Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 45
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Detector block performance based on a monolithic LYSO crystal using a novel signal multiplexing method

  • González, A.
  • Martí, Rosana
  • Hernández Hernández, Liczandro
  • Aguilar-Talens, Albert
  • BARBERA BALLESTER, JULIO
  • CATRET MASCARELL, JUAN VICENTE
  • Cañizares-Ledo, Gabriel
  • Conde-Castellanos, Pablo Eloy
  • Lamprou, Efthymios
  • Martos Pedrosa, Francisco
  • Sánchez-Góez, Sebastián
  • F Sánchez
  • Vidal San Sebastian, Luis Fernando|||0000-0001-8852-8560
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • González Martínez, Antonio Javier
[EN] Organ dedicated PET devices provide improved imaging performance when compared to whole body systems. The present study summarizes the test carried out to study a new detector block designed for an organ dedicated PET system. This block includes three novel components namely the scintillator geometry and a retroreflector layer coupled to the entrance face, the photosensor and the readout electronics. We used arrays of 12 x 12 SiPM photosensors with 3 x 3 mm(2) active area each and a pitch of 4.2 mm. We are proposing a new readout electronics that permits to reduce the 12 row and columns signals to only 8 without significant detector performance degradation. This approach also allows for resolving radioactive sources in the whole volume of the proposed crystal, significantly reducing the edge effect that typically rejects these events. An overall spatial resolution of about 1.8 mm FWHM is obtained for the whole scintillation volume, with an average energy resolution of 13% FWHM and a photon depth of interaction resolution (FWHM) of 3.7 mm. (C) 2018 Elsevier B.V. All rights reserved., This work was supported by the Spanish Ministerio de Economía, Industria y Competitividad under Grant Nos. FIS2014-62341-EXP and TEC2016-79884-C2-1-R. This project has also received funding from the European Union s Horizon 2020 research and innovation programme under grant agreement No. 711323. This project has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (grant agreement No. 695536).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative Analysis of Data Acquisition Setups for Fast Timing in ToF-PET Applications

  • Latella, Riccardo|||0000-0002-5044-9557
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Lecoq, Paul
  • Gonzalez, Antonio J.
  • Konstantinou, Georgios
[EN] The signal-to-noise ratio in positron emission tomography (PET) improves with precise timing resolution. PET systems enabling the capability of time-of-flight (ToF) are nowadays available. This study assesses various data configurations, comparing the obtained timing performances applicable to time-of-flight positron emission tomography (ToF-PET) systems. Different readout configurations were evaluated together with silicon photomultipliers (SiPMs) photosensors from the Fondazione Bruno Kessler (FBK), with and without the so-called metal trench (MT) technology. The tests were carried out with scintillation crystals of 3x3x5 mm(3) (LYSO:Ce,Ca) from SIPAT. Two onboard FPGA-based systems, namely, the Felix time-to-digital converter (TDC) from Tediel S.r.l. and the ASIC-based FastIC from the University of Barcelona, along with custom-made high-frequency electronics (CM-HF), were compared. Considering only photopeak events, the best-coincidence timing resolution (CTR) results obtained were 71 ps with the MT SiPMs. This result worsened to 88 ps with the old version of the same device that does not include the MT technology (called HD). The results demonstrate substantial CTR improvements when MT SiPMs were used across the different scenarios, resulting in a timing improvement in the 10 to 45-ps range compared to HD SiPMs. Notably, the Felix TDC achieved sub-100-ps timing results, emphasizing the potential of FPGA technology in ToF-PET applications. Moreover, the fully passive version of the CM-HF connected to the MT SiPMs shows only a degradation of 8-ps difference compared to the version using amplifiers. The novel MT-type SiPMs promise superior timing performance, enhancing accuracy and efficiency in PET imaging systems., This work was supported in part by the frame of the ERC Advanced Grant TICAL under Grant 338953 PI (P. Lecoq), and the related Prof-of-Concept Project ULTIMA under Grant 680552, both funded by the European Commission; and in part by the European Research Council (ERC) through the European Union's Horizon 2020 Research and Innovation Program under Grant 695536.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

PET detector block with accurate 4D capabilities

  • Lamprou, Efthymios
  • Aguilar -Talens, Albert
  • Gonzalez-Montoro, Andrea
  • Cañizares-Ledo, Gabriel
  • Iranzo-Egea, Sofía
  • Hernández Hernández, Liczandro
  • Conde-Castellanos, Pablo Eloy
  • Sánchez-Góez, Sebastián
  • Monzó Ferrer, José María|||0000-0001-6554-3231
  • Vidal San Sebastian, Luis Fernando|||0000-0001-8852-8560
  • F Sánchez
  • González Martínez, Antonio Javier
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] In this contribution, large SiPM arrays (8 x 8 elements of 6 x 6 mm(2) each) are processed with an ASIC-based readout and coupled to a monolithic LYSO crystal to explore their potential use for TOF-PET applications. The aim of this work is to study the integration of this technology in the development of clinical PET systems reaching sub-300 ps coincidence resolving time (CRT). The SiPM and readout electronics have been evaluated first, using a small size 1.6 mm (6 mm height) crystal array (32 x 32 elements). All pixels were well resolved and they exhibited an energy resolution of about 20% (using Time-over-Threshold methods) for the 511 keV photons. Several parameters have been scanned to achieve the optimum readout system performance, obtaining a CRT as good as 330 +/- 5 ps FWHM. When using a black-painted monolithic block, the spatial resolution was measured to be on average 2.6 +/- 0.5 mm, without correcting for the source size. Energy resolution appears to be slightly above 20%. CRT measurements with the monolithic crystal detector were also carried out. Preliminary results as well as calibration methods specifically designed to improve timing performance, are being analyzed in the present manuscript., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement No 695536). It has also been supported by the Spanish Ministerio de Economia, Industria y Competitividad under Grants No. FIS2014-62341-EXP and TEC2016-79884-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Validation of photon collimation techniques for monolithic PET detector calibration.

  • Gonzalez-Montoro, Andrea
  • Pierce, Larry A.
  • Hunter, William C. J.
  • Miyaoka, Robert S.
  • González Martínez, Antonio Javier
[EN] Monolithic-based positron emission tomography (PET) detectors have become an attractive alternative to traditional pixelated scintillator modules. One of the main limiting factors to further expand the use of the monolithic approach in commercial PET scanners is the requirement of more complex calibration setups than for their pixelated counterparts. These calibration procedures are usually based on hardware-collimation methods in which a physically collimated beam source is moved across the front face of the scintillator. These procedures require the use of manifold hardware setups and are time consuming, especially when dealing with systems composed of many detector modules. To reduce the mechanical complexity and long acquisition times required to obtain calibration datasets when using monolithic-based detectors, we have validated in this work the recently proposed method of using software-collimated calibration data for monolithic PET detectors. software-collimated methods require less hardware, are easier to implement, and have the potential to be used in an assembled PET scanner. We are evaluating a defined bias estimator and the overall detector spatial resolution using data obtained with the two different collimation techniques. Results showed bias behavior and spatial resolution discrepancies as small as 4.9% between the two datasets for a monolithic crystal with dimensions of 50 x 50 x 8 mm(3). These results demonstrate that software-collimated data in combination with accurate positioning algorithms promises to be competitive against traditional hardware-collimation procedures. Finally, we have explored and confirmed the use of software-collimated data for the calibration step using two procedures, the PC3 method (calibrated data is shown) and Voronoi diagrams., This work was supported in part by NIH under Grant R01 CA136569, Grant R01 EB002117-04, and Grant 1R41CA180191-01; in part by the University of Washington as a part of the VISIT Program performed at the Department of Radiology; and in part by the European Research Council through the European Union's Horizon 2020 Research and Innovation Program under Grant 695536.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Detector Characterization of a High-Resolution Ring for PET Imaging of Mice Heads with sub-200 ps TOF

  • Valladares de-Francisco, Celia
  • Barrio-Toala, John|||0000-0001-5181-2146
  • Cucarella-Melo, Neus
  • Freire-López-Fando, Marta
  • Vidal San Sebastian, Luis Fernando|||0000-0001-8852-8560
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • González Martínez, Antonio Javier
[EN] Positron emission tomography (PET) stands out as a highly specific molecular imaging technique. However, its detection sensitivity remains a challenge. The implementation of time-of-flight (TOF) PET technology enhances sensitivity by precisely measuring the time lapse between the annihilation photons. Moreover, by characterizing scattered (Compton) events, the effective sensitivity of PET imaging might significantly be enhanced. In this work, we present the scatter subsystem of a 2 layers preclinical TOF-PET scanner for mice head imaging. The scatter subsystem is composed of eight identical modules based on analog silicon photomultipliers (SiPMs) coupled to crystal arrays of 24x24 LYSO pixels with 0.95 mm x0 .95 mm x 3 mm dimensions. The system has 29-mm bore and 50.8-mm axial length. An average CTR of 192 +/- 1 ps was obtained for the whole subsystem at the photopeak energy range after energy and timing corrections, and CTR values as good as 155 ps were found for some individual pixels. The transit time spread at the SiPM level was also studied and corrected, achieving a mean value of 41 ps of maximum time difference at the sensor corners with respect to the center. Voronoi diagrams were implemented to correct for position decoding., This work was supported in part by the European Research Council (ERC) through the European Union's Horizon 2020 Research and Innovation Program (4D-PET) under Agreement 695536,and in part by the Open Access Charge: CRUE-Universitat Politecnicade Valencia. The work of John Barrio was supported by the Generalitat Valenciana and European Social Fund under Grant APOSTD/2021/033. The work of Marta Freire was supported by the Generalitat Valenciana and European Social Fund under Grant ACIF/2019/112.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Organ-Dedicated Molecular Imaging Systems

  • González Martínez, Antonio Javier
  • F Sánchez
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] In this review, we will cover both clinical and technical aspects of the advantages and disadvantages of organ specific (dedicated) molecular imaging (MI) systems, namely positron emission tomography (PET) and single photon emission computed tomography, including gamma cameras. This review will start with the introduction to the organ-dedicated MI systems. Thereafter, we will describe the differences and their advantages/disadvantages when compared with the standard large size scanners. We will review time evolution of dedicated systems, from first attempts to current scanners, and the ones that ended in clinical use. We will review later the state of the art of these systems for different organs, namely: breast, brain, heart, and prostate. We will also present the advantages offered by these systems as a function of the special application or field, such as in surgery, therapy assistance and assessment, etc. Their technological evolution will be introduced for each organ-based imager. Some of the advantages of dedicated devices are: higher sensitivity by placing the detectors closer to the organ, improved spatial resolution, better image contrast recovery (by reducing the noise from other organs), and also lower cost. Designing a complete ring-shaped dedicated PET scanner is sometimes difficult and limited angle tomography systems are preferable as they have more flexibility in placing the detectors around the body/organ. Examples of these geometries will be presented for breast, prostate and heart imaging. Recently achievable excellent time of flight capabilities below 300-ps full width at half of the maximum reduce significantly the impact of missing angles on the reconstructed images., This work was supported in part by the European Research Council through the European Union's Horizon 2020 Research and Innovation Program under Grant 695536, in part by the EU through the FP7 Program under Grant 603002, and in part by the Spanish Ministerio de Economia, Industria y Competitividad through PROSPET (DTS15/00152) funded by the Ministerio de Economia y Competitividad under Grant TEC2016-79884-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Calibration of Gamma Ray Impacts in Monolithic-Based Detectors Using Voronoi Diagrams

  • González Martínez, Antonio Javier
  • Freire-López-Fando, Marta
  • F Sánchez
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Gonzalez-Montoro, Andrea
[EN] Molecular imaging systems, such as positron emission tomography (PET), use detectors providing energy and a 3-D interaction position of a gamma ray within a scintillation block. Monolithic crystals are becoming an alternative to crystal arrays in PET. However, calibration processes are required to correct for nonuniformities, mainly produced by the truncation of the scintillation light distribution at the edges. We propose a calibration method based on the Voronoi diagrams. We have used $50 \times 50 \times 15$ mm(3) LYSO blocks coupled to a $12\times 12$ SiPMs array. We have first studied two different interpolation algorithms: 1) weighted average method (WAM) and 2) natural neighbor (NN). We have compared them with an existing calibration based on 1-D monomials. Here, the crystal was laterally black painted and a retroreflector (RR) layer added to the entrance face. The NN exhibited the best results in terms of XY impact position, depth of Interaction, and energy, allowing us to calibrate the whole scintillation volume. Later, the NN interpolation has been tested against different crystal surface treatments, allowing always to correct edge effects. Best energy resolutions were observed when using the reflective layers (12%-14%). However, better linearity was observed with the treatments using black paint. In particular, we obtained the best overall performance when lateral black paint is combined with the RR., This work was supported in part by the European Research Council through the European Union's Horizon 2020 Research and Innovation Program under Grant 695536, and in part by the Spanish Ministerio de Economia, Industria y Competitividad under Grant TEC2016-79884-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exploiting Cherenkov Radiation With BGO-Based Metascintillators

