Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 109
Encontrada(s) 2 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Generation of subnanometric platinum with high stability during transformation of a 2D zeolite into 3D

  • Liu, Lichen
  • Arenal, Raul
  • Agostini, Giovanni
  • Díaz, Urbano|||0000-0003-1472-8724
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Single metal atoms and metal clusters have attracted much attention thanks to their advantageous capabilities as heterogeneous catalysts. However, the generation of stable single atoms and clusters on a solid support is still challenging. Herein, we report a new strategy for the generation of single Pt atoms and Pt clusters with exceptionally high thermal stability, formed within purely siliceous MCM-22 during the growth of a two-dimensional zeolite into three dimensions. These subnanometric Pt species are stabilized by MCM-22, even after treatment in air up to 540 degrees C. Furthermore, these stable Pt species confined within internal framework cavities show size-selective catalysis for the hydrogenation of alkenes. High-temperature oxidation-reduction treatments result in the growth of encapsulated Pt species to small nanoparticles in the approximate size range of 1 to 2 nm. The stability and catalytic activity of encapsulated Pt species is also reflected in the dehydrogenation of propane to propylene., This work was funded by the Spanish Government (Consolider Ingenio 2010-MULTICAT (CSD2009-00050) and MAT2014-52085-C2-1-P) and by the Generalitat Valenciana (Prometeo). The Severo Ochoa Program (SEV-2012-0267) is gratefully acknowledged. L.L. thanks ITQ for a contract. The authors also thank the Microscopy Service of UPV for the TEM and STEM measurements. The HAADF-HRSTEM works were conducted in the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA)-Universidad de Zaragoza (Spain), a Spanish ICTS National Facility. Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3). R.A. also acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and the European Union Horizon 2020 research and innovation programme under the Marie Sldodowska-Curie grant agreement No. 642742.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrical conductivity of oxidized-graphenic nanoplatelets obtained from bamboo: effect of the oxygen content

  • Gross, K.
  • Sangiao, S.
  • Teresa, José María de
  • Arenal, Raúl
  • Prieto, Pilar
The large-scale production of graphene and reduced-graphene oxide (rGO) requires low-cost and eco-friendly synthesis methods. We employed a new, simple, cost-effective pyrolytic method to synthetize oxidized-graphenic nanoplatelets (OGNP) using bamboo pyroligneous acid (BPA) as a source. Thorough analyses via high-resolution transmission electron microscopy and electron energy-loss spectroscopy provides a complete structural and chemical description at the local scale of these samples. In particular, we found that at the highest carbonization temperature the OGNP-BPA are mainly in a sp bonding configuration (sp fraction of 87%). To determine the electrical properties of single nanoplatelets, these were contacted by Pt nanowires deposited through focused-ion-beam-induced deposition techniques. Increased conductivity by two orders of magnitude is observed as oxygen content decreases from 17% to 5%, reaching a value of 2.3 10 S m at the lowest oxygen content. Temperature-dependent conductivity reveals a semiconductor transport behavior, described by the Mott three-dimensional variable range hopping mechanism. From the localization length, we estimate a band-gap value of 0.22(2) eV for an oxygen content of 5%. This investigation demonstrates the great potential of the OGNP-BPA for technological applications, given that their structural and electrical behavior is similar to the highly reduced rGO sheets obtained by more sophisticated conventional synthesis methods., This work was supported by funds for internal calls for projects at Universidad del Valle CI71024, the Interdisciplinary Institute of Sciences at Universidad del Quindio and the Center of Excellence on Novel Materials at Universidad del Valle. Some of the research leading to these results received funding from the European Union Seventh Framework Program under Grant Agreement 312483—ESTEEM2 (Integrated Infrastructure Initiative—I3) and under Grant Agreement 604391 Graphene Flagship. RA also acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P), as well as from EU H2020 ETN project ‘Enabling Excellence’ Grant Agreement 642742. Acknowledgment to Aragon regional government for funding the E26 group is given., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene oxide-carbon nanotube hybrid assemblies: Cooperatively strengthened OH···O=C hydrogen bonds and removal of chemisorbed water

  • Núñez, Jesús David
  • Benito, Ana M.
  • Rouzière, Stéphan
  • Launois, Pascale
  • Arenal, Raúl
  • Ajayan, Pulickel M.
  • Maser, Wolfgang K.
6 Figuras, Owing to their great interest for energy storage and sensing applications, multi-layer papers consisting of graphene oxide – carbon nanotube (GO-CNT) hybrid sheets were prepared by in-situ exfoliation of graphite oxide in the presence of oxidized CNTs (oCNTs). For the first time we elucidate the influence of oCNTs on chemisorbed water (CW), i.e. water molecules inherently bound to oxygen functional groups (OFGs) of graphene oxide (GO) and responsible for irreversible structural damage upon thermal reduction processes. We show that oCNTs self-assemble onto GO sheets during the liquid phase processing steps by forming cooperatively strengthened OH···O=C hydrogen bonds between the carboxylic groups of oCNTs and OFGs of GO. At oCNT contents of about 10 to 15 wt. % this leads to the displacement of considerable amounts of CW without altering the original chemical composition of GO. Thermally reduced GO-CNT (rGO-CNT) papers reveal improved sp2 character and an enhancement of the specific capacitance by 75% with respect to thermally reduced GO (rGO), largely due to the effective removal of CW by oxidized CNTs. These findings disclose the relevance of cooperative hydrogen bonding phenomena in graphene oxide paper/film electrodes for the development of improved electrochemical energy storage and sensing devices., JDN is thankful for his CSIC PhD grant JAEPre09-01155 covering also his research stay at Rice University. WKM and AMB acknowledge financial support from Spanish MINECO and the European Regional Development Fund through project grants ENE2013-48816-C5-5-R, ENE2016-79282-C5-1-R and the Government of Aragon and the European Social Fund under project DGA-FSE-T66 CNN. RA gratefully acknowledges the support from MINECO through project grants FIS2013-46159- C3-3-P and MAT2016-79776-P. Some of the research has received funding from the European Union FP7 program under Grant Agreement 312483 ESTEEM2 (Integrated Infrastructure Initiative – I3) and from the European Union H2020 program under the grant 696656 Graphene Flagship, and H2020 Marie Skłodowska-Curie grant 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

NMR techniques for a structural characterization of fluorescent Carbon Dots

  • Vallan, Lorenzo
  • Benito, Ana M.
  • Urriolabeitia, Esteban P.
  • Maser, Wolfgang K.
Resumen del trabajo presentado a la 7ª Jornada de Jóvenes Investigadores (Química y Física) de Aragón, celebrada en la Universidad de Zaragoza el 24 de noviembre de 2016., Carbon Dots (CDs), since their discovery in 2004, are receiving considerable attention in the fields of optoelectronic devices, sensors and biological labelling. CDs are small carbon nanoparticles below the size of 10 nm that show a very strong photoluminescence emission. Compared to the semiconductor nanocrystals, which have raised serious health and environmental concerns, CDs present a safe, green and cheaper alternative, especially regarding the biomedical application. In fact CDs show good biocompatibility and an adequate functionalization of the surface enables the cellular uptake, opening the door to their use in optical imaging techniques and, with a further step, as drug carriers for therapeutic applications. In order to achieve these results, the comprehension of the CDs¿ chemical structure can be of great advantage, providing a starting point to understand which changes in the structure will affect the fluorescence behaviour and how. CDs can be synthetized starting from several oxygen-rich carbon sources, such us polysaccharides (top-down approach) or organic molecules (bottom-up approach). Among many different synthetic methods, pyrolysis, hydrothermal treatment and microwave irradiation offer an easy and suitable procedure to obtain CDs. In the current work nitrogen-doped CDs have been synthetized exploiting old and new synthetic approaches based on the condensation reactions of organic reagents. The as-prepared fluorescent CDs were characterized employing several powerful techniques for the structure determination, such as H1NMR, C13NMR, IR, XPS and Elemental Analysis., Financial support from EU under project MCSA-ITN-2014-ETN 642742 'Enabling Excellence' and DGA/FSE (T66-GCNN) is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-assembled core-shell CdTe/Poly(3-hexylthiophene) nanoensembles as novel donor−acceptor light-harvesting systems

  • Istif, Emin
  • Kagkoura, Antonia
  • Hernández-Ferrer, Javier
  • Stergiou, Anastasios
  • Skaltsas, Theodosis
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Tagmatarchis, Nikos
The self-assembly of novel core-shell nanoensembles consisting of regioregular poly(3-hexylthiophene) nanoparticles (P3HTNPs) of 100 nm as core and semiconducting CdTe quantum dots (CdTeQDs) as shell with a thickness of a few tens of nanometres was accomplished by employing a re-precipitation approach. The structure, morphology and composition of CdTeQDs/P3HTNPs nanoensembles were confirmed by high-resolution scanning transmission microscopy and dynamic light scattering studies. Intimate interface contact between the CdTeQDs shell and the P3HTNPs core leads to the stabilization of the CdTeQDs/P3HTNPs nanoensemble as probed by steady-state absorption spectroscopy. Effective quenching of the characteristic photoluminescence of CdTeQDs at 555 nm, accompanied by simultaneous increase of emission of P3HTNPs at 660 and 720 nm, reveals photoinduced charge-transfer processes. Probing the redox properties of films of CdTeQDs/P3HTNPs further proves the formation of a stabilized core-shell system in the solid-state. Photoelectrochemical assays on CdTeQDs/P3HTNPs films show a reversible on-off photoresponse at a bias voltage of +0.8 V with a three times increased photocurrent compared to CdTeQDs. The improved charge separation is directly related to the unique core-shell configuration, in which the outer CdTeQDs shell forces the P3HTNPs core to effectively act as electron acceptor. The creation of novel donor-acceptor core-shell hybrid materials via self-assembly is transferable to other types of conjugated polymers and semiconducting nanoparticles. This work, therefore, opens new pathways for the design of improved optoelectronic devices., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. AMB and WKM gratefully acknowledge financial support from Spanish MINECO under project ENE206-79282-C5-1-R and its associated European Regional Development Fund, as well as the Government of Aragon under project DGA-T66 and associated European Social Fund. RA gratefully acknowledges financial support from Spanish MINECO under project MAT2016 79776-P and its associated European Regional Development Fund, as well as the Government of Aragon under project DGA-E26 and associated European Social Fund. The STEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon Universidad de Zaragoza, Spain. The authors would like to thank Esteban Urriolabeitía for carrying out the NMR studies., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Generation of subnanometric platinum with high stability during transformation of a 2D zeolite into 3D

  • Liu, Lichen
  • Díaz Morales, Urbano
  • Arenal, Raúl
  • Agostini, Giovanni
  • Concepción, Patricia
  • Corma, Avelino
Single metal atoms and metal clusters have attracted much attention thanks to their advantageous capabilities as heterogeneous catalysts. However, the generation of stable single atoms and clusters on a solid support is still challenging. Herein, we report a new strategy for the generation of single Pt atoms and Pt clusters with exceptionally high thermal stability, formed within purely siliceous MCM-22 during the growth of a two-dimensional zeolite into three dimensions. These subnanometric Pt species are stabilized by MCM-22, even after treatment in air up to 540 °C. Furthermore, these stable Pt species confined within internal framework cavities show size-selective catalysis for the hydrogenation of alkenes. High-temperature oxidation-reduction treatments result in the growth of encapsulated Pt species to small nanoparticles in the approximate size range of 1 to 2 nm. The stability and catalytic activity of encapsulated Pt species is also reflected in the dehydrogenation of propane to propylene., This work was funded by the Spanish Government (Consolider Ingenio 2010-MULTICAT (CSD2009-00050) and MAT2014-52085-C2-1-P) and by the Generalitat Valenciana (Prometeo). The Severo Ochoa Program (SEV-2012-0267) is gratefully acknowledged. L.L. thanks ITQ for a contract. Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3). R.A. also acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and the European Union Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 642742., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Conjugated polymer nanoparticle-graphene oxide charge-transfer complexes

  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Stergiou, Anastasios
  • Tagmatarchis, Nikos
  • Fratta, Giuseppe
  • Large, Matthew J.
  • Dalton, Alan B.
  • Benito, Ana M.
  • Maser, Wolfgang K.
The game-changing role of graphene oxide (GO) in tuning the excitonic behavior of conjugated polymer nanoparticles is described for the first time. This is demonstrated by using poly(3-hexylthiophene) (P3HT) as a benchmark conjugated polymer and employing an in-situ re-precipitation approach resulting in P3HT nanoparticles (P3HTNPs) with sizes of 50 - 100 nm in intimate contact with GO. During the self-assembly process, GO changes the crystalline packing of P3HT chains in the forming P3HTNPs from H to H/J aggregates exhibiting exciton coupling constants as low as 2 meV, indicating favorable charge separation along the P3HT chains. Concomitantly, π-π interface interactions between the P3HTNPs and GO sheets are established resulting in the creation of P3HTNPs-GO charge-transfer complexes whose energy bandgaps are lowered by up to 0.5 eV. Moreover, their optoelectronic properties, pre-established in the liquid phase, are retained when processed into thin films from the stable aqueous dispersions, thus eliminating the critical dependency on external processing parameters. These results can be transferred to other types of conjugated polymers. Combined with the possibility of employing water based “green” processing technologies, charge-transfer complexes of conjugated polymer nanoparticles and GO open new pathways for the fabrication of improved optoelectronic thin film devices., This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 642742. AMB, and WKM acknowledge Spanish MINEICO (project ENE2016-79282-C5-1-R) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electron trap states and photopotential of nanocrystalline titanium dioxide electrodes filled with single-walled carbon nanotubes

  • Ansón-Casaos, Alejandro
  • Hernández-Ferrer, Javier
  • Rubio-Muñoz, Cristina
  • Santidrián, Ana
  • Martínez Fernández de Landa, María Teresa
  • Benito, Ana M.
  • Maser, Wolfgang K.
Hybrid film electrodes were made of nanocrystalline titanium dioxide (TiO2) and various percentages of single‐walled carbon nanotube (SWCNT) fillers up to 5.5 wt%. A complete photoelectrochemical study was performed in both alkaline and acidic conditions by using cyclic voltammetry, potentiostatic photocurrent measurements, and open‐circuit‐potential measurements under UV/Vis irradiation. Dark voltammograms show a transition from a capacitive to a resistive behavior in the TiO2 accumulation region upon increasing SWCNT percentages. In addition, the energy levels of deep electron traps change inside the TiO2 bandgap. The new peak positions correspond to the reduction potentials of SWCNTs, and their associated charge capacities increase with the SWCNT percentage. The modifications observed in dark experiments directly impact on the shape profile of cyclic voltammograms under irradiation. As a consequence, reduction potentials of SWCNTs appear near the cathodic peaks of certain water oxidation intermediates, and may be interacting with them. On the other hand, open‐circuit photopotentials reach maximum values for small SWCNTs percentages around 0.02 wt%. An increase in potentiodynamic and potentiostatic photocurrents is observed for the electrode containing 0.02 wt% SWCNTs, compared to reference TiO2 in acidic conditions., The authors thank the Institute for Biocomputation and Physics of Complex Systems (BIFI) for the centrifugation laboratory. This work has been funded by MINECO and European Regional Development Fund (ENE 2016-79282-C5-1-R), Government of Aragon and European Social Fund (DGA-ESF-T66 “Grupo Consolidado”) and European Commission (H2020-MSCA-ITN-2014-ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electronic interactions in illuminated carbon dots/MoS2 ensembles and electrocatalytic activity towards hydrogen evolution

  • Canton-Vitoria, Rubén
  • Vallan, Lorenzo
  • Urriolabeitia, Esteban P.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Tagmatarchis, Nikos
We report on the preparation, characterization and photophysical and electrocatalytic properties of carbon dots (CDs)/MoS2 ensembles. Based on electrostatic interactions, ammonium functionalized MoS2, prepared upon reaction of 1,2-dithiolane tertbutyl carbamate with MoS2 followed by acidic deprotection, was coupled with CDs bearing multiple carboxylates on their periphery as derived upon microwave-assisted polycondensation of citric acid and ethylenediamine followed by alkaline treatment. Insights into electronic interactions between the two species within CDs/MoS2 emanated from absorption and photoluminescence titration assays. Efficient fluorescence quenching of CDs by MoS2 was observed and attributed to photoinduced electron/energy transfer as the decay mechanism for the transduction of the singlet excited state of CDs. Finally, the electrocatalytic performance of CDs/MoS2 was assessed towards the hydrogen evolution reaction and found superior as compared to that owed to the individual CDs species., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Supramolecular-enhanced charge-transfer within entangled polyamide chains as the origin of the universal blue fluorescence of polymer carbon dots

  • Vallan, Lorenzo
  • Urriolabeitia, Esteban P.
  • Ruipérez, Fernando
  • Matxain, Jon M.
  • Canton-Vitoria, Rubén
  • Tagmatarchis, Nikos
  • Benito, Ana M.
  • Maser, Wolfgang K.
The emission of a bright blue fluorescence is a unique feature common to the vast variety of polymer carbon dots (CDs) prepared from carboxylic acid and amine precursors. However, the difficulty to assign a precise chemical structure to this class of CDs yet hampers the comprehension of their underlying luminescence principle. In this work, we show that highly blue fluorescent model types of CDs can be prepared from citric acid and ethylenediamine through low temperature synthesis routes. Facilitating controlled polycondensation processes, the CDs reveal sizes of 1 - 1.5 nm formed by a compact network of short polyamide chains of about ten monomer units. Density functional theory calculations of these model CDs uncover the existence of spatially separated highest occupied molecular orbital and lowest unoccupied molecular orbital located at the amide and carboxylic groups, respectively. Photoinduced charge-transfer between these groups thus constitutes the origin of the strong blue fluorescence emission. Hydrogen-bond mediated supramolecular interactions between the polyamide chains enabling a rigid network structure further contribute to the enhancement of the radiative process. Moreover, the photoinduced charge-transfer processes in the polyamide network structure easily explain the performance of CDs in applications as revealed in studies on metal ion sensing. These findings thus are of general importance to the further development of polymer CDs with tailored properties as well as for the design of technological applications., This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 642742. AMB, and WKM further acknowledge Spanish MINEICO (project ENE2016-79282-C5-1-R), the Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds). EPU acknowledges Gobierno de Aragón (Grupo Reconocido DGA E19_17R) and associated EU Regional Development Funds. Technical and human support provided by IZO-SGI, SGIker (UPV/EHU, MICINN, GV/EJ ERDF and ESF) is gratefully acknowledged for assistance and generous allocation of computational resources., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interfacing transition metal dichalcogenides with carbon nanodots for managing photoinduced energy and chargetransfer processes

  • Vallan, Lorenzo
  • Canton-Vitoria, Rubén
  • Gobeze, Habtom B.
  • Jang, Youngwoo
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Souza, Francis d'
  • Tagmatarchis, Nikos
Exfoliated semiconducting MoS2 and WS2 were covalently functionalized with 1,2-dithiolane-modified carbon nanodots (CNDs). The newly synthesized CND-MoS2 and CND-WS2 hybrids were characterized by spectroscopic, thermal and electron microscopy imaging methods. Based on electronic absorption and fluorescence emission spectroscopy, modulation of the optoelectronic properties of TMDs by interfacing with CNDs was accomplished. Electrochemical studies revealed facile oxidation of MoS2 over WS2 in the examined hybrids, suggesting it to be better electron donor. Excited state events, investigated by femtosecond transient absorption spectroscopic studies, revealed ultrafast energy transfer from photoexcited CNDs to both MoS2 and WS2. Interestingly, upon MoS2 photoexcitation charge transfer from an exciton dissociation path of MoS2 to CNDs, within CNDMoS2, was observed. However, such process in CND-WS2 was found to be absent due to energetic reasons. The present study highlights the importance of TMD-derived donor-acceptor hybrids in light energy harvesting and optoelectronic applications. Furthermore, the fundamental information obtained from the current results will benefit design strategies and impact the development of additional TMD-based hybrid materials to efficiently manage and perform in electron-transfer processes., This project has received funding from the European Union‘s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, funded by the Operational Programme "Competitiveness, Entrepreneurship and Innovation" co-financed by Greece (Ministry of Economy and Development, NSRF 2014-2020) and EU (European Regional Development Fund) to N. T. and the US-NSF (grant 1401188 to F. D.) is acknowledged. The HR-STEM and STEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R. A. acknowledges support from Spanish MINECO grant MAT2016- 79776-P (AEI/FEDER, UE) and from EU H2020 “Graphene Flagship” grant agreement 785219. W. K. M. and A. M. B. acknowledge Spanish MINECO grant ENE2016-79282-C5-1-R (AEI/FEDER, EU) and the Covernment of Aragon through project DGA-T03_17R (FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Charge-transfer characteristics in carbon nanostructure/metal oxide photoelectrodes efficiently probed by hydrogen peroxide

