Skip to main content

SINTESIS Y CARACTERIZACION AVANZADA DE NUEVOS MATERIALES ZEOLITICOS Y APLICACIONES EN ADSORCION, MEDIOAMBIENTE Y EN LA CONSERVACION DE ALIMENTOS

MAT2015-71842-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 35
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Estimating CO2/N2 Permselectivity through Si/Al = 5 Small-Pore Zeolites/PTMSP Mixed Matrix Membranes: Influence of Temperature and Topology

  • Casado, Clara
  • Fernández-Barquín, Ana
  • Irabien, Ángel
  • Valencia Valencia, Susana|||0000-0001-7160-2795
[EN] In the present work, the effect of zeolite type and topology on CO2 and N-2 permeability using zeolites of different topology (CHA, RHO, and LTA) in the same Si/Al = 5, embedded in poly(trimethylsilyl-1-propyne) (PTMSP) is evaluated with temperature. Several models are compared on the prediction of CO2/N-2 separation performance and then the modified Maxwell models are selected. The CO2 and N-2 permeabilities through these membranes are predicted with an average absolute relative error (AARE) lower than 0.6% taking into account the temperature and zeolite loading and topology on non-idealities such as membrane rigidification, zeolite-polymer compatibility and sieve pore blockage. The evolution of this structure-performance relationship with temperature has also been predicted., This research was funded by Spanish MINECO-General Secretariat for Research, Development and Innovation under project CTQ2016-76231-C2-1-R at the University of Cantabria, and MAT2015-71842-P, at the Instituto de Tecnologia Quimica.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A highly stable and hierarchical tetrathiafulvalene-based metal organic framework with improved performance as a solid catalyst

  • Souto, Manuel
  • Santiago-Portillo, Andrea
  • Vitorica-Yrezabal, Iñigo J.
  • Vieira, Bruno J. C.
  • Waerenborgh, João C.
  • Minguez Espallargas, Guillermo
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Herein we report the synthesis of a tetrathiafulvalene (TTF)-based MOF, namely MUV-2, which shows a non-interpenetrated hierarchical crystal structure with mesoporous one-dimensional channels of ca. 3 nm and orthogonal microporous channels of ca. 1 nm. This highly stable MOF (aqueous solution with pH values ranging from 2 to 11 and different organic solvents), which possesses the well-known [Fe3(¿3-O)(COO)6] secondary building unit, has proven to be an efficient catalyst for the aerobic oxidation of dibenzothiophenes., The work has been supported by the European Union (ERC-2016-CoG 724681-S-CAGE) and the Spanish MINECO (CTQ 2014-59209-P, CTQ2017-89528-P and MAT2015-71842-P). We also thank the Spanish government for the provision of a Severo Ochoa project (SEV-2016-0683) and a Maria de Maeztu project (MDM-2015-0538). G.M.E. and M.S. thank MINECO for a Ramon y Cajal and a Juan de la Cierva-Formacion fellowships, respectively. We thank J. M. Martinez-Agudo, G. Agusti and J. Romero from the University of Valencia for their magnetic and cyclic voltammetry measurements. We thank the Diamond Light Source (UK) for the synchrotron beamtime. C2TN/IST authors acknowledge the Portuguese Foundation for Science and Technology (FCT), contract UID/Multi/04349/2013.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An in situ XAS study of the activation of precursor-dependent Pd nanoparticles

  • Wittee Lopes, Christian
  • Cerrillo, José Luis
  • Agostini, G.
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The activation of precursor-dependent Pd nanoparticles was comprehensively followed by in situ X-ray absorption spectroscopy on two inorganic supports for rationalizing the final catalytic activity. Two series of Pd-based catalysts (7 wt% Pd) were prepared by impregnation of gamma-Al2O3 and activated carbon supports varying the metal precursor (Pd(NO3)(2), PdCl2 and Pd(OAc)(2)). The most relevant physicochemical properties of the studied catalysts were determined by several techniques including ICP-OES, XRD, N-2 adsorption and XAS. The results indicate that the thermal stability of the metal precursor plays an important role in the size and speciation of the formed Pd nanoparticles after the activation process. The Cl-based precursor, which presents high thermal stability, passes through a PdOxCly mixed phase when submitted to calcination on Pd/Al2O3 and leaves Cl-species after metal reduction on Pd/C (which can be detrimental to catalytic reactions). Differently, Pd(OAc)(2) and Pd(NO3)(2) promote the formation of larger species due to different precursor decomposition pathways. Ordered PdO is observed even before calcination when Pd(NO3)(2) was used as a metallic source, which translates into large nanoparticles after reduction in H-2. By using the average coordination numbers of Pd species obtained from EXAFS data of the as-reduced catalysts, a correlation was observed comparing the three precursors: PdCl2 generates smaller nanoparticles than Pd(OAc)(2), which in turn generates smaller nanoparticles than Pd(NO3)(2), regardless of the support used for catalyst preparation., The authors thank the Spanish Ministry of Economy and Competitiveness through MAT2015-71842-P (MINECO/FEDER) and SEV-2016-0683 projects for the financial support. We gratefully acknowledge ALBA synchrotron for allocating beamtime (proposal 2015091414), Carlo Marini and CLAESS beamline staff for their help and technical support during our experiment. C. W. Lopes (Science without Frontiers - Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship. J.L. Cerrillo wishes to thank MINECO for the Severo Ochoa contract for PhD formation (SVP-2014-068600).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Intensified biobutanol recovery using zeolites with complementary selectivity

  • Van der Perre, Stijn
  • Gelin, Pierre
  • Claessens, Benjamin
  • Martin-Calvo, Ana
  • Saint Remi, Julien Cousin
  • Duerinck, Tim
  • Baron, Gino V.
  • Sánchez, Ledys Yelitza
  • Shang, Jin
  • Singh, Ranjeet
  • Webley, Paul A.
  • Denayer, Joeri F. M.
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] A vapor phase adsorptive recovery process is proposed as an alternative way to isolate biobutanol from acetone-butanolethanol (ABE) fermentation media, offering several advantages compared to liquid phase separation. The effect of water, which is still present in large quantities in vapor phase, on the adsorption of the organics could be minimized by using hydrophobic zeolites. Shape selective all-silica zeolites CHA and LTA were prepared and evaluated via single component isotherms and breakthrough experiments. These zeolites show an opposite selectivity; adsorption of ethanol was favorable on all-silica CHA, while the LTA topology had clear preference for butanol. The molecular sieving properties of both zeolites allowed to easily eliminate acetone from the mixture. The molecular interaction mechanisms were studied by density functional theory (DFT) simulations. Effect of mixture composition, humidity and total pressure of the vapor stream on the selectivity and separation behavior was investigated. Desorption profiles were studied to maximize butanol purity and recovery. The combination of LTA with CHA type zeolites (Si-CHA or SAPO-34) in sequential adsorption columns with alternating adsorption and desorption steps allows to obtain butanol in unpreceded purity and recovery. A butanol purity of 99.7 mole% could be obtained at nearly complete butanol recovery, demonstrating the effectiveness of this technique for biobutanol separation processes., S.V.D.P. and J.F.M.D. are grateful to FWO Vlaanderen for financial support (G025614N). M.P., L.Y.S., S.V. and F.R. gratefully acknowledge financial support of Spanish Government (MAT2015-71842P and Severo Ochoa SEV-2012-0267). The authors thank to A. Vidal and T. Blasco for performing NMR measurements and discussion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Inelastic Neutron Scattering Study on the Location of Bronsted Acid Sites in High Silica LTA Zeolite

  • Lemishko, Tetiana
  • Jiménez-Ruiz, Mónica
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
The presence of Bronsted acid sites (SiOHAl) is crucial in many of the applications of zeolites in petroleum refining and related industries. This acidity relies on the number and location of acid sites, but the latter is difficult to know accurately in spite of a large number of experimental techniques available. Zeolites usually contain many types of acid sites depending on the crystallographic different O-sites and their chemical environment. In the present work we show how inelastic neutron scattering (INS) can be employed for an accurate determination of the location of Bronsted acid sites in zeolites. This is achieved using a sample of LTA zeolite with few defects of connectivity, few (O1H, O2H, O3H) crystallographically different oxygens, and high Si/Al ratio. The narrow and intense peaks corresponding to SiOH bending modes ca. 1100 cm(-1) have been shown, using periodic DFT calculations, to strongly depend on the type of oxygen to which the proton is bonded. A comparison between calculations and INS experiments shows that a large majority of the protons in the sample are of the type O2H, which-vibrate close to the small cavity of LTA., Ministerio de Economia y Competitividad of Spain is thanked for funding through "Severo Ochoa" (SEV-2012-0267) and MAT2015-71842-P projects. All authors thank the ILL for neutron beam-time allocation (Experiment 7-04-144) and the ILL C-Lab for simulation support. G.S. thanks the CTI-CSIC for the use of computational facilities. G.S. and T.L. thank the ILL for the provision of contract SRH/GRI/AS-15/222 and the Ph.D. contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Gas confinement in compartmentalized coordination polymers for highly selective sorption

