Skip to main content

MEJORA DEL CONCEPTO DE BIORREFINERIA MEDIANTE IMPLEMENTACION DE NUEVOS PROCESOS CATALITICOS CON CATALIZADORES SOLIDOS DE METALES NO NOBLES PARA LA PRODUCCION DE BIOCOMPUESTOS

PGC2018-097277-B-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 43
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Catalytic Processes for Biomass-Derived Platform Molecules Valorisation

  • Ventura, Maria
  • Marinas, Alberto
  • Domine, Marcelo Eduardo
[EN] Nowadays, biomass is an interesting raw material for chemical industry, and the valorisation of its derivatives becomes in a sustainable alternative against to the depletion of fossil sources necessary for the production of energy, fuels and chemicals. Different organic compounds, such as sugars, polyols, furanics, as well as several acids (i.e. levulinic acid, succinic acid, itaconic acid, 3-hydroxy-propionic acid, among others) can be obtained after a primary treatment of the lignocellulosic-type biomass. These bio-derived molecules can be used as "platform chemicals" for the synthesis of numerous chemical products (i.e. components and additives for fuels, solvents and paintings, new monomers for polymer industry, etc.). In this review, the possibilities of valorisation via novel catalytic processes of some of the most promising biomass(cellulose/hemicellulose)-derived intermediates and platform chemicals for obtaining both conventional and new high added-value chemicals for industry will be assessed, also including cascade-type (or "one-pot") catalytic processes recently developed., MED acknowledges financial support by the Spanish Government (PGC2018-097277-B-I00 and SEV-2016-0683) and Generalitat Valenciana (GVA, PROMETEO/2018/006). AMA is thankful to MINECO financial support (ENE2016-81013-R (AEI/FEDER, UE) and Andalusian Government (UCO-FEDER Project CATOLIVAL, re. 1264113-R, 2018 call). MV thanks the EU H2020 for the Marie Skodowska-Curie (GA 754382), GOT ENERGY TALENT. The content of this article does not reflect the official opinion of the European Union. Responsibility for the information and views expressed herein lies entirely with the author(s).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of a hybrid Pd-0/Pd-carbide/carbon catalyst material with high for reactions

  • Garcia-Ortiz, Andrea
  • Cored-Bandrés, Jorge
  • Ruano-Sánchez, Daniel
  • Pérez-Dieste, Virginia
  • Vidal, Juan D|||0000-0002-6862-6443
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] We present a highly selective and active Pd carbon catalyst prepared by an easy hydrothermal synthesis method. This synthetic procedure allows the stabilization under mild conditions of interstitial carbon atoms on the surface of a Pd-0 carbon catalyst. The so formed Pd carbide phase appears on the upper surface layers of the Pd carbon catalyst, as demonstrated by X-ray photoelectron depth profile analysis using variable synchrotron X-ray energies. The presence of carbon in the palladium carbide species modifies the electronic state of surface Pd atoms, resulting in more electron positive Pd species (Pdd+). This influences the adsorption of reactants and reaction intermediates during the hydrogenation of alkynes, dienes and imines, resulting in high selectivities at practically 100% conversion. (C) 2020 Elsevier Inc. All rights reserved., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through "Severo Ochoa"Excellence Programme (SEV-2016-0683) and the PGC2018-097277-B-100 project. The authors also thank the Microscopy Service of UPV for kind help on measurements. A. Garcia-Ortiz thanks "Severo Ochoa" Programme (SEV-2016-0683) for a predoctoral fellowship. J. Cored thanks the Spanish Government (MINECO) for a "Severo Ochoa"grant (BES-2015-075748). D. R. thanks European Research Council project SYNCATMATCH (671093). The NAP-XPS experiments were performed at the NAPP branch of the CIRCE beamline at the ALBA Synchrotron with the collaboration of ALBA staff.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A tandem process for in situ H2O2 formation coupled with benzyl alcohol oxidation using Pd-Au bimetallic catalysts

  • Martínez, Jordan Santiago
  • Mazarío, Jaime
  • Galdeano-Ruano, Carmen Piedad
  • Gutiérrez-Tarriño, Silvia
  • Gaona Miguélez, José Antonio
  • Domine, Marcelo Eduardo
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Alcohol oxidation is one of the most important industrial organic reactions. Traditionally, the best-suited catalysts are Pd, Pt and Au supported nanoparticles. The research community has recently started developing strategies for synthesizing carbon-supported Pd/Au bimetallic nanoparticles (NPs), leading to higher activities and selectivities. However, the metallic active species in these catalysts are usually generated using sodium borohydride (NaBH4), which is not synthetically easy to reproduce. In fact, minor modifications in pH, concentration and/or other parameters have a prominent effect on the nature of the promoted material. In this work, a robust process involving dihydrogen flow (H2) at 200 °C as a reducing agent for synthesizing Pd/Au supported bimetallic materials was considered an alternative to the common pathway. The physicochemical properties of the materials derived from different reducing reagents and of varying composition ranges were studied using HR-TEM, XRD, CO chemisorption, and XPS. Their stability and activity were also tested for benzyl alcohol oxidation to benzaldehyde under mild reaction conditions (60 °C, water as the solvent, and PO2 = 1.5 bar). Notably, a catalyst from the hydrogen reduction process with a metal composition of 0.8%Pd¿0.2%Au/C consisting of bimetallic clusters (¿1.5 nm) proved to be the best material (C = 94%, S = 99%). Catalytic performances were strongly correlated with structural properties, such as nanoparticle size and distribution, which, in turn, were affected by the reduction step and the metal composition range. Finally, the influence of oxidants on benzyl alcohol oxidation has also been studied, along with the first approach for the tandem in situ formation of H2O2 coupled with alcohol oxidation., The authors are thankful for the financial support by the Spanish Government (RTI2018-096399-A-I00 and PGC2018-097277-B-I00 funded by MICINN/AEI/10.13039/501100011033) and Junta de Andalucia (P20 01027 and PYC 20 RE 060 UAL). The electron microscopy service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of Ti Incorporation to Bimetallic Mesoporous Carbon in the Production of 2,5-Dimethylfuran from Biomass Derivatives

  • Ledesma, Brenda C.
  • Juárez, Juliana M.
  • Beltramone, Andrea R.
  • Domine, Marcelo Eduardo
[EN] Monometallic and bimetallic supported catalysts were developed to produce 2,5-dimethylfuran (DMF) trough hydrogenolysis of 5-(hydroxymethyl)furfural (HMF). Detailed physicochemical characterization was done to understand structure-activity correlation. Through a series of experiments and comparatives tests, the synergistic effect among Pt, Ir, and Ti incorporated in the support was investigated. Results revealed that using the titanium contained ordered mesoporous carbon, synthesized by a novel technique, high selectivity to DMF was achieved. In the case of the best catalyst PtIr-TiC, the good activity and excellent selectivity to the desired product DMF (98% yield) was related to the high hydrogenating capacity of the bimetallic sites, the acid support characteristics and the high metal nanoparticles dispersion achieved on the mesoporous titanium modified carbon support., NANOTEC, CONICET, Universidad Tecnologica Nacional, Maestro Lopez y Cruz Roja Argentina. We acknowledge the financial support provided by CONICET Argentina, PIP CONICET 11220120100218CO 2020. M.E.D thanks Spanish Government financial support (CTQ2015-67592 and PGC2018-097277-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Pd supported on mixed metal oxide as an efficient catalyst for the reductive amination of bio-derived acetol to 2-methylpiperazine

  • Mazarío-Santa-Pau, Jaime
  • Raad, Zaher
  • Cerdá-Moreno, Cristina
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Domine, Marcelo Eduardo
[EN] An efficient process for synthesizing a high added-value N-heterocycle (2-methylpiperazine, 2-MP) via reductive amination of hydroxyacetone or acetol (product of the selective dehydration of glycerol) with ethylenediamine by using Pd supported catalysts under mild reaction conditions is here presented. Catalysts based on Pd nanoparticles supported on metallic oxides and mixed oxides were prepared and characterized by ICP analysis, XRD, HR-TEM, and NH3-TPD, among others. Catalytic activity comparisons of Pd-based materials (also including commercial references) were done and obtained results correlated with metal particle morphology (analyzed by CO-FTIR) and its ability to activate the C = N bond. The best results were attained with Pd/TiO2-Al2O3 and Pd/ZrO2-Al2O3, the former yielding >80% of 2-MP. The Pd/TiO2-Al2O3 catalyst successfully enables the activation of the imine group (C = N), due to a larger number of unsaturated Pd sites in its nanoparticles, while keeping a suitable acidity to effectively and selectively carry out the reductive cyclo-amination reaction even with lower catalyst loadings. This research work offers a new and sustainable catalytic route for the synthesis of organo-nitrogen compounds taking advantage of renewable raw materials (i.e. acetol) as a carbon source and using efficient Pd supported catalysts., The authors express their gratitude to the Spanish Government for the funding (MICINN: CTQ2015-67592, PGC2018-097277-B-I00 and Severo Ochoa Program: SEV-2016-0683). J. M. thanks the MICINN (CTQ2015-67592) for his PhD scholarship. Z. R. thanks the Islamic Center Association for Guidance and Higher Education for his PhD scholarship. The authors also thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support and M. Parreno-Romero for her assistance with the measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tailor-made Al-containing mesostructured catalysts for BTXs production from biomass resources

