Skip to main content

AJUSTE DE LAS PROPIEDADES OPTOELECTRONICAS DE NANOESTRUCTURAS: SU (TRANS)FORMACION Y ESTUDIOS AVANVAZADOS SOBRE SU CONFIGURACION ATOMICA Y ESTUCTURAL

MAT2016-79776-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 118
Encontrada(s) 2 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Determination of the Evolution of Heterogeneous Single Metal Atoms and Nanoclusters under Reaction Conditions: Which Are the Working Catalytic Sites?

  • Liu, Lichen
  • MEIRA, DEBORA M.
  • Arenal, Raul
  • Puga, Alberto V.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Identification of active sites in heterogeneous metal catalysts is critical for understanding the reaction mechanism at the molecular level and for designing more efficient catalysts. Because of their structural flexibility, subnanometric metal catalysts, including single atoms and clusters with a few atoms, can exhibit dynamic structural evolution when interacting with substrate molecules, making it difficult to determine the catalytically active sites. In this work, Pt catalysts containing selected types of Pt entities (from single atoms to clusters and nanoparticles) have been prepared, and their evolution has been followed, while they were reacting in a variety of heterogeneous catalytic reactions, including selective hydrogenation reactions, CO oxidation, dehydrogenation of propane, and photocatalytic H-2 evolution reaction. By in situ X-ray absorption spectroscopy, in situ IR spectroscopy, and high-resolution electron microscopy techniques, we will show that some characterization techniques carried out in an inadequate way can introduce confusion on the interpretation of coordination environment of highly dispersed Pt species. Finally, the combination of catalytic reactivity and in situ characterization techniques shows that, depending on the catalyst-reactant interaction and metal-support interaction, singly dispersed metal atoms can rapidly evolve into metal clusters or nanoparticles, being the working active sites for those abovementioned heterogeneous reactions., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683). L.L. thanks ITQ for providing a contract. The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, and was supported by the U.S. DOE under contract no. DE-AC02-06CH11357 and the Canadian Light Source and its funding partners. The HR STEM and STEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R.A. acknowledges support from Spanish MINECO grant MAT2016-79776-P (AEI/FEDER, UE), from the Government of Aragon and the European Social Fund (grant number E13_17R, FEDER, UE), and from the European Union H2020 program "ESTEEM3" (grant number 823717). A.V.P. thanks the Spanish Government (Agencia Estatal de Investigacion) and the European Union (European Regional Development Fund) for a grant for young researchers (CTQ2015-74138-JIN, AEI/FEDER/UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Generation of gold nanoclusters encapsulated in an MCM-22 zeolite for the aerobic oxidation of cyclohexane

  • Liu, Lichen
  • Arenal, Raul
  • Meira, Debora M.
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] In this work, we will report the generation of Au clusters in a purely siliceous MCM-22 zeolite. The catalytic properties of these Au clusters have been tested for the selective oxidation of cyclohexane to cyclohexanol and cyclohexanone (KA-oil). The Au clusters encapsulated in the MCM-22 zeolite are highly active and selective for the oxidation of cyclohexane to KA-oil, which is superior to Au nanoparticles on the same support. These results suggest that Au clusters are highly active for the activation of oxygen to produce radical species., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683). The authors also thank the Microscopy Service of UPV for kind help with TEM and STEM measurements. Mr J. A. Gaona is greatly acknowledged for his very helpful assistance on the catalytic studies. The XAS data were acquired at European Synchrotron Radiation Facility. The HAADF-HRSTEM studies were conducted in the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA)-Universidad de Zaragoza (Spain), Spanish ICTS National facility. R. A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Low-Temperature Catalytic NO Reduction with CO by Subnanometric Pt Clusters

  • Fernández-Villanueva, Estefanía
  • Liu, Lichen
  • Arenal, Raul
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The catalytic subnanometric metal clusters with a few atoms can be regarded as an intermediate state between single atoms and metal nanoparticles (>1 nm). Their molecule-like electronic structures and flexible geometric structures bring rich chemistry and also a different catalytic behavior, in comparison with the single-atom or nanoparticulate counterparts. In this work, by combination of operando IR spectroscopy techniques and electronic structure calculations, we will show a comparative study on Pt catalysts for CO + NO reaction at a very low temperature range (140-200 K). It has been found that single Pt atoms immobilized on MCM-22 zeolite are not stable under reaction conditions and agglomerate into Pt nanoclusters and particles, which are the working active sites for CO + NO reaction. In the case of the catalyst containing Pt nanoparticles (similar to 2 nm), the oxidation of CO to CO2 occurs in a much lower extension, and Pt nanoparticles become poisoned under reaction conditions because of a strong interaction with CO and NO. Therefore, only subnanometric Pt clusters allow NO dissociation at a low temperature and CO oxidation to occur well on the surface, while CO interaction is weak enough to avoid catalyst poisoning, resulting in a good balance to achieve enhanced catalytic performance., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014671093, SynCatMatch) and the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683) and MAT2017-82288-C2-1-P projects. L.L. thanks ITQ for providing a contract. E.F. thanks MINECO for her fellowship SVP-2013-068146. The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. The HRSTEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. RA. acknowledges support from Spanish MINECO grant MAT2016-79776-P (AEI/FEDER, UE), from the Government of Aragon and the European Social Fund (grant number E13_17R, FEDER, UE), and from the European Union H2020 program "ESTEEM3" (grant number 823717). Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are acknowledged for computational resources and technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

One Pot Cooperation of Single Atom Rh and Ru Solid Catalysts for a Selective Tandem Olefin Isomerization - Hydrosilylation Process

  • Sarma, Bidyut B.
  • Kim, Jonglack
  • Amsler, Jonas
  • Agostini, Giovanni
  • Weidenthaler, Claudia
  • Pfaender, Norbert
  • Arenal, Raul
  • Plessow, Philipp
  • Studt, Felix
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Realizing the full potential of oxide-supported single-atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one-pot combination of Ru-1/CeO2 and Rh-1/CeO2 SACs enables a highly selective olefin isomerization-hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double-bond migration and anti-Markovnikov alpha-olefin hydrosilylation, respectively. First-principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single-pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio-selectivity (>95 %) even from industrially-relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide-supported single-atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes., X-ray absorption experiments were performed at the ALBA Synchrotron Light Source (Spain), experiments 2018082961 and 2019023278. L. Simonelli and C. Marini (CLAESSALBA beamline) are thanked for beamline setup. E. Andres, M. E. Martinez, M. Garcia, and I. Lopez (ITQ), are acknowledged for their assistance with XAS experiments. J. Buscher, J. Ternedien, B. Spliethoff, and C. Wirtz (MPI-KOFO) are acknowledged for the performance of XPS, XRD, BF-TEM and 2H NMR experiments, respectively. I. C. de Freitas (MPIKOFO) is thanked for assistance with Raman spectroscopy. J. M. Salas (ITQ) is gratefully acknowledged for his contribution to CO-FTIR experiments. J. J. Barnes and Shell (Amsterdam) are acknowledged for kindly providing an industrial olefin mixture as feed. Authors are thankful to F. Schuth for the provision of lab space and continued support. Part of the HRSTEM and EDX-STEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) and from the European Union H2020 programs "ESTEEM3" (823717). The authors acknowledge support by the state of Baden-Wurttemberg through bwHPC (bwUnicluster and JUSTUS, RV bw17D01), by the GRK 2450 and by the Helmholtz Association. This research received funding from the Max Planck Society, and the Fonds der Chemische Industrie of Germany. Funding from the Spanish Ministry of Science, Innovation and Universities (Severo Ochoa program SEV-2016-0683 and grant RTI2018096399-A-I00) is also acknowledged. B.B.S. acknowledges the Alexander von Humboldt Foundation for a postdoctoral scholarship. Open Access funding is provided by the Max Planck Society.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene oxide-carbon nanotube hybrid assemblies: Cooperatively strengthened OH···O=C hydrogen bonds and removal of chemisorbed water

  • Núñez, Jesús David
  • Benito, Ana M.
  • Rouzière, Stéphan
  • Launois, Pascale
  • Arenal, Raúl
  • Ajayan, Pulickel M.
  • Maser, Wolfgang K.
6 Figuras, Owing to their great interest for energy storage and sensing applications, multi-layer papers consisting of graphene oxide – carbon nanotube (GO-CNT) hybrid sheets were prepared by in-situ exfoliation of graphite oxide in the presence of oxidized CNTs (oCNTs). For the first time we elucidate the influence of oCNTs on chemisorbed water (CW), i.e. water molecules inherently bound to oxygen functional groups (OFGs) of graphene oxide (GO) and responsible for irreversible structural damage upon thermal reduction processes. We show that oCNTs self-assemble onto GO sheets during the liquid phase processing steps by forming cooperatively strengthened OH···O=C hydrogen bonds between the carboxylic groups of oCNTs and OFGs of GO. At oCNT contents of about 10 to 15 wt. % this leads to the displacement of considerable amounts of CW without altering the original chemical composition of GO. Thermally reduced GO-CNT (rGO-CNT) papers reveal improved sp2 character and an enhancement of the specific capacitance by 75% with respect to thermally reduced GO (rGO), largely due to the effective removal of CW by oxidized CNTs. These findings disclose the relevance of cooperative hydrogen bonding phenomena in graphene oxide paper/film electrodes for the development of improved electrochemical energy storage and sensing devices., JDN is thankful for his CSIC PhD grant JAEPre09-01155 covering also his research stay at Rice University. WKM and AMB acknowledge financial support from Spanish MINECO and the European Regional Development Fund through project grants ENE2013-48816-C5-5-R, ENE2016-79282-C5-1-R and the Government of Aragon and the European Social Fund under project DGA-FSE-T66 CNN. RA gratefully acknowledges the support from MINECO through project grants FIS2013-46159- C3-3-P and MAT2016-79776-P. Some of the research has received funding from the European Union FP7 program under Grant Agreement 312483 ESTEEM2 (Integrated Infrastructure Initiative – I3) and from the European Union H2020 program under the grant 696656 Graphene Flagship, and H2020 Marie Skłodowska-Curie grant 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interfacing transition metal dichalcogenides with carbon nanodots for managing photoinduced energy and chargetransfer processes

  • Vallan, Lorenzo
  • Canton-Vitoria, Rubén
  • Gobeze, Habtom B.
  • Jang, Youngwoo
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Souza, Francis d'
  • Tagmatarchis, Nikos
Exfoliated semiconducting MoS2 and WS2 were covalently functionalized with 1,2-dithiolane-modified carbon nanodots (CNDs). The newly synthesized CND-MoS2 and CND-WS2 hybrids were characterized by spectroscopic, thermal and electron microscopy imaging methods. Based on electronic absorption and fluorescence emission spectroscopy, modulation of the optoelectronic properties of TMDs by interfacing with CNDs was accomplished. Electrochemical studies revealed facile oxidation of MoS2 over WS2 in the examined hybrids, suggesting it to be better electron donor. Excited state events, investigated by femtosecond transient absorption spectroscopic studies, revealed ultrafast energy transfer from photoexcited CNDs to both MoS2 and WS2. Interestingly, upon MoS2 photoexcitation charge transfer from an exciton dissociation path of MoS2 to CNDs, within CNDMoS2, was observed. However, such process in CND-WS2 was found to be absent due to energetic reasons. The present study highlights the importance of TMD-derived donor-acceptor hybrids in light energy harvesting and optoelectronic applications. Furthermore, the fundamental information obtained from the current results will benefit design strategies and impact the development of additional TMD-based hybrid materials to efficiently manage and perform in electron-transfer processes., This project has received funding from the European Union‘s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, funded by the Operational Programme "Competitiveness, Entrepreneurship and Innovation" co-financed by Greece (Ministry of Economy and Development, NSRF 2014-2020) and EU (European Regional Development Fund) to N. T. and the US-NSF (grant 1401188 to F. D.) is acknowledged. The HR-STEM and STEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R. A. acknowledges support from Spanish MINECO grant MAT2016- 79776-P (AEI/FEDER, UE) and from EU H2020 “Graphene Flagship” grant agreement 785219. W. K. M. and A. M. B. acknowledge Spanish MINECO grant ENE2016-79282-C5-1-R (AEI/FEDER, EU) and the Covernment of Aragon through project DGA-T03_17R (FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

MoS2-carbon nanotube hybrid material growth and gas sensing

  • Deokar, Geetanjali
  • Vancsó, Péter
  • Arenal, Raúl
  • Ravaux, Florent
  • Casanova-Cháfer, Juan
  • Llobet, Eduard
  • Makarova, Anna A.
  • Vyalikh, Denis V.
  • Struzzi, Clauida
  • Lambin, Philippe
  • Jouiad, Mustapha
  • Colomer, Jean-François
Hexagonal‐shaped nanoplates (HNPs) of MoS2 on vertically aligned carbon nanotubes (CNTs) over a patterned area (a circular area of 1 cm2 diameter) are produced by chemical vapor deposition technique. With an optimized initial Mo film thickness, a uniform coverage of MoS2 HNPs with a thickness around 20 nm is achieved. The results confirm that the CNT template plays an important role in the MoS2 HNPs growth. Each MoS2 HNP consists of abundant exposed edges, interesting for sensing and catalysis applications. High crystallinity and quality of the as‐produced material are revealed by X‐ray photoelectron and Raman spectroscopies. Furthermore, NO2 gas‐sensing studies show better sensitivity and recovery for MoS2/CNT samples as compared to pristine CNTs. The detection of NO2 gas in a few tens of parts per million to a few hundreds of parts per billion range, at room temperature, is achieved. Density‐functional theory calculation indicates that the exposed edges of MoS2 play a significant role in the NO2 sensing as compared to horizontally aligned MoS2 layers. The present report can promote the research toward the fabrication of efficient and reliable MoS2‐based hybrid materials for toxic gas‐sensing applications for air quality monitoring in various environments., This research leading to these results received funding in part from European Union Seventh Framework H2020 Program under Grant Agreement No. 696656 Graphene Flagship. J.-F.C. is Senior Research Associate of FRS-FNRS. R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (Grant No. E/26), and from the European Union H2020 program ETN project “Enabling Excellence” Grant Agreement No. 642742. E.L. was supported by the Catalan Institution for Research and Advanced Studies via the ICREA Academia Award and MINECO-FEDER (grant no. TEC2015-71663-R) and J.C.-C. was supported by Universitat Rovira i Virgili via a Martí i Franquès predoctoral fellowship. This work was supported by the Helmholtz-Zentrum Berlin für Materialien und Energie within a bilateral Russian–German Laboratory program. A.A.M. acknowledges support from DFG, Grant No. LA655/13-2. D.V.V. acknowledges Saint Petersburg State University (SPbU) for research Grant No. 15.61.202.2015., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanotubes from the misfit compound alloy LaS-NbxTa(1–x)S2

  • Stolovas, Dalit
  • Serra, Marco
  • Popovitz-Biro, Ronit
  • Pinkas, Iddo
  • Houben, Lothar
  • Calvino, José J.
  • Joselevich, Ernesto
  • Tenne, Reshef
  • Arenal, Raúl
  • Lajaunie, Luc
Misfit layered compounds (MLC) with the composition (LaS)1.15TaS2 (for simplicity denoted as LaS-TaS2) and LaS-NbS2 were prepared and studied in the past. Nanotubes of LaS-TaS2 could be easily synthesized, while tubular structure of the LaS-NbS2 were found to be rather rare in the product. To understand this riddle, quaternary alloys of LaS-NbxTa(1–x)S2 with ascending Nb concentration were prepared herein in the form of nanotubes (and platelets). Not surprisingly, the concentration of these quaternary nanotubes shrank (and the relative density of platelets increased) with increasing Nb content in the precursor. The structure and chemical composition of such nanotubes was elucidated by electron microscopy. Conceivably, the TaS2 in the MLC compounds LnS-TaS2 (Ln = lanthanide atom) crystallizes in the 2H polytype. High resolution transmission electron microscopy showed however that, invariably, MLC nanotubes prepared from 80 at% Nb content in the precursor belonged to the 1T polytype. Raman spectroscopy of individual tubes revealed that up to 60 at% Nb, they obey the standard model of MLC, while higher Nb lead to large deviations, which are discussed in brief. The analysis indicated also that such nanotubes do not exhibit the pattern assigned to charge density wave transition so typical for binary 1T-TaS2. The prospect for revealing interesting quasi-1D behavior of such quaternary nanotubes is also briefly discussed., R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project Grant No. MAT2016-79776-P (AEI/FEDER, UE). We acknowledge the support of the Irving and Cherna Moskowitz Center for Nano and Bio-Nano Imaging; the Perlman Family Foundation; the Kimmel Center for Nanoscale Science Grant No. 43535000350000; and the Irving and Azelle Waltcher Foundations in honor of Prof. M. Levy Grant No. 720821. Funding from the MINECO/FEDER (Project Refs: MAT2017-87579-R and MAT2016-81118-P) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Shape selection through epitaxy of supported platinum nanocrystals

  • Peres, Laurent
  • Yi, Deliang
  • Bustos-Rodriguez, Susana
  • Marcelot, Cécile
  • Pierrot, Alexandre
  • Fazzini, Pier-Francesco
  • Florea, Ileana
  • Arenal, Raúl
  • Macroix, Lise-Marie
  • Warot-Fonrose, Bénédicte
  • Blon, Thomas
  • Soulantica, Katerina
Supported nanocrystals of original shapes are highly desirable for the development of optimized catalysts; however, conventional methods for the preparation of supported catalysts do not allow shape control. In this work, we have synthesized concave platinum nanocubes exposing {110} crystallographic facets at 20 °C. In the presence of a crystallographically oriented Pt(111) support in the reaction medium, the concave nanocubes grow epitaxially on the support, producing macroscopic nanostructured surfaces. Higher reaction temperature produces a mixture of different nanostructures in solution; however, only the nanostructures growing along the 111 direction are obtained on the Pt(111) support. Therefore, the oriented surface acts as a template for a selective immobilization of specific nanostructures out of a mixture, which can be regarded as an "epitaxial resolution" of an inhomogeneous mixture of nanocrystals. Thus, a judicious choice of the support crystallographic orientation may allow the isolation of original nanostructures that cannot be obtained in a pure form., L. Peres thanks the University of Toulouse for financial support; D. Yi and A. Pierrot thank the ANR for financing the DENSAR project (ANR-14-CE07-0025-01). R. A. gratefully acknowledges support from the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26) and from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant no. MAT2016-79776-P (AEI/FEDER, UE). The HR-STEM tomography studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. The Government of Aragon and the European Social Fund are gratefully acknowledged. We gratefully acknowledge the International Associated Laboratory (LIA)-M2 OZART for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Green synthesis of cavity-containing manganese oxides with superior catalytic performance in toluene oxidation

  • García Martínez, Tomás
  • López Sebastián, José Manuel
  • Mayoral, Álvaro
  • Zhang, Yaping
  • Arenal, Raúl
  • Alonso-Domínguez, Daniel
  • Pico, María Pilar
  • López, María Luisa
  • Dejoz, Ana
  • Álvarez-Serrano, Inmaculada
  • Sanchis, Rut
  • Solsona, Benjamín
10 Figuras.- 2 Tablas.- Datos suplementarios disponibles en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Manganese oxide prepared by a simple hydrothermal method is highly active and stable in both lab and quasi industrial conditions for the total oxidation of toluene, achieving total conversion at only 175 °C in the absence of water and at 150 °C in the presence of 4 mol % water. Moreover, this performance is stable for at least 6 cycles. The enhanced catalytic performance has been related to the presence of highly reactive oxygen surface species. This species are probably promoted by Mn3O4 nanoparticles with Mn3+ at the tetragonal distorted cationic sites, likely compensated by structural water at the anionic sites. The presence of structural water can be related to the formation of internal cavities/vesicles in the Mn3O4 crystalline structure., AM and YZ acknowledge The Centre for High-resolution Electron Microscopy (CħEM), supported by SPST of ShanghaiTech University under contract No. EM02161943. Electron microscopy analyses were performed at Centre for High-Resolution Electron Microscopy (CћEM), ShanghaiTech University. AM acknowledges the National Natural Science Foundation of China through the projects NSFC NFSC-21850410448 and NSFC- 21835002. Authors from UCM thank Santander-UCM institution (PR41/17-20951 project) and MINECO (MAT2017-84118-C2-2-R project) and UCM CAI centers (XRD and EM). TG and JML thank Regional Aragon Government (DGA) under the research groups support programme. Some of the STEM analyses were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R. A. acknowledges support from Spanish MINECO grant MAT2016-79776-P (AEI/FEDER, UE), from the Government of Aragon and the European Social Fund (E13_17R, FEDER) and from the European Union H2020 program “ESTEEM3” (grant 823717) Authors from UV thank MINECO (MAT2017-84118-C2-1-R project) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Percolating metallic structures templated on laser-deposited carbon nanofoams derived from graphene oxide: applications in humidity sensing

  • Nufer, Sebastian
  • Fantanas, Dimitrios
  • Ogilvie, Sean P.
  • Large, Matthew J.
  • Winterauer, Dominik J.
  • Salvage, Jonathan P.
  • Meloni, Manuela
  • King, Alice A. K.
  • Schellenberger, Pascale
  • Shmeliov, Aleksey
  • Víctor-Román, Sandra
  • Peláez-Fernández, Mario
  • Nicolosi, Valeria
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Brunton, Adam
  • Dalton, Alan B.
5 Figuras.-- Información complementaria disponible en línea en la página web del editor, Carbon nanofoam (CNF) is a low-density, high-surface-area material formed by aggregation of amorphous carbon nanoparticles into porous nanostructures. We report the use of a pulsed infrared laser to prepare CNF from a graphene oxide (GO) target material. Electron microscopy shows that the films consist of dendritic strings that form web-like three-dimensional structures. The conductivity of these structures can be modified by using the CNF as a nanostructured scaffold for gold nanoparticles deposited by sputter coating, controllably increasing the conductivity by up to 4 orders of magnitude. The ability to measure the conductivity of the porous structures allows electrochemical measurements in the environment. Upon decreasing humidity, the pristine CNF exhibits an increase in resistance with a quick response and recovery time. By contrast, the gold-sputtered CNF showed a decrease in resistance, indicating modification of the doping mechanism due to water adsorption. The sensitivity to humidity is eliminated at the percolation threshold of the metal on the CNF., Graham Booth’s work is highly appreciated, helping to set up the deposition system. This work has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement 642742 as well as from EU H2020 program “Graphene Flagship” (Grant Agreement 696656). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (Grant MAT2016-79776-P, (AEI/FEDER, UE)), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (Grant E/26). A.M.B and W.K.M gratefully acknowledge the financial support from Spanish MINECO and AEI (Project ENE2016-79282-C5-1-R and associated EU Regional Development Funds) and the Gobierno de Aragón (Consolidated Group DGA-T66-GCNN and associated EU Social Funds). S.V.-R. thanks Spanish MINECO for her Ph.D. grant (BES2014-068727 and associated EU Social Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An overview of the recent advances in inorganic nanotubes

