Skip to main content

ESTRUCTURA INTERFACIAL Y REACTIVIDAD ELECTROQUIMICA

CTQ2016-76221-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 51
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Citrate adsorption on gold: Understanding the shaping mechanism of nanoparticles

  • Gisbert-González, José M.
  • Cheuquepán, William
  • Herrero, Enrique
  • Feliu, Juan M.
  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
[EN] Advanced applications of colloidal nanoparticles (NPs) become to depend on their specific shape, which is controlled by the adsorption behavior of the capping agent involved in their synthesis. To understand the way in which citric acid determines the shape of gold NPs, the adsorption behavior of citrate on gold under the synthesis conditions is here investigated from electrochemical experiments on well-defined surfaces. Gibb excesses and charge numbers for the citrate adlayers deposited on the Au (111), Au(100) and Au(110) electrodes when a potential is applied were estimated at pHs 1 and 3. From these results, FTIR spectra and DFT calculations, it is concluded that solvated citrate can become simultaneously adsorbed through three dehydrogenated carboxylic groups in bidentate configuration on Au(111), but only through two on Au(100) and Au(110). As a result of this behavior, citrate can become more strongly adsorbed on Au(111) than on the other two basal planes of gold under the synthesis conditions, which would explain why tetrahedral and octahedral colloidal gold NPs are preferentially shaped when citric acid is used as the capping agent in water. This conclusion coincides with the previously one obtained on platinum, suggesting that the mechanism here described would operate also on other metals having fcc structure., This work has been financially supported by the MCINN-FEDER (Spain) through project CTQ2016-76221-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Why nitrogen favors oxygen reduction on graphitic materials

  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
  • Herrero, Enrique
[EN] Nitrogen-doped graphitic materials as promising catalysts for the oxygen reduction reaction in fuel-cells have been mainly investigated under the graphitic versus pyridinic nitrogen-dopant dichotomy approach. However, we show here that the active sites, reaction mechanism, selectivity and even the origin of each behavior can be better understood when the stability of the possible active site and the eventual contribution of charge from the surface are considered separately. The roles in the reaction played by specific nitrogen-dopants, the hydrogenation of pyridinic nitrogen-dopants and the solvation effect are all clarified. The investigated activity is much more closely linked to the edges, where certain carbon atoms are sufficiently unstable or can be destabilized by means of adjacent nitrogen-dopants, and where reaction intermediates can be better relaxed, than to the presence of specific nitrogen-dopants. Unfortunately, high overpotentials and the undesired production of hydrogen peroxide appear to be unavoidable in the oxygen reduction to water on these materials., This work has been financially supported by the MINECO (Spain) project No. CTQ2016-76221-P
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Why the activity of the hydrogen oxidation reaction on platinum decreases as pH increases

  • Briega-Martos, Valentín
  • Herrero, Enrique
  • Feliu, Juan M.
  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
[EN] Platinum is a very effective electrode for the hydrogen evolution and oxidation reactions (HER/HOR) in acidic media. However, the activity for the HOR on platinum falls two orders of magnitude from acidic to alkaline media, which has not been completely understood yet. Here, we provide an explanation for that. Both the HER and the HOR were investigated on the three basal planes of platinum in a pH range near neutral pH conditions in buffered solutions in the absence of anion specific adsorption for guaranteeing the protons availability. Whereas changes in the pH from acid to neutral values produced negligible effects on the HER, the HOR was found to be pH sensitive, even under near neutral pH conditions. From these results, it can be consistently reasoned that the drastic fall in the activity of the HOR on platinum from acidic to alkaline media is an effect of the charge on the electrode, which is more negative as the pH increases. With the aid of density functional theory calculations, kinetic arguments explaining the unfavorable effect that negative charge on the electrode has on the HOR are provided., This work was supported by the MCINN-FEDER (Spain) through Project CTQ2016-76221-P. V.B.-M. thankfully acknowledges to MINECO the award of a predoctoral grant (BES-2014-068176, Project CTQ2013-44803-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Why Citrate Shapes Tetrahedral and Octahedral Colloidal Platinum Nanoparticles in Water

  • Gisbert-González, J.M.
  • Feliu, Juan
  • Herrero, Enrique
  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
[EN] The performance of many advanced catalytic systems depends not only on the size and composition but also on the specific shape of the metal nanoparticles (NPs) from which they are assembled. In turn, the shape of colloidal NPs depends on the specific capping agent involved in their synthesis, though the mechanism is still poorly understood. Here, supported by electrochemical experiments, Fourier transform infrared spectra, and density functional theory calculations, on well-defined surfaces, we show how a specific capping agent determines the shape of colloidal NPs. Solvated citrate can become simultaneously adsorbed on the Pt(111) surface through three dehydrogenated carboxylic groups, with each one of them in bidentate configuration. On the other two basal planes, citrate can be adsorbed through only two of them. For this reason, under the synthesis conditions, citrate is more favorably adsorbed on the Pt(111) than on the other two basal planes of platinum. This adsorption behavior explains why colloidal platinum NPs of tetrahedral and octahedral shape are produced when citrate is used as the capping agent in water. The mechanism for citrate would also determine the shape of other pure face-centered cubic metals and can inspire the engineering of future capping agents., This work has been financially supported by the MCINN-FEDER (Spain) through project CTQ2016-76221-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Formic acid oxidation on platinum electrodes: A detailed mechanism supported by experiments and calculations on well-defined surfaces

  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
  • Perales, Juan Víctor
  • Buso-Rogero, Carlos
  • Feliu, Juan
  • Herrero, Enrique
[EN] In spite of the fact that the formic acid oxidation reaction on electrode surfaces has been extensively investigated, a detailed mechanism explaining all the available experimental evidence on platinum has not been yet described. Herein, using a combined experimental and computational approach, the key elements in the mechanism of the formic acid oxidation reaction on platinum have been completely elucidated, not only for the direct path, through an active intermediate, but also for the CO formation route. The experimental results suggest that the direct oxidation path on platinum takes place in the presence of bidentate adsorbed formate. However, the results reported here provide evidence that this species is not the active intermediate. Monodentate adsorbed formate, whose evolution to the much more favorable bidentate form would be hindered by the presence of neighboring adsorbates, has been found to be the true active intermediate. Moreover, it is found that adsorbed formic acid would have a higher acid constant than in solution, which suggests that adsorbed formate can be originated not only from solution formate but also from formic acid. The CO formation path on platinum can proceed, also from monodentate adsorbed formate, through a dehydrogenation process toward the surface, during which the adsorbate transitions from a Pt-O adsorption mode to a Pt-C one, to form carboxylate. From this last configuration, the C-OH bond is cleaved, on the surface, yielding adsorbed CO and OH. The results and mechanisms reported here provide the best explanation for the whole of the experimental evidence available to date about this reaction, including pH, surface structure and electrode potential effects., This work has been financially supported by the MCINN-FEDER (Spain) and Generalitat Valenciana (Feder) through projects CTQ2016-76221-P and PROMETEOII/2014/013, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The role of formic acid/formate equilibria in the oxidation of formic acid on Pt(111)

  • Busó-Rogero, Carlos
  • Herrero, Enrique
  • Feliu, Juan M.
  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
[EN] The formic acid oxidation reaction has been studied in concentrated perchloric acid solutions (up to 9.14M (60%)) on the Pt (111) surface to explore the relationships between interfacial properties and kinetics. It is found that, as the concentration of perchloric acid in the supporting electrolyte increases, the current markedly decreases, making it possible to detect adsorbed formate on the surface by voltammetric methods. With the aid of DFT calculations, it is shown that the diminution in current is the result of two opposing factors: the reduction in the concentration of free formate in solution and electrode charge effects which encourage the adsorption of formate in a particular configuration. Additionally, the electrochemical behavior under highly acidic conditions suggests the formation of clathrate structures and emphasizes the relevance of the water structure effect in electrode adsorption processes., This work has been financially supported by the Ministerio de Economia, Industria y Competitividad through the project CTQ2016-76221-P. CBR also thanks his Postdoctoral fellowship to Generalitat Valenciana (APOSTD/2017/010).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An Aza-Fused pi-Conjugated Microporous Framework Catalyzes the Production of Hydrogen Peroxide

