Skip to main content

PREPARACION Y CARACTERIZACION DE MATERIALES Y ELECTRODOS PARA LA ELECTROREDUCCION DE CO2

CTQ2016-76231-C2-2-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Shape-controlled metal nanoparticles for electrocatalytic applications

  • García Cruz, Leticia
  • Montiel, Vicente
  • Solla-Gullón, José
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The application of shape-controlled metal nanoparticles is profoundly impacting the field of electrocatalysis. On the one hand, their use has remarkably enhanced the electrocatalytic activity of many different reactions of interest. On the other hand, their usage is deeply contributing to a correct understanding of the correlations between shape/surface structure and electrochemical reactivity at the nanoscale. However, from the point of view of an electrochemist, there are a number of questions that must be fully satisfied before the evaluation of the shaped metal nanoparticles as electrocatalysts including (i) surface cleaning, (ii) surface structure characterization, and (iii) correlations between particle shape and surface structure. In this chapter, we will cover all these aspects. Initially, we will collect and discuss about the different practical protocols and procedures for obtaining clean shaped metal nanoparticles. This is an indispensable requirement for the establishment of correct correlations between shape/surface structure and electrochemical reactivity. Next, we will also report how some easy-to-do electrochemical experiments including their subsequent analyses can enormously contribute to a detailed characterization of the surface structure of the shaped metal nanoparticles. At this point, we will remark that the key point determining the resulting electrocatalytic activity is the surface structure of the nanoparticles (obviously, the atomic composition is also extremely relevant) but not the particle shape. Finally, we will summarize some of the most significant advances/results on the use of these shaped metal nanoparticles in electrocatalysis covering a wide range of electrocatalytic reactions including fuel cell-related reactions (electrooxidation of formic acid, methanol and ethanol and oxygen reduction) and also CO2 electroreduction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Catalyst Coated Membrane Electrodes for the gas phase CO2 electroreduction to formate

  • Díaz-Sainz, Guillermo
  • Alvarez-Guerra, Manuel
  • Solla-Gullón, José
  • García Cruz, Leticia
  • Montiel, Vicente
  • Irabien, Ángel
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The electrochemical valorisation of captured CO2 is an attractive option to obtain value-added products, and at the same time, to chemically store energy from intermittent renewable sources. Among the different products, formic acid/formate is particularly interesting since it is one of the most promising materials for hydrogen storage and candidate fuel for low-temperature fuel cells. In this work, a process for CO2 electroreduction to formate is studied on a continuous filter-press cell using an innovative electrode: Sn Catalyst Coated Membrane Electrodes (Sn-CCMEs) - comparing with previous approaches based on Sn Gas Diffusion Electrodes (Sn-GDEs), using the same synthesised tin nanoparticles (Sn NPs) and operating conditions. The Sn-CCME is prepared by depositing Sn NPs directly over a Nafion 117 membrane, and it allows working with a gaseous CO2 flow humidified with water as the input of the electrochemical cell, avoiding the use of the liquid catholyte. Sn-CCME operates at lower current densities (45 mA cm-2) than previous Sn-GDEs (200 mA cm-2), which resulted in lower rates of formate production. However, the proposed Sn-CCME, allowed achieving even higher formate concentrations with an energy consumption 50% lower than with the Sn-GDEs. The influence of key variables such as temperature and water input flow on the performance of the process using Sn-CCMEs was also analysed in a controlled experimental set-up specifically designed and built for this goal. Increasing the temperature of the gaseous stream did not improve the performance. The best results were obtained at ambient conditions of temperature (20 °C) and with the amount of water in the CO2 stream at 0.5 g h-1, giving the highest formate concentration (19.2 g L-1) with a Faradaic efficiency close to 50% and an energy consumption of 244 kW h kmol-1. More research is still required to further improve CCME configuration in order to increase formate rate and efficiency without increasing energy consumption.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

On the activity and stability of Sb2O3/Sb nanoparticles for the electroreduction of CO2 toward formate