  • Giménez-Marqués, Mónica
  • Calvo Galve, Néstor
  • Vitorica-Yrezabal, Iñigo J.
  • Jiménez-Ruiz, Mónica
  • Rodríguez-Velamazán, J. Alberto
  • González, Miguel A.
  • Coronado, Eugenio
  • Minguez Espallargas, Guillermo
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
[EN] Discrimination between different gases is an essential aspect for industrial and environmental applications involving sensing and separation. Several classes of porous materials have been used in this context, including zeolites and more recently MOFs. However, to reach high selectivities for the separation of gas mixtures is a challenging task that often requires the understanding of the specific interactions established between the porous framework and the gases. Here we propose an approach to obtain an enhanced selectivity based on the use of compartmentalized coordination polymers, named CCP-1 and CCP-2, which are crystalline materials comprising isolated discrete cavities. These compartmentalized materials are excellent candidates for the selective separation of CO2 from methane and nitrogen. A complete understanding of the sorption process is accomplished with the use of complementary experimental techniques including X-ray diffraction, adsorption studies, inelastic- and quasi-elastic neutron scattering, magnetic measurements and molecular dynamics calculations., Financial support from the Spanish MINECO (CTQ2014-59209-P, MAT2014-56143-R and MAT2015-71842-P), the Generalitat Valenciana (Prometeo and ISIC-Nano programs), the EU (ERC-2016-CoG 724681-S-CAGE) and the VLC/Campus Program is gratefully acknowledged. We thank the Spanish government for the provision of a Severo Ochoa project (SEV-2012-0267) and a Maria de Maeztu project (MDM-2015-0538). M. G.-M. thanks MICINN for a predoctoral FPU grant and the EU for a Marie Sklodowska-Curie postdoctoral fellowship (H2020-MSCA-IF-EF-658224). N. C. G. thanks the Generalitat Valenciana for a VALi+d predoctoral fellowship. J. A. R. -V. acknowledges CSIC for a JAE-doc contract. G. S. thanks SGAI-CSIC for computing time. G. M. E. acknowledges the Blaise Pascal International Chair for financial support and the Ramon y Cajal Programme. J. M. Martinez-Agudo and G. Agusti from the University of Valencia are gratefully acknowledged for magnetic measurements. We are grateful to Institut Laue-Langevin for neutron beam time allocation for INS and QENS experiments (DOI: 10.5291/ILL-DATA.7-05-426). Authors thank ALBA Synchrotron for beam time allocation at BL04-MSPD beamline for HR-PXDR measurements, as well as the collaboration of ALBA staff during the experiment (proposal 2015091491)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Zeolite structure determination using genetic algorithms and geometry optimisation

  • Liu, Xuehua
  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Argente, Estefanía|||0000-0002-5431-3868
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] The recently presented software zeoGAsolver is discussed, which is based on genetic algorithms, with domain-dependent crossover and selection operators that maintain the size of the population in successive iterations while improving the average fitness. Using the density, cell parameters, and symmetry (or candidate symmetries) of a zeolite sample whose resolution can not be achieved by analysis of the XRD (X-ray diffraction) data, the software attempts to locate the coordinates of the T-atoms of the zeolite unit cell employing a function of fitness' (F), which is defined through the different contributions to the penalties' (P) as F = 1/(1 + P). While testing the software to find known zeolites such as LTA (zeolite A), AEI (SSZ-39), ITW (ITQ-12) and others, the algorithm has found not only most of the target zeolites but also seven new hypothetical zeolites whose feasibility is confirmed by energetic and structural criteria., G. S. thanks the Spanish government for the provision of the Severo Ochoa (SEV 2016-0683), CTQ2015-70126-R and MAT2015-71842-P projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis and structure determination via ultra-fast electron diffraction of the new microporous zeolitic germanosilicate ITQ-62

  • Bieseki, Lindiane
  • Simancas Coloma, Raquel
  • Bereciartua-Pérez, Pablo Javier
  • Simancas-Coloma, Jorge
  • Pergher, Sibele B.
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Here, we present the synthesis and structure determination of the new zeolite ITQ-62. Its structure was determined via ultra-fast electron diffraction tomography and refined using powder XRD data of the calcined material. This new zeolite contains a tridirectional channel system of highly distorted 8-rings, as well as a monodirectional 12-ring channel system., The authors gratefully acknowledge financial support from the Spanish Government (MAT2015-71842-P and MAT2015-71261-R MINECO/FEDER and Severo Ochoa SEV-2016-0683). The authors thank ALBA Light Source for beam allocation at the beamline MSPD, and specially thank the Electron Microscopy Service of the Universitat Politecnica de Valencia. Finally, the authors thank Dr Alejandro Vidal and Dr Teresa Blasco for helping in the NMR data discussion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ultrafast Electron Diffraction Tomography for Structure Determination of the New Zeolite ITQ-58

  • Simancas-Coloma, Jorge
  • Simancas Coloma, Raquel
  • Bereciartua-Pérez, Pablo Javier
  • Nicolopoulos ., Stavros
  • Das, Partha Pratim
  • Gemmi, Mauro
  • Mugnaioli, Enrico
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] In this work a new ultrafast data collection strategy for electron diffraction tomography is presented that allows reducing data acquisition tithe by one order of Magnitude.,,This Methodology minimizes the radiation damage of, beam-sensitive materials, such as microporous materials. This method, combined with the precession of the electron beam, provides high quality data enabling the determination of very complex structures. Most importantly,, the implementation of this new, electron diffraction methodology is, easily affordable in any modem electron Microscope. As a proof of concept, we have solved a new highly complex zeolitic structure named ITQ-58, with a very low symmetry (triclinic) and a large unit cell volume (1874.61(3)), containing 16 silicon and 32 oxygen atoms in its asymmetric unit, which would be very difficult to solve with the state of the art techniques., The authors gratefully acknowledge financial support of European Research Council (ERC-2014-AdG ref 671093 "MATching zeolite SYNthesis with CATalytic activity"), Spanish Government (MAT2015-71842-P (MINECO/FEDER), MAT2012-38567-C02-01 and Severo Ochoa SEV-2012-0267), and Generalitat Valenciana (Project Prometeo). E.M. was also supported by the Italian project FIR2013 Exploring the Nanoworld. Authors thank beamline MSPD at Spanish Synchrotron ALBA for beam time allocation. We acknowledge JEOL Japan, JEOL Europe, and specially Junichi Morimoto from JEOL Europe for the assistance during the specific alignments of the microscope. Finally, authors specially thank the Electron Microscopy Service of the Universitat Politecnica de Valencia and, in particular, Manuel J. Planes and Jose L. Moya for their invaluable support for setting up the EDT data acquisition. Original data (collected EDT frames and integrated intensities) can be requested directly from corresponding authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hydrothermal stability and catalytic performance of desilicated highly siliceous zeolites ZSM-5

  • Tarach, Karolina A.
  • Góra-Marek, Kinga
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Rey Garcia, Fernando|||0000-0003-3227-5669
Highly siliceous zeolites, namely MFI type have attracted the great attention due to their higher hydrothermal stability, higher selectivity to organic compounds, and often better catalytic properties in comparison with Al-rich zeolites. The native zeolite (Si/Al = 164) and its desilicated analogues were deeply characterized with regard to their structural and textural properties by X-ray diffraction, low temperature adsorption of nitrogen and solid-state Al-27 MAS NMR. Their acidic properties were evaluated in quantitative IR studies. Finally, the catalytic performance of desilicated zeolites ZSM-5 was evaluated in the cracking of n-decane, 1,3,5-tri-iso-propylbenzene and vacuum gas oil. In this article, it is shown that high silica zeolites prepared by NaOH and NaOH&TBAOH leaching presented good hydrothermal stability with only slightly lower resistance when comparing to native steamed zeolite. The mesoporosity was preserved after the steaming treatment. The influence of the generated mesoporosity on the higher activity was evidenced in both 1,3,5-tri-isopropylbenzene and diesel oil cracking of steamed hierarchical zeolites. In spite of their lowered acidity, the mesopores system benefited the diffusion of the bulky molecule and finally provided higher activity of hierarchical zeolites. (C) 2016 Elsevier Inc. All rights reserved., This work was financed by Grant No. 2015/18/E/ST4/00191 from the National Science Centre - Poland. F. Rey and J. Martinez-Triguero thank for the support of the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267), MAT2015-71842-P and CTQ2015-68951-C3-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of Short-Chain Alcohol and Alcohol-Water Adsorption in MEL and MFI Zeolites

