchero, J.
  • Padilla Martínez, Javier
  • Urbina, Antonio
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
Nanoparticles (NPs) of conjugated polymers in intimate contact with sheets of graphene oxide (GO) constitute a promising class of water-dispersible nanohybrid materials of increased interest for the design of sustainable and improved optoelectronic thin-film devices, revealing properties exclusively pre-established upon their liquid-phase synthesis. In this context, we report for the first time the preparation of a P3HTNPs–GO nanohybrid employing a miniemulsion synthesis approach, whereby GO sheets dispersed in the aqueous phase serve as a surfactant. We show that this process uniquely favors a quinoid-like conformation of the P3HT chains of the resulting NPs well located onto individual GO sheets. The accompanied change in the electronic behavior of these P3HTNPs, consistently confirmed by the photoluminescence and Raman response of the hybrid in the liquid and solid states, respectively, as well as by the properties of the surface potential of isolated individual P3HTNPs–GO nano-objects, facilitates unprecedented charge transfer interactions between the two constituents. While the electrochemical performance of nanohybrid films is featured by fast charge transfer processes, compared to those taking place in pure P3HTNPs films, the loss of electrochromic effects in P3HTNPs–GO films additionally indicates the unusual suppression of polaronic charge transport processes typically encountered in P3HT. Thus, the established interface interactions in the P3HTNPs–GO hybrid enable a direct and highly efficient charge extraction channel via GO sheets. These findings are of relevance for the sustainable design of novel high-performance optoelectronic device structures based on water-dispersible conjugated polymer nanoparticles., This work was funded by Spanish MCIN/AEI/10.13039/501100011033 under projects PID2019-104272RB-C51, PID2019-104272RB-C52, PID2019-104272RB-C55, and PID2019-104739GB-I00. Financial support from Gobierno de Aragon (DGA) under project “Grupos Consolidados” T03_20R is acknowledged. E.C. is grateful for PhD grant BES2017-080020 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. M.N.R.’s work was financed by grant PID2019-104272RB-C52/PRE2020-094503 funded by MCIN/AEI/10.13039/501100011033 and by “‘ESF Investing in your future”’. R.A. acknowledges support from EU H2020 “ESTEEM3” (Grant number 823717) and Graphene Flagship (881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modelling TiO2 photoanodes for PEC water splitting: Decoupling the influence of intrinsic material properties and film thickness

  • Ansón-Casaos, Alejandro
  • Ciria, José Carlos
  • Martínez-Barón, Carlos
  • Villacampa, Belén
  • Benito, Ana M.
  • Maser, Wolfgang K.
7 figures, 4 tables., Semiconductor metal oxides are intensively studied in electrodes for photoelectrochemical (PEC) water splitting. On a series of nanoparticulate TiO2 photoanodes, we analyze specific fabrication variables by means of data fitting. First, the experimental outcome is gathered using PEC characterization techniques, mostly cyclic voltammetry and transient photocurrent measurements. Subsequently, we apply models to gain insights into the involved charge trapping and transfer phenomena. We find that capacitance coefficients and the switch-on transient kinetics depend on the TiO2 layer thickness, respectively indicating surface mechanisms and stationary regimes that are mediated by light accessibility. On the contrary, exponential factors of capacitance are independent of thickness, but reflect changes in the density of electron states with different sintering atmospheres. Also, the transfer resistance in the electrolyte side is indirectly influenced by sintering. Through meticulous quantitative analysis of trends, we stablish simple mathematical relationships that connect thickness-dependent parameters. This knowledge delves into fundamental mechanisms governing the TiO2 photoelectrode behaviour, and aims to facilitate further improvements in the efficiency of materials and electrodes for green hydrogen production., Financial support from Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2019-104307 GB-100, and the Diputación General de Aragón under projects T03_23R and E47_23R (Grupos Reconocidos) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Appendix A. Supplementary data for Stability of a pyrimidine-based dye-sensitized TiO2 photoanode in sacrificial electrolytes [Dataset]

  • Ansón-Casaos, Alejandro
  • Martínez-Barón, Carlos
  • Angoy, Sergio
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Blesa, María Jesús
General methods: Melting points were obtained on a Gallenkamp apparatus in open capillaries and are uncorrected. 1H and 13C-NMR spectra were recorded on a Bruker AV400 at 400 MHz and 100 MHz respectively; δ values are given in ppm (relative to TMS) and J values in Hz. The apparent resonance multiplicity is described as s (singlet), br s (broad singlet), d (doublet), t (triplet), q (quartet) and m (multiplet).1H-1H COSY and 1H-13C-HSQC experiments were recorded in order to establish peaks assignment. Electrospray mass spectra were recorded on a Bruker MicroToF-Q spectrometer and on a Bruker TIMS-TOF; accurate mass measurements were achieved using sodium formate as external reference. UV-Visible spectroscopy was performed with an UV-vis Cary 6000. Also, the quantity of dye adsorbed on the TiO2 anode was estimated by desorption experiments; the desorption solution of was 10-3 M NaOH in H2O/THF (20:80). Cyclic Voltammetry (CV) measurements were performed with a μ-Autolab ECO-Chemie potenciostat, using a glassy carbon working electrode, Pt counter electrode, and Ag/AgCl reference electrode. The experiments were carried out under argon, in CH2Cl2 with Bu4NPF6 as supporting electrolyte (0.1mol L-1). Scan rate was 100 mV s-1.-- Synthetic details: The aldehyde AT-CHO [1] (80 mg, 0.346 mmol), 4-methylpyrimidine (32 μL, 0.346 mmol) and Aliquat 336 (16 μL, 0.035 mmol) was refluxed in 5.2 mL NaOH (5M). The mixture was maintained during 1h, then was cooled and the precipitate was filtered off and washed with water. The aqueous phase was extracted with CH2Cl2 (3x20 mL). The organic phase was dried with MgSO4 and the solvent was removed under reduced pressure. The crude product was purified by flash chromatography increasing the polarity of the eluent hexane/ethyl acetate from 8:2 to 6:4 to obtain the desired product, an orange solid (51 mg, 48%). Molecular weight (g/mol): 307.41 Melting point at 760 mm Hg (˚C): 227.7 IR (KBr) ν (cm-1): 1571 (C=N) Uv-Vis data λmax (CH2Cl2)/nm 428 (ε/mol-1·dm3·cm-1 1.98 ± 0.02·104) 1H-NMR (CDCl3, 400 MHz) δ (ppm): 3.01 (s, 6H), 6.72 (d, J= 8Hz, 2H), 6.75 (d, J=16Hz, 1H), 7.11 (d, J = 4 Hz, 1H), 7.14-7.23 (bs, 2H), 7.51 (d, J = 8 Hz, 2H), 7.99 (d, J = 16 Hz, 1H), 8.62 (bs, 1H), 9.11 (s, 1H) 13C-NMR (CDCl3 , 100 MHz) δ (ppm): 40.5, 112.5, 118.5, 121.5, 123.0, 127.1, 130.8, 131.8, 138.4, 147.7, 150.1, 156.8, 158.5, 162.4. HRMS (ESI)+: Found [M+H]+ 308.1215; molecular formula C18H17N3S requires [M+H]+ 308.1216.-- Under a Creative Commons license CC-BY-NC-ND 4.0, 1. General methods 2. Synthetic details 3. Absorption spectra a. Figure S.1. UV-Vis Absorption spectra in CH2Cl2 and concentration dependence of AT-Pyri dye 4. Electrochemical characterization a. Figure S.2. CV analysis of AT-Pyri in CH2Cl2 b. Table S.1. Optical parameters, transition energy E0-0 and potential values Eox and Eox* 5. NMR spectra 6. References, Financial support from Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2019-104307GB-I00/AEI/10.13039/501100011033, and the Diputación General de Aragón-European Social Found under projects T03-20R and E47-20R is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Oil-in-water pickering emulsions stabilized with nanostructured biopolymers: a venue for templating bacterial cellulose

  • Calvo Peña, Víctor
  • Fuentes Varela, Laura
  • Berdejo, Daniel
  • González Domínguez, José Miguel
  • Maser, Wolfgang K.
  • Benito, Ana M.
Pickering emulsions (PEs) differ from conventional emulsions in the use of solid colloidal particles as stabilizing agents instead of traditional amphiphilic molecules. Nanostructured biopolymers (NBs) emerge as a promising alternative for PE stabilization owing to their remarkable biocompatibility, abundant availability, and low cost. To explore this potential, a study is herein presented, in which cellulose nanocrystals (CNCs), both type I and type II allomorphs, and chitin nanocrystals (ChNCs) were used for stabilizing oil-in-water PEs prepared by the use of ultrasound. Sunflower oil was selected as the oil phase as it offers the advantages of being edible, renewable, and inexpensive. By utilizing ζ-potential, static light diffraction, and visual observations, we determined the optimal oil/water ratio for each type of NB to obtain stable emulsions after 14 days. The optimized PEs were used to form bacterial nanocellulose composites through emulsion templating. To our knowledge, this study represents a pioneering work in exploiting oil-in-water PEs for this approach. Additionally, it entails the first utilization of nonmercerized type II CNCs as stabilizers for PEs, while also establishing a direct comparison among the most relevant NBs. The resulting composites exhibited a unique morphology, composed of larger pores compared to standard bacterial nanocellulose aerogels. These findings highlight the notable potential of NBs as stabilizers for PEs and their ability to generate green nanocomposites with tailored properties., This research was funded by Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2020-120439RA-I00, from Spanish CSIC (PIE iniciación ref. 202280I007), and support from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_23R) is acknowledged. Víctor Calvo thanks the DGA for funding their Ph.D. contracts (Ref. CUS/581/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of structural properties in the electrical impedance spectrum of multi-walled carbon nanotube/graphite/polyester ternary composites