  • Ferrero, Gabriel O.
  • Elias, Veronica R.
  • Eimer, Griselda A.
  • Idriceanu, Madalina Georgiana
  • Domine, Marcelo Eduardo
[EN] Benzene, toluene, and xylene (BTXs) are the major commodity chemicals serving a wide range of industries with large global economic impact and are currently obtained exclusively from petroleum feedstock. Alternative renewable sources from biomass are raised as a solution to satisfy the pressing needs for a fully sustainable biocommodities industry. For this reason, the chemistry of materials has focused on the synthesis of catalysts that can transform biomass into renewable chemical compounds of interest. In this work, the SBA-15 material was modified with Al to incorporate a specific Br/Le acid sites ratio to make a low-cost tailor-made catalyst for the aromatization reaction of furanic dienes and dienophiles from renewable biomass sources. In order to correlate the catalytic activity of materials with their structure and nature, the solids were characterized by several techniques such as XRD, TEM, ICP, N2 physisorption and FT-IR of adsorbed pyridine. The goal of this work was to maximize the production of p-xylene (PX) by fine-tuning the Al content in SBA-15 and optimizing the reaction conditions. The presence of Lewis (Le) and Br & Oslash;nsted (Br) acid sites in Al-SBA-15 materials with different Al contents was determined and the catalysts were evaluated in the aromatic reaction of 2,5-dimethylfuran with ethylene. The optimal combination of Le sites, to produce the first cycloaddition, and Br sites, for subsequent dehydration, was achieved with the Al(1.28)SBA-15 catalyst. After optimization of main reaction parameters (i. e., pressure, temperature and reagents and catalyst concentrations), a 42 % yield of p-xylene was achieved and maintained even after three consecutive re-cycles of solid catalyst. Finally, the possible extended scope of this catalytic system for producing toluene and trimethylbenzene from the corresponding starting reactants was also evaluated., Financial support by CONICET and CSIC (Spain) through the project COOPB20415, and by the Spanish Government (PGC2018-097277-B-I00 and PID2021-125897OB-I00) funded by MCIN/AEI/10.13039/501100011033 and FEDER funds are gratefully acknowledged. Authors also thank Miriam Parreno-Romero and the Electron Microscopy Service of Universitat Polite`cnica de Vale`ncia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Conversion of Glycerol to Value Added Products in a Semi-Continuous Batch Reactor Using Noble Metals Supported on ZSM-11 Zeolite

  • Diguilio, Eliana
  • Renzini, María S.
  • Pierella, Liliana B.
  • Domine, Marcelo Eduardo
[EN] Au, Pt, and Pd supported on ZSM-11 microporous zeolite were investigated as catalysts for glycerol (GLY) oxidation towards higher value added products. ZSM-11 was synthesized by hydrothermal treatment. Subsequently, ion exchange with NH4Cl was performed to recover acidic sites and then, Au, Pt, and Pd were incorporated onto this material by wet impregnation procedure. After thermal treatment of desorption and calcination, the corresponding Au, Pt, and Pd-ZSM-11 catalysts were obtained. These materials were characterized by different techniques, such as XRD, ICP, TEM- XEDS, and XPS, and were evaluated in the glycerol oxidation reaction by using alkaline medium and molecular oxygen as oxidizing agent. The higher conversion of GLY (66.5 mol.%) was reached for the Pt-ZSM-11 catalyst with moderate selectivity towards lactic acid (LA), while the bimetallic Au-Pt-ZSM-11 catalyst offered high selectivity to LA at moderate GLY conversion. Optimization of the main reaction parameters (i.e., temperature, reaction time and NaOH/GLY ratio) was carried out to maximize the selectivity towards the LA desired product. Thus, LA selectivity values close to 55% at GLY conversion >65% can be reached by using Pt-ZSM-11 as a catalyst under mild reaction conditions., This research was partially funded by Universidad Tecnologica Nacional UTN [PIDUTN4796], and Consejo Nacional de Investigaciones Cientificas y Tecnicas CONICET [PIP-CONICET 112 201301 00146 CO].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reflux-synthesized bulk and diluted W-Nb-O mixed oxide bronzes for the valorization of short-chain oxygenates aqueous mixtures

  • Delgado-Muñoz, Daniel
  • La Salvia, N.
  • Fernandez-Arroyo-Naranjo, Alberto
  • Domine, Marcelo Eduardo
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] This work reports the preparation of bulk and KIT-6-diluted W-Nb-O mixed oxide bronzes by a reflux method. The influence of the incorporation of Nb and a mesoporous silica on the physicochemical features of the catalysts is studied. The addition of Nb favors the formation of single-phase oxide bronze structure, with improved Lewis acidity; while the incorporation of KIT-6 gives rise to well-dispersed mixed metal oxide particles on the diluter. These diluted W-Nb-O catalysts present enhanced surface areas and mesopore volumes. The materials have been tested in the valorization of an aqueous model mixture (acetol/propanal/ethanol/acetic acid/water weight ratio of 5/25/10/30/30), through C-C bond formation reactions. The increase in the Lewis nature of surface acid sites stands as the key point to maximize the total organic yield during the reaction (Cs-Cio products). The best catalysts maintain their catalytic behavior after five consecutive uses., Financial support by the Spanish Government (RT12018-099668-B-C21, PGC2018-097277-B-100, and SEV-2016-0683) is gratefully acknowledged. DD and AF-A thank the Severo Ochoa Excellence Program (SVP-2014-068669) and the "La Caixa-Severo Ochoa" Foundation, respectively, for their fellowships. NS thanks "Conselho Nacional de Desenvolvimento Cientifico y Tecnologico (CNPq)" in Brasil. Authors are also grateful to the Electron Microscopy Service (Universitat Politecnica de Valencia) for facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Copper and sulphur co-doped titanium oxide nanoparticles with enhanced catalytic and photocatalytic properties

  • Ortíz-Bustos, Josefa
  • Gómez-Ruiz, Santiago
  • Mazarío-Santa-Pau, Jaime
  • del Hierro, Isabel
  • Pérez Cortés, Yolanda
  • Domine, Marcelo Eduardo
[EN] Copper and sulphur co-doped titanium oxide nanoparticles have been prepared by the sol-gel method to develop versatile catalysts exhibiting enhanced catalytic and photocatalytic properties. Structural, morphological, chemical composition, and optical characterizations of the synthesized titanium oxide nanoparticles have been carried out in order to study the effect of incorporating copper and sulphur on the catalytic and photocatalytic activities of TiO(2)nanoparticles. Optimal incorporation of copper and sulphur to the titanium dioxide nanoparticles promotes the photocatalytic degradation of ciprofloxacin in water under irradiation of UV or visible light. Complete degradation of ciprofloxacin was achieved after 120 min with the 0.4% Cu-0.5% S-TiO(2)photocatalyst using UV and in 90 min applying visible light. Cu-S-TiO(2)nanoparticles also exhibit high activity (94-98% conversion) and excellent recyclability (with no loss of activity after 14 runs) in selective oxidation of thioanisole using H(2)O(2)as an oxidant., We gratefully acknowledge financial support from the MICINN (project RTI2018-094322-B-I00 and CTQ2017-90802-REDT). M. E. D also acknowledges MICINN (PGC2018-097277-B-I00 and SEV-2016-0683) for financial support, and J. M. thanks MINECO (CTQ2015-67592) for his PhD fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chemoenzymatic Synthesis of 5-Hydroxymethylfurfural (HMF) Derived Plasticizers by Coupling HMF Reduction with Enzymatic Esterification

  • Arias, Karen S.|||0000-0001-5649-7392
  • Carceller-Carceller, Jose Miguel
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Iborra Chornet, Sara|||0000-0003-1758-5095
[EN] Biobased plasticizers, as substitutes for phthalates, have been synthesized from 5-hydroxymethylfurfural (HMF) and carboxylic acids (or esters) through a chemoenzymatic cascade process that involves as its first step the reduction of 5-hydroxymethylfurfural into 2,5-bis(hydroxymethyl)furan (BHMF), followed by the esterification of BHMF with carboxylic acids (or esters) by using a supported lipase (Novozym 435). The reduction of HMF into BHMF is performed by using monodisperse metallic Co nanoparticles with a thin carbon shell (Co@C) with high activity and selectivity. After optimization of reaction conditions (temperature, hydrogen pressure, and solvent), it is possible to achieve 97% conversion of HMF with 99% selectivity to BHMF after 2 h reaction time. The reduction of HMF and esterification of BHMF using carboxylic acids or vinyl esters as acyl donors by lipase are optimized separately in batch and in fixed-bed continuous reactors. The coupling of two flow reactors (for reduction and subsequent esterification) working under optimized reaction conditions affords the diesters of BHMF in roughly 90% yield with no loss of activity during 60 h of operation., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through "Severo Ochoa" Excellence Programme (SEV-2016-0683) and the PGC2018-097277-B-100 (MCIU/AEI/FEDER, UE) project. The authors also thank the Microscopy Service of UPV for kind help with measurements. JMC thanks UPV for a predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthetic Routes for Designing Furanic and Non Furanic Biobased Surfactants from 5-Hydroxymethylfurfural

