Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 277
Encontrada(s) 3 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Bottom-up fabrication and atomic-scale characterization of triply linked, laterally π-extended porphyrin nanotapes

  • Sun, Qiang
  • Mateo, Luis M.
  • Robles, Roberto
  • Lorente, Nicolas
  • Ruffieux, Pascal
  • Bottari, Giovanni
  • Torres Cebada, Tomás
  • Fasel, Roman
Porphyrin nanotapes (Por NTs) are promising structures for their use as molecular wires thanks to a high degree of π-conjugation, low HOMO—LUMO gaps, and exceptional conductance. Such structures have been prepared in solution, but their on-surface synthesis remains unreported. Here, meso–meso triply fused Por NTs have been prepared through a two-step synthesis on Au(111). The diradical character of the on-surface formed building block PorA2, a phenalenyl π-extended ZnIIPor, facilitates intermolecular homocoupling and allows for the formation of laterally π-extended tapes. The structural and electronic properties of individual Por NTs are addressed, both on Au(111) and on a thin insulating NaCl layer, by high-resolution scanning probe microscopy/spectroscopy complemented by DFT calculations. These Por NTs carry one unpaired electron at each end, which leads to magnetic end states. Our study provides a versatile route towards Por NTs and the atomic-scale characterization of such tapes, This work was supported by the Swiss National Science Foundation under Grant No. 200020_182015, the European UnionQs Horizon 2020 research and innovation programme under grant agreement number 785219 (Graphene Flagship Core 2), the Office of Naval Research (N00014-18-1-2708), MINECO, CTQ2017-85393-P (Phthalophoto, T.T.), and PID2020-116490GB-I00 (Porphyrinoids, T.T., G.B.). IMDEA Nanociencia also acknowledges support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). R.R. and N.L. are grateful for funding from the EU-FET Open H2020 Mechanics with Molecules project (grant 766864)
Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Integrating van der Waals materials on paper substrates for electrical and optical applications

Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Magnetic interplay between π-electrons of open-shell porphyrins and d-electrons of their central transition metal ions

  • Sun, Qiang
  • Mateo De Doni, Luis Manuel
  • Robles, Roberto
  • Ruffieux, Pascal
  • Bottari, Giovanni
  • Torres Cebada, Tomás
  • Fasel, Roman
  • Lorente, Nicolás
Magnetism is typically associated with d- or f-block elements, but can also appear in organic molecules with unpaired π-electrons. This has considerably boosted the interest in such organic materials with large potential for spintronics and quantum applications. While several materials showing either d/f or π-electron magnetism have been synthesized, the combination of both features within the same structure has only scarcely been reported. Open-shell porphyrins (Pors) incorporating d-block transition metal ions represent an ideal platform for the realization of such architectures. Herein, the preparation of a series of open-shell, π-extended Pors that contain magnetically active metal ions (i.e., CuII, CoII, and FeII) through a combination of in-solution and on-surface synthesis is reported. A detailed study of the magnetic interplay between π- and d-electrons in these metalloPors has been performed by scanning probe methods and density functional theory calculations. For the Cu and FePors, ferromagnetically coupled π-electrons are determined to be delocalized over the Por edges. For the CoPor, the authors find a Kondo resonance resulting from the singly occupied CoII dz2 orbital to dominate the magnetic fingerprint. The Fe derivative exhibits the highest magnetization of 3.67 μB (S≈2) and an exchange coupling of 16 meV between the π-electrons and the Fe d-states
Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Magnetization Signature of Topological Surface States in a Non-Symmorphic Superconductor

  • Kuang, Wenjun
  • Lopez-Polin Peña, Guillermo
  • Lee, Hyungjun
  • Guinea, Francisco
  • Whitehead, George
  • Timokhin, Ivan
  • Berdyugin, Alexey I.
  • Kumar, Roshan Krishna
  • Yazyev, Oleg V.
  • Walet, Niels
  • Principi, Alessandro
  • Geim, Andre K.
  • Grigorieva, Irina V.
Superconductors with nontrivial band structure topology represent a class of materials with unconventional and potentially useful properties. Recent years have seen much success in creating artificial hybrid structures exhibiting the main characteristics of 2D topological superconductors. Yet, bulk materials known to combine inherent superconductivity with nontrivial topology remain scarce, largely because distinguishing their central characteristic—the topological surface states—has proved challenging due to a dominant contribution from the superconducting bulk. In this work, a highly anomalous behavior of surface superconductivity in topologically nontrivial 3D superconductor In2Bi, where the surface states result from its nontrivial band structure, itself a consequence of the non-symmorphic crystal symmetry and strong spin–orbit coupling, is reported. In contrast to smoothly decreasing diamagnetic susceptibility above the bulk critical field, Hc2, as seen in conventional superconductors, a near-perfect, Meissner-like screening of low-frequency magnetic fields well above Hc2 is observed. The enhanced diamagnetism disappears at a new phase transition close to the critical field of surface superconductivity, Hc3. Using theoretical modeling, the anomalous screening is shown to be consistent with modification of surface superconductivity by the topological surface states. The possibility of detecting signatures of the surface states using macroscopic magnetization provides a new tool for the discovery and identification of topological superconductors
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The gate tunable 2D pn junction driven out-of-equilibrium

  • Chaves Romero, Ferney Alveiro|||0000-0001-9506-4485
  • Jiménez, David|||0000-0002-8148-198X
We have investigated the electrostatics and electronic transport of the gate tunable 2D pn junction by implementing a comprehensive physics-based simulator that self-consistently solves the 2D Poisson's equation coupled to the drift-diffusion current and continuity equations. The simulator considers the strong influence of the out-of-plane electric field through the gate dielectric and the presence of interface states. The impact of parameters such as gate capacitance, energy gap, and interface trap states density have been considered to model properties such as the depletion width, rectification factor, and depletion and diffusion capacitances. The present work opens the door to a wider exploration of potential advantages that gate tunable 2D pn junctions could bring in terms of figures of merit.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A Graphene Field-Effect Transistor Based Analogue Phase Shifter for High-Frequency Applications

  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Cuesta-López, Juan|||0000-0001-7905-9969
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Jiménez, David|||0000-0002-8148-198X
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
We present a graphene-based phase shifter for radio-frequency (RF) phase-array applications. The core of the designed phase-shifting system consists of a graphene field-effect transistor (GFET) used in a common source amplifier configuration. The phase of the RF signal is controlled by exploiting the quantum capacitance of graphene and its dependence on the terminal transistor biases. In particular, by independently tuning the applied gate-to-source and drain-to-source biases, we observe that the phase of the signal, in the super-high frequency band, can be varied nearly 200° with a constant gain of 2.5 dB. Additionally, if only the gate bias is used as control signal, and the drain is biased linearly dependent on the former (i.e., in a completely analogue operation), a phase shift of 85° can be achieved making use of just one transistor and keeping a gain of 0 dB with a maximum variation of 1.3 dB. The latter design can be improved by applying a balanced branch-line configuration showing to be competitive against other state-of-the-art phase shifters. This work paves the way towards the exploitation of graphene technology to become the core of active analogue phase shifters for high-frequency operation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Non-quasi-static effects in graphene field-effect transistors under high-frequency operation

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Jiménez, David|||0000-0002-8148-198X
We investigate the non-quasi-static (NQS) effects in graphene field-effect transistors (GFETs), which are relevant for the device operation at high frequencies as a result of significant carrier inertia. A small-signal NQS model is derived from the analytical solution of drift-diffusion equation coupled with the continuity equation, which can be expressed in terms of modified Bessel functions of the first kind. The NQS model can be conveniently simplified to provide an equivalent circuit of lumped elements ready to be used in standard circuit simulators. Taking into account only first-order NQS effects, accurate GFET-based circuit simulations up to several times the cutoff frequency (fT) can be performed. Notably, it reduces to the quasi-static (QS) approach when the operation frequency is below ~fT/4. To validate the NQS model, we have compared its outcome against simulations based on a multisegment approach consisting of breaking down the channel length in N equal segments described by the QS model each one.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Contact resistance extraction of graphene FET technologies based on individual device characterization

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Jiménez, David|||0000-0002-8148-198X
Straightforward contact resistance extraction methods based on electrical device characteristics are described and applied here to graphene field-effect transistors from different technologies. The methods are an educated adaptation of extraction procedures originally developed for conventional transistors by exploiting the drift-diffusion-like transport in graphene devices under certain bias conditions. In contrast to other available approaches for contact resistance extraction of graphene transistors, the practical methods used here do not require either the fabrication of dedicated test structures or internal device phenomena characterization. The methodologies are evaluated with simulation-based data and applied to fabricated devices. The extracted values are close to the ones obtained with other more intricate methodologies. Bias-dependent contact and channel resistances studies, bias-dependent high-frequency performance studies and contact engineering studies are enhanced and evaluated by the extracted contact resistance values.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Accuracy of Y-function methods for parameters extraction of two-dimensional FETs across different technologies

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Jiménez, David|||0000-0002-8148-198X
The accuracy of contact resistance values of two-dimensional (2D) field-effect transistors extracted with the Y-function considering the impact of the intrinsic mobility degradation is evaluated here. The difference between methodologies that take this factor into account and ignore it is pointed out by a detailed analysis of the approximations of the transport model used for each extraction. In contrast to the oftenly used approach where the intrinsic mobility degradation is neglected, a Y-function-based method considering a more complete transport model yields contact resistance values similar to reference values obtained by other intricate approaches. The latter values are more suitable also to describe experimental data of 2D devices of different technologies. The intrinsic mobility degradation factor of 2D transistors is experimentally characterised for the first time and its impact on the device performance is described and evaluated.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Input-Referred Low-Frequency Noise Analysis for Single-Layer Graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Jiménez, David|||0000-0002-8148-198X
The bias dependence of input-referred low-frequency noise (LFN), SVG, is a considerable facet for RF circuit design. SVG was considered constant in CMOS but this was contradicted by recent experimental and theoretical studies. In this brief, the behavior of SVG is investigated for single-layer graphene transistors (GFETs) based on a recently established physics-based compact model. A minimum of SVG is recorded at the bias point where transconductance is maximum which coincides with the peak of the well-known M-shape of the normalized output LFN; the model precisely captures this trend. Mobility fluctuation effect increases SVG toward lower currents near charge neutrality point (CNP), while carrier number fluctuation and series resistance effects mostly contribute away from CNP; thus, SVG obtains a parabolic shape versus gate voltage similar to CMOS devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Experimental Observation and Modeling of the Impact of Traps on Static and Analog/HF Performance of Graphene Transistors

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Wei, Wei
  • Pallecchi, Emiliano|||0000-0002-8682-7935
  • Happy, Henri|||0000-0003-2065-8080
  • Jiménez, David|||0000-0002-8148-198X
The trap-induced hysteresis on the performance of a graphene field-effect transistor is experimentally diminished here by applying consecutive gate-to-source voltage pulses of opposing polarity. This measurement scheme is a practical and suitable approach to obtain reproducible device characteristics. Trap-affected and trap-reduced experimental data enable a discussion regarding the impact of traps on static and dynamic device performance. An analytical drain current model calibrated with the experimental data enables the study of the trap effects on the channel potential within the device. High-frequency (HF) figures of merit and the intrinsic gain of the device obtained from both experimental and synthetic data with and without hysteresis show the importance of considering the generally overlooked impact of traps for analog and HF applications.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Impact performance on industrial scalable graphene reinforcement composites

  • del Cuvillo Mezquita, Ramón
  • Artero Guerrero, José Alfonso
  • Pernas Sánchez, Jesús
  • López Puente, Jorge
Carbon fiber reinforced epoxy laminates are widely used in the design and manufacturing of aeronautical structures. Among different manufacturing procedures, resin transfer moulding (RTM) has emerged as a cost-effective alternative to prepregs manufactured in an autoclave. However, the laminate obtained by RTM exhibits approximately 20% lower mechanical properties. To address this limitation, the addition of nanoparticles has been suggested as a solution. In this study, graphene particles were obtained by in-situ mechanical exfoliation in the resin and directly injected into the mould. The major achievement of this study is that the entire manufacturing process was performed at an industrial scale using the same tooling used to produce aircraft structures. Laminates with varying concentrations and dispersion times were manufactured using RTM and subjected to compression after impact tests, resulting in a 7.6% improvement. Furthermore, analysis through SEM techniques revealed the role of graphene in the bear capacity of the laminates. Finally, to demonstrate the feasibility of the proposed methodology in an industrial environment, a real aircraft structure was manufactured with graphene, without any modifications to the actual industrial process., This project has received funding from the European Union's Horizon 2020 research and innovation programme under Graphene Flagship grant agreement No 785219. Funding for APC: Universidad Carlos III de Madrid (Read & Publish Agreement CRUE-CSIC 2023).
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Polymer/enzyme-modified HF-etched carbon nanoelectrodes for single-cell analysis

  • Marquitan, Miriam
  • Ruff, Adrian
  • Bramini, Mattia|||0000-0002-0381-9391
  • Herlitze, Stefan
  • Mark, Melanie D.
  • Schuhmann, Wolfgang
The authors are grateful for financial support by the Deutsche Forschungsgemeinschaft (DFG) in the framework of the project FLAG-ERA JTC 15 “Graphtivity” (Schu929/14-1) and within the framework of the Cluster of Excellence RESOLV 602 (EXC-2033; project number 390677874) and European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement No. 785219 - Graphene Flagship - Core2., Carbon-based nanoelectrodes fabricated by means of pyrolysis of an alkane precursor gas purged through a glass capillary and subsequently etched with HF were modified with redox polymer/enzyme films for the detection of glucose at the single-cell level. Glucose oxidase (GOx) was immobilized and electrically wired by means of an Os-complex-modified redox polymer in a sequential dip coating process. For the synthesis of the redox polymer matrix, a poly(1-vinylimidazole-co-acrylamide)-based backbone was used that was first modified with the electron transfer mediator [Os(bpy)2Cl]+ (bpy = 2,2′-bipyridine) followed by the conversion of the amide groups within the acrylamide monomer into hydrazide groups in a polymer-analogue reaction. The hydrazide groups react readily with bifunctional epoxide-based crosslinkers ensuring high film stability. Insertion of the nanometre-sized polymer/enzyme modified electrodes into adherently growing single NG108-15 cells resulted in a positive current response correlating with the intracellular glucose concentration. Moreover, the nanosensors showed a stable current output without significant loss in performance after intracellular measurements., Deutsche Forschungsgemeinschaft (DFG) FLAG-ERA JTC 15 (Schu929/14-1), Cluster of Excellence RESOLV 602 (EXC-2033; 390677874), European Union’s Horizon 2020 Research and Innovation Programme No. 785219
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Two-dimensional tellurium-based diodes for RF applications