  • Belhimria, R.
  • Samir, Zineb
  • Boukheir, S.
  • Soreto Teixeira, S.
  • Len, A.
  • Szakál, A.
  • Achour, M. E.
  • Ansón-Casaos, Alejandro
  • El Hasnaoui, M.
  • Costa, L. C.
  • González Domínguez, José Miguel
The aim of this study is to establish a connection or correlation between the electrical and structural properties of ternary composites, which were prepared by adding multi-walled carbon nanotubes (MWCNT) and graphite (Gr) as conductive fillers to an insulating polyester matrix. The study utilized small-angle neutron scattering, infrared and Raman spectroscopy for structural characterization. Electrical measurements were conducted within a frequency range of 100 Hz to 1 MHz and a temperature range of 200–380 K. The alternating current (AC) conductivity showed a frequency dependence following Jonscher's power law. The temperature dependence of the AC conductivity suggested that the electrical conduction within the material is a thermally activated process. The temperature-dependent behavior of the direct current (DC) conductivity suggests that below and above the critical temperature, there is a pronounced positive and negative temperature coefficient of resistivity, respectively. In comparison to MWCNT/polyester or Gr/polyester composites, the percolation threshold of the MWCNT/Gr/polyester composite is much lower. Additionally, applying the Arrhenius equation to analyze the temperature dependence of DC conductivity reveals that the inclusion of MWCNT and Gr in the polyester matrix results in a decrease in activation energy., Authors acknowledge financial support from Spanish MICINN/AEI under Project PID2019- 104272RB-C51/AEI/10.13039/501100011033, Diputación General de Aragón for Project T03_20R (Grupo Reconocido), and FEDER through the COMPETE 2020 Programme and National Funds through FCT—Portuguese Foundation for Science and Technology under the Project UID/CTM/50025/2019., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Supplementary materials for Oil-in-water pickering emulsions stabilized with nanostructured biopolymers: a venue for templating bacterial cellulose [Dataset]

  • Calvo Peña, Víctor
  • Fuentes Varela, Laura
  • Berdejo, Daniel
  • González Domínguez, José Miguel
  • Maser, Wolfgang K.
  • Benito, Ana M.
Chemical structure of the nanostructured biopolymers: Figure S1. Chemical structure of cellulose nanocrystals (A) and chitin nanocrystals (B).-- Polydispersity results of nanostructured biopolymers: Figure S2. Polydispersity indexes of the NBs (CNCs I, CNCs II and ChNCs) in water with different NaCl concentrations.-- Evolution of the visual appearance of PEs: Figure S3. Evolution over time of the PEs made with CNCs I. The images were used to determine the creaming index. Figure S4. Evolution over time of the PEs made with CNCs II. The images were used to determine the creaming index. Figure S5. Evolution over time of the PEs made with ChNCs. The images were used to determine the creaming index.-- BNC production with ChNCs without PEs: Figure S6. BNC culture media without ChNCs (left) and two different ChNCs concentrations (center and right) after 14 days since inoculation. It can be observed that ChNCs precipitate, what reduces the ChNCs incorporation in the BNC composites.-- BNC hydrogels prepared with emulsified culture media: Figure S7. BNC hydrogels prepared with emulsified culture media after cleaning.-- Under Creative Commons Attribution (CC BY) license., Chemical structure of the nanostructured biopolymers. Polydispersity results of nanostructured biopolymers. Evolution of the visual appearance of PEs. BNC production with ChNCs without PEs. BNC hydrogels prepared with emulsified culture media., This research was funded by Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2020-120439RA-I00, from Spanish CSIC (PIE iniciación ref. 202280I007), and support from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_23R) is acknowledged. Víctor Calvo thanks the DGA for funding their Ph.D. contracts (Ref. CUS/581/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In depth investigations of graphene oxide reduction via in-situ TEM measurements

  • Peláez-Fernández, Mario
  • Hettler, Simon
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
RA acknowledges funding from the EU H2020 program “Graphene Flagship” (Grant Agreement 881603) and EU H2020 program “ESTEEM3” (Grant Agreement 823717). MCIN (project grants PID2019-104739GB-I00/AEI/10.13039/501100011033 and PID2019-104272RB-C51/AEI/10.13039/501100011033) are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoparticles of poly(3-hexylthiophene): Toward a solvent-independent performance of electrochromic films

  • Canovas Saura, Antonio
  • Colom, E.
  • Padilla Martínez, Javier
  • Urbina, Antonio
  • Maser, Wolfgang K.
  • Benito, Ana M.
6 figures, 2 tables.-- Supplementary information available., Nanoparticles of poly(3-hexylthiophene), P3HT(NP), uniquely enable the preparation of stable dispersions in environmentally-friendly media and thus offer a sustainable liquid phase fabrication of electrochromic device structures. In this work, we assess the electrochromic performance of P3HT(NP) films spray-coated from either tetrahydrofuran (THF)-water or chloroform (CHCl3)-ethanol dispersions on ITO substrates. The nanoparticle films exhibit consistent and reproducible high optical contrast values of around 50 %, t90-switching speeds of about 0.45 s and a cycling stability of approximately 200 cycles for a 20 % performance retention, independent of the solvent being used. Conversely, non-nanostructured P3HT films spray-coated from THF or CHCl3 reveal a strong solvent dependent variability in their electrochromic behavior presenting low optical contrast, high switching speeds and fast degradation rates in the case of CHCl3. The solvent independent electrochromic characteristics of P3HT nanoparticle films is related to a consistent availability of accessible electroactive sites provided by a homogeneous porous P3HT network structure formed on the underlying substrate, as probed by SEM and profilometric studies. Our findings reveal that the use of nanoparticles of P3HT and its environmentally benign liquid phase processing, a concept which is extendable to other electrochromic polymers, opens a sustainable pathway toward the large-area fabrication of electrochromic device structures with favorable and consistent performance parameters., This work was funded by Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación (MCIN-AEI, Spain) under Grant numbers PID2019-104272RB-C55/AEI/10.13039/501100011033, PID2019-104272RB-C51/AEI/10.13039/501100011033 and TED2021-129609B-I00/MCIN/AEI/10.13039/501100011033 (co-funded by European Union NextGenerationEU/PRTR). A.C-S acknowledges financial support from UPCT-Banco Santander through a research grant (“Iniciación en investigacion” Program 2021). W.M. and A.M.B acknowledge financial support from Gobierno de Aragon (DGA) under project “Grupos de Investigación Reconocidos” T03_23R. E.C. is grateful for his PhD grant from MINECO (FPI BES2017-080020) and associated European Social Funds (ESF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Supplementary data for Nanoparticles of poly(3-hexylthiophene): Toward a solvent-independent performance of electrochromic films [Dataset]