  • Hernández-Ferrer, Javier
  • Ansón-Casaos, Alejandro
  • Víctor-Román, Sandra
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
© 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The charge-transfer characteristics of nanostructured carbon/TiO2 electrodes is studied by cyclic voltammetry under photoelectrochemical conditions exploiting the electrooxidation and electroreduction of H2O2 in an alkaline medium. Films of composites were prepared by physically mixing TiO2 with 5 wt.% of either singlewalled carbon nanotubes (SWCNTs) or reduced graphene oxide (rGO). In addition, a layer-by-layer rGO/TiO2 electrode was prepared. Under dark conditions, both mixed SWCNTs and rGO facilitate H2O2 reduction. Under light irradiation, the blank TiO2 electrode shows a cathodic photopotential, the SWCNT/TiO2 an anodic photopotential, and the mixed rGO/TiO2 an increased cathodic photopotential. This scenario unambiguously reveals a photoelectron acceptor behavior for SWCNTs and a photohole acceptor performance for rGO. The latter one also agrees with the photoactivity observed in the layer-by-layer electrode. Overall, the value of H2O2 redox reactions for unraveling the electron-donor or electron-acceptor character of carbon nanostructures in C/metal oxide electrodes is demonstrated., The authors thank Dr. B. Villacampa (University of Zaragoza) for the profilometer analysis, MSc. O. Sanahuja for GO preparation, and Eng. C. Rubio Muñoz for the SWCNT/TiO2 electrode preparation. This work has been funded by MINECO and European Regional Development Fund (ENE 2016-79282-C5-1-R), the Government of Aragon (T03-17R), and European Commission (H2020-MSCA-ITN-2014-ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Preparation of metallic and semiconducting SWCNT inks by a simple chromatographic method: a two-parameter study

  • Santidrián, Ana
  • Lozano, Nekane
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Ansón-Casaos, Alejandro
Single-walled carbon nanotubes (SWCNTs) show either metallic or semiconducting character, and are potential candidates for the development of small electronic devices. However, commercial SWCNT materials consist of a mixture of many different SWCNT conformations and certain impurities. In this work, SWCNTs are dispersed in an aqueous medium, purified by centrifugation, and finally separated into metallic and semiconducting inks by a gel chromatog-raphy method. The separation is directly performed at ambient conditions, and the influence of the ink concentration and the chromatography column length are thoroughly evaluated. The most efficient separation, distinguishing between fami-lies of semiconducting SWCNT with different diameters, is achieved at the lowest concentration and with the longest column. These results provide a promising base for availability of SWCNTs with well-defined characteristics needed for the de-velopment of electronic devices., This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Carbon nanofoam supercapacitor electrodes with enhanced performance using a water-transfer process

  • Nufer, Sebastian
  • Lynch, Peter J.
  • Cann, Maria
  • Large, Matthew J.
  • Salvage, Jonathan P.
  • Víctor-Román, Sandra
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Brunton, Adam
  • Dalton, Alan B.
Carbon nanofoam (CNF) is a highly porous, amorphous carbon nanomaterial that can be produced through the interaction of a high-fluence laser and a carbonbased target material. The morphology and electrical properties of CNF make it an ideal candidate for supercapacitor applications. In this paper, we prepare and characterize CNF supercapacitor electrodes through two different processes, namely, a direct process and a water-transfer process. We elucidate the influence of the production process on the microstructural properties of the CNF, as well as the final electrochemical performance. We show that a change in morphology due to capillary forces doubles the specific capacitance of the wet-transferred CNF electrodes., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 642742. A.M.B., J.H.-F., and W.K.M. acknowledge Spanish MINEICO (project ENE2016-79282-C5-1-R), the Gobierno de Aragón (Grupo Reconocido DGA-T03_17R), and associated EU Regional Development Funds. S.V.-R. thanks Spanish MINEICO for her Ph.D. grant (BES2014-068727 and associated EU Social Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Nanostructured polythiophene hybrid charge-transfer complexes

  • Istif, Emin
Tesis llevada a cabo para conseguir el grado de doctor en la Universidad de Zaragoza. 2018-12-19., [EN] This work focuses on the synthesis of novel donor-acceptor (D/A) nano hybrids of water-soluble types of polythiophene, the elucidation of the electronic interaction between the D/A units, and the performance of the nanohybrids in the form of thin film in optoelectronic applications. Using in-situ self-assembly synthesis approaches of polythiophene in the presence of different nanomaterials, such as graphene oxide, semiconducting quantum dots, and sheets of transition metal dichalcogenides the formation of water-soluble charge-transfer complexes with superior optoelectronic properties was achieved, being of relevance for the development of thin-film optoelectronic devices., [ES] Este trabajo se centra en la síntesis de nuevos nanohíbridos dador-aceptor (D/A) de politiofeno solubles en medios acuosos y en la elucidación de la interacción electrónica entre las unidades D/A como en el funcionamiento de los nanohíbridos en forma de películas delgadas en aplicaciones optoelectrónicas. Utilizando técnicas de auto-ensamblaje in-situ de politiofeno en presencia de diferentes nanomateriales como son el óxido de grafeno, puntos cuánticos de semiconductores o láminas de dicalcogenuros de metales de transición se ha conseguido la formación de complejos de transferencia de carga, solubles en agua y con superiores propiedades electrónicas de relevancia para el desarrollo de dispositivos optoelectrónicos basados en películas delgadas., This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement No. 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Integrating water-soluble polythiophene with transition-metal dichalcogenides for managing photoinduced processes

  • Canton-Vitoria, Rubén
  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Tagmatarchis, Nikos
6 Figuras. Información complementaria disponible en la página web del editor., Transition-metal dichalcogenides (TMDs) attract increased attention for the development of donor–acceptor materials enabling improved light harvesting and optoelectronic applications. The development of novel donor–acceptor nanoensembles consisting of poly(3-thiophene sodium acetate) and ammonium functionalized MoS2 and WS2 was accomplished, while photoelectrochemical cells were fabricated and examined. Attractive interactions between the negatively charged carboxylate anion on the polythiophene backbone and the positively charged ammonium moieties on the TMDs enabled in a controlled way and in aqueous dispersions the electrostatic association of two species, evidenced upon titration experiments. A progressive quenching of the characteristic fluorescence emission of the polythiophene derivative at 555 nm revealed photoinduced intraensemble energy and/or electron transfer from the polymer to the conduction band of the two TMDs. Photoelectrochemical assays further confirmed the establishment of photoinduced charge-transfer processes in thin films, with distinct responses for the MoS2- and WS2-based systems. The MoS2-based ensemble exhibited enhanced photoanodic currents offering additional channels for hole transfer to the solution, whereas the WS2-based one displayed increased photocathodic currents providing supplementary pathways of electron transfer to the solution. Moreover, scan direction depending on photoanodic and photocathodic currents suggested the existence of yet unexploited photoinduced memory effects. These findings highlight the value of electrostatic interactions for the creation of novel donor–acceptor TMD-based ensembles and their relevance for managing the performance of photoelectrochemical and optoelectronic processes., This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 642742. Support of this work by the projects “Advanced Materials and Devices” (MIS 5002409), which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, and “National Infrastructure in Nanotechnology, Advanced Materials and Micro-/Nanoelectronics” (MIS 5002772), which is implemented under the “Reinforcement of the Research and Innovation Infrastructures”, funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014–2020) and cofinanced by Greece and the European Union (European Regional Development Fund) to N.T. is acknowledged. A.M.B. and W.K.M. further acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R), the Gobierno de Aragón (Grupo Reconocidos DGA-T03_17R), and associated EU Regional Development Funds. E.P.U. thanks Gobierno de Aragón (Grupo de Investigación de Referencia E19_17R). The authors are thankful for SEC measurements carried out at Laboratories de Chime des Polymères Organiques (LCPO), University of Bordeaux, CNRS, Bordeaux INP. We would like to thank Dr. C. Chochos of the Institute of Biology, Medicinal Chemistry and Biotechnology/National Hellenic Research Foundation (IBMCB/NHRF) for helping with SEM images acquisition. NHRF acknowledges the General Secretariat for Research and Technology (GSRT) for the financial support through the Research Programs for Excellence under the Programmatic Agreement between Research Centers − GSRT (2015−2017), funded by Siemens SA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemical postdeposition treatments to improve the adhesion of carbon nanotube films on plastic substrates

  • Santidrián, Ana
  • Sanahuja-Parejo, Olga
  • Villacampa, Belén
  • Diez-Ferrer, José Luis
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Muñoz, Edgar
  • Ansón-Casaos, Alejandro
The robust adhesion of single-walled carbon nanotubes (SWCNTs) to plastic substrates is a key issue toward their use in flexible electronic devices. In this work, semitransparent SWCNT films were prepared by spray-coating on two different plastic substrates, specifically poly(ethylene terephthalate) and poly(vinylidene fluoride). The deposited SWCNT films were treated by dipping in suitable solvents separately, namely, 53% nitric acid (HNO3) and N-methyl pyrrolidone. Direct evidence of SWCNT adhesion to the substrate was obtained by a peel-off test carried out with an adhesive tape. Moreover, these treatments caused enhanced film transparency and electrical conductivity. Electron microscopy images suggested that SWCNTs were embedded in the plastic substrates, forming a thin layer of conductive composite materials. Raman spectroscopy detected a certain level of doping in the SWCNTs after the chemical treatments, which particularly affected metallic nanotubes in the case of the HNO3 treatment. The microscopic adhesion and hardness of the SWCNT films were studied through a nanoscratch test. Overall, the efficiency of selected chemical postdeposition treatments for improving the SWCNT adhesion and the robustness of the resulting SWCNT films are demonstrated on flexible substrates of different chemical compositions., This work has been funded by the MINECO and the European Regional Development Fund (ENE 2016-79282-C5-1-R), the Government of Aragón (T03-17R and E14-17R), and the European Commission (H2020-MSCA-ITN-2014-ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A tool box to ascertain the nature of doping and photoresponse in single-walled carbon nanotubes

  • Santidrián, Ana
  • González Domínguez, José Miguel
  • Díez-Cabanes, Valentín
  • Hernández-Ferrer, Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Ansón-Casaos, Alejandro
  • Cornil, Jérôme
  • Ros, Tatiana da
  • Kalbáč, Martin
6 Figuras. 3 Tablas., The effect of doping on the electronic properties in bulk single-walled carbon nanotube (SWCNT) samples is studied for the first time using a new in situ Raman spectroelectrochemical method, and further verified by DFT calculations and photoresponse. We use p-/n-doped SWCNTs prepared by diazonium reactions as a versatile chemical strategy to control the SWCNT behavior. The measured and calculated data testify an acceptor effect of 4-aminobenzenesulfonic acid (p-doping), and a donor effect (n-doping) in the case of benzyl alcohol. In addition, pristine and covalently functionalized SWCNTs were used for the preparation of photoactive film electrodes. The photocathodic current in the photoelectrochemical cell is consistently modulated by the doping group. These results validate the in situ Raman spectroelectrochemistry as a unique tool box for predicting the electronic properties of functionalized SWCNTs in the form of thin films and their operational functionality in thin film devices for future optoelectronic applications., The authors acknowledge financial support from the European Union FP7 RADDEL programme (ITN Marie Curie Actions PEOPLE-2011-290023) and the MEYS Inter Excellence Project no. LTC18039 and H2020-MSCA RISE Agreement no. 734834 (INFUSION). This work at the Instituto de Carboquímica has been funded by the MINECO and the European Regional Development Fund (ENE 2016-79282-C5-1-R), the Government of Aragon (T03-17R), and the European Commission (H2020-MSCA-ITN-2014-ETN 642742 ‘Enabling Excellence’). The work in Mons is supported by the European Union H2020 iSwitch programme (H2020-MSCA-ITN-2014-ETN 642196). Computational resources in Mons were provided by the Consortium des Équipements de Calcul Intensif (CÉCI) funded by the Belgian National Fund for Scientific Research (F.R.S.-FNRS) under Grant 2.5020.11. J. C. is an FNRS research director. The authors acknowledge the assistance provided by the Research Infrastructures NanoEnviCz (Project No. LM2015073) supported by the Ministry of Education, Youth and Sports of the Czech Republic and the project Pro-NanoEnviCz (Reg. no. CZ.02.1.01/0.0/0.0/16_013/0001821) supported by the Ministry of Education, Youth and Sports of the Czech Republic and the European Union – European Structural and Investments Funds in the frame of Operational Programme Research Development and Education. J. M. G.-D. is grateful to Spanish Ministry of Science, Innovation and Universities for his ‘Juan de la Cierva – Incorporación’ research grant. A. S. is grateful to Dr Sara Costa and Dr Johan Ek Weis for fruitful discussions and helpful comments., We also acknowledge institutional support from the Unit of Information Resources for Research at the "Consejo Superior de Investigaciones Científicas" (CSIC) for the article-processing charges contribution, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

MoS2-carbon nanotube hybrid material growth and gas sensing

  • Deokar, Geetanjali
  • Vancsó, Péter
  • Arenal, Raúl
  • Ravaux, Florent
  • Casanova-Cháfer, Juan
  • Llobet, Eduard
  • Makarova, Anna A.
  • Vyalikh, Denis V.
  • Struzzi, Clauida
  • Lambin, Philippe
  • Jouiad, Mustapha
  • Colomer, Jean-François
Hexagonal‐shaped nanoplates (HNPs) of MoS2 on vertically aligned carbon nanotubes (CNTs) over a patterned area (a circular area of 1 cm2 diameter) are produced by chemical vapor deposition technique. With an optimized initial Mo film thickness, a uniform coverage of MoS2 HNPs with a thickness around 20 nm is achieved. The results confirm that the CNT template plays an important role in the MoS2 HNPs growth. Each MoS2 HNP consists of abundant exposed edges, interesting for sensing and catalysis applications. High crystallinity and quality of the as‐produced material are revealed by X‐ray photoelectron and Raman spectroscopies. Furthermore, NO2 gas‐sensing studies show better sensitivity and recovery for MoS2/CNT samples as compared to pristine CNTs. The detection of NO2 gas in a few tens of parts per million to a few hundreds of parts per billion range, at room temperature, is achieved. Density‐functional theory calculation indicates that the exposed edges of MoS2 play a significant role in the NO2 sensing as compared to horizontally aligned MoS2 layers. The present report can promote the research toward the fabrication of efficient and reliable MoS2‐based hybrid materials for toxic gas‐sensing applications for air quality monitoring in various environments., This research leading to these results received funding in part from European Union Seventh Framework H2020 Program under Grant Agreement No. 696656 Graphene Flagship. J.-F.C. is Senior Research Associate of FRS-FNRS. R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (Grant No. E/26), and from the European Union H2020 program ETN project “Enabling Excellence” Grant Agreement No. 642742. E.L. was supported by the Catalan Institution for Research and Advanced Studies via the ICREA Academia Award and MINECO-FEDER (grant no. TEC2015-71663-R) and J.C.-C. was supported by Universitat Rovira i Virgili via a Martí i Franquès predoctoral fellowship. This work was supported by the Helmholtz-Zentrum Berlin für Materialien und Energie within a bilateral Russian–German Laboratory program. A.A.M. acknowledges support from DFG, Grant No. LA655/13-2. D.V.V. acknowledges Saint Petersburg State University (SPbU) for research Grant No. 15.61.202.2015., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Capacitive and charge transfer effects of single‐walled carbon nanotubes in TiO2 electrodes

  • Ansón-Casaos, Alejandro
  • Rubio-Muñoz, Cristina
  • Hernández-Ferrer, Javier
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
6 Figuras.- 1 Suplemento.- Título del pre-print: "Metallic and semiconducting carbon nanotube features observed in a hybrid titanium dioxide electrode".- This is the pre-peer reviewed version of the following article: ChemPhysChem 20: 838-847 (2019), which has been published in final form at DOI:10.1002/cphc.201900066. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions., The transfer of nanoscale properties from single‐walled carbon nanotubes (SWCNTs) to macroscopic systems is a topic of intense research. In particular, inorganic composites of SWCNTs and metal oxide semiconductors are being investigated for applications in electronics, energy devices, photocatalysis, and electroanalysis. In this work, a commercial SWCNT material is separated into fractions containing different conformations. The liquid fractions show clear variations in their optical absorbance spectra, indicating differences in the metallic/semiconducting character and the diameter of the SWCNTs. Also, changes in the surface chemistry and the electrical resistance are evidenced in SWCNT solid films. The starting SWCNT sample and the fractions as well are used to prepare hybrid electrodes with titanium dioxide (SWCNT/TiO2). Raman spectroscopy reflects the optoelectronic properties of SWCNTs in the SWCNT/TiO2 electrodes, while the electrochemical behavior is studied by cyclic voltammetry. A selective development of charge transfer characteristics and double‐layer behavior is achieved through the suitable choice of SWCNT fractions., This work has been funded by the Spanish Ministry of Science and the European Regional Development Fund (ENE 2016‐79282‐C5‐1‐R), the Government of Aragon (T03‐17R), and the European Commission (H2020‐MSCA‐ITN‐2014‐ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Fluorescent polymeric carbon dots: from synthesis and elucidation of chemical structure towards photoactive hybrid materials

  • Vallan, Lorenzo
250 Pags.-Tabls, Figs. Anexos.-- Tesis realizada en el Instituto de Carboquímica (ICB-CSIC), llevada a cabo para conseguir el grado de Doctor en la Universidad de Zaragoza, leída el 26 febrero de 2019.-- Sobresaliente "cum laude"., [EN] This work covers three fundamental aspects in the field of carbon dots (CDs). The first part describes detailed structural, optical and theoretical studies which lead to the identification of the chemical structure and the origin of the universal blue fluorescence of CDs. The second part presents a new method enabling the control of the structure and the chemical properties of the polymeric CDs, thus offering a highly versatile toolbox for the design of CDs suitable for applications in sensing and medical applications. The third part focusses on the preparation of novel hybrid materials based on CDs and transition metal dichalcogenides (MoS2 and WS2) para su uso en aplicaciones de photocatalysis and energy conversion., [ES] En este trabajo se cubren tres aspectos fundamentales de la investigación en el campo de los carbón dots (CDs). A través de detallados estudios estructurales, caracterización óptica y cálculos teóricos, la primera parte de la tesis consigue identificar las estructuras orgánicas y las fuerzas que producen la fluorescencia azul. En la segunda parte, se ha presentado un nuevo método para controlar la estructura y las propiedades químicas de nanopartículas poliméricas, ofreciendo una herramienta muy versátil para el diseño de materiales basados en CDs como sensores y vectores de fármacos. En la tercera y última parte de la tesis, a partir de los CDs y dicalcogenuros de metales de transición (MoS2 y WS2) se han preparado materiales híbridos, con vistas a su posible uso en aplicaciones de fotocatálisis y conversión de energía., This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement No. 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Active magnetoplasmonic split-ring/ring nanoantennas

  • Feng, Hua Yu
  • Feng, Luo
  • Arenal, Raúl
  • Henrard, Luc
  • García-Pérez, Fernando
  • Armelles Reig, Gaspar
  • Cebollada, Alfonso
Here we present a novel active system, which combines the plasmon resonance enhancement of the magneto-optical activity in magnetoplasmonic nanostructures and the strong electromagnetic field localization of split ring resonators. The structures consist of a gold split ring resonator placed on top of a gold nanoring in the section of which a Co nanodot is inserted. By placing the split ring gap on top of the nanodot, and continuously varying the split ring gap opening, we are able to tune and enhance the electromagnetic field intensity in the Co nanodot, as confirmed experimentally by EELS and numerically using DDA simulation methods. In this way we obtain structures with a magneto-optical activity, which is 3 times larger than that of equivalent magnetoplasmonic rings without a split ring on top. These enhanced performances are due to the better control of the positioning, dimensions, and shape of the different components of the system. Such improvements are achieved using hole-mask colloidal lithography technique combined with multiaxial evaporation of the different materials., We acknowledge funding from the Spanish Ministry of Economy and Competitiveness (CSD2008-00023, MAT2011- 29194-C02-01, FIS2013-46159-C3-3-P, and MAT2014-58860-P), the EU 7th Framework Program (Grant Agreement 312483), and the EU-H2020 project (grant number 642742). H. Y. Feng acknowledges funding from CSC (Chinese Scholarship Council), grant no. 201206220112. F. Luo would like to acknowledge the support of NSFC (No. 51002003 & 11090332) as well as Ramon y Cajal grant RYC-2012-11954. The TEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA) - Universidad de Zaragoza (Spain). This research used resources of the “Plateforme Technologique de Calcul Intensif (PTCI)” located at the University of Namur, Belgium, which is supported by the F.R.S.-FNRS under the convention no. 2.5020.11. The PTCI is the member of the “Consortium des Équipements de Calcul Intensif (CÉCI)”. R. A. gratefully acknowledges the support from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoscale J-aggregates of poly(3-hexylthiophene): Key to electronic interface interactions with graphene oxide as revealed by KPFM

