Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Vapor-Phase Photocatalytic Overall Water Splitting Using Hybrid Methylammonium Copper and Lead Perovskites

  • García, Teresa
  • García-Aboal, Rocío
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Films or powders of hybrid methylammonium copper halide perovskite exhibit photocatalytic activity for overall water splitting in the vapor phase in the absence of any sacrificial agent, resulting in the generation of H-2 and O-2, reaching a maximum production rate of 6 mu mol H-2 x g cat(-1)h(-1) efficiency. The photocatalytic activity depends on the composition, degreasing all inorganic Cs2CuCl2Br2 perovskite and other Cl/Br proportions in the methylammonium hybrids. XRD indicates that MA(2)CuCl(2)Br(2) is stable under irradiation conditions in agreement with the linear H-2 production with the irradiation time. Similar to copper analogue, hybrid methylammonium lead halide perovskites also promote the overall photocatalytic water splitting, but with four times less efficiency than the Cu analogues. The present results show that, although moisture is strongly detrimental to the photovoltaic applications of hybrid perovskites, it is still possible to use these materials as photocatalysts for processes requiring moisture due to the lack of relevance in the photocatalytic processes of interparticle charge migration., This research was funded by the Fundacion Ramon Areces (XVII Concurso Nacional para la adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia), Intramural CSIC project 201680I006, and the Spanish Ministry of Spain Severo Ochoa Program, grant number SEV-2016-0683, grant number MAT2015-69669-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Unusually Low Heat of Adsorption of CO2 on AlPO and SAPO Molecular Sieves

  • Pérez-Botella, Eduardo
  • Martínez-Franco, Raquel
  • Gonzalez-Camuñas, Nuria
  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The capture of CO2 from post-combustion streams or from other mixtures, such as natural gas, is an effective way of reducing CO2 emissions, which contribute to the greenhouse effect in the atmosphere. One of the developing technologies for this purpose is physisorption on selective solid adsorbents. The ideal adsorbents are selective toward CO2, have a large adsorption capacity at atmospheric pressure and are easily regenerated, resulting in high working capacity. Therefore, adsorbents combining molecular sieving properties and low heats of adsorption of CO2 are of clear interest as they will provide high selectivities and regenerabilities in CO2 separation process. Here we report that some aluminophosphate (AlPO) and silicoaluminophosphate (SAPO) materials with LTA, CHA and AFI structures present lower heats of adsorption of CO2 (13¿25 kJ/mol) than their structurally analogous zeolites at comparable framework charges. In some cases, their heats of adsorption are even lower than those of pure silica composition (20¿25 kJ/mol). This could mean a great improvement in the regeneration process compared to the most frequently used zeolitic adsorbents for this application while maintaining most of their adsorption capacity, if materials with the right stability and pore size and topology are found., We acknowledge the Spanish Ministry of Sciences, Innovation and Universities (MCIU), State Research Agency (AEI), and the European Fund for Regional Development (FEDER) for their funding via projects Multi2HYcat (EU-Horizon 2020 funded project under grant agreement no. 720783), Program Severo Ochoa SEV-2016-0683 and RTI2018-101033-B-I00 and also Fundacion Ramon Areces for funding through a research contract (CIVP18A3908). EP-B thanks the MCIU for his grant (FPU15/01602). NG-C thanks MCIU for her grant (BES-2016-078178).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

CO(2)hydrogenation using bifunctional catalysts based on K-promoted iron oxide and zeolite: influence of the zeolite structure and crystal size

  • García-Hurtado, Elisa
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Martínez, Cristina|||0000-0002-4415-084X
  • Rodríguez-Fernández, Aida
[EN] In the present manuscript, the influence of the zeolite structure and crystal size on bifunctional tandem catalysts combining K-promoted iron oxide (K/Fe3O4) with different zeolites has been studied for the CO(2)hydrogenation reaction at 320 degrees C and 25 bar. First, to evaluate the influence of the zeolite structure on CO(2)conversion, three different zeolite topologies have been evaluated (BEA, MFI and CHA) with similar Si/Al molar ratios. The combination of K/Fe(3)O(4)with MFI maximizes the formation of aromatic products, while its combination with CHA and BEA increases the C-1-C(4)gas fractions, with a high olefin selectivity. In addition, aromatics and aliphatic hydrocarbons are present in the condensed liquids of the tandem catalysts containing BEA, while no aromatics are observed for those with CHA. These different product selectivities can be ascribed to the different consecutive reactions within the three zeolites, where MFI favors the aromatization of alkenes, and BEA and CHA favor oligomerization/cracking reactions leading to an increase of light olefin yield. Second, the evaluation of the nanosized form of the three proposed zeolite frameworks has also been carried out. The reduction of the particle size allows for increasing light olefin selectivity in all cases as compared to zeolites with larger crystals. Shorter intracrystalline diffusion paths facilitate the egression of light olefins before being involved in consecutive oligomerization reactions. In the particular case of the tandem catalysts with nanosized MFI zeolites, the C-2-C(4)fraction and its olefinicity are increased while maintaining the overall aromatic selectivity comparable to that obtained with micron-sized MFI zeolites., This work was supported by the Spanish Government through "Severo Ochoa" (SEV-2016-0683, MINECO) and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE), by the Fundacion Ramon Areces through a research contract (CIVP18A3908) and by Generalitat Valenciana (AICO/2019/060). A. R. F. acknowledges the Spanish Government-MINECO for a FPU scholarship (FPU2017/01521). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chemical and Structural Parameter Connecting Cavity Architecture, Confined Hydrocarbon Pool Species, and MTO Product Selectivity in Small-Pore Cage-Based Zeolites

  • Ferri-Vicedo, Pau
  • Li, Chengeng
  • Paris, Cecilia|||0000-0002-5673-8114
  • Vidal Moya, José Alejandro
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The catalysts used in the methanol-to-olefins (MTO) reaction are considered dual systems comprising an inorganic zeolite framework and organic compounds hosted inside that act as cocatalysts. The influence of zeolite cavity architecture on the preferential stabilization of cationic intermediates involved in the paring and side-chain routes of the hydrocarbon pool mechanism is analyzed by means of density functional theory (DFT) calculations, catalyst testing, and C-13 NMR spectroscopy for some small-pore cage-based zeolites. A correlation between the degree of methylation of the entrapped methylbenzenium (MB+) cations and the selectivity to ethene and propene is found experimentally and explained in terms of the electronic distribution of the first intermediate of the paring route. A deep understanding of the reaction mechanism and of the specific host guest interactions taking place inside zeolite catalysts allows establishing a quantitative parameter that is indicative for the contribution of the paring route and therefore the C-3(=)/C-2(=) ratio in the MTO reaction., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), Spanish Government through "Severo Ochoa" (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE), and RTI2018-101033-B-100 (MCIU/AEI/FEDER, UE), and by the Fundacion Ramon Areces through a research contract (CIVP18A3908). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Espanola de Supercomputacion (RES) and Servei d'Informatica de la Universitat de Valencia are acknowledged for computational resources and technical support. C.L. acknowledges the China Scholarship Council (CSC) for a Ph.D. fellowship. P.F. thanks ITQ for acontract. The authors thank Prof. Fernando Rey and Dr. Joaquin Martinez for helpful discussions.