  • Canovas Saura, Antonio
  • Colom, E.
  • Padilla Martínez, Javier
  • Urbina, Antonio
  • Maser, Wolfgang K.
  • Benito, Ana M.
S2. Redox charge density & thickness: Figure S2. Cyclic voltamogramms of the different P3HT film series with different film thicknesses (indicated by different colors) taken at a scan rate of 20 mV/s. A) P3HT-CHCl3 B) P3HT-THF C) P3HT-CHCl3(NP) D) P3HT-THF(NP). Respective figures E), F) ,G) and H) represent the linear relations found between resulting redox charge densities and measured thicknesses (colors of each film thickness according to the corresponding cyclic voltammogram). Redox charge density values in units of mCcm-2 are calculated by the integration of the anodic and cathodic CV curves for each thickness followed by dividing the obtained values by the scan rate and the probed surface area.-- Figure S3. Transmittance values at 520 nm for the P3HT film series taken in their A) oxidized transparent states and B) neutral colored states as a function of the calculated redox charge density. Symbols represent experimental data points. Lines represent the fitted curves according to exponential decay functions. Regression coefficients r2 are indicated for all the film series. The transmittance curve for P3HT-CHCl3 in the neutral state not only shows overall higher transmittance values but also its exponential fitting curve with lowest regression coefficient strongly deviates from the behavior of all the other films. The different and rather poor transmittance behavior reflects the non-continuous island-like coating of the ITO substrate obtained for this sample by the employed spray-coating process, as demonstrated by the SEM and profilometry results in the main manuscript (Figure 5D and 6D, respectively). The poor transmittance behavior of the spray-coated P3HT-CHCl3 sample in the neutral state thus accounts for the largely different contrast behavior compared to the other P3HT samples, with an apparent shift of the optimum contrast range towards rather high, i.e. out-of-range redox charge density values, as a consequence of unsatisfying fitting results.--, Figure S4. Transmittance spectra of a P3HT film in its neutral and oxidized states.-- Figure S5. A) Transmittance vs. time plot a P3HT-THF film. B) Contrast vs. pulse length extracted from the previous data and corresponding fitting function from which τ values can be obtained.-- Figure S6. A) Transmittance vs. time plot for a P3HT-THF film. B) Contrast vs. number of cycles extracted from the previous data and corresponding fitting function from which N80 values can be obtained.-- Figure S7. Characterization of spin-coated P3HT films deposited from chloroform. A) SEM image obtained at 30 kX magnification (scale bar 200 nm). B) Profilometry of a representative film with average thickness of 77 nm. C) Transmittance in transparent and colored states, together with resulting contrast, versus redox charge density. D) Switching speeds, represented by t90 values versus redox charge density. E) Cycling stability, represented by the number of cycles corresponding to a 20 % loss of the initial contrast value, i.e. N80 value. F) Images of delaminated films after cycling stability tests. Table S1. Electrochromic performance parameters for spin-coated P3HT-CHCl3 series.--, Under a Creative Commons license BY-NC-ND 4.0., S1. UV-vis absorption spectra. S2. Redox charge density & thickness. S3. Stationary transmittance at 520 nm. S4. Transmittance spectra. S5. Switching speed. S6. Stability test. S7. Spin-coated P3HT-CHCl3 film. References., S1. UV-vis absorption spectra: The UV-vis spectra (Figure S1) of P3HT-THF and CHCl3 solutions show a featureless broad π-π* transition absorption band with its maximum at 445 nm, typical for amorphous P3HT. This band is red-shifted to 510 nm for the nanoparticle polymer P3HT (NP) dispersions. The spectra for these dispersions also show the appearance of peaks at 520 nm, 560 nm, and 620 nm, which indicate the existence of vibronic transitions caused by the internal aggregation of the P3HT chains inside the nanoparticles.[1,2] The acquired aggregate structure with its electronic transitions of the P3HT (NPs) in dispersion is maintained when deposited in the form of films onto substrates.-- S2. Redox charge density & thickness: Figure S2 shows the cyclic voltammograms of the different P3HT film probed for different film thicknesses at a scan rate of 20 mV/s in the potential window from -0.3 to 1.1 V vs. Ag/AgCl reference electrode (RE), calibrated at 0.45 V vs. ferrocene. The surface area exposed to the electrolyte is about 1 cm2.-- S3. Stationary Transmittance: Figure S4 show the stationary transmittance curves of the P3HT film series taken at 520 nm in the oxidized and neutral state as a function of the calculated redox charge densities. Experimental data points are fitted by exponential decay functions. The P3HT film series show similar transmittance curves in the oxidized state (Figure S3A), while those in the neutral state (Figure S3B) exhibit larger deviations. The difference between transmittance values in the oxidized and neutral state then provides the contrast curve as a function of the redox charge density as shown in Figure 2 of the main manuscript.--, S4. Transmittance spectra: Figure S4 shows the transmittance spectra of P3HT-THF film acquired in its neutral and oxidized states, reflecting its magenta and transparent pale blue colors, respectively. The transmittance minimum is obtained at 520 nm for the neutral state and provides the reference value at which maximum contrast, i.e. transmittance differences between the oxidized and neutral state is calculated for the different P3HT film series.-- S5. Switching speed: The switching speed of the P3HT films has been determined following the experimental procedure described in the experimental section of the main manuscript. Here the films are submitted to potential steps of variable pulse lengths of 15, 10, 5, 2, 1, 0.5 and 0.25 s between -0.3 and 1.1 V. A representative case study for a P3HT-THF film is depicted in Figure S5.-- S6. Cycling stability: The cycling stability of the P3HT films has been determined following the experimental procedure described in the experimental section of the main manuscript. Here the films are submitted to a number of potential steps between -0.3 and 1.1 V: 300 cycles of 10 s for each step were applied. A representative case study for a P3HT-THF film is depicted in Figure S6.-- S7. Spin-coated P3HT-CHCl3 film: Spin-coating of non-nanostructured P3HT-CHCl3 dispersions, provides a continuous film coverage of the ITO substrate, as can be seen by SEM (Figure S7A) and the profilometry curve of a representative film with average film thickness of 77 nm (Figure S7B). Therefore, the electrochromic transmittance and contrast behavior at 520 nm (Figure S7C) now shows more consistent results, comparable to those of the spray-coated films of the other P3HT series. This especially refers to the optimum redox charge density and maximum contrast being achieved. Equally, t90 switching speed (Figure S7D), as well as the cycling stability (Figure S7E) in the optimum redox window reveal a behavior close to the ones of the other spray-coated film series. However, the spin-coated P3HT-CHCl3 film is prone to delamination issues (Figure S7F), compromising the mechanical integrity of the film, and thus as well the contact to the underlying substrate. This results in the non-linear enhancement of the t90 switching and the decrease of the cycle stability, beyond the established optimum redox charge densities window, as can be seen in Figure S7D and S7E, respectively. The overall electrochromic performance parameters for the spin-coated P3HT-CHCl3 series are summarized in Table S1., This work was funded by Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación (MCIN-AEI, Spain) under Grant numbers PID2019-104272RB-C55/AEI/10.13039/501100011033, PID2019-104272RB-C51/AEI/10.13039/501100011033 and TED2021-129609B-I00/MCIN/AEI/10.13039/501100011033 (co-funded by European Union NextGenerationEU/PRTR). A.C-S acknowledges financial support from UPCT-Banco Santander through a research grant (“Iniciación en investigacion” Program 2021). W.M. and A.M.B acknowledge financial support from Gobierno de Aragon (DGA) under project “Grupos de Investigación Reconocidos” T03_23R. E.C. is grateful for his PhD grant from MINECO (FPI BES2017-080020) and associated European Social Funds (ESF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The aqueous processing of carbon nanofibers via cellulose nanocrystals as a green path towards e-textiles with n-type thermoelectric behaviour

  • Calvo Peña, Víctor
  • Paleo, A. J.
  • González Domínguez, José Miguel
  • Muñoz, Edgar
  • Krause, Beate
  • Pötschke, Petra
  • Maser, Wolfgang K.
  • Benito, Ana M.
9 figures, 2 tables.-- Supplementary information available., Cellulose nanocrystals (CNCs) are a nanostructured biopolymer with unique properties, such as high strength and water stability. These properties make CNCs ideal for diverse applications, including dispersing agents for hydrophobic carbon nanomaterials in water. Specifically, carbon nanomaterials can be integrated into textiles to produce flexible electronic wearables with excellent performance. However, the necessary prerequisite of achieving stable liquid dispersions of these carbon nanomaterials, such as nanofibers (CNFs) typically involves the use of organic solvents or high concentrations of hazardous surfactants in water. Thus, in this study, for the first time, CNCs were successfully used to prepare CNFs aqueous dispersions, referred to as inks, at CNF concentrations up to 0.7 g L−1. As a proof of principle, these inks were then integrated into a cotton fabric using a facile dip coating and drying strategy, resulting in an e-textile with a negative Seebeck coefficient. Furthermore, a theoretical model was developed to describe the nonlinear Seebeck coefficient of the nanocomposite textile, shedding light on the physics governing the electrical conductivity and Seebeck coefficient over a temperature range from 30 °C to 100 °C. These promising results pave the way towards the development of environmentally friendly and durable CNF aqueous dispersions and wearable e-textiles., Financial support from Spanish MCIN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2020-120439RA-I00, from Spanish CSIC (PIE iniciación ref. 202280I007), as well as from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_23R) is acknowledged. Vícto Calvo thanks the DGA for funding his PhD contract (Ref. CUS/581/2020). Antonio J. Paleo gratefully acknowledges support from FCT-Foundation for Science and Technology by the “plurianual” 2020–2023 Project UIDB/00264/2020, and European COST Action EsSENce CA19118 for its support with the Short Term Scientific Mission (STSM) grant E-COST-GRANT-CA19118-0ed3a197 at IPF (Dresden). E. Muñoz acknowledges funding from ANID ANILLO ACT/192023 and Fondecyt No 1230440., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Appendix A. Supplementary data for The aqueous processing of carbon nanofibers via cellulose nanocrystals as a green path towards e-textiles with n-type thermoelectric behaviour [Dataset]