  • Serra, Marco
  • Arenal, Raúl
  • Tenne, Reshef
Advanced nanomaterials play a prominent role in nanoscience and nanotechnology developments, opening new frontiers in these areas. Among these nanomaterials, due to their unique characteristics and enhanced chemical and physical properties, inorganic nanotubes have been considered one of the most interesting nanostructures. In recent years, important progress has been achieved in the production and study of these nanomaterials, including boron nitride, transition metal dichalcogenide nanotubular structures, misfit-based nanotubes and other hybrid/doped nanotubular objects. This review is devoted to the in-depth analysis of recent studies on the synthesis, atomic structures, properties and applications of inorganic nanotubes and related nanostructures. Particular attention is paid to the growth mechanism of these nanomaterials. This is a crucial point for the challenges ahead related to the mass production of high-quality defect-free nanotubes for a variety of applications., R. T. acknowledges the support of the Israel Science Foundation (grant No. 7130970101). We also wish to acknowledge the Perlman Family Foundation; the Kimmel Center for Nanoscale Science Grant No. 43535000350000; and the Irving and Azelle Waltcher Foundations in honour of Prof. M. Levy Grant No. 720821. R. A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) and from the EU H2020 program “Graphene Flagship” (Grant Agreement 785219), the EU H2020 & APCIN-MICINN Spain (JTC-2017 Flag-ERA GATES project) and the EU H2020 program “ESTEEM3” (Grant Agreement 823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Au-MoS2 hybrids as hydrogen evolution electrocatalysts

  • Bar-Ziv, Ronen
  • Ranjan, Priyadarshi
  • Lavie, Anna
  • Jain, Akash
  • Garai, Somenath
  • Bar Hen, Avraham
  • Popovitz-Biro, Ronit
  • Tenne, Reshef
  • Arenal, Raúl
  • Ramasubramaniam, Ashwin
  • Lajaunie, Luc
  • Bar-Sadan, Maya
Core–shell nanoparticles provide a unique morphology to exploit electronic interactions between dissimilar materials, conferring upon them new or improved functionalities. MoS2 is a layered transition-metal disulfide that has been studied extensively for the hydrogen evolution reaction (HER) but still suffers from low electrocatalytic activity due to its poor electronic conductivity. To understand the fundamental aspects of the MoS2–Au hybrids with regard to their electrocatalytic activity, a single to a few layers of MoS2 were deposited over Au nanoparticles via a versatile procedure that allows for complete encapsulation of Au nanoparticles of arbitrary geometries. High-resolution transmission electron microscopy of the Au@MoS2 nanoparticles provides direct evidence for the core–shell morphology and also reveals the presence of morphological defects and irregularities in the MoS2 shell that are known to be more active for HER than the pristine MoS2 basal plane. Electrochemical measurements show a significant improvement in the HER activity of Au@MoS2 nanoparticles relative to freestanding MoS2 or Au-decorated MoS2. The best electrochemical performance was demonstrated by the Au nanostars—the largest Au core employed here—encapsulated in a MoS2 shell. Density-functional theory calculations show that charge transfer occurs from the Au to the MoS2 layers, producing a more conductive catalyst layer and a better electrode for electrochemical HER. The strategies to further improve the catalytic properties of such hybrid nanoparticles are discussed., We acknowledge the support of the Israel Science Foundation Grant No. 339/18; the Kimmel Center for Nanoscale Science Grant No. 43535000350000; the Irving and Azelle Waltcher Foundations in honor of Prof. M. Levy Grant No. 720821; and The Perlman Family Foundation. The HR-STEM and STEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R.A. acknowledges support from Spanish MINECO Grant No. MAT2016-79776-P (AEI/FEDER, UE) and from EU H2020 “Graphene Flagship” Grant Agreement 785219. A.J. and A.R. gratefully acknowledge research funding from the U.S. Department of Energy under Award No. DE-SC0010610 and computing support from the Massachusetts Green High-Performance Computing Center. This research was supported by a grant from the United States–Israel Binational Science Foundation (BSF), Jerusalem, Israel (2016/149)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chirality manifestation in elastic coupling between the layers of double-walled carbon nanotubes

  • Rochal, Sergei
  • Levshov, Dmitry
  • Avramenko, Marina
  • Arenal, Raúl
  • Cao, Thi Thanh
  • Nguyen, Van Chuc
  • Sauvajol, Jean-Louis
  • Paillet, Matthieu
The search for new relatively easy physicochemical methods for the structural identification of carbon nanotubes represents a key challenge. Here, analyzing the experimental data on double-walled carbon nanotubes (DWCNTs) obtained by us and taken from the literature, we have expressed the magnitude of elastic coupling between two tubular walls forming a DWCNT as a simple function dependent not only on DWCNT diameters but also on the difference between the chirality angles of the constituent nanotubes. To get this quite unexpected result, which allows us to relate more precisely the structural parameters of a DWCNT with frequencies of its radial breathing-like modes (RBLM), we have developed a new model for the RBLM dynamics that takes into account a possible deposition of water molecules from ambient air onto the DWCNT surface. The model constructed allows us to predict the higher prevalence of DWCNTs comprising two walls with identical handedness. The application of the results obtained for the identification of DWCNTs is also considered., S. R., D. L. and M. A. acknowledge financial support from the Russian Foundation for Basic Research (grant no. 18-29-19043 mk). The Government of Aragon, and the European Social Fund are gratefully acknowledged. R. A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E13/17R). R. A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bottom-up synthesized MoS 2 interfacing polymer carbon nanodots with electrocatalytic activity for hydrogen evolution

  • Kagkoura, Antonia
  • Canton-Vitoria, Rubén
  • Vallan, Lorenzo
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
  • Tagmatarchis, Nikos
5 Figuras, 1 Esquema, 1 Tabla .-- Información suplementaria disponible en la página web del editor., The preparation of MoS 2 ‐polymer carbon nanodot (MoS 2 ‐PCND) hybrid material was accomplished by employing an easy and fast bottom‐up synthetic approach. Specifically, MoS 2 ‐PCND was realized by the thermal decomposition of ammonium tetrathiomolybdate and the in‐situ complexation of Mo with carboxylic acid units present in the surface of PCNDs. The newly prepared hybrid material was comprehensively characterized by spectroscopic, thermal and electron microscopy imaging means. The electrocatalytic activity of MoS 2 ‐PCND was examined against the hydrogen evolution reaction (HER) and compared with that attributed to the hybrid material prepared by a top‐down approach, namely with MoS 2 ‐PCND(exf‐fun), in which MoS 2 was firstly exfoliated and then covalently functionalized with PCNDs. The MoS 2 ‐PCND hybrid material showed superior electrocatalytic activity against HER with low Tafel slope value and excellent electrocatalytic stability, with an onset potential at ‐0.16 V vs RHE. The superior catalytic performance of MoS 2 ‐PCND was rationalized by considering the catalytic active sites of MoS 2 , the effective charge/energy‐transfer phenomena from PCNDs to MoS 2 and the synergetic effect between MoS 2 and PCNDs within the hybrid material., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, which is implemented under the “Reinforcement of the Research and Innovation Infrastructures”, funded by the Operational Program "Competitiveness, Entrepreneurship and Innovation" (NSRF 2014-2020) and co-financed by Ministry of Development and Investments, Greece, and the European Union (European Regional Development Fund) is also acknowledged. A.M.B. and W.K.M. acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R, AEI/FEDER, UE) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE). The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E13_17R) and from the European Union H2020 programs “ESTEEM3” (823717) and under the “Graphene Flagship” CORE2 project grant agreement No 785219., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One-pot preparation of iron/alumina catalyst for the efficient growth of vertically-aligned carbon nanotube forests

  • Roussey, Arthur
  • Venier, Nicolas
  • Fneich, Hussein
  • Giardella, Lucas
  • Pinaud, Thomas
  • Tahir, Saïd
  • Peláez-Fernández, Mario
  • Arenal, Raúl
  • Mehdi, Ahmad
  • Jourdain, Vincent
The catalytic growth of vertically-aligned carbon nanotubes (VA-CNTs) forest usually requires thin catalyst films deposited by multi-step and costly physical vapor deposition techniques. Here, we demonstrate that an efficient catalyst and its supporting layer for VACNT growth can be prepared by using a simple solution of Fe(NO3)3 and Al(NO3)3 deposited on silica in a single step. This process being much simpler and cheaper than existing preparation methods, it can easily be transferred to industry for the low-cost, thin and large-area coating of catalyst for VA-CNT growth. Our study shows that aluminum hydroxides preferentially react with the SiO2 surface while iron hydroxides tend to form oxide or hydroxide nanoparticles, thus allowing preparation of an aluminum-based buffer layer with iron-based nanoparticles at its surface. Optimization of the Fe/Al ratio and salt concentrations yielded catalysts with performances similar to standard Fe/Al2O3 catalysts prepared by physical vapor deposition., The Government of Aragon, and the European Social Fund are gratefully acknowledged. R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26). R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE). Part of this work has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sonochemical edge functionalisation of molybdenum disulfide

  • Amorim Graf, Aline
  • Large, Matthew J.
  • Ogilvie, Sean P.
  • Rong, Yuanyang
  • Lynch, Peter J.
  • Fratta, Giuseppe
  • Ray, Santanu
  • Shmeliov, Aleksey
  • Nicolosi, Valeria
  • Arenal, Raúl
  • King, Alice A. K.
  • Dalton, Alan B.
Liquid-phase exfoliation (LPE) has been shown to be capable of producing large quantities of high-quality dispersions suitable for processing into subsequent applications. LPE typically requires surfactants for aqueous dispersions or organic solvents with high boiling point. However, they have major drawbacks such as toxicity, aggregation during solvent evaporation or the presence of residues. Here, dispersions of molybdenum disulfide in acetone are prepared and show much higher concentration and stability than predicted by Hansen parameter analysis. Aiming to understand these enhanced properties, the nanosheets were characterised using UV-visible spectroscopy, zeta potential measurements, atomic force microscopy, Raman spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and scanning transmission microscopy combined with spatially-resolved electron energy loss spectroscopy. Also, the performance of the MoS2 nanosheets exfoliated in acetone was compared to that of those exfoliated in isopropanol as a catalyst for the hydrogen evolution reaction. The conclusion from the chemical characterisation was that MoS2 nanosheets exfoliated in acetone have an oxygen edge functionalisation, in the form of molybdenum oxides, changing its interaction with solvents and explaining the observed high-quality and stability of the resulting dispersion in a low boiling point solvent. Exfoliation in acetone could potentially be applied as a pretreatment to modify the solubility of MoS2 by edge functionalisation., The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA) – Universidad de Zaragoza (Spain). This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 642742 and under the “Graphene Flagship” project grant agreement no. 785219. R. A. also acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E13_17R). VN wishes to thank the support of SFI (AMBER and I-Form centres, PIYRA and US-Ireland grants) and the ERC CoG (3D2DPrint)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sulfur-doped graphene/transition metal dichalcogenide heterostructured hybrids with electrocatalytic activity toward the hydrogen evolution reaction

  • Kagkoura, Antonia
  • Peláez-Fernández, Mario
  • Arenal, Raúl
  • Tagmatarchis, Nikos
A facile route for the preparation of molybdenum disulfide (MoS2) and tungsten disulfide (WS2), uniformly deposited onto sulfur-doped graphene (SG), is reported. The realization of the SG/MoS2 and SG/WS2 heterostructured hybrids was accomplished by employing microwave irradiation for the thermal decomposition of ammonium tetrathiomolybdate and tetrathiotungstate, respectively, in the presence of SG. Two different weight ratios between SG and the inorganic species were used, namely 3 : 1 and 1 : 1, yielding SG/MoS2 (3 : 1), SG/MoS2 (1 : 1), SG/WS2 (3 : 1) and SG/WS2 (1 : 1). SG and all newly developed hybrid materials were characterized by ATR-IR and Raman spectroscopy, TGA, HR-TEM and EELS. The electrocatalytic activity of the SG/MoS2 and SG/WS2 heterostructured hybrids was examined against the hydrogen evolution reaction (HER) and it was found that the presence of SG not only significantly improved the catalytic activity of MoS2 and WS2 but also made it comparable to that of commercial Pt/C. Specifically, hybrids containing higher amounts of SG, namely SG/MoS2 (3 : 1) and SG/WS2 (3 : 1), exhibited extremely low onset overpotentials of 26 and 140 mV vs. RHE, respectively. The latter results highlighted the beneficial role of SG as a substrate for immobilizing MoS2 and WS2 and stressed its significance for achieving optimum electrocatalytic performance toward the HER. Finally, examination of the Tafel slopes as extracted from the electrocatalytic polarization curves, manifested the adsorption of hydrogen as the rate-limiting step for SG/MoS2 (3 : 1), while for SG/WS2 (3 : 1) the electrochemical desorption of adsorbed hydrogen atoms to generate hydrogen was revealed to be the rate-limiting step., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 642742. Partial support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014-2020) and co-financed by Greece and the European Union (European Regional Development Fund) is also acknowledged. The HR-TEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R. A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project MAT2016-79776-P (AEF/FEDER. UE), the Government of Aragon and ESF under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E13_17R), and from the EU H2020 program “Graphene Flagship” (Grant Agreement 785219)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrathin lead bromide perovskite platelets spotted with europium(ii) bromide dots

  • Rosa-Pardo, Ignacio
  • Pocoví-Martínez, Salvador
  • Arenal, Raúl
  • Galian, Raquel E.
  • Pérez-Prieto, Julia
We describe here the preparation of a novel nanohybrid comprising a two-layer cesium lead bromide nanoplatelet, [CsPbBr3]PbBr4 NPL, containing europium(II) bromide (EuBr2) nanodots, by ultrasound/heating treatment of toluene dispersions of the CsPbBr3 nanomaterial in the presence of EuBr2 nanodots. The hybrid nanoplatelets exhibit strong excitonic and narrow emission peaks characteristic of ultrathin NPLs at 430 and 436 nm, respectively., We thank MINECO (CTQ2017-82711-P and FPU for I.R-P), partially co-financed with FEDER funds; MAT2016-79776-P, Maria de Maeztu: MDM-2015-0538) for financing this research. RA also acknowledges Government of Aragon and ESF under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E13_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Determination of the evolution of heterogeneous single metal atoms and nanoclusters under reaction conditions: Which are the working catalytic sites?

  • Liu, Lichen
  • Meira, Debora M.
  • Arenal, Raúl
  • Concepción, Patricia
  • Puga, Alberto V.
  • Corma, Avelino
Identification of active sites in heterogeneous metal catalysts is critical for understanding the reaction mechanism at the molecular level and for designing more efficient catalysts. Because of their structural flexibility, subnanometric metal catalysts, including single atoms and clusters with a few atoms, can exhibit dynamic structural evolution when interacting with substrate molecules, making it difficult to determine the catalytically active sites. In this work, Pt catalysts containing selected types of Pt entities (from single atoms to clusters and nanoparticles) have been prepared, and their evolution has been followed, while they were reacting in a variety of heterogeneous catalytic reactions, including selective hydrogenation reactions, CO oxidation, dehydrogenation of propane, and photocatalytic H2 evolution reaction. By in situ X-ray absorption spectroscopy, in situ IR spectroscopy, and high-resolution electron microscopy techniques, we will show that some characterization techniques carried out in an inadequate way can introduce confusion on the interpretation of coordination environment of highly dispersed Pt species. Finally, the combination of catalytic reactivity and in situ characterization techniques shows that, depending on the catalyst–reactant interaction and metal–support interaction, singly dispersed metal atoms can rapidly evolve into metal clusters or nanoparticles, being the working active sites for those abovementioned heterogeneous reactions., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the “Severo Ochoa Program” (SEV-2016-0683). L.L. thanks ITQ for providing a contract. The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, and was supported by the U.S. DOE under contract no. DE-AC02-06CH11357 and the Canadian Light Source and its funding partners. The HR STEM and STEM–EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R.A. acknowledges support from Spanish MINECO grant MAT2016-79776-P (AEI/FEDER, UE), from the Government of Aragon and the European Social Fund (grant number E13_17R, FEDER, UE), and from the European Union H2020 program “ESTEEM3” (grant number 823717). A.V.P. thanks the Spanish Government (Agencia Estatal de Investigación) and the European Union (European Regional Development Fund) for a grant for young researchers (CTQ2015-74138-JIN, AEI/FEDER/UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Low-Temperature Catalytic NO Reduction with CO by Subnanometric Pt Clusters

  • Fernández, E.
  • Liu, Lichen
  • Boronat, Mercedes
  • Arenal, Raúl
  • Concepción, Patricia
  • Corma, Avelino
The catalytic subnanometric metal clusters with a few atoms can be regarded as an intermediate state between single atoms and metal nanoparticles (>1 nm). Their molecule-like electronic structures and flexible geometric structures bring rich chemistry and also a different catalytic behavior, in comparison with the single-atom or nanoparticulate counterparts. In this work, by combination of operando IR spectroscopy techniques and electronic structure calculations, we will show a comparative study on Pt catalysts for CO + NO reaction at a very low temperature range (140–200 K). It has been found that single Pt atoms immobilized on MCM-22 zeolite are not stable under reaction conditions and agglomerate into Pt nanoclusters and particles, which are the working active sites for CO + NO reaction. In the case of the catalyst containing Pt nanoparticles (∼2 nm), the oxidation of CO to CO2 occurs in a much lower extension, and Pt nanoparticles become poisoned under reaction conditions because of a strong interaction with CO and NO. Therefore, only subnanometric Pt clusters allow NO dissociation at a low temperature and CO oxidation to occur well on the surface, while CO interaction is weak enough to avoid catalyst poisoning, resulting in a good balance to achieve enhanced catalytic performance., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the “Severo Ochoa Program” (SEV-2016-0683) and MAT2017-82288-C2-1-P projects. L.L. thanks ITQ for providing a contract. E.F. thanks MINECO for her fellowship SVP-2013-068146. The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. The HRSTEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R.A. acknowledges support from Spanish MINECO grant MAT2016-79776-P (AEI/FEDER, UE), from the Government of Aragon and the European Social Fund (grant number E13_17R, FEDER, UE), and from the European Union H2020 program “ESTEEM3” (grant number 823717). Red Española de Supercomputación (RES) and Centre de Càlcul de la Universitat de Valencia are acknowledged for computational resources and technical support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Investigating the possible origin of Raman bands in defective sp2/sp3 carbons below 900 cm−1: Phonon density of states or double resonance mechanism at play?

