Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 193
Encontrada(s) 2 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cu-zeolite catalysts for NOx removal by selective catalytic reduction with NH3 and coupled to NO storage/reduction monolith in diesel engine exhaust aftertreatment systems

  • De-La-Torre, Unai
  • Pereda-Ayo, Benat
  • González Velasco, Juan Ramón
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Coupled NSR-SCR systems comprising a Pt-BaO/Al2O3 NSR monolith and Cu/CHA, Cu/ZSM-5 or Cu/BETA SCR catalysts are prepared and tested for NOx removal from diesel and lean burn engines exhaust gases. The Cu/zeolite catalysts are characterized by ICP-AES, XRD, N-2 adsorption-desorption, NH3-TPD and H-2-TPR. The physico-chemical characteristics of fresh catalysts and aged under 5% steam/Ar at 750 degrees C for 16 h and are compared, resulting in the Cu/CHA with much higher hydrothermal resistance to the loss of textural and structural properties. The single-SCR, single-NSR and coupled NSR-SCR catalytic performance is studied including the conversion of NO and NH3, slip of NH3, and N2O and NO2 yields. Cu/CHA presents the SCR wider temperature window, eventually 100%NO conversion from 220 to 380 degrees C, even maintained after severe aging. For application in the NSR-SCR technology, the NH3 generated in the NSR catalyst during the rich period is able to achieve higher NO conversion reducing significantly the slip of NH3 (negligible at 200 degrees C and above), very few amount of N2O at any temperature, and small production of NO2 only at higher temperatures. This improvement of activity and selectivity is particularly enhanced with the coupled NSR-Cu/CHA system, which is also maintained when the catalyst is deposited on the cordierite monolith substrate, as in the case of real application. (C) 2016 Published by Elsevier B.V., The authors wish to acknowledge the financial support by the Spanish Economy and Competitiveness Ministry [CTQ2012-32899; MAT2012-3716, and "Severo Ochoa" (SEV 2012-0267)], the Basque Government (IT657-013), and the European Union (SynCat-Match project; ERC-AdG-2014-671093). One of the authors (UDLT) acknowledge to the Basque Government for the PhD Research Grant (BFI-2010-330).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ultrastable Magnetic Nanoparticles Encapsulated in Carbon for Magnetically Induced Catalysis

  • Martínez-Prieto, Luis Miguel
  • Marbaix, Julien
  • Asensio, Juan M.
  • Fazzini, Pier-Francesco
  • Soulantica, Katerina
  • Chaudret, Bruno
  • Cerezo-Navarrete, Christian
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Magnetically induced catalysis using magnetic nanoparticles (MagNPs) as heating agents is a new efficient method to perform reactions at high temperatures. However, the main limitation is the lack of stability of the catalysts operating in such harsh conditions. Normally, above 500 degrees C, significant sintering of MagNPs takes place. Here we present encapsulated magnetic FeCo and Co NPs in carbon (Co@C and FeCo@C) as an ultrastable heating material suitable for high-temperature magnetic catalysis. Indeed, FeCo@C or a mixture of FeCo@C:Co@C (2:1) decorated with Ni or Pt-Sn showed good stability in terms of temperature and catalytic performances. In addition, consistent conversions and selectivities regarding conventional heating were observed for CO2 methanation (Sabatier reaction), propane dehydrogenation (PDH), and propane dry reforming (PDR). Thus, the encapsulation of MagNPs in carbon constitutes a major advance in the development of stable catalysts for high-temperature magnetically induced catalysis., The authors thank the Instituto de Tecnologia Quimica (ITQ), Consejo Superior de Investigaciones Cientificas (CSIC), Universitat Politecnica de València (UPV) for the facilities and Severo Ochoa programe (SEV-2016-0683), "Juan de la Cierva" by MINECO (IJCI-2016-27966), and Primero Proyectos de Investigación PAID-06-18 (SP20180088) for financial support. The authors acknowledge ERC Advanced Grants (MONACAT-2015-694159 and SynCatMatch-2014671093). We also thank the Electron Microscopy Service of the UPV for TEM facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of a hybrid Pd-0/Pd-carbide/carbon catalyst material with high for reactions

  • Garcia-Ortiz, Andrea
  • Cored-Bandrés, Jorge
  • Ruano-Sánchez, Daniel
  • Pérez-Dieste, Virginia
  • Vidal, Juan D|||0000-0002-6862-6443
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] We present a highly selective and active Pd carbon catalyst prepared by an easy hydrothermal synthesis method. This synthetic procedure allows the stabilization under mild conditions of interstitial carbon atoms on the surface of a Pd-0 carbon catalyst. The so formed Pd carbide phase appears on the upper surface layers of the Pd carbon catalyst, as demonstrated by X-ray photoelectron depth profile analysis using variable synchrotron X-ray energies. The presence of carbon in the palladium carbide species modifies the electronic state of surface Pd atoms, resulting in more electron positive Pd species (Pdd+). This influences the adsorption of reactants and reaction intermediates during the hydrogenation of alkynes, dienes and imines, resulting in high selectivities at practically 100% conversion. (C) 2020 Elsevier Inc. All rights reserved., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through "Severo Ochoa"Excellence Programme (SEV-2016-0683) and the PGC2018-097277-B-100 project. The authors also thank the Microscopy Service of UPV for kind help on measurements. A. Garcia-Ortiz thanks "Severo Ochoa" Programme (SEV-2016-0683) for a predoctoral fellowship. J. Cored thanks the Spanish Government (MINECO) for a "Severo Ochoa"grant (BES-2015-075748). D. R. thanks European Research Council project SYNCATMATCH (671093). The NAP-XPS experiments were performed at the NAPP branch of the CIRCE beamline at the ALBA Synchrotron with the collaboration of ALBA staff.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Zr-MOF-808@MCM-41 catalyzed phosgene-free synthesis of polyurethane precursors

  • Rojas-Buzo, Sergio
  • García-García, Pilar
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] In this work, a catalytic method is presented for the synthesis of aromatic carbamates from aromatic amines using dimethyl carbonate instead of phosgene as a green and safe reaction process. Microcrystalline Zr-MOF-808 is reported as an active and efficient heterogeneous catalyst for the selective carbamoylation of anilines and industrially relevant aromatic diamines, under mild reaction conditions with near quantitative yields. We have accomplished the selective growth of well-dispersed Zr-MOF-808 nanocrystals within the mesoporous material MCM-41. A superior catalytic performance of the Zr-MOF808@MCM-41 is demonstrated that together with increased stability stands out as an advantageous heterogeneous catalyst for polyurethane production. In situ FTIR studies have allowed a better understanding of the reaction pathway at the molecular level when the active MOF catalyst is present., This work was funded by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and by the Spanish government through the Severo Ochoa program (SEV-2016-0683). S.R.-B. acknowledges a PhD fellowship from the Generalitat Valenciana. The Electron Microscopy Service of the Universitat Politecnica de Valenciais acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Direct Synthesis of Nano-Ferrierite along the 10-Ring-Channel Direction Boosts Their Catalytic Behavior

  • Margarit Benavent, Vicente Juan
  • Díaz-Rey, Maria Del Rocio
  • Navarro Villalba, Mª Teresa|||0000-0001-5012-8414
  • Martínez, Cristina|||0000-0002-4415-084X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Ferrierite zeolites with nanosized crystals and external surface areas higher than 250m(2)g(-1) have been prepared at relatively low synthesis temperature (120 degrees C) by means of the collaborative effect of two organic structure directing agents (OSDA). In this way, hierarchical porosity is achieved without the use of post-synthesis treatments that usually involve leaching of Tatoms and solid loss. Adjusting the synthesis conditions it is possible to decrease the crystallite size in the directions of the 8- and 10-ring channels, [010] and [001] respectively, reducing their average pore length to 10-30nm and increasing the number of pores accessible. The small crystal size of the nano-ferrierites results in an improved accessibility of reactants to the catalytic active centers and enhanced product diffusion, leading to higher conversion and selectivity with lower deactivation rates for the oligomerization of 1-pentene into longer-chain olefins., This work has been supported by the European Union through the European Research Council (ERC-AdG-2014-671093, SynCatMatch) the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683) and CTQ2015-70126-R, and by the Fundacion Ramon Areces through a research project within the "Life and Materials Sciences" program. M.R.D.-R. acknowledges "La Caixa-Severo Ochoa" International PhD Fellowships (call 2015). The Electron Microscopy Service of the Universitat Politecnica de Valencia is acknowledged for its help in sample characterization. We thank Dr. Manuel Moliner for helpful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ordered covalent organic frameworks, COFs and PAFs. From preparation to application

  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Covalent organic frameworks, COFs, and their derived sub-groups based on auto-assembly of exclusivelyaromatic units, PAFs, are emerging into the advanced materials field due to their high free porous volume,structural regularity, robustness, hydrothermal stability, and functional variety. They present high gasuptake capacities and presence of stabilized active functions in the framework. This together with chargedlow-density structures combined with their organization through -conjugated system arrays, open thepossibilities of COFs and PAFs to be used as effective materials for adsorption, selective separation andcatalysis, and in nanotechnological applications. This review will be focused on self-assembly synthesis mechanisms, physico-chemical characteristics, and applications of this class of promising covalent porousorganic structures, out looking their possible future approaches and perspectives., This work was funded by the Spanish Government (Severo Ochoa program SEV-2012-0267 and MAT2014-52085-C2-1-P) and by the Generalitat Valenciana (Prometeo). The European Union isalso acknowledged by ERC-AdG-2014-671093 – SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Nanocrystalline SSZ-39 zeolite as an efficient catalyst for the methanol-to-olefin (MTO) process

  • Martín García, Nuria
  • Li, Zhibin
  • Yu, Jihong
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The synthesis of nanosized SSZ-39 zeolite has been achieved using a high silica FAU zeolite as the Si and Al source and tetraethylphosphonium (TEP) cations as OSDAs. The obtained SSZ-39 material shows a remarkably high catalyst lifetime compared to conventional SSZ-13 and SSZ-39 materials., Financial support by the Spanish Government-MINECO through ‘‘Severo Ochoa’’ (SEV2012-0267), MAT2015-71261-R, and CTQ2015-68951-C3-1-R is acknowledged. The European Union is also acknowledged by the SYNCATMATCH project (Grant Agreement no. 671093). N. M. thanks MINECO for economical support through pre-doctoral fellowship (BES-2013-064347). J. Y. and A. C. thank the National Natural Science Foundation of China (21320102001) for supporting this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

ITQ-39 zeolite, an efficient catalyst for the conversion of low value naphtha fractions into diesel fuel: The role of pore size on molecular diffusion and reactivity

  • Martínez Armero, Marta Evelia
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Martínez, Cristina|||0000-0002-4415-084X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] ITQ-39, a multipore zeolite with interconnected 12- and 10-ring channel systems, effectively catalyzes the alkylation of two low value naphtha fractions for the production of diesel range alkylaromatics. A catalytic and molecular dynamics study allows us to conclude that its higher selectivity to the desired diesel fraction and, especially, its longer catalyst life as compared to beta or MCM-22, conventionally used as heterogeneous alkylation catalysts, are due to the combined contribution of its small nano-sized crystallites, moderate Bronsted acidity and unique framework topology. The small diffusion coefficients obtained for alkylaromatics on ITQ-39 as compared to those corresponding to the large pore beta zeolite evidence the significant diffusional problems of most of the reactants and products through the channels of the ITQ-39 structure. Thus, alkylation reactions on this zeolite seem to occur mainly on the most external acid sites (external surface, pore mouths), whereas the zeolite structure contributes positively by preventing undesired reactions to occur, which would result in lower selectivity to the monoalkylated products and in a faster catalyst deactivation., Financial support by the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267), Consolider Ingenio 2010-Multicat, MAT2012-37160 and MAT2012-31657, by the European Union through ERC-AdG-2014-671093 - SynCatMatch and by the Generalitat Valenciana through the Prometeo program (PROME-TEOII/2013/011) is acknowledged. Repsol is thanked for financial support and permission to publish these results. G.S. thanks ASIC-UPV for computing time. The Electron Microscopy Service of the UPV is acknowledged for their help in samples characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Determination of the Evolution of Heterogeneous Single Metal Atoms and Nanoclusters under Reaction Conditions: Which Are the Working Catalytic Sites?

  • Liu, Lichen
  • MEIRA, DEBORA M.
  • Arenal, Raul
  • Puga, Alberto V.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Identification of active sites in heterogeneous metal catalysts is critical for understanding the reaction mechanism at the molecular level and for designing more efficient catalysts. Because of their structural flexibility, subnanometric metal catalysts, including single atoms and clusters with a few atoms, can exhibit dynamic structural evolution when interacting with substrate molecules, making it difficult to determine the catalytically active sites. In this work, Pt catalysts containing selected types of Pt entities (from single atoms to clusters and nanoparticles) have been prepared, and their evolution has been followed, while they were reacting in a variety of heterogeneous catalytic reactions, including selective hydrogenation reactions, CO oxidation, dehydrogenation of propane, and photocatalytic H-2 evolution reaction. By in situ X-ray absorption spectroscopy, in situ IR spectroscopy, and high-resolution electron microscopy techniques, we will show that some characterization techniques carried out in an inadequate way can introduce confusion on the interpretation of coordination environment of highly dispersed Pt species. Finally, the combination of catalytic reactivity and in situ characterization techniques shows that, depending on the catalyst-reactant interaction and metal-support interaction, singly dispersed metal atoms can rapidly evolve into metal clusters or nanoparticles, being the working active sites for those abovementioned heterogeneous reactions., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683). L.L. thanks ITQ for providing a contract. The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, and was supported by the U.S. DOE under contract no. DE-AC02-06CH11357 and the Canadian Light Source and its funding partners. The HR STEM and STEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R.A. acknowledges support from Spanish MINECO grant MAT2016-79776-P (AEI/FEDER, UE), from the Government of Aragon and the European Social Fund (grant number E13_17R, FEDER, UE), and from the European Union H2020 program "ESTEEM3" (grant number 823717). A.V.P. thanks the Spanish Government (Agencia Estatal de Investigacion) and the European Union (European Regional Development Fund) for a grant for young researchers (CTQ2015-74138-JIN, AEI/FEDER/UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Selective Introduction of Acid Sites in Different Confined Positions in ZSM-5 and Its Catalytic Implications

  • Li, Chengeng
  • Miguel, Pablo J.
  • Dedecek, Jiri
  • Vidal Moya, José Alejandro
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Controlling the location of acid sites in zeolites can have a great effect on catalysis. In this work we face the objective of directing the location of AI into the 10R channels of ZSM-5 by taking advantage of the structural preference of B to occupy certain positions at the channel intersections, as suggested by theoretical calculations. The synthesis of B-Al-ZSM-5 zeolites with variable Si/Al and Si/B ratios, followed by B removal in a postsynthesis treatment, produces ZSM-5 samples enriched in Al occupying positions at 10R channels. The location of the acid sites is determined on the basis of the product distribution of 1-hexene cracking as a test reaction. The higher selectivity to propene and lower C-4(=)/C-3(=) ratio in the samples synthesized with B and subsequently deboronated can be related to a larger concentration of acid sites in 10R channels, where monomolecular cracking occurs. Finally, several ZSM-5 samples have been tested in the methanol to propene reaction, and those synthesized through the B -assisted method show longer catalytic lifetime, higher propene yield, and lower yield of alkanes and aromatics., This work was supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and the Spanish Government-MINECO through "Severo Ochoa" (SEV-2016-0683) and CTQ2015-70126-R. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are gratefully acknowledged for computational resources and technical support. C.L. acknowledges the China Scholarship Council (CSC) for a Ph.D. fellowship
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Silver nanocluster in zeolites. ADSORPTION of ETHYLENE traces for fruit preservation

  • Cisneros, Larisha
  • Gao, Fei
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Removal of trace amounts of C2H4 from air streams at low temperature is technologically important for fruit preservation in warehouses. For that reason, a systematic quantitative and comparative study of Ag-zeolites for trace ethylene adsorption has been carried out. Combining characterization results with trace ethylene adsorption in a fixed-bed system have allowed to stablish a correlation between Ag delta+ species present in the zeolites and trace ethylene adsorption capacity. Among the zeolites studied, silver exchanged zeolites with -CHA (SSZ-13) and -LTA (5A) frameworks exhibited the most stable and highly dispersed silver sites, with an excellent potential for indoor environmental control of trace ethylene at 0 degrees C., FG acknowledges a research fellowships from Jiangsu Key Laboratory of Vehicle Emissions Control Program of China. LC acknowledges Mexican Research program CONACyT (3115621) and ITQ for a scholarship. The economical support by EU ERC-AdG-2014-671093 - SynCatMatch is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ultrafast Electron Diffraction Tomography for Structure Determination of the New Zeolite ITQ-58

  • Simancas-Coloma, Jorge
  • Simancas Coloma, Raquel
  • Bereciartua-Pérez, Pablo Javier
  • Nicolopoulos ., Stavros
  • Das, Partha Pratim
  • Gemmi, Mauro
  • Mugnaioli, Enrico
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] In this work a new ultrafast data collection strategy for electron diffraction tomography is presented that allows reducing data acquisition tithe by one order of Magnitude.,,This Methodology minimizes the radiation damage of, beam-sensitive materials, such as microporous materials. This method, combined with the precession of the electron beam, provides high quality data enabling the determination of very complex structures. Most importantly,, the implementation of this new, electron diffraction methodology is, easily affordable in any modem electron Microscope. As a proof of concept, we have solved a new highly complex zeolitic structure named ITQ-58, with a very low symmetry (triclinic) and a large unit cell volume (1874.61(3)), containing 16 silicon and 32 oxygen atoms in its asymmetric unit, which would be very difficult to solve with the state of the art techniques., The authors gratefully acknowledge financial support of European Research Council (ERC-2014-AdG ref 671093 "MATching zeolite SYNthesis with CATalytic activity"), Spanish Government (MAT2015-71842-P (MINECO/FEDER), MAT2012-38567-C02-01 and Severo Ochoa SEV-2012-0267), and Generalitat Valenciana (Project Prometeo). E.M. was also supported by the Italian project FIR2013 Exploring the Nanoworld. Authors thank beamline MSPD at Spanish Synchrotron ALBA for beam time allocation. We acknowledge JEOL Japan, JEOL Europe, and specially Junichi Morimoto from JEOL Europe for the assistance during the specific alignments of the microscope. Finally, authors specially thank the Electron Microscopy Service of the Universitat Politecnica de Valencia and, in particular, Manuel J. Planes and Jose L. Moya for their invaluable support for setting up the EDT data acquisition. Original data (collected EDT frames and integrated intensities) can be requested directly from corresponding authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Limits of the Confinement Effect Associated to Cage Topology on the Control of the MTO Selectivity

  • Ferri-Vicedo, Pau
  • Li, Chengeng
  • Rodríguez-Fernández, Aida
  • Paris, Cecilia|||0000-0002-5673-8114
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The light olefin product distribution of the methanol-to-olefin (MTO) reaction catalyzed by acid zeolites and zeotypes depends on the nature of the entrapped hydrocarbon pool species that act as co-catalysts. The preferential stabilization by confinement effects of the cationic intermediates involved in the side-chain or paring pathways of the aromatics-based cycle of the MTO mechanism in small-pore cage-based zeolites is determined by the topology of the cavity, and can be quantitatively described through the E-int(7/5) parameter obtained from DFT calculations. In this work we extend the study of the E-int(7/5) parameter to a wide range of structures (ERI, LEV, AEI, CHA, DDR, AFX, RTH, ITE, SAV, UFI, RHO, KFI, and LTA) and discuss its applicability in small cages with steric constraints to host bulky intermediates, in zeolites with a tight fitting between the cavity and the hosted cations, and in large cages where confinement effects are lost in part and competitive processes occur., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), Spanish Government through ''Severo Ochoa" (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE), and by Generalitat Valenciana through AICO/2019/060. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Espanola de Supercomputacion (RES) and Servei d'Informatica de la Universitat de Valencia (SIUV) are acknowledged for computational resources and technical support. P.F. and C.L. thank ITQ for their contracts. A.R.F. acknowledges the Spanish Government-MINECO for a FPU scholarship (FPU2017/01521).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Regioselective generation and reactivity control of subnanometric platinum clusters in zeolites for high-temperature catalysis

