Skip to main content

VALORIZACION DE “COMPOSITES” NANOESTRUCTURADOS DE ARCILLA Y OXIDOS DE METALES CON APLICACIONES TECNOLOGICAS EN PROCESOS ELECTROQUIMICOS

MAT2017-84118-C2-2-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Research data Set de datos (Dataset)

Synthesis and Characterisation of TiO2/ZnO2 hybrid nanostructures formed by electrodeposition with different Zn(NO3)2 concentrations and used in photoelectrochemical applications [Dataset], Influence of Zn(NO3)2 concentration during the ZnO electrodeposition on TiO2 nanosponges used in photoelectrochemical applications

  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Navarro-Gázquez, Pedro José
  • Solsona-Espriu, Benjamín
  • Fernández-Domene, Ramón Manuel
  • Sánchez Tovar, Rita
The dataset contains the data that have been obtained during the synthesis and the characterization (structural, compositional, and electrochemical) of TiO2/ZnO2 hybrid nanostructures used in photoelectrochemical applications. TiO2/ZnO hybrid nanostructures were synthetized by electrochemical anodization of titanium to form TiO2 nanosponges with crystalline structure and subsequently ZnO electrodeposition. Different Zn(NO3)2 concentrations were used for electrodeposition (10–60 mM). A structural and compositional characterisation was performed using X-Ray Diffraction (XRD). Electrochemical characterisation of nanostructures was performed by Photoelectrochemical Water Splitting (PWS), stability to photocorrosion, Electrochemical Impedance Spectroscopy (EIS), and Mott-Schottky tests.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Eco-friendly cavity-containing iron oxides prepared by mild routes as very efficient catalysts for the total oxidation of VOCs

  • Sanchis, Rut
  • Alonso-Domínguez, Daniel
  • Dejoz, Ana
  • Pico, María Pilar
  • Álvarez-Serrano, Inmaculada
  • García Martínez, Tomás
  • López, María Luisa
  • Solsona, Benjamín
Iron oxides (FeOx) are non-toxic, non-expensive and environmentally friendly compounds, which makes them good candidates for many industrial applications, among them catalysis. In the present article five catalysts based on FeOx were synthesized by mild routes: hydrothermal in subcritical and supercritical conditions (Fe-HT, Few200, Few450) and solvothermal (Fe-ST1 and Fe-ST2). The catalytic activity of these catalysts was studied for the total oxidation of toluene using very demanding conditions with high space velocities and including water and CO2 in the feed. The samples were characterized by X-ray diffraction (XRD), scanning and high-resolution transmission electron microscopy (SEM and HRTEM), X-ray photoelectron spectroscopy (XPS) and nitrogen adsorption-desorption isotherms. It was observed that the most active catalyst was a cavity-containing porous sample prepared by a solvothermal method with a relatively high surface area (55 m2 g−1) and constituted by flower-like aggregates with open cavities at the catalyst surface. This catalyst displayed superior performance (100% of toluene conversion at 325 °C using highly demanding conditions) and this performance can be maintained for several catalytic cycles. Interestingly, the porous iron oxides present not only a higher catalytic activity than the non-porous but also a higher specific activity per surface area. The high activity of this catalyst has been related to the possible synergistic effect of compositional, structural and microstructural features emphasizing the role of the surface area, the crystalline phase present, and the properties of the surface., Authors from UV thank the University of Valencia (UV-INV-AE16-484416 project) and MINECO (MAT2017-84118-C2-1-R project) for funding. Authors from UCM thank Santander-UCM institution (PR41/17-20951 project) and MINECO (MAT2017-84118-C2-2-R project) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Green synthesis of cavity-containing manganese oxides with superior catalytic performance in toluene oxidation

