Skip to main content

DESARROLLO Y EVALUACION DE NUEVAS MEMBRANAS POLIMERICAS REFORZADAS CON NANOFIBRAS PARA SU APLICACION EN PILAS DE COMBUSTIBLE CON ELEVADA ESTABILIDAD TERMICA

ENE2015-69203-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Diffusivity and free anion concentration of ionic liquid composite polybenzimidazole membranes

  • Barjola-Ruiz, Arturo
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Sahuquillo, Oscar|||0000-0001-5360-3743
  • Giménez Torres, Enrique|||0000-0002-6330-0209
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
  • Escorihuela, Jorge
[EN] In this article, PBI composite membranes containing the ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIM-NTf2) at 1, 5, 10, 20 and 50 wt% (named PBI-IL-x) have been prepared by a casting method. The internal morphology of the membranes was analyzed by scanning electron microscopy (SEM), revealing that the incorporation of IL promotes the formation of porous channels. Thermal and mechanical stability was confirmed by thermogravimetric analysis (TGA) and tensile test measurements. The ionic transport through membranes was analysed by means of electrochemical impedance spectroscopy (EIS), showing a dependence on the IL loading, reaching a highest conductivity value of 1.8 x 10(-2) S cm(-1) for the PBI-IL-50 membrane at 160 degrees C. The experimental results showed a Vogel-Fulcher-Tammann (VFT) type relation for the ionic conductivity with temperature and the calculated activation energies suggest that ionic conduction in the films can occur by both hopping and vehicle-type mechanisms. Eyring's absolute rate theory was also used to obtain activation enthalpy and entropy from the temperature dependence of the conductivity. Diffusivity and free ion number density were obtained by means of electrode polarization analysis to obtain more insight into the conduction in these composite membranes. Finally, the Debye length was calculated and related to both transport parameters., This work was sponsored by the Ministerio de Economia y Competitividad (MINECO) under the project ENE/2015-69203R. The authors acknowledge the Electron Microscopy Service from Universitat Politecnica de Valencia for the use of instruments and staff assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modification of polyetherimide membranes with ZIFs fillers for CO2 separation

  • Vega, J.
  • Andrio, A.
  • Lemus, A.A.
  • Díaz, J.A.I.
  • del Castillo, L.F.
  • Gavara, Rafael
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] Flat hybrid membranes composed of polyetherimide (PEI) as matrix and zeolitic imidazolate frameworks (ZIFs) as fillers at concentrations of 10 and 20 wt% were prepared. Apparent permeability coefficient and apparent diffusivity coefficient of gases (CO2 and N-2) for these hybrid membranes (PZIFs) were determined by the "timelag" method. The experimental conditions used were from 25 degrees C to 55 degrees C with pressures of 2, 3 and 5 bar. The PZIFs with fillers of ZIF-8 (PZ-Zn) and ZIF-67 (PZ-Co) showed apparent selectivities (alpha(pa(CO2)/pa(N2))) of 39.6 and 27.5, respectively, higher than the alpha(pa(CO2)/pa(N2)) of the reference membrane PEI, while the membrane with filler of ZIF-Mix (PZ-Zn/Co) showed the lowest alpha(pa(CO2)()/pa(N2)) selectivity of 10.3 in the membrane series (under conditions of 25 degrees C and 2 bar). It is proposed that the selectivity of the membrane series can be attributed to two critical factors: the particle size/distribution ratio in the polymer base and sorption of CO2 at local sites of the bimetallic mixture. On the other hand, gas permeation studies (O-2, CO2 and CH4, and CO2/CH(4 )and CO2/C2H4 mixtures), were carried out in the series of PZIFs membranes. Permeability data were obtained by an isostatic method based on a permeation cell connected in series to a gas chromatograph where the rate of permeated gases was analyzed until a stationary state was reached. The complementary characterization techniques were: scanning electron microscopy, thermogravimetric analysis, and powder X-ray diffraction, which support the existence of the amorphous/crystalline phases of the PZIFs., This research has been supported by the ENE/2015-69203-R project, granted by the Ministerio de Economia y Competitividad (MINECO), Spain; Also authors are grateful to UNAM-DGAPA-PAPIIT projects IG-100185, and IG-114818. This study was partially supported by the CONACyT (Mexico) projects 2013-05-231461 and CB -2014-01-235840.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High proton conductivity at low and moderate temperature in a simple family of Prussian blue analogs, divalent transition metal hexacyanocobaltates (III)

  • Vega-Moreno, J.
  • Lemus-Santana, A.A.
  • Reguera, E.
  • Andrio, A.
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] Proton conductivity behavior was studied in a family of hexacyanocobaltates with divalent transition metals (II), HCCMs. The HCCMs, with molecular formula M3[Co(CN)6]2-xH2O (where M = Ni, Co, Fe, Mn and Cd), had cubic crystal structures and similar cell parameters. The number of water molecules per formula unit (x) present in each HCCMs was determined from thermogravimetric analysis data. Differences in conductivity values were evaluated by running dielectric impedance experiments. The values of the permittivity and conductivity real and imaginary parts were obtained for each material. The actual conductivity part was analyzed as a temperature and frequency function. Mobilities, diffusivities, and ion charge densities were derived from the electrode polarization model that appropriately fits the loss tangent curves. The measurement conditions for all the samples were relative humidity of 99% and temperature ranging from 25 to 105 °C. The conductivity values obtained for the HCCMs varied from 10-4 to 10-2 S cm-1. At low temperatures, proton conductivity values for the nickel hexacyanocobaltate (HCCNi) stood out (from 10 -3 and 10-2 S cm-1, at 25 and 45°C, respectively), followed by Fe, Cd, Co and Mn. In addition to the results stated above, activation energies were determined using the Arrhenius model, where the obtained values were below 21.1 kJ mol-1. The proton transport activation energies suggest that the transport through the HCCM porous framework was achieved by the Grotthuss mechanism. The diffusivity in the porous framework increased with temperature for all the samples except for HCCNi, following the trend DHCCFe > DHCCMn> DHCCCo> DHCCCd. The variability observed between the samples could be related to the ion-binding energies (Eb). These results indicate that hexacyanocobaltates can be useful as mixed matrix membrane (MMM) fillers, providing excellent conductivity and diffusivity when the medium contains a sufficient amount of ionic components depending on the involved transition metal., This research has been supported by the ENE/2015-69203-R project, granted by the Ministerio de Economía y Competitividad (MINECO), Spain, also authors are grateful to UNAM-DGAPA-PAPIIT projects IG-100185, and IG-114818. This study was partially supported by the CONACyT (Mexico) projects 2013-05-231461 and CB-2014-01-235840. The authors appreciate the access to the experimental facility of the National Laboratory for Energy Conversion and Storage (CONACyT) to carry out the experimental study. The authors thank S. Vega from Mexican Institute of Petroleum (IMP) for reviewing and improving the English language of this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural and dielectric properties of Cobaltacarborane Composite Polybenzimidazole Membranes as solid polymer electrolytes at high temperature

  • Fuentes, I.
  • Andrio Balado, Andreu
  • Escorihuela Fuentes, Jorge
  • Viñas, Clara
  • Teixidor, F.
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] The conductivity of a series of composite membranes, based on polybenzimidazole (PBI) containing the metallacarborane salt M[Co(C2B9H11)(2)], M[COSANE] and tetraphenylborate, M[B(C6H5)(4)], M[TPB] both anions having the same number of atoms and the same negative charge, has been investigated. Different cations (M = H+, Li+ and Na+) have been studied and the composite membranes have been characterized by water uptake, swelling ratios, ATR FT-IR, thermogravimetric analysis and electrochemical impedance spectroscopy to explore the dielectric response and ion dynamics in composite membranes. Our results show that conductivity increases with increasing temperature and it is higher for H+ than for Li+ and Na+ for all temperatures under study. The mobility of Li+ is greater in [COSANE](-) than in [TPB](-) composite PBI@membranes while for Na+ it is the opposite. The temperature dependence of the conductivity of the composite was followed by a typical Arrhenius behaviour with two different regions: (1) between 20 and 100 degrees C, and (2) between 100 and 150 degrees C. Using the analysis of electrode polarization (EP) based on the Thrukhan theory we have calculated the ionic diffusion coefficients and the density of carriers. From the double logarithmic plot of the imaginary part of the conductivity (sigma '') versus frequency in the entire range of temperatures studied we have determined for each sample at each temperature, the frequency values of the onset (f(ON)) and full development of electrode polarization (f(MAX)), respectively, which permit us to calculate static permittivity., We gratefully acknowledge Spanish Ministerio de Economia y Competitividad (MINECO) for financial support by the ENE/2015-69203-R project and CTQ2016-75150-R project, and Generalitat de Catalunya (2014/SGR/149). I. Fuentes is enrolled in the PhD program of the UAB. The authors acknowledge Dr Oscar Sahuquillo for technical assistance in TGA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Recent Progress in the Development of Composite Membranes Based on Polybenzimidazole for High Temperature Proton Exchange Membrane (PEM) Fuel Cell Applications

