Skip to main content

NUEVOS MATERIALES NANOESTRUCTURADOS PARA REACCIONES ELECTROQUIMICAS ACOPLADAS: REDUCCION DE CO2 Y PROCESOS OXIDATIVOS DE INTERES MEDIOAMBIENTAL

PID2019-108136RB-C32

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Electrochemistry in the water-energy-climate nexus

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Recent progress in the development of porous carbon-based electrodes for sensing applications

  • Casanova, Ana
  • Iniesta, Jesus
  • Gomis-Berenguer, Alicia
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
Electrochemical (bio)sensors are considered clean and powerful analytical tools capable of converting an electrochemical reaction between analytes and electrodes into a quantitative signal. They are an important part of our daily lives integrated in various fields such as healthcare, food and environmental monitoring. Several strategies including the incorporation of porous carbon materials in its configuration have been applied to improve their sensitivity and selectivity in the last decade. The porosity, surface area, graphitic structure as well as chemical composition of materials greatly influence the electrochemical performance of the sensors. In this review, activated carbons, ordered mesoporous carbons, graphene-based materials, and MOF-derived carbons, which are used to date as crucial elements of electrochemical devices, are described, starting from their textural and chemical compositions to their role in the outcome of electrochemical sensors. Several relevant and meaningful examples about material synthesis, sensor fabrication and applications are illustrated and described. The closer perspectives of these fascinating materials forecast a promising future for the electrochemical sensing field.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

On the activity and stability of Sb2O3/Sb nanoparticles for the electroreduction of CO2 toward formate

  • Avila-Bolivar, Beatriz
  • Montiel, Vicente
  • Solla-Gullón, José
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The development of new electrocatalysts with improved properties for the electrochemical reduction of CO2 is being the objective of innumerable contributions. In this contribution, the electrochemical reduction of CO2 to formate on novel carbon-supported antimony nanoparticles (Sb/C NPs) is studied. The carbon-supported Sb2O3/Sb nanoparticles were synthesised using a simple methodology at room temperature and characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The Sb2O3/Sb/C electrodes were prepared by air-brushed onto a carbon paper and were characterized by scanning electron microscopy and energy-dispersive X-ray spectroscopy. The Sb2O3/Sb/C electrodes were also electrochemically characterized by cyclic voltammetry and displayed a clear activity for CO2 electroreduction. To evaluate the properties of the electrodes for the reduction of CO2, electrolyses at different potentials were systematically conducted. Hydrogen and formate were the only products found. The faradic efficiency towards formate was found to be about 20%. This FE was in good agreement with previous finding obtained with comparable system. Interestingly, 24-hour tests were carried out to analyse the stability of the material under working conditions. The results indicate that Sb2O3/Sb-based electrodes display a remarkably better stability than other nanostructured electrocatalysts such as Sn or Bi.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Single-Pass Electrooxidation of Glycerol on Bismuth-Modified Platinum Electrodes as an Anodic Process Coupled to the Continuous CO2 Electroreduction toward Formate

  • Peña-Rodríguez, Ailen
  • Fernández-Caso, Kevin
  • Díaz-Sainz, Guillermo
  • Álvarez-Guerra, Manuel
  • Montiel, Vicente
  • Solla-Gullón, José
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
CO2 electroreduction has emerged as a promising strategy for reducing emissions while simultaneously generating valuable products, particularly formic acid/formate. To further enhance the sustainability of this process, the traditional oxygen evolution reaction at the anode can be replaced by a more interesting reaction like glycerol oxidation to high value-added products, in a covalorization approach. In this study, the effect of the presence of a bismuth (Bi) atom supplier (Bi2O3 particles) in the anolyte solution during the glycerol electrooxidation process on platinum (Pt) electrodes coupled with the electroreduction of CO2 to formate is investigated for the first time, operating in a continuous mode with a single pass through the reactor. The results reveal that in the cathode, significant HCOO– production, with Faradaic efficiencies reaching 93%, and modest energy consumption of 208 kW h·kmol–1 were obtained in the continuous CO2 electroreduction to formate using Bi gas diffusion electrodes. On the other hand, in the anode, the presence of Bi2O3 particles leads to a significant alteration in the distribution of high-value-added oxidation products obtained. For instance, the anode demonstrates remarkable dihydroxyacetone (DHA) production of 283 μmol·m–2·s–1, surpassing the results obtained with the nonmodified Pt electrodes. The performance of this system offers a promising pathway for the simultaneous coproduction of high-value-added products from both CO2 and glycerol.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Oxygen reduction reaction on Pd nanoparticles supported on novel mesoporous carbon materials

