Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An in situ XAS study of the activation of precursor-dependent Pd nanoparticles

  • Wittee Lopes, Christian
  • Cerrillo, José Luis
  • Agostini, G.
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The activation of precursor-dependent Pd nanoparticles was comprehensively followed by in situ X-ray absorption spectroscopy on two inorganic supports for rationalizing the final catalytic activity. Two series of Pd-based catalysts (7 wt% Pd) were prepared by impregnation of gamma-Al2O3 and activated carbon supports varying the metal precursor (Pd(NO3)(2), PdCl2 and Pd(OAc)(2)). The most relevant physicochemical properties of the studied catalysts were determined by several techniques including ICP-OES, XRD, N-2 adsorption and XAS. The results indicate that the thermal stability of the metal precursor plays an important role in the size and speciation of the formed Pd nanoparticles after the activation process. The Cl-based precursor, which presents high thermal stability, passes through a PdOxCly mixed phase when submitted to calcination on Pd/Al2O3 and leaves Cl-species after metal reduction on Pd/C (which can be detrimental to catalytic reactions). Differently, Pd(OAc)(2) and Pd(NO3)(2) promote the formation of larger species due to different precursor decomposition pathways. Ordered PdO is observed even before calcination when Pd(NO3)(2) was used as a metallic source, which translates into large nanoparticles after reduction in H-2. By using the average coordination numbers of Pd species obtained from EXAFS data of the as-reduced catalysts, a correlation was observed comparing the three precursors: PdCl2 generates smaller nanoparticles than Pd(OAc)(2), which in turn generates smaller nanoparticles than Pd(NO3)(2), regardless of the support used for catalyst preparation., The authors thank the Spanish Ministry of Economy and Competitiveness through MAT2015-71842-P (MINECO/FEDER) and SEV-2016-0683 projects for the financial support. We gratefully acknowledge ALBA synchrotron for allocating beamtime (proposal 2015091414), Carlo Marini and CLAESS beamline staff for their help and technical support during our experiment. C. W. Lopes (Science without Frontiers - Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship. J.L. Cerrillo wishes to thank MINECO for the Severo Ochoa contract for PhD formation (SVP-2014-068600).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Nature and evolution of Pd catalysts supported on activated carbon fibers during the catalytic reduction of bromate in water

  • Cerrillo, Jose L.
  • Lopes, Christian W.
  • Agostini, Giovanni
  • Kiwi-Minsker, Lioubov
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Catalytic hydrogenation of bromate using Pd catalysts supported on activated carbon fibers is a smart solution to treat bromate polluted water. These catalysts have been analyzed by different techniques for an in-deep characterization of the active sites. The in situ X-ray absorption spectroscopy and the CO chemisorption studies showed that Pd-0 nanoparticles with different crystal sizes were generated on the support during hydrogen activation at 200 degrees C and that the PdHx-phase was formed during the cooling to room temperature. As PdHx species formed on Pd-0 nanoparticles are responsible for bromate reduction, the most active catalysts are those having Pd-0 nanoparticles with large crystal sizes, where PdHx species are easily formed. The catalysts are fully stable in succesive reaction runs. It has been also shown that bromate reduction rate depends on the bromate concentration and on the hydrogen partial pressure, with a pseudo-first reaction order towards both reactants., Authors thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 (MINECO/FEDER) and SEV-2016-0683 projects for the financial support. We gratefully acknowledge ALBA synchrotron for allocating beamtime (proposal 2015091414) and CLAESS beamline staff for their technical support during our experiment. C. W. Lopes (Science without Frontiers -Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship. J. L. Cerrillo is grateful to MINECO for the Severo Ochoa contract for PhD formation (SVP-2014-068600). L. Kiwi-Minsker acknowledges financial support provided by Russian Science Foundation (project 15-19-20023). Authors also thank Kynol Europa GmbH for the supply of the activated carbon fibers.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Curative activity against citrus postharvest green mold of composite hydroxypropyl methylcellulose-beeswax edible coatings with zeolites containing Ag-nanoparticles