  • Pardanaud, Cedric
  • Cartry, Gilles
  • Lajaunie, Luc
  • Arenal, Raúl
  • Buijnsters, Josephus Gerardus
This article belongs to the Special Issue Characterization of Disorder in Carbons., Multiwavelength Raman spectroscopy (325, 514, 633 nm) was used to analyze three different kinds of samples containing sp2 and sp3 carbons: chemical vapor deposited diamond films of varying microstructure, a plasma-enhanced chemical vapor deposited hydrogenated amorphous carbon film heated at 500 °C and highly oriented pyrolytic graphite exposed to a radio-frequent deuterium plasma. We found evidence that the lower part of the phonon density of states (PDOS) spectral region (300–900 cm−1) that rises when defects are introduced in crystals can give more information on the structure than expected. For example, the height of the PDOS, taken at 400 cm−1 and compared to the height of the G band, depends on the sp2 content, estimated by electron energy-loss spectroscopy. This ratio measured with 633 nm laser is more intense than with 514 nm laser. It is also correlated for diamond to the relative intensity ratio between the diamond band at 1332 cm−1 and the G band at ≈1500–1600 cm−1 when using 325 nm laser. Moreover, it is found that the shape of the PDOS of the exposed graphite samples is different when changing the wavelength of the laser used, giving evidence of a double resonance mechanism origin with the rise of the associated D3, D4 and D5 bands, which is not the case for a-C:H samples., R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P) and from the European Union H2020 program “ESTEEM3” (823717)."., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemical ordering in bimetallic FeCo nanoparticles: From a direct chemical synthesis to application as efficient high-frequency magnetic material

  • Garnero, Cyril
  • Soulantica, Katerina
  • Fau, Pierre
  • Poveda, Patrick
  • Lacroix, Lise-Marie
  • Chaudret, Bruno
  • Lepesant, Mathieu
  • Garcia-Marcelot, Cecile
  • Shin, Yooleemi
  • Meny, Christian
  • Fuger, Pierre
  • Warot-Fonrose, Bénédicte
  • Arenal, Raúl
  • Viau, Guillaume
Single-crystalline FeCo nanoparticles with tunable size and shape were prepared by co-decomposing two metal-amide precursors under mild conditions. The nature of the ligands introduced in this organometallic synthesis drastically affects the reactivity of the precursors and, thus, the chemical distribution within the nanoparticles. The presence of the B2 short-range order was evidenced in FeCo nanoparticles prepared in the presence of HDAHCl ligands, combining 57Fe Mössbauer, zero-field 59Co ferromagnetic nuclear resonance (FNR), and X-ray diffraction studies. This is the first time that the B2 structure is directly formed during synthesis without the need of any annealing step. The as-prepared nanoparticles exhibit magnetic properties comparable with the ones for the bulk (Ms = 226 Am2·kg¿1). Composite magnetic materials prepared from these FeCo nanoparticles led to a successful proof-of-concept of the integration on inductor-based filters (27% enhancement of the inductance value at 100 MHz)., This work was performed in the frame of TOURS 2015, and the project was supported by the French “Programme de l’économie numérique des Investissements d’Avenir”. We gratefully acknowledge the International Associated Laboratory (LIA)-M2OZART for financial support. Some of the HR-STEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project MAT2016-79776-P (AEF/FEDER. UE). In IPCMS Strasbourg, the work was supported by the CNRS LIA “NANOFUNC” and the LABEX NIE (no. ANR-11-LABX-0058_NIE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One-pot seed-mediated growth of Co nanoparticles by the polyol process: Unraveling the heterogeneous nucleation

  • Kumar Ramamoorthy, Raj
  • Viola, Arnaud
  • Grindi, Bilel
  • Peron, Jennifer
  • Gatel, Christophe
  • Hytch, Martin
  • Arenal, Raúl
  • Sicard, Lorette
  • Giraud, Marion
  • Piquemal, Jean-Yves
  • Viau, Guillaume
The one-step seed-mediated synthesis is widely used for the preparation of ferromagnetic metal nanoparticles (NPs) since it offers a good control of particle morphology. Nevertheless, this approach suffers from a lack of mechanistic studies because of the difficulties of following in real time the heterogeneous nucleation and predicting structure effects with seeds that are generated in situ. Here, we propose a complete scheme of the heteronucleation process involved in one-pot seed-mediated syntheses of cobalt nanoparticles in liquid polyols, relying on geometrical phase analysis (GPA) of high-resolution high-angle annular dark field (HAADF)-STEM images and in situ measurements of the molecular hydrogen evolution. Cobalt particles of different shapes (rods, platelets, or hourglass-like particles) were grown by reducing cobalt carboxylate in liquid polyols in the presence of iridium or ruthenium chloride as the nucleating agent. A reaction scheme was established by monitoring the H2 evolution resulting from the decomposition of metal hydrides, formed in situ by β-elimination of metal alkoxides, and from the polyol dehydrogenation, catalytically activated by the metal particles. This is a very good probe for both the noble metal nucleation and the heterogeneous nucleation of cobalt, showing a good separation of these two steps. Ir and Ru seeds with a size in the range 1–2 nm were found exactly in the center of the cobalt particles, whatever the cobalt particle shape, and high-resolution images revealed an epitaxial growth of the hcp Co on fcc Ir or hcp Ru seeds. The microstructure analysis around the seeds made evident two different ways of relaxing the lattice mismatch between the seeds and the cobalt, with the presence of dislocations around the Ir seeds and compression zones of the cobalt lattice near the Ru seeds. The relationship between the nature of the nucleating agent, the reaction steps, and the microstructure is discussed., This work was funded by the French National Research Agency, ANR, in the framework of the TANOPOL project (ANR-15-CE07-0011-01). Angélique Gillet is warmly thanked for the nanoparticle synthesis, and Lucien Datas and Teresa Hungria (Plateforme Castaing, Toulouse) are thanked for HAADF-STEM images. We gratefully acknowledge the International Associated Laboratory (LIA)-M2ZART for financial support. High-resolution HAADF-STEM images were performed at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through Project MAT2016-79776-P (AEF/FEDER. UE) and from the European Union H2020 program “ESTEEM3” (823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One-dimensional V2O5/TiO2 heterostructures for chemiresistive ozone sensors

  • Avansi, Waldir Jr.
  • Catto, Ariadne C.
  • Silva, Luis F. da
  • Fiorido, Tomas
  • Bernardini, Sandrine
  • Mastelaro, Valmor R.
  • Aguir, Khalifa
  • Arenal, Raúl
Over the last decades, there has been considerable interest in the synthesis of one-dimensional (1D) metal oxide nanostructures that can be used in gas sensor devices. Heterostructures, obtained by a combination of different semiconductor nanomaterials with different band energies, have been extensively studied in order to enhance their gas-sensing performance. In this context, our present study focuses on the investigation of chemiresistive-sensing capabilities of a combination of TiO2 nanoparticles and V2O5 nanowires obtained via hydrothermal treatment of the peroxo-metal complex. The formation of V2O5/TiO2 heterostructures was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) measurements. This study also proposes an efficient approach to produce 1D V2O5/TiO2 heterostructures with a good range of detection (0.09–1.25 ppm) and remarkable ozone-sensing properties related to repeatability and selectivity., The authors gratefully acknowledge the financial support of the Brazilian research funding agencies FAPESP (under grant number FAPEP 2013/17639-4, 2013/07296-2, 17/18649-4, and 2017/12437-5), CNPq (311463/2017-7), and CAPES (Financial Code 001). Transmission electron microscopy (TEM-21464) and X-ray photoelectron spectroscopy (XPS20607 and XPS-21082) were performed at the LME/ LNNano/CNPEM. The electrodes used for the gas-sensing experiments were fabricated in the Laboratory of Microfabrication at the LNNano/CNPEM (Projects LMF-18580). The STEM-EELS and HRTEM measurements were performed in the Advanced Microscopy Laboratory (LMA) at the Institute of Nanoscience of Aragon (INA), University of Zaragoza (Spain). R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MAT2016-79776-P) and the Government of Aragon through projct DGA E13_17R (FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

STEM-EELS analysis of Fe3O4@CoFe2O4@Fe3O4 core-shell-shell nanoparticles

  • Hettler, Simon
  • Sartori, Kevin
  • Pichon, B.
  • Arenal, Raúl
Resumen del trabajo presentado al Microscopy at the Frontiers of Science Congress Series (MFS), celebrado en el Parque de las Ciencias de Granada (España) del 11 al 13 de septiembre de 2019., Research supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), Government of Aragon through project DGA E13_17R (FEDER, EU), European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC 2017), French Agence Nationale de la Recherche (ANR-11-LABX-0058-NIE) and SOLEIL synchrotron / Laboratoire Léon Brilluoin fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Detailed atomic structure analyses of N-doped nanodiamonds

  • Arenal, Raúl
  • Hage, F.
  • Ramasse, Q.
  • Gruen, D. M.
Resumen del trabajo presentado al Microscopy at the Frontiers of Science Congress Series (MFS), celebrado en el Parque de las Ciencias de Granada (España) del 11 al 13 de septiembre de 2019., Research supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), Government of Aragon through project DGA E13_17R (FEDER, EU) and European Union H2020 programs “ESTEEM3” (823717) and Flag-ERA GATES (JTC 2017)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Transmission electron microscopy investigation of graphene oxide flakes

  • Hettler, Simon
  • Valenzuela, David S.
  • Arenal, Raúl
Resumen del póster presentado al Microscopy at the Frontiers of Science Congress Series (MFS), celebrado en el Parque de las Ciencias de Granada (España) del 11 al 13 de septiembre de 2019., A significant amount of research has been done on (reduced) graphene oxide ((r)GO) due to its controllable properties and because it is widely used as a starting point for graphene production and functionalization. Although the chemical model of GO is very complex, it is well established that its properties are mainly controlled by the different functional groups present, the percentage of incorporated oxygen and the ratio between sp2 and sp3-hybridized C bonds. Here we present our experimental results on transmission electron microscopy (TEM) investigation of GO acquired with an image-corrected FEI Titan3 operated at 80 kV. Using TEM imaging, electron diffraction and electron energy-loss spectroscopy (EELS), GO can be characterized in detail and properties such as composition, size, thickness or fraction of sp2-hybridized C bonds can be determined with high spatial resolution. Three EEL spectra showing the background-corrected C-K edge of different GO flakes are depicted in Figure 1. The C-K edge exhibits a sharp pre-peak at 285 eV, whose intensity corresponds to the fraction of sp2-hybridized C bonds, followed by a set of peaks associated to different oxidized functional groups and a broad peak starting at 290 eV. While the black line shows a spectra of a highly oxidized flake (17 %), the red and green curve were obtained from flakes with a low oxygen content. In summary, TEM-EELS is highly suited for an in-depth analysis of GO. The obtained information on structure, composition and alien material present in the GO allows to better understand the macroscopic properties of GO and its use in applications., Research supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), Government of Aragon through project DGA E13_17R (FEDER, EU) and European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC 2017) and Graphene Flagship (785219).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anisotropic Au-ZnO photocatalyst for the visible-light expanded oxidation of n-hexane

  • Bueno-Alejo, Carlos
  • Graus, Javier
  • Arenal, Raúl
  • Lafuente, Marta
  • Bottega‐Pergher, Bruno
  • Hueso, José L.
In this work we present a novel metal-semiconductor heterostructure that contains triangular and prism-shaped plasmonic gold nanostructures directly synthesized and assembled onto ZnO nanostructures. Spatially-resolved (SR) high-resolution electron energy loss spectroscopy (EELS) at the local (sub-nanometer scale) level confirmed the field enhancement of the local electromagnetic fields in the surroundings of the triangular and prism-shaped Au nanostructures and in the interfacial junction between Au and ZnO. Different LED excitation sources have been systematically selected in the whole UV–vis-NIR range to evaluate the photocatalytic response of the Au-ZnO heterostructures towards the oxidation of n-hexane, selected as a model VOC present in indoor environments. The Au-ZnO exhibits visible expanded photo-response with the more energetic interband and intraband electrons and the higher LED irradiation wavelengths and it is able to outperform its ZnO plain counterpart., Financial support from the European Research Council (ERC Advanced Grant CADENCE number 742684) is gratefully acknowledged. We also acknowledge the support from CIBER-BBN and MINECO (Spain) with project CTQ2016-79419-R. R.A. acknowledges funding from the Spanish Ministerio de Ciencia, Innovación y Universidades (project grant MAT2016-79776-P (AEI/FEDER, UE)) and from the European Union H2020 program “ESTEEM3” (823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Light-induced sulfur transport inside single-walled carbon nanotubes

  • Sedelnikova, Olga V.
  • Gurova, Olga A.
  • Makarova, Anna A.
  • Fedorenko, Anastasiya D.
  • Nikolenko, Anton D.
  • Plyusnin, Pavel E.
  • Arenal, Raúl
  • Bulusheva, Lyubov G.
  • Okotrub, Alexander V.
This article belongs to the Section 2D and Carbon Nanomaterials., Filling of single-walled carbon nanotubes (SWCNTs) and extraction of the encapsulated species from their cavities are perspective treatments for tuning the functional properties of SWCNT-based materials. Here, we have investigated sulfur-modified SWCNTs synthesized by the ampoule method. The morphology and chemical states of carbon and sulfur were analyzed by transmission electron microscopy, Raman scattering, thermogravimetric analysis, X-ray photoelectron and near-edge X-ray absorption fine structure spectroscopies. Successful encapsulation of sulfur inside SWCNTs cavities was demonstrated. The peculiarities of interactions of SWCNTs with encapsulated and external sulfur species were analyzed in details. In particular, the donor–acceptor interaction between encapsulated sulfur and host SWCNT is experimentally demonstrated. The sulfur-filled SWCNTs were continuously irradiated in situ with polychromatic photon beam of high intensity. Comparison of X-ray spectra of the samples before and after the treatment revealed sulfur transport from the interior to the surface of SWCNTs bundles, in particular extraction of sulfur from the SWCNT cavity. These results show that the moderate heating of filled nanotubes could be used to de-encapsulate the guest species tuning the local composition, and hence, the functional properties of SWCNT-based materials., This work was supported by the Russian Science Foundation (Project 18-72-00017), the bilateral Program “Russian-Germany Laboratory at BESSY II” in the part of XPS and C K-edge NEXAFS measurements, and shared research center SSTRC on the basis of the Novosibirsk VEPP-4 - VEPP-2000 complex at BINP SB RAS, using equipment supported by project RFMEFI62119X0022 in the part of S K-edge NEXAFS measurements. R.A. acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P, AEI/FEDER, EU), from the European Union’s Horizon 2020 programme under the project “ESTEEM3” (823717) and from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E13_17R, FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One‐pot cooperation of single‐aom Rh and Ru solid catalysts for a selective tandem olefin isomerization‐hydrosilylation process

  • Sarma, Bidyut B.
  • Kim, Jonglack
  • Amsler, Jonas
  • Agostini, Giovanni
  • Weidenthaler, Claudia
  • Pfänder, Norbert
  • Arenal, Raúl
  • Concepción, Patricia
  • Plessow, Philipp
  • Studt, Felix
  • Prieto, Gonzalo
Realizing the full potential of oxide‐supported single‐atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one‐pot combination of Ru1/CeO2 and Rh1/CeO2 SACs enables a highly selective olefin isomerization‐hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double‐bond migration and anti‐Markovnikov α‐olefin hydrosilylation, respectively. First‐principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single‐pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio‐selectivity (>95 %) even from industrially‐relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide‐supported single‐atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes., R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016‐79776‐P (AEI/FEDER, UE) and from the European Union H2020 programs “ESTEEM3” (823717). The authors acknowledge support by the state of Baden‐Württemberg through bwHPC (bwUnicluster and JUSTUS, RV bw17D01), by the GRK 2450 and by the Helmholtz Association. This research received funding from the Max Planck Society, and the Fonds der Chemische Industrie of Germany. Funding from the Spanish Ministry of Science, Innovation and Universities (Severo Ochoa program SEV‐2016‐0683 and grant RTI2018‐096399‐A‐I00) is also acknowledged. B.B.S. acknowledges the Alexander von Humboldt Foundation for a postdoctoral scholarship. Open Access funding is provided by the Max Planck Society., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ping‐pong energy transfer in covalently linked porphyrin‐MoS2 architectures

  • Canton-Vitoria, Rubén
  • Scharl, Tobias
  • Stergiou, Anastasios
  • Cadranel, Alejandro
  • Arenal, Raúl
  • Guldi, Dirk M.
  • Tagmatarchis, Nikos
Molybdenum disulfide nanosheets covalently modified with porphyrin were prepared and fully characterized. Neither the porphyrin absorption nor its fluorescence was notably affected by covalent linkage to MoS2. The use of transient absorption spectroscopy showed that a complex ping‐pong energy‐transfer mechanism, namely from the porphyrin to MoS2 and back to the porphyrin, operated. This study reveals the potential of transition‐metal dichalcogenides in photosensitization processes., This project has received funding from EC H2020 under the Marie Sklodowska‐Curie grant agreement No. 642742. HRSTEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016‐79776‐P (AEI/FEDER, UE) and from EC H2020 programs “Graphene Flagship” (785219), FLAG‐ERA—“GATES” (JTC‐PCI2018‐093137) and “ESTEEM3” (823717). R.A. also acknowledges Government of Aragon under the project “Construyendo Europa desde Aragon” 2014‐2020 (grant number E13_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pyrene coating transition metal disulfides as protection from photooxidation and environmental aging

  • Canton-Vitoria, Rubén
  • Sayed-Ahmad-Baraza, Yuman
  • Humbert, Bernard
  • Arenal, Raúl
  • Ewels, Christopher P.
  • Tagmatarchis, Nikos
This article belongs to the Section Nanocomposite Materials., Environmental degradation of transition metal disulfides (TMDs) is a key stumbling block in a range of applications. We show that a simple one-pot non-covalent pyrene coating process protects TMDs from both photoinduced oxidation and environmental aging. Pyrene is immobilized non-covalently on the basal plane of exfoliated MoS2 and WS2. The optical properties of TMD/pyrene are assessed via electronic absorption and fluorescence emission spectroscopy. High-resolution scanning transmission electron microscopy coupled with electron energy loss spectroscopy confirms extensive pyrene surface coverage, with density functional theory calculations suggesting a strongly bound stable parallel-stacked pyrene coverage of ~2–3 layers on the TMD surfaces. Raman spectroscopy of exfoliated TMDs while irradiating at 0.9 mW/4 μm2 under ambient conditions shows new and strong Raman bands due to oxidized states of Mo and W. Yet remarkably, under the same exposure conditions TMD/pyrene remain unperturbed. The current findings demonstrate that pyrene physisorbed on MoS2 and WS2 acts as an environmental barrier, preventing oxidative surface reactions in the TMDs catalyzed by moisture, air, and assisted by laser irradiation. Raman spectroscopy confirms that the hybrid materials stored under ambient conditions for two years remained structurally unaltered, corroborating the beneficial role of pyrene for not only hindering oxidation but also inhibiting aging., This research was funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742, under the “Graphene Flagship” project grant agreement No 785219 and under the ESTEEM-3 project grant agreement No 823717. This research was also partially funded by the project “Advanced Materials and Devices” (MIS 5002409), which is implemented under the “Action for the Strategic Development on the Research and Technological Sector” funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014–2020) and co-financed by Greece and the European Union (European Regional Development Fund). This work was supported by the COST Action CA15107 MultiComp. This research was also supported by the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E13_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

YS-TaS2 and YxLa1–xS-TaS2 (0 ≤ x ≤ 1) nanotubes: A family of misfit layeredcompounds

  • Hettler, Simon
  • Sreedhara, M. B.
  • Serra, Marco
  • Sinha, Sudarson S.
  • Popovitz-Biro, Ronit
  • Pinkas, Iddo
  • Enyashin, Andrey N.
  • Tenne, Reshef
  • Arenal, Raúl
We present the analysis of a family of nanotubes (NTs) based on the quaternary misfit layered compound (MLC) YxLa1–xS-TaS2. The NTs were successfully synthesized within the whole range of possible compositions via the chemical vapor transport technique. In-depth analysis of the NTs using electron microscopy and spectroscopy proves the in-phase (partial) substitution of La by Y in the (La,Y)S subsystem and reveals structural changes compared to the previously reported LaS-TaS2 MLC-NTs. The observed structure can be linked to the slightly different lattice parameters of LaS and YS. Raman spectroscopy and infrared transmission measurements reveal the tunability of the plasmonic and vibrational properties. Density-functional theory calculations showed that the YxLa1–xS-TaS2 MLCs are stable in all compositions. Moreover, the calculations indicated that substitution of La by Sc atoms is electronically not favorable, which explains our failed attempt to synthesize these MLC and NTs thereof., A.E. acknowledges the support by Act 211 Government of the Russian Federation, Contract No. 02.A03.21.0006. The support of the Israel Science Foundation (Grant No. 7130970101), Irving and Cherna Moskowitz Center for Nano and Bio-Nano Imaging, and the Perlman Family Foundation and the Kimmel Center for Nanoscale Science (Grant No. 43535000350000) is greatly acknowledged. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through Project Grant MAT2016-79776-P (AEI/FEDER, UE) and from the European Union H2020 program “ESTEEM3” (823717). S.H. acknowledges funding by the German Research Foundation (HE 7675/1-1). I.P. is the incumbent of the Sharon Zuckerman Research Fellow Chair., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laser-deposited carbon aerogel derived from graphene oxide enables NO2-selective parts-per-billion sensing

  • Nufer, Sebastian
  • Lynch, Peter J.
  • Large, Matthew J.
  • Ogilvie, Sean P.
  • Salvage, Jonathan P.
  • Peláez-Fernández, Mario
  • Waters, Thomas
  • Jurewicz, Izabela
  • Muñoz, Edgar
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Tagmatarchis, Nikos
  • Ewels, Christopher P.
  • Brunton, Adam
  • Dalton, Alan B.
4 figures., Laser-deposited carbon aerogel is a low-density porous network of carbon clusters synthesized using a laser process. A one-step synthesis, involving deposition and annealing, results in the formation of a thin porous conductive film which can be applied as a chemiresistor. This material is sensitive to NO2 compared to ammonia and other volatile organic compounds and is able to detect ultra-low concentrations down to at least 10 parts-per-billion. The sensing mechanism, based on the solubility of NO2 in the water layer adsorbed on the aerogel, increases the usability of the sensor in practically relevant ambient environments. A heating step, achieved in tandem with a microheater, allows the recovery to the baseline, making it operable in real world environments. This, in combination with its low cost and scalable production, makes it promising for Internet-of-Things air quality monitoring., This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 642742. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through Project Grant MAT2016-79776-P (AEI/FEDER, UE) and from the European Union H2020 programs “ESTEEM3” (823717), Flagship Graphene (881603), FLAG-ERA - Graphene (MICINN) GATES (PCI2018-093137). WKM and ABM further acknowledge the Gobierno de Aragon (Grupos Reconocidos DGA T03_17R (FEDER, UE) and T03_20R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One-pot cooperation of single-atom Rh and Ru solid catalysts for a selective tandem olefin isomerization-hydrosilylation process

  • Sarma, Bidyut B.
  • Kim, Jonglack
  • Amsler, Jonas
  • Agostini, Giovanni
  • Weidenthaler, Claudia
  • Pfänder, Norbert
  • Arenal, Raúl
  • Concepción, Patricia
  • Plessow, Philipp
  • Studt, Felix
  • Prieto, Gonzalo
Realizing the full potential of oxide‐supported single‐atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one‐pot combination of Ru1/CeO2 and Rh1/CeO2 SACs enables a highly selective olefin isomerization‐hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double‐bond migration and anti‐Markovnikov α‐olefin hydrosilylation, respectively. First‐principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single‐pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio‐selectivity (>95 %) even from industrially‐relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide‐supported single‐atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes., X‐ray absorption experiments were performed at the ALBA Synchrotron Light Source (Spain), experiments 2018082961 and 2019023278. L. Simonelli and C. Marini (CLAESS‐ALBA beamline) are thanked for beamline setup. E. Andrés, M. E. Martínez, M. García, and I. López (ITQ), are acknowledged for their assistance with XAS experiments. J. Büscher, J. Ternedien, B. Spliethoff, and C. Wirtz (MPI‐KOFO) are acknowledged for the performance of XPS, XRD, BF‐TEM and 2H NMR experiments, respectively. I. C. de Freitas (MPI‐KOFO) is thanked for assistance with Raman spectroscopy. J. M. Salas (ITQ) is gratefully acknowledged for his contribution to CO‐FTIR experiments. J. J. Barnes and Shell (Amsterdam) are acknowledged for kindly providing an industrial olefin mixture as feed. Authors are thankful to F. Schüth for the provision of lab space and continued support. Part of the HRSTEM and EDX‐STEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016‐79776‐P (AEI/FEDER, UE) and from the European Union H2020 programs “ESTEEM3” (823717). The authors acknowledge support by the state of Baden‐Württemberg through bwHPC (bwUnicluster and JUSTUS, RV bw17D01), by the GRK 2450 and by the Helmholtz Association. This research received funding from the Max Planck Society, and the Fonds der Chemische Industrie of Germany. Funding from the Spanish Ministry of Science, Innovation and Universities (Severo Ochoa program SEV‐2016‐0683 and grant RTI2018‐096399‐A‐I00) is also acknowledged. B.B.S. acknowledges the Alexander von Humboldt Foundation for a postdoctoral scholarship. Open Access funding is provided by the Max Planck Society.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One-Pot Cooperation of Single-Atom Rh and Ru Solid Catalysts for a Selective Tandem Olefin Isomerization-Hydrosilylation Process