  • Latella, Riccardo|||0000-0002-5044-9557
  • González Martínez, Antonio Javier
  • Kovylina-Zabyako, Miroslavna
  • Griol Barres, Amadeu
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Lecoq, Paul
  • Bonifacio, Daniel A. B.
  • Konstantinou, Georgios
[EN] In time-of-flight positron emission tomography (TOF-PET), the timing capabilities of the scintillation-based detector play an important role. An approach for fast timing is using the so-called metascintillators, which combine two materials leading to the synergistic blending of their favorable characteristics. An added effect for BGO-based metascintillators is taking advantage of better transportation of Cherenkov photons through UV-transparent materials such as plastic (type EJ232). To prove this, we use an optimized Coincidence Time Resolution (CTR) setup based on electronic boards with two output signals (timing and energy) and near-ultraviolet (NUV) and vacuum-ultraviolet (VUV) silicon photomultipliers (SiPMs) from Fondazione Bruno Kessler (FBK), along with different coupling materials. As a reference detector, we employed a 3x3x5-mm(3) LYSO:Ce,Ca crystal pixel coupled with optical grease to an NUV-HD SiPM. The evaluation is based on low-threshold rise time, energy and time of arrival of event datasets. Timing results of a BGO/EJ232 3x3x15-mm(3) metapixel show detector time resolutions (DTRs) of 159 ps for the full photopeak. We demonstrate the possibility of event discrimination using subsets with different DTR from the rise time distributions (RTDs). Finally, we present the synergistic capability of metascintillators to enhance Cherenkov photons detection when used along with VUV-sensitive SiPMs., This work was supported in part by the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program (4D-PET) under Grant 695536, and in part by the Brazilian Funding Agency Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) under Grant 202378/2020-9.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Timing evaluation of a PET detector block based on semi-monolithic LYSO crystals

  • Cucarella-Melo, Neus
  • Barrio-Toala, John|||0000-0001-5181-2146
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • González Martínez, Antonio Javier
  • Lamprou, Efthymios
  • Valladares, Celia
[EN] Purpose Detectors for positron emission tomography (PET) typically use two types of scintillation crystals, pixelated or monolithic. A variant of these types of scintillators are the so-called semi-monolithic crystals. They consist of a monolithic crystal segmented in one direction in pieces called slabs. These scintillators have the potential to successfully combine the benefits of pixelated and monolithic configurations, providing good timing and spatial resolutions as well as the capacity to decode the depth of interaction (DOI) information. In this work, the timing performance of a detector based on semi-monolithic crystals was studied in depth. The energy response was also evaluated. Methods The semi-monolithic detector consists of 1 x 24 LYSO slabs of 25.4 x 12 x 0.95 mm(3) each. The bottom surface of the slabs is coupled to an array of 8 x 8 silicon photomultipliers (SiPMs) of 3 x 3 mm(2) active area, 50 mu m cell size and 3.2 mm pitch. The 64 output signals were independently readout by the TOFPET2 ASIC. In order to achieve the best coincidence time resolution (CTR), four different time walk corrections were tested. Additional work investigated the best method of combining the timestamps belonging to the same event. Results The resolvability of the slabs in the measured flood maps improves with the thickness of a light guide placed in between the scintillators and photosensors. The energy resolution does not change significantly with values as good as 13.7%. Regarding the CTR, values of 335.8, 363, 369.8, and 402.5 ps have been obtained for the whole detector for no light guide, 0.5, 1.0, and 1.5 mm thickness light guide cases, respectively. These values further improve to 276.1, 302.6, 305.6 and 336.2 ps, respectively, when energy-weighted averaging of timestamps is applied. Conclusions We have shown both an excellent timing resolution and good energy resolution for a PET detector based on semi-monolithic crystals. The use of light guides of different thicknesses does not significantly affect the energy resolution of the whole detector, but the timing capabilities slightly worsen with the increasing thickness of the light guide., European Research Council (ERC), Grant/Award Number: 695536; USA National Institutes of Health (NIH), Grant/Award Number: 1R01EB029450-01
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Pilot performance of a dedicated prostate PET suitable for diagnosis and biopsy guidance

  • Cañizares-Ledo, Gabriel
  • Gonzalez-Montoro, Andrea
  • Lamprou, Efthymios
  • Barrio, John
  • Hernandez, Liczandro
  • Torres, Irene
  • Sopena, Pablo
  • Vera-Donoso, Cesar D.
  • Bello, Pilar
  • Barbera, Julio
  • Freire-López-Fando, Marta
  • F Sánchez
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Moliner Martínez, Laura
  • Vidal San Sebastian, Luis Fernando|||0000-0001-8852-8560
  • González Martínez, Antonio Javier
[EN] Background: Prostate cancer (PCa) represents one of the most common types of cancers facing the male population. Nowadays, to confirm PCa, systematic or multiparametric MRI-targeted transrectal or transperineal biopsies of the prostate are required. However, due to the lack of an accurate imaging technique capable to precisely locate cancerous cells in the prostate, ultrasound biopsies sample random parts of the prostate and, therefore, it is possible to miss regions where those cancerous cells are present. In spite of the improvement with multiparametric MRI, the low reproducibility of its reading undermines the specificity of the method. Recent development of prostatespecific radiotracers has grown the interest on using positron emission tomography (PET) scanners for this purpose, but technological improvements are still required (current scanners have resolutions in the range of 4¿5 mm). Results: The main goal of this work is to improve state-of-the-art PCa imaging and diagnosis. We have focused our efforts on the design of a novel prostate-dedicated PET scanner, named ProsPET. This system has small scanner dimensions defined by a ring of just 41 cm inner diameter. In this work, we report the design, implementation, and evaluation (both through simulations and real data) of the ProsPET scanner. We have been able to achieve < 2 mm resolution in reconstructed images and high sensitivity. In addition, we have included a comparison with the Philips Gemini-TF scanner, which is used for routine imaging of PCa patients. The ProsPET exhibits better contrast, especially for rod sizes as small as 4.5 mm in diameter. Finally, we also show the first reconstructed image of a PCa patient acquired with the ProsPET. Conclusions: We have designed and built a prostate specific PET system, with a small footprint and improved spatial resolution when compared to conventional whole-body PET scanners. The gamma ray impact within each detector block includes accurate DOI determination, correcting for the parallax error. The potential role of combined organdedicated prostate-specific membrane antigen (PSMA) PET and ultrasound devices, as a prebiopsy diagnostic tool, could be used to guide sampling of the most aggressive sites in the prostate., The work presented in this article has been partially funded by a research grant from the regional government of the Comunitat Valenciana (Spain), co-funded by the European Union ERDF funds (European Regional Development Fund) of the Comunitat Valenciana 2014-2020, with reference IDIFEDER/2018/032 (High-Performance Algorithms for the Modelling, Simulation and early Detection of diseases in Personalized Medicine). This project has also received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement No 695536). It has also been supported by the EU Grant 603002 under the FP7 program and by the Spanish Ministerio de Economia, Industria y Competitividad under Grant e and through PROSPET (DTS15/00152) funded by the Ministerio de Economia y Competitividad.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Metascintillators: New Results for TOF-PET Applications

  • Lecoq, Paul
  • Latella, Riccardo|||0000-0002-5044-9557
  • Moliner Martínez, Laura
  • Barrio-Toala, John|||0000-0001-5181-2146
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • González Martínez, Antonio Javier
  • Konstantinou, Georgios
  • Nuyts, Johan
  • Zhang, Lei
[EN] We report on the progress on a first generation of realistic size metascintillators for time-of-flight PET. These heterostructures combine dense LYSO or BGO plates, interleaved with fast scintillator layers producing a bunch of prompt photons from the energy leakage of the recoil photoelectric electron. From a Geant4 simulation of the energy sharing distribution between the dense and the fast scintillator on 42 LYSO-based and 42 BGO-based configurations, a detailed study of the timing performance has been performed on a selection of the most promising 12 LYSO-based and 14 BGO-based metascintillators. A Monte Carlo simulation was first performed to extrapolate from direct measurements of the performance of the metascintillator components, the detector time resolution (DTR), and sensitivity on the basis of the simulated amount of energy leakage to the fast scintillator. An analytic algorithm was then applied to determine an equivalent coincidence time resolution (CTR) from the random association of the DTR distributions from two metapixels in coincidence. This equivalent CTR is calculated in order to obtain the same variance in the reconstructed image as the combination of the DTR distributions of 2 metapixels. Preliminary results confirm that with these simple and still nonoptimized configurations, an equivalent CTR of 150 ps for BGO-based and 140 ps for LYSO-based metapixels of realistic size can be obtained, This work was supported in part by the European Research Council (ERC) through the European Union's Horizon 2020 Research and Innovation Programme under Grant 695536. The work of P. Lecoq was supported in part by ERC Advanced under Grant TICAL 338953, and in part by the related Proof-of-Concept Project under Grant ULTIMA 680552, both funded by the European Commission.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A proof-of-concept of cross-luminescent metascintillators: testing results on a BGO: BaF2metapixel

  • Konstantinou, G.
  • Zhang, L.
  • Latella, Riccardo|||0000-0002-5044-9557
  • Moliner Martínez, Laura
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • González Martínez, Antonio Javier
  • Lecoq, Paul
[EN] Objective: Time-of-flight positron emission tomography (PET)is the next frontier in improving the effective sensitivity. To achieve superior timing for time-of-flight PET, combined with high detection efficiency and cost-effectiveness, we have studied the applicability of BaF2 in metascintillators driven by the timing of cross-luminescence photon production. Approach: Based on previous simulation studies of energy sharing and analytic multi-exponential scintillation pulse, as well as sensitivity characteristics, we have experimentally tested a pixel of 3 × 3 × 15 mm3 based on 300 ¿m BGO and 300 ¿m BaF2 layers. To harness the deep ultraviolet cross-luminescent light component, which carries improved timing, we use the FBK VUV SiPM. Metascintillator energy sharing is addressed through a double integration approach. Main results: We reach an energy resolution of 22%, comparable to an 18% resolution of simple BGO pixels using the same readout, through the optimized use of the integrals of the metascintillator pulse in energy sharing calculation. We measure the energy sharing extent of each pulse with a resolution of 25% and demonstrate that experimental and simulation results agree well. Based on the energy sharing, a timewalk correction is applied, exhibiting significant improvements for both the coincidence time resolution (CTR) and the shape of the timing histogram. We reach 242 ps CTR for the entire photopeak, while for a subset of 13% of the most shared events, the CTR value improves to 108 ps, comparable to the 3 × 3 × 5 mm3 LYSO:Ce:Ca reference crystal. Significance: While we are considering different ways to improve further these results, this proof-ofconcept demonstrates the applicability of cross-luminescence for metascintillator designs through the application of VUV compatible SiPM coupling, and easily implementable digital algorithms. This is the first test of BaF2-based metascintillators of sufficient stoppng power to be included in a PET scanner, demonstrating the industrial applicability of such cross-luminescent metascintillators., Part of the research presented in this manuscript was funded by the ERC grant Innovative PET scanner for dynamic imaging, agreement no 695536. The concept presented in this manuscript was based on research first developed within the TICAL: 4D total absorptionTime Imaging CALorimeter ERC grant, agreement no 338953. The authors would like to acknowledge the support of Dr. Daniel Bonifacio of IPEN, Sao Paolo, Brazil.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In-depth evaluation of TOF-PET detectors based on crystal arrays and the TOFPET2 ASIC

  • Lamprou, Efthymios
  • F Sánchez
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • González Martínez, Antonio Javier
[EN] In recent years high efforts have been devoted to enhance spatial and temporal resolutions of PET detectors. However, accurately combining these two main features is, in most of the cases, challenging. Typically, a compromise has to be made between the number of readout channels, scintillator type and size, and photosensors arrangement if aiming for a good system performance, while keeping a moderate cost. In this work, we have studied several detector configurations for PET based on a set of 8x8 Silicon Photomultiplier (SiPMs) of 3x3 mm(2) active area, and LYSO crystal arrays with different pixel sizes. An exhaustive evaluation in terms of spatial, energy and timing resolution was made for all detector configurations. In some cases, when using pixel sizes different than SiPM active area, a significant amount of scintillation light may spread among several SiPMs. Therefore, we made use of a calibration method considering the different SiPM timing contributions. Best Detector Time Resolution (DTR) of 156 ps FWHM was measured when using 3x3 mm(2) crystal pixels directly coupled to the 3x3 mm(2) SiPMs. However, when using 1.5 mm crystal pixels with the same photosensor array, although we could clearly resolve all crystal pixels, an average DTR of 250 ps FWHM was achieved. We also shed light in this work on the timing dependency of the crystal pixel and photosensor alignment., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement No. 695536) and by the Spanish Ministerio de Economia, Industria y Competitividad under Grant TEC2016-79884-C2-1-R. The first author has also been supported by Generalitat Valenciana, Spain under grant agreement GRISOLIAP-2018-026.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simulation Study of a Frame-Based Motion Correction Algorithm for Positron Emission Imaging