  • Avila-Bolivar, Beatriz
  • Montiel, Vicente
  • Solla-Gullón, José
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The development of new electrocatalysts with improved properties for the electrochemical reduction of CO2 is being the objective of innumerable contributions. In this contribution, the electrochemical reduction of CO2 to formate on novel carbon-supported antimony nanoparticles (Sb/C NPs) is studied. The carbon-supported Sb2O3/Sb nanoparticles were synthesised using a simple methodology at room temperature and characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The Sb2O3/Sb/C electrodes were prepared by air-brushed onto a carbon paper and were characterized by scanning electron microscopy and energy-dispersive X-ray spectroscopy. The Sb2O3/Sb/C electrodes were also electrochemically characterized by cyclic voltammetry and displayed a clear activity for CO2 electroreduction. To evaluate the properties of the electrodes for the reduction of CO2, electrolyses at different potentials were systematically conducted. Hydrogen and formate were the only products found. The faradic efficiency towards formate was found to be about 20%. This FE was in good agreement with previous finding obtained with comparable system. Interestingly, 24-hour tests were carried out to analyse the stability of the material under working conditions. The results indicate that Sb2O3/Sb-based electrodes display a remarkably better stability than other nanostructured electrocatalysts such as Sn or Bi.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Fabrication, characterization and electrochemical response of pitch-derived open-pore carbon foams as electrodes

  • Hernández Ibáñez, Naiara
  • Montiel, Vicente
  • Molina Jordá, José Miguel
  • Iniesta, Jesus
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
Macroporous carbon foams (Cfoams) were synthesized by the replication process from mesophase pitch precursor and then characterized for electrochemical sensing and electrosynthetic applications. Scanning electron and optical microscopies revealed a uniform macropore size distribution, replicating the characteristics of the leachable NaCl particles used as templating agent. Nitrogen adsorption/desorption isotherms revealed the absence of meso- or microporosity, and the specific surface area was measured to be 0.38 m2 g−1. Mercury intrusion porosimetry offered similar results for the specific surface area, and the pore size distribution was deduced to be in the interval of 80 nm–200 µm. X-ray photoelectron spectroscopy allowed concluding that the pore surface exhibited poor oxygenated functionalization. Cyclic voltammetry depicted a wide potential window for the oxidation and reduction of water, with small pseudo-capacitive process. The electrochemical behaviour of outer-sphere reversible redox couples provided a standard rate constant k° of ca. 0.7 cm s−1, which is slightly superior to that shown using a conventional glassy carbon electrode. Biomolecules such as ascorbic acid, uric acid and dopamine were also examined to shed some light on sensing applications. The viability of regenerating the coenzyme nicotinamide adenine dinucleotide using a rhodium redox complex has also been addressed in order to explore electrosynthetic potentialities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Fabrication of a biocathode for formic acid production upon the immobilization of formate dehydrogenase from Candida boidinii on a nanoporous carbon

  • Hernández Ibáñez, Naiara
  • Gomis-Berenguer, Alicia
  • Montiel, Vicente
  • Ania, Conchi O.
  • Iniesta, Jesus
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
The immobilization of the non-metallic enzyme formate dehydrogenase from Candida boidinii (CbFDH) into a nanoporous carbon with appropriate pore structure was explored for the bioelectrochemical conversion of CO2 to formic acid (FA). Higher FA production rates were obtained upon immobilization of CbFDH compared to the performance of the enzyme in solution, despite the lower nominal CbFDH to NADH (β-nicotinamide adenine dinucleotide reduced) cofactor ratio and the lower amount of enzyme immobilized. The co-immobilization of the enzyme and a rhodium complex as mediator in the nanoporous carbon allowed the electrochemical regeneration of the cofactor. Preparative electrosynthesis of FA carried out on biocathodes of relatively large dimensions (ca. 3 cm × 2 cm) confirmed the higher production rate of FA for the immobilized enzyme. Furthermore, the incorporation of a Nafion binder in the biocathodes did not modify the immobilization extent of the CbFDH in the carbon support. Coulombic efficiencies close to 46% were obtained for the electrosynthesis carried out at −0.8 V for the biocathodes prepared using the lowest Nafion binder content and the co-immobilized enzyme and rhodium redox mediator. Although these values may yet be improved, they confirm the feasibility of these biocathodes in larger scales (6 cm2) beyond most common electrode dimensions reported in the literature (ca. a few mm2).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Spectroelectrochemical and Density Functional Theory Study of Squaric Acid Adsorption and Oxidation at Gold Thin Film and Single Crystal Electrodes