  • Velty, Alexandra|||0000-0002-8263-4570
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] 5-hydroxymethylfurfural (HMF) is one of the most valuable biomass platform molecules, enabling the construction of a plethora of high value-added furanic compounds. In particular, in the last decade, HMF has been considered as a starting material for designing biobased surfactants, not only because of its renewability and carbon footprint, but also because of its enhanced biodegradability. This Review presents recent examples of the different approaches to link the hydrophilic and lipophilic moieties into the hydrophobic furan (and tetrahydrofuran) ring, giving a variety of biobased surfactants that have been classified here according to the charge of the head polar group. Moreover, strategies for the synthesis of different non-furanic structures surfactant molecules (such as levulinic acid, cyclopentanols, and aromatics) derived from HMF are described. The new HMF-based amphiphilic molecules presented here cover a wide range of hydrophilic-lipophilic balance values and have suitable surfactant properties such as surface tension activity and critical micelle concentration, to be an important alternative for the replacement of non-sustainable surfactants., This work has been supported by the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683) and the PGC2018-097277-B-100 (MCIU/AEI/FEDER, UE) project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

From biomass-derived furans to aromatic compounds: design of Al-Nb-SBA-15 mesoporous structures and study of their acid properties on catalytic performance

  • Elias, Veronica R.
  • Ferrero, Gabriel O.
  • Idriceanu, Madalina Georgiana
  • Eimer, Griselda A.
  • Domine, Marcelo Eduardo
[EN] Renewable p-xylene was successfully attained via aromatization reaction of bio-derived 2,5-DMF with ethylene over Al-Nb-SBA-15 mesoporous materials with enhanced acid properties., Financial support by CSIC (Spain) through the project COOPB-20415 and the Spanish Government (MICINN, projects PGC2018-097277-B-I00 and PID2021-125897-B-I00) and by Argentinean Government through the project ANPCYT-PICT-2020-SERIEA-00918 are gratefully acknowledged. Authors also thank M. Parreno Romero and the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tuning zirconia-supported metal catalysts for selective one-step hydrogenation of levoglucosenone

  • Mazarío-Santa-Pau, Jaime
  • Chávez-Sifontes, Marvin
  • Spanevello, Rolando A.
  • Comba, María B.
  • Suárez, Alejandra G.
  • Parreño-Romero, Miriam
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Domine, Marcelo Eduardo
[EN] Levoglucosenone, directly produced from cellulose-containing residual biomass via pyrolysis treatments, is believed to be a promising bio-renewable platform for both fine and commodity chemicals. In this work, the possibilities given by tuneable catalysts based on Pd and Pt supported on metallic oxides to produce the desired product in the one-pot hydrogenation of levoglucosenone are evaluated. Particularly, the excellent catalytic performance of Pd/ZrO2 and Pt/ZrO2 type materials for the synthesis of dihydrolevoglucosenone (or Cyrene) and levoglucosanol, respectively, during the mild hydrogenation of levoglucosenone is demonstrated. In the Cyrene synthesis, the Pd/t-ZrO2 material showed the best catalytic activity compared to other Pd-supported on metallic oxides. This catalyst achieved nearly 95% yields of Cyrene by working under mild reaction conditions, with very low catalyst loadings (¿3 wt%) and using water as the solvent. On the other hand, the one-pot hydrogenation of levoglucosenone to levoglucosanol is reported for the first time with a Pt-based heterogeneous catalyst (Pt/ZrO2-mix, yield ¿90%), by working at low temperatures and mild H2 pressures with water as the solvent. Comparison of the results attained with other Pt-supported metallic oxides let us to conclude that the metal crystal facets (specifically the 100 facet) play an important role in the hydrogenation process to give levoglucosanol selectively. In addition, the stability and re-usability of both catalysts under operational conditions are also evaluated. Finally, catalytic tests including the use of crude bio-liquids obtained from cellulose-rich biomass pyrolysis and containing ¿66 wt% of levoglucosenone are also assayed, thus demonstrating the possibility of scaling-up the process over these metals supported on zirconia catalysts., Financial support by the Spanish Government (CTQ-201567592, SEV-2016-0683 and PGC2018-097277-B-100) is gratefully acknowledged. R.S. thanks the CONICET financial support (CONICET-CSIC, PVCE Program, RD 4183/15). J.M. thanks MICINN (CTQ2015-67592) for the PhD fellowship. Authors also thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Isomerization of Glucose-to-Fructose in Water over a Continuous Flow Reactor using Ca-Al Mixed Oxide as Heterogeneous Catalyst

  • Ventura, Maria
  • Mazarío-Santa-Pau, Jaime
  • Domine, Marcelo Eduardo
[EN] This work reports the continuous isomerization of glucose to fructose in aqueous media under mild conditions using a mixed oxide hydrotalcite-derived catalyst based on Ca and Al. Different operational parameters of the continuous flow fix-bed catalytic reactor system were studied. At the optimal conditions, the Ca-Al-based catalyst achieved a very high conversion and almost quantitative selectivity towards fructose, this being one of the few successful examples of a heterogeneous catalyst capable of carrying out this reaction in a continuous process. Importantly, catalytic activity held steady during four hours on stream, and slight deactivation occurring could be practically overcome by thermal regeneration of the catalyst., Grant PGC2018-097277-B-I00 funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe", and the financial support by the Spanish Government (SEV-2016-0683) and Generalitat Valenciana (GVA, PROMETEO/2018/006) are gratefully acknowledged. Authors also thank the ITQ for the technical support, and the Electron Microscopy Service of Universitat Politecnica de Valencia for instrumental facilities. J.M. thanks the Spanish Government (CTQ-2015-67592) for his PhD fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Selective Conversion of HMF into 3-Hydroxymethylcyclopentylamine through a One-Pot Cascade Process in Aqueous Phase over Bimetallic NiCo Nanoparticles as Catalyst

  • Hurtado-Cebrián, Beatriz
  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Iborra Chornet, Sara|||0000-0003-1758-5095
[EN] 5-hydroxymethylfurfural (HMF) has been successfully valorized into 3-hydroxymethylcyclopentylamine through a one-pot cascade process in aqueous phase by coupling the hydrogenative ring-rearrangement of HMF into 3-hydroxymethylcyclopentanone (HCPN) with a subsequent reductive amination with ammonia. Mono- (Ni@C, Co@C) and bimetallic (NiCo@C) nanoparticles with different Ni/Co ratios partially covered by a thin carbon layer were prepared and characterized. Results showed that a NiCo catalyst, (molar ratio Ni/Co=1, Ni0.5Co0.5@C), displayed excellent performance in the hydrogenative ring-rearrangement of HMF into HCPN (>90 % yield). The high selectivity of the catalyst was attributed to the formation of NiCo alloy structures as hydrogenating sites that limited competitive reactions such as the hydrogenation of furan ring and the over-reduction of the formed HPCN. The subsequent reductive amination of HPCN with aqueous ammonia was performed giving the target cyclopentylaminoalcohol in 97 % yield. Moreover, the catalyst exhibited high stability maintaining its activity and selectivity for repeated reaction cycles., This work has been supported by the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683) and the PGC2018-097277-B-100 (MCIU/AEI/FEDER, UE) project. The authors also thank Microscopy Service of UPV for the TEM measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hydrothermal Synthesis of Ruthenium Nanoparticles with a Metallic Core and a Ruthenium Carbide Shell for Low-Temperature Activation of CO2 to Methane

  • Cored-Bandrés, Jorge
  • Garcia-Ortiz, Andrea
  • Liu, Lichen
  • Chuang, Cheng-Hao
  • Chan, Ting-Shan
  • Escudero, Carlos
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Ruthenium nanoparticles with a core-shell structure formed by a core of metallic ruthenium and a shell of ruthenium carbide have been synthesized by a mild and easy hydrothermal treatment. The dual structure and composition of the nanoparticles have been determined by synchrotron X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS) analysis, and transmission electron microscopy (TEM) imaging. According to depth profile synchrotron XPS and X-ray diffraction (XRD) analysis, metallic ruthenium species predominate in the inner layers of the material, ruthenium carbide species being located on the upper surface layers. The ruthenium carbon catalysts presented herein are able to activate both CO2 and H-2, exhibiting exceptional high activity for CO2 hydrogenation at low temperatures (160-200 degrees C) with 100% selectivity to methane, surpassing by far the most active Ru catalysts reported up to now. On the basis of catalytic studies and isotopic (CO)-C-13/(CO2)-C-12/H-2 experiments, the active sites responsible for this unprecedented activity can be associated with surface ruthenium carbide (RuC) species, which enable CO2 activation and transformation to methane via a direct CO2 hydrogenation mechanism. Both the high activity and the absence of CO in the gas effluent confer relevance to these catalysts for the Sabatier reaction, a chemical process with renewed interest for storing surplus renewable energy in the form of methane., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through "Severo Ochoa" Excellence Programme (SEV-2016-0683) and the PGC2018-097277-B-100 (MCIU/AEI/FEDER, UE) project. The authors also thank the Microscopy Service of UPV for kind help with measurements. A G.O. thanks "Severo Ochoa" Programme (SEV-2016-0683) for a predoctoral fellowship. C.-H.C. acknowledges financial support from MOST project 107-2112-M-032-005. J.C. thanks the Spanish Government (MINECO) for a "Severo Ochoa" grant (BES-2015-075748). The authors are thankful for the support of the ALBA Synchrotron Light Source staff for the successful performance of the measurements at CIRCE beamline (BL24).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structure-reactivity relations in Cu/ZrO2 catalysed glycerol dehydration to acetol in continuous flow