  • Palacios-Lidón, E.
  • Istif, Emin
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Colchero, J.
1 Esquema, 4 Figuras, The performance of organic thin film optoelectronic devices strongly relies on the nanoscale aggregate structure of the employed conjugated polymer. Their impact on electronic interface interactions with adjacent layers of graphene, widely reported to improve the device characteristics, yet remains an open issue, which needs to be addressed by an appropriate benchmark system. Here, we prepared discrete ensembles of poly(3-hexylthiophene) nanoparticles and graphene oxide sheets (P3HTNPs–GO) with well defined aggregate structures of either J- or H- type and imaged their photogenerated charge transfer dynamics across their interface by Kelvin probe force microscopy (KPFM). A distinctive inversion of the sign of the surface potential and surface photovoltage (SPV) demonstrates that J-aggregates are decisive for establishing charge transfer interactions with GO. These enable efficient injection of photogenerated holes from P3HTNPs into GO sheets over a range of tens of nanometers, causing a slow SPV relaxation dynamics, and define their operation as efficient hole-transport layer (HTL). Conversely, H-type aggregates do not facilitate specific interactions and entrust GO sheets the role of charge-blocking layers (CBL). The direct effect of P3HT’s aggregate structure on GO’s functional operation as HTL or CBL thus establishes clear criteria towards the rational design of improved organic optoelectronic devices., This work has received funding from the Spanish MINECO (project grants ENE 2016-79282-C5-1-R and ENE 2016-79282-C5-4-R) and associated EU Regional Development Funds. A.M.B., E.I., and W.K.M. acknowledge funding from European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowksa-Curie grant agreement no. 642742. They also acknowledge the Gobierno de Aragón (Grupo Reconocido DGA T03_17R) and associated EU Regional Development Funds., We also acknowledge institutional support from the Unit of Information Resources for Research at the "Consejo Superior de Investigaciones Científicas" (CSIC) for the article-processing charges contribution., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A versatile room-temperature method for the preparation of customized fluorescent non-conjugated polymer dots

  • Vallan, Lorenzo
  • Urriolabeitia, Esteban P.
  • Benito, Ana M.
  • Maser, Wolfgang K.
5 Figuras, 2 Tablas.-- Material suplementario disponible en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, We present a general procedure for the synthesis and in situ functionalization of highly fluorescent non-conjugated polymer dots, by exploiting the room-temperature carbodiimide-mediated condensation between citric acid and amines. The versatility of this method is proved by the preparation and characterization of a broad set of fluorescent nanoparticles with customized polymer structures and functional groups., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. A.M.B., W.K.M acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R) and associated EU Regional Development Funds. E.P.U acknowledges the Gobierno de Aragón (Grupo Reconocido DGA E19-17R) and associated EU Regional Development Funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Functionalization of silver nanowire transparent electrodes with self-assembled 2-Dimensional tectomer nanosheets

  • Jurewicz, Izabela
  • Garriga, Rosa
  • Large, Matthew J.
  • Burn, Jake
  • Bardi, Niki
  • King, Alice A. K.
  • Velliou, Eirini G.
  • Watts, John F.
  • Hinder, Steven J.
  • Muñoz, Edgar
  • Dalton, Alan B.
9 Figuras.-- Información complementaria disponible en línea en la página web del editor.-- This document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in ACS Applied Nano Materials 1,8, 3903-3912 (2018), copyright © American Chemical Society after peer review. To access the final edited and published work see http://dx.doi.org/10.1021/acsanm.8b00689, Here, we describe the unusual self-assembly of amine-terminated oligoglycine peptides into extended two-dimensional sheets in the presence of silver nanowires. The resulting tectomer sheets are shown to have a strong affinity for the nanowires through a charge-transfer interaction as evidenced by X-ray photoelectron spectroscopy. We show that extended assemblies of metal–peptide hybrids offer additional augmentative functionalities; for instance, the tectomer sheets are hydrophobic in nature and act as a protective layer preventing oxidation and degradation of the nanowires when exposed to atmospheric conditions. Moreover, for silver nanowire percolating networks the presence of the peptide markedly increases the overall electrical conductivity through mechanical squeezing of wire–wire junctions in the network. The peptide–metal interface can be controlled by pH stimulus thus potentially offering new directions where silver nanowire assemblies are used for transparent electrodes ranging from antimicrobial coatings to biosensors., This work was supported by Grant EP/K031562 from the Engineering and Physical Sciences Research Council (EPSRC), ENE2013-48816-C5-5-R project (Plan Nacional de I+D+I, from Spanish Ministerio de Economía y Competitividad MINECO), and H2020-MSCA-ITN-2014 Enabling Excellence project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Percolating metallic structures templated on laser-deposited carbon nanofoams derived from graphene oxide: applications in humidity sensing

  • Nufer, Sebastian
  • Fantanas, Dimitrios
  • Ogilvie, Sean P.
  • Large, Matthew J.
  • Winterauer, Dominik J.
  • Salvage, Jonathan P.
  • Meloni, Manuela
  • King, Alice A. K.
  • Schellenberger, Pascale
  • Shmeliov, Aleksey
  • Víctor-Román, Sandra
  • Peláez-Fernández, Mario
  • Nicolosi, Valeria
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Brunton, Adam
  • Dalton, Alan B.
5 Figuras.-- Información complementaria disponible en línea en la página web del editor, Carbon nanofoam (CNF) is a low-density, high-surface-area material formed by aggregation of amorphous carbon nanoparticles into porous nanostructures. We report the use of a pulsed infrared laser to prepare CNF from a graphene oxide (GO) target material. Electron microscopy shows that the films consist of dendritic strings that form web-like three-dimensional structures. The conductivity of these structures can be modified by using the CNF as a nanostructured scaffold for gold nanoparticles deposited by sputter coating, controllably increasing the conductivity by up to 4 orders of magnitude. The ability to measure the conductivity of the porous structures allows electrochemical measurements in the environment. Upon decreasing humidity, the pristine CNF exhibits an increase in resistance with a quick response and recovery time. By contrast, the gold-sputtered CNF showed a decrease in resistance, indicating modification of the doping mechanism due to water adsorption. The sensitivity to humidity is eliminated at the percolation threshold of the metal on the CNF., Graham Booth’s work is highly appreciated, helping to set up the deposition system. This work has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement 642742 as well as from EU H2020 program “Graphene Flagship” (Grant Agreement 696656). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (Grant MAT2016-79776-P, (AEI/FEDER, UE)), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (Grant E/26). A.M.B and W.K.M gratefully acknowledge the financial support from Spanish MINECO and AEI (Project ENE2016-79282-C5-1-R and associated EU Regional Development Funds) and the Gobierno de Aragón (Consolidated Group DGA-T66-GCNN and associated EU Social Funds). S.V.-R. thanks Spanish MINECO for her Ph.D. grant (BES2014-068727 and associated EU Social Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Tuning aggregation and charge transfer of poly(3-hexylthiopene) nanoparticles by graphene oxide

  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Stergiou, Anastasios
  • Tagmatarchis, Nikos
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del trabajo presentado a la International Conference on Carbon Nanoscience and Nanotechnology (NanoteC), celebrada en Nantes (Francia) del 30 de agosto al 2 de septiembre de 2017., Nanoparticles derived from conjugated polymers have attracted widespread attention for a number of reasons such as their easy synthesis, tuneable properties, less toxicity and environmentally friendly processing conditions for device fabrication. Besides, their properties can be enhanced by preparing composites with carbon nanomaterials. Poly-3-hexyl thiophene (P3HT), the archetype of conducting polymers, is characterized by the presence of quasi-crystalline domains (i.e. H, J or H-J aggregates) defining the electro-optical properties. However, reliable control of these nanoscale aggregates plays an essential role to tune charge transport and charge separation properties. In this work, we report the self-assembly of novel conjugated polymer nanoparticle/graphene oxide (P3HTNPs/GO) composites using a re-precipitation technique. The resulting composites are stable in aqueous dispersions and can be processed directly instead of usual hazardous chlorinated solvents. Photophysical studies reveals that the internal aggregate structure of the P3HTNPs is affected by GO and can be tuned by varying the amount of GO. Meanwhile, Raman spectroscopy and cyclic voltammetry reveal that the observed changes in the P3HTNP aggregate structure of the P3HTNPs/GO composite are accompanied by a charge transfer process taking place at the interface between P3HTNPs and the GO sheets. Our synthesis approach leading to novel P3HTNPs/GO composites with tuneable electro-optical properties and environmental-friendly processing characteristics thus may provide a base for the development of further functional nanomaterials for variety of applications for photovoltaic or sensing applications., EU H2020 MSC ITN 642742. MINECO (ENE2016-79282-C5-1-R). DGA-T66-GCNN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Preparation and characterization of poly(3-hexyl thiophene) nanoparticles and graphene oxide composites in water

  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Tagmatarchis, Nikos
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del póster presentado a la 9th Stuttgart Nanodays Conference, celebrada en Munich (Alemania) del 13 al 15 de septiembre de 2017., Funding by EU (Project H2020-ITN 2014 642742), Spanish MINECO (ENE2013-48816-C5-5-R) and Government of Aragon (DGA-ESF-T66), is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Structural elucidation and comparison of fluorescent carbon dots

  • Vallan, Lorenzo
  • Benito, Ana M.
  • Martínez Fernández de Landa, María Teresa
  • Urriolabeitia, Esteban P.
  • Maser, Wolfgang K.
Resumen del póster presentado a la 9th Stuttgart Nanodays Conference, celebrada en Munich (Alemania) del 13 al 15 de septiembre de 2017., Funding by EU (Project H2020-ITN 2014 642742), Spanish MINECO (ENE2013-48816-C5-5-R) and Government of Aragon (DGA-ESF-T66), is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Novel materials for optoelectronic devices: Conjugated polymer nanoparticle-graphene oxide charge-transfer complexes

  • Maser, Wolfgang K.
  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Stergiou, Anastasios
  • Tagmatarchis, Nikos
  • Fratta, Giuseppe
  • Colchero, J.
  • Palacios-Lidón, E.
  • Kalbáč, Martin
  • Large, Matthew J.
  • Dalton, Alan B.
  • Benito, Ana M.
Resumen del trabajo presentado al Nano Application Workshop, celebrado en Munich (Alemania) del 19 al 21 de septiembre de 2018., Conjugated polymers (CPs) constitute the base of organic thin film optoelectronic devices, such as organic photovoltaic solar cells (OSCs) and organic light emitting devices (OLEDs). Deposited onto large areas of any shape they critically contribute to the development of self-powered, smart and ubiquitous communication platforms. Operational performance and fabrication from 'green' solutions compatible with large-area coating or printing technologies are key requirements for their commercial implementation. Applying self-assembly strategies, CPs can be prepared in the form of water dispersible nanoparticles being of actual interest for achieving improved device performance. In this work we present novel pathways for the design of improved organic thin film optoelectronic devices by marrying nanoparticles of CPs (CPNPs) with 2D sheets of graphene oxide (GO). Using poly(3-hexylthiophene) (P3HT) as benchmark CP, we demonstrate the game-changing role of GO in tuning the excitonic aggregate behavior of P3HTNPs and the efficient formation P3HTNPs-GO charge-transfer complexes. Thin films thereof reveal improved separation of photo-generated charge carriers. Integration into a photoelectrochemical device shows significantly improved photoactivity. Moreover, the thin films reveal unique molecular switching behavior. The possibility to overcome external performance limitations and to employ 'green' processing technologies offers exciting possibilities for further progress in the field of organic thin film optoelectronic devices., EU Horizon 2020 Marie Sklodowska-Curie grant 642742 ("Enabling Excellence"), Spanish Ministry MINEICO (ENE2016-79282-C5-1-R), Government of Aragón (Recognized Group DGA-T03-17R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Carbon dots on TiO2 for perovskite photovoltaics, methanol oxidation and water splitting

  • Ansón-Casaos, Alejandro
  • Vallan, Lorenzo
  • Hernández-Ferrer, Javier
  • Xie, Haibing
  • Lira-Cantú, Mónica
  • Benito, Ana M.
  • Maser, Wolfgang K.
Talk delivered in 7th International conference on Advanced Hydrogen Energy, ANM conference series 2019, at University of Aveiro, in Aveiro, Portugal, 17-19 July 2019.- 1 Figura, Carbon dots (CDs) are a class of fluorescent nanoparticles including an extremely rich variety of structures and functional groups. Interestingly, not only the physicochemical properties are affected by the nature of the CD structure, but also their optical behavior. Fluorescence in CDs shows particular characteristics of strong intensity and wavelengths in the visible region. Consequently, an interesting issue arises on how structurally-different CDs modify the electron transport and photoactivity of semiconductor oxides, in particular TiO2., This work has been funded by the MINECO and the European Regional Development Fund (ENE 2016-79282-C5-1-R), the Government of Aragón (T03-17R and E14-17R), and the European Commission (H2020-MSCA-ITN-2014-ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Procesado químico-físico de nanomateriales de carbono para la preparación de tintas y películas funcionales

  • Santidrián, Ana
244 páginas.-- 105 Figuras.--Tesis realizada en el Instituto de Carboquímica (ICB-CSIC), para conseguir el grado de doctor en la Universidad de Zaragoza.-- Sobresaliente "cum laude"., [EN] Carbon nanotubes (CNT) are increasingly present as components in electronic applications as sensors, touch screens or energy devices, therefore a commercial reality. The most important challenges that CNT must face in this field are controlled, stable and endured doping levels, purity, scalability, and the cost of CNT separation into metallic and semiconductors; and its processing and controlled deposition in flexible substrates. This Thesis focuses on the use of single walled carbon nanotubes (SWCNT) and other carbon nanomaterials, specifically carbon nanohorns (CNH), in powder. They are processed in the form of inks and thin films and their properties are tuned through physicochemical treatmetns for their potential use in optoelectronics. Firstly, modifications applied to SWCNT and CNH through chemical functionalization strategies that lead to a precise control of their electronic properties are here presented. Then, these SWCNT materials are dispersed in water by ultracentrifugation to obtain purified stable inks with tuned colloidal properties. Also the use of the chromatographic column separation allows the obtention of SWCNT inks enriched in metallic and semiconducting SWCNT. The resulting inks are used in the fabrication of films which are then put through electrochemical treatments and laser processing, leading finally to selective elimination of SWCNT and controlled doping levels. Also, chemical treatments to SWCNT films in flexible substrate were conducted to improve the adhesion and the obtention of robust conductive, transparent and flexible films. Characterization analysis through colloidal, electric, spectroscopic, electrochemical and microscopic techniques are also presented. All the experimental methodology was planned and conducted with a view to its potential industrial use in future commercial applications. Therefore the results presented here combine basic science focused on the obtention of new knowledge but also on they potential use in electronic appliances and in the development of SWCNT and CNH based electronic devices., [ES] Los nanotubos de carbono (CNT de las siglas en inglés carbon nanotubes) se están abriendo paso como componentes en aplicaciones electrónicas como sensores, pantallas táctiles o dispositivos de energía, convirtiéndose así en una realidad comercial. En este ámbito, los principales retos a los que se enfrentan los CNT son: conseguir niveles de dopado controlables, estables y prolongados en el tiempo; la pureza, la escalabilidad y el costo de la separación de CNT en metálicos y semiconductores; el procesado y el depósito controlado de CNT sobre sustratos flexibles. La presente Tesis Doctoral se centra en el uso de nanotubos de carbono de pared única (SWCNT de las siglas en inglés de single-walled carbon nanotubes) y de otros nanomateriales de carbono, en concreto nanohorns de carbono (CNH de las siglas en inglés de carbon nanohorns), en polvo para preparar tintas y con ellas fabricar películas con propiedades moduladas y controladas a través de tratamientos fisicoquímicos para su potencial aplicación en una de las áreas de mayor relevancia tecnológica: la optoelectrónica. En primer lugar, se presentan las modificaciones realizadas a los SWCNT y los CNH en polvo a través de estrategias de funcionalización química que resultan en un control preciso de las propiedades electrónicas. Posteriormente se dispersan en agua estos materiales de SWCNT en polvo para conseguir tintas estables purificadas por ultracentrifugación con control específico de las propiedades coloidales. Además, el método de separación por columna cromatográfica permite la obtención de tintas de SWCNT enriquecidas en SWCNT metálicos y semiconductores. Las tintas de SWCNT resultantes de estos procesos se emplean para preparar películas que posteriormente se someten a tratamientos electroquímicos y procesado por láser, obteniéndose destrucción selectiva de SWCNT y control de los niveles de dopado. Se ha estudiado además la realización de tratamientos químicos a películas de SWCNT en sustratos flexibles para mejorar la adhesión y conseguir películas robustas, conductoras, transparentes y flexibles. Se acompaña toda esta investigación de estudios completos de caracterización por medio de técnicas coloidales, eléctricas, espectroscópicas, electroquímicas y microscópicas. Toda la metodología experimental se ha planificado y llevado a cabo teniendo en mente que se buscan procesos que puedan ser aplicados a nivel industrial para futuras aplicaciones comerciales. Por tanto los resultados que se presentan combinan ciencia básica centrada en generar nuevo conocimiento, junto con interés aplicado de esta ciencia básica que podría servir para desarrollar aplicaciones electrónicas y mejorar el desarrollo de dispositivos electrónicos basados en el uso de SWCNT y CNH., Gracias al proyecto de investigación europeo Graphene-based nanomaterials for touchscreen technologies: comprehension commerce and communication H2020-MSCA-ITN-2014-ETN 642742 (Enabling Excellence)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ growth and immobilization of CdS nanoparticles onto functionalized MoS2: preparation, characterization and fabrication of photoelectrochemical cells

  • Kagkoura, Antonia
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Tagmatarchis, Nikos
2 Esquemas, 5 Figuras.-- This is the pre-peer reviewed version of the following article: "In-situ growth and immobilization of CdS nanoparticles onto functionalized MoS2: preparation, characterization and fabrication of photoelectrochemical cell", Chemistry - an Asian Journal: 2019, which has been published in final form at https://doi.org/10.1002/asia.201901371. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions"., A facile strategy for the controllable growth of CdS nanoparticles at the periphery of MoS 2 en route the preparation of electron donor‐acceptor nanoensembles is developed. Precisely, the carboxylic group of α‐lipoic acid, as addend of the modified MoS 2 obtained upon 1,2‐dithiolane functionalization, was employed as anchor site for the in‐situ preparation and immobilization of the CdS nanoparticles in an one‐pot two‐step process. The newly prepared MoS 2 /CdS hybrid material was characterized by complementary spectroscopic, thermal and microscopy imaging means. Absorption spectroscopy was employed to register the formation of MoS 2 /CdS, by observing a broad shoulder centered at 420 nm due to CdS nanoparticles, while the excitonic bands of MoS 2 were also evident. Moreover, based on the efficient quenching of the characteristic fluorescence emission of CdS at 725 nm by the presence of MoS 2 , strong electronic interactions at the excited state between the two species within the ensemble were identified. Photoelectrochemical assays of MoS 2 /CdS thin‐film electrodes revealed a prompt, steady and reproducible anodic photoresponse during repeated on‐off cycles of illumination. A significant zero‐current photopotential of ‐540 mV and an anodic photocurrent of 1 μA were observed, underlining improved charge‐separation and electron transport from CdS to MoS 2 . The superior performance of the charge‐transfer processes in MoS 2 /CdS is of direct interest for the fabrication of photoelectrochemical and optoelectronic devices., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, which Submitted_Manuscript is implemented under the “Reinforcement of the Research and Innovation Infrastructures”, funded by the Operational Program "Competitiveness, Entrepreneurship and Innovation" (NSRF 2014-2020) and co-financed by Greece and the European Union (European Regional Development Fund) is also acknowledged. A.M.B. and W.K.M. acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R, AEI/FEDER, UE) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bottom-up synthesized MoS 2 interfacing polymer carbon nanodots with electrocatalytic activity for hydrogen evolution