  • Cheuquepán, William
  • Rodes, Antonio
  • Orts, José M.
  • Feliu, Juan M.
  • Orts, José M.|||/items/ccc73a25-76fa-4f15-bfd7-33f3ab2771bd
  • Rodes, Antonio|||/items/0498f81b-f1a5-4f48-bee3-357d1a2c65e6
The adsorption and oxidation of squaric acid (H2C4O4, H2SQ) at gold single crystal and thin-film electrodes with preferential (111) orientation were studied spectroelectrochemically in perchloric acid solutions. The existence of reversible adsorption–desorption processes in the double-layer region is reflected by structure-sensitive voltammetric features. Infrared reflection absorption spectroscopy experiments carried out with Au(111) and Au(100) single-crystal surfaces in 10 mM H2SQ solutions show potential-dependent adsorbate bands at ca. 1780–1785 and 1511–1577 cm–1 for potentials below 1.00 V RHE. The increasing sensitivity of the attenuated total reflection (ATR)–surface-enhanced infrared reflection absorption (SEIRA) experiments allows the detection of similar features for much lower H2SQ concentrations. According to density functional theory (DFT) calculations, these bands can be assigned to adsorbed squarate anions which are bonded to the gold surfaces in a bidentate configuration through two oxygen atoms, with the molecular plane perpendicular to the metal surface. For 10 mM H2SQ solutions, additional bands are detected in the ATR–SEIRA spectra at ca. 1630 cm–1 both in water and deuterium oxide solutions. Even if this frequency fits with one of the vibrational modes of adsorbed bisquarate, DFT calculations provide an alternative explanation for this potential-dependent feature that could be ascribed to collective vibrational modes of adsorbed squarate appearing at high adsorbate coverage. The existence of in-phase and out-of-phase contributions under these conditions would also explain the broadening and/or splitting of the observed bands. DFT calculations also show that squaric acid molecules adsorb very weakly at the gold surfaces and can be discarded as the origin of the observed infrared bands. The external reflection infrared spectra obtained for gold single-crystal electrodes in the H2SQ oxidation region show bands for dissolved carbon dioxide molecules as the main product. Bands for adsorbed bicarbonate anions formed from carbon dioxide are detected in the ATR–SEIRA spectra.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

pH effects on molecular hydrogen storage in porous organic cages deposited onto platinum electrodes

  • Hernández Ibáñez, Naiara
  • Lee, Jet-Sing M.
  • Iniesta, Jesus
  • Montiel, Vicente
  • Briggs, Michael E.
  • Cooper, Andrew I.
  • Madrid, Elena
  • Marken, Frank
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
Hydrogen absorption is a crucial process in energy storage (microscopic or macroscopic) and management and here a porous organic cage (POC) material is shown to bind and release hydrogen when deposited directly onto a platinum electrode and immersed into aqueous electrolyte. Preliminary voltammetry experiments for the POC CC3 deposited onto a platinum disc electrode reveal uptake and release of hydrogen gas (probably coupled to water release and uptake, respectively) in the vicinity of the electrode. Significant pH effects on the rate of binding and release are reported and explained with a change in H2 binding rate. In future, “wet” POCs or POCs dispersed in aqueous solution could be employed for enhancing hydrogen capture/transport in energy applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

An alternative to hydrogenation processes. Electrocatalytic hydrogenation of benzophenone

  • Mozo Mulero, Cristina
  • Sáez, Alfonso
  • Iniesta, Jesus
  • Montiel, Vicente
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Sáez, Alfonso|||/items/50f4fc4a-e26b-4ac2-9fe2-bafec2319d30
The electrocatalytic hydrogenation of benzophenone was performed at room temperature and atmospheric pressure using a polymer electrolyte membrane electrochemical reactor (PEMER). Palladium (Pd) nanoparticles were synthesised and supported on a carbonaceous matrix (Pd/C) with a 28 wt % of Pd with respect to carbon material. Pd/C was characterised by transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Cathodes were prepared using Pd electrocatalytic loadings (LPd) of 0.2 and 0.02 mg cm−2. The anode consisted of hydrogen gas diffusion for the electrooxidation of hydrogen gas, and a 117 Nafion exchange membrane acted as a cationic polymer electrolyte membrane. Benzophenone solution was electrochemically hydrogenated in EtOH/water (90/10 v/v) plus 0.1 M H2SO4. Current densities of 10, 15 and 20 mA cm−2 were analysed for the preparative electrochemical hydrogenation of benzophenone and such results led to the highest fractional conversion (XR) of around 30% and a selectivity over 90% for the synthesis of diphenylmethanol upon the lowest current density. With regards to an increase by ten times the Pd electrocatalytic loading the electrocatalytic hydrogenation led neither to an increase in fractional conversion nor to a change in selectivity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Improving trade-offs in the figures of merit of gas-phase single-pass continuous CO2 electrocatalytic reduction to formate