  • Calvo Peña, Víctor
  • Paleo, A. J.
  • González Domínguez, José Miguel
  • Muñoz, Edgar
  • Krause, Beate
  • Pötschke, Petra
  • Maser, Wolfgang K.
  • Benito, Ana M.
Under a Creative Commons license BY-NC-ND 4.0 Deed., Synthesis of cellulose nanocrystals: Cellulose nanocrystals (CNCs) were synthesized following the protocol described in two previous publications.[1,2] 10 g of microcrystalline cellulose (MCC) (Sigma-Aldrich, ref 310697) were dispersed in 45 ml of ultrapure water using an ultrasound bath (45 kHz) for 5 min. Then, 45 ml of H2SO4 98 wt% (Labkem, ref SUAC-00A) were added dropwise to the mixture (externally cooled in an ice/water bath at 0 °C) reaching a final H2SO4 concentration of 64 wt%. This addition was performed fast (less than 5 min) and with magnetic stirring to obtain type I CNCs or slow (longer than 100 min) and with high shear mixing to obtain type II CNCs.[1] After that, the mixture was put in a heating plate at 70°C for 10 minutes for type I CNCs or at ambient temperature for 1 hour for type II CNCs. The reaction was stopped by diluting in 1 liter of ultrapure water at 4°C, also to increase the pH, and the mixture was left decanting overnight at 4°C. The bottom sediment was dialyzed against ultrapure water until a neutral pH was achieved, using specific dialysis membranes (Merck, average flat width 33 mm, ref D9652-100FT). The neutralized dispersions were subjected to centrifugation/re-dispersion cycles at 9000 rpm (9327 rcf) for 1 min to keep only the nanocrystals. The average mass yield and the concentration (Table S1) were determined by lyophilization of 3 aliquots of 30 mL of the CNCs dispersions. The hydrodynamic radii, polydispersity, and ζ-potential were measured using a Malvern Nano ZS instrument, and the mean values of these parameters are presented in Table S1. The CNCs in solid were measured by a Bruker D8 Advance X-Ray diffractometer using a Cu tube as the X-ray source (λ Cu Kα = 1.54 Å), a tube voltage of 40 kV, and a current of 40 mA. The X-Ray diffraction patterns of the prepared CNCs (Fig. S1) confirmed the different presence of the characteristic planes of type I or type II cellulose.--, Synthesis of cellulose nanocrystals: Table S1. Mean values of the characterization results of type I and type II CNCs dispersions. Fig. S1. X-ray diffraction profiles of type I (red) and type II (blue) CNCs. Surface resistivity of n-type thermoelectric cotton textiles as a function of the number of dip-coating cycles: Fig. S2. Surface resistivity (Rsh) of nanocomposite textiles from 1 to 10 immersion cycles with equivalent inks, but different immersion methodology: regular (red) and using a complementary ultrasounds bath treatment for 5 min (black). Measured with an in-line 4-point probe configuration. Error bars show standard deviation of at least 3 repetitions. SEM images of the surface of original and washed CWF@CNF textile samples: Fig. S3. SEM images of the surface of original and washed CWF@CNF textile samples at different magnifications (a) CWF@CNF, (b) CWF@CNF W30 and (c) CWF@CNF W45. Model proposed for describing the nonlinear Seebeck of CNFs and CWF@CNF: The model presented in this work represents the combination of two physical mechanisms occurring in parallel: S(T)=S_met (T)+S_imp (T) (1). Power factor and estimative figure of merit of unwashed and washed samples and CNFs: Table S2. Thermoelectrical properties of dip-coated textiles and carbon nanofibers. References., Financial support from Spanish MCIN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2020-120439RA-I00, from Spanish CSIC (PIE iniciación ref. 202280I007), as well as from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_23R) is acknowledged. Vícto Calvo thanks the DGA for funding his PhD contract (Ref. CUS/581/2020). Antonio J. Paleo gratefully acknowledges support from FCT-Foundation for Science and Technology by the “plurianual” 2020–2023 Project UIDB/00264/2020, and European COST Action EsSENce CA19118 for its support with the Short Term Scientific Mission (STSM) grant E-COST-GRANT-CA19118-0ed3a197 at IPF (Dresden). E. Muñoz acknowledges funding from ANID ANILLO ACT/192023 and Fondecyt No 1230440., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Metal-free dyes with deep HOMO level for TiO2 sensitization

  • Ansón-Casaos, Alejandro
  • Orduna, Jesús
  • Martínez-Barón, Carlos
  • Blanco Cambronero, Aitana
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Blesa, María Jesús
Work presented at the XI Franco-Spanish Workshop IBERNAM-CMC2 – 9-10th November 2023, Zaragoza (Spain)., Photoelectrochemical (PEC) water splitting is being intensively studied as a method for green hydrogen production and artificial photosynthesis. Specifically, titanium dioxide (TiO2) nanoparticles show remarkable properties as a photocatalyst and for the preparation of nanostructured photoanodes. However, as a wide bandgap semiconductor, TiO2 is only active under UV irradiation, and sensitization with organic dyes would be a convenient strategy to improve its solar conversion efficiency. In our previous work, we studied the sensitization of the TiO2 electrode through the adsorption of a metal-free donor-π-acceptor (D-π-A) dye molecule (AT-Pyri) [1]. The AT-Pyri molecule consists of an aniline donor, thiophene π-spacer, and a pyrimidine unit as the acceptor part. We showed that the AT-Pyri/TiO2 electrode was in fact active for water splitting under a wide range of visible light wavelengths, up to 600 nm. However, the system visibly degraded during transient photocurrent measurements under potentiostatic conditions in the Na2SO4 aqueous electrolyte. As a possible source of instability, we considered the oxidation potential (Eox) of AT-Pyri, which was determined to be +0.88 V vs. SHE, thus above the O2/H2O reduction potential. In this work, we evaluate the energy levels of two alternative dye molecules by means of DFT theoretical calculations. In terms of the chemical structure, we follow a simplification strategy, resulting in π-A type molecules. We select the bithiophene ring as the π-spacer, and either cyanoacetic acid (-CNCOOH) or pyrimidine (Pyri) as the acceptor and anchoring group (Figure 1). Both dyes fulfil theoretical requirements to become TiO2 sensitizers in a water splitting process, with Eox > EO2/H2O (Table 1). Next, we perform the laboratory synthesis and characterization of both dyes, which show yellowish colors. Nanostructured TiO2 electrodes on FTO/glass substrates are prepared by screen printing, and dye adsorption is successfully accomplished by immersion of TiO2 electrodes in CH2Cl2 solutions. However, the TT-CNCOOH dye desorbs from the TiO2 support and is solubilized when the electrode is put in contact with electrolytic Na2SO4 and phosphate buffer solutions, so it is not used for PEC studies. The complete PEC characterization of the TT-Pyri/TiO2 electrode is performed in a 3-electrode cell with aqueous Na2SO4 electrolyte, and under simulated solar light irradiation. The electrode is stable under cyclic voltammetry conditions between -0.5 and 0.4 V vs. Ag/AgCl. Moreover, the electrode keeps its yellow color after a 5 min photocurrent measurement under light irradiation periods of 15 s and a constant potential of 0 V vs. Ag/AgCl. The photocurrent is multiplied by 1.6 and 12.5 In the presence of glycerol and triethanolamine as sacrificial agents, respectively. The dye sensitization effect was also proved by experiments using a monochromator. However, as it is observed after a continuous photocurrent measurement for 2 h, the long-time stability is still hindered by a slow unknown degradative mechanism, which requires further investigation, Financial support from Spanish MICINN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2019-104272RB-C51, PID2022-139671OB-I00 and PID2019-104307GB-I00, and the Gobierno de Aragón (DGA) under projects T03_23R and E47_23R (Grupos de Investigación Reconocidos) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cobalto atómicamente disperso en carbón poroso dopado con nitrógeno a partir de la cabonización de ZIF-8 para la ORR

  • Hernández-Ferrer, Javier
  • Gracia Martín, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
1 figura.- Abstract del póster de Tecnologías para la generación sostenible de energía presentada en la XVI Reunión del Grupo Español del Carbón (Reunión GEC 2023), celebrada en Gijón del 22 al 25 de octubre de 2023., La reducción electroquímica de oxigeno es una reacción de gran importancia para la transición energética ya que está en la base de las pilas de combustible y las baterías de aire. El reto que existe actualmente es aumentar la actividad másica a la vez que evitar o reducir el uso de metales nobles. Especies del tipo metal transición-N-C, que imitan ftalocianinas se han demostrado como una buena alternativa para obtener una alta actividad másica [1] [10]. Estas especias se podrían preparar por la carbonización controlada de MOFs ya que estos contienen tanto metales como nitrógenos atómicamente dispersos. Algunos trabajos pioneros carbonizaron ZIF-67 ) [16] or ZIF-8 [17] con metales. En estos trabajos se realizó un lavado ácido para eliminar las nanopartículas formadas, pero aun así quedaban nanopartículas encapsuladas reduciendo la actividad másica en la ORR. En este trabajo hemos carbonizado ZIF8 con y sin impregnación de 0.9 wt% Co y lo hemos carbonizado a tres temperaturas diferentes, 700 ºC, 900 ºC y 1000 ºC. Los carbones dopados con nitrógeno se han caracterizado exhaustivamente y se han probado en la ORR tanto en medio neutro como básico. De esa manera ha sido posible poner algo de luz el efecto de la temperatura de carbonización y en el efecto de la presencia de Co en las propiedades de los materiales carbonosos y en su comportamiento electrocatalítico en la ORR., Proyectos PID2020-119160RB-C21 y PID2019-104272RB-C51 financiados por gobierno de Aragón (Aragón T03_20R) y MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metal-free nanostructured-carbon inks for a sustainable fabrication of zinc/air batteries: From ORR activity to a simple prototype