  • Briega-Martos, V.
  • de la Peña, Alejandro
  • Segura, J.L.
  • Zamora, F.
  • Feliu, Juan
  • Herrero, Enrique
  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
[EN] In order to produce hydrogen peroxide in small-scale electrochemical plants, selective catalysts for the oxygen reduction reaction (ORR) toward the desired species are required. Here, we report about the synthesis, characterization, ORR electrochemical behavior, and reaction mechanism of an aza-fused pi-conjugated microporous polymer, which presents high selectivity toward hydrogen peroxide. It was synthesized by polycondensation of 1,2,4,5-benzenetetramine tetrahydrochloride and triquinoyl octahydrate. A cobalt-modified version of the material was also prepared by a simple postsynthesis treatment with a Co(II) salt. The characterization of the material is consistent with the formation of a conductive robust porous covalent laminar polyaza structure. The ORR properties of these catalysts were investigated using rotating disk and rotating disk ring arrangements. The results indicate that hydrogen peroxide is almost exclusively produced at very low overpotentials on these materials. Density functional theory calculations provide key elements to understand the reaction mechanism. It is found that, at the relevant potential for the reaction, half of the nitrogen atoms of the material would be hydrogenated. This hydrogenation process would destabilize some carbon atoms in the lattice and would provide segregated charge. On the destabilized carbon atoms, molecular oxygen would be chemisorbed with the aid of charge transferred from the hydrogenated nitrogen atoms and solvation effects. Due to the low destabilization of the carbon sites, the resulting molecular oxygen chemisorbed state, which would have the characteristics of a superoxide species, would be only slightly stable, promoting the formation of hydrogen peroxide., This work has been financially supported by the MCINN-FEDER (projects CTQ2016-76221-P, MAT2013-46753-C2-1-P, and MAT2014-52305-P) and Generalitat Valenciana (project PROMETEO/2014/013).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Copper underpotential deposition at gold surfaces in contact with a deep eutectic solvent: New insights

  • Sebastián, Paula
  • Gómez, Elvira
  • Climent, Victor
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
The electrodeposition of copper on a polycrystalline gold electrode and on Au(hkl) single crystals was investigated in a deep eutectic solvent (DES). The DES employed consisted of a mixture of choline chloride and urea (1:2). The Au(hkl)/DES interface was studied using cyclic voltammetry in the capacitive region. The blank voltammograms showed characteristic features, not previously reported, that demonstrate the surface sensitivity of this solvent. Copper electrodeposition was then studied and it was found that this takes place through the formation of an underpotential deposition (UPD) adlayer, demonstrating the surface sensitivity of this process. Voltammetric profiles showed similarities with those obtained in aqueous solutions containing chloride, suggesting that the copper UPD in this DES is strongly influenced by the presence of chloride.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Stark effect or coverage dependence? Disentangling the EC-SEIRAS vibrational shift of sulfate on Au(111)

  • Pfisterer, Jonas H.K.
  • Zhumaev, Ulmas E.
  • Cheuquepán, William
  • Feliu, Juan M.
  • Domke, Katrin F.
Infrared spectroscopy is a widely employed analytical tool in (electrochemical) surface science as the spectra contain a wealth of information about the interaction of interfacial adsorbates with their environment. Separating and quantifying individual contributions, for example, of co-adsorbates, the substrate or electric field effects, on the overall spectral response, however, is often non-trivial as the various interactions manifest themselves in similar spectral behavior. Here, we present an experimental approach to differentiate between and quantify potential-induced coverage dependence and field-related Stark effects observed in a sulfate band shift of 93.5 ± 1.5 cm−1/V in electrochemical infrared spectra of the showcase sulfate/Au(111) interface. In combination with a simple linear model equation used to describe the potential-induced peak shift of the sulfate stretch vibration, we determine the coverage dependence contribution to be 15.6 ± 1.2 cm−1/θSO and the Stark effect to amount to 75.6 ± 2.7 cm−1/V. Our work provides a novel route to gain fundamental insight into interfacial adsorbate interactions in electrochemical surface science.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Peroxodisulfate reduction on platinum stepped surfaces vicinal to the (110) and (100) poles

  • Martínez-Hincapié, Ricardo
  • Climent, Victor
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
The reduction of peroxodisulfate anion at stepped platinum single crystal electrodes vicinal to the (110) and (100) poles has been investigated using cyclic voltammetry. Particular emphasis is made in understanding the effect of the cooling atmosphere used after the flame annealing. Two cooling atmospheres have been used: H2/Ar and CO. The cooling procedure has a significant influence on the reactivity obtained with the stepped surfaces belonging to both crystallographic zones. For the surfaces composed of (110) terraces and (111) or (100) steps cooled in H2/Ar, only one peroxodisulfate reduction peak is observed. On the contrary, for the same surfaces cooled in CO, more than one peak is observed for wide terraces. For surfaces vicinal to the pole (100), the cooling in CO atmosphere seems to produce a surface with higher order than those cooled in H2/Ar. The implications of the results on the understanding of the local distribution of charges at heterogeneous surfaces are discussed, identifying local values of the potential of zero charge. Those results are compared, when possible, with results obtained with other techniques.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Interfacial Study of Nickel‐Modified Pt(111) Surfaces in Phosphate‐Containing Solutions: Effect on the Hydrogen Evolution Reaction

  • Sarabia, Francisco J.
  • Climent, Victor
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
The surface modification of electrodes attracts great interest in electrocatalysis. It has often been observed that deposition of foreign adatoms on the surface of an electrode can originate a significant enhancement in the catalytic activity. For example, it has been reported that nickel deposits on Pt surfaces improve the rate of the hydrogen evolution reaction (HER, Nature Energy 2017, 2, 17031). During the deposition process of such metal adlayers, the pH and the nature of the ions in the electrolyte play an important role. Phosphate species are typically used to prepare buffer solutions in a wide range of pH. Therefore, electrolytes containing phosphate species are used in a large number of applications. However, the effect of phosphate on platinum surface modification with nickel deposits has not been studied yet. In this work, new data about the interaction of phosphate with nickel adatoms deposited on Pt(111) at pH 5 is investigated using cyclic voltammetry and infrared spectroscopy. The results show that, when nickel is in solution, the phosphate ions are adsorbed at lower potentials than in the absence of nickel. In addition, Laser‐Induced Temperature Jump Technique demonstrates that nickel facilitates the adsorption of phosphate because of a shift of the potential of zero charge (pzc) toward negative potentials. This increases the magnitude of the positive electric field on the electrode surface, at a given potential E>pzc, facilitating the adsorption of anions. CO displacement technique has been also employed to obtain additional information about co‐adsorbed phosphate on nickel adlayers. Finally, the HER has been studied at pH 5 in the presence of nickel, with and without phosphate in the bulk solution.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Surface Sensitive Nickel Electrodeposition in Deep Eutectic Solvent

  • Sebastián, Paula
  • Giannotti, Marina Inés
  • Gómez, Elvira
  • Feliu, Juan M.
The first steps of nickel electrodeposition in a deep eutectic solvent (DES) are analyzed in detail. Several substrates from glassy carbon to Pt(111) were investigated pointing out the surface sensitivity of the nucleation and growth mechanism. For that, cyclic voltammetry and chronoamperometry, in combination with scanning electron microscopy (SEM), were employed. X-ray diffraction (XRD) and atomic force microscopy (AFM) were used to more deeply analyze the Ni deposition on Pt substrates. In a 0.1 M NiCl2 + DES solution (at 70 °C), the nickel deposition on glassy carbon takes place within the potential limits of the electrode in the blank solution. Although, the electrochemical window of Pt|DES is considerably shorter than on glassy carbon|DES, it was still sufficient for the nickel deposition. On the Pt electrode, the negative potential limit was enlarged while the nickel deposit grew, likely because of the lower catalytic activity of the nickel toward the reduction of the DES. At lower overpotentials, different hydrogenated Ni structures were favored, most likely because of the DES co-reduction on the Pt substrate. Nanometric metallic nickel grains of rounded shape were obtained on any substrate, as evidenced by the FE-SEM. Passivation phenomena, related to the formation of Ni oxide and Ni hydroxylated species, were observed at high applied overpotentials. At low deposited charge, on Pt(111) the AFM measurements showed the formation of rounded nanometric particles of Ni, which rearranged and formed small triangular arrays at sufficiently low applied overpotential. This particle pattern was induced by the ⟨111⟩ orientation and related to surface sensitivity of the nickel deposition in DES. The present work provides deep insights into the Ni electrodeposition mechanism in the selected deep eutectic solvent.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Adsorbed Formate is the Last Common Intermediate in the Dual-Path Mechanism of the Electrooxidation of Formic Acid