  • Lüsi, Madis
  • Erikson, Heiki
  • Tammeveski, Kaido
  • Treshchalov, Alexey
  • Kikas, Arvo
  • Piirsoo, Helle-Mai
  • Kisand, Vambola
  • Tamm, Aile
  • Aruväli, Jaan
  • Solla-Gullón, José
  • Feliu, Juan M.
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
In this work three mesoporous nitrogen-doped carbon support materials were evaluated for oxygen reduction reaction (ORR) in comparison to Vulcan carbon in 0.1 M KOH and 0.5 M H2SO4 solutions. Palladium nanoparticles were synthesised using citrate method and the average particle size of 3.9 ± 0.6 nm was obtained, which was determined from transmission electron microscopy (TEM) images. Unique porosities of these mesoporous engineered catalyst supports (ECS) were evaluated using the BET method and all of the materials displayed similar microporosity, altrough mesopore distribution varied greatly between these materials. Three different loadings of the Pd catalyst were applied to the support materials (varying between 20-40 wt% of Pd) to evaluate the support ability to disperse a large amount of Pd. By comparing the 40 wt% Pd loaded ECS-003604 and Vulcan XC-72R it can be noted that the Vulcan carbon-supported Pd catalyst is more agglomerated. The agglomeration of this catalyst is also noticeable from cyclic voltammetry (CV) studies, where the PdO reduction peak shifts to more positive values as compared to the mesoporous Pd/C counterparts. The ORR kinetics were explored using the rotating disc electrode (RDE) method. In acidic media a Pd catalyst supported on a bimodal mesoporous ECS material showed highest specific activity for oxygen electroreduction, while in alkaline the activity difference is less noticeable between the Pd-based electrocatalyst materials. One of the mesoporous N-doped carbon supported Pd catalyst was also compared to Pd/Vulcan cathode in single-cell alkaline anion exchange membrane fuel cell and improved peak power density was observed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Use of Chitosan as Copper Binder in the Continuous Electrochemical Reduction of CO2 to Ethylene in Alkaline Medium

  • Marcos-Madrazo, Aitor
  • Casado-Coterillo, Clara
  • Iniesta, Jesus
  • Irabien, Ángel
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
This work explores the potential of novel renewable materials in electrode fabrication for the electrochemical conversion of carbon dioxide (CO2) to ethylene in alkaline media. In this regard, the use of the renewable chitosan (CS) biopolymer as ion-exchange binder of the copper (Cu) electrocatalyst nanoparticles (NPs) is compared with commercial anion-exchange binders Sustainion and Fumion on the fabrication of gas diffusion electrodes (GDEs) for the electrochemical reduction of carbon dioxide (CO2R) in an alkaline medium. They were tested in membrane electrode assemblies (MEAs), where selectivity to ethylene (C2H4) increased when using the Cu:CS GDE compared to the Cu:Sustainion and Cu:Fumion GDEs, respectively, with a Faradaic efficiency (FE) of 93.7% at 10 mA cm−2 and a cell potential of −1.9 V, with a C2H4 production rate of 420 µmol m−2 s−1 for the Cu:CS GDE. Upon increasing current density to 90 mA cm−2, however, the production rate of the Cu:CS GDE rose to 509 µmol/m2s but the FE dropped to 69% due to increasing hydrogen evolution reaction (HER) competition. The control of mass transport limitations by tuning up the membrane overlayer properties in membrane coated electrodes (MCE) prepared by coating a CS-based membrane over the Cu:CS GDE enhanced its selectivity to C2H4 to a FE of 98% at 10 mA cm−2 with negligible competing HER. The concentration of carbon monoxide was below the experimental detection limit irrespective of the current density, with no CO2 crossover to the anodic compartment. This study suggests there may be potential in sustainable alernatives to fossil-based or perfluorinated materials in ion-exchange membrane and electrode fabrication, which constitute a step forward towards decarbonization in the circular economy perspective.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Fabrication of a biocathode for formic acid production upon the immobilization of formate dehydrogenase from Candida boidinii on a nanoporous carbon