  • Díaz-Sainz, Guillermo
  • Alvarez-Guerra, Manuel
  • Avila-Bolivar, Beatriz
  • Solla-Gullón, José
  • Montiel, Vicente
  • Irabien, Ángel
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The electrochemical conversion of CO2 is gaining increasing attention because it could be considered as an appealing strategy for making value-added products at mild conditions from CO2 captured. In this work, we report a process for the electrocatalytic reduction of CO2 to formate (HCOO−) operating in a continuous way, employing a single pass of the reactants through the electrochemical reactor and using Bi carbon supported nanoparticles in the form of a membrane electrode assembly composed by a Gas Diffusion Electrode, a current collector and a cationic exchange membrane. This contribution presents the best trade-off between HCOO− concentration, Faradaic Efficiency and energy consumption in the literature. We also show noteworthy values of energy consumption required of only 180 kWh·kmol−1 of HCOO−, lower than previous approaches, working at current densities that allow achieving formate concentration higher than 300 g·L−1 and simultaneously, a Faradaic Efficiency close to 90%. The results here displayed make the electrochemical approach closer for future implementation at the industrial scale.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Revealing the Intrinsic Restructuring of Bi2O3 Nanoparticles into Bi Nanosheets during Electrochemical CO2 Reduction

  • Avila-Bolivar, Beatriz
  • Lopez Luna, Mauricio
  • Yang, Fengli
  • Yoon, Aram
  • Montiel, Vicente
  • Solla-Gullón, José
  • Chee, See Wee
  • Roldan Cuenya, Beatriz
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Bismuth is a catalyst material that selectively produces formate during the electrochemical reduction of CO2. While different synthesis strategies have been employed to create electrocatalysts with better performance, the restructuring of bismuth precatalysts during the reaction has also been previously reported. The mechanism behind the change has, however, remained unclear. Here, we show that Bi2O3 nanoparticles supported on Vulcan carbon intrinsically transform into stellated nanosheet aggregates upon exposure to an electrolyte. Liquid cell transmission electron microscopy observations first revealed the gradual restructuring of the nanoparticles into nanosheets in the presence of 0.1 M KHCO3 without an applied potential. Our experiments also associated the restructuring with solubility of bismuth in the electrolyte. While the consequent agglomerates were stable under moderate negative potentials (−0.3 VRHE), they dissolved over time at larger negative potentials (−0.4 and −0.5 VRHE). Operando Raman spectra collected during the reaction showed that under an applied potential, the oxide particles reduced to metallic bismuth, thereby confirming the metal as the working phase for producing formate. These results inform us about the working morphology of these electrocatalysts and their formation and degradation mechanisms.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Carbonization of polymers of intrinsic microporosity to microporous heterocarbon: Capacitive pH measurements

  • Hernández Ibáñez, Naiara
  • Iniesta, Jesus
  • Montiel, Vicente
  • Armstrong, Robert
  • Taylor, Stuart H.
  • Madrid, Elena
  • Rong, Yuanyang
  • Castaing, Rémi
  • Malpass-Evans, Richard
  • Carta, Mariolino
  • McKeown, Neil B.
  • Marken, Frank
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
A nitrogen-containing polymer of intrinsic microporosity (PIM-EA-TB-H2; nitrogen adsorption surface area 846 m2 g−1) is vacuum carbonized at 700 °C and thereby directly without post-treatment converted into a microporous heterocarbon (cPIM; N2 adsorption surface area 425 m2 g−1). Nitrogen functionalities in the polymer backbone are retained in the heterocarbon and appear responsible for unusual time-, electrolyte-, and pH-dependent properties. Electrochemical characterization suggests a high specific capacitance (typically 50 F g−1) but only after prolonged immersion in aqueous HClO4. The time-dependent increase in capacitance during immersion is assigned to slow hydration and ingress of HClO4 into hydrophobic micropores (H2SO4 or H3PO4 are more hydrophilic and much less effective). Once hydrated, the microporous heterocarbon exhibits pH-dependent capacitance “switching” over a wide pH range and analytical applications as “capacitive” pH sensor are proposed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Electrochemical Reduction of CO2 to Formate on Easily Prepared Carbon-Supported Bi Nanoparticles

