Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 38
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

3D Printing for Dissemination of Maya Architectural Heritage: The Acropolis of La Blanca (Guatemala)

  • Montuori, Riccardo
  • Rosado-Torres, Ana Laura
  • Gilabert Sansalvador, Laura|||0000-0001-7890-5334
[EN] This paper focuses on the use of 3D printing as a tool for the dissemination of Maya architectural heritage. The case study is the Acropolis of La Blanca, the main complex of this archaeological site located in the Peten department, Guatemala. One of the objectives of La Blanca Project was to create a model of the Acropolis as part of the strategy for dissemination and as a didactical resource for the Visitor Center. The documentation of this architectural complex with digital survey techniques allowed to obtain a high-fidelity model of the Acropolis¿ buildings. In order to achieve this goal, it was necessary to develop a methodology for the reverse modelling of the Acropolis, starting from the data obtained by laser scanning. We developed a workflow to create a virtual replica of the Acropolis optimized for 3D printing. This model was first printed in 17 parts by using the FDM technology. Then, it was transported to Guatemala and, finally, it was reassembled and placed at the Visitor Center. Today, this physical replica of the Acropolis is an important resource that allows the visitors to have a complete view of the main complex of the site, which is not easy in the Guatemalan jungle. It also provides an exclusive view of some parts of the Acropolis, already studied by researchers and now protected with a soil layer to ensure their preservation. Moreover, it is a useful resource for supporting dissemination and also serves as a teaching resource for student visitors., This work was funded by the Universitat Politècnica de València through the Research and Development Grants Program (PAID-01-17); by the Spanish Ministry of Science, Innovation and Universities through the Aid Program for predoc contracts for the training of doctors (ref. BES-2015- 071296) and by Generalitat Valenciana through the Santiago Grisolía grants Program (GRISOLIAP/2018/139). This study is also part of the research project Arquitectura Maya: Sistemas Constructivos, Estética Formal, Simbolismo y Nuevas Tecnologías (PGC2018-098904-B-C21-AR), funded by the Spanish Ministry of Science, Innovation and Universities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the Design of Soret Zone Plates based on Binary Sequences using Directional Transducers

  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Pérez-López, Sergio
[EN] In this work, we analyze the effect of the distribution of transparent Fresnel regions over the focusing profile of Soret Zone Plates (SZP) based on binary sequences. It is shown that this effect becomes very significant in those fields where directional transducers are employed, such as microwaves or acoustics. A thorough analysis of both the SZP transmission efficiency and the focusing enhancement factor is presented. Moreover, experimental measurements are also carried out for a particular type of binary sequence, the Cantor ternary set, validating the theoretical model and demonstrating that the distribution of transparent Fresnel regions becomes a critical parameter in applications requiring directional emitters., This work has been supported by Spanish MICINN RTI2018-100792-B-I00 project and Generalitat Valenciana AICO/2020/139 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In vivo toxicity assessment of eugenol and vanillin-functionalised silica particles using Caenorhabditis elegans

  • Fuentes López, Cristina|||0000-0002-0589-6550
  • Verdú-Amat, Samuel|||0000-0002-3910-4582
  • Fuentes López, Ana|||0000-0002-4144-2396
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Ruiz, María José
[EN] The toxicological properties of different silica particles functionalised with essential oil components (EOCs) were herein assessed using the in vivo model C. elegans. In particular, the effects of the acute and long-term exposure to three silica particle types (SAS, MCM-41 micro, MCM-41 nano), either bare or functionalised with eugenol or vanillin, were evaluated on different biological parameters of nematodes. Acute exposure to the different particles did not reduce nematodes survival, brood growth or locomotion, but reproduction was impaired by all the materials, except for vanillin-functionalised MCM-41 nano. Moreover, long-term exposure to particles led to strongly inhibited nematodes growth and reproduction. The eugenol-functionalised particles exhibited higher functionalisation yields and had the strongest effects during acute and long-term exposures. Overall, the vanillin-functionalised particles displayed milder acute toxic effects on reproduction than pristine materials, but severer toxicological responses for the 96-hour exposure assays. Our findings suggest that the EOC type anchored to silica surfaces and functionalisation yield are crucial for determining the toxicological effects of particles on C. elegans. The results obtained with this alternative in vivo model can help to anticipate potential toxic responses to these new materials for human health and the environment., The authors are grateful to the Spanish Government (Project RTI2018-101599-B-C21 (MCUI/AEI/FEDER, EU)) and the Generalitat Valenciana (grant agreement no. ACIF/2016/139) for financial support. The authors appreciate the supporting help in providing nematodes from the Caenorhabditis elegans Center (CGC), which is funded by the NIH Office of Research Infrastructure Programs (P40 OD010440). Funding for open access charge: Universitat Politécnica de Valéncia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Toxicological assessment of silica particles functionalised with essential oil components and their constituents

  • Fuentes López, Cristina|||0000-0002-0589-6550
[ES] La funcionalización de partículas de sílice con componentes de aceites esenciales (EOCs) se ha propuesto como una estrategia prometedora para mejorar la actividad antimicrobiana y la estabilidad de estos compuestos. Sin embargo, debido a la potencial aplicación de estas partículas en la industria alimentaria, es necesario llevar a cabo estudios toxicológicos que permitan identificar los posibles efectos sobre la salud que puede conllevar el uso de estos nuevos materiales. En esta tesis doctoral, se ha evaluado el riesgo derivado de la exposición oral a tres tipos de partículas de sílice (SAS, micropartículas MCM-41 y nanopartículas MCM-41) funcionalizadas con cuatro tipos de EOCs diferentes (carvacrol, eugenol, timol y vainillina) y se ha comparado con el efecto de los EOCs libres y las partículas sin funcionalizar. La evaluación toxicológica de estos nuevos materiales se llevó a cabo a través de una estrategia formada por 3 tipos de estudios diferentes como son la simulación de condiciones fisiológicas, el uso de la línea celular HepG2 y el organismo modelo Caenorhabditis elegans. El primer paso en la evaluación toxicológica de las partículas consistió en estudiar su estabilidad en fluidos fisiológicos que simulan las condiciones de exposición por vía oral. Los resultados mostraron que la funcionalización con EOCs aumenta la biodurabilidad de las partículas en condiciones que representan el tracto gastrointestinal humano y el fluido lisosomal, como se observa tanto por la menor disolución de los diferentes tipos de partículas funcionalizadas como por la conservación de la estructura de las nanopartículas MCM-41. Sin embargo, el estado de aglomeración de las partículas no cambió en condiciones fisiológicas, y todas ellas se mantuvieron dentro del rango de tamaño de las micropartículas. Por tanto, dado su gran tamaño, estos materiales presentan un bajo riesgo de acumulación tras ingestión oral. El estudio in vitro de la toxicidad de los materiales demostró que las partículas funcionalizadas con EOCs presentan un efecto citotóxico mayor que los EOCs libres y la sílice sin funcionalizar. Además, independientemente del tipo de EOC, las micropartículas MCM-41 funcionalizadas fueron los materiales más citotóxicos. Los resultados sugieren que las partículas funcionalizadas con EOCs inducen toxicidad en las células HepG2 mediante un mecanismo relacionado con el estrés oxidativo, el cual provoca daño mitocondrial y la consecuente activación de procesos de apoptosis. Por otra parte, se demostró que este efecto citotóxico está causado por interacciones directas entre las células y las partículas, y no por productos de degradación liberados al medio de cultivo. La exposición aguda a concentraciones moderadas y altas de EOCs redujo la viabilidad de las células HepG2 y la supervivencia de C. elegans. La jerarquía de la toxicidad se mantuvo entre células y nemátodos, siendo el carvacrol el compuesto más tóxico, seguido del timol, el eugenol y, por último, la vainillina. Además, concentraciones subletales de estos componentes indujeron toxicidad reproductiva en C. elegans, lo que sugiere que pueden presentar efectos tóxicos a las concentraciones requeridas por sus propiedades bioactivas. El estudio in vivo de la toxicidad de las partículas mostró que tanto las partículas sin funcionalizar como las funcionalizadas con eugenol causan toxicidad reproductiva en C. elegans tras la exposición aguda, e inhibición en el crecimiento y la reproducción de los nematodos tras la exposición a largo plazo. Las partículas funcionalizadas con vainillina mostraron efectos tóxicos agudos leves, pero un mayor efecto tras la exposición a largo plazo. En líneas generales, los resultados obtenidos muestran que las partículas funcionalizadas con eugenol utilizadas en el estudio presentan mayores efectos sobre C. elegans que la sílice sin funcionalizar y las partículas funcionalizadas con vainillina., [CA] La funcionalització de partícules de sílice amb components d'olis essencials (EOCs) s'ha proposat com una estratègia prometedora per a millorar l'activitat antimicrobiana i l'estabilitat d'aquests compostos. No obstant això, a causa de la potencial aplicació d'aquestes partícules en la indústria alimentària, és necessari dur a terme estudis toxicològics que permeten identificar els possibles efectes sobre la salut que pot comportar l'ús d'aquests nous materials. En aquesta tesi doctoral, s'ha avaluat el risc derivat de l'exposició oral a tres tipus de partícules de sílice (SAS, micropartícules MCM-41 i nanopartícules MCM-41) funcionalitzades amb quatre tipus de EOCs diferents (carvacrol, eugenol,timol i vanil·lina) i s'ha comparat amb l'efecte dels EOCs lliures i les partícules sense funcionalitzar. L'avaluació toxicològica d'aquests nous materials es va dur a terme a través d'una estratègia formada per 3 tipus d'estudis diferents com són la simulació de condicions fisiològiques, l'ús de la línia cel·lular HepG2 i l'organisme model Caenorhabditis elegans. El primer pas en l'avaluació toxicològica de les partícules va consistir a estudiar la seua estabilitat en fluids fisiològics que simulen les condicions d'exposició per via oral. Els resultats van mostrar que la funcionalització amb EOCs augmenta la biodurabilidad de les partícules en condicions que representen el tracte gastrointestinal humà i el fluid lisosomal, com s'observa tant per la menor dissolució dels diferents tipus de partícules funcionalitzades com per la conservació de l'estructura de les nanopartícules MCM-41. No obstant això, l'estat d'aglomeració de les partícules no va canviar en condicions fisiològiques, i totes elles es van mantindre dins del rang de grandària de les micropartícules. Per tant, donat la seua gran grandària, aquests materials presenten un baix risc d'acumulació rere ingestió oral. L'estudi in vitro de la toxicitat dels materials va demostrar que les partícules funcionalitzades amb EOCs presenten un efecte citotòxic major que els EOCs lliures i la sílice sense funcionalitzar. A més, independentment del tipus d'EOC, les micropartícules MCM-41 funcionalitzades van ser els materials més citotòxics. Els resultats suggereixen que les partícules funcionalitzades amb EOCs indueixen toxicitat en les cèl·lules HepG2 mitjançant un mecanisme relacionat amb l'estrés oxidatiu, el qual provoca dany mitocondrial i la conseqüent activació de processos d'apoptosis. D'altra banda, es va demostrar que aquest efecte citotòxic és causat per interaccions directes entre les cèl·lules i les partícules, i no per productes de degradació alliberats al mitjà de cultiu. L'exposició aguda a concentracions moderades i altes de EOCs va reduir la viabilitat de les cèl·lules HepG2 i la supervivència de C. elegans. La jerarquia de la toxicitat es va mantindre entre cèl·lules i nemàtodes, sent el carvacrol el compost més tòxic, seguit del timol, el eugenol i, finalment, la vanil·lina. A més, concentracions subletals d'aquests components van induir toxicitat reproductiva en C. elegans, la qual cosa suggereix que poden presentar efectes tòxics a les concentracions requerides per les seues propietats bioactives. L'estudi in vivo de la toxicitat de les partícules va mostrar que tant les partícules sense funcionalitzar com les funcionalitzades amb eugenol causen toxicitat reproductiva en C. elegans després de l'exposició aguda, i inhibició en el creixement i la reproducció dels nematodes després de l'exposició a llarg termini. Les partícules funcionalitzades amb vanil·lina van mostrar efectes tòxics aguts lleus, però un major efecte després de l'exposició a llarg termini. En línies generals, els resultats obtinguts mostren que les partícules funcionalitzades amb eugenol utilitzades en l'estudi presenten majors efectes sobre C. elegans que la sílice sense funcionalitzar i les partícules funcionalitzades amb vanil·lina., [EN] Functionalisation of silica particles with essential oils components (EOCs) has emerged as a useful tool for enhancing EOCs' antimicrobial activity and stability. Given these new materials' promising applications for the food industry, toxicological studies must be performed to identify possible hazards for human health. In the present doctoral thesis, the potential risk deriving from oral exposure to three types of silica particles (SAS, MCM-41 microparticles, MCM-41 nanoparticles) functionalised with four different EOCs (carvacrol, eugenol, thymol, vanillin) was investigated and compared to free EOCs and pristine particles. For this purpose, three different replacement methods were used as a strategy to carry out the toxicological assessment of these new materials: simulated physiological conditions, HepG2 culture cells and the non-mammalian organism model Caenorhabditis elegans. As the expected human exposure to these materials was the oral route, the first step in the toxicological assessment of the silica particles was to study their degradation behaviour in acellular physiological fluids that mimic oral exposure conditions. The results showed that functionalisation of silica with EOCs increases particles' biodurability under conditions representing the human gastrointestinal tract and lysosomal fluid, as observed by both, the lower dissolution rates in the different functionalised particle types and the preservation of the EOCs-functionalised MCM-41 nanoparticles structure. However, the agglomeration state of the particles did not change under the physiological conditions, which remained within the micro-sized range in all cases. Therefore, given their large size, these materials present a low risk of accumulation after oral ingestion. The in vitro toxicity study showed that EOCs-functionalised particles displayed stronger cytotoxic effect than the free EOCs and pristine silica. Independently of EOC type, the EOCs-functionalised MCM-41 microparticles were the most cytotoxic materials from the different silica particle types analysed. Our results suggest that the EOCs-functionalised particles induce toxicity on HepG2 cells by an oxidative stress-related mechanism that causes mitochondrial dysfunction and apoptosis activation via the mitochondrial pathway. This cytotoxic effect was caused by direct cell-particle interactions, and not by degradation products released to culture media. Acute exposure to moderate and high concentrations of EOCs reduced HepG2 viability and nematode survival. The toxicity ranking was maintained between culture cells and nematodes, being carvacrol the most toxic compound followed by thymol, eugenol, and lastly by vanillin. Moreover, sublethal concentrations to these components induced reproductive toxicity in C. elegans, which suggests that they may present toxic effects at the concentrations required for their bioactive properties. The in vivo toxicity study of the particles showed that both the bare and EOCs-functionalised particles cause acute reproductive toxicity and inhibition in nematode growth and reproduction after long-term exposure. The vanillin-functionalised particles displayed milder acute toxic effects, but severer long-term exposure toxicological responses. However, the eugenol-functionalised particles exhibited stronger effects than the bare and vanillin-functionalised silica., The authors gratefully acknowledge the financial support from the Spanish government (Project RTI2018-101599-B-C21 (MCUI/AEI/FEDER, EU)). Cristina Fuentes also thanks the Generalitat Valenciana for being funded by the predoctoral programme Vali+d (ACIF/2016/139). María Ruiz-Rico acknowledges the Generalitat Valenciana for her Postdoctoral Fellowship (APOSTD/2019/118).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design of Acoustic Bifocal Lenses Using a Fourier-Based Algorithm