  • Askar, Abdelrahman M.
  • Pasadas Cantos, Francisco
The research of two-dimensional (2D) Tellurium (Te) or tellurene is thriving to address current challenges in emerging thin-film electronic and optoelectronic devices. However, the study of 2D-Te-based devices for high-frequency applications is still lacking in the literature. This work presents a comprehensive study of two types of radio frequency (RF) diodes based on 2D-Te flakes and exploits their distinct properties in two RF applications. First, a metal-insulator-semiconductor (MIS) structure is employed as a nonlinear device in a passive RF mixer, where the achieved conversion loss at 2.5 GHz and 5 GHz is as low as 24 dB and 29 dB, respectively. Then, a metal-semiconductor (MS) diode is tested as a zero-bias millimeter-wave power detector and reaches an outstanding linear-in-dB dynamic range over 40 dB, while having voltage responsivities as high as 257 V ⋅ W−1 at 1 GHz (up to 1 V detected output voltage) and 47 V ⋅ W−1 at 2.5 GHz (up to 0.26 V detected output voltage). These results show superior performance compared to other 2D material-based devices in a much more mature technological phase. Thus, the authors believe that this work demonstrates the potential of 2D-Te as a promising material for devices in emerging high-frequency electronics., MCIN/AEI/10.13039/501100011033, European Union NextGenerationEU/PRTR, German Research Foundation (DFG) under the projects GLECS2 (No. 653408), MOSTFLEX (653414),, The Natural Sciences and Engineering Research Council (NSERC) (RGPIN-2017-05810 and ALLRP 577611-22), The European Commission under the Horizon 2020 projects Graphene Flagship (No. 785219 and 881603), PAIDI 2020 and European Social Fund Operational Programme 2014-2020 no. 20804, Ministerio de Universidades, Grant no. CAS21/ 00483, Canada Foundation for Innovation (CFI), British Columbia Knowledge Development Fund (BCKDF), Western Economic Diversification Canada (WD), Simon Fraser University
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Hydrogenated graphene improves neuronal network maturation and excitatory transmission

  • Moschetta, Matteo
  • Lee, Jong-Young
  • Rodrigues, João
  • Podestà, Alice
  • Varvicchio, Omar
  • Son, Jangyup
  • Lee, Yangjin
  • Kim, Kwanpyo
  • Lee, Gwan-Hyoung
  • Benfenati, Fabio
  • Bramini, Mattia|||0000-0002-0381-9391
  • Capasso, Andrea
This work was supported by the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement Grant Agreement No. 785219—Graphene Flagship—Core2 and Ministero degli Affari Esteri e Cooperazione Internazionale of Italy (Farnesina – MAECI) (Grant No. EPNZ0082). M.B. acknowledges supports from the EU Graphene Flagship-Core2 (Grant Agreement No. 785219) and the MSCA-COFUND Athenea3i scheme under the Grant Agreement No. 754446. J.S. acknowledges the support of the grant by the KIST Institution Programs (2Z06030, 2K02420). Y.L. and K.K. acknowledge support from the Institute for Basic Science (IBS-R026-D1). G.H.L. acknowledges supports from Basic Science Research Program and the International Research & Development Program through the NRF of Korea (2016M3A7B4910940, 2019K1A3A1A25000267) and Creative-Pioneering Researchers Program through Seoul National University (SNU). A.C. acknowledges the support of the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska–Curie grant agreement No. 713640., Graphene is regarded as a viable bio-interface for neuroscience due to its biocompatibility and electrical conductivity, which would contribute to efficient neuronal network signaling. Here, monolayer graphene grown via chemical vapor deposition is treated with remote hydrogen plasma to demonstrate that hydrogenated graphene (HGr) fosters improved cell-to-cell communication with respect to pristine graphene in primary cortical neurons. When transferred to polyethylene terephthalate, HGr exhibits higher wettability than graphene (water contact angle of 83.7° vs 40.7°), while preserving electrical conductivity (≈3 kΩ □-1). A rich and mature network is observed to develop onto HGr. The intrinsic excitability and firing properties of neurons plated onto HGr appears unaltered, while the basic passive and active membrane properties are fully preserved. The formation of excitatory synaptic connections increases in HGr with respect to pristine graphene, leading to a doubled miniature excitatory postsynaptic current frequency. This study supports the use of hydrogenation for tailoring graphene into an improved neuronal interface, indicating that wettability, more than electrical conductivity, is the key parameter to be controlled. The use of HGr can bring about a deeper understanding of neuronal behavior on artificial bio-interfaces and provide new insight for graphene-based biomedical applications., European Union’s Horizon 2020 No. 785219, Ministero degli Affari Esteri e Cooperazione Internazionale of Italy No. EPNZ0082, EU Graphene Flagship-Core2 No. 785219, MSCA-COFUND Athenea3i No. 754446, KIST Institution Programs (2Z06030, 2K02420), Institute for Basic Science (IBS-R026-D1), Basic Science Research Program and the International Research & Development Program through the NRF of Korea (2016M3A7B4910940, 2019K1A3A1A25000267), Seoul National University (SNU), European Union’s Horizon 2020 Marie Skłodowska–Curie No. 713640
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

On-Surface Thermal Stability of a Graphenic Structure Incorporating a Tropone Moiety

  • Rodríguez Márquez, Irene
  • Villalobos Romero, Federico
  • Cuerva Carvajal, Juan Manuel|||0000-0001-6896-9617
  • González Campaña, Araceli
We acknowledge the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (ERC-2015-STG-677023 and ERC-2013-SYG-610256 NANOCOSMOS) and the innovation program under grant agreement No. 696656 (GrapheneCore1-Graphene-based disruptive technologies) and grant agreement No. 785219 (GrapheneCore2-Graphene-based disruptive technologies) for financial support. Grants PGC2018-101181-B-I00 and MAT2017-85089-C2-1-R funded by MCIN/AEI/ 10.13039/501100011033 and “ERDF A way of making Europe” by the “European Union”, and grant PID2020-113142RB-C21 funded by MCIN/AEI/ 10.13039/501100 011033 also provided financial support. We also acknowledge Comunidad de Madrid via Programa de Investigación Tecnologías 2018 (FOTOART-CM S2018/NMT-4367), the Swiss National Science Foundation (grant number 200020-182015), the NCCR MARVEL funded by the Swiss National Science Foundation (grant number 51NF40-182892) and FEDER/Junta de Andalucía-Consejería de Economía y Conocimiento (B-FQM-428-UGR20). C. S. S. and N. R. A. acknowledge Grants RYC2018-024364-I and BES-2015-072642, respectively, funded by MCIN/AEI/ 10.13039/501100011033 and “ESF Investing in your future”. I. R. M. acknowledges the University of Granada for her postdoctoral contract (Contrato Puente-Plan Propio UGR). F.V. thanks Ministerio de Universidades for the FPU grant (FPU18/05938)., On-surface synthesis, complementary to wet chemistry, has been demonstrated to be a valid approach for the synthesis of tailored graphenic nanostructures with atomic precision. Among the different existing strategies used to tune the optoelectronic and magnetic properties of these nanostructures, the introduction of non-hexagonal rings inducing out-of-plane distortions is a promising pathway that has been scarcely explored on surfaces. Here, we demonstrate that non-hexagonal rings, in the form of tropone (cycloheptatrienone) moieties, are thermally transformed into phenyl or cyclopentadienone moieties upon an unprecedented surface-mediated retro–Buchner-type reaction involving a decarbonylation or an intramolecular rearrangement of the CO unit, respectively., Junta de Andalucía-Consejería de Economía y Conocimiento B-FQM-428-UGR20, BES-2015-072642, RYC2018-024364-I, MCIN, Ministerio de Universidades FPU18/05938, European Commission FOTOART-CM S2018/NMT-4367, European Research Council, Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung 200020-182015, European Social Fund, Universidad de Granada, European Regional Development Fund 011033, PID2020-113142RB-C21, S2018/NMT-4367, National Center of Competence in Research Materials’ Revolution: Computational Design and Discovery of Novel Materials 51NF40-182892, Agencia Estatal de Investigación
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

A Graphene Field-Effect Transistor Based Analogue Phase Shifter for High-Frequency Applications

  • Medina Rull, Alberto
  • Pasadas Cantos, Francisco
  • González Marín, Enrique
  • Toral López, Alejandro
  • Cuesta-Lopez, Juan
  • Godoy Medina, Andrés|||0000-0002-3014-8765
  • Jiménez, David
  • García Ruiz, Francisco Javier
We present a graphene-based phase shifter for radio-frequency (RF) phase-array applications. The core of the designed phase-shifting system consists of a graphene field-effect transistor (GFET) used in a common source amplifier configuration. The phase of the RF signal is controlled by exploiting the quantum capacitance of graphene and its dependence on the terminal transistor biases. In particular, by independently tuning the applied gate-to-source and drain-to-source biases, we observe that the phase of the signal, in the super-high frequency band, can be varied nearly 200° with a constant gain of 2.5 dB. Additionally, if only the gate bias is used as control signal, and the drain is biased linearly dependent on the former (i.e., in a completely analogue operation), a phase shift of 85° can be achieved making use of just one transistor and keeping a gain of 0 dB with a maximum variation of 1.3 dB. The latter design can be improved by applying a balanced branch-line configuration showing to be competitive against other state-of-the-art phase shifters. This work paves the way towards the exploitation of graphene technology to become the core of active analogue phase shifters for high-frequency operation., Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación (AEI), European Regional Developments Fund (ERDF/FEDER), under Project TEC2017-89955-P and Project EQC2018-004963-P (MINECO/AEI/FEDER), FEDER/Junta de Andalucía-Consejería de Economía y Conocimiento under Project B-RNM-375-UGR18, European Commission through the Horizon 2020 Project Wearable Applications Enabled by Electronic Systems on Paper (WASP) under Contract 825213, Juan de la Cierva Incorporación under Grant IJCI-2017-32297 (MINECO/AEI), European Union's Horizon 2020 Research and Innovation Programme under Grant GrapheneCore2 785219 and Grant GrapheneCore3 881603, Ministerio de Ciencia, Innovación y Universidades under Grant RTI2018-097876-B-C21(MCIU/AEI/FEDER, UE), European Regional Development Funds (ERDF) through the Programa Operatiu FEDER de Catalunya 2014-2020, with the support of the Secretaria d'Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya, GraphCAT under Project 001-P-001702
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Dielectric-Doped 2D Tellurium Diodes for Zero-Bias Radio Frequency Power Detection

  • Palacios, Paula
  • Askar, Abdelrahman M.
  • Pasadas Cantos, Francisco
  • Saeed, Mohamed
  • González Marín, Enrique
  • Adachi, Michael M.
  • Negra, Renato
This work presents a 2D tellurium (Te)-based diode that exploits the doping achieved by atomic layer deposited (ALD) Al2O3 to enhance its rectifying performance. The proposed device comprises a Schottky junction that is dielectric-doped to significantly reduce the reverse bias current. A boosted current responsivity four times higher compared to that of undoped devices is achieved, maximizing the performance for radio frequency (RF) power detectors. The application measurement results demonstrate sensitivities as low as −45 dBm, and at −30 dBm RF input power outstanding tangential responsivities up to 6.5 kV W–1, 4.3 kV W–1, and 650 V W–1 at 0.5, 1, and 2.5 GHz, respectively, while reaching linear dynamic range (DR) of over 30 dB. These are the highest reported values for 2D-based material devices by almost two orders of magnitude. Furthermore, the DR is ≈10 dB larger compared to state-of-the-art power detectors based on bulk semiconductors., German Research Foundation (DFG) under the projects GLECS2 (No. 653408), MOSTFLEX (653414), Natural Sciences and Engineering Research Council of Canada (NSERC) (RGPIN-2017-05810 and ALLRP 577611-22), European Commission under the Horizon 2020 projects Graphene Flagship (No. 785219 and 881603), Research projects TED2021-129938B-I00 FlexPowHar and CNS2023-143727 RECAMBIO both funded by MCIN/AEI/10.13039/501100-011033 and the European Union NextGenerationEU/PRTR, R+D+i project A-ING-253-UGR23 AMBITIONS co-financed by Consejería de Universidad, Investigación e Innovación and the European Union under the FEDER Andalucía 2021-2027, Vanier Canada Graduate Scholarship, Simon Fraser University
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Multi-scale analysis of radio-frequency performance of 2D-material based field-effect transistors

  • Toral López, Alejandro
  • González Marín, Enrique
  • Medina Rull, Alberto
  • García Ruiz, Francisco Javier
  • Godoy Medina, Andrés|||0000-0002-3014-8765
A. Toral-Lopez acknowledges the FPU program (FPU16/04043). E. G. Marin acknowledges Juan de la Cierva Incorporación IJCI-2017-32297 (MINECO/AEI). This work has received funding from the European Unions Horizon 2020 Research and Innovation Programme under grant agreements No. GrapheneCore2 785219 and No. GrapheneCore3 881603, and from Ministerio de Ciencia, Innovación y Universidades under grant agreement RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), TEC2017- 89955-P (MINECO/AEI/FEDER, UE), and TEC2015-67462-C2-1- R (MINECO). This article has been partially funded by the European Regional Development Funds (ERDF) allocated to the Programa Operatiu FEDER de Catalunya 2014–2020, with support of the Secretaria d’Universitats i Recerca of the Departament d’Empresa i Coneixement of the Generalitat de Catalunya for Emerging Technology Clusters to carry out valorization and transfer of research results. GraphCAT project 001-P-001702., Two-dimensional materials (2DMs) are a promising alternative to complement and upgrade high-frequency electronics. However, in order to boost their adoption, the availability of numerical tools and physically-based models able to support the experimental activities and to provide them with useful guidelines becomes essential. In this context, we propose a theoretical approach that combines numerical simulations and small-signal modeling to analyze 2DM-based FETs for radio-frequency applications. This multi-scale scheme takes into account non-idealities, such as interface traps, carrier velocity saturation, or short channel effects, by means of self-consistent physics-based numerical calculations that later feed the circuit level via a small-signal model based on the dynamic intrinsic capacitances of the device. At the circuit stage, the possibilities range from the evaluation of the performance of a single device to the design of complex circuits combining multiple transistors. In this work, we validate our scheme against experimental results and exemplify its use and capability assessing the impact of the channel scaling on the performance of MoS2-based FETs targeting RF applications., FPU program (FPU16/04043), Juan de la Cierva Incorporación IJCI-2017-32297 (MINECO/AEI), European Unions Horizon 2020 Research and Innovation Programme under grant agreements No. GrapheneCore2 785219 and No. GrapheneCore3 881603, Ministerio de Ciencia, Innovación y Universidades under grant agreement RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), TEC2017- 89955-P (MINECO/AEI/FEDER, UE), and TEC2015-67462-C2-1- R (MINECO), European Regional Development Funds (ERDF) allocated to the Programa Operatiu FEDER de Catalunya 2014–2020, with support of the Secretaria d’Universitats i Recerca of the Departament d’Empresa i Coneixement of the Generalitat de Catalunya for Emerging Technology Clusters, GraphCAT project 001-P-001702
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publication Artículo científico (JournalArticle)

An improved descriptor of cluster stability: application to small carbon clusters