  • Avila-Bolivar, Beatriz
  • García Cruz, Leticia
  • Montiel, Vicente
  • Solla-Gullón, José
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Herein, the electrochemical reduction of CO2 to formate on carbon-supported bismuth nanoparticles is reported. Carbon-supported Bi nanoparticles (about 10 nm in size) were synthesized using a simple, fast and scalable approach performed under room conditions. The so-prepared Bi electrocatalyst was characterized by different physicochemical techniques, including transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction and subsequently air-brushed on a carbon paper to prepare electrodes. These electrodes were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy and also by cyclic voltammetry. Finally, CO2 electroreduction electrolyses were performed at different electrode potentials for 3 h. At the optimal electrode potential (−1.6 V vs AgCl/Ag), the concentration of formate was about 77 mM with a faradaic efficiency of 93 ± 2.5%. A 100% faradaic efficiency was found at a lower potential (−1.5 V vs AgCl/Ag) with a formate concentration of about 55 mM. In terms of stability, we observed that after about 70 h (in 3 h electrolysis experiments at different potentials), the electrode deactivates due to the gradual loss of metal as shown by SEM/EDX analyses of the deactivated electrodes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Polycondensation of Hexamethylenetetramine in Anhydrous Acid Media as a New Approach to Carbyne-Like Materials and Its Application as Dispersant of Carbon Materials

  • Gerasimova, Alyona V.
  • Alekhina, Olga V.
  • García Cruz, Leticia
  • Iniesta, Jesus
  • Melezhik, Alexander V.
  • Tkachev, Aleksey G.
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
Aminocumulene (AC), a technical name that results from the hexamethylenetetramine polycondensation in anhydrous sulfuric acid, was successfully performed toward the synthesis of oligomeric cumulenic compounds made up of carbyne-like (=C=C)x fragments as a main moiety together with amino endcapping groups. The tentative mechanism for the synthesis of the soluble and insoluble AC likely included the participation of carbene species as an intermediate. Spectral properties obtained from UV-Vis, infrared, and Raman spectroscopies, and surface chemistry analysis through X-ray photoelectron spectroscopy of the soluble AC confirmed the presence of a mixture of linear and branched aminocumulene-based oligomers. AC displayed high performance as a dispersant and stabilizer agent of both multi-walled carbon nanotubes and graphene in aqueous solutions after powerful insonation treatment under controlled temperature compared to the most commonly used dispersant agents. Thereby, AC is vitally important for the preparation of carbonaceous materials based on nanoinks in a wide variety of fields.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Electrochemical reduction of CO2 to formate on nanoparticulated Bi-Sn-Sb electrodes

  • Avila-Bolivar, Beatriz
  • Montiel, Vicente
  • Solla-Gullón, José
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Human activities during the last century have increased the concentration of greenhouse gases in Earth's atmosphere, mainly carbon dioxide (CO2), and the impacts of climate change around the world are becoming more damaging. Therefore, scientific research is needed to mitigate the consequences of atmospheric CO2, and, among others, the electrochemical CO2 conversion to useful chemicals is one of the most interesting alternatives. Herein, different Bi, Sn and Sb systems were synthesised as nanoparticles, supported on carbon (Vulcan XC-72R) and finally used to manufacture electrodes. The Bi-Sn-Sb nanoparticulated systems and their corresponding electrodes were characterised by TEM, XPS, ICP-OES and SEM. Electrochemical reduction of CO2 to formate was performed in an electrochemical H-type cell in a CO2-saturated KHCO3 and KCl solution. The Bi-Sn-Sb electrodes exhibited good activity and selectivity for the CO2 reduction towards formate. Particularly, Bi95Sb05/C and Bi80Sn10Sb10/C electrodes showed improved stability compared to previous works, keeping values of formate efficiency over 50 % after 24 h.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Electrochemical performance of activated screen printed carbon electrodes for hydrogen peroxide and phenol derivatives sensing