  • Palou, L.
  • Cerrillo, J. L.
  • Klangmuang, P.
  • Perez-Gago, M.B.
  • Taberner, V.
  • de la Fuente, B.
  • Sothornvit, R.
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Two types of commercial Na-zeolites, linde type A (LTA) and faujasite (FAU) were prepared with different percentage of silver that was incorporated by ion exchange using solutions of AgNO3. The physico-chemical properties of the samples were established using different techniques such as atomic emission spectroscopy with inductively coupled plasma (ICP-OES), X-ray diffraction (XRD), electronic microscopy (SEM and EDX), and temperature-programmed reduction (TPR). The curative activity of these materials was first evaluated as water dispersions in in vivo primary screenings by placing a drop (30 µL) in a rind wound of `Valencia¿ oranges that had been inoculated 24 h before with a conidial suspension of Penicillium digitatum. Selected Agzeolites were incorporated as antifungal ingredients at different concentrations into composite hydroxypropyl methylcellulose (HPMC)-beeswax (BW) edible emulsions prepared with 8% total solid content with stearic acid as emulsifier and glycerol as plasticizer. Depending on the experiment, these coatings were applied 24 h after fungal inoculation to `Valencia¿ oranges as drops in rind wounds or covering the entire fruit. Controls included inoculated but untreated fruit and inoculated fruit treated with HPMC-BW without Ag-zeolites. After incubation of treated fruit at 20°C for 7 days, coatings amended with Ag-zeolites reduced the incidence and severity of green mold by more than 80%, showing high potential for effective disease control. Curative activity depended on Ag concentration and FAU zeolites were more effective than LTA zeolites, probably because of their larger pore apertures and higher Si/Al ratio that favored silver diffusion. However, coatings with the highest silver content were phytotoxic causing dark blemishes on the fruit rind. Further work is needed to optimize non-phytotoxic coatings with the highest curative activity., Spanish MINECO and European FEDER programme are acknowledged for financial support (project MAT2015-71842-P). Severo Ochoa programme of MINECO is also acknowledged for the Ph.D. formation contract of J.L. Cerrillo (SVP-2014-068600). Fontestad S.A. (Montcada, Vale¿ncia) is acknowledged for providing fruit.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Functional Ag-Exchanged Zeolites as Biocide Agents

  • Cerrillo, José Luis
  • Pérez-Gago, María B.
  • Villamón-Pérez, Diana
  • Palou-Valls, Lluis
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Valencia Valencia, Susana|||0000-0001-7160-2795
[EN] Materials based on silver are used for controlling different pathogenic microorganisms. However, the influence of the silver carrier in the biocidal activity of the material has been scarcely reported. The present research is focused on studying the influence of zeolite properties on the biocidal activity of silver-exchanged zeolites, acting as reservoirs of silver species. The biocidal action of Ag-Faujasite (Ag-FAU) and Ag-Linde Type A (Ag-LTA) zeolites, containing different silver contents, is studied against different types of bacteria and fungi. Importantly, zeolite structure is found to be a significant parameter for controlling the antibacterial activity of Ag-exchanged zeolites. The results show that Ag-FAU presents a higher activity than Ag-LTA, because the topology of FAU combined with its highest Si/Al ratio favors the formation and release of silver species with important biocidal activity. Some insights on the bactericidal mechanism of Ag-zeolites are envisaged by means of high resolution transmission electron microscopy, showing the multi-targeted biocidal action of Ag species released from zeolites. Besides, it is shown that Ag-zeolites are more active against bacteria than fungi. Antifungal activity is highly dependent on the fungi species and the structure of the zeolite is not as determinant as it is for the antibacterial activity., The authors thank the Spanish Ministry of Economy and Competitiveness through MAT-2015-71842-P and SEV-2016-0683 for the financial support and J.L. Cerrillo wish to thank Spanish Ministry of Economy and Competitiveness for the Severo Ochoa PhD fellowship (SVP-2014-068600).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Silver exchanged zeolites as bactericidal additives in polymeric materials