  • Alonso Martín, Julio Alfonso
  • Martínez, Jose Luís
Producción Científica, The mass spectra of gas-phase clusters in cluster beams have a rich structure where the relative heights of the peaks compared to peaks corresponding to clusters of neighbor sizes reveal the stability of the clusters as a function of the size N. In an analysis of the published mass spectrum of carbon clusters cations C + N with N ≤16 we have employed the most common descriptor of cluster stability, which is based on comparing the total energy of the cluster of size N with the averaged energies of clusters with sizes N+1 and N-1. Those energies have been obtained from density functional calculations. The comparison between the stability function and the mass spectrum leaves some experimental features unexplained; in particular, the correlation with the detailed variation of the height of the mass peaks as a function of size N is not satisfactory. We then propose a novel stability descriptor which improves matters substantially, in particular the correlation with the detailed variation of the height of the mass peaks. The new stability index is based on comparing the atom-evaporation energy of the cluster of size N with the averaged atom-evaporation energies of clusters with sizes N+1 and N-1. The substantial improvement achieved is attributed to the fact that evaporation energies are quantities directly connected with the processes controllig the cluster abundances in the beam., Ministerio de Economía, Industria y Competitividad ( Grants MAT2017-85089-C2-1-R / RYC-2015-17730), Junta de Castilla y Leon (Grant VA021G18), Universidad de Valladolid (Grupo de Física de Nanoestructuras), y Unión Europea a través de ERC-Synergy Program (Grant ERC-2013-SYG610256 NANOCOSMOS)
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Collective All‐Carbon Magnetism in Triangulene Dimers

  • Mishra, Shantanu
  • Beyer, Doreen
  • Eimre, Kristjan
  • Ortiz-Cano, Ricardo
  • Fernández-Rossier, Joaquín
  • Berger, Reinhard
  • Gröning, Oliver
  • Pignedoli, Carlo A.
  • Fasel, Roman
  • Feng, Xinliang
  • Ruffieux, Pascal
  • Fernández-Rossier, Joaquín|||/items/5d31f6dc-0ceb-4dec-8e06-baa8d84acde4
Triangular zigzag nanographenes, such as triangulene and its π‐extended homologues, have received widespread attention as organic nanomagnets for molecular spintronics, and may serve as building blocks for high‐spin networks with long‐range magnetic order, which are of immense fundamental and technological relevance. As a first step towards these lines, we present the on‐surface synthesis and a proof‐of‐principle experimental study of magnetism in covalently bonded triangulene dimers. On‐surface reactions of rationally designed precursor molecules on Au(111) lead to the selective formation of triangulene dimers in which the triangulene units are either directly connected through their minority sublattice atoms, or are separated via a 1,4‐phenylene spacer. The chemical structures of the dimers have been characterized by bond‐resolved scanning tunneling microscopy. Scanning tunneling spectroscopy and inelastic electron tunneling spectroscopy measurements reveal collective singlet–triplet spin excitations in the dimers, demonstrating efficient intertriangulene magnetic coupling.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Ultra-broad spectral photo-response in FePS3 air-stable devices

  • Ramos, Maria
  • Carrascoso, Felix
  • Frisenda, Riccardo
  • Gant, Patricia
  • Mañas-Valero, Samuel
  • Esteras, Dorye L.
  • Baldoví, José J.
  • Coronado, Eugenio
  • Castellanos-Gomez, Andres
  • Calvo, M. Reyes
Van der Waals materials with narrow energy gaps and efficient response over a broadband optical spectral range are key to widen the energy window of nanoscale optoelectronic devices. Here, we characterize FePS3 as an appealing narrow-gap p-type semiconductor with an efficient broadband photo-response, a high refractive index, and a remarkable resilience against air and light exposure. To enable fast prototyping, we provide a straightforward guideline to determine the thickness of few-layered FePS3 nanosheets extracted from the optical transmission characteristics of several flakes. The analysis of the electrical photo-response of FePS3 devices as a function of the excitation energy confirms a narrow gap suitable for near IR detection (1.23 eV) and, more interestingly, reveals a broad spectral responsivity up to the ultraviolet region. The experimental estimate for the gap energy is corroborated by ab-initio calculations. An analysis of photocurrent as a function of gate voltage and incident power reveals a photo-response dominated by photogating effects. Finally, aging studies of FePS3 nanosheets under ambient conditions show a limited reactivity of the outermost layers of flakes in long exposures to air.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Large magnetic exchange coupling in rhombus-shaped nanographenes with zigzag periphery

  • Mishra, Shantanu
  • Yao, Xuelin
  • Chen, Qiang
  • Eimre, Kristjan
  • Gröning, Oliver
  • Ortiz-Cano, Ricardo
  • Di Giovannantonio, Marco
  • Sancho-Garcia, Juan-Carlos
  • Fernández-Rossier, Joaquín
  • Pignedoli, Carlo A.
  • Müllen, Klaus
  • Ruffieux, Pascal
  • Narita, Akimitsu
  • Fasel, Roman
  • Fernández-Rossier, Joaquín|||/items/5d31f6dc-0ceb-4dec-8e06-baa8d84acde4
  • Sancho-Garcia, Juan-Carlos|||/items/c44aeec1-46c2-4d49-af1e-c8f274485704
Nanographenes with zigzag edges are predicted to manifest non-trivial π-magnetism resulting from the interplay of concurrent electronic effects, such as hybridization of localized frontier states and Coulomb repulsion between valence electrons. This provides a chemically tunable platform to explore quantum magnetism at the nanoscale and opens avenues towards organic spintronics. The magnetic stability in nanographenes is thus far greatly limited by the weak magnetic exchange coupling, which remains below the room-temperature thermal energy. Here, we report the synthesis of large rhombus-shaped nanographenes with zigzag peripheries on gold and copper surfaces. Single-molecule scanning probe measurements show an emergent magnetic spin singlet ground state with increasing nanographene size. The magnetic exchange coupling in the largest nanographene (C70H22, containing five benzenoid rings along each edge), determined by inelastic electron tunnelling spectroscopy, exceeds 100 meV or 1,160 K, which outclasses most inorganic nanomaterials and survives on a metal electrode.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Bidirectional Modulation of Neuronal Cells Electrical and Mechanical Properties Through Pristine and Functionalized Graphene Substrates

  • Zummo, Francesca
  • Esposito, Pietro
  • Hou, Huilei
  • Wetzl, Cecilia
  • Rius, Gemma
  • Tkatchenko, Raphaela
  • Guimerà, Anton
  • Godignon, Philippe
  • Prato, Maurizio
  • Prats Alfonso, Elisabet
  • Criado, Alejandro
  • Scaini, Denis
[Abstract] In recent years, the quest for surface modifications to promote neuronal cell interfacing and modulation has risen. This course is justified by the requirements of emerging technological and medical approaches attempting to effectively interact with central nervous system cells, as in the case of brain-machine interfaces or neuroprosthetic. In that regard, the remarkable cytocompatibility and ease of chemical functionalization characterizing surface-immobilized graphene-based nanomaterials (GBNs) make them increasingly appealing for these purposes. Here, we compared the (morpho)mechanical and functional adaptation of rat primary hippocampal neurons when interfaced with surfaces covered with pristine single-layer graphene (pSLG) and phenylacetic acid-functionalized single-layer graphene (fSLG). Our results confirmed the intrinsic ability of glass-supported single-layer graphene to boost neuronal activity highlighting, conversely, the downturn inducible by the surface insertion of phenylacetic acid moieties. fSLG-interfaced neurons showed a significant reduction in spontaneous postsynaptic currents (PSCs), coupled to reduced cell stiffness and altered focal adhesion organization compared to control samples. Overall, we have here demonstrated that graphene substrates, both pristine and functionalized, could be alternatively used to intrinsically promote or depress neuronal activity in primary hippocampal cultures., This work was funded by the European Union’s Horizon 2020 Research and Innovation Program under the Grant Agreements 785219 and 881603 of the Graphene Flagship. DS acknowledges the support of the European Union’s Horizon 2020 Research and Innovation Program under the Marie Skłodowska-Curie grant agreement no. 838902. MP as the recipient of the AXA Bionanotechnology Chair, is grateful to the AXA Research Fund for financial support. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency-grant no. MDM-2017- 0720. AC thanks Xunta de Galicia for his research grant Atracción de Talento (no. ED431H 2020/17). GR acknowledges funding from RYC-2016-21412. HH acknowledges funding from Juan de la Cierva – Incorporación no. IJC-2018-037396-I, Xunta de Galicia; ED431H 2020/17
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Mass Spectrometry of Carbohydrate-Protein Interactions on a Glycan Array Conjugated to CVD Graphene Surfaces

  • Merino, Juan P.
  • Serna, Sonia
  • Criado, Alejandro
  • Centeno, Alba
  • Napal, Ilargi
  • Calvo, Javier
  • Zurutuza, Amaia
  • Reichardt, Niels-Christian
  • Prato, Maurizio
[Abstract]: Mass spectrometry (MS) is a valuable tool for functional genomic, proteomic, and glycomic studies. In particular, the combination of MS with microarrays is a powerful technique for analyzing the activity of carbohydrate processing enzymes and for the identification of car-bohydrate-binding proteins (lectins) in complex matrices. On the other hand, graphene exhi-bits high desorption/ionization efficiency, good conductivity and optical transparency, specifi-cations of a high-performance component for matrix-assisted laser desorption/ionization (MALDI) platforms. Besides, the chemical functionalization of graphene increases the adsor-ption capability of functional biomolecules (e.g. receptors), resulting in very stable interfaces. Taking advantage of the properties of graphene, we developed several modified chemical vapor deposited graphene (CVDG)-based glycan arrays on different substrates including ITO and bare glass, as a potential sensing platform for carbohydrate-lectin interactions, which are involved in a plethora of biological processes. The glycan arrays were fully characterized by MALDI-MS analysis and, in some cases, optical microscopy., M Prato is the recipient of the AXA Chair (2016-2023). A Criado thanks MINECO to his research grant (Juan de la Cierva—Incorporación). This work was supported by the European Union’s Horizon 2020 research and innovation program under Grant Agreements 696656 and 785219 Graphene Flagship. Funding from the Spanish Ministry of Economy, Industry and Competitiveness (project CTQ2016-76721-R to M Prato and Grant CTQ2017-90039-R to N-C Reichardt) is acknowledged. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—Grant No. MDM-2017-0720.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

High-Yield Preparation of Exfoliated 1T-MoS2 with SERS Activity

  • Er, Engin
  • Hou, Huilei
  • Criado, Alejandro
  • Langer, Judith
  • Möller, Marco
  • Erk, Nevin
  • Liz-Marzán, Luis
  • Prato, Maurizio
[Abstract]: Molybdenum disulfide (MoS2), a promising two-dimensional transition-metal dichalcogenide, presents a challenge in the tuning of its optoelectronic and chemical properties. Herein, we demonstrate an efficient route to alter the crystalline structure of MoS2 by chemical exfoliation. Using NaK metal alloys, exfoliated and covalently functionalized MoS2 derivatives were obtained with a high metallic (1T) phase ratio, up to 94.5%. Consequently, exfoliated MoS2 showed a significant surface-enhanced Raman scat-tering activity toward rhodamine 6G (R6G) and crystal violet, with low detection limits. The versatility of this approach allows the covalent functionalization of MoS2 without relying on edge or basal-plane defects of the structure and preserving the high-ratio 1T phase., M.P. is the recipient of the AXA Chair (2016−2023). A.C. thanks MINECO for his researcher grant (Juan de la Cierva-Incorporación). E.E. is grateful for a fellowship from the Scientific and Technological Research Council of Turkey (TUBITAK). This work was supported by the Graphene Flagship Core 2 grant agreement no. 785219. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency-grant no. MDM-2017-0720.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Concise, Single-Step Synthesis of Sulfur-Enriched Graphene: Immobilization of Molecular Clusters and Battery Applications

  • Omachi, Haruka
  • Inoue, Tsukasa
  • Hatao, Shuya
  • Shinohara, Hisanori
  • Criado, Alejandro
  • Yoshikawa, Hirofumi
  • Syrgiannis, Zois
  • Prato, Maurizio
[Abstract]: The concise synthesis of sulfur-enriched Graphene for battery applications is reported. The direct treatment of graphene oxide (GO) with the commercially available Lawesson’s reagent produced sulfur-enriched-reduced GO (S-rGO). Various techniques, such as X-ray photoelectron spectroscopy (XPS), confirmed the occurrence of both sulfur functionalization and GO reduction. Also fabricated was a nanohybrid material by using S-rGO with polyoxometalate (POM) as a cathode-active material for a rechargeable battery. Transmission electron microscopy (TEM) revealed that POM clusters were individually immobilized on the S-rGO surface. This battery, based on a POM/S-rGO complex, exhibited greater cycling stability for the charge-discharge process tan a battery with nanohybrid materials positioned between the POM and nonenriched rGO. These results demonstrate that the use of sulfur-containing groups on a graphene surface can be extended to applications such as the catalysis of electrochemical reactions and electrodes in other battery systems., This work was financially supported by MEXT/JSPS KAKENHI (15K21073, 19K15539 to H.O., 16H06350, 16H02248 to H.S. and 18H04528, 17H03048, 18H04491 to H.Y.) and in part by research grants from Nippon Shokubai Co. Ltd., Kondo Zaidan, JGC-S Scholarship Foundation. We acknowledged financial support from the European Union’s Horizon2020 research and innovation program under Grant Agreements 696656 and 785219 Graphene Flagship. This work was also supported by the Spanish Ministry of Economy and Competitiveness MINECO (projects IJCI-2016-31113), by the University of Trieste, and Consorzio Interuniversitario Nazionale per la Scienza e Tecnologia dei Materiali (INSTM). MP, as the recipient of the AXA Chair, is grateful to the AXA Research Fund for financial support. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—Grant No. MDM-2017-0720. We also thank Prof. Yuta Nishina (Okayama University) for providing graphene oxide samples., MEXT/JSPS KAKENHI; 15K21073, MEXT/JSPS KAKENHI; 19K15539, MEXT/JSPS KAKENHI; 16H06350, MEXT/JSPS KAKENHI; 16H02248, MEXT/JSPS KAKENHI; 18H04528, MEXT/JSPS KAKENHI; 17H03048, MEXT/JSPS KAKENHI; 18H04491
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

The Reactivity of Reduced Graphene Depends on Solvation

  • Hou, Huilei
  • Merino, Juan P.
  • Criado, Alejandro
  • Hirsch, Andreas
  • Prato, Maurizio
[Abstract] The reactivity of reduced graphene sheets (graphenide), obtained by dissolution of graphite intercalation compounds, in particular KC8, was systemically studied by cova-lent functionalization with 4-fluorobenzenediazonium tetrafluoroborate and 4-iodoaniline in different solvents (5 pure and 7 solvents with addition of K+ chelating agents). Interestingly, proper solvation of the potassium cations was beneficial to the covalent functionalization, while excessive solvation led to destabilization and floccula-tion, with decreased reactivity of graphenide. The results were confirmed by scanning Raman spectroscopy (SRS) and x-ray photoelectron spectroscopy (XPS)., M Prato is the recipient of the AXA Chair (2016–2023). A Criado thanks MINECO for his researcher grant (Juan de la Cierva—Incorporación). This work was supported by the EU H2020-SGA-FET-GRAPHENE-2017 (no. 785219) and EU H2020-MSCA-RISE-2016 (no. 734381).
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Ethanol Solvation of Polymer Residues in Graphene Solution-Gated Field Effect Transistors