  • Sarma, Bidyut B.
  • Kim, Jonglack
  • Amsler, Jonas
  • Agostini, Giovanni
  • Weidenthaler, Claudia
  • Pfänder, Norbert
  • Arenal, Raúl
  • Concepción, Patricia
  • Plessow, Philipp
  • Studt, Felix
  • Prieto, Gonzalo
Realizing the full potential of oxide‐supported single‐atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one‐pot combination of Ru1/CeO2 and Rh1/CeO2 SACs enables a highly selective olefin isomerization‐hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double‐bond migration and anti‐Markovnikov α‐olefin hydrosilylation, respectively. First‐principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single‐pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio‐selectivity (>95 %) even from industrially‐relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide‐supported single‐atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes., X‐ray absorption experiments were performed at the ALBA Synchrotron Light Source (Spain), experiments 2018082961 and 2019023278. L. Simonelli and C. Marini (CLAESS‐ALBA beamline) are thanked for beamline setup. E. Andrés, M. E. Martínez, M. García, and I. López (ITQ), are acknowledged for their assistance with XAS experiments. J. Büscher, J. Ternedien, B. Spliethoff, and C. Wirtz (MPI‐KOFO) are acknowledged for the performance of XPS, XRD, BF‐TEM and 2H NMR experiments, respectively. I. C. de Freitas (MPI‐KOFO) is thanked for assistance with Raman spectroscopy. J. M. Salas (ITQ) is gratefully acknowledged for his contribution to CO‐FTIR experiments. J. J. Barnes and Shell (Amsterdam) are acknowledged for kindly providing an industrial olefin mixture as feed. Authors are thankful to F. Schüth for the provision of lab space and continued support. Part of the HRSTEM and EDX‐STEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016‐79776‐P (AEI/FEDER, UE) and from the European Union H2020 programs “ESTEEM3” (823717). The authors acknowledge support by the state of Baden‐Württemberg through bwHPC (bwUnicluster and JUSTUS, RV bw17D01), by the GRK 2450 and by the Helmholtz Association. This research received funding from the Max Planck Society, and the Fonds der Chemische Industrie of Germany. Funding from the Spanish Ministry of Science, Innovation and Universities (Severo Ochoa program SEV‐2016‐0683 and grant RTI2018‐096399‐A‐I00) is also acknowledged. B.B.S. acknowledges the Alexander von Humboldt Foundation for a postdoctoral scholarship. Open Access funding is provided by the Max Planck Society., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Covalently functionalized MoS2 with dithiolenes

  • Sideri, Ioanna K.
  • Arenal, Raúl
  • Tagmatarchis, Nikos
Advances are required to develop functionalization routes for MoS2, in both the metallic 1T and semiconducting 2H phase, that will not only enable their easier manipulation and handling in liquid media but also enhance their applicability in diverse technological fields. Herein, we report an original functionalization methodology for covalently incorporating dithiolene units at the periphery of exfoliated 1T- and 2H-MoS2 sheets, by employing a bis(thiolate) salt as a ligand in a green and facile protocol. Extensive characterization of the covalently functionalized materials is presented, along with a pathway for the à la carte chemical manipulation of MoS2. Markedly, the reported methodology may be applied for modifying other transition metal dichalcogenides., Partial support of this work by the project “Advanced Materials and Devices” (MIS 5002409), which is implemented under the “Action for the Strategic Development on the Research and Technological Sector” funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014-2020) and co-financed by Greece and the European Union (European Regional Development Fund) is acknowledged. R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E13_17R) and from EU H2020 program “ESTEEM3” (823717) and “Graphene Flagship“ (785219 and 881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

In-situ graphene oxide thermal analyses via TEM/EELS: water desorption, reduction and graphitisation

  • Peláez-Fernández, Mario
  • Bermejo-Solís, Alba
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
1 figure.-- Talk delivered at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., For the last fifteen years, graphene oxide (GO) has become a material of great importance within the subject of chemically modified graphene (CDG) for its vast potential applications. However, both the chemical structure of Graphene oxide and the diverse processes taking place in thermal reduction of GO into reduced graphene oxide (RGO) are still not completely clear despite the sizable amount of studies concerning this issue. TEM and EELS, using a sample holder capable of heating samples up to 1200ºC within the TEM, is a unique and extensive technique for the analysis of the reduction of GO. Using this technique, we can measure, simultaneously and in situ, four main properties essential to this analysis at several intermediate temperatures and under high vacuum: the oxidation rate, its thickness, its mass density and its sp2-sp3 bond ratio. This study presents an analysis of GO by studying all of the aforementioned properties in two different studies: a first one heating up to 300ºC to better understand the physisorbed and chemisorbed water desorption, and a second one up to 1200ºC focused on the desorption of various oxygen functional groups; as well as the graphitisation of GO. Our results will be compared with previous studies on the matter., This work was supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), and European Union H2020 programs Marie Sklodowska-Curie Enabling Excellence (642742), ESTEEM3 (823717), Flag-ERA GATES (JTC - PCI2018-093137) and Graphene Flagship (785219).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Transmission electron microscopy investigation of graphene oxide flakes

  • Hettler, Simon
  • Valenzuela, David S.
  • Peláez-Fernández, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
1 figure.-- Poster presented at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., A significant amount of research has been done on (reduced) graphene oxide ((r)GO) due to its controllable properties and because it is widely used as a starting point for graphene production and functionalization [1]. Although the chemical model of GO is very complex [2], it is well established that its properties are mainly controlled by the different functional groups present, the percentage of incorporated oxygen and the ratio between sp2 and sp3-hybridized C bonds [3]. Here we present our experimental results on transmission electron microscopy (TEM) investigation of GO acquired with an image-corrected FEI Titan3 operated at 80 kV. Using TEM imaging, electron diffraction and electron energy-loss spectroscopy (EELS), GO can be characterized in detail and properties such as composition, size, thickness or fraction of sp2-hybridized C bonds can be determined with high spatial resolution. Three EEL spectra showing the background-corrected C-K edge of different GO flakes are depicted in Figure 1. The C-K edge exhibits a sharp pre-peak at 285 eV, whose intensity corresponds to the fraction of sp2-hybridized C bonds, followed by a set of peaks associated to different oxidized functional groups and a broad peak starting at 290 eV. While the black line shows a spectra of a highly oxidized flake (17 %), the red and green curve were obtained from flakes with a low oxygen content. In summary, TEM-EELS is highly suited for an in-depth analysis of GO. The obtained information on structure, composition and alien material present in the GO allows to better understand the macroscopic properties of GO and its use in applications [4]., Research supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), Government of Aragon through project DGA E13_17R (FEDER, EU) and European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC - PCI2018-093137) and Graphene Flagship (785219)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Detailed thermal reduction analyses of graphene oxide via in-situ TEM/EELS studies

  • Peláez-Fernández, Mario
  • Bermejo-Solís, Alba
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
7 figures.-- Supplementary material available.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, We report an in-depth study of the reduction of graphene oxide (GO) by in-situ thermal transmission electron microscopy (TEM) analysis. In-situ heating high-resolution TEM (HRTEM) imaging and electron energy-loss spectroscopy (EELS) measurements have been combined to identify the transformations of different oxygen functional groups, the desorption of physisorbed and chemisorbed water and the graphitisation as a function of the temperature in the range from 70 up to 1200 °C. A model for the general removal of water and OFGs is proposed based on different chemical and physical parameters that have been monitored. All this unique information provides a detailed roadmap of the thermal behaviour of GO at an extended range of temperature. This is not only of interest to understand the thermal reduction process of GO but also of critical relevance to the response of GO in applications when exposed to thermal effects., Research supported by the Spanish MINECO and MICINN (MAT2016-79776-P, AEI/FEDER, EU; PID2019-104739GB-100/AEI/10.13039/501100011033; and PID2019-104272RB-C51/AEI/10.13039/501100011033), Gobierno de Aragon (DGA Grupos Reconocidos E13_17R (FEDER, EU) and T03_20R) and European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC-PCI2018-093137), EU H2020 Enabling Excellence (MSCA-ITN) and Graphene Flagship (881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ reduction by Joule heating and measurement of electrical conductivity of graphene oxide in a transmission electron microscope

  • Hettler, Simon
  • Sebastián del Río, David
  • Peláez-Fernández, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
4 figures.-- Supporting information available on the website of the publisher., Graphene oxide (GO) is reduced by Joule heating using in-situ transmission electron microscopy (TEM). The approach allows the simultaneous study of GO conductivity by electrical measurements and of its composition and structural properties throughout the reduction process by TEM, electron diffraction and electron energy-loss spectroscopy. The small changes of GO properties observed at low applied electric currents are attributed to the promotion of diffusion processes. The actual reduction process starts from an applied power density of about 2 × 1014 Wm−3 and occurs in a highly uniform and localized manner. The conductivity increases more than 4 orders of magnitude reaching a value of 3 × 103 Sm−1 with a final O content of less than 1%. We discuss differences between the reduction by thermal annealing and Joule heating., S.H. and R.A. acknowledge funding by German Research Foundation (DFG project He 7675/1-1). Research supported by the Spanish MINECO and MICINN (MAT2016-79776-P,AEI/FEDER, EU; PID2019-104739GB-100/AEI/10.13039/501100011033; ENE2016-79282-C5-1-R, AEI/FEDER, EU and PID2019-104272RB-C51/AEI/10.13039/501100011033), Government of Aragon (projects DGA E13-17R (FEDER, EU); DGA T03-17R (FEDER, EU) and DGA T03-20R) and European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC - PCI2018-093137), ITN Enabling Excellence (MSCA-ITN) and Graphene Flagship (881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

In-situ graphene oxide thermal behaviour via TEM/EELS: water desorption, reduction and graphitisation

  • Peláez-Fernández, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
1 figure.-- Abstract of the poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., Through the last decade, graphene oxide (GO) has become a material of growing importance within the realm of Chemically modified graphene (CDG) [1] for its many potential applications[2]. However, both the chemical structure of Graphene oxide and the diverse processes taking place in thermal reduction into reduced graphene oxide (RGO) are still not completely clear despite the amount of studies concerning this issue [2]. Electron energy loss spectroscopy, coupled with a sample holder capable of heating samples up to 1200°C, is a unique and extensive technique for the analysis of the reduction of GO. Using this technique, we can measure simultaneously four main properties essential to this analysis at any given temperature and under ultra high vacuum: the oxidation rate [3], its thickness [4], its mass density [5] and its sp2-sp3 bond ratio [6]. This study presents an analysis of GO and all the aforementioned properties in two different studies: one up to 300°C to better understand the physisorbed and chemisorbed water desorption, and a second one up to 1200°C focused on the reduction of GO by desorption of various oxygen functional groups; as well as the graphitisation of GO. Our results will be compared with previous studies on the matter., This work was supported by the EU MSCA project 642742, Research supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), Government of Aragon through project DGA E13_17R (FEDER, EU) and European Union H2020 programs "ESTEEM3" (823717) and Graphene Flagship (785219), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A detailed investigation of the onion structure of exchanged coupled magnetic Fe3-δO4@CoFe2O4@Fe3-δO4 nanoparticles

  • Sartori, Kevin
  • Musat, Anamaria
  • Choueikani, Fadi
  • Grenèche, Jean Marc
  • Hettler, Simon
  • Bencok, Peter
  • Begin-Colin, Sylvie
  • Steadman, Paul
  • Arenal, Raúl
  • Pichon, Benoit P.
Nanoparticles that combine several magnetic phases offer wide perspectives for cutting edge applications because of the high modularity of their magnetic properties. Besides the addition of the magnetic characteristics intrinsic to each phase, the interface that results from core–shell and, further, from onion structures leads to synergistic properties such as magnetic exchange coupling. Such a phenomenon is of high interest to overcome the superparamagnetic limit of iron oxide nanoparticles which hampers potential applications such as data storage or sensors. In this manuscript, we report on the design of nanoparticles with an onion-like structure which has been scarcely reported yet. These nanoparticles consist of a Fe3−δO4 core covered by a first shell of CoFe2O4 and a second shell of Fe3−δO4, e.g., a Fe3−δO4@CoFe2O4@Fe3−δO4 onion-like structure. They were synthesized through a multistep seed-mediated growth approach which consists consists in performing three successive thermal decomposition of metal complexes in a high-boiling-point solvent (about 300 °C). Although TEM micrographs clearly show the growth of each shell from the iron oxide core, core sizes and shell thicknesses markedly differ from what is suggested by the size increasing. We investigated very precisely the structure of nanoparticles in performing high resolution (scanning) TEM imaging and geometrical phase analysis (GPA). The chemical composition and spatial distribution of atoms were studied by electron energy loss spectroscopy (EELS) mapping and spectroscopy. The chemical environment and oxidation state of cations were investigated by 57Fe Mössbauer spectrometry, soft X-ray absorption spectroscopy (XAS) and X-ray magnetic circular dichroism (XMCD). The combination of these techniques allowed us to estimate the increase of Fe2+ content in the iron oxide core of the core@shell structure and the increase of the cobalt ferrite shell thickness in the core@shell@shell one, whereas the iron oxide shell appears to be much thinner than expected. Thus, the modification of the chemical composition as well as the size of the Fe3−δO4 core and the thickness of the cobalt ferrite shell have a high impact on the magnetic properties. Furthermore, the growth of the iron oxide shell also markedly modifies the magnetic properties of the core–shell nanoparticles, thus demonstrating the high potential of onion-like nanoparticles to accurately tune the magnetic properties of nanoparticles according to the desired applications., K.S. was supported by a PhD grant from the French Agence Nationale de la Recherche (ANR) under the reference ANR11-LABX-0058-NIE within the Investissement d’Avenir program ANR-10-IDEX-0002-02 and SOLEIL synchrotron/Laboratoire Léon Brillouin fellowship. The authors are grateful to SOLEIL synchrotron light source for providing the access to DEIMOS beamline and to DIAMOND synchrotron light source for providing access to BLADE beamline. HRSTEM and STEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. S.H. is grateful to DFG (HE 7675/1-1). R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) and the MICINN through project grants MAT2016-79776-P (AEI/FEDER, UE) and PID2019-104739GB-100/AEI/10.13039/501100011033 as well as from the European Union H2020 program “ESTEEM3” (823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High performance LATP thin film electrolytes for all-solid-state microbattery applications

  • Siller, Valerie
  • Morata, Alex
  • Nuñez Eroles, Marc
  • Arenal, Raúl
  • Gonzalez-Rosillo, Juan Carlos
  • López del Amo, Juan Miguel
  • Tarancón, Albert
This article is part of the themed collection: Recent Open Access Articles., The NASICON superionic solid electrolyte Li1+xAlxTi2−x(PO4)3 (LATP) with 0.3 ≤ x ≤ 0.5 remains one of the most promising solid electrolytes thanks to its good ionic conductivity and outstanding stability in ambient air. Despite the intensive research for bulk systems, there are only very few studies of LATP in a thin film form (thickness < 1 μm) and its implementation in all-solid-state batteries and microbatteries. The following study fills this gap by exploring the properties of high performance LATP thin films fabricated by large-area Pulsed Laser Deposition (PLD). The as-deposited thin films exhibit an ionic conductivity of around 0.5 μS cm−1 at room temperature (comparable to the state-of-the-art of LiPON) which increases to a remarkably high value of 0.1 mS cm−1 after an additional annealing at 800 °C. A possible cause for this significant enhancement in ionic conductivity by two orders of magnitude is the formation of a glassy, intergranular phase. The performance of both as-deposited and annealed LATP films makes them suitable as solid electrolytes, which opens the path to a new family of stable and high performance all-solid-state thin film batteries., This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 824072 (HARVESTORE), from the European Regional Development Fund under the FEDER Catalonia Operative Programme 2014-2020 (FEM-IoT, 001-P-00166) and the “Generalitat de Catalunya” (2017 SGR 1421, NANOEN). FIB, HRSTEM, EDS and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R. A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) and the MICINN through project grants MAT2016-79776-P (AEI/FEDER, UE) and PID2019-104739GB-I00 as well as from the European Union H2020 program “ESTEEM3” (823717). J. C. G.-R., acknowledges the financial support provided by the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 801342 (Tecniospring INDUSTRY), as well as by the Agency for Business Competitiveness of the Government of Catalonia. NMR measurements were supported and carried out at the Centre for Cooperative Research on Alternative Energies (CIC energiGUNE) as a member of the Basque Research and Technology Alliance (BRTA). Suitable Si3N4 substrates and microelectrodes have been provided by the Institute of Microelectronics of Barcelona IMB-CNM. Pt-covered Si substrates have been fabricated by the Interuniversity Microelectronics Centre (imec) in Leuven, Belgium. GI-XRD measurements have been collected at the Scientific and Technological Center (CCiT) at the University of Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Shelling with MoS2: Functional CuS@MoS2 hybrids as electrocatalysts for the oxygen reduction and hydrogen evolution reactions

  • Bar-Hen, Avraham
  • Bar-Ziv, Ronen
  • Ohaion-Raz, Tsion
  • Mizrahi, Amir
  • Hettler, Simon
  • Arenal, Raúl
  • Bar-Sadan, Maya
The development of noble-metal free electrocatalysts is of high importance for clean energy conversion applications. MoS2 has been considered as a promising low-cost catalyst for the hydrogen evolution reaction (HER), however its activity is limited by poor conductivity and low abundance of active sites. Moreover, its suitability as an effective catalyst for other reactions, in particular the oxygen reduction reaction (ORR), was hardly explored to date. Herein, we show hybrid nanostructures of shelled CuS particles with MoS2 layers, which produces several outcomes: The MoS2 shell is strained and defective, and charge transfer from the core to MoS2 occurs, enabling activation of the basal plane of MoS2. Changing the feed ratio of the precursors led to control over morphology, such that the wrapping of the cores with the shell was continuously varied and characterized. We found an optimal hybrid structure, which provided high electrochemical active surface area and fast charge transfer kinetics, leading to improved activity not only towards HER (overpotential of 225 mV at 10 mA cm−2), but also for the sluggish ORR (onset potential 0.87 V vs RHE)., This research was supported by the United States – Israel Binational Science Foundation (BSF), Jerusalem, Israel and the United States National Science Foundation (NSF) grant 2017642, and partly from the Israeli Atomic Energy Commission–Prof. A. Pazy joint foundation. The HRSTEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. S.H. acknowledges funding by German Research Foundation (HE 7675/1-1). R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) and the MICINN through project grants MAT2016-79776-P (AEI/FEDER, UE) and PID2019-104739GB-I00/AEI/10.13039/501100011033, as well as from the European Union H2020 programs “Graphene Flagship” (881603) and “ESTEEM3” (823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ruthenium icosahedra and ultrathin platelets: The role of surface chemistry on the nanoparticle structure

  • Ramamoorthy, Raj Kumar
  • Soulantica, Katerina
  • Rosal, Iker del
  • Arenal, Raúl
  • Decorse, Philippe
  • Piquemal, Jean-Yves
  • Chaudret, Bruno
  • Poteau, Romuald
  • Viau, Guillaume
The control of the crystalline structure and shape (crystal habit) of nanoparticles (NPs) is the key to controlling their physical and chemical properties. Among the different metals, the crystallogenesis of ruthenium NPs has been less studied, and until recently, the Ru NP crystal structure and morphology have been considered as presenting less versatility than the face-centered cubic (fcc) metals of the platinum group. Here, we show that while the hydrogenation of [Ru(COD)(COT)] in solutions containing a long-chain amine (hexadecylamine, HDA) in large excess leads to isotropic NPs adopting the expected hexagonal close-packed (hcp) structure of bulk Ru, a long-chain carboxylic acid (lauric acid, LA) in large excess induces the formation of Ru nano-objects of two original structures: ultrathin platelets and icosahedra. The latter have never been produced so systematically by other methods. We show that carbon monoxide, produced in situ by the decarbonylation of lauric acid, plays a pivotal role in the stabilization of the Ru icosahedra. This result is supported by density functional theory (DFT) calculations, which show that above a critical surface coverage of CO, small Ru icosahedra are more stable than the Ru bipyramid polyhedra crystallizing in the hcp structure. Thus, in situ production of CO results in a competition between icosahedral and hcp seeds, which explains the mixture of icosahedra and ultrathin platelets. Another effect of the large excess of lauric acid is the stabilization of the ruthenium precursors in solution, limiting the nucleation extent and slowing down the NP growth. While the growth of the icosahedral seeds is limited because of the structural strains, the growth of the hcp seeds preferentially develops the (0001) facets, leading to ultrathin platelets and threefold stars., This work was funded by the French National Research Agency, ANR, in the framework of the TANOPOL project (ANR-15-CE07-0011-01). Teresa Hungria (Plateforme Castaing, Toulouse) is warmly thanked for HAADF-STEM images. The authors gratefully acknowledge the International Associated Laboratory (LIA)-M2OZART for financial support. High-resolution HAADF-STEM images were performed at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project MAT2016-79776-P (AEF/FEDER. UE). I.D.R. and R.P. thank the HPC CALcul en Midi-Pyrénées (CALMIP, OLYMPE machine, grant P0611) for a very generous allocation of computer time on this project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A building blocks strategy for preparing photocatalytically active anatase TiO2/rutile SnO2 heterostructures by hydrothermal annealing