  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Pérez-López, Sergio
[EN] In this work, we develop a new design method based on fast Fourier transform (FFT) for implementing zone plates (ZPs) with bifocal focusing profiles. We show that the FFT of the governing binary sequence provides a discrete sequence of the same length, which indicates the location of the main foci at the ZP focusing profile. Then, using reverse engineering and establishing a target focusing profile, we are capable of generating a binary sequence that provides a ZP with the desired focusing profile. We show that this design method, based on the inverse fast Fourier transform (IFFT), is very flexible and powerful and allows to tailor the design of bifocal ZPs to achieve focusing profiles with the desired foci locations and resolutions. The key advantage of our design algorithm, compared to other alternatives presented in previous works, is that our method provides bifocal focusing profiles with an absolute control of the foci locations. Moreover, although we analyze the performance of this novel design algorithm for underwater ultrasonics, it can also be successfully extended to different fields of physics, such as optics or microwaves, where ZPs are widely employed., This work has been supported by the Spanish MICINN RTI2018-100792-B-I00 project and Generalitat Valenciana AICO/2020/139 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Transient Analysis of Fresnel Zone Plates for Ultrasound Focusing Applications

  • Pérez-López, Sergio
  • Dolmatov, Dimitry O.
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
[EN] Fresnel Zone Plates are planar lenses that can be used to focus ultrasound beams. This kind of acoustic lenses can play a key role in the resolution of ultrasonic NDT systems. In this type of pulse-echo applications, the pulse duration is an important parameter that specifies the axial resolution, and thus, shorter ultrasound pulses provide higher resolutions. However, acoustic lenses exhibit a transient response that should be considered when setting the pulse duration, as pulses shorter than the transient state duration result in degradation in the response of acoustic lenses in terms of focal intensity, focal displacement, and lateral and axial resolutions. In this work, a thorough analysis of the transient response of Fresnel Zone Plates is discussed, demonstrating that the transient state should be considered in order to achieve optimal focusing performance. Theoretical and numerical results are presented, showing very good agreement., This work has been supported by Spanish MICINN RTI2018-100792-B-I00 project, Generalitat Valenciana AICO/2020/139 and the Russian Governmental program "Science" project FSWW-2020-0014. The research is carried out within the framework of Tomsk Polytechnic University Competitiveness Enhancement Program grant VIU-MNOL NK 187/2020. S.P.-L. acknowledges financial support from Universitat Politècnica de València grant program PAID-01-18. D.T.-S. acknowledges financial support from MICINN BES-2016-07713 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of Predistortion Techniques on Fresnel Zone Plates in Ultrasound Applications

  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Belmar Ibáñez, Francisco|||0000-0003-4412-0007
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Pérez-López, Sergio
[EN] In this work, we analyze the effect of predistortion techniques on the focusing profile of Fresnel Zone Plates (FZPs) in ultrasound applications. This novel predistortion method is based on either increasing or decreasing the width of some of the FZP Fresnel rings by a certain amount. We investigate how the magnitude of the predistortion, as well as the number and location of the predistorted rings, influences the lens focusing profile. This focusing profile can be affected in different ways depending on the area of the lens where the predistortion is applied. It is shown that when the inner area of the lens, closer to its center, is predistorted, this technique allows the control of the focal depth at the main focus. However, when the predistortion is applied to an area farther from the center of the lens, the acoustic intensity distribution among the main focus and the closest adjacent secondary foci can be tailored at a certain degree. This predistortion technique shows great potential and can be used to control, modify and shape the FZP focusing profile in both industrial and therapeutic applications., This work has been supported by Spanish MICINN RTI2018-100792-B-I00 project and Generalitat Valenciana AICO/2020/139 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Constructive Analysis of Maya Vaulted Architecture from Photogrammetric Survey

  • Gilabert Sansalvador, Laura|||0000-0001-7890-5334
  • Montuori, Riccardo
  • Rosado-Torres, Ana Laura
[EN] Studying Maya architecture from a constructive perspective reveals new insights into the ancient building techniques and processes. Gaining deep knowledge of these structures is key to assessing the current conservation state of the buildings and to designing strategies for the excavation and preservation of this heritage. In order to study the Maya vault system, considering its regional variants and technical development over time, we performed field data collections at 48 Maya Lowlands archaeological sites with the aim of documenting and comparing constructive techniques from different areas and chronological periods. Surveying some of these buildings with digital photogrammetry made it possible to obtain geometrically accurate models with a high-quality texture that were used to measure, analyze and compare the features of the vaults in detail. The main advantage of this survey methodology is that it permits to achieve a high amount of information with affordable instruments. From the models obtained, a thorough analysis of stonemasonry techniques, stereotomy solutions and building processes was carried out, considering their implications for the stability and conservation of the structures. This paper presents the survey methodology used and an example of the constructive analysis of a vaulted building from a photogrammetric model., This work was funded by the Spanish Ministry of Science, Innovation and Universities through the Aid Program for pre-doc contracts for training of doctors (ref. BES-2015-071296); by the Universitat Politècnica de València through the Research and Development Grants Program (PAID-01-17) and by Generalitat Valenciana through the Santiago Grisolía grants Program (GRISOLIAP/2018/139). The study is part of the research project Arquitectura Maya: Sistemas Constructivos, Estética Formal, Simbolismo y Nuevas Tecnologías (PGC2018-098904-B-C21- AR), funded by the Spanish Ministry of Science, Innovation and Universities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Debye length and anionic transport properties on composite membranes based on supported Ionic Liquid-Like Phases (SILLPS)