  • Mazarío-Santa-Pau, Jaime
  • Jampaiah, Deshetti
  • Villasante-Iturria, Pablo
  • Wilson, Karen
  • Lee, Adam
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Domine, Marcelo Eduardo
[EN] The selective dehydration of glycerol to hydroxyacetone (acetol) was studied in a continuous flow fixed-bed reactor with CuO supported on monoclinic (m-) or tetragonal (t-) ZrO2 nanoparticles. Catalysts were characterised by ICP, N-2 physisorption, powder XRD, HR-TEM and SEM-EDS, N2O titration, and NH3- and CO2-TPD. Quasi-in situ XPS reveals the impact of zirconia phase on copper speciation, with m-ZrO2 preferentially stabilising Cu(I) species, whose presence correlates with enhanced catalytic performance. In situ FTIR of 1,2-propanediol and glycerol evidenced Cu(I) promote desorption of a CO containing intermediate. Solvent selection strongly influenced catalyst reactivity, with methanol less prone to competitive adsorption than water, and favouring the genesis of Cu(I) species. Cu/m-ZrO2 achieved 60% yield of the desired acetol at 240 degrees C, maintaining >= 50% yield over three consecutive regeneration cycles, being one of the most efficient catalysts based on earth abundant metals for continuous glycerol dehydration to acetol under the present conditions., Authors thank grants PGC2018-097277-B-I00 and PID2021-125897-OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", and the Australian Research Council for funding (DP200100204, DP200100313, LP190100849). J. M. also thanks Spanish Government (CTQ-2015-67592) for his FPI fellowship. The authors also thank J. M. Salas for his help with IR measurements, and M. Parreno Romero and the Electron Microscopy Service of Universitat Politecnica de Valencia for their support during electron microscopy analyses.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Selective synthesis of citrus flavonoids prunin and naringenin using heterogeneized biocatalyst on graphene oxide

  • Carceller-Carceller, Jose Miguel
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Martínez Galán, Julián Paul
  • Monti, Rubens
  • Bassan, Juliana Cristina
  • Filice, Marco
  • Yu, Jihong
[EN] Production of citrus flavonoids prunin and naringenin was performed selectively through the enzyme hydrolysis of naringin, a flavonoid glycoside abundant in grapefruit wastes. To produce the monoglycoside flavonoid, prunin, crude naringinase from Penicillium decumbens was purified by a single purification step resulting in an enzyme with high -rhamnosidase activity. Both crude and purified enzymes were covalently immobilized on graphene oxide. The activity of the immobilized enzymes at different pH levels and temperatures, and the thermal stability were determined and compared with those exhibited by the free naringinases using specific substrates: p-nitrophenyl--d-glucoside (Glc-pNP) and p-nitrophenyl-alpha-l-rhamnopyranoside (Rha-pNP). The crude and purified naringinase supported on GO were tested in the hydrolysis of naringin, giving naringenin and prunin, respectively, in excellent yields. The supported enzymes can be reused many times without loss of activity. The naringinase stabilized on GO has high potential to produce the valuable citrus flavonoids prunin and naringenin., Authors acknowledge the financial support from MICINN Project CTQ-2015-67592-P and Program Severo Ochoa (SEV-2016-0683). JVC thanks Universitat Politecnica de Valencia for predoctoral fellowships. JY and AC thank the support from the National Natural Science Foundation of China (Grant No. 21320102001) and the 111 Project (Grant No. B17020).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bimetallic platinum/iridium modified mesoporous catalysts applied in the hydrogenation of HMF

  • Brenda Ledesma
  • Juliana M. Juárez
  • Mazarío-Santa-Pau, Jaime
  • Andrea Beltramone
  • Domine, Marcelo Eduardo
[EN] Catalytic transformation of 5-hydroxymethylfurfural (HMF) to produce 2,5-dimethylfuran (2,5-DMF) was studied over bimetallic (PtIr) and monometallic (Pt) catalysts supported on CMK-3 and SBA-15 mesoporous materials. The optimum temperature and hydrogen pressure for the maximum production of 2,5-DMF were 120 degrees C and 15 atm, respectively. Increases in temperature and pressure decreased the selectivity to 2,5-DMF. The catalysts were broadly characterized by different techniques, such as XRD, N-2-isotherms, XPS, TPR, TEM and NH3-TPD. It was found that the metallic particles were well reduced and highly dispersed on the surface of supports having large surface area and narrow pore size distribution. The PtIr alloy species catalytic sites were very active and selective towards the formation of the desired 2,5-DMF. PtIr-CMK-3 catalyst showed an excellent activity, selectivity and stability to be applied in this process., NANOTEC, CONICET, Universidad Tecnologica Nacional, Maestro Lopez y Cruz Roja Argentina. We acknowledge the financial support provided by CONICET Argentina, PIP CONICET11220120100218CO. 2014-2018. J.M. and M.E.D thanks Spanish Government financial support (CTQ2015-67592 and PGC2018-097277-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Magnetic graphene oxide as a platform for the immobilization of cellulases and xylanases: Ultrastructural characterization and assessment of lignocellulosic biomass hydrolysis

  • Paz-Cedeno, Fernando Roberto
  • Donato, Ricardo Keitel
  • Godoy, Anna Paula
  • de Paula, Ariela Veloso
  • Monti, Rubens
  • Masarin, Fernando
  • Carceller-Carceller, Jose Miguel
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] For producing second-generation ethanol (cellulosic ethanol) and other value-added bioproducts, magnetic graphene oxide (GO-MNP) was synthesized in this work and used as the immobilization support for an industrial cellulase-and xylanase-containing preparation. GO-MNP characterization by TEM, SEM and ATR-FTIR spectroscopy showed that the magnetic nanoparticles are homogeneously distributed onto the GO sheets surface. The enzymatic preparation was immobilized by means of carbodiimide cross-linking chemistry using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide and N-hydroxysuccinimide (NHS). The supported final biocatalyst (GO-MNP-Enz) showed high activity for the hydrolysis of pretreated sugarcane bagasse (PSB) and presented relative endoglucanase, xylanase, beta-glucosidase, and beta-xylosidase activities of 70%, 66%, 88%, and 70%, respectively, after 10 cycles of hydrolysis of their respective substrates. The biocatalyst also maintained approximately 50% and 80% of its efficiency for cellulose and xylan hydrolysis, respectively, being the TOF (g.g(-1).h(-1)) the highest observed when compared with previous results reported in literature. These findings suggest that GO-MNP-Enz may be a prospective candidate for industrial applications such as second-generation ethanol production. (C) 2020 Elsevier Ltd. All rights reserved., Sao Paulo State Research Support Foundation (FAPESP) contract number 2018/06241e3 funding this work. Coordination of Improvement of Higher Education Personnel (CAPES) funding the doctoral scholarship of Fernando Roberto Paz-Cedeno in Brazil and in the Universitat Politecnica de Valencia (UPV), Institute of Chemical Technology (ITQ), Valencia, Spain. Authors acknowledge financial support from PGC2018-097277-B-100 (MCIU/AEI/FEDER,UE) project and Severo Ochoa Program (SEV-2016-0683).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel Sn-Nb-Based Catalysts with Enhanced Acidity and Water Resistance for the Aqueous-Phase Condensation of Light Oxygenated Compounds

  • Fernandez-Arroyo-Naranjo, Alberto
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Domine, Marcelo Eduardo
[EN] Upgrading of light oxygenated compounds present in aqueous effluents obtained from primary treatments of biomass (pyrolysis, fermentation) is imperative in the current bio-refinery business model development. In this work, efficient and water-resistant catalysts are needed for the valorization of these residual streams via aqueous-phase condensation reactions. Based on our previous results, where Nb-based materials stand as promissory catalysts, the activity of tin-niobium mixed oxides in the condensation of light oxygenates is here studied using a representative aqueous model mixture including acetic acid, propanal, acetol, and ethanol. Sn-Nb mixed oxides preparation via co-precipitation allow obtaining homogenous rutile-phase materials with enhanced textural and acid properties compared to commercial catalysts or Sn-Nb materials synthesized by different procedures. This work displays the potential of Sn-Nb rutile-phase catalysts with inherent hydrophobic characteristics for the conversion of light oxygenated compounds present in bio-derived aqueous effluents into hydrocarbons and aromatics useful for liquid fuel applications. These pseudo-crystalline Sn-Nb materials show remarkable condensation activity by exposing Lewis acid sites capable of activating carbonyl compounds even in the presence of large amounts of water and organic acids. Therefore, these novel acid catalysts exhibit outstanding performance and stability in complex acidic aqueous environment compared to other Sn-Ti and Ce-Zr mixes oxides broadly used in these processes., Financial support by the Ministerio de Ciencia e Innovacion of Spain (PGC2018-097277-B-I00 and PID2021-125897OB-I00) is gratefully acknowledged. A. F-A. thanks La Caixa-Severo Ochoa Foundation and the Severo Ochoa Excellence Program (SVP-2014-068669) for the PhD fellowship. Authors also thank Miriam Parreno-Romero and the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tuning Ca-Al-based catalysts&apos, composition to isomerize or epimerize glucose and other sugars