  • Escorihuela, Jorge
  • Olvera-Mancilla, Jessica
  • Alexandrova, Larissa
  • del Castillo, L. Felipe
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] The rapid increasing of the population in combination with the emergence of new energy-consuming technologies has risen worldwide total energy consumption towards unprecedent values. Furthermore, fossil fuel reserves are running out very quickly and the polluting greenhouse gases emitted during their utilization need to be reduced. In this scenario, a few alternative energy sources have been proposed and, among these, proton exchange membrane (PEM) fuel cells are promising. Recently, polybenzimidazole-based polymers, featuring high chemical and thermal stability, in combination with fillers that can regulate the proton mobility, have attracted tremendous attention for their roles as PEMs in fuel cells. Recent advances in composite membranes based on polybenzimidazole (PBI) for high temperature PEM fuel cell applications are summarized and highlighted in this review. In addition, the challenges, future trends, and prospects of composite membranes based on PBI for solid electrolytes are also discussed., The authors acknowledge the Spanish Ministerio de Economía y Competitividad (MINECO) for the financial support under the project ENE/2015-69203-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of metallacarborane salt H[COSANE] doping on the performance properties of polybenzimidazole membranes for high temperature PEMFCs

  • Olvera-Mancilla, Jessica
  • Escorihuela, Jorge
  • Alexandrova, Larissa
  • Andrio, Andreu
  • Del Castillo, Luis Felipe
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] In this paper, a series of composite proton exchange membranes comprising a cobaltacarborane protonated H[Co(C2B9H11)(2)] named (H[COSANE]) and polybenzimidazole (PBI) for a high temperature proton exchange membrane fuel cell (PEMFC) is reported, with the aim of enhancing the proton conductivity of PBI membranes doped with phosphoric acid. The effects of the anion [Co(C2B9H11)(2)] concentration in three different polymeric matrices based on the PBI structure, poly(2,2 '-(m-phenylene)-5,5 '-bibenzimidazole) (PBI-1), poly[2,2 '-(p-oxydiphenylene)-5,5 '-bibenzimidazole] (PBI-2) and poly(2,2 '-(p-hexafluoroisopropylidene)-5,5 '-bibenzimidazole) (PBI-3), have been investigated. The conductivity, diffusivity and mobility are greater in the composite membrane poly(2,2 '-(p-hexafluoroisopropylidene)-5,5 '-bibenzimidazole) containing fluorinated groups, reaching a maximum when the amount of H[COSANE] was 15%. In general, all the prepared membranes displayed excellent and tunable properties as conducting materials, with conductivities higher than 0.03 S cm(-1)above 140 degrees C. From an analysis of electrode polarization (EP) the proton diffusion coefficients and mobility have been calculated., This work was financially supported by the Ministerio de Economia y Competitividad (MINECO) under project ENE/2015-69203-R and by Consejo Nacional de Ciencia y Tecnologia (CONACyT) for the postdoctoral grant to J. O. The technical support of Servei de Microscpia Electrnica at Universitat Politecnica de Valencia and Servei Central d'Instrumentacio Cientifica at Universitat Jaume I is gratefully acknowledged. The authors thanks Prof. Santiago V. Luis (from Universitat Jaume I) and Dr Isabel Fuentes, Prof. Francesc Teixidor and Prof. Clara Vinas (from Instituto de Materiales de Barcelona, CSIC), for supplying the H[COSANE] compound.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis and characterization of organic agar-based membranes for microbial fuel cells

  • Hernández-Flores, Giovanni
  • Andrio, Andreu
  • Solorza-Feria, Omar
  • Poggi-Varaldo, Hector Mario
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] The goal of this work was the synthesis and characterization of agar membranes for microbial fuel cells applications. Three sets of membranes were synthesized. For a first set of membranes (2, 4, 6, and 8 wt% agar concentration), both proton conductivity (sigma) and O-2 permeability (OP) increased as a function of agar concentration, up to 4 wt% agar. Beyond this concentration, the a levelled-off at 2.43 mS cm(-1) and OP increased. A second one set was obtaining by mixing 2, 4, 6, and 8 wt% concentrations of agar with KC110 wt%. Both a and OP increased as a function of increased agar concentration; nevertheless, the presence of KCl slightly affected in a negative way the OP. For the last set, agar concentration was fixed at 2 wt%, while KCl concentration was increased to 2, 4, 6, 8, and 10 wt%. The a did not significantly increase with salt concentration and the worst values of OP were observed. It was thus confirmed that agar concentration plays a significant role in the increase of a, but KCl does not improve membrane performance. Moreover, the agar membranes cost is two orders of magnitude lower than Nafion (R) 117. Therefore, the best membranes were those produced solely with agar., The authors gratefully acknowledge the support provided by CONACYT, Mexico and Mr. Adrian Velazquez for the English revision of this work. Giovanni Hernandez Flores expresses his acknowledgements for his graduate scholarship. Partial financial support was provided by CINVESTAV-IPN and the Ministerio de Economia y Competitividad (MINECO), Spain, through project ENE/2015-69203-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Proton Exchange Membrane Fuel Cells (PEMFCs): Advances and Challenges

  • Tellez-Cruz, Miriam M.
  • Escorihuela, Jorge
  • Solorza-Feria, Omar
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] The study of the electrochemical catalyst conversion of renewable electricity and carbon oxides into chemical fuels attracts a great deal of attention by different researchers. The main role of this process is in mitigating the worldwide energy crisis through a closed technological carbon cycle, where chemical fuels, such as hydrogen, are stored and reconverted to electricity via electrochemical reaction processes in fuel cells. The scientific community focuses its efforts on the development of high-performance polymeric membranes together with nanomaterials with high catalytic activity and stability in order to reduce the platinum group metal applied as a cathode to build stacks of proton exchange membrane fuel cells (PEMFCs) to work at low and moderate temperatures. The design of new conductive membranes and nanoparticles (NPs) whose morphology directly affects their catalytic properties is of utmost importance. Nanoparticle morphologies, like cubes, octahedrons, icosahedrons, bipyramids, plates, and polyhedrons, among others, are widely studied for catalysis applications. The recent progress around the high catalytic activity has focused on the stabilizing agents and their potential impact on nanomaterial synthesis to induce changes in the morphology of NPs., This work was financially supported by the Ministerio de Economía y Competitividad (MINECO) under project ENE/2015-69203-R. Dr. Omar Solorza-Feria gratefully acknowledges the financial support provided by the Mexican National Council for Science and Technology (Consejo Nacional de Ciencia y Tecnología), CONACYT, through the CONACYT-SENER Energy Sustainability grant 245920.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Free ion diffusivity and charge concentration on cross-linked Polymeric Ionic Liquid iongels films based on sulfonated zwitterion salts and Lithium ions

  • Valverde, D.
  • Andrio Balado, Andreu
  • Garcia-Verdugo, Eduardo
  • Luis Lafuente, Santiago
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] The properties of various mixtures of a zwitterionic ionic liquid (ZIs-1) and LiNTf 2, including their conductivity, have been studied showing how they can be adjusted through their molar composition. Conductivity tends to increase with the LiNTf2 content although it presents a minimum at the region close to the eutectic point. These mixtures also provide excellent features as liquid phases for the preparation of composite materials based on crosslinked PILs. The prepared films display excellent and tuneable properties as conducting materials, with conductivities that can be higher than 10 2 S cm 1 above 100 1C. The selected polymeric compositions show very good mechanical properties and thermal stability, even for low crosslinking degrees, along with a suitable flexibility and good transparency. The final properties of the films correlate with the composition of the monomeric mixture used and with that of the ZIs-1:LiNTf2 mixture., Financial support has been provided by MINECO (ENE/2015-69203-R and RTI2018-098233-B-C22) and Generalitat Valenciana (PROMETEO/2016/071). Technical support from the SECIC of the UJI is also acknowledged. DV thanks UNED (Costa Rica) for a predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of the anion on diffusivity and mobility of ionic liquids composite polybenzimidazol membranes