  • García Martínez, Tomás
  • López Sebastián, José Manuel
  • Mayoral, Álvaro
  • Zhang, Yaping
  • Arenal, Raúl
  • Alonso-Domínguez, Daniel
  • Pico, María Pilar
  • López, María Luisa
  • Dejoz, Ana
  • Álvarez-Serrano, Inmaculada
  • Sanchis, Rut
  • Solsona, Benjamín
10 Figuras.- 2 Tablas.- Datos suplementarios disponibles en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Manganese oxide prepared by a simple hydrothermal method is highly active and stable in both lab and quasi industrial conditions for the total oxidation of toluene, achieving total conversion at only 175 °C in the absence of water and at 150 °C in the presence of 4 mol % water. Moreover, this performance is stable for at least 6 cycles. The enhanced catalytic performance has been related to the presence of highly reactive oxygen surface species. This species are probably promoted by Mn3O4 nanoparticles with Mn3+ at the tetragonal distorted cationic sites, likely compensated by structural water at the anionic sites. The presence of structural water can be related to the formation of internal cavities/vesicles in the Mn3O4 crystalline structure., AM and YZ acknowledge The Centre for High-resolution Electron Microscopy (CħEM), supported by SPST of ShanghaiTech University under contract No. EM02161943. Electron microscopy analyses were performed at Centre for High-Resolution Electron Microscopy (CћEM), ShanghaiTech University. AM acknowledges the National Natural Science Foundation of China through the projects NSFC NFSC-21850410448 and NSFC- 21835002. Authors from UCM thank Santander-UCM institution (PR41/17-20951 project) and MINECO (MAT2017-84118-C2-2-R project) and UCM CAI centers (XRD and EM). TG and JML thank Regional Aragon Government (DGA) under the research groups support programme. Some of the STEM analyses were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R. A. acknowledges support from Spanish MINECO grant MAT2016-79776-P (AEI/FEDER, UE), from the Government of Aragon and the European Social Fund (E13_17R, FEDER) and from the European Union H2020 program “ESTEEM3” (grant 823717) Authors from UV thank MINECO (MAT2017-84118-C2-1-R project) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Low temperature conversion of levulinic acid into γ-valerolactone using Zn to generate hydrogen from water and nickel catalysts supported on sepiolite

  • García Moreno, Adrián
  • Sanchis, Rut
  • Miguel, P.J.
  • Dejoz, Ana
  • Pico, María Pilar
  • López, María Luisa
  • Álvarez-Serrano, Inmaculada
  • García Martínez, Tomás
  • Solsona, Benjamín
1 scheme, 2 tables, 7 figures.-- Supplementary material available., In the present article, gamma-valerolactone has been obtained from levulinic acid with a yield exceeding 25% using very mild conditions without feeding hydrogen (30 degrees C, atmospheric pressure, water as the hydrogen source). The overall reaction conducted is a two-step process: first, a redox reaction involving the oxidation of metallic Zn to ZnO for in situ hydrogen production through the water splitting reaction and, second, a catalytic reaction involving Ni-supported catalysts for the production of gamma-valerolactone from levulinic acid. Ni active sites have been supported on sepiolite, an abundant and cheap material. The nickel particle size has been demonstrated to be a parameter of paramount importance determining the catalytic activity, since the best catalytic performance is obtained with the smallest Ni nanoparticles. This combination of Zn and Ni supported on sepiolite shows a good catalytic stability after three catalytic runs., Authors from UCM thank MINECO (MAT2017-84118-C2-2-R project) and UCM CAI center of EM. Authors from UV thank MINECO (MAT2017-84118-C2-1-R project) and FEDER for funding. A. G. thanks MINECO for the pre-doctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gamma-valerolactone from levulinic acid and its esters: Substrate and reaction media determine the optimal catalyst, γ-valerolactone from levulinic acid and its esters: Substrate and reaction media determine the optimal catalyst

  • García Moreno, Adrián
  • Miguel, P.J.
  • Pico, María Pilar
  • Álvarez-Serrano, Inmaculada
  • López, María Luisa
  • García Martínez, Tomás
  • Solsona, Benjamín
13 figures, 7 tables.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0, Ni-based catalysts supported on sepiolite were synthesized by different preparation procedures for the production of γ-valerolactone from levulinic acid and its esters (methyl levulinate and ethyl levulinate). The optimal performance was related to the formation of tiny nickel particles. Interestingly, the reaction conditions significantly influence the reactivity of the substrates. The catalytic performance of the optimal Ni/sepiolite catalyst was compared with two catalysts of ruthenium (supported on γ-alumina or sepiolite). In all cases, the production of γ-valerolactone depends on both the substrate employed and the reaction media. Overall, the preferred reaction media using the Ni-catalyst is 2-propanol whereas pressurized hydrogen in water is the best alternative for Ru-catalysts. In both cases, a reasonable stability has been observed after 3 cycles. Finally, the use of metallic Zn in an aqueous medium to provide hydrogen could not be considered as an appropriate option due to the lack of a stable behaviour., Authors from UCM thank MINECO(MAT2017-84118-C2-2-R project) and UCM CAI center of EM. Authors from UV thank MINECO (MAT2017-84118-C2-1-R project) and FEDER for funding. A.G. thanks MINECO for the pre-doctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Obtaining and Characterization of Highly Crystalline Recycled Graphites from Different Types of Spent Batteries