  • Liu, Lichen
  • Lopez-Haro, Miguel
  • Lopes, Christian W.
  • Li, Chengeng
  • Simonelli, Laura
  • Calvino, Jose J.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Subnanometric metal species (single atoms and clusters) have been demonstrated to be unique compared with their nanoparticulate counterparts. However, the poor stabilization of subnanometric metal species towards sintering at high temperature (>500 degrees C) under oxidative or reductive reaction conditions limits their catalytic application. Zeolites can serve as an ideal support to stabilize subnanometric metal catalysts, but it is challenging to localize subnanometric metal species on specific sites and modulate their reactivity. We have achieved a very high preference for localization of highly stable subnanometric Pt and PtSn clusters in the sinusoidal channels of purely siliceous MFI zeolite, as revealed by atomically resolved electron microscopy combining high-angle annular dark-field and integrated differential phase contrast imaging techniques. These catalysts show very high stability, selectivity and activity for the industrially important dehydrogenation of propane to form propylene. This stabilization strategy could be extended to other crystalline porous materials., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the Severo Ochoa Programme (SEV-2016-0683). L.L. thanks ITQ for providing a contract. The authors also thank the Microscopy Service of UPV for the TEM and STEM measurements. The XAS measurements were carried out in CLAESS beamline at the ALBA synchrotron. HR STEM measurements were performed at DME-UCA in Cadiz University with financial support from FEDER/MINECO (MAT2017-87579-R and MAT2016-81118-P). A relevant patent application (European patent application No. 19382024.8) has been presented. C.W.L. thanks CAPES (Science without Frontiers-Process no. 13191/13-6) for a predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

One-pot co-crystallization of beta and pentasil nanozeolites for the direct conversion of a heavy reformate fraction into xylenes

  • Margarit Benavent, Vicente Juan
  • Portilla Ovejero, Mª Teresa
  • Abudawoud, Raed
  • Al-Zahrani, Ibrahim M.
  • Shaikh, Sohel
  • Navarro Villalba, Mª Teresa|||0000-0001-5012-8414
  • Martínez, Cristina|||0000-0002-4415-084X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Upgrading of the heavy reformate fraction (HR), containing mainly C9+ aromatics, is usually performed by dealkylation or by transalkylation with added benzene and/or toluene to obtain the more valuable xylenes. However, when the costs related to the use of benzene and toluene are considered, the one-step dealkylation/transalkylation of the C9+ alkylaromatics to xylenes becomes economically attractive. Thus, in a first step, ethylmethylbenzenes (EMB) will have to be dealkylated to toluene, which will then react with the trimethylbenzenes (TMB) present in the HR feed to produce xylenes by transalkylation. Medium pore zeolites will favor dealkylation, whereas large pore zeolites will be more adequate for carrying out the transalkylation reaction. In this work, we present the one-pot synthesis of beta-pentasil aggregates with tunable ratios of the large pore beta to the medium pore component. We show that the close proximity of the beta and pentasil nanocrystals obtained by one-pot co-crystallization synthesis, results in a highly efficient catalyst for the consecutive dealkylation/transalkylation process. The bifunctional catalyst based on the co-crystallized aggregate is more active and selective to xylenes than a catalyst based on a physical mixture of equivalent beta and pentasil nanozeolites synthesized following an analogous procedure. The small crystallite sizes of the co-crystallized zeolites provide the additional advantage of a lower deactivation rate as compared to a reference benchmark catalyst. Results are shown on both, model molecules and industrial HR feed., This work has been supported by Saudi Aramco, by the Spanish Government-MICINN through "Severo Ochoa" (SEV 2012-0267) and RTI2018-101033-B-I00, by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Ftmdacion Ramon Areces through a research contract of the "Life and Materials Science" program. We thank Belen Esparcia for technical assistance, and the Electron Microscopy Service of the UPV for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The influence of swelling agents molecular dimensions on lamellar morphology of MWW-type zeolites active for fructose conversion

  • Schwanke, Anderson Joel
  • Pergher, Sibele
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] A new route to obtain pillared, disordered or desilicated MWW-type zeolites was developed assisted by quaternary ammonium surfactants with different hydrocarbon tail size acting as swelling agents (C(12)TA(+), C(I6)TA(+), C(18)TA(+)) and TPA(+) both exchanged to their hydroxide forms instead of only one swelling agent (C(n)TA(+) or TPA(+)) in hydroxide form. Effect of surfactant concentration and swelling conditions were determinant to obtain MWW-type zeolites with different lamellar organization and spatial distribution of individual zeolitic layers. Specifically, soft swelling at 25 degrees C with C(12)TA(+) preserved layer structure reaching a final disordered/pillared structure while pillared structures are obtained in the case of materials swollen with C(16)TA(+) and C(18)TA(+). Aggressive swelling processes at 80 degrees C favored desilication, damaging the layers structure in case of C(12)TA(+) while pillared materials are obtained after swollen with C(16)TA(+) and C(18)TA(+) surfactants. It was proved that both swelling agents in hydroxide forms combining with swelling and pillaring procedure influenced on physico-chemical and morphological nature of MWW-type materials due to the particular conditions used. The obtained derivative MWW zeolites with different morphology, order and accessibility levels were firstly evaluated by catalytic dehydration of fructose to 5-hydroxymethylfurfural (5-HMF) showing superior activity compared to beta zeolites reported in literature., Anderson Joel Schwanke is grateful to CAPES Foundation and PDSE program (process number 99999.004779/2014-02) from Ministry of Education of Brazil. U.D and A.C acknowledge to the Spanish Government (Severo Ochoa program SEV-2012-0267 and MAT2014-52085-C2-1-P) and to the Generalitat Valenciana (Prometeo 11/2013-011) by the funding. The European Union is also acknowledged by ERC-AdG-2014-671093 - SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Production of aromatics from biomass by computer-aided selection of the zeolite catalyst

  • Margarit Benavent, Vicente Juan
  • Gallego, Eva M.
  • Paris, Cecilia|||0000-0002-5673-8114
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Taking into account that the transformation of biomass-derived 2,5-dimethylfuran (DMF) top-xylene involves Diels-Alder (DA) cycloaddition as the limiting step, the use of an ITQ-2 zeolite obtained by direct synthesis (DS-ITQ-2) as a catalyst for this reaction is proposed based on the fact that the organic molecule employed for its synthesis mimics the size and shape of the DA oxanorbornene cycloadduct intermediate. Periodic Density Functional Theory (DFT) calculations reveal a better stabilization of the oxanorbornene intermediate within the external hemicavities or "cups" of the DS-ITQ-2 zeolite (MWW-framework) than in other zeolites employed for this reaction, such as FAU and Beta. Interestingly, experimental results also show improved catalytic conversion values for the DS-ITQ-2 zeolite compared to FAU and Beta, in good agreement with the stabilization energies calculated by DFT. The "ab initio" catalyst design presented here to enhance the catalytic performance for the transformation of biomass-derived products is a valuable example that could be employed for the rationalization of other chemical processes catalyzed by zeolites., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by Spanish Government through "Severo Ochoa" (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE). E. M. G. acknowledges "La Caixa - Severo Ochoa" International PhD Fellowships (call 2015). Elisa Garcia is acknowledged for her technical assistance in this work. The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization. We appreciate the support of ExxonMobil Research and Engineering for their help with our efforts in fundamental catalytic research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tutorial: structural characterization of isolated metal atoms and subnanometric metal clusters in zeolites

  • Liu, Lichen
  • Lopez-Haro, Miguel
  • Calvino, Jose J.
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The encapsulation of subnanometric metal entities (isolated metal atoms and metal clusters with a few atoms) in porous materials such as zeolites can be an effective strategy for the stabilization of those metal species and therefore can be further used for a variety of catalytic reactions. However, owing to the complexity of zeolite structures and their low stability under the electron beam, it is challenging to obtain atomic-level structural information of the subnanometric metal species encapsulated in zeolite crystallites. In this protocol, we show the application of a scanning transmission electron microscopy (STEM) technique that records simultaneously the high-angle annular dark-field (HAADF) images and integrated differential phase-contrast (iDPC) images for structural characterization of subnanometric Pt and Sn species within MFI zeolite. The approach relies on the use of a computational model to simulate results obtained under different conditions where the metals are present in different positions within the zeolite. This imaging technique allows to obtain simultaneously the spatial information of heavy elements (Pt and Sn in this work) and the zeolite framework structure, enabling direct determination of the location of the subnanometric metal species. Moreover, we also present the combination of other spectroscopy techniques as complementary tools for the STEM-iDPC imaging technique to obtain global understanding and insights on the spatial distributions of subnanometric metal species in zeolite structure. These structural insights can provide guidelines for the rational design of uniform metal-zeolite materials for catalytic applications. Precise knowledge of the structure of metals supported and stabilized by zeolite frameworks informs improved design and synthesis of the catalysts. This tutorial describes scanning transmission electron microscopy approaches for their structural analysis., This work was supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the 'Severo Ochoa Program' (SEV-2016-0683). The authors also thank the Microscopy Service of UPV for the TEM and STEM measurements. The XAS measurements were carried out in CLAESS beamline of ALBA synchrotron. HR STEM measurements were performed at the DME-UCA node of the ELECMI Singular Infrastructure at Cadiz University, with financial support from FEDER/MINECO (MAT2017-87579-R and MAT2016-81118-P). The authors thank C. W. Lopes and P. Concepcion for their help with the analysis of spectroscopic results. The financial support from ExxonMobil on this project is also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Preparation of Continuous Highly Hydrophobic Pure Silica ITQ-29 Zeolite Layers on Alumina Supports

  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Ono, Hideki
[EN] The preparation of continuous layers of highly hydrophobic pure silica ITQ-29 zeolite, potentially applicable as hydrophobic membranes for separation of molecules based on their polarity, has been investigated. Continuous layers of intergrown ITQ-29 zeolite crystals were successfully grown on porous alumina supports by optimization of the synthesis conditions, such as the appropriate selection of the seeds, the procedure for the gel preparation, and the calcination conditions. This resulted in the formation of all silica ITQ-29 zeolite layers without the presence of germanium required in previously reported ITQ-29 membranes, with the subsequent improvement in quality and stability, as verified by the absence of cracks after calcination. We have proved that the incorporation of aluminum from the support into the zeolite layer does not occur, neither during the secondary growth nor through migration of aluminum species during calcination., This research was funded by the European Research Council, grant ERC-AdG-2014-671093 (SynCatMatch) and the Spanish Government, through "Severo Ochoa" grant SEV-2016-0683 and RTI2018-101784-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Transforming Nano Metal Nonselective Particulates into Chemoselective Catalysts for Hydrogenation of Substituted Nitrobenzenes

  • Serna, Pedro
  • Corma Canós, Avelino|||0000-0002-2232-3527
The hydrogenation of nitro compounds is an industrial process that has experienced a renovated interest in the last 10 years due to the discovery of highly selective and environmentally friendly solid catalysts. Particularly, the performance of chemoselective reactions in the presence of very sensitive groups such as double and triple CC bonds, with H-2 as reductant and no soluble additives needed, had been elusive for decades. The discovery that gold nanopartides on solid supports could carry out such a reaction very selectively invigorated this area of research and claimed gold as an outstanding catalyst beyond oxidation processes. Subsequent work, devoted to understand how gold catalysts operate, established a strong basis for the design of more efficient materials and the development of new routes for the synthesis of nitro derivatives. Here, we present three generations of materials that allowed improving the performance of the original gold catalysts. The relatively low activity of the initial Au/TiO2 catalysts could be first boosted, without practical loss of selectivity, by the design of a material that incorporated two catalytic functions on the support: small amounts of platinum to enhance H-2 dissociation and a greater amount of gold to activate the -NO2 group. Later, we learned how to control the catalytic structures and induce chemoselectivity to traditionally unselective metals such as platinum, ruthenium, and nickel nanoparticles. Recently, Fe2O3 nanoparticles surrounded by a nitrogen-doped carbon layer have erupted as a promising alternative. A remarkable outcome from all that work is that the final pool of catalytic alternatives has been markedly expanded. Diversity is important because different solutions may open new gates to different catalytic processes, and we summarize here how the scope of new reactions and products could be expanded by means of properly designed metal catalysts in which the support and metal work in a concerted way to direct the reaction toward the desired product. For example, whereas Au/TiO2 is a chemoselective catalyst that drives the reaction efficiently to the fully reduced reaction product (aniline), the reaction could be tuned to obtain azocompounds in high yields by using nanoparticulated ceria to support the gold nanoparticles. On the other hand, whereas nitrobenzenes and aldehydes react in H-2 to afford ftnines in the presence of Au/TiO2, the product distribution can be switched toward a more oxidized condensation product (a nitrone) using a chemoselective Pt/C catalyst, or to produce cyclohexanone oxime directly from nitrobenzene by means of supported Au and Pd metal catalysts. These and other examples represent some notable achievements, which are possibly, just the tip of the iceberg., The research was supported by Project CONSOLIDER INGENIO (MULTICAT), PROMETEO, the SEVERO OCHOA Program for centers of excellence. P.S. thanks the "Subprograma Ramon y Cajal" for the contract RYC-2012-10662. The European Union is also acknowledged by ERC-AdG-2014-671093 - SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efficient Oligomerization of Pentene into Liquid Fuels on Nanocrystalline Beta Zeolites

  • Díaz-Rey, Maria Del Rocio
  • Martínez Franco, Raquel
  • Paris, Cecilia|||0000-0002-5673-8114
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Martínez, Cristina|||0000-0002-4415-084X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Light alkenes oligomerization, performed in the presence of heterogeneous acid catalysts, is an interesting alternative for the production of clean liquid fuels. The process, when catalyzed by zeolites, is flexible and can be directed to the formation of oligomers in the gasoline, jet fuel, or diesel range by adjusting the reaction conditions and the zeolite's structure. Herein we show how reducing the crystal size of large-pore Beta zeolites down to 10-15 nm and controlling the number and strength distribution of their Bronsted acid sites leads to highly active and stable catalysts, selective to true oligomers within the naphtha and, especially, the diesel range. The shorter diffusion path lengths in the smaller crystallites and the reduced Bronsted acid site density of the two nanosized beta zeolites (10-15 nm) synthesized with Si/Al = 15 lead to 1-pentene conversion above 80% during the 6 h time on stream (TOS) at a space time (W/F) of 2.8 g.h.mol(-1). This value is higher than the olefin conversion obtained for a commercial nanobeta (30 nm) at a 3-fold space time of 9.1 g.h.mol(-1)., Financial support by the Spanish Government-MINECO through "Severn Ochoa" (SEV-2016-0683), MAT2015-71261-R and CTQ2015-70126-R, by the Fundacion Ramon Areces through a research project within the "Life and Materials Sciences" program, and by the European Union through ERC-AdG-2014-671093-Syn-CatMatch is acknowledged. M.R.D-R. acknowledges "La Caixa-Severo Ochoa" International PhD Fellowships (call 2015). The Electron Microscopy Service of the Universitat Politecnica de Valencia is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Direct synthesis of the organic and Ge free Al containing BOG zeolite (ITQ-47) and its application for transformation of biomass derived molecules

  • Huang, Qintong
  • Chen, Ningyue
  • Liu, Lichen
  • Yi, Xianfeng
  • Ma, Chao
  • Lianf, Weichi
  • Zheng, Anmin
  • Zhang, Chuanqi
  • Hu, Jibo
  • Cai, Zilin
  • Liu, Yi
  • Jiang, Jiuxing
  • Arias, Karen S.|||0000-0001-5649-7392
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Aluminosilicate boggsite (Si/Al-BOG) has been hydrothermally synthesized without adding org. structure-directing agents (OSDAs) in the synthesis gel using the borosilicogermanium ITQ-47 (Si/B-ITQ-47) zeolite as seeds. The introduction of the costly and environmentally less benign phosphazene org. structure-directing agent is not required to grow the zeolite. Physicochem. characterization expts. show that Si/Al-BOG has good crystallinity, high surface area, tetrahedral Al3+ species, and acid sites. In order to test the catalytic performance of the zeolite, the synthesis of L,L-lactide from L-lactic acid was performed. Si/Al-BOG exhibits 88.2% conversion of L-lactic acid and 83.8% L,L-lactide selectivity, which are better than those of other zeolites studied up to now., This work was supported by the National Natural Science Foundation of China 21971259 and 91645112, The Natural Science Foundation of Hubei Province of China (2014CFA043), and the Key Research Program of Frontier Sciences, CAS (No. QYZDB-SSW-SLH026). The European Union is also acknowledged by ERC-AdG-2014-671093 SynCatMatch, and the Spanish Government through "Severo Ochoa" (SEV-2016-0683, MINECO). Q. H. acknowledges the International Program Fund for doctoral students, Sun Yat-sen University, for scholarships in Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of highly stable metal-containing extra-large-pore molecular sieves

  • Martínez Franco, Raquel
  • Paris, Cecilia|||0000-0002-5673-8114
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The isomorphic substitution of two different metals (Mg and Co) within the framework of the ITQ-51 zeotype (IFO structure) using bulky aromatic proton sponges as organic structure-directing agents (OSDAs) has allowed the synthesis of different stable metal-containing extra-large-pore zeotypes with high pore accessibility and acidity. These metal-containing extra-large-pore zeolites, named MgITQ-51 and CoITQ-51, have been characterized by different techniques, such as powder X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectrometry, UV-Vis spectroscopy, temperature programmed desorption of ammonia and Fourier transform infrared spectroscopy, to study their physico-chemical properties. The characterization confirms the preferential insertion of Mg and Co atoms within the crystalline structure of the ITQ-51 zeotype, providing high Bronsted acidity, and allowing their use as efficient heterogeneous acid catalysts in industrially relevant reactions involving bulky organic molecules., Financial support by the Spanish Government-MINECO through 'Severo Ochoa' (SEV 2012-0267), Consolider Ingenio 2010-Multicat and MAT2012-37160 is acknowledged. The European Union is also acknowledged by the SynCatMatch project (ERC-AdG-2014-671093).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of isomorphically substituted Ru manganese molecular sieves and their catalytic properties for selective alcohol oxidation

  • Sabate-Fornons, Ferran
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Sabater Picot, Mª José
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Ruthenium has been incorporated into the framework of the cryptomelane type manganese oxide K-OMS-2 ([Ru]-K-OMS2) and the presence of this element into the structure has been assessed by combining analytical and vibrational techniques such as ICP, UV-Vis, FT-IR and Raman spectroscopies, X-ray diffraction, electron microscopy (HR-TEM and SEM), TPR-H-2, and X-ray photoelectron spectroscopy. Rietveld refinement of the X-ray diffractogram has allowed to estimate changes in the values of cell parameters which were compatible with an isomorphic ruthenium substitution into the original structure. These calculations are in agreement with the observed increase in the interplanar spacing of (100) planes from 7.1 angstrom to 7.7 angstrom for the Ru-doped material., Financial support by the European Union through ERC-AdG-2014-671093 (SynCatMatch), the Ministerio de Economia y Competitividad, Programa Severo Ochoa (SEV2016-0683) and Ministerio de Ciencia Innovacion y Universidades, Programa Estatal de Generacion de Conocimiento (PGC2018-101247-B-100) are gratefully acknowledged. F.S. thanks to Ministerio de Ciencia, Innovacion y Universidades for the economic support (Ayuda Predoctoral FPI - Severo Ochoa). The Electron Microscope of the Universitat Politecnica de Valencia is acknowledged for their help in the characterization of samples.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural modulation and direct measurement of subnanometric bimetallic PtSn clusters confined in zeolites

  • Liu, Lichen
  • Lopez-Haro, Miguel
  • Lopes, Christian W.
  • Rojas-Buzo, Sergio
  • Manzorro, Ramon
  • Simonelli, Laura
  • Sattler, Aaron
  • Calvino, Jose J.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Serna Merino, Pedro Manuel
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Modulating the structures of subnanometric metal clusters at the atomic level is a great synthetic and characterization challenge in catalysis. Here, we show how the catalytic properties of subnanometric platinum clusters (0.5-0.6 nm) confined in the sinusoidal 10R channels of purely siliceous MFI zeolite are modulated upon introduction of partially reduced tin species that interact with the noble metal at the metal/support interface. The platinum-tin clusters are stable in H(2)over an extended period of time (>6 h), even at high temperatures (for example, 600 degrees C), which is determined by only a few additional tin atoms added to the platinum clusters. The structural features of platinum-tin clusters, which are not immediately visible by conventional characterization techniques but can be established after combination of in situ extended X-ray absorption fine structure, high-angle annular dark-field scanning transmission electron microscopy and CO infrared data, are key to providing a one-order of magnitude lower deactivation rate in the propane dehydrogenation reaction while maintaining high intrinsic (initial) catalytic activity, This work was supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683). L.L. thanks the ITQ for providing a contract. The authors also thank the Microscopy Service of the UPV for the TEM and STEM measurements. The XAS measurements were carried out in the CLAESS beamline of the ALBA synchrotron. We thank Giovanni Agostini for his kind support in the analysis of XAS data. HR-HAADF-STEM measurements were performed at DME-UCA at Cadiz University with financial support from FEDER/MINECO (MAT2017-87579-R and MAT2016-81118-P). C.W.L. thanks CAPES (Science without Frontiers -Process no. 13191/13-6) for a predoctoral fellowship. The financial support from ExxonMobil for this project is also greatly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Switching between classical/nonclassical crystallization pathways of TS-1 zeolite: implication on titanium distribution and catalysis