  • Gomez-Alvarez, Paula
  • González -Noya, Eva
  • Lomba, E.
  • Pires, Joao
  • Valencia Valencia, Susana|||0000-0001-7160-2795
[EN] In this paper, we present a comparative study of the adsorption behavior of short chain alcohols (pure and in aqueous solution) into silicalite-1 (MFI-type zeolite) and silicalite-2 (MEL-type zeolite). For quite some time, silicalite-1 has been the reference material to address the problem of adsorptive-based separation, mostly for hydrocarbon mixtures. Interestingly, being structurally close to silicalite-1, adsorption studies using silicalite-2 are scarce and to the best of our knowledge, a comparative study of their behavior for alcohol water mixtures has not been published to date. We have here resorted to molecular simulation techniques to analyze the adsorption and diffusion phenomena in both zeolites at 25 and 50 degrees C for pure methanol, ethanol, 1-butanol, and water, and for some relevant compositions of alcohol/water mixtures. In addition to the dilute regime in the mixture, our study ranges from intermediate alcohol concentrations to alcohol-rich phases, relevant to alcohol purification processes. Besides, we have performed volumetric and calorimetric measurements of single-component adsorption of alcohols in pure silica MEL zeolite, which were used to validate the model potentials used in the simulations. We observe that the zigzag channels of MFI zeolite are most likely responsible for its somewhat higher affinity for alcohols. This leads to higher adsorption selectivities when compared to those of MEL zeolite. We have also found that the choice of water model strongly conditions water coadsorption into the zeolites and subsequently the predictions of the adsorbent's selectivity in alcohol/water systems. Despite considerable differences for adsorbed pure components, diffusivities of alcohol and water adsorbed from mixtures are relatively similar, as a consequence of the strong hydrogen bonds between hydroxyl groups and water., E.L. and E.G.N. acknowledge the support from the Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional (FEDER) under grants No. FIS2017-89361-C3-2-P and FIS2013-47350-05-4-R S.V. thanks J.A. Vidal-Moya for collecting the NMR data and acknowledges financial support from Spanish government (grants MAT2015-71842-P and SEV-2016-0683). J.P. thanks Fundacao para a Ciencia e a Tecnologia (FCT) for funding the project UID/MULTI/00612/2013 (C.QB.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Curative activity against citrus postharvest green mold of composite hydroxypropyl methylcellulose-beeswax edible coatings with zeolites containing Ag-nanoparticles

  • Palou, L.
  • Cerrillo, J. L.
  • Klangmuang, P.
  • Perez-Gago, M.B.
  • Taberner, V.
  • de la Fuente, B.
  • Sothornvit, R.
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Two types of commercial Na-zeolites, linde type A (LTA) and faujasite (FAU) were prepared with different percentage of silver that was incorporated by ion exchange using solutions of AgNO3. The physico-chemical properties of the samples were established using different techniques such as atomic emission spectroscopy with inductively coupled plasma (ICP-OES), X-ray diffraction (XRD), electronic microscopy (SEM and EDX), and temperature-programmed reduction (TPR). The curative activity of these materials was first evaluated as water dispersions in in vivo primary screenings by placing a drop (30 µL) in a rind wound of `Valencia¿ oranges that had been inoculated 24 h before with a conidial suspension of Penicillium digitatum. Selected Agzeolites were incorporated as antifungal ingredients at different concentrations into composite hydroxypropyl methylcellulose (HPMC)-beeswax (BW) edible emulsions prepared with 8% total solid content with stearic acid as emulsifier and glycerol as plasticizer. Depending on the experiment, these coatings were applied 24 h after fungal inoculation to `Valencia¿ oranges as drops in rind wounds or covering the entire fruit. Controls included inoculated but untreated fruit and inoculated fruit treated with HPMC-BW without Ag-zeolites. After incubation of treated fruit at 20°C for 7 days, coatings amended with Ag-zeolites reduced the incidence and severity of green mold by more than 80%, showing high potential for effective disease control. Curative activity depended on Ag concentration and FAU zeolites were more effective than LTA zeolites, probably because of their larger pore apertures and higher Si/Al ratio that favored silver diffusion. However, coatings with the highest silver content were phytotoxic causing dark blemishes on the fruit rind. Further work is needed to optimize non-phytotoxic coatings with the highest curative activity., Spanish MINECO and European FEDER programme are acknowledged for financial support (project MAT2015-71842-P). Severo Ochoa programme of MINECO is also acknowledged for the Ph.D. formation contract of J.L. Cerrillo (SVP-2014-068600). Fontestad S.A. (Montcada, Vale¿ncia) is acknowledged for providing fruit.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Solvent-Free Synthesis of ZIFs: A Route toward the Elusive Fe(II) Analogue of ZIF-8

  • Lopez-Cabrelles, J.
  • Romero, J.
  • ABELLÁN SÁEZ, GONZALO
  • Gimenez-Marques, M.
  • Minguez Espallargas, G.
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] Herein we report the synthesis of an elusive metal-organic framework, the iron(II) analogue of ZIF-8 with the formula Fe(2-methylimidazolate)(2), here denoted as MUV-3. The preparation of this highly interesting porous material, inaccessible by common synthetic procedures, occurs in a solvent-free reaction upon addition of an easily detachable template molecule, yielding single crystals of MUV-3. This methodology can be extended to other metals and imidazolate derivatives, allowing the preparation of ZIF-8, ZIF-67, and the unprecedented iron(II) ZIFs Fe(2-ethylimidazolate)(2) and Fe(2-methylbenzimidazolate)(2). The different performance of MUV-3 toward NO sorption, in comparison to ZIF-8, results from the chemisorption of NO molecules, which also causes a gate-opening behavior. Finally, the controlled pyrolysis of MUV-3 results in a N-doped graphitic nanocomposite that exhibits extraordinary performance for the oxygen evolution reaction (OER), with low overpotential at different current densities (316 mV at 10 mA cm(-2)), low Tafel slope (37 mV per decade), high maximum current density (710 mA cm(-2) at 2.0 V vs RHE), and great durability (15 h)., The work has been supported by the European Union (ERC-2016-CoG 724681-S-CAGE and ERC-2018-StG 804110-2D-PnictoChem) and the Spanish MINECO (Structures of Excellence Maria de Maeztu MDM-2015-0538 and Severo Ochoa SEV-2016-0683; projects CTQ2014-59209-P, CTQ2017-89528-P, and MAT2015-71842-P). G.M.E. and M.G.-M. thank the MICINN for "Ramon y Cajal" and "Juan de la Cierva - Incorporacion" fellowships, respectively. J.L.-C. acknowledges the Universitat de Valencia for an "Atraccio de Talent" grant. G.A. acknowledges support by the Generalitat Valenciana (CIDEGENT/2018/001) and the Deutsche Forschungsgemeinschaft (DFG; FLAG-ERA AB694/2-1). Dr. F. Hauke and Prof. A. Hirsch are acknowledged for their kind support with the Raman equipment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of post-synthetic modifications on the composition, acidity and textural properties of ZSM-22 zeolite

  • Del Campo Huertas, Pablo|||0000-0003-1955-193X
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Beato, P.
  • Navarro, María Teresa
  • Olsbye, Unni
  • Lillerud, K.P.
  • Svelle, S.
[EN] In this work, an extensive investigation of the preparation of a large body of desilicated ZSM-22 zeolites and their basic characterization is presented. We investigate the effects of the properties of the starting zeolite, and we employ mixtures of NaOH with CTAB or TBAOH as well as subsequent acid washings to create mesoporous zeolites. Scanning and transmission electron microscopy and nitrogen adsorption revealed that the cristal morphology of the starting zeolite appears to be the dominant parameter which influences the mesopore generation. Mesopores were effectively created within the rod-like commercial crystallites, whereas the thinner dimensions of the needle-shaped particles of the lab-made zeolite represent an obstacle for an intra-mesopore creation. The alkaline, surfactant-assisted or combined NaOH/TBAOH desilication methods resulted in mesopores with different shape and size from the commercial zeolite. The sequential acid washing generally resulted in increased micropore volume with respect to the desilicated samples. Elemental analysis showed that extra-framework Al species were generated upon the desilication treatments, which are eventually removed by the acid treatment. The acidity studied by FTIR demonstrated that this occurs without a marked modification of the Brønsted acidity, whereas the concentration of surface silanol hydroxyl groups is increased. The comparison between the total Al concentration and the amount of Al in acidic sites quantified by pyridine adsorption shows that the acidity was recovered after the acid washing and suggests that original non-acidic Al species in the starting materials may have a role in the formation of both Lewis and extra-framework species upon desilication., This publication is a part of the inGAP Centre of research-based Innovation, which receives financial support from the Norwegian Research Council under contract no. 174893. F.R and M.T.N thank to MINECO for financial support through projects MAT2015-71842-P and SEV-2012-0267. All the authors thank the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Síntesis y caracterización avanzada de materiales zeolíticos mediante el empleo de nuevos agentes orgánicos directores de estructura