  • Espinós-Morató, Héctor
  • Cascales-Picó, David
  • Vergara, Marina
  • Hernández-Martínez, Ángel
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Rodríguez-Álvarez, M.J.|||0000-0001-8333-8792
[EN] Positron emission tomography (PET) is a functional non-invasive imaging modality that uses radioactive substances (radiotracers) to measure changes in metabolic processes. Advances in scanner technology and data acquisition in the last decade have led to the development of more sophisticated PET devices with good spatial resolution (1¿3 mm of full width at half maximum (FWHM)). However, there are involuntary motions produced by the patient inside the scanner that lead to image degradation and potentially to a misdiagnosis. The adverse effect of the motion in the reconstructed image increases as the spatial resolution of the current scanners continues improving. In order to correct this effect, motion correction techniques are becoming increasingly popular and further studied. This work presents a simulation study of an image motion correction using a frame-based algorithm. The method is able to cut the acquired data from the scanner in frames, taking into account the size of the object of study. This approach allows working with low statistical information without losing image quality. The frames are later registered using spatio-temporal registration developed in a multi-level way. To validate these results, several performance tests are applied to a set of simulated moving phantoms. The results obtained show that the method minimizes the intra-frame motion, improves the signal intensity over the background in comparison with other literature methods, produces excellent values of similarity with the ground-truth (static) image and is able to find a limit in the patient-injected dose when some prior knowledge of the lesion is present., This research has been co-financed by the Spanish Government Grants TEC2016-79884-C2, PID2019-107790RB-C22, and PEJ2018-002230-A-AR; the Generalitat Valenciana GJIDI/2018/A/040l and the PTA2019-017113-1/AEI/10.13039/501100011033; the European Union through the European Regional Development Fund (ERDF); and the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 695536).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Building blocks of a multi-layer PET with time sequence photon interaction discrimination and double Compton camera

  • Ilisie, V.
  • Giménez-Alventosa, Vicent|||0000-0003-1646-6094
  • Moliner Martínez, Laura
  • F Sánchez
  • González Martínez, Antonio Javier
  • Rodríguez-Álvarez, M.J.|||0000-0001-8333-8792
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] Current PET detectors have a very low sensitivity, of the order of a few percent. One of the reasons is the fact that Compton interactions are rejected. If an event involves multiple Compton scattering and the total deposited energy lays within the photoelectric peak, then an energy-weighted centroid is the given output for the coordinates of the reconstructed interaction point. This introduces distortion in the final reconstructed image. The aim of our work is to prove that Compton events are a very rich source of additional information as one can improve the resolution of the detector and implicitly the final reconstructed image. This could be a real breakthrough for PET detector technology as one should be able to obtain better results with less patient radiation. Using a PET as a double Compton camera, by means of Compton cone matching i.e., Compton cones coming from the same event should be compatible, is applied to discard randoms, patient scattered events and also, to perform a correct matching among events with multiple coincidences. In order to fully benefit experimentally from Compton events using monolithic scintillators a multi-layer configuration is needed and a good time-of-flight resolution., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant Agreement No. 695536). This work was supported in part by the Spanish Government Grants TEC2016-79884-C2 and RTC-2016-5186-1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

2D feasibility study of joint reconstruction of attenuation and activity in limited angle TOF-PET

  • Vergara, Marina
  • Rezaei, Ahmadreza
  • Schramm, Georg
  • Nuyts, Johan
  • Rodríguez-Álvarez, M.J.|||0000-0001-8333-8792
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] Several research groups are studying organ-dedicated limited angle positron emission tomography (PET) systems to optimize performance-cost ratio, sensitivity, access to the patient, and/or flexibility. Often open systems are considered, typically consisting of two detector panels of various sizes. Such systems provide incomplete sampling due to limited angular coverage and/or truncation, which leads to artifacts in the reconstructed activity images. In addition, these organ-dedicated PET systems are usually stand-alone systems, and as a result, no attenuation information can be obtained from anatomical images acquired in the same imaging session. It has been shown that the use of time-of-flight (TOF) information reduces incomplete data artifacts and enables the joint estimation of the activity and the attenuation factors. In this work, we explore with simple 2-D simulations the performance and stability of a joint reconstruction algorithm, for imaging with a limited angle PET system. The reconstruction is based on the so-called maximum-likelihood attenuation correction factors (MLACF) algorithm and uses linear attenuation coefficients in a known-tissue-class region to obtain absolute quantification. Different panel sizes and different TOF resolutions are considered. The noise propagation is compared to that of MLEM reconstruction with exact attenuation correction (AC) for the same PET system. The results show that with good TOF resolution, images of good visual quality can be obtained. If also a good scatter correction can be implemented, quantitative PET imaging will be possible. Further research, in particular on scatter correction, is required., This work was supported in part by the European Research Council (ERC) through the European Unions Horizon 2020 Research and Innovation Program under Grant 695536; in part by the Research Foundation Flanders (FWO) under Project 12T7118N and Project G062220N; and in part by the NIH Project under Grant 1P41EB017183-01A1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simulation Study for Designing a Dedicated Cardiac TOF-PET System

  • Oliver-Gil, Sandra|||0000-0001-8258-3972
  • Moliner Martínez, Laura
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Rodríguez-Álvarez, M.J.|||0000-0001-8333-8792
  • Ilisie, V.
[EN] The development of dedicated positron emission tomography scanners is an active area of research, especially aiming at the improvement of lesion detection and in support of cancer treatment and management. Recently, dedicated Positron Emission Tomography (PET) systems with different configurations for specific organs have been developed for improving detection effectiveness. Open geometries are always subject to distortion and artifacts in the reconstructed images. Therefore, the aim of this work is to determine the optimal geometry for a novel cardiac PET system that will be developed by our team, and determine the time resolution needed to achieve reasonable image quality for the chosen geometry. The proposed geometries consist of 36 modules. These modules are arranged in two sets of two plates, each one with different configurations. We performed Monte Carlo simulations with different TOF resolutions, in order to test the image quality improvement in each case. Our results show, as expected, that increasing TOF resolution reduces distortion and artifact effects. We can conclude that a TOF resolution of the order of 200 ps is needed to reduce the artifacts, to acceptable levels, generated in the simulated cardiac-PET open geometries., This project has been co-financed by the Spanish Government Grants TEC2016-79884-C2 and RTC-2016-5186-1, by the European Union through the European Regional Development Fund (ERDF) and by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 695536). The work of V.I. was supported by the Generalitat Valenciana APOSTD/2019/086 fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simulation Study of Clinical PET Scanners With Different Geometries, Including TOF and DOI Capabilities.

  • Cañizares-Ledo, Gabriel
  • Lucero-Ruiz, Alejandro
  • Morera-Ballester, Constantino
  • Muñoz, Enrique
  • Jiménez-Serrano, Santiago|||0000-0003-2917-6053
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • González Martínez, Antonio Javier
[EN] Total Body Positron Emission Tomography (TB-PET) scanners provide high-quality images due to the large sensitivity. Our motivation is to design a TB-PET system with up to 70 cm axial coverage that mitigates the parallax error degradation by using a detector concept based on semi-monolithic LYSO crystals. Furthermore, this detector approach allows to simultaneously reach an accurate Coincidence Time Resolution (CTR) to enhance the image quality by means of Time of Flight (TOF) reconstruction algorithms. We have simulated and compared two Positron Emission Tomography (PET) prototypes with about 70 cm but a different number of detector rings (7 vs. 5). The NEMA NU 2 2018 protocol has been implemented. By correcting the parallax error with the Depth of Interaction (DOI) information, the spatial resolution remains homogeneous and below 3 mm in the entire Field of View (FOV), differently from designs based on pixelated crystals. The sensitivity reaches values of 58 and 115 cps/kBq, for the 5 and 7 rings configurations, respectively. The Noise Equivalent Count Rate (NECR) was found at 563 kcps/mL. This value is lower than other systems, most likely due to the requirement to process a larger number of channels to characterize the DOI. Percent contrasts obtained for two different phantoms are in general beyond 80% for the largest spheres, nearly 100% for the 7 rings configuration once TOF is applied during the reconstruction process. In conclusion, although the sensitivity and NECR results for the 5-rings configuration are lower compared to the 7-rings approach, its overall performance is enhanced by the addition of TOF and parallax error correction, improving that of conventional Whole Body PET scanners (axial length: 20 ¿ 30 cm) in terms of image quality., This work was supported in part by the Imagen Molecular de Alta Sensibilidad Project Launched by the Conselleria de Sanitat Universal i Salut Publica of the Goverment of Valencia Region, announced in the BOE 328, 28 December 2020, cofounded at 50% by the ERDF, and in part by the European Research Council through the European Union s Horizon 2020 Research and Innovation Program under Agreement 695536.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Semi-Monolithic Meta-Scintillator Simulation Proof-of-Concept, Combining Accurate DOI and TOF

  • Konstantinou, Georgios
  • Zhang, Lei
  • Bonifacio, Daniel
  • Latella, Riccardo|||0000-0002-5044-9557
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • González Martínez, Antonio Javier
  • Lecoq, Paul
[EN] In this study, we propose and examine a unique semimonolithic metascintillator (SMMS) detector design, where slow scintillators (BGO or LYSO) are split into thin slabs and read by an array of SiPM, offering depth-of-interaction (DOI) information. These are alternated with thin segmented fast scintillators (plastic EJ232 or EJ232Q), also read by single SiPMs, which provides pixel-level coincidence time resolution (CTR). The structure combines layers of slow scintillators of size 0.3 x 25.5 x (15 or 24) mm(3) with fast scintillators of size 0.1 x 3.1 x (15 or 24) mm(3). We use a Monte Carlo Gate simulation to gauge this novel semimonolithic detector's performance. We found that the time resolution of SMMS is comparable to pixelated metascintillator designs with the same materials. For example, a 15-mm deep LYSO-based SMMS yielded a CTR of 121 ps before applying timewalk correction (after correction, 107-ps CTR). The equivalent BGO-based SMMS presented a CTR of 241 ps, which is a 15% divergence from metascintillator pixel experimental findings from previous works. We also applied neural networks to the photon distributions and timestamps recorded at the SiPM array, following guidelines on semimonolithic detectors. This led to determining the DOI with less than 3-mm precision and a confidence level of 0.85 in the best case, plus more than 2 standard deviations accuracy in reconstructing energy sharing and interaction energy. In summary, neural network prediction capabilities outperform standard energy calculation methods or any analytical approach on energy sharing, thanks to the improved understanding of photon distribution., This work was supported in part by the European Research Council in the framework of the ERC Advanced Grant TICAL under Grant 338953, and in part by the European Research Council (ERC) through the European Union s Horizon 2020 Research and Innovation Program (4DPET) under Grant 695536.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Development and Performance Evaluation of High Resolution TOF-PET Detectors Suitable for Novel PET Scanners