  • Ventura, Maria
  • Cecilia, Juan A. A.
  • Rodriguez-Castellon, Enrique
  • Domine, Marcelo Eduardo
[EN] One of the key reactions to achieve good productivity in the transformations of cellulose derived from biomass feedstocks is the isomerization of glucose to fructose, the latest being the platform molecule for obtaining other important derivatives. In this work, Ca-Al containing catalysts based on hydrotalcite-type derived materials were used to perform the selective isomerization of glucose to fructose, and the selective epimerization of glucose to mannose, using water as the solvent under mild reaction conditions. The catalysts showed high activity (conversion = 51-87%), and excellent selectivity (63-88%) towards fructose, compared with the current industrial process based on the glucose transformation via biocatalysis. It was also possible to modulate the selectivity towards fructose or mannose by tuning the amount of basic sites of the catalysts and their composition. The combination of basic and acid sites present in the Ca-Al-based catalysts plays a key role in the reaction, a fact that is discussed in the text together with other important operational parameters. The stability and recyclability of the catalysts were tested, detecting only a small activity loss after 5 consecutive runs. The synthesis of the catalysts and their characterization are also discussed since they are one of the few cases found in the literature of this kind of hydrotalcite-type material with such a high level of Ca incorporation. Some green metrics, such as E-factor, have been calculated to evaluate our system as an environmentally friendly process., Financial support by the Spanish Government (PGC2018-097277-B-I00 and SEV-2016-0683), Generalitat Valenciana (GVA, PROMETEO/2018/006), and especially the Unesco/IUPAC/PhosAgro partnership within the program "Green Chemistry for Life" (Grant 139) is gratefully acknowledged. The authors also thank the ITQ for the technical support, and the Electron Microscopy Service of Universitat Politecnica de Valencia for instrumental facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Covalent Immobilization of Naringinase over Two-Dimensional 2D Zeolites and its Applications in a Continuous Process to Produce Citrus Flavonoids and for Debittering of Juices

  • Carceller-Carceller, Jose Miguel
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Martínez Galán, Julián Paul
  • Monti, Rubens
  • Bassan, Juliana Cristina
  • Filice, Marco
  • Yu, Jihong
[EN] The crude naringinase from Penicillium decumbens and a purified naringinase with high a-L-rhamnosidase activity could be covalently immobilized on two-dimensional zeolite ITQ-2 after surface modification with glutaraldehyde. The influence of pH and temp. on the enzyme activity (in free and immobilized forms) as well as the thermal stability were detd. using the specific substrate: p-nitrophenyl-alpha-L-rhamnopyranoside (Rha-pNP). The crude and purified naringinase supported on ITQ-2 were applied in the hydrolysis of naringin, giving the flavonoids naringenin and prunin resp. with a conversion >90% and excellent selectivity. The supported enzymes showed long term stability, being possible to perform up to 25 consecutive cycles without loss of activity, showing its high potential to produce the valuable citrus flavonoids prunin and naringenin. We have also succeeded in the application of the immobilized crude naringinase on ITQ-2 for debittering grapefruit juices in a continuous process that was maintained operating for 300 h, with excellent results., The authors acknowledge financial support from PGC2018-097277-B-100 (MCIU/AEI/FEDER,UE) project and Program Severo Ochoa (SEV-2016-0683). Jilin agreement 111 Project (Grant No. B17020). JMC thanks to Universitat Politecnica de Valencia for predoctoral fellowships.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Transforming Methyl Levulinate into Biosurfactants and Biolubricants by Chemoselective Reductive Etherification with Fatty Alcohols

  • Garcia-Ortiz, Andrea
  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Iborra Chornet, Sara|||0000-0003-1758-5095
[EN] Biomass-derived surfactants with very good surfacetension and criticalmicellar concentration properties wereobtained by conversion of methyl levulinate into methyl 4-alkoxypenta- noates through reductive etherification with aliphatic alcohols. Amongdifferent bifunctional acid/metal catalysts bestresults were obtained with Pd on carbon bearing acid sites. The reac- tion occurred through the formation of an enol ether inter- mediate followed by hydrogenation. Pd in high-density planes was the active hydrogenation species, and an optimum crystal size was found to be approximately 10 nm. The reductive etherification with aliphatic alcohols was extended to other aliphatic and cyclic ketonesand aldehydes obtained from bio- mass, and excellent results were obtained on supported Pd catalysts with the reaction route and experimentalconditions described in this work., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through "Severo Ochoa" Excellence Program (SEV-2016-0683) and the PGC2018-097277-B-100 (MCIU/AEI/FEDER, UE) project. The authors also thank the Microscopy Service of UPV for kind help on measurement. A.G.-O. thanks "Severo Ochoa" Program (SEV-2016-0683) for a predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Methyl ketones from carboxylic acids as valuable target molecules in the biorefinery

  • Marie, Olivier
  • Ignatchenko, Alexey, V.
  • Renz, Michael|||0000-0002-1101-9562
[EN] For the preparation of methyl ketones, cross Ketonic Decarboxylation, i.e., the formation of a ketone from two different carboxylic acids, and the reketonization, i.e., the transformation of a carboxylic acid into a ketone employing a ketone as alkyl transfer agent, may be interesting alternatives to classical pathways involving metalorganic reagents. The fine chemical 2-undecanone was chosen as model compound and ketonic decarboxylation and reketonization evaluated by Green Chemistry matrices, namely the carbon atom efficiency and the e-factor. The efactor of the reaction of decanoic acid with acetic acid was less than five and, therewith, in the acceptable range for bulk chemicals, when valorizing acetone (e.g., as a solvent) and considering a 90% solvent recycling. The reketonization of decanoic acid with acetone provided a different main product, namely 10-nonadecanone, with a detrimental effect on atom efficiency. By means of labeling experiments it was shown that ketonic decarboxylation is significantly faster than the reketonization reaction. The transformation of acetic acid into acetone was studied by in-situ and operando IR spectroscopy. Thereby it was found that the surface was covered by acetic acid. The lack of adsorption of acetone is a clear drawback for the reketonization of carboxylic acids. To improve the reaction outcome, and therewith, its sustainability a possibility has to be found to stabilize the ketone molecules on the surface in the presence of carboxylic acids., Financial support from the Spanish Government is acknowledged (Ministry of Science, Innovation and Universities, RTC-2017-6087-5 and PGC2018-097277-B-I00). MR is grateful to the Generalitat Valenciana for a BEST-2015 fellowship and to Dilyana Mladenova, Arturo Valero Jim ' enez and Claudia Fern ' andez de la Pena for their contributions to the experimental work of the catalytic reactions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Production of chiral alcohols from racemic mixtures by integrated heterogeneous chemoenzymatic catalysis in fixed bed continuous operation

  • Carceller-Carceller, Jose Miguel
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Mifsud, Maria
[EN] Valuable chiral alcs. have been obtained from racemic mixts. with an integrated heterogeneous chemoenzymic catalyst in a two consecutive fixed catalytic bed continuous reactor system. In the first bed the racemic mixt. of alcs. is oxidized to the prochiral ketone with a Zr-Beta zeolite and using acetone as the hydrogen acceptor. In the second catalytic bed the prochiral ketone is stereoselectively reduced with an alc. dehydrogenase (ADH) immobilized on a two dimensional (2D) zeolite. In this process, the alc. (isopropanol) formed by the redn. of acetone in the first step reduces the cofactor in the second step, and the full reaction cycle is in this way internally closed with 100% atom economy. A conversion of about 95% with ~100% selectivity to either the (R) or the (S) alc. has been obtained for a variety of racemic mixts. of alcs, The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through "Severo Ochoa" Excellence Programme (SEV-2016-0683) and the PGC2018-097277-B-100(MCIU/AEI/FEDER, UE) project. J. M. C. thanks to Universitat Politecnica de Valencia for a predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bimetallic CuFe nanoparticles as active and stable catalysts for chemoselective hydrogenation of biomass-derived platform molecules

  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Liu, Lichen
  • Garcia-Ortiz, Andrea
[EN] Bimetallic CuFe nanoparticles covered by thin carbon layers were developed as a potential substitute for noble metal catalysts and have been used for chemoselective hydrogenation of 5-(hydroxymethyl)furfural (HMF) to 2,5-bis(hydroxymethyl)furan (BHMF). Compared to Cu catalysts supported on conventional solid carriers prepared by impregnation, the CuFe@C nanoparticles are active and more stable catalysts. The spatial distribution of the immiscible Cu and Fe in the bimetallic CuFe@C nanoparticles is dependent on the Cu/Fe ratio, and moreover, an optimized Cu/Fe ratio has been found for hydrogenation of HMF. In the fresh Fe@C and CuFe@C catalysts, their surfaces are passivated and covered by FeOx, due to oxidation by air. Based on detailed structural characterization and catalytic studies, small Cu nanoparticles supported on Fe nanoparticles are proposed to be the key active sites for hydrogenation of HMF. These Cu nanoparticles can not only serve as the active sites for hydrogenation of HMF but also promote the reduction of FeOx into metallic Fe, resulting in an increased number of active sites in the bimetallic CuFe@C catalyst compared to the monometallic Cu@C and Fe@C samples, resulting in significant promotion of the catalytic activity., This work has been supported by the Spanish Government through the "Severo Ochoa Program" (SEV-2016-0683) and the PGC2018-097277-B-100 (MCIU/AEI/FEDER, UE) project. The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. A. G.-O. thanks the Severo Ochoa Program for predoctoral fellowships.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

TiO2-Supported Pd as an Efficient and Stable Catalyst for the Mild Hydrotreatment of Tar-Type Compounds