  • Betts, Alexander
  • Briega-Martos, Valentín
  • Cuesta, Angel
  • Herrero, Enrique
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
We report a study using Pt(111) and Pt(100) electrodes of the role of adsorbed formate in both the direct and indirect pathways of the electrocatalytic oxidation of formic acid. Cyclic voltammetry at different concentrations of formic acid and different scan rates and pulsed voltammetry were used to obtain a deeper insight into the effect of formate coverage on the rate of the direct pathway. Pulsed voltammetry also provided information on the effect of the concentration of formic acid on the rate of the formation of adsorbed CO on Pt(100). At low to medium coverage, increasing formate coverage increases the rate of its direct oxidation, suggesting that decreasing the distance between neighboring bidentate-adsorbed formate favors its interconversion to and/or stabilizes monodentate formate (the reactive species). However, increasing the formate coverage beyond approximately 50% results in a decrease of the rate of the direct oxidation, probably because bidentate formate is too closely packed for its conversion to monodentate formate to be possible. Cyclic voltammetry at very high scan rates reveals the presence of an order–disorder phase transition within the bidentate formate adlayer on Pt(111) when the coverage approaches saturation. The dependence of the potential of the maximum rate of dehydration to adsorbed CO, and of the rate at the maximum, on the concentration of formic acid is in good agreement with predictions made for a mechanism, in which adsorbed CO is formed through the adsorption of formate followed by its reduction to adsorbed CO, thus confirming that monodentate-adsorbed formate is the last intermediate common to both the direct and indirect pathways.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

The Role of Adsorption in the Electrocatalysis of Hydrazine on Platinum Electrodes

  • Gisbert, Rubén
  • Boronat-González, Ana
  • Feliu, Juan M.
  • Herrero, Enrique
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
Hydrazine oxidation on platinum single-crystal electrodes has been studied in acidic solution containing different electrolytes. It will be shown that the hydrazinium cation is adsorbed on platinum through an anodic reaction. Moreover, in the presence of chloride, this adsorption process is favored owing to the formation of an ionic pair with adsorbed chloride. In spite of the enhanced adsorption of hydrazine species in the presence of chloride, higher overpotentials are measured in these media, which reveals that the oxidation of hydrazine not only requires adsorption, but also that the adsorption mode of the species facilitates the formation of the transition state to yield the final product.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Oxygen reduction at platinum electrodes: The interplay between surface and surroundings properties

  • Gómez Marín, Ana María
  • Feliu, Juan M.
In this work, recent progress in the understanding of the mechanism of the oxygen reduction reaction at Pt surfaces is shortly reviewed. Specifically, the presence of a soluble and short-lived intermediate different to H2O2 in the ORR reaction path and the interrelated effect between the surface arrangement, adsorption of oxygen-containing species and water structure in the ORR reactivity in acid environments are discussed. Besides, the influence of the proton concentration on the ORR product distribution, the existence of a chemical step and the possible role of the soluble intermediate as a bifurcation point in the mechanism are also analyzed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Glycerol electrooxidation on Pd modified Au surfaces in alkaline media: Effect of the deposition method

  • Mello, Gisele A.B.
  • Busó-Rogero, Carlos
  • Herrero, Enrique
  • Feliu, Juan M.
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
The catalytic effect of Pd on gold electrodes for glycerol oxidation is evaluated for Pd-Au surfaces prepared using three different methods: irreversible adsorption of palladium by a simple immersion of a gold electrode in palladium solution, the deposition of palladium on the gold substrate by a step potential from 1 to 0.75 V, and the forced deposition of palladium on the gold electrode with the help of a reducing hydrogen atmosphere. Voltammetry has been used for the electrochemical characterization of the Pd-Au deposits and to determine its reactivity towards glycerol oxidation, whereas FTIR experiments have allowed detecting adsorbed species and products formed during the oxidation reaction. Pd-Au surfaces prepared by irreversible adsorption are the electrodes that show the highest activity for the glycerol complete oxidation to carbonate, whereas Pd-Au surfaces made by the step potential are the catalyst that exhibits the highest rate for the formation and adsorption CO before carbonate production, poisoning the surface and diminishing their electrocatalytic properties. In addition to carbonate, glycerate, glycolate, and formate are detected as oxidation products. The integrated bands of the spectra are used to give quantitative information for comparing the product distribution of the different Pd-Au deposits prepared.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Electroreduction of Oxygen on PdPt Alloy Nanocubes in Alkaline and Acidic Media

  • Jukk, Kristel
  • Kongi, Nadezda
  • Tammeveski, Kaido
  • Solla-Gullón, José
  • Feliu, Juan M.
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The electrochemical kinetic behavior of the oxygen reduction reaction (ORR) on PdPt alloy nanocubes of various compositions is investigated in 0.1 M KOH and 0.1 M HClO4 solutions, adopting the rotating disk electrode (RDE) configuration. The PdPt nanocubes are prepared in the presence of polyvinylpyrrolidone and identified by using transmission electron microscopy (TEM). TEM images reveal that the PdPt alloy nanoparticles have a preferential cubic shape and the average particle size is approximately 8–10 nm. CO-stripping and cyclic voltammetry (CV) experiments are used for electrochemical cleaning and characterization of metal nanoparticles. The CV responses indicate alloy formation. In acidic media, Pd36Pt64 shows the highest specific activity (SA) for the ORR from the alloyed catalysts studied, but this activity is similar to that found with Pt and Pd nanocubes. However, in alkaline solution, the SA value for Pd72Pt28 is about two times higher than that of Pd and Pt nanocubes. The mechanistic pathway of O2 reduction on PdPt alloy nanocubes is analogous to that of pure Pd and Pt catalysts and the ORR proceeds via a 4-electron pathway in both electrolyte solutions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Pt-grown carbon nanofibers for detection of hydrogen peroxide

  • Isoaho, Noora
  • Sainio, Sami
  • Wester, Niklas
  • Botello, Luis
  • Johansson, Leena-Sisko
  • Peltola, Emilia
  • Climent, Victor
  • Feliu, Juan M.
  • Koskinen, Jari
  • Laurila, Tomi
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
Removal of left-over catalyst particles from carbon nanomaterials is a significant scientific and technological problem. Here, we present the physical and electrochemical study of application-specific carbon nanofibers grown from Pt-catalyst layers. The use of Pt catalyst removes the requirement for any cleaning procedure as the remaining catalyst particles have a specific role in the end-application. Despite the relatively small amount of Pt in the samples (7.0 ± 0.2%), they show electrochemical features closely resembling those of polycrystalline Pt. In O2-containing environment, the material shows two separate linear ranges for hydrogen peroxide reduction: 1–100 μM and 100–1000 μM with sensitivities of 0.432 μA μM−1 cm−2 and 0.257 μA μM−1 cm−2, respectively, with a 0.21 μM limit of detection. In deaerated solution, there is only one linear range with sensitivity 0.244 μA μM−1 cm−2 and 0.22 μM limit of detection. We suggest that the high sensitivity between 1 μM and 100 μM in solutions where O2 is present is due to oxygen reduction reaction occurring on the CNFs producing a small additional cathodic contribution to the measured current. This has important implications when Pt-containing sensors are utilized to detect hydrogen peroxide reduction in biological, O2-containing environment.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Mobility and Oxidation of Adsorbed CO on Shape-Controlled Pt Nanoparticles in Acidic Medium

  • Farias, Manuel J.S.
  • Busó-Rogero, Carlos
  • Vidal-Iglesias, Francisco J.
  • Solla-Gullón, José
  • Camara, Giuseppe A.
  • Feliu, Juan M.
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The knowledge about how CO occupies and detaches from specific surface sites on well-structured Pt surfaces provides outstanding information on both dynamics/mobility of COads and oxidation of this molecule under electrochemical conditions. This work reports how the potentiostatic growth of different coverage CO adlayers evolves with time on both cubic and octahedral Pt nanoparticles in acidic medium. Data suggest that during the growth of the CO adlayer, COads molecules slightly shift toward low coordination sites only on octahedral Pt nanoparticles, so that these undercoordinated sites are the first filled on octahedral Pt nanoparticles. Conversely, on cubic Pt nanoparticles, adsorbed CO behaves as an immobile species, and low coordinated sites as well as (100) terraces are apparently filled uniformly and simultaneously. However, once the adlayer is complete, irrespectively of whether the CO is oxidized in a single step or in a sequence of different potential steps, results suggest that COads behaves as an immobile species during its oxidation on both octahedral and cubic Pt nanoparticles.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Spectroelectrochemical and Density Functional Theory Study of Squaric Acid Adsorption and Oxidation at Gold Thin Film and Single Crystal Electrodes