  • Lamprou, Efthymios
[ES] La Tomografía por Emisión de Positrones (PET) es una de las técnicas más importantes en la medicina de diagnóstico actual y la más representativa en el campo de la Imagen Molecular. Esta modalidad de imagen es capaz de producir información funcional única, que permite la visualización en detalle, cuantificación y conocimiento de una variedad de enfermedades y patologías. Áreas como la oncología, neurología o la cardiología, entre otras, se han beneficiado en gran medida de esta técnica. A pesar de que un elevado número de avances han ocurrido durante el desarrollo del PET, existen otros que son de gran interés para futuras investigaciones. Uno de los principales pilares actualmente en PET, tanto en investigación como en desarrollo, es la obtención de la información del tiempo de vuelo (TOF) de los rayos gamma detectados. Cuando esto ocurre, aumenta la sensibilidad efectiva del PET, mejorando la calidad señal-ruido de las imágenes. Sin embargo, la obtención precisa de la marca temporal de los rayos gamma es un reto que requiere, además de técnicas y métodos específicos, compromisos entre coste y rendimiento. Una de las características que siempre se ve afectada es la resolución espacial. Como discutiremos, la resolución espacial está directamente relacionada con el tipo de centellador y, por lo tanto, con el coste del sistema y su complejidad. En esta tesis, motivada por los conocidos beneficios en imagen clínica de una medida precisa del tiempo y de la posición de los rayos gamma, proponemos configuraciones de detectores TOF- PET novedosos capaces de proveer de ambas características. Sugerimos el uso de lo que se conoce como métodos de "light-sharing", tanto basado en cristales monolíticos como pixelados de tamaño diferente al del fotosensor. Estas propuestas hacen que la resolución espacial sea muy alta. Sin embargo, sus capacidades temporales han sido muy poco abordadas hasta ahora. En esta tesis, a través de varios artículos revisados, pretendemos mostrar los retos encontrados en esta dirección, proponer determinadas configuraciones y, además, indagar en los límites temporales de éstas. Hemos puesto un gran énfasis en estudiar y analizar las distribuciones de la luz centellante, así como su impacto en la determinación temporal. Hasta nuestro conocimiento, este es el primer trabajo en el que se estudia la relación de la determinación temporal y la distribución de luz de centelleo, en particular usando SiPM analógicos y ASICs. Esperamos que esta tesis motive y permita otros muchos trabajos orientados en nuevos diseños, útiles para instrumentación PET, así como referencia para otros trabajos. Esta tesis esta organizada como se describe a continuación. Hay una introducción compuesta por tres capítulos donde se resumen los conocimientos sobre imagen PET, y especialmente aquellos relacionados con la técnica TOF-PET. Algunos trabajos recientes, pero aún no publicados se muestran también, con el objetivo de corroborar ciertas ideas. En la segunda parte se incluyen las cuatro contribuciones que el candidato sugiere para el compendio de artículos., [CA] La Tomografia per Emissió de Positrons (PET) és una de les tècniques més importants en la medicina de diagnòstic actual i la més representativa en el camp de la Imatge Molecular. Esta modalitat d'imatge és capaç de produir informació funcional única, que permet la visualització en detall, quantificació i coneixement d'una varietat de malalties i patologies. Àrees com l'oncologia, neurologia o la cardiologia, entre altres, s'han beneficiat en gran manera d'aquesta tècnica. Tot i que un elevat nombre d'avanços han ocorregut durant el desenvolupament del PET, hi ha altres que són de gran interés per a futures investigacions. Un dels principals pilars actuals en PET, tant en investigació com en desenvolupament, és l'obtenció de la informació del temps de vol (TOF en anglès) dels raigs gamma detectats. Quan açò ocorre, augmenta la sensibilitat efectiva del PET, millorant la qualitat senyal-soroll de les imatges. No obstant això, l'obtenció precisa de la marca temporal dels raigs gamma és un repte que requerix, a més de tècniques i mètodes específics, compromisos entre cost i rendiment. Una de les característiques que sempre es veu afectada és la resolució espacial. Com discutirem, la resolució espacial està directament relacionada amb el tipus de centellador, i per tant, amb el cost del sistema i la seua complexitat. En aquesta tesi, motivada pels coneguts beneficis en imatge clínica d'una mesura precisa del temps i de la posició dels raigs gamma, proposem nouves configuracions de detectors TOF-PET capaços de proveir d'ambduess característiques. Suggerim l'ús del que es coneix com a mètodes de "light-sharing", tant basat en cristalls monolítics com pixelats de diferent tamany del fotosensor. Aquestes propostes fan que la resolució espacial siga molt alta. No obstant això, les seues capacitats temporals han sigut molt poc abordades fins ara. En aquesta tesi, a través de diversos articles revisats, pretenem mostrar els reptes trobats en aquesta direcció, proposar determinades configuracions i, a més, indagar en els límits temporals d'aquestes. Hem posat un gran èmfasi a estudiar i analitzar les distribucions de la llum centellejant, així com el seu impacte en la determinació temporal. Fins al nostre coneixement, aquest és el primer treball en què s'estudia la relació de la determinació temporal i la distribució de llum de centelleig, en particular utilitzant SiPM analògics i ASICs. Esperem que aquesta tesi motive i permeta molts altres treballs orientats en nous dissenys, útils per a instrumentació PET, així com referència per a altres treballs. Aquesta tesi esta organitzada com es descriu a continuació. Hi ha una introducció composta per tres capítols on es resumeixen els coneixements sobre imatge PET i, especialmente, aquells relacionats amb la tècnica TOF-PET. Alguns treballs recents, però encara no publicats es mostren també, amb l'objectiu de corroborar certes idees. La segona part de la tesi conté els quatre articles revisats que el candidat suggereix., [EN] Positron Emission Tomography (PET) is one of the greatest tools of modern diagnostic medicine and the most representative in the field of molecular imaging. This imaging modality, is capable of providing a unique type of functional information which permits a deep visualization, quantification and understanding of a variety of diseases and pathologies. Areas like oncology, neurology, or cardiology, among others, have been well benefited by this technique. Although numerous important advances have already been achieved in PET, some other individual aspects still seem to have a great potential for further investigation. One of the main trends in modern PET research and development, is based in the extrapolation of the Time- Of-Flight (TOF) information from the gamma-ray detectors. In such case, an increase in the effective sensitivity of PET is accomplished, resulting in an improved image signal-to-noise ratio. However, the direction towards a precise decoding of the photons time arrival is a challenging task that requires, besides specific approaches and techniques, tradeoffs between cost and performance. A performance characteristic very habitually compromised in TOF-PET detector configurations is the spatial resolution. As it will be discussed, this feature is directly related to the scintillation materials and types, and consequently, with system cost and complexity. In this thesis, motivated by the well-known benefits in clinical imaging of a precise time and spatial resolution, we propose novel TOF-PET detector configurations capable of inferring both characteristics. Our suggestions are based in light sharing approaches, either using monolithic detectors or crystal arrays with different pixel-to-photosensor sizes. These approaches, make it possible to reach a precise impact position determination. However, their TOF capabilities have not yet been explored in depth. In the present thesis, through a series of peer-reviewed publications we attempt to demonstrate the challenges encountered in these kinds of configurations, propose specific approaches improving their performance and eventually reveal their limits in terms of timing. High emphasis is given in analyzing and studying the scintillation light distributions and their impact to the timing determination. To the best of our knowledge, this is one of the first works in which such detailed study of the relation between light distribution and timing capabilities is carried out, especially when using analog SiPMs and ASICs. Hopefully, this thesis will motivate and enable many other novel design concepts, useful in PET instrumentation as well as it will serve as a helpful reference for similar attempts. The present PhD thesis is organized as follows. There is an introduction part composed by three detailed sections. We attempt to summarize here some of the knowledge related to PET imaging and especially with the technique of TOF-PET. Some very recent but still unpublished results are also presented and included in this part, aiming to support statements and theories. The second part of this thesis lists the four peer-reviewed papers that the candidate is including., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No 695536). It has also been supported by the Spanish Ministerio de Economía, Industria y Competitividad under Grants No. FIS2014-62341-EXP and TEC2016-79884-C2-1-R. Efthymios Lamprou has also been supported by Generalitat Valenciana under grant agreement GRISOLIAP-2018-026.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High resolution and sensitivity gamma camera with active septa. A first Monte Carlo study

  • Ilisie, Victor
  • Moliner Martínez, Laura
  • Oliver-Gil, Sandra|||0000-0001-8258-3972
  • F Sánchez
  • González Martínez, Antonio Javier
  • Seimetz, Michael
  • Rodríguez-Álvarez, M.J.|||0000-0001-8333-8792
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] Gamma cameras are of great interest due to their high potential in the field of Nuclear Medicine Imaging. They allow for an early diagnosis of reduced size tumors, and also for a wide variety of preclinical studies with the aim of designing more effective treatments against cancer. In this work we propose a significantly improved multi-pinhole collimator gamma camera and perform a first Monte Carlo analysis of its characteristics. Maintaining the configuration of a multi-pinhole collimator with a high degree of overlapping (thus with a high sensitivity), we add a new element, an active septa, that besides acting as a collimator, is able to measure the impact coordinates of the incident photon. This way one is able to unambiguously identify through which pinhole any gamma ray passes before being detected. The result is a high sensitivity and resolution multi-pinhole gamma camera with an arbitrarily large field of view. As a consequence, the final reconstructed image does not suffer from the undesired artifacts or truncation associated to the multiplexing phenomenon. In this study we focus on the development of a system able to visualize in 3D tumors, nodes and metastasis in real time in the operating room with very low dose. We also briefly analyse and propose a novel design for a Single Photon Emission Computed Tomography system., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant Agreement No. 695536). This work was supported in part by the Spanish Government Grants Generalitat Valenciana, APOSTD/2019/086 and TEC2016-79884-C2 and RTC-2016-5186-1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Performance comparison of large-area SiPM arrays suitable for gamma ray detectors

  • Gonzalez-Montoro, Andrea
  • González Martínez, Antonio Javier
[EN] The use of photosensors of the type Silicon Photomultpliers (SiPM) has widely been extended in recent years for multiple applications in both research and industry. However, there is a lack of comparative studies of different SiPMs under the same conditions, making it difficult to choose the most appropriate one for a specific application. SiPM arrays are suitable for gamma rays detectors, especially when covering large active areas. They are used either in clinical or pre-clinical scenarios, constituting Single-Photon Emission Computed Tomography (SPECT) and Positron Emission Tomography (PET) scanners, or just gamma cameras. The current work presents, for the first time, a comparative study between SensL, Hamamatsu Photonics and KETEK arrays of 12 x 12 SiPMs, with individual active areas of 3 mm x 3 mm, thus covering a total active area of about 5 cm x 5 cm. In this study, we have first evaluated their bias and temperature dependencies, resulting in a very similar behaviour with just a slightly larger dependency of the tested Hamamatsu parts. We also report the performance of detector blocks based on these three SiPM arrays, when coupled to pixelated crystal arrays and monolithic scintillators, in terms of photon impact estimation accuracy, as well as energy resolution. In the case of the monolithic crystals, also the depth of interaction resolution was determined. Both monolithic and pixelated blocks are nowadays widely used in academia or are commercially available for molecular imaging systems. The results obtained for the three SiPM arrays when using those crystals, are comparable, without observing any significant different among them., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement No 695536). It has also been supported by the Spanish Ministerio de Economia, Industria y Competitividad under Grant TEC2016-79884-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Design and Development of ToF-PET Detectors based on Metascintillators