  • Hernández, Saúl I.
  • Altava, Belén
  • Portillo-Rodríguez, J. A.
  • Santamaría-Holek, Iván
  • García-Alcántara, C.
  • Luis, Santiago V.
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] An analysis of the ionic transport properties of BMIM [NTf2] in supported ionic-liquid-like phase (SILLP)-based membranes has been carried out based on experimental impedance spectroscopy measurements. The direct current (dc)-conductivity was analyzed to determine the temperature and frequency dependence. The fit of the loss tangent curve data with the Cole-Cole approximation of the electrode polarization model provides the conductivity, diffusivity, and density of charge carriers. Among these quantities, a significant increase in conductivity is observed when an ionic liquid is added to the polymeric matrix containing imidazolium fragments. The use of a recent generalization of Eyring's absolute rate theory allowed the elucidation of how the local entropy restrictions, due to the porosity of the polymeric matrix, control the conductive process. The fit of the conductivity data as a function of temperature manifests the behavior of the excess entropy with respect to the temperature. The activation entropy and enthalpy were also determined. Our results correlate the Debye length (L-D) with the experimental values of conductivity, electrode polarization relaxation time, and sample relaxation time involved. Our work provides novel insights into the description of ionic transport in membranes as the diffusivity, mobility, and free charge density depend on the L-D. Moreover, we discuss the behavior of the polarization relaxation time, the sample relaxation time, and the static permittivity as a function of the temperature., V. Compan is grateful to Ministerio de Economia y Competitividad (MINECO), project reference: ENE/2015-69203-R. ISH acknowledges financial support by UNAM-DGAPA under grant IN117419. SIH and CGA are grateful to projects UNAM-DGAPA-PAPIIT IN114721, LANCAD-UNAM-DGTIC-276 and LANCAD-UNAM-DGTIC-385. ISH and JAPR are grateful to project UNAM-DGAPA-PAPIIT IN117419. BA and SVL are grateful to MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe, grant numbers PDI2021-124695OB-C22 and RTI2018-098233-B-C22; Pla de Promocio de la Investigacio de la Universitat Jaume I, grant number UJI-B2021-31 and Conselleria de Innovacio, Universitat i Ciencia, grant number AICO/2021/139.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative cytotoxic study of silica materials functionalised with essential oil components in HepG2 cells

  • Fuentes López, Cristina|||0000-0002-0589-6550
  • Fuentes López, Ana|||0000-0002-4144-2396
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Ruiz Rico, María
  • Ruiz, María José
[EN] This work evaluated the cytotoxic effect of different EOCs-functionalised silica particle types. The in vitro toxicity of eugenol and vanillin-immobilised SAS, MCM-41 microparticles and MCM-41 nanoparticles was evaluated on HepG2 cells, and compared to free EOCs and pristine materials. The results revealed that free essential oil components and bare silica had a mild cytotoxic effect on HepG2 cells. However, the comparative study showed that free eugenol and vanillin had a milder cytotoxic effect than the equivalent concentrations of immobilised components on the different silica particles, while differences in cell viability between the bare and functionalised particles relied on the type of analysed material. The most cytotoxic materials were eugenol and vanillin-functionalised MCM-41 micro with IC50 values of 0.19 and 0.17 mg/mL, respectively, at 48 h exposure. Differences in cytotoxicity between functionalised particles may be attributed to the density of the functional components on their surface as a result of the functionalisation reaction performance for different materials. The study of the physico-chemical properties of particles demonstrated that cationic nature and increased hydrophobicity could be responsible for promoting cell-particle interactions for the eugenol and vanillin functionalised silica particles, enhancing their cytotoxic behaviour., The authors gratefully acknowledge the financial support from the Spanish government (Project RTI2018-101599-B-C21 (MCUI/AEI/FEDER, EU)). C.F. thanks the Generalitat Valenciana for being funded by the predoctoral programme Vali+d (ACIF/2016/139). M.R.R. also acknowledges the Generalitat Valenciana for her postdoctoral fellowship (APOSTD/2019/118).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Design of Acoustic Lenses for Ultrasound Focusing Applications

  • Pérez López, Sergio
[ES] La focalización de ultrasonidos tiene muchas aplicaciones en una gran variedad de áreas tanto científicas como industriales. Los ultrasonidos focalizados son una de las herramientas principales usada por médicos en todo el mundo para obtener imágenes biomédicas de diferentes tipos de tejidos y órganos de manera no invasiva. En las últimas décadas, el uso de ultrasonidos focalizados de alta intensidad (HIFU, por sus siglas en inglés) ha surgido como una de las técnicas principales para el tratamiento de cáncer mediante la ablación térmica de tumores de manera no invasiva. Además, los ultrasonidos focalizados están emergiendo en los últimos años como uno de los métodos más prometedores para el tratamiento de las enfermedades cerebrales, con la aparición de nuevas técnicas disruptivas como la apertura reversible de la barrera hematoencefálica o la neuromodulación. En entornos industriales, los ultrasonidos son ampliamente utilizados como uno de los métodos principales para la evaluación no destructiva de materiales y estructuras, debido a que las ondas acústicas pueden penetrar en los objetos a distancias donde la luz no puede debido a la elevada absorción y dispersión. En este sentido, diseñar estructuras capaces de focalizar ultrasonidos es de una gran relevancia tanto para la comunidad científica como para los sectores médicos e industriales. Esta tesis presenta nuevos diseños de lentes acústicas capaces de controlar los parámetros principales del haz de ultrasonidos focalizados, proporcionando diferentes tipos de perfiles de focalización adecuados para una gran variedad de aplicaciones y escenarios. En particular, se han diseñado y adaptado al campo de los ultrasonidos las lentes de Fresnel (Fresnel Zone Plates, FZPs), ampliamente utilizadas en el campo de la óptica. Se ha presentado una nueva técnica de modulación espacio-temporal capaz de controlar la posición del foco de ultrasonidos tanto en espacio como en tiempo, aumentando así la versatilidad de este tipo de dispositivos. También se ha demostrado el funcionamiento en el campo de la acústica de nuevos diseños basados en aplicar secuencias binarias a una lente de Fresnel convencional, como las secuencias fractales de Cantor o las secuencias de M-bonacci generalizadas, capaces de modificar las propiedades de focalización de las lentes, incluyendo el número, posición y forma de los focos acústicos. Además, se introduce un nuevo diseño de lentes esféricas rellenas de líquido capaces de generar jets ultrasónicos, con mucho potencial en aplicaciones de imagen de alta resolución en campo cercano. Se ha demostrado que, cambiando el líquido interno de la lente o ajustando el ratio de mezcla entre dos líquidos, se pueden controlar los parámetros principales del jet. Los diseños propuestos en la tesis han sido validados tanto empleando simulaciones numéricas como realizando medidas experimentales, allanando el camino para el uso de este tipo de estructuras en aplicaciones de focalización de ultrasonidos., [CA] La focalització d'ultrasons té moltes aplicacions en moltes àrees científiques i industrials. Els ultrasons focalitzats són una de les eines principals utilitzada per metges a tot el món per obtenir imatges biomèdiques de diferents tipus de teixits i òrgans de manera no invasiva. En les últimes dècades, els ultrasons focalitzats d'alta intensitat (HIFU, per les seues sigles en anglès) han aparegut com una de les tècniques principals per al tractament de càncer mitjançant l'ablació de tumors de manera no invasiva. A més, els ultrasons focalitzats estan emergint en els últims anys com un dels mètodes més prometedors per al tractament de les malalties cerebrals, amb l'aparició de noves tècniques disruptives com l'obertura reversible de la barrera hematoencefàlica o la neuromodulació. En entorns industrials, els ultrasons són àmpliament utilitzats com un dels mètodes principals per a l'avaluació no destructiva de materials i estructures, pel fet que les ones acústiques poden penetrar en els objectes a distàncies on la llum no pot a causa de l'elevada absorció i dispersió. En aquest sentit, dissenyar estructures capaces de focalitzar ultrasons és d'una gran rellevància tant per a la comunitat científica com per als sectors mèdics i industrials. Aquesta tesi presenta nous dissenys de lents acústiques capaços de controlar els paràmetres principals del feix d'ultrasons focalitzats, proporcionant diferents tipus de perfils de focalització adequats per a una gran varietat d'aplicacions i escenaris. En particular, s'han dissenyat i adaptat al camp dels ultrasons les lents de Fresnel (Fresnel Zone Plates, FZPs), àmpliament utilitzades en el camp de l'òptica. S'ha presentat una nova tècnica de modulació espai-temporal capaç de controlar la posició del focus d'ultrasons tant en espai com en temps, augmentant així la versatilitat d'aquest tipus de dispositius. També s'ha demostrat el funcionament en el camp de l'acústica de nous dissenys basats en aplicar seqüències binàries a una lent de Fresnel convencional, com les seqüències fractals de Cantor o les seqüències de M-bonacci generalitzades, capaces de modificar les propietats de focalització de les lents, incloent el nombre, posició i forma dels focus acústics. A més, s'introdueix un nou disseny de lents esfèriques plenes de líquid capaces de generar jets ultrasònics, amb molt potencial en aplicacions d'imatge d'alta resolució en camp proper. S'ha demostrat que, canviant el líquid intern de la lent o ajustant la ràtio de barreja entre dos líquids, es poden controlar els paràmetres principals del jet. Els dissenys proposats en la tesi han estat validats tant emprant simulacions numèriques com realitzant mesures experimentals, aplanant el camí per a l'ús d'aquest tipus d'estructures en aplicacions de focalització d'ultrasons., [EN] Ultrasound focusing has many applications in a wide range of fields. Focused ultrasound is one of the main tools used by doctors all over the world to obtain biomedical images of different kind of tissues non-invasively. In the past decades, high intensity focused ultrasound (HIFU) appeared as one of the fundamental techniques for cancer treatment through non-invasive thermal tumor ablation. In addition, focused ultrasonic waves are recently emerging as one of the main tools to treat brain diseases, with novel disruptive techniques such as blood-brain barrier opening or neuromodulation. In industrial environments, ultrasonic waves are widely employed as one of the primary methods for the non-destructive evaluation (NDE) of materials and structures, as acoustic waves are able to penetrate deep into objects otherwise opaque using optical techniques. In this sense, designing structures capable of focusing ultrasonic waves is of great interest and relevance for the scientific, the industrial, and the biomedical sectors. This thesis devises new designs of acoustic lenses capable of controlling the main parameters of the focused ultrasound beam, achieving different kinds of focusing profiles suitable for a wide variety of scenarios. In particular, Fresnel Zone Plates (FZPs), commonly used in optics, are designed and adapted to the ultrasound domain. A novel spatio-temporal modulation technique capable of controlling the ultrasound focus location in both time and space is presented, increasing the versatility of this kind of devices. New design techniques based on applying a binary sequence to FZPs are also demonstrated, such as Cantor fractal sequences or generalized M-bonacci sequences, which modify the focusing properties of the lens, including the number, location, and shape of the different acoustic foci. In addition, acoustic jets generated by liquid-filled spherical lenses are devised for near-field high resolution imaging, demonstrating their applicability in the ultrasound domain. It is demonstrated that, by changing the inner liquid of the spherical lens or by tuning the mixing ratio between two liquids, the main focal parameters of the ultrasonic jet can be accurately controlled. The proposed designs are validated using both numerical simulations and experimental measurements, paving the way for the use of these kind of structures in focused ultrasound applications., This work would not have been possible without the following funding sources: PAID-01-18 personal FPI grant from Universitat Politècnica de València; Spanish government MINECO TEC2015-70939-R project; Spanish government MICINN RTI2018-100792-B-I00 project; Generalitat Valenciana AICO/2020/139 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Transformaciones en la arquitectura de los grupos E: los casos de Tikal y Uaxactún, Transformations in the Architecture of E-Groups: The Cases of Tikal and Uaxactun