  • Raad, Zaher
  • Toufaily, Joumana
  • Hamieh, Tayssir
  • Domine, Marcelo Eduardo
[EN] The mild hydrotreatment of a model mixture of tar-type compounds (i.e., naphthalene, 1-methylnaphthalene, acenaphthylene, and phenanthrene) to produce partially hydrogenated products in the range of C9-C15 was studied over Pd supported on TiO2 possessing different crystalline phases. Pd-based catalysts were prepared and characterized by ICP analysis, XRD, N-2 adsorption isotherms, HR-TEM, and NH3-TPD, among others. The hydrotreatment activity and selectivity towards the desired hydrogenated products (i.e., tetralin and others) increased with both the acidity and surface area of the catalyst, along with the presence of small and well distributed Pd nanoparticles. For the selected 1.3 wt% Pd/TiO2 nano catalyst, the operational conditions for maximizing tar conversion were found to be 275 degrees C, 30 bar of H-2, and 0.2 g of catalyst for 7 h. The catalyst revealed remarkable hydrotreatment activity and stability after several reuses with practically no changes in TiO2 structure, quite low carbon deposition, and any Pd leaching detected, thus maintaining both a small Pd particle size and adequate distribution, even after regeneration of the catalyst. Additionally, the Pd/TiO2 nano catalyst was demonstrated to be more active than other commonly used metal/alumina and more selective than metal/USY zeolites in the mild hydrotreatment of tar-type compounds, thus providing an efficient catalytic route for obtaining partially hydrogenated C9-C15 hydrocarbons useful as jet-fuel components or additives (improvers), as well as chemicals and solvents for industrial applications., This research was partially funded by Spanish Government (MICINN: PGC2018-097277-BI00 and Severo Ochoa Pro-gram: SEV-2016-0683).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

MOF-Mediated Synthesis of Supported Fe-Doped Pd Nanoparticles under Mild Conditions for Magnetically Recoverable Catalysis

  • Darawsheh, Mohanad D.
  • Mazarío-Santa-Pau, Jaime
  • Lopes, Christian W.
  • Gimenez-Marques, Monica
  • Meira, Debora M.
  • Martínez, Jordan Santiago
  • Minguez Espallargas, Guillermo
  • Domine, Marcelo Eduardo
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Metal-organic framework (MOF)-driven synthesis is considered as a promising alternative for the development of new catalytic materials with well-designed active sites. This synthetic approach is used here to gradually transform a new bimetallic MOF, with Pd and Fe as the metal components, by the in situ generation of aniline under mild conditions. This methodology results in a compositionally homogeneous nanocomposite formed by Fe-doped Pd nanoparticles that, in turn, are supported on iron oxide-doped carbon. The nanocomposite has been fully characterized by several techniques such as IR and Raman spectroscopy, TEM, XPS, and XAS. The performance of this nanocomposite as an heterogeneous catalyst for hydrogenation of nitroarenes and nitrobenzene coupling with benzaldehyde has been evaluated, proving it to be an efficient and reusable catalyst., This work has been supported by the European Union (ERC2016-CoG 724681-S-CAGE), by the Spanish MICINN (Structures of Excellence Severo Ochoa SEV-2016-0683 and Maria de Maeztu CEX2019-000919-M; projects CTQ2017-89528-P, CTQ2015-67592, PGC2018-097277-B-100, and RTI2018-096399A-I00 co-financed by FEDER). We also thank the Generalitat Valenciana (PROMETEO/2018/006 and PROMETEU/2019/066). G.M.E. and P.O.-B. thank MICINN for their "Ramon y Cajal" fellowships. M.G.-M thanks support of a fellowship from "la Caixa" Foundation (LCF/BQ/PI19/11690022) and Generalitat Valenciana (SEJI/2020/036). J.M. thanks MICINN for his PhD fellowship (CTQ2015-67592). The authors also thank the Electron Microscopy Service of Universitat Politicnica de Val~ncia for their support, M. P. Romero for her assistance with TEM measurements and Prof. E. Rodr~guez-Castellin for discussions on the XPS spectra interpretation. This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory and was supported by the U.S. DOE under contract no. DE-AC02-06CH11357, and the Canadian Light Source and its funding partners.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stability of the Cellic CTec2 enzymatic preparation immobilized onto magnetic graphene oxide: Assessment of hydrolysis of pretreated sugarcane bagasse

  • Paz-Cedeno, Fernando Roberto
  • Keitel Donato, Ricardo
  • Ruiz Rodriguez, Anselmo Fortunato
  • Morales, Marco Antonio
  • Solorzano-Chavez, Eddyn Gabriel
  • Miranda Roldán, Ismael Ulises
  • Veloso de Paula, Ariela
  • Masarin, Fernando
  • Carceller-Carceller, Jose Miguel
  • Iborra Chornet, Sara|||0000-0003-1758-5095
[EN] Sugarcane bagasse (SB) was subjected to enzymatic hydrolysis using an enzyme cocktail immobilized on magnetic graphene oxide particles (GO-MNP). The thermal, storage, pH, and operational stabilities of the immobilized enzymes, including exoglucanase, endoglucanase, 13-glucosidase, xylanase, and 13-xylosidase, were evaluated. The half-life of the biocatalyst (GO-MNP-Enz) was longer than that of the free enzymes at temperatures above 45 degrees C, with the exception of endoglucanase. SB was subjected to pretreatments generating sulfiteNaOH pretreated SB (SSB) and chlorite pretreated SB (CSB). The enzymatic hydrolysis of SSB and CSB was evaluated using free enzymes and GO-MNP-Enz. The cellulose and xylan conversion of SSB using free enzymes was higher than using GO-MNP-Enz; however, a similar result was obtained after 72 h. This did not occur in the hydrolysis of CSB, in which at the end of 72 h, conversion using GO-MNP-Enz did not reach the levels obtained with free enzymes. GO-MNP-Enz was successfully reused in several SSB hydrolysis cycles, maintaining an efficiency of approximately 80% and presenting the highest turnover frequency when compared with previous results reported in literature. Finally, these results show that the immobilization of cellulases and xylanases improves their operational stability and the obtained GO-MNP-Enz can be used for various SB hydrolysis cycles., FAPESP, contract number 2018/06241-3 funding this paper. Coordination of Improvement of Higher Education Personnel (CAPES) financed the doctoral scholarship of Fernando Roberto PazCedeno in Brazil and in the Universitat Politecnica de Valencia (UPV), Institute of Chemical Technology (ITQ), Valencia, Spain. Authors acknowledge financial support from PGC2018-097277-B-100 (MCIU/AEI/FEDER, UE) project and Program Severo Ochoa (SEV-2016-0683).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enzymatic and chemo-enzymatic strategies to produce highly valuable chiral amines from biomass with omega-transaminases on 2D zeolites

  • Carceller-Carceller, Jose Miguel
  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Amino transaminases (ATAs) have been supported on a 2D ITQ-2 zeolite through electrostatic interactions, resulting in a highly stable active biocatalyst to obtain a variety of valuable chiral amines starting from prochiral ketones derived from biomass. We have extended the biocatalyst applications by designing a chemo-enzymatic process that allows, as the first step, prochiral ketones to be obtained from biomass-derived compounds through an aldol condensation-reduction step using a bifunctional metal/base catalyst. The prochiral ketone is subsequently converted into the chiral amine using the immobilized ATA. We show that it is feasible to couple both steps in a semi-continuous process to produce industrially relevant chiral amines with yields of >95% and similar to 100% enantiomer excess., This work was supported by the SpanishGovernment through the `Severo Ochoa Program' (SEV-2016-0683) and the PGC2018097 277-B-100 (MCIU/AEI/FEDER, UE) Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Highly dispersed copper oxide on silica: Towards an efficient catalyst for continuous glycerol dehydration to acetol

  • Mazarío-Santa-Pau, Jaime
  • Cecilia, Juan A.
  • Rodríguez-Castellón, Enrique
  • Domine, Marcelo Eduardo
[EN] In most current processes aimed at producing biodiesel glycerol is still a co-product, and its valorisation is essential for the biorefinery. This work relies on previous results showing the dependence of the selective dehydration of glycerol to acetol (hydroxyacetone) on achieving a moderate acidity and the redox functionality of copper to complete the chemical process. In this sense, this reaction was studied using CuO supported on silica. Different silicas and copper incorporation methodologies were investigated to develop the best CuO/SiO2 material. Interestingly, these CuO-based materials developed acidity and became more active when increasing the copper oxide dispersion, thereby going from poorly to intensely effective to dehydrate glycerol selectively to acetol. Catalysts were characterised by different techniques (i.e., ICP, N2 adsorption, XRD, TPR, HR-TEM, etc.) to explain the differences observed in catalytic activity and acetol yield based on their physicochemical properties., Financial support by Spanish Government (CTQ-2015-67592, PGC2018-097277-B-I00 and SEV-2016-0683) is gratefully acknowl-edged. J.M. thanks Spanish Government (CTQ-2015-67592) for the Ph.D. fellowship. Authors also thank Miriam Parreno Romero and the Electron Microscopy Service of Universitat Polite`cnica de València for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Continuous catalytic process for the selective dehydration of glycerol over Cu-based mixed oxide