  • González-Sánchez, María I.
  • Gómez-Monedero, Beatriz
  • Agrisuelas, Jerónimo
  • Iniesta, Jesus
  • Valero, Edelmira
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
Screen-printed carbon electrodes (SPCEs) are widely used for the electroanalysis of a plethora of organic and inorganic compounds. These devices offer unique properties to address electroanalytical chemistry challenges and can successfully compete in numerous aspects with conventional carbon-based electrodes. However, heterogeneous kinetics on SPCEs surfaces is comparatively sluggish, which is why the electrochemical activation of inks is sometimes required to improve electron transfer rates and to enhance sensing performance. In this work, SPCEs were subjected to different electrochemical activation methods and the response to H2O2 electroanalysis was used as a testing probe. Changes in topology, surface chemistry and electrochemical behavior to H2O2 oxidation were performed by SEM, XPS, cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy. The combination of electrochemical activation methods using H2SO4 and H2O2 proved particularly effective. A reduction in charge transfer resistance, together with functionalization with some carbon‑oxygen groups on carbon ink surfaces, were likely responsible for such electrochemical improvement. The use of a two-step protocol with 0.5 M H2SO4 and 10 mM H2O2 under potential cycling conditions was the most effective activation procedure investigated herein, and gave rise to 518-fold higher sensitivity than that obtained for the untreated SPCEs upon H2O2 electrooxidation. The electrochemical behavior of acetaminophen, hydroquinone and dopamine is also shown, as a proof of concept upon the optimum activated SPCEs.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Gas–liquid–solid reaction system for CO2 electroreduction to formate without using supporting electrolyte

  • Díaz-Sainz, Guillermo
  • Alvarez-Guerra, Manuel
  • Solla-Gullón, José
  • García Cruz, Leticia
  • Montiel, Vicente
  • Irabien, Ángel
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The use of bismuth‐based catalysts is promising for formate production by the electroreduction of CO2 captured from waste streams. However, compared to the extensive research on catalysts, only a few studies have focused on electrochemical reactor performance. Hence, this work studied a continuous‐mode gas–liquid–solid reaction system for investigating CO2 electroreduction to formate using Bi‐catalyst‐coated membrane electrodes as cathodes. The experimental setup was designed to analyze products obtained in both liquid and gas phases. The influence of relevant variables (e.g., temperature and input water flow) was analyzed, with the thickness of the liquid film formed over the cathode surface being a key parameter affecting system performance. Promising results, including a high formate concentration of 34 g/L with faradaic efficiency for formate of 72%, were achieved.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

The electrochemistry of 5-halocytosines at carbon based electrodes towards epigenetic sensing

  • Sanjuán, Ignacio
  • Martín-Gómez, Andrés Noel
  • Graham, John P.
  • Hernández Ibáñez, Naiara
  • Banks, Craig E.
  • Thiemann, Thies
  • Iniesta, Jesus
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
Epigenetic modifications in DNA are strongly linked to the triggering and development of pathophysiological disorders and cancer diseases. The halogenation of DNA via radical species, particularly the formation of 5-chlorocytosine (ClC), has recently emerged as epigenetic modification. This work deals for the first time with the exploration of the electrochemical behaviour of ClC on different carbon electrodes such as glassy carbon and boron-doped diamond using cyclic voltammetry and square wave voltammetry. When comparing both carbon materials, the use of glassy carbon turned out to be the appropriate in terms of a more well-defined anodic wave and higher sensitivity. The electrochemical oxidation potential of ClC resulted to be linearly dependent on the pH with a maximum current intensity in acetic acid buffer solution under the conditions used. Moreover, a linear response between peak current intensity and ClC concentration was obtained within the range of 200 and 1000 μM with a limit of detection of 200 μM. In order to elucidate the reaction mechanism of the process, the main oxidation products after a preparative electrolysis were detected by HPLC-MS. Simultaneous detection of ClC in the presence of the unmodified cytosine and mixtures containing other nucleic bases such as guanine, adenine and thymine was also addressed. Finally, the effect of the halogen atom (X = F, Cl, Br) located at position C-5 of the cytosine entity upon the electrooxidation process was examined by theoretical calculations, too.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

CO2 electroreduction to formate: Continuous single-pass operation in a filter-press reactor at high current densities using Bi gas diffusion electrodes