  • Bai, Risheng
  • Song, Yue
  • Latsch, Lukas
  • Zou, Yongcun
  • Feng, Zhaochi
  • Coperet, Christophe
  • Yu, Jihong
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] In the MFI zeolite crystallization process, the classical crystallization mechanism based upon the addition of silica species is often concomitant with the nonclassical route that is characteristic of the attachment of silica nanoparticle precursors. However, the factors that govern the preferences for each mechanism remain unclear. In this work, we present the impact of switching between these two crystallization pathways on the active sites and the resulting catalytic performance of the titanosilicate TS-1 zeolite. By controlling the self-assembled precursor structures in the early crystallization stage which are mediated by the Ti and H2O in the reaction system, we could achieve the preferred modes of crystal growth of the TS-1 zeolite. We indicate that by directing the predominant crystallization path from the classical to the nonclassical route, it is possible to generate more stable bridging peroxo species upon reaction with hydrogen peroxide, as confirmed by O-17 solid-state nuclear magnetic resonance spectroscopy, thus substantially increasing the catalytic performance of the resulting TS-1 for olefin epoxidation., The authors thank the National Key Research and Development Program of China (grant 2021YFA1501202), the National Natural Science Foundation of China (grant 21920102005, 21835002 and 21621001), the 111 Project (B17020), the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch), and the Spanish Government through "Severo Ochoa" (SEV-2016-0683, MINECO) for supporting this work. L. L. thanks the Scholarship Fund of the Swiss Chemical Industry (SSCI) for funding. Jos ' e Gaona Migu ' elez is acknowledged for his technical help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chiral hybrid materials based on pyrrolidine building units to perform asymmetric Michael additions with high stereocontrol

  • Llopis-Perez, Sebastian
  • Garcia Fernandez, Maria Teresa
  • Cantin, A.
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] A new chiral mesoporous hybrid material was synthesized based on pyrrolidine units included in a siliceous framework, HybPyr, and integrated into the organic-inorganic structure, from a specific bis-silylated precursor. A fluoride sol-gel methodology under soft synthesis conditions and in the absence of sophisticated structural directing agents allowed the generation of a mesoporous architecture with a homogeneous distribution of active chiral moieties along the network. The hybrid material was studied by means of different characterization techniques (TGA, NMR and IR spectroscopy, chemical and elemental analyses, TEM, and textural measurements), verifying the stability and integrity of the asymmetric active sites in the solid. The hybrid material, HybPyr, is an excellent asymmetric heterogeneous and recyclable catalyst for enantioselective Michael addition of linear aldehydes to -nitrostyrene derivatives with high stereocontrol of the reaction products., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P, MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. S. Ll. thanks predoctoral fellowships from MINECO for economical support (BES-2015-072627). The authors thank the MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dandelion-Like Microspherical MCM-22 Zeolite Using BP 2000 as a Hard Template

  • Schwanke, Anderson
  • Villarroel-Rocha, Jhonny
  • Sapag, Karim
  • Pergher, Sibele
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The chemistry between layered MWW zeolite and carbon black pearls (BP 2000) as an inexpensive hard template was investigated to develop a rational one-pot synthesis of MCM-22 microspheres. The characterization results showed that the insertion of BP 2000 in the gel synthesis did not substantially compromise the crystallinity and microporosity, and the microscopic analyses showed that BP 2000 played a key role in controlling the final morphology of the MCM-22 zeolite, creating beautiful dandelion-like microspherical particles. The morphology obtained is due to the tortuous shape of the hard template, the particular MWW particle crystals, the interaction with the external surface of the MWW zeolitic precursor, and the synthesis conditions. The stacking of MWW crystals with edge-to-face orientations generates meso-/macrovoids, allowing access to the interiors of the microspheres. The microspheres were homogeneous with sizes ranging from 6 to 8 mu m with an increase of the external surface and a macroporous size distribution centered at 200 nm, which is two times that of the traditional MCM-22 zeolite, A.J.S. is grateful to the CAPES Foundation and PDSE program (process number 99999.004779/2014-02) from the Ministry of Education of Brazil. U.D. and A.C. acknowledge funding by the Spanish Government (Severo Ochoa program SEV-2012-0267 and MAT2014-52085-C2-1-P) and the Generalitat Valenciana (Prometeo). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch. S.P. and K.S. acknowledge the CAPES-CAFP project number 054/14.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photocatalytic production of hydrogen from biomass-derived feedstocks

  • Puga, Alberto V.
[EN] The application of photocatalysis for the utilisation of sunlight energy is intensely investigated in present times, particularly in prospect of generating solar fuels by hydrogen production or CO2 reduction processes as tools for societies aiming to relief their thirst for fossil resources. From the perspective of sustainability, the rational use of biomass-derived feedstocks for photocatalytic H2 production is a feasible, proven and highly efficient process. In this review, in addition to delving into physico-chemical fundamentals of photocatalytic processes on semiconductors, the research activity on this topic related to the design of revolutionary semiconductor-based materials, generally including metallic nanoparticles or complexes as hydrogen-evolving co-catalysts, is outlined and critically evaluated. Moreover, the use of sunlight and renewable feedstocks for the generation of hydrogen, as a compelling opportunity for the energy sector, is emphasised. Special focus is also set on the valorisation of biorefinery products, agricultural residues and industrial or municipal waste., Financial support from the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267) is acknowledged. The European Union is also acknowledged for the SynCatMatch project (ERC-AdG-2014-671093).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The acid-base and redox reactivity of CeO2 nanoparticles: Influence of the Hubbard U term in DFT plus U studies

  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • López Auséns, Javier Tirso
[EN] The interaction of small molecules with acid-base and redox centers in small Ce21O42 nanoparticles has been theoretically investigated using the DFT + U approach with the PW91 functional and U = 0.2 and 4 eV, in order to determine the influence of the U value on the trends observed in selected properties describing such interactions. CO adsorption at low coordinated Ce4+ Lewis acid centers, water adsorption and dissociation at acid-base pairs, formation of oxygen vacancy defects by removal of an oxygen atom from the system, and interaction of molecular O-2 with such defects have been considered. The largest effect of the value of U is found for the description of the reduced Ce21O41 nanoparticle. In all other cases involving stoichiometric and oxidized Ce21O42 and Ce21O43 systems, the trends in the calculated adsorption and reaction energies, optimized geometries, charge distribution, and vibrational frequencies are quite similar at the three levels considered., Financial support from the Spanish Science and Innovation Ministry (Consolider Ingenio 2010-MULTICAT CSD2009-00050 and Subprograma de apoyo a Centros y Universidades de Excelencia Severo Ochoa SEV 2012 0267) is acknowledged. The European Union is also acknowledged by ERC-AdG-2014-671093 — SynCatMatch. Red Española de Supercomputación (RES) and Centre de Càlcul de la Universitat de València are gratefully acknowledged for computational facilities and technical assistance. T. L.-A. thanks ITQ for a contract. We thank Konstantin Neyman for providing the Ce21O42 nanoparticle model.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Heteroatoms-Stabilized Single Palladium Atoms on Amorphous Zeolites: Breaking the Tradeoff between Catalytic Activity and Selectivity for Alkyne Semihydrogenation

  • Bai, Risheng
  • He, Guangyuan
  • Li, Junyan
  • Li, Lin
  • Zhang, Tianjun
  • Wang, Xingxing
  • Zhang, Wei
  • Zou, Yongcun
  • Zhang, Jichao
  • Mei, Donghai
  • Yu, Jihong
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] As a fundamental industrial catalytic process, the semihydrogenation of alkynes presents a challenge in striking a balance between activity and selectivity due to the issue of over-hydrogenation. Herein, we develop an efficient catalytic system based on single-atom Pd catalysts supported on boron-containing amorphous zeolites (Pd/AZ-B), achieving the tradeoff breaking between the activity and selectivity for the selective hydrogenation of alkynes. Advanced characterizations and theoretical density functional theory calculations confirm that the incorporated B atoms in the Pd/AZ-B can not only alter the geometric and electronic properties of Pd atoms by controlling the electron migration from Pd but also mitigate the interaction between alkene and the catalyst supports. This boosts the exceptional catalytic efficacy in the semihydrogenation of phenylacetylene to styrene under mild conditions (298 K, 2 bar H2), achieving a recorded turnover frequency (TOF) value of 24198 h-1 and demonstrating 95 % selectivity to styrene at full conversion of phenylacetylene. By comparison, the heteroatom-free amorphous zeolite-anchored Pd nanoparticles and the commercial Lindlar catalyst have styrene selectivities of 73 % and 15 %, respectively, under identical reaction conditions. This work establishes a solid foundation for developing highly active and selective hydrogenation catalysts by controllably optimizing their electronic and steric properties.; An efficient catalytic system based on single-atom Pd catalysts supported on heteroatom (B, Al, or Ga)-containing amorphous zeolite, achieves the tradeoff breaking between the activity and selectivity for the semihydrogenation of alkynes, demonstrating a recorded turnover frequency value of 24198 h-1 and high styrene selectivity (95 %). image, The authors thank the National Key Research and Development Program of China (Grant 2021YFA1501202), the National Natural Science Foundation of China (Grant 22288101, 21920102005, 12374019, and 12235011), the '111 Center' (B17020), the European Union through the European Research Council (Grant ERC-AdG-2014-671093, SynCat-Match), and the Spanish Government through "Severo Ochoa" (SEV-2016-0683, MINECO) for supporting this work. R. B. thanks the National Natural Science Foundation of China (Grant 22201094) and the Jilin Youth Growth Science and Technology Plan Project (Grant 20230508189RC) for funding. The Centre for High-resolution Electron Microscopy (C & hstrok;EM), supported by SPST of ShanghaiTech University under Contract EM02161943 is acknowledged for their help on electron microscopy. Beamline BL14W1 of the Shanghai Synchrotron Radiation Facility (SSRF, China) is acknowledged for providing the beamtime.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Machine Learning Applied to Zeolite Synthesis: The Missing Link for Realizing High-Throughput Discovery

  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Román-Leshkov, Yuriy
[EN] CONSPECTUS: Zeolites are microporous crystalline materials with well-defined cavities and pores, which can be prepared under different pore topologies and chemical compositions. Their preparation is typically defined by multiple interconnected variables (e.g., reagent sources, molar ratios, aging treatments, reaction time and temperature, among others), but unfortunately their distinctive influence, particularly on the nucleation and crystallization processes, is still far from being understood. Thus, the discovery and/or optimization of specific zeolites is closely related to the exploration of the parametric space through trial-and-error methods, generally by studying the influence of each parameter individually. In the past decade, machine learning (ML) methods have rapidly evolved to address complex problems involving highly nonlinear or massively combinatorial processes that conventional approaches cannot solve. Considering the vast and interconnected multiparametric space in zeolite synthesis, coupled with our poor understanding of the mechanisms involved in their nucleation and crystallization, the use of ML is especially timely for improving zeolite synthesis. Indeed, the complex space of zeolite synthesis requires draWing inferences from incomplete and imperfect information, for which ML methods are very well-suited to replace the intuition-based approaches traditionally used to guide experimentation. In this Account, we contend that both existing and new ML approaches can provide the "missing link" needed to complete the traditional zeolite synthesis workflow used in our quest to rationalize zeolite synthesis. Within this context, we have made important efforts on developing ML tools in different critical areas, such as (1) data-mining tools to process the large amount of data generated using high-throughput platforms; (2) novel complex algorithms to predict the formation of energetically stable hypothetical zeolites and guide the synthesis of new zeolite structures; (3) new "ab initio" organic structure directing agent predictions to direct the synthesis of hypothetical or known zeolites; (4) an automated tool for nonsupervised data extraction and classification from published research articles. ML has already revolutionized many areas in materials science by enhancing our ability to map intricate behavior to process variables, especially in the absence of well-understood mechanisms. Undoubtedly, ML is a burgeoning field with many future opportunities for further breakthroughs to advance the design of molecular sieves. For this reason, this Account includes an outlook of future research directions based on current challenges and opportunities. We envision this Account will become a hallmark reference for both well-established and new researchers in the field of zeolite synthesis., This work has been supported by the EU through ERC-AdG2014-671093, by the Spanish Government through SEV-20160683 and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE), and by La Caixa-Foundation through MIT -SPAIN MISTI program (LCF/PR/MIT17/11820002). Y.R.-L. thanks the DoE for funding through the Office of Basic Energy Sciences (DE-SC0016214).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Activation of n-pentane while prolonging HZSM-5 catalyst lifetime during its combined reaction with methanol or dimethyl ether

  • Cordero-Lanzac, Tomás
  • Aguayo, Andrés T.
  • Castaño, Pedro
  • Bilbao, Javier
  • Martínez, Cristina|||0000-0002-4415-084X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] This work explores the synergies during combined reactions of n-pentane (nC5) with oxygenates (methanol or dimethyl ether, OX). The experimental runs have been carried out in a packed bed reactor at 500 °C, using a high silica HZSM-5 zeolite-based catalyst with different oxygenate-to-n-pentane (OX/nC5) ratios in the feed. A significant enhancement of the n-pentane conversion occurs for low OX/nC5 ratios in the feed (0.1¿0.25), especially when using dimethyl ether (DME). In addition, the presence of n-pentane reduces the rate of catalyst deactivation by coking during the conversion of oxygenates. These results have been explained on the grounds of a mechanistic interaction between the reactants: (1) the fast formation of methoxy and olefin intermediates from oxygenates, particularly from DME, could explain the promotion of n-pentane cracking, by facilitating the activation of the alkane by hydrogen transfer reactions; (2) the attenuation of deactivation during the conversion of oxygenates could be related to a lower extent of the arene cycle in the dual-cycle mechanism (limiting the polymethylbenzene formation). The analyses of used catalysts by means of temperature-programmed oxidation and confocal fluorescence microscopy have pointed out the higher reactivity of DME than that of methanol also for yielding coke structures., TC-L, ATA, PC and JB acknowledge the financial support received by the Spanish Ministry of Economy and Competitiveness with some ERDF funds (CTQ2016-77812-R,CTQ2016-79646-P), the Basque Government (IT1218-19) and the European Commission (HORIZON H2020-MSCA RISE-2018. Contract No. 823745). TC-L also acknowledges the Spanish Ministry of Education, Culture and Sport for the award of the FPU grant (FPU15-01666) and the additional mobility grant (EST17-00094). CM and AC acknowledge national and regional funding (MICINN/GVA) through `Severo Ochoa"(SEV-2016-0683), RTI2018-101033-B-I00 and AICO/2019/060 and financial support from EU by ERC-AdG-2014671093(SynCatMatch) and from the Fundacion Ramon Arecesthrough a research contract of the "Life and Materials Science" program. The authors also thank Dr. Ricardo Andrade of the SGIker of UPV/EHU for the support provided with the CFM technique.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tuning the Catalytic Performance of Cobalt Nanoparticles by Tungsten Doping for Efficient and Selective Hydrogenation of Quinolines under Mild Conditions

  • Puche Panadero, Marta|||0000-0002-9390-5532
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Liu, Lichen
  • Sorribes-Terrés, Iván
[EN] Non-noble bimetallic CoW nanoparticles (NPs) partially embedded in a carbon matrix (cow@c) have been prepared by a facile hydrothermal carbon-coating methodology followed by pyrolysis under an inert atmosphere. The bimetallic NPs, constituted by a multishell core-shell structure with a metallic Co core, a W-enriched shell involving Co7W6 alloyed structures, and small WO3 patches partially covering the surface of these NPs, have been established as excellent catalysts for the selective hydrogenation of quinolines to their corresponding 1,2,3,4-tetrahydroquinolines under mild conditions of pressure and temperature. It has been found that this bimetallic catalyst displays superior catalytic performance toward the formation of the target products than the monometallic Co@C, which can be attributed to the presence of the CoW alloyed structures., Financial support from the Spanish MINECO (Severo Ochoa excellence program SEV-2016-0683) and the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) is gratefully acknowledged. I.S. acknowledges funding by the Generalitat Valenciana (SEJI/2020/018). The authors also thank the Electron Microscopy Service of the UPV for TEM and STEM facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Making Nanosized CHA Zeolites with Controlled Al Distribution for Optimizing Methanol-to-Olefin Performance

  • Gallego-Sánchez, Eva María
  • Li, Chengeng
  • Martín-García, Nuria
  • Paris, Cecilia|||0000-0002-5673-8114
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] From theoretical calculations and a rational synthesis methodology, it has been possible to prepare nanocrystalline (60-80 nm) chabazite with an optimized framework Al distribution that has a positive impact on its catalytic properties. This is exemplified for the methanol-to-olefin (MTO) process. The nanosized material with the predicted Al distribution maximizes the formation of the required MTO hydrocarbon pool intermediates, while better precluding excessive diffusion pathways that favor the rapid catalyst deactivation by coke formation., This work has been supported by the EU through ERC-AdG-2014-671093, by the Spanish Government-MINECO through "Severo Ochoa" (SEV-2016-0683) and MAT2015-71261-R, and by the Fundacion Ramon Areces through a research contract of the "Life and Materials Science" program. E.M.G. acknowledges "La Caixa-Severo Ochoa" International PhD Fellowships (call 2015), C.L. acknowledges China Scholarship Council (CSC) for a Ph.D fellowship, and N.M. thanks MINECO for a pre-doctoral fellowship (BES-2013-064347). Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are gratefully acknowledged for computational resources.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simple organic structure directing agents for synthesizing nanocrystalline zeolites

  • Gallego-Sánchez, Eva María
  • Díaz-Rey, Maria Del Rocio
  • Martínez Armero, Marta Evelia
  • Paris, Cecilia|||0000-0002-5673-8114
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Martínez, Cristina|||0000-0002-4415-084X
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The synthesis of the ZSM-5 and beta zeolites in their nanosized form has been achieved by using simple alkyl-substituted mono-cationic cyclic ammonium cations as OSDA molecules. The particular combination of a cyclic fragment and a short linear alkyl-chain group (preferentially C4) within the monocationic OSDA molecules allows directing the crystallization of nanosized zeolites with excellent solid yields (above 90%). Interestingly, the formation of the nanosized ZSM-5 and beta zeolites mostly depends on the size and nature of the cyclic fragment of the OSDA molecule, resulting in all cases in nanocrystalline solids with homogeneous distributions of particle sizes (similar to 10-25 nm) and controlled Si/Al molar ratios (similar to 15-30). The achieved nanosized ZSM-5 and beta zeolites have been extensively characterized by different techniques to study their physico-chemical properties, such as chemical composition, pore accessibility or Bronsted acidity, among others. Moreover, the catalytic properties of the nanosized ZSM-5 and beta zeolites have been evaluated for different chemical reactions, including methanol-to-olefins (MTO) in the case of ZSM-5, and alkylation of benzene with propylene to obtain cumene and oligomerization of light olefins to liquid fuels in the case of beta, observing in all cases improved catalytic activity and product selectivity towards target products when compared to related catalysts., This work has been supported by the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267), MAT2015-71261-R and CTQ2015-70126-R, by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Fundacion Ramon Areces through a research contract of the "Life and Materials Science" program. E. M. G. and M. R. D-R. acknowledge "La Caixa - Severo Ochoa" International PhD Fellowships (call 2015). M. E. M-A. thanks MINECO for economical support through pre-doctoral fellowship (BES-2013-066800). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Non-noble metal catalysts for hydrogenation: A facile method for preparing Co nanoparticles covered with thin layered carbon

  • Liu, Lichen
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
Metallic cobalt nanoparticles with surface CoOx patches covered by thin layered carbon (named Co@C) have been directly synthesized by thermal decomposition of Co-EDTA complex. Raman spectra and HRTEM images suggest that discontinuities can be found in the disordered layered carbon. XPS shows that the CoOx patches in the Co@C nanoparticles can reduced to metallic Co by H-2 under reaction conditions (7 bar at 120 degrees C), and H-2-D-2 exchange experiments show that the reduced metallic Co nanoparticles covered by carbon layers can dissociate H-2. The Co@C nanoparticles show excellent activity and selectivity during chemoselective hydrogenation of nitroarenes for a wide scope of substrates under mild reaction conditions. Based on the results from DRIFTS adsorption experiments, we propose that metallic Co in the Co@C nanoparticles is the active phase. The role of the carbon layers is to protect the Co from overoxidation by air, leading to the chemoselective hydrogenation of nitroarenes. (C) 2016 Elsevier Inc. All rights reserved., L.L. thanks ITQ for a contract. The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch. The authors also thank the Microscopy Service of UVP for kind help with TEM and STEM measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Control of the Reaction Mechanism of Alkylaromatics Transalkylation by Means of Molecular Confinement Effects Associated to Zeolite Channel Architecture