  • Romito de Mendonça, Vagner
  • Avansi Jr., Waldir
  • Arenal, Raúl
  • Ribeiro, Caue
Effective heterostructures for photocatalysis need to present good electron-hole mobility among phases, a feature that is only attained with satisfactory interface quality. For very small sizes and with a stable colloidal state, the oriented attachment mechanism can be used to prepare suitable structures by means of a building blocks strategy, whereby preformed nanoparticles are used to control the desired amount of each phase in the heterostructure. Here, we show the success of this strategy for anatase TiO2/rutile SnO2 heterostructures, applying conventional hydrothermal annealing, where successive collisions among particles increase the probability of oriented attachment. The photodegradation of Rhodamine B in water under UV radiation was used as a probe reaction to evaluate formation of the heterostructure, as indicated by an increase in photoactivity. Increased heterostructure photoactivity was related to heterojunction formation and charge separation. The increased lifetimes of the photogenerated charges, due to heterojunction formation, enabled them to reach the oxides surface and promote photocatalytic reactions. The insights presented here may be used in a rationalized synthesis method to obtain heterostructures from preformed nanocrystals., The authors gratefully acknowledge the financial support provided by the Brazilian research funding agencies FAPESP and CNPq. The HRTEM analyses were conducted in the Laboratorio de Microscopias Avanzadas at the Instituto de Nanociencia de Aragon, Universidad de Zaragoza (Spain). Some of the research leading to these results received funding from the European Union Seventh Framework Program, under grant agreement 312483 ESTEEM2 (Integrated Infrastructure Initiative – I3). R.A. gratefully acknowledges support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) and from the Government of Aragon and the European Social Fund, under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A novelty for cultural heritage material analysis: Transmission Electron Microscope (TEM) 3D electron diffraction tomography applied to Roman glass tesserae

  • Zacharias, Nikolaos
  • Karavassili, Fotini
  • Das, Partha Pratim
  • Nicolopoulos, Stavros
  • Oikonomou, Artemios
  • Galanis, Athanassios
  • Rauch, Edgar
  • Arenal, Raúl
  • Portillo, Joaquimu
  • Roqué, Josep
  • Casablanca, J.
  • Margiolaki, Irène
We present a novel electron diffraction technique (Automated precession 3D diffraction tomography - ADT) based on a Transmission Electron Microscope (TEM) to precisely determine unit cell parameters, Space Group symmetry and atomic structure of various pigment/opacifier crystallites of submicron dimensions and commonly present in colored Roman glass tesserae. Such technique can operate at nanometer scale and it is possible to distinguish even between mineralogical phases of similar/same chemical composition, but different crystal structures., NZ acknowledges financial support from the CULTTECH MSc Program of the University of the Peloponnese (KA-ELKE293) and RA from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P). Authors acknowledge assistance with TEM measurements by Dr. M. Kollia at the Interdepartmental Laboratory of Electron Microscopy and Microanalysis of Patras University. The authors are very grateful to the Director of the Society for the Messenian Archaeological Studies, Prof. P. Themelis, for permitting the scientific study of this material and acknowledge permits granted by the Greek Ministry of Culture and Sports., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Breaking the Nd3+-sensitized upconversion nanoparticles myth about the need of onion-layered structures

  • Estebanez, Nestor
  • Ferrera-González, Juan
  • Francés-Soriano, Laura
  • Arenal, Raúl
  • González-Béjar, María
  • Pérez-Prieto, Julia
Up to now, most strategies to build efficient 800 nm-light responsive upconversion nanoparticles (UCNPs) have included onion-layered structures, in which Nd3+ is confined within the inorganic crystal structure of at least one layer. We report here an easy room-temperature modular preparation of core-shell UCNPs consisting of NaYF4:Yb,Er(Tm)/NaYF4 (UCCS) with Nd3+ anchored at the organic capping by using cucurbituril[7] (CB[7]) as an adhesive. Strikingly, excitation at 800 nm effectively triggers the upconversion emission of UCCS@CB[7]@Nd nanohybrids., We thank MINECO (CTQ2017-82711-P), partially co-financed with FEDER funds; MAT2016-79776-P, Maria de Maeztu: MDM-2015-0538; RTC-2016-5114-5, FPU (LSF, JFG), contract (NEB); RyC (MGB) and Fundación Ramón Areces for financing this research. RA also acknowledges Government of Aragon and ESF under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26). TEM measurements were performed in SCSIE (University of Valencia) or Laboratorio de Microscopias Avanzadas (Instituto de Nanociencia de Aragon-University of Zaragoza). Hamamatsu is also acknowledged for kindly providing a Quantaurus-QY Plus UV-NIR absolute quantum yield spectrometer (C13534-11)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Coaxial nanowires as plasmon-mediated remote nanosensors

  • Funes-Hernando, Daniel
  • Peláez-Fernández, Mario
  • Winterauer, D.
  • Mevellec, Jean Yves
  • Arenal, Raúl
  • Batten, T.
  • Humbert, Bernard
  • Duvail, Jean-Luc
This study reports on the plasmon-mediated remote Raman sensing promoted by specially designed coaxial nanowires. This unusual geometry for Raman study is based on the separation, by several micrometres, of the excitation laser spot, on one tip of the nanowire, and the Raman detection at the other tip. The very weak efficiency of Raman emission makes it challenging in a remote configuration. For the proof-of-concept, we designed coaxial nanowires consisting of a gold core to propagate surface plasmon polaritons and a Raman-emitting shell of poly(3,4-ethylene-dioxythiophene). The success of the fabrication was demonstrated by correlating, for the same single nanowire, a morphological analysis by electron microscopy and Raman spectroscopy analysis. Importantly for probing the remote-Raman effect, the original hard template-based process allows one to control the location of the polymer shell all along the nanowire, or only close to one or the two nanowire tips. Such all-in-one single nanowires could have applications in the remote detection of photo-degradable substances and for exploring 1D nanosources for integrated photonic and plasmonic systems., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. The STEM-EELS studies have been conducted in the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA)-Universidad de Zaragoza (Spain), Spanish ICTS National facility. R. A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design and development of multi-walled carbon nanotube-liposome drug delivery platforms

  • Pippa, Natassa
  • Fernández-Pacheco, Rodrigo
  • Arenal, Raúl
  • Tagmatarchis, Nikos
The aim of this study is to design and develop delivery platforms made of liposomes and multi-walled carbon nanotubes (MWCNTs). We used different lipids with different main transition temperature (Tm) and differently functionalized MWCNTs with organic addends possessing either positive or negative charge. The phospholipids used for the formulations were 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) (Tm = 41 °C) and L-α-phosphatidylcholine, hydrogenated Soy (HSPC) (Tm = 53 °C). By Differential Scanning Calorimetry (DSC), we studied the interaction between the DPPC and HSPC bilayers and MWCNTs. Liposome-MWCNTs delivery platforms prepared according to the protocol used in the literature. We used dynamic and electrophoretic light scattering in order to investigate the physicochemical characteristics of these mixed nanocarriers. The presence of MWCNTs causes alterations of the size of the conventional HSPC and DPPC liposomes. The ζ-potential values of mixed nanocarriers are near zero. This observation indicates the effective incorporation of MWCNTs into the lipid bilayer of liposomes. Fluorescence spectroscopy has been utilized to exact some qualitative information on the internal nanostructure and nanoenvironment of the lipid/carbon nanotube mixed structures. Finally, we conclude that we successfully prepare and completely characterize mixed nanocarriers composed of lipids and MWCNTs, with low toxicity as indicated by in vitro screening., The cryo-TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. The Government of Aragon, and the European Social Fund are gratefully acknowledged. R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26). R.A. and R.F.-P. gratefully acknowledge the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE).Partial funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant agreement No 642742 is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Extraordinary sensitizing effect of co-doped carbon nanodots derived from mate herb: Application to enhanced photocatalytic degradation of chlorinated wastewater compounds under visible light

  • Ortega-Liébana, M. Carmen
  • Hueso, José L.
  • Ferdousi, Shammi
  • Arenal, Raúl
  • Irusta, Silvia
  • Yeung, King Lun
  • Santamaría, Jesús
The present work investigates the role of two types of carbon nanodots (CNDs) as novel sensitizers of TiO2 to create a visible-light driven photo-catalyst that is not only efficient for solar-driven pollution abatement, but also inexpensive, durable and environmentally-friendly. Two widely available green organic precursors, the Argentinean herb Mate and the Stevia plant have been selected as the carbogenic source to thermally induce the formation of different types of CNDs with different levels of N and P doping and tunable photoluminescence response in the UV–vis-near infrared (NIR) ranges. These CNDs have been successfully assembled with TiO2 to form heterogeneous photocatalysts that are highly active in the visible-light and NIR- driven photodegradation of 2,4-dichlorophenol (2,4-DCP), a persistent chlorinated organic compound present in numerous pesticide formulations., The authors acknowledge the European Research Council for funding through an advanced Grant research Project (HECTOR Grant number 267626) and a CIG-Marie Curie Reintegration Grant (NANOLIGHT REA Grant number 294094). The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN). The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement 312483- ESTEEM2 (Integrated Infrastructure Initiative – I3). R.A. also gratefully acknowledges support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) and from the Government of Aragon and the European Social Fund, under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26)”. Catedra Samca and Government of Aragon are also acknowledged for financial support within the collaboration program established between the University of Zaragoza and the Hong Kong University of Science and Technology. Finally, M.C.O thanks the Spanish Ministerio de Economia y Competitividad for an FPU PhD research fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Functionalization of MoS2 with 1,2-dithiolanes: toward donor-acceptor nanohybrids for energy conversion

  • Canton-Vitoria, Rubén
  • Sayed-Ahmad-Baraza, Yuman
  • Peláez-Fernández, Mario
  • Arenal, Raúl
  • Bittencourt, Carla
  • Ewels, Christopher P.
  • Tagmatarchis, Nikos
The covalent functionalization of exfoliated semiconducting MoS2 by 1,2-dithiolanes bearing an ethylene glycol alkyl chain terminated to a butoxycarbonyl-protected amine and a photoactive pyrene moiety is accomplished. The MoS2-based nanohybrids were fully characterized by complementary spectroscopic, thermal, and microscopy techniques. Markedly, density functional theoretical studies combined with X-ray photoelectron spectroscopy analysis demonstrate preferential edge functionalization, primarily via sulfur addition along partially sulfur saturated zig-zag MoS2 molybdenum-edges, preserving intact the 2D basal structure of functionalized MoS2-based nanohybrids as confirmed by high-resolution transmission electron microscopy and electron energy loss spectroscopy. Furthermore, in the MoS2-pyrene hybrid, appreciable electronic interactions at the excited state between the photoactive pyrene and the semiconducting MoS2 were revealed as inferred by steady-state and time-resolved photoluminescence spectroscopy, implying its high potentiality to function in energy conversion schemes., This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant agreement No 642742. C.B. is a research associate of FRS-FNRS. TEM studies were conducted at the Laboratorio de Microscopías Avanzadas, Instituto de Nanociencia de Aragón, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union FP7 under Grant agreements 312483- ESTEEM2 (Integrated Infrastructure Initiative—I3). The Government of Aragon, and the European Social Fund are gratefully acknowledged. R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26) and the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grants FIS2013-46159-C3-3-P and MAT2016-79776-P (AEI/FEDER, UE), as well as from the European Union H2020 program “Graphene Flagship”, Grant Agreement 696656., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid noble-metals/metal-oxide bifunctional nano-heterostructure displaying outperforming gas-sensing and photochromic performances

  • Tobaldi, David Maria
  • Leonardi, Salvatore Gianluca
  • Movlaee, Kaveh
  • Lajaunie, Luc
  • Seabra, Maria P.
  • Arenal, Raúl
  • Neri, Giovanni
  • Labrincha, J. A.
As nanomaterials are dominating 21st century’s scene, multiple functionality in a single (nano)structure is becoming very appealing. Inspired by the Land of the Rising Sun, we designed a bifunctional (gas-sensor/photochromic) nanomaterial, made with TiO2 whose surface was simultaneously decorated with copper and silver (the Cu/Ag molar ratio being 3:1). This nanomaterial outperformed previous state-of-the-art TiO2-based sensors for the detection of acetone, as well as the Cu–TiO2-based photochromic material. It indeed possessed splendid sensitivity toward acetone (detection limit of 100 ppb, 5 times lower than previous state-of-the-art TiO2-based acetone sensors), as well as reduced response/recovery times at very low working temperature, 150 °C, for acetone sensing. Still, the same material showed itself to be able to (reversibly) change in color when stimulated by both UV-A and, most remarkably, visible light. Indeed, the visible-light photochromic performance was almost 3 times faster compared to the standard Cu–TiO2 photochromic material—that is, 4.0 min versus 10.8 min, respectively. It was eventually proposed that the photochromic behavior was triggered by different mechanisms, depending on the light source used., This work was developed within the scope of the project CICECO–Aveiro Institute of Materials, POCI-01-0145-FEDER-007679 (FCT Ref. UID/CTM/50011/2013), financed by national funds through the FCT/MEC and when appropriate co-financed by FEDER under the PT2020 Partnership Agreement. The STEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA)—Universidad de Zaragoza (Spain). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon, and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of the absolute rutile fraction on TiO2 visible-light absorption and visible-light-promoted photocatalytic activity

  • Tobaldi, David Maria
  • Lajaunie, Luc
  • Rozman, Nejc
  • Caetano, Ana P.F.
  • Seabra, Maria P.
  • Sever Škapin, A.
  • Arenal, Raúl
  • Labrincha, J. A.
Titanium dioxide is by far the most used semiconductor material for photocatalytic applications. Still, it is transparent to visible-light. Recently, it has been proved that a type-II band alignment for the rutile − anatase mixture would improve visible-light absorption. In this research paper we thoroughly characterised the real crystalline and amorphous phases of synthesised titanias – thermally treated at different temperatures to get distinct ratios of anatase-rutile-amorphous fraction – as well as that of three commercially available photocatalytic nano-TiO2., Optical spectroscopy showed that even a small fraction of rutile (2 wt%) is able to shift to lower energies the apparent optical band gap of an anatase-rutile mixed phase. But is this enough to attain a real photocatalytic activity promoted by merely visible-light? We tried to give an answer to that question., Photocatalytic activity was assessed in the liquid- and gas-solid phase (employing rhodamine B and 4-chlorophenol, and isopropanol, respectively, as the organic substances to degrade) using a light source irradiating exclusively in the visible-range., Photocatalytic activity results in the liquid-solid phase showed that a high surface hydroxylation led to specimen with superior visible light-promoted catalytic activity – i.e. dye and ligand-to-metal charge transfer complexes sensitisation effects, not photocatalysis sensu-strictu., On the other hand, the gas-solid phase results showed that a higher amount of the absolute rutile fraction (around 10 wt%), together with less recombination of the charge carriers, were more effective for both visible-light absorption and a “real” visible-light promoted photocatalytic oxidation of isopropanol., This work was developed within the scope of the project CICECO-Aveiro Institute of Materials, FCT Ref. UID/CTM/50011/2019, financed by national funds through the FCT/MCTES. David Maria Tobaldi is grateful to Portuguese national funds (OE), through FCT, I.P., in the scope of the framework contract foreseen in the numbers 4, 5 and 6 of the article 23, of the Decree-Law 57/2016, of August 29, changed by Law 57/2017, of July 19. We are obliged to Prof J Tedim and Prof LD Carlos (DEMaC/CICECO–Aveiro Institute of Materials and Physics Department and CICECO–Aveiro Institute of Materials, University of Aveiro, Portugal) for their constructive and fruitful discussions that improved the manuscript noticeably. The STEM and EELS measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA) – Universidad de Zaragoza (Spain). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26). We also acknowledge financial support from the Slovenian Research Agency through the research programme No. P2-0273., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Insights into formation of anatase TiO2 nanoparticles from peroxo titanium complex degradation under microwave-assisted hydrothermal treatment

  • Mendonça, Vagner R. de
  • Lopes, Osmando F.
  • Avansi Jr., Waldir
  • Arenal, Raúl
  • Ribeiro, Caue
Several methods for the synthesis of anatase TiO2 have been reported in the literature. In particular, the microwave-assisted hydrothermal crystallization of Ti-peroxocomplexes has enabled the phase and morphological control of TiO2 nanoparticles by adjusting the synthesis conditions, such as pH, time and temperature, with significant increase in the reaction rate compared to the conventional sol-gel techniques. In this paper, we uncover the mechanism involved in the formation of anatase TiO2 nanoparticles from the Ti-peroxo complex precursor route. Structural characterizations (XRD, Raman, TEM and XANES) revealed that the Ti-peroxo complex precursor exhibits a titanate-like structure, comprised of bulk NH4+ ions and surface peroxo groups. The NH4+ ions release during hydrothermal treatment is determining on the anatase TiO2 nanoparticle formation, which occurs concomitantly with the decomposition of peroxogroups. UV-induced dye photodegradation tests involving the Ti-peroxo complex precursor and TiO2 nanoparticles showed that the precursor is not able to form hydroxyl radicals that are the main chemical species responsible for the dye photodegradation, despite the presence of peroxo groups at its surface. The results herein highlight the mechanism involved in the formation of anatase TiO2 nanoparticles, which could assist in the development of new synthesis approaches based on Ti-peroxocomplex precursors., The authors are grateful to the Ministry of Science, Technology, and Innovation (through SisNANO Program – National System of Laboratories in Nanotechnology), the National Council for Scientific and Technological Development (CNPq, Brazil China Virtual Center in Nanotechnology Project and grants #402287/2013-4, # 468956/2014-0, #409904/2016-3, #407497/2018-8), Coordination for the Improvement of Higher Education Personnel (CAPES), Sao Paulo Research Foundation (FAPESP #18/01258-5, #15/14330-8, #16/09746-3), and Embrapa Rede AgroNano for their financial support. The authors also gratefully acknowledge the Laboratory for Multifunctional Materials/ETH-Zurich and the Head of Group Markus Niederberger for the laboratory facilities and Dr. Wei Cheng for the SEM measurements. The XANES spectra was measured at LNLS (project XAFS1-7797 and 9542), Campinas, SP, Brazil. The HRTEM measurements were performed at the Laboratorio de Microscopias Avanzadas (LMA) of the Instituto de Nanociencia de Aragon (INA) – Universidad de Zaragoza (Spain). W.A.Jr. also gratefully acknowledges the financial support provided by the Brazilian research funding agency CNPq (311463/2017-7). R.A. also gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26). C.R. also acknowledges Chinese Academy of Sciences (CAS) President's International Fellowship Initiative (PIFI) by financial support and CAPES/Alexander von Humboldt Foundation by Experienced Research Fellowship (CAPES Finance Code 001; CAPES Process 88881.145566/2017-1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ preparation of ultra-small Pt nanoparticles within rod-shaped mesoporous silica particles: 3-D tomography and catalytic oxidation of n-hexane

  • Usón, Laura
  • Hueso, José L.
  • Sebastián, Víctor
  • Arenal, Raúl
  • Florea, Ileana
  • Irusta, Silvia
  • Arruebo, Manuel
  • Santamaría, Jesús
The shape and porous configuration of supports are key parameters to design outstanding catalysts. However, the selection of a proper mesoporous support, such as SBA-15, by itself does not guarantee accessibility to catalytic sites. The distribution of the active phase and its stability are strongly related to the procedure used to deposit it on the catalytic substrate. Herein, we have prepared rod-shaped SBA-15 silica supports functionalized with amine groups to facilitate the electrostatic attraction and a good distribution of the resulting Pt-based catalytic nanoparticles along the pore walls. Additionally, the use of tetrakis-(hydroxymethyl)-phosphonium chloride (THPC) as both reductant and stabilizer is presented as a novel alternative for Pt nanoparticle synthesis. The behaviour of this catalyst in the total oxidation of n-hexane demonstrates high activity and excellent stability after 70 h on reaction stream. STEM-HAADF and 3-D tomography were used to confirm the presence of the metallic nanoparticles within the mesochannels and to corroborate their reduced sintering after reaction., Financial support from the MICINN through the MAT2011-24988 grant, the European Research Council (ERC-Advanced Grant-HECTOR, grant agreement 267626), People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642 and no. 294094) and the CIBER-BBN. These TEM measurements were supported by the European Union Seventh Framework Program under Grant Agreement 312483 - ESTEEM2 (Integrated Infrastructure Initiative – I3). IF acknowledges financial support by the Agence Nationale de la Recherche (ANR) under Contract 756 ANR-BLAN-SIMI10-LS-100617-15-01. The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) and from the Government of Aragon and the European Social Fund, under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interlayer interaction effects on the G Modes in double-walled carbon nanotubes with different electronic configurations

  • Levshov, Dmitry I.
  • Tran, Huy Nam
  • Michel, Thierry
  • Cao, Thi Thanh
  • Nguyen, Van Chuc
  • Arenal, Raúl
  • Popov, Valentin N.
  • Zahab, Ahmed Azmi
  • Paillet, Matthieu
We present experimental measurements of the features of G band in individual index-identified free-standing double-walled carbon nanotubes. We examine Raman spectra of different electronic configurations of DWNTs, namely: SC@SC, SC@M, M@SC, M@M, and clearly establish that, as in SWNTs, the profile of LO G-mode of each layer is broad (narrow) when the layer is metallic (semiconducting). The dependence of G-modes on the diameter and inter-layer distance in several SC@SC, SC@M, M@SC, M@M index-identified DWNTs is reported. We find, that, independently of the metallic or semiconducting nature of the layers, the frequencies of LO and TO G-mode of the inner and outer layers shift significantly with respect to the frequencies of the same modes in the constituent SWNTs., DL gratefully acknowledges financial support from RFBR Grant 15-12-08340. JLS, AAZ and MP acknowledge financial support by the ANR GAMBIT project, grant ANR-13-BS10-0014 of the French Agence Nationale de la Recherche, and the International project of Scientific Cooperation with Vietnam (CNRS PICS 6457). The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. The Government of Aragon, and the European Social Fund are gratefully acknowledged. R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26) and the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE). VCN acknowledge financial support by the Vietnam National Foundation for Science and Technology Development (No. 103.99–2016.19)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modification of anatase using noble-metals (Au, Pt, Ag): Toward a nanoheterojunction exhibiting simultaneously photocatalytic activity and plasmonic gas sensing