  • Sala Gascón, Andrés
[ES] Las zeolitas han destacado por sus aplicaciones en procesos catalíticos y de adsorción/separación de gases de alto impacto industrial. Esto es debido a que presentan propiedades de tamiz molecular como consecuencia de sus estructuras microporosas y, además es posible ajustar sus propiedades catalíticas variando su composición química, presencia de defectos estructurales, tamaño promedio de cristal, etc. Hasta el momento se han reconocido 255 estructuras zeolíticas diferentes, pero la obtención de zeolitas con nuevas estructuras es un aspecto muy relevante dentro de la ciencia de materiales ya que permite ampliar el rango de aplicaciones de estos materiales. Por ello, el objetivo fundamental de esta tesis doctoral es la obtención de nuevos materiales zeolíticos, empleándose para ello, cationes orgánicos que actuarán como agentes directores de estructura (ADEs) en la cristalización de zeolitas. Así, se ha estudiado el empleo cationes derivados de biciclopirrolidina como ADEs sintetizados mediante reacciones orgánicas de cicloadición [3+2]. Estos ADEs han sido efectivos en la síntesis de zeolitas, obteniéndose diversos sólidos microporosos cuya preparación había sido descrita anteriormente con otros cationes orgánicos. Sin embargo, uno de los cationes empleados ha dado lugar a la cristalización de una nueva zeolita, denominada ITQ-69, que presenta un sistema tridireccional de canales rectos, de poro pequeño (8 x 8 x 8 R) y ausencia de cavidades. Este material ha sido efectivo en la separación selectiva de propileno de propano en su forma de germanosilicato. La síntesis de zeolitas quirales, es sin duda el objetivo más ambicioso propuesto. En esta tesis se ha explorado el empleo de derivados de azúcares como parte fundamental en la síntesis de ADEs. En concreto, se ha explorado la isomanida como unidad sintética quiral en la preparación de dicationes quirales. Cuando la isomanida se combina con la presencia de imidazolios (altamente selectivos hacía la estructura STW) se ha obtenido un material STW en forma de germanosilicato. Este sólido cristaliza formando cristales de tamaño suficientemente grande como para realizar estudios de difracción de Rayos X en monocristal, y determinar el exceso enantiomérico de distintas preparaciones. En todos los casos, se obtiene cristales S-STW homoquirales enantimórficamente puros, constituyendo el primer ejemplo de obtención selectiva quiral de una zeolita reportado hasta la fecha. En esta parte de la tesis, también se obtuvieron zeolitas con topología STW empleando ADEs no quirales. Algunos de estos sólidos, se evaluaron en la separación de hidrocarburos con diferentes grados de ramificación (zeolita STW puramente silícea) y en la reducción selectiva de NO con propano (zeolita Al-STW intercambiadas con Cu). Finalmente, se han estudiado diferentes cationes organofosforados como ADEs. La elevada estabilidad de estos cationes en el medio de síntesis, ha permitido la obtención de una nueva zeolita, ITQ-70, que presenta un elevado grado de defectos de conectividad y una muy baja densidad de red. La estructura de la zeolita ITQ-70 presenta un sistema de supercavidades con ventanas interconectadas de acceso a las mismas (20 x 20 x 18 R) y cristaliza con un grupo de simetría proquiral., [CA] Zeolites are well-known for their industrial applications. The presence of pores of molecular dimensions forming a structured channels system confers them the property of performing as a molecular sieve. This characteristic of zeolites, combined with the possibility of modifying their chemical composition, structural defects, average crystal size, etc., provides them with exceptional properties for catalytic and separation processes. Up to now, 255 different zeolitic structures have been compiled. However, obtaining zeolites with new structures remains an important challenge in materials science and broadening their applications. Therefore, the main objective of this doctoral thesis is the obtention of new zeolitic materials using organic cations as structure-directing agents (SDAs) in the crystallization process. Thus, the use of bicyclopyrrolidine-derived cations as ADEs, synthesized by organic cycloaddition reactions [3+2], has been studied. Several microporous solids whose preparation had been previously described using other organic cations have been obtained by utilizing these bicyclopyrrolidine-derived cations as ADEs. In addition, the crystallization of a new zeolite, ITQ-69, has been reached. This structure presents a tridirectional system of straight small pore size channels (8 x 8 x 8 R) and the absence of cavities. ITQ-69, in its germanosilicate form, has been proved to be significantly effective for the separation of propylene from propane. Obtaining chiral zeolite is undoubtedly one of the most ambitious objectives proposed in the field of zeolite synthesis. In this thesis, sugar derivatives have been specifically considered as starting molecules for the synthesis of chiral ADEs. Particularly, the synthesis of dicationic ADEs starting from isomannide as a chiral synthetic unit has been explored. When isomannide was combined with imidazole (highly selective towards the STW structure), a STW-structure material in the form of germanosilicate was obtained. This solid crystallizes forming sufficiently large crystals to perform single-crystal X-ray diffraction studies and determine the enantiomeric excess of different preparations. In all cases, enantiomorphically pure homochiral S-STW crystals are obtained, constituting the first reported example of chiral selective synthesis of a zeolite. Zeolites with STW structure were also obtained using non-chiral ADEs. The properties of these microporous solids were evaluated in the separation of hydrocarbons with different branching, in the form of purely siliceous STW, and in the selective reduction of NO with propane using Cu-exchanged Al-STW zeolites. Finally, different organophosphorus cations have been studied as ADEs. The high stability of these cations in the zeolites crystallization medium has allowed the isolation of a new zeolite, ITQ-70, which presents a high number of connectivity defects and a very low lattice density. The structure of the ITQ-70 zeolite possesses a super-cavity system with interconnected access windows (20 x 20 x 18) and crystallized with a prochiral symmetry group., [EN] Les zeolites han destacat per les seues aplicacions en processos catalítics i processos d'adsorció/separació de gasos d'alt impacte industrial. Açò és degut al fet que presenten propietats de tamís molecular a conseqüència de les seues estructures microporoses i, a més és possible ajustar les seues propietats catalítiques variant la seua composició química, presència de defectes estructutals, grandària del cristall, etc. Fins al moment es reconeixen 255 estructures zeolítiques diferents, però l'obtenció de zeolites amb noves estructures és un aspecte molt rellevant dins de la ciència de materials, ja que permet ampliar el rang d'aplicacions d'aquests materials. Per tant, l'aspecte fonamental d'aquesta tesi doctoral és l'obtenció de nous materials zeolítics empleant cations orgànics que actuaran com a agents directors d'estructura (ADEs) en la cristal·lització de zeolites. Així, s'ha explorat l'us de cations derivats de biciclopirrolidina com ADEs sintetitzats mitjançant reaccions orgàniques de cicloadició [3+2]. Aquests ADEs han sigut efectius en la síntesis de zeolites, obtenint-se diversos sòlids microporosos, la preparació dels quals havia sigut descrita anteriorment amb altres cations orgànics. No obstant, un dels cations empleats ha donat lloc a la cristal·lització d'una nova zeolita, denominada ITQ-69, que presenta un sistema tridireccional de canals rectes, porus xicotets (8 x 8 x 8 R) i absència de cavitats. Aquest material ha sigut efectiu en la separació selectiva de propilé de propà en la seua forma de germanosilicat. Dins de la síntesi de zeolites, la síntesi de zeolites quirals, és sens dubte un dels objectius més ambiciosos proposats. En aquesta tesi s'ha explorat l'ús de derivats de sucres com a part fonamental en la síntesi de ADEs. En concret, s'ha explorat la isomanida com a unitat sintètica quiral en la preparació de dications quirals. Quan la isomanida es combina amb la presència de imidazolios (altament selectius feia l'estructura STW) s'ha obtingut un material STW en forma de germanosilicato. Aquest sòlid cristal·litza formant cristalls de grandària prou gran com per a realitzar estudis de difracció de Raigs X en monocristall, i determinar l'excés enantioméric de diferents preparacions. En tots els casos, s'obté cristalls S-STW homoquirals enantimórficament purs, constituint el primer exemple d'obtenció selectiva quiral d'una zeolita reportat fins a la data. En aquesta part de la tesi, també es van obtindre zeolites amb topologia STW empleant ADEs no quirals. Alguns dels materials STW es van avaluar les propietats d'aquests sòlids microporosos en la separació d'hidrocarburs amb diferents graus de ramificació amb STW purament silici i en la reducció selectiva de NO amb propà empleant zeolites Al-STW intercanviades amb Cu. Finalment, s'han estudiat diferents cations organofosforats com ADEs. L'elevada estabilitat d'aquests cations en el mitjà de cristal·lització de zeolites ha permés aïllar una nova zeolita, ITQ-70, que presenta un elevat grau de defectes de connectivitat i una molt baixa densitat de xarxa. L'estructura de la zeolita ITQ-70 té un sistema compost per supercavitats amb finestres interconnectades d'accés a les mateixes (20 x 20 x 18) i cristal·litza amb un grup de simetria proquiral., Al Ministerio de Economía, Industria y Competitividad por concederme la Beca BES-2016-078684 que ha permitido la realización de esta tesis doctoral, junto a la ayuda económica proporcionada en los proyectos MAT2015-71842 y RTI2018-101784-B-100. A la Generalitat Valenciana su financiación a través del proyecto PROMETEO/2021/07 y por último a la Universidad Politécnica de Valencia (UPV), al Consejo Superior de Investigaciones Científicas (CSIC) y al Instituto de Tecnología Química (ITQ) por proporcionar las instalaciones y equipamiento necesarios para llevar a cabo el trabajo de investigación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Elucidation of the Interaction Mechanism between Organic Chiral Cages with Biomolecules through Nuclear Magnetic Resonance and Theoretical Studies