  • Margarit Benavent, Vicente Juan
  • OSMAN, MOGAHID
  • Al-Khattaf, Sulaiman
  • Martínez, Cristina|||0000-0002-4415-084X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Transalkylation of alkylaromatics catalyzed by acid zeolites is a process widely employed in the petrochemical industry for upgrading aromatic fractions. The reaction mechanism is complex as it can proceed either by intermolecular alkyl-transfer involving dealkylation-alkylation steps with surface alkoxy species as reaction intermediates or through the formation of bulkier diaryl intermediates. We have investigated how the possible formation of such bulky intermediates in the microporous channel system of different zeolite structures, together with their stabilization by confinement effects, can determine the preferential mechanism and, therefore, the selectivity of ethylbenzene disproportionation into benzene and diethylbenzene. For testing the concept, four zeolites, MCM-22 (3D MWW) with 1OR pores, 12R cavities and external 12R hemicavities or "cups", DS-ITQ2, (2D MWW) with the same 1OR channels as MCM-22, no 12R cavities and much larger proportion of external "cups", a 10R ZSM-5 (MFI) and a 12R mordenite (MOR) have been used. The higher activity of DS-ITQ2 and MCM-22 as compared to ZSM-5 at low temperature (573 K) and the high selectivity to diethylbenzene of the bidimensional material under all reaction conditions considered have been explained by means of DFT calculations. Contrary to what could be expected according to the available space at the external "cups" and at the lOR channels of the MWW structure, the bulkier diaryl intermediates are better stabilized within the lOR channel system than at the "cups" open at the external surface of the MWW materials. We show from this perspective how the channel structure and molecular confinement stabilization also explain the operating reaction mechanism in ZSM-5 and mordenite., This work was supported by the Spanish Government through "Severo Ochoa Program" (SEV 2012-0267; SEV-2016-0683), RTI2018-101033-B-I00 and MAT2017-82288-C2-1-P, by the Fundacion Ramon Areces through a research contract of the "Life and Materials Science" program, and by the European Union through ERC-AdG-2014-671093 (SynCatMatch). Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are gratefully acknowledged for computational resources and technical support. We thank the Electron Microscopy Service of the UPV for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Generation of gold nanoclusters encapsulated in an MCM-22 zeolite for the aerobic oxidation of cyclohexane

  • Liu, Lichen
  • Arenal, Raul
  • Meira, Debora M.
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] In this work, we will report the generation of Au clusters in a purely siliceous MCM-22 zeolite. The catalytic properties of these Au clusters have been tested for the selective oxidation of cyclohexane to cyclohexanol and cyclohexanone (KA-oil). The Au clusters encapsulated in the MCM-22 zeolite are highly active and selective for the oxidation of cyclohexane to KA-oil, which is superior to Au nanoparticles on the same support. These results suggest that Au clusters are highly active for the activation of oxygen to produce radical species., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683). The authors also thank the Microscopy Service of UPV for kind help with TEM and STEM measurements. Mr J. A. Gaona is greatly acknowledged for his very helpful assistance on the catalytic studies. The XAS data were acquired at European Synchrotron Radiation Facility. The HAADF-HRSTEM studies were conducted in the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA)-Universidad de Zaragoza (Spain), Spanish ICTS National facility. R. A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fe-Containing Zeolites for NH3-SCR of NOx: Effect of Structure, Synthesis Procedure, and Chemical Composition on Catalytic Performance and Stability

  • Martín-García, Nuria
  • Vennestrom
  • Peter Nicolai Ravnborg
  • Thogersen, Joakim Reimer
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The direct preparation of different iron-containing Beta and CHA zeolites has been attempted under diverse synthesis conditions, including in alkaline and fluoride media, to evaluate the influence of their physicochemical properties on the selective catalytic reduction (SCR) of NOx using NH3 as reductant. Of the different Fe-Beta zeolites, the sample prepared in the absence of alkali cations with a Si/Al ratio of around 13 showed high NO conversion values (>90%). However, this catalyst suffered from severe deactivation when aged at high temperatures in the presence of steam. The preparation of more hydrophobic Fe-Beta zeolites did not improve the resistance of the catalyst against steam. In contrast, Fe-CHA zeolites prepared by a one-pot method under alkaline conditions with a Si/Al ratio of around 13 by using N,N,N-trimethyladamantylammonium as template not only showed excellent catalytic activity but also high hydrothermal stability, especially when sodium cations were selectively removed. Moreover, the Fe-CHA material synthesized by using the less expensive tetraethylammonium template also resulted in an active and hydrothermally stable catalyst., This work has been supported by Haldor Topsoe A/S, by the Spanish Government MINECO ("Severo Ochoa", SEV-2016-0683, and MAT2015-71261-R), by the European Union (ERC-AdG-2014-671093, SynCatMatch), and by the Fundacion Ramon Areces through a research contract from the "Life and Materials Science" program. N.M. thanks MINECO for economic support through a pre-doctoral fellowship (BES-2013-064347). The authors thank Isabel Millet for technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reversible Transformation of Pt Nanoparticles into Single Atoms inside High-Silica Chabazite Zeolite

  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Serna Merino, Pedro Manuel
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Gabay, Jadeene E.
  • Kliewer, Chris E.
  • Carr, Robert T.
  • Guzman, Javier
  • Casty, Gary L.
[EN] We report the encapsulation of platinum species in highly siliceous chabazite (CHA) crystallized in the presence of N,N,N-trimethyl-1-adamantammonium and a thiol-stabilized Pt complex. When compared to Pt/SiO2 or Pt-containing Al-rich zeolites, the materials in this work show enhanced stability toward metal sintering in a variety of industrial conditions, including H-2, O-2, and H2O. Remarkably, temperatures in the range 650-750 degrees C can be reached without significant sintering of the noble metal. Detailed structural determinations by X-ray absorption spectroscopy and aberration-corrected high-angle annular dark-field scanning transmission electron microscopy demonstrate subtle control of the supported metal structures from similar to 1 nm nanoparticles to site-isolated single Pt atoms via reversible interconversion of one species into another in reducing and oxidizing atmospheres. The combined used of microscopy and spectroscopy is critical to understand these surface-mediated transformations. When tested in hydrogenation reactions, Pt/CHA converts ethylene (similar to 80%) but not propylene under identical conditions, in contrast to Pt/SiO2, which converts both at similar rates. These differences are attributed to the negligible diffusivity of propylene through the small-pore zeolite and provide final evidence of the metal encapsulation., This work has been supported by the European Union through the SYNCATMATCH project (Grant Agreement No. 671093) and the Spanish Government through "Severo Ochoa Program" (SEV 2012-0267) and MAT2015-71261-R. This research used beamline 9-BM of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. We thank Isabel Millet and Paul Stevens for technical assistance, and Randall Meyer, Aaron Sattler, and Dave Marler for review of the manuscript. We appreciate the support of ExxonMobil Research and Engineering for our efforts in fundamental catalytic research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Building zeolites from precrystallized units: nanoscale architecture

  • Li, Chengeng
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Since the early reports by Barrer in the 1940s on converting natural minerals into synthetic zeolites, the use of precrystallized zeolites as crucial inorganic directing agents to synthesize other crystalline zeolites with improved physicochemical properties has become a very important research field, allowing the design, particularly in recent years, of new industrial catalysts. This Review highlights how the presence of some crystalline fragments in the synthesis media, such as small secondary building units (SBUs) or layered substructures, not only favors the crystallization of other zeolites with similar SBUs or layers, but also permits control over important parameters affecting their catalytic activity (chemical composition, crystal size, or porosity, etc.). Recent advances in the preparation of 3D and 2D zeolites through seeding and zeolite-to-zeolite transformation processes will be discussed extensively in this Review, including their preparation in the presence or absence of organic structure-directing agents (OSDAs). The aim is to introduce general guidelines for more efficient approaches for target zeolites., This work has been supported by the Spanish Government (MINECO through "Severo Ochoa" (SEV-2016-0683) and MAT2015-71261-R), by the European Union through ERC-AdG-2014-671093 (SynCatMatch), and by the Fundacion Ramon Areces (through the "Life and Materials Science" program).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced Stability of Cu Clusters of Low Atomicity against Oxidation. Effect on the Catalytic Redox Process

  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • García García, Saray
  • Fernández-Villanueva, Estefanía
[EN] By a combination of theoretical modeling and XPS and SERS spectroscopic studies, it has been found that it is possible to stabilize metallic copper species under oxidizing reaction conditions by adjusting the atomicity of subnanometer copper clusters. Small Cu-5 clusters display low reactivity toward O-2 dissociation, being less susceptible to oxidation than larger Cu-8 or Cu-20 systems. However, in the presence of water this reactivity is strongly enhanced, leading to oxidized Cu-5 clusters. In that case, the interaction of Cu-5 with atomic O oxygen is weak, favoring recombination and O-2 desorption, suggesting an easier transfer of O atoms to other reactant molecules. In contrast, copper clusters of higher atomicity or nanoparticles, such as Cu-5 and Cu-20, are easily oxidized in the presence of O-2, leading to very stable reactive O atoms, resulting in low reactivity and selectivity in many oxidation reactions. Altogether, Cu-5, clusters are proposed as promising catalysts for catalytic applications where stabilization of metallic copper species is strongly required., The authors thank the MINECO (Consolider Ingenio 2010-MULTICAT CSD2009-00050 and Severo Ochoa program SEV-2012-0267), Generalitat Valenciana (PROMETEOII/2013/011 Project), and European Union (ERC-AdG-2014-671093-SynCatMatch) for financial support. E.F. and S.G.-G. thank the MINECO for their fellowship SVP-2013-068146 and financial support through project MAT2011-28009, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of Zeolite Framework Composition and Flexibility on Methanol-To-Olefins Selectivity: Confinement or Diffusion?

  • Ferri-Vicedo, Pau
  • Li, Chengeng
  • Millán-Cabrera, Reisel|||0000-0002-4489-5411
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The methanol-to-olefins reaction catalyzed by small-pore cage-based acid zeolites and zeotypes produces a mixture of short chain olefins, whose selectivity to ethene, propene and butene varies with the cavity architecture and with the framework composition. The product distribution of aluminosilicates and silicoaluminophosphates with the CHA and AEI structures (H-SSZ-13, H-SAPO-34, H-SSZ-39 and H-SAPO-18) has been experimentally determined, and the impact of acidity and framework flexibility on the stability of the key cationic intermediates involved in the mechanism and on the diffusion of the olefin products through the8rwindows of the catalysts has been evaluated by means of periodic DFT calculations and ab initio molecular dynamics simulations. The preferential stabilization by confinement of fully methylated hydrocarbon pool intermediates favoring the paring pathway is the main factor controlling the final olefin product distribution., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), Spanish Government through "Severo Ochoa" (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE), and by Generalitat Valenciana through AICO/2019/060. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Espanola de Supercomputacion (RES) and Servei d'Informatica de la Universitat de Valencia (SIUV) are acknowledged for computational resources and technical support. P.F. and R.M. thank ITQ for their contracts. C.L. acknowledges China Scholarship Council (CSC) for a Ph.D fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of reaction-adapted zeolites as methanol-to-olefins catalysts with mimics of reaction intermediates as organic structure-directing agents

  • Li, Chengeng
  • Paris, Cecilia|||0000-0002-5673-8114
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Catalysis with enzymes and zeolites have in common the presence of well-defined single active sites and pockets/cavities where the reaction transition states can be stabilized by longer-range interactions. We show here that for a complex reaction, such as the conversion of methanol-to-olefins (MTO), it is possible to synthesize reaction-adapted zeolites by using mimics of the key molecular species involved in the MTO mechanism. Effort has focused on the intermediates of the paring mechanism because the paring is less favoured energetically than the side-chain route. All the organic structure-directing agents based on intermediate mimics crystallize cage-based small-pore zeolitic materials, all of them capable of performing the MTO reaction. Among the zeolites obtained, RTH favours the whole reaction steps following the paring route and gives the highest propylene/ethylene ratio compared to traditional CHA-related zeolites (3.07 and 0.86, respectively).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Ab initio design of efficient zeolite catalysts for methanol and hydrocarbons conversion

  • Ferri Vicedo, Pau
[ES] Toda esta disertación ha utilizado la química computacional como herramienta fundamental para el análisis científico. Por ello, en el Capítulo 2 se explican los modelos y métodos teóricos sobre este tema. La primera parte del capítulo se centra en los fundamentos de la química cuántica y, en concreto, se explica con detalle la Teoría del Funcional de la Densidad la cual constituye la base de los métodos computacionales aplicados. En esta sección, las nociones básicas del método Hartree-Fock sirven de prólogo a la DFT. El Capítulo 3 presenta los primeros resultados de este trabajo correspondientes a la reacción de metanol a olefinas catalizada por diferentes zeolitas con cavidades de poro pequeño. Esta reacción es un proceso industrial relevante que produce olefinas de cadena corta como eteno (C2=), propeno (C3=) y buteno (C4=) a escala industrial a partir de la biomasa. El sistema catalítico comprende tanto la estructura inorgánica de la zeolita que contiene los sitios ácidos Brønsted como las especies orgánicas confinadas, que forman la "hydrocarbon pool" y producen olefinas ligeras mediante pasos sucesivos de metilación y craqueo. Hemos centrado nuestros esfuerzos en comprender la naturaleza de la "hydrocarbon pool", una molécula de benceno polimetilada, y sus mecanismos de reacción para poder discernir entre ellos e identificar los catalizadores adecuados para mejorar la producción de propeno o eteno en función de la topología de cada cavidad zeolitica. Hemos podido identificar el grado de metilación de la "hydrocarbon pool" como el factor clave para potenciar el mecanismo de la ruta "paring", donde el propeno es el producto mayoritario, o el mecanismo de la ruta "side-chain", siendo el eteno el producto predominante. Este hallazgo nos permite establecer una relación entre la estabilización de los dos intermedios clave y la selectividad experimental observada con un alto grado de correlación. En el Capitulo 4 presentamos una nueva herramienta para el estudio de reacciones competitivas catalizadas por zeolitas. Utilizando un cribado computacional rápido con "force fields" para los intermedios clave de la reacción y un detallado estudio mecanístico usando la teoría del funcional de la densidad somos capaces de reconocer y cuantificar sutiles diferencias en la estabilización de intermedios y estados de transición dentro de huecos microporosos similares, aproximándonos así al nivel de reconocimiento molecular de las enzimas. Con estas herramientas somos capaces de seleccionar como catalizador una zeolita que obstaculice el mecanismo "alkyl-transfer" reduciendo la producción de eteno no deseado y potenciando al mismo tiempo el mecanismo "diaryl-mediated pathway". También somos capaces de obstaculizar la desproporción de dietilbenceno, una ruta no deseada del mecanismo "diaryl-mediated pathway" que conduce a la producción de trietilbenceno, mientras que se favorece la transalquilación de dietilbenceno aumentando el rendimiento obtenido de etilbenceno. en la primera sección del Capítulo 5, estudiamos la afinidad energética de cationes alquilamonio comercialmente disponibles con ligeras diferencias en sus grupos alquilo, TEA, MTEA y DMDEA, para la síntesis de CHA y sus efectos sobre la calidad del material obtenido. Evaluamos las energías de interacción entre la zeolita y el catión de diferentes combinaciones de agentes directores y cationes Na+ con métodos DFT periódicos pudiendo distinguir pequeños efectos de estabilización causados por ligeras diferencias estructurales entre moléculas que repercuten en la estructura final sintetizada. Durante la segunda sección del Capítulo 5, identificamos las características estructurales de diferentes agentes directores de estructura para la síntesis de AEI que mejoran las probabilidades de dispersión del Al en posiciones tetraédricas distintas de T1 obteniendo un catalizador AEI diferente de los sintetizados clásicamente., [CA] Tota aquesta dissertació utilitza la química computacional com eina fonamental per a l'anàlisi científica. Per això, en el Capítol 2 s'expliquen els models i mètodes teòrics sobre aquest tema. La primera part del capítol es centra en els fonaments de la química quàntica i, en concret, s'explica amb detall la Teoria del Funcional de la Densitat la qual constitueix la base dels mètodes computacionals aplicats. En aquesta secció, les nocions bàsiques del mètode Hartree-Fock serveixen de pròleg a la DFT. El Capítol 3 presenta els primers resultats d'aquest treball corresponents a la reacció de metanol a olefines catalitzada per diferents zeolites amb cavitats de porus petit. Aquesta reacció és un procés industrial rellevant que produeix olefines de cadena curta com etè (C2=), propè (C3=) i butè (C4=) a escala industrial a partir de la biomassa. El sistema catalític comprèn tant l'estructura inorgànica de la zeolita que conté els llocs àcids Brønsted com les espècies orgàniques confinades, que formen la "hydrocarbon pool" i produeixen olefines lleugeres mitjançant passos successius de metilació i craqueig. Hem centrat els nostres esforços en comprendre la naturalesa de la "hydrocarbon pool", una molècula de benzè polimetilada, i els seus mecanismes de reacció per a poder discernir entre ells i identificar els catalitzadors adequats per millorar la producció de propè o etè en funció de la topologia de cada cavitat zeolitica. Hem pogut identificar el grau de metilació de la "hydrocarbon pool" com el factor clau per a potenciar el mecanisme de la ruta "paring", on el propè és el producte majoritari, o el mecanisme de la ruta "side-chain", sent l'etè el producte predominant. Al Capítol 4 presentem una nova eina per a l'estudi de reaccions competitives catalitzades per zeolites. Utilitzant un cribratge computacional ràpid amb "force fields" per als intermedis clau de la reacció i un detallat estudi mecanístic amb la teoria del funcional de la densitat som capaços de reconèixer i quantificar subtils diferències en l'estabilització d'intermedis i estats de transició dins de buits microporosos similars, aproximant-nos així al nivell de reconeixement molecular dels enzims. en la primera secció del Capítol 5, estudiem l'afinitat energètica de cations alquilamoni comercialment disponibles amb lleugeres diferències als seus grups alquil, TEA, MTEA i DMDEA, per a la síntesi de CHA i els seus efectes sobre la qualitat del material obtingut. Avaluem les energies d'interacció entre la zeolita i el catió entre diferents combinacions d'agents directors i cations Na+ amb mètodes DFT periòdics podent distingir petits efectes d'estabilització causats per lleugeres diferències estructurals entre molècules que repercuteixen en l'estructura final sintetitzada. Durant la segona secció del Capítol 5, identifiquem les característiques estructurals de diferents agents directors d'estructura per a la síntesi d'AEI que milloren les probabilitats de propagació de l'Al a través de posicions tetrahedriques diferents de T1 obtenint un catalitzador AEI diferent dels sintetitzats clàssicament., [EN] Computational chemistry has been used as the fundamental tool during the whole work. Therefore, the theoretical models and methods on this subject are explained in Chapter 2. The first part sketches the fundamentals of quantum chemistry and specifically explains the Density Functional Theory that constitutes the basis of the computational methods applied. In this section, basic notions of the Hartree-Fock method serve as prologue for DFT after which more practical aspects are elucidated. Chapter 3 presents the first results of this work corresponding to the methanol to olefins reaction catalysed by different small-pore cage-like zeolites. This reaction is a relevant process that produces short chain olefins such as ethene, propene and butene at industrial scale from biomass. The catalytic system comprises both the zeolite inorganic framework containing the Brønsted acid sites and the confined organic species, that form the hydrocarbon pool and produce light olefins by successive methylation and cracking steps. Our efforts are focused on understanding the nature of the hydrocarbon pool, a polymethylated benzene molecule, and its reaction mechanisms in order to be able to discern between them and identify the proper catalysts to enhance propene or ethene production based on each zeolite cavity topology. We have been able to identify the hydrocarbon pool methylation degree as the key factor to enhance paring route mechanism where propene is the predominant product, or side-chain mechanism, with ethene being the predominant product. This finding enables us to establish a relation between the stabilization of the two key intermediates and the experimental selectivity observed with a high degree of correlation. In Chapter 4 we present a new tool for the study of competing reactions catalyzed by zeolites. Using a fast computational screening with force fields for the key intermediates of the reaction and a detailed density functional theory mechanistic study we are able to recognize and quantify subtle differences in the stabilization of intermediates and transition states within similar microporous voids, thus approaching the level of molecular recognition of enzymes. With these tools we are able to select a zeolite catalyst that hinders alkyl-transfer mechanism reducing the production of non-desired ethene while enhancing the diaryl-mediated pathyways mechanism. Once we discard the non-desired mechanism, we are also able to hinder the diethylbenzene disproportionation, a non-desired route of the diaryl-mediated pathways that leads to triethylbenzene production, while favouring diethylbenzene transalkylation increasing the obtained yield of ethylbenzene. To close this chapter, the theoretical results are compared with experimental selectivities obtained for eight candidate zeolites obtaining a good correlation between theory and experiment. in the first section of Chapter 5, we study the energetic affinity of commercially available alkylammonium cations with slight differences on their alkyl chain groups, as TEA, MTEA and DMDEA, for CHA synthesis and its effects on the quality of the material obtained. We evaluate the host-guest interaction energies of different combinations of OSDAs and Na+ cations with periodic DFT methods being able to distinguish small stabilization effects caused by slight structural differences between molecules that have an impact on the final structure synthesized. On the other hand, we present a new theoretical methodology to address Al positioning prediction in SSZ-39 zeolite with the AEI framework. During the second section of Chapter 5, we identify the structural features of different OSDAs for AEI synthesis that improve the probabilities of spreading Al through different T-site positions other than T1 obtaining an AEI catalyst different from the classically synthesized., Vull agrair al Instituto de Tecnología Química per la concessió d’un contracte predoctoral, a la Red Española de Supercomputación (RES), al Centre de Càlcul de la Universitat de València, al Flemish Supercomputer Center (VSC) de la Ghent University pels recursos computacionals i el suport tècnic, a la Unió Europea i al Gobierno de España pel finançament d’aquest projecte a traves dels programes ERC-AdG-2014- 671093 (SynCatMatch) “Severo Ochoa” (SEV-2016-0683, MINECO) i dels projectes MAT2017-82288-C2-1-P i PID2020-112590GB-C21 (AEI/FEDER, UE), i al CSIC pel finançament de la estada al CMM a través del projecte i- Link (LINKA20381).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Growing modulator agents for the synthesis of Al-MOF-type materials based on assembled 1D structural sub-domains