  • Merino, Juan P.
  • Vázquez Sulleiro, Manuel
  • Criado, Alejandro
  • Prato, Maurizio
  • Prats Alfonso, Elisabet
[Abstract] The persistence of photoresist residues from microfabrication procedures causes significant obstacles in the technological advancement of graphene-based electronic devices. These residues induce undesired chemical doping effects, diminish carrier mobility, and deteriorate the signal-to-noise ratio, making them critical in certain contexts, including sensing and electrical recording applications. In graphene solution-gated field-effect transistors (gSGFETs), the presence of polymer contaminants makes it difficult to perform precise electrical measurements, introducing response variability and calibration challenges. Given the absence of viable short to midterm alternatives to polymer-intensive microfabrication techniques, a postpatterning treatment involving THF and ethanol solvents was evaluated, with ethanol being the most effective, environmentally sustainable, and safe method for residue removal. Employing a comprehensive analysis with XPS, AFM, and Raman spectroscopy, together with electrical characterization, we investigated the influence of residual polymers on graphene surface properties and transistor functionality. Ethanol treatment exhibited a pronounced enhancement in gSGFET performance, as evidenced by a shift in the charge neutrality point and reduced dispersion. This systematic cleaning methodology holds the potential to improve the reproducibility and precision in the manufacturing of graphene devices. Particularly, by using ethanol for residue removal, we align our methodology with the principles of green chemistry, minimizing environmental impact while advancing diverse graphene technology applications., This work has made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MICINN and the ICTS NANBIOSIS, more specifically by the Micro-NanoTechnology Unit U8 of the CIBER-BBN. This research was funded by the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 881603 (GrapheneCore3) and No. 785219 (GrapheneCore2). We also acknowledge funding from the Generalitat de Catalunya (2021SGR00495 and 2021SGR001534). G.R. thanks the Ayuda RYC-2016-21412, and E.dC thanks the Ayuda RYC2019-027879-I founded by MCIU/AEI/10.13039/501100011033 and by El FSE invierte en tu futuro. E.M.-C. acknowledges Ayuda FJC2021-046601-I financiada por MCIU/AEI/10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR. This research was funded by the Spanish Ministerio de Ciencia e Innovación (PID2021-126117NA-I00, PID2020-113663RB-I00, PLEC2022-009232) founded by MCIU/AEI/10.13039/501100011033) and by “ERDF A way of making Europe”, also this work was funded by CIBER-BBN (CB06/01/0049). In addition, this work has been funded by PLEC2022-009232 funded by MCIU/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. The authors acknowledge the financial support provided by CIBER-BBN and the Instituto de Salud Carlos III with assistance from the European Regional Development. M.V.S. thanks Xunta de Galicia (ED481B-2023-126). A.C. acknowledges financial support by Grant ED431H 2020/17 funded by Xunta de Galicia, and by Grant RYC2020-030183-I funded by MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future”. Part of this work was performed under the Maria de Maeztu Units of Excellence Program grant MDM-2017-0720 funded by MCIN/AEI/10.13039/501100011033 and supported by the Severo Ochoa Centres of Excellence programme [SEV-2017-0706] and is currently supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, both funded by MCIN and MCIU/AEI/10.13039.501100011033. M.P. as recipient of the AXA Chair is grateful to AXA Chair in Nanobiotechnology supported by the AXA Research Fund., Generalitat de Catalunya; 2021SGR00495, Generalitat de Catalunya; 2021SGR001534, Xunta de Galicia; ED481B-2023-126, Xunta de Galicia; ED431H 2020/17
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Covalent functionalisation controlled by molecular design for the aptameric recognition of serotonin in graphene-based field-effect transistors

  • Wetzl, Cecilia
  • Brosel, Sergi
  • Carini, Marco
  • Di Silvio, Desiré
  • Illa, Xavi
  • Villa, Rosa
  • Guimerà, Anton
  • Prats Alfonso, Elisabet
  • Prato, Maurizio
  • Criado, Alejandro
[Abastract]: In the last decade, solution-gated graphene field effect transistors (GFETs) showed their versatility in the development of a miniaturized multiplexed platform for electrophysiological recordings and sensing. Due to their working mechanism, the surface functionalisation and immobilisation of receptors are pivotal to ensure the proper functioning of devices. Herein, we present a controlled covalent functionalisation strategy based on molecular design and electrochemical triggering, which provide a monolayer-like functionalisation of micro-GFET arrays retaining the electronic properties of graphenes. The functionalisation layer as a receptor was then employed as the linker for serotonin aptamer conjugation. The micro-GFET arrays display sensitivity toward the target analyte in the micromolar range in a physiological buffer (PBS 10 mM). The sensor allows the in-flow real-time monitoring of serotonin transient concentrations with fast and reversible responses., This work has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 881603 (GrapheneCore3) and no. 785219 (GrapheneCore2). M. P. is AXA Professor and is supported by the European Research Council (ERC-AdG-2019, no. 885323), the Agencia Estatal de Investigación-AEI (“Proyectos I+D+i 2019-Modalidad Retos Investigación”, no. PID2019-108523RB-I00), by grant PRE2020-095099 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future.” Part of this work has made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MICINN and the ICTS NANBIOSIS, more specifically by the Micro-NanoTechnology Unit U8 of the CIBER-BBN. This project was also funded by the Generalitat de Catalunya (2021SGR00495), by the Spanish Ministerio de Ciencia e Innovación (PID2021-126117NA-I00), by “ERDF A way of making Europe”, and by CIBER-BBN (CB06/01/0049). X. I., R. V., A. G. and E. P.-A. thank the financial support provided by CIBER-BBN and the Instituto de Salud Carlos III with assistance from the European Regional Development. A. C. acknowledges financial support by Grant ED431H 2020/17 funded by Xunta de Galicia, and by Grant RYC2020-030183-I funded by MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future”., Generalitat de Catalunya; 2021SGR00495, Xunta de Galicia; ED431H 2020/17
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Electrochemically Controlled Cleavage of Imine Bonds on a Graphene Platform: Towards New Electro-Responsive Hybrids for Drug Release

  • Hou, Huilei
  • Cardo, Lucia
  • Mancino, Donato
  • Arnaiz, Blanca
  • Criado, Alejandro
  • Prato, Maurizio
[Abstract] Graphene-based materials are particularly suitable platforms for the development of new systems able to release drugs upon the application of controlled electrochemical stimuli. Herein, we report a new electro-responsive graphene carrier functionalised with aldehydes (as drug models) through imine-based linkers. We explore a new type of drug loading/release combination based on the formation of a covalent bond and its cleavage upon electrolysis. The new graphene–drug model hybrid is stable under physiological conditions and displays a fast drug release upon the application of low voltages., M. Prato is the recipient of the AXA Chair (2016–2023). A. Criado, H.-L. Hou and D. Mancino thank MINECO for their research grants (Juan de la Cierva – Incorporación No. IJCI-2016-31113 and IJC-2018-037396 for A. Criado and H.-L. Hou, respectively; and FPI No. BES-2017-081563 for D. Mancino). This work was supported by the Graphene Flagship Core 2 and Core 3 grant agreement (No. 785219 and 881603, respectively) and EU H2020-MSCA-RISE-2016 (No. 734381). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency – Grant No. MDM-2017-0720.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Single-Step Functionalization Strategy of Graphene Microtransistor Array with Chemically Modified Aptamers for Biosensing Applications

  • Brosel, Sergi
  • Rius, Gemma
  • Aviñó, Ana
  • Nako, Nakatsuka
  • Illa, Xavi
  • Corro, Elena del
  • Delgà-Fernández, Marta
  • Criado, Alejandro
  • Guimerà, Anton
  • Prats Alfonso, Elisabet
[Abstract]: Graphene solution-gated field-effect transistors (gSGFETs) offer high potential for chemical and biochemical sensing applications. Among the current trends to improve this technology, the functionalization processes are gaining relevance for its crucial impact on biosensing performance. Previous efforts are focused on simplifying the attachment procedure from standard multi-step to single-step strategies, but they still suffer from overreaction, and impurity issues and are limited to a particular ligand. Herein, a novel strategy for single-step immobilization of chemically modified aptamers with fluorenylmethyl and acridine moieties, based on a straightforward synthetic route to overcome the aforementioned limitations is presented. This approach is benchmarked versus a standard multi-step strategy using thrombin as detection model. In order to assess the reliability of the functionalization strategies 48-gSGFETs arrays are employed to acquire large datasets with multiple replicas. Graphene surface characterization demonstrates robust and higher efficiency in the chemical coupling of the aptamers with the single-step strategy, while the electrical response evaluation validates the sensing capability, allowing to implement different alternatives for data analysis and reduce the sensing variability. In this work, a new tool capable of overcome the functionalization challenges of graphene surfaces is provided, paving the way toward the standardization of gSGFETs for biosensing purposes., This work has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 881603 (GrapheneCore3) and no. 785219 (GrapheneCore2). M. P. is AXA Professor and is supported by the European Research Council (ERC-AdG-2019, no. 885323), the Agencia Estatal de Investigación-AEI (“Proyectos I+D+i 2019-Modalidad Retos Investigación”, no. PID2019-108523RB-I00), by grant PRE2020-095099 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future.” Part of this work has made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MICINN and the ICTS NANBIOSIS, more specifically by the Micro-NanoTechnology Unit U8 of the CIBER-BBN. This project was also funded by the Generalitat de Catalunya (2021SGR00495), by the Spanish Ministerio de Ciencia e Innovación (PID2021-126117NA-I00), by “ERDF A way of making Europe”, and by CIBER-BBN (CB06/01/0049). X. I., R. V., A. G. and E. P.-A. thank the financial support provided by CIBER-BBN and the Instituto de Salud Carlos III with assistance from the European Regional Development. A. C. acknowledges financial support by Grant ED431H 2020/17 funded by Xunta de Galicia, and by Grant RYC2020-030183-I funded by MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future”., Generalitat de Catalunya; 2021SGR00495
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Electrostatic effects, band distortions, and superconductivity in twisted graphene bilayers

Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Thickness-dependent differential reflectance spectra of monolayer and few-layer MoS2, MoSe2, WS2 and WSe2

  • Niu Y.
  • Gonzalez-Abad S.
  • Frisenda R.
  • Marauhn P.
  • Drüppel M.
  • Gant P.
  • Schmidt R.
  • Taghavi N.S.
  • Barcons D.
  • Molina-Mendoza A.J.
  • de Vasconcellos S.M.
  • Bratschitsch R.
  • De Lara D.P.
  • Rohlfing M.
  • Castellanos-Gomez A.
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

A strain tunable single-layer MoS2 photodetector

Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Anomalously low dielectric constant of confined water

  • Fumagalli, Laura, 1959-
  • Esfandiar, Ali
  • Fabregas, Rene
  • Hu, S.
  • Ares, Pablo
  • Janardanan, Amritha
  • Yang, Q.
  • Radha, Boya
  • Taniguchi, Takashi
  • Watanabe, K.
  • Gomila Lluch, Gabriel
  • Novoselov, K. S.
  • Geim, A. K.
The dielectric constant ε of interfacial water has been predicted to be smaller than that of bulk water (ε ≈ 80) because the rotational freedom of water dipoles is expected to decrease near surfaces, yet experimental evidence is lacking. We report local capacitance measurements for water confined between two atomically flat walls separated by various distances down to 1 nanometer. Our experiments reveal the presence of an interfacial layer with vanishingly small polarization such that its out-of-plane ε is only ~2. The electrically dead layer is found to be two to three molecules thick. These results provide much-needed feedback for theories describing water-mediated surface interactions and the behavior of interfacial water, and show a way to investigate the dielectric properties of other fluids and solids under extreme confinement.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct Synthesis of Graphene on Silicon Oxide by low temperature Plasma Enhanced Chemical Vapor Deposition

  • Muñoz, Roberto
  • Martínez Orellana, Lidia
  • López-Elvira, Elena
  • Munuera, C.
  • Huttel, Yves
  • García-Hernández, Mar
Direct graphene growth on silicon with native oxide using Plasma enhanced Chemical Vapour Deposition at low temperatures [550 ºC -650 ºC] is demonstrated for the first time. It is shown that fine tuning of a two step synthesis with gas mixtures C2H2/H2 yield monolayer and few layer graphene films with controllable domain size from 50 nm to more than 300 nm and sheet resistance ranging from 8 kΩ·sq-1 to less than 1.8 kΩ·sq-1 . Differences are understood in terms of the interaction of the plasma species -chiefly atomic H- with the deposited graphene and the native oxide layer. The proposed low temperature direct synthesis on an insulating substrate does not require any transfer processes and improves compatibility with current industrial processes., Program in Sciences. ERC-synergy program funding (grant ERC-2013-SYG-610256 Nanocosmos), Spanish MINECO MAT2014-59772-C2-2-P funding and EU Graphene Flagship funding (Grant Graphene Core2 785219) are acknowledged. C. M. acknowledges the financial support by the ‘Ramón y Cajal’ Program of MINECO (RYC-2014-16626)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On‐Surface Bottom‐Up Synthesis of Azine Derivatives Displaying Strong Acceptor Behavior

  • Ruiz del Árbol, Nerea
  • Palacio, Irene
  • Otero, Gonzalo
  • Martínez, José I.
  • Andrés, Pedro L. de
  • Stetsovych, Oleksander
  • Moro-Lagares, María
  • Mutombo, Pingo
  • Švec, Martin
  • Jelinek, Pavel
  • Cossaro, Albano
  • Floreano, Luca
  • Ellis, Gary James
  • López, María Francisca
  • Martín-Gago, José A.
On‐surface synthesis is an emerging approach to obtain, in a single step, precisely defined chemical species that cannot be obtained by other synthetic routes. The control of the electronic structure of organic/metal interfaces is crucial for defining the performance of many optoelectronic devices. A facile on‐surface chemistry route has now been used to synthesize the strong electron‐acceptor organic molecule quinoneazine directly on a Cu(110) surface, via thermally activated covalent coupling of para‐aminophenol precursors. The mechanism is described using a combination of in situ surface characterization techniques and theoretical methods. Owing to a strong surface‐molecule interaction, the quinoneazine molecule accommodates 1.2 electrons at its carbonyl ends, inducing an intramolecular charge redistribution and leading to partial conjugation of the rings, conferring azo‐character at the nitrogen sites., Graphene Flagship Core2‐Graphene‐based disruptive technologies EU Horizon 2020 (785219), ERC‐synergy program (ERC‐2013‐SYG‐610256 Nanocosmos), CTI‐CSIC and Spanish MINECO (grants MAT2017‐85089‐C2‐1‐R, MAT2014‐54231‐C4‐1‐P, and MAT2014‐54231‐C4‐4‐P) are acknowledged. We are grateful to the Czech GACR funding (grant 17‐24210Y) and LM2015087, Czech Academy of Sciences through the Praemium Academiae award and FCT program (IF/01054/2015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thickness-Dependent Differential Reflectance Spectra of Monolayer and Few-Layer MoS2, MoSe2, WS2 and WSe2

