Skip to main content

DISEÑO MULTIESCALA DE PROCESOS DE CAPTURA Y UTILIZACION DE DIOXIDO DE CARBONO

CTQ2016-76231-C2-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE CANTABRIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Estimating CO2/N2 Permselectivity through Si/Al = 5 Small-Pore Zeolites/PTMSP Mixed Matrix Membranes: Influence of Temperature and Topology

  • Casado, Clara
  • Fernández-Barquín, Ana
  • Irabien, Ángel
  • Valencia Valencia, Susana|||0000-0001-7160-2795
[EN] In the present work, the effect of zeolite type and topology on CO2 and N-2 permeability using zeolites of different topology (CHA, RHO, and LTA) in the same Si/Al = 5, embedded in poly(trimethylsilyl-1-propyne) (PTMSP) is evaluated with temperature. Several models are compared on the prediction of CO2/N-2 separation performance and then the modified Maxwell models are selected. The CO2 and N-2 permeabilities through these membranes are predicted with an average absolute relative error (AARE) lower than 0.6% taking into account the temperature and zeolite loading and topology on non-idealities such as membrane rigidification, zeolite-polymer compatibility and sieve pore blockage. The evolution of this structure-performance relationship with temperature has also been predicted., This research was funded by Spanish MINECO-General Secretariat for Research, Development and Innovation under project CTQ2016-76231-C2-1-R at the University of Cantabria, and MAT2015-71842-P, at the Instituto de Tecnologia Quimica.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Catalyst Coated Membrane Electrodes for the gas phase CO2 electroreduction to formate

  • Díaz-Sainz, Guillermo
  • Alvarez-Guerra, Manuel
  • Solla-Gullón, José
  • García Cruz, Leticia
  • Montiel, Vicente
  • Irabien, Ángel
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The electrochemical valorisation of captured CO2 is an attractive option to obtain value-added products, and at the same time, to chemically store energy from intermittent renewable sources. Among the different products, formic acid/formate is particularly interesting since it is one of the most promising materials for hydrogen storage and candidate fuel for low-temperature fuel cells. In this work, a process for CO2 electroreduction to formate is studied on a continuous filter-press cell using an innovative electrode: Sn Catalyst Coated Membrane Electrodes (Sn-CCMEs) - comparing with previous approaches based on Sn Gas Diffusion Electrodes (Sn-GDEs), using the same synthesised tin nanoparticles (Sn NPs) and operating conditions. The Sn-CCME is prepared by depositing Sn NPs directly over a Nafion 117 membrane, and it allows working with a gaseous CO2 flow humidified with water as the input of the electrochemical cell, avoiding the use of the liquid catholyte. Sn-CCME operates at lower current densities (45 mA cm-2) than previous Sn-GDEs (200 mA cm-2), which resulted in lower rates of formate production. However, the proposed Sn-CCME, allowed achieving even higher formate concentrations with an energy consumption 50% lower than with the Sn-GDEs. The influence of key variables such as temperature and water input flow on the performance of the process using Sn-CCMEs was also analysed in a controlled experimental set-up specifically designed and built for this goal. Increasing the temperature of the gaseous stream did not improve the performance. The best results were obtained at ambient conditions of temperature (20 °C) and with the amount of water in the CO2 stream at 0.5 g h-1, giving the highest formate concentration (19.2 g L-1) with a Faradaic efficiency close to 50% and an energy consumption of 244 kW h kmol-1. More research is still required to further improve CCME configuration in order to increase formate rate and efficiency without increasing energy consumption.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Use of Chitosan as Copper Binder in the Continuous Electrochemical Reduction of CO2 to Ethylene in Alkaline Medium