  • Moreno, José María
  • Velty, Alexandra|||0000-0002-8263-4570
  • Vidal Moya, José Alejandro
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Novel aluminium MOF-type materials structured by 1D subdomains, such as organic-inorganic nanoribbons, were synthesized by modifying the conditions of solvothermal synthesis and the nature of the solvents in the presence of aryl monocarboxylate linkers with long alkyl chains, which acted as growth-modulating agents. Specifically, three different families of materials were prepared with various morphological characteristics: (i) isoreticular MIL-53(Al)-type materials, (ii) mesoscopic metalorganic structures and (iii) lamellar aluminium MOFs. The length of the alkyl chain in the aryl linker and the hydrophobic/hydrophilic nature of the solvothermal synthesis media determined the structuration level that was achieved. The derived Al-MOFs are active and stable catalysts for the synthesis of fine chemicals. This was illustrated by the efficient synthesis of 2,3-dihydro-2,2,4-trimethyl-1H-1,5-benzodiazepine., The authors are grateful for financial support from the Spanish Government under MAT2014-52085-C2-1-P, MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. J. M. M. thanks predoctoral fellowships from MINECO for economic support. The European Union is also acknowledged for ERC-AdG-2014-671093-SynCatMatch
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis and Structure of a 22 x 12 x 12 Extra-Large Pore Zeolite ITQ-56 Determined by 3D Electron Diffraction

  • Kapaca, Elina
  • Jiang, Jiuxing
  • Cho, Jung
  • Zou, Xiaodong
  • Willhammar, Tom
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Díaz Cabañas, Mª José
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] A multidimensional extra-large pore germanosilicate, denoted ITQ-56, has been synthesized by using modified memantine as an organic structure-directing agent. ITQ-56 crystallizes as plate-like nanocrystals. Its structure was determined by 3D electron diffraction/MicroED. The structure of ITQ-56 contains extra-large 22-ring channels intersecting with straight 12-ring channels. ITQ-56 is the first zeolite with 22-ring pores, which is a result of ordered vacancies of double 4-ring (d4r) units in a fully connected zeolite framework. The framework density is as low as 12.4 T atoms/1000 angstrom(3). The discovery of the ITQ-56 structure not only fills the missing member of extra-large pore zeolite with 22-ring channels but also creates a new approach of making extra-large pore zeolites by introducing ordered vacancies in zeolite frameworks., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), by the Spanish Government-MINECO through "Severo Ochoa" (SEV-2016-0683), the Swedish Research Council (VR, 2017-04321, 201905465), and the Knut & Alice Wallenberg Foundation through the project grant 3DEM-NATUR (KAW, 2012-0112). The EM facility was supported by the Knut and Alice Wallenberg Foundation. J.J. thanks the National Natural Science Foundation 21971259.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

&quot, Ab initio&quot, synthesis of zeolites for preestablished catalytic reactions

  • Gallego-Sánchez, Eva María
  • Portilla Ovejero, Mª Teresa
  • Leon Escamilla, Efigenio Alejandro
  • Paris, Cecilia|||0000-0002-5673-8114
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Unlike homogeneous catalysts that are often designed for particular reactions, zeolites are heterogeneous catalysts that are explored and optimized in a heuristic fashion. We present a methodol. for synthesizing active and selective zeolites by using org. structure-¿directing agents that mimic the transition state (TS) of preestablished reactions to be catalyzed. In these zeolites, the pores and cavities could be generated approaching a mol.-¿recognition pattern. For disproportionation of toluene and isomerization of ethylbenzene into xylenes, the TSs are larger than the reaction products. Zeolite ITQ-¿27 showed high disproportionation activity, and ITQ-¿64 showed high selectivity for the desired para and ortho isomers. For the case of a product and TS of similar size, we synthesized a catalyst, MIT-¿1, for the isomerization of endo-¿dicyclopentane into adamantane., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the "Severo Ochoa Program" (grant SEV 2012-0267). The Electron Microscopy Service of the Universitat Politecnica de Valencia (UPV) is acknowledged for help with sample characterization. The Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are gratefully acknowledged for computational facilities and technical assistance. E.M.G. acknowledges "La Caixa-Severo Ochoa" International Ph.D. Fellowship (call 2015). We thank I. Millet for technical assistance and V. J. Margarit and A. Cantin for helpful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Nanosized MCM-22 zeolite using simple non-surfactant organic growth modifiers: synthesis and catalytic applications

  • Gallego-Sánchez, Eva María
  • Paris, Cecilia|||0000-0002-5673-8114
  • Martínez, Cristina|||0000-0002-4415-084X
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Non surfactant cyclic alkylammonium can selectively decrease the rate of crystal growth along the x-y crystal axes during the synthesis of MWW zeolite. This results in an similar to 60 nm nanocrystalline zeolite that shows remarkable catalytic properties for the production of cumene., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), by the Spanish Government-MINECO through Severo Ochoa (SEV 2016-0683), MAT2015-71261-R and CTQ2015-70126-R, and by the Fundación Ramón Areces through a research contract of the Life and Materials Science program. The Electron Microscopy Service of the Universitat Politècnica de València (UPV) is acknowledged for their help in sample characterization. E. M. G. acknowledges La Caixa Severo Ochoa International PhD Fellowships (call 2015). We acknowledge V. J. Margarit for helpful discussions and B. Esparcia for technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Crude oil to chemicals: light olefins from crude oil

  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Sauvanaud, Laurent L.A.|||0000-0002-0274-2740
  • Corresa Mateu, Elena
  • Mathieu ., Yannick
  • Al-bogami, Saad
  • Al-Ghrami, Musaed
  • Bourane, Abdennour
[EN] The possibility to fulfill the increasing market demand and producers' needs in processing crude oil, a cheap and universally available feedstock, to produce petrochemicals appears to be a very attractive strategy. Indeed, many petrochemicals are produced as side streams during crude oil refining, which primary goal remains transportation fuel production. Availability of some critical feedstocks may then depend on local refining policy. In order to improve flexibility, it has been proposed to directly crack crude oil to produce petrochemicals, in particular light olefins (ethylene, propylene, butenes), using technologies derived from fluid catalytic cracking. This paper attempts to review the main research works done on the topic in the literature in the last five decades, focussing on process as well as catalyst technology, with a special interest for fluid catalytic cracking (FCC) based technology that can be used towards maximizing chemicals from crude oil. Factors investigated include use of severe cracking conditions, on-purpose additives (from ZSM5 to more exotic, metal doped additives), recycle streams and multiple riser systems., The authors thank Saudi Aramco for material and financial support. Financial support by the Spanish Government-MINECO through program "Severo Ochoa" (SEV 2012-0267), Consolider Ingenio (2010-Multicat, CSD-2009-0050), MAT2012-31657, CTQ2015-70126-R (MINECO/FEDER), by the European Union through ERC-AdG-2014-671093-SynCatMatch and by the Generalitat Valenciana through the Prometeo program (PROMETEOII/2013/011) is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High-silica nanocrystalline Beta zeolites: efficient synthesis and catalytic application

  • Martínez Franco, Raquel
  • Martínez Armero, Marta Evelia
  • Paris, Cecilia|||0000-0002-5673-8114
  • Martínez, Cristina|||0000-0002-4415-084X
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] An efficient synthesis methodology to obtain homogeneous nanosized high-silica Beta zeolites ( 10¿20 nm) with high solid yields (above 95%) using simple alkyl-substituted flexible dicationic OSDAs is described. These dicationic OSDAs allow the synthesis of nanosized Beta zeolites with different Si/Al ratios (15¿30) in alkaline and fluoride media, resulting in nanocrystalline materials with different physicochemical properties. These nanosized Beta zeolites show better catalytic behavior towards the industrially-relevant alkylation of benzene with propylene to obtain cumene compared with other commercially available nanosized Beta zeolites., Financial support from the Spanish Government-MINECO through “Severo Ochoa” (SEV 2012-0267), Consolider Ingenio 2010-Multicat, MAT2012-37160 and, MAT2012-31657 is acknowledged. The European Union is also acknowledged by the SynCatMatch project (ERC-AdG-2014-671093). M.E.M-A. thanks MINECO for economical support through a pre-doctoral fellowship (BES-2013-066800).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Confining isolated atoms and clusters in crystalline porous materials for catalysis

  • Liu, Lichen
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Structure-reactivity relationships for nanoparticle-based catalysts have been greatly influenced by the study of catalytic materials with either supported isolated metal atoms or metal clusters comprising a few atoms. The stability of these metal species is a key challenge because they can sinter into large nanoparticles under harsh reaction conditions. However, stability can be achieved by confining the nanoparticles in crystalline porous materials (such as zeolites and metal-organic frameworks). More importantly, the interaction between the metal species and the porous framework may modulate the geometric and electronic structures of the subnanometric metal species, especially for metal clusters. This confinement effect can induce shape-selective catalysis or different chemoselectivity from that of metal atoms supported on open-structure solid carriers. In this Review, we discuss the structural features, synthesis methodologies, characterization techniques and catalytic applications of subnanometric species confined in zeolites and metal-organic frameworks. We make a critical comparison between confined and non-confined isolated atoms and metal clusters, and provide future perspectives for the field., We are grateful for financial support from the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish Government through the Severo Ochoa Program (SEV-2016-0683).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Iron-Containing SSZ-39 (AEI) Zeolite: An Active and Stable High-Temperature NH3-SCR Catalyst

  • Martín-García, Nuria
  • VENNESTROM, PETER NICOLAI RAVNBORG
  • THOGERSEN, JOAKIM REIMER
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The preparation of the iron-containing SSZ-39 zeolite is described for the first time through two different synthesis methods: post-synthetic cation exchange and one-pot synthesis. The nature and stability of the iron species within the different Fe-SSZ-39 materials have been studied through different characterization techniques, and their catalytic activity has been evaluated for the selective catalytic reduction (SCR) of NOx with ammonia. The directly synthetized Fe-SSZ-39 performs better for the SCR of NOx with ammonia than other related Fezeolites, particularly at elevated reaction temperatures (above 450 degrees C), and presents improved hydrothermal stability when aged under severe conditions., This work has been supported by Haldor-Topsoe, by the Spanish Government-MINECO through the Severo Ochoa (SEV 2012-0267), and MAT2015-71261-R programs, by the European Union through ERC-AdF-2014-671093 (SynCatMatch); and by the Fundacion Ramon Areces. N.M. thanks MINECO for economical support through a pre-doctoral fellowship (BES-2013-064347). The authors thank Isabel Millet for technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

What Is Measured When Measuring Acidity in Zeolites with Probe Molecules?

  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Based on theoretical calculations of CO, NH3, and pyridine adsorption at different sites in MOR and MFI zeolites, we analyze how confinement effects influence the measurement of acidity based on the interaction of probe molecules with Brönsted acid sites. Weak bases, such as CO, form neutral ZH¿CO adducts with a linear configuration that can be distorted by spatial restrictions associated with the dimensions of the pore, leading to weaker interaction, but can also be stabilized by dispersion forces if a tighter fitting with the channel void is allowed. Strong bases such as NH3 and pyridine are readily protonated on Brönsted acid sites, and the experimentally determined adsorption enthalpies include not only the thermochemistry associated with the proton transfer process itself, but also the stabilization of the Z¿¿BH+ ion pair formed upon protonation by multiple interactions with the surrounding framework oxygen atoms, leading in some cases to a heterogeneity of acidities within the same zeolite structure., This work was supported by the European Union through No. ERC-AdG-2014-671093 (SynCatMatch), and by the Spanish Government-MINECO through "Severo Ochoa" (No. SEV-2016-0683) and No. MAT2017-82288-C2-1-P projects. Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are gratefully acknowledged for computational resources.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Cationic Oligomer as an Organic Template for Direct Synthesis of Aluminosilicate ITH Zeolite

  • Lei, Chi
  • Dong, Zhuoya
  • Chen, Wei
  • Wu, Qinming
  • Meng, Xiangju
  • Parvulescu, Andrei-Nicolae
  • De Baerdemaeker, Trees
  • Mueller, Ulrich
  • Zheng, Anmin
  • Ma, Yanhang
  • Zhang, Weiping
  • Yokoi, Toshiyuki
  • Marler, Bernd
  • Martínez, Cristina|||0000-0002-4415-084X
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] There are a large number of zeolites, such as ITH, that cannot be prepared in the aluminosilicate form. Now, the successful synthesis of aluminosilicate ITH zeolite using a simple cationic oligomer as an organic template is presented. Key to the success is that the cationic oligomer has a strong complexation ability with aluminum species combined with a structural directing ability for the ITH structure similar to that of the conventional organic template. The aluminosilicate ITH zeolite has very high crystallinity, nanosheet-like crystal morphology, large surface area, fully four-coordinated Al species, and abundant acidic sites. Methanol-to-propylene (MTP) tests reveal that the Al-ITH zeolite shows much higher selectivity for propylene and longer lifetime than commercial ZSM-5. FCC tests show that Al-ITH zeolite is a good candidate as a shape-selective FCC additive for enhancing propylene and butylene selectivity., This work is supported by National Key Research and Development Program of China (2017YFB0702803), National Natural Science Foundation of China (21703203, 21673205, 21835002 and 21875140), Shanghai Pujiang Program (17PJ1406400), and the Young Elite Scientist Sponsorship Program by CAST (2017QNRC001). This work is partially supported by CEM, SPST, ShanghaiTech (Grant 02161943), the Spanish Government-MICINN through "Severo Ochoa" (SEV 2012-0267) and RTI2018-101033-B-I00, and the European Union through ERC-AdG-2014-671093 (SynCatMatch). This work was also supported by INCOE program of BASF SE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of nano-SSZ-13 and its application in the reaction of methanol to olefins

  • Li, Zhibin
  • Yu, Jihong
  • Navarro Villalba, Mª Teresa|||0000-0001-5012-8414
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Nanosized SSZ-13 has been obtained from a one-pot synthesis procedure with the addition of CTAB to the synthesis precursor solution. Nano-SSZ-13 zeolite showed high intracrystalline mesoporosity and compared to standard SSZ-13 presented a much longer lifetime and higher conversion capacity for the reaction of methanol to olefins. The improved properties were attributed to a more efficient utilization of micropores by easier diffusion of reactants and products and slower deactivation by coke. A higher C2/C3 ratio was found for nano-SSZ-13, pointing to a lower deactivation of the aromatics cycle of the hydrocarbon pool., Financial support by the Spanish Government-MINECO through “Severo Ochoa” (SEV 2012-0267), CTQ2015-67592-P, CTQ2015-70126-R, CTQ2015-68951-C3-1-R, MAT2015-71842-P, by the European Union ERC-AdG-2014-671093-SynCatMatch and by the Generalitat Valenciana PROMETEOII/2013/011 is acknowledged. Z. Li acknowledges China Scholarship Council (CSC) for a fellowship. J. Yu thanks the Major International Joint Research Project of China for financial support (Grant No. 21320102001).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of 2D and 3D MOFs with tuneable Lewis acidity from preformed 1D hybrid sub-domains

  • Moreno-Rodríguez, José María
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Novel MOF-type materials with different morphologies based on assembled 1D organic-inorganic subdomains were prepared using specific monodentate benzylcarboxylate spacers with functional substituents in the para-position as structure modulating agents. The combination of electronwithdrawing or electron-donating functions in the organic spacers with suitable solvothermal synthesis conditions allowed modulating the structuration level (2D or 3D), vacancies, physico-chemical properties and Lewis acidity strength of the metal-organic structures. Furthermore, bimetallic (Al/ Fe) MOF-type materials were synthesized by a one-pot direct process without modification of the structural framework. The activity of these hybrid materials as Lewis acid catalysts was evaluated to prepare cyanohydrins as precursors for the synthesis of biologically active compounds, and for aerobic oxidation of thiols to disulfides. The catalytic results showed that the derived MOFs exhibited modulatable Lewis acid capacities which are a function of the morphology, functionality of monodentate substituents present in the networks and a cooperative effect between metallic nodes of different nature., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P, MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. J. M. M. acknowledges Predoctoral Fellowships from MINECO for economical support. The authors thank the MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Functional Acid and Base Hybrid Catalysts Organized by Associated (Organo)aluminosilicate Layers for C-C Bond Forming Reactions and Tandem Processes

  • Gaona Cordero, Aide
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Novel bifunctional acid base monolayered hybrid catalysts (MLHMs), based on associated individual (organo)aluminosilicate sheets with amino and sulfonic pending groups located in the interlayer space, have been successfully prepared by direct alkaline hydrothermal synthesis and evaluated in consecutive catalytic transformations. Different characterization techniques such as chemical and thermogravimetrical analyses, X-ray diffraction, TEM microscopy, nuclear magnetic resonance (NMR), temperature programmed desorption of CO2 and NH3 (TPD), and textural measurements were used to show the physicochemical and structural nature of the materials, evidencing their effectiveness as functional acid, base, and acid base catalysts for different one pot two-step tandem reactions, which were performed in the presence of only one active and recoverable lamellar-type hybrid solid catalyst., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P and Severo Ochoa Excellence Program SEV-2012-0267. A.G. thanks predoctoral fellowships from MINECO for economical support (reference number BES-2012-052429). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Crucial Role of Cluster Morphology on the Epoxidation of Propene Catalyzed by Cu-5: A DFT Study

  • Fernández Villanueva, Estefanía
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The selective oxidation of propene to propene oxide (PO) is an industrially relevant and still challenging reaction that requires the design of highly specific catalysts able to improve simultaneously activity and selectivity. Metallic copper exhibits high selectivity toward propene epoxidation that drops when the catalyst surface is oxidized under reaction conditions. On the basis of previous work showing that small planar Cu-5 clusters are more resistant to oxidation than 3D ones, we have performed a detailed theoretical study of the mechanism of propene oxidation with molecular O-2 and atomic O adsorbed on both planar and 3D Cu-5 clusters. The desired pathways leading to PO as well as the undesired routes producing propanal, acetone, or allyl intermediates that finally evolve to acrolein or CO2 have been considered, and the global analysis of all data indicates that planar Cu-5 clusters are promising candidates for the selective epoxidation of propene, This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Spanish Government through "Severo Ochoa"(SEV-2016-0683, MINECO) and MAT2017-82288-C2-1-P (AEI/FEDER, UE) Projects. E.F.V. thanks Spanish MINECO for her fellowship SVP-2013-068146.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Low-Temperature Catalytic NO Reduction with CO by Subnanometric Pt Clusters