  • Kagkoura, Antonia
  • Canton-Vitoria, Rubén
  • Vallan, Lorenzo
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
  • Tagmatarchis, Nikos
5 Figuras, 1 Esquema, 1 Tabla .-- Información suplementaria disponible en la página web del editor., The preparation of MoS 2 ‐polymer carbon nanodot (MoS 2 ‐PCND) hybrid material was accomplished by employing an easy and fast bottom‐up synthetic approach. Specifically, MoS 2 ‐PCND was realized by the thermal decomposition of ammonium tetrathiomolybdate and the in‐situ complexation of Mo with carboxylic acid units present in the surface of PCNDs. The newly prepared hybrid material was comprehensively characterized by spectroscopic, thermal and electron microscopy imaging means. The electrocatalytic activity of MoS 2 ‐PCND was examined against the hydrogen evolution reaction (HER) and compared with that attributed to the hybrid material prepared by a top‐down approach, namely with MoS 2 ‐PCND(exf‐fun), in which MoS 2 was firstly exfoliated and then covalently functionalized with PCNDs. The MoS 2 ‐PCND hybrid material showed superior electrocatalytic activity against HER with low Tafel slope value and excellent electrocatalytic stability, with an onset potential at ‐0.16 V vs RHE. The superior catalytic performance of MoS 2 ‐PCND was rationalized by considering the catalytic active sites of MoS 2 , the effective charge/energy‐transfer phenomena from PCNDs to MoS 2 and the synergetic effect between MoS 2 and PCNDs within the hybrid material., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, which is implemented under the “Reinforcement of the Research and Innovation Infrastructures”, funded by the Operational Program "Competitiveness, Entrepreneurship and Innovation" (NSRF 2014-2020) and co-financed by Ministry of Development and Investments, Greece, and the European Union (European Regional Development Fund) is also acknowledged. A.M.B. and W.K.M. acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R, AEI/FEDER, UE) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE). The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E13_17R) and from the European Union H2020 programs “ESTEEM3” (823717) and under the “Graphene Flagship” CORE2 project grant agreement No 785219., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One-pot preparation of iron/alumina catalyst for the efficient growth of vertically-aligned carbon nanotube forests

  • Roussey, Arthur
  • Venier, Nicolas
  • Fneich, Hussein
  • Giardella, Lucas
  • Pinaud, Thomas
  • Tahir, Saïd
  • Peláez-Fernández, Mario
  • Arenal, Raúl
  • Mehdi, Ahmad
  • Jourdain, Vincent
The catalytic growth of vertically-aligned carbon nanotubes (VA-CNTs) forest usually requires thin catalyst films deposited by multi-step and costly physical vapor deposition techniques. Here, we demonstrate that an efficient catalyst and its supporting layer for VACNT growth can be prepared by using a simple solution of Fe(NO3)3 and Al(NO3)3 deposited on silica in a single step. This process being much simpler and cheaper than existing preparation methods, it can easily be transferred to industry for the low-cost, thin and large-area coating of catalyst for VA-CNT growth. Our study shows that aluminum hydroxides preferentially react with the SiO2 surface while iron hydroxides tend to form oxide or hydroxide nanoparticles, thus allowing preparation of an aluminum-based buffer layer with iron-based nanoparticles at its surface. Optimization of the Fe/Al ratio and salt concentrations yielded catalysts with performances similar to standard Fe/Al2O3 catalysts prepared by physical vapor deposition., The Government of Aragon, and the European Social Fund are gratefully acknowledged. R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26). R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE). Part of this work has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sonochemical edge functionalisation of molybdenum disulfide

  • Amorim Graf, Aline
  • Large, Matthew J.
  • Ogilvie, Sean P.
  • Rong, Yuanyang
  • Lynch, Peter J.
  • Fratta, Giuseppe
  • Ray, Santanu
  • Shmeliov, Aleksey
  • Nicolosi, Valeria
  • Arenal, Raúl
  • King, Alice A. K.
  • Dalton, Alan B.
Liquid-phase exfoliation (LPE) has been shown to be capable of producing large quantities of high-quality dispersions suitable for processing into subsequent applications. LPE typically requires surfactants for aqueous dispersions or organic solvents with high boiling point. However, they have major drawbacks such as toxicity, aggregation during solvent evaporation or the presence of residues. Here, dispersions of molybdenum disulfide in acetone are prepared and show much higher concentration and stability than predicted by Hansen parameter analysis. Aiming to understand these enhanced properties, the nanosheets were characterised using UV-visible spectroscopy, zeta potential measurements, atomic force microscopy, Raman spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and scanning transmission microscopy combined with spatially-resolved electron energy loss spectroscopy. Also, the performance of the MoS2 nanosheets exfoliated in acetone was compared to that of those exfoliated in isopropanol as a catalyst for the hydrogen evolution reaction. The conclusion from the chemical characterisation was that MoS2 nanosheets exfoliated in acetone have an oxygen edge functionalisation, in the form of molybdenum oxides, changing its interaction with solvents and explaining the observed high-quality and stability of the resulting dispersion in a low boiling point solvent. Exfoliation in acetone could potentially be applied as a pretreatment to modify the solubility of MoS2 by edge functionalisation., The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA) – Universidad de Zaragoza (Spain). This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 642742 and under the “Graphene Flagship” project grant agreement no. 785219. R. A. also acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E13_17R). VN wishes to thank the support of SFI (AMBER and I-Form centres, PIYRA and US-Ireland grants) and the ERC CoG (3D2DPrint)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sulfur-doped graphene/transition metal dichalcogenide heterostructured hybrids with electrocatalytic activity toward the hydrogen evolution reaction

  • Kagkoura, Antonia
  • Peláez-Fernández, Mario
  • Arenal, Raúl
  • Tagmatarchis, Nikos
A facile route for the preparation of molybdenum disulfide (MoS2) and tungsten disulfide (WS2), uniformly deposited onto sulfur-doped graphene (SG), is reported. The realization of the SG/MoS2 and SG/WS2 heterostructured hybrids was accomplished by employing microwave irradiation for the thermal decomposition of ammonium tetrathiomolybdate and tetrathiotungstate, respectively, in the presence of SG. Two different weight ratios between SG and the inorganic species were used, namely 3 : 1 and 1 : 1, yielding SG/MoS2 (3 : 1), SG/MoS2 (1 : 1), SG/WS2 (3 : 1) and SG/WS2 (1 : 1). SG and all newly developed hybrid materials were characterized by ATR-IR and Raman spectroscopy, TGA, HR-TEM and EELS. The electrocatalytic activity of the SG/MoS2 and SG/WS2 heterostructured hybrids was examined against the hydrogen evolution reaction (HER) and it was found that the presence of SG not only significantly improved the catalytic activity of MoS2 and WS2 but also made it comparable to that of commercial Pt/C. Specifically, hybrids containing higher amounts of SG, namely SG/MoS2 (3 : 1) and SG/WS2 (3 : 1), exhibited extremely low onset overpotentials of 26 and 140 mV vs. RHE, respectively. The latter results highlighted the beneficial role of SG as a substrate for immobilizing MoS2 and WS2 and stressed its significance for achieving optimum electrocatalytic performance toward the HER. Finally, examination of the Tafel slopes as extracted from the electrocatalytic polarization curves, manifested the adsorption of hydrogen as the rate-limiting step for SG/MoS2 (3 : 1), while for SG/WS2 (3 : 1) the electrochemical desorption of adsorbed hydrogen atoms to generate hydrogen was revealed to be the rate-limiting step., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 642742. Partial support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014-2020) and co-financed by Greece and the European Union (European Regional Development Fund) is also acknowledged. The HR-TEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R. A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project MAT2016-79776-P (AEF/FEDER. UE), the Government of Aragon and ESF under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E13_17R), and from the EU H2020 program “Graphene Flagship” (Grant Agreement 785219)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multifunctional, biocompatible and pH-responsive carbon nanotube- and graphene oxide/tectomer hybrid composites and coatings

  • Garriga, Rosa
  • Jurewicz, Izabela
  • Seyedin, Shayan
  • Bardi, Niki
  • Totti, Stella
  • Matta-Domjan, Brigitta
  • Velliou, Eirini G.
  • Alkhorayef, Mohammed A.
  • Cebolla, Vicente L.
  • Razal, Joselito M.
  • Dalton, Alan B.
  • Muñoz, Edgar
12 Figuras, Here we present a route for non-covalent functionalization of carboxylated multi-walled carbon nanotubes and graphene oxide with novel two-dimensional peptide assemblies. We show that self-assembled amino-terminated biantennary and tetraantennary oligoglycine peptides (referred to as tectomers) effectively coat carboxylated multi-walled carbon nanotubes and also strongly interact with graphene oxide due to electrostatic interactions and hydrogen bonding as the driving force, respectively. The resulting hybrids can be made into free-standing conducting composites or applied in the form of thin, pH-switchable bioadhesive coatings onto graphene oxide fibers. Monitoring of cell viability of pancreatic cell lines, seeded on those CNT hybrids, show that they can be used as two- and three-dimensional scaffolds to tissue engineer tumour models for studying ex vivo the tumour development and response to treatment. This highly versatile method in producing pH-responsive hybrids and coatings offers an attractive platform for a variety of biomedical applications and for the development of functional materials such as smart textiles, sensors and bioelectronic devices., Authors thank the Fundación Domingo Martínez (Ayudas a la Investigación 2013), the Spanish Ministerio de Economía y Competitividad MINECO (Plan Nacional de I+D+I, Project CTQ2012-035535), DGA (Grupo Consolidado de Investigación Aplicada ref T08), CSIC Intramural Entorno Project, JMR ARC Future Fellowship (FT130100380), Engineering and Physical Sciences Research Council (EPSRC) grant no. EP/K031562, University of Sussex Strategic Development Fund, H2020-MSCA-ITN-2014 Enabling Excellence project, and the College of Applied Medical Sciences Research Center and the Deanship of Scientific Research at King Saud University for supporting this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene oxide and poly(3-hexylthiophene) nanoscale interface interactions probed by KPFM

  • Palacios-Lidón, E.
  • Colchero, J.
  • Istif, Emin
  • Benito, Ana M.
  • Maser, Wolfgang K.
Poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th August, Zaragoza (Spain)., Graphene oxide (GO) is a chemically modified form of graphene containing many different types of oxygen functional groups on its basal plane and edges. Their presence imparts hydrophilicity and allows for ease of processing from water dispersions. We recently have shown that sheets of graphene oxide critically affect the aggregate structure of water dispersible nanoparticles P3HTNPs and thus the performance of optoelectronic thin film devices. In this work we elucidate the photogenerated charge tranfer dynamics of (P3HTNPs-GO) ensembles with defined aggregate structure across their interface by Kelvin Probe Force microscopy (KPFM)., EU Horizon 2020 research and innovation programme Marie Sklodowska-Curie grant agreement No 642742. Project ENE2016-79282-C5-1-R. Grupo Reconocido DGA T03_17R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Nanostructured complexes of conducting polymers and graphene oxide

  • Istif, Emin
  • Vallan, Lorenzo
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Talk delivered at the 9th Nanodays Workshop on Advanced Materials, Munich (Germany), Sept. 13-15, 2017, Intrinsically conducting polymers form the base for the development of plastic electronic devices and hold great promise in optoelectronic applications such as thin film organic field-effect transitors, OLEDS and solar cells. Control of morphology and aggregation states by nanostructuring is essential for improving the device performance. In the last decade, research has focused on liquid phase assembly processes. These afford conjugated polymers in the form of nanoparticles or nanowires, which are dispersible in aqueous dispersions and allow for the fabrication of thin films with well-defined characteristics from environmentally-friendly solutions. Moreover, the liquid phase self-assembly processes provide unique opportunities for the development of novel composite materials with graphene based materials [1, 2]. Here we present our results of our recent work on the development of novel composite materials based of graphene oxide and poly (3-hexylthiophene) (P3HT) [3]. We show that liquid phase assembly processes in the presence of water-soluble graphene oxide sheets lead to the formation P3HT nanoparticles (P3HTNPs) in intimate contact with surrounding sheets of graphene oxide. During the synthesis, graphene oxide acts as a >good> solvent and induces important changes on the internal aggregation structure and the related interchain coupling. At the same time, the charge-transfer properties as a function of GO concentration are modified. Both effects are intimately coupled and lead to the stabilization of of P3HTNPs-GO donor-acceptor nanostructures offering improved charge transport and charge separation characteristics in thin films., Funding by EU (Project H2020-ITN 2014 642742), Spanish MINECO (ENE2013-48816-C5-5-R) and Government of Aragon (DGA-ESF-T66), is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Separación de nanotubos de carbono en metálicos y semiconductores: Análisis espectroscópico en medio disperso

  • Santidrián, Ana
  • Rubio-Muñoz, Cristina
  • Ansón-Casaos, Alejandro
  • Martínez Fernández de Landa, María Teresa
  • Benito, Ana M.
  • Maser, Wolfgang K.
2 figuras.-- Presentado en el Encuentro anual IberNAM 2015, "Empresas de Base Tecnológica en Micro-Nanosistemas: experiencias y oportunidades de colaboración”, Zaragoza, (España), 10-11 Diciembre 2015., El uso de gel para cromatografía, como Sephacryl, ha demostrado ser un método eficaz para separar nanotubos metálicos y semiconductores cuando la heterogénea muestra de partida de nanotubos de carbono es dispersada en surfactantes como el SDS. En el presente estudio se analizan las fracciones obtenidas por este método de separación por métodos espectroscópicos., Este trabajo ha sido financiado por el MINECO, el CSIC (proyecto intramural 2015801011), el Fondo Europeo de Desarrollo Regional (ENE2013-48816-C5-5-R), el Gobierno de Aragón, el Fondo Social Europeo (DGA-ESF-T66 Grupo Consolidado) y la Comisión Europea (H2020-MSCA-ITN-2014-ETNSEP-210139683 642742).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Carbon nanotubes meet graphene oxide: Efficient removal of chemisorbed water for enhanced electrode materials

  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Núñez, Jesús David
  • Rouzière, Stéphan
  • Launois, Pascale
  • Arenal, Raúl
  • Ajayan, Pulickel M.
Work presented at the 1st Workshop "Carbon Nanotubes Meet 2-Dimensional Materials", 2nd-4th November, 2016, Ruprecht Karls Universitat Heidelberg (Germany), Self-assembled graphene oxide (GO) papers are of increased interest for filtration, sensing and energy storage applications . The performance of the paper assemblies, especially upon thermal reduction treatments, is seriously affected by the presence of chemisorbed water, i.e. water molecules inherently bound to the oxygen functional groups (OFGs) of GO. In this work we show that oxidized multiwall carbon nanotubes (oCNTs) self-assembled onto GO sheets by an in-situ exfoliation process effectively can remove chemisorbed water and significantly reduce associated damaging effects., Funding by Spanish Ministry MINECO and European Regional Development Fund (Project ENE2013-48816-C5-5-R), the Government of Aragon and the European Social Fund (ProjectDGA-ESF-T66), and the EU (Project H2020-ITN 2014 642742) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ping‐pong energy transfer in covalently linked porphyrin‐MoS2 architectures

  • Canton-Vitoria, Rubén
  • Scharl, Tobias
  • Stergiou, Anastasios
  • Cadranel, Alejandro
  • Arenal, Raúl
  • Guldi, Dirk M.
  • Tagmatarchis, Nikos
Molybdenum disulfide nanosheets covalently modified with porphyrin were prepared and fully characterized. Neither the porphyrin absorption nor its fluorescence was notably affected by covalent linkage to MoS2. The use of transient absorption spectroscopy showed that a complex ping‐pong energy‐transfer mechanism, namely from the porphyrin to MoS2 and back to the porphyrin, operated. This study reveals the potential of transition‐metal dichalcogenides in photosensitization processes., This project has received funding from EC H2020 under the Marie Sklodowska‐Curie grant agreement No. 642742. HRSTEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016‐79776‐P (AEI/FEDER, UE) and from EC H2020 programs “Graphene Flagship” (785219), FLAG‐ERA—“GATES” (JTC‐PCI2018‐093137) and “ESTEEM3” (823717). R.A. also acknowledges Government of Aragon under the project “Construyendo Europa desde Aragon” 2014‐2020 (grant number E13_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pyrene coating transition metal disulfides as protection from photooxidation and environmental aging

  • Canton-Vitoria, Rubén
  • Sayed-Ahmad-Baraza, Yuman
  • Humbert, Bernard
  • Arenal, Raúl
  • Ewels, Christopher P.
  • Tagmatarchis, Nikos
This article belongs to the Section Nanocomposite Materials., Environmental degradation of transition metal disulfides (TMDs) is a key stumbling block in a range of applications. We show that a simple one-pot non-covalent pyrene coating process protects TMDs from both photoinduced oxidation and environmental aging. Pyrene is immobilized non-covalently on the basal plane of exfoliated MoS2 and WS2. The optical properties of TMD/pyrene are assessed via electronic absorption and fluorescence emission spectroscopy. High-resolution scanning transmission electron microscopy coupled with electron energy loss spectroscopy confirms extensive pyrene surface coverage, with density functional theory calculations suggesting a strongly bound stable parallel-stacked pyrene coverage of ~2–3 layers on the TMD surfaces. Raman spectroscopy of exfoliated TMDs while irradiating at 0.9 mW/4 μm2 under ambient conditions shows new and strong Raman bands due to oxidized states of Mo and W. Yet remarkably, under the same exposure conditions TMD/pyrene remain unperturbed. The current findings demonstrate that pyrene physisorbed on MoS2 and WS2 acts as an environmental barrier, preventing oxidative surface reactions in the TMDs catalyzed by moisture, air, and assisted by laser irradiation. Raman spectroscopy confirms that the hybrid materials stored under ambient conditions for two years remained structurally unaltered, corroborating the beneficial role of pyrene for not only hindering oxidation but also inhibiting aging., This research was funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742, under the “Graphene Flagship” project grant agreement No 785219 and under the ESTEEM-3 project grant agreement No 823717. This research was also partially funded by the project “Advanced Materials and Devices” (MIS 5002409), which is implemented under the “Action for the Strategic Development on the Research and Technological Sector” funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014–2020) and co-financed by Greece and the European Union (European Regional Development Fund). This work was supported by the COST Action CA15107 MultiComp. This research was also supported by the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E13_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laser-deposited carbon aerogel derived from graphene oxide enables NO2-selective parts-per-billion sensing

  • Nufer, Sebastian
  • Lynch, Peter J.
  • Large, Matthew J.
  • Ogilvie, Sean P.
  • Salvage, Jonathan P.
  • Peláez-Fernández, Mario
  • Waters, Thomas
  • Jurewicz, Izabela
  • Muñoz, Edgar
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Tagmatarchis, Nikos
  • Ewels, Christopher P.
  • Brunton, Adam
  • Dalton, Alan B.
4 figures., Laser-deposited carbon aerogel is a low-density porous network of carbon clusters synthesized using a laser process. A one-step synthesis, involving deposition and annealing, results in the formation of a thin porous conductive film which can be applied as a chemiresistor. This material is sensitive to NO2 compared to ammonia and other volatile organic compounds and is able to detect ultra-low concentrations down to at least 10 parts-per-billion. The sensing mechanism, based on the solubility of NO2 in the water layer adsorbed on the aerogel, increases the usability of the sensor in practically relevant ambient environments. A heating step, achieved in tandem with a microheater, allows the recovery to the baseline, making it operable in real world environments. This, in combination with its low cost and scalable production, makes it promising for Internet-of-Things air quality monitoring., This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 642742. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through Project Grant MAT2016-79776-P (AEI/FEDER, UE) and from the European Union H2020 programs “ESTEEM3” (823717), Flagship Graphene (881603), FLAG-ERA - Graphene (MICINN) GATES (PCI2018-093137). WKM and ABM further acknowledge the Gobierno de Aragon (Grupos Reconocidos DGA T03_17R (FEDER, UE) and T03_20R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Assessment of charge transfer phenomena in nanostructured composite materials using photoelectrochemical methods

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Abstract of talk delivered at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., Photoelectrochemistry is a valuable technique for the study of intrinsic electronic properties of a great variety of nanostructured semiconductor materials, such as conductive polymers or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors and carbon nanomaterials (GO, CNTs), unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as photoelectroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials, for their future application in fields related to energy and environment, such as water splitting, solar cells or water remediation. This versatility makes photoelectrochemistry a key tool in the field of carbon nanoscience and nanotechnology., MINEICO (project ENE2016-79282-C5-1-R, AEI/FEDER, UE), European Union (H2020-MSCA-ITN-2014-ETN 642742 ), Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

GO-ing on with graphene oxide

  • Maser, Wolfgang K.
  • Benito, Ana M.
HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual, in Benasque (Aragon, Spain)., Graphene oxide (GO) is an elusive but highly fascinating tunable nanostructure. Dispersible in aqueous solutions, it can be easily processed into macroscopic functional materials such as papers, aerogels and thin films for different kinds of applications. Equally, it can be used as versatile platform for the formation of functional hybrid optoelectronic materials. GO-ing on with GO research, we will present our latest findings on the use of GO as unique interface layer. We will demonstrate that GO can be employed in a controllable way to enable or block charge transfer in optoelectronic device structures. Emphasis is given on the unique and highly dynamic charge-transfer interface interactions established with conjugated polymers facilitating improved thin film operation of interest for optoelectronic device structures., Funding by EU (Project H2020-ITN 2014 642742), Spanish MINEICO (Project ENE2016-79282-C5-1-R, AEI/FEDER) and Government of Aragon (DGA-T03-17R, FEDER, UE), is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

