Skip to main content

ESTRUCTURAS SUBWAVELENGTH PARA LA FOCALIZACION DE ULTRASONIDOS DE ALTA INTENSIDAD

BES-2016-077133

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Formación
Call Contratos Predoctorales
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sound Focusing Capability of a CO2 Gas-Filled Cuboid

  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Minin, O. V.
  • Minin, I. V.
[EN] The ability of focus waves with concave or convex surfaces is well known both in optics and in acoustics. Nowadays, the possibility of beamforming sound with flat lenses is a hot topic because of its application in different areas such as biomedical engineering or non-destructive techniques. In this paper, we propose a gas filled cuboid lens that has a different sound speed than that of the surrounding medium (air in our case) as a beamforming acoustic device. This constitutes an experimental visualization of the capability of sound focusing with flat surfaces lens and allows understanding the corresponding physic phenomenon., This work was financially supported by the Spanish MINECO through project TEC2015-70939-R and partially was carried out within the framework of the Tomsk Polytechnic University Competitiveness Enhancement Program, Russia. D.T.-S. acknowledges financial support from Ministerio de Ciencia, Innovacion y Universidades de Espana through grant BES-2016-077133.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tunable acoustic hooks from Janus cylinder

  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
[EN] In this paper we present a new way to obtain tunable acoustic hooks. The breaking of the symmetry of the material composition is used for the generation of acoustic hooks from Janus cylinders. This fact is possible by using sonic crystals to vary the refractive index of two half-cylinders. The study has been carried out numerically, using the Finite Element Method. By changing the contrast of refractive indexes between the two half-cylinders or by rotating the Janus cylinder, acoustic hooks can be obtained that can be tunable with bending angle ranging from 1 degrees to 21 degrees. Full Width at Half-Maximum can be obtained with values close to the diffraction limit. This structure provides an efficient method to precisely tune the acoustic hook depending on it use., This work has been supported by Spanish Ministry of Science, Innovation and Universities (grant No. RTI2018-100792-B-I00). D.T.-S. acknowledges financial support from Ministerio de Ciencia, Innovacion y Universidades de Espana through grant BES-2016-077133.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Transient Analysis of Fresnel Zone Plates for Ultrasound Focusing Applications

  • Pérez-López, Sergio
  • Dolmatov, Dimitry O.
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
[EN] Fresnel Zone Plates are planar lenses that can be used to focus ultrasound beams. This kind of acoustic lenses can play a key role in the resolution of ultrasonic NDT systems. In this type of pulse-echo applications, the pulse duration is an important parameter that specifies the axial resolution, and thus, shorter ultrasound pulses provide higher resolutions. However, acoustic lenses exhibit a transient response that should be considered when setting the pulse duration, as pulses shorter than the transient state duration result in degradation in the response of acoustic lenses in terms of focal intensity, focal displacement, and lateral and axial resolutions. In this work, a thorough analysis of the transient response of Fresnel Zone Plates is discussed, demonstrating that the transient state should be considered in order to achieve optimal focusing performance. Theoretical and numerical results are presented, showing very good agreement., This work has been supported by Spanish MICINN RTI2018-100792-B-I00 project, Generalitat Valenciana AICO/2020/139 and the Russian Governmental program "Science" project FSWW-2020-0014. The research is carried out within the framework of Tomsk Polytechnic University Competitiveness Enhancement Program grant VIU-MNOL NK 187/2020. S.P.-L. acknowledges financial support from Universitat Politècnica de València grant program PAID-01-18. D.T.-S. acknowledges financial support from MICINN BES-2016-07713 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Design, modelling, characterization and implementation of acoustic lenses for modulation of ultrasound beams.