  • Fernández-Villanueva, Estefanía
  • Liu, Lichen
  • Arenal, Raul
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The catalytic subnanometric metal clusters with a few atoms can be regarded as an intermediate state between single atoms and metal nanoparticles (>1 nm). Their molecule-like electronic structures and flexible geometric structures bring rich chemistry and also a different catalytic behavior, in comparison with the single-atom or nanoparticulate counterparts. In this work, by combination of operando IR spectroscopy techniques and electronic structure calculations, we will show a comparative study on Pt catalysts for CO + NO reaction at a very low temperature range (140-200 K). It has been found that single Pt atoms immobilized on MCM-22 zeolite are not stable under reaction conditions and agglomerate into Pt nanoclusters and particles, which are the working active sites for CO + NO reaction. In the case of the catalyst containing Pt nanoparticles (similar to 2 nm), the oxidation of CO to CO2 occurs in a much lower extension, and Pt nanoparticles become poisoned under reaction conditions because of a strong interaction with CO and NO. Therefore, only subnanometric Pt clusters allow NO dissociation at a low temperature and CO oxidation to occur well on the surface, while CO interaction is weak enough to avoid catalyst poisoning, resulting in a good balance to achieve enhanced catalytic performance., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014671093, SynCatMatch) and the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683) and MAT2017-82288-C2-1-P projects. L.L. thanks ITQ for providing a contract. E.F. thanks MINECO for her fellowship SVP-2013-068146. The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. The HRSTEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. RA. acknowledges support from Spanish MINECO grant MAT2016-79776-P (AEI/FEDER, UE), from the Government of Aragon and the European Social Fund (grant number E13_17R, FEDER, UE), and from the European Union H2020 program "ESTEEM3" (grant number 823717). Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are acknowledged for computational resources and technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modulating the catalytic behavior of non-noble metal nanoparticles by inter-particle interaction for chemoselective hydrogenation of nitroarenes into corresponding azoxy or azo compounds

  • Liu, Lichen
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Aromatic azoxy compounds have wide applications and they can be prepared by stoichiometric or catalytic reactions with H2O2 or N2H4 starting from anilines or nitroarenes. In this work, we will present the direct chemoselective hydrogenation of nitroarenes with H-2 to give aromatic azoxy compounds under base-free mild conditions, with a bifunctional catalytic system formed by Ni nanoparticles covered by a few layers of carbon (Ni@C NPs) and CeO2 nanoparticles. The catalytic performance of Ni@C-CeO2 catalyst surpasses the state-of-art Au/CeO2 catalyst for the direct production of azoxybenzene from nitrobenzene. By means of kinetic and spectroscopic results, a bifunctional mechanism is proposed in which, the hydrogenation of nitrobenzene can be stopped at the formation of azoxybenzene with >95% conversion and >93% selectivity, or can be further driven to the formation of azobenzene with >85% selectivity. By making a bifunctional catalyst with a non-noble metal, one can achieve chemoselective hydrogenation of nitroarenes not only to anilines, but also to corresponding azoxy and azo compounds. (C) 2018 The Authors. Published by Elsevier Inc. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)., This work has been supported by the European Union through the SynCatMatch project (ERC-AdG-2014-671093). Financial supports by the Spanish Government-MINECO through the program "Severo Ochoa" (SEV-2016-0683) are gratefully acknowledged. The authors also thank the Microscopy Service of UPV for kind help with TEM and STEM measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cage-based small-pore catalysts for NH3-SCR prepared by combining bulky organic structure directing agents with modified zeolites as reagents

  • Martín-García, Nuria
  • Vennestrom
  • Peter Nicolai Ravnborg
  • Thogersen, Joakim Reimer
  • Paris, Cecilia|||0000-0002-5673-8114
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Moliner Marin, Manuel|||0000-0002-5440-716X
[EN] It has been possible to efficiently synthesize high-silica ERI and AFX zeolites with nano-sized primary crystallites (30-200 nm). This was achieved by using a dicationic and rigid organic structure directing agent (OSDA) that fits within the large cavities of these zeolites, and the use of FAU zeolites as initial Si and Al-sources. Cu- and Fe-based ERI and AFX materials were prepared following both post-synthetic cation exchange and direct synthesis methodologies, showing good activity for the selective catalytic reduction (SCR) of nitrogen oxide using ammonia. Accelerated hydrothermal ageing of the zeolites at high temperature (i.e. 750 degrees C) shows the necessity of removing the alkali cations remaining in the zeolites to obtain stable materials. Furthermore, the catalytic performance of the prepared Cu- and Fe-containing AFX catalyst, both before and after ageing treatment, approaches the catalytic activity of Cu- and Fe-CHA. (C) 2017 Elsevier B.V. All rights reserved., This work has been supported by Haldor Topsoe A/S, by the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267), and MAT2015-71261-R, by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Fundacion Ramon Areces through a research contract of the "Life and Materials Science" program. N. M. thanks MINECO for economical support through pre-doctoral fellowship (BES-2013-064347). The authors thank Isabel Millet for technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of cocrystallized USY/ZSM-5 zeolites from kaolin and its use as fluid catalytic cracking catalysts

  • Ghrib, Y.
  • Frini-Srasra, N.
  • Srasra, E.
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] A series of samples of cocrystallized USY/ZSM-5 zeolites were synthesized from kaolin and silica following a sequential two-step procedure with varying content of ZSM-5 (5-25 wt%). The presence of the ZSM-5 phases was confirmed by XRD and Si-29-NMR. The samples were stabilized by steaming and tested as FCC catalysts in the cracking of vacuum gasoil. The results obtained show that effectiveness of ZSM-5 as a propylene booster is enhanced when zeolites USY and ZSM-5 were synthesized in the same kaolin material, instead of using merely the physical mixtures of the two zeolites. This enhancement is attributed to the higher ability of ZSM-5 to crack larger olefins and suppress hydrogen-transfer to the gasoline fraction when the zeolites are grown together., This work has been supported by the Spanish Government MINECO through "Severo Ochoa" SEV-2016-0683, CTQ2015-67592-P and CTQ2015-68951-C3-1-R, by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Fundacion Ramon Areces through a research contract of the "Life and Materials Science" program. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Regioselective Generation of Single-Site Iridium Atoms and Their Evolution into Stabilized Subnanometric Iridium Clusters in MWW Zeolite

  • Liu, Lichen
  • Lopez-Haro, Miguel
  • Meira, Debora M.
  • Calvino, Jose J.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Preparation of supported metal catalysts with uniform particle size and coordination environment is a challenging and important topic in materials chemistry and catalysis. In this work, we report the regioselective generation of single-site Ir atoms and their evolution into stabilized subnanometric Ir clusters in MWW zeolite, which are located at the 10MR window connecting the two neighboring 12MR supercages. The size of the subnanometric Ir clusters can be controlled by the post-synthesis treatments and maintain below 1 nm even after being reduced at 650 degrees C, which cannot be readily achieved with samples prepared by conventional impregnation methods. The high structure sensitivity, size-dependence, of catalytic performance in the alkane hydrogenolysis reaction of Ir clusters in the subnanometric regime is evidenced., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683). The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. High-resolution STEM measurements were performed at the DME-UCA node of the ELECMI National Singular Infrastruture, in Cadiz University, with financial support from FEDER/MINECO (MAT2017-87579-R and MAT2016-81118-P). This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, and was supported by the U.S. DOE under Contract No.DE-AC02-06CH11357, and the Canadian Light Source and its funding partners. The financial support from ExxonMobil on this project is also greatly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Conceptual similarities between zeolites and artificial enzymes

  • Gallego-Sánchez, Eva María
  • Paris, Cecilia|||0000-0002-5673-8114
  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] By using a Diels-Alder (DA) reaction as a base case, we show that a pure silica zeolite acting as an entropy-trapping scaffold can be synthesized with an organic structure directing agent (OSDA) analogue of the transition state (TS) of the DA reaction. A cavity stabilization of the TS is observed with the corresponding decrease in the activation energy of the reaction. A lower enthalpy of activation and a larger decrease in entropy are obtained with the zeolite synthesized with the analogue of the DA TS when compared with other zeolitic structures. Those differences are maintained, while catalytic activity is increased, when active sites are introduced in the zeolite. The catalytic zeolitic system synthesized with the OSDA analogue of the TS shows conceptual similarities with "de novo design" of an artificial enzyme to perform DA reactions, in where a suitable scaffold of existing proteins is chosen, and computationally designed active sites able to catalyze the cycloaddition reaction are introduced., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), by the Spanish Government-MINECO through "Severo Ochoa" (SEV-2016-0683) and RTI2018-101033, and by La Caixa Foundation through MITSPAIN SEED FUND (LCF/PR/MIT17/11820002). Eva M. Gallego acknowledges "La Caixa -Severo Ochoa" International PhD Fellowships (call 2015). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evolution of Isolated Atoms and Clusters in Catalysis

  • Liu, Lichen
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Structural transformation and evolution of active metal sites can occur in metal-catalyzed reactions in both homogeneous and heterogeneous systems. Such structural changes have an important impact on the catalytic behavior, including activity, selectivity, and stability. Aiming to establish a link between homogeneous and heterogeneous catalytic systems, this review begins with a discussion on dynamic structural transformations of metal catalysts in homogeneous reactions and the corresponding implications. We then discuss the evolution of isolated metal atoms and clusters in heterogeneous catalysts during catalyst activation and under reaction conditions. Finally, strategies for stabilizing subnanometric metal species on solid supports are presented for potential industrial applications, We are grateful for financial support from the EU through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the 'Severo Ochoa Program' (SEV-2016-0683)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A heterogeneous mechanism for the catalytic decomposition of hydroperoxides and oxidation of alkanes over CeO2 nanoparticles: A combined theoretical and experimental study

  • López Auséns, Javier Tirso
  • Chouzier, Sandra
  • Mastroianni, Sergio
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] A nanoparticulate CeO2 catalyst is presented that is able to oxidize cyclohexane to K/A-oil (a mixture of cyclohexanone and cyclohexanol) using hydroperoxides as oxidizing species. The improvement in selectivity with decreasing particle size suggests the existence of a structure-activity relationship in this process, and points to a preferential activation of cyclohexane at defective corner or edge sites. A detailed theoretical study of the reaction mechanism over three different CeO2 catalyst models shows that cyclohexane is preferentially activated by bicoordinated oxygen atoms present at the edges of small particles, following a Mars van Krevelen mechanism which has been confirmed by in situ IR spectroscopy and O-18/O-16 isotopic exchange experiments. The process is fully heterogeneous, and the catalyst can be reused without loss of activity up to four cycles., The authors thank Solvay, MINECO (Consolider Ingenio 2010-MULTICAT, CSD2009-00050 and Severo Ochoa program, SEV-2012-0267), Generalitat Valenciana (PROMETEOII/2013/011 Project) and the European Union (ERC-AdG-2014-671093 - SynCat-Match) for financial support. Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are gratefully acknowledged for computational facilities and technical assistance. The technical support of the Electronic Microscopy Service of UPV is kindly appreciated. T.L.-A. thanks ITQ for a contract. We are grateful to Special Chem and Fabien Ocampo for providing ceria materials, and to Konstantin Neyman for providing the Ce<INF>21</INF>O<INF>42</INF> and Ce<INF>40</INF>O<INF>80</INF> nanoparticle models.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Facile Synthesis of Surface-Clean Monodispersed CuOx Nanoparticles and Their Catalytic Properties for Oxidative Coupling of Alkynes

  • Liu, Lichen
  • Matsushita, Toshiyuki
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] We show a facile method to prepare surface-clean monodispersed small and stable CuOx nanoparticles with controllable average sizes from below 1 nm up to similar to 5 nm without using bulk capping agent. Structural and surface characterizations show that the chemical states of CuOx nanoparticles and their interactions with O-2 are dependent on the particle size. To show their relevance to catalysis, the well-defined monodispersed CuOx nanoparticles have been used for oxidative coupling of alkynes. While the generally used CuCl catalysts presents a reaction induction period and agglomerate into CuOx nanoparticles during the reaction, the induction period disappears when monodispersed CuOx nanoparticles (similar to 2 nm) were used as catalyst. Supported CuOx nanoparticles on TiO2 behave in the same way as monodispersed CuOx nanoparticles. Kinetic, spectroscopic, and isotopic studies show that O-2 activation is the rate-controlling step and that the nature of the oxygen species formed on supported CuOx nanoparticles is dependent on the size of CuOx and determine the catalytic properties for oxidative coupling of alkynes., L.L. thanks ITQ for providing a contract. The authors also thank the Microscopy Service of UPV for kind help on TEM and STEM measurements. Financial supports from Consolider-Ingenio 2010 (project MULTICAT) and "Severo Ochoa" program are also gratefully acknowledged. The European Union is also acknowledged by ERC-AdG-2014-671093 - SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Titanosilicate zeolite precursors for highly efficient oxidation reactions

  • Bai, Risheng
  • Song, Yue
  • Zhang, Tianjun
  • Zou, Yongcun
  • Feng, Zhaochi
  • Zhang, Peng
  • Yu, Jihong
  • Navarro Villalba, Mª Teresa|||0000-0001-5012-8414
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Titanosilicate zeolites are catalysts of interest in the field of fine chemicals. However, the generation and accessibility of active sites in titanosilicate materials for catalyzing reactions with large molecules is still a challenge. Herein, we prepared titanosilicate zeolite precursors with open zeolitic structures, tunable pore sizes, and controllable Si/Ti ratios through a hydrothermal crystallization strategy by using quaternary ammonium templates. A series of quaternary ammonium ions are discovered as effective organic templates. The prepared amorphous titanosilicate zeolites with some zeolite framework structural order have extra-large micropores and abundant octahedrally coordinated isolated Ti species, which lead to a superior catalytic performance in the oxidative desulfurization of dibenzothiophene (DBT) and epoxidation of cyclohexene. It is anticipated that the amorphous prezeolitic titanosilicates will benefit the catalytic conversion of bulky molecules in a wide range of reaction processes., The authors thank the National Key Research and Development Program of China (Grant 2016YFB0701100), the National Natural Science Foundation of China (Grant 21621001, 21920102005 and 21835002), the 111 Project (B17020), the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch), and the Spanish Government through "Severo Ochoa" (SEV-2016-0683, MINECO) for supporting this work. The APS was operated for the U.S. DOE Office of Science by the Argonne National Laboratory, and the CLS@APS facilities (Sector 20) were supported by the U.S. DOE under contract no. DEAC02-06CH11357, and the Canadian Light Source and its funding partners. R. Bai acknowledges the China Scholarship Council for the financial support. Jose Gaona Miguelez is also acknowledged for technical help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Light-Promoted Hydrogenation of Carbon Dioxide¿An Overview

  • Puga Vaca, Alberto
[EN] Hydrogenation of carbon dioxide is considered as a viable strategy to generate fuels while closing the carbon cycle (heavily disrupted by the abuse in the exploitation of fossil resources) and reducing greenhouse gas emissions. The process can be performed by heat-powered catalytic processes, albeit conversion and selectivity tend to be reduced at increasing temperatures owing to thermodynamic constraints. Recent investigations, as summarised in this overview, have proven that light activation is a distinct possibility for the promotion of CO2 hydrogenation to fuels. This effect is particularly beneficial in methanation processes, which can be enhanced under simulated solar irradiation using materials based on metallic nanoparticles as catalysts. The use of nickel, ruthenium and rhodium has led to substantial efficiencies. Light-promoted processes entail performances on a par with (or even superior to) those of thermally-induced, industrially-relevant, commercial technologies., The author thanks the Spanish Government (Ministerio de Economía y Competitividad, MINECO) for financial support via a project for young researchers (CTQ2015-74138-JIN), and the ‘‘Severo Ochoa’’ programme (SEV 2012-0267). The European Union is also acknowledged for the SynCatMatch project (ERCAdG-2014-671093)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Zeolite-Assisted Lignin-First Fractionation of Lignocellulose: Overcoming Lignin Recondensation through Shape-Selective Catalysis

  • Subbotina, Elena
  • Samec, Joseph S. M.
  • Velty, Alexandra|||0000-0002-8263-4570
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Organosolv pulping releases reactive monomers from both lignin and hemicellulose by the cleavage of weak C-O bonds. These monomers recombine to form undesired polymers through the formation of recalcitrant C-C bonds. Different strategies have been developed to prevent this process by stabilizing the reactive monomers (i.e., lignin-first approaches). To date, all reported approaches rely on the addition of capping agents or metal-catalyzed stabilization reactions, which usually require high pressures of hydrogen gas. Herein, a metal- and additive-free approach is reported that uses zeolites as acid catalysts to convert the reactive monomers into more stable derivatives under organosolv pulping conditions. Experiments with model lignin compounds showed that the recondensation of aldehydes and allylic alcohols produced by the cleavage of beta-O-4 ' bonds was efficiently inhibited by the use of protonic beta zeolite. By applying a zeolite with a preferred pore size, the bimolecular reactions of reactive monomers were effectively inhibited, resulting in stable and valuable monophenolics. The developed methodology was further extended to birch wood to yield monophenolic compounds and value-added products from carbohydrates., This work was supported by the Swedish Energy Agency, Stiftelsen Olle Engkvist Byggm~stare, and the European Union through ERC-AdG-2014-671093-SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Trapping of Metal Atoms and Metal Clusters by Chabazite under Severe Redox Stress

  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Serna Merino, Pedro Manuel
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Gabay, J. E.
  • Kliewer, C. E.
[EN] The remarkable ability of Al-containing CHA zeolite to trap and stabilize noble single-metal atoms and metal clusters has facilitated the design of sinter-resistant materials for catalytic applications that require severe reaction conditions. At high temperatures in O-2, volatile MOx species appear to be fixated by the zeolite Al centers to prevent Ostwald-ripening sintering mechanisms, whereas small metal clusters (<100 atoms) are stabilized in H-2 without further aggregation as coalescence by Brownian motion is inhibited because of an encapsulation effect. Evidences of the possibility to trap the metal released from a second adjacent surface (e.g., SiO2 and Al2O3), upon metal migration over micrometer distances, are provided. These properties have opened the possibility to prepare several noble-metal atoms and clusters inside small-pore zeolites, including bimetallic formulation, by simple wetness impregnations or solid-to-solid transformations followed by standard calcination procedures, resulting in improved catalytic performances compared to other nonreducible supports in reactions that subject the catalysts to severe redox stress, such as the water-gas-shift reaction., This work has been supported by the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267) and MAT2015-71261-R, by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Fundacion Ramon Areces through a research contract of the "Life and Materials Science" program. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. This research used beamline 9-BM and 20-ID of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. We thank Isabel Millet, Elisa Garcia, and Paul Stevens for technical assistance, and Aaron Sattler, Randall Meyer, Rob Carr, and Gary Casty for review of the manuscript and interesting scientific discussions. We appreciate the support of ExxonMobil Research and Engineering in this fundamental research area.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dynamic Structure and Subsurface Oxygen Formation of a Working Copper Catalyst under Methanol Steam Reforming Conditions: An in Situ Time-Resolved Spectroscopic Study

  • Ruano-Sánchez, Daniel
  • Cored-Bandrés, Jorge
  • Azenha, C.
  • Pérez-Dieste, Virginia
  • Mendes, A.
  • Mateos-Pedrero, C.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] The dynamic behavior of a CuO/ZnO/Ga2O3 catalyst under methanol steam reforming (MSR) reaction conditions promoted by a high dispersion of the copper nanoparticles and defect sites of a nonstoichiometric ZnGa2O4 spinel phase has been observed, where structural changes taking place in the initial state of the reaction determine the final state of the catalyst in stationary reaction conditions. Mass spectrometry (MS) studies under transient conditions coupled to X-ray photoelectron spectroscopy (XPS) have shown copper oxidation to Cu+ in the initial state of the reaction (TOS = 4 min), followed by a fast reduction of the outer shell to Cu-0, while keeping dissolved oxygen species in the inner layers of the nanoparticle. The presence of this subsurface oxygen impairs a positive charge to the uppermost surface copper species, that is, Cu delta+, which undoubtedly plays an important role on the MSR catalytic activity. The detection of these features, unperceived by conventional spectroscopic and catalytic studies, has only been possible by combining synchrotron NAP-XPS studies with transient studies performed in a low volume catalytic reactor connected to MS and linked with Raman and laboratory scale XPS studies., The research leading to these results has received funding from the European Union's Seventh Framework Programme (FP/2007-2013) for the Fuel Cells and Hydrogen Joint Technology Initiative under Grant Agreement No. [303476]. Part of this work was financially supported by the following projects: (i) Project POCI-01-0145-FEDER-006939 (Laboratory for Process Engineering, Environment, Biotechnology and Energy UID/EQU/00511/2013) funded by the European Regional Development Fund (ERDF), through COMPETE2020 - Programa Operacional Competitividade e Internacionalizacao (POCI) and by national funds, through FCT - Fundacao para a Ciencia e a Tecnologia; (ii) NORTE-01-0145-FEDER-000005 - LEPABE-2-ECO-INNOVATION, supported by North Portugal Regional Operational Programme (NORTE 2020), under the Portugal 2020 Partnership Agreement, through the European Regional Development Fund (ERDF); and (iii) the Spanish Government-MINECO through "Severo Ochoa" Excellence Programme (SEV-2016-0683). D.R. thanks European Research Council project SYNCATMATCH (671093). J.C. thanks the Spanish Government (MINECO) for a "Severo Ochoa" grant (BES-2015-075748). The NAP-XPS experiments were performed at the NAPP branch of the CIRCE beamline at the ALBA Synchrotron with the collaboration of ALBA staff.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Combined theoretical and spectroscopic mechanistic studies for improving activity and selectivity in heterogeneous catalysis