  • Karmaoui, Mohamed
  • Lajaunie, Luc
  • Tobaldi, David Maria
  • Leonardi, Salvatore Gianluca
  • Chahinez Benbayer
  • Arenal, Raúl
  • Labrincha, J. A.
  • Neri, Giovanni
A new and original method, based on a non-aqueous sol–gel process, has been successfully established to produce quasi-spherical monodispersed TiO2 nanoparticles (NPs) and also noble metals (NM) @TiO2 heterostructures (NM = Au, Pt, Ag, 2 wt%), in one-pot and at low temperature. This has been achieved by using titanium oxyacetylacetonate as new single source precursors. This system has been deeply investigated by advanced characterization techniques. By using NMR, we have demonstrated the relatively complex mechanism behind this apparently simple synthesis, mediated by the reaction of the solvent and generated species, with many separate organic and organometallic molecules identified as being involved in the mechanism. The morphology and structure of the NM@TiO2 heterostructures were investigated by advanced scanning transmission electron microscopy while the chemical state of the noble metal nanoparticles was check by X-ray photoelectron spectroscopy (XPS). Undoped and noble metal (Au, Pt, Ag) decorated quasi/spherical TiO2 nanoparticles worked also as sensing interfaces, leading to the development of a highly sensitive conductometric NO gas sensor under both dark and UV–vis light irradiation, in the first result of its kind. Furthermore, the photocatalytic activity (PCA) was also evaluated, in the gas–solid phase, by monitoring the degradation of NOx under solar-light irradiation. Au-modified TiO2 showed improved photocatalytic efficiencies, compared to unmodified TiO2., M. Karmaoui thanks Fundação para a Ciência e a Tecnologia (FCT) for Grant N°. SFRH/BPD/74477/2010. “This work was developed in the scope of the project CICECO-Aveiro Institute of Materials (Ref. FCT UID/CTM/50011/2013), financed by national funds through the FCT/MEC and when applicable co-financed by FEDER under the PT2020 Partnership Agreement”. Authors acknowledge the PEstC/CTM/LA0011/2013 programme. The XPS, STEM and EDS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R. Arenal gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multiband light emission and nanoscale chemical analyses of carbonized fumed silica

  • Vasin, A. V.
  • Lajaunie, Luc
  • Arenal, Raúl
  • Nazarov, A. N.
Vasin et al., Fumed silica with a specific area of 295 m2/g was carbonized by successive phenyltrimethoxysilane treatments followed by annealing in inert atmosphere up to 650 °C. Emission, excitation, kinetics, and photo-induced bleaching effects were investigated by steady state and time-resolved photoluminescence spectroscopies. The local chemistry was also studied by infrared transmission spectroscopy. Strong ultraviolet and visible photoluminescence was observed in the samples after the chemical treatments/modifications and thermal annealing. It has been shown that ultraviolet photoluminescence in chemically modified fumed silica is associated with phenyl groups, while near ultraviolet and visible emission in annealed samples originated from inorganic pyrolytic carbon precipitates dispersed in the silica host matrix. Two types of emission bands were identified as a function of the annealing temperature: one is in the near UV and the other is in the visible range. Based on the emission/excitation analysis of these two bands, as well as on correlations with the synthesis conditions, a structural-energy concept of light-emitting centers has been proposed. According to this model, the light-emitting centers are associated with carbon clusters that can be bonded or adsorbed on the silica surface. This has been validated by a detailed (S)TEM-electron energy-loss spectroscopy study, confirming the inhomogeneous distribution of nanoscale carbon precipitates at the surface of the silica nanoparticles. These carbon precipitates are mostly amorphous although they possess some degree of graphitization and local order. Finally, the fraction of sp2 carbon in these nanoclusters has been estimated to be close to 80%., The authors thank the Ministry of Education and Science of Ukraine for support (Project No. F2904) and the Ukrainian Science & Technology Center (Project No. 6362). The XPS and (S)TEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014–2020 (Grant No. E/26) and the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through Project Grant No. MAT2016-79776-P (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Noncovalent stable functionalization makes carbon nanotubes hydrophilic and biocompatible

  • Ernst, Friederike
  • Arenal, Raúl
  • Fernández-Pacheco, Rodrigo
F. Ernst et al., Semiconducting single-wall carbon nanotubes possess an intrinsic photoluminescence in the near-infrared region beyond 900 nm, the NIR-II window of biological imaging. Here, we introduce a modular molecule for noncovalent nanotube functionalization which renders carbon nanotubes hydrophilic and fully biocompatible through a one-step process. We demonstrate through electron energy-loss spectroscopy (EELS) spectroscopy that the noncovalent functionalization mechanism relies on tight and extremely robust π–π stacking, which survives an exchange of the solvent as well as drying. Furthermore, the modularity of the molecule design allows for the introduction of functional units into the molecule itself to modify the optical properties of the carbon nanotube, for instance to augment its excitation window through an excitation energy transfer, facilitating the excitation of most carbon nanotube chiralities at one single wavelength., We gratefully acknowledge the financial support of the European Research Council (grant number 210642) and the German Research Foundation (DFG via SFB 658, subprojects A6 and B7). ZG and LC thank J. Varuela and L. Groc for the use of the absorption reader for MTT assay and acknowledge financial support from CNRS, Agence Nationale de la Recherche (ANR-14-OHRI-0001-01), IdEx Bordeaux (ANR-10-IDEX-03-02), and the France-BioImaging national infrastructure (ANR-10-INBS-04-01). The microscopy works were conducted in the Laboratorio de Microscopias Avanzadas at the Instituto de Nanociencia de Aragon - Universidad de Zaragoza (Spain). R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant FIS2013-46159-C3-3-P and MAT2016-79776-P (AEI/FEDER, UE). The Government of Aragon and the European Social Fund are gratefully acknowledged. R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optoelectronic properties of calcium cobalt oxide misfit nanotubes

  • Lajaunie, Luc
  • Ramasubramaniam, Ashwin
  • Panchakarla, Leela S.
  • Arenal, Raúl
We report on the optoelectronic properties of a recently discovered nanotubular phase of misfit-layered calcium cobalt oxide, CaCoO2–CoO2. Individual nanotubes are investigated by spatially resolved electron energy-loss spectroscopy experiments performed in a transmission electron microscope, and complementary first-principles, time-dependent hybrid density-functional theory calculations are performed to elucidate the electronic structure and optical spectra. We find that the band gap is independent of the geometry of the nanotubes, and experimental and calculated results independently confirm an optical gap of 1.9–2.1 eV for the CaCoO2–CoO2 nanotubes. The time-dependent hybrid density-functional theory calculations also suggest the existence of strongly bound intralayer excitons (up to 0.5 eV binding energy), which could allow for optoelectronic applications of these nanotubes at near-infrared to visible (∼1.5–2 eV) wavelengths., R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through Project Grant No. MAT2016-79776-P (AEI/FEDER, UE) and from the EU H2020 Program “Graphene Flagship” (Grant Agreement Nos. 696656 and 785219)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photoluminescence from an individual double-walled carbon nanotube

  • Levshov, Dmitry I.
  • Parret, Romain
  • Tran, Huy Nam
  • Michel, Thierry
  • Cao, Thi Thanh
  • Nguyen, Van Chuc
  • Arenal, Raúl
  • Popov, Valentin N.
  • Rochal, Sergei B.
  • Sauvajol, Jean Louis
  • Zahab, Ahmed Azmi
  • Paillet, Matthieu
We report direct and unambiguous evidence of the existence of inner semiconducting tube (ISCT) photoluminescence (PL) from measurements performed on four individual freestanding index-identified double-walled carbon nanotubes (DWNTs). Based on thorough Rayleigh scattering, Raman scattering, and PL experiments, we are able to demonstrate that the ISCT PL is observed with a quantum yield estimated to be a few 10−6 independent of the semiconducting or metallic nature of the outer tube. This result is mainly attributed to ultrafast exciton transfer from the inner to outer tube. Furthermore, by carrying out PL excitation experiments on the (14,1)@(15,12) DWNT, we show that the ISCT PL can be detected through the optical excitation of the outer tube, indicating that the exciton transfer can also occur in the opposite way., D.I.L. and S.B.R. gratefully acknowledge financial support from the Russian Science Foundation (Grant No. 15-12-10004). R.P., J.-L.S., A.-A.Z., and M.P. acknowledge financial support from the ANR GAMBIT project, Grant No. ANR-13-BS10-0014 of the French Agence Nationale de la Recherche, and the International Project of Scientific Cooperation with Vietnam (CNRS PICS 6457). V.C.N. acknowledges financial support from the Vietnamese National Foundation for Science and Technology Development (Grant No.103.99-2016.19). R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014–2020 (Grant No. E/26) and the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through Project Grant No. MAT2016-79776-P (AEI/FEDER, UE). The research leading to these results has received funding from the EU H2020 programs ETN Grant Agreement No. 642742. The TEM studies were conducted at the Laboratorio de Microscopías Avanzadas, Instituto de Nanociencia de Aragón, Universidad de Zaragoza, Spain. The government of Aragon and the European Social Fund are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pingpong-Energietransfer in kovalent verknüpften Porphyrin-MoS2-Architekturen

  • Canton-Vitoria, Rubén
  • Scharl, Tobias
  • Stergiou, Anastasios
  • Cadranel, Alejandro
  • Arenal, Raúl
  • Guldi, Dirk M.
  • Tagmatarchis, Nikos
Molybdändisulfid-Nanoschichten wurden mit Porphyrin kovalent modifiziert und vollständig charakterisiert. Weder die Porphyrin-Absorption noch die Fluoreszenz wurden durch die kovalente Bindung an MoS2 merklich beeinflusst. Mithilfe transienter Absorptionsspektroskopie konnte jedoch ein komplexer Pingpong-Energietransfer-Mechanismus, nämlich vom Porphyrin zum MoS2 und wieder zurück zum Porphyrin, bestätigt werden. Diese Studie zeigt das Potential von Übergangsmetalldichalkogeniden bei Photosensibilisierungsprozessen auf., Dieses Projekt wurde im Rahmen des Marie-Sklodowska-Curie-Fördervertrags Nr. 642742 von der EC H2020 finanziert. HRSTEM- und EELS-Studien wurden am Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universität Saragossa, Spanien, durchgeführt. R.A. bedankt sich bei dem spanischen Ministerium für Wirtschaft und Wettbewerbsfähigkeit (MINECO) für die Unterstützung durch die Projektförderung MAT2016-79776-P (AEI/ FEDER, UE) und durch die EC-H2020-Programme “Graphen Flagship” (785219), FLAG-ERA – “GATES” (JTC-PCI2018-093137) und “ESTEEM3” (823717). A.C. bedankt sich bei ALN für die Unterstützung in Argentinien., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Plasmonic properties of an Ag@Ag2Mo2O7 hybrid nanostructure easily designed by solid-state photodeposition from very thin Ag2Mo2O7 nanowires

  • Hakouk, Khadija
  • Lajaunie, Luc
  • El Bekkachi, Houda
  • Serier-Brault, Hélène
  • Humbert, Bernard
  • Arenal, Raúl
  • Dessapt, Rémi
A new Ag@m-Ag2Mo2O7 plasmonic hybrid nanostructure was designed by an easy two-step synthesis method. Firstly, very thin photosensitive monoclinic m-Ag2Mo2O7 nanowires (NWs) were synthesized under ambient pressure and at low temperature by using Ag2Mo3O10·2H2O NWs as a pre-nanostucturated starting material. This innovative soft chemistry route offers some precise control over the purity, the structure and the nanostructuration of the m-Ag2Mo2O7 NWs that exhibit a very thin diameter of around 100 nm and a superior specific surface area compared to previously reported synthesis methods. Secondly, the plasmonic hybrid nanostructure Ag@m-Ag2Mo2O7 was easily in situ obtained via an all solid-state photodeposition method, by irradiating the m-Ag2Mo2O7 NWs under low energy and low-power UV-light. The composition, morphology and plasmonic properties of the nanocomposite were investigated by a combination of energy-dispersive X-ray spectroscopy, high-resolution scanning transmission electron microscopy, X-ray photoelectron spectroscopy and Auger spectroscopy, and near-infrared, Raman and UV-vis spectroscopies as well as spatially-resolved electron energy-loss spectroscopy. A plausible mechanism explaining the formation of the nano-heterostructure under irradiation was also discussed. The Ag@m-Ag2Mo2O7 nanostructure manifests interesting plasmonic properties particularly high surface-enhanced Raman scattering (SERS) sensitivity probed using 2,2′-bipyridine., R. A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26) and from the European Union H2020 program ETN project “Enabling Excellence” Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Platinum tripods as nanometric frequency multiplexing devices

  • Camargo, Bruno Cury
  • Lassagne, Benjamin
  • Arenal, Raúl
  • Gatel, Christophe
  • Blon, Thomas
  • Viau, Guillaume
  • Lacroix, Lise-Marie
  • Escoffier, Walter
arXiv:1806.09942v1, Electrical and structural characterization studies of nano-particles are very important steps to determine their potential applications in microelectronics. In this paper, we address the crystallographic and electric transport properties of soft-chemistry-grown nanometric Pt tribranches. We report that Pt nanostars grown from the reduction of H2PtCl6 salt in pure oleylamine present a remarkable crystalline structure and deeply metallic character despite being grown under mild conditions. We demonstrate that such devices are able to operate at current densities surpassing 200 MA cm-2, actuating as highly compact frequency multiplexers in the non-ohmic regime., This work has received funding from the People Programme (MarieCurie Actions) of the European Union's Seventh Framework Programme (FP7/2007-2013) under REA grant agreement no. PCOFUND-GA-2013-609102, through the PRESTIGE programme coordinated by Campus France. This work was also supported by the Programme Investissements d'Avenir under the programme ANR-11-IDEX-002-02, ref. ANR-10-LABX-0037-NEXT, and by the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3). L. M. L., C. G. and R. A. gratefully acknowledge the European Associated Laboratory (LEA)-TALEM2 for financial support. R. A. gratefully acknowledges support from the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26). R. A. gratefully acknowledges support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant no. MAT2016-79776-P (AEI/FEDER, UE). The HR-STEM tomography studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. The Government of Aragon and the European Social Fund are gratefully acknowledged. B. C. C. acknowledges financial support from the Polish National Science Center under project number UMO-2014/15/B/ST3/03889. High magnetic field measurements were performed at the LMCMI under proposal no. TMS02-215., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pumping metallic nanoparticles with spatial precision within magnetic mesoporous platforms: 3D Characterization and Catalytic Application

  • Miguel-Sancho, Nuria
  • Martínez, Gema
  • Sebastián, Víctor
  • Malumbres, Ana
  • Florea, Ileana
  • Arenal, Raúl
  • Ortega-Liébana, M. Carmen
  • Hueso, José L.
  • Santamaría, Jesús
The present work shows an efficient strategy to assemble two types of functional nanoparticles onto mesoporous MCM-41 silica nanospheres with a high degree of spatial precision. In a first stage, magnetite nanoparticles are synthesized with a size larger than the support pores and grafted covalently through a peptide-like bonding onto their external surface. This endowed the silica nanoparticles with a strong superparamagnetic response, while preserving the highly ordered interior space for the encapsulation of other functional guest species. Second, we report the finely controlled pumping of preformed Pt nanoparticles (1.5 nm) within the channels of the magnetic MCM-41 nanospheres to confer an additional catalytic functionality to the multiassembled nanoplatform. The penetration depth of the metallic nanoparticles can be explained as a result of the interplay between the particle–wall electrostatic attraction and the repulsive forces between neighboring Pt nanoparticles. A detailed transmission electron microscopy and a 3D high-resolution high-angle annular dark-field detector electron tomography study were carried out to characterize the material and to explain the assembly mechanism. Finally, the performance of these multifunctional nanohybrids as magnetically recoverable catalysts has been evaluated in the selective hydrogenation of p-nitrophenol, a well-known pollutant and intermediate in multiple industrial processes., Financial support from MINECO (Spain) and the CIBER-BBN (financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund) and European Research Council ERC-Advanced Grant HECTOR is gratefully acknowledged. The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit of the CIBER in BioEngineering, Biomaterials & Nanomedicine (CIBER-BBN). The microscopy works have been conducted in the “Laboratorio de Microscopias Avanzadas” at “Instituto de Nanociencia de Aragon”—Universidad de Zaragoza. V.S. and J.L.H. acknowledge the support of the People Program (CIG-Marie Curie Actions, REA grant agreement nos. 321642 and 294094). The Government of Aragon, and the European Social Fund are gratefully acknowledged. R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26) and the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pyrene-functionalized tungsten disulfide as stable resistive photosensor

  • Canton-Vitoria, Rubén
  • Nufer, Sebastian
  • Che, Xiaoyang
  • Sayed-Ahmad-Baraza, Yuman
  • Arenal, Raúl
  • Bittencourt, Carla
  • Brunton, Adam
  • Dalton, Alan B.
  • Ewels, Christopher P.
  • Tagmatarchis, Nikos
Pyrene carrying an 1,2-dithiolane linker was employed to functionalize exfoliated WS2 and the resulting material was used in a proof-of-concept application as a photoresistor type sensor. The WS2–pyrene hybrid material was comprehensively characterized by spectroscopic, thermal and microscopy techniques, coupled to density functional theory modelling. The high solubility of the WS2–pyrene hybrid material allows easy manipulation in wet media, making it suitable for device fabrication. Thus, a two-terminal resistive photosensor was developed and tested for photodetection. The photosensitivity of WS2 was improved by the presence of covalently attached pyrene by a factor of 2–3, the response linearly dependent on light intensity. Device reaction time was also improved, and critically the photosensor stability was significantly enhanced. Functionalization of exfoliated WS2 material heals vacancies, oxidation and other damage sites liable to impede photoelectric response. This proof-of-concept study opens the way for incorporation of diverse chromophores active in the visible and/or NIR region of the electromagnetic spectrum to WS2 in order to stabilise it and broaden its photoresistive sensing applicability., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 642742, under the “Graphene Flagship” project grant agreement no. 881603 and under the “ESTEEM3” project grant agreement no. 823717. Partial support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector” funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014–2020) and co-financed by Greece and the European Union (European Regional Development Fund) is also acknowledged. The HRSTEM and SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R. A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the MICINN (PID2019-104739GB-I00), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E13_17R). CB is research associate of FNRS-Belgium., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantum interference effects on the intensity of the G modes in double-walled carbon nanotubes

  • Tran, Huy Nam
  • Blancon, Jean Christophe
  • Arenal, Raúl
  • Parret, Romain
  • Zahab, Ahmed Azmi
  • Ayari, Anthony
  • Vallèe, Fabrice G.
  • Fatti, Natalia del
  • Sauvajol, Jean Louis
  • Paillet, Matthieu
The effects of quantum interferences on the excitation dependence of the intensity of 𝐺 modes have been investigated on single-walled carbon nanotubes [Duque et al., Phys. Rev. Lett. 108, 117404 (2012)]. In this work, by combining optical absorption spectroscopy and Raman scattering on individual index identified double-walled carbon nanotubes, we examine the experimental excitation dependence of the intensity of longitudinal optical and transverse optical 𝐺 modes of the constituent inner and outer single-walled carbon nanotubes. The observed striking dependencies are understood in terms of quantum interference effects. Considering such effects, the excitation dependence of the different components of the 𝐺 modes permits us to unambiguously assign each of them as originating from the longitudinal or transverse 𝐺 modes of inner and outer tubes., H.N.T., R.P., A.A.Z., J.L.S., and M.P. acknowledge financial support by the ANR GAMBIT project, Grant No. ANR-13-BS10-0014 of the French Agence Nationale de la Recherche, and the International project of Scientific Cooperation with Vietnam (CNRS PICS 6457). J.-C.B., A.A., F.V., and N.D.F. acknowledge financial support by ANR programme P2N under Contract ANR-11-NANO-025. The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement No. 312483- ESTEEM2 (Integrated Infrastructure Initiative I3). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad [FIS2013-46159- C3-3-P and MAT2016-79776-P (AEI/FEDER, UE)] and from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (Grant No. E/26)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quaternary chalcogenide-based misfit nanotubes LnS(Se)-TaS(Se)2 (Ln = La, Ce, Nd, and Ho): Synthesis and atomic structural studies

  • Lajaunie, Luc
  • Radovsky, Gal
  • Tenne, Reshef
  • Arenal, Raúl
We have synthesized quaternary chalcogenide-based misfit nanotubes LnS(Se)-TaS2(Se) (Ln = La, Ce, Nd, and Ho). None of the compounds described here were reported in the literature as a bulk compound. The characterization of these nanotubes, at the atomic level, has been developed via different transmission electron microscopy techniques, including high-resolution scanning transmission electron microscopy, electron diffraction, and electron energy-loss spectroscopy. In particular, quantification at sub-nanometer scale was achieved by acquiring high-quality electron energy-loss spectra at high energy (∼between 1000 and 2500 eV). Remarkably, the sulfur was found to reside primarily in the distorted rocksalt LnS lattice, while the Se is associated with the hexagonal TaSe2 site. Consequently, these quaternary misfit layered compounds in the form of nanostructures possess a double superstructure of La/Ta and S/Se with the same periodicity. In addition, the interlayer spacing between the layers and the interatomic distances within the layer vary systematically in the nanotubes, showing clear reduction when going from the lightest (La atom) to the heaviest (Ho) atom. Amorphous layers, of different nature, were observed at the surface of the nanotubes. For La-based NTs, the thin external amorphous layer (inferior to 10 nm) can be ascribed to a Se deficiency. Contrarily, for Ho-based NTs, the thick amorphous layer (between 10 and 20 nm) is clearly ascribed to oxidation. All of these findings helped us to understand the atomic structure of these new compounds and nanotubes thereof., The STEM (HR-ADF imaging, EDS and EELS) studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P, from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26). The electron microscopy was performed at the Irving and Cherna Moscowitz Center for Nano and Bio-Nano Imaging of the Weizmann Institute of Science grant No. 7208214. We acknowledge the support of the Perlman Family Foundation; the Kimmel Center for Nanoscale Science grant No. 43535000350000; the German-Israeli Foundation (GIF) grant No. 712053; and the Irving and Azelle Waltcher Foundations in honor of Prof. M. Levy grant No. 720821., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Systematic study of oxygen vacancy tunable transport properties of few-layer MoO3−x enabled by vapor-based synthesis