  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
[ES] La capacidad de controlar y modificar los haces de energía ha sido motivo de investigación por parte de la comunidad científica desde largo tiempo atrás. En el campo de la acústica, este control energético de las ondas mecánicas tiene numerosas aplicaciones. Desde las aplicaciones industriales, alimentarias, farmacéuticas, etcétera hasta la biomedicina. Esta tesis se basa en la aplicación del control y modulación focal de los ultrasonidos para el uso en este último campo. Se puede modular y controlar los focos de ultrasonidos de diferentes formas. En este caso, se han desarrollado lentes planas que utilizan el principio de la difracción para lograr focalizar los haces. Las ventajas del uso de lentes planas de focalización permiten ser implementadas de forma sencilla en procesos de mecanización e incluso mediante impresión 3D. Se propone utilizar transductores planos que al emitir sobre una lente acústica, se produzca una conformación focal de características controladas. La lente conocida como lente de Fresnel (FZP) ha sido escogida como base de diseño en la implementación de las diferentes soluciones que logran cumplir con los objetivos marcados. Mediante la aplicación de modificaciones en una FZP se puede lograr pasar de una lente con capacidades extraordinarias de focalización a una lente capaz de controlar la resolución lateral y la profundidad de foco e incluso mejorar la ganancia. El objetivo final de aplicación es el uso en transductores de ultrasonidos de alta intensidad conocidos como HIFU. Mejorar la capacidad de resolución hace que se puedan desarrollar mejores terapias oncológicas que supongan un índice mayor de éxito en la lucha contra el cáncer. En la presente tesis se ha propuesto, además, una novedosa lente FZP basada en el cambio de fase que puede resultar un antes y un después en aplicaciones biomédicas. Se ha conseguido no solo mejorar la eficiencia de una FZP, sino que se ha conseguido implementar en materiales compatibles con resonancia magnética. Se han desarrollado modelos numéricos basados en el método de los elementos finitos que emulan la física involucrada. Las medidas han sido realizadas en condiciones controladas por un sistema robotizado de alta precisión. Todos los resultados obtenidos y publicados han sido desarrollados de forma numérica y experimental, validándose el método de trabajo y dando consistencia a las soluciones propuestas., [CA] La capacitat de controlar i modificar els feixos d'energia ha sigut motiu d'investigació per part de la comunitat científica des de llarg temps arrere. En el camp de l'acústica, este control energètic de les ones mecàniques té nombroses aplicacions. Des de les aplicacions industrials, alimentàries, farmacèutiques, etcètera fins la biomedicina. Esta tesi es basa en l'aplicació del control i modulació focal dels ultrasons per a l'ús en este últim camp. Es pot modular i controlar els focus d'ultrasons de diferents formes. En este cas, s'han desenvolupat lents planes que utilitzen el principi de la difracció per a aconseguir focalitzar els feixos. Els avantatges de l'ús de lents planes de focalització permeten ser implementades de forma senzilla en processos de mecanització i inclús per mitjà d'impressió 3D. Es proposa utilitzar transductores plans que a l'emetre sobre una lent acústica, es produïsca una conformació focal de característiques controlades. La lent coneguda com a lent de Fresnel (FZP) ha sigut triada com a base de disseny en la implementació de les diferents solucions que aconseguixen complir amb els objectius marcats. Per mitjà de l'aplicació de modificacions en una FZP es pot aconseguir passar d'una lent amb capacitats extraordinàries de focalització a una lent capaç de controlar la resolució lateral i la profunditat de focus i inclús millorar el guany. L'objectiu final d'aplicació és l'ús en transductores d'ultrasons d'alta intensitat coneguts com HIFU. Millorar la capacitat de resolució fa que es puguen desenvolupar millors teràpies oncològiques que suposen un índex major d'èxit en la lluita contra el càncer. En la present tesi s'ha proposat, a més, una nova lent FZP basada en el canvi de fase que pot resultar un abans i un després en aplicacions biomèdiques. S'ha aconseguit no sols millorar l'eficiència d'una FZP, sinó que s'ha aconseguit implementar en materials compatibles amb ressonància magnètica. S'han desenvolupat models numèrics basats en el mètode dels elements finits que emulen la física involucrada. Les mesures han sigut realitzades en condicions controlades per un sistema robotitzat d'alta precisió. Tots els resultats obtinguts i publicats han sigut desenvolupats de forma numèrica i experimental, validant-se el mètode de treball i donant consistència a les solucions proposades., [EN] The ability to control and modify energy beams has been the subject of research by the scientific community for a long time. In the acoustic field, this energetic control of mechanical waves has numerous applications. From industrial, food, pharmaceutical applications, et cetera, to biomedicine. This thesis is based on the ultrasound control and focal modulation applications. It is possible to modulate and control the ultrasound focii in different ways. In this case, flat lenses were developed based on the principle of diffraction to focus the beams. The advantages of using flat focusing lenses allow them to be easily implemented in machining and drilling processes and even through 3D printing. It was proposed to use planar transducers that when emitting on an acoustic lens, controlled characteristics of focal conformation were produced. The lens known as Fresnel Zone Plane (FZP) was chosen as the implementation design basis for the different solutions that manage to fulfill the objectives set. By applying modifications to an FZP it was possible to go from a lens with extraordinary focusing capabilities to a lens that was capable to control lateral resolution, depth of focus and even improving the gain. The final objective application was the use in high intensity ultrasound transducers known as HIFU. Improving the ability to resolve makes it possible to develop better cancer therapies that represent a higher rate of success in the fight against cancer. In the present thesis, a novel FZP lens based on phase change has also been proposed that can be a before and after in biomedical applications. It has not only been possible to improve the efficiency of an FZP, but it has also been possible to implement it in materials compatible with magnetic resonance imaging. Numerical models based on the finite element method were developed for emulating the involved physics. Measurements were carried out under controlled conditions by a high precision robotic system. All the results obtained and published were developed numerically and experimentally, validating the working method and giving consistency to the proposed solutions., I want to acknowledge the following public funding sources that have made possible this research: Grant BES-2016-077133 (Ministerio de Ciencia, Innovación y Universidades de España) Project TEC2015-70939-R (MINECO/FEDER). Tomsk Polytechnic University within the framework of Tomsk Polytechnic University Competitiveness Enhancement Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Acoustical hooks: A new subwavelength self-bending beam