  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] By combining theoretical modelling, in situ spectroscopy and kinetic studies it is possible to understand, at the molecular level, the role that the different types of active centres co-existing on real heterogeneous catalysts play on each elementary step of the global reaction mechanism. The fundamental knowledge acquired by means of this multi-disciplinary approach in two selected reactions, the chemoselective hydrogenation of substituted nitroaromatics and the Sonogashira coupling between aryl halides and alkynes, is applied to direct the rational synthesis of more efficient industrial catalysts based on noble metal particles supported on metal oxides. (C) 2016 Elsevier B.V. All rights reserved., The authors thankMINECO (Consolider Ingenio 2010-MULTICAT CSD2009-00050 and Severo Ochoa program SEV-2012-0267), Generalitat Valenciana (PROMETEOII/2013/011 Project) and European Union (ERC-AdG-2014-671093 — SynCatMatch) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Single-Layered Hybrid Materials Based on 1D Associated Metalorganic Nanoribbons for Controlled Release of Pheromones

  • Moreno Rodríguez, José María
  • Navarro Fuertes, Ismael
  • Díaz, Urbano|||0000-0003-1472-8724
  • Primo Millo, Jaime|||0000-0003-2254-8184
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] A new family of stable layered organic-inorganic materials has been prepared, in one-step solvothermal process. They are based on an ordered nickel cluster-type nanoribbons separated from each other by specific alkyl (heptyl- or dodecyl-) arylic mono-carboxylate moieties acting as molecular spacers, perpendicular to the 1D inorganic chains. These organic spacers contain hydrocarbon tails with different length which control the separation level between inorganic 1D sub-units, inhibiting the 3D growth of conventional DUT-8-type metal-organic frameworks (MOFs). The lamellar nature of the materials formed was studied and confirmed by different characterization techniques, showing the structural location of individual organic and inorganic building units. They have been successfully used as a long-lasting biodegradable and water-proof materials for controlled release of chemicals, such as pheromones for sustainable treatment of insect plagues., The support of the European Union (ERC-AdG-2014-671093—SynCatMatch) and the Spanish Government (MAT2014-52085-C2-1-P and Severo Ochoa program SEV2012-0267) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modeling of EPR Parameters for Cu(II): Application to the Selective Reduction of NOx Catalyzed by Cu-Zeolites

  • Fernández-Villanueva, Estefanía
  • Moreno González, Marta
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] We present a combined theoretical-experimental study aiming to provide information about the location and coordination environment of the Cu2+ species involved in the selective reduction of NOx with NH3 catalyzed by Cu-zeolites. From the experimental side, we show and discuss the EPR spectra of the three molecular sieves most widely used as catalysts for the NH3-SCR-NOx reaction, namely Cu-SSZ-13, Cu-SAPO-34 and Cu-ZSM-5 both in their hydrated state and after dehydration. Then, we investigate the EPR spectra of Cu-SSZ-13 and Cu-SAPO-34 under the following conditions: (i) after NH3 adsorption, (ii) after NO addition, and (iii) in the presence of a NO/O-2 mixture. As regards the theoretical part, an exhaustive computational study has been performed that includes geometry optimization and calculation of the EPR parameters of all the relevant systems involved in the NH3-SCR-NOx reaction. The influence of local geometry and Al/Si distribution in the zeolite framework on the EPR parameters and the most probable location of Cu2+ in each material are analyzed, and assignations of the EPR signals obtained under different reaction conditions are discussed., This work has been supported by the Spanish Government through Severo Ochoa Program (SEV 2012-0267), MAT2015-71261-R and CTQ2015-68951-C3-1-R, and by the European Union through ERC-AdG-2014-671093 (SynCatMatch). Red Española de Supercomputación (RES) and Centre de Càlcul de la Universitat de Valencia are gratefully acknowledged for computational resources and technical support. E.F.V. thanks MINECO for her fellowship SVP-2013-068146.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Heterogeneous Catalysis: Understanding for Designing, and Designing for Applications

  • Corma Canós, Avelino|||0000-0002-2232-3527
Despite the introduction of high-throughput and combinatorial methods that certainly can be useful in the process of catalysts optimization, it is recognized that the generation of fundamental knowledge at the molecular level is key for the development of new concepts and for reaching the final objective of solid catalysts by design …
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chemical and Structural Parameter Connecting Cavity Architecture, Confined Hydrocarbon Pool Species, and MTO Product Selectivity in Small-Pore Cage-Based Zeolites

  • Ferri-Vicedo, Pau
  • Li, Chengeng
  • Paris, Cecilia|||0000-0002-5673-8114
  • Vidal Moya, José Alejandro
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The catalysts used in the methanol-to-olefins (MTO) reaction are considered dual systems comprising an inorganic zeolite framework and organic compounds hosted inside that act as cocatalysts. The influence of zeolite cavity architecture on the preferential stabilization of cationic intermediates involved in the paring and side-chain routes of the hydrocarbon pool mechanism is analyzed by means of density functional theory (DFT) calculations, catalyst testing, and C-13 NMR spectroscopy for some small-pore cage-based zeolites. A correlation between the degree of methylation of the entrapped methylbenzenium (MB+) cations and the selectivity to ethene and propene is found experimentally and explained in terms of the electronic distribution of the first intermediate of the paring route. A deep understanding of the reaction mechanism and of the specific host guest interactions taking place inside zeolite catalysts allows establishing a quantitative parameter that is indicative for the contribution of the paring route and therefore the C-3(=)/C-2(=) ratio in the MTO reaction., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), Spanish Government through "Severo Ochoa" (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE), and RTI2018-101033-B-100 (MCIU/AEI/FEDER, UE), and by the Fundacion Ramon Areces through a research contract (CIVP18A3908). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Espanola de Supercomputacion (RES) and Servei d'Informatica de la Universitat de Valencia are acknowledged for computational resources and technical support. C.L. acknowledges the China Scholarship Council (CSC) for a Ph.D. fellowship. P.F. thanks ITQ for acontract. The authors thank Prof. Fernando Rey and Dr. Joaquin Martinez for helpful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Accelerated crystallization of zeolites via hydroxyl free radicals

  • Feng, G.
  • Cheng, P
  • Yan, W.
  • Li, X
  • Su, J.
  • Wang, J.
  • Li, Y.
  • Xu, R
  • Yu, J.
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] In the hydrothermal crystallization of zeolites from basic media, hydroxide ions (OH-) catalyze the depolymerization of the aluminosilicate gel by breaking the Si, Al-O-Si, Al bonds and catalyze the polymerization of the aluminosilicate anions around the hydrated cation species by remaking the Si, Al-O-Si, Al bonds. We report that hydroxyl free radicals (center dot OH) are involved in the zeolite crystallization under hydrothermal conditions. The crystallization processes of zeolites-such as Na-A, Na-X, NaZ-21, and silicalite-1-can be accelerated with hydroxyl free radicals generated by ultraviolet irradiation or Fenton's reagent., This work was supported by the 973 Project (grants 2014CB931802 and 2013CB921802) and the National Natural Science Foundation of China (grants 21320102001, 91122029, and 21571075). A.C. thanks the Program Severo Ochoa for financial support and ERC-AdG-2014-671093-SynCatMatch. J.Y. designed and supervised the project; W.Y., A.C., and R.X. involved the design of the experiments; G.F., P.C., and J.W. performed the experiments; J.-H.S. performed the EPR analyses; M.B., X.L., and Y.L. contributed to the calculations; J.Y. and W.Y. analyzed the data; G.F. wrote the first draft; and J.Y. and W.Y. deeply revised the manuscript. A Chinese patent about the method for UV-assisted synthesis of zeolite materials has been applied for.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Atomic-level understanding on the evolution behavior of subnanometric Pt and Sn species during high-temperature treatments for generation of dense PtSn clusters in zeolites

  • Liu, Lichen
  • Lopez-Haro, Miguel
  • Wittee Lopes, Christian
  • MEIRA, DEBORA M.
  • Calvino, José J.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] To achieve high-loading of stable subnanometric metal clusters on solid carriers is a challenge since those small metal clusters have strong tendency to sinter into larger nanoparticles. Development of facile synthesis methodologies to obtain subnanometric metal catalysts with high metal loading and high stability against sintering at high temperature (>500 degrees C) in reductive atmosphere (such as H-2) is critical for the practical applications. In this work, we will present and discuss the generation of high-loading (similar to 1.4 wt%) subnanometric Pt clusters confined in the sinusoidal channels of MFI zeolite, on the basis of the atomic-level understanding on the evolution of Pt and Sn species during high-temperature oxidation-reduction treatments. It will be shown that the structural evolution of Pt and Sn species is dependent on the post-synthesis treatments. The Pt particles on the external surface can disintegrate into subnanometric Pt species and get stabilized in the zeolite channels during high-temperature calcination in air while Sn species migrate from surface region to internal region during high-temperature reduction treatment at 650 degrees C. The resultant material containing bimetallic PtSn clusters confined in the 10MR sinusoidal channels of the purely siliceous MFI zeolite show excellent catalytic activity and stability, as demonstrated for dehydrogenation of light alkanes at high reaction temperature. (C) 2020 Elsevier Inc. All rights reserved., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the "Severo Ochoa Program"(SEV-2016-0683). The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. The XAS measurements were carried out in CLAESS beamline of ALBA synchrotron and BM23 beamline at ESRF synchrotron. The kind supports from the scientific staffs in ALBA and ESRF are greatly appreciated. High-resolution STEM measurements were performed at DME-UCA node of ELECMI in Cadiz University, with financial support from FEDER/MINECO (MAT2017-87579-R and MAT2016-81118-P). C.W.L. thanks CAPES (Science without Frontiers Process no. 13191/13-6) for a predoctoral fellowship. Financial support on this work from ExxonMobil is greatly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Organic-inorganic supramolecular solid catalyst boosts organic reactions in water

  • García García, Pilar
  • Moreno Rodríguez, José María
  • Bruix, Marta
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Coordination polymers and metal-organic frameworks are appealing as synthetic hosts for mediating chemical reactions. Here we report the preparation of a mesoscopic metal-organic structure based on single-layer assembly of aluminium chains and organic alkylaryl spacers. The material markedly accelerates condensation reactions in water in the absence of acid or base catalyst, as well as organocatalytic Michael-type reactions that also show superior enantioselectivity when comparing with the host-free transformation. The mesoscopic phase of the solid allows for easy diffusion of products and the catalytic solid is recycled and reused. Saturation transfer difference and two-dimensional H-1 nuclear Overhauser effect NOESY NMR spectroscopy show that non-covalent interactions are operative in these host-guest systems that account for substrate activation. The mesoscopic character of the host, its hydrophobicity and chemical stability in water, launch this material as a highly attractive supramolecular catalyst to facilitate (asymmetric) transformations under more environmentally friendly conditions., This work was funded by ERC-AdG-2014-671093-SynCatMatch and the Generalitat Valenciana (Prometeo). M.B. acknowledges the funding: CTQ2014-52633-P. The Severo Ochoa program (SEV-2012-0267) is thankfully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Identification of Distinct Copper Species in Cu-CHA Samples Using NO as Probe Molecule. A Combined IR Spectroscopic and DFT Study

  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Millán-Cabrera, Reisel|||0000-0002-4489-5411
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Combining IR spectroscopy of NO adsorption on copper exchanged molecular sieves with the chabazite structure, i.e. Cu-SAPO-34 and Cu-SSZ-13, and theoretical calculations, different types of copper species have been identified. On one hand, [Cu¿OH]+ species can be accurately distinguished, characterized by a ¿NO frequency at 1788¿ 1798 cm¿1 depending on their location in the chabazite structure (6R vs. 8R) and composition (Cu-SAPO-34 vs. Cu-SSZ-13). On the other hand, dimeric copper oxo [Cu¿O¿ Cu]2+ species have been properly identified by means of DFT modelling, that proposes a ¿NO stretching frequency of 1887 cm¿1, which has been confirmed experimentally in the Cu-SAPO-34 sample. Finally the location of isolated Cu2+ ions either in the 6R units or in the 8R positions of the chabazite cavity could be accurately defined according to DFT data, and validated in the experimental IR spectra with IR bands between 1907 and 1950 cm¿1. Regarding to Cu+ species, IR spectroscopy of CO reveals different types of Cu+ species as evidenced by their ability to form mono, di and try carbonyls. The unambiguous differentiation of different types of copper species is of great interest in further identification of active sites for the NH3- SCR reaction., This work has been supported by the Spanish Government through "Severo Ochoa Program" (SEV 2012-0267), and MAT2015-71261-R, the European Union through ERC-AdG-2014-671093 (SynCatMatch); and the Generalitat Valenciana through the Prometeo program (PROMETEOII/2013/011). R.M. acknowledges "La Caixa - Severo Ochoa" International PhD Fellowships (call 2015).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Spectroscopic Evidence and Density Functional Theory (DFT) Analysis of Low-Temperature Oxidation of Cu+ to Cu2+NOx in Cu-CHA Catalysts: Implications for the SCR-NOx Reaction Mechanism

  • Moreno-González, Marta
  • Millán-Cabrera, Reisel|||0000-0002-4489-5411
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
[EN] Despite the intense investigation on the NH3-SCR-NOx reaction mechanism catalyzed by small pore Cu-CHA zeolites, neither the rate-determining step of the process nor the exact nature of the active sites under reaction conditions are clearly established. In this work, in situ EPR and IR techniques combined with DFT calculations are applied to the study of the oxidation half-cycle of the NH3-SCR-NOx reaction on Cu-SSZ-13 and Cu-SAPO-34 catalysts. EPR and IR spectroscopies unambiguously show that Cu+ is oxidized to Cu2+ at room temperature in the presence of the reaction mixture (NO, O-2, and NH3) or NO and O-2, producing adsorbed NO2, nitrites, and nitrates. Several pathways are proposed from DFT calculations to oxidize Cu+ cations placed in the plane of the 6R ring units of SSZ-13 and SAPO-34 to Cu2+, either by NO2 alone or by a mixture of NO and O-2, with activation energy barriers lower than 70 kJ mol(-1). The results reported here demonstrate that a reaction mechanism invoking the formation of nitrate/nitrite intermediates on copper cations attached to the zeolite framework can be operational in the low-temperature region (T < 350 degrees C). Moreover, different intermediates, nitrites versus nitrates, are preferentially stabilized, depending on the catalyst composition, silicoaluminophosphate vs aluminosilicate., This work was supported by the Spanish Government through "Severo Ochoa Program" (Nos. SEV 2012-0267; SEV-2016-0683), No. MAT2015-71261-R, and No. CTQ2015-68951-C3-1-R, and by the European Union through No. ERC-AdG-2014-671093 (SynCatMatch). Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are gratefully acknowledged for computational resources and technical support. R.M. acknowledges "La Caixa-Severo Ochoa" International PhD Fellowships (call 2015).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Heterogeneous catalysis: understanding the fundamentals for catalyst design

  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Taking the chemoselective hydrogenation of substituted nitroaromatics as a base case, it will be shown that it is possible to design improved and new catalysts by attacking the problem in a multidisciplinary way. By combining molecular modeling with in situ operando spectroscopy, and with micro-kinetic and isotopic studies, it is possible to determine how and where on the catalysts the reactant molecules interact. Then, materials synthesis methods can be applied to prepare catalysts with the desired surface active sites and their selective interaction with the reactants., This work was funded by the Spanish Government (Severo Ochoa program SEV2012-0267). The support of the European Union by (ERC-AdG-2014-671093 – SynCatMatch) is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stabilized Ru[(H2O)(6)](3+) in Confined Spaces (MOFs and Zeolites) Catalyzes the lmination of Primary Alcohols under Atmospheric Conditions with Wide Scope

  • Mon, Marta
  • Adam-Ortiz, Rosa
  • Ferrando-Soria, Jesus
  • Pardo, Emilio
  • Armentano, Donatella
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] Imines are ubiquitous intermediates in organic synthesis, and the metal-mediated imination of alcohols is one of the most direct and simple methods for their synthesis. However, reported protocols lack compatibility with many other functional groups since basic supports/media, pure oxygen atmospheres, and/or released hydrogen gas are required during reaction. Here we show that, in contrast to previous metal-catalyzed methods, hexa-aqueous Ru(III) catalyzes the imination of primary alcohols with very wide functional group tolerance, at slightly acid pH and under low oxygen atmospheres. The inorganic metal complex can be supported and stabilized, integrally, within either faujasite-type zeolites (Y and X) or a metal organic framework (MOF), to give a reusable heterogeneous catalyst which provides an industrially viable process well below the flammability limit of alcohols and amines., This work was supported by the MINECO (Spain) (Projects CTQ2017-86735-P, CTQ2016-75671-P, CTQ2014-56312-P, CTQ2014-55178-R, and MAT2013-40823-R and Excellence Units "Severo Ochoa" SEV2016-0683 and "Maria de Maeztu" and MDM-2015-0538) and the European Union through ERC-AdG-2014-671093 (SynCatMatch) and the Ministero dell'Istruzione, dell'Universita e della Ricerca (Italy) (FFABR 2017). M.M. thanks the MINECO for a predoctoral contract. RA. thanks UPV for a postdoctoral contract. J.F.-S. acknowledges financial support from the Subprograma Atraccio de Talent - Contractes Postdoctorals de la Universitat de Valencia. We also acknowledge SOLEIL for provision of the synchrotron radiation facility and thank Pierre Fertey for his assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design and Synthesis of the Active Site Environment in Zeolite Catalysts for Selectively Manipulating Mechanistic Pathways

  • Li, Chengeng
  • Ferri-Vicedo, Pau
  • Paris, Cecilia|||0000-0002-5673-8114
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] By combining kinetics and theoretical calculations, we show here the benefits of going beyond the concept of static localized and defined active sites on solid catalysts, into a system that globally and dynamically considers the active site located in an environment that involves a scaffold structure particularly suited for a target reaction. We demonstrate that such a system is able to direct the reaction through a preferred mechanism when two of them are competing. This is illustrated here for an industrially relevant reaction, the diethylbenzene-benzene transalkylation. The zeolite catalyst (ITQ-27) optimizes location, density, and environment of acid sites to drive the reaction through the preselected and preferred diaryl-mediated mechanism, instead of the alkyl transfer pathway. This is achieved by minimizing the activation energy of the selected pathway through weak interactions, much in the way that it occurs in enzymatic catalysts. We show that ITQ-27 outperforms previously reported zeolites for the DEB-Bz transalkylation and, more specifically, industrially relevant zeolites such as faujasite, beta, and mordenite., This work was supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), Spanish Government through "Severo Ochoa" (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-10103-B-I00 (MCIU/AEI/FEDER, UE), and by Generalitat Valenciana through AICO/2019/060. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Espanola de Supercomputacion (RES) and Servei d'Informatica de la Universitat de Valencia (SIUV) are acknowledged for computational resources and technical support. P. F. and C. Li thank ITQ for their contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improving the catalytic performance of SAPO-18 for the methanol-to-olefins (MTO) reaction by controlling the Si distribution and crystal size