  • Compañ Moreno, Vicente|||0000-0001-8233-7472
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Escorihuela Fuentes, Jorge
  • Olvera, Jessica
  • ANDRIO, ANDREU
[EN] The study of proton conductivity processes has received increasing attention in the past decades due to their potential applications in fields such as electrochemical devices and fuel cells. Despite the high number of composite membranes which have been described for this purpose, fundamental studies of the conduction phenomena in polymeric membranes are scarce. In this article, we study on the effect of the anion on ionic conductivity of ionic liquid composite polybenzimidazole (PBI) membranes. These membranes, which contain 1-butyl-3-methylimidazolium (BMIM) with different counterions ([Cl]-, [NCS]-, [NTf2]- and [BF4]-) were analyzed by electrochemical impedance spectroscopy (EIS) in order to study the influence of the anion on the ionic conductivity, but also mobility and charge carrier density at different temperatures. The methodology for this analysis is based on the Coelho model of electrode polarization (EP), where the dependence of the complex dielectric permittivity on frequency is represented in terms of a Cole-Cole function, contrarily to the generally used simple Debye relaxation. The calculated activation energies associated to the conductivity showed a dependence on the anion and is around 65-84 kJ mol-1, which suggests that the ionic conductivity mainly occurs through the vehicle-type mechanism. The calculated diffusivity values followed the trend D NTf2 > D Cl > D BF4> D SCN, with an associated activation energy (in kJ·mol¿1) following the trend Eact(NTf2) = 10.9 < Eact(Cl) = 12.6 < Eact(BF4) = 18.5 < Eact(SCN) = 25.1. The comparison between these values reveals that a decrease in the ion binding energies (Eb) and stabilization energies (Es) could be responsible for the growth of the diffusion coefficient around one or two orders of magnitude depending on temperature and anion. The low stabilization energy observed for the NTF2- and Cl- anions in comparison with NCS- and BF4, can be attributed to the poor stabilization of separated ion pairs by coordination with the PBI segments, which is reflected in the values of the dielectric permittivity (es) calculated by EIS., This work was financially supported by the Ministerio de Economia y Competitividad (MINECO) under project ENE2015-69203-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Deep Insight into Different Acidic Additives as Doping Agents for Enhancing Proton Conductivity on Polybenzimidazole Membranes

  • Escorihuela, Jorge
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] The use of phosphoric acid doped polybenzimidazole (PBI) membranes for fuel cell applications has been extensively studied in the past decades. In this article, we present a systematic study of the physicochemical properties and proton conductivity of PBI membranes doped with the commonly used phosphoric acid at different concentrations (0.1, 1, and 14 M), and with other alternative acids such as phytic acid (0.075 M) and phosphotungstic acid (HPW, 0.1 M). The use of these three acids was reflected in the formation of channels in the polymeric network as observed by cross-section SEM images. The acid doping enhanced proton conductivity of PBI membranes and, after doping, these conducting materials maintained their mechanical properties and thermal stability for their application as proton exchange membrane fuel cells, capable of operating at intermediate or high temperatures. Under doping with similar acidic concentrations, membranes with phytic acid displayed a superior conducting behavior when compared to doping with phosphoric acid or phosphotungstic acid., This research was funded by the Spanish Ministerio de Economia y Competitividad (MINECO) under the project ENE/2015-69203-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Proton Conductivity through Polybenzimidazole Composite Membranes Containing Silica Nanofiber Mats

  • Escorihuela, Jorge
  • Andrio, Andreu
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Montero Reguera, Álvaro Enrique|||0000-0002-4165-4743
  • Sahuquillo, Oscar|||0000-0001-5360-3743
  • Giménez Torres, Enrique|||0000-0002-6330-0209
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] The quest for sustainable and more efficient energy-converting devices has been the focus of researchers 0 efforts in the past decades. In this study, SiO2 nanofiber mats were fabricated through an electrospinning process and later functionalized using silane chemistry to introduce different polar groups OH (neutral), SO3H (acidic) and NH2 (basic). The modified nanofiber mats were embedded in PBI to fabricate mixed matrix membranes. The incorporation of these nanofiber mats in the PBI matrix showed an improvement in the chemical and thermal stability of the composite membranes. Proton conduction measurements show that PBI composite membranes containing nanofiber mats with basic groups showed higher proton conductivities, reaching values as high as 4 mS.cm(-1) at 200 degrees C., This research was funded by the Spanish Ministerio de Economia y Competitividad (MINECO) for the financial support, grant number ENE/2015-69203-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dual Purpose Measurements with Displacement Sensors

  • Andrio, Andreu
  • del Castillo, Luis Felipe
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] In this paper we show a laboratory experience describing the possibility to build a sensor using a coil to measure small thicknesses of materials with the possibility of measuring temperature simultaneously, with the same built sensor. Its operation is based on the following facts: An electric current (a.c), flows through a coil and a magnetic field appears producing self-induction characterized by an electromotive force induced in the coil, when a conductive piece is situated in front of the coil. That permits us to obtain information about the distance between the coil and the conductive piece. When this separation thickness is changing, the magnetic field around the coil changes, because the self-induction coefficient (L) is also changing. Using resistance and impedance measurements (voltage in our case) in the coil, an expression has been obtained for the determination of the thickness of a non-conductive sheet placed between a metallic plate and the coil. Calibration measurements of resistance with temperature have been obtained. The thermodynamic analysis is also presented showing the equation of state of the system between the voltage, temperature and the thickness of the non-conductive sample. The linear thermal-expansion coefficient of the sample is also determined., The authors gratefully acknowledge the support provided by the projects ENE/2015-69203-R from Ministerio de Economia y Competitividad (MINECO) (Spain), and DGAPA-PAPIIT IG100618 and DGAPA-PAPIIT IN-114818 (México) and also thanks to Raúl Reyes Ortíz and Alberto López Vivas for technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental and computational study of conductivity of multilayer graphene in polypropylene nanocomposites

  • del Castillo, Roxana M.
  • del Castillo, Luis F.
  • Calles, Alipio G.
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] We study the electric conductivity of compounds formed by multilayer graphene in polypropylene. Our study makes a comparative analysis between the experimental and computational results. To obtain an experimental measurement of the electronic properties, we deposited multilayer graphene (MLG) nanoparticles over a polypropylene matrix. The deposition was made over several stages, in which we added to the polymer matrix different percentages of MLG nanoparticles using the melt compounding technique, and we studied the conductivities of the nanocomposites by means of electrochemical impedance spectroscopy (EIS). The second part consists of computational calculations, in which we studied the electronic properties of a graphene sheet under a polypropylene molecule with different slabs in the monomer. In both analyses, there is a strong percolation phenomenon with a percolation threshold of around 18% of the MLG nanoparticles. Before the percolation threshold, the charge carriers are constrained in the polypropylene molecule, making the system an insulating material and creating p-type doping. After the percolation threshold, the charge carriers are constrained in the graphene, making the system a conductor material and creating n-type doping with conductivity values of around 20 S m(-1). This phenomenon is a consequence of a change in the mechanism of charge transfer in the interface between the polypropylene molecule and graphene sheet. To describe the charge transfer mechanism, it is necessary to consider the quantum effect. The incorporation of the quantum effects and the percolation phenomenon make it possible for the theoretical conductivity to be close to the conductivity measured experimentally., This research has been supported by the ENE/2015-69203-R project, granted by the Ministerio de Economia y Competitividad (MINECO), Spain. Also, the authors are grateful to UNAM-DGAPA-PAPIIT projects IG 100618 y IG 114818, DGTIC-UNAM for access to the Miztli-UNAM supercomputer LANCAD-UNAM-DGTIC-055, and UNAM-DGAPA for the Postdoctoral grant for Roxana M. del Castillo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Membranas poliméricas de intercambio iónico con aplicación en pilas de combustible de temperatura intermedia