  • Saez-Ferre, Sara
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] A multinuclear NMR has been carried out to elucidate the mechanism of action of CC3-R box-type chiral materials for the separation of enantiomers, supported by theoretical calculations. The potential of these materials to be used as chiral resolution agents through NMR is evidence in this study., Program Severo Ochoa SEV-2016-0683 is gratefully acknowledged. S.S-F. thanks MEC for his Severo Ochoa Grant SPV-2013-067884, P.O.-B. thanks MEC for his Ramon y Cajal contract RYC-2014-16620. M.B. and F.R. thank the financial support by the Spanish Government (MAT2017-82288-C2-1-P and MAT2015-71842-P). The authors thank the MULTY2-HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An INS study of entrapped organic cations within the micropores of zeolite RTH

  • Lemishko, Tetiana
  • Simancas-Coloma, Jorge
  • Hernández Rodríguez, Manuel
  • Jiménez-Ruiz, Mónica
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] Two different organic cations (structure directing agents, SDAs) have been selected because of their ability to drive the synthesis of zeolites towards the same microporous material, RUB-13 (RTH), both being organophosphorous compounds. These P containing structure directing agents are characterized by a high concentration of positive charge on the phosphorus atom. Then, in the presence of fluoride anions used in these syntheses, a strong P+ center dot center dot center dot F- electrostatic contribution competes with the van der Waals short range SDA . . . zeolite interaction that drives the zeolite formation. The rotation of the methyl groups present in the SDA is expected to be nearly free if van der Waals interactions dominate, but they will be hindered if the Coulombic P+ center dot center dot center dot F- term forces a closer approach to the SDA towards the zeolite framework. SDAs can be designed a priori to tune which interactions dominate. The rotational mobility of the SDAs, as well as certain related bending modes, has been well tackled by inelastic neutron scattering (INS) in order to test this hypothesis. The INS results provide valuable information for the design of specific SDAs for the synthesis of zeolites., Ministerio de Economia y Competitividad of Spain is thanked for the provision of funding through the excellence programme 'Sever Ochoa' (SEV-2012-0267) and MAT2015-71842-P. Generalitat Valenciana is acknowledged for funding through the PROMETEO program (PROMETEOII/2013/011). All authors thank ILL for neutron beam-time allocation (experiment 7-04-129) and ILL C-Lab for simulation support. GS thanks Centro Tecnico de Informatica (CTI-CSIC) for the use of computational facilities. GS and TL thank ILL for the provision of the contract SRH/GRI/AS-15/222 ("Inelastic Neutron Scattering study of zeolite acidity") and the PhD contract. Prof. Javier Campo is acknowledged for helpful suggestions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of nano-SSZ-13 and its application in the reaction of methanol to olefins

  • Li, Zhibin
  • Yu, Jihong
  • Navarro Villalba, Mª Teresa|||0000-0001-5012-8414
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Nanosized SSZ-13 has been obtained from a one-pot synthesis procedure with the addition of CTAB to the synthesis precursor solution. Nano-SSZ-13 zeolite showed high intracrystalline mesoporosity and compared to standard SSZ-13 presented a much longer lifetime and higher conversion capacity for the reaction of methanol to olefins. The improved properties were attributed to a more efficient utilization of micropores by easier diffusion of reactants and products and slower deactivation by coke. A higher C2/C3 ratio was found for nano-SSZ-13, pointing to a lower deactivation of the aromatics cycle of the hydrocarbon pool., Financial support by the Spanish Government-MINECO through “Severo Ochoa” (SEV 2012-0267), CTQ2015-67592-P, CTQ2015-70126-R, CTQ2015-68951-C3-1-R, MAT2015-71842-P, by the European Union ERC-AdG-2014-671093-SynCatMatch and by the Generalitat Valenciana PROMETEOII/2013/011 is acknowledged. Z. Li acknowledges China Scholarship Council (CSC) for a fellowship. J. Yu thanks the Major International Joint Research Project of China for financial support (Grant No. 21320102001).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Critical Role of Dynamic Flexibility in Ge-Containing Zeolites: Impact on Diffusion

  • Gutierrez-Sevillano, Juan José
  • Calero, Sofia
  • Hamad, Said
  • Grau-Crespo, Ricardo
  • Balestra, Salvador R. G.
  • Ruiz-Salvador, A. Rabdel
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Palomino Roca, Miguel|||0000-0003-2983-1038
Incorporation of germanium in zeolites is well known to confer static flexibility to their framework, by stabilizing the formation of small rings. In this work, we show that the flexibility associated to Ge atoms in zeolites goes beyond this static effect, manifesting also a clear dynamic nature, in the sense that it leads to enhanced molecular diffusion. Our study combines experimental and theoretical methods providing evidence for this effect, which has not been described previously, as well as a rationalization for it, based on atomistic grounds. We have used both pure-silica and silico-germanate ITQ-29 (LTA topology) zeolites as a case study. Based on our simulations, we identify the flexibility associated to the pore breathing-like behavior induced by the Ge atoms, as the key factor leading to the enhanced diffusion observed experimentally in Ge-containing zeolites., We thank the contribution from the European Research Council through an ERC Starting Grant (ERC2011-StG-279520-RASPA), the MINECO (CTQ2013-48396-P), the Andalucia Region (FQM-1851) and the Royal Society (International Exchange Scheme grant REA004). We thank Centro Informatico Cientifico de Andalucia (CICA) for providing computing resources. M.P., F.R. and S.V. thank the financial support by the Spanish Government (MAT2015-71842-P, Consolider Ingenio 2010-Multicat CSD-2009-00050 and Severo Ochoa SEV-2012-0267).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Functional Ag-Exchanged Zeolites as Biocide Agents

  • Cerrillo, José Luis
  • Pérez-Gago, María B.
  • Villamón-Pérez, Diana
  • Palou-Valls, Lluis
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Valencia Valencia, Susana|||0000-0001-7160-2795
[EN] Materials based on silver are used for controlling different pathogenic microorganisms. However, the influence of the silver carrier in the biocidal activity of the material has been scarcely reported. The present research is focused on studying the influence of zeolite properties on the biocidal activity of silver-exchanged zeolites, acting as reservoirs of silver species. The biocidal action of Ag-Faujasite (Ag-FAU) and Ag-Linde Type A (Ag-LTA) zeolites, containing different silver contents, is studied against different types of bacteria and fungi. Importantly, zeolite structure is found to be a significant parameter for controlling the antibacterial activity of Ag-exchanged zeolites. The results show that Ag-FAU presents a higher activity than Ag-LTA, because the topology of FAU combined with its highest Si/Al ratio favors the formation and release of silver species with important biocidal activity. Some insights on the bactericidal mechanism of Ag-zeolites are envisaged by means of high resolution transmission electron microscopy, showing the multi-targeted biocidal action of Ag species released from zeolites. Besides, it is shown that Ag-zeolites are more active against bacteria than fungi. Antifungal activity is highly dependent on the fungi species and the structure of the zeolite is not as determinant as it is for the antibacterial activity., The authors thank the Spanish Ministry of Economy and Competitiveness through MAT-2015-71842-P and SEV-2016-0683 for the financial support and J.L. Cerrillo wish to thank Spanish Ministry of Economy and Competitiveness for the Severo Ochoa PhD fellowship (SVP-2014-068600).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Femto-to nanosecond photodynamics of Nile Red in metal-ion exchanged faujasites