  • Martínez Franco, Raquel
  • Li, Zhibin
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The physico-chemical properties of the small pore SAPO-18 zeotype have been controlled by properly selecting the organic molecules acting as organic structure directing agents (OSDAs). The two organic molecules selected to attempt the synthesis of the SAPO-18 materials were N,N-diisopropylethylamine (DIPEA) and N,N-dimethyl-3,5-dimethylpiperidinium (DMDMP). On the one hand, DIPEA allows small crystal sizes (0.1-0.3 mu m) to be attained with limited silicon distributions when the silicon content in the synthesis gel is high (Si/TO2 similar to 0.8). On the other hand, the use of DMDMP directs the formation of larger crystallites (0.9-1.0 mu m) with excellent silicon distributions, even when the silicon content in the synthesis media is high (Si/TO2 similar to 0.8). It is worth noting that this is the first description of the use of DMDMP as OSDA for the synthesis of the SAPO-18 material, revealing not only the excellent directing role of this OSDA in stabilizing the large cavities present in the SAPO-18 structure, but also its role in selectively placing the silicon atoms in isolated framework positions. The synthesized SAPO-18 materials have been characterized by different techniques, such as powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), N-2 adsorption, solid state NMR, and ammonia temperature programmed desorption (NH3-TPD). Finally, their catalytic activity has been evaluated for the methanol-to-olefin (MTO) process at different reaction temperatures (350 and 400 degrees C), revealing that the SAPO-18 catalysts with optimized silicon distributions and crystal sizes show excellent catalytic properties for the MTO reaction. These optimized SAPO-18 materials present improved catalyst lifetimes compared to standard SAPO-34 and SSZ-39 catalysts, even when tested at low reaction temperatures (i.e. 350 degrees C)., Financial support by the Spanish Government-MINECO through “Severo Ochoa” (SEV 2012-0267), MAT2015-71261-R, and CTQ2015-68951-C3-1-R; by the European Union through ERC-AdG-2014-671093 (SynCatMatch); and by the Generalitat Valenciana through the Prometeo program (PROMETEOII/2013/011) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Organic-Inorganic Hybrid Materials: Multi-Functional Solids for Multi-Step Reaction Processes

  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The design of new hybrid materials with tailored properties at the nano-, meso-, and macro-scale, with the use of structural functional nanobuilding units, is carried out to obtain specific multi-functional materials. Organization into controlled 1D, 2D, and 3D architectures with selected functionalities is key for developing advanced catalysts, but this is hardly accomplished using conventional synthesis procedures. The use of pre-formed nanostructures, derived either from known materials or made with specific innovative synthetic methodologies, has enormous potential in the generation of multi-site catalytic materials for one-pot processes. The present concept article introduces a new archetype wherein self-assembled nanostructured builder units are the base for the design of multifunctional catalysts, which combine catalytic efficiency with fast reactant and product diffusion. The article addresses a new generation of versatile hybrid organic-inorganic multi-site catalytic materials for their use in the production of (chiral) high-added-value products within the scope of chemicals and fine chemicals production. The use of those multi-reactive solids for more nanotechnological applications, such as sensors, due to the inclusion of electron donor-acceptor structural arrays is also considered, together with the adsorption-desorption capacities due to the combination of hydrophobic and hydrophilic sub-domains. The innovative structured hybrid materials for multipurpose processes here considered, can allow the development of multi-stage one-pot reactions with industrial applications, using the materials as one nanoreactor systems, favoring more sustainable production pathways with economic, environmental and energetic advantages., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Encapsulation of Palladium Carbide Subnanometric Species in Zeolite Boosts Highly Selective Semihydrogenation of Alkynes

  • Bai, Risheng
  • He, Guangyuan
  • Li, Lin
  • Zhang, Tianjun
  • Li, Junyan
  • Wang, Xingxing
  • Wang, Xiumei
  • Zou, Yongcun
  • Mei, Donghai
  • Yu, Jihong
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The selective hydrogenation of alkynes to alkenes is a crucial step in the synthesis of fine chemicals. However, the widely utilized palladium (Pd)-based catalysts often suffer from poor selectivity. In this work, we demonstrate a carbonization-reduction method to create palladium carbide subnanometric species within pure silicate MFI zeolite. The carbon species can modify the electronic and steric characteristics of Pd species by forming the predominant Pd-C-4 structure and, meanwhile, facilitate the desorption of alkenes by forming the Si-O-C structure with zeolite framework, as validated by the state-of-the-art characterizations and theoretical calculations. The developed catalyst shows superior performance in the selective hydrogenation of alkynes over mild conditions (298 K, 2 bar H-2), with 99 % selectivity to styrene at a complete conversion of phenylacetylene. In contrast, the zeolite-encapsulated carbon-free Pd catalyst and the commercial Lindlar catalyst show only 15 % and 14 % selectivity to styrene, respectively, under identical reaction conditions. The zeolite-confined Pd-carbide subnanoclusters promise their superior properties in semihydrogenation of alkynes., The authors thank the National Natural Science Foundation of China (Grant 21920102005, 22288101, 21835002, and 91961119), the National Key Research and Development Program of China (Grant 2021YFA1501202), the 111 Project (B17020), the European Union through the European Research Council (Grant ERC-AdG-2014-671093, SynCatMatch), and the Spanish Government through "Severo Ochoa" (SEV-2016-0683, MINECO) for supporting this work. R. B. thanks the National Natural Science Foundation of China (Grant 22201094) and the Jilin Youth Growth Science and Technology Plan Project (Grant 20230508189RC) for funding. The Centre for High-resolution Electron Microscopy (C & hstrok;EM), supported by SPST of ShanghaiTech University under Contract EM02161943 is acknowledged for their help on electron microscopy.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Control of zeolite framework flexibility and pore topology for separation of ethane and ethylene

  • Bereciartua-Pérez, Pablo Javier
  • Corcoran Jr., Edward W.
  • Kortunov, Pavel
  • Ravikovitch, Peter I.
  • Burton, Allen
  • Yoon, Chris
  • Wang, Yu
  • Paur, Charanjit
  • Guzman, Javier
  • Bishop, Adeana R.
  • Casty, Gary L.
  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Valencia Valencia, Susana|||0000-0001-7160-2795
[EN] The discovery of new materials for separating ethylene from ethane by adsorption, instead of using cryogenic distillation, is a key milestone for molecular separations because of the multiple and widely extended uses of these molecules in industry. This technique has the potential to provide tremendous energy savings when compared with the currently used cryogenic distillation process for ethylene produced through steam cracking. Here we describe the synthesis and structural determination of a flexible pure silica zeolite (ITQ-55). This material can kinetically separate ethylene from ethane with an unprecedented selectivity of ~100, owing to its distinctive pore topology with large heart-shaped cages and framework flexibility. Control of such properties extends the boundaries for applicability of zeolites to challenging separations., We gratefully acknowledge financial support from ExxonMobil Research and Engineering Company, Instituto de Tecnologia Quimica researchers also thank the European Research Council (grant ERC-2014-AdG-671093 "MATching zeolite SYNthiesis with CATalytic activity") and the Spanish government (grants MAT2015-71842-P MINECO/FEDER and Severe Ochea SEV-2012-0267 and SEV-2016-0683) for economic support
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Organic-inorganic supramolecular solid catalyst boosts organic reactions in water

  • García-García, Pilar
  • Moreno, José María
  • Díaz Morales, Urbano
  • Bruix Bayés, Marta
  • Corma, Avelino
Coordination polymers and metal-organic frameworks are appealing as synthetic hosts for mediating chemical reactions. Here we report the preparation of a mesoscopic metal-organic structure based on single-layer assembly of aluminium chains and organic alkylaryl spacers. The material markedly accelerates condensation reactions in water in the absence of acid or base catalyst, as well as organocatalytic Michael-type reactions that also show superior enantioselectivity when comparing with the host-free transformation. The mesoscopic phase of the solid allows for easy diffusion of products and the catalytic solid is recycled and reused. Saturation transfer difference and two-dimensional (1)H nuclear Overhauser effect NOESY NMR spectroscopy show that non-covalent interactions are operative in these host-guest systems that account for substrate activation. The mesoscopic character of the host, its hydrophobicity and chemical stability in water, launch this material as a highly attractive supramolecular catalyst to facilitate (asymmetric) transformations under more environmentally friendly conditions., This work was funded by ERC-AdG-2014-671093-SynCatMatch and the Generalitat Valenciana (Prometeo). M.B. acknowledges the funding: CTQ2014-52633-P. The Severo Ochoa program (SEV-2012-0267) is thankfully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Accelerated crystallization of zeolites via hydroxyl free radicals

  • Feng, Guodong
  • Boronat, Mercedes
  • Corma, Avelino
  • Yu, Jihong
Feng, Guodong et al., In the hydrothermal crystallization of zeolites from basic media, hydroxide ions (OH–) catalyze the depolymerization of the aluminosilicate gel by breaking the Si,Al–O–Si,Al bonds and catalyze the polymerization of the aluminosilicate anions around the hydrated cation species by remaking the Si,Al–O–Si,Al bonds. We report that hydroxyl free radicals (•OH) are involved in the zeolite crystallization under hydrothermal conditions. The crystallization processes of zeolites—such as Na–A, Na–X, NaZ–21, and silicalite-1—can be accelerated with hydroxyl free radicals generated by ultraviolet irradiation or Fenton’s reagent., This work was supported by the 973 Project (grants 2014CB931802 and 2013CB921802) and the National Natural Science Foundation of China (grants 21320102001, 91122029, and 21571075). A.C. thanks the Program Severo Ochoa for financial support and ERC-AdG-2014-671093—SynCatMatch., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A heterogeneous mechanism for the catalytic decomposition of hydroperoxides and oxidation of alkanes over CeO2 nanoparticles: A combined theoretical and experimental study

  • López-Ausens, Tirso
  • Boronat, Mercedes
  • Concepción, Patricia
  • Chouzier, Sandra
  • Mastroianni, Sergio
  • Corma, Avelino
A nanoparticulate CeO2 catalyst is presented that is able to oxidize cyclohexane to K/A-oil (a mixture of cyclohexanone and cyclohexanol) using hydroperoxides as oxidizing species. The improvement in selectivity with decreasing particle size suggests the existence of a structure-activity relationship in this process, and points to a preferential activation of cyclohexane at defective corner or edge sites. A detailed theoretical study of the reaction mechanism over three different CeO2 catalyst models shows that cyclohexane is preferentially activated by bicoordinated oxygen atoms present at the edges of small particles, following a Mars van Krevelen mechanism which has been confirmed by in situ IR spectroscopy and 18O/16O isotopic exchange experiments. The process is fully heterogeneous, and the catalyst can be reused without loss of activity up to four cycles., The authors thank Solvay, MINECO (Consolider Ingenio 2010-MULTICAT, CSD2009-00050 and Severo Ochoa program, SEV-2012-0267), Generalitat Valenciana (PROMETEOII/2013/011 Project) and the European Union (ERC-AdG-2014-671093 — SynCatMatch) for financial support. Red Española de Supercomputación (RES) and Centre de Càlcul de la Universitat de València are gratefully acknowledged for computational facilities and technical assistance. The technical support of the Electronic Microscopy Service of UPV is kindly appreciated. T.L.-A. thanks ITQ for a contract., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A new strategy to transform mono and bimetallic non-noble metal nanoparticles into highly active and chemoselective hydrogenation catalysts

  • Liu, Lichen
  • Gao, Fei
  • Concepción, Patricia
  • Corma, Avelino
A new strategy to transform non-noble metal oxide nanoparticles (NPs) into highly active and selective metallic NPs as hydrogenation catalysts by a simple carbon coating process based on hydrothermal treatment with glucose is presented. During the carbon coating process, metal oxide NPs will be reduced to metallic NPs and covered by thin carbon layers, resulting in formation of Metal@C NPs. Through this method, monometallic Co@C has been prepared, which shows excellent activity and selectivity for chemoselectivity hydrogenation of substituted nitroarenes to corresponding anilines under mild conditions. Kinetic, isotopic and spectroscopic studies indicate that hydrogen dissociation-addition is the controlling step in chemoselective hydrogenation reaction with Co@C NPs. Stabilization and the reaction rate of metallic Co are improved by preparing bimetallic CoNi@C catalyst, leading to almost fivefold improved activity. Our preparation method enables to synthesize non-noble bimetallic CoNi@C nanoparticles with nearly one-order magnitude higher activity than any Co-based non-noble metal catalysts prepared by other methods, without necessity to involve the promoting role of metal-N interactions. At last, we also show the application of Co@C NPs for hydrogenation of levulinic acid to γ-valerolactone., L.L. thanks ITQ for providing a contract. F.G. thanks the financial support from Jiangsu Key Laboratory of Vehicle Emissions Control. The authors also thank Microscopy Service of UPV for kind help on TEM and STEM measurements. Financial supports by the “Severo Ochoa” and ERC-AdG-2014-671093—SynCatMatch program are also gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cage-based small-pore catalysts for NH3-SCR prepared by combining bulky organic structure directing agents with modified zeolites as reagents

  • Martín, Nuria
  • Paris Carrizo, Cecilia Gertrudis
  • Vennestrøm, Peter N. R.
  • Thøgersen, Joakim
  • Moliner Marín, Manuel
  • Corma, Avelino
It has been possible to efficiently synthesize high-silica ERI and AFX zeolites with nano-sized primary crystallites (30–200 nm). This was achieved by using a dicationic and rigid organic structure directing agent (OSDA) that fits within the large cavities of these zeolites, and the use of FAU zeolites as initial Si- and Al-sources. Cu- and Fe-based ERI and AFX materials were prepared following both post-synthetic cation exchange and direct synthesis methodologies, showing good activity for the selective catalytic reduction (SCR) of nitrogen oxide using ammonia. Accelerated hydrothermal ageing of the zeolites at high temperature (i.e. 750 °C) shows the necessity of removing the alkali cations remaining in the zeolites to obtain stable materials. Furthermore, the catalytic performance of the prepared Cu- and Fe-containing AFX catalysts, both before and after ageing treatment, approaches the catalytic activity of Cu- and Fe-CHA., This work has been supported by Haldor Topsøe A/S, by the Spanish Government-MINECO through “Severo Ochoa” (SEV 2012-0267), and MAT2015-71261-R, by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Fundación Ramón Areces through a research contract of the “Life and Materials Science” program. N. M. thanks MINECO for economical support through pre-doctoral fellowship (BES-2013-064347)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Crude oil to chemicals: light olefins from crude oil

  • Corma, Avelino
  • Corresa, Elena
  • Mathieu, Yannick
  • Sauvanaud, Laurent L. A.
  • Al-Bogami, S.
  • Al-Ghrami, M. S.
  • Bourane, A.
The possibility to fulfill the increasing market demand and producers' needs in processing crude oil, a cheap and universally available feedstock, to produce petrochemicals appears to be a very attractive strategy. Indeed, many petrochemicals are produced as side streams during crude oil refining, which primary goal remains transportation fuel production. Availability of some critical feedstocks may then depend on local refining policy. In order to improve flexibility, it has been proposed to directly crack crude oil to produce petrochemicals, in particular light olefins (ethylene, propylene, butenes), using technologies derived from fluid catalytic cracking. This paper attempts to review the main research works done on the topic in the literature in the last five decades, focussing on process as well as catalyst technology, with a special interest for fluid catalytic cracking (FCC) based technology that can be used towards maximizing chemicals from crude oil. Factors investigated include use of severe cracking conditions, on-purpose additives (from ZSM5 to more exotic, metal doped additives), recycle streams and multiple riser systems., The authors thank Saudi Aramco for material and financial support. Financial support by the Spanish Government MINECO through program “Severo Ochoa” (SEV 2012-0267), Consolider Ingenio (2010-Multicat, CSD-2009-0050), MAT2012-31657, CTQ2015-70126-R (MINECO/FEDER), by the European Union through ERC-AdG-2014-671093–SynCatMatch and by the Generalitat Valenciana through the Prometeo program (PROMETEOII/2013/011) is also acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cu-zeolite catalysts for NOx removal by selective catalytic reduction with NH3 and coupled to NO storage/reduction monolith in diesel engine exhaust aftertreatment systems

  • De-La-Torre, Unai
  • Pereda-Ayo, Beñat
  • Moliner Marín, Manuel
  • González-Velasco, Juan R.
  • Corma, Avelino
Coupled NSR-SCR systems comprising a Pt-BaO/Al2O3 NSR monolith and Cu/CHA, Cu/ZSM-5 or Cu/BETA SCR catalysts are prepared and tested for NOx removal from diesel and lean burn engines exhaust gases. The Cu/zeolite catalysts are characterized by ICP-AES, XRD, N2 adsorption-desorption, NH3-TPD and H2-TPR. The physico-chemical characteristics of fresh catalysts and aged under 5% steam/Ar at 750 °C for 16 h and are compared, resulting in the Cu/CHA with much higher hydrothermal resistance to the loss of textural and structural properties. The single-SCR, single-NSR and coupled NSR-SCR catalytic performance is studied including the conversion of NO and NH3, slip of NH3, and N2O and NO2 yields. Cu/CHA presents the SCR wider temperature window, eventually 100% NO conversion from 220 to 380 °C, even maintained after severe aging. For application in the NSR-SCR technology, the NH3 generated in the NSR catalyst during the rich period is able to achieve higher NO conversion reducing significantly the slip of NH3 (negligible at 200 °C and above), very few amount of N2O at any temperature, and small production of NO2 only at higher temperatures. This improvement of activity and selectivity is particularly enhanced with the coupled NSR-Cu/CHA system, which is also maintained when the catalyst is deposited on the cordierite monolith substrate, as in the case of real application., The authors wish to acknowledge the financial support by the Spanish Economy and Competitiveness Ministry [CTQ2012-32899; MAT2012-3716, and “Severo Ochoa” (SEV 2012-0267)], the Basque Government (IT657-013), and the European Union (SynCatMatch project; ERC-AdG-2014-671093). One of the authors (UDLT) acknowledge to the Basque Government for the PhD Research Grant (BFI-2010-330)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient oligomerization of pentene into liquid fuels on nanocrystalline beta zeolites

  • Díaz-Rey, M. Rocío
  • Paris Carrizo, Cecilia Gertrudis
  • Martínez-Franco, Raquel
  • Moliner Marín, Manuel
  • Martínez Sánchez, Cristina
  • Corma, Avelino
Light alkenes oligomerization, performed in the presence of heterogeneous acid catalysts, is an interesting alternative for the production of clean liquid fuels. The process, when catalyzed by zeolites, is flexible and can be directed to the formation of oligomers in the gasoline, jet fuel, or diesel range by adjusting the reaction conditions and the zeolite’s structure. Herein we show how reducing the crystal size of large-pore Beta zeolites down to 10–15 nm and controlling the number and strength distribution of their Brønsted acid sites leads to highly active and stable catalysts, selective to true oligomers within the naphtha and, especially, the diesel range. The shorter diffusion path lengths in the smaller crystallites and the reduced Brønsted acid site density of the two nanosized beta zeolites (10–15 nm) synthesized with Si/Al = 15 lead to 1-pentene conversion above 80% during the 6 h time on stream (TOS) at a space time (W/F) of 2.8 g·h·mol–1. This value is higher than the olefin conversion obtained for a commercial nanobeta (30 nm) at a 3-fold space time of 9.1 g·h·mol–1., Financial support by the Spanish Government-MINECO through “Severo Ochoa” (SEV-2016-0683), MAT2015-71261-R and CTQ2015-70126-R, by the Fundacion Ramón Areces through a research project within the “Life and Materials Sciences” program, and by the European Union through ERCAdG-2014-671093−Syn-CatMatch is acknowledged. M.R.D-R. acknowledges “La Caixa−Severo Ochoa” International PhD Fellowships (call 2015)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Facile synthesis of surface-clean monodispersed CuOx nanoparticles and their catalytic properties for oxidative coupling of alkynes

  • Liu, Lichen
  • Matsushita, Toshiyuki
  • Concepción, Patricia
  • Leyva, Antonio
  • Corma, Avelino
We show a facile method to prepare surface-clean monodispersed small and stable CuOx nanoparticles with controllable average sizes from below 1 nm up to ∼5 nm without using bulk capping agent. Structural and surface characterizations show that the chemical states of CuOx nanoparticles and their interactions with O are dependent on the particle size. To show their relevance to catalysis, the well-defined monodispersed CuOx nanoparticles have been used for oxidative coupling of alkynes. While the generally used CuCl catalysts presents a reaction induction period and agglomerate into CuOx nanoparticles during the reaction, the induction period disappears when monodispersed CuOx nanoparticles (∼2 nm) were used as catalyst. Supported CuOx nanoparticles on TiO behave in the same way as monodispersed CuOx nanoparticles. Kinetic, spectroscopic, and isotopic studies show that O activation is the rate-controlling step and that the nature of the oxygen species formed on supported CuOx nanoparticles is dependent on the size of CuOx and determine the catalytic properties for oxidative coupling of alkynes., Financial supports from ConsoliderIngenio 2010 (project MULTICAT) and “Severo Ochoa” program are also gratefully acknowledged. The European Union is also acknowledged by ERC-AdG-2014-671093 - SynCatMatch., Peer Reviewed