  • Montuori, Riccardo
  • Rosado-Torres, Ana Laura
[ES] Los grupos E son una tipología muy singular en la arquitectura maya. Estos conjuntos están formados por una plaza central delimitada a un costado por un edificio piramidal, y al otro por una plataforma alargada que generalmente soporta tres estructuras. Esta denominación se originó en Uaxactún, por la nomenclatura otorgada al primer conjunto identificado con tales características. En 1924, Frans Blom observó que, mirando desde la pirámide, era posible ver la alineación del sol sobre las tres estructuras al este durante los solsticios y los equinoccios, y sugirió que podría tratarse de un complejo de observación del ciclo solar. Después, se han realizado diversos estudios arqueológicos y arqueo-astronómicos que han llevado a la formulación de hipótesis diferentes, incluso a veces conflictivas, sobre la posible función de estos conjuntos. Los edificios que forman parte de los grupos E fueron sometidos en el tiempo a varias transformaciones, una práctica muy común en la arquitectura maya que, en muchos casos, comprendía la clausura y el rellenado de las estructuras preexistentes para ser después incorporadas en el volumen del nuevo edificio. Las remodelaciones que los constructores mayas aportaron en el tiempo alteraron tanto las dimensiones como las relaciones espaciales entre los edificios de estos conjuntos, generando una compleja superposición de fases constructivas. En este trabajo analizamos y comparamos desde un punto de vista arquitectónico los edificios de los grupos E de Mundo Perdido en Tikal, y de Uaxactún, centrándonos en su evolución constructiva., [EN] E-Groups are a unique typology in Maya architecture. These complexes consist of a central plaza delimited by a pyramidal building on the one side and by an elongated platform supporting three structures on the other side. Originated in Uaxactun, this denomination came from the nomenclature given to the first group ever identified with such characteristics. The interpretation of E-Groups began in 1924, with Frans Blom¿s studies of what seemed to be a solar cycle observation complex. He observed that, looking from the pyramid, it was possible to see the alignment of the sun over the three structures to the east during the solstices and equinoxes. Several archaeological and archaeoastronomical studies have been carried out ever since, which have led to the formulation of different, sometimes even controversial hypotheses about their possible function. E-Groups¿ buildings suffered various transformations over time, a very common practice in Maya architecture, which in many cases involved the filling and closure of pre-existing structures, later incorporated in the new building. The modifications that Maya builders brought about over time altered both the dimensions and the spatial relations between the buildings in these complexes, thus creating a complex superposition of constructive phases. In this paper, we analyze and compare, from an architectural point of view, the buildings of E-Groups in Mundo Perdido in Tikal and in Uaxactún, focusing on their constructive evolution., Los autores agradecen expresamente el apoyo del Ministerio de Ciencia, Innovación y Universidades de España a través de la financiación del proyecto de investigación "Arquitectura maya. Sistemas constructivos, estética formal, simbolismo y nuevas tecnologías" (PGC2018-098904-B-C21-AR), así como de la Universitat Politècnica de València a través del Programa de Ayudas de Investigación y Desarrollo para la Formación de Personal Investigador (PAID-01-17) y de la Generalitat Valenciana a través del Programa de ayudas Santiago Grisolía (GRISOLIAP/2018/139), que han contribuido de forma determinante a hacer posibles las investigaciones y la obtención de los resultados que se exponen en esta publicación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Relevant essential oil components: a minireview on increasing applications and potential toxicity

  • Fuentes López, Cristina|||0000-0002-0589-6550
  • Fuentes López, Ana|||0000-0002-4144-2396
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Ruiz, María José
[EN] Phenolic compounds carvacrol, thymol, eugenol, and vanillin are four of the most thoroughly investigated essential oil components given their relevant biological properties. These compounds are generally considered safe for consumption and have been used in a wide range of food and non-food applications. Significant biological properties, including antimicrobial, antioxidant, analgesic, anti-inflammatory, anti-mutagenic, or anti-carcinogenic activity, have been described for these components. They are versatile molecules with wide-ranging potential applications whose use may substantially increase in forthcoming years. However, some in vitro and in vivo studies, and several case reports, have indicated that carvacrol, thymol, and eugenol may have potential toxicological effects. Oxidative stress has been described as the main mechanism underlying their cytotoxic behavior, and mutagenic and genotoxic effects have been occasionally observed. In vivo studies show adverse effects after acute and prolonged carvacrol and thymol exposure in mice, rats, and rabbits, and eugenol has caused pulmonary and renal damage in exposed frogs. In humans, exposure to these three compounds may cause different adverse reactions, including skin irritation, inflammation, ulcer formation, dermatitis, or slow healing. Toxicological vanillin effects have been less reported, although reduced cell viability after exposure to high concentrations has been described. In this context, the possible risks deriving from increased exposure to these components for human health and the environment should be thoroughly revised., The present work was financially supported by the Spanish Government (Project RTI2018-101599-B-C21 (MCUI/AEI/FEDER, EU)), and by a predoctoral program Valithornd (ACIF/2016/139) through the Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tuning Ca-Al-based catalysts&apos, composition to isomerize or epimerize glucose and other sugars

  • Ventura, Maria
  • Cecilia, Juan A. A.
  • Rodriguez-Castellon, Enrique
  • Domine, Marcelo Eduardo
[EN] One of the key reactions to achieve good productivity in the transformations of cellulose derived from biomass feedstocks is the isomerization of glucose to fructose, the latest being the platform molecule for obtaining other important derivatives. In this work, Ca-Al containing catalysts based on hydrotalcite-type derived materials were used to perform the selective isomerization of glucose to fructose, and the selective epimerization of glucose to mannose, using water as the solvent under mild reaction conditions. The catalysts showed high activity (conversion = 51-87%), and excellent selectivity (63-88%) towards fructose, compared with the current industrial process based on the glucose transformation via biocatalysis. It was also possible to modulate the selectivity towards fructose or mannose by tuning the amount of basic sites of the catalysts and their composition. The combination of basic and acid sites present in the Ca-Al-based catalysts plays a key role in the reaction, a fact that is discussed in the text together with other important operational parameters. The stability and recyclability of the catalysts were tested, detecting only a small activity loss after 5 consecutive runs. The synthesis of the catalysts and their characterization are also discussed since they are one of the few cases found in the literature of this kind of hydrotalcite-type material with such a high level of Ca incorporation. Some green metrics, such as E-factor, have been calculated to evaluate our system as an environmentally friendly process., Financial support by the Spanish Government (PGC2018-097277-B-I00 and SEV-2016-0683), Generalitat Valenciana (GVA, PROMETEO/2018/006), and especially the Unesco/IUPAC/PhosAgro partnership within the program "Green Chemistry for Life" (Grant 139) is gratefully acknowledged. The authors also thank the ITQ for the technical support, and the Electron Microscopy Service of Universitat Politecnica de Valencia for instrumental facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application of Phase-Reversal Fresnel Zone Plates for High-Resolution Robotic Ultrasonic Non-Destructive Evaluation

  • Dolmatov, Dmitry O.
  • Filippov, German A.
  • Sednev, Dmitry A.
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Uris Martínez, Antonio|||0000-0002-2005-2305
[EN] Nowadays the development of automated inspection systems based on six degrees of freedom robotic manipulators is a highly relevant topic in ultrasonic non-destructive testing. One of the issues associated with such development is the problem of acquiring high-resolution results. In this article, the application Phase-Reversal Fresnel Zone Plates is considered for solving this problem. Such acoustic lenses can solve the task of high-resolution results acquisition by using a single unfocused transducer. Furthermore, Phase-Reversal Fresnel Zone Plates can provide the desired focusing depth with the fixed thickness of the coupling layer. It is important in the case of application of devices which provide localized coupling. In this paper a proper design of Phase-Reversal Fresnel Zone Plate was determined according to the conditions of planned experiments. Its efficiency was verified via the Finite Element Method modeling. In all performed experiments the relative error of flaws size estimation did not exceed 6% whereas the signal-to-noise ratio was not lower than 17.1 dB. Thus, experimental results demonstrate that the application of Phase-Reversal Fresnel Zone Plates allowed to obtain results with high lateral resolution and signal-to-noise ratio. These results demonstrate the reasonability of the development of devices that provide localized coupling and use Phase-Reversal Fresnel Zone Plates., This work has been supported by Spanish Ministry of Science, Innovation and Universities (grant No. RTI2018-100792-B-I00) and Generalitat Valenciana AICO/2020/139 project. The study has been performed under the financial support by the Russian Ministry of Science and Higher Education within the State Task Research (basic fundamental) project # FSWW-2020-0014.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Degradation of silica particles functionalised with essential oil components under simulated physiological conditions

  • Fuentes López, Cristina|||0000-0002-0589-6550
  • Fuentes López, Ana|||0000-0002-4144-2396
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Ruiz Rico, María
  • Ruiz, María José
[EN] In this work, the biodurability of three silica particle types (synthetic amourphous silica, MCM-41 microparticles, MCM-41 nanoparticles) functionalised with three different essential oil components (carvacrol, eugenol, vanillin) was studied under conditions that represented the human gastrointestinal tract and lysosomal fluid. The effect of particle type, surface immobilised component and mass quantity on the physico-chemical properties of particles and silicon dissolution was determined. Exposure to biological fluids did not bring about changes in the zeta potential values or particle size distribution of the bare or functionalised materials, but the in vitro digestion process partially degraded the structure of the MCM-41 nanoparticles. Functionalisation preserved the structure of the MCM-41 nanoparticles after simulating an in vitro digestion process, and significantly decreased the amount of silicon dissolved after exposing different particles to both physiological conditions, independently of the essential oil component anchored to their surface. The MCM-41 microparticles showed the highest solubility, while synthetic amorphous silica presented the lowest levels of dissolved silicon. The study of these modified silica particles under physiological conditions could help to predict the toxicological behaviour of these new materials., The authors gratefully acknowledge the financial support from the Spanish government (Project RTI2018-101599-B-C21 (MCUI/AEI/FEDER, EU)). Cristina Fuentes also thanks the Generalitat Valenciana for being funded by the predoctoral programme VALi+d (ACIF/2016/139). Maria Ruiz-Rico acknowledges the Generalitat Valenciana for her Postdoctoral Fellowship (APOSTD/2019/118).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improving the innovation ability of engineering students: a Science and Technology Innovation Community organisation network analysis