  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Minin, Oleg V.
  • Minin, Igor V.
[EN] In this work, we report the first experimental observation of a new type of near-field curved acoustic beam confirmed by simulations. This new curved acoustical beam is generated by asymmetric distribution of the vortices in a polymer Janus particle (particle with broken symmetry) immersed in water. The origin of the vortices is in the conversion of an incident longitudinal wave mode to a shear wave in a solid and then back to a longitudinal wave in the water and has unique features, the radius of curvature of acoustical hook is less than the wavelength. Indeed, it is the smallest radius of curvature ever recorded for any acoustical beams. These results may be potentially useful when an object, located in the path of the beam, must be avoided. It could also have potential applications in particle manipulations., This work has been supported by Spanish Ministry of Science, Innovation and Universities (grant No. RTI2018-100792-B-I00). The research was partially supported by the Russian Foundation for Basic Research (Grant No. 20-57-S52001) and by Tomsk Polytechnic University Competitiveness Enhancement Program. D.T.-S. acknowledges financial support from MICINN BES-2016-07713 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cylindrical 3D printed confgurable ultrasonic lens for subwavelength focusing enhancement

  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Minin, Oleg V.
  • Minin, Igor V.
[EN] In this study, we report the characteristics of acoustic jets obtained through a mesoscale (radius less than 5 wavelengths) ABS cylinder made with a 3D printer. We have analyzed the influence of cylinder size on the characteristic parameters of an acoustic jet, such as maximum acoustic intensity at focus, Full Width at Half Maximum and length of Acoustic Jet. FWHM below 0.5 wavelength in AJ was experimentally obtained. It has been observed that there are two operating regimes depending on the cylinder radius: the resonant and the non-resonant. In the resonant regime, the excitation of Whispering Gallery Modes results in optimal parameter values of the acoustic jet. However, as it is a resonant regime, any minimal variation in cylinder size, working frequency or refractive index would make resonance disappear. In non-resonant mode, a phononic crystal has been embedded inside the cylinder and the characteristic parameters of the acoustic jet have been studied. These have been observed to improve. Finally, we have shown that curved acoustic jets can be obtained with the ABS cylinder with a phononic crystal embedded inside., This work has been supported by Spanish Ministry of Science, Innovation and Universities (Grant No. RTI2018100792-B-I00). The research was partially supported by Tomsk Polytechnic University Competitiveness Enhancement Program. D. T.-S. acknowledges financial support from Ministerio de Ciencia, Innovacion y Universidades de Espana through Grant BES-2016-077133.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

3D sound wave focusing by 2D internal periodic structure of 3D external cuboid shape

  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Tarrazó-Serrano, Daniel
  • Minin, Oleg V.
  • Minin, Igor V.
[EN] In this work, we report the focusing effect of a 2D sonic crystal cuboid. The proposed sonic composite lens is vertically extended from a 2-D flat Phononic Crystal Structure, but it is found to be able to focus waves in a three-dimensional manner. By varying the cuboid size, beam dimensions change and transverse beam width values smaller than the classical diffraction limit (~0.3 of wavelength) can be obtained. Numerical results have been obtained by Finite Element Method., This work has been supported by RTI2018-100792-B-I00 (MICINN) and was partially carried out within the framework of the Tomsk Polytechnic University Competitiveness Enhancement Program. D. T.-S. acknowledges financial support from Ministerio de Ciencia, Innovación y Universidades de España through grant BES-2016-077133.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bifocal Ultrasound Focusing Using Bi-Fresnel Zone Plate Lenses

  • Pérez-López, Sergio
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
[EN] In this work, we present a bifocal Fresnel zone plate (BiFZP) capable of generating focusing profiles with two different foci. The performance of the BiFZP is demonstrated in the ultrasound domain, with a very good agreement between the experimental measurements and the finite element method (FEM) simulations. This lens becomes an appealing alternative to other dual-focusing lenses,in which the foci location can only be set at a limited range of positions, such as M-bonacci zone plates. Moreover, the variation of the operating frequency has also been analyzed, providing an additional dynamic control parameter in this type of lenses., This work was supported by the Spanish MICINN RTI2018-100792-B-I00 project. S.P.-L. acknowledges financial support from the Universitat Politècnica de València grant program PAID-01-18. D.T.-S. acknowledges financial support from the MICINN BES-2016-07713 project.