  • Hanson, Eve D.
  • Lajaunie, Luc
  • Arenal, Raúl
  • Dravid, Vinayak P.
Vinayak P. Dravid et al., Bulk and nanoscale molybdenum trioxide (MoO3) has shown impressive technologically relevant properties, but deeper investigation into 2D MoO3 has been prevented by the lack of reliable vapor-based synthesis and doping techniques. Herein, the successful synthesis of high-quality, few-layer MoO3 down to bilayer thickness via physical vapor deposition is reported. The electronic structure of MoO3 can be strongly modified by introducing oxygen substoichiometry (MoO3−x), which introduces gap states and increases conductivity. A dose-controlled electron irradiation technique to introduce oxygen vacancies into the few-layer MoO3 structure is presented, thereby adding n-type doping. By combining in situ transport with core-loss and monochromated low-loss scanning transmission electron microscopy–electron energy-loss spectroscopy studies, a detailed structure–property relationship is developed between Mo-oxidation state and resistance. Transport properties are reported for MoO3−x down to three layers thick, the most 2D-like MoO3−x transport hitherto reported. Combining these results with density functional theory calculations, a radiolysis-based mechanism for the irradiation-induced oxygen vacancy introduction is developed, including insights into favorable configurations of oxygen defects. These systematic studies represent an important step forward in bringing few-layer MoO3 and MoO3−x into the 2D family, as well as highlight the promise of MoO3−x as a functional, tunable electronic material., This material is partially based upon work supported by the National Science Foundation under Grant No. DMR-1507810. The EELS study was conducted at the Laboratorio de Microscopías Avanzadas, Instituto de Nanociencia de Aragón, Universidad de Zaragoza, Spain. Some of the research leading to these results had received funding from the European Union Seventh Framework Programme under Grant Agreements 312483- ESTEEM2 (Integrated Infrastructure Initiative-I3). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P and MAT2016-79776-P) and from the European Union H2020 programs ETN project “Enabling Excellence” Grant Agreement 642742 and “Graphene Flagship” Grant Agreement 696656. S.H. and C.W. (DFT calculations) acknowledge support by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, under Grant No. DEFG02-07ER46433. This work made use of the EPIC and SPID facilities of the NUANCE Center at Northwestern University, which has received support from the Soft and Hybrid Nanotechnology Experimental (SHyNE) Resource (NSF NNCI-1542205); the MRSEC program (NSF DMR-1121262) at the Materials Research Center; the International Institute for Nanotechnology (IIN); the Keck Foundation; and the State of Illinois, through the IIN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

TEMPO-oxidized cellulose nanofibers as interfacial strengthener in continuous-fiber reinforced polymer composites

  • Uribe, B.E.B.
  • Chiromito, E.M.S.
  • Carvalho, A.J.F.
  • Arenal, Raúl
  • Tarpani, Jose Ricardo
This paper presents a fast and practical route to improve the stress transfer of continuous fiber-reinforced polymer matrix composite laminates. This method concerns on-the-surface treatment of unsized carbon and glass fiber fabrics with 2,2,6,6-TetraMethyl-1-PiperidinylOxy (TEMPO) oxidized cellulose nanofibers before the laminate manufacturing step. The proposed method generated an increase in ultimate flexural strength of 62% and 54% for carbon and glass fiber-reinforced epoxy, respectively, and enhanced the out-of-plane properties of both hierarchical systems, as proved by short beam strength test, which showed an improvement of approximately 40% for both. The nanocellulose interphase was measured via transmission electron microscopy and energy-dispersive X-ray spectroscopy (EDS) techniques, showing a thickness of approximately 20 nm for the hierarchical carbon fiber composite laminate., Taking into account these results, this method demonstrates to be a useful alternative in the design and manufacturing of modern hierarchical composite structures., This work was supported by CNPq - Brazilian Council for Scientific and Technological Development [process number 140339/2015-9]; Laboratory for Surface Science and Brazilian Nanotechnology National Laboratory (LNNano) [proposal AFM 20681, 2016]; European Union Seventh Framework Programme [Grant Agreements 312483 - ESTEEM2 (Integrated Infrastructure Initiative - I3)]; Spanish Ministry of Economy and Competitiveness (MINECO) [project grants: FIS2013-46159-C3-3-P and MAT2016-79776-P (AEI/FEDER, UE)]; Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 [grant number E/26]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The growth and improved magnetoelectric response of strain-modified Aurivillius SrBi4.25La0.75Ti4FeO18 thin films

  • Venkata Ramana, E.
  • Prasad, N. V.
  • Figueiras, F.
  • Lajaunie, Luc
  • Arenal, Raúl
  • Otero-Irurueta, G.
  • Valente, M. A.
In this study, we grew 5-layered SrBi4.25La0.75Ti4FeO18 (SBLFT) polycrystalline thin films (80-330 nm thick) via pulsed-laser deposition to study their ferroelectric and magnetoelectric response. Structural/microstructural analysis confirmed the formation of orthorhombic SBLFT with good crystallinity and randomly oriented Aurivillius phases. Detailed scanning transmission electron microscopy analysis of 120 nm film revealed a predominantly five-layered structure with the coexistence of four-layer stacking. Such stacking defects are found to be pertinent to the high structural flexibility of Bi-rich Aurivillius phases, alleviated by lattice strain. Raman spectral features at ambient temperatures depict the signature of the orthorhombic-tetragonal phase transition. SBLFT films have a strong ferroelectric nature (remanent polarization 2Pr of 35 μC cm-2) with a fatigue endurance up to 1010 cycles and strongly improved, switchable magnetization as opposed to its antiferromagnetic bulk counterpart. The scaling behavior of dynamic hysteresis reveals that ferroelectric domain reversal has good stability and low energy consumption. We observed the presence of SBLFT nanoregions (1-5 nm), distributed across the film, with Bi and Fe-rich compositions and oxygen vacancies that contribute to the weak ferromagnetic behavior mediated by the Dzyaloshinskii-Moriya interactions. Subtle changes in the structural strain and lattice distortions of thin films with varied thicknesses led to distinct ferroic properties. Stronger ferroelectric polarization of 80 nm and 120 nm films compared to that of thicker ones can be due to structural strain and the possible rearrangement of BO6 octahedra. The observation of the improved magnetoelectric coefficient of 50 mV cm-1 Oe-1 for 120 nm film, as compared to that of several Aurivillius oxides, indicates that the structural strain modification in SBLFT is beneficial for the fatigue-free magnetic field switching of ferroelectric polarization. The structural strain of the unit cell as well as the presence of Bi- and ferromagnetic Fe-rich nanoregions was found to be responsible for the improved multiferroic behaviour of the SBLFT films., This work was supported by national funds through the Portuguese foundation for science and technology (FCT) through grants SFRH/BPD/75582/2010, SFRH/BPD/80663/2011, COMPETE 2020, national funds (UID/CTM/50025/2013) and when appropriate co-financed by FEDER under the PT2020 Partnership Agreement. The projects IFIMUP-IN, Norte-070124-FEDER-000070 and CICECO-AIM, POCI-01-0145-FEDER-007679. FCT Ref. UID/CTM/50011/2013, PTDC/FIS-NAN/0533/2012, CERN/FIS/NUC/0004/2015, UID/FIS/04650/2013 are also acknowledged. The HR-STEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R. A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project MAT2016-79776-P (AEF/FEDER. UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Three-dimensional branched and faceted gold–ruthenium nanoparticles: Using nanostructure to improve stability in oxygen evolution electrocatalysis

  • Gloag, Lucy
  • Lacroix, Lise-Marie
  • Arenal, Raúl
  • Florea, Ileana
  • Tilley, Richard D.
Richard D. Tilley et al., Achieving stability with highly active Ru nanoparticles for electrocatalysis is a major challenge for the oxygen evolution reaction. As improved stability of Ru catalysts has been shown for bulk surfaces with low-index facets, there is an opportunity to incorporate these stable facets into Ru nanoparticles. Now, a new solution synthesis is presented in which hexagonal close-packed structured Ru is grown on Au to form nanoparticles with 3D branches. Exposing low-index facets on these 3D branches creates stable reaction kinetics to achieve high activity and the highest stability observed for Ru nanoparticle oxygen evolution reaction catalysts. These design principles provide a synthetic strategy to achieve stable and active electrocatalysts., L.G. thanks the Australian Government for an APA. We acknowledge the Electron Microscope Unit of the Mark Wainwright Analytical Centre at UNSW, the ChemiSTEM and TEM at Ernst-Ruska Centre, Forschungszentrum Juelich, Germany and TEM at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza. J.J.G. acknowledges the ARC Centre of Excellence in Convergent Bio-Nano Science and Technology (CE140100036,) and ARC Australian Laureate Fellowship (FL150100060). R.A. acknowledges the Government of Aragon and the European Social Fund., “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26), the Spanish Ministry of Economy and Competitiveness (MINECO) MAT2016-79776-P (AEI/FEDER, UE) and the EU H2020 program ETN Grant Agreement 642742. This work was supported by Programme Investissements d'Avenir ANR-11-IDEX-0002-02, reference ANR-10-LABX-0037-NEXT. We acknowledge the European Associated Laboratory (LEA)-TALEM2 for financial support and the European Union Seventh Framework Program under Grant Agreement 312483—ESTEEM2. W.S. acknowledges the DFG for financial support grant “RESOLV”; EXC1069., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrathin gold nanowires with the polytetrahedral structure of bulk manganese

  • Vargas, Jorge A.
  • Petkov, Valeri
  • Nouh, El Said A.
  • Ramamoorthy, Raj Kumar
  • Lacroix, Lise-Marie
  • Poteau, Romuald
  • Viau, Guillaume
  • Lecante, Pierre
  • Arenal, Raúl
Despite the intensive interest in thin gold nanowires for a variety of technologically important applications, key details of the mechanism of their formation and atomic-scale structure remain unknown. Here we synthesize highly uniform, very long, and ultrathin gold nanowires in a liquid-phase environment and study their nucleation and growth using in situ high-energy synchrotron X-ray diffraction. By controlling the type of solvents, reducing agents, and gold precursor concentration, it is shown that the nucleation and growth of gold nanowires involve the emergence and self-assembly of transient linear gold complexes, respectively. In sharp contrast with the face-centered-cubic bulk gold, the evolved nanowires are found to possess a tetrahedrally close packed structure incorporating distorted icosahedra and larger size coordination polyhedra of the type observed with the room-temperature phase of bulk manganese. We relate the complexes to synergistic effects between the selected precursor and reducing agents that become appreciable over a narrow range of their molar ratios. We attribute the unusual structural state of gold nanowires to geometrical frustration effects arising from the conflicting tendencies of assemblies of metal atoms to evolve toward attaining high atomic packing density while keeping the atomic-level stresses low, ultimately favoring the growth of cylindrical nanowires with a well-defined diameter and atomically smooth surface. Our work provides a roadmap for comprehensive characterization and, hence, better understanding of 1D metallic nanostructures with an unusual atomic arrangement and may have important implications for their synthesis and performance in practical applications., This work was supported by DOE-BES grant DE-SC0006877. The authors acknowledge financial support from the Labex NEXT, No. 11 LABX 075, and the European Associated Laboratory LEA TALEM. E.S.A.N. thanks the French Institute in Cairo (Egypt), the Science and Technology Fund (STDF), and INSA Toulouse for awarding a Fellowship to support this research. E.S.A.N. gratefully acknowledges the help from Egyptian Nuclear Materials Authority (Cairo) for granting him a sabbatical leave to carry out this work at INSA. This work used resources of the Advanced Photon Source at the Argonne National Laboratory provided by the DOE Office of Science under contract no. DE-AC02-06CH11357. Thanks are due to Dr. K. Beyer for the help with the HE-XRD experiments. The HR-STEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through grant MAT2016-79776-P (AEI/FEDER, UE). R.P. thanks the HPCs CALcul en MIdi-Pyrénées (CALMIP-EOS, grant P0611) and the Grand Equipement National de Calcul Intensif (GENCI-TGCC, grant 0810168) for generous allocations of computer time., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Weakly trapped, charged, and free excitons in single-layer MoS2 in the presence of defects, strain, and charged impurities

  • Dubey, Sudipta
  • Arenal, Raúl
  • Coraux, Johann
Johann Coraux et al., Few- and single-layer MoS2 host substantial densities of defects. They are thought to influence the doping level, the crystal structure, and the binding of electron–hole pairs. We disentangle the concomitant spectroscopic expression of all three effects and identify to what extent they are intrinsic to the material or extrinsic to it, i.e., related to its local environment. We do so by using different sources of MoS2—a natural one and one prepared at high pressure and high temperature—and different substrates bringing varying amounts of charged impurities and by separating the contributions of internal strain and doping in Raman spectra. Photoluminescence unveils various optically active excitonic complexes. We discover a defect-bound state having a low binding energy of 20 meV that does not appear sensitive to strain and doping, unlike charged excitons. Conversely, the defect does not significantly dope or strain MoS2. Scanning tunneling microscopy and density functional theory simulations point to substitutional atoms, presumably individual nitrogen atoms at the sulfur site. Our work shows the way to a systematic understanding of the effect of external and internal fields on the optical properties of two-dimensional materials., This work was supported by the European Union H2020 Graphene Flagship program (grants no. 604391 and 696656) and the 2DTransformers project under the OH-RISQUE program (ANR-14-OHRI-0004) and J2D (ANR-15-CE24-0017) and DIRACFORMAG (ANR-14-CE32-0003) projects of Agence Nationale de la Recherche (ANR). G.N. and V.B. are thankful for support from CEFIPRA. The STEM (imaging and EELS) studies were conducted at the Laboratorio de Microscopiías Avanzadas, Instituto de Nanociencia de Aragón, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) and from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26). We thank Jacek Kasprzak, Tomasz Jakubczyk, Maxime Richard, and Le Si Dang for insightful discussions. C.G. acknowledges financial support from Spanish Ministry of Economy and Competitiveness, through the Marı́a de Maeztu Program for Units of Excellence in R&D (grant no. MDM-2014-0377)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Quantum interference effects on the intensity of the G modes in double-walled carbon nanotubes

  • Tran, H.N.
  • Blancon, J.C.
  • Arenal, R.
  • Parret, R.
  • Zahab, A.A.
  • Ayari, A.
  • Vallée, F.
  • Del Fatti, N.
  • Sauvajol, J.L.
  • Paillet, M.
The effects of quantum interferences on the excitation dependence of the intensity of G modes have been investigated on single-walled carbon nanotubes [Duque, Phys. Rev. Lett. 108, 117404 (2012)PRLTAO0031-900710.1103/PhysRevLett.108.117404]. In this work, by combining optical absorption spectroscopy and Raman scattering on individual index identified double-walled carbon nanotubes, we examine the experimental excitation dependence of the intensity of longitudinal optical and transverse optical G modes of the constituent inner and outer single-walled carbon nanotubes. The observed striking dependencies are understood in terms of quantum interference effects. Considering such effects, the excitation dependence of the different components of the G modes permits us to unambiguously assign each of them as originating from the longitudinal or transverse G modes of inner and outer tubes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Graphene oxide-carbon nanotube hybrid assemblies: Cooperatively strengthened OH¿O=C hydrogen bonds and the removal of chemisorbed water

  • Núñez, J.D.
  • Benito, A.M.
  • Rouzière, S.
  • Launois, P.
  • Arenal, R.
  • Ajayan, P.M.
  • Maser, W.K.
Owing to their great significance for energy storage and sensing applications, multi-layer papers consisting of graphene oxide-carbon nanotube (GO-CNT) hybrid sheets were prepared by in situ exfoliation of graphite oxide in the presence of oxidized CNTs (oCNTs). For the first time we elucidate the influence of oCNTs on chemisorbed water (CW), i.e. the water molecules inherently bound to the oxygen functional groups (OFGs) of graphene oxide (GO) and responsible for irreversible structural damage upon thermal reduction processes. We show that oCNTs self-assemble onto GO sheets during the liquid phase processing steps by forming cooperatively strengthened OH¿OC hydrogen bonds between the carboxylic groups of the oCNTs and OFGs of GO. At oCNT amounts of about 10 to 15 wt% this leads to the displacement of considerable amounts of CW without altering the original chemical composition of GO. The thermally reduced GO-CNT (rGO-CNT) papers reveal improved sp2 character and an enhancement of the specific capacitance by 75% with respect to thermally reduced GO (rGO), largely due to the effective removal of CW by oxidized CNTs. These findings disclose the relevance of the cooperative hydrogen bonding phenomena in graphene oxide paper/film electrodes for the development of improved electrochemical energy storage and sensing devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Pumping Metallic Nanoparticles with Spatial Precision within Magnetic Mesoporous Platforms: 3D Characterization and Catalytic Application

  • Miguel-Sancho, N.
  • Martinez, G.
  • Sebastian, V.
  • Malumbres, A.
  • Florea, I.
  • Arenal, R.
  • Ortega-Liebana, M.C.
  • Hueso, J.L.
  • Santamaria, J.
The present work shows an efficient strategy to assemble two types of functional nanoparticles onto mesoporous MCM-41 silica nanospheres with a high degree of spatial precision. In a first stage, magnetite nanoparticles are synthesized with a size larger than the support pores and grafted covalently through a peptide-like bonding onto their external surface. This endowed the silica nanoparticles with a strong superparamagnetic response, while preserving the highly ordered interior space for the encapsulation of other functional guest species. Second, we report the finely controlled pumping of preformed Pt nanoparticles (1.5 nm) within the channels of the magnetic MCM-41 nanospheres to confer an additional catalytic functionality to the multiassembled nanoplatform. The penetration depth of the metallic nanoparticles can be explained as a result of the interplay between the particle-wall electrostatic attraction and the repulsive forces between neighboring Pt nanoparticles. A detailed transmission electron microscopy and a 3D high-resolution high-angle annular dark-field detector electron tomography study were carried out to characterize the material and to explain the assembly mechanism. Finally, the performance of these multifunctional nanohybrids as magnetically recoverable catalysts has been evaluated in the selective hydrogenation of p-nitrophenol, a well-known pollutant and intermediate in multiple industrial processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Photoluminescence from an individual double-walled carbon nanotube

  • Levshov, D.I.
  • Parret, R.
  • Tran, H.-N.
  • Michel, T.
  • Cao, T.T.
  • Nguyen, V.C.
  • Arenal, R.
  • Popov, V.N.
  • Rochal, S.B.
  • Sauvajol, J.-L.
  • Zahab, A.-A.
  • Paillet, M.
We report direct and unambiguous evidence of the existence of inner semiconducting tube (ISCT) photoluminescence (PL) from measurements performed on four individual freestanding index-identified double-walled carbon nanotubes (DWNTs). Based on thorough Rayleigh scattering, Raman scattering, and PL experiments, we are able to demonstrate that the ISCT PL is observed with a quantum yield estimated to be a few 10-6 independent of the semiconducting or metallic nature of the outer tube. This result is mainly attributed to ultrafast exciton transfer from the inner to outer tube. Furthermore, by carrying out PL excitation experiments on the (14, 1)@(15, 12) DWNT, we show that the ISCT PL can be detected through the optical excitation of the outer tube, indicating that the exciton transfer can also occur in the opposite way.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Evolution and stabilization of subnanometric metal species in confined space by in situ TEM

  • Liu, L.
  • Zakharov, D.N.
  • Arenal, R.
  • Concepcion, P.
  • Stach, E.A.
  • Corma, A.
Understanding the behavior and dynamic structural transformation of subnanometric metal species under reaction conditions will be helpful for understanding catalytic phenomena and for developing more efficient and stable catalysts based on single atoms and clusters. In this work, the evolution and stabilization of subnanometric Pt species confined in MCM-22 zeolite has been studied by in situ transmission electron microscopy (TEM). By correlating the results from in situ TEM studies and the results obtained in a continuous fix-bed reactor, it has been possible to delimitate the factors that control the dynamic agglomeration and redispersion behavior of metal species under reaction conditions. The dynamic reversible transformation between atomically dispersed Pt species and clusters/nanoparticles during CO oxidation at different temperatures has been elucidated. It has also been confirmed that subnanometric Pt clusters can be stabilized in MCM-22 crystallites during NO reduction with CO and H2.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Functionalization of MoS2 with 1, 2-dithiolanes: toward donor-acceptor nanohybrids for energy conversion

  • Canton-Vitoria, R.
  • Sayed-Ahmad-Baraza, Y.
  • Pelaez-Fernandez, M.
  • Arenal, R.
  • Bittencourt, C.
  • Ewels, C.P.
  • Tagmatarchis, N.
The covalent functionalization of exfoliated semiconducting MoS2 by 1, 2-dithiolanes bearing an ethylene glycol alkyl chain terminated to a butoxycarbonyl-protected amine and a photoactive pyrene moiety is accomplished. The MoS2-based nanohybrids were fully characterized by complementary spectroscopic, thermal, and microscopy techniques. Markedly, density functional theoretical studies combined with X-ray photoelectron spectroscopy analysis demonstrate preferential edge functionalization, primarily via sulfur addition along partially sulfur saturated zig-zag MoS2 molybdenum-edges, preserving intact the 2D basal structure of functionalized MoS2-based nanohybrids as confirmed by high-resolution transmission electron microscopy and electron energy loss spectroscopy. Furthermore, in the MoS2-pyrene hybrid, appreciable electronic interactions at the excited state between the photoactive pyrene and the semiconducting MoS2 were revealed as inferred by steady-state and time-resolved photoluminescence spectroscopy, implying its high potentiality to function in energy conversion schemes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Systematic study of Oxygen vacancy tunable transport properties of few-layer MoO3- x enabled by vapor-based synthesis