  • Mazarío-Santa-Pau, Jaime
  • Ventura, María
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Domine, Marcelo Eduardo
[EN] The selective dehydration of glycerol to hydroxyacetone (acetol) was studied with Cu-based mixed oxides derived from hydrotalcite as catalysts in a continuous flow fix-bed reactor. Catalysts were prepared by co-precipitation and characterized by ICP, N-2 adsorption, XRD, NH3-TPD, CO2-TPD, TPR and TEM. Different parameters were investigated to develop the most appropriate material as well as to determine the function of every metallic species. The optimized Cu-Mg-AlOx offered approximate to 60% acetol selectivity at >90% glycerol conversion (approximate to 80% liquid yield, up to TOS = 9 h). The catalyst could be regenerated by calcination, achieving full activity recovery after five re-cycles. "In-situ" FTIR and XPS measurements evidenced that the presence of Cu, specially the most active Cu1+ species, was essential to carry out the dehydration to acetol with high reaction rates, and to form the preferred intermediate (with C=O group); although a minor contribution from Cu-0 and Cu2+ species could not be discarded., Financial support by Spanish Government (CTQ-2015-67592, PGC2018-097277-B-100 and SEV-2016-0683) and PhosAgro/UNESCO/IUPAC Partnership (Proj. 139) is gratefully acknowledged. J.M. also thanks Spanish Government (CTQ-2015-67592) for his FPI fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tio2-supported pd as an efficient and stable catalyst for the mild hydrotreatment of tar-type compounds

  • Raad, Zaher
  • Toufaily, Joumana
  • Hamieh, Tayssir
  • Dómine, Marcelo Eduardo
The mild hydrotreatment of a model mixture of tar-type compounds (i.e., naphthalene, 1-methylnaphthalene, acenaphthylene, and phenanthrene) to produce partially hydrogenated products in the range of C9–C15 was studied over Pd supported on TiO2 possessing different crystalline phases. Pd-based catalysts were prepared and characterized by ICP analysis, XRD, N2 adsorption isotherms, HR-TEM, and NH3-TPD, among others. The hydrotreatment activity and selectivity towards the desired hydrogenated products (i.e., tetralin and others) increased with both the acidity and surface area of the catalyst, along with the presence of small and well distributed Pd nanopar-ticles. For the selected 1.3 wt%Pd/TiO2 nano catalyst, the operational conditions for maximizing tar conversion were found to be 275 °C, 30 bar of H2, and 0.2 g of catalyst for 7 h. The catalyst revealed remarkable hydrotreatment activity and stability after several reuses with practically no changes in TiO2 structure, quite low carbon deposition, and any Pd leaching detected, thus maintaining both a small Pd particle size and adequate distribution, even after regeneration of the catalyst. Addition-ally, the Pd/TiO2 nano catalyst was demonstrated to be more active than other commonly used metal/alumina and more selective than metal/USY zeolites in the mild hydrotreatment of tar-type compounds, thus providing an efficient catalytic route for obtaining partially hydrogenated C9– C15 hydrocarbons useful as jet-fuel components or additives (improvers), as well as chemicals and solvents for industrial applications., This research was partially funded by Spanish Government (MICINN: PGC2018-097277-BI00 and Severo Ochoa Pro-gram: SEV-2016-0683).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Isomerization of Glucose-to-Fructose in Water over a Continuous Flow Reactor using Ca−Al Mixed Oxide as Heterogeneous Catalyst

  • Ventura, María
  • Mazarío, Jaime
  • Dómine, Marcelo Eduardo
This work reports the continuous isomerization of glucose to fructose in aqueous media under mild conditions using a mixed oxide hydrotalcite-derived catalyst based on Ca and Al. Different operational parameters of the continuous flow fix-bed catalytic reactor system were studied. At the optimal conditions, the Ca−Al-based catalyst achieved a very high conversion and almost quantitative selectivity towards fructose, this being one of the few successful examples of a heterogeneous catalyst capable of carrying out this reaction in a continuous process. Importantly, catalytic activity held steady during four hours on stream, and slight deactivation occurring could be practically overcome by thermal regeneration of the catalyst., Grant PGC2018-097277-B-I00 funded by MCIN/AEI/10.13039/ 501100011033 and “ERDF A way of making Europe“, and the financial support by the Spanish Government (SEV-2016-0683) and Generalitat Valenciana (GVA, PROMETEO/2018/006) are gratefully acknowledged. Authors also thank the ITQ for the technical support, and the Electron Microscopy Service of Universitat Politècnica de València for instrumental facilities. J.M. thanks the Spanish Government (CTQ-2015-67592) for his PhD fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of Ti Incorporation to Bimetallic Mesoporous Carbon in the Production of 2,5-Dimethylfuran from Biomass Derivatives

  • Ledesma, Brenda C.
  • Juárez, Juliana M.
  • Dómine, Marcelo Eduardo
  • Beltramone, Andrea R.
Monometallic and bimetallic supported catalysts were developed to produce 2,5-dimethylfuran (DMF) trough hydrogenolysis of 5-(hydroxymethyl)furfural (HMF). Detailed physicochemical characterization was done to understand structure–activity correlation. Through a series of experiments and comparatives tests, the synergistic effect among Pt, Ir, and Ti incorporated in the support was investigated. Results revealed that using the titanium contained ordered mesoporous carbon, synthesized by a novel technique, high selectivity to DMF was achieved. In the case of the best catalyst PtIr-TiC, the good activity and excellent selectivity to the desired product DMF (98% yield) was related to the high hydrogenating capacity of the bimetallic sites, the acid support characteristics and the high metal nanoparticles dispersion achieved on the mesoporous titanium modified carbon support., NANOTEC, CONICET, Universidad Tecnológica Nacional, Maestro López y Cruz Roja Argentina. We acknowledge the financial support provided by CONICET Argentina, PIP CONICET 11220120100218CO 2020. M.E.D thanks Spanish Government financial support (CTQ2015-67592 and PGC2018-097277-B-I00), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Isomerization of Glucose-to-Fructose in Water over a Continuous Flow Reactor using Ca−Al Mixed Oxide as Heterogeneous Catalyst

  • Ventura, María
  • Mazarío, Jaime
  • Dómine, Marcelo Eduardo
This work reports the continuous isomerization of glucose to fructose in aqueous media under mild conditions using a mixed oxide hydrotalcite-derived catalyst based on Ca and Al. Different operational parameters of the continuous flow fix-bed catalytic reactor system were studied. At the optimal conditions, the Ca−Al-based catalyst achieved a very high conversion and almost quantitative selectivity towards fructose, this being one of the few successful examples of a heterogeneous catalyst capable of carrying out this reaction in a continuous process. Importantly, catalytic activity held steady during four hours on stream, and slight deactivation occurring could be practically overcome by thermal regeneration of the catalyst., Grant PGC2018-097277-B-I00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe“, and the financial support by the Spanish Government (SEV-2016-0683) and Generalitat Valenciana (GVA, PROMETEO/2018/006) are gratefully acknowledged. Authors also thank the ITQ for the technical support, and the Electron Microscopy Service of Universitat Politècnica de València for instrumental facilities. J.M. thanks the Spanish Government (CTQ-2015-67592) for his PhD fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A tandem process for in situ H2O2 formation coupled with benzyl alcohol oxidation using Pd-Au bimetallic catalysts

  • Martínez, Jordan
  • Mazarío, Jaime
  • Gutiérrez-Tarriño, S.
  • Galdeano-Ruano, Carmen
  • Gaona-Miguélez, José
  • Dómine, Marcelo Eduardo
  • Oña-Burgos, Pascual
Alcohol oxidation is one of the most important industrial organic reactions. Traditionally, the best-suited catalysts are Pd, Pt and Au supported nanoparticles. The research community has recently started developing strategies for synthesizing carbon-supported Pd/Au bimetallic nanoparticles (NPs), leading to higher activities and selectivities. However, the metallic active species in these catalysts are usually generated using sodium borohydride (NaBH), which is not synthetically easy to reproduce. In fact, minor modifications in pH, concentration and/or other parameters have a prominent effect on the nature of the promoted material. In this work, a robust process involving dihydrogen flow (H) at 200 °C as a reducing agent for synthesizing Pd/Au supported bimetallic materials was considered an alternative to the common pathway. The physicochemical properties of the materials derived from different reducing reagents and of varying composition ranges were studied using HR-TEM, XRD, CO chemisorption, and XPS. Their stability and activity were also tested for benzyl alcohol oxidation to benzaldehyde under mild reaction conditions (60 °C, water as the solvent, and PO = 1.5 bar). Notably, a catalyst from the hydrogen reduction process with a metal composition of 0.8%Pd-0.2%Au/C consisting of bimetallic clusters (≈1.5 nm) proved to be the best material (C = 94%, S = 99%). Catalytic performances were strongly correlated with structural properties, such as nanoparticle size and distribution, which, in turn, were affected by the reduction step and the metal composition range. Finally, the influence of oxidants on benzyl alcohol oxidation has also been studied, along with the first approach for the tandem in situ formation of HO coupled with alcohol oxidation., The authors are thankful for the financial support by the Spanish Government (RTI2018-096399-A-I00 and PGC2018-097277-B-I00 funded by MICINN/AEI/10.13039/501100011033) and Junta de Andalucía (P20 01027 and PYC 20 RE 060 UAL). The electron microscopy service of the UPV is acknowledged for their help in sample characterization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly dispersed copper oxide on silica: Towards an efficient catalyst for continuous glycerol dehydration to acetol