  • Latella, Riccardo|||0000-0002-5044-9557
[ES] Esta tesis doctoral explora el desarrollo y la aplicación de nuevos materiales centelleadores adecuados para la Tomografía por Emisión de Positrones con Tiempo de Vuelo (ToF-PET), con el objetivo de mejorar la resolución temporal utilizando metacentelleadores. La información temporal mejora la relación señal-ruido de las imágenes clínicas, ofreciendo mayor contraste que permite detectar precozmente tumores de pequeño tamaño y baja densidad, además de investigar enfermedades neurodegenerativas. Los metacentelleadores son estructuras compuestas por múltiples capas de materiales centelleadores distintos, capaces de equilibrar una alta absorción de rayos gamma y tiempos de decaimiento breves, mejorando el rendimiento de los sistemas PET. Este trabajo revisa la física fundamental del PET, en particular las limitaciones de centelleadores como BGO, LYSO, BaF2 y EJ232. La introducción de metacentelleadores, que combinan materiales densos (BGO, LYSO) con emisores rápidos (EJ232, BaF2), permite la compartición energética entre materiales y mejora el sistema. Se probaron combinaciones como BGO/EJ232, LYSO:Ce/EJ232 y BGO/BaF¿. En el caso de BGO/EJ232, un metapíxel de 3×3×15 mm³ logró una resolución temporal del módulo (DTR) de 159 ps, equivalente a una CTR de 224 ps. Las distribuciones de tiempos de subida permitieron discriminar tipos de eventos, mostrando su potencial para mejorar la resolución. Además, estas combinaciones mejoraron la detección de fotones Cherenkov al acoplarse con SiPM sensibles al VUV. En los BGO/BaF2, un modelo optimizado de compartición energética logró una resolución del 22%, cercana al 18% del BGO puro. Una corrección de "time walk" aplicada a eventos compartidos mejoró el CTR de 319 ps a 242 ps, alcanzando 108 ps para el 13% de eventos más rápidos, comparable al de un cristal LYSO:Ce,Ca de 3×3×5 mm³. Para la validación experimental se usaron SiPM de última generación, incluyendo modelos con zanjas metálicas (MT), seleccionados por su alta eficiencia en UV y VUV. Usando electrónica avanzada con un canal dedicado a la temporización, se logró un CTR de 71 ps con cristales LYSO:Ce,Ca, 18 ps mejor que sin MT. Una versión pasiva del sistema electrónico mostró solo 8 ps de degradación respecto al mejor resultado con amplificación, mostrando el potencial de reducción de costes y consumo energético. Una parte clave de la tesis aborda las complejidades del procesamiento de señales en estructuras multimaterial. Aunque complica el acceso a la información energética y temporal, permite reconstrucción de eventos más refinada mediante el modelo de compartición energética. Esta interacción única entre capas permite una interpretación más precisa de la información gamma. Finalmente, se exploran futuras direcciones como el uso de nanocristales y nuevos materiales para mejorar aún más la resolución y la eficiencia. Combinando materiales innovadores, electrónica rápida y nuevas tecnologías de SiPM, los metacentelleadores ofrecen un camino prometedor para la próxima generación de sistemas PET con tiempo de vuelo., [CA] Aquesta tesi doctoral explora el desenrotllament i l'aplicació de nous materials centellejadors adequats per a la Tomografia per Emissió de Positrons amb temps de Vol (ToF-PET), amb l'objectiu de millorar la resolució temporal utilitzant metacentellejadors. La informació temporal millora la relació senyal-soroll de les imatges clíniques, oferint un major contrast que permet detectar precoçment tumors de xicoteta grandària i baixa densitat, a més d'investigar malalties neurodegeneratives. Els metacentellejadors són estructures compostes per múltiples capes de materials centellejadors distints, capaços d'equilibrar una alta absorció de raigs gamma i temps de decaïment ràpids, millorant el rendiment dels escàners PET. Este treball revisa la física fonamental del PET, en particular les limitacions dels centellejadors tradicionals com BGO, LYSO, BaF2 i EJ232. La introducció dels metacentellejadors, que combinen materials densos amb alta capacitat d'absorció (BGO, LYSO) i materials amb emissió ràpida de fotons (EJ232, BaF¿), permet la compartició d'energia entre materials i millora el sistema. Es van provar combinacions com BGO/EJ232, LYSO:Ce/EJ232 i BGO/BaF2. En el cas dels BGO/EJ232, un metapíxel de 3×3×15 mm³ va aconseguir una resolució temporal del detector (DTR) de 159 ps, corresponent a una CTR de 224 ps. Les distribucions dels temps de pujada es van utilitzar per a discriminar tipus d'esdeveniments, mostrant el potencial de millora. A més, aquestes combinacions van millorar la detecció de fotons Cherenkov quan es van acoblar a SiPM sensibles al VUV. En els BGO/BaF2, un model optimitzat de compartició d'energia va aconseguir una resolució del 22%, pròxima al 18% del BGO pur. Una correcció del "time walk" aplicada a esdeveniments compartits va millorar el CTR de 319 ps a 242 ps, aconseguint 108 ps per al 13% d'esdeveniments més ràpids, comparable al d'un cristall LYSO:Ce,Ca de 3×3×5 mm³. Per a la validació experimental es van emprar SiPM d'última generació, incloent models amb rases metàl·liques (MT), seleccionats per la seua alta eficiència en UV i VUV. Amb electrònica avançada i un canal dedicat a la temporització, es va aconseguir un CTR de 71 ps amb cristalls LYSO:Ce,Ca, 18 ps millor que els SiPM sense MT. Una versió passiva del mateix sistema va mostrar només 8 ps de degradació respecte al millor resultat amb amplificadors, demostrant el potencial de reducció de costos i consum energètic. Una part clau de la tesi aborda les complexitats del processament de senyals en estructures multimaterial. Encara que complica l'accés a la informació energètica i temporal, permet una reconstrucció més refinada mitjançant el model de compartició d'energia. Aquesta interacció única entre capes permet una interpretació més precisa de la informació gamma. Finalment, s'exploren possibles línies futures com l'ús de nanocristalls i nous materials per a millorar encara més la resolució i eficiència. Combinant materials innovadors, electrònica ràpida i noves tecnologies de SiPM, els metacentellejadors oferixen un camí prometedor per a la pròxima generació de sistemes PET amb temps de vol., [EN] This PhD thesis investigates the development and application of novel scintillation material suitable for Time-of-Flight Positron Emission Tomography (ToF-PET), aiming to improve the current state-of-the-art in timing resolution using metascintillators. The timing information enhances the signal-to-noise ratio of the clinical image, leading to better contrast, which allows physicians to detect small and low-uptake tumors earlier, as well as investigate neurodegenerative diseases, among others. We refer to metascintillators as structures made of multiple layers of distinct scintillating materials to balance high stopping power and fast decay times, playing an important role in PET scanner performance. This work starts by reviewing the fundamental physics of PET, particularly the limitations of traditional scintillators such as bismuth germanate (BGO), lutetium-yttrium oxyorthosilicate (LYSO), barium fluoride (BaF2), and plastic scintillators (such as EJ232). The introduction of metascintillators, which combine dense materials (BGO, LYSO) for high stopping power and fast photon emission ones (EJ232, BaF2), addresses these challenges by enabling energy sharing and improving overall system performance. Several different combinations of materials were tested, including BGO/EJ232, LYSO:Ce/EJ232, and BGO/BaF2. For BGO/EJ232 metascintillators, a 3×3×15 mm³ metapixel achieved a detector timing resolution (DTR) of 159 ps, corresponding to a coincidence timing resolution (CTR) of 224 ps. Rise time distributions were successfully used for event discrimination, showing the potential to further enhance timing resolution. Additionally, BGO/EJ232 combinations synergistically improved Cherenkov photon detection when paired with VUV-sensitive SiPMs. For BGO/BaF¿ metascintillators, the optimized energy-sharing model achieved an energy resolution of 22%, close to the 18% resolution of bulk BGO pixels under similar readout conditions. A time walk correction applied to energy-shared events significantly improved timing performance, starting from a CTR of 319 ps and achieving 242 ps, reaching 108 ps for a subset of 13% of the most shared and fast events, comparable to the CTR of a 3×3×5 mm³ LYSO:Ce,Ca reference crystal. The experimental validation used state-of-the-art SiPMs, including the latest generations with metal trenches (MT), selected for their high photon detection efficiency in vacuum-ultraviolet and near-ultraviolet wavelengths. Using advanced electronics with a dedicated timing channel, these devices achieved a CTR of 71 ps with 3×3×5 mm³ LYSO:Ce,Ca crystals, 18 ps better than former SiPMs without MT, confirming the superior timing performance of this technology. A fully passive version of the same system showed degradation of only 8 ps compared to the best amplified result, further underlining the potential to reduce frontend costs and power consumption. A key part of the thesis discusses the signal processing challenges presented by the multi-material structure of metascintillators. While this structure complicates access to energy and timing information, it enables refined event reconstruction by leveraging the energy-sharing model. This unique photon interaction across the layers allows a more accurate and efficient interpretation of gamma-ray information. Finally, the thesis explores future directions for metascintillator development, including the potential for nanocrystal scintillators and other advanced materials to further push the limits of timing resolution and photon detection efficiency. By combining innovative materials, high-frequency electronics, and new SiPM technologies, metascintillators offer a promising path for the next generation of ToF-PET systems. In summary, this thesis demonstrates that metascintillators, with their multi-material structure and enhanced timing capabilities, significantly improve PET detector performance, addressing traditional trade-offs between sensitivity and timing, and enabling more, This work has been initiated in the frame of the ERC Advanced Grant TICAL #338953 PI Paul Lecoq, and the related Prof-of-Concept Project ULTIMA #680552, both funded by the European Commission. It has been in part supported by the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program (Grant Agreement #695536) and the Brazilian funding agency Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq, Grant Agreement No 202378/2020-9). It is pursued through a public–private partnership between Multiwave Metacrystal SA, Geneva, Switzerland, and the Instituto de Instrumentación para Imagen Molecular, Centro Mixto CSIC-UPV, Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

TOF studies for dedicated PET with open geometries

  • Moliner Martínez, Laura
  • González Martínez, Antonio Javier
  • Oliver-Gil, Sandra|||0000-0001-8258-3972
  • Giménez-Alventosa, Vicent|||0000-0003-1646-6094
  • Rodríguez-Álvarez, M.J.|||0000-0001-8333-8792
  • F Sánchez
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Ilisie, V.
  • Gonzalez, A.
  • Cañizares, G.
  • Lamprou, E.
  • Alamo, J.
[EN] Recently, two novel PET devices have been developed with open geometries, namely: breast and prostate-dedicated scanners. The breast-dedicated system comprises two detector rings of twelve modules with a field of view of 170 mm x 170 mm x 94 mm. Each module consists of a continuous trapezoidal LYSO crystal and a PSPMT. The system has the capability to vary the opening of the rings up to 60 mm in order to allow the insertion of a needle to perform a biopsy procedure. The prostate system has an open geometry consisting on two parallel plates separated 28 cm. One panel includes 18 detectors organized in a 6 x 3 matrix while the second one comprises 6 detectors organized in a 3 x 2 matrix. All detectors are formed by continuous LYSO crystals of 50 mm x 50 mm x15 mm, and a SiPM array of 12 x 12 individual photo-detectors. The system geometry is asymmetric maximizing the sensitivity of the system at the prostate location, located at about 2/3 in the abdomen-anus distance. The reconstructed images for PET scanners with open geometries present severe artifacts due to this peculiarity. These artifacts can be minimized using Time Of Flight information (TOF). In this work we present a TOF resolution study for open geometries. With this aim, the dedicated breast and prostate systems have been simulated using GATE (8.1 version) with different TOF resolutions in order to determine the image quality improvements that can be achieved with the existing TOF-dedicated electronics currently present in the market. The images have been reconstructed using the LMOS algorithm including TOF modeling in the calculation of the voxel-Line Of Response emission probabilities., This work was supported in part by the Spanish Government Grants TEC2016-79884-C2 and RTC-2016-5186-1 and by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 695536).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of a High-Aspect Ratio Detector With Lateral Sides Readout for Compton PET

  • Barrio, John
  • Cucarella, Neus
  • Ilisie, Victor
  • González Martínez, Antonio Javier
  • Freire-López-Fando, Marta
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
This work was supported by the European Research Council through the European Union's Horizon 2020 Research and Innovation Program under Grant 695536.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exploring TOF Capabilities of PET Detector Blocks Based on Large Monolithic Crystals and Analog SiPMs

  • Lamprou, Efthymios
  • González Martínez, Antonio Javier
  • F Sánchez
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] Monolithic scintillators are more frequently used in PET instrumentation due to their advantages in terms of accurate position estimation of the impinging gamma rays both planar and depth of interaction, their increased efficiency, and expected timing capabilities. Such timing performance has been studied when those blocks are coupled to digital photosensors showing an excellent timing resolution. In this work we study the timing behaviour of detectors composed by monolithic crystals and analog SiPMs read out by an ASIC. The scintillation light spreads across the crystal towards the photosensors, resulting in a high number of SiPMs and ASIC channels fired. This has been studied in relation with the Coincidence Timing Resolution (CTR). We have used LYSO monolithic blocks with dimensions of 50 x 50 x 15 mm(3) coupled to SiPM arrays (8 x 8 elements with 6 x 6 mm(2) area) which compose detectors suitable for clinical applications. While a CTR as good as 186 ps FWHM was achieved for a pair of 3 x 3 x 5 mm(3) LYSO crystals, when using the monolithic block and the SiPM arrays, a raw CTR over 1 ns was observed. An optimal timestamp assignment was studied as well as compensation methods for the time-skew and time-walk errors. This work describes all steps followed to improve the CTR. Eventually, an average detector time resolution of 497 ps FWHM was measured for the whole thick monolithic block. This improves to 380 ps FWHM for a central volume of interest near the photosensors. The timing dependency with the photon depth of interaction and planar position are also included., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement No 695536). It has also been supported by the Spanish Ministerio de Economia, Industria y Competitividad under Grant TEC2016-79884-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel method to measure the intrinsic spatial resolution in PET detectors based on monolithic crystals