  • Hernández Ibáñez, Naiara
  • Gomis-Berenguer, Alicia
  • Montiel, Vicente
  • Ania, Conchi O.
  • Iniesta, Jesus
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
The immobilization of the non-metallic enzyme formate dehydrogenase from Candida boidinii (CbFDH) into a nanoporous carbon with appropriate pore structure was explored for the bioelectrochemical conversion of CO2 to formic acid (FA). Higher FA production rates were obtained upon immobilization of CbFDH compared to the performance of the enzyme in solution, despite the lower nominal CbFDH to NADH (β-nicotinamide adenine dinucleotide reduced) cofactor ratio and the lower amount of enzyme immobilized. The co-immobilization of the enzyme and a rhodium complex as mediator in the nanoporous carbon allowed the electrochemical regeneration of the cofactor. Preparative electrosynthesis of FA carried out on biocathodes of relatively large dimensions (ca. 3 cm × 2 cm) confirmed the higher production rate of FA for the immobilized enzyme. Furthermore, the incorporation of a Nafion binder in the biocathodes did not modify the immobilization extent of the CbFDH in the carbon support. Coulombic efficiencies close to 46% were obtained for the electrosynthesis carried out at −0.8 V for the biocathodes prepared using the lowest Nafion binder content and the co-immobilized enzyme and rhodium redox mediator. Although these values may yet be improved, they confirm the feasibility of these biocathodes in larger scales (6 cm2) beyond most common electrode dimensions reported in the literature (ca. a few mm2).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Chitosan-based mixed matrix composite membranes for CO2/CH4 mixed gas separation. Experimental characterization and performance validation

  • Torre-Celeizabal, Andrea
  • Casado-Coterillo, Clara
  • Gomis-Berenguer, Alicia
  • Iniesta, Jesus
  • Garea, Aurora
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
Membrane technology is acknowledged as one of the most efficient for biogas upgrading, separating simultaneously CH4 and CO2 in the retentate and permeate streams, respectively. The sustainability would still be improved by using renewable and environmentally friendly materials for membrane fabrication. Specifically, this study is focused on laboratory-scale mixed gas separation tests of composite membranes prepared from chitosan (CS), a hydrophilic, biodegradable and biocompatible polymer from abundant natural resources, with good adhesive and film forming properties and high affinity for CO2 due to the primary amine and hydroxyl groups functionalities in CS. To improve mechanical resistance and CO2/CH4 separation, CS was hybridized by a 5wt.% loading of non-toxic ionic [emim][acetate] liquid (IL), and variable loadings of compatible inorganic fillers, such as 3D zeolite 4A and NaETS-10, and layered AM-4 titanosilicate. The CS-based mixed matrix layer was coated on porous polyether sulfone (PES) support. The CO2 permeance and CO2/CH4 separation was measured at different feed concentrations to evaluate the membranes performance in the treatment of different streams. This separation behavior was explained by the wet thickness, water uptake, morphology and ionic resistance of the composite membrane. As such, the 5 wt.% Zeolite 4A and NaETS-10-filled ILCS/PES membranes provided a good dispersion in the ILCS matrix and the mixed matrix layer a good adhesion with the porous PES support, leading to high CO2 permeances and separation factors up to 30, whereas the more hydrophilic lamellar AM-4 titanosilicate-filled ILCS layer showed cluster agglomeration in the matrix and a faster detachment of the coated layer from the PES substrate. With increasing filler loading, an increase of the permeance of both CO2 and CH4 gas components was, although selectivity decreased upon increasing AM-4 filler loading. The CO2/CH4 mixed gas separation performance was validated by a custom-built model for a wide range of feed composition, to cover such processes as natural gas sweetening, biogas upgrading and enhanced oil recovery with acceptable relative error below 10% (absolute value), except for the AM-4 titanosilicate-filled ILCS membranes, showing morphological fabrication defects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

All-in-one continuous electrochemical monitoring of 2-phenylphenol removal from water by electro-Fenton treatment