  • Marcos-Madrazo, Aitor
  • Casado-Coterillo, Clara
  • Iniesta, Jesus
  • Irabien, Ángel
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
This work explores the potential of novel renewable materials in electrode fabrication for the electrochemical conversion of carbon dioxide (CO2) to ethylene in alkaline media. In this regard, the use of the renewable chitosan (CS) biopolymer as ion-exchange binder of the copper (Cu) electrocatalyst nanoparticles (NPs) is compared with commercial anion-exchange binders Sustainion and Fumion on the fabrication of gas diffusion electrodes (GDEs) for the electrochemical reduction of carbon dioxide (CO2R) in an alkaline medium. They were tested in membrane electrode assemblies (MEAs), where selectivity to ethylene (C2H4) increased when using the Cu:CS GDE compared to the Cu:Sustainion and Cu:Fumion GDEs, respectively, with a Faradaic efficiency (FE) of 93.7% at 10 mA cm−2 and a cell potential of −1.9 V, with a C2H4 production rate of 420 µmol m−2 s−1 for the Cu:CS GDE. Upon increasing current density to 90 mA cm−2, however, the production rate of the Cu:CS GDE rose to 509 µmol/m2s but the FE dropped to 69% due to increasing hydrogen evolution reaction (HER) competition. The control of mass transport limitations by tuning up the membrane overlayer properties in membrane coated electrodes (MCE) prepared by coating a CS-based membrane over the Cu:CS GDE enhanced its selectivity to C2H4 to a FE of 98% at 10 mA cm−2 with negligible competing HER. The concentration of carbon monoxide was below the experimental detection limit irrespective of the current density, with no CO2 crossover to the anodic compartment. This study suggests there may be potential in sustainable alernatives to fossil-based or perfluorinated materials in ion-exchange membrane and electrode fabrication, which constitute a step forward towards decarbonization in the circular economy perspective.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Improving trade-offs in the figures of merit of gas-phase single-pass continuous CO2 electrocatalytic reduction to formate

  • Díaz-Sainz, Guillermo
  • Alvarez-Guerra, Manuel
  • Avila-Bolivar, Beatriz
  • Solla-Gullón, José
  • Montiel, Vicente
  • Irabien, Ángel
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The electrochemical conversion of CO2 is gaining increasing attention because it could be considered as an appealing strategy for making value-added products at mild conditions from CO2 captured. In this work, we report a process for the electrocatalytic reduction of CO2 to formate (HCOO−) operating in a continuous way, employing a single pass of the reactants through the electrochemical reactor and using Bi carbon supported nanoparticles in the form of a membrane electrode assembly composed by a Gas Diffusion Electrode, a current collector and a cationic exchange membrane. This contribution presents the best trade-off between HCOO− concentration, Faradaic Efficiency and energy consumption in the literature. We also show noteworthy values of energy consumption required of only 180 kWh·kmol−1 of HCOO−, lower than previous approaches, working at current densities that allow achieving formate concentration higher than 300 g·L−1 and simultaneously, a Faradaic Efficiency close to 90%. The results here displayed make the electrochemical approach closer for future implementation at the industrial scale.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Gas–liquid–solid reaction system for CO2 electroreduction to formate without using supporting electrolyte

  • Díaz-Sainz, Guillermo
  • Alvarez-Guerra, Manuel
  • Solla-Gullón, José
  • García Cruz, Leticia
  • Montiel, Vicente
  • Irabien, Ángel
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The use of bismuth‐based catalysts is promising for formate production by the electroreduction of CO2 captured from waste streams. However, compared to the extensive research on catalysts, only a few studies have focused on electrochemical reactor performance. Hence, this work studied a continuous‐mode gas–liquid–solid reaction system for investigating CO2 electroreduction to formate using Bi‐catalyst‐coated membrane electrodes as cathodes. The experimental setup was designed to analyze products obtained in both liquid and gas phases. The influence of relevant variables (e.g., temperature and input water flow) was analyzed, with the thickness of the liquid film formed over the cathode surface being a key parameter affecting system performance. Promising results, including a high formate concentration of 34 g/L with faradaic efficiency for formate of 72%, were achieved.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

CO2 electroreduction to formate: Continuous single-pass operation in a filter-press reactor at high current densities using Bi gas diffusion electrodes

  • Díaz-Sainz, Guillermo
  • Alvarez-Guerra, Manuel
  • Solla-Gullón, José
  • García Cruz, Leticia
  • Montiel, Vicente
  • Irabien, Ángel
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Electrocatalytic reduction of CO2 has been taken into consideration as a fascinating option to store energy from intermittent renewable sources in the form of chemical value-added products. Among the different value-added products, formic acid or formate is particularly attractive since it can be used as a fuel for low-temperature fuel-cells and as a renewable hydrogen carrier. Very recently, a rapidly increasing number of studies have revealed Bi as a promising electrocatalytic material for the CO2 electroreduction to formate, but the performance of Bi electrodes operating in a continuous mode and high current density (j) has been hardly investigated yet. Thus, this work aims at studying the CO2 electroreduction to formate working in a continuous mode in a filter-press-reactor at a j up to 300 mA·cm−2 using Bi electrodes. Bismuth Gas Diffusion Electrodes (Bi-GDEs) were fabricated from carbon-supported Bismuth-nanoparticles. The influence of j and the electrolyte flow/area ratio in the performance of the Bi-GDEs towards formate were evaluated. Working at j of 300 mA·cm−2, a concentration of 5.2 g formate·L−1 with a faradaic efficiency (FE) and rate of 70% and 11 mmol·m−2·s−1, respectively were achieved. Lowering the j to 90 mA·cm−2, formate concentrations of up to 7.5 g·L−1 could be obtained with an excellent FE of 90%. Interestingly, the highest concentration of formate obtained was 18 g·L−1, but at expenses of an important decrease in FE. Although the results of this study are interesting and promising, further research is required to increase formate concentration for a future implementation at industrial scale.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Preparation and Identification of Optimal Synthesis Conditions for a Novel Alkaline Anion-Exchange Membrane