  • Alcaraz, Lorena
  • Díaz-Guerra, Carlos
  • Calbet, Joaquín
  • Lopez, María Luisa
  • López Gómez, Félix Antonio
Spent batteries recycling is an important way to obtain low-cost graphite. Nevertheless, the obtaining of crystalline graphite with a rather low density of defects is required for many applications. In the present work, high-quality graphites have been obtained from different kinds of spent batteries. Black masses from spent alkaline batteries (batteries black masses, BBM), and lithium-ion batteries from smartphones (smartphone black masses, SBM) and electric and/or hybrid vehicles (lithium-ion black masses, LBM) were used as starting materials. A hydrometallurgical process was then used to obtain recycled graphites by acidic leaching. Different leaching conditions were used depending on the type of the initial black mass. The final solids were characterized by a wide set of complementary techniques. The performance as Li ion batteries anode of the sample with better structural quality was assessed., This work has been funded by the European Union′s Horizon 2020 research and innovation program under grant agreement No 776851 (CarE Service), the Spanish Ministry of Economy and Competitiveness (MINECO) under project MAT2017-84118-C2-2-R and by Banco Santander-UCM through project PR87/19-22613.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Zr supported on non-acidic sepiolite for the efficient one-pot transformation of furfural into γ-valerolactone

  • García Moreno, Adrián
  • Monti, Eleonora
  • Ventimiglia, Alessia
  • Dimitratos, Nikolaos
  • Miguel, P.J.
  • López, María Luisa
  • Álvarez Serrano, Inmaculada
  • García Martínez, Tomás
  • Pico, María Pilar
  • Dejoz, Ana
  • Solsona, Benjamín
10 figures y 4 tables.-- Supplementary information available., The growing demand of energy needs the search for alternative energy sources different to fossil fuels. The use of biomass as energy source is one of the most studied, because there are high value products that can be produced from biomass. One of these products is γ-valerolactone, that can be obtained from furfural, which is a biomass derived product. To transform furfural into γ-valerolactone is necessary a bifunctional catalyst and a hydrogen source. In this work, γ-valerolactone was obtained from furfural using 2-propanol as solvent and as hydrogen donor on Zr supported on sepiolite catalysts. It was demonstrated that sepiolite, which is a cheap material, can be used to develop efficient catalysts to produce high yields to γ-valerolactone from furfural in one-pot. The catalysts that presented the highest yield to γ-valerolactone were the ones with intermediate Zr-content (9–17 wt% ZrO2). The highest TOFs have been obtained by those catalysts with Zr-loading up to 9 wt% ZrO2, in which the ZrO2 nanoparticles are well dispersed on the support and no formation of large clusters of ZrO2 has been observed. Lewis and Brønsted acid sites are essential in the catalysts to produce the reactions to transform furfural into γ-valerolactone in one-pot, although in the present work, low concentration of Brønsted acid sites were observed in the catalysts. A possible positive role of basic sites to promote some intermediate steps has been also proposed. The catalytic results obtained are in the order of catalysts with Zr supported on zeolitic supports., A.G. thanks MINECO for the pre-doctoral grant (PRE2018-085211). This work was funded by the MAT2017-84118-C2-1-R, MAT2017-84118-C2-2-R, MCIN/AEI/10.13039/501100011033/projects and FEDER Una manera de hacer Europa. Authors thank the electron microscopy CAI center of UCM. Authors also thank the Generalitat Valenciana for CIAICO/2021/094., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Green synthesis of cavity-containing manganese oxides with superior catalytic performance in toluene oxidation

  • Garcia, Tomás
  • López, José Manuel
  • Mayoral, Álvaro
  • Zhang, Yaping
  • Arenal, Raul
  • Alonso-Dominguez, Daniel
  • Pico, María Pilar
  • Lopez, María Luisa
  • Dejoz, Ana
  • Alvarez-Serrano, Inmaculada
  • Sanchis, Rut
  • Solsona, Benjamín
Manganese oxide prepared by a simple hydrothermal method is highly active and stable in both lab and quasi industrial conditions for the total oxidation of toluene, achieving total conversion at only 175 degrees C in the absence of water and at 150 degrees C in the presence of 4 mol % water. Moreover, this performance is stable for at least 6 cycles. The enhanced catalytic performance has been related to the presence of highly reactive oxygen surface species. This species are probably promoted by Mn3O4 nanoparticles with Mn3+ at the tetragonal distorted cationic sites, likely compensated by structural water at the anionic sites. The presence of structural water can be related to the formation of internal cavities/vesicles in the Mn3O4 crystalline structure.