  • di Nunzio, Maria Rosaria
  • Caballero-Mancebo, Elena
  • Martin, Cristina
  • Cohen, Boiko
  • Douhal, Abderrazzak
  • Navarro Villalba, Mª Teresa|||0000-0001-5012-8414
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] We report on the photodynamics of Nile Red (NR) interacting with faujasite (NaY)-type zeolites having different Na/Al ratios and charge balancing metals (Li+, Mg2+, and Cs+) in dichloromethane (DCM) suspensions. The encapsulation of NR in these materials leads to the formation of different populations, reflected in H- and J-aggregates, monomers, and surface adsorbed species. Due to the interaction of the dye with both the Bronsted and Lewis sites of the zeolite, a bathochromic shift is observed in the steady-state diffuse transmittance and emission spectra. The relative contribution of each population is affected by the Na/Al ratio and the nature of the doping metal ion. These findings are further explored by femtoto nanosecond time-resolved emission experiments, where a multi-exponential behaviour is observed for the excited samples. The fluorescence lifetimes range from similar to 100 ps to similar to 2 ns. They are assigned to the emission from H- and J-aggregates and monomers. At low Na/Al ratios, we observed an increase in the fluorescence time constants which is explained in terms of H-bonds formation between NR and the zeolite framework, while the change in the emission lifetimes for the metal ion exchanged zeolites is due to the variation of the properties (size and polarization ability) of the exchanged cation. An ultrafast formation (similar to 200 fs) of a charge-separated state (CS) followed by a vibrational cooling (similar to 1-2 ps) are observed in the fluorescence up-conversion transients. These results indicate a strong interaction between NR and the studied zeolites and may help for the design of metal ion sensors and for a better understanding of nanocatalysis. (C) 2017 Elsevier Inc. All rights reserved., This work was supported by the JCCM and MINECO through projects: PEII-2014-003-P, Consolider Ingenio 2010 (CSD2009-0050, MULTICAT), and MAT2014-57646-P. A. Corma and M.T. Navarro thank the MINECO (Severo Ochoa program SEV-2012-0267 and MAT2015-71842-P) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An Ultrahigh CO2-Loaded Silicalite-1 Zeolite: Structural Stability and Physical Properties at High Pressures and Temperatures

  • Marqueno, Tomas
  • Santamaria-Perez, David
  • Ruiz-Fuertes, Javier
  • Chulia-Jordan, Raquel
  • McGuire, Chris
  • Kavner, Abby
  • MacLeod, Simon
  • Daisenberger, Dominik
  • Popescu, Catalin
  • Rodríguez-Hernández, Plácida
  • Munoz, Alfonso
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] We report the formation of an ultrahigh CO2-loaded pure-SiO2, silicalite-1 structure at high pressure (0.7 GPa) from the interaction of empty zeolite and fluid CO, medium. The CO2-filled structure was characterized in situ by means of synchrotron powder X-ray diffraction. Rietveld refinements and Fourier recycling allowed the location of 16 guest carbon dioxide molecules per unit cell within the straight and sinusoidal channels of the porous framework to be analyzed. The complete filling of pores by CO, molecules favors structural stability under compression, avoiding pressure-induced amorphization below 20 GPa, and significantly reduces the compressibility of the system compared to that of the parental empty one. The structure of CO2-loaded silicalite-1 was also monitored at high pressures and temperatures, and its thermal expansivity was estimated., The authors thank the Spanish Ministerio de Economia y Competitividad (MINECO), the Spanish Research Agency (AEI), and the European Fund for Regional Development (FEDER) for their financial support (MAT2016-75586-C4-1-P, MAT2016-75586-C4-3-P, MAT2015-71842-P; Severo Ochoa SEV-2012-0267; and MAT2015-71070-REDC (MALTA Consolider)). D.S.-P. and J.R-F. acknowledge MINECO for a Ramon y Cajal (RyC-2014-15643) and a Juan de la Cierva (IJCI-2014-20513) contract, respectively. A.K. acknowledges the support of the University of Valencia through the Grant UV-INV-EPC17-548561. Portions of this work were performed at GeoSoilEnviroCARS (Sector 13), Advanced Photon Source (APS), and Argonne National Laboratory. GeoSoilEnviroCARS is supported by the National Science Foundation, Earth Sciences (EAR-1128799), and the Department of Energy, GeoSciences (DE-FG02-94ER14466). This research used resources from the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory (DE-AC02-06CH11357). Use of the COMPRES-GSECARS gas loading system was supported by COMPRES under NSF Cooperative Agreement EAR 11-57758. CO2 gas was also loaded at Diamond Light Source. The authors thank the synchrotron facility ALBA-CELLS for beamtime allocation at MSPD line.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Arsenolite: a quasi-hydrostatic solid pressure transmitting medium

  • Sans-Tresserras, Juan Ángel
  • Manjón, F. J.
  • Popescu, C.
  • Muñoz, A.
  • Rodríguez-Hernández, P.
  • Jordá, J. L.
  • Rey Garcia, Fernando|||0000-0003-3227-5669
This study reports the experimental characterization of the hydrostatic properties of arsenolite (As4O6), a molecular solid which is one of the softest minerals in the absence of hydrogen bonding. The high compressibility of arsenolite and its stability up to 15GPa have been proved by x-ray diffraction measurements, and the progressive loss of hydrostaticity with increasing pressure up to 20GPa has been monitored by ruby photoluminescence. Arsenolite has been found to exhibit hydrostatic behavior up to 2.5GPa and a quasi-hydrostatic behavior up to 10GPa at room temperature. This result opens the way to explore other molecular solids as possible quasi-hydrostatic pressure-transmitting media. The validity of arsenolite as an insulating, stable, non-penetrating and quasi-hydrostatic medium is explored by the study of the x-ray diffraction of zeolite ITQ-29 at high pressure., This work has been performed with financial support from Spanish MINECO under projects MAT2013-46649-C4-2/3-P and MAT2015-71070-REDC. JAS acknowledges the 'Ramon y Cajal' fellowship program for financial support. We also thank D Calatayud, J J Garcia, T M Godoy, A Zapata, and A Cuenca for fruitful discussions. The authors thank ALBA light source for beam allocation at beamline MSPD. JLJ and FR acknowledge financial support through the SEV-2012-0267, Consolider Ingenio 2010-Multicat (CSD-2009-0050) and MAT2015-71842-P (MINECO/FEDER) projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural Evolution of CO2-Filled Pure Silica LTA Zeolite under High-Pressure High-Temperature Conditions

  • Santamaria-Perez, David
  • Marqueño, Tomás
  • MacLeod, Simon
  • Ruiz-Fuertes, Javier
  • Daisenberger, Dominik
  • Chulia-Jordan, Raquel
  • Errandonea, Daniel
  • McGuire, Chris
  • Mahkluf, Adam
  • Kavner, Abby
  • Popescu, Catalin
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The crystal structure of CO2-filled pure-SiO2 LTA zeolite has been studied at high pressures and temperatures using synchrotron-based X-ray powder diffraction. Its structure consists of 13 CO2 guest molecules, 12 of them accommodated in the large alpha-cages and one in the beta-cages, giving a SiO2/CO2 stoichiometric ratio smaller than 2. The structure remains stable under pressure up to 20 GPa with a slight pressure-dependent rhombohedral distortion, indicating that pressure-induced amorphization is prevented by the insertion of guest species in this open framework. The ambient temperature lattice compressibility has been determined. In situ high-pressure resistive-heating experiments up to 750 K allow us to estimate the thermal expansivity at P approximate to 5 GPa. Our data confirm that the insertion of CO2 reverses the negative thermal expansion of the empty zeolite structure. No evidence of any chemical reaction was observed. The possibility of synthesizing a silicon carbonate at high temperatures and higher pressures is discussed in terms of the evolution of C-O and Si-O distances between molecular and framework atoms., The authors thank the financial support of the Spanish Ministerio de Economia y Competitividad (MINECO), the Spanish Research Agency (AEI), and the European Fund for Regional Development (FEDER) under Grant Nos. MAT2016-75586-C4-1-P, MAT2015-71842-P, Severo Ochoa SEV-2012-0267, and No.MAT2015-71070-REDC (MALTA Consolider). D.S.-P. and J.R.-F. acknowledge MINECO for a Ramon y Cajal and a Juan de la Cierva contract, respectively. Portions of this work were performed at GeoSoilEnviroCARS (Sector 13), Advanced Photon Source (APS), Argonne National Laboratory. GeoSoilEnviroCARS is supported by the National Science Foundation - Earth Sciences (EAR-1128799) and Department of Energy- GeoSciences (DE-FG02-94ER14466). This research used resources of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. Use of the COMPRES-GSECARS gas loading system was supported by COMPRES under NSF Cooperative Agreement EAR 11-57758. CO<INF>2</INF> gas was also loaded at Diamond Light Source. Authors thank synchrotron ALBA-CELLS for beamtime allocation at MSPD line. British Crown Owned Copyright 2017/AWE. Published with permission of the Controller of Her Britannic Majesty's Stationery Office.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of the synthesis method on the catalytic activity of mayenite for the oxidation of gas-phase trichloroethylene