  • Marcos-Madrazo, Aitor
  • Casado-Coterillo, Clara
  • García Cruz, Leticia
  • Iniesta, Jesus
  • Simonelli, Laura
  • Sebastián, Víctor
  • Encabo-Berzosa, María del Mar
  • Arruebo, Manuel
  • Irabien, Ángel
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
The physicochemical and mechanical properties of new alkaline anion-exchange membranes (AAEMs) based on chitosan (CS) and poly(vinyl alcohol) (PVA) polymers doped with unsupported copper nanoparticles (NPs) and copper exchanged over different porous materials were investigated regarding ion-exchange capacity (IEC), OH− conductivity, water uptake (WU), water vapor permeability (WVP), and thermal and mechanical resistance. The influence of the type of filler included in different morphologies and filler loading has been explored using copper exchanged materials such as the layered porous titanosilicate AM-4, layered stannosilicate UZAR-S3, and zeolites Y, MOR, and BEA. Compared to commercially available anion-exchange membranes, the best performing membranes in terms of WU, IEC, OH− conductivity and WVP in this study were those containing 10 wt % of Cu-AM-4 and Cu-UZAR-S3, although 10 wt % Cu-MOR provided better mechanical strength at close values of WVP and anion conductivity. It was also observed that when Cu was exchanged in a porous silicate matrix, its oxidation state was lower than when embedded as unsupported metal NPs. In addition, the statistical analysis of variance determined that the electrochemical properties of the membranes were noticeably affected by both the type and filler loading, and influenced also by the copper oxidation state and content in the membrane, but their hydrophilic properties were more affected by the polymers. The largest significant effects were noticed on the water sorption and transport properties, which gives scope for the design of AAEMs for electrochemical and water treatment applications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preparation and identification of optimal synthesis conditions for a novel alkaline anion-exchange membrane

  • Marcos-Madrazo, Aitor
  • Casado-Coterillo, Clara
  • García-Cruz, Leticia
  • Iniesta, Jesús
  • Simonelli, Laura
  • Sebastián, Víctor
  • Encabo-Berzosa, M. Mar
  • Arruebo, Manuel
  • Irabien, Ángel
The physicochemical and mechanical properties of new alkaline anion-exchange membranes (AAEMs) based on chitosan (CS) and poly(vinyl alcohol) (PVA) polymers doped with unsupported copper nanoparticles (NPs) and copper exchanged over different porous materials were investigated regarding ion-exchange capacity (IEC), OH− conductivity, water uptake (WU), water vapor permeability (WVP), and thermal and mechanical resistance. The influence of the type of filler included in different morphologies and filler loading has been explored using copper exchanged materials such as the layered porous titanosilicate AM-4, layered stannosilicate UZAR-S3, and zeolites Y, MOR, and BEA. Compared to commercially available anion-exchange membranes, the best performing membranes in terms of WU, IEC, OH− conductivity and WVP in this study were those containing 10 wt % of Cu-AM-4 and Cu-UZAR-S3, although 10 wt % Cu-MOR provided better mechanical strength at close values of WVP and anion conductivity. It was also observed that when Cu was exchanged in a porous silicate matrix, its oxidation state was lower than when embedded as unsupported metal NPs. In addition, the statistical analysis of variance determined that the electrochemical properties of the membranes were noticeably affected by both the type and filler loading, and influenced also by the copper oxidation state and content in the membrane, but their hydrophilic properties were more affected by the polymers. The largest significant effects were noticed on the water sorption and transport properties, which gives scope for the design of AAEMs for electrochemical and water treatment applications., This research was funded by Spanish Ministry of Science, Innovation, and Universities under project number CTQ2016-76231-C2-1-R at the Universidad de Cantabria., Peer reviewed