  • Zhang, Jingxiao
  • Li, Rui
  • Li, Hui
  • Skitmore, Martin
  • Ballesteros-Pérez, Pablo|||0000-0002-4629-9664
[EN] Science and Technology Innovation Communities (STICs) are student-led partnerships that bring together businesses, research centres, and university staff. They constitute an effective way of promoting student innovation ability. However, the students¿ position within the STICs organisation network may condition how their innovation ability is effectively acquired. Using Social Network Analysis (SNA), this study measures how the STICs organisation network promotes the innovation ability of its actors. The paper finds that network centrality and structural holes of the STICs organisation network are positively correlated with student innovation ability. The results are validated through robustness tests in three different STICs, involving engineering students from China¿s Chang¿an University. Semi-structured interviews are also conducted with 20 relevant actors of STICs. The conclusion suggests that a higher involvement of core actors, more support from schools, and more restrictive entry requirements are necessary to improve the organisation management and training level of engineering students in STICs., This work was supported by the National Natural Science Foundation of China [grant number 71301013]; Humanity and Social Science Program Foundation of the Ministry of Education of China [grant number 17YJA790091]; List of Key Science and Technology Projects in China's Transportation Industry in 2018-International Science and Technology Cooperation Project [grant number 2018-GH-006]; Fundamental Research for Funds for the Central Universities (Humanities and Social Sciences) [grant number 300102239616], Chang'an University [grant number 300102418659]; Education Funding of Master of Engineering Management in China [grant number 2017-ZX-004]; Xi'an Social Science Fund [grant number 18J139]; Shaanxi Province Civil Engineering 'first-class professional' project [grant numbers 300103292804 and 300103282803]; Xi'an Construction Science and Technology Planning Project [grant number SJW201705]; Shaanxi Province Higher Education Teaching Reform Project [grant number 17BZ017]; Shaanxi Social Science Fund [grant numbers 2017S004 and 2016ZB017]; Xi'an Science Technology Bureau Fund [grant number 201805070RK1SF4(6)]; Fundamental Research for Funds for the Central Universities, Chang'an University [grant number 300102238201]; Fundamental Research for Education Reform of Central College, Chang'an University [grant numbers 300104282301, 300104282318 and 300104282323]; Special Fund for Graduate Student Education Reform of Central College, Chang'an University [grant numbers 300111002005, 300103187091 and 310628161406]. Xi'an Science Technology Bureau Fund Construction Science and Technology Planning Project Social Science Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Properties and controlled release of chitosan microencapsulated limonene oil

  • Souza, Jefferson M.
  • Caldas, Artemísia L.
  • Tohidi, Shafagh D.
  • Souto, A.P.
  • Fangueiro, Raul
  • Zille, Andrea
  • Molina Puerto, Javier|||0000-0003-3378-8271
[EN] Chitosan microcapsules containing limonene essential oil as active ingredient were prepared by coacervation using three different concentrations of NaOH (0.50, 1.00, 1.45 wt%) and fixed concentrations of chitosan and surfactant of 0.50 wt%. The produced microcapsules were fully characterized in their morphology and chemical composition, and the kinetic release analysis of the active ingredient was evaluated after deposition in a non-woven cellulose fabric. The concentration of 1.00 and 1.45 wt% clearly show the best results in terms of dimension and shape of the microcapsules as well as in the volatility results. However, at the concentration of 1 wt% a higher number of microcapsules were produced as confirmed by FTIR and EDS analysis. Free microcapsules are spherical in size with disperse diameters between 2 and 12 μm. Immobilized microcapsules showed sizes from 4 to 7 μm, a rough surface and loss of spherical shape with pore formation in the chitosan walls. SEM analysis confirms that at higher NaOH concentrations, the larger the size of the microcapsules. This technique shows that by tuning NaOH concentration it is possible to efficiently control the release rate of encapsulated active agents demonstrating great potential as insect repellent for textiles. © 2014 Sociedade Brasileira de Farmacognosia. Published by Elsevier Editora Ltda. All rights reserved, JMS and ALC acknowledge CAPES Foundation, the Ministry of Education of Brazil, Proc. nº 8976/13-9 e Proc. Nº 1071/13- 0, respectively, and the Department of Textile Engineering of the University of Minho, Portugal. J. Molina is grateful to the Conselleria d’Educació, Formació i Ocupació (Generalitat Valenciana) for the Programa VALi+D Postdoctoral Fellowship. AZ (C2011- UMINHO-2C2T-01) acknowledges funding from Programa Compromisso para a Ciência 2008, Portugal. Shafagh Dinparast Tohidi would like to thank the Portuguese Foundation of Science and Technology for providing the PhD grant SFRH/ BD/94759/2013.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enantioselective Synthesis of 5-Trifluoromethyl-2-oxazolines under Dual Silver/Organocatalysis

  • Martinez-Pardo, Pablo
  • Blay, Gonzalo
  • Vila, Carlos
  • Sanz-Marco, Amparo
  • Pedro, Jose R.
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] The first enantioselective formal [3 + 2] cycloaddition between ¿-isocyanoesters and trifluoromethylketones to give 5-trifluoromethyl-2-oxazolines bearing two contiguous stereogenic centers, one of them being a quaternary stereocenter substituted with a CF3 group, has been developed. The reaction is based upon a multicatalytic approach that combines a bifunctional Brønsted base-squaramide organocatalyst and Ag+ as Lewis acid. The reaction could be achieved with a range of aryl and heteroaryl trifluoromethyl ketones, and the resulting oxazolines were obtained with good to excellent diastereo- and enantioselectivity., Financial support from the MINECO and FEDER (CTQ2017-84900-P). Access to NMR and MS facilities from SCSIE-UV. C.V. thanks the Spanish Government for a Ramon y Cajal contract (RyC-2016-20187). A.S.-M. thanks the Generalitat Valenciana and Fondo Social Europeo for a postdoctoral grant (APOST/2016/139).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Rational Design of Simple Organocatalysts for the HSiCl3 Enantioselective Reduction of (E)-N-(1-Phenylethylidene)aniline

  • Maciá, María
  • Porcar, Raúl
  • García-Verdugo, Eduardo
  • Burguete, Maria Isabel
  • Luis, Santiago V.
  • Martí-Centelles, Vicente|||0000-0002-9142-9392
[EN] Prolinamides are well-known organocatalysts for the HSiCl3 reduction of imines; however, custom design of catalysts is based on trial-and-error experiments. In this work, we have used a combination of computational calculations and experimental work, including kinetic analyses, to properly understand this process and to design optimized catalysts for the benchmark (E)-N-(1-phenylethylidene)aniline. The best results have been obtained with the amide derived from 4-methoxyaniline and the N-pivaloyl protected proline, for which the catalyzed process is almost 600 times faster than the uncatalyzed one. Mechanistic studies reveal that the formation of the component supramolecular complex catalyst-HSiCl3-substrate, involving hydrogen bonding breaking and costly conformational changes in the prolinamide, is an important step in the overall process., This research was funded by Generalitat Valenciana, grant number PROMETEO/2016/071 and AICO/2021/139, Pla de Promocio de la Investigacio de la Universitat Jaume I, grant number UJI-B2019-40 and Ministerio de Ciencia, Innovacion y Universidades, grant number RTI2018098233-B-C22. V.M.-C. acknowledges the financial support from Generalitat Valenciana (CIDEGENT/2020/031).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Stereotomy and Composition in Maya Architecture: The Medial Moulding at the Palace of the Governor at Uxmal (Yucatán, México)

  • Rosado Torres, Ana Laura
  • Gilabert Sansalvador, Laura|||0000-0001-7890-5334
  • Muñoz Cosme, Gaspar|||0000-0002-2285-3173
[EN] The medial moulding is a defining architectural element in monumental Maya architecture, serving compositional, structural, and constructive functions. This study examines its stereotomy, craftsmanship, and architectural role in the Palace of the Governor at Uxmal (Yucatán, México), a prime example of Late Puuc architecture. By tracing its evolution across Puuc substyles, the research explores its transformation from simple rectangular forms to complex multi-member arrangements. Based on in-situ documentation—combining direct visual inspection with digital techniques—and supported by bibliographic sources, the study identifies and classifies the masonry pieces comprising the medial moulding, analysing their geometry, standardisation, and contribution to architectural composition. The findings reveal a high degree of precision and specialisation in the carving process, demonstrating the builders’ capacity for the seamless integration of architectural components. The study ultimately underscores the medial moulding’s significance as both an aesthetic and structural unifying element. , This research was funded by the Generalitat Valenciana – Conselleria d’Innovació, Universitats, Ciència i Societat Digital through the Santiago Grisolía Grants Program (GRISOLIAP/2018/139).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermoalkaline pretreatment as a key step to poly-lactic acid (PLA) biodegradation in anaerobic digesters

  • Lera, M.
  • Ferrer, J. F.
  • Martí Ortega, Nuria
  • Santonja-Coloma, Marina
  • Serralta Sevilla, Joaquín|||0000-0001-5015-0689
[EN] Among various end-of-life options for polylactic acid (PLA), anaerobic digestion (AD) has emerged as a promising strategy for its valorisation. However, PLA exhibits limited biodegradability under standard AD conditions (35 degrees C, 20-25 days). This study aims to increase the biodegradability of PLA through various pretreatments, thereby facilitating its effective co-digestion with wastewater treatment plant (WWTP) sludge. With this aim, different pretreatments (physical, chemical, and enzymatic) were evaluated at laboratory scale to determine the most effective. This study provides a systematic evaluation of operational parameters and a comprehensive comparison of pretreatment methods for PLA to achieve its anaerobic degradation in WWTPs. Chemical pretreatment (alkaline hydrolysis with NaOH) exhibited the highest efficiency, achieving complete hydrolysis and 75-80 % biodegradability in biomethane potential assays. Twelve chemical pretreatment experiments were conducted at various temperatures ranging from 30 to 90 degrees C and NaOH concentrations from 0.3 M to 1 M. The hydrolysis rates increased with both temperature and NaOH concentration. Alkaline hydrolysis with NaOH depolymerised PLA into lactate monomers, which are readily biodegradable under AD conditions. This process allows PLA to be integrated into AD systems at WWTPs, promoting renewable energy generation. A novel first-order kinetics model was developed to describe the PLA hydrolysis considering temperature and NaOH concentration. Reaction rates rose with both, from 6 L & sdot;mg-1 & sdot;h-1 at 30 degrees C to 48 L & sdot;mg-1 & sdot;h-1 at 90 degrees C. The model reproduced the temporal evolution of soluble chemical oxygen demand, with predicted values closely matching experimental data (R2 = 0.983), demonstrating its robustness in capturing PLA hydrolysis kinetics., This research work was supported by the Agencia Valenciana de la Innovacio (AVI) of the Generalitat Valenciana (Spain) through the Project "VALPLAST" (INNEST/2023/198 and INNEST/2023/139, which is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enantioselective synthesis of chiral oxazolines from unactivated ketones and isocyanoacetate esters by synergistic silver/organocatalysis