  • Niu, Yue
  • González Abad, Sergio
  • Frisenda, Riccardo
  • Marauhn, Philipp
  • Drüppel, Matthias
  • Gant, Patricia
  • Schmidt, Robert
  • Taghavi, Najme S.
  • Barcons, David
  • Molina-Mendoza, Aday J.
  • Vasconcellos, Steffen Michaelis de
  • Bratschitsch, Rudolf
  • Pérez de Lara, David
  • Rohlfing, Michael
  • Castellanos-Gómez, Andrés
This article belongs to the Special Issue Low Dimensional Materials for Environmental and Biomedical Applications., The research field of two dimensional (2D) materials strongly relies on optical microscopy characterization tools to identify atomically thin materials and to determine their number of layers. Moreover, optical microscopy-based techniques opened the door to study the optical properties of these nanomaterials. We presented a comprehensive study of the differential reflectance spectra of 2D semiconducting transition metal dichalcogenides (TMDCs), MoS2, MoSe2, WS2, and WSe2, with thickness ranging from one layer up to six layers. We analyzed the thickness-dependent energy of the different excitonic features, indicating the change in the band structure of the different TMDC materials with the number of layers. Our work provided a route to employ differential reflectance spectroscopy for determining the number of layers of MoS2, MoSe2, WS2, and WSe2., This project received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research, innovation programme (grant agreement No. 755655, ERC-StG 2017 project 2D-TOPSENSE), the EU Graphene Flagship funding (Grant Graphene Core 2, 785219), the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515, the MINECO (program FIS2015-67367-C2-1-P), and the China Scholarship Council (File NO. 201506120102).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interfacing transition metal dichalcogenides with carbon nanodots for managing photoinduced energy and chargetransfer processes

  • Vallan, Lorenzo
  • Canton-Vitoria, Rubén
  • Gobeze, Habtom B.
  • Jang, Youngwoo
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Souza, Francis d'
  • Tagmatarchis, Nikos
Exfoliated semiconducting MoS2 and WS2 were covalently functionalized with 1,2-dithiolane-modified carbon nanodots (CNDs). The newly synthesized CND-MoS2 and CND-WS2 hybrids were characterized by spectroscopic, thermal and electron microscopy imaging methods. Based on electronic absorption and fluorescence emission spectroscopy, modulation of the optoelectronic properties of TMDs by interfacing with CNDs was accomplished. Electrochemical studies revealed facile oxidation of MoS2 over WS2 in the examined hybrids, suggesting it to be better electron donor. Excited state events, investigated by femtosecond transient absorption spectroscopic studies, revealed ultrafast energy transfer from photoexcited CNDs to both MoS2 and WS2. Interestingly, upon MoS2 photoexcitation charge transfer from an exciton dissociation path of MoS2 to CNDs, within CNDMoS2, was observed. However, such process in CND-WS2 was found to be absent due to energetic reasons. The present study highlights the importance of TMD-derived donor-acceptor hybrids in light energy harvesting and optoelectronic applications. Furthermore, the fundamental information obtained from the current results will benefit design strategies and impact the development of additional TMD-based hybrid materials to efficiently manage and perform in electron-transfer processes., This project has received funding from the European Union‘s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, funded by the Operational Programme "Competitiveness, Entrepreneurship and Innovation" co-financed by Greece (Ministry of Economy and Development, NSRF 2014-2020) and EU (European Regional Development Fund) to N. T. and the US-NSF (grant 1401188 to F. D.) is acknowledged. The HR-STEM and STEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R. A. acknowledges support from Spanish MINECO grant MAT2016- 79776-P (AEI/FEDER, UE) and from EU H2020 “Graphene Flagship” grant agreement 785219. W. K. M. and A. M. B. acknowledge Spanish MINECO grant ENE2016-79282-C5-1-R (AEI/FEDER, EU) and the Covernment of Aragon through project DGA-T03_17R (FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural characterization of as-grown and quasi-free standing graphene layers on SiC

  • Aceituno Bueno, Rebeca
  • Palacio, Irene
  • Munuera, C.
  • Aballe, Lucía
  • Foerster, Michael
  • Strupinski, Wlodek
  • García-Hernández, Mar
  • Martín-Gago, José A.
  • López, María Francisca
We report on a comparative structural characterization of two types of high quality epitaxial graphene layers grown by CVD on 4H-SiC(0001). The layers under study are a single layer graphene on top of a buffer layer and a quasi-free-standing graphene obtained by intercalation of hydrogen underneath the buffer layer. We determine the morphology and structure of both layers by different complementary in-situ and ex-situ surface techniques. We found the existence of large islands in both samples but with different size distribution. Photoemission electron microscopy (PEEM) measurements were performed to get information about the chemical environment of the different regions. The study reveals that monolayer graphene prevails in most of the surface terraces, while a bilayer and trilayer graphene presence is observed at the steps, stripes along steps and islands., Financial support from EU Horizon 2020 research and innovation program under grant agreement No. 785219 (Graphene Flagship Core2-Graphene-based disruptive technologies) and Spanish MINECO (grants MAT2017-85089-C2-1-R, MAT2014-52405-C2-2-R, RYC-2014-16626) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

How Au Outperforms Pt in the Catalytic Reduction of Methane Towards Ethane and Molecular Hydrogen

  • Martínez, José I.
  • Calle-Vallejo, Federico
  • Andrés, Pedro L. de
Within the context of a “hydrogen economy”, it is paramount to guarantee a stable supply of molecular hydrogen to devices such as fuel cells. Besides, catalytic conversion of the environmentally harmful methane into ethane, which has a significantly lower Global Warming Potential, is an important endeavour. Herein we propose a novel proof-of-concept mechanism to accomplish both tasks simultaneously. We provide transition-state barriers and reaction Helmholtz free energies obtained from first-principles Density Functional Theory by taking account vibrations for 2CH4(g)→C2H6(g)+H2(g) to show that H2 can be produced by subnanometer Pt38 and Au38 nanoparticles. The active sites for the reaction are located on different planes on the two nanoparticles, thus differentiating the working principle of the two metals. The complete cycle to reduce CH4 can be performed on Au and Pt with similar efficiencies, but Au requires only half the working temperature of Pt. This sizable decrease of temperature can be traced back to several intermediate steps, in excellent agreement with previous experiments, but most crucially to the final one where the catalyst must be cleaned from H(⋆) to be able to restart the catalytic cycle. This highlights the importance of including in catalytic models the final cleaning steps. In addition, this case study provides guidelines to capitalize on finite-size effects for the design of new and more efficient nanoparticle catalysts., This work has been supported by the Spanish MINECO (Grants MAT2014-54231-C4-1-P and MAT2017-85089-C2-1-R), and the EU via the ERC-Synergy Program (Grant ERC-2013-SYG-610256 Nanocosmos) and the EU Graphene Flagship (Grant agreements 696656 Graphene Flagship-core 1 and 785219 Graphene Flagship-core 2). JIM acknowledges funding from Nanocosmos and “Ramón y Cajal” MINECO Program through Grant RYC-2015-17730, and thanks CTI-CSIC for use of computing resources. FC-V thanks “Ramón y Cajal” MINECO Program through Grant RYC-2015-18996., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modelling of adsorption and intercalation of hydrogen on/into tungsten disulphide multilayers and multiwall nanotubes

  • Martínez, José I.
  • Laikhtman, Alexander
  • Moon, Hoi Ri
  • Zak, Alla
  • Alonso, J. A.
Understanding the interaction of hydrogen with layered materials is crucial in the fields of sensors, catalysis, fuel cells and hydrogen storage, among others. Density functional theory, improved by the introduction of van der Waals dispersion forces, provides an efficient and practical workbench to investigate the interaction of molecular and atomic hydrogen with WS2 multilayers and nanotubes. We find that H2 physisorbs on the surface of those materials on top of W atoms, while atomic H chemisorbs on top of S atoms. In the case of nanotubes, the chemisorption strength is sensitive to the nanotube diameter. Diffusion of H2 on the surface of WS2 encounters quite small activation barriers whose magnitude helps to explain previous and new experimental results for the observed dependence of the hydrogen concentration with temperature. Intercalation of H2 between adjacent planar WS2 layers reveals an endothermic character. Intercalating H atoms is energetically favorable, but the intercalation energy does not compensate for the cost of dissociating the molecules. When H2 molecules are intercalated between the walls of a double wall nanotube, the rigid confinement induces the dissociation of the confined molecules. A remarkable result is that the presence of a full H2 monolayer adsorbed on top of the first WS2 layer of a WS2 multilayer system strongly facilitates the intercalation of H2 between WS2 layers underneath. This opens up an additional gate to intercalation processes., This work was supported by the Spanish MINECO (Grants MAT2017-85089-C2-1-R and MAT2014-54378-R), and by the EU via the ERC-Synergy Program (Grant No. ERC-2013-SYG-610256 NANOCOSMOS) and the H2020 Innovation Program (Grant agreements 696656, Graphene Flagship Core 1, and 785219, Graphene Flagship Core 2). J. I. M. also acknowledges support from Ramón y Cajal Program (Grant RYC-2015-17730), as well as computing resources from CTI-CSIC. A. Z. acknowledges financial support from Israel PAZI foundation. The cooperation of A. L. and H. R. M. was supported by the Israel-Korea Renewable Energy grant. A. L. acknowledges European COST action MP1302 “Nanospectroscopy”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polarization‐Sensitive and Broadband Photodetection Based on a Mixed‐Dimensionality TiS3/Si p–n Junction

  • Niu, Yue
  • Frisenda, Riccardo
  • Flores, Fernando
  • Ares, José R.
  • Jiao, Weicheng
  • Pérez de Lara, David
  • Sánchez López, Carlos
  • Wang, Rongguo
  • Ferrer, Isabel J.
  • Castellanos-Gómez, Andrés
The capability to detect the polarization state of light is crucial in many day‐life applications and scientific disciplines. Novel anisotropic 2D materials such as TiS3 combine polarization sensitivity, given by the in‐plane optical anisotropy, with excellent electrical properties. Here, the fabrication of a monolithic polarization‐sensitive broadband photodetector based on a mixed‐dimensionality TiS3/Si p–n junction is demonstrated. The fabricated devices show broadband responsivity up to 1050 nm, a strong sensitivity to linearly polarized illumination with difference between the two orthogonal polarization states up to 350%, and a good detectivity and fast response time. The discussed devices can be used as building blocks to fabricate more complex polarization‐sensitive systems such as polarimeters., The authors acknowledge funding from the EU Graphene Flagship (Grant Graphene Core2 785219) and from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no. 755655, ERC‐StG 2017 project 2D‐TOPSENSE). R.F. acknowledges support from the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680‐50‐1515. D.P.d.L. acknowledges support from the MINECO (program FIS2015‐67367‐C2‐1‐P). Y.N. acknowledges the grant from the China Scholarship Council (File No. 201506120102). W.C.J. acknowledges the Program for the Top Young and Middle‐aged Innovative Talents of Harbin Institute of Technology. MIRE group acknowledges financial support from MINECO‐FEDER (MAT2015‐65203‐R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Revisiting the Buckling Metrology Method to Determine the Young's Modulus of 2D Materials

  • Iguiniz, Nestor
  • Frisenda, Riccardo
  • Bratschitsch, Rudolf
  • Castellanos-Gómez, Andrés
Measuring the mechanical properties of 2D materials is a formidable task. While regular electrical and optical probing techniques are suitable even for atomically thin materials, conventional mechanical tests cannot be directly applied. Therefore, new mechanical testing techniques need to be developed. Up to now, the most widespread approaches require micro‐fabrication to create freely suspended membranes, rendering their implementation complex and costly. Here, a simple yet powerful technique is revisited to measure the mechanical properties of thin films. The buckling metrology method, that does not require the fabrication of freely suspended structures, is used to determine the Young's modulus of several transition metal dichalcogenides (MoS2, MoSe2, WS2, and WSe2) with thicknesses ranging from 2 to 10 layers. The obtained values for the Young's modulus and their uncertainty are critically compared with previously published results, finding that this simple technique provides results which are in good agreement with those reported using other highly sophisticated testing methods. By comparing the cost, complexity, and time required for the different methods reported in the literature, the buckling metrology method presents certain advantages that make it an interesting mechanical test tool for 2D materials., This project received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement n°755655, ERC‐StG 2017 project 2D‐TOPSENSE) and the European Union's Horizon 2020 Graphene Flagship funding (Grant Graphene Core2 785219)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Collective molecular switching in hybrid superlattices for light-modulated two-dimensional electronics

  • Gobbi, Marco
  • Bonacchi, Sara
  • Lian, Jian X.
  • Vercouter, Alexandre
  • Bertolazzi, Simone
  • Zyska, Björn
  • Timpel, Melanie
  • Tatti, Roberta
  • Olivier, Yoann
  • Hecht, Stefan
  • Nardi, Marco V.
  • Beljonne, David
  • Orgiu, Emanuele
  • Samorì, Paolo
Molecular switches enable the fabrication of multifunctional devices in which an electrical output can be modulated by external stimuli. The working mechanism of these devices is often hard to prove, since the molecular switching events are only indirectly confirmed through electrical characterization, without real-space visualization. Here, we show how photochromic molecules self-assembled on graphene and MoS generate atomically precise superlattices in which a light-induced structural reorganization enables precise control over local charge carrier density in high-performance devices. By combining different experimental and theoretical approaches, we achieve exquisite control over events taking place from the molecular level to the device scale. Unique device functionalities are demonstrated, including the use of spatially confined light irradiation to define reversible lateral heterojunctions between areas possessing different doping levels. Molecular assembly and light-induced doping are analogous for graphene and MoS, demonstrating the generality of our approach to optically manipulate the electrical output of multi-responsive hybrid devices., We acknowledge funding from the European Commission through the Graphene Flagship (GA-785219), the Marie Sklodowska-Curie projects ITN project iSwitch (GA-642196) and IEF GALACTIC (PIEF-GA-2014-628563), and SUPER2D (GA-748971), the M-ERA.NET project MODIGLIANI, the Agence Nationale de la Recherche through the Labex projects CSC (ANR-10-LABX-0026 CSC) and NIE (ANR-11-LABX-0058 NIE) within the Investissement d’Avenir program (ANR-10-120 IDEX-0002-02), and the International Center for Frontier Research in Chemistry (icFRC) as well as the German Research Foundation (via SFB 765 and SFB 951). D.B. is a FNRS research director. M.V.N. and M.T. gratefully acknowledge the support by the CARITRO Foundation, (project MILA) Trento (Italy)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Deeply subwavelength phonon-polaritonic crystal made of a van der Waals material