  • Barjola-Ruiz, Arturo
[ES] El desarrollo de membranas poliméricas capaces de actuar como electrolito en pilas de combustible tipo PEMFC a temperaturas intermedias constituye uno de los principales retos para conseguir la generación eficiente de energía por medio de estos dispositivos. Actualmente, las membranas basadas en polímeros perfluorosulfonados como el Nafion® son las más extendidas en pilas de combustible, ya que presentan una buena conductividad protónica además de ser estables mecánica y químicamente. Sin embargo, este tipo de membranas no son capaces de ofrecer buenos rendimientos por encima de 80 ¿C. En este sentido, el objetivo fundamental de esta tesis ha sido la síntesis y caracterización de membranas poliméricas que permitan su potencial utilización en el rango de temperaturas intermedias, por encima de 100 ¿C, donde la cinética de los electrodos y el transporte de protones a través de la membrana mejoran considerablemente, aumentando con ello el rendimiento de la celda. La investigación llevada a cabo se ha centrado en dos tipos de polímeros: poli(eter-eter-cetona) sulfonada (SPEEK) y polibencimidazol (PBI). Las membranas basadas en SPEEK ofrecen una elevada conductividad protónica y una buena estabilidad tanto mecánica como química. Si bien, estas propiedades dependen drásticamente de su grado de sulfonación. Así, altos grados de sulfonación resultan en muy buenas conductividades protónicas, aunque por el contrario, originan un excesivo hinchamiento de las membranas provocando un empeoramiento de sus propiedades mecánicas. Además, cuando la temperatura supera los 80 ¿C su conductividad disminuye debido a la deshidratación de la membrana. La estrategia seguida en este caso para mantener las propiedades mecánicas y la conductividad de las membranas basadas en SPEEK a temperaturas intermedias ha consistido en utilizar un polímero con un índice de intercambio catiónico no excesivamente alto (1.75 meq g-1), el cual ha sido dopado con dos tipos de compuestos organometálicos diferentes de tipo ZIF (Zeolitic Imidazolate Framework ) y con una mezcla de ambos. Este tipo de compuestos constituyen una subclase de los conocidos como Metal Organic Framework (MOF), los cuales adoptan una estructura tipo zeolita donde la parte orgánica está constituida por un anillo de imidazol y el nodo inorgánico es un metal. En este caso Zinc para el Z8 y Cobalto para el Z67. Las membranas compuestas SPEEK-ZIF mejoraron claramente las prestaciones de las de SPEEK puro a temperaturas intermedias. En base a los resultados anteriores, se seleccionaron las membranas dopadas con ZIF-67 para su evaluación en monocelda donde ofrecieron valores superiores a los de las membranas de SPEEK puro sin la adición de cargas y a los obtenidos con membranas de Nafion®117 a temperaturas superiores a 100 °C. En el caso de las membranas en base PBI, estas han sido capaces de ofrecer valores elevados de conductividad a altas temperaturas cuando eran dopadas con ácido fosfórico. Sin embargo, la pérdida del ácido por parte de la membrana (leaching) con el tiempo de operación y la degradación que este ácido provoca en los componentes de la celda, hacen que sea necesaria la utilización de otros agentes dopantes no volátiles y menos agresivos capaces de aportar al polímero la conductividad de la que carece. Los líquidos iónicos son sales fundidas a temperatura ambiente que poseen presiones de vapor despreciables y ofrecen buenas conductividades a temperaturas elevadas. En esta tesis, se prepararon por el método de casting, membranas de PBI conteniendo el líquido iónico 1-butil-3-metil imidazolio bis(trifluorometil sulfonil) imida (BMIM-NTf2) en diferentes porcentajes. Estas membranas alcanzaron a partir de un 10 % wt. de líquido iónico un valor de conductividad del orden de 10-2 S cm-1 a 160 ¿C. Señalando su potencial como electrolito polimérico basado en PBI libre de ácido fosfórico., [CA] El desenvolupament de membranes polimèriques vàlides per a actuar com a electròlit en piles de combustible tipus PEMFC a temperatures intermèdies. Constitueix un dels reptes principals per aconseguir la generació eficient d'energia amb aquests dispositius. Actualment, les membranes basades en polímers perfluorosulfonats com el Nafion® són les més utilitzades en piles de combustible, ja que presenten una bona conductivitat protònica a més de tindre una bona estabilitat química i mecànica. Tot i això, aquest tipus de membranes no oferixen bons rendiments a temperaturas superiors a 80 ¿C. En aquest sentit, l'objectiu fonamental d'aquesta tesi ha segut la síntesi i caracterització de membranes polimèriques amb les característiques adequades per poder treballar a temperatures intermèdies, per damunt de 100 ¿C. En aquestes condicions la cinètica dels elèctrodes i el transport de protons a través de la membrana milloren considerablement augmentant amb això el rendiment de la cel·la. La investigació duta a terme s'ha centrat en dos tipus de polímers: poli(eter-eter-cetona) sulfonada (SPEEK) i polibencimidazol (PBI). Les membranes basades en SPEEK ofereixen una elevada conductivitat protònica i una bona estabilitat tant mecànica com a química. No obstant això, aquestes caracteristiques depenen dràsticament del seu grau de sulfonació. Així, alts graus de sulfonació resulten en molt bones conductivitats protòniques. Encara que per contra, originen un excessiu unflament de les membranes en aigua calenta provocant un empitjorament de les seves propietats mecàniques. A més, quan la temperatura supera els 80 ¿C la seva conductivitat baixa a causa de la deshidratació de la membrana. L'estratègia seguida en aquest cas per mantenir les propietats mecàniques i la conductivitat de les membranes basades en SPEEK a temperatures intermèdies. Ha segut partir d'un polímer amb un índex d'intercanvi catiònic no gaire alt (1.75 meq g-1). El qual ha segut dopat amb dos tipus de compostos órganometàl.lics diferents de tipus ZIF (Zeolitic Imidazolate Framework) (ZIF) i amb una barreja de tots dos. Aquest tipus de compostos constitueixen una subclasse dels coneguts com a Metal Organic Framework (MOF). Els quals adopten una estructura tipus zeolita on la part orgànica està constituïda per un anell d'imidazol i el node inorgànic és el metall. En aquest cas Zinc per al Z8 i Cobalt per al Z67. Les membranes compostes SPEEK-ZIF van millorar clarament les prestacions de les de SPEEK pur a temperatures intermèdies. En base als resultats anteriors es van seleccionar les membranes dopades amb ZIF-67 per a la seva avaluació en monocel·la on van oferir valors superiors als de les membranes de SPEEK pur sense l'addició de càrregues i als obtinguts amb membranes de Nafion®117 en les mateixes condicions a temperatures superiors a 100 °C. En el cas de les membranes en base PBI, aquestes han oferit valors elevats de conductivitat a altes temperatures, quan han segut dopades amb àcid fosfòric. Tot i això, la pèrdua de l'àcid per part de la membrana (leaching) amb el temps d'operació i la degradació que aquest àcid provoca en els components de la cel·la, fan que siga necessària la utilització d'altres agents dopants no volàtils i menys agressius capaços d'aportar al polímer conductivitat iònica. Els líquids iònics són sals foses a temperatura ambient que tenen pressions de vapor molt febles i ofereixen bones conductivitats a temperatures elevades. En aquesta tesi es van preparar pel mètode de càsting, membranes de PBI contenint el líquid iònic 1-butil-3-metil imidazoli bis(trifluorometil sulfonil) imida (BMIM-NTf2) en diferents percentatges. Aquestes membranes van assolir a partir d'un 10% wt. de líquid iònic un valor de conductivitat de l'ordre de 10-2 S cm-1 a 160 ¿C. Assenyalant el seu potencial com a electròlit polimèric basat en PBI lliure d'àcid fosfòric., [EN] The development of polymeric membranes capable of acting as an electrolyte in a proton exchange membrane fuel cells (PEMFC) at intermediate temperatures. It constitutes one of the main challenges to achieve efficient energy generation through these kinds of devices. Currently, membranes based on perfluorosulfonated polymers such as Nafion® are the most widespread in fuel cells, since they have good proton conductivity as well as being mechanically and chemically stable. However, these types of membranes are not capable of offering good performance above 80 ¿C. In this sense, the main objective of this thesis has been the synthesis and characterization of polymeric membranes with potential use in the range of intermediate temperatures, above 100 ¿C, where the kinetics of the electrodes and the transport of protons through of the membrane and the performance of the cell are greatly improved. The research carried out has focused on two types of polymers: sulfonated poly(ether-ether-ketone) (SPEEK) and polybenzimidazole (PBI). SPEEK-based membranes offer high proton conductivity and good mechanical and chemical stability. However, their properties depend dramatically on its degree of sulfonation. Thus, high degrees of sulfonation result in excellent proton conductivities. On the other hand, the large amount of sulphonic groups in the membrane cause an excessive swelling in hot water, leading to a worsening of their mechanical properties, even reaching its dissolution. Furthermore, as also happens with perfluorosulfonated membranes, when the temperature is increased above 80 ¿C their proton conductivity decreases due to membrane dehydration. Focused on maintain the mechanical properties and conductivity of SPEEK-based membranes at intermediate temperatures. Membranes have been prepared from a polymer with a not excessively high cation exchange rate (1.75 meq g-1). Which has been doped with two different ZIF-type (Zeolitic Imidazolate Framework) organometallic compounds and with a mixture of both. This type of compounds constitutes a subclass of those known as Metal Organic Framework (MOF). Which adopt a zeolite-type structure where the organic part is made up of an imidazole ring and the inorganic node is the metal. In this case Zinc for Z8 and Cobalt for Z67. SPEEK-ZIF. Composite membranes clearly improved the performance of pure SPEEK membranes at intermediate tempe-ratures. Based on the previous results, the membranes doped with ZIF-67 were selected for their evaluation in a single fuel cell, where they offered higher values than those of the pure SPEEK membranes without the addition of fillers and those obtained with membranes of Nafion®117 under the same conditions at temperatures above 100 °C. PBI based membranes, have been capable of offering high conductivity values at high temperatures, when they have been doped with phosphoric acid. However, the loss of acid by the membrane (leaching) with the operation time and the degradation that this acid causes in the cell components. In this sense, it is necessary to explore the use of other non-volatile and less aggressive doping agents capable of providing ionic conductivity to the polymer. Ionic liquids are molten salts at room temperature that have negligible vapor pressures and offer good conductivities at elevated temperatures. In this thesis, PBI membranes containing the ionic liquid 1-butyl-3-methyl imidazolium bis(trifluoromethyl sulfonyl)imide (BMIM-NTf2) at different percentages were prepared by the casting method. These membranes containing 10 wt.% of ionic liquid reached a conductivity value in the range of 10-2 S cm-1 at 160 ¿C. Noting its potential as a phosphoric acid-free PBI-based polymeric electrolyte., This work was sponsored by the Ministerio de Economia y Competitividad (MINECO) under the project ENE/2015-69203-R. The authors acknowledge the Electron Microscopy Service from Universitat Politècnica de València for the use of instruments and staff assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Conductivity study of Zeolitic Imidazolate Frameworks, Tetrabutylammonium hydroxide doped with Zeolitic Imidazolate Frameworks, and mixed matrix membranes of Polyetherimide/Tetrabutylammonium hydroxide doped with Zeolitic Imidazolate Frameworks for proton conducting applications