  • Díaz-Sainz, Guillermo
  • Alvarez-Guerra, Manuel
  • Solla-Gullón, José
  • García Cruz, Leticia
  • Montiel, Vicente
  • Irabien, Ángel
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Electrocatalytic reduction of CO2 has been taken into consideration as a fascinating option to store energy from intermittent renewable sources in the form of chemical value-added products. Among the different value-added products, formic acid or formate is particularly attractive since it can be used as a fuel for low-temperature fuel-cells and as a renewable hydrogen carrier. Very recently, a rapidly increasing number of studies have revealed Bi as a promising electrocatalytic material for the CO2 electroreduction to formate, but the performance of Bi electrodes operating in a continuous mode and high current density (j) has been hardly investigated yet. Thus, this work aims at studying the CO2 electroreduction to formate working in a continuous mode in a filter-press-reactor at a j up to 300 mA·cm−2 using Bi electrodes. Bismuth Gas Diffusion Electrodes (Bi-GDEs) were fabricated from carbon-supported Bismuth-nanoparticles. The influence of j and the electrolyte flow/area ratio in the performance of the Bi-GDEs towards formate were evaluated. Working at j of 300 mA·cm−2, a concentration of 5.2 g formate·L−1 with a faradaic efficiency (FE) and rate of 70% and 11 mmol·m−2·s−1, respectively were achieved. Lowering the j to 90 mA·cm−2, formate concentrations of up to 7.5 g·L−1 could be obtained with an excellent FE of 90%. Interestingly, the highest concentration of formate obtained was 18 g·L−1, but at expenses of an important decrease in FE. Although the results of this study are interesting and promising, further research is required to increase formate concentration for a future implementation at industrial scale.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Fabrication and Characterization of Anionic Exchange Membranes Based on Chitosan/Poly (Vinyl) Alcohol and Chitosan/Chondroitin Doped with an Amino Cumulene Derivative and Carbon Nanotubes

  • Gerasimova, Alyona V.
  • Bustamante, A.
  • García Cruz, Leticia
  • Melezhik, Alexander V.
  • Tkachev, Aleksey G.
  • Iniesta, Jesus
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
Anionic exchange membranes mainly based on mixed matrix membranes (MMM) via the crosslinking of either chitosan (CHT) with poly (vinyl alcohol) (CHT : PVA) or CHT with chondroitin sulfate (CHT : CS) in a 50 : 50 wt% were synthesized. The doping of CHT, CHT : PVA and CHT : CS membranes with either the dispersant agent aminocumulene derivative (named AC, coming from the polycondensation of hexamethylenetetramine in an anhydrous acid medium) or with the carbonaceous inch made of multi-walled carbon nanotubes (CNT) dispersed by using AC to perform (AC/CNT) were characterized by the exploration of the topology by scanning electron microscopy, the determination of water uptake, and the analysis of X-ray diffraction spectroscopy together with the measurement of the anionic conductivity by using electrochemical impedance spectroscopy. Results revealed that the modification of the MMMs with the above inorganic carbonaceous fillers, i.e. AC or AC/CNT, improved remarkably the OH– conductivity for all membranes. The modified CHT:CS blend membranes exhibited the highest ionic conductivities of the series. Water uptake increased for the modified CHT and CHT : PVA membranes, whereas a remarkable reduction of water uptake for the CHT : CS based membranes took place. The best membranes in terms of anionic conductivity were correlated with crystallinity and water uptake.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

The Role of Carbon on Copper–Carbon Composites for the Electrooxidation of Alcohols in an Alkaline Medium

  • García Cruz, Leticia
  • Ania, Conchi O.
  • Carvalho, Ana Paula
  • Bandosz, Teresa J.
  • Montiel, Vicente
  • Iniesta, Jesus
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
Copper–carbon composites were prepared following various different synthetic routes and using various carbon precursors (i.e., lignocellulose and graphite oxide), and were used as electrocatalysts for the oxidation of propargyl alcohol (PGA) in an alkaline medium. The electrochemical response of the copper-based catalysts was analyzed in terms of the influence of the metallic species, the carbon matrix incorporated in the composites, and the chemical structure of the ionomers—Nafion and poly (4-vinylpyridine) cross-linked methyl chloride quaternary salt resin (4VP)—used in the fabrication of the electrodes. Data has shown that the incorporation of reduced graphene oxide sheets between the copper metallic particles increased the performance due to the increased conductivity provided by the carbonaceous phase. Catalytic inks with ca. 40 wt.% Nafion and 12 wt.% 4VP as ionomers provided the best electrochemical response and cohesion of the catalysts, minimizing the losses in the electroactivity of the copper species.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Plasmon-driven catalysis of adsorbed p-nitroaniline (PNA) by surface-enhanced Raman scattering (SERS): Platinum versus silver