  • Cheuquepán, William
  • Rodes, Antonio
  • Orts, José M.
  • Feliu, Juan M.
  • Orts, José M.|||/items/ccc73a25-76fa-4f15-bfd7-33f3ab2771bd
  • Rodes, Antonio|||/items/0498f81b-f1a5-4f48-bee3-357d1a2c65e6
The adsorption and oxidation of squaric acid (H2C4O4, H2SQ) at gold single crystal and thin-film electrodes with preferential (111) orientation were studied spectroelectrochemically in perchloric acid solutions. The existence of reversible adsorption–desorption processes in the double-layer region is reflected by structure-sensitive voltammetric features. Infrared reflection absorption spectroscopy experiments carried out with Au(111) and Au(100) single-crystal surfaces in 10 mM H2SQ solutions show potential-dependent adsorbate bands at ca. 1780–1785 and 1511–1577 cm–1 for potentials below 1.00 V RHE. The increasing sensitivity of the attenuated total reflection (ATR)–surface-enhanced infrared reflection absorption (SEIRA) experiments allows the detection of similar features for much lower H2SQ concentrations. According to density functional theory (DFT) calculations, these bands can be assigned to adsorbed squarate anions which are bonded to the gold surfaces in a bidentate configuration through two oxygen atoms, with the molecular plane perpendicular to the metal surface. For 10 mM H2SQ solutions, additional bands are detected in the ATR–SEIRA spectra at ca. 1630 cm–1 both in water and deuterium oxide solutions. Even if this frequency fits with one of the vibrational modes of adsorbed bisquarate, DFT calculations provide an alternative explanation for this potential-dependent feature that could be ascribed to collective vibrational modes of adsorbed squarate appearing at high adsorbate coverage. The existence of in-phase and out-of-phase contributions under these conditions would also explain the broadening and/or splitting of the observed bands. DFT calculations also show that squaric acid molecules adsorb very weakly at the gold surfaces and can be discarded as the origin of the observed infrared bands. The external reflection infrared spectra obtained for gold single-crystal electrodes in the H2SQ oxidation region show bands for dissolved carbon dioxide molecules as the main product. Bands for adsorbed bicarbonate anions formed from carbon dioxide are detected in the ATR–SEIRA spectra.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Glucose electro-oxidation on Pt(100) in phosphate buffer solution (pH 7): A mechanistic study

  • Mello, Gisele A.B.
  • Cheuquepán, William
  • Briega-Martos, Valentín
  • Feliu, Juan M.
Glucose is an important biomolecule that participates as a main source of energy in living organism reactions. Considering its biological importance, the electrochemical investigation about glucose electro-oxidation has attracted attention with the aim to develop non-enzymatic catalysts able to achieve the complete oxidation of glucose to be used as fuel in Direct Glucose Fuel Cells (DGFC). However, there are some challenges related to the oxidation of this relatively large, complex molecule, such as product distributions, adsorbed species, surface poisoning and structure sensitivity that must be understood. The use of well-defined surfaces, as single crystals, is a helpful tool to progress in this knowledge. In this context, the goal of this manuscript is the elucidation of the glucose electro-oxidation reaction in phosphate buffered solution (pH 7) on Pt(100) using cyclic voltammetry and in situ FTIR techniques at room temperature. It was observed that the reaction product distribution depends on glucose concentration. The maximum current density was reached with 2 × 10−2 mol dm−3 glucose (~2.04 mA cm−2) and then decreases with the increase of glucose concentration, because the reaction becomes dominated by the formation of strongly adsorbed species. In situ FITR experiments on Pt(100) show that the reaction proceeds through a complex mechanism, involving CO2, COL, COB, cyclic carbonate, γ-lactone, δ-lactone and carboxylic acids as intermediates and/or oxidation products. CO2 is generated mainly from COB and cyclic carbonate. Adsorbed CO seems to be the poisoning species responsible of the decrease of the catalytic activity on Pt(100), especially in the linear configuration, at higher glucose concentration.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Study of the Pt (111) | electrolyte interface in the region close to neutral pH solutions by the laser induced temperature jump technique

  • Sebastián, Paula
  • Martínez-Hincapié, Ricardo
  • Climent, Victor
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
The laser-induced temperature jump method is used to determine the potential of maximum entropy (pme) of a Pt(111) single crystal electrode in contact with an aqueous solution, in a wide pH range and in the absence of specifically adsorbed anions. For this purpose, buffer solutions composed of a mixture of NaF and HClO4 are used. The results are compared with those from non-buffered perchlorate solutions. The use of the NaF/HF buffer allows extending the pH range from 3 to 6, approaching the situation of a neutral pH. Laser experiments show that the pme appears located at nearly the same potential position in the whole pH range between 3 and 6. This value is around 300 mV vs SHE, in agreement with previous works. Moreover, the potential response to the fast thermal perturbation at high potentials, above the pme, indicates the presence of a slower contribution, resulting in a bipolar, non-monotonous, profile. Such behaviour is strongly affected by the presence of fluoride anion and/or hydrofluoric acid, thus evidencing a strong structural effect on interfacial water from these species. These results bring some light to the understanding of the interfacial properties in acid-neutral conditions, and also show the influence of different non-specifically adsorbed anions on the interfacial properties that cannot be evidenced only by cyclic voltammetry.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Single Crystal Electrochemistry as an In Situ Analytical Characterization Tool

  • Climent, Victor
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
The electrochemical behavior of platinum single crystal surfaces can be taken as a model response for the interpretation of the activity of heterogeneous electrodes. The cyclic voltammogram of a given platinum electrode can be considered a fingerprint characteristic of the distribution of sites on its surface. We start this review by providing some simple mathematical descriptions of the voltammetric response in the presence of adsorption processes. We then describe the voltammogram of platinum basal planes, followed by the response of stepped surfaces. The voltammogram of polycrystalline materials can be understood as a composition of the response of the different basal contributions. Further resolution in the discrimination of different surface sites can be achieved with the aid of surface modification using adatoms such as bismuth or germanium. The application of these ideas is exemplified with the consideration of real catalysts composed of platinum nanoparticles with preferential shapes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Investigation of the interfacial properties of platinum stepped surfaces using peroxodisulfate reduction as a local probe

  • Martínez-Hincapié, Ricardo
  • Climent, Victor
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
Peroxodisulfate (PDS) reduction has been investigated by electrochemical and FTIR techniques in a wide pH range, on platinum stepped single crystals electrodes vicinal to the (111) pole. PDS reduction is a structure-sensitive reaction and proceeds on well differentiated potential regions for terrace and step sites. This fact allows gaining local information about the individual behavior of those sites. The reaction proceeds at appreciable rate in a narrow potential range, being inhibited in the low and high potential regions of the voltammogram. The inhibition of the reaction at low potentials is most likely associated with a change in the sign of the charge on the electrode, from positive to negative. Therefore, PDS reduction gives an approximate indication of the position of the potential of zero free charge (pzfc). In this way, two local values of pzfc, associated with terrace and steps sites, can be determined. Such values of local pzfc are compared with the local values of potential of maximum entropy (pme) of double layer formation deduced from laser induced T-jump experiment. Good agreement between both magnitudes is found, especially for terraces. The local pzfc on terraces shifts to more positive potentials as the terrace length diminishes, while the local pzfc for steps remains constant. The inhibition of PDS reduction at high potentials can also be related with a second inversion in the sign of the electrode charge. Therefore, PDS reduction can be used to determine a second pzfc on the (111) terraces at high potentials, revealing a non-monotonic charge – potential relationship. Spectroscopic experiments allow the identification of the species involved in PDS reduction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Determination of Specific Electrocatalytic Sites in the Oxidation of Small Molecules on Crystalline Metal Surfaces

  • Farias, Manuel J.S.
  • Feliu, Juan M.
The identification of active sites in electrocatalytic reactions is part of the elucidation of mechanisms of catalyzed reactions on solid surfaces. However, this is not an easy task, even for apparently simple reactions, as we sometimes think the oxidation of adsorbed CO is. For surfaces consisting of non-equivalent sites, the recognition of specific active sites must consider the influence that facets, as is the steps/defect on the surface of the catalyst, cause in its neighbors; one has to consider the electrochemical environment under which the “active sites” lie on the surface, meaning that defects/steps on the surface do not partake in chemistry by themselves. In this paper, we outline the recent efforts in understanding the close relationships between site-specific and the overall rate and/or selectivity of electrocatalytic reactions. We analyze hydrogen adsorption/desorption, and electro-oxidation of CO, methanol, and ammonia. The classical topic of asymmetric electrocatalysis on kinked surfaces is also addressed for glucose electro-oxidation. The article takes into account selected existing data combined with our original works.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Investigating interfacial parameters with platinum single crystal electrodes