  • Hanson, E.D.
  • Lajaunie, L.
  • Hao, S.
  • Myers, B.D.
  • Shi, F.
  • Murthy, A.A.
  • Wolverton, C.
  • Arenal, R.
  • Dravid, V.P.
Bulk and nanoscale molybdenum trioxide (MoO3) has shown impressive technologically relevant properties, but deeper investigation into 2D MoO3 has been prevented by the lack of reliable vapor-based synthesis and doping techniques. Herein, the successful synthesis of high-quality, few-layer MoO3 down to bilayer thickness via physical vapor deposition is reported. The electronic structure of MoO3 can be strongly modified by introducing oxygen substoichiometry (MoO3- x), which introduces gap states and increases conductivity. A dose-controlled electron irradiation technique to introduce oxygen vacancies into the few-layer MoO3 structure is presented, thereby adding n-type doping. By combining in situ transport with core-loss and monochromated low-loss scanning transmission electron microscopy–electron energy-loss spectroscopy studies, a detailed structure–property relationship is developed between Mo-oxidation state and resistance. Transport properties are reported for MoO3- x down to three layers thick, the most 2D-like MoO3- x transport hitherto reported. Combining these results with density functional theory calculations, a radiolysis-based mechanism for the irradiation-induced oxygen vacancy introduction is developed, including insights into favorable configurations of oxygen defects. These systematic studies represent an important step forward in bringing few-layer MoO3 and MoO3- x into the 2D family, as well as highlight the promise of MoO3- x as a functional, tunable electronic material.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

EELS Studies on Nanodiamonds and Amorphous Diamond-like Carbon Materials

  • Arenal, Raúl
Chemical analyses at the local (sub-nanometer/atomic) scale are crucial for improving the understanding of materials. For instance, for doped carbon nanostructures (as those of diamond family), these analyses are critical because their properties strongly depend on the chemical environment/configuration of the dopants ...
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Quaternary ChalCogenide-Based Misfit Nanotubes LnS(Se)-TaS(Se)(2) (Ln = La, Ce, Nd, and Ho): Synthesis and Atomic Structural Studies

  • Lajaunie, L.
  • Radovsky, G.
  • Tenne, R.
  • Arenal, R.
We have synthesized quaternary chalcogenide-based misfit nanotubes LnS(Se)-TaS2(Se) (Ln = La, Ce, Nd, and Ho). None of the compounds described here were reported in the literature as a bulk compound. The characterization of these nanotubes, at the atomic level, has been developed via different transmission electron microscopy techniques, including high-resolution scanning transmission electron microscopy, electron diffraction, and electron energy-loss spectroscopy. In particular, quantification at sub-nanometer scale was achieved by acquiring high-quality electron energy-loss spectra at high energy (similar to between 1000 and 2500 eV). Remarkably, the sulfur was found to reside primarily in the distorted rocksalt LnS lattice, while the Se is associated-with the hexagonal TaSe2 site. Consequently, these quaternary misfit layered compounds in the form of nanostructures possess a double superstructure of La/Ta and S/Se with the same periodicity. In addition, the interlayer spacing between the layers and the interatomic distances within the layer vary systematically in the nanotubes, showing clear reduction when going from the lightest (La atom) to the heaviest (Ho) atom. Amorphous layers, of different nature, were Observed at the surface of the nanotubes. For La-based NTs, the thin external amorphous layer (inferior to 10 nm) can be ascribed to a Se deficiency. Contrarily, for Ho-based NTs, the thick amorphous layer (between 10 and 20 nm) is clearly ascribed to oxidation. All of these findings helped us to understand the atomic structure of these new compounds and nanotubes thereof.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Weakly Trapped, Charged, and Free Excitons in Single-Layer MoS2 in the Presence of Defects, Strain, and Charged Impurities

  • Dubey, S.
  • Lisi, S.
  • Nayak, G.
  • Herziger, F.
  • Nguyen, V.-D.
  • Le Quang, T.
  • Cherkez, V.
  • González, C.
  • Dappe, Y.J.
  • Watanabe, K.
  • Taniguchi, T.
  • Magaud, L.
  • Mallet, P.
  • Veuillen, J.-Y.
  • Arenal, R.
  • Marty, L.
  • Renard, J.
  • Bendiab, N.
  • Coraux, J.
  • Bouchiat, V.
Few- and single-layer MoS2 host substantial densities of defects. They are thought to influence the doping level, the crystal structure, and the binding of electron-hole pairs. We disentangle the concomitant spectroscopic expression of all three effects and identify to what extent they are intrinsic to the material or extrinsic to it, i.e., related to its local environment. We do so by using different sources of MoS2 - a natural one and one prepared at high pressure and high temperature - and different substrates bringing varying amounts of charged impurities and by separating the contributions of internal strain and doping in Raman spectra. Photoluminescence unveils various optically active excitonic complexes. We discover a defect-bound state having a low binding energy of 20 meV that does not appear sensitive to strain and doping, unlike charged excitons. Conversely, the defect does not significantly dope or strain MoS2. Scanning tunneling microscopy and density functional theory simulations point to substitutional atoms, presumably individual nitrogen atoms at the sulfur site. Our work shows the way to a systematic understanding of the effect of external and internal fields on the optical properties of two-dimensional materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Extraordinary sensitizing effect of co-doped carbon nanodots derived from mate herb: application to enhanced photocatalytic degradation of chlorinated wastewater compounds under visible light

  • Ortega-Liebana, M. Carmen
  • Hueso, José L.
  • Ferdousi, Shammi
  • Arenal, Raul
  • Irusta, Silvia
  • Yeung, King L.
  • Santamaria, Jesus
tThe present work investigates the role of two types of carbon nanodots (CNDs) as novel sensitizers of TiO2to create a visible-light driven photo-catalyst that is not only efficient for solar-driven pollution abate-ment, but also inexpensive, durable and environmentally-friendly. Two widely available green organicprecursors, the Argentinean herb Mate and the Stevia plant have been selected as the carbogenic sourceto thermally induce the formation of different types of CNDs with different levels of N and P doping andtunable photoluminescence response in the UV–vis-near infrared (NIR) ranges. These CNDs have beensuccessfully assembled with TiO2to form heterogeneous photocatalysts that are highly active in thevisible-light and NIR- driven photodegradation of 2,4-dichlorophenol (2,4-DCP), a persistent chlorinatedorganic compound present in numerous pesticide formulations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

In-situ preparation of ultra-small Pt nanoparticles within rod-shaped mesoporous silica particles: 3-D tomography and catalytic oxidation of n-hexane

  • Uson, Laura
  • Hueso, José L.
  • Sebastian, Víctor
  • Arenal, Raul
  • Florea, Ileana
  • Irusta, Silvia
  • Arruebo, Manuel
  • Santamaria, Jesús
The shape and porous configuration of supports are key parameters to design outstanding catalysts. However, the selection of a proper mesoporous support, such as SBA-15, by itself does not guarantee accessibility to catalytic sites. The distribution of the active phase and its stability are strongly related to the procedure used to deposit it on the catalytic substrate. Herein, we have prepared rod-shaped SBA-15 silica supports functionalized with amine groups to facilitate the electrostatic attraction and a good distribution of the resulting Pt-based catalytic nanoparticles along the pore walls. Additionally, the use of tetrakis-(hydroxymethyl)-phosphonium chloride (THPC) as both reductant and stabilizer is presented as a novel alternative for Pt nanoparticle synthesis. The behaviour of this catalyst in the total oxidation of n-hexane demonstrates high activity and excellent stability after 70 h on reaction stream. STEM-HAADF and 3-D tomography were used to confirm the presence of the metallic nanoparticles within the mesochannels and to corroborate their reduced sintering after reaction.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Hybrid Noble-Metals/Metal-Oxide Bifunctional Nano-Heterostructure Displaying Outperforming Gas-Sensing and Photochromic Performances

  • Tobaldi, D.M.
  • Leonardi, S.G.
  • Movlaee, K.
  • Lajaunie, L.
  • Seabra, M.P.
  • Arenal, R.
  • Neri, G.
  • Labrincha, J.A.
As nanomaterials are dominating 21st century''s scene, multiple functionality in a single (nano)structure is becoming very appealing. Inspired by the Land of the Rising Sun, we designed a bifunctional (gas-sensor/photochromic) nanomaterial, made with TiO2 whose surface was simultaneously decorated with copper and silver (the Cu/Ag molar ratio being 3:1). This nanomaterial outperformed previous state-of-the-art TiO2-based sensors for the detection of acetone, as well as the Cu-TiO2-based photochromic material. It indeed possessed splendid sensitivity toward acetone (detection limit of 100 ppb, 5 times lower than previous state-of-the-art TiO2-based acetone sensors), as well as reduced response/recovery times at very low working temperature, 150 °C, for acetone sensing. Still, the same material showed itself to be able to (reversibly) change in color when stimulated by both UV-A and, most remarkably, visible light. Indeed, the visible-light photochromic performance was almost 3 times faster compared to the standard Cu-TiO2 photochromic material - that is, 4.0 min versus 10.8 min, respectively. It was eventually proposed that the photochromic behavior was triggered by different mechanisms, depending on the light source used.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Generation of gold nanoclusters encapsulated in an MCM-22 zeolite for the aerobic oxidation of cyclohexane

  • Liu, L.
  • Arenal, R.
  • Meira, D.M.
  • Corma, A.
In this work, we will report the generation of Au clusters in a purely siliceous MCM-22 zeolite. The catalytic properties of these Au clusters have been tested for the selective oxidation of cyclohexane to cyclohexanol and cyclohexanone (KA-oil). The Au clusters encapsulated in the MCM-22 zeolite are highly active and selective for the oxidation of cyclohexane to KA-oil, which is superior to Au nanoparticles on the same support. These results suggest that Au clusters are highly active for the activation of oxygen to produce radical species.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

An overview of the recent advances in inorganic nanotubes

  • Serra, Marco
  • Arenal, Raul
  • Tenne, Reshef
Advanced nanomaterials play a prominent role in nanoscience and nanotechnology developments, opening new frontiers in these areas. Among these nanomaterials, due to their unique characteristics and enhanced chemical and physical properties, inorganic nanotubes have been considered one of the most interesting nanostructures. In recent years, important progress has been achieved in the production and study of these nanomaterials, including boron nitride, transition metal dichalcogenide nanotubular structures, misfit-based nanotubes and other hybrid/doped nanotubular objects. This review is devoted to the in-depth analysis of recent studies on the synthesis, atomic structures, properties and applications of inorganic nanotubes and related nanostructures. Particular attention is paid to the growth mechanism of these nanomaterials. This is a crucial point for the challenges ahead related to the mass production of high-quality defect-free nanotubes for a variety of applications. © The Royal Society of Chemistry 2019.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optoelectronic properties of calcium cobalt oxide misfit nanotubes

  • Lajaunie, L.
  • Ramasubramaniam, A.
  • Panchakarla, L.S.
  • Arenal, R.
We report on the optoelectronic properties of a recently discovered nanotubular phase of misfit-layered calcium cobalt oxide, CaCoO2-CoO2. Individual nanotubes are investigated by spatially resolved electron energy-loss spectroscopy experiments performed in a transmission electron microscope, and complementary first-principles, time-dependent hybrid density-functional theory calculations are performed to elucidate the electronic structure and optical spectra. We find that the band gap is independent of the geometry of the nanotubes, and experimental and calculated results independently confirm an optical gap of 1.9-2.1 eV for the CaCoO2-CoO2 nanotubes. The time-dependent hybrid density-functional theory calculations also suggest the existence of strongly bound intralayer excitons (up to 0.5 eV binding energy), which could allow for optoelectronic applications of these nanotubes at near-infrared to visible (~1.5-2 eV) wavelengths.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Multiband light emission and nanoscale chemical analyses of carbonized fumed silica

  • Vasin, A.V.
  • Kysil, D.V.
  • Lajaunie, L.
  • Rudko, G.Y.
  • Lysenko, V.S.
  • Sevostianov, S.V.
  • Tertykh, V.A.
  • Piryatinski, Y.P.
  • Cannas, M.
  • Vaccaro, L.
  • Arenal, R.
  • Nazarov, A.N.
Fumed silica with a specific area of 295 m(2)/g was carbonized by successive phenyltrimethoxysilane treatments followed by annealing in inert atmosphere up to 650 degrees C. Emission, excitation, kinetics, and photo-induced bleaching effects were investigated by steady state and time-resolved photoluminescence spectroscopies. The local chemistry was also studied by infrared transmission spectroscopy. Strong ultraviolet and visible photoluminescence was observed in the samples after the chemical treatments/modifications and thermal annealing. It has been shown that ultraviolet photoluminescence in chemically modified fumed silica is associated with phenyl groups, while near ultraviolet and visible emission in annealed samples originated from inorganic pyrolytic carbon precipitates dispersed in the silica host matrix. Two types of emission bands were identified as a function of the annealing temperature: one is in the near UV and the other is in the visible range. Based on the emission/excitation analysis of these two bands, as well as on correlations with the synthesis conditions, a structural-energy concept of light-emitting centers has been proposed. According to this model, the light-emitting centers are associated with carbon clusters that can be bonded or adsorbed on the silica surface. This has been validated by a detailed (S)TEM-electron energy-loss spectroscopy study, confirming the inhomogeneous distribution of nanoscale carbon precipitates at the surface of the silica nanoparticles. These carbon precipitates are mostly amorphous although they possess some degree of graphitization and local order. Finally, the fraction of sp(2) carbon in these nanoclusters has been estimated to be close to 80%. Published by AIP Publishing.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Plasmonic properties of an Ag@Ag2Mo2O7 hybrid nanostructure easily designed by solid-state photodeposition from very thin Ag2Mo2O7 nanowires

  • Hakouk, K.
  • Lajaunie, L.
  • El Bekkachi, H.
  • Serier-Brault, H.
  • Humbert, B.
  • Arenal, R.
  • Dessapt, R.
A new Ag@m-Ag2Mo2O7 plasmonic hybrid nanostructure was designed by an easy two-step synthesis method. Firstly, very thin photosensitive monoclinic m-Ag2Mo2O7 nanowires (NWs) were synthesized under ambient pressure and at low temperature by using Ag2Mo3O10·2H2O NWs as a pre-nanostucturated starting material. This innovative soft chemistry route offers some precise control over the purity, the structure and the nanostructuration of the m-Ag2Mo2O7 NWs that exhibit a very thin diameter of around 100 nm and a superior specific surface area compared to previously reported synthesis methods. Secondly, the plasmonic hybrid nanostructure Ag@m-Ag2Mo2O7 was easily in situ obtained via an all solid-state photodeposition method, by irradiating the m-Ag2Mo2O7 NWs under low energy and low-power UV-light. The composition, morphology and plasmonic properties of the nanocomposite were investigated by a combination of energy-dispersive X-ray spectroscopy, high-resolution scanning transmission electron microscopy, X-ray photoelectron spectroscopy and Auger spectroscopy, and near-infrared, Raman and UV-vis spectroscopies as well as spatially-resolved electron energy-loss spectroscopy. A plausible mechanism explaining the formation of the nano-heterostructure under irradiation was also discussed. The Ag@m-Ag2Mo2O7 nanostructure manifests interesting plasmonic properties particularly high surface-enhanced Raman scattering (SERS) sensitivity probed using 2, 2'-bipyridine.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanotubes from the Misfit Compound Alloy LaS-NbxTa(1- x)S2

  • Stolovas, D.
  • Serra, M.
  • Popovitz-Biro, R.
  • Pinkas, I.
  • Houben, L.
  • Calvino, J.J.
  • Joselevich, E.
  • Tenne, R.
  • Arenal, R.
  • Lajaunie, L.
Misfit layered compounds (MLC) with the composition (LaS)1.15TaS2 (for simplicity denoted as LaS-TaS2) and LaS-NbS2 were prepared and studied in the past. Nanotubes of LaS-TaS2 could be easily synthesized, while tubular structure of the LaS-NbS2 were found to be rather rare in the product. To understand this riddle, quaternary alloys of LaS-NbxTa(1-x)S2 with ascending Nb concentration were prepared herein in the form of nanotubes (and platelets). Not surprisingly, the concentration of these quaternary nanotubes shrank (and the relative density of platelets increased) with increasing Nb content in the precursor. The structure and chemical composition of such nanotubes was elucidated by electron microscopy. Conceivably, the TaS2 in the MLC compounds LnS-TaS2 (Ln = lanthanide atom) crystallizes in the 2H polytype. High resolution transmission electron microscopy showed however that, invariably, MLC nanotubes prepared from 80 at% Nb content in the precursor belonged to the 1T polytype. Raman spectroscopy of individual tubes revealed that up to 60 at% Nb, they obey the standard model of MLC, while higher Nb lead to large deviations, which are discussed in brief. The analysis indicated also that such nanotubes do not exhibit the pattern assigned to charge density wave transition so typical for binary 1T-TaS2. The prospect for revealing interesting quasi-1D behavior of such quaternary nanotubes is also briefly discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Chemical Ordering in Bimetallic FeCo Nanoparticles: From a Direct Chemical Synthesis to Application As Efficient High-Frequency Magnetic Material

  • Garnero, C.
  • Lepesant, M.
  • Garcia-Marcelot, C.
  • Shin, Y.
  • Meny, C.
  • Farger, P.
  • Warot-Fonrose, B.
  • Arenal, R.
  • Viau, G.
  • Soulantica, K.
  • Fau, P.
  • Poveda, P.
  • Lacroix, L.M.
  • Chaudret, B.
Single-crystalline FeCo nanoparticles with tunable size and shape were prepared by co-decomposing two metal-amide precursors under mild conditions. The nature of the ligands introduced in this organometallic synthesis drastically affects the reactivity of the precursors and, thus, the chemical distribution within the nanoparticles. The presence of the B2 short-range order was evidenced in FeCo nanoparticles prepared in the presence of HDAHCl ligands, combining 57 Fe Mössbauer, zero-field 59 Co ferromagnetic nuclear resonance (FNR), and X-ray diffraction studies. This is the first time that the B2 structure is directly formed during synthesis without the need of any annealing step. The as-prepared nanoparticles exhibit magnetic properties comparable with the ones for the bulk (M s = 226 Am 2 ·kg -1 ). Composite magnetic materials prepared from these FeCo nanoparticles led to a successful proof-of-concept of the integration on inductor-based filters (27% enhancement of the inductance value at 100 MHz).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Percolating Metallic Structures Templated on Laser-Deposited Carbon Nanofoams Derived from Graphene Oxide: Applications in Humidity Sensing

  • Nufer, Sebastian
  • Fantanas, Dimitrios
  • Ogilvie, Sean P.
  • Large, Matthew J.
  • Winterauer, Dominik J.
  • Salvage, Jonathan P.
  • Meloni, Manuela
  • King, Alice A. K.
  • Schellenberger, Pascale
  • Shmeliov, Aleksey
  • Victor-Roman, Sandra
  • Pelaez-Fernandez, Mario
  • Nicolosi, Valeria
  • Arenal, Raul
  • Benito, Ana M.
  • Maser, Wolfgang
  • Brunton, Adam
  • Dalton, Alan B.
Carbon nanofoam (CNF) is a low-density, high-surface-area material formed by aggregation of amorphous carbon nanoparticles into porous nanostructures. We report the use of a pulsed infrared laser to prepare CNF from a graphene oxide (GO) target material. Electron microscopy shows that the films consist of dendritic strings that form web-like three-dimensional structures. The conductivity of these structures can be modified by using the CNF as a nanostructured scaffold for gold nanoparticles deposited by sputter coating, controllably increasing the conductivity by up to 4 orders of magnitude. The ability to measure the conductivity of the porous structures allows electrochemical measurements in the environment. Upon decreasing humidity, the pristine CNF exhibits an increase in resistance with a quick response and recovery time. By contrast, the gold-sputtered CNF showed a decrease in resistance, indicating modification of the doping mechanism due to water adsorption. The sensitivity to humidity is eliminated at the percolation threshold of the metal on the CNF.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Interfacing Transition Metal Dichalcogenides with Carbon Nanodots for Managing Photoinduced Energy and Charge-Transfer Processes

  • Vallan, L.
  • Canton-Vitoria, R.
  • Gobeze, H.B.
  • Jang, Y.
  • Arenal, R.
  • Benito, A.M.
  • Maser, W.K.
  • D''Souza, F.
  • Tagmatarchis, N.
Exfoliated semiconducting MoS2 and WS2 were covalently functionalized with 1, 2-dithiolane-modified carbon nanodots (CNDs). The newly synthesized CND-MoS2 and CND-WS2 hybrids were characterized by spectroscopic, thermal, and electron microscopy imaging methods. Based on electronic absorption and fluorescence emission spectroscopy, modulation of the optoelectronic properties of TMDs by interfacing with CNDs was accomplished. Electrochemical studies revealed facile oxidation of MoS2 over WS2 in the examined hybrids, suggesting it to be better electron donor. Excited state events, investigated by femtosecond transient absorption spectroscopic studies, revealed ultrafast energy transfer from photoexcited CNDs to both MoS2 and WS2. Interestingly, upon MoS2 photoexcitation, charge transfer from an exciton dissociation path of MoS2 to CNDs, within CND-MoS2, was observed. However, such a process in CND-WS2 was found to be absent due to energetic reasons. The present study highlights the importance of TMD-derived donor-acceptor hybrids in light energy harvesting and optoelectronic applications. Furthermore, the fundamental information obtained from the current results will benefit design strategies and impact the additional TMD-based hybrid materials to efficiently manage and perform in electron-transfer processes. development of additional TMD-based hybrid materials to efficiently manage and perform in electron-transfer processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Green synthesis of cavity-containing manganese oxides with superior catalytic performance in toluene oxidation

  • Garcia, Tomás
  • López, José Manuel
  • Mayoral, Álvaro
  • Zhang, Yaping
  • Arenal, Raul
  • Alonso-Dominguez, Daniel
  • Pico, María Pilar
  • Lopez, María Luisa
  • Dejoz, Ana
  • Alvarez-Serrano, Inmaculada
  • Sanchis, Rut
  • Solsona, Benjamín
Manganese oxide prepared by a simple hydrothermal method is highly active and stable in both lab and quasi industrial conditions for the total oxidation of toluene, achieving total conversion at only 175 degrees C in the absence of water and at 150 degrees C in the presence of 4 mol % water. Moreover, this performance is stable for at least 6 cycles. The enhanced catalytic performance has been related to the presence of highly reactive oxygen surface species. This species are probably promoted by Mn3O4 nanoparticles with Mn3+ at the tetragonal distorted cationic sites, likely compensated by structural water at the anionic sites. The presence of structural water can be related to the formation of internal cavities/vesicles in the Mn3O4 crystalline structure.