  • Alfaro-Mozaz, Francisco J.
  • Rodrigo, Sergio G.
  • Alonso-González, Pablo
  • Vélez, Saül
  • Dolado, Irene
  • Casanova, Félix
  • Hueso, Luis E.
  • Martín-Moreno, Luis
  • Hillenbrand, Rainer
  • Nikitin, Alexey Y.
Photonic crystals (PCs) are periodically patterned dielectrics providing opportunities to shape and slow down the light for processing of optical signals, lasing and spontaneous emission control. Unit cells of conventional PCs are comparable to the wavelength of light and are not suitable for subwavelength scale applications. We engineer a nanoscale hole array in a van der Waals material (h-BN) supporting ultra-confined phonon polaritons (PhPs)—atomic lattice vibrations coupled to electromagnetic fields. Such a hole array represents a polaritonic crystal for mid-infrared frequencies having a unit cell volume of 10−5λ30 (with λ0 being the free-space wavelength), where PhPs form ultra-confined Bloch modes with a remarkably flat dispersion band. The latter leads to both angle- and polarization-independent sharp Bragg resonances, as verified by far-field spectroscopy and near-field optical microscopy. Our findings could lead to novel miniaturized angle- and polarization-independent infrared narrow-band couplers, absorbers and thermal emitters based on van der Waals materials and other thin polar materials., The authors acknowledge financial support from the European Commission under the Graphene Flagship (GrapheneCore2), the Spanish Ministry of Economy and Competitiveness (national projects MAT2017-88358-C3,MAT 2015-65159-R, MAT2014-53432-C5, FIS2014-60195-JIN), the Basque government (PhD fellowship PRE-2016-1-0150) and the European Research Council under the starting grants SPINTROS (Grant no. 257654) and 2DNANOPTICA (Grant no. 715496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Versatile Graphene-Based Platform for Robust Nanobiohybrid Interfaces

  • Aceituno Bueno, Rebeca
  • Marciello, Marzia
  • Moreno, Miguel
  • Sánchez-Sánchez, Carlos
  • Martínez, José I.
  • Martínez Orellana, Lidia
  • Prats Alfonso, Elisabet
  • Guimerà-Brunet, Anton
  • Garrido, Jose A.
  • Villa, Rosa
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Huttel, Yves
  • Morales, María Del Puerto
  • Briones, Carlos
  • López, María Francisca
  • Ellis, Gary James
  • Vázquez Burgos, Luis
  • Martín-Gago, José A.
Technologically useful and robust graphene-based interfaces for devices require the introduction of highly selective, stable, and covalently bonded functionalities on the graphene surface, whilst essentially retaining the electronic properties of the pristine layer. This work demonstrates that highly controlled, ultrahigh vacuum covalent chemical functionalization of graphene sheets with a thiol-terminated molecule provides a robust and tunable platform for the development of hybrid nanostructures in different environments. We employ this facile strategy to covalently couple two representative systems of broad interest: metal nanoparticles, via S–metal bonds, and thiol-modified DNA aptamers, via disulfide bridges. Both systems, which have been characterized by a multitechnique approach, remain firmly anchored to the graphene surface even after several washing cycles. Atomic force microscopy images demonstrate that the conjugated aptamer retains the functionality required to recognize a target protein. This methodology opens a new route to the integration of high-quality graphene layers into diverse technological platforms, including plasmonics, optoelectronics, or biosensing. With respect to the latter, the viability of a thiol-functionalized chemical vapor deposition graphene-based solution-gated field-effect transistor array was assessed., This work was supported by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 696656 (Graphene Flagship-core 1) and no 785219 (Graphene Flagship −core 2); UE FP7 ideas: ERC (grant ERC-2013-SYG-610256 Nanocosmos) and Spanish MINECO grants MAT2014-54231-C4-1-P, MAT2014-54231-C4-4-P, MAT2017-85089-C2-1-R, MAT2014-59772-C2-2-P, and BIO2016-79618-R (funded by EU under the FEDER programme), as well as the Nanoavansens program from the Community of Madrid (S2013/MIT-3029). This work has made use of the Spanish ICTS Network MICRONANOFABS partially supported by MINECO and also the ICTS NANBIOSIS, more specifically the Micro-Nano Technology Unit of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN) at the IMB-CNM. We are grateful to Matthias Muntwiler for his assistance with experiments in the PEARL beamline in the SLS facility. Finally, we acknowledge the TEM and ICP services at the CNB and ICMM institutes, respectively. CSS acknowledges the MINECO for a Juan de la Cierva Incorporación grant (IJCI-2014-19291). M. Marciello is grateful to the Comunidad de Madrid (CM) and European Social Fund (ESF) for supporting her research work through the I+D Collaborative Programme in Biomedicine NIETO-CM (B2017-BMD3731)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultra-thin NaCl films as protective layers for graphene

  • Palacio, Irene
  • Lauwaet, Koen
  • Vázquez Burgos, Luis
  • Palomares, F. Javier
  • González-Herrero, Héctor
  • Martínez, José I.
  • Aballe, Lucía
  • Foerster, Michael
  • García-Hernández, Mar
  • Martín-Gago, José A.
The ageing of graphene is an important issue for technological applications. Capping layers are a good way of circumventing this problem. In this work, we propose the use of ultra-thin NaCl films as easilyremovable protective layers. We have carried out a detailed characterization of the NaCl/graphene interface on metal substrates, namely Cu(111) and Ir(111), by means of complementary microscopies, electron diffraction and spectroscopic techniques. Interestingly, we show that NaCl neither interacts in a chemical way with graphene nor intercalates through it. We demonstrate that the NaCl film is stable under ambient conditions, protecting the graphene surface from oxidation. In addition, after removing the protective layer, graphene remains intact., This work has been supported by the EU Graphene Flagship funding (Grant Graphene Core2 785219), the Spanish MINECO (MAT2017-85089-C2-1R, MAT2016-80394-R and RYC-2015-17730) and the EU via the ERC-Synergy Program (Grant ERC-2013-SYG-610256 NANOCOSMOS) and the European Structural Funds via FotoArt-CM project (P2018/NMT-4367)., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Boosting and balancing electron and hole mobility in single- and bilayer WSe2 devices via tailored molecular functionalization

  • Stoeckel, Marc-Antoine
  • Gobbi, Marco
  • Leydecker, Tim
  • Wang, Ye
  • Eredia, Matilde
  • Bonacchi, Sara
  • Verucchi, Roberto
  • Timpel, Melanie
  • Nardi, Marco V.
  • Orgiu, Emanuele
  • Samorì, Paolo
WSe2 is a layered ambipolar semiconductor enabling hole and electron transport, which renders it a suitable active component for logic circuitry. However, solid-state devices based on single- and bilayer WSe2 typically exhibit unipolar transport and poor electrical performance when conventional SiO2 dielectric and Au electrodes are used. Here, we show that silane-containing functional molecules form ordered monolayers on the top of the WSe2 surface, thereby boosting its electrical performance in single- and bilayer field-effect transistors. In particular, by employing SiO2 dielectric substrates and top Au electrodes, we measure unipolar mobility as high as μh = 150 cm2 V-1 s-1 and μe = 17.9 cm2 V-1 s-1 in WSe2 single-layer devices when ad hoc molecular monolayers are chosen. Additionally, by asymmetric double-side functionalization with two different molecules, we provide opposite polarity to the top and bottom layer of bilayer WSe2, demonstrating nearly balanced ambipolarity at the bilayer limit. Our results indicate that the controlled functionalization of the two sides of the WSe2 mono- and bilayer flakes with highly ordered molecular monolayers offers the possibility to simultaneously achieve energy level engineering and defect functionalization, representing a path toward deterministic control over charge transport in 2D materials., We acknowledge funding from the European Commission through the Graphene Flagship Core 2 project (GA-785219), the Marie Sklodowska-Curie IEF SUPER2D (GA-748971) and IEF-GALACTIC (GA-2014-628563), the Agence Nationale de la Recherche through the Labex projects CSC (ANR-10-LABX-0026 CSC) and NIE (ANR-11-LABX-0058 NIE) within the Investissement d’Avenir program (ANR-10-120 IDEX-0002-02), the International Center for Frontier Research in Chemistry (icFRC), as well as the Chinese Scholarship Council. M.V.N. and M.T. gratefully acknowledge the support by the CARITRO Foundation (project MILA, grant no. 2017.0369), Trento (Italy). E.O. is supported by the Natural Sciences and Engineering Research Council of Canada (NSERC) through an individual Discovery Grant and by Fonds de recherche du Quebec - Nature et Technologies (FRQNT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High Performance Na-O2 Batteries and Printed Microsupercapacitors Based on Water-Processable, Biomolecule-Assisted Anodic Graphene

  • Munuera Fernández, José María
  • Paredes Nachón, Juan Ignacio
  • Enterría, Marina
  • Villar Rodil, Silvia
  • Kelly, Adam G.
  • Nalawade, Yashaswi
  • Coleman, Jonathan N.
  • Rojo, Teófilo
  • Ortiz-Vitoriano, Nagore
  • Martínez Alonso, Amelia
  • Díez Tascón, Juan Manuel
Integrated approaches that expedite the production and processing of graphene into useful structures and devices, particularly through simple and environmentally friendly strategies, are highly desirable in the efforts to implement this two-dimensional material in state-of-the-art electrochemical energy storage technologies. Here, we introduce natural nucleotides (e.g., adenosine monophosphate) as bifunctional agents for the electrochemical exfoliation and dispersion of graphene nanosheets in water. Acting both as exfoliating electrolytes and colloidal stabilizers, these biomolecules facilitated access to aqueous graphene bio-inks that could be readily processed into aerogels and inkjet-printed interdigitated patterns. Na-O2 batteries assembled with the graphene-derived aerogels as the cathode and a glyme-based electrolyte exhibited a full discharge capacity of ∼3.8 mAh cm–2 at a current density of 0.2 mA cm–2. Moreover, shallow cycling experiments (0.5 mAh cm–2) boasted a capacity retention of 94% after 50 cycles, which outperformed the cycle life of prior graphene-based cathodes for this type of battery. The positive effect of the nucleotide-adsorbed nanosheets on the battery performance is discussed and related to the presence of the phosphate group in these biomolecules. Microsupercapacitors made from the interdigitated graphene patterns as the electrodes also displayed a competitive performance, affording areal and volumetric energy densities of 0.03 μWh cm–2 and 1.2 mWh cm–3 at power densities of 0.003 mW cm–2 and 0.1 W cm–3, respectively. Taken together, by offering a green and straightforward route to different types of functional graphene-based materials, the present results are expected to ease the development of novel energy storage technologies that exploit the attractions of graphene., Funding by the Spanish Ministerio de Economía y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project MAT2015-69844-R and by the Spanish Ministerio de Ciencia, Innovación y Universidades and ERDF through project RTI2018-100832-B-I00 is gratefully acknowledged. Partial funding by Plan de Ciencia, Tecnología e Innovación (PCTI) 2013-2017 del Principado de Asturias and the ERDF through project IDI/2018/000233 is also acknowledged. J.M.M. is grateful to the Spanish Ministerio de Educación, Cultura y Deporte (MECD) for his pre-doctoral contract (FPU14/00792). J.N.C. acknowledges the ERC Adv. Gr. FUTUREPRINT. This work was also financially supported by the European Union (Graphene Flagship, Core 2, Grant number 785219)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Production and processing of graphene and related materials

  • Backes, Claudia
  • Abdelkader, Amr M.
  • Alonso, Concepción
  • Andrieux-Ledier, Amandine
  • Arenal, Raúl
  • Azpeitia-Urkia, Jon
  • Balakrishnan, Nilanthy
  • Banszerus, Luca
  • Barjon, Julien
  • Bartali, Ruben
  • Bellani, Sebastiano
  • Melucci, Manuela
  • Beton, Peter H.
  • Patane, Amalia
  • Muñoz, Roberto
  • Méndez, Javier
  • Merino, César
  • Zhang, Xianghui
  • Villaro, Elvira
  • Ortolani, Luca
  • Ruffieux, Pascal
  • Borin Barin, Gabriela
  • Miseikis, Vaidotas
  • Zhuang, Xiaodong
  • Pugno, Nicola
  • Yazdi, Reza G.
  • Bernard, Carlo
  • Tortello, Mauro
  • Carriazo, Daniel
  • Parthenios, John
  • Rojo, Teófilo
  • Ott, Anna K.
  • Tomarchio, Flavia
  • Coletti, Camilla
  • Palacio, Irene
  • Castellanos-Gómez, Andrés
  • Strupinski, Wlodek
  • Prevost, Henri
  • Cun, Huanyao
  • Pasternak, Iwona
  • Prudkovskiy, Vladimir
  • Feng, Xinliang
  • Coleman, Jonathan
  • Fasel, Román
  • Beyer, André
  • García-Hernández, Mar
  • Díez, Noel
  • Prato, Maurizio
  • Berger, Claire
  • Stenger, Ingrid
  • Bonaccorso, Francesco
  • Crema, Luigi
  • Botas, Cristina
  • Aceituno Bueno, Rebeca
  • Hemmi, Adrian
  • Hirsch, Andreas
  • Yang, Sheng
  • Ciesielski, Artur
  • Kenneth, Teo B. K.
  • Ciuk, Tymoteusz
  • Cole, Matthew T.
  • Bøggild, Peter
  • Berger, Reinhard
  • Bernal, M. Mar
  • Galiotis, Costas
  • Hodge, Stephen A.
  • Drieschner, Simon
  • Garrido, Jose A.
  • Bianco, Alberto
  • Kim, HoKwon
  • Setijadi, Eki
  • García Martínez, Jorge Manuel
  • Stampfer, Christoph
  • Speranza, Giorgio
  • Dasler, Daniela
  • Garberoglio, Giovanni
  • Duesberg, Georg S.
  • Testi, Matteo
  • Lombardi, Lucia
  • Kaplas, Tommi
  • Gómez, Julio
  • Ferrari, Andrea C.
  • Gölzhäuser, Armin
  • Schué, Léonard
  • Fina, Alberto
  • Forti, Stiven
  • Hernández-Rodríguez, Irene
  • Gibertini, Marco
  • Vázquez, Ester
  • Yakimova, Rositza
  • Yoon, Duhee
  • Martínez, José I.
  • Martín-Gago, José A.
  • Greber, Thomas
  • Hauke, Frank
  • López, María Francisca
  • Lee, Kangho
  • Merino, Pablo
  • Kostarelos, Kostas
  • Seyller, Thomas
  • Papagelis, Konstantinos
  • Yim, Chanyoung
  • Nolan, Hugo
  • Kis, Andras
  • Huttel, Yves
  • Jepsen, Peter U.
  • Rossi, Antonio
  • Morandi, Vittorio
  • Jiménez, Ignacio
  • Kaiser, Ute
  • Li, Changfeng
  • Loiseau, Annick
  • Svirko, Yuri
  • Colombo, Luigi
  • Krajewska, Aleksandra
  • Mayoral, Álvaro
  • Treossi, Emanuele
  • Meyer, Andreas P.
  • Xia, Zhenyuan
  • Lipsanen, Harri
  • Munuera, C.
  • Liscio, Andrea
  • Lohe, Martin R.
  • Samorì, Paolo
  • Turchanin, Andrey
  • McManus, John
  • Martín, Oliver
  • Martín, Cristina
  • De-Fazio, Domenico
  • Palermo, Vincenzo
  • Martínez-Izquierdo, Lidia
  • Taioli, Simone
  • Christian, Meganne
  • Mishra, Neeraj
  • Marzari, Nicola
  • Whelan, Patrick R.
  • Miniussi, Elisa
We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV–VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp 2 basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp 2 carbon network by π–π stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs, can be functionalized and we summarize emerging approaches to covalently and noncovalently functionalize MoS2 both in the liquid and on substrate. Section IX describes some of the most popular characterization techniques, ranging from optical detection to the measurement of the electronic structure. Microscopies play an important role, although macroscopic techniques are also used for the measurement of the properties of these materials and their devices. Raman spectroscopy is paramount for GRMs, while PL is more adequate for non-graphene LMs (see section IX.2). Liquid based methods result in flakes with different thicknesses and dimensions. The qualification of size and thickness can be achieved using imaging techniques, like scanning probe microscopy (SPM) or transmission electron microscopy (TEM) or spectroscopic techniques. Optical microscopy enables the detection of flakes on suitable surfaces as well as the measurement of optical properties. Characterization of exfoliated materials is essential to improve the GRM metrology for applications and quality control. For grown GRMs, SPM can be used to probe morphological properties, as well as to study growth mechanisms and quality of transfer. More generally, SPM combined with smart measurement protocols in various modes allows one to get obtain information on mechanical properties, surface potential, work functions, electrical properties, or effectiveness of functionalization. Some of the techniques described are suitable for 'in situ' characterization, and can be hosted within the growth chambers. If the diagnosis is made 'ex situ', consideration should be given to the preparation of the samples to avoid contamination. Occasionally cleaning methods have to be used prior to measurement., We acknowledge funding from the European Commission Graphene Flagship Core1 (grant agreement 696656) and Core2 (grant agreement 785219)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Proximity-induced spin-orbit coupling in graphene/ Bi1.5 Sb0.5 Te1.7 Se1.3 heterostructures