  • Intiso, Adriano
  • Cucciniello, Raffaele
  • Rossi, Federico
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Catalytic oxidation of trichloroethylene (TCE) in heterogeneous phase (gas-solid) is an effective strategy for the conversion of this pollutant in less harmful compounds, namely CO2, CO and HCl. In this work, we have studied the use of mayenite, a cost-effective material, as an active catalyst for the TCE conversion. In particular, we have assessed the influence of the mayenite synthesis method (hydrothermal, sol-gel and ceramic) on the reaction performance. The materials have been characterized by different techniques, such as XRD, N-2-sorption (BET), TPR, Raman spectroscopy, FESEM-EDX and TEM. The analysis of the light-off curves and product distribution, has shown that the use of the hydrothermal method for the mayenite synthesis results in the most active and selective catalyst. This has been related with a higher surface area and with a higher concentration of oxygen anions in the mayenite prepared by this method. It has been found that the presence of water in the stream do not influence the catalytic performance of the material. A mechanism for the reaction and for the partial deactivation of the catalyst has been proposed., This work was supported by the grants ORSA167988 and ORSA174250 funded by the University of Salerno. AI gratefully acknowledges the Erasmus+ traineeship program. AEP and JMT thanks the Spanish Ministry of Economy and Competitiveness and the Fondo Europeo de Desarrollo Regional through MAT2015-71842-P and CTQ2015-68951-C3-1-R (MINECO/FEDER)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Control of zeolite framework flexibility and pore topology for separation of ethane and ethylene

  • Bereciartua-Pérez, Pablo Javier
  • Corcoran Jr., Edward W.
  • Kortunov, Pavel
  • Ravikovitch, Peter I.
  • Burton, Allen
  • Yoon, Chris
  • Wang, Yu
  • Paur, Charanjit
  • Guzman, Javier
  • Bishop, Adeana R.
  • Casty, Gary L.
  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Valencia Valencia, Susana|||0000-0001-7160-2795
[EN] The discovery of new materials for separating ethylene from ethane by adsorption, instead of using cryogenic distillation, is a key milestone for molecular separations because of the multiple and widely extended uses of these molecules in industry. This technique has the potential to provide tremendous energy savings when compared with the currently used cryogenic distillation process for ethylene produced through steam cracking. Here we describe the synthesis and structural determination of a flexible pure silica zeolite (ITQ-55). This material can kinetically separate ethylene from ethane with an unprecedented selectivity of ~100, owing to its distinctive pore topology with large heart-shaped cages and framework flexibility. Control of such properties extends the boundaries for applicability of zeolites to challenging separations., We gratefully acknowledge financial support from ExxonMobil Research and Engineering Company, Instituto de Tecnologia Quimica researchers also thank the European Research Council (grant ERC-2014-AdG-671093 "MATching zeolite SYNthiesis with CATalytic activity") and the Spanish government (grants MAT2015-71842-P MINECO/FEDER and Severe Ochea SEV-2012-0267 and SEV-2016-0683) for economic support
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis of nano-SSZ-13 and its application in the reaction of methanol to olefins

  • Li, Zhibin
  • Navarro, María Teresa
  • Martínez Triguero, Joaquín
  • Yu, Jihong
  • Corma, Avelino
Nanosized SSZ-13 has been obtained from a one-pot synthesis procedure with the addition of CTAB to the synthesis precursor solution. Nano-SSZ-13 zeolite showed high intracrystalline mesoporosity and compared to standard SSZ-13 presented a much longer lifetime and higher conversion capacity for the reaction of methanol to olefins. The improved properties were attributed to a more efficient utilization of micropores by easier diffusion of reactants and products and slower deactivation by coke. A higher C2/C3 ratio was found for nano-SSZ-13, pointing to a lower deactivation of the aromatics cycle of the hydrocarbon pool., Financial support by the Spanish Government-MINECO through “Severo Ochoa” (SEV 2012-0267), CTQ2015-67592-P, CTQ2015-70126-R, CTQ2015-68951-C3-1-R, MAT2015-71842-P, by the European Union ERC-AdG-2014-671093-SynCatMatch and by the Generalitat Valenciana PROMETEOII/2013/011 is acknowledged. Z. Li acknowledges China Scholarship Council (CSC) for a fellowship. J. Yu thanks the Major International Joint Research Project of China for financial support (Grant No. 21320102001)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrafast electron diffraction tomography for structure determination of the new zeolite ITQ-58

  • Simancas, Jorge
  • Simancas, Raquel
  • Bereciartua, Pablo Javier
  • Jordá Moret, José Luis
  • Rey García, Fernando
  • Corma, Avelino
  • Nicolopoulos, Stavros
  • Pratim Das, Partha
  • Gemmi, Mauro
  • Mugnaioli, Enrico
In this work a new ultrafast data collection strategy for electron diffraction tomography is presented that allows reducing data acquisition time by one order of magnitude. This methodology minimizes the radiation damage of beam-sensitive materials, such as microporous materials. This method, combined with the precession of the electron beam, provides high quality data enabling the determination of very complex structures. Most importantly, the implementation of this new electron diffraction methodology is easily affordable in any modern electron microscope. As a proof of concept, we have solved a new highly complex zeolitic structure named ITQ-58, with a very low symmetry (triclinic) and a large unit cell volume (1874.6 Å), containing 16 silicon and 32 oxygen atoms in its asymmetric unit, which would be very difficult to solve with the state of the art techniques., The authors gratefully acknowledge financial support of European Research Council (ERC-2014-AdG ref 671093 “MATching zeolite SYNthesis with CATalytic activity”), Spanish Government (MAT2015-71842-P (MINECO/FEDER), MAT2012-38567-C02-01 and Severo Ochoa SEV-2012-0267), and Generalitat Valenciana (Project Prometeo). E.M. was also supported by the Italian project FIR2013 Exploring the Nanoworld., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gas confinement in compartmentalized coordination polymers for highly selective sorption

  • Giménez-Marqués, Mónica
  • Calvo Galve, Néstor
  • Palomino, Miguel
  • Valencia, Susana
  • Rey García, Fernando
  • Sastre, Germán
  • Vitórica-Yrezábal, Iñigo J.
  • Jiménez-Ruiz, M.
  • Rodríguez-Velamazán, J. A.
  • González, Miguel A.
  • Jordá Moret, José Luis
  • Coronado, Eugenio
  • Mínguez Espallargas, Guillermo
Discrimination between different gases is an essential aspect for industrial and environmental applications involving sensing and separation. Several classes of porous materials have been used in this context, including zeolites and more recently MOFs. However, to reach high selectivities for the separation of gas mixtures is a challenging task that often requires the understanding of the specific interactions established between the porous framework and the gases. Here we propose an approach to obtain an enhanced selectivity based on the use of compartmentalized coordination polymers, named CCP-1 and CCP-2, which are crystalline materials comprising isolated discrete cavities. These compartmentalized materials are excellent candidates for the selective separation of CO2 from methane and nitrogen. A complete understanding of the sorption process is accomplished with the use of complementary experimental techniques including X-ray diffraction, adsorption studies, inelastic- and quasi-elastic neutron scattering, magnetic measurements and molecular dynamics calculations., Financial support from the Spanish MINECO (CTQ2014-59209-P, MAT2014-56143-R and MAT2015-71842-P), the Generalitat Valenciana (Prometeo and ISIC-Nano programs), the EU (ERC2016-CoG 724681-S-CAGE) and the VLC/Campus Program is gratefully acknowledged. We thank the Spanish government for the provision of a Severo Ochoa project (SEV-2012-0267) and a Maria de Maeztu project (MDM-2015-0538). M. G.-M. thanks MICINN for a predoctoral FPU grant and the EU for a Marie Sklodowska-Curie postdoctoral fellowship (H2020-MSCA-IF-EF658224). N. C. G. thanks the Generalitat Valenciana for a VALi+d predoctoral fellowship. J. A. R.-V. acknowledges CSIC for a JAEdoc contract. G. S. thanks SGAI-CSIC for computing time. G. M. E. acknowledges the Blaise Pascal International Chair for financial support and the Ramon y Cajal Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of the synthesis method on the catalytic activity of mayenite for the oxidation of gas-phase trichloroethylene