  • Martínez-Pardo, P.
  • Blay, G.
  • Pedro, J. R.
  • Sanz-Marco, A
  • Vila, C.
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] A multicatalytic approach that combines a bifunctional Brønsted base¿squaramide organocatalyst and Ag+ as Lewis acid has been applied in the reaction of unactivated ketones with tert-butyl isocyanoacetate to give chiral oxazolines bearing a quaternary stereocenter. The formal [3+2] cycloaddition provided high yields of the corresponding cis-oxazolines with good diastereoselectivity and excellent enantioselectivity, being applied to aryl¿alkyl and alkyl¿alkyl ketones., Financial support from the Ministerio de Economia, Industria y Competitividad (Gobierno de Espana) and FEDER (European Union) (CTQ2017-84900-P) is acknowledged. C. V. thanks the Spanish Government for a Ramon y Cajal contract (RyC-2016-20187). A. S.-M. thanks the Generalitat Valenciana and Fondo Social Europeo for a post-doctoral grant (APOST/2016/139).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new brain dedicated PET scanner with 4D detector information

  • González-Montoro, Andrea
  • Barbera Ballester, Julio
  • Mondejar, Álvaro
  • Díaz González, Karel
  • Lucero-Ruiz, Alejandro
  • Alamo Valenzuela, Jorge
  • Morera Ballester, Constantino
  • Cucarella, Neus
  • Ilisie, Victor
  • Valladares de-Francisco, Celia
  • John Prior
  • Sanchez-Gonzalo, David
  • Freire-López-Fando, Marta
  • Jiménez-Serrano, Santiago|||0000-0003-2917-6053
  • Barrio-Toala, John|||0000-0001-5181-2146
  • Moliner Martínez, Laura
  • González Martínez, Antonio Javier
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] In this article, we present the geometrical design and preliminary results of a high sensitivity organ-specific Positron Emission Tomography (PET) system dedicated to the study of the human brain. The system, called 4D-PET, will allow accurate imaging of brain studies due to its expected high sensitivity, high 3D spatial resolution and, by including precise photon time of flight (TOF) information, a boosted signal-to-noise ratio (SNR). The 4D-PET system incorporates an innovative detector design based on crystal slabs (semi-monolithic) that enables accurate 3D photon impact positioning (including photon Depth of Interaction (DOI) measurement), while providing a precise determination of the photon arrival time to the detector. The detector includes a novel readout system that reduces the number of detector signals in a ratio of 4:1 thus, alleviating complexity and cost. The analog output signals are fed to the TOFPET2 ASIC (PETsys) for scalability purposes. The present manuscript reports the evaluation of the 4D-PET detector, achieving best values 3D resolution values of <1.6 mm (pixelated axis), 2.7±0.5 mm (monolithic axis) and 3.4±1.1 (DOI axis) mm; 359 ± 7 ps coincidence time resolution (CTR); 10.2±1.5 % energy resolution; and sensitivity of 16.2% at the center of the scanner (simulated). Moreover, a comprehensive description of the 4D-PET architecture (that includes 320 detectors), some pictures of its mechanical assembly, and simulations on the expected image quality are provided., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 695536). This work was supported in part by the Spanish Government Grants Generalitat Valenciana, APOSTD/2019/086 and APOSTD/2020/139.We thank financial support from Generalitat Valenciana through the program Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Continuous catalytic process for the selective dehydration of glycerol over Cu-based mixed oxide

  • Mazarío-Santa-Pau, Jaime
  • Ventura, María
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Domine, Marcelo Eduardo
[EN] The selective dehydration of glycerol to hydroxyacetone (acetol) was studied with Cu-based mixed oxides derived from hydrotalcite as catalysts in a continuous flow fix-bed reactor. Catalysts were prepared by co-precipitation and characterized by ICP, N-2 adsorption, XRD, NH3-TPD, CO2-TPD, TPR and TEM. Different parameters were investigated to develop the most appropriate material as well as to determine the function of every metallic species. The optimized Cu-Mg-AlOx offered approximate to 60% acetol selectivity at >90% glycerol conversion (approximate to 80% liquid yield, up to TOS = 9 h). The catalyst could be regenerated by calcination, achieving full activity recovery after five re-cycles. "In-situ" FTIR and XPS measurements evidenced that the presence of Cu, specially the most active Cu1+ species, was essential to carry out the dehydration to acetol with high reaction rates, and to form the preferred intermediate (with C=O group); although a minor contribution from Cu-0 and Cu2+ species could not be discarded., Financial support by Spanish Government (CTQ-2015-67592, PGC2018-097277-B-100 and SEV-2016-0683) and PhosAgro/UNESCO/IUPAC Partnership (Proj. 139) is gratefully acknowledged. J.M. also thanks Spanish Government (CTQ-2015-67592) for his FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Digitizing an Excavation: A Laser Scanning Database of Maya Architectural Remains

  • Montuori, Riccardo
  • Rosado-Torres, Ana Laura
  • Gilabert Sansalvador, Laura|||0000-0001-7890-5334
  • Muñoz Cosme, Gaspar|||0000-0002-2285-3173
[EN] Excavating an ancient Maya city requires a long-term archaeological project that entails adequate documentation procedures for the unearthed remains, frequently of monumental scale and with difficult preservation conditions. A digital laser scanner survey methodology was designed and implemented to document the exposed architecture and to follow-up the archaeological excavation of the Maya site of La Blanca (Peten, Guatemala). All scans collected during the different field seasons were stored and aligned in a common reference system. Thus, an accurate digital three-dimensional database was obtained, including all the architectural remains found, some of which had to be reburied to ensure their preservation. The resulting database is a helpful repository that facilitates to extract all the graphic outputs required for: planning the next excavation campaigns, monitoring the preservation of the buildings, studying the architecture and construction technology in detail, and disseminating the excavation results. This paper describes the methodology and procedures used to build-up this database., The work for this article has been carried out in the project Arquitectura maya. Sistemas constructivos, estética formal, simbolismo y nuevas tecnologías (PGC2018-098904-B-C21) which is funded from the Spanish Ministry of Science, Innovation and Universities. It was also supported by Universitat Politècnica de València under the Research and Development Grants Program (PAID-01-17); Generalitat Valenciana and European Social Fund (APOSTD/2020/004) and the Santiago Grisolía grants program (GRISOLIAP/2018/139). The authors acknowledge La Blanca Project (https://www.uv.es/arsmaya/proyecto.html), funded by the Spanish Ministry of Culture through the Programa de excavaciones arqueológicas en el exterior, and greatly appreciate the suggestions for improvement by the reviewers who dedicated their valuable time and efforts in reviewing this manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Spatio-temporal ultrasound beam modulation to sequentially achieve multiple foci with a single planar monofocal lens

  • Pérez-López, Sergio
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
[EN] Ultrasound focusing is a hot topic due to its multiple applications in many fields, including biomedical imaging, thermal ablation of cancerous tissues, and non destructive testing in industrial environments. In such applications, the ability to control the focal distance of the ultrasound device in real-time is a key advantage over conventional devices with fixed focal parameters. Here, we present a method to achieve multiple time-modulated ultrasound foci using a single planar monofocal Fresnel Zone Plate. The method takes advantage of the focal distance linear dependence on the operating frequency of this kind of lenses to design a sequence of contiguous modulated rectangular pulses that achieve different focal distances and intensities as a function of time. Both numerical simulations and experimental results are presented, demonstrating the feasibility and potential of this technique., This work has been supported by Spanish MICINN project number RTI2018-100792-B-I00 and Generalitat Valenciana project AICO/2020/139. S.P.-L. acknowledges financial support from Universitat Politecnica de Valencia Grant program PAID-01-18.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Inorganic Polyphosphate in Hematolymphoid Malignancies: Biological Rationale and Emerging Research Gaps

  • García-Domínguez, Francisco
  • Fernández Ponce, Cecilia Matilde
  • Salb-Pernas, Carlota
  • Santisteban Espejo, Antonio Leopoldo
  • Ruiz Rodríguez, Félix Alejandro
Inorganic polyphosphates (polyP) are linear phosphate polymers that play essential functions in human physiology, such as coagulation and inflammation. Despite their recognized participation in solid tumor progression, there are few data on hematolymphoid malignancies. Here, we conducted a narrative review of studies investigating polyP functions in mammalian biology, coagulation, and hematologic systems, focusing on research gaps in hematological oncology. PolyP modulates coagulation cascades, platelet activation, and cellular metabolism. In tumors, polyP has been reported to modulate immune responses and apoptosis in several experimental systems. Emerging data suggest participation in leukemic signaling and the bone marrow microenvironment. Direct evidence linking polyP to hematolymphoid neoplasms is scarce. Being biologically plausible, it represents a promising and largely unexplored area of research and an excellent opportunity for novel therapeutic approaches.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Reviewing the Ecosystem Services, Societal Goods, and Benefits of Marine Protected Areas