  • Martínez-Hincapié, Ricardo
  • Sebastián, Paula
  • Climent, Victor
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
The concepts of total and free charge of platinum single crystal electrodes are revised in this paper, together with the associated concepts of potential of zero total and free charge. Total charges can be measured from CO displacement method. Results on solution of different pH are described. A novel buffer composition is used to attain pH values close to neutrality while avoiding interferences from anion adsorption processes. Stress is made on the fact that free charges are not accessible through electrochemical measurement for systems at equilibrium since adsorption processes (hydrogen and hydroxyl) interfere with free charge determination. Still, a model is described that allows, under some assumptions, extract free charge values and the corresponding potential of zero free charge for Pt(111) electrodes. On the other hand, fast measurement outside equilibrium can separate free charges from adsorption processes based on their different time constant. In this way, the laser induced temperature jump experiment allows determination of the potential of maximum entropy, a magnitude that is intimately related with the potential of zero free charge. Values of the potential of maximum entropy as a function of pH are given for the different basal planes of platinum.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

On the quality and stability of preferentially oriented (100) Pt nanoparticles: An electrochemical insight

  • Arán-Ais, Rosa M.
  • Solla-Gullón, José
  • Herrero, Enrique
  • Feliu, Juan M.
  • Arán-Ais, Rosa M.|||/items/9120125e-5943-4754-ba84-7200ee3b8c85
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Previous knowledge shed by single crystal electrochemistry path the way to obtain better catalysts aiming fuel cell purposes. In this sense, tailoring shape-controlled nanoparticles has been a strategy followed over the past years to optimize the activity, selectivity and stability of electrocatalytic surface sensitive reactions by maximizing the exposure of certain facets of the nanocatalyst. In the present paper, preferentially oriented (100) nanoparticles synthesized by different methodologies have been electrochemically characterized and compared. The voltammetric profile of these cubic nanoparticles has also been compared with different platinum single crystal stepped surfaces, showing a singular fitting to the characteristic response of Pt(510). Subtle changes on the surface structure of platinum nanocubes due to surface degradation upon storage time in aqueous solution are pointed out in this work. The characteristic fingerprints of platinum surfaces and CO oxidation profiles have demonstrated to be powerful surface probes for the in situ detection of these minor structural reorganizations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Nitrate anion reduction in aqueous perchloric acid as an electrochemical probe of Pt{1 1 0}-(1 × 1) terrace sites

  • Attard, Gary A.
  • Souza-Garcia, Janaina
  • Martínez-Hincapié, Ricardo
  • Feliu, Juan M.
The electrochemical reduction of nitrate anions in aqueous 0.1 M perchloric acid has been studied using Pt(S)-[n{1 1 0} × {1 1 1}] and Pt(S)-[n{1 1 0} × {1 0 0}] single crystal electrodes. It is demonstrated that the presence of Pt{1 1 0} adsorption sites is associated with a single, broad nitrate reduction peak centred at 0.18 V (RHE). Moreover, depending on the cooling environment used after flame-annealing (CO, H2, Ar, air, nitrogen), the surface concentration of such sites varies which in turn regulates the nitrate reduction current density achievable for a given stepped Pt{h k l} electrode. The origin of this phenomenon is the propensity of the clean Pt{1 1 0} basal plane (and vicinal surfaces containing this plane) to reconstruct towards a stable (1 × 2) phase with strong CO chemisorption favouring formation of larger Pt{1 1 0}-(1 × 1) domains. In contrast, argon/air-cooling appears to promote the development of a largely (1 × 2) reconstructed surface which is much less active for nitrate reduction since the surface density of Pt{1 1 0}-(1 × 1) terrace sites is significantly diminished. Interestingly, hydrogen-cooling affords nitrate reduction activity intermediate between these two extremes. We suggest that under this particular preparation condition, a partially deconstructed (1 × 1) phase forms containing the “excess” 50% of surface atoms (originating from the (1 × 2) phase) sitting proud of the surface in the form of small (1 × 1) islands, together with residual (1 × 2) missing row regions. Hence, after hydrogen cooling, the nominal Pt{1 1 0} surface plane is speculated to exhibit a wider distribution of smaller terrace widths than found with CO cooling together with residual areas of (1 × 2). The weaker chemisorption of hydrogen apparently limits the size of the Pt{1 1 0}-(1 × 1) domains achievable and consequently, nitrate reduction activity is diminished. Based on these findings, it is proposed that nitrate reduction may be used as a quantitative electrochemical probe of Pt{1 1 0}-(1 × 1) sites at Pt nanoparticles in an analogous fashion to the method of ammonia electrooxidation presently used to quantify the surface abundance of Pt{1 0 0} sites.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effects of the Interfacial Structure on the Methanol Oxidation on Platinum Single Crystal Electrodes

  • Kamyabi, Mohammad Ali
  • Martínez-Hincapié, Ricardo
  • Feliu, Juan M.
  • Herrero, Enrique
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
Methanol oxidation has been studied on low index platinum single crystal electrodes using methanol solutions with different pH (1–5) in the absence of specific adsorption. The goal is to determine the role of the interfacial structure in the reaction. The comparison between the voltammetric profiles obtained in the presence and absence of methanol indicates that methanol oxidation is only taking place when the surface is partially covered by adsorbed OH. Thus, on the Pt(111) electrode, the onset for the direct oxidation of methanol and the adsorption of OH coincide. In this case, the adsorbed OH species are not a mere spectator, because the obtained results for the reaction order for methanol and the proton concentrations indicate that OH adsorbed species are involved in the reaction mechanism. On the other hand, the dehydrogenation step to yield adsorbed CO on the Pt(100) surface coincides with the onset of OH adsorption on this electrode. It is proposed that adsorbed OH collaborates in the dehydrogenation step during methanol oxidation, facilitating either the adsorption of the methanol in the right configuration or the cleavage of the C—H bond.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

In-situ STM and AFM Studies on Electrochemical Interfaces in imidazolium-based ionic liquids

  • Liu, Shuai
  • Peng, Jin
  • Chen, Li
  • Sebastián, Paula
  • Feliu, Juan M.
  • Yan, Jiawei
  • Mao, Bingwei
Voltammetric responses, adsorption behaviors and layered structures of 1-ethyl-2, 3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide (EMMITFSI) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMITFSI) at Au (111) have been investigated by cyclic voltammetry, in-situ STM and in-situ AFM force curve measurements, respectively. Cyclic voltammetry measurements pointed out that two pairs of sharp redox peaks are located at around 0.1 and 0.7 V in EMMITFSI, but not in EMITFSI. In-situ STM studies revealed no etching of the Au (111) surface in the investigated potential region in EMMITFSI, but an etched Au (111) surface was observed in EMITFSI in the same potential region, indicating that the interaction between EMITFSI and the Au (111) surface is much stronger than that between EMMITFSI and the Au (111) surface. In-situ AFM force curve measurements showed three layered structures at Au (111)/EMITFSI interface, but no force curves with saw-toothed feature can be obtained when the potential is higher than +0.5 V, which implies the disappearance of layered structures. In EMMITFSI, force curves with saw-toothed feature can be obtained even at +1.2 V. The fact that layered structures can form in a broader potential region indicates that a stronger interaction exists between the EMMI cation and the TFSI anion. It is inferred that the methylation of the hydrogen position provides a configuration for EMMI cations with an increased hydrophobic interaction, which maintains the layered structure in wider potential region. As a consequence, the electrode potential may induce structural transition of the layered structures, which is responsible for the origin of the voltammetric features.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

New probes to surface free charge at electrochemical interfaces with platinum electrodes

  • Martínez-Hincapié, Ricardo
  • Climent, Victor
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
The free charge is a key variable dominating the properties of the interphase between a metallic electrode and an electrolytic solution. However, its determination in the case of platinum electrodes is not straightforward. Here, we review some of the experimental and computational strategies that can be used to gain information about the free charge in these interphases. First, we discuss the influence of the free charge on some reactions of technological interest. Then, we demonstrate the usefulness of peroxodisulfate (PDS) reduction as a probe reaction sensitive to the free charge on platinum electrodes. The comparison with other strategies, based on either CO displacement, measurements of the potential of maximum entropy of the interphase or N2O reduction, validates the consistency of this approach. Finally, it is remarked how the use of PDS reduction as a surface probe evidences the existence of a non-monotonic behavior in the variation of the charge as a function of potential on platinum electrodes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Citrate adsorption on gold: Understanding the shaping mechanism of nanoparticles