  • Santos, Florencio
  • Lorca, Sebastián
  • González Martínez, Juan F.
  • Urbina, Antonio
  • Álvarez Sánchez, Miguel Ángel
  • González Domínguez, José Miguel
  • García-Bordejé, José Enrique
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Fernández Romero, Antonio J.
5 figures, 1 table.-- Under a Creative Commons license CC-BY 4.0., Zinc/air batteries are convenient energy storage devices for both small and massive applications. While future perspectives indicate the need for low-cost components and sustainable fabrication processes, the battery performance is in part controlled by the kinetics of the oxygen reduction reaction (ORR), which typically involves transition metals as catalysts. In this context, we prepare a series of metal-free water-based carbon inks, which are tested for their catalytic performance, once deposited on a gas-diffusion substrate, in the air cathode of a simple battery prototype. The inks contain a variety of well-defined carbon nanomaterials and additives, exhibiting different physicochemical properties that critically influence the interaction with the gas diffusion hydrophobic substrate. The intrinsic ORR catalytic activity of the ink material is also analyzed on a glassy carbon electrode by the rotating ring-disc electrode (RRDE) method and specific capacitance measurements. The discharge capacity on our zinc/air battery prototype correlates well with the intrinsic catalytic activity in the RRDE. However, only the activity in the RRDE does not actually assure the performance on the commercial cathode of the prototype, since other chemical compatibility issues play a role. Thus, we highlight the importance of catalyst testing, not only on the RRDE but also under realistic device conditions., This study received financial support from Spanish MICINN under projects PID2019-104272RB-C51, C55AEI/10.13039/501100011033, PID2020-120439-RA-I00, Diputación General de Aragón under project T03_23R (Grupo Reconocido), and Fundación Séneca (Región de Murcia, Spain; Reference: 20985/PI/18). The authors also appreciate the financial support provided by the MICINN and the European Union “NextGenerationEU/PRTR” through the project TED2021–130334B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metal-Free counter electrodes for DSSCs based on nitrogen-doped reduced graphene oxide materials

  • Duerto, Isolda
  • Carrera, Clara
  • Barrios, Daniel
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Villacampa, Belén
  • García-Bordejé, José Enrique
  • Blesa, María Jesús
This article belongs to the Special Issue Recent Progress on Functional Dyes and Their Applications., The importance of counter electrodes in Dye Sensitized Solar Cells (DSSCs) cannot be neglected as they enable the transfer of electrons across the outer circuit, thereby facilitating the reduction reaction of the I3−/I− redox electrolyte. However, the dissolution and deposition of the usual platinum layer on the counter electrode has resulted in contamination concerns. To address this issue, metal-free counter electrodes made of reduced graphene oxide (rGO) aerogels were developed and their catalytic performance towards I3− reduction was evaluated. The reduced graphene materials were characterized, and the fitting analysis of XPS revealed the presence of various nitrogen species, with the primary peaks attributed to pyridinic and pyrrolic nitrogen. The hydrothermal treatment of graphene oxide (GO) resulted in a higher graphitic character and the intensification of the contacts between graphene nanosheets, which should entail higher electrical conductivity, both in-plane and between rGO sheets. Additionally, the presence of nitrogen-provided active sites promoted the catalytic reduction of the electrolyte. Encouragingly, good charge transfer rates were observed between the counter electrode and the electrolyte in the assembled DSSCs, resulting in good photocurrents and exceptional stability over the course of nearly 1200 h after cell assembly. The results obtained suggest that these GO-based systems are promising candidates for developing metal-free counter electrodes for DSSC, supporting the interest of further study., We gratefully acknowledge financial support from the Spanish Ministry of Science and Innovation (MICINN) and the Spanish Research Agency (AEI) under projects: PID2019-104307GB-I00/AEI/10.13039/501100011033; PID2019-104272RB-C51/AEI/10.13039/501100011033 and Gobierno de Aragón-Fondo Social Europeo (E47_23R, T03_23R). I.D. and D.B. acknowledge the financial support of the Gobierno de Aragón-Fondo Social Europeo fellowship and PhD studentship Santander-2018 programs, respectively. Finally, C.C. is grateful for her PhD grant from Gobierno de Aragón (DGA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Carbon nanomaterials-based inks and electrodes using chitin nanocrystals

  • Calvo Peña, Víctor
  • Martínez-Barón, Carlos
  • Vázquez Conejo, Benjamín
  • Domínguez Alfaro, Antonio
  • Paleo, A. J.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
5 figures, 2 tables., Dispersing 1D carbon nanomaterials (CNMs) for film processing traditionally relies on surfactants or organic solvents. These methods, however, raise environmental concerns and can negatively impact the final properties of the CNMs. In this work we demonstrate that chitin nanocrystals (ChNCs) synthesized via acid hydrolysis provide a greener pathway for the development of waterborne CNMs-based inks, including single-walled carbon nanotubes, multiwalled carbon nanotubes, and carbon nanofibers. Various concentrations of ChNCs were mixed with each type of CNM to maximize the CNM concentration within the ink. In-depth characterization of the CNM/ChNC inks preceded their processing into supported conductive films by spray-coating. A subsequent thermal treatment of ChNCs at 450 °C leads to the efficient removal of ChNC and results in a significant enhancement of the electrical conductivity. Moreover, freeing the CNMs network structure contributes to increased electrochemical performance of the treated films, as expressed by improved Faradaic charge transfer efficiencies and kinetics reflected by 1 order of magnitude reduced rate constants, when tested with various redox probes. Our findings highlight the potential of ChNCs as a sustainable processing adjuvant of CNMs, leading to electrically conductive electrodes with suitable electrochemical properties for their use in diverse devices and applications., Financial support from Spanish MCINN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” by the European Union under project grants PID2019-104272RB-C51, PID2020-120439RA-I00, and PID2022-139671OB-I00 as well from Spanish CSIC (PIE iniciación ref 202280I007) and from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_23R and E47_23R) are acknowledged. V.C. and C.M.-B. thank the DGA for funding their PhD contracts (ref. CUS/581/2020 and CUS/621/2023). A.J.P. gratefully acknowledges support from the FCT-Foundation for Science and Technology by the 2020–2023 Project UIDB/00264/2020. A.D.A. acknowledges UPV/EHU for funding transferred by the European Union-Next Generation EU by the Margarita Salas fellowship (MARSA N° agreement 22/77)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Effect of post activation treatment and presence of minor amount of metal on nitrogen-doped carbon materials derived from laser-assisted pyrolysis for oxygen reduction reaction

  • Pakrieva, Ekaterina
  • Hernández-Ferrer, Javier
  • Martínez, Gema
  • Balas, Francisco
  • Hueso, José L.
  • García-Bordejé, José Enrique
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Santamaría, Jesús
Trabajo presentado a las XXXVII Jornadas Nacionales de Ingeniería Química: El puente hacía un futuro sostenible, celebradas en Castellón del 13 al 15 de septiembre de 2023.-- Temática: Energía y Sostenibilidad., The authors thank the Spanish Ministry of Science and Innovation (LAERTES project) and the European Commission (ERC-Advanced Grant CADENCE) for funding. The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit of the CIBER in BioEngineering, Biomaterials & Nanomedicine (CIBERBBN). The characterization has been carried out in the ELECMI-ICTS facilities. Financial support from Diputación General de Aragón under project T03_23R (Grupo Reconocido), Projects PID 2020-119160RB-C21 and PID2019-104272RB-C51 funded by MCIN/AEI/10.13039/501100011033 are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Sustainable fabrication of carbon nanotube electrodes based on chitin nanocrystals: unraveling Faradaic charge transfer phenomena