  • Marcos, Concepción
  • Díaz, David
  • Fietz, Katharina
  • Forcada, Aitor
  • Ford, Amanda
  • García-Charton, José Antonio
  • Goñi, Raquel
  • Lenfant, Philippe
  • Mallol, Sandra
  • Mouillot, David
  • Pérez-Marcos, María
  • Puebla, Oscar
  • Manel, Stéphanie
  • Pérez-Ruzafa, Angel
  • Forcada, Aitor|||/items/98b3f605-8734-416c-a338-ddab1b50dbaf
Marine protected areas (MPAs) are globally important environmental management tools that provide protection from the effects of human exploitation and activities, supporting the conservation of marine biological diversity, habitats, ecosystems and the processes they host, as well as resources in a broad sense. Consequently, they are also expected to manage and enhance marine ecosystem services and material, non-material, consumptive and non-consumptive goods, and benefits for humans. There is however certain confusion on what constitutes an ecosystem service, and it is not always easy to distinguish between them and societal benefits. The main nuance is that an ecosystem service is the aptitude an ecosystem has or develops naturally or as consequence of a management action, and that manifests through its own properties (productivity, diversity, stability, quality of its key parameters, etc.), while a societal benefit is the economic or other profitability (emotional, educational, scientific, etc.) that humans obtain from said service or quality. In this work, 268 publications, together with our own experiences in the different investigations carried out in the MPAs that are part of the BiodivERsA3-2015-21 RESERVEBENEFIT European project, have been selected, reviewed and discussed to analyze the knowledge status of the expected ecosystem services of MPAs and the societal benefits derived from them, sometimes providing information on their evidence, when they exist. We define and classify the effects of protection, ecosystem services and societal benefits and elaborate a conceptual model of the cause-effect relationships between them.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Multiparametric in vitro and in vivo analysis of the safety profile of self-assembling peptides

  • Ramirez-Labrada, Ariel
  • Santiago, Llipsy
  • Pesini, Cecilia
  • Arrieta, Marta
  • Arias, Maykel
  • Calvo Pérez, Adanays
  • Ciulla, Maria Gessica
  • Forouharshad, Mahdi
  • Pardo, Julian
  • Gálvez, Eva M.
  • Gelain, Fabrizio
Self-assembling peptides (SAPs) have gained significant attention in biomedicine because of their unique properties and ability to undergo molecular self-assembly driven by non-covalent interactions. By manipulating their composition and structure, SAPs can form well-ordered nanostructures with enhanced selectivity, stability and biocompatibility. SAPs offer advantages such as high chemical and biological diversity and the potential for functionalization. However, studies concerning its potentially toxic effects are very scarce, a limitation that compromises its potential translation to humans. This study investigates the potentially toxic effects of six different SAP formulations composed of natural amino acids designed for nervous tissue engineering and amenable to ready cross-linking boosting their biomechanical properties. All methods were performed in accordance with the relevant guidelines and regulations. A wound-healing assay was performed to evaluate how SAPs modify cell migration. The results in vitro demonstrated that SAPs did not induce genotoxicity neither skin sensitization. In vivo, SAPs were well-tolerated without any signs of acute systemic toxicity. Interestingly, SAPs were found to promote the migration of endothelial, macrophage, fibroblast, and neuronal-like cells in vitro, supporting a high potential for tissue regeneration. These findings contribute to the development and translation of SAP-based biomaterials for biomedical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Selective Detection of Active Extracellular Granzyme A by Using a Novel Fluorescent Immunoprobe with Application to Inflammatory Diseases

  • Senan-Salinas, Ana
  • Comas, Laura
  • Esteban, Patricia
  • Garzón-Tituaña, Marcela
  • Cheng, Zhiming
  • Santiago, Llipsy
  • Domingo, Maria Pilar
  • Ramírez-Labrada, Ariel
  • Paño-Pardo, José Ramón
  • Vendrell, Marc
  • Pardo, Julián
  • Arias, Maykel A.
  • Galvez, Eva M.
Granzymes (Gzms), a family of serine proteases, expressed by immune and nonimmune cells, present perforin-dependent and independent intracellular and extracellular functions. When released in the extracellular space, GzmA, with trypsin-like activity, is involved in the pathophysiology of different inflammatory diseases. However, there are no validated specific systems to detect active forms of extracellular GzmA, making it difficult to assess its biological relevance and potential use as a biomarker. Here, we have developed fluorescence-energy resonance-transfer (FRET)-based peptide probes (FAM-peptide-DABCYL) to specifically detect GzmA activity in tissue samples and biological fluids in both mouse and human samples during inflammatory diseases. An initial probe was developed and incubated with GzmA and different proteases like GzmB and others with similar cleavage specificity as GzmA like GzmK, thrombin, trypsin, kallikrein, or plasmin. After measuring fluorescence, the probe showed very good specificity and sensitivity for human and mouse GzmA when compared to GzmB, its closest homologue GzmK, and with thrombin. The specificity of this probe was further refined by incubating the samples in a coated plate with a GzmA-specific antibody before adding the probe. The results show a high specific detection of soluble GzmA even when compared with other soluble proteases with very similar cleavage specificity like thrombin, GzmK, trypsin, kallikrein, or plasmin, which shows nearly no fluorescence signal. The high specific detection of GzmA was validated, showing that using pure proteins and serum and tissue samples from GzmA-deficient mice presented a significant reduction in the signal compared with WT mice. The utility of this system in humans was confirmed, showing that GzmA activity was significantly higher in serum samples from septic patients in comparison with healthy donors. Our results present a new immunoprobe with utility to detect extracellular GzmA activity in different biological fluids, confirming the presence of active forms of the soluble protease in vivo during inflammatory and infectious diseases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Loop engineering of enzymes to control their immobilization and ultimately fabricate more efficient heterogeneous biocatalysts

  • Zeballos, Nicoll
  • Ginés-Alcober, Irene
  • Macías-León, Javier
  • Andrés-Sanz, Daniel
  • González-Ramírez, Andrés Manuel
  • Sánchez-Costa, Mercedes
  • Merino, Pedro
  • Hurtado-Guerrero, Ramón
  • López-Gallego, Fernando
Enzyme immobilization is indispensable for enhancing enzyme performance in various industrial applications. Typically, enzymes require specific spatial arrangements for optimal functionality, underscoring the importance of correct orientation. Despite well‐known N‐ or C‐terminus tailoring techniques, alternatives for achieving orientation control are limited. Here, we propose a novel approach that tailors the enzyme surface with engineered His‐rich loops. To that aim, we first solve the X‐ray crystal structure of a hexameric alcohol dehydrogenase from Thermus thermophilus HB27 (TtHBDH) (PDB: 9FBD). Guided by this 3D structure, we engineer the enzyme surface with a new loop enriched with six His residues to control enzyme orientation. Molecular dynamics simulations reveal that the engineered loop's imidazole rings have greater solvent accessibility than those in native His residues, allowing for more efficient enzyme immobilization on certain metal chelate‐functionalized carriers. Using carriers functionalized with iron (III)‐catechol, the apparent Vmax of the immobilized loop variant doubles the immobilized His‐tagged one, and vice versa when both variants are immobilized on carriers functionalized with copper (II)‐imidodiacetic acid. His‐tagged and loop‐engineered TtHBDH show high operational stability reaching 100% bioconversion after 10 reaction cycles, yet the loop variant is faster than the His‐tagged one.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mutant calreticulin enables potent and selective CAR-T cell therapy in preclinical models of myeloproliferative neoplasms

  • Pesini, Cecilia
  • Gil-Bellido, Mario
  • Millán, Lorena S.
  • Oñate, Carmen
  • Calvo-Pérez, Adanays
  • Santiago, Llipsy
  • Iglesias, Eldris
  • Bernal, Jorge Paúl
  • Araujo-Voces, Miguel
  • Paz Artigas, Laura
  • García-Martínez, Laura
  • Roig, Francisco J
  • Movilla Meno, Nieves
  • Garcia-Aznar, José Manuel
  • Menéndez-Jandula, Bárbara
  • Olave, María Teresa
  • Azaceta Reinares, Gemma
  • Garrote, Marta
  • Alvarez-Larrán, Alberto
  • Gálvez, Eva M
  • Sánchez Martínez, Diego
  • Arias, Maykel A
  • Pardo, Julian
  • Ramirez-Labrada, Ariel
Background The adoptive transfer of T cells engineered to express chimeric antigen receptors (CAR-T) has shown high efficacy and safety in treating various hematologic malignancies. However, many hematologic disorders, such as BCR::ABL1-negative myeloproliferative neoplasms (MPNs), lack effective treatment options. Some of these neoplasms are marked by a recurrent mutation that results in the expression of mutant calreticulin (mCALR), a neoantigen absent in healthy tissues, making it a highly specific and appealing target for CAR-T cell therapy. Methods Five distinct CARs were designed based on available monoclonal antibody sequences that target mCALR and were subsequently used to generate CAR-T cells. The most effective construct was selected through functional in vitro assays against mCALR-positive cell lines. Its efficacy was then evaluated in cell lines, patient-derived cells, and orthotopic xenograft models, assessing tumor burden, CAR-T cell infiltration, and animal survival. Bulk and single-cell RNA sequencing were performed on patient-derived cells and residual tumor cells from CART-treated mice, respectively, to investigate potential resistance mechanisms. The impact of the most relevant pathway alteration on CAR-T efficacy was also analyzed. Pharmacological rescue assays using targeted agents were then conducted. Results Among the five constructs, one demonstrated superior and specific cytotoxicity against mCALR-expressing cells, with no activity against mCALR-negative controls. This CAR-T cell also eliminated patient-derived MPN cells and controlled disease progression in xenograft models, which correlated with the persistence of CAR-T cells and tumor infiltration. Transcriptomic profiling of patient samples and residual tumor cells in spleens of treated mice revealed upregulation of anti-apoptotic proteins. Functional assays confirmed reduced CAR-T efficacy in Bcl-2 high cells, which was restored by co-treatment with venetoclax, indicating a viable combination approach to overcome resistance. Conclusions This study demonstrates, for the first time, the successful targeting of mCALR with CAR-T cells as a therapeutic strategy for MPNs. The chosen construct shows strong preclinical efficacy against established cell lines and patient-derived cells. Additionally, transcriptomic profiling uncovered apoptosis resistance mechanisms and supports a combination strategy with BH3 mimetics, such as venetoclax. These findings provide a compelling rationale for ongoing preclinical development and future clinical application of anti-mCALR CAR-T cells for the treatment of MPNs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Lytic IFNγ is stored in cytotoxic granules and coreleased with granzyme B to mediate cytotoxic T lymphocyte killing