In-situ graphene oxide thermal analyses via TEM/EELS: water desorption, reduction and graphitisation

  • Peláez-Fernández, Mario
  • Bermejo-Solís, Alba
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
1 figure.-- Talk delivered at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., For the last fifteen years, graphene oxide (GO) has become a material of great importance within the subject of chemically modified graphene (CDG) for its vast potential applications. However, both the chemical structure of Graphene oxide and the diverse processes taking place in thermal reduction of GO into reduced graphene oxide (RGO) are still not completely clear despite the sizable amount of studies concerning this issue. TEM and EELS, using a sample holder capable of heating samples up to 1200ºC within the TEM, is a unique and extensive technique for the analysis of the reduction of GO. Using this technique, we can measure, simultaneously and in situ, four main properties essential to this analysis at several intermediate temperatures and under high vacuum: the oxidation rate, its thickness, its mass density and its sp2-sp3 bond ratio. This study presents an analysis of GO by studying all of the aforementioned properties in two different studies: a first one heating up to 300ºC to better understand the physisorbed and chemisorbed water desorption, and a second one up to 1200ºC focused on the desorption of various oxygen functional groups; as well as the graphitisation of GO. Our results will be compared with previous studies on the matter., This work was supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), and European Union H2020 programs Marie Sklodowska-Curie Enabling Excellence (642742), ESTEEM3 (823717), Flag-ERA GATES (JTC - PCI2018-093137) and Graphene Flagship (785219).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

P3HT aggregation tuned by synergic interaction with different carbon nanostructures

  • Colom, E.
  • Istif, Emin
  • González Domínguez, José Miguel
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Talk delivered at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual, in Benasque (Aragon, Spain)., Poly(3-hexylthiophene) (P3HT) is one of the most popular conductive polymers for optoelectronic applications. [1] Their device operation critically depends on the nanocrystalline domain structure, i.e. the aggregate structure acquired by the polymer chains. Most common aggregates' distribution corresponds to H-aggregates, which implies charge transfer across the chains compared to those acquiring a J- aggregate structure with favorable charge transport along the chains. [2] We recently have shown that strong interactions between P3HT and water-dispersible graphene oxide can be obtained upon the formation of P3HT nanoparticles in aqueous dispersions. [3,4] These interactions enable a significant modification of the internal structure of P3HT aggregates towards a structure predominated by J-aggregates. Following this approach, in this work we have synthesized P3HT nanoparticles by the re-precipitation method in the presence of various types of water-soluble carbon nanostructures. Under scrutiny are graphene oxide flakes of different sizes, as well as nanocrystalline cellulose of type I and II. Of all the nanostructures exploited, the rarely investigated nanocyrstalline cellulose of type II, [5] exhibits significantly enhanced synergetic interface interactions with P3HT nanoparticles. This finding not only reveals a great potential towards improved thin film optoelectronic device structures, but even more underlines value of nanocellulose II for the development of green inks of photoactive polymers, ready to be used for printed electronics., Funding by EU (Project H2020-ITN 2014 642742), Spanish MINEICO (Project ENE2016-79282-C5-1-R1 (AEI/FEDER, UE), contract BES2017-080020 including FSE, UE, contract IJCI-2016-27789) and Government of Aragon (DGA-T03-17R and FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ reduction by Joule heating and measurement of electrical conductivity of graphene oxide in a transmission electron microscope

  • Hettler, Simon
  • Sebastián del Río, David
  • Peláez-Fernández, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
4 figures.-- Supporting information available on the website of the publisher., Graphene oxide (GO) is reduced by Joule heating using in-situ transmission electron microscopy (TEM). The approach allows the simultaneous study of GO conductivity by electrical measurements and of its composition and structural properties throughout the reduction process by TEM, electron diffraction and electron energy-loss spectroscopy. The small changes of GO properties observed at low applied electric currents are attributed to the promotion of diffusion processes. The actual reduction process starts from an applied power density of about 2 × 1014 Wm−3 and occurs in a highly uniform and localized manner. The conductivity increases more than 4 orders of magnitude reaching a value of 3 × 103 Sm−1 with a final O content of less than 1%. We discuss differences between the reduction by thermal annealing and Joule heating., S.H. and R.A. acknowledge funding by German Research Foundation (DFG project He 7675/1-1). Research supported by the Spanish MINECO and MICINN (MAT2016-79776-P,AEI/FEDER, EU; PID2019-104739GB-100/AEI/10.13039/501100011033; ENE2016-79282-C5-1-R, AEI/FEDER, EU and PID2019-104272RB-C51/AEI/10.13039/501100011033), Government of Aragon (projects DGA E13-17R (FEDER, EU); DGA T03-17R (FEDER, EU) and DGA T03-20R) and European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC - PCI2018-093137), ITN Enabling Excellence (MSCA-ITN) and Graphene Flagship (881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Achievements and perspectives on carbon nanotube conducting inks

  • Ansón-Casaos, Alejandro
  • Sanahuja-Parejo, Olga
  • Santidrián, Ana
  • Martínez Fernández de Landa, María Teresa
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del trabajo presentado al ChemOnTubes, celebrado en Bruselas (Bélgica) del 3 al 7 de abril de 2016., This work has been funded by MINECO and European Regional Development Fund (ENE2013-48816-C5-5-R NANOSOL-MAT), CSIC (project 2015801011 Intramural), Government of Aragón and European Social Fund (DGA-ESF-T66 Grupo Consolidado) and European Commission (H2020-MSCA-ITN-2014-ETN 642742 Enabling Excellence)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Influence of different variables on SWCNT sorting by gel chromatography

  • Santidrián, Ana
  • Ansón-Casaos, Alejandro
  • Martínez Fernández de Landa, María Teresa
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del póster presentado a la Carbon Nanoscience and Nanotechnology Conference (NanoteC), celebrada en Dublin (Irlanda) del 31 de agosto al 3 de septiembre de 2016., Typically, during the production of single-walled carbon nanotubes (SWCNTs), mixtures of various chirality species are synthesized. The electronic structure of SWCNTs, described by the chiral vector (n,m), determines their unique electrical and optical properties. Dueto these properties, SWCNTs have found potential applications in numerous fields. In many cases, the separation between semiconducting and metallic SWCNTs is needed for electronic applications. In the present work, we study process variables in the separation of SWCNTs by a gel chromatography method. Two types of SWCNTs were used: high-pressure carbon monoxide disproportionation (HiPco) SWCNTs and are discharge SWCNTs. Besides, in order to study the process selectivity dependence on the surface chemistry, the initial SWCNTs were functionalized. The experimental procedure of the chromatography column consisted of 3 steps: firstly, the SWCNTs were dispersed in a surfactant (sodium dodecyl sulfate (SDS) or pluronic F-68) in order to have a stable dispersion and avoid aggregation of SWCNTs. Different concentrations of the SWCNT initial dispersion were investigated (2, 1, 0.5, 0.25, 0.1 mglmq. Next, ultracentrifugation was performed to remove residual catalyst particles, amorphous carbon, and tube bundles. Once the SWCNTs are purified and individualized, Sephacryl gel was used to sort metallic and semiconducting SWCNTs. Different column lengths and retention times were investigated. Elution was done using a surfactant and the different fractions were collected sequentially. The collected fractions were characterized by Raman spectroscopy and absorption spectroscopy. The spectroscopy results show that the former fraction are enriched in SWCNTs in resonance via metallic transitions (E11M) and the latter fractions mainly contained SWCNTs in resonance via E22S. The results show that the technique effectively separates the SWCNTs. In addition, it was found that the selection process depends on the origin of the SWCNTs material and it is highly affected by the surface chemistry. Besides, the concentration of the raw SWCNTs dispersion and the length of the column play an important role towards the separation of single-chirality SWCNTs. The optimum conditions are reached by low SWCNT concentrations and long columns., This work has been funded by MINECO and European Regional Deve1opment Fund (ENE2013-48816-C5-5-R "NANOSOL-MAT"), CSIC (project 2015801011 "lntramural"), Government of Aragón and European Social Fund (DGA-ESF-T66 "Grupo Consolidado") and European Commission (H2020-MSCA-ITN-2014-ETN 642742 "Enabling Excellence")., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Three problems in carbon nanotube and graphene fluid dynamics

  • Ansón-Casaos, Alejandro
  • Sanahuja-Parejo, Olga
  • Rubio-Muñoz, Cristina
  • Santidrián, Ana
  • Martínez Fernández de Landa, María Teresa
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del trabajo presentado al Nanomath, celebrado en Toulouse (Francia) del 27 al 30 de junio de 2016., This work has been funcled by MINECO ancl Europea.n Regional Development Funcl (ENE2013-48816-C5-5-R "NANOSOL-MAT"), CSIC (project 2015801011 "Int.ramural"), Government of Aragón and European Social Fund (DGA-ESF-T66 "Grupo Consolidado") ancl European Commission (H2020-MSCA-ITN-2014-ETN 642742 "Enabling Excellcnce")., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Liquid phase Raman spectroscopy of carbon nanotubes sorted by gel chromatography

  • Santidrián, Ana
  • Ansón-Casaos, Alejandro
  • Martínez Fernández de Landa, María Teresa
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del póster presentado al ChemOnTubes, celebrado en Bruselas (Bélgica) del 3 al 7 de abril de 2016., Single-walled carbon nanotubes (SWCNTs) are considered as ene-dimensional (1 D) nanomaterials. The density of states (DOS) of 1 D materials is nota continuous function of energy, but it is confined in the so called van Hove singularities (vHSs). The electronic structure of SWCNTs, described by the chiral vector (n,m), determines their unique electrical and optical properties. Due to these properties, SWCNTs have found potential applications in numerous fields. In many cases, it would be desirable to have well-dispersed individualized SWCNTs. Besides, the separation between semiconducting and metallic SWCNTs is needed in electrical applications. In the present work, we study process variables in the separation of SWCNTs by a gel chromatography method. Firstly, the SWCNTs were dispersed in sodium dodecyl sulfate (SDS) in order to have a stable dispersion of SWCNTs and avoid aggregation of SWCNTs. Next, ultracentrifugation was effected to remove residual catalyst particles, amorphous carbon, and tube bundles. Once the SWCNTs are purified and individualized, Sephacryl gel was used to sort metallic and semiconducting SWCNTs. Elution was done using SDS, and the different fractions were collected in separated vials. In Figure 1, we observe the Raman spectra (Figure 1 a. and 1 b.) and absorption spectra (Figure 1 c.) of the separated fractions: raw SWCNTs (black line ), fraction 1 (red dashed line ), fraction 12 (green broken line), and fraction 17 (blue dotted line). The spectroscopy results show that the bands corresponding to SWCNTs in resonance via metallic transitions (E11 M) are more intense in the first fractions (Fr. 1) and bleached in the others (Fr. 12 and Fr. 17). The spectra of the following fractions (Fr. 12 and Fr. 17) present more intense bands in resonance via E22S. Therefore, the former fractions are enriched in metallic SWCNTs and the latter in semiconducting SWCNTs. The results show that the technique effectively separates the SWCNTs. In addition, it was found that the concentration of the raw SWCNTs dispersion plays an important role towards the separation of single-chirality SWCNTs., This work has been funded by MINECO and European Regional Development Fund (ENE2013-48816-C5-5-R "NANOSOL-MA T"), CSIC (project 2015801011 "lntramural"), Government of Aragón and European Social Fund (DGA-ESF-T66 "Grupo Consolidado") and European Commission (H2020-MSCA-ITN-2014-ETN 642742 "Enabling Excellence")., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Purificación de dispersiones acuosas de nanotubos de carbono de capa única mediante centrifugación

  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Martínez Fernández de Landa, María Teresa
Trabajo presentado a la XIV Reunión del Grupo Español del Carbón, celebrada en Málaga del 22 al 25 de Octubre de 2017., La presentación de este trabajo ha sido posible gracias a la financiación recibida de la Comisión Europea (H2020-MSCA-ITN-20 14-ETN 642742 "Enabling Excel lence"), el MINECO y el FEDR (ENE 2016-79282-CS-1-R) y el Gobierno de Aragón y el FSE (DGA-ESF-T66 "Grupo Consolidado")., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene oxide as versatile charge-transfer interface for improved optoelectronic materials

  • Maser, Wolfgang K.
  • Benito, Ana M.
Talk delivered at the 2019 Nano Applications Workshop, 17th-18th july 2019, München (Germany)., Graphene oxide (GO) is a highly defective chemically modified form of graphene containing many different types of oxygen functional groups on its basal plane and edges. Their presence imparts hydrophilicity and allows for easy processing from water dispersions. These facts constitute the base for their use as platforms for the formation of functional hybrid optoelectronic materials, Here GO serves as highly versatile interface layer which can be employed in a controllable way to allow or block charge transfer in optoelectronic materials. 1,2,3,4, thus contributing to improved thin film device performance. In this presentation, we will focus on the interaction of GO with conjugated polymers emphasizing the dynamic charge-transfer across the interface layer in different configurations., EU Horizon 2020 Marie Sklodowska-Curie grant 642742 ("Enabling Excellence"), Spanish Ministry MINEICO (ENE2016-79282-C5-1-R and ENE2016-79282-C5-4-R), Gobierno de Aragón (Recognized Group DGA-T03-17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

In-situ graphene oxide thermal behaviour via TEM/EELS: water desorption, reduction and graphitisation

  • Peláez-Fernández, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
1 figure.-- Abstract of the poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., Through the last decade, graphene oxide (GO) has become a material of growing importance within the realm of Chemically modified graphene (CDG) [1] for its many potential applications[2]. However, both the chemical structure of Graphene oxide and the diverse processes taking place in thermal reduction into reduced graphene oxide (RGO) are still not completely clear despite the amount of studies concerning this issue [2]. Electron energy loss spectroscopy, coupled with a sample holder capable of heating samples up to 1200°C, is a unique and extensive technique for the analysis of the reduction of GO. Using this technique, we can measure simultaneously four main properties essential to this analysis at any given temperature and under ultra high vacuum: the oxidation rate [3], its thickness [4], its mass density [5] and its sp2-sp3 bond ratio [6]. This study presents an analysis of GO and all the aforementioned properties in two different studies: one up to 300°C to better understand the physisorbed and chemisorbed water desorption, and a second one up to 1200°C focused on the reduction of GO by desorption of various oxygen functional groups; as well as the graphitisation of GO. Our results will be compared with previous studies on the matter., This work was supported by the EU MSCA project 642742, Research supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), Government of Aragon through project DGA E13_17R (FEDER, EU) and European Union H2020 programs "ESTEEM3" (823717) and Graphene Flagship (785219), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Photoelectrochemistry: a tool for the study of charge transfer at interfaces with carbon nanostructured materials

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Víctor-Román, Sandra
  • Benito, Ana M.
  • Maser, Wolfgang K.
Work presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., Photoelectrochemistry of nanomaterials is commonly employed in fields related to energy and environmental applications, such as water splitting, solar cells or water remediation. It is a valuable technique for the direct evaluation of the performance for the desired application. In addition, it can be used for the study of intrinsic electronic properties of nanostructured of a great variety of semiconductor materials, such as conductive polymers or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors and carbon nanomaterials (GO, CNTs), unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as electroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials. This versatility makes photoelectrochemistry a key tool in the field of carbon nanoscience and nanotechnology [1-4]., MINECO (project ENE2016-79282-C5-1-R), European Union (H2020-MSCA-ITN-2014-ETN 642742), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Charge transfer in nanostructured composite materials: a photoelectrochemical approach

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 Figure.-- Abstract of the work presented at "Current Trends in Electrochemistry", 41st Meeting of the Electrochemisty Group of the Spanish Royal Society of Chemistry, 1st French‐Spanish Atelier/Workshop on Electrochemistry, 6 - 9 July 2021, Paris (France)., Photoelectrochemical techniques are accurate for the study of intrinsic electronic properties of a great variety of nanostructured semiconductor materials, such as conductive polymers, carbon nanomaterials (GO, CNTs, CDs) or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as photoelectroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials, for their future application in fields related to energy and environment, such as water splitting, electronics, solar cells or water remediation. This versatility makes photoelectrochemistry a key tool in the field of nanoscience and nanotechnology., MINECO and AEI/FEDER/UE (project ENE2016-79282-C5-1-R), European Union (H2020-MSCAITN- 2014-ETN 642742), Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER/UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Toward laser-induced tuning of plasmonic response in high aspect ratio gold nanostructures

  • Peláez-Fernández, Mario
  • Majérus, Bruno
  • Funes-Hernando, Daniel
  • Dufour, Romain
  • Duvail, Jean-Luc
  • Henrard, Luc
  • Arenal, Raúl
High aspect-ratio gold nanostructures sustain Fabry–Perot-like surface plasmon responses from infrared to visible light energies. We show that some resonances can be tuned by means of laser irradiation, where low energy modes stay unperturbed. After laser irradiation, gold nanowires’ tips are transformed into nanoparticles of various sizes joint to gold nanowires, producing high aspect-ratio half-dumbbells and dumbbells structures. The plasmonic behaviour of both the nanowires and the newly created nanostructures has been characterised by in-depth monochromated electron energy loss spectroscopy (EELS) developed in a transmission electron microscope (TEM) and state-of-the-art discrete dipole approximation (DDA) calculations. All these analyses serve as experimental proof of the selective tuning (or robustness) of the plasmonic modes of the nanostructures in a specific spectral range, which is of critical interest regarding applications for sensing devices, nano-sources or nanophotonic waveguide, as well as optical remote control., Research supported by the Spanish MICINN(PID2019-104739GB-100/AEI/10.13039/501100011033), Government of Aragon (project DGA E13-20R) and European Union H2020 program “ESTEEM3” (823717), the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 642742, and the ARC research project No. 19/24-102 SURFASCOPE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Explosive percolation yields highly-conductive polymer nanocomposites

  • Meloni, Manuela
  • Large, Matthew J.
  • González Domínguez, José Miguel
  • Víctor-Román, Sandra
  • Fratta, Giuseppe
  • Istif, Emin
  • Tomes, Oliver
  • Savage, Jonathan P.
  • Ewels, Christopher P.
  • Peláez-Fernández, Mario
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • King, Alice A. K.
  • Ogilvie, Sean P.
  • Dalton, Alan B.
4 figures.-- The processed data used in this study are available in the Sussex Figshare database under https://doi.org/10.25377/sussex.21388851. Unprocessed data were available upon request from the corresponding author.-- Supplementary information available., Explosive percolation is an experimentally-elusive phenomenon where network connectivity coincides with onset of an additional modification of the system; materials with correlated localisation of percolating particles and emergent conductive paths can realise sharp transitions and high conductivities characteristic of the explosively-grown network. Nanocomposites present a structurally- and chemically-varied playground to realise explosive percolation in practically-applicable systems but this is yet to be exploited by design. Herein, we demonstrate composites of graphene oxide and synthetic polymer latex which form segregated networks, leading to low percolation threshold and localisation of conductive pathways. In situ reduction of the graphene oxide at temperatures of <150 °C drives chemical modification of the polymer matrix to produce species with phenolic groups, which are known crosslinking agents. This leads to conductivities exceeding those of dense-packed networks of reduced graphene oxide, illustrating the potential of explosive percolation by design to realise low-loading composites with dramatically-enhanced electrical transport properties., This work was funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 642742. A.B.D. acknowledges EPSRC Capital Award EP/S018069/1. W.K.M. and A.B. acknowledge support from Spanish MCIN/AEI under project PID2019-104272RB-C51/AEI/10.13039/501100011033 and the Government of Aragon (DGA) under project “Grupos Consolidados” T03-20R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Accurate determination of the chiral indices of individual carbon nanotubes by combining electron diffraction and Resonant Raman spectroscopy