  • Gomis-Berenguer, Alicia
  • Casanova, Ana
  • Banks, Craig E.
  • Iniesta, Jesus
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
The biggest allure of heterogeneous electro-Fenton (HEF) processes largely fails on its high efficiency for the degradation of a plethora of hazardous compounds present in water, but still challenging to search for good and cost-effective electrocatalyst. In this work, carbon black (CB) and oxidised carbon black (CBox) materials were investigated as cathodes in the electrochemical production of hydrogen peroxide involved in HEF reaction for the degradation of 2-phenylphenol (2PP) as a target pollutant. The electrodes were fabricated by employing carbon cloth as support, and the highest H2O2 production yields were obtained for the CBox, pointing out the beneficial effect of the hydrophilic character of the electrode and oxygen-type functionalization of the carbonaceous surface. HEF degradation of 2PP was explored at − 0.7 V vs. Ag/AgCl exhibiting the best conversion rates and degradation grade (total organic carbon) for the CBox-based cathode. In addition, the incorporation of an electrochemical sensor of 2PP in line with the HEF reactor was accomplished by the use of screen-printed electrodes (SPE) in order to monitor the pollutant degradation. The electrochemical sensor performance was evaluated from the oxidation of 2PP in the presence of Fe2+ ions by using square wave voltammetry (SWV) technique. The best electrochemical sensor performance was based on SPE modified with Meldola Blue showing a high sensitivity, low detection limit (0.12 ppm) and wide linear range (0.5–21 ppm) with good reproducibility (RSD 2.3 %). The all-in-one electrochemical station has been successfully tested for the degradation and quantification of 2PP, obtaining good recoveries analysing spiked waters from different water matrices origins.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

One-pot electrodeposition of multilayered 3D PtNi/polymer nanocomposite. H2O2 determination in aerosol phase

  • Jiménez-Pérez, Rebeca
  • Agrisuelas, Jerónimo
  • Gomis-Berenguer, Alicia
  • Baeza-Romero, María Teresa
  • Valero, Edelmira
In this work, 3D-structured nanocomposites were synthesized in one pot by electrochemical deposition of alternating layers of an azo type polymer (polyazure-A) with platinum and nickel nanoparticles. The hybrid PtNi/poly(AzA) film was electrochemically deposited on screen-printed carbon electrodes by layer-by-layer assembly as a function of the number of cyclic voltammograms for electrodeposition of the conducting polymer and the electrode potential applied for electro-reduction of the metal salts. The physicochemical characteristics of the resulting films were studied using electrochemical and microscopic techniques. The 3D molecular nanoarchitecture presents a hollow porous structure dependent on the electrode potential set for the electro-reduction of Pt and Ni nanoparticles. The electrochemical sensor was validated in terms of sensitivity, limit of detection, stability and repeatability, exhibiting a highly sensitive H2O2 detection, with LoD 68.5 nM (S/N = 3) at 0.05 V vs. Ag-SPCE for the electrode modified with 20 cycles for the conducting polymer electrodeposition and −2.0 V for metal ions reduction. The aim of this work also included the outcome of the electrochemical sensor after incorporating the room temperature ionic liquid 1‑butyl‑2,3-dimethylimidazolium tetrafluoroborate within the PtNi/poly(AzA) film, which notably improved the analytical parameters of the system, with LoD 14.5 nM at the same potential. Therefore, as proof of concept, the PtNi/poly(AzA) film-based electrode was explored towards the suitability of an electrochemical sensor for the determination of hydrogen peroxide in aerosol phase. The outstanding features of the PtNi/poly(AzA) film-based electrode modified with the aforementioned ionic liquid allowed for the continuous monitoring of H2O2 in an aerosol stream generated with an ultrasonic diffuser at the low applied potential of 0.05 V. In addition, monitoring H2O2 samples through a series of ON/OFF switches for over 3 h, the sensor provided a fast and reproducible response.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Revealing the Intrinsic Restructuring of Bi2O3 Nanoparticles into Bi Nanosheets during Electrochemical CO2 Reduction

  • Avila-Bolivar, Beatriz
  • Lopez Luna, Mauricio
  • Yang, Fengli
  • Yoon, Aram
  • Montiel, Vicente
  • Solla-Gullón, José
  • Chee, See Wee
  • Roldan Cuenya, Beatriz
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Bismuth is a catalyst material that selectively produces formate during the electrochemical reduction of CO2. While different synthesis strategies have been employed to create electrocatalysts with better performance, the restructuring of bismuth precatalysts during the reaction has also been previously reported. The mechanism behind the change has, however, remained unclear. Here, we show that Bi2O3 nanoparticles supported on Vulcan carbon intrinsically transform into stellated nanosheet aggregates upon exposure to an electrolyte. Liquid cell transmission electron microscopy observations first revealed the gradual restructuring of the nanoparticles into nanosheets in the presence of 0.1 M KHCO3 without an applied potential. Our experiments also associated the restructuring with solubility of bismuth in the electrolyte. While the consequent agglomerates were stable under moderate negative potentials (−0.3 VRHE), they dissolved over time at larger negative potentials (−0.4 and −0.5 VRHE). Operando Raman spectra collected during the reaction showed that under an applied potential, the oxide particles reduced to metallic bismuth, thereby confirming the metal as the working phase for producing formate. These results inform us about the working morphology of these electrocatalysts and their formation and degradation mechanisms.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Electrochemical reduction of CO2 to formate on nanoparticulated Bi-Sn-Sb electrodes