  • Jafarpisheh, S.
  • Cummings, Aron W.
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Beschoten, Bernd
  • Stampfer, Christoph
The weak intrinsic spin-orbit coupling in graphene can be greatly enhanced by proximity coupling. Here, we report on the proximity-induced spin-orbit coupling in graphene transferred by hexagonal boron nitride (hBN) onto the topological insulator Bi1.5 Sb0.5 Te1.7 Se1.3 (BSTS) which was grown on a hBN substrate by vapor solid synthesis. Phase coherent transport measurements, revealing weak localization, allow us to extract the carrier density-dependent phase coherence length lϕ. While lϕ increases with increasing carrier density in the hBN/graphene/hBN reference sample, it decreases in graphene/BSTS due to the proximity coupling of BSTS to graphene. The latter behavior results from D'yakonov-Perel'-type spin scattering in graphene with a large proximity-induced spin-orbit coupling strength of at least 2.5 meV., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 785219 (Graphene Flagship), the Virtual Institute for Topological Insulators (Jülich-Aachen-Würzburg-Shanghai), and by the Deutsche Forschungsgemeinschaft (DFG) through SPP 1666 (BE 2441/8-2). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2013-0295) and funded by the CERCA Programme/Generalitat de Catalunya. Growth of hexagonal boron nitride crystals was supported by the Elemental Strategy Initiative conducted by the MEXT, Japan and JSPS KAKENHI Grants No. JP26248061, No. JP15K21722, and No. JP25106006., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Screen-printed electroluminescent lamp modified with graphene oxide as a sensing device

  • Yakoh, Abdulhadee
  • Álvarez-Diduk, Ruslan
  • Chailapakul, Orawon
  • Merkoçi, Arben
A screen-printed electroluminescent display with different sensing capabilities is presented. The sensing principle is based on the direct relationship between the light intensity of the lamp and the conductivity of the external layers. The proposed device is able to detect the ionic concentration of any conductive species. Using both top and bottom emission architectures, for the first time, a humidity sensor based on electroluminescent display functionalized by a graphene oxide nanocomposite is introduced. In this regard, just by coupling the display to a smartphone camera sensor, its potential was expanded for automatically monitoring human respiration in real time. Besides, the research includes a responsive display in which the light is spatially turned on in response to pencil drawing or any other conductive media. The above mentioned features together with the easiness of manufacturing and cost-effectiveness of this electroluminescent display can open up great opportunities to exploit it in sensing applications and point-of-care diagnosis., We acknowledge financial support from EU Graphene Flagship Core 2 Project (No. 785219). This work is also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2013-0295). A.Y. and O.C. thank the Science Achievement Scholarship of Thailand (SAST), the Thailand Research Fund via the Research Team Promotion Grant (RTA6080002) and the Ratchadaphisaksomphot Endowment Fund of Chulalongkorn University. A.M. thanks Silver Merkoci̧ from Gwent Electronic Materials Ltd./Sun Chemical for his inspiring discussions on the use of electroluminescent materials in sensing. R.Á.-D. acknowledges the financial support from the CONACYT (Mexico)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spin transport in graphene/transition metal dichalcogenide heterostructures

  • Garcia, Jose H.
  • Vila, Marc
  • Cummings, Aron W.
  • Roche, Stephan
Since its discovery, graphene has been a promising material for spintronics: its low spin–orbit coupling, negligible hyperfine interaction, and high electron mobility are obvious advantages for transporting spin information over long distances. However, such outstanding transport properties also limit the capability to engineer active spintronics, where strong spin–orbit coupling is crucial for creating and manipulating spin currents. To this end, transition metal dichalcogenides, which have larger spin–orbit coupling and good interface matching, appear to be highly complementary materials for enhancing the spin-dependent features of graphene while maintaining its superior charge transport properties. In this review, we present the theoretical framework and the experiments performed to detect and characterize the spin–orbit coupling and spin currents in graphene/transition metal dichalcogenide heterostructures. Specifically, we will concentrate on recent measurements of Hanle precession, weak antilocalization and the spin Hall effect, and provide a comprehensive theoretical description of the interconnection between these phenomena., ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2013-0295) and funded by the CERCA Programme/Generalitat de Catalunya. The authors acknowledge the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (Project No. FIS2015-67767-P MINECO/FEDER), the Secretaría de Universidades e Investigación del Departamento de Economía y Conocimiento de la Generalidad de Catalunya (2014 SGR 58), PRACE and the Barcelona Supercomputing Center (Project No. 2015133194), and the European Union Seventh Framework Programme under Grant Agreement No. 785219 Graphene Flagship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailoring emergent spin phenomena in Dirac material heterostructures

  • Khokhriakov, Dmitrii
  • Cummings, Aron W.
  • Song, Kenan
  • Vila, Marc
  • Karpiak, Bogdan
  • Dankert, André
  • Roche, Stephan
  • Dash, Saroj P.
Dirac materials such as graphene and topological insulators (TIs) are known to have unique electronic and spintronic properties. We combine graphene with TIs in van der Waals heterostructures to demonstrate the emergence of a strong proximity-induced spin-orbit coupling in graphene. By performing spin transport and precession measurements supported by ab initio simulations, we discover a strong tunability and suppression of the spin signal and spin lifetime due to the hybridization of graphene and TI electronic bands. The enhanced spin-orbit coupling strength is estimated to be nearly an order of magnitude higher than in pristine graphene. These findings in graphene-TI heterostructures could open interesting opportunities for exploring exotic physical phenomena and new device functionalities governed by topological proximity effects., Chalmers researchers acknowledge financial support from the European Union (EU) Horizon 2020 Research and Innovation Programme GrapheneCore2 contract number 785219 (Graphene Flagship), EU FLAG-ERA project (from Swedish Research Council VR no. 2015- 06813), Swedish Research Council VR project grants (no. 2016-03658), Graphene Center, and the AoA Nano program at Chalmers University of Technology. Catalan Institute of Nanoscience and Nanotechnology (ICN2) was supported by the Severo Ochoa program from Spanish Ministry of Economy and Competitiveness (MINECO; grant no. SEV-2013-0295) and funded by the Centres de Recerca de Catalunya Programme/Generalitat de Cataluña. S.R. acknowledges the Spanish MINECO and the European Regional Development Fund (project no. FIS2015- 67767-P MINECO/FEDER), and the Secretaría de Universidades e Investigación del Departamento de Economía y Conocimiento de la Generalitat de Cataluña (2014 SGR 58)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Understanding the bias dependence of low frequency noise in single layer graphene FETs

  • Mavredakis, Nikolaos
  • Garcia Cortadella, Ramon
  • Bonaccini Calia, Andrea
  • Garrido, Jose A.
  • Jiménez, David
This letter investigates the bias-dependent low frequency noise of single layer graphene field-effect transistors. Noise measurements have been conducted with electrolyte-gated graphene transistors covering a wide range of gate and drain bias conditions for different channel lengths. A new analytical model that accounts for the propagation of the local noise sources in the channel to the terminal currents and voltages is proposed in this paper to investigate the noise bias dependence. Carrier number and mobility fluctuations are considered as the main causes of low frequency noise and the way these mechanisms contribute to the bias dependence of the noise is analyzed in this work. Typically, normalized low frequency noise in graphene devices has been usually shown to follow an M-shape dependence versus gate voltage with the minimum near the charge neutrality point (CNP). Our work reveals for the first time the strong correlation between this gate dependence and the residual charge which is relevant in the vicinity of this specific bias point. We discuss how charge inhomogeneity in the graphene channel at higher drain voltages can contribute to low frequency noise; thus, channel regions nearby the source and drain terminals are found to dominate the total noise for gate biases close to the CNP. The excellent agreement between the experimental data and the predictions of the analytical model at all bias conditions confirms that the two fundamental 1/f noise mechanisms, carrier number and mobility fluctuations, must be considered simultaneously to properly understand the low frequency noise in graphene FETs. The proposed analytical compact model can be easily implemented and integrated in circuit simulators, which can be of high importance for graphene based circuits' design., This work was funded by the Ministerio de Economía y Competitividad under the project TEC2015-67462-C2-1-R and the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. GrapheneCore2 785219 (Graphene Flagship), Marie Skłodowska-Curie Grant Agreement No. 665919 and Grant Agreement No. 732032 (BrainCom)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A nitrocellulose paper strip for fluorometric determination of bisphenol A using molecularly imprinted nanoparticles

  • Üzek, Recep
  • Sari, Esma
  • Şenel, Serap
  • Denizli, Adil
  • Merkoçi, Arben
The authors describe a test stripe for fluorometric determination of the endocrine disruptor bisphenol A (BPA). Graphene quantum dots (GQDs) were immobilized on molecularly imprinted nanoparticles which then were placed on nitrocellulose paper. The GQDs display blue fluorescence (with excitation/emission peaks at 350/440 nm) which is reduced in the presence of BPA. The test stripe has a 43.9 ± 0.8 μg·L−1 limit of detection in case of water samples. The stripe was applied to the determination of BPA in (spiked) tap water and sea water, and the LODs were found to be 1.8 ± 0.2 μg·L−1 and 4.2 ± 0.5 μg·L−1, respectively. Structural analogs of BPA, such as aminophenol, phenol, hydroquinone and naphthol were found not to interfere., Recep Üzek thanks to TUBITAK for the given scholarship. We acknowledge support from MINECO, Spain for MAT2017-87202-P and Graphene Flagship Core Project 2 (Ref: 785219). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). This work is also funded by the CERCA Programme / Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gate electrostatics and quantum capacitance in ballistic graphene devices

  • Caridad, José M.
  • Power, Stephen R.
  • Shylau, Artsem A.
  • Gammelgaard, Lene
  • Jauho, Antti-Pekka
  • Bøggild, Peter
We experimentally investigate the charge induction mechanism across gated, narrow, ballistic graphene devices with different degrees of edge disorder. By using magnetoconductance measurements as the probing technique, we demonstrate that devices with large edge disorder exhibit a nearly homogeneous capacitance profile across the device channel, close to the case of an infinitely large graphene sheet. In contrast, devices with lower edge disorder ( < 1 nm roughness) are strongly influenced by the fringing electrostatic field at graphene boundaries, in quantitative agreement with theoretical calculations for pristine systems. Specifically, devices with low edge disorder present a large effective capacitance variation across the device channel with a nontrivial, inhomogeneous profile due not only to classical electrostatics but also to quantum mechanical effects. We show that such quantum capacitance contribution, occurring due to the low density of states across the device in the presence of an external magnetic field, is considerably altered as a result of the gate electrostatics in the ballistic graphene device. Our conclusions can be extended to any two-dimensional (2D) electronic system confined by a hard-wall potential and are important for understanding the electronic structure and device applications of conducting 2D materials., This work was supported by the Danish National Research Foundation Center for Nanostructured Graphene (Project No. DNRF103) and the Union’s Horizon 2020 research and innovation programme (Grant No. GrapheneCore2 785219). J.M.C. acknowledges funding from the Øtto Monsteds Fond. S.R.P. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie Grant No. 665919 and from the Irish Research Council under the laureate awards programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene oxide as an optical biosensing platform: A progress report

  • Morales-Narváez, Eden
  • Merkoçi, Arben
A few years ago, crucial graphene oxide (GO) features such as the carbon/oxygen ratio, number of layers, and lateral size were scarcely investigated and, thus, their impact on the overall optical biosensing performance was almost unknown. Nowadays valuable insights about these features are well documented in the literature, whereas others remain controversial. Moreover, most of the biosensing systems based on GO were amenable to operating as colloidal suspensions. Currently, the literature reports conceptually new approaches obviating the need of GO colloidal suspensions, enabling the integration of GO onto a solid phase and leading to their application in new biosensing devices. Furthermore, most GO‐based biosensing devices exploit photoluminescent signals. However, further progress is also achieved in powerful label‐free optical techniques exploiting GO in biosensing, particularly using optical fibers, surface plasmon resonance, and surface enhanced Raman scattering. Herein, a critical overview on these topics is offered, highlighting the key role of the physicochemical properties of GO. New challenges and opportunities in this exciting field are also highlighted., E.M.‐N. acknowledges the financial support from CONACYT (Mexico, Grant 293523) and National System of Researchers, CONACYT (Mexico, Grant 74314). A.M. thanks the support from European Commission through the Graphene Flagship Core 2 project. ICN2 acknowledges the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV2201320295. ICN2 is also funded by the CERCA Program/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Long-term functionality of transversal intraneural electrodes is improved by dexamethasone treatment