  • Intiso, A.
  • Martínez Triguero, Joaquín
  • Cucciniello, R.
  • Rossi, F.
  • Palomares Gimeno, Antonio Eduardo
Catalytic oxidation of trichloroethylene (TCE) in heterogeneous phase (gas-solid) is an effective strategy for the conversion of this pollutant in less harmful compounds, namely CO, CO and HCl. In this work, we have studied the use of mayenite, a cost-effective material, as an active catalyst for the TCE conversion. In particular, we have assessed the influence of the mayenite synthesis method (hydrothermal, sol-gel and ceramic) on the reaction performance. The materials have been characterized by different techniques, such as XRD, N-sorption (BET), TPR, Raman spectroscopy, FESEM-EDX and TEM. The analysis of the light-off curves and product distribution, has shown that the use of the hydrothermal method for the mayenite synthesis results in the most active and selective catalyst. This has been related with a higher surface area and with a higher concentration of oxygen anions in the mayenite prepared by this method. It has been found that the presence of water in the stream do not influence the catalytic performance of the material. A mechanism for the reaction and for the partial deactivation of the catalyst has been proposed., Tis work was supported by the grants ORSA167988 and ORSA174250 funded by the University of Salerno. AI gratefully acknowledges the Erasmus+ traineeship program. AEP and JMT thanks the Spanish Ministry of Economy and Competitiveness and the Fondo Europeo de Desarrollo Regional through MAT2015-71842-P and CTQ2015-68951-C3-1-R (MINECO/FEDER).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dynamic Studies on Kinetic H2/D2 Quantum Sieving in a Narrow Pore Metal–Organic Framework Grown on a Sensor Chip

  • Paschke, B.
  • Denysenko, D.
  • Bredenkötter, B.
  • Sastre, Germán
  • Wixforth, A.
  • Volkmer, D.
The separation of deuterium from hydrogen still remains a challenging and industrially relevant task. Compared to traditional cryogenic methods for separation, based on different boiling points of H and D, the use of ultramicroporous materials offers a more efficient alternative method. Due to their rigid structures, permanently high porosity, tunable pore sizes and adjustable internal surface properties, metal–organic frameworks (MOFs), a class of porous materials built through the coordination between organic linkers and metal ions/clusters, are more suitable for this approach than zeolites or carbon-based materials. Herein, dynamic gas flow studies on H/D quantum sieving in MFU-4, a metal-organic framework with ultra-narrow pores of 2.5 Å, are presented. A specially designed sensor with a very fast response based on surface acoustic waves is used. On-chip measurements of diffusion rates in the temperature range 27–207 K reveal a quantum sieving effect, with D diffusing faster than H below 64 K and the opposite selectivity above this temperature. The experimental results obtained are confirmed by molecular dynamic simulation regarding quantum sieving of H and D on MOFs for which a flexible framework approach was used for the first time., D.V. and A.W. are grateful for financial support by DFG: priority program 1928 “Coordination Networks: Building Blocks for Functional Systems”. This work was supported in part by the Cluster of Excellence NIM (Nanosystems Initiative Munich) of the German Government. B.P. gratefully acknowledges financial support by the Bavarian Science Foundation. G.S. thanks MINECO of Spain for funding (SEV‐2016‐0683 and MAT2015‐71842‐P) and ASIC‐UPV for the use of computational facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Zeolites and Other Adsorbents

  • Perez-Botella, Eduardo
  • Palomino, Miguel
  • Valencia, Susana
  • Rey García, Fernando
The authors thank the Spanish Ministry of Economy, Industry and Competitiveness for its funding by means of the projects (MAT2015-71842-P MINECO/FEDER and Severo Ochoa SEV-2016-0683). EPB acknowledges the Spanish Ministry of Education, Culture and Sport for the FPU grant FPU15/01602.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Curative activity against citrus postharvest green mold of composite hydroxypropyl methylcellulose-beeswax edible coatings with zeolites containing Ag-nanoparticles

  • Palou, L.
  • Cerrillo, J.L.
  • Klangmuang, P.
  • Pérez-Gago, María B.
  • Taberner, V.
  • de la Fuente, B.
  • Sothornvit, R.
  • Rey García, Fernando
  • Valencia, Susana
  • Palomares Gimeno, Antonio Eduardo
Spanish MINECO and European FEDER programme are acknowledged for financial support (project MAT2015-71842-P). Severo Ochoa programme of MINECO is also acknowledged for the Ph.D. formation contract of J.L. Cerrillo (SVP-2014-068600). Fontestad S.A. (Montcada, València) is acknowledged for providing fruit.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Study of Short-Chain Alcohol and Alcohol–Water Adsorption in MEL and MFI Zeolites

  • Gómez-Álvarez, Paula
  • Noya, Eva G.
  • Lomba, Enrique
  • Valencia, Susana
  • Pires, João
12 pages, 9 figures, 2 tables, In this paper, we present a comparative study of the adsorption behavior of short chain alcohols (pure and in aqueous solution) into silicalite-1 (MFI-type zeolite) and silicalite-2 (MEL-type zeolite). For quite some time, silicalite-1 has been the reference material to address the problem of adsorptive-based separation, mostly for hydrocarbon mixtures. Interestingly, being structurally close to silicalite-1, adsorption studies using silicalite-2 are scarce and to the best of our knowledge, a comparative study of their behavior for alcohol−water mixtures has not been published to date. We have here resorted to molecular simulation techniques to analyze the adsorption and diffusion phenomena in both zeolites at 25 and 50 °C for pure methanol, ethanol, 1-butanol, and water, and for some relevant compositions of alcohol/water mixtures. In addition to the dilute regime in the mixture, our study ranges from intermediate alcohol concentrations to alcohol-rich phases, relevant to alcohol purification processes. Besides, we have performed volumetric and calorimetric measurements of single-component adsorption of alcohols in pure silica MEL zeolite, which were used to validate the model potentials used in the simulations. We observe that the zigzag channels of MFI zeolite are most likely responsible for its somewhat higher affinity for alcohols. This leads to higher adsorption selectivities when compared to those of MEL zeolite. We have also found that the choice of water model strongly conditions water coadsorption into the zeolites and subsequently the predictions of the adsorbent’s selectivity in alcohol/water systems. Despite considerable differences for adsorbed pure components, diffusivities of alcohol and water adsorbed from mixtures are relatively similar, as a consequence of the strong hydrogen bonds between hydroxyl groups and water., E.L. and E.G.N. acknowledge the support from the Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER) under grants No. FIS2017-89361-C3-2-P and FIS2013-47350-C5-4-R. S.V. thanks J.A. Vidal-Moya for collecting the NMR data and acknowledges financial support from Spanish government (grants MAT2015-71842-P and SEV-2016-0683). J.P. thanks Fundação para a Ciência e a Tecnologia (FCT) for funding the project UID/MULTI/ 00612/2013 (C.Q.B.)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Gas confinement in compartmentalized coordination polymers for highly selective sorption

  • Giménez-Marqués, M.
  • Calvo Galve, N.
  • Palomino, M.
  • Valencia, S.
  • Rey, F.
  • Sastre, G.
  • Vitórica-Yrezábal, I. J.
  • Jiménez-Ruiz, M.
  • Rodríguez-Velamazán, J. A.
  • González, M. A.
  • Jordá, J. L.
  • Coronado, E.
  • Espallargas, G. M.
Discrimination between different gases is an essential aspect for industrial and environmental applications involving sensing and separation. Several classes of porous materials have been used in this context, including zeolites and more recently MOFs. However, to reach high selectivities for the separation of gas mixtures is a challenging task that often requires the understanding of the specific interactions established between the porous framework and the gases. Here we propose an approach to obtain an enhanced selectivity based on the use of compartmentalized coordination polymers, named CCP-1 and CCP-2, which are crystalline materials comprising isolated discrete cavities. These compartmentalized materials are excellent candidates for the selective separation of CO2 from methane and nitrogen. A complete understanding of the sorption process is accomplished with the use of complementary experimental techniques including X-ray diffraction, adsorption studies, inelastic- and quasi-elastic neutron scattering, magnetic measurements and molecular dynamics calculations.