  • Avila-Bolivar, Beatriz
  • Montiel, Vicente
  • Solla-Gullón, José
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Human activities during the last century have increased the concentration of greenhouse gases in Earth's atmosphere, mainly carbon dioxide (CO2), and the impacts of climate change around the world are becoming more damaging. Therefore, scientific research is needed to mitigate the consequences of atmospheric CO2, and, among others, the electrochemical CO2 conversion to useful chemicals is one of the most interesting alternatives. Herein, different Bi, Sn and Sb systems were synthesised as nanoparticles, supported on carbon (Vulcan XC-72R) and finally used to manufacture electrodes. The Bi-Sn-Sb nanoparticulated systems and their corresponding electrodes were characterised by TEM, XPS, ICP-OES and SEM. Electrochemical reduction of CO2 to formate was performed in an electrochemical H-type cell in a CO2-saturated KHCO3 and KCl solution. The Bi-Sn-Sb electrodes exhibited good activity and selectivity for the CO2 reduction towards formate. Particularly, Bi95Sb05/C and Bi80Sn10Sb10/C electrodes showed improved stability compared to previous works, keeping values of formate efficiency over 50 % after 24 h.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Continuous carbon dioxide electroreduction to formate coupled with the single-pass glycerol oxidation to high value-added products

  • Fernández-Caso, Kevin
  • Peña-Rodríguez, Ailen
  • Solla-Gullón, José
  • Montiel, Vicente
  • Díaz-Sainz, Guillermo
  • Alvarez-Guerra, Manuel
  • Irabien, Ángel
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
CO2 electroreduction has been considered a promising alternative to simultaneously reduce CO2 emissions and produce value-added products. Among others, the production of formic acid/formate is particularly attractive. Although promising results have already been obtained in the literature, one of the recent approaches to improve the process deals with the use of an alternative reaction at the anode instead of the traditional oxygen evolution reaction (OER). In this context, this work reports, for the first time, the study of the CO2 electroreduction to formate coupled with the electrooxidation of glycerol to high-added value products where both half-reactions operate in a continuous mode with a single pass of the reactants through the electrochemical cell. Interestingly, at the cathode, similar results to those previously reported were obtained, reaching formate concentrations of about 18 g·L-1 at a 200 mA·cm-2. In addition, at the anode, promising dihydroxyacetone productions of 196 µmol·m-2·s-1 were simultaneously achieved in the output stream of the anodic compartment. These findings represent a significant step forward for the development and application of the technology.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Nanoporous carbons for the electrochemical reduction of CO2: Challenges to discriminate the roles of nanopore confinement and functionalization

  • Gomis-Berenguer, Alicia
  • Amaterz, Elhassan
  • Torres, Sebastian
  • Iniesta, Jesus
  • Ania, Conchi O.
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Torres, Sebastian|||/items/5b691317-6886-4713-a846-5a56024cb95d
The use of porous carbons in the electrochemical reduction of CO2 (CO2ER) has become an active research area. Despite good faradaic efficiencies and production rates, understanding their electrocatalytic activity is challenging owing to the complexity of the CO2-nanoporous carbon interactions. In this opinion review, we emphasize on the critical importance of discriminating the impacts of nanopore confinement and surface functionalization of porous carbons on the CO2ER. We have performed a rational analysis of recent literature addressing this topic, comparing electrocatalytic performance with knowledge about CO2-porous carbon affinity. Reported data have been re-discussed focusing on a complete characterization of the carbon electrodes to correlate physicochemical characteristics and the electrocatalytic activity. A perspective view is provided for future directions on the use of porous carbons in the CO2ER.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

On the performance of carbon-based screen-printed electrodes for (in)organic hydroperoxides sensing in rainwater