  • Li, Xuemei
  • Schirra, Claudia
  • Wirkner, Marie-Louise
  • Tu, Szu-Min
  • Lin, Chin-Hsin
  • Hohmann, Meltem
  • Gu, Yuan
  • Santiago, Llipsy
  • Pardo, Julian
  • Arretxe, Iñaki
  • Alawar, Nadia
  • Chouaib, Abed Alrahman
  • Becherer, Ute
  • Lee, Po-Hsien
  • Hsu, Hao-Jen
  • Laschke, Matthias W.
  • Baldari, Cosima T.
  • Dustin, Michael L.
  • Rettig, Jens
  • Krause, Elmar
  • Chang, Hsin-Fang
Cytotoxic T lymphocytes (CTLs) eliminate target cells by forming immunological synapses and releasing effector molecules, including interferon gamma (IFNγ). However, how IFNγ contributes to cytotoxicity remains unclear. Here, we identify a subset of IFNγ stored within granzyme B⁺ cytotoxic granules (CGs) in activated mouse and human CTLs, which we term lytic IFNγ. This CG-associated IFNγ represents the primary pool released in a polarized manner at the immunological synapse together with canonical lytic molecules. Lytic IFNγ is present in tumor-infiltrating CTLs and is cosecreted with granzyme B (GzmB) in both soluble form and as part of supramolecular attack particles (SMAPs). Functional assays indicate that IFNγ contributes to CTL-mediated tumor cell death by acting in concert with granzyme B and perforin to increase cytotoxicity and promote apoptosis via the IFNγ–STAT1–caspase-3 pathway. CTLs lacking the vesicle priming factor Munc13-4 exhibit impaired release of both CGs and early-phase IFNγ. However, prolonged synapse engagement restores IFNγ secretion at distal membrane sites, revealing a second, nonpolarized IFNγ pool. Consistently, endogenous IFNγ is detected in both CG-enriched and multivesicular body (MVB)-enriched fractions. We propose that while lytic IFNγ is released from CGs at the synapse to directly promote target cell killing, nonpolarized IFNγ secretion originates from MVBs or small vesicles during sustained activation. Together, these findings reveal a previously unrecognized mechanism of IFNγ storage and release, establishing lytic IFNγ as a critical effector component of CTL cytotoxicity and antitumor immunity.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Prognostic impact of DNMT3A mutation in acute myeloid leukemia with mutated NPM1

  • Oñate, Guadalupe|||0000-0003-2180-2371
  • Bataller, Alex|||0000-0002-6085-2745
  • Garrido Diaz, Ana|||0000-0002-5297-8946
  • Hoyos Colell, Montserrat|||0000-0002-1911-1734
  • Arnan, Montserrat
  • Vives Polo, Susana|||0000-0003-2217-5285
  • Coll, Rosa|||0000-0003-0560-1254
  • Tormo, Mar|||0000-0001-9622-1649
  • Sampol, Antonia|||0000-0001-7465-6203
  • Escoda, Lourdes|||0000-0003-3288-9716
  • Salamero, Olga|||0000-0003-3237-0025
  • Garcia-Guiñon, Antonio|||0000-0003-0006-4162
  • Bargay, Joan|||0000-0002-6739-3916
  • Aljarilla, Alba
  • Nomdedeu Guinot, Jose Francisco|||0000-0003-3399-346X
  • Esteve Reyner, Jordi|||0000-0002-8056-648X
  • Sierra, Jorge|||0000-0002-7966-0356
  • Pratcorona, Marta|||0000-0001-6375-596X
The negative prognostic impact of internal tandem duplication of FLT3 (FLT3- ITD) in patients with acute myeloid leukemia with mutated NPM1 (AML- NPM1) is restricted to those with a higher FLT3 -ITD allelic ratio (FLT3 high ; ≥0.5) and considered negligible in those with a wild-type (FLT3 WT)/low ITD ratio (FLT3 low). Because the comutation of DNMT3A (DNMT3A mut) has been suggested to negatively influence prognosis in AML- NPM1, we analyzed the impact of DNMT3A mut in FLT3 -ITD subsets (absent, low, and high ratios). A total of 164 patients diagnosed with AML- NPM1 included in 2 consecutive CETLAM protocols and with DNMT3A and FLT3 status available were studied. Overall, DNMT3A mut status did not have a prognostic impact, with comparable overall survival (P =.2). Prognostic stratification established by FLT3 -ITD (FLT3 WT = FLT3 low.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Who smokes in europe? Data from 12 european countries in the tackshs survey (2017-2018)

  • Gallus, Silvano|||0000-0002-8967-0400
  • Lugo, Alessandra|||0000-0002-4297-6496
  • Liu, Xiaoqiu|||0000-0001-8620-6592
  • Behrakis, Panagiotis
  • Boffi, Roberto|||0000-0002-1657-1591
  • Bosetti, Cristina|||0000-0003-2090-4608
  • Carreras, Giulia|||0000-0002-1427-637X
  • Chatenoud, Liliane|||0000-0001-9599-8229
  • Clancy, Luke|||0000-0003-2407-2263
  • Continente, Xavier|||0000-0003-4888-2754
  • Dobson, Ruaraidh|||0000-0001-8136-8373
  • Effertz, Tobias
  • Filippidis, Filippos T.
  • Fu, Marcela|||0000-0002-4962-0927
  • Geshanova, Gergana
  • Gorini, Giuseppe|||0000-0002-1413-5948
  • Keogan, Sheila
  • Ivanov, Hristo
  • López Medina, María José|||0000-0003-4402-2239
  • López-Nicolás, Ángel|||0000-0003-3112-7779
  • Precioso, José|||0000-0002-7889-8290
  • Przewozniak, Krzysztof
  • Radu-Loghin, Cornel|||0000-0002-9922-4535
  • Ruprecht, Ario Alberto
  • Semple, Sean|||0000-0002-0462-7295
  • Soriano, Joan B.|||0000-0001-9740-2994
  • Starchenko, Polina
  • Trapero-Bertran, Marta|||0000-0002-9233-1776
  • Tigova, Olena|||0000-0002-4002-116X
  • Tzortzi, Anna S.|||0000-0003-2420-7922
  • Vardavas, Constantine|||0000-0003-0171-9570
  • Vyzikidou, Vergina Konstantina
  • Colombo, Paolo
  • Fernández, Esteve|||0000-0003-4239-723X
Background: Population data on tobacco use and its determinants require continuous monitoring and careful inter-country comparison. We aimed to provide the most up-to-date estimates on tobacco smoking from a large cross-sectional survey, conducted in selected European countries. Methods: Within the TackSHS Project, a face-to-face survey on smoking was conducted in 2017-2018 in 12 countries: Bulgaria, England, France, Germany, Greece, Ireland, Italy, Latvia, Poland, Portugal, Romania, and Spain, representing around 80% of the 432 million European Union (EU) adult population. In each country, a representative sample of around 1,000 subjects aged 15 years and older was interviewed, for a total of 11,902 participants. Results: Overall, 25.9% of participants were current smokers (31.0% of men and 21.2% of women, P < 0.001), while 16.5% were former smokers. Smoking prevalence ranged from 18.9% in Italy to 37.0% in Bulgaria. It decreased with increasing age (compared to <45, multivariable odds ratio [OR] for ≥65 year, 0.31; 95% confidence interval [CI], 0.27-0.36), level of education (OR for low vs high, 1.32; 95% CI, 1.17-1.48) and self-rated household economic level (OR for low vs high, 2.05; 95% CI, 1.74-2.42). The same patterns were found in both sexes. Conclusions: These smoking prevalence estimates represent the most up-to-date evidence in Europe. From them, it can be derived that there are more than 112 million current smokers in the EU-28. Lower socio-economic status is a major determinant of smoking habit in both sexes.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Use and Awareness of Heated Tobacco Products in Europe

  • Gallus, Silvano|||0000-0002-8967-0400
  • Lugo, Alessandra|||0000-0002-4297-6496
  • Liu, Xiaoqiu|||0000-0001-8620-6592
  • Borroni, Elisa
  • Clancy, Luke|||0000-0003-2407-2263
  • Gorini, Giuseppe|||0000-0002-1413-5948
  • López Medina, María José|||0000-0003-4402-2239
  • Odone, Anna
  • Przewozniak, Krzysztof
  • Tigova, Olena|||0000-0002-4002-116X
  • van den Brandt, Piet A.
  • Vardavas, Constantine|||0000-0003-0171-9570
  • Fernández, Esteve|||0000-0003-4239-723X
Background: Heated tobacco products (HTP) are new forms of tobacco consumption with limited information available on their use among the general population. Our objective was to analyze the prevalence and associations of use of HTP across 11 countries in Europe. Methods: Within the TackSHS Project, in 2017-2018 we conducted a cross-sectional study with information on HTP use in the following countries: Bulgaria, England, France, Germany, Greece, Italy, Latvia, Poland, Portugal, Romania and Spain. In each country, face-to-face interviews were performed on a representative sample of around 1,000 subjects aged ≥15 years, for a total of 10,839 subjects. Results: Overall, 27.8% of study participants were aware of HTPs, 1.8% were ever HTP users (ranging from 0.6% in Spain to 8.3% in Greece), and 0.1% were current users. Men were more frequently HTP ever users than women (adjusted odds ratio [aOR] 1.47; 95% confidence interval [CI], 1.11-1.95). Ever HTP use was inversely related to age (P for trend <0.001) and more frequent in ex-smokers (compared with never smokers, aOR 4.32; 95% CI, 2.69-6.95) and current smokers (aOR 8.35; 95% CI, 5.67-12.28), and in electronic cigarette past users (compared with never users, aOR 5.48; 95% CI, 3.46-8.68) and current users (aOR 5.92; 95% CI, 3.73-9.40). Conclusions: In 2017-2018, HTP use was still limited in Europe among the general population; however, the dual use of these products, their high use among younger generations, and the interest of non-smokers in these products are worrying and indicate the need for close monitoring in terms of prevalence and the characteristics of users.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A portable, low-cost eye tracking system for predicting visual attention during meal ingestion

  • Cia Alonso, Izaskun
  • Elizaran Mendarte, Amaia
  • Garde Lecumberri, Gonzalo
  • Cabeza Laguna, Rafael
  • Almiron-Roig, Eva
  • Villanueva Larre, Arantxa
Obesity is a pressing public health challenge affecting physical and mental health. Understanding the cognitive and socio-economic factors that influence eating behaviors is essential for effective interventions. Visual attention is crucial in food choices, making it critical to study how individuals engage with food in real-life settings. However, current methodologies often rely on static images, limiting their ecological validity and real-world applicability, or are highly intrusive. This work offers a practical solution for tracking visual attention during real-life eating scenarios. We designed a tray with an integrated camera and a calibration pattern to remotely record volunteers during meal consumption. A convolutional neural network (CNN) was employed for the gaze tracking, utilizing a custom-built training database. Models without and with user calibration were provided. Results indicate an accuracy error of 5 cm, which improves to 2 cm with calibration, demonstrating our system's effectiveness in measuring visual attention in food psychology experiments., This research was supported by the Government of Navarra, Departamento de Universidad, Innovacion y Transformacion Digital (grant PC139-140, PORTIONS-4) . EA-R also received funding from the Centre for Nutrition Research, University of Navarra, Spain. The portion-control plate was kindly provided by Precise Portions LLC, Virginia, USA.Additional funding was provided by the Public University of Navarra and the Spanish Ministry of Science and Innovation under the project Challenges of Eye Tracking Off-the-Shelf (ChETOS) (reference PID2020-118014RB-I00) .