  • Levshov, Dmitry I.
  • Tran, Huy Nam
  • Paillet, Matthieu
  • Arenal, Raúl
  • Than, Xuantinh
  • Zahab, Ahmed Azmi
  • Yuzyuk, Yu I.
  • Sauvajol, Jean Louis
  • Michel, Thierry
The experimental approach combining high resolution transmission electron microscopy (HRTEM), electron diffraction (ED) and resonant Raman spectroscopy (RRS) on the same free-standing individual carbon nanotubes (CNT) is the most efficient method to determine unambiguously the intrinsic features of the Raman-active phonons. In this paper, we review the main results obtained by the approach regarding the intrinsic features of the phonons of single-walled (SWNT) and double-walled carbon nanotubes (DWNT). First, we detail the different methods to identify the structure of SWNTs and DWNTs from the analysis of their electron diffraction patterns (EDP). In the following, we remind the principal features of the Raman response of SWNTs, unambiguously index-identified by ED. A special attention is devoted to the effect of the inter-layer interaction on the frequencies of the Raman-active phonons in index-identified DWNTs. The information obtained on index-identified SWNT and DWNT allows us to propose Raman criteria, which help identifying CNT when the ED fails to propose a single assignment. The efficiency of the Raman criteria as the complement to the ED information for the index-assignment of a few SWNTs and DWNTs is shown. The same approach to index-assign a triple-walled carbon nanotube (TWNT), by combining ED and RRS information, is reported., D. L. gratefully acknowledges financial support of Russian Science Foundation (grant number 15-12-10004). NT, MP, TM, AAZ, and JLS acknowledge financial support by the ANR GAMBIT project, grant ANR-13-BS10-0014 of the French Agence Nationale de la Recherche and the International project of Scientific Cooperation with Vietnam (CNRS PICS 6457). The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483 ESTEEM2 (Integrated Infrastructure Initiative – I3) and from the European Union H2020 program under the grant 696656 Graphene Flagship. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant FIS2013-46159-C3-3-P, from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26), and from the European Union H2020 program under the ETN project “Enabling Excellence” Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advanced spectroscopic analyses on a:C-H materials: Revisiting the EELS characterization and its coupling with multi-wavelength Raman spectroscopy

  • Lajaunie, Luc
  • Pardanaud, Cédric
  • Martin, Céline
  • Puech, Pascal
  • Hu, Cheng
  • Biggs, Mark James
  • Arenal, Raúl
Hydrogenated amorphous carbon thin films (a:C-H) are very promising materials for numerous applications. The growing of relevance of a:C-H is mainly due to the long-term stability of their outstanding properties. For improving their performances, a full understanding of their local chemistry is highly required. Fifteen years ago, electron energy-loss spectroscopy (EELS), developed in a transmission electron microscope (TEM), was the technique of choice to extract such kind of quantitative information on these materials. Other optical techniques, as Raman spectroscopy, are now clearly favored by the scientific community. However, they still lack of the spatial resolution offered by TEM-EELS. In addition, nowadays, the complexity of the physics phenomena behind EELS is better known. Here, a:C-H thin films have been isothermally annealed and the evolution of their physical and chemical parameters have been monitored at the local and macroscopic scales. In particular, chemical in-depth inhomogeneities and their origins are highlighted. Furthermore, a novel procedure to extract properly and reliably quantitative chemical information from EEL spectra is presented. Finally, the pertinence of empirical models used by the Raman community is discussed. These works demonstrate the pertinence of the combination of local and macroscopic analyses for a proper study of such complex materials., The TEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreements 312483- ESTEEM2 (Integrated Infrastructure Initiative – I3) and 604391 Graphene Flagship, as well as from EU H2020 Grant Agreement 696656 Graphene Flagship. R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragón” 2014-2020 (grant number E/26), and from EU H2020 ETN project “Enabling Excellence” Grant Agreement 642742. The support of the Australian Research Council's Linkage Infrastructure, Equipment and Facilities Program (LE130100119) is also gratefully acknowledged for funding the Horiba Labram Raman system., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Coaxial nanowires as plasmon-mediated remote nanosensors

  • Funes-Hernando, Daniel
  • Peláez-Fernández, Mario
  • Winterauer, D.
  • Mevellec, Jean Yves
  • Arenal, Raúl
  • Batten, T.
  • Humbert, Bernard
  • Duvail, Jean-Luc
This study reports on the plasmon-mediated remote Raman sensing promoted by specially designed coaxial nanowires. This unusual geometry for Raman study is based on the separation, by several micrometres, of the excitation laser spot, on one tip of the nanowire, and the Raman detection at the other tip. The very weak efficiency of Raman emission makes it challenging in a remote configuration. For the proof-of-concept, we designed coaxial nanowires consisting of a gold core to propagate surface plasmon polaritons and a Raman-emitting shell of poly(3,4-ethylene-dioxythiophene). The success of the fabrication was demonstrated by correlating, for the same single nanowire, a morphological analysis by electron microscopy and Raman spectroscopy analysis. Importantly for probing the remote-Raman effect, the original hard template-based process allows one to control the location of the polymer shell all along the nanowire, or only close to one or the two nanowire tips. Such all-in-one single nanowires could have applications in the remote detection of photo-degradable substances and for exploring 1D nanosources for integrated photonic and plasmonic systems., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. The STEM-EELS studies have been conducted in the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA)-Universidad de Zaragoza (Spain), Spanish ICTS National facility. R. A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design and development of multi-walled carbon nanotube-liposome drug delivery platforms

  • Pippa, Natassa
  • Fernández-Pacheco, Rodrigo
  • Arenal, Raúl
  • Tagmatarchis, Nikos
The aim of this study is to design and develop delivery platforms made of liposomes and multi-walled carbon nanotubes (MWCNTs). We used different lipids with different main transition temperature (Tm) and differently functionalized MWCNTs with organic addends possessing either positive or negative charge. The phospholipids used for the formulations were 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) (Tm = 41 °C) and L-α-phosphatidylcholine, hydrogenated Soy (HSPC) (Tm = 53 °C). By Differential Scanning Calorimetry (DSC), we studied the interaction between the DPPC and HSPC bilayers and MWCNTs. Liposome-MWCNTs delivery platforms prepared according to the protocol used in the literature. We used dynamic and electrophoretic light scattering in order to investigate the physicochemical characteristics of these mixed nanocarriers. The presence of MWCNTs causes alterations of the size of the conventional HSPC and DPPC liposomes. The ζ-potential values of mixed nanocarriers are near zero. This observation indicates the effective incorporation of MWCNTs into the lipid bilayer of liposomes. Fluorescence spectroscopy has been utilized to exact some qualitative information on the internal nanostructure and nanoenvironment of the lipid/carbon nanotube mixed structures. Finally, we conclude that we successfully prepare and completely characterize mixed nanocarriers composed of lipids and MWCNTs, with low toxicity as indicated by in vitro screening., The cryo-TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. The Government of Aragon, and the European Social Fund are gratefully acknowledged. R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26). R.A. and R.F.-P. gratefully acknowledge the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE).Partial funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant agreement No 642742 is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering microencapsulation of highly catalytic gold nanoclusters for an extreme thermal stability

  • Sousa-Castillo, Ana
  • Gauthier, Sébastien
  • Arenal, Raúl
  • Pérez-Lorenzo, Moisés
  • Correa-Duarte, Miguel A.
A synthetic strategy for the microencapsulation of ultra-small gold nanoparticles toward the development of a novel nanoreactor is reported. In this case, it is shown that the catalytic activity of Au nanoclusters as small as 0.8 nm remains unaffected after a thermal treatment up to 800 °C in air. This is accomplished through the deposition and further coating of the gold nanoparticles in a void/silica/Au/silica configuration where the nature of the alternate shells can be tuned regardless of each other's porosity and the size of the embedded metal nanoparticles. Such spatial confinement suppresses the growth of the gold nanoclusters and thus preserves their catalytic properties. In this way, a remarkable compromise between the immobilization and the accessibility to the metal nanocatalyst can be met. Furthermore, these nanoreactors are found to be colloidally stable in simulated body fluids which also makes them suitable for biomedical applications. The implementation of hollow nanoreactors containing highly dispersed and immobilized but accessible ultra-small metal nanoparticles constitutes a promising alternative in the search for model catalysts stable under realistic technical conditions., This work was funded by Xunta de Galicia (INBIOMED-FEDER “unha maneira de facer Europa” and EM2014/035), Fundación Ramón Areces, Fundación Tatiana Pérez de Guzmán el Bueno, and European Union Seventh Framework Programme [FP7/REGPOT-2012-2013.1] under Grant Agreement no. 316265, BIOCAPS. The scanning transmission electron microscopy (STEM) studies were conducted at Laboratorio de Microscopías Avanzadas (LMA) at Instituto de Nanociencia de Aragón (INA) – Universidad de Zaragoza (Spain). The STEM measurements were supported by the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3). R. A. acknowledges funding from MINECO-Spain (FIS2013-46159-C3-3-P) and EU-H2020 project ITN-Enabling Excellence (Grant number 642742)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Excitonic optical transitions characterized by Raman excitation profiles in single-walled carbon nanotubes

  • Tran, Huy Nam
  • Blancon, Jean Christophe
  • Arenal, Raúl
  • Popov, Valentin N.
  • Ayari, Anthony
  • San Miguel, Alfonso
  • Vallèe, Fabrice G.
  • Fatti, Natalia del
  • Sauvajol, Jean Louis
  • Paillet, Matthieu
We examine the excitonic nature of the 𝐸33 optical transition of the individual free-standing index-identified (23,7) single-walled carbon nanotube by means of the measurements of its radial-breathing-mode and 𝐺-mode Raman excitation profiles. We confirm that it is impossible to determine unambiguously the nature of its 𝐸33 optical transition (excitonic vs band to band) based only on the excitation profiles. Nevertheless, by combining Raman scattering, Rayleigh scattering, and optical absorption measurements on strictly the same individual (23,7) single-walled carbon nanotube, we show that the absorption, Rayleigh spectra, and Raman excitation profiles of the longitudinal and transverse 𝐺 modes are best fitted by considering the nature of the 𝐸33 transition as excitonic. The fit of the three sets of data gives close values of the transition energy 𝐸33 and damping parameter Γ33. This comparison shows that the fit of the Raman excitation profiles provides with good accuracy the energy and damping parameter of the excitonic optical transitions in single-walled carbon nanotubes., H.N.T., M.P., A.A.Z., J.-L.S., and J.-R.H. acknowledge financial support from the ANR GAMBIT project, Grant No. ANR-13-BS10-0014 of the French Agence Nationale de la Recherche, and the International project of Scientific Cooperation with Vietnam (CNRS PICS 6457). We acknowledge the Dr. T. X. Tinh for the synthesis of individual nanotubes. J.-C.B., A.A., A.S.-M., F.V and N.D.F. acknowledge financial support from ANR programme P2N under Contract No. ANR11-NANO-025. V.N.P. acknowledges financial support from Project 316309: INERA - “Research and Innovation Capacity Strengthening of ISSP-BAS in Multifunctional Nanostructures.” The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement No. 312483- ESTEEM2 (Integrated Infrastructure Initiative -I3). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from the European Union H2020 program ETN project “Enabling Excellence” Grant Agreement No. 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exfoliated semiconducting pure 2H-MoS2 and 2H-WS2 assisted by chlorosulfonic acid

  • Pagona, Georgia
  • Bittencourt, Carla
  • Arenal, Raúl
  • Tagmatarchis, Nikos
Chlorosulfonic acid assisted the exfoliation of MoS2 and WS2 resulting in retaining their semiconducting 2H-phase, sharply contrasting the semiconducting-to-metallic phase-transition observed with the currently available exfoliation techniques., CB is a research associate at the National Fund for Scientific Research (FRS-FNRS, Belgium). Financial support from FRS-FNRS under contract 2.4577.11 (Chemographene) is acknowledged. The HR-STEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain and supported by EU FP7 under Grant Agreements 312483 – ESTEEM2 (Integrated Infrastructure Initiative – I3) and 604391 Graphene Flagship. RA acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P). RA and NT acknowledge financial support from the EU H2020 ETN project “Enabling Excellence” under Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Functionalization of MoS2 with 1,2-dithiolanes: toward donor-acceptor nanohybrids for energy conversion

  • Canton-Vitoria, Rubén
  • Sayed-Ahmad-Baraza, Yuman
  • Peláez-Fernández, Mario
  • Arenal, Raúl
  • Bittencourt, Carla
  • Ewels, Christopher P.
  • Tagmatarchis, Nikos
The covalent functionalization of exfoliated semiconducting MoS2 by 1,2-dithiolanes bearing an ethylene glycol alkyl chain terminated to a butoxycarbonyl-protected amine and a photoactive pyrene moiety is accomplished. The MoS2-based nanohybrids were fully characterized by complementary spectroscopic, thermal, and microscopy techniques. Markedly, density functional theoretical studies combined with X-ray photoelectron spectroscopy analysis demonstrate preferential edge functionalization, primarily via sulfur addition along partially sulfur saturated zig-zag MoS2 molybdenum-edges, preserving intact the 2D basal structure of functionalized MoS2-based nanohybrids as confirmed by high-resolution transmission electron microscopy and electron energy loss spectroscopy. Furthermore, in the MoS2-pyrene hybrid, appreciable electronic interactions at the excited state between the photoactive pyrene and the semiconducting MoS2 were revealed as inferred by steady-state and time-resolved photoluminescence spectroscopy, implying its high potentiality to function in energy conversion schemes., This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant agreement No 642742. C.B. is a research associate of FRS-FNRS. TEM studies were conducted at the Laboratorio de Microscopías Avanzadas, Instituto de Nanociencia de Aragón, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union FP7 under Grant agreements 312483- ESTEEM2 (Integrated Infrastructure Initiative—I3). The Government of Aragon, and the European Social Fund are gratefully acknowledged. R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26) and the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grants FIS2013-46159-C3-3-P and MAT2016-79776-P (AEI/FEDER, UE), as well as from the European Union H2020 program “Graphene Flagship”, Grant Agreement 696656., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hierarchical nanoplatforms for high-performance enzyme biocatalysis under denaturing conditions

  • González-Domínguez, Elena
  • Arenal, Raúl
  • Pérez-Lorenzo, Moisés
  • Correa-Duarte, Miguel A.
et al., A hierarchically structured nanoplatform comprising the integration of enzymes into a hybrid carbon-nanotube-based magnetic nanocomposite was developed. By means of this complex support, laccases are endowed with exceptional performance even in fully denaturing environments. In this regard, up to 10-fold enhancements in the biocatalytic activity of the enzymes can be attained at different temperatures and pH conditions. Furthermore, these platforms are found to provide laccases with unprecedented recycling potential. In this line, these composites allow straightforward recovery and reuse of the biocatalysts with no loss of efficiency even after 10 successive runs. These outstanding operational capabilities make these nanocarriers a promising material to tackle the challenges associated with the implementation of enzymes in industrial biotechnology., This work was funded by Xunta de Galicia (INBIOMED-FEDER “unha maneira de facer Europa”, EM2014/035, and EM2014/041), MINECO-Spain (CTM2014-58481-R), Fundación Ramón Areces, Fundación Tatiana Pérez de Guzmán el Bueno, and European Union Seventh Framework Programme [FP7/REGPOT-2012-2013.1] under Grant Agreement no. 316265, BIOCAPS. The scanning transmission electron microscopy (STEM) and aberration-corrected TEM studies were conducted at Laboratorio de Microscopías Avanzadas (LMA) at Instituto de Nanociencia de Aragón (INA)—Universidad de Zaragoza (Spain). The STEM measurements were supported by European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3). R.A. acknowledges funding from MINECO-Spain (FIS2013-46159-C3-3-P) and EU-H2020 project ITN-Enabling Excellence (Grant Number 642742)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanotubes from oxide-based misfit family: The case of calcium cobalt oxide

  • Panchakarla, Leela S.
  • Lajaunie, Luc
  • Ramasubramaniam, Ashwin
  • Arenal, Raúl
  • Tenne, Reshef
Misfit layered compounds (MLCs) have generated significant interest in recent years as potential thermoelectric materials. MLC nanotubes could reveal behavior that is entirely different from the bulk material. Recently, new chemical strategies were exploited for the synthesis of nanotubular forms of chalcogenide-based MLCs, which are promising candidates for thermoelectric materials. However, analogous synthesis of oxide-based MLC nanotubes has not been demonstrated until now. Here, we report a chemical strategy for synthesis of cobalt-oxide-based misfit nanotubes. A combination of high-resolution (scanning) transmission electron microscopy (including image simulations), spatially resolved electron energy-loss spectroscopy, electron diffraction, and density functional theory (DFT) calculations is used to discover the formation of a phase within these nanotubes that differs significantly from bulk calcium cobaltite MLCs. Furthermore, DFT calculations show that this phase is semiconducting with a band gap in excess of 1 eV, unlike bulk calcium cobaltite MLCs, which are known to be metallic. Through systematic experiments, we propose a formation mechanism for these nanotubes that could also apply more generally to realizing other oxide-based MLC nanotubes., The Israel Science Foundation (grant 265/12); the H. Perlman Foundation; the Irving and Azelle Waltcher Foundations in honor of Prof. M. Levy; and the Irving and Cherna Moskowitz Center for Nano and Bio-Nano Imaging are acknowledged. L.S.P. thanks the PBC Program of the Government of Israel and the Dean of the chemistry faculty, Weizmann Institute of Science, for a postdoctoral fellowship. The STEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative – I3) and from the European Union H2020 Grant Agreement 696656 Graphene Flagship. R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from the European Union H2020 program ETN project “Enabling Excellence” Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the advantages of spring magnets compared to pure FePt: Strategy for rare-earth free permanent magnets following a bottom-up approach

  • Pousthomis, M.
  • Arenal, Raúl
  • Lacroix, Lise-Marie
Nanostructured magnets benefiting from efficient exchange-coupling between hard and soft grains represent an appealing approach for integrated miniaturized magnetic power sources. Using a bottom-up approach, nanostructured materials were prepared from binary assemblies of bcc FeCo and fcc FePt nanoparticles and compared with pure L10-FePt materials. The use of a bifunctional mercapto benzoic acid yields homogeneous assemblies of the two types of particles while reducing the organic matter amount. The 650 °C thermal annealing, mandatory to allow the L10-FePt phase transition, led to an important interdiffusion and thus decreased drastically the amount of soft phase present in the final composites. The analysis of recoil curves however evidenced the presence of an efficient interphase exchange coupling, which allows obtaining better magnetic performances than pure L10 FePt materials, energy product above 100 kJ m−3 being estimated for a Pt content of only 33%. These results clearly evidenced the interest of chemically grown nanoparticles for the preparation of performant spring-magnets, opening promising perspective for integrated subcentimetric magnets with optimized properties., A partial support was obtained through the grant NEXT n° ANR-10-LABX-0037 in the framework of the “Programme des Investissements d’Avenir” and by the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3). R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from the European Union H2020 program ETN Marie Sklodowska-Curie project Grant Agreement 642742. We gratefully acknowledge the European Associated Laboratory (LEA)-TALEM2 for financial support. The aberration-corrected HR-STEM studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA) at Instituto de Nanociencia de Aragon (INA), Universidad de Zaragoza, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Oxidation-assisted graphene heteroepitaxy on copper foil

  • Reckinger, Nicolas
  • Tang, Xiaohui
  • Joucken, Frédéric
  • Lajaunie, Luc
  • Arenal, Raúl
  • Dubois, Emmanuel
  • Hackens, Benoît
  • Henrard, Luc
  • Colomer, Jean-François
We propose an innovative, easy-to-implement approach to synthesize aligned large-area single-crystalline graphene flakes by chemical vapor deposition on copper foil. This method doubly takes advantage of residual oxygen present in the gas phase. First, by slightly oxidizing the copper surface, we induce grain boundary pinning in copper and, in consequence, the freezing of the thermal recrystallization process. Subsequent reduction of copper under hydrogen suddenly unlocks the delayed reconstruction, favoring the growth of centimeter-sized copper (111) grains through the mechanism of abnormal grain growth. Second, the oxidation of the copper surface also drastically reduces the nucleation density of graphene. This oxidation/reduction sequence leads to the synthesis of aligned millimeter-sized monolayer graphene domains in epitaxial registry with copper (111). The as-grown graphene flakes are demonstrated to be both single-crystalline and of high quality., The research leading to this work received funding from the European Union Seventh Framework Program under grant agreement No 604391 Graphene Flagship. The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Some of the research leading to these results has also received funding from the European Union Seventh Framework Programme under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative – I3), as well as from EU H2020 ETN project “Enabling Excellence” Grant Agreement 642742 and the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P). This work is partially supported by the Multi-Sensor-Platform for Smart Building Management project (No. 611887). This research used resources of the Electron Microscopy Service at the University of Namur (“Plateforme Technologique Morphologie – Imagerie”). This research also used resources of the ELISE Service of the University of Namur. This service is member of the “Plateforme Technologique SIAM”. Part of this work was financially supported by the Actions de Recherche Concertées (ARC) “StressTronics” and “NATURIST”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photoluminescence from an individual double-walled carbon nanotube