  • Vega, J.
  • Andrio, A.
  • Lemus, A. A.
  • del Castillo, L. F.
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] ZIF-8 (Z8), ZIF-67 (Z67), and ZMix, a Zn/Co bimetallic zeolitic imidazolate framework (ZIF), were synthesized and doped with tetrabutylammonium hydroxide (ZIFsT). The obtained powders were used as fillers for polyetherimide (PEI) at a concentration of 20 wt %. The presence of the three ZIFsT in the polymeric matrix enhanced proton transport relative to that observed for PEI or ZIFs alone. The real and imaginary parts of the complex conductivity were obtained for each of the six materials, and the temperature and frequency dependence of the real part was analyzed. The results at different temperatures show that the dc-conductivity are about three orders of magnitude higher for the doped ZIFsT materials than for the PEI/ZIFsT membranes. In addition, the conductivity of the PEI/ZIFsT membranes increases five or six times when the temperature is changed from 25 °C to 55 °C. For these materials, the conductivity measurements have a linear dependency with frequency, which allowed for the creation of a master curve. It was also found that the PEI/ZMixT membrane activation energy is four times smaller than that of PEI/Z8T membranes and five times smaller than that of PEI/Z67T. Similarly, the real and imaginary parts of the complex dielectric constant were obtained, and the tan ¿ was evaluated. Using this value, the diffusion coefficient and the charge carrier density were obtained. A discussion of the proton transport mechanism through the membrane is given, and a comparison of this work with those on similar electrolyte membranes is included., This research has been supported by the ENE/2015-69203-R project, granted by the Ministerio de Economia y Competitividad (MINECO), Spain, and grants from National Mexican Council for Science and Technology for the scholarships of Ph.D. No. 356825 and mixed scholarship 2015 - MZO2016-mobility in the foreigner granted to Jesus Vega Moreno registered scholarship holder number 256015. Thanks to the CONACYT Program for the fellowship at the Universidad Politecnica de Valencia (UPV) and Universitat Jaume I that PhD student Jesus Vega used to carry out the experimental studies of this work. DGAPA-PAPIIT IG-100315.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Polymer-modified sulfonated PEEK ionomer membranes and the use of Ru3Pd6Pt as cathode catalyst for H2/O2 fuel cells

  • Martínez-Casillas, Diana
  • Solorza, Omar
  • Mollá Romano, Sergio
  • Montero Reguera, Álvaro Enrique|||0000-0002-4165-4743
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] Nanocomposite membranes incorporating electrospun nanofibers of SPEEK, blended with 30 wt% PVB within a water-based matrix of SPEEK with 35 wt% PVA using water as solvent, were prepared and characterized for their application as Polymer Electrolyte Membrane Fuel Cells (PEMFCs) in H-2/O-2 operating at low temperatures. Compared with a dense bulk phase, an improvement of proton conductivity in the SPEEK-30PVB nanofiber framework was observed. The incorporation of the SPEEK-30PVB nanofibers provides mechanical improvement while the matrix phase of SPEEK-35PVA emphasizes the proton conductivity at crosslinking temperatures up to 140 degrees C. PEMFC performance tests showed promising results for the use of these novel low cost membranes. The nanocomposite membrane reached a power density which is 25% higher than that of Nafion117 membranes with MEAs constructed with Pt loading in anode and in cathode. However, when the Pt of the cathode is substituted by Ru3Pd6Pt, the power density is lower in Nafion117 MEAs than in the nanocomposite. When used commercial Pt-carbon cloth (Pt-ETEK) for the electrodes, the power density achieved is 1.4 times higher for the Nafion117 MEAs than SPEEK nano-composites. The differences observed in performance is attributed to the large polarization losses found in the composite membranes because of the interfacial phenomena associated with the use of commercial Nafion-based electrodes., This research is in the frame of Support Programme for Research and Development of the Polytechnic University of Valencia, and the Ministry of Science and for funding provided through the projects: ENE2015-69203-R. OSF thanks to CONACYT-Mexico for supporting this research with the grant 475920.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Are the Accompanying Cations of Doping Anions Influential in Conducting Organic Polymers? The Case of the Popular PEDOT

  • Fuentes, I.
  • Mostazo-Lopez, Maria Jose
  • Kelemen, Zsolt
  • Andrio, Andreu
  • Morallon, Emilia
  • Cazorla-Amoros, Diego
  • Viñas, Clara
  • Teixidor, Françesc
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] Conducting organic polymers (COPs) are made of a conjugated polymer backbone supporting a certain degree of oxidation. These positive charges are compensated by the doping anions that are introduced into the polymer synthesis along with their accompanying cations. In this work, the influence of these cations on the stoichiometry and physicochemical properties of the resulting COPs have been investigated, something that has previously been overlooked, but, as here proven, is highly relevant. As the doping anion, metallacarborane [Co(C2B9H11)(2)](-) was chosen, which acts as a thistle. This anion binds to the accompanying cation with a distinct strength. If the binding strength is weak, the doping anion is more prone to compensate the positive charge of the polymer, and the opposite is also true. Thus, the ability of the doping anion to compensate the positive charges of the polymer can be tuned, and this determines the stoichiometry of the polymer. As the polymer, PEDOT was studied, whereas Cs+, Na+, K+, Li+, and H+ as cations. Notably, with the [Co(C2B9H11)(2)](-) anions, these cations are grouped into two sets, Cs+ and H+ in one and Na+, K+, and Li+ in the second, according to the stoichiometry of the COPs: 2:1 EDOT/[Co(C2B9H11)(2)](-) for Cs+ and H+, and 3:1 EDOT/[Co(C2B9H11)(2)](-) for Na+, K+, and Li+. The distinct stoichiometries are manifested in the physicochemical properties of the COPs, namely in the electrochemical response, electronic conductivity, ionic conductivity, and capacitance., We gratefully acknowledge the Spanish Ministerio de Economa y Competitividad (MINECO; projects ENE/2015-69203-R and CTQ2016-75150-R) and the Generalitat de Catalunya (2014/SGR/149) for financial support. I.F. is enrolled in the Ph.D. program of the UAB. Z.K. is grateful for the general support of the European Union's Horizon 2020 Research and Innovation Program through a Marie Sklodowska-Curie grant (MSCA-IF-2016-751587).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Debye length and anionic transport properties on composite membranes based on supported Ionic Liquid-Like Phases (SILLPS)