  • Calvo Peña, Víctor
  • Martínez-Barón, Carlos
  • Vázquez Conejo, Benjamín
  • Domínguez Alfaro, Antonio
  • Paleo, Antonio J.
  • Ansón-Casaos, Alejandro
  • González Domínguez, José Miguel
  • Maser, Wolfgang K.
  • Benito, Ana M.
Work presented at the XXV Meeting of The Portuguese Electrochemical Society (SPE2023), 30th august-1st september 2023, Coimbra (Portugal), The use of carbon nanomaterials is widespread in the scientific community due to their excellent optoelectronic and mechanical properties. In particular, carbon nanotubes (CNTs) are typically employed in electrochemical devices for different purposes, ranging from sensing to energy storage applications [1]. An effective way to transfer CNT properties from the nano- to the microscale level is by preparing CNTs-based films [1 – 3]. Commonly, CNTs are dispersed in organic solvents or water by means of surfactants, which can be detrimental for the final application. Aiming to develop sustainable CNT electrodes, chitin nanocrystals (ChNCs) emerge as a promising adjuvant towards the fabrication of waterborne environmentally-friendly CNTs inks. The present work demonstrates the feasibility of ChNCs to render stable aqueous inks of CNTs. These inks were subsequently employed for the preparation of film electrodes over glass substrates by means of spray coating. Once deposited, thickness and surface morphology of the CNT conductive films were evaluated, unraveling remarkable electrical conductivities ranging from 4.1 to 9.5 (S·cm-1). Furthermore, electrochemical measurements of the CNTs/ChNCs electrodes were carried out in a three-electrode cell. Faradaic transfer properties were evaluated using three different redox probes: ferricyanide, ascorbic acid and hydroquinone. For instance, cyclic voltammograms using the ferricyanide probe revealed enhanced charge transfer phenomena when thermally treating both CNTs/ChNCs electrodes in inert atmosphere. This fact has been supported by the standard electrochemical rate constant (k0), which decreased one order of magnitude in both cases after the thermal treatment, having a k0 of 4.1·10-5 for SWCNTs and 3.6·10-4 (cm·s-1) for MWCNTs. These values are in the range of other electrode materials [3, 4], revealing the potential of the herein shown approach., Spanish MICINN/AEI (PID2019-104272RB-C51/AEI/10.13039/501100011033, PID2020-120439RA-I00), Spanish CSIC (PIE iniciación, ref. 202280I007), Gobierno de Aragón (DGA- T03_23R and CUS/581/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Caracterización de un recubrimiento de grafeno en un fotoánodo de TiO2 sensibilizado con un nuevo colorante de tipo D-pi-A

  • Ansón-Casaos, Alejandro
  • Angoy, Sergio
  • Colom, E.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Blesa, María Jesús
Póster presentado en la XV Reunión del Grupo Español del Carbón, celebrada del 24 al 27 de abril de 2022 en Granada (España)., Proyectos financiados por el MICINN y la AEI (PID2019-104272-RB-C51/AEI/10.13039/501100011033 y PID2019-104307GB-I00/AEI/10.13039/501100011033) y el Gobierno de Aragón (Grupo Reconocido T03-20R y E47-20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Supporting information for Carbon nanomaterials-based inks and electrodes using chitin nanocrystals [Dataset]

  • Calvo Peña, Víctor
  • Martínez-Barón, Carlos
  • Vázquez Conejo, Benjamín
  • Domínguez Alfaro, Antonio
  • Paleo, A. J.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
Under a Creative Commons BY 4.0 license., Additional experimental details, including the surface conditioning of CNMs and the characterization of CNMs and ChNCs along with their combinations, further information about the different CNM/ChNC inks behavior and their subsequent films, and calculations regarding the CNM concentration as well as the electrical conductivity and the standard electrochemical constant, 1. Surface conditioning of CNMs and characterization...........................................S3 2. Calculation of the CNMs concentration post centrifugation ..............................S6 3. Dynamic light scattering results of fresh and redispersed ChNCs.........................S7 4. Morphological characterization of ChNCs................................................................S8 5. Sheet resistance results of the SWCNT/ChNC films..........................................S10 6. Characterization of the CNM/ChNC dispersions...............................................S11 7. Purity index of SWCNT/ChNC dispersions ........................................................S13 8. Homocoagulation analysis of SWCNT/ChNC and MWCNT/ChNC dispersions..S15 9. Sheet resistance results of the CNM/ChNC films..............................................S16 10. SEM images of the CNM/ChNC films ................................................................S17 11. Calculation of the CNM/ChNC films electrical conductivity..............................S18 12. XPS measurements of the CNM/ChNC films..........................................................S19 13. Contact angle measurements of the CNM/ChNC films ....................................S22 14. Calculation of the standard electrochemical rate constant..............................S23 15. References ........................................................................................................S25, Financial support from Spanish MCINN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” by the European Union under project grants PID2019-104272RB-C51, PID2020-120439RA-I00, and PID2022-139671OB-I00 as well from Spanish CSIC (PIE iniciación ref 202280I007) and from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_23R and E47_23R) are acknowledged. V.C. and C.M.-B. thank the DGA for funding their PhD contracts (ref. CUS/581/2020 and CUS/621/2023). A.J.P. gratefully acknowledges support from the FCT-Foundation for Science and Technology by the 2020–2023 Project UIDB/00264/2020. A.D.A. acknowledges UPV/EHU for funding transferred by the European Union-Next Generation EU by the Margarita Salas fellowship (MARSA N° agreement 22/77)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanoscale Charge Density and Dynamics in Graphene Oxide

  • Palacios-Lidón, E.
  • Colchero, J.
  • Ortuno, M.
  • Colom, E.
  • Benito, A.M.
  • Maser, W.K.
  • Somoza, A.M.
Graphene oxide (GO) is widely used as a component in thin film optoelectronic device structures for practical reasons because its electronic and optical properties can be controlled. Progress critically depends on elucidating the nanoscale electronic structure of GO. However, direct experimental access is challenging because of its disordered and nonconductive character. Here, we quantitatively mapped the nanoscopic charge distribution and charge dynamics of an individual GO sheet by using Kelvin probe force microscopy (KPFM). Charge domains are identified, presenting important charge interactions below distances of 20 nm. Charge dynamics with very long relaxation times of at least several hours and a logarithmic decay of the time correlation function are in excellent agreement with Monte Carlo simulations, revealing an universal hopping transport mechanism best described by Efros-Shklovskii''s law. © 2021 The Authors. Published by American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Explosive percolation yields highly-conductive polymer nanocomposites

  • Meloni, M.
  • Large, M. J.
  • González Domínguez, J. M.
  • Victor-Román, S.
  • Fratta, G.
  • Istif, E.
  • Tomes, O.
  • Salvage, J. P.
  • Ewels, C. P.
  • Peláez-Fernandez, M.
  • Arenal, R.
  • Benito, A.
  • Maser, W. K.
  • King, A. A. K.
  • Ajayan, P. M.
  • Ogilvie, S. P.
  • Dalton, A. B.
Explosive percolation is an experimentally-elusive phenomenon where network connectivity coincides with onset of an additional modification of the system; materials with correlated localisation of percolating particles and emergent conductive paths can realise sharp transitions and high conductivities characteristic of the explosively-grown network. Nanocomposites present a structurally- and chemically-varied playground to realise explosive percolation in practically-applicable systems but this is yet to be exploited by design. Herein, we demonstrate composites of graphene oxide and synthetic polymer latex which form segregated networks, leading to low percolation threshold and localisation of conductive pathways. In situ reduction of the graphene oxide at temperatures of <150 °C drives chemical modification of the polymer matrix to produce species with phenolic groups, which are known crosslinking agents. This leads to conductivities exceeding those of dense-packed networks of reduced graphene oxide, illustrating the potential of explosive percolation by design to realise low-loading composites with dramatically-enhanced electrical transport properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Graphene oxide: key to efficient charge extraction and suppression of polaronic transport in hybrids with poly (3-hexylthiophene) nanoparticles

  • Colom, E.
  • Hernández-Ferrer, J.
  • Galán-González, A.
  • Ansón-Casaos, A.
  • Navarro-Rodríguez, M.
  • Palacios-Lidón, E.
  • Colchero, J.
  • Padilla, J.
  • Urbina, A.
  • Arenal, R.
  • Benito, A.M.
  • Maser, W.K.
Nanoparticles (NPs) of conjugated polymers in intimate contact with sheets of graphene oxide (GO) constitute a promising class of water-dispersible nanohybrid materials of increased interest for the design of sustainable and improved optoelectronic thin-film devices, revealing properties exclusively pre-established upon their liquid-phase synthesis. In this context, we report for the first time the preparation of a P3HTNPs–GO nanohybrid employing a miniemulsion synthesis approach, whereby GO sheets dispersed in the aqueous phase serve as a surfactant. We show that this process uniquely favors a quinoid-like conformation of the P3HT chains of the resulting NPs well located onto individual GO sheets. The accompanied change in the electronic behavior of these P3HTNPs, consistently confirmed by the photoluminescence and Raman response of the hybrid in the liquid and solid states, respectively, as well as by the properties of the surface potential of isolated individual P3HTNPs–GO nano-objects, facilitates unprecedented charge transfer interactions between the two constituents. While the electrochemical performance of nanohybrid films is featured by fast charge transfer processes, compared to those taking place in pure P3HTNPs films, the loss of electrochromic effects in P3HTNPs–GO films additionally indicates the unusual suppression of polaronic charge transport processes typically encountered in P3HT. Thus, the established interface interactions in the P3HTNPs–GO hybrid enable a direct and highly efficient charge extraction channel via GO sheets. These findings are of relevance for the sustainable design of novel high-performance optoelectronic device structures based on water-dispersible conjugated polymer nanoparticles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Modelling TiO2 photoanodes for PEC water splitting: Decoupling the influence of intrinsic material properties and film thickness