  • Gisbert-González, José M.
  • Cheuquepán, William
  • Ferre-Vilaplana, Adolfo
  • Herrero, Enrique
  • Feliu, Juan M.
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
Advanced applications of colloidal nanoparticles (NPs) become to depend on their specific shape, which is controlled by the adsorption behavior of the capping agent involved in their synthesis. To understand the way in which citric acid determines the shape of gold NPs, the adsorption behavior of citrate on gold under the synthesis conditions is here investigated from electrochemical experiments on well-defined surfaces. Gibb excesses and charge numbers for the citrate adlayers deposited on the Au (111), Au(100) and Au(110) electrodes when a potential is applied were estimated at pHs 1 and 3. From these results, FTIR spectra and DFT calculations, it is concluded that solvated citrate can become simultaneously adsorbed through three dehydrogenated carboxylic groups in bidentate configuration on Au(111), but only through two on Au(100) and Au(110). As a result of this behavior, citrate can become more strongly adsorbed on Au(111) than on the other two basal planes of gold under the synthesis conditions, which would explain why tetrahedral and octahedral colloidal gold NPs are preferentially shaped when citric acid is used as the capping agent in water. This conclusion coincides with the previously one obtained on platinum, suggesting that the mechanism here described would operate also on other metals having fcc structure.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Surface charge and interfacial acid-base properties: pKa,2 of carbon dioxide at Pt(110)/perchloric acid solution interfaces

  • Martínez-Hincapié, Ricardo
  • Rodes, Antonio
  • Climent, Victor
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
  • Rodes, Antonio|||/items/0498f81b-f1a5-4f48-bee3-357d1a2c65e6
In this work, we investigate the in-situ spectro-electrochemical behavior of Pt(110) electrodes in contact with acid solutions saturated with CO2. Similar to previous observations reported for Pt(111) electrodes, potential-dependent signals associated to adsorbed bicarbonate and carbonate anions are observed in the FT-IRRA spectra collected for Pt(110), even when the concentration of these anions are near to zero in the bulk solution. The relative intensities of the infrared bands at different pH and applied potential values can be used to determine the interfacial pKa,2 of CO2. The surface pKa,2 value found for Pt(110) electrodes is lower than that for Pt(111) electrodes. This result can be interpreted by assuming that the more open (110) surface leads to a more alkaline interphase than the close packed (111), in the sense that it reacts with acids in a higher extent. We attribute this difference to the lower potential of zero free charge and work function values for Pt(110) electrodes compared to Pt(111) electrodes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Determination of the potential of zero charge of Pt/CO electrodes using an impinging jet system

  • Boronat-González, Ana
  • Herrero, Enrique
  • Feliu, Juan M.
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
In this manuscript, the potential of zero charge (pzc) of platinum single-crystal electrodes has been determined using the impinging jet system and recording the transient associated with the interphase formation. Initially, the Pt(111), Pt(110), and Pt(100) electrodes covered with CO were used. To demonstrate the validity of the procedure, the values obtained for the pzc of these electrodes were compared with those previously reported in the literature and also with those expected from work function changes. An excellent agreement has been found. After that, the values for the pzc of the stepped surfaces having (111) terraces and (110) steps were determined. For these surfaces, the pzc initially diminishes as the step density increases, in accordance with the expected diminution of the work function due to the Smoluchowski effect on the step site. However, for the shorter terraces, the pzc value increases with the step density, probably because of step dipole-dipole coupling due to the presence of a CO layer on the electrode.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Investigation of reactivity of Pt basal planes towards glucose electro-oxidation in neutral solution (pH 7): structure-sensitivity dependence and mechanistic study

  • Mello, Gisele A.B.
  • Cheuquepán, William
  • Feliu, Juan M.
Glucose electro-oxidation is a topic of great relevance in electrochemistry, especially due to the possibility of using this carbohydrate as a fuel in implantable DGFC cells (Direct Glucose Fuel Cell). In spite of it has already been reported in the 1990s that this reaction is sensitive to the symmetry of surface surfaces, the understanding of the structure-reactivity relationship is not completely elucidated, especially in a neutral medium, in which the particularities at well defined surface of this sensitivity is not reported yet. In this context, this work studies the electro-oxidation of glucose in phosphate buffer solution (pH 7 ~ physiological) on low-index Pt single crystal surfaces, using cyclic voltammetry and in situ FTIR techniques at room temperature, with the aim to investigate the reactivity of surface catalysts in neutral medium, and thus, understand and establish the relation between the reaction reactivity and the surface structure (structure-sensitivity). Under these conditions it is observed that glucose electro-oxidation is strongly dependent of the electrode structure in terms of catalytic activity and reaction mechanism. Pt(110) is the less active surface, due to the highest formation of COL, which is strongly adsorbed on (110) sites, poisoning them. Pt(100) is the most active surface and the reaction proceeds through a more complex mechanism. Although the highest formation of CO2 has been observed on this surface, the major activity of Pt(100) is mainly associated to the production of cyclic carbonate on (100) sites. Among Pt low-index planes, Pt(111) is the less poisoned surface, and this is because on this surface carbonate ring is absent and COL generated during the oxidative process is completely stripped out from the surface during the potential scan.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Structure effects on electrocatalysts. Oxygen reduction on Te-modified Pt(111) surfaces: Site-blocking vs electronic effects

  • Gómez Marín, Ana María
  • Briega-Martos, Valentín
  • Feliu, Juan M.
In this work, the oxygen reduction reaction (ORR) on tellurium-modified Pt(111) surfaces has been studied. Adsorption of Te adatoms on Pt(111) progressively shifts toward less positive values of both the ORR reaction onset and the half-wave potential in 0.1M HClO4 for 0 < θTe < 0.25. However, at θTe > 0.25, the ORR activity increases relative to the one at θTe < 0.25, but remains lower than that on clean Pt(111). Results were analyzed in light of simulations of kinetic currents as a function of θTe, calculated by employing a simple mean field model including both site blocking and electronic effects. Inside this framework, experimental data are best explained by considering that oxygenated Te species inhibit the ORR by either negatively modifying adsorption energies of reaction intermediates or combined site-blocking and electronic effects. A redox ORR catalysis due to redox properties of Te adatoms is discarded. Contrarily, in 0.05M H2SO4, a positive catalytic effect has been found, interpreted in terms of a competitive adsorption–desorption mechanism involving the replacement of adsorbed sulfate by Te adatoms. On the other hand, despite the strong site-blocking effect on Hads and OHads adsorption by Te adatoms, it appears that the reduced Te–Pt(111) adlayer does not inhibit the reaction, suggesting different active sites for Hads and OHads adsorption and for the rate-determining step of the ORR mechanism.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Activation Energy of Hydrogen Adsorption on Pt(111) in Alkaline Media: An Impedance Spectroscopy Study at Variable Temperatures

  • Botello, Luis
  • Feliu, Juan M.
  • Climent, Victor
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
The hydrogen evolution reaction is one of the most studied processes in electrochemistry, and platinum is by far the best catalyst for this reaction. Despite the importance of this reaction on platinum, detailed and accurate kinetic measurements of the steps that lead to the main reaction are still lacking, particularly because of the fast rate of the reaction. Hydrogen adsorption on Pt(111) has been taken as a benchmark system in a large number of computational studies, but reliable experimental data to compare with the computational studies is very scarce. To gain further knowledge on this matter, a temperature study of the hydrogen adsorption reaction has been carried out to obtain kinetic information for this process on Pt(111) in alkaline solution. This was achieved by measuring electrochemical impedance spectra and cyclic voltammograms in the range of 278 ≤ T ≤ 318 (K) to obtain the corresponding surface coverage by adsorbed species and the faradaic charge transfer resistance. From this data, the standard rate constant has been extracted with a kinetic model assuming a Frumkin-type isotherm, resulting in values of 2.60 × 10–7 ≤ k0 ≤ 1.68 × 10–6 (s–1). The Arrehnius plot gives an activation energy of 32 kJ mol–1. Comparisons are made with values calculated by computational methods and reported values for the overall HER, giving a reference frame to support future studies on hydrogen catalysis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