  • Hernández, Saúl I.
  • Altava, Belén
  • Portillo-Rodríguez, J. A.
  • Santamaría-Holek, Iván
  • García-Alcántara, C.
  • Luis, Santiago V.
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] An analysis of the ionic transport properties of BMIM [NTf2] in supported ionic-liquid-like phase (SILLP)-based membranes has been carried out based on experimental impedance spectroscopy measurements. The direct current (dc)-conductivity was analyzed to determine the temperature and frequency dependence. The fit of the loss tangent curve data with the Cole-Cole approximation of the electrode polarization model provides the conductivity, diffusivity, and density of charge carriers. Among these quantities, a significant increase in conductivity is observed when an ionic liquid is added to the polymeric matrix containing imidazolium fragments. The use of a recent generalization of Eyring's absolute rate theory allowed the elucidation of how the local entropy restrictions, due to the porosity of the polymeric matrix, control the conductive process. The fit of the conductivity data as a function of temperature manifests the behavior of the excess entropy with respect to the temperature. The activation entropy and enthalpy were also determined. Our results correlate the Debye length (L-D) with the experimental values of conductivity, electrode polarization relaxation time, and sample relaxation time involved. Our work provides novel insights into the description of ionic transport in membranes as the diffusivity, mobility, and free charge density depend on the L-D. Moreover, we discuss the behavior of the polarization relaxation time, the sample relaxation time, and the static permittivity as a function of the temperature., V. Compan is grateful to Ministerio de Economia y Competitividad (MINECO), project reference: ENE/2015-69203-R. ISH acknowledges financial support by UNAM-DGAPA under grant IN117419. SIH and CGA are grateful to projects UNAM-DGAPA-PAPIIT IN114721, LANCAD-UNAM-DGTIC-276 and LANCAD-UNAM-DGTIC-385. ISH and JAPR are grateful to project UNAM-DGAPA-PAPIIT IN117419. BA and SVL are grateful to MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe, grant numbers PDI2021-124695OB-C22 and RTI2018-098233-B-C22; Pla de Promocio de la Investigacio de la Universitat Jaume I, grant number UJI-B2021-31 and Conselleria de Innovacio, Universitat i Ciencia, grant number AICO/2021/139.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bimetallic electrocatalysts (Pt-M) supported on single-wall carbon nanotubes for hydrogen and methanol electrooxidation in fuel cells

  • Maya-Cornejo, J.
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] A series of Pt-Ru and Pt-Mo bimetallic catalysts were prepared via a chemical reduction method by bubbling CO to form carbonyl compounds as metal precursors. In both cases the Pt-Ru and Pt-Mo bimetallic electrocatalysts achieved the maximum activity when the amount of Ru and Mo in the material was 50%wt. The physicochemical characterization of the electrocatalytic materials through X-ray diffraction (XRD) and transmission electron microscopy (TEM) has determined the presence of bimetallic structures. The electrochemical characterization using cyclic voltammetry, electrochemical impedance spectroscopy (EIS) and polarization curves in Proton Exchange Membrane Fuel Cells (PEMFC) and Direct Methanol Fuel Cell (DMFC) allowed to systematically investigate the electrocatalytic activity of the synthesized materials for the electrooxidation of hydrogen and methanol. The Pt-Ru/SWCNT electrocatalysts showed a higher current density at least 7-fold and 3-fold compared with Pt/SWCNT and Pt-Mo/SWCNT electrocatalysts, respectively. Besides, the Pt50%-Ru50%/SWCNT exhibited a shifting to negative values in the onset potential reaction for the electrooxidation of methanol of 200 mV in comparison with Pt100%/SWCNT and Pt50%-Mo50%/SWCNT electrocatalysts. The experimental and simulated polarization curves obtained from DMFC show that Pt-Ru/SWCNT and Pt-Mo/SWCNT electrocatalysts exhibited higher power and current densities values compared with the Pt/SWCNT electrocatalyst. The membrane-electrode assembly (MEA) with Nafion and the Pt-Ru/SWCNT electrocatalysts showed an open-circuit voltage value of 0.730 V, significantly higher than that the values for the MEAs with Pt/SWCNT (0.663 V) and Pt-Mo/ SWCNT (0.633 V), respectively., The authors gratefully acknowledge for the Mexican Council for Science and Technology (CONACYT) for the scholarship to the research stay at Polytechnic University of Valencia (Spain) and the School of Chemistry of National Autonomous University of Mexico (UNAM) for providing the necessary infrastructure for the development of a part of this work. This research has been supported by the ENE/2015-69203-R project, granted by the Ministerio de Economia y Competitividad (MINECO), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural and Electrochemical Analysis of CIGS: Cr Crystalline Nanopowders and Thin Films Deposited onto ITO Substrates

  • Saber, Suzan
  • Andrio, Andreu
  • Escorihuela, Jorge
  • Khattab, Nagwa
  • Eid, Ali
  • El Nahrawy, Amany
  • Abo Ali, Mohamed
  • Marí, B.|||0000-0003-0001-419X
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] A new approach for the synthesis of nanopowders and thin films of CuInGaSe2(CIGS)chalcopyrite material doped with different amounts of Cr is presented. The chalcopyrite mate rial CuInxGa1 ¿ xSe2 was doped using Cr to form a new doped chalcopyrite with the structure CuInxCryGa1 ¿ x ¿ ySe2, where x = 0.4 and y = 0.0, 0.1, 0.2, or 0.3. The electrical properties of CuInxCryGa1 ¿ x ¿ ySe2 are highly dependent on the Cr content and results show these materials as promis ing dopants for the fabrication thin film solar cells. The CIGS nano-precursor powder was initially synthesized via an autoclave method, and then converted into thin films over transparent sub strates. Both crystalline precursor powders and thin films deposited onto ITO substrates following a spin-coating process were subsequently characterized using XRD, SEM, HR-TEM, UV¿visible and electrochemical impedance spectroscopy (EIS). EIS measurement was performed to evaluate the dc-conductivity of these novel materials as conductive films to be applied in solar cells., This research has been supported by the Culture Affairs and Missions Sector, Ministry of Higher Education and Scientific Research (Egypt) and Ministerio de Economia y Competitividad (ENE2016-77798-C4-2-R), (ENE2015-69203-R) and Generalitat Valenciana (Prometeus 2014/044).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced Conductivity of Composite Membranes Based on Sulfonated Poly(Ether Ether Ketone) (SPEEK) with Zeolitic Imidazolate Frameworks (ZIFs)

  • Barjola-Ruiz, Arturo
  • Giménez Torres, Enrique|||0000-0002-6330-0209
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
  • Escorihuela Fuentes, Jorge
  • Andrio Balado, Andreu
[EN] The zeolitic imidazolate frameworks (ZIFs) ZIF-8, ZIF-67, and a Zn/Co bimetallic mixture (ZMix) were synthesized and used as fillers in the preparation of composite sulfonated poly(ether ether ketone) (SPEEK) membranes. The presence of the ZIFs in the polymeric matrix enhanced proton transport relative to that observed for SPEEK or ZIFs alone. The real and imaginary parts of the complex conductivity were obtained by electrochemical impedance spectroscopy (EIS), and the temperature and frequency dependence of the real part of the conductivity were analyzed. The results at different temperatures show that the direct current (dc) conductivity was three orders of magnitude higher for composite membranes than for SPEEK, and that of the SPEEK/ZMix membrane was higher than those for SPEEK/Z8 and SPEEK/Z67, respectively. This behavior turns out to be more evident as the temperature increases: the conductivity of the SPEEK/ZMix was 8.5 x 10(-3) S.cm(-1), while for the SPEEK/Z8 and SPEEK/Z67 membranes, the values were 2.5 x 10(-3) S.cm(-1) and 1.6 x 10(-3) S.cm(-1), respectively, at 120 degrees C. Similarly, the real and imaginary parts of the complex dielectric constant were obtained, and an analysis of tan delta was carried out for all of the membranes under study. Using this value, the diffusion coefficient and the charge carrier density were obtained using the analysis of electrode polarization (EP)., This work was funded by The Spanish Ministerio de Economia y Competitividad (MINECO) under the project ENE/2015-69203-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Memory kernel formalism with fractional exponents and its application to dielectric relaxation