  • Ansón-Casaos, A.
  • Ciria, J.C.
  • Martínez Barón, C.
  • Villacampa, B.
  • Benito, A.M.
  • Maser, W.K.
Semiconductor metal oxides are intensively studied in electrodes for photoelectrochemical (PEC) water splitting. On a series of nanoparticulate TiO2 photoanodes, we analyze specific fabrication variables by means of data fitting. First, the experimental outcome is gathered using PEC characterization techniques, mostly cyclic voltammetry and transient photocurrent measurements. Subsequently, we apply models to gain insights into the involved charge trapping and transfer phenomena. We find that capacitance coefficients and the switch-on transient kinetics depend on the TiO2 layer thickness, respectively indicating surface mechanisms and stationary regimes that are mediated by light accessibility. On the contrary, exponential factors of capacitance are independent of thickness, but reflect changes in the density of electron states with different sintering atmospheres. Also, the transfer resistance in the electrolyte side is indirectly influenced by sintering. Through meticulous quantitative analysis of trends, we stablish simple mathematical relationships that connect thickness-dependent parameters. This knowledge delves into fundamental mechanisms governing the TiO2 photoelectrode behaviour, and aims to facilitate further improvements in the efficiency of materials and electrodes for green hydrogen production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Oil-in-Water Pickering Emulsions Stabilized with Nanostructured Biopolymers: A Venue for Templating Bacterial Cellulose

  • Calvo, Víctor
  • Fuentes, Laura
  • Berdejo, Daniel
  • González-Domínguez, José M.
  • Maser, Wolfgang K.
  • Benito, Ana M.
Pickering emulsions (PEs) differ from conventional emulsions in the use of solid colloidal particles as stabilizing agents instead of traditional amphiphilic molecules. Nanostructured biopolymers (NBs) emerge as a promising alternative for PE stabilization owing to their remarkable biocompatibility, abundant availability, and low cost. To explore this potential, a study is herein presented, in which cellulose nanocrystals (CNCs), both type I and type II allomorphs, and chitin nanocrystals (ChNCs) were used for stabilizing oil-in-water PEs prepared by the use of ultrasound. Sunflower oil was selected as the oil phase as it offers the advantages of being edible, renewable, and inexpensive. By utilizing ζ-potential, static light diffraction, and visual observations, we determined the optimal oil/water ratio for each type of NB to obtain stable emulsions after 14 days. The optimized PEs were used to form bacterial nanocellulose composites through emulsion templating. To our knowledge, this study represents a pioneering work in exploiting oil-in-water PEs for this approach. Additionally, it entails the first utilization of nonmercerized type II CNCs as stabilizers for PEs, while also establishing a direct comparison among the most relevant NBs. The resulting composites exhibited a unique morphology, composed of larger pores compared to standard bacterial nanocellulose aerogels. These findings highlight the notable potential of NBs as stabilizers for PEs and their ability to generate green nanocomposites with tailored properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Formamidinium halide salts as precursors of carbon nitrides

  • Ciria-Ramos, Isabel
  • Navascués, Nuria
  • Diaw, Fatou
  • Furgeaud, Clarisse
  • Arenal, Raúl
  • Ansón-Casaos, Alejandro
  • Haro, Marta
  • Juarez-Perez, Emilio J.
Pyrolysis of formamidinium halide salts (FAI, FABr) results in a new type of amorphous carbon nitride materials with a mass fraction of 40–50% nitrogen content. Pyrolysis temperature drives final chemical composition, morphology, optical and electrical properties of the material independently of the halide precursor and identifying triazine ring, instead of typical heptazine unit, as the main building block of this material. We elaborated a temperature dependent mechanism of formation for these materials and foresee its potential value as native passivation layer in the field of perovskite solar cells. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Carbon nanomaterials-Based Inks and Electrodes Using Chitin Nanocrystals

  • Calvo, Víctor
  • Martínez-Barón, Carlos
  • Vázquez-Conejo, Benjamín
  • Domínguez-Alfaro, Antonio
  • Paleo, Antonio J.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González-Domínguez, José M.
Dispersing 1D carbon nanomaterials (CNMs) for film processing traditionally relies on surfactants or organic solvents. These methods, however, raise environmental concerns and can negatively impact the final properties of the CNMs. In this work we demonstrate that chitin nanocrystals (ChNCs) synthesized via acid hydrolysis provide a greener pathway for the development of waterborne CNMs-based inks, including single-walled carbon nanotubes, multiwalled carbon nanotubes, and carbon nanofibers. Various concentrations of ChNCs were mixed with each type of CNM to maximize the CNM concentration within the ink. In-depth characterization of the CNM/ChNC inks preceded their processing into supported conductive films by spray-coating. A subsequent thermal treatment of ChNCs at 450 °C leads to the efficient removal of ChNC and results in a significant enhancement of the electrical conductivity. Moreover, freeing the CNMs network structure contributes to increased electrochemical performance of the treated films, as expressed by improved Faradaic charge transfer efficiencies and kinetics reflected by 1 order of magnitude reduced rate constants, when tested with various redox probes. Our findings highlight the potential of ChNCs as a sustainable processing adjuvant of CNMs, leading to electrically conductive electrodes with suitable electrochemical properties for their use in diverse devices and applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Single-walled carbon nanotube buckypaper as support for highly permeable double layer polyamide/zeolitic imidazolate framework in nanofiltration processes

  • Berned-Samatán, V.
  • Rubio, C.
  • Galán-González, A.
  • Muñoz, E.
  • Benito, A. M.
  • Maser, W. K.
  • Coronas, J.
  • Téllez, C.
The development of membranes for nanofiltration applications requires not only selective layers but also suitable supports to control their synthesis as well as to enable efficient and competitive membrane performances. Single-walled carbon nanotube free-standing films (denoted as buckypaper) have been used as supports for the preparation of polyamide (PA) layers by interfacial polymerization (IP) and tested for dead-end nanofiltration for dyes removal (265–1017 Da) from water and organic solvents. The arrangement of the phases during the IP is essential, thus impregnation on the buckypaper support, first with the organic phase and then with the aqueous phase (denoted as inverse IP, iIP) leads to permeances (of up to 28.0 and 31.4 L m-2 h-1 bar-1 for water and methanol, respectively) and rejection values (>96%) that exceed those of the membranes prepared by reversing the impregnation order. Secondly, a double layer PA/zeolitic imidazolate framework (ZIF-8 or ZIF-93) was prepared on the buckypaper (bp). The design of this double layer led to superior membrane performance, in particular for the hydrophilic ZIF-93, as it changes the PA layer properties (increasing both hydrophilicity and surface roughness) providing higher permeances (up to 59.3 and 76.0 L m-2 h-1 bar-1 for water and methanol, respectively) and dye rejections (>98.5%) than the bare PA layer prepared by iIP. This attractive performance of the PA/ZIF-93/bp membrane has been corroborated with experiments in cross-flow nanofiltration and dead-end nanofiltration of aqueous salt solutions, long-term stability nanofiltration and the study the membrane separation performance after a chlorine treatment. The results reported here therefore show the enormous potential of these membrane architectures for a variety of selective separation processes. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Detailed thermal reduction analyses of graphene oxide via in-situ TEM/EELS studies

  • Pelaez-Fernandez, M.
  • Bermejo, A.
  • Benito, A.M.
  • Maser, W.K.
  • Arenal, R.
We report an in-depth study of the reduction of graphene oxide (GO) by in-situ thermal transmission electron microscopy (TEM) analysis. In-situ heating high-resolution TEM (HRTEM) imaging and electron energy-loss spectroscopy (EELS) measurements have been combined to identify the transformations of different oxygen functional groups, the desorption of physisorbed and chemisorbed water and the graphitisation as a function of the temperature in the range from 70 up to 1200 °C. A model for the general removal of water and OFGs is proposed based on different chemical and physical parameters that have been monitored. All this unique information provides a detailed roadmap of the thermal behaviour of GO at an extended range of temperature. This is not only of interest to understand the thermal reduction process of GO but also of critical relevance to the response of GO in applications when exposed to thermal effects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3d structures