State of the art in the electrochemical characterization of the surface structure of shape-controlled Pt, Au, and Pd nanoparticles

  • Solla-Gullón, José
  • Feliu, Juan M.
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The application of shape-controlled metal nanoparticles in electrocatalysis has improved significantly the activity, selectivity, and even the stability of many relevant electrocatalytic reactions. It is well accepted that, by controlling the shape of the nanoparticles, it is possible to provide nanoparticles with a preferential surface structure. However, to fully understand the capabilities of these nanomaterials, it is extremely relevant to correlate shape, surface structure, and electrocatalytic reactivity. Particularly, establishing the correlations between surface structure and reactivity is the key point to be studied and understood. Consequently, having tools to characterize the surface structure of these nanoparticles is of critical importance. In this short review, we discuss about the progress in the in situ characterization of the surface structure of shaped Pt, Au, and Pd nanoparticles by electrochemical probes. The results here included clearly demonstrate the potentialities of the electrochemical tools to gain detailed information of the surface structure of these shaped nanomaterials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

The role of formic acid/formate equilibria in the oxidation of formic acid on Pt (111)

  • Busó-Rogero, Carlos
  • Ferre-Vilaplana, Adolfo
  • Herrero, Enrique
  • Feliu, Juan M.
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
The formic acid oxidation reaction has been studied in concentrated perchloric acid solutions (up to 9.14 M (60%)) on the Pt (111) surface to explore the relationships between interfacial properties and kinetics. It is found that, as the concentration of perchloric acid in the supporting electrolyte increases, the current markedly decreases, making it possible to detect adsorbed formate on the surface by voltammetric methods. With the aid of DFT calculations, it is shown that the diminution in current is the result of two opposing factors: the reduction in the concentration of free formate in solution and electrode charge effects which encourage the adsorption of formate in a particular configuration. Additionally, the electrochemical behavior under highly acidic conditions suggests the formation of clathrate structures and emphasizes the relevance of the water structure effect in electrode adsorption processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Formic acid oxidation on platinum electrodes: a detailed mechanism supported by experiments and calculations on well-defined surfaces

  • Ferre-Vilaplana, Adolfo
  • Perales-Rondón, Juan V.
  • Busó-Rogero, Carlos
  • Feliu, Juan M.
  • Herrero, Enrique
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
In spite of the fact that the formic acid oxidation reaction on electrode surfaces has been extensively investigated, a detailed mechanism explaining all the available experimental evidence on platinum has not been yet described. Herein, using a combined experimental and computational approach, the key elements in the mechanism of the formic acid oxidation reaction on platinum have been completely elucidated, not only for the direct path, through an active intermediate, but also for the CO formation route. The experimental results suggest that the direct oxidation path on platinum takes place in the presence of bidentate adsorbed formate. However, the results reported here provide evidence that this species is not the active intermediate. Monodentate adsorbed formate, whose evolution to the much more favorable bidentate form would be hindered by the presence of neighboring adsorbates, has been found to be the true active intermediate. Moreover, it is found that adsorbed formic acid would have a higher acid constant than in solution, which suggests that adsorbed formate can be originated not only from solution formate but also from formic acid. The CO formation path on platinum can proceed, also from monodentate adsorbed formate, through a dehydrogenation process toward the surface, during which the adsorbate transitions from a Pt–O adsorption mode to a Pt–C one, to form carboxylate. From this last configuration, the C–OH bond is cleaved, on the surface, yielding adsorbed CO and OH. The results and mechanisms reported here provide the best explanation for the whole of the experimental evidence available to date about this reaction, including pH, surface structure and electrode potential effects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Electrocatalytic Oxidation of Glycerol on Platinum Single Crystals in Alkaline Media

  • Sandrini, Regiani M.L.M.
  • Sempionatto, Juliane Renata
  • Tremiliosi-Filho, Germano
  • Herrero, Enrique
  • Feliu, Juan M.
  • Souza-Garcia, Janaina
  • Angelucci, Camilo Andrea
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
Glycerol adsorption and oxidation reactivity at platinum single crystal electrodes in alkaline media using electrochemical and Fourier transform infrared (FTIR) techniques are reported. The behavior of Pt(100) and Pt(110) for the glycerol electrooxidation reaction (GEOR) were compared and analyzed altogether with those previously reported for Pt(111) ( R. M. L. M. Sandrini, J. R. Sempionatto, E. Herrero, J. M. Feliu, J. Souza‐Garcia, C. A. Angelucci, Electrochem. commun. 2018, 86, 149–152). The voltammetric profiles confirm the structure sensitivity of GEOR as well as the role of the surface atoms orientation on the electrocatalytic activity. The Pt(100) surface has shown to be less prone to poisoning during multiple potential cycles in contrast to Pt(110), which suffers an accentuate deactivation at the first positive‐going scan. Spectroscopic results show that the GEOR on all three surfaces is characterized by the presence of two broad bands, centered at circa 1400 cm−1 and 1600 cm−1. This provides evidence that the GEOR mechanism undergoes glycerol dehydrogenation to alkoxydes followed by the formation of aldehyde intermediates adsorbed as η1(O)‐aldehyde and η1(C)‐acyl geometry, respectively. The surface atomic arrangement induces different selectivity in the oxidation process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Direct In Situ Raman Spectroscopic Evidence of Oxygen Reduction Reaction Intermediates at High-Index Pt(hkl) Surfaces

  • Dong, Jin-Chao
  • Su, Min
  • Briega-Martos, Valentín
  • Li, Lang
  • Le, Jia-Bo
  • Radjenovic, Petar
  • Zhou, Xiao-Shun
  • Feliu, Juan M.
  • Tian, Zhong-Qun
  • Li, Jian-Feng
The study of the oxygen reduction reaction (ORR) at high-index Pt(hkl) single crystal surfaces has received considerable interest due to their well-ordered, typical atomic structures and superior catalytic activities. However, it is difficult to obtain direct spectral evidence of ORR intermediates during reaction processes, especially at high-index Pt(hkl) surfaces. Herein, in situ Raman spectroscopy has been employed to investigate ORR processes at high-index Pt(hkl) surfaces containing the [011̅] crystal zone—i.e., Pt(211) and Pt(311). Through control and isotope substitution experiments, in situ spectroscopic evidence of OH and OOH intermediates at Pt(211) and Pt(311) surfaces was successfully obtained. After detailed analysis based on the Raman spectra and theoretical simulation, it was deduced that the difference in adsorption of OOH at high-index surfaces has a significant effect on the ORR activity. This research illuminates and deepens the understanding of the ORR mechanism on high-index Pt(hkl) surfaces and provides theoretical guidance for the rational design of high activity ORR catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Loading effect of carbon-supported platinum nanocubes on oxygen electroreduction

  • Jukk, Kristel
  • Kongi, Nadezda
  • Tammeveski, Kaido
  • Arán-Ais, Rosa M.
  • Solla-Gullón, José
  • Feliu, Juan M.
  • Arán-Ais, Rosa M.|||/items/9120125e-5943-4754-ba84-7200ee3b8c85
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
In this work, Vulcan carbon-supported cube-shape Pt nanoparticles with various metal loadings were synthesised in the presence of oleylamine and oleic acid. Surface morphology of different Pt/C samples was examined by transmission electron microscopy (TEM) and their metal loading verified by thermogravimetric analysis (TGA). TEM micrographs showed Pt nanoparticles with a preferential cubic-shape and increased agglomeration of the particles with increasing Pt loading. Electrochemical characterisation of the Pt/C catalysts indicated that the resulting Pt nanoparticles present a preferential (100) surface structure. The electrocatalytic properties of the Pt/C catalysts of different metal loading were evaluated towards the oxygen reduction reaction (ORR) both in acidic and alkaline media employing the rotating disk electrode (RDE) configuration. Interestingly, similar specific and mass activities were found in both solutions revealing that the ORR activities were independent of the Pt loading and suggesting that all the Pt nanocubes contributed as isolated particles.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Site-specific catalytic activity of model platinum surfaces in different electrolytic environments as monitored by the CO oxidation reaction