  • Mazarío, Jaime
  • Cecilia, Juan Antonio
  • Rodríguez-Castellón, Enrique
  • Dómine, Marcelo Eduardo
In most current processes aimed at producing biodiesel glycerol is still a co-product, and its valorisation is essential for the biorefinery. This work relies on previous results showing the dependence of the selective dehydration of glycerol to acetol (hydroxyacetone) on achieving a moderate acidity and the redox functionality of copper to complete the chemical process. In this sense, this reaction was studied using CuO supported on silica. Different silicas and copper incorporation methodologies were investigated to develop the best CuO/SiO material. Interestingly, these CuO-based materials developed acidity and became more active when increasing the copper oxide dispersion, thereby going from poorly to intensely effective to dehydrate glycerol selectively to acetol. Catalysts were characterised by different techniques (i.e., ICP, N adsorption, XRD, TPR, HR-TEM, etc.) to explain the differences observed in catalytic activity and acetol yield based on their physicochemical properties., Financial support by Spanish Government (CTQ-2015-67592, PGC2018-097277-B-I00 and SEV-2016-0683) is gratefully acknowledged. J.M. thanks Spanish Government (CTQ-2015-67592) for the Ph.D. fellowship. Authors also thank Miriam Parreño Romero and the Electron Microscopy Service of Universitat Politècnica de València for their support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pd supported on mixed metal oxide as an efficient catalyst for the reductive amination of bio-derived acetol to 2-methylpiperazine

  • Mazarío, Jaime
  • Raad, Zaher
  • Concepción, Patricia
  • Cerdá Moreno, Cristina
  • Dómine, Marcelo Eduardo
An efficient process for synthesizing a high added-value N-heterocycle (2-methylpiperazine, 2-MP) via reductive amination of hydroxyacetone or acetol (product of the selective dehydration of glycerol) with ethylenediamine by using Pd supported catalysts under mild reaction conditions is here presented. Catalysts based on Pd nanoparticles supported on metallic oxides and mixed oxides were prepared and characterized by ICP analysis, XRD, HR-TEM, and NH3-TPD, among others. Catalytic activity comparisons of Pd-based materials (also including commercial references) were done and obtained results correlated with metal particle morphology (analyzed by CO-FTIR) and its ability to activate the C[double bond, length as m-dash]N bond. The best results were attained with Pd/TiO2–Al2O3 and Pd/ZrO2–Al2O3, the former yielding >80% of 2-MP. The Pd/TiO2–Al2O3 catalyst successfully enables the activation of the imine group (C[double bond, length as m-dash]N), due to a larger number of unsaturated Pd sites in its nanoparticles, while keeping a suitable acidity to effectively and selectively carry out the reductive cyclo-amination reaction even with lower catalyst loadings. This research work offers a new and sustainable catalytic route for the synthesis of organo-nitrogen compounds taking advantage of renewable raw materials (i.e. acetol) as a carbon source and using efficient Pd supported catalysts., The authors express their gratitude to the Spanish Government for the funding (MICINN: CTQ2015-67592, PGC2018-097277-B-I00 and Severo Ochoa Program: SEV-2016-0683). J. M. thanks the MICINN (CTQ2015-67592) for his PhD scholarship. Z. R. thanks the Islamic Center Association for Guidance and Higher Education for his PhD scholarship. The authors also thank the Electron Microscopy Service of Universitat Politècnica de València for their support and M. Parreño-Romero for her assistance with the measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structure-reactivity relations in Cu/ZrO2 catalysed glycerol dehydration to acetol in continuous flow

  • Mazarío, Jaime
  • Jampaiah, Deshetti
  • Concepción, Patricia
  • Villasante-Iturria, Pablo
  • Wilson, Karen
  • Lee, Adam
  • Dómine, Marcelo Eduardo
The selective dehydration of glycerol to hydroxyacetone (acetol) was studied in a continuous flow fixed-bed reactor with CuO supported on monoclinic (m-) or tetragonal (t-) ZrO nanoparticles. Catalysts were characterised by ICP, N physisorption, powder XRD, HR-TEM and SEM-EDS, NO titration, and NH- and CO-TPD. Quasi-in situ XPS reveals the impact of zirconia phase on copper speciation, with m-ZrO preferentially stabilising Cu(i) species, whose presence correlates with enhanced catalytic performance. In situ FTIR of 1,2-propanediol and glycerol evidenced Cu(i) promote desorption of a C 00000000 00000000 00000000 00000000 11111111 00000000 11111111 00000000 00000000 00000000 O containing intermediate. Solvent selection strongly influenced catalyst reactivity, with methanol less prone to competitive adsorption than water, and favouring the genesis of Cu(i) species. Cu/m-ZrO achieved 60% yield of the desired acetol at 240 °C, maintaining ≥50% yield over three consecutive regeneration cycles, being one of the most efficient catalysts based on earth abundant metals for continuous glycerol dehydration to acetol under the present conditions., Authors thank grants PGC2018-097277-B-I00 and PID2021-125897-OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and the Australian Research Council for funding (DP200100204, DP200100313, LP190100849). J. M. also thanks Spanish Government (CTQ-2015-67592) for his FPI fellowship. The authors also thank J. M. Salas for his help with IR measurements, and M. Parreño Romero and the Electron Microscopy Service of Universitat Politècnica de València for their support during electron microscopy analyses.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

From biomass-derived furans to aromatic compounds: design of Al-Nb-SBA-15 mesoporous structures and study of their acid properties on catalytic performance

  • Elías, Verónica R.
  • Ferrero, Gabriel O.
  • Idriceanu, Madalina G.
  • Eimer, G.A.
  • Dómine, Marcelo Eduardo
Renewable aromatics compounds (i.e. BTXs) are interesting, useful and much desired chemicals for industry due to the lack or difficulty to find available non-fossil feedstocks capable to produce these aromatics in good yields. Therefore, the aromatization reaction of biomass-derived furans is a valuable strategy for a sustainable production of aromatic compounds. In this work, modified SBA-15 mesoporous silicates with enhanced acid properties were successfully synthetized by a one-pot method, directly incorporating the metal precursor (Nb, W, Ga, Zr, Al) in the synthesis gel. The solids were characterized by different techniques, such as XRD, TEM, ICP, N physisorption, FT-IR of adsorbed pyridine and NH-TPD, among others. The catalytic performance of mesoporous materials was tested in the Diels-Alder (DA) aromatization reaction using 2,5-DMF as a diene and ethylene as a dienophile for the selective production of p-xylene (p-xy). Among the mono-metallic solids (modified with Nb, W, Ga, Zr or Al) showing Lewis (Le) acidity, only those that also present Brønsted (Br) sites showed activity in the aromatization reaction, appearing Al(x)-S as the most selective catalyst for the p-xy production. Then, Br acidity in bi-metallic solids was ensured by co-incorporating Al in the structure, showing Al-Nb-SBA-15 - materials the best catalytic performance. For these solids, the p-xy yield showed a strong dependence with the metal content and the moderate strength Br/Le acid sites ratio. Optimization of the composition of Al-Nb-SBA-15 catalyst and the reaction conditions allowed reaching a p-xy yield even higher than that observed for previous reported reference catalyst (i.e. H-ZSM-5). It was demonstrated that the type of metals (Al and Nb) incorporated in SBA-15 provides an adequate combination of Br and Le acid sites of moderate strength and homogeneously distributed on the solid (low surface density of acid sites), which together with the high accessibility offered by the mesoporous material, are features to be considered for the aromatic production. The observed activity for catalysts with both Le and Br sites was mainly attributed to their ability to retard side reactions, such as oligomerization and alkylation by means of the effective cycloaddition of 2,5-DMF with ethylene in Le sites, in addition to the dehydrative aromatization reaction allowed by the presence of Br acidity., Financial support by CSIC (Spain) through the project COOPB-20415 and the Spanish Government (MICINN, projects PGC2018-097277-B-I00 and PID2021-125897-B-I00) and by Argentinean Government through the project ANPCYT-PICT-2020-SERIEA-00918 are gratefully acknowledged. Authors also thank M. Parreño Romero and the Electron Microscopy Service of Universitat Politècnica de València for their support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rutile-Phase Sn-Ti Mixed Oxides as Acid Catalysts for the Condensation of C2-C3 Oxygenated Compounds in Water

  • Fernández-Arroyo Naranjo, Alberto
  • Dómine, Marcelo Eduardo
The design of new cost-effective and water-resistant acid catalysts is crucial for valorizing aqueous side-streams to increase the efficiency and competitiveness of bio-refineries in a sustainable way. In this work, Sn−Ti mixed oxides are prepared via a green and scalable co-precipitation method. This synthesis procedure allows obtaining homogeneous rutile-phase Sn−Ti mixed oxides with enhanced textural properties and a higher amount of Lewis acid sites. More importantly, the catalytic behavior of these Sn−Ti mixed oxides is investigated by using an aqueous mixture of C-C representative oxygenated compounds, closer to real industrial conditions and differing from usual individual probe molecules studies performed even in the absence of water. Catalytic experiments combined and correlated with spectroscopic measurements (i. e., XRD, TEM, FT-IR with pyridine adsorption-desorption and N adsorption) are performed to better understand the properties of different Sn−Ti catalysts. These materials show promising results in the condensation of light oxygenated compounds present in aqueous fractions. Homogeneous and robust rutile-phase structures with inherent hydrophobic characteristics turn these Sn−Ti materials into active and highly resistant catalysts capable to transform these low-value oxygenated compounds into a mixture of hydrocarbons and aromatics useful for blending with automotive fuels, especially under complex acidic aqueous environments and moderate process conditions., Financial support by the Spanish Government (PGC2018-097277-B−I00 and PID2021-125897OB−I00) is gratefully acknowledged. A. F−A. thanks “la Caixa-Severo Ochoa” Foundation for the PhD fellowship. Authors also thank Miriam Parreño-Romero and the Electron Microscopy Service of Universitat Politècnica de València for their support.