  • Vidal-Iglesias, Francisco J.
  • Juan Juan, Jerónimo
  • Such-Basañez, Ion
  • Solla-Gullón, José
  • Pérez Martínez, Juan Manuel
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The adsorption of p-nitroaniline (PNA) on Pt nanoparticles, both in the absence (in aqueous solution) and in the presence of oxygen (in air environment), is studied by SERS for the first time. Differences between the plasmon-driven catalysis of adsorbed PNA on Pt and Ag nanoparticles have been found. In the presence of oxygen, the oxidative coupling of the NH2 group in PNA to yield dinitroazobenzene (DNAB) occurs on both Pt and Ag nanoparticles. However, in the absence of oxygen, PNA behaves clearly differently on Ag than on Pt. Thus, whereas diaminoazobenzene (DAAB) is catalytically produced on Ag nanoparticles by plasmon-driven reduction reactions of the NO2 group, on Pt nanoparticles this reaction does not fully take place as indicated by the presence of NO2 groups on the surface of the nanoparticles. A mechanism for this distinctive behavior is tentatively proposed in which water acts as a sacrificial agent, being reduced to hydrogen by hot electrons coming from the Pt surface, while the hot holes on Pt are proposed to attach to an occupied molecular state of adsorbed PNA. The overall photocatalytic reaction of adsorbed PNA on Pt nanoparticles, in an O2 free solution, would actually be consistent with a dehydrogenation process of water.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Electrocatalytic studies on imidazolium based ionic liquids: defining experimental conditions

  • Montiel, Miguel A.
  • Solla-Gullón, José
  • Montiel, Vicente
  • Sánchez-Sánchez, Carlos M.
  • Montiel, Miguel A.|||/items/a285f8f2-9444-460d-bab6-4da82cbf2f6c
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The number of publications devoted to studying electrochemical reactions in room temperature ionic liquids (RTILs) is constantly growing, but very few of them have been devoted to defining proper experimental conditions to obtain reproducible electrochemical results. In this work, we demonstrate that the combination of a proper RTIL purification treatment and a filtered Ar gas stream allow us to obtain featureless voltammograms in [C4mim][BF4], [C4mim][NTf2], and [C4m2im][NTf2], which otherwise present signals associated with different types of impurities such as water and some minor electroactive impurities acquired during the RTIL synthesis process. Moreover, we demonstrate that bubbling Ar, or another inert gas, through the electrolyte in order to purge O2 dissolved in RTILs is one of the major sources of water and O2 impurities incorporated in RTILs within the electrochemical cell. To overcome this source of water uptake, we have incorporated a gas stream purification filter before the gas reaches the RTIL in the electrochemical cell. To illustrate the effect of these impurities in relevant electrocatalytic studies, we study the electrocatalytic reduction of CO2 on Pt nanoparticles and the key role of an appropiate filter when the CO2 gas stream is bubbled within imidazolium based RTILs. Our cyclic voltammetric studies point out that CO2 electroreduction on Pt nanoparticles only presents activity in [C4mim][NTf2] and [C4m2im][NTf2], thus suggesting that the C-2 position on the imidazolium ring is not the key position in CO2 electrochemical reduction. In contrast, the same Pt nanoparticles are inactive towards CO2 electroreduction in [C4mim][BF4], which is a more hydrophilic RTIL.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of confinement of horse heart cytochrome c and formate dehydrogenase from Candida boidinii on mesoporous carbons on their catalytic activity

  • Hernández Ibáñez, Naiara
  • Montiel, Vicente
  • Gomis Berenguer, Alicia
  • Ovín Ania, María Concepción
  • Iniesta, Jesus
This study reports the immobilization of two biocatalysts (e.g., cytochrome c—Cyt c—and the non-metalloenzyme formate dehydrogenase from Candida boidinii–cbFDH) on a series of mesoporous carbons with controlled pore sizes. The catalytic activity of the nanoconfined proteins was correlated with the pore size distribution of the carbon materials used as supports. The electrochemical behaviour of nanoconfined Cyt c showed direct electron transfer electroactivity in pore sizes matching tightly the protein dimension. The pseudo-peroxidase activity towards H2O2 reduction was enhanced at pH 4.0, due to the protein conformational changes. For cbFDH, the reduction of CO2 towards formic acid was evaluated for the nanoconfined protein, in the presence of nicotinamide adenine dinucleotide (NADH). The carbons displayed different cbFDH uptake capacity, governed by the dimensions of the main mesopore cavities and their accessibility through narrow pore necks. The catalytic activity of nanoconfined cbFDH was largely improved, compared to its performance in free solution. Regardless of the carbon support used, the production of formic acid was higher upon immobilization with lower nominal cbFDH:NADH ratios., NHI. VM and JI thank MINICINN, Spain (projects CTQ2013-48280-C3-3-R and CTQ2016-76231-C2-2-R) for financial support. COA thanks the financial support of the European Research Council through a Consolidator Grant (PHOROSOL 684161)., Peer reviewed