  • Farias, Manuel J.S.
  • Mello, Gisele A.B.
  • Tanaka, Auro A.
  • Feliu, Juan M.
Stepped Pt surfaces having different width (1 1 1) terraces interrupted by (1 1 0) or (1 0 0) monoatomic steps were employed to evaluate the catalytic activity toward CO oxidation at Pt specific sites in HClO4, H2SO4, and H3PO4 solutions, as well as in phosphate buffer and alkaline solution. The catalytic activity at the (1 1 1) terraces was sensitive to the nature of the anions derived from the electrolyte dissociation, while no effect on activity was detected at the monoatomic steps. A change in solution pH, passing from acid to alkaline solutions, had contrasting effects on catalytic activity at the (1 1 1) terraces and the step sites, with the catalytic activity of the (1 1 1) terraces improving, while activity at the step sites deteriorated. During the CO adlayer oxidation, the release of surface sites occurred preferentially from the (1 1 1) terraces of the Pt(s) − [(n − 1)(1 1 1) × (1 1 0)] surfaces, while from Pt(s) − [(n)(1 1 1) × (1 0 0)] surfaces, (1 1 1) terrace and (1 0 0) step sites were released simultaneously.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Identity of the Most and Least Active Sites for Activation of the Pathways for CO2 Formation from the Electro-oxidation of Methanol and Ethanol on Platinum

  • Farias, Manuel J.S.
  • Cheuquepán, William
  • Tanaka, Auro A.
  • Feliu, Juan M.
In the field of catalysis on solid surfaces, discrimination of the site-specific chemistry taking place on surfaces consisting of multiple types of sites is challenging, especially at electrified solid/liquid interfaces. In this study, site-specific chemical labeling on Pt stepped surfaces was achieved by attaching the 13CO species exclusively on the top side of the (110) steps, while making all of the (111) sites available. The catalysts were then employed in a spectro-electrochemical study of the electro-oxidation of methanol and ethanol. The onset potentials for the formation of 13CO2 and 12CO2 revealed the existence of two channels of carbon dioxide formation, separated by about 0.22 V, on the same Pt surface. The active sites with lower overpotential requirement (or lower energy input) for activation of the reaction pathway of CO2 formation resided on the (111) terraces. On the other hand, the active sites with higher overpotential requirement (or higher energy input) for activation of the reaction pathway for electro-oxidation of 13COads species to 13CO2 were at the top of the (110) steps. The findings revealed the identities of the most active sites and least active sites involved in the formation of CO2 during the electro-oxidation of alcohols. On Pt surfaces, the complex interplay involving the steps on the surface favors activation of the pathways for COads oxidation on the (111) terraces, rather than promoting reaction steps directly on the steps themselves.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Why Citrate Shapes Tetrahedral and Octahedral Colloidal Platinum Nanoparticles in Water

  • Gisbert-González, José M.
  • Feliu, Juan M.
  • Ferre-Vilaplana, Adolfo
  • Herrero, Enrique
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
The performance of many advanced catalytic systems depends not only on the size and composition but also on the specific shape of the metal nanoparticles (NPs) from which they are assembled. In turn, the shape of colloidal NPs depends on the specific capping agent involved in their synthesis, though the mechanism is still poorly understood. Here, supported by electrochemical experiments, Fourier transform infrared spectra, and density functional theory calculations, on well-defined surfaces, we show how a specific capping agent determines the shape of colloidal NPs. Solvated citrate can become simultaneously adsorbed on the Pt(111) surface through three dehydrogenated carboxylic groups, with each one of them in bidentate configuration. On the other two basal planes, citrate can be adsorbed through only two of them. For this reason, under the synthesis conditions, citrate is more favorably adsorbed on the Pt(111) than on the other two basal planes of platinum. This adsorption behavior explains why colloidal platinum NPs of tetrahedral and octahedral shape are produced when citrate is used as the capping agent in water. The mechanism for citrate would also determine the shape of other pure face-centered cubic metals and can inspire the engineering of future capping agents.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Why nitrogen favors oxygen reduction on graphitic materials

  • Ferre-Vilaplana, Adolfo
  • Herrero, Enrique
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
Nitrogen-doped graphitic materials as promising catalysts for the oxygen reduction reaction in fuel-cells have been mainly investigated under the graphitic versus pyridinic nitrogen-dopant dichotomy approach. However, we show here that the active sites, reaction mechanism, selectivity and even the origin of each behavior can be better understood when the stability of the possible active site and the eventual contribution of charge from the surface are considered separately. The roles in the reaction played by specific nitrogen-dopants, the hydrogenation of pyridinic nitrogen-dopants and the solvation effect are all clarified. The investigated activity is much more closely linked to the edges, where certain carbon atoms are sufficiently unstable or can be destabilized by means of adjacent nitrogen-dopants, and where reaction intermediates can be better relaxed, than to the presence of specific nitrogen-dopants. Unfortunately, high overpotentials and the undesired production of hydrogen peroxide appear to be unavoidable in the oxygen reduction to water on these materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Heterogeneous electrocatalysis of formic acid oxidation on platinum single crystal electrodes

  • Boronat-González, Ana
  • Herrero, Enrique
  • Feliu, Juan M.
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
The oxidation of formic acid on single crystal platinum electrodes modified by a constant coverage of irreversibly adsorbed adatoms is described in this review. This subject has been studied for a wide period and the available information is huge. In consequence, we have selected the self-consistent set of results, which try to explain the nature of the electrocatalytic behavior of the adatoms and to point out the research details that should be addressed in the future. All the results have been linked to the increasing understanding of formic acid oxidation on single crystal platinum electrodes in the absence of foreign adatoms.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Peroxodisulfate reduction as a probe to interfacial charge

  • Martínez-Hincapié, Ricardo
  • Climent, Victor
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
Peroxodisulfate reduction has been investigated on Pt(111) on a broad range of pH values as a way to test interfacial charge. The reaction always proceeds in a potential window that is almost pH independent, regardless of changes in the presence of adsorbed species. Comparison with other available information for these interphases allows to conclude that this reaction is very sensitive to the free charge on the metal, being inhibited when the latter is negative. This explains the complete current inhibition when the potential is lower than the potential of zero free charge. Most remarkably, the inhibition at high potentials can be related to the existence of a second potential of zero charge, above which the surface becomes again negatively charged. This conclusion agrees with classical results for polycrystalline platinum (which has been reexamined), results from laser induced T-jump experiments and recent theoretical models of the interphase. In this way, this reaction is postulated as a new probe to locate the values of the potential of zero free charge.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

The influence of stepped Pt[n(111)×(110)] electrodes towards glycerol electrooxidation: Electrochemical and FTIR studies

  • Del Colle, Vinicius
  • Nunes, Luiza Maria da Silva
  • Angelucci, Camilo Andrea
  • Feliu, Juan M.
  • Tremiliosi-Filho, Germano
In situ Fourier Transform Infrared (FTIR) spectroscopy and cyclic voltammetry were combined for the first time to study the influence of Pt steps sites, belonging to the series of Pt(S)[n(111)x(111)], over the glycerol electrooxidation reaction (GEOR) in acid media. The spectroelectrochemical studies exhibited that the adsorption and electrooxidation process of glycerol at Pt surfaces are quite sensitive to the monoatomic ‘defect’ added on the well-ordered surface. The presence of (110) steps on the (111) terraces plays a significant role in the CV profiles with the presence of two peaks well-defined on the positive-going scan at 0.57 and 0.70 V, which the first one can be related to the (111) oriented terraces, and the second one to the (110) oriented ‘defects’. The in situ FTIR detached the presence of three well-discernible bands (ν(CO), ν(COL) and ν(CO2)) which give us new insights about glycerol electrooxidation mechanism and its dependence with the surface structure. The Pt(111) has shown the higher electroactivity towards GEOR, while Pt(110) has demonstrated greater ability in breaking C–C bond to convert into CO2. Moreover, for the Pt(111) and Pt(554) electrodes, the C–C seems to break only during the positive scan. On the other hand, at the beginning of the reverse scan, the incomplete oxidation prevails for Pt(111) and Pt(554) and, thus, being more selective to form only C3 products as dihydroxyacetone, glycolic acid and glyceric acid.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Understanding formic acid oxidation mechanism on platinum single crystal electrodes

  • Herrero, Enrique
  • Feliu, Juan M.
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
Recent results on the formic acid oxidation reaction on platinum electrodes, especially those obtained for platinum single crystal electrodes are reviewed. With all the available data, a detailed mechanism for both reaction paths of the mechanism is proposed. For the CO formation path, oxidation and reduction steps are involved sequentially. On the other hand, the active species is a monodentate adsorbed formate. This adsorption mode is favored in the presence of additional adsorbed species in the neighborhood. The proposed mechanism agrees with all the experimental results obtained for the reaction.