  • González, A.
  • Bruyndonckx, Peter
  • Cañizares-Ledo, Gabriel
  • F Sánchez
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • González Martínez, Antonio Javier
[EN] The main aim of this work is to provide a method to retrieve the intrinsic spatial resolution of a gamma-ray detector block based on monolithic crystals within an assembled scanner. This method consists on a discrimination of the data using a software collimation process. The results are compared with an alternative method of separating two detector blocks far enough to produce a "virtual" source collimation due to the geometric constraints on the allowed coincidence event angles. A theoretical model has been deduced to fit the measured light distribution profiles, allowing estimating the detector intrinsic spatial resolution. The detector intrinsic spatial resolution is expected to follow a Gaussian distribution and the positron-emitter source shape, given the small size of a Na-22 source with 0.25 mm in diameter, can be assumed to follow a Lorentzian profile. However, the collimation of the data modifies the source shape that is no longer a pure Lorentzian distribution. Therefore, the model is based on the convolution of a Gaussian shaped distribution (contribution of the detector) and a modified Lorentzian distribution (contribution of the collimated source profile) that takes into account the collimation effect. Three LYSO crystals geometries have been studied in the present work, namely a 10 mm thick trapezoidal monolithic block, and two rectangular monolithic blocks with thicknesses of 15 mm and 20 mm, respectively. All the blocks have size dimensions of 50 mm x 50 mm. The experimental results yielded an intrinsic detector spatial resolution of 0.64 +/- 0.02 mm, 0.82 +/- 0.02 and 1.07 +/- 0.03 mm, for the 10 mm, 15 mm and 20 mm thick blocks, respectively, when the source was placed at the center of the detector. The detector intrinsic spatial resolution was moreover evaluated across one of the axis of each crystal. These values worsen to an average value of 0.68 +/- 0.04 mm, 0.90 +/- 0.14 and 1.29 +/- 0.19 mm, respectively, when the whole crystal size is considered, as expected. These tests show an accurate method to determine the intrinsic spatial resolution of monolithic-based detector blocks, once assembled in the PET system., This project has received funding from the European Research Council, Spain (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement No 695536). It has also been supported by the EU, Spain Grant 603002 under the FP7 program, and by the Spanish Ministerio de Economia, Industria y Competitividad under Grant TEC2016-79884-C2-1-R and through PROSPET (DTS15/00152) funded by the Ministerio de Economia y Competitividad, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Progress report on the MEDAMI 2019 and CTR research at the DMIL in i3M

  • González Martínez, Antonio Javier
  • F Sánchez
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Barrio, J.
  • Lamprou, E.
  • Ilisie, Victor
[EN] This contribution reports on the recently held MEDAMI 2019 workshop in Valencia (15-17th May 2019). This workshop is about advanced molecular imaging and the main topic of this last edition was Imaging in Immunotherapy. Around 70 attenders met together during three days. This meeting made it possible to join medical doctors and instrumentalists. In MEDAMI 2019 it was exposed the new immunotherapies from a clinical and research point of view. It was shown the already observed improvements when using these therapies. At the same time, we heard about the difficulties and limitations of current molecular imaging in this particular field. It was clear that improvements in system sensitivity and resolution are demanded. Timing information can be utilized in different ways to improve the image quality in PET systems. Precise Coincidence Time Resolution (CTR) improves the signal-to-noise ratio and, therefore, the image contrast, allowing for instance to distinguish low uptake tumors, multicentric lesions, or tumor heterogeneity, to name but a few. Both high time resolution and angular coverage in a PET system can improve the effective sensitivity. An example of a system benchmarking the timing resolution is the Siemens Biograph Vision with 214 ps FWHM, enhancing the detectability. The Explorer total-body PET from UC Davis improves the system sensitivity by having a 2 meters long PET scanner. Deep investigations, from different research groups, are being carried out to further push the limits of timing resolution. This work also describes some of the projects on high timing performance that are being carried out at the Detector for Molecular Imaging Lab (DMIL) at the Institute for Instrumentation in Molecular Imaging (i3M) in Valencia. The DMIL group has extensively worked on detectors and implementation of PET systems enabling the use of accurate timing information. In this progress report we describe the results obtained at the DMIL regarding timing determination in gamma-ray detectors both based on monolithic and pixelated crystals. Although with 15 min thick LYSO blocks it was tough to obtain values of CTR below 500 ps when using analog SiPMs and ASIC-based readout, this was improved down to 250 ps if small 3 mm size and 6 mm height pixels under the one-to-one coupling approach were enabled. This type of approach, the one-to-one coupling, seems to benefit from the light collection in a single photosensor element and, therefore, to improve the timing properties. Monolithic blocks offer, on the contrary, advantages such as photon depth of interaction. In order to separate Compton and photoelectric events we have thought of a detector block design with a high aspect ratio, using LYSO crystals of 51 mm size vs. 3 mm thickness, read-out by the four lateral sides. We have demonstrated the possibility to reach below 2 mm FWHM spatial resolution with an energy resolution of 12%., The DMIL work presented in this paper has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement No. 695536). It has also been supported by the Spanish Ministerio de Economia, Industria y Competitividad under Grant TEC2016-79884-C2-1-R. The author would like to thank all current and former members of the DMIL at i3M for their continuous contributions to this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Single-Ended Readout PET Detector Based on Pixelated Crystals With TOF and DOI Capabilities

  • Cucarella-Melo, Neus
  • Barrio-Toala, John|||0000-0001-5181-2146
  • Sanchez-Gonzalo, David
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • González Martínez, Antonio Javier
[EN] Traditional PET detectors based on pixelated scintillation crystals with single-ended readout do not provide depth of interaction (DOI) information in an easy and cost-effective way. In this work, we propose a PET detector with single-ended readout and 1:1 coupling, based on arrays of naked pixelated crystals that are glued in one direction, and optically separated in the other one. We have named this approach as pseudo-slab. In this configuration, some of the optical photons will propagate in the glued direction, generating a light distribution from which DOI information can be retrieved. We have characterized four different detector configurations, all of them consisting of a linear array of 1x8 LYSO crystals of 3x3x20 mm(3 )each, with an optical glue of approximately 70 mu m in between them. The top and bottom faces are polished, and with a different number of unpolished lateral surfaces (2 versus 4) and different wrappings (Enhanced Specular Reflector versus BaSO4 ). The results obtained for the four detector configurations show energy resolutions ranging from 8.5% to 9.8% and coincidence time resolutions (with a reference pixel) below 290 ps for all cases using only the fastest timestamp and close to 230 ps when energy-weighted averaging of multiple timestamps is applied (corresponding to 182 ps detector time resolution). Regarding DOI performance, all configurations provide DOI information, showing a better performance with more number of unpolished faces and also when using BaSO4 as a reflector., This work was supported by the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program under Grant 695536. The work of Neus Cucarella was supported by the Ministerio de Ciencia e Innovacion under Grant PTA2022-022459-I (technician grant). The work of David Sanchez was supported by Generalitat Valenciana under Grant CIAPOS/2021/263 (postdoctoral grant).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the early use of antivirals on the COVID-19 pandemic. A computational network modeling approach

  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Martínez-Rodríguez, David|||0000-0002-2093-7840
  • San Julián-Garcés, Raúl|||0000-0003-3052-3200
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
[EN] It seems that we are far from controlling COVID-19 pandemics, and, consequently, returning to a fully normal life. Until an effective vaccine is found, safety measures as the use of face masks, social distancing, washing hands regularly, etc., have to be taken. Also, the use of appropriate antivirals in order to alleviate the symptoms, to control the severity of the illness and to prevent the transmission, could be a good option that we study in this work. In this paper, we propose a computational random network model to study the transmission dynamics of COVID-19 in Spain. Once the model has been calibrated and validated, we use it to simulate several scenarios where effective antivirals are available. The results show how the early use of antivirals may significantly reduce the incidence of COVID-19 and may avoid a new collapse of the health system. (c) 2020 Elsevier Ltd. All rights reserved., This work has been financed in part by ERC grant 695536-4D-PET. This work has been supported by the Spanish Ministerio de Economa, Industria y Competitividad (MINECO), the Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant MTM2017-89664-P. This paper has been supported by the European Union through the Operational Program of the [European Regional Development Fund (ERDF)/European Social Fund (ESF)] of the Valencian Community 2014-2020. Files: GJIDI/2018/A/010 and GJIDI/2018/A/009. The authors gratefully acknowledge the Gauss Centre for Supercomputing e.V. (www.gauss-centre.eu) for funding this project by providing computing time on the GCS Supercomputer JUDAC at Julich Supercomputing Centre (JSC), project transdyn_cov2, and the Partnership For Advanced Computing in Europe (PRACE-RI) support to mitigate the impact of COVID-19 pandemic.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A scintillator geometry suitable for very small PET gantries

  • González Martínez, Antonio Javier
  • F Sánchez
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Gonzalez-Montoro, A.
  • Aguilar, A.
  • Cañizares, G.
  • Martí, R.
  • Iranzo, S.
  • Lamprou, E.
  • Sánchez, S.
This work was supported by the Spanish Ministerio de Economia, Industria y Competitividad under Grants No. FIS2014-62341-EXP and TEC2016-79884-C2-1-R. This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No 695536).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new brain dedicated PET scanner with 4D detector information

  • González-Montoro, Andrea
  • Barbera Ballester, Julio
  • Mondejar, Álvaro
  • Díaz González, Karel
  • Lucero-Ruiz, Alejandro
  • Alamo Valenzuela, Jorge
  • Morera Ballester, Constantino
  • Cucarella, Neus
  • Ilisie, Victor
  • Valladares de-Francisco, Celia
  • John Prior
  • Sanchez-Gonzalo, David
  • Freire-López-Fando, Marta
  • Jiménez-Serrano, Santiago|||0000-0003-2917-6053
  • Barrio-Toala, John|||0000-0001-5181-2146
  • Moliner Martínez, Laura
  • González Martínez, Antonio Javier
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] In this article, we present the geometrical design and preliminary results of a high sensitivity organ-specific Positron Emission Tomography (PET) system dedicated to the study of the human brain. The system, called 4D-PET, will allow accurate imaging of brain studies due to its expected high sensitivity, high 3D spatial resolution and, by including precise photon time of flight (TOF) information, a boosted signal-to-noise ratio (SNR). The 4D-PET system incorporates an innovative detector design based on crystal slabs (semi-monolithic) that enables accurate 3D photon impact positioning (including photon Depth of Interaction (DOI) measurement), while providing a precise determination of the photon arrival time to the detector. The detector includes a novel readout system that reduces the number of detector signals in a ratio of 4:1 thus, alleviating complexity and cost. The analog output signals are fed to the TOFPET2 ASIC (PETsys) for scalability purposes. The present manuscript reports the evaluation of the 4D-PET detector, achieving best values 3D resolution values of <1.6 mm (pixelated axis), 2.7±0.5 mm (monolithic axis) and 3.4±1.1 (DOI axis) mm; 359 ± 7 ps coincidence time resolution (CTR); 10.2±1.5 % energy resolution; and sensitivity of 16.2% at the center of the scanner (simulated). Moreover, a comprehensive description of the 4D-PET architecture (that includes 320 detectors), some pictures of its mechanical assembly, and simulations on the expected image quality are provided., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 695536). This work was supported in part by the Spanish Government Grants Generalitat Valenciana, APOSTD/2019/086 and APOSTD/2020/139.We thank financial support from Generalitat Valenciana through the program Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

First Results of the 4D-PET Brain System

  • A González
  • Álamo-Valenzuela, Jorge
  • Barberá-Ballester, Julio
  • Lucero-Ruiz, Alejandro
  • Díaz González, Karel
  • Álvaro Mondejar
  • Morera-Ballester, Constantino
  • John Prior
  • Jiménez-Serrano, Santiago|||0000-0003-2917-6053
  • Cucarella-Melo, Neus
  • Freire-López-Fando, Marta
  • González Martínez, Antonio Javier
  • Moliner Martínez, Laura
  • Sanchez-Gonzalo, David
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] Positron Emission Tomography (PET) imaging is the molecular technique of choice for studying many illnesses, including the ones related to the brain. Nevertheless, the use of PET scanners in neurology is limited by several factors, such as their limited availability for brain imaging due to the high oncology demand for PET and the low sensitivity and poor spatial resolution in the brain of the standard PET scanners. To expand the PET application in neurology, brain-specific systems with increased clinical and physical sensitivities and higher spatial resolution are required. The present work reports on the design and development process of a compact dedicated PET scanner suitable for human brain imaging. This paper includes the description and experimental validation of the detector components and their implementation in a full-size system called 4D-PET. The detector has been designed to simultaneously provide photon DOI and TOF information. It is based on the semi-monolithic LYSO modules optically coupled to SiPMs and connected to a multiplexing readout. The analog output signals are fed to the PETsys TOFPET2 ASIC circuits enabling scalability of the readout. The evaluation of the 4D-PET modules resulted in average detector resolutions of 2.1±1.0 mm, 3.4±1.8 mm, and 386±9 ps for the y- (transaxial direction), DOI-, and CTR TOF, respectively. The preliminary 4D-PET imaging performance is reported through simulations and, for the first time, through the real reconstructed images (collected in the La Fe Hospital, Valencia)., This work was supported in part by the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program under Grant 695536, and in part by the Generalitat Valenciana through the Program Equipamiento e Infraestructuras FEDER 2021-22 under Grant IDIFEDER/2021/004. The work of Andrea Gonzalez-Montoro was supported by MICIU/AEI/SFE/RYC2021-031744-I.All authors contributed equally to this work.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Architecture-level optimization on digital silicon photomultipliers for medical imaging