  • Hernández, S. I.
  • del Castillo, L.F.
  • del Castillo, Roxana M.
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] A fractal Fokker-Planck formalism applied to the dielectric relaxation in glass forming liquids is proposed. This formalism is a modality of the generalized equation of Langevin on the use of fractional-time derivatives simultaneously with the memory function to describe the dynamics of the dipolar-moment autocorrelation function. The goal is to get the description of the complex autocorrelation function numerically, and the real and imaginary parts of the second-order memory function, related to the kernel of the integral hierarchy representation of this autocorrelation function. The results exhibit the memory effect associates with alpha-dielectric relaxation mode. From the analysis, it is shown the existence of a maximum and the appropriated frequency limit in the imaginary and real parts, respectively, of the second-order memory function. That is required to describe experimental well the complex shear viscosity of the material.The theoretical model was tested with experimental data from dielectric spec-troscopy of biphenyl-2-yl isobutyrate (OBPI), a glass forming liquid, in measurements in the frequency domain from 10-2 to 106 Hz. This ester has been selected in this study for its predominant alpha-relaxation when compared to the beta relaxation. The real and imaginary parts of the second-order memory function were evaluated by means of the proposed model and the aid of the parameters of the Havriliak-Negami relationship., The authors wish to state, posthumously, the excellent research carried out by Prof. Luis F. Del Castillo in the field of the memory effect associated with polymeric materials. On the other hand, we thank Professor Niels Boye Olsen and Jeppe C. Dyre from Roskilde University (Denmark) for dielectric measurements. AG -B and VC gratefully acknowledge to Ministerio de Economia y Competitividad (MINECO) , Spain for financial support by the ENE/2015-69203-R project. AG -B thanks Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia, Spain for the financing of the Project (PAID -11-21) . SIH is grateful to projects UNAM-DGAPA-PAPIIT IN114721, LANCAD-UNAM-DGTIC-276 and appreciate the technical support of Alejandro de Leon Cuevas, Alejandro Avalos and Luis Alberto Aguilar Bautista from Laboratorio Nacional de Visualizacion Cientifica Avanzada (LAVIS-UNAM) , and Beatriz Marcela Millan Malo from CFATA-UNAM. RMdC is grateful to projects LANCAD-UNAM-DGTIC-385 and UNAM-DGAPA-PAPIIT IN120120. LFdC is grateful to projects UNAM- DGAPA-PAPIIT IG-100618 and IN 114818, and also thanks to Raul Reyes Ortiz and Alberto Lopez Vivas for technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ionic Liquid Composite Polybenzimidazol Membranes for High Temperature PEMFC Applications

  • Escorihuela, Jorge
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Montero Reguera, Álvaro Enrique|||0000-0002-4165-4743
  • Sahuquillo, Oscar|||0000-0001-5360-3743
  • Giménez Torres, Enrique|||0000-0002-6330-0209
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] A series of proton exchange membranes based on polybenzimidazole (PBI) were prepared using the low cost ionic liquids (ILs) derived from 1-butyl-3-methylimidazolium (BMIM) bearing different anions as conductive fillers in the polymeric matrix with the aim of enhancing the proton conductivity of PBI membranes. The composite membranes prepared by casting method (containing 5 wt. % of IL) exhibited good thermal, dimensional, mechanical, and oxidative stability for fuel cell applications. The effects of anion, temperature on the proton conductivity of phosphoric acid-doped membranes were systematically investigated by electrochemical impedance spectroscopy. The PBI composite membranes containing 1-butyl-3-methylimidazolium-derived ionic liquids exhibited high proton conductivity of 0.098 Scm(-1) at 120 degrees C when tetrafluoroborate anion was present in the polymeric matrix. This conductivity enhancement might be attributed to the formed hydrogen-bond networks between the IL molecules and the phosphoric acid molecules distributed along the polymeric matrix., The authors acknowledge the Spanish Ministerio de Economia y Competitividad (MINECO) for the financial support under the project ENE/2015-69203-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Temperature dependence of anomalous protonic and superprotonic transport properties in mixed salts based on CsH2PO4

  • Andrio Balado, Andreu
  • Hernández, S. I.
  • García-Alcantara, C.
  • Del Castillo, L. F.
  • Santamaría-Holek, Ivàn
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] We present an experimental study and a theoretical interpretation of the temperature dependence of the transport properties of doped CsH2PO4 salts in both protonic and superprotonic phases. Cesium phosphate based solid electrolytes are technologically relevant because their operational temperature range is about 100 to 300 degrees C in which a superprotonic transition may manifest depending on its mixed composition. The experimental study was carried out using impedance spectroscopy at the temperature range of 150-230 degrees C, and the protonic and superprotonic transport properties and proton concentrations were calculated and analyzed by using the electrode polarization, and the Debye and Cole-Cole models for the dielectric constant. We have shown that the transport properties predicted by the Cole-Cole model are consistent with the conductivity measurements whereas the Debye model shows some inconsistencies. We attribute this to the fact that the Cole-Cole model incorporates the effects of interactions among charge carriers better than the more commonly used Debye model. In this way, our work shows a more consistent approach to determine the transport properties of solid electrolytes and, therefore, provides a more reliable tool to analyze the transport properties of heterogeneous solid electrolytes that can be used in electrochemical devices, including fuel cells and supercapacitors., This research was supported by Ministerio de Economia y Competitividad (MINECO) by means of the project reference: ENE/2015-69203-R. ISH, CGA and SIH are grateful to projects UNAM-DGAPA-PAPIIT-IN116617, IN117419 and IA104319. SIH is grateful to project LANCAD-UNAM-DGTIC-276. LFC is grateful to projects DGAPA-PAPIIT IG-100618 and DGAPA-PAPIIT IN114818. We gratefully acknowledge Profs Dr Francesc Teixidor and Dr Clara Vinas for technical assistance in SEM image and EDX analysis and preparation of samples for such studies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Corneal relaxation time estimation as a function of tear oxygen tension in human cornea during contact lens wear

  • Del Castillo, L. F.
  • Ramírez-Calderón, J. G.
  • Del Castillo, R. M.
  • Aguilella-Arzo, M.
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] The purpose is to estimate the oxygen diffusion coefficient and the relaxation time of the cornea with respect to the oxygen tension at the cornea-tears interface. Both findings are discussed. From the experimental data provided by Bonanno et al., the oxygen tension measurements in vivo for human cornea-tears-contact lens (CL), the relaxation time of the cornea, and their oxygen diffusion coefficient were obtained by numerical calculation using the Monod-kinetic model. Our results, considering the relaxation time of the cornea, observe a different behavior. At the time less than 8 s, the oxygen diffusivity process is upper-diffusive, and for the relaxation time greater than 8 s, the oxygen diffusivity process is lower-diffusive. Both cases depend on the partial pressure of oxygen at the entrance of the cornea. The oxygen tension distribution in the cornea-tears interface is separated into two different zones: one for conventional hydrogels, which is located between 6 and 75 mmHg, with a relaxation time included between 8 and 19 s, and the other zone for silicone hydrogel CLs, which is located at high oxygen tension, between 95 and 140 mmHg, with a relaxation time in the interval of 1.5-8 s. It is found that in each zone, the diffusion coefficient varies linearly with the oxygen concentration, presenting a discontinuity in the transition of 8 s. This could be interpreted as an aerobic-to-anaerobic transition. We attribute this behavior to the coupling formalism between oxygen diffusion and biochemical reactions to produce adenosine triphosphate., Contract grant sponsor: Dirección General de Asuntos del Personal Académico, Universidad Nacional Autónoma de México; contract grant number: UNAM-DGAPA-PAPIIT projects IG 100618 and IN-114818 Contract grant sponsor: Secretaría de Estado de Investigación, Desarrollo e Innovación; contract grant number: ENE/2015-69203-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Phosphoric Acid Doped Polybenzimidazole (PBI)/Zeolitic Imidazolate Framework Composite Membranes with Signioficantly Enhanced Proton Conductivity under Low Humidity Conditions

  • Escorihuela Fuentes, Jorge
  • Sahuquillo, Oscar|||0000-0001-5360-3743
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Giménez Torres, Enrique|||0000-0002-6330-0209
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] The preparation and characterization of composite polybenzimidazole (PBI) membranes containing zeolitic imidazolate framework 8 (ZIF-8) and zeolitic imidazolate framework 67 (ZIF-67) is reported. The phosphoric acid doped composite membranes display proton conductivity values that increase with increasing temperatures, maintaining their conductivity under anhydrous conditions. The addition of ZIF to the polymeric matrix enhances proton transport relative to the values observed for PBI and ZIFs alone. For example, the proton conductivity of PBI@ZIF-8 reaches 3.1 x 10(-3) S.cm(-1) at 200 degrees C and higher values were obtained for PBI@ZIF-67 membranes, with proton conductivities up to 4.1 x 10(-2) S.cm(-1). Interestingly, a composite membrane containing a 5 wt.% binary mixture of ZIF-8 and ZIF-67 yielded a proton conductivity of 9.2 x 10(-2) S.cm(-1), showing a synergistic effect on the proton conductivity., This research was funded by the Spanish Ministerio de Economia y Competitividad (MINECO) under the project ENE/2015-69203-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of Pectin as a green polymer electrolyte on the transport properties of Chitosan-Pectin membranes