  • Levshov, Dmitry I.
  • Parret, Romain
  • Tran, Huy Nam
  • Michel, Thierry
  • Cao, Thi Thanh
  • Nguyen, Van Chuc
  • Arenal, Raúl
  • Popov, Valentin N.
  • Rochal, Sergei B.
  • Sauvajol, Jean Louis
  • Zahab, Ahmed Azmi
  • Paillet, Matthieu
We report direct and unambiguous evidence of the existence of inner semiconducting tube (ISCT) photoluminescence (PL) from measurements performed on four individual freestanding index-identified double-walled carbon nanotubes (DWNTs). Based on thorough Rayleigh scattering, Raman scattering, and PL experiments, we are able to demonstrate that the ISCT PL is observed with a quantum yield estimated to be a few 10−6 independent of the semiconducting or metallic nature of the outer tube. This result is mainly attributed to ultrafast exciton transfer from the inner to outer tube. Furthermore, by carrying out PL excitation experiments on the (14,1)@(15,12) DWNT, we show that the ISCT PL can be detected through the optical excitation of the outer tube, indicating that the exciton transfer can also occur in the opposite way., D.I.L. and S.B.R. gratefully acknowledge financial support from the Russian Science Foundation (Grant No. 15-12-10004). R.P., J.-L.S., A.-A.Z., and M.P. acknowledge financial support from the ANR GAMBIT project, Grant No. ANR-13-BS10-0014 of the French Agence Nationale de la Recherche, and the International Project of Scientific Cooperation with Vietnam (CNRS PICS 6457). V.C.N. acknowledges financial support from the Vietnamese National Foundation for Science and Technology Development (Grant No.103.99-2016.19). R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014–2020 (Grant No. E/26) and the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through Project Grant No. MAT2016-79776-P (AEI/FEDER, UE). The research leading to these results has received funding from the EU H2020 programs ETN Grant Agreement No. 642742. The TEM studies were conducted at the Laboratorio de Microscopías Avanzadas, Instituto de Nanociencia de Aragón, Universidad de Zaragoza, Spain. The government of Aragon and the European Social Fund are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pingpong-Energietransfer in kovalent verknüpften Porphyrin-MoS2-Architekturen

  • Canton-Vitoria, Rubén
  • Scharl, Tobias
  • Stergiou, Anastasios
  • Cadranel, Alejandro
  • Arenal, Raúl
  • Guldi, Dirk M.
  • Tagmatarchis, Nikos
Molybdändisulfid-Nanoschichten wurden mit Porphyrin kovalent modifiziert und vollständig charakterisiert. Weder die Porphyrin-Absorption noch die Fluoreszenz wurden durch die kovalente Bindung an MoS2 merklich beeinflusst. Mithilfe transienter Absorptionsspektroskopie konnte jedoch ein komplexer Pingpong-Energietransfer-Mechanismus, nämlich vom Porphyrin zum MoS2 und wieder zurück zum Porphyrin, bestätigt werden. Diese Studie zeigt das Potential von Übergangsmetalldichalkogeniden bei Photosensibilisierungsprozessen auf., Dieses Projekt wurde im Rahmen des Marie-Sklodowska-Curie-Fördervertrags Nr. 642742 von der EC H2020 finanziert. HRSTEM- und EELS-Studien wurden am Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universität Saragossa, Spanien, durchgeführt. R.A. bedankt sich bei dem spanischen Ministerium für Wirtschaft und Wettbewerbsfähigkeit (MINECO) für die Unterstützung durch die Projektförderung MAT2016-79776-P (AEI/ FEDER, UE) und durch die EC-H2020-Programme “Graphen Flagship” (785219), FLAG-ERA – “GATES” (JTC-PCI2018-093137) und “ESTEEM3” (823717). A.C. bedankt sich bei ALN für die Unterstützung in Argentinien., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Plasmonic properties of an Ag@Ag2Mo2O7 hybrid nanostructure easily designed by solid-state photodeposition from very thin Ag2Mo2O7 nanowires

  • Hakouk, Khadija
  • Lajaunie, Luc
  • El Bekkachi, Houda
  • Serier-Brault, Hélène
  • Humbert, Bernard
  • Arenal, Raúl
  • Dessapt, Rémi
A new Ag@m-Ag2Mo2O7 plasmonic hybrid nanostructure was designed by an easy two-step synthesis method. Firstly, very thin photosensitive monoclinic m-Ag2Mo2O7 nanowires (NWs) were synthesized under ambient pressure and at low temperature by using Ag2Mo3O10·2H2O NWs as a pre-nanostucturated starting material. This innovative soft chemistry route offers some precise control over the purity, the structure and the nanostructuration of the m-Ag2Mo2O7 NWs that exhibit a very thin diameter of around 100 nm and a superior specific surface area compared to previously reported synthesis methods. Secondly, the plasmonic hybrid nanostructure Ag@m-Ag2Mo2O7 was easily in situ obtained via an all solid-state photodeposition method, by irradiating the m-Ag2Mo2O7 NWs under low energy and low-power UV-light. The composition, morphology and plasmonic properties of the nanocomposite were investigated by a combination of energy-dispersive X-ray spectroscopy, high-resolution scanning transmission electron microscopy, X-ray photoelectron spectroscopy and Auger spectroscopy, and near-infrared, Raman and UV-vis spectroscopies as well as spatially-resolved electron energy-loss spectroscopy. A plausible mechanism explaining the formation of the nano-heterostructure under irradiation was also discussed. The Ag@m-Ag2Mo2O7 nanostructure manifests interesting plasmonic properties particularly high surface-enhanced Raman scattering (SERS) sensitivity probed using 2,2′-bipyridine., R. A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26) and from the European Union H2020 program ETN project “Enabling Excellence” Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preserving π-conjugation in covalently functionalized carbon nanotubes for optoelectronic applications

  • Setaro, Antonio
  • Adeli, Mohsen
  • Glaeske, Mareen
  • Przyrembel, Daniel
  • Bisswanger, Timo
  • Gordeev, Georgy
  • Maschietto, Federica
  • Faghani, Abbas
  • Paulus, Beate
  • Weinelt, Martin
  • Arenal, Raúl
  • Haag, Rainer
  • Reich, Stephanie
Covalent functionalization tailors carbon nanotubes for a wide range of applications in varying environments. Its strength and stability of attachment come at the price of degrading the carbon nanotubes sp2 network and destroying the tubes electronic and optoelectronic features. Here we present a non-destructive, covalent, gram-scale functionalization of single-walled carbon nanotubes by a new [2+1] cycloaddition. The reaction rebuilds the extended π-network, thereby retaining the outstanding quantum optoelectronic properties of carbon nanotubes, including bright light emission at high degree of functionalization (1 group per 25 carbon atoms). The conjugation method described here opens the way for advanced tailoring nanotubes as demonstrated for light-triggered reversible doping through photochromic molecular switches and nanoplasmonic gold-nanotube hybrids with enhanced infrared light emission., We gratefully acknowledge the German Research Foundation (DFG via SFB 658, subprojects A6, B7 and Z) and the Focus Area NanoScale of the Freie Universität Berlin for financial support. We thank S. Selve of the ZELMI (Technical University of Berlin) for the TEM measurements of the Au@SWNT hybrids, and A. Wimmer and K. Huth for their support. High-resolution STEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. acknowledges the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P), the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26), the European Union Seventh Framework Program under Grant Agreements 312483- ESTEEM2 (Integrated Infrastructure Initiative – I3) and 604391 and 696656 Graphene Flagship, as well as from EU H2020 ETN project “Enabling Excellence” Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pyrene-functionalized tungsten disulfide as stable resistive photosensor

  • Canton-Vitoria, Rubén
  • Nufer, Sebastian
  • Che, Xiaoyang
  • Sayed-Ahmad-Baraza, Yuman
  • Arenal, Raúl
  • Bittencourt, Carla
  • Brunton, Adam
  • Dalton, Alan B.
  • Ewels, Christopher P.
  • Tagmatarchis, Nikos
Pyrene carrying an 1,2-dithiolane linker was employed to functionalize exfoliated WS2 and the resulting material was used in a proof-of-concept application as a photoresistor type sensor. The WS2–pyrene hybrid material was comprehensively characterized by spectroscopic, thermal and microscopy techniques, coupled to density functional theory modelling. The high solubility of the WS2–pyrene hybrid material allows easy manipulation in wet media, making it suitable for device fabrication. Thus, a two-terminal resistive photosensor was developed and tested for photodetection. The photosensitivity of WS2 was improved by the presence of covalently attached pyrene by a factor of 2–3, the response linearly dependent on light intensity. Device reaction time was also improved, and critically the photosensor stability was significantly enhanced. Functionalization of exfoliated WS2 material heals vacancies, oxidation and other damage sites liable to impede photoelectric response. This proof-of-concept study opens the way for incorporation of diverse chromophores active in the visible and/or NIR region of the electromagnetic spectrum to WS2 in order to stabilise it and broaden its photoresistive sensing applicability., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 642742, under the “Graphene Flagship” project grant agreement no. 881603 and under the “ESTEEM3” project grant agreement no. 823717. Partial support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector” funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014–2020) and co-financed by Greece and the European Union (European Regional Development Fund) is also acknowledged. The HRSTEM and SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R. A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the MICINN (PID2019-104739GB-I00), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E13_17R). CB is research associate of FNRS-Belgium., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Radial collapse of carbon nanotubes for conductivity optimized polymer composites

  • Balima, Félix
  • Arenal, Raúl
  • San Miguel, Alfonso
F. Balima et al., The optimization of the electronic conduction of carbon nanotube polymer composites is studied by tuning the radial geometry of the carbon nanotubes in a compression cycle. We have investigated the structural evolution of multi-walled carbon nanotubes in a polyamide matrix as a function of applied high pressure. Combining high resolution electron microscopy and small angle neutron scattering experiments, we conclude that the nanotube radial cross-section is irreversibly deformed following applied pressures up to 5 GPa. Studying highly percolated composites we observe that the sample resistivity drastically decreases with pressure up to about 2 GPa with no further change up to the maximum 5 GPa applied pressure. An important hysteresis is observed upon decompression which leads to an enhanced electrical conductivity of the composite in all the studied compression cycles with maximum pressures ranging from 1 to 5 GPa. Modelling the radial collapse of single-walled carbon nanotubes shows that the modified radial geometry can considerably improve the electronic transport properties in contacted carbon nanotube junctions. Our results open opportunities for engineering nanotube composites by controlling the radial collapse., We acknowledge financial support by the ANR program P2N under Contract ANR-11-NANO-025 “TRI-CO”. We are indebted to the Arkema company for providing samples and associated information. We acknowledge technical support of F. Legrand (ILM, Lyon). The transmission electron microscopy studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA) - Universidad de Zaragoza (Spain). R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P). The research leading to these TEM results has received funding from the from the European Union Seventh Framework Program under Grant Agreement 604391 Graphene Flagship, as well as from EU H2020 ETN project “Enabling Excellence” Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Smallest bimetallic CoPt3 superparamagnetic nanoparticles

  • Karmaoui, Mohamed
  • Amaral, J. S.
  • Lajaunie, Luc
  • Puliyalil, Harinarayanan
  • Tobaldi, David Maria
  • Pullar, Robert C.
  • Labrincha, J. A.
  • Arenal, Raúl
  • Cvelbar, Uroš
We present for the first time a nonaqueous sol–gel route to produce ultrasmall (<2 nm) magnetic bimetallic CoPt3 nanoparticles (NPs). The one-pot procedure is carried out at low temperature (180 °C) using benzyl alcohol, acting as both reducing agent and solvent. The highly monodisperse CoPt3 NPs were investigated with innovative advanced X-ray methods (whole powder pattern modeling), HR-STEM, XPS, and SQUID magnetometry. XPS showed Co was mostly in metallic form, but with a very small amount of CoO on the NP surface. The spherical NPs had an ultrasmall diameter of 1.6 nm and could self-assemble in aligned linear chains, or nanobelts, of single NPs. They are superparamagnetic, with blocking temperature of ∼20 K and coercivity at 10 K of 27.9 kA m–1 (∼350 Oe). However, there is evidence of a second magnetic phase (probably CoO) in the ZFC magnetization curve, which enhances their magnetization values, without significantly affecting their superparamagnetism., This work was developed within the scope of the project CICECO-Aveiro Institute of Materials, POCI-01-0145-FEDER-007679 (FCT ref. UID/CTM/50011/2013), financed by national funds through the FCT/MEC and when appropriate cofinanced by FEDER under the PT2020 Partnership Agreement. We acknowledge Fundação para a Ciência e a Tecnologia (FCT) for grant SFRH/BPD/74477/2010 (M.K.), Ciência2008 program and grant SFRH/BPD/97115/2013 (R.C.P.), grant SFRH/BPD/111270/2015 (J.S.A.), M. Ferro for microscopy analysis, which was supported by RNME-Pole University of Aveiro FCT Project REDE/1509/RME/2005, and Prof. Artur Silva for fruitful discussions (University of Aveiro, Portugal). U.C. acknowledges support of Slovenian Research Agency (ARRS) grant no. L2-7667. The STEM and EDS studies were conducted at the Laboratorio de Microscopías Avanzadas, Instituto de Nanociencia de Aragón, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreements 312483- ESTEEM2 (Integrated Infrastructure Initiative – I3). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from the European Union H2020 program ETN project “Enabling Excellence” Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis and characterization of MoS2 nanosheets

  • Deokar, G.
  • Vignaud, D.
  • Arenal, Raúl
  • Louette, P.
  • Colomer, Jean-François
Here, we report on the synthesis of MoS2 nanosheets using a simple two-step additive-free growth technique. The as-synthesized nanosheets were characterized to determine their structure and composition, as well as their optical properties. The MoS2 nanosheets were analyzed by scanning electron microscopy, transmission electron microscopy (TEM), including high-resolution scanning TEM imaging and energy-dispersive x-ray spectroscopy, x-ray photoelectron spectroscopy (XPS), Raman spectroscopy and photoluminescence (PL). The as-produced MoS2 nanosheets are vertically aligned with curved edges and are densely populated. The TEM measurements confirmed that the nanosheets have the 2H-MoS2 crystal structure in agreement with the Raman results. The XPS results revealed the presence of high purity MoS2. Moreover, a prominent PL similar to mechanically exfoliated few and mono-layer MoS2 was observed for the as-grown nanosheets. For the thin (≤50 nm) nanosheets, the PL feature was observed at the same energy as that for a direct band-gap monolayer MoS2 (1.83 eV). Thus, the as-produced high-quality, large-area, MoS2 nanosheets could be potentially useful for various optoelectronic and catalysis applications., This research work was financially supported by a grant of the University of Namur, Belgium. G Deokar is grateful to C Santos (University catholic of Louvain, 1, Place de Université, Louvain-la-Neuve, Belgium) for allowing initial Raman measurements of MoS2 samples. JFC is Research Associate of FRS-FNRS. The research leading to these results have received partial funding from the European Union Seventh Framework Program under the grant agreement n°604391 Graphene Flagship. D Vignaud acknowledges financial support from the Nord-Pas de Calais Regional Council and the Renatech network. The HR-STEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R Arenal gratefully acknowledges the support of ARAID foundation, of the INA—U. Zaragoza (Spain), from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from the European Union Seventh Framework Program under Grant Agreement 312483—ESTEEM2 (Integrated Infrastructure Initiative—I3) and from EU H2020 ETN project 'Enabling Excellence' Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Systematic study of oxygen vacancy tunable transport properties of few-layer MoO3−x enabled by vapor-based synthesis

  • Hanson, Eve D.
  • Lajaunie, Luc
  • Arenal, Raúl
  • Dravid, Vinayak P.
Vinayak P. Dravid et al., Bulk and nanoscale molybdenum trioxide (MoO3) has shown impressive technologically relevant properties, but deeper investigation into 2D MoO3 has been prevented by the lack of reliable vapor-based synthesis and doping techniques. Herein, the successful synthesis of high-quality, few-layer MoO3 down to bilayer thickness via physical vapor deposition is reported. The electronic structure of MoO3 can be strongly modified by introducing oxygen substoichiometry (MoO3−x), which introduces gap states and increases conductivity. A dose-controlled electron irradiation technique to introduce oxygen vacancies into the few-layer MoO3 structure is presented, thereby adding n-type doping. By combining in situ transport with core-loss and monochromated low-loss scanning transmission electron microscopy–electron energy-loss spectroscopy studies, a detailed structure–property relationship is developed between Mo-oxidation state and resistance. Transport properties are reported for MoO3−x down to three layers thick, the most 2D-like MoO3−x transport hitherto reported. Combining these results with density functional theory calculations, a radiolysis-based mechanism for the irradiation-induced oxygen vacancy introduction is developed, including insights into favorable configurations of oxygen defects. These systematic studies represent an important step forward in bringing few-layer MoO3 and MoO3−x into the 2D family, as well as highlight the promise of MoO3−x as a functional, tunable electronic material., This material is partially based upon work supported by the National Science Foundation under Grant No. DMR-1507810. The EELS study was conducted at the Laboratorio de Microscopías Avanzadas, Instituto de Nanociencia de Aragón, Universidad de Zaragoza, Spain. Some of the research leading to these results had received funding from the European Union Seventh Framework Programme under Grant Agreements 312483- ESTEEM2 (Integrated Infrastructure Initiative-I3). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P and MAT2016-79776-P) and from the European Union H2020 programs ETN project “Enabling Excellence” Grant Agreement 642742 and “Graphene Flagship” Grant Agreement 696656. S.H. and C.W. (DFT calculations) acknowledge support by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, under Grant No. DEFG02-07ER46433. This work made use of the EPIC and SPID facilities of the NUANCE Center at Northwestern University, which has received support from the Soft and Hybrid Nanotechnology Experimental (SHyNE) Resource (NSF NNCI-1542205); the MRSEC program (NSF DMR-1121262) at the Materials Research Center; the International Institute for Nanotechnology (IIN); the Keck Foundation; and the State of Illinois, through the IIN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Three-dimensional branched and faceted gold–ruthenium nanoparticles: Using nanostructure to improve stability in oxygen evolution electrocatalysis

  • Gloag, Lucy
  • Lacroix, Lise-Marie
  • Arenal, Raúl
  • Florea, Ileana
  • Tilley, Richard D.
Richard D. Tilley et al., Achieving stability with highly active Ru nanoparticles for electrocatalysis is a major challenge for the oxygen evolution reaction. As improved stability of Ru catalysts has been shown for bulk surfaces with low-index facets, there is an opportunity to incorporate these stable facets into Ru nanoparticles. Now, a new solution synthesis is presented in which hexagonal close-packed structured Ru is grown on Au to form nanoparticles with 3D branches. Exposing low-index facets on these 3D branches creates stable reaction kinetics to achieve high activity and the highest stability observed for Ru nanoparticle oxygen evolution reaction catalysts. These design principles provide a synthetic strategy to achieve stable and active electrocatalysts., L.G. thanks the Australian Government for an APA. We acknowledge the Electron Microscope Unit of the Mark Wainwright Analytical Centre at UNSW, the ChemiSTEM and TEM at Ernst-Ruska Centre, Forschungszentrum Juelich, Germany and TEM at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza. J.J.G. acknowledges the ARC Centre of Excellence in Convergent Bio-Nano Science and Technology (CE140100036,) and ARC Australian Laureate Fellowship (FL150100060). R.A. acknowledges the Government of Aragon and the European Social Fund., “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26), the Spanish Ministry of Economy and Competitiveness (MINECO) MAT2016-79776-P (AEI/FEDER, UE) and the EU H2020 program ETN Grant Agreement 642742. This work was supported by Programme Investissements d'Avenir ANR-11-IDEX-0002-02, reference ANR-10-LABX-0037-NEXT. We acknowledge the European Associated Laboratory (LEA)-TALEM2 for financial support and the European Union Seventh Framework Program under Grant Agreement 312483—ESTEEM2. W.S. acknowledges the DFG for financial support grant “RESOLV”; EXC1069., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Titania-coated gold nanorods with expanded photocatalytic response. Enzyme-like glucose oxidation under near-infrared illumination