  • Bandi, Franco
  • Ilisie, Víctor
  • Vornicu, Ion
  • Carmona-Galán, R.
  • Benlloch Baviera, José María
  • Rodríguez-Vázquez, Ángel
This article belongs to the Section Physical Sensors., Silicon photomultipliers (SiPMs) are arrays of single-photon avalanche diodes (SPADs) connected in parallel. Analog silicon photomultipliers are built in custom technologies optimized for detection efficiency. Digital silicon photomultipliers are built in CMOS technology. Although CMOS SPADs are less sensitive, they can incorporate additional functionality at the sensor plane, which is required in some applications for an accurate detection in terms of energy, timestamp, and spatial location. This additional circuitry comprises active quenching and recharge circuits, pulse combining and counting logic, and a time-to-digital converter. This, together with the disconnection of defective SPADs, results in a reduction of the light-sensitive area. In addition, the pile-up of pulses, in space and in time, translates into additional efficiency losses that are inherent to digital SiPMs. The design of digital SiPMs must include some sort of optimization of the pixel architecture in order to maximize sensitivity. In this paper, we identify the most relevant variables that determine the influence of SPAD yield, fill factor loss, and spatial and temporal pile-up in the photon detection efficiency. An optimum of 8% is found for different pixel sizes. The potential benefits of molecular imaging of these optimized and small-sized pixels with independent timestamping capabilities are also analyzed., This work was supported by EU H2020 MSCA through Project ACHIEVE-ITN (Grant No 765866), by the Spanish MINECO and European Region Development Fund (ERDF/FEDER) through Project RTI2018-097088-B-C31, by the US Office of Naval Research through Grant No. N00014-19-1-2156, by the European Research Council through Grant No. 695536, and by Generalitat Valenciana APOSTD/2019/086., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparative Analysis of Data Acquisition Setups for Fast-Timing in ToF-PET Applications

  • Latella, Riccardo
  • Gonzalez, Antonio J.
  • Benlloch Baviera, José María
  • Lecoq, Paul
  • Konstantinou, Georgios
The signal-to-noise ratio in Positron Emission Tomography (PET) improves with precise timing resolution. PET systems enabling the capability of Time-of-Flight (ToF) are nowadays available. This study assesses various data configurations, comparing the obtained timing performances applicable to ToF-PET systems. Different readout configurations were evaluated together with Silicon Photomultipliers (SiPMs) photosensors from the Fondazione Bruno Kessler (FBK), with and without the so-called metal trench (MT) technology. The tests were carried out with scintillation crystals of 3×3×5 mm (LYSO:Ce,Ca) from SIPAT. Two onboard FPGA-based systems, namely the Felix Time-to-Digital Converter (TDC) from Tediel S.r.l. and the ASIC-based FastIC from the University of Barcelona, along with custom-made high-frequency electronics (CM-HF), were compared. Considering only photopeak events, the best coincidence timing resolution (CTR) results obtained were 71 ps with the MT SiPMs. This result worsened to 88 ps with the old version of the same device that does not include the MT technology (called HD). The results demonstrate substantial CTR improvements when MT SiPMs were used across the different scenarios, resulting in a timing improvement in the 10 to 45 ps range compared to HD SiPMs. Notably, the Felix TDC achieved sub-100 ps timing results, emphasizing the potential of FPGA technology in ToF-PET applications. Moreover, the fully passive version of the CM-HF connected to the MT SiPMs shows only a degradation of 8 ps difference compared to the version using amplifiers. The novel MT-type SiPMs promise superior timing performance, enhancing accuracy and efficiency in PET imaging systems., Funding Agency: 10.13039/501100016134-frame of the ERC Advanced Grant TICAL (Grant Number: 338953 PI (P. Lecoq)) Prof-of-Concept Project ULTIMA (Grant Number: 680552) 10.13039/501100000780-European Commission European Research Council (ERC) through the European Union’s Horizon 2020 Research and Innovation Program (Grant Number: 695536), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Detector Characterization of a High-Resolution Ring for PET Imaging of Mice Heads With sub-200 ps TOF

  • Valladares, Celia
  • Barrio Toala, J.
  • Cucarella, Neus
  • Freire, Marta
  • Vidal, Luis F.
  • Benlloch Baviera, José María
  • González Martínez, Antonio Javier
The signal-to-noise ratio in Positron Emission Tomography (PET) improves with precise timing resolution. PET systems enabling the capability of Time-of-Flight (ToF) are nowadays available. This study assesses various data configurations, comparing the obtained timing performances applicable to ToF-PET systems. Different readout configurations were evaluated together with Silicon Photomultipliers (SiPMs) photosensors from the Fondazione Bruno Kessler (FBK), with and without the so-called metal trench (MT) technology. The tests were carried out with scintillation crystals of 3×3×5 mm (LYSO:Ce,Ca) from SIPAT. Two onboard FPGA-based systems, namely the Felix Time-to-Digital Converter (TDC) from Tediel S.r.l. and the ASIC-based FastIC from the University of Barcelona, along with custom-made high-frequency electronics (CM-HF), were compared. Considering only photopeak events, the best coincidence timing resolution (CTR) results obtained were 71 ps with the MT SiPMs. This result worsened to 88 ps with the old version of the same device that does not include the MT technology (called HD). The results demonstrate substantial CTR improvements when MT SiPMs were used across the different scenarios, resulting in a timing improvement in the 10 to 45 ps range compared to HD SiPMs. Notably, the Felix TDC achieved sub-100 ps timing results, emphasizing the potential of FPGA technology in ToF-PET applications. Moreover, the fully passive version of the CM-HF connected to the MT SiPMs shows only a degradation of 8 ps difference compared to the version using amplifiers. The novel MT-type SiPMs promise superior timing performance, enhancing accuracy and efficiency in PET imaging systems., Funding Agency: European Research Council (ERC) through the European Union’s Horizon 2020 Research and Innovation Program (4D-PET) (Grant Number: 695536) Open Access Charge: CRUE-Universitat Politecnica de València Generalitat Valenciana and European Social Fund (Grant Number: APOSTD/2021/033) Generalitat Valenciana and European Social Fund (Grant Number: ACIF/2019/112), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Semi-Monolithic Meta-Scintillator Simulation Proof-of-Concept, Combining Accurate DOI and TOF

  • Konstantinou, Georgios
  • Zhang, Lei
  • Bonifacio, Daniel
  • Latella, Riccardo
  • Benlloch Baviera, José María
  • González, Antonio J.
  • Lecoq, Paul
In this study, we propose and examine a unique semimonolithic metascintillator (SMMS) detector design, where slow scintillators (BGO or LYSO) are split into thin slabs and read by an array of SiPM, offering depth-of-interaction (DOI) information. These are alternated with thin segmented fast scintillators (plastic EJ232 or EJ232Q), also read by single SiPMs, which provides pixel-level coincidence time resolution (CTR). The structure combines layers of slow scintillators of size 0.3× 25.5× (15 or 24) mm3 with fast scintillators of size 0.1× 3.1× (15 or 24) mm3. We use a Monte Carlo Gate simulation to gauge this novel semimonolithic detector's performance. We found that the time resolution of SMMS is comparable to pixelated metascintillator designs with the same materials. For example, a 15-mm deep LYSO-based SMMS yielded a CTR of 121 ps before applying timewalk correction (after correction, 107-ps CTR). The equivalent BGO-based SMMS presented a CTR of 241 ps, which is a 15% divergence from metascintillator pixel experimental findings from previous works. We also applied neural networks to the photon distributions and timestamps recorded at the SiPM array, following guidelines on semimonolithic detectors. This led to determining the DOI with less than 3-mm precision and a confidence level of 0.85 in the best case, plus more than 2 standard deviations accuracy in reconstructing energy sharing and interaction energy. In summary, neural network prediction capabilities outperform standard energy calculation methods or any analytical approach on energy sharing, thanks to the improved understanding of photon distribution., Funding Agency: 10.13039/100010663-European Research Council in the framework of the ERC Advanced Grant TICAL (Grant Number: 338953) 10.13039/100010663-European Research Council (ERC) through the European Union’s Horizon 2020 Research and Innovation Program (4D-PET) (Grant Number: 695536), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Simulation Study of Clinical PET Scanners With Different Geometries, Including TOF and DOI Capabilities

  • Cañizares, Gabriel
  • Jiménez-Serrano, Santiago
  • Lucero, Alejandro
  • Morera-Ballester, Constantino
  • Muñoz, Enrique
  • Benlloch Baviera, José María
  • González, Antonio J.
Total Body Positron Emission Tomography (TB-PET) scanners provide high-quality images due to the large sensitivity. Our motivation is to design a TB-PET system with up to 70 cm axial coverage that mitigates the parallax error degradation by using a detector concept based on semi-monolithic LYSO crystals. Furthermore, this detector approach allows to simultaneously reach an accurate Coincidence Time Resolution (CTR) to enhance the image quality by means of Time of Flight (TOF) reconstruction algorithms. We have simulated and compared two Positron Emission Tomography (PET) prototypes with about 70 cm but a different number of detector rings (7 vs. 5). The NEMA NU 2 2018 protocol has been implemented. By correcting the parallax error with the Depth of Interaction (DOI) information, the spatial resolution remains homogeneous and below 3 mm in the entire Field of View (FOV), differently from designs based on pixelated crystals. The sensitivity reaches values of 58 and 115 cps/kBq, for the 5 and 7 rings configurations, respectively. The Noise Equivalent Count Rate (NECR) was found at 563 kcps/mL. This value is lower than other systems, most likely due to the requirement to process a larger number of channels to characterize the DOI. Percent contrasts obtained for two different phantoms are in general beyond 80% for the largest spheres, nearly 100% for the 7 rings configuration once TOF is applied during the reconstruction process. In conclusion, although the sensitivity and NECR results for the 5-rings configuration are lower compared to the 7-rings approach, its overall performance is enhanced by the addition of TOF and parallax error correction, improving that of conventional Whole Body PET scanners (axial length: 20 – 30 cm) in terms of image quality., This work was supported in part by the Imagen Molecular de Alta Sensibilidad Project Launched by the Conselleria de Sanitat Universal i Salut Publica of the Goverment of Valencia Region, announced in the BOE 328, 28 December 2020, cofounded at 50% by the ERDF, and in part by the European Research Council through the European Union’s Horizon 2020 Research and Innovation Program under Agreement 695536, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Insights and simulation of metascintillator-based brain PET systems to enhance ToF capability

  • Bonifacio, Daniel A.B.
  • Latella, Riccardo
  • Murata, H. M.
  • Benlloch Baviera, José María
  • González Martínez, Antonio Javier
  • Lecoq, Paul
  • Konstantinou, Georgios
The integration of Time-of-Flight (ToF) information into Positron Emission Tomography (PET) image reconstruction enhances both signal-to-noise ratio and the localization of annihilation events. A critical component contributing to the accuracy of ToF-PET is the scintillator. To overcome the time resolution limitations in conventional scintillators, the metascintillator approach has been proposed. The metascintillator is an engineered composition of small units that combines and optimizes various features within a single scintillator heterostructure. In this work, metascintillator-based brain PET systems were simulated using the GATE toolkit and compared with designs based on bulk LYSO or BGO. Sensitivity, noise equivalent count rate (NECR) and scatter fraction were evaluated following NEMA guidelines. To match the peak sensitivity of a system utilizing a 15 mm bulk BGO, the metascintillator-based scanners using BGO/BaF2, BGO/EJ232, LYSO/BaF2 and LYSO/EJ232 must possess thicknesses of 23.2 mm, 22.5 mm, 29.7 mm and 31.1 mm, respectively. With ToF gain, the scanner utilizing a 25 mm thick LYSO-EJ232 metascintillator exhibited the most promising NECR curve, peaking at 1180 cps at 1600 MBq. This work takes a significant step towards harnessing the information gain facilitated by the integration of metascintillator-based detectors in PET imaging., This work has been initiated within the framework of a public–private partnership between the Multiwave Metacrystal SA company, based in Geneva (Switzerland), and the Instituto de Instrumentación para Imagen Molecular, Centro Mixto CSIC-UPV, 46022 Valencia (Spain). Their support is greatly acknowledged. Additionally, it has been in part supported by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No 695536): 4D-PET and the Brazilian funding agencies Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq grant agreement No 202378/2020-9 and 435039/2018-0) and Financiadora de Estudos e Projetos, Brazil (FINEP grant agreement No 0294/16). The metascintillator concept presented in this manuscript was based on research first developed within the TICAL: 4D total absorptionTime Imaging CALorimeter ERC (grant agreement no 338953)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Simulation Study of a Frame-Based Motion Correction Algorithm for Positron Emission Imaging