  • Cerrillo, J. L.
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] In this work, different Ag-zeolites have been evaluated as biocide materials against two common bacteria, displaying an excellent bactericidal activity in different media. The results demonstrate that the amount of silver, the type of zeolitic structure and the zeolite Si/Al ratio strongly influence on their bactericidal activity. The higher Ag amount, the better antimicrobial activity. Also, zeolites having large pore openings and Si/Al ratio close to 2 have shown the highest biocidal activity. The characterization of Ag-zeolites by different techniques shows that the incorporation of Ag at the zeolites does not alter the zeolite structure and that Ag is incorporated as Ag+ cations. The most promising Ag-zeolites with a Si/Al ratio of 2 were introduced in a polymer matrix of polypropylene, showing very high biocide activity against S.aureus. The applicability of the resulting Ag-zeolite-polymer material is limited because its darkening due to the presence of reduced silver species. The incorporation of a photo-stabilizer does not decrease the biocide activity, while maintains the original color of the polypropylene polymer. It has been shown that lixiviated Ag+ cations are the biocide active species. These Ag-species are released even when the Ag-zeolite is incorporated into the polymer, providing bactericide effects to the final Ag-zeolite-polymer composite., The authors thank the Ministerio de Ciencia, Innovaci.on y Universidades, Agencia Estatal de Investigaci.on and Fondo Europeo de Desarrollo Regional through RTI2018-101784-B-I00 (MCIU/AEI/FEDER, UE) and SEV-2016-0683 for the financial support. J.L. Cerrillo wishes to thank MINECO for the Severo Ochoa PhD fellowship (SVP2014-068600).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Influence of the Support Nature and the Metal Precursor in the Activity of Pd-based Catalysts for the Bromate Reduction Reaction

  • Cerrillo, José L.
  • Lopes, Christian W.
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Palladium catalysts supported on different materials (alumina, activated carbon and mixed oxide derived from hydrotalcite) and prepared with different metal precursors (nitrate, chloride and acetate) have been characterized and tested for the bromate reduction reaction. The catalytic behavior depends on the support nature and on the metallic precursor used for the catalyst preparation. Pd catalyst supported on a mixed oxide has a low activity due to the high affinity of the reconstructed support for the Br- formed, preventing the reactants to approximate the active Pd sites. Pd catalyst supported on activated carbon has a surface negative charge and a microporous structure, making difficult the interaction of the active sites with the reactants. The best results are obtained with the catalyst supported on alumina due to its physical-chemical properties, i. e. mesoporosity, positive surface charge and reversible adsorption of reactants and products. These characteristics make easy bromate and H-2 adsorption on the active sites and subsequent reaction, thus resulting in a better activity. The Pd precursor salt also influences the catalytic activity as it has an effect on the Pd nanocrystal size. The best results are obtained with the metal precursor that produces homogeneous and large Pd metallic crystallites., Authors thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 (MINECO/FEDER) and SEV2016-0683 projects for the financial support. We gratefully acknowledge ALBA synchrotron for allocating beamtime and CLAESS beamline staff for their technical support during our experiment. C.W. Lopes (Science without Frontiers -Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship. J.L. Cerrillo is grateful to MINECO for the Severo Ochoa contract for PhD formation (SVP-2014-068600).The authors also wish to thank Elena Crespo and Adrian Pla for their collaboration in the experimental part of the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Oxidative Degradation of Trichloroethylene over Fe2O3-doped Mayenite: Chlorine Poisoning Mitigation and Improved Catalytic Performance

  • Cucciniello, Raffaele
  • Intiso, Adriano
  • Siciliano, Tiziana
  • Cerrillo, José Luis
  • Proto, Antonio
  • Rossi, Federico
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
[EN] Mayenite was recently successfully employed as an active catalyst for trichloroethylene (TCE) oxidation. It was effective in promoting the conversion of TCE in less harmful products (CO2 and HCl) with high activity and selectivity. However, there is a potential limitation to the use of mayenite in the industrial degradation of chlorinated compounds-its limited operating lifespan owing to chlorine poisoning of the catalyst. To overcome this problem, in this work, mayenite-based catalysts loaded with iron (Fe/mayenite) were prepared and tested for TCE oxidation in a gaseous phase. The catalysts were characterized using different physico-chemical techniques, including XRD, ICP, N-2-sorption (BET), H-2-TPR analysis, SEM-EDX, XPS FESEM-EDS, and Raman. Fe/mayenite was found to be more active and stable than the pure material for TCE oxidation, maintaining the same selectivity. This result was interpreted as the synergistic effect of the metal and the oxo-anionic species present in the mayenite framework, thus promoting TCE oxidation, while avoiding catalyst deactivation., This work was supported by the grants ORSA167988 and ORSA174250 funded by the University of Salerno. AEP and JLC thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 and SEV-2016-0683 for the financial support. J.L. Cerrillo wishes to thank the Spanish Ministry of Economy and Competitiveness for the Severo Ochoa PhD fellowship (SVP-2014-068600).