  • González-Domínguez J.M.
  • Baigorri A.
  • Álvarez-Sánchez M.Á.
  • Colom E.
  • Villacampa B.
  • Ansón-Casaos A.
  • García-Bordejé E.
  • Benito A.M.
  • Maser W.K.
In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray-or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Rational description and modelling of the separation of nanotubes from solid nanoparticles in centrifugation processes

  • Ciria J.C.
  • Ansón-Casaos A.
  • Benito A.M.
  • Maser W.K.
Centrifugation of liquid dispersions is a typical technique being employed to separate single-walled carbon nanotubes (SWCNTs) from big aggregates and impurities. Shining light on the underlying mechanism contributes to a more efficient preparation of corresponding suspensions or inks with improved properties. In this work, we model the sedimentation process by applying fundamental equations and a mathematical algorithm for the centrifugation routine, which takes into account centrifugation parameters and the geometry of nanoparticles. The model is fed with experimental data, namely, the centrifugation mass yield, the SWCNT purity index, metal contents, and nanoparticle sizes measured for pristine, thermally-oxidized, and chemically functionalized SWCNT samples. Particle aggregation, including SWCNT bundling, and changes due to physicochemical pretreatments are taken into account. It is shown that the complete experimental data set can be quantitatively well understood in terms of the particle sedimentation coefficient. The proposed model thus provides a rational concept to optimize centrifugation protocols for the separation of mixtures containing nanoparticles of different shapes.
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes

  • Dortez Herranz, Silvia|||0000-0002-1999-5605
  • Sierra Gómez, Tania|||0000-0003-3019-2026
  • Álvarez Sánchez, Miguel A.
  • González Domínguez, José L.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Crevillen, Agustín G.
  • Escarpa Miguel, Jesús Alberto|||0000-0002-7302-0948
10 p., Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L?1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches., Comunidad de Madrid; Ministerio de Economía y Competitividad de España; CRUE-CSIC; Gobierno de Aragon, Comunidad de Madrid, Ministerio de Economía y Competitividad, Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, Gobierno de Aragón
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Metal-free nanostructured-carbon inks for a sustainable fabrication of zinc/air batteries: from ORR activity to a simple prototype

  • Santos, Florencio
  • Lorca, Sebastián
  • González-Martínez, Juan F.
  • Urbina Yeregui, Antonio
  • Álvarez-Sánchez, Miguel A.
  • González-Domínguez, José M.
  • García-Bordejé, Enrique
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Fernández Romero, Antonio J.
Zinc/air batteries are convenient energy storage devices for both small and massive applications. While future perspectives indicate the need for low-cost components and sustainable fabrication processes, the battery performance is in part controlled by the kinetics of the oxygen reduction reaction (ORR), which typically involves transition metals as catalysts. In this context, we prepare a series of metal-free water-based carbon inks, which are tested for their catalytic performance, once deposited on a gas-diffusion substrate, in the air cathode of a simple battery prototype. The inks contain a variety of well-defined carbon nanomaterials and additives, exhibiting different physicochemical properties that critically influence the interaction with the gas diffusion hydrophobic substrate. The intrinsic ORR catalytic activity of the ink material is also analyzed on a glassy carbon electrode by the rotating ring-disc electrode (RRDE) method and specific capacitance measurements. The discharge capacity on our zinc/air battery prototype correlates well with the intrinsic catalytic activity in the RRDE. However, only the activity in the RRDE does not actually assure the performance on the commercial cathode of the prototype, since other chemical compatibility issues play a role. Thus, we highlight the importance of catalyst testing, not only on the RRDE but also under realistic device conditions., Financial support from Spanish MICINN under projects PID2019-104272RB-C51-, C55-AEI/10.13039/501100011033, PID2020-120439-RA-I00, Diputación General de Aragón under project T03_20R (Grupo Reconocido) and Fundación Séneca (Región de Murcia, Spain; Ref: 20985/PI/18). The authors also appreciate the financial support provided by the MICINN and the European Union “NextGenerationEU/PRTR” through the project TED2021-130334B-I00
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Graphene oxide: key to efficient charge extraction and suppression of polaronic transport in hybrids with poly (3-hexylthiophene) nanoparticles

  • Colom, Eduardo
  • Hernández-Ferrer, Javier
  • Galán-González, Alejandro
  • Ansón-Casaos, Alejandro
  • Navarro-Rodríguez, Mario
  • Palacios-Lidón, Elisa
  • Colchero, Jaime
  • Padilla, Javier
  • Urbina Yeregui, Antonio
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
Nanoparticles (NPs) of conjugated polymers in intimate contact with sheets of graphene oxide (GO) constitute a promising class of water-dispersible nanohybrid materials of increased interest for the design of sustainable and improved optoelectronic thin-film devices, revealing properties exclusively pre-established upon their liquid-phase synthesis. In this context, we report for the first time the preparation of a P3HTNPs-GO nanohybrid employing a miniemulsion synthesis approach, whereby GO sheets dispersed in the aqueous phase serve as a surfactant. We show that this process uniquely favors a quinoid-like conformation of the P3HT chains of the resulting NPs well located onto individual GO sheets. The accompanied change in the electronic behavior of these P3HTNPs, consistently confirmed by the photoluminescence and Raman response of the hybrid in the liquid and solid states, respectively, as well as by the properties of the surface potential of isolated individual P3HTNPs-GO nano-objects, facilitates unprecedented charge transfer interactions between the two constituents. While the electrochemical performance of nanohybrid films is featured by fast charge transfer processes, compared to those taking place in pure P3HTNPs films, the loss of electrochromic effects in P3HTNPs-GO films additionally indicates the unusual suppression of polaronic charge transport processes typically encountered in P3HT. Thus, the established interface interactions in the P3HTNPs-GO hybrid enable a direct and highly efficient charge extraction channel via GO sheets. These findings are of relevance for the sustainable design of novel high-performance optoelectronic device structures based on water-dispersible conjugated polymer nanoparticles., This work was funded by Spanish MCIN/AEI/10.13039/501100011033 under projects PID2019-104272RB-C51, PID2019-104272RB-C52, PID2019-104272RB-C55, and PID2019-104739GB-100. Financial support from Gobierno de Aragon (DGA) under project “Grupos Consolidados” T03_20R is acknowledged. E.C. is grateful for PhD grant BES2017-080020 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investingin your future”. M.N.R.’s work was financed by grant PID2019-104272RB-C52/PRE2020-094503 funded by MCIN/AEI/10.13039/501100011033 and by “‘ESF Investingin your future”’. R.A. acknowledge ssupport from EU H2020“ESTEEM3”(Grant number 823717)and Graphene Flagship (881603).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Nanoparticles of poly(3-hexylthiophene): toward a solvent-independent performance of electrochromic films

  • Cánovas-Saura, Antonio
  • Colom, Eduardo
  • Padilla, Javier
  • Urbina Yeregui, Antonio
  • Maser, Wolfgang K.
  • Benito, Ana M.
Nanoparticles of poly(3-hexylthiophene), P3HT(NP), uniquely enable the preparation of stable dispersions in environmentally-friendly media and thus offer a sustainable liquid phase fabrication of electrochromic device structures. In this work, we assess the electrochromic performance of P3HT(NP) films spray-coated from either tetrahydrofuran (THF)-water or chloroform (CHCl3)-ethanol dispersions on ITO substrates. The nanoparticle films exhibit consistent and reproducible high optical contrast values of around 50 %, t90-switching speeds of about 0.45 s and a cycling stability of approximately 200 cycles for a 20 % performance retention, independent of the solvent being used. Conversely, non-nanostructured P3HT films spray-coated from THF or CHCl3 reveal a strong solvent dependent variability in their electrochromic behavior presenting low optical contrast, high switching speeds and fast degradation rates in the case of CHCl3. The solvent independent electrochromic characteristics of P3HT nanoparticle films is related to a consistent availability of accessible electroactive sites provided by a homogeneous porous P3HT network structure formed on the underlying substrate, as probed by SEM and profilometric studies. Our findings reveal that the use of nanoparticles of P3HT and its environmentally benign liquid phase processing, a concept which is extendable to other electrochromic polymers, opens a sustainable pathway toward the large-area fabrication of electrochromic device structures with favorable and consistent performance parameters., This work was funded by Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación (MCIN-AEI, Spain) under Grant numbers PID2019-104272RB-C55/AEI/10.13039/501100011033, PID2019-104272RB-C51/AEI/10.13039/501100011033 and TED2021-129609B-I00/MCIN/AEI/10.13039/501100011033 (co-funded by European Union NextGenerationEU/PRTR). A.C-S acknowledges financial support from UPCT-Banco Santander through a research grant (“Iniciación en investigacion” Program 2021). W.M. and A.M.B acknowledge financial support from Gobierno de Aragon (DGA) under project “Grupos de Investigación Reconocidos” T03_23R. E.C. is grateful for his PhD grant from MINECO (FPI BES2017-080020) and associated European Social Funds (ESF).