  • Ortega-Liébana, M. Carmen
  • Hueso, José L.
  • Arenal, Raúl
  • Santamaría, Jesús
Gold nanorods coated with a uniform titanium dioxide nanoshell have been prepared and used as glucose-oxidase surrogates. Remarkably, this core-shell photocatalytic nanostructure has been able to induce complete oxidation of glucose at near room temperature (32-34 °C) in a wide range of pH values with the aid of a near-infrared (NIR) irradiation source. In contrast, the uncoated gold nanorods exhibit negligible photo-oxidation response under identical experimental conditions thereby proving the photoactivity of the titania shell towards glucose oxidation. The process takes place via in situ photo-generation of singlet oxygen or hydroxyl radicals as reactive oxidative species (ROS). This underlines the role played by the core nanorods as plasmonic light harvesters in the NIR range and constitutes the first example of a NIR-activated enzyme-like catalyst., The (S)TEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de, Spain. The authors acknowledge the European Research Council for funding through an advanced grant research project (HECTOR grant number 267626) and a CIG-Marie Curie Reintegration Grant (NANOLIGHT REA grant number 294094). The syntheses of materials have been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit of the CIBER in BioEngineering, Biomaterials & Nanomedicine (CIBER-BBN). Some of the research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative − I3). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from the European Union H2020 program ETN project “Enabling Excellence” Grant Agreement 642742. M.C.O. also acknowledges the Spanish Government for the receipt of an FPU predoctoral grant., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Excitonic optical transitions characterized by Raman excitation profiles in single-walled carbon nanotubes

  • Tran, H.N.
  • Blancon, J.C.
  • Huntzinger, J.R.
  • Arenal, R.
  • Popov, V.N.
  • Zahab, A.A.
  • Ayari, A.
  • San-Miguel, A.
  • Vallée, F.
  • Del Fatti, N.
  • Sauvajol, J.L.
  • Paillet, M.
We examine the excitonic nature of the E33 optical transition of the individual free-standing index-identified (23, 7) single-walled carbon nanotube by means of the measurements of its radial-breathing-mode and G-mode Raman excitation profiles. We confirm that it is impossible to determine unambiguously the nature of its E33 optical transition (excitonic vs band to band) based only on the excitation profiles. Nevertheless, by combining Raman scattering, Rayleigh scattering, and optical absorption measurements on strictly the same individual (23, 7) single-walled carbon nanotube, we show that the absorption, Rayleigh spectra, and Raman excitation profiles of the longitudinal and transverse G modes are best fitted by considering the nature of the E33 transition as excitonic. The fit of the three sets of data gives close values of the transition energy E33 and damping parameter G33. This comparison shows that the fit of the Raman excitation profiles provides with good accuracy the energy and damping parameter of the excitonic optical transitions in single-walled carbon nanotubes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Oxidation-assisted graphene heteroepitaxy on copper foil

  • Reckinger, N.
  • Tang, X.
  • Joucken, F.
  • Lajaunie, L.
  • Arenal, R.
  • Dubois, E.
  • Hackens, B.
  • Henrard, L.
  • Colomer, J.F.
We propose an innovative, easy-to-implement approach to synthesize aligned large-area single-crystalline graphene flakes by chemical vapor deposition on copper foil. This method doubly takes advantage of residual oxygen present in the gas phase. First, by slightly oxidizing the copper surface, we induce grain boundary pinning in copper and, in consequence, the freezing of the thermal recrystallization process. Subsequent reduction of copper under hydrogen suddenly unlocks the delayed reconstruction, favoring the growth of centimeter-sized copper (111) grains through the mechanism of abnormal grain growth. Second, the oxidation of the copper surface also drastically reduces the nucleation density of graphene. This oxidation/reduction sequence leads to the synthesis of aligned millimeter-sized monolayer graphene domains in epitaxial registry with copper (111). The as-grown graphene flakes are demonstrated to be both single-crystalline and of high quality.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Preserving p-conjugation in covalently functionalized carbon nanotubes for optoelectronic applications

  • Setaro, A.
  • Adeli, M.
  • Glaeske, M.
  • Przyrembel, D.
  • Bisswanger, T.
  • Gordeev, G.
  • Maschietto, F.
  • Faghani, A.
  • Paulus, B.
  • Weinelt, M.
  • Arenal, R.
  • Haag, R.
  • Reich, S.
Covalent functionalization tailors carbon nanotubes for a wide range of applications in varying environments. Its strength and stability of attachment come at the price of degrading the carbon nanotubes sp 2 network and destroying the tubes electronic and optoelectronic features. Here we present a non-destructive, covalent, gram-scale functionalization of single-walled carbon nanotubes by a new 2+1] cycloaddition. The reaction rebuilds the extended p-network, thereby retaining the outstanding quantum optoelectronic properties of carbon nanotubes, including bright light emission at high degree of functionalization (1 group per 25 carbon atoms). The conjugation method described here opens the way for advanced tailoring nanotubes as demonstrated for light-triggered reversible doping through photochromic molecular switches and nanoplasmonic gold-nanotube hybrids with enhanced infrared light emission.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electrical conductivity of oxidized-graphenic nanoplatelets obtained from bamboo: Effect of the oxygen content

  • Gross, K.
  • Barragán, J.J.P.
  • Sangiao, S.
  • De Teresa, J.M.
  • Lajaunie, L.
  • Arenal, R.
  • Calderón, H.A.
  • Prieto, P.
The large-scale production of graphene and reduced-graphene oxide (rGO) requires low-cost and eco-friendly synthesis methods. We employed a new, simple, cost-effective pyrolytic method to synthetize oxidized-graphenic nanoplatelets (OGNP) using bamboo pyroligneous acid (BPA) as a source. Thorough analyses via high-resolution transmission electron microscopy and electron energy-loss spectroscopy provides a complete structural and chemical description at the local scale of these samples. In particular, we found that at the highest carbonization temperature the OGNP-BPA are mainly in a sp2 bonding configuration (sp2 fraction of 87%). To determine the electrical properties of single nanoplatelets, these were contacted by Pt nanowires deposited through focused-ion-beam-induced deposition techniques. Increased conductivity by two orders of magnitude is observed as oxygen content decreases from 17% to 5%, reaching a value of 2.3 103 S m-1 at the lowest oxygen content. Temperature-dependent conductivity reveals a semiconductor transport behavior, described by the Mott three-dimensional variable range hopping mechanism. From the localization length, we estimate a band-gap value of 0.22(2) eV for an oxygen content of 5%. This investigation demonstrates the great potential of the OGNP-BPA for technological applications, given that their structural and electrical behavior is similar to the highly reduced rGO sheets obtained by more sophisticated conventional synthesis methods.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Intrinsic phonon properties of double-walled carbon nanotubes

  • Tran, H. N.
  • Levshov, D. I.
  • Nguyen, V. C.
  • Paillet, M.
  • Arenal, R.
  • Than, X. T.
  • Zahab, A. A.
  • Yuzyuk, Y. I.
  • Phan, N. M.
  • Sauvajol, J. -L
  • Michel, T.
Double-walled carbon nanotubes (DWNT) are made of two concentric and weakly van der Waals coupled single-walled carbon nanotubes (SWNT). DWNTs are the simplest systems for studying the mechanical and electronic interactions between concentric carbon layers. In this paper we review recent results concerning the intrinsic features of phonons of DWNTs obtained from Raman experiments performed on index-identified DWNTs. The effect of the interlayer distance on the strength of the mechanical and electronic coupling between the layers, and thus on the frequencies of the Raman-active modes, namely the radial breathinglike modes (RBLMs) and G-modes, are evidenced and discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Photoluminescence from an individual double-walled carbon nanotube

  • Levshov, D.I.
  • Parret, R.
  • Tran, H.-N.
  • Michel, T.
  • Cao, T.T.
  • Nguyen, V.C.
  • Arenal, R.
  • Popov, V.N.
  • Rochal, S.B.
  • Sauvajol, J.-L.
  • Zahab, A.-A.
  • Paillet, M.
We report direct and unambiguous evidence of the existence of inner semiconducting tube (ISCT) photoluminescence (PL) from measurements performed on four individual freestanding index-identified double-walled carbon nanotubes (DWNTs). Based on thorough Rayleigh scattering, Raman scattering, and PL experiments, we are able to demonstrate that the ISCT PL is observed with a quantum yield estimated to be a few 10-6 independent of the semiconducting or metallic nature of the outer tube. This result is mainly attributed to ultrafast exciton transfer from the inner to outer tube. Furthermore, by carrying out PL excitation experiments on the (14, 1)@(15, 12) DWNT, we show that the ISCT PL can be detected through the optical excitation of the outer tube, indicating that the exciton transfer can also occur in the opposite way.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Functionalization of MoS2 with 1, 2-dithiolanes: toward donor-acceptor nanohybrids for energy conversion

  • Canton-Vitoria, R.
  • Sayed-Ahmad-Baraza, Y.
  • Pelaez-Fernandez, M.
  • Arenal, R.
  • Bittencourt, C.
  • Ewels, C.P.
  • Tagmatarchis, N.
The covalent functionalization of exfoliated semiconducting MoS2 by 1, 2-dithiolanes bearing an ethylene glycol alkyl chain terminated to a butoxycarbonyl-protected amine and a photoactive pyrene moiety is accomplished. The MoS2-based nanohybrids were fully characterized by complementary spectroscopic, thermal, and microscopy techniques. Markedly, density functional theoretical studies combined with X-ray photoelectron spectroscopy analysis demonstrate preferential edge functionalization, primarily via sulfur addition along partially sulfur saturated zig-zag MoS2 molybdenum-edges, preserving intact the 2D basal structure of functionalized MoS2-based nanohybrids as confirmed by high-resolution transmission electron microscopy and electron energy loss spectroscopy. Furthermore, in the MoS2-pyrene hybrid, appreciable electronic interactions at the excited state between the photoactive pyrene and the semiconducting MoS2 were revealed as inferred by steady-state and time-resolved photoluminescence spectroscopy, implying its high potentiality to function in energy conversion schemes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Generation of subnanometric platinum with high stability during transformation of a 2D zeolite into 3D

  • Liu, L.
  • Díaz, U.
  • Arenal, R.
  • Agostini, G.
  • Concepción, P.
  • Corma, A.
Single metal atoms and metal clusters have attracted much attention thanks to their advantageous capabilities as heterogeneous catalysts. However, the generation of stable single atoms and clusters on a solid support is still challenging. Herein, we report a new strategy for the generation of single Pt atoms and Pt clusters with exceptionally high thermal stability, formed within purely siliceous MCM-22 during the growth of a two-dimensional zeolite into three dimensions. These subnanometric Pt species are stabilized by MCM-22, even after treatment in air up to 540 °C. Furthermore, these stable Pt species confined within internal framework cavities show size-selective catalysis for the hydrogenation of alkenes. High-temperature oxidation-reduction treatments result in the growth of encapsulated Pt species to small nanoparticles in the approximate size range of 1 to 2 nm. The stability and catalytic activity of encapsulated Pt species is also reflected in the dehydrogenation of propane to propylene.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Systematic study of Oxygen vacancy tunable transport properties of few-layer MoO3- x enabled by vapor-based synthesis

  • Hanson, E.D.
  • Lajaunie, L.
  • Hao, S.
  • Myers, B.D.
  • Shi, F.
  • Murthy, A.A.
  • Wolverton, C.
  • Arenal, R.
  • Dravid, V.P.
Bulk and nanoscale molybdenum trioxide (MoO3) has shown impressive technologically relevant properties, but deeper investigation into 2D MoO3 has been prevented by the lack of reliable vapor-based synthesis and doping techniques. Herein, the successful synthesis of high-quality, few-layer MoO3 down to bilayer thickness via physical vapor deposition is reported. The electronic structure of MoO3 can be strongly modified by introducing oxygen substoichiometry (MoO3- x), which introduces gap states and increases conductivity. A dose-controlled electron irradiation technique to introduce oxygen vacancies into the few-layer MoO3 structure is presented, thereby adding n-type doping. By combining in situ transport with core-loss and monochromated low-loss scanning transmission electron microscopy–electron energy-loss spectroscopy studies, a detailed structure–property relationship is developed between Mo-oxidation state and resistance. Transport properties are reported for MoO3- x down to three layers thick, the most 2D-like MoO3- x transport hitherto reported. Combining these results with density functional theory calculations, a radiolysis-based mechanism for the irradiation-induced oxygen vacancy introduction is developed, including insights into favorable configurations of oxygen defects. These systematic studies represent an important step forward in bringing few-layer MoO3 and MoO3- x into the 2D family, as well as highlight the promise of MoO3- x as a functional, tunable electronic material.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanotubes from Oxide-based Misfit Family: the case of Calcium Cobalt Oxide

  • Panchakarla, L. S.
  • Lajaunie, L.
  • Ramasubramaniam, A.
  • Arenal, R.
  • Tenne, R.
Misfit layered compounds (MLCs) have generated significant interest in recent years as potential thermoelectric materials. MLC nanotubes could reveal behavior that is entirely different from the bulk material. Recently, new chemical strategies were exploited for the synthesis of nanotubular forms of chalcogenide-based MLCs, which are promising candidates for thermoelectric materials. However, analogous synthesis of oxide-based MLC nanotubes has not been demonstrated until now. Here, we report a chemical strategy for synthesis of cobalt-oxide-based misfit nanotubes. A combination of high-resolution (scanning) transmission electron microscopy (including image simulations), spatially resolved electron energy-loss spectroscopy, electron diffraction, and density functional theory (DFT) calculations is used to discover the formation of a phase within these nanotubes that differs significantly from bulk calcium cobaltite MLCs. Furthermore, DFT calculations show that this phase is semiconducting with a band gap in excess of 1 eV, unlike bulk calcium cobaltite MLCs, which are known to be metallic. Through systematic experiments, we propose a formation mechanism for these nanotubes that could also apply more generally to realizing other oxide-based MLC nanotubes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

EELS Studies on Nanodiamonds and Amorphous Diamond-like Carbon Materials

  • Arenal, Raúl
Chemical analyses at the local (sub-nanometer/atomic) scale are crucial for improving the understanding of materials. For instance, for doped carbon nanostructures (as those of diamond family), these analyses are critical because their properties strongly depend on the chemical environment/configuration of the dopants ...
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Accurate determination of the chiral indices of individual carbon nanotubes by combining electron diffraction and Resonant Raman spectroscopy

  • Levshov, D. I.
  • Tran, H. N.
  • Paillet, M.
  • Arenal, R.
  • Than, X. T.
  • Zahab, A. A.
  • Yuzyuk, Y. I.
  • Sauvajol, J. -L
  • Michel, T.
The experimental approach combining high resolution transmission electron microscopy (HRTEM), electron diffraction (ED) and resonant Raman spectroscopy (RRS) on the same free-standing individual carbon nanotubes (CNT) is the most efficient method to determine unambiguously the intrinsic features of the Raman-active phonons. In this paper, we review the main results obtained by the approach regarding the intrinsic features of the phonons of single-walled (SWNT) and double-walled carbon nanotubes (DWNT). First, we detail the different methods to identify the structure of SWNTs and DWNTs from the analysis of their electron diffraction patterns (EDP). In the following, we remind the principal features of the Raman response of SWNTs, unambiguously index-identified by ED. A special attention is devoted to the effect of the inter-layer interaction on the frequencies of the Raman-active phonons in index-identified DWNTs. The information obtained on index-identified SWNT and DWNT allows us to propose Raman criteria, which help identifying CNT when the ED fails to propose a single assignment. The efficiency of the Raman criteria as the complement to the ED information for the index-assignment of a few SWNTs and DWNTs is shown. The same approach to index-assign a triple-walled carbon nanotube (TWNT), by combining ED and RRS information, is reported.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Strontium Cobalt Oxide Misfit Nanotubes

  • Panchakarla, L. S.
  • Lajaunie, L.
  • Ramasubramaniam, A.
  • Arenal, R.
  • Tenne, R.
Low-dimensional misfit layered compounds have been found to have ultralow thermal conductivity, which is attributed to their unique structure and the low dimensionality. There are a few studies reporting the preparation of sulfide-based misfit nanotubes but only one study on oxide-based analogs. In this investigation, we report a new oxide-based misfit nanotube derived from misfit layered strontium cobaltite. Thorough structural investigation by electron microscopy techniques, including electron diffraction, aberration corrected high-resolution (scanning) transmission electron microscopy, and electron energy-loss spectroscopy along with density functional theory calculations show that these nanotubes consist of alternating layers of SrCoO2 and CoO2. We have studied systematically the effect of base concentration on the structure and composition of the nanotubes, which reveals the importance of misfit stress to tightly roll the structure into tubular form and thus control the synthesis. Electronic structure calculations find that the structures are semiconducting with a ferrimagnetic ground state. Our studies further extend the family of bulk misfit layered oxides into the 1D realm with potential applications in thermoelectric and electronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Radial collapse of carbon nanotubes for conductivity optimized polymer composites

  • Balima, F.
  • Le Floch, S.
  • Adessi, C.
  • Cerqueira, T. F. T.
  • Blanchard, N.
  • Arenal, R.
  • Brûlet, A.
  • Marques, M. A. L.
  • Botti, S.
  • San-Miguel, A.
The optimization of the electronic conduction of carbon nanotube polymer composites is studied by tuning the radial geometry of the carbon nanotubes in a compression cycle. We have investigated the structural evolution of multi-walled carbon nanotubes in a polyamide matrix as a function of applied high pressure. Combining high resolution electron microscopy and small angle neutron scattering experiments, we conclude that the nanotube radial cross-section is irreversibly deformed following applied pressures up to 5 GPa. Studying highly percolated composites we observe that the sample resistivity drastically decreases with pressure up to about 2 GPa with no further change up to the maximum 5 GPa applied pressure. An important hysteresis is observed upon decompression which leads to an enhanced electrical conductivity of the composite in all the studied compression cycles with maximum pressures ranging from 1 to 5 GPa. Modelling the radial collapse of single-walled carbon nanotubes shows that the modified radial geometry can considerably improve the electronic transport properties in contacted carbon nanotube junctions. Our results open opportunities for engineering nanotube composites by controlling the radial collapse.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Chemical postdeposition treatments to improve the adhesion of carbon nanotube films on plastic substrates

  • Santidrián, A.
  • Sanahuja, O.
  • Villacampa, B.
  • Diez, J.L.
  • Benito, Ana M.
  • Maser, W.K.
  • Muñoz, E.
  • Ansón Casaos, A.
The robust adhesion of single-walled carbon nanotubes (SWCNTs) to plastic substrates is a key issue toward their use in flexible electronic devices. In this work, semitransparent SWCNT films were prepared by spray-coating on two different plastic substrates, specifically poly(ethylene terephthalate) and poly(vinylidene fluoride). The deposited SWCNT films were treated by dipping in suitable solvents separately, namely, 53% nitric acid (HNO3) and N-methyl pyrrolidone. Direct evidence of SWCNT adhesion to the substrate was obtained by a peel-off test carried out with an adhesive tape. Moreover, these treatments caused enhanced film transparency and electrical conductivity. Electron microscopy images suggested that SWCNTs were embedded in the plastic substrates, forming a thin layer of conductive composite materials. Raman spectroscopy detected a certain level of doping in the SWCNTs after the chemical treatments, which particularly affected metallic nanotubes in the case of the HNO3 treatment. The microscopic adhesion and hardness of the SWCNT films were studied through a nanoscratch test. Overall, the efficiency of selected chemical postdeposition treatments for improving the SWCNT adhesion and the robustness of the resulting SWCNT films are demonstrated on flexible substrates of different chemical compositions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Plasmonic properties of an Ag@Ag2Mo2O7 hybrid nanostructure easily designed by solid-state photodeposition from very thin Ag2Mo2O7 nanowires

  • Hakouk, K.
  • Lajaunie, L.
  • El Bekkachi, H.
  • Serier-Brault, H.
  • Humbert, B.
  • Arenal, R.
  • Dessapt, R.
A new Ag@m-Ag2Mo2O7 plasmonic hybrid nanostructure was designed by an easy two-step synthesis method. Firstly, very thin photosensitive monoclinic m-Ag2Mo2O7 nanowires (NWs) were synthesized under ambient pressure and at low temperature by using Ag2Mo3O10·2H2O NWs as a pre-nanostucturated starting material. This innovative soft chemistry route offers some precise control over the purity, the structure and the nanostructuration of the m-Ag2Mo2O7 NWs that exhibit a very thin diameter of around 100 nm and a superior specific surface area compared to previously reported synthesis methods. Secondly, the plasmonic hybrid nanostructure Ag@m-Ag2Mo2O7 was easily in situ obtained via an all solid-state photodeposition method, by irradiating the m-Ag2Mo2O7 NWs under low energy and low-power UV-light. The composition, morphology and plasmonic properties of the nanocomposite were investigated by a combination of energy-dispersive X-ray spectroscopy, high-resolution scanning transmission electron microscopy, X-ray photoelectron spectroscopy and Auger spectroscopy, and near-infrared, Raman and UV-vis spectroscopies as well as spatially-resolved electron energy-loss spectroscopy. A plausible mechanism explaining the formation of the nano-heterostructure under irradiation was also discussed. The Ag@m-Ag2Mo2O7 nanostructure manifests interesting plasmonic properties particularly high surface-enhanced Raman scattering (SERS) sensitivity probed using 2, 2'-bipyridine.