  • Espinos-Morato, Héctor
  • Cascales-Picó, David
  • Vergara, Marina
  • Hernández-Martínez, Ángel
  • Benlloch Baviera, José María
  • Rodríguez-Álvarez, María José
Positron emission tomography (PET) is a functional non-invasive imaging modality that uses radioactive substances (radiotracers) to measure changes in metabolic processes. Advances in scanner technology and data acquisition in the last decade have led to the development of more sophisticated PET devices with good spatial resolution (1-3 mm of full width at half maximum (FWHM)). However, there are involuntary motions produced by the patient inside the scanner that lead to image degradation and potentially to a misdiagnosis. The adverse effect of the motion in the reconstructed image increases as the spatial resolution of the current scanners continues improving. In order to correct this effect, motion correction techniques are becoming increasingly popular and further studied. This work presents a simulation study of an image motion correction using a frame-based algorithm. The method is able to cut the acquired data from the scanner in frames, taking into account the size of the object of study. This approach allows working with low statistical information without losing image quality. The frames are later registered using spatio-temporal registration developed in a multi-level way. To validate these results, several performance tests are applied to a set of simulated moving phantoms. The results obtained show that the method minimizes the intra-frame motion, improves the signal intensity over the background in comparison with other literature methods, produces excellent values of similarity with the ground-truth (static) image and is able to find a limit in the patient-injected dose when some prior knowledge of the lesion is present., This research has been co-financed by the Spanish Government Grants TEC2016-79884-C2, PID2019-107790RB-C22, and PEJ2018-002230-A-AR; the Generalitat Valenciana GJIDI/2018/A/040l and the PTA2019-017113-1/AEI/10.13039/501100011033; the European Union through the European Regional Development Fund (ERDF); and the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 695536)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Timing evaluation of a PET detector block based on semi-monolithic LYSO crystals

  • Cucarella, Neus
  • Barrio Toala, J.
  • Lamprou, Efthymios
  • Valladares, Celia
  • Benlloch Baviera, José María
  • González Martínez, Antonio Javier
[Purpose] Detectors for positron emission tomography (PET) typically use two types of scintillation crystals, pixelated or monolithic. A variant of these types of scintillators are the so-called semi-monolithic crystals. They consist of a monolithic crystal segmented in one direction in pieces called slabs. These scintillators have the potential to successfully combine the benefits of pixelated and monolithic configurations, providing good timing and spatial resolutions as well as the capacity to decode the depth of interaction (DOI) information. In this work, the timing performance of a detector based on semi-monolithic crystals was studied in depth. The energy response was also evaluated., [Methods] The semi-monolithic detector consists of 1 × 24 LYSO slabs of 25.4 × 12 × 0.95 mm3 each. The bottom surface of the slabs is coupled to an array of 8 × 8 silicon photomultipliers (SiPMs) of 3 × 3 mm2 active area, 50 μm cell size and 3.2 mm pitch. The 64 output signals were independently readout by the TOFPET2 ASIC. In order to achieve the best coincidence time resolution (CTR), four different time walk corrections were tested. Additional work investigated the best method of combining the timestamps belonging to the same event., [Results] The resolvability of the slabs in the measured flood maps improves with the thickness of a light guide placed in between the scintillators and photosensors. The energy resolution does not change significantly with values as good as 13.7%. Regarding the CTR, values of 335.8, 363, 369.8, and 402.5 ps have been obtained for the whole detector for no light guide, 0.5, 1.0, and 1.5 mm thickness light guide cases, respectively. These values further improve to 276.1, 302.6, 305.6 and 336.2 ps, respectively, when energy-weighted averaging of timestamps is applied., [Conclusions] We have shown both an excellent timing resolution and good energy resolution for a PET detector based on semi-monolithic crystals. The use of light guides of different thicknesses does not significantly affect the energy resolution of the whole detector, but the timing capabilities slightly worsen with the increasing thickness of the light guide., This work has been supported by the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation programme (grant agreement number: 695536). This work has also been supported by the USA National Institutes of Health (NIH) under grant number: 1R01EB029450-01., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metascintillators: New Results for TOF-PET Applications

  • Lecoq, P.
  • Konstantinou, Georgios
  • Latella, Riccardo
  • Moliner, Laura
  • Nuyts, Johan
  • Zhang, Lei
  • Barrio Toala, J.
  • Benlloch Baviera, José María
  • González Martínez, Antonio Javier
We report on the progress on a first generation of realistic size metascintillators for time-of-flight PET. These heterostructures combine dense LYSO or BGO plates, interleaved with fast scintillator layers producing a bunch of prompt photons from the energy leakage of the recoil photoelectric electron. From a Geant4 simulation of the energy sharing distribution between the dense and the fast scintillator on 42 LYSO-based and 42 BGO-based configurations, a detailed study of the timing performance has been performed on a selection of the most promising 12 LYSO-based and 14 BGO-based metascintillators. A Monte Carlo simulation was first performed to extrapolate from direct measurements of the performance of the metascintillator components, the detector time resolution (DTR), and sensitivity on the basis of the simulated amount of energy leakage to the fast scintillator. An analytic algorithm was then applied to determine an equivalent coincidence time resolution (CTR) from the random association of the DTR distributions from two metapixels in coincidence. This equivalent CTR is calculated in order to obtain the same variance in the reconstructed image as the combination of the DTR distributions of 2 metapixels. Preliminary results confirm that with these simple and still nonoptimized configurations, an equivalent CTR of 150 ps for BGO-based and 140 ps for LYSO-based metapixels of realistic size can be obtained., This work was supported in part by the European Research Council (ERC) through the European Union’s Horizon 2020 Research and Innovation Programme under Grant 695536. The work of P. Lecoq was supported in part by ERC Advanced under Grant TICAL 338953, and in part by the related Proof-ofConcept Project under Grant ULTIMA 680552, both funded by the European Commission. (Corresponding author: P. Lecoq.), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pilot performance of a dedicated prostate PET suitable for diagnosis and biopsy guidance

  • Cañizares, Gabriel
  • González Montoro, Andrea
  • Freire, Marta
  • Lamprou, Efthymios
  • Barrio Toala, J.
  • Sánchez, Filomeno
  • Benlloch Baviera, José María
  • Hernandez, Liczandro
  • Moliner, Laura
  • Vidal, Luis F.
  • Torres, Irene
  • Sopena, Pablo
  • Vera Donoso, César David
  • Bello, Pilar
  • Barberá, Julio
  • González Martínez, Antonio Javier
[Background] Prostate cancer (PCa) represents one of the most common types of cancers facing the male population. Nowadays, to confirm PCa, systematic or multiparametric MRI-targeted transrectal or transperineal biopsies of the prostate are required. However, due to the lack of an accurate imaging technique capable to precisely locate cancerous cells in the prostate, ultrasound biopsies sample random parts of the prostate and, therefore, it is possible to miss regions where those cancerous cells are present. In spite of the improvement with multiparametric MRI, the low reproducibility of its reading undermines the specificity of the method. Recent development of prostate-specific radiotracers has grown the interest on using positron emission tomography (PET) scanners for this purpose, but technological improvements are still required (current scanners have resolutions in the range of 4–5 mm)., [Results] The main goal of this work is to improve state-of-the-art PCa imaging and diagnosis. We have focused our efforts on the design of a novel prostate-dedicated PET scanner, named ProsPET. This system has small scanner dimensions defined by a ring of just 41 cm inner diameter. In this work, we report the design, implementation, and evaluation (both through simulations and real data) of the ProsPET scanner. We have been able to achieve < 2 mm resolution in reconstructed images and high sensitivity. In addition, we have included a comparison with the Philips Gemini-TF scanner, which is used for routine imaging of PCa patients. The ProsPET exhibits better contrast, especially for rod sizes as small as 4.5 mm in diameter. Finally, we also show the first reconstructed image of a PCa patient acquired with the ProsPET., [Conclusions] We have designed and built a prostate specific PET system, with a small footprint and improved spatial resolution when compared to conventional whole-body PET scanners. The gamma ray impact within each detector block includes accurate DOI determination, correcting for the parallax error. The potential role of combined organ-dedicated prostate-specific membrane antigen (PSMA) PET and ultrasound devices, as a prebiopsy diagnostic tool, could be used to guide sampling of the most aggressive sites in the prostate., The work presented in this article has been partially funded by a research grant from the regional government of the Comunitat Valenciana (Spain), co-funded by the European Union ERDF funds (European Regional Development Fund) of the Comunitat Valenciana 2014-2020, with reference IDIFEDER/2018/032 (High-Performance Algorithms for the Modelling, Simulation and early Detection of diseases in Personalized Medicine). This project has also received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No 695536). It has also been supported by the EU Grant 603002 under the FP7 program and by the Spanish Ministerio de Economía, Industria y Competitividad under Grant e and through PROSPET (DTS15/00152) funded by the Ministerio de Economia y Competitividad., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Calibration of Gamma Ray Impacts in Monolithic-Based Detectors Using Voronoi Diagrams

  • Freire, Marta
  • González Montoro, Andrea
  • Sánchez, Filomeno
  • Benlloch Baviera, José María
  • González Martínez, Antonio Javier
Molecular imaging systems, such as positron emission tomography (PET), use detectors providing energy and a 3-D interaction position of a gamma ray within a scintillation block. Monolithic crystals are becoming an alternative to crystal arrays in PET. However, calibration processes are required to correct for nonuniformities, mainly produced by the truncation of the scintillation light distribution at the edges. We propose a calibration method based on the Voronoi diagrams. We have used 50 × 50 × 15 mm3 LYSO blocks coupled to a 12 × 12 SiPMs array. We have first studied two different interpolation algorithms: 1) weighted average method (WAM) and 2) natural neighbor (NN). We have compared them with an existing calibration based on 1-D monomials. Here, the crystal was laterally black painted and a retroreflector (RR) layer added to the entrance face. The NN exhibited the best results in terms of XY impact position, depth of Interaction, and energy, allowing us to calibrate the whole scintillation volume. Later, the NN interpolation has been tested against different crystal surface treatments, allowing always to correct edge effects. Best energy resolutions were observed when using the reflective layers (12%- 14%). However, better linearity was observed with the treatments using black paint. In particular, we obtained the best overall performance when lateral black paint is combined with the RR., This work was supported in part by the European Research Council through the European Union’s Horizon 2020 Research and Innovation Program under Grant 695536, and in part by the Spanish Ministerio de Economía, Industria y Competitividad under Grant TEC2016-79884-C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Single-Ended Readout PET Detector Based on Pixelated Crystals With TOF and DOI Capabilities

  • Cucarella, Neus
  • Barrio Toala, J.
  • Sánchez, David
  • Benlloch, José María
  • González, Antonio J.
Traditional PET detectors based on pixelated scintillation crystals with single-ended readout do not provide depth of interaction (DOI) information in an easy and cost-effective way. In this work, we propose a PET detector with single-ended readout and 1:1 coupling, based on arrays of naked pixelated crystals that are glued in one direction, and optically separated in the other one. We have named this approach as pseudo-slab. In this configuration, some of the optical photons will propagate in the glued direction, generating a light distribution from which DOI information can be retrieved. We have characterized four different detector configurations, all of them consisting of a linear array of 1×8 LYSO crystals of 3×3×20 mm3 each, with an optical glue of approximately 70 μ m in between them. The top and bottom faces are polished, and with a different number of unpolished lateral surfaces (2 versus 4) and different wrappings (Enhanced Specular Reflector versus BaSO4). The results obtained for the four detector configurations show energy resolutions ranging from 8.5% to 9.8% and coincidence time resolutions (with a reference pixel) below 290 ps for all cases using only the fastest timestamp and close to 230 ps when energy-weighted averaging of multiple timestamps is applied (corresponding to 182 ps detector time resolution). Regarding DOI performance, all configurations provide DOI information, showing a better performance with more number of unpolished faces and also when using BaSO4 as a reflector., This work was supported by the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program under Grant 695536. The work of Neus Cucarella was supported by the Ministerio de Ciencia e Innovación under Grant PTA2022- 022459-I (technician grant). The work of David Sanchez was supported by Generalitat Valenciana under Grant CIAPOS/2021/263 (postdoctoral grant). (Corresponding author: Neus Cucarella.), Peer reviewed