  • Pasini Cabello. S.D.
  • Ochoa, N.A.
  • Takara, E.A.
  • Mollá, S.
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] Novel blend membranes have been prepared from Chitosan (CH), Pectin (PEC) and their mixtures. The obtained samples were cross-linked and sulfonated before characterization. The results show that CH/PEC membranes display structural changes on the chemical and physical properties as a function of composition. DSC analysis reveals an endothermic peak due to the scission of the ionic pairs between carboxylic groups and ammonium groups, which produces a strong change on physical properties such as methanol permeability and proton conductivity. The methanol permeability decreases with the amount of Pectin from (4.24 +/- 0.04) x 10(-6) cm(2)/s for pure Chitosan membrane to (1.51 +/- 0.03) x 10(-6) cm(2)/s for blend CH/PEC membranes when the amount of Pectin is 50% (v/v). The proton conductivities of the blend membranes follow a similar behavior. For a pure CH membrane the conductivity is 2.44 x 10(-3) S/cm, decreasing with pectin content until the composition 50/50 (v/v), in which the conductivity drops almost one order of magnitude. (C) 2016 Elsevier Ltd. All rights reserved., This research has been supported by the ENE/2015-69203-R project, granted by the Ministerio de Economia y Competitividad, Spain, and grants from ANPCyT, Universidad Nacional de San Luis, CONICET, Argentina. Sergio David Pasini Cabello thanks Erasmus Mundus Program for a EUROTANGO 2 fellowship at the Universidad Politecnica de Valencia (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Entropic restrictions control the electric conductance of superprotonic ionic solids

  • Santamaría-Holek, Iván
  • Ledesma-Duran, Aldo
  • Hernández, S. I.
  • García-Alcántara, C.
  • Andrio, Andreu
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] The crystallographic structure of solid electrolytes and other materials determines the protonic conductivity in devices such as fuel cells, ionic-conductors, and supercapacitors. Experiments show that a rise of the temperature in a narrow interval may lead to a sudden increase of several orders of magnitude of the conductivity of some materials, a process called a superprotonic transition. Here, we use a novel macro-transport theory for irregular domains to show that the change of entropic restrictions associated with solid-solid phase or structural transitions controls the sudden change of the ionic conductivity when the superprotonic transition takes place. Specifically, we deduce a general formula for the temperature dependence on the ionic conductivity that fits remarkably well experimental data of superprotonic transitions in doped cesium phosphates and other materials reported in the literature., ISH, SIH, CGA and ALD acknowledge financial support from UNAM-DGAPA under grants IN116617, IN117419 and IA104319. V. Compan is grateful to the Ministerio de Economia y Competitividad (MINECO), project reference: ENE/2015-69203-R. SIH is grateful to project LANCAD-UNAM-DGTIC-276. ALD acknowledges DGAPA-UNAM CJIC/CTIC/4692/2019. ISH acknowledges Prof. Vi ' ctor Castano for his hospitality during sabbatical leave in which this work was finished.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Proton Conducting Electrospun Sulfonated Polyether Ether Ketone-Graphene Oxide Composite Membranes

  • Reyes-Rodriguez, Jose Luis
  • Escorihuela Fuentes, Jorge
  • Solorza-Feria, Omar
  • Garcia-Bernabe, Abel|||0000-0002-9740-0830
  • Giménez Torres, Enrique|||0000-0002-6330-0209
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] A series of novel composite membranes, based on sulfonated poly(ether ketone) (SPEEK) with a graphene oxide (GO) layer, were prepared. One contained a GO layer sandwiched between the SPEEK-polyvinyl alcohol (PVA) matrix (SPEEK/PVA@GO), and another deposited thin layers of GO on the nanofibers of SPEEK-polyvinyl butyral (PVB), with both sandwiched in the phase matrix of SPEEK-PVA (SPEEK/PVA@GO-NF). Various nanofiber thicknesses were studied by varying the electrospinning time. The prepared composite membranes with different nanofiber thicknesses were characterized by scanning electron microscopy, water uptake, ionic exchange capacity, thermogravimetric analysis, mechanical properties and proton conductivity. Our results showed that the proton conductivity of SPEEK/PVA@GO membranes increased with temperature, from 1 x 10(-3) S cm(-1) at 30 degrees C to 8.3 x 10(-3) S cm(-1) at 130 degrees C. These conductivity values are higher than those observed for the membrane with SPEEK/PVA@GO-NF nanofibers. However, a conductivity comparison of the different thicknesses of SPEEK/PVA@GO-NF nanofibers allowed us to conclude that conductivities increase with nanofiber thickness at all temperatures. Finally, the calculated activation energy of the SPEEK/PVA@GO membrane (1.4 kJ mol(-1)) was found to be one order of magnitude lower than that for pure SPEEK/PVA (17.3 kJ mol(-1)). This reduction indicated that the influence of temperature on the conductivity decreases when GO is inserted into SPEEK/PVA membranes. In the case of the SPEEK/PVA@GO-NF membrane, the activation energy decreased as a function of the nanofiber network's thickness., We gratefully acknowledge Ministerio de Economia y Competitividad (MINECO), Spain for financial support via the ENE/2015-69203-R project.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Are the Accompanying Cations of Doping Anions Influential in Conducting Organic Polymers? The Case of the Popular PEDOT

  • Fuentes, Isabel
  • Mostazo-López, María José
  • Kelemen, Zsolt
  • Compañ, Vicente
  • Andrio, Andreu
  • Morallon, Emilia
  • Cazorla-Amorós, Diego
  • Viñas, Clara
  • Teixidor, Francesc
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
Conducting organic polymers (COPs) are made of a conjugated polymer backbone supporting a certain degree of oxidation. These positive charges are compensated by the doping anions that are introduced into the polymer synthesis along with their accompanying cations. In this work, the influence of these cations on the stoichiometry and physicochemical properties of the resulting COPs have been investigated, something that has previously been overlooked, but, as here proven, is highly relevant. As the doping anion, metallacarborane [Co(C2B9H11)2]− was chosen, which acts as a thistle. This anion binds to the accompanying cation with a distinct strength. If the binding strength is weak, the doping anion is more prone to compensate the positive charge of the polymer, and the opposite is also true. Thus, the ability of the doping anion to compensate the positive charges of the polymer can be tuned, and this determines the stoichiometry of the polymer. As the polymer, PEDOT was studied, whereas Cs+, Na+, K+, Li+, and H+ as cations. Notably, with the [Co(C2B9H11)2]− anions, these cations are grouped into two sets, Cs+ and H+ in one and Na+, K+, and Li+ in the second, according to the stoichiometry of the COPs: 2:1 EDOT/[Co(C2B9H11)2]− for Cs+ and H+, and 3:1 EDOT/[Co(C2B9H11)2]− for Na+, K+, and Li+. The distinct stoichiometries are manifested in the physicochemical properties of the COPs, namely in the electrochemical response, electronic conductivity, ionic conductivity, and capacitance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Are the Accompanying Cations of Doping Anions Influential in Conducting Organic Polymers? The Case of the Popular PEDOT

  • Fuentes Sempere, Isabel
  • Mostazo-López, María José
  • Kelemen, Zsolt
  • Compañ, Vicente
  • Andrio, Andreu
  • Morallón, Emilia
  • Cazorla Amorós, Diego
  • Viñas, Clara
  • Teixidor, Francesc
Conducting organic polymers (COPs) are made of a conjugated polymer backbone supporting a certain degree of oxidation. These positive charges are compensated by the doping anions that are introduced into the polymer synthesis along with their accompanying cations. In this work, the influence of these cations on the stoichiometry and physicochemical properties of the resulting COPs have been investigated, something that has previously been overlooked, but, as here proven, is highly relevant. As the doping anion, metallacarborane [Co(C2B9H11)2]− was chosen, which acts as a thistle. This anion binds to the accompanying cation with a distinct strength. If the binding strength is weak, the doping anion is more prone to compensate the positive charge of the polymer, and the opposite is also true. Thus, the ability of the doping anion to compensate the positive charges of the polymer can be tuned, and this determines the stoichiometry of the polymer. As the polymer, PEDOT was studied, whereas Cs+, Na+, K+, Li+, and H+ as cations. Notably, with the [Co(C2B9H11)2]− anions, these cations are grouped into two sets, Cs+ and H+ in one and Na+, K+, and Li+ in the second, according to the stoichiometry of the COPs: 2:1 EDOT/[Co(C2B9H11)2]− for Cs+ and H+, and 3:1 EDOT/[Co(C2B9H11)2]− for Na+, K+, and Li+. The distinct stoichiometries are manifested in the physicochemical properties of the COPs, namely in the electrochemical response, electronic conductivity, ionic conductivity, and capacitance., We gratefully acknowledge the Spanish Ministerio de Economía y Competitividad (MINECO; projects ENE/2015‐69203‐R and CTQ2016‐75150‐R) and the Generalitat de Catalunya (2014/SGR/149) for financial support. I.F. is enrolled in the Ph.D. program of the UAB. Z.K. is grateful for the general support of the European Union's Horizon 2020 Research and Innovation Program through a Marie Skłodowska‐Curie grant (MSCA‐IF‐2016–751587)., Peer reviewed