  • Jiménez-Pérez, Rebeca
  • Iniesta, Jesus
  • Baeza-Romero, María Teresa
  • Valero, Edelmira
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
Hydroperoxides play important roles in atmospheric chemical processes since they act as strong oxidants. This paper details with the modification, characterization and performance of different carbon-based screen-printed electrodes to develop a sensor that allows to analyze organic and inorganic hydroperoxides in atmospheric samples. Commercial electrodes made up of graphite, graphene, carbon nanotubes and graphene oxide were electrochemically activated and subsequently modified by layer-by-layer method with a conducting polymer of azure-A and electrodeposited platinum nanoparticles. Characterization of modified electrodes was performed by FE-SEM, XPS, Raman spectroscopy, cyclic voltammetry, and impedance spectroscopy. Even though all modified carbonaceous substrates enabled the development of competitive electrochemical sensors for (in)organic hydroperoxides detection, carbon nanotubes underlying substrate exhibited the best performances in terms of sensitivity, stability, limit of detection and linear range. This amperometric sensor displayed linear responses to hydroperoxides over 0.081–450 μM with detection limits in the range of 24–558 nM and sensitivity values among 0.0628±1.6E-4 and 0.0112±0.71E-4 μA/μM for the different hydroperoxides herein studied. The developed electrochemical sensor was successfully applied to the analysis of (in)organic hydroperoxides in rainwater samples. Measurements in rainwater were performed in a city located in the East of Spain and collected at two different sites (downtown and suburban area) on two different dates (July and November 2020). The presented results demonstrated high sensitivity and selectivity for the detection of hydroperoxides among a plethora of substances naturally present in rainwater.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Coupling glycerol oxidation reaction using Ni-Co foam anodes to CO2 electroreduction in gas-phase for continuous co-valorization

  • Fernández-Caso, Kevin
  • Molera, Martí
  • Andreu, Teresa
  • Solla-Gullón, José
  • Montiel, Vicente
  • Díaz-Sainz, Guillermo
  • Alvarez-Guerra, Manuel
  • Irabien, Ángel
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Electrocatalytic reduction of CO2 is a promising alternative for storing energy and producing valuable products, such as formic acid/formate. Continuous gas-phase CO2 electroreduction has shown great potential in producing high concentrations of formic acid or formate at the cathode while allowing the oxygen evolution or the hydrogen oxidation reactions to occur at the anode. It is advantageous to use a more relevant oxidation reaction, such as glycerol which is a plentiful by-product of current biodiesel production process. This work successfully manages to couple the glycerol oxidation reaction with continuous gas-phase CO2 electroreduction to formate with the implementation of Ni-Co foam-based anodes. The MEA-electrolyzer developed can achieve significantly high formate concentrations of up to 359 g L-1 with high Faradaic efficiencies of up to 95%, while also producing dihydroxyacetone at a rate of 0.434 mmol m−2 s−1. In comparison with existing literature, this represents an excellent trade-off between relevant figures of merit and can remarkably contribute to a future implementation of this coupled electrochemical system approach at larger scales.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

CO2 reduction to formate on an affordable bismuth metal-organic framework based catalyst

  • Avila-Bolivar, Beatriz
  • Cepitis, Ritums
  • Alam, Mahboob
  • Assafrei, Jürgen-Martin
  • Ping, Kefeng
  • Aruväli, Jaan
  • Kikas, Arvo
  • Kisand, Vambola
  • Vlassov, Sergei
  • Käärik, Maike
  • Leis, Jaan
  • Ivaništštev, Vladislav
  • Starkov, Pavel
  • Montiel, Vicente
  • Solla-Gullón, José
  • Kongi, Nadezda
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Electrochemical reduction of carbon dioxide (CO2) into green fuels and valuable chemicals is an up-and-coming method of CO2 valorization. Formate/formic acid is one the most desirable product among the many other possible chemicals that can be generated from CO2. Herein, we report on a simple and tunable method to prepare Bi-based electrocatalyst. An affordable metal-organic framework (MOF) precursor TAL-33 has been utilized upon carbonization. This MOF was fabricated from a novel modular carbon-rich ligand 1H-benzo[d]imidazole-5,6-diol and bismuth chloride. Cyclic voltammetry and chronoamperometric measurements were performed to investigate the electrocatalytic activity and selectivity towards the formate. The most promising samples have shown high Faradaic efficiency and stability. The in-depth physical characterization of catalyst structure (XPS, XRD, SEM, and TEM) was performed to investigate the structure-activity relationships. Theoretical studies have been performed to confirm that the enhanced CO2 electroreduction to formate is linked to the presence of metallic bismuth sites.