  • Oliva, Natàlia de la
  • Valle, Jaume del
  • Delgado-Martínez, Ignacio
  • Mueller, Matthias
  • Stieglitz, Thomas
  • Navarro, Xavier
Neuroprostheses aimed to restore lost functions after a limb amputation are based on the interaction with the nervous system by means of neural interfaces. Among the different designs, intraneural electrodes implanted in peripheral nerves represent a good strategy to stimulate nerve fibers to send sensory feedback and to record nerve signals to control the prosthetic limb. However, intraneural electrodes, as any device implanted in the body, induce a foreign body reaction (FBR) that results in the tissue encapsulation of the device. The FBR causes a progressive decline of the electrode functionality over time due to the physical separation between the electrode active sites and the axons to the interface. Modulation of the inflammatory response has arisen as a good strategy to reduce the FBR and maintain electrode functionality. In this paper, transversal intraneural multi-channel electrodes (TIMEs) were implanted in the rat sciatic nerve and tested for three months to evaluate stimulation and recording capabilities under chronic administration of dexamethasone. Dexamethasone treatment significantly reduced the threshold for evoking muscle responses during the follow-up compared to saline-treated animals, without affecting the selectivity of stimulation. However, dexamethasone treatment did not improve the signal-to-noise ratio of the recorded neural signals. Dexamethasone treatment allowed to maintain more working active sites along time than saline treatment. Thus, systemic administration of dexamethasone appears as a useful treatment in chronically implanted animals with neural electrodes as it increases the number of functioning contacts of the implanted TIME and reduces the intensity needed to stimulate the nerve., This research was supported by the European Union FPTICT projects NEBIAS (contract number FP7-611687), EPIONE (FP7-602547), FEDER and by the European Union’s Horizon 2020 Graphene Flagship Core Project 2 (grant agreement 785219) and FLAG-ERA JTC 2017 project GRAFIN, by TERCEL (RD12/0019/0011) and CIBERNED (CB06/05/1105) funds from the Instituto de Salud Carlos III of Spain, and by Fundación Ramón Areces (CIVP18A3897). The ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant SEV-2013-0295), and by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Probing the nanoscale origin of strain and doping in graphene-hBN heterostructures

  • Vincent, Tom
  • Panchal, Vishal
  • Booth, Timothy J.
  • Power, Stephen R.
  • Jauho, Antti-Pekka
  • Antonov, Vladimir
  • Kazakova, Olga
We use confocal Raman microscopy and a recently proposed vector analysis scheme to investigate the nanoscale origin of strain and carrier concentration in exfoliated graphene-hexagonal boron nitride (hBN) heterostructures on silicon dioxide (SiO2). Two types of heterostructures are studied: graphene on SiO2 partially covered by hBN, and graphene fully encapsulated between two hBN flakes. We extend the vector analysis method to produce separated spatial maps of the strain and doping variation across the heterostructures. This allows us to visualise and directly quantify the much-speculated effect of the environment on carrier concentration in graphene. Moreover, we demonstrate that variations in strain and carrier concentration in graphene arise from nanoscale features of the heterostructures such as fractures, folds and bubbles trapped between layers. For bubbles in hBN-encapsulated graphene, hydrostatic strain is shown to be greatest at bubble centres, whereas the maximum carrier concentration is localised at bubble edges. Raman spectroscopy is shown to be a non-invasive tool for probing strain and doping in graphene, which could prove useful for engineering of two-dimensional devices., This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement GrapheneCore2 785219 number. The work has been also financially supported by the Department for Business, Energy and Industrial Strategy though NMS funding (2D Materials Cross-team project). The work has been partly realized within the Joint Research Project 16NRM01 GRACE: Developing electrical characterisation methods for future graphene electronics. This project has received funding from the EMPIR programme co-financed by the Participating States and from the European Union's Horizon 2020 research and innovation programme. SRP acknowledges funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skodowska-Curie grant agreement No 665919 and from the Irish Research Council under the laureate awards programme. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya and supported by the Severo Ochoa programme (MINECO, Grant. No. SEV-2013-0295). The Center for Nanostructured Graphene (CNG) is sponsored by the Danish Research Foundation, Project DNRF103., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Production and printing of graphene oxide foam ink for electrocatalytic applications

  • Baptista-Pires, Luis
  • Escosura-Muñiz, Alfredo de la
  • Balsells, Marc
  • Zuaznabar-Gardona, Julio C.
  • Merkoçi, Arben
A graphene-based ink printed as a foam-like structure with open pores is reported. The production of the ink is easier and faster than using existing methods and the obtained product is stable in water suspension. Electrocatalytic applications of 3D structured electrodes printed onto plastic substrates were explored., We acknowledge support from MINECO, Spain, for MAT2017-87202-P, the Severo Ochoa program (Grant No. SEV-2013-0295) and Graphene Flagship Core Project 2 (Ref: 785219). This work is also funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Paper based photoluminescent sensing platform with recognition sites for tributyltin

  • Sari, Esma
  • Üzek, Recep
  • Merkoçi, Arben
In this study, a novel photoluminescence material for the detection of tributyltin (TBT) was developed by using a paper-based nanocomposite system. For this purpose, molecularly imprinted polymeric nanoparticles (MIN) were synthesized with mini-emulsion polymerization technique. Graphene quantum dots obtained by the hydrothermal pyrolysis were immobilized to the nanoparticle surface via EDC-NHS coupling. The fabrication of sensing platform for TBT can be divided into two steps that are the preparation of nanocomposite and the applying the nanocomposite onto nitrocellulose membrane. The selectivity constant and association kinetics were calculated to analyze the interaction of TBT with immobilized MINs. The results proved that the developed nanosensor is promising for the determination of TBT with high selectivity and sensitivity reaching a detection limit of 0.23 ppt in seawater. This novel photoluminescent nanosensor has the potential to pave the way for further studies and applications., Recep Üzek thanks to TUBITAK for the given scholarship. We acknowledge the support from European Commission through the Graphene Flagship Core 2 project and from Ministerio de Economıa, Industria y Competitividad (MINECO), Agencia Estatal de Investigacion (AEI) for the project MAT2017-87202-P. The ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spin communication over 30 µm long channels of chemical vapor deposited graphene on SiO2

  • Gebeyehu, Zewdu M.
  • Parui, S.
  • Sierra, Juan F.
  • Timmermans, Matias
  • Esplandiú, María J.
  • Brems, S.
  • Huyghebaert, C.
  • Garello, Kevin
  • Costache, Marius V.
  • Valenzuela, Sergio O.
We demonstrate a high-yield fabrication of non-local spin valve devices with room-temperature spin lifetimes of up to 3 ns and spin relaxation lengths as long as 9 µm in platinum-based chemical vapor deposition (Pt-CVD) synthesized single-layer graphene on SiO2/Si substrates. The spin-lifetime systematically presents a marked minimum at the charge neutrality point, as typically observed in pristine exfoliated graphene. However, by studying the carrier density dependence beyond n ~ 5  ×  1012 cm−2, via electrostatic gating, it is found that the spin lifetime reaches a maximum and then starts decreasing, a behavior that is reminiscent of that predicted when the spin-relaxation is driven by spin–orbit interaction. The spin lifetimes and relaxation lengths compare well with state-of-the-art results using exfoliated graphene on SiO2/Si, being a factor two-to-three larger than the best values reported at room temperature using the same substrate. As a result, the spin signal can be readily measured across 30 µm long graphene channels. These observations indicate that Pt-CVD graphene is a promising material for large-scale spin-based logic-in-memory applications., This research was partially supported by the European Union’s Horizon 2020 research and innovation programme, Graphene Flagship CORE 2, under grant agreement No. 785219, by the Spanish Ministry of Economy and Competitiveness, MINECO (under Contracts No. MAT2013-46785-P, No. MAT2016-75952-R, No. MAT2015-68307-P and Severo Ochoa No. SEV- 2017-0706), and by the CERCA Programme and the Secretariat for Universities and Research, Knowledge Department of the Generalitat de Catalunya, 2017 SGR 827. ZMG acknowledges support from MINECO FPI fellowship under Contract No. BES-2014-069925 and MT from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodoswa-Curie grant agreement Nº 665919., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spin states protected from intrinsic electron–phonon coupling reaching 100 ns lifetime at room temperature in MoSe2

  • Ersfeld, Manfred
  • Volmer, Frank
  • Melo, Pedro Miguel M. C. de
  • Winter, Robin de
  • Heithoff, Maximilian
  • Zanolli, Zeila
  • Stampfer, Christoph
  • Verstraete, Matthieu J.
  • Beschoten, Bernd
We present time-resolved Kerr rotation measurements, showing spin lifetimes of over 100 ns at room temperature in monolayer MoSe2. These long lifetimes are accompanied by an intriguing temperature-dependence of the Kerr amplitude, which increases with temperature up to 50 K and then abruptly switches sign. Using ab initio simulations, we explain the latter behavior in terms of the intrinsic electron–phonon coupling and the activation of transitions to secondary valleys. The phonon-assisted scattering of the photoexcited electron–hole pairs prepares a valley spin polarization within the first few ps after laser excitation. The sign of the total valley magnetization, and thus the Kerr amplitude, switches as a function of temperature, as conduction and valence band states exhibit different phonon-mediated intervalley scattering rates. However, the electron–phonon scattering on the ps time scale does not provide an explanation for the long spin lifetimes. Hence, we deduce that the initial spin polarization must be transferred into spin states, which are protected from the intrinsic electron–phonon coupling, and are most likely resident charge carriers, which are not part of the itinerant valence or conduction band states., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 785219. It was also supported by the Helmholtz Nanoelectronic Facility (HNF)57 at the Forschungszentrum Jülich. P.M.M.C.M. and M.J.V. acknowledge funding by the Belgian FNRS (PDR G.A. T.1077.15-1/7) and the Communauté Francaise de Belgique (ARC AIMED G.A. 15/19-09). ̧ Z.Z. acknowledges financial support by the Ramon y Cajal program (RYC-2016-19344), the CERCA programme of the Generalitat de Catalunya (grant 2017SGR1506), the Severo Ochoa programme (MINECO, SEV-2017-0706), and the EC H2020-INFRAEDI-2018-2020 MaX “Materials Design at the Exascale” CoE (grant No. 824143). Computational resources have been provided by the Consortium des Equipements de Calcul Intensif (CECI), funded by FRS-FNRS G.A. 2.5020.11; the Zenobe Tier-1 supercomputer is funded by the Walloon Region under G.A. 1117545 and by a PRACE-3IP DECI grant 2DSpin on Beskow (G.A. 653838 of H2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An overview of the recent advances in inorganic nanotubes

  • Serra, Marco
  • Arenal, Raúl
  • Tenne, Reshef
Advanced nanomaterials play a prominent role in nanoscience and nanotechnology developments, opening new frontiers in these areas. Among these nanomaterials, due to their unique characteristics and enhanced chemical and physical properties, inorganic nanotubes have been considered one of the most interesting nanostructures. In recent years, important progress has been achieved in the production and study of these nanomaterials, including boron nitride, transition metal dichalcogenide nanotubular structures, misfit-based nanotubes and other hybrid/doped nanotubular objects. This review is devoted to the in-depth analysis of recent studies on the synthesis, atomic structures, properties and applications of inorganic nanotubes and related nanostructures. Particular attention is paid to the growth mechanism of these nanomaterials. This is a crucial point for the challenges ahead related to the mass production of high-quality defect-free nanotubes for a variety of applications., R. T. acknowledges the support of the Israel Science Foundation (grant No. 7130970101). We also wish to acknowledge the Perlman Family Foundation; the Kimmel Center for Nanoscale Science Grant No. 43535000350000; and the Irving and Azelle Waltcher Foundations in honour of Prof. M. Levy Grant No. 720821. R. A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) and from the EU H2020 program “Graphene Flagship” (Grant Agreement 785219), the EU H2020 & APCIN-MICINN Spain (JTC-2017 Flag-ERA GATES project) and the EU H2020 program “ESTEEM3” (Grant Agreement 823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Au-MoS2 hybrids as hydrogen evolution electrocatalysts

  • Bar-Ziv, Ronen
  • Ranjan, Priyadarshi
  • Lavie, Anna
  • Jain, Akash
  • Garai, Somenath
  • Bar Hen, Avraham
  • Popovitz-Biro, Ronit
  • Tenne, Reshef
  • Arenal, Raúl
  • Ramasubramaniam, Ashwin
  • Lajaunie, Luc
  • Bar-Sadan, Maya
Core–shell nanoparticles provide a unique morphology to exploit electronic interactions between dissimilar materials, conferring upon them new or improved functionalities. MoS2 is a layered transition-metal disulfide that has been studied extensively for the hydrogen evolution reaction (HER) but still suffers from low electrocatalytic activity due to its poor electronic conductivity. To understand the fundamental aspects of the MoS2–Au hybrids with regard to their electrocatalytic activity, a single to a few layers of MoS2 were deposited over Au nanoparticles via a versatile procedure that allows for complete encapsulation of Au nanoparticles of arbitrary geometries. High-resolution transmission electron microscopy of the Au@MoS2 nanoparticles provides direct evidence for the core–shell morphology and also reveals the presence of morphological defects and irregularities in the MoS2 shell that are known to be more active for HER than the pristine MoS2 basal plane. Electrochemical measurements show a significant improvement in the HER activity of Au@MoS2 nanoparticles relative to freestanding MoS2 or Au-decorated MoS2. The best electrochemical performance was demonstrated by the Au nanostars—the largest Au core employed here—encapsulated in a MoS2 shell. Density-functional theory calculations show that charge transfer occurs from the Au to the MoS2 layers, producing a more conductive catalyst layer and a better electrode for electrochemical HER. The strategies to further improve the catalytic properties of such hybrid nanoparticles are discussed., We acknowledge the support of the Israel Science Foundation Grant No. 339/18; the Kimmel Center for Nanoscale Science Grant No. 43535000350000; the Irving and Azelle Waltcher Foundations in honor of Prof. M. Levy Grant No. 720821; and The Perlman Family Foundation. The HR-STEM and STEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R.A. acknowledges support from Spanish MINECO Grant No. MAT2016-79776-P (AEI/FEDER, UE) and from EU H2020 “Graphene Flagship” Grant Agreement 785219. A.J. and A.R. gratefully acknowledge research funding from the U.S. Department of Energy under Award No. DE-SC0010610 and computing support from the Massachusetts Green High-Performance Computing Center. This research was supported by a grant from the United States–Israel Binational Science Foundation (BSF), Jerusalem, Israel (2016/149)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering vacancies in Bi2S3 yielding sub-bandgap photoresponse and highly sensitive short-wave infrared photodetectors

  • Huo, Nengjie
  • Figueroba, Alberto
  • Yang, Yujue
  • Christodoulou, Sotirios
  • Stavrinadis, Alexandros
  • Magén, César
  • Konstantatos, Gerasimos
Defects play an important role in tailoring the optoelectronic properties of materials. Here we demonstrate that sulphur vacancies are able to engineer sub-band photoresponse into the short-wave infrared range due to formation of in-gap states in Bi2S3 single crystals supported by density functional (DF) calculations. Sulfurization and subsequent refill of the vacancies results in faster response but limits the spectral range to the near infrared as determined by the bandgap of Bi2S3. A facile chemical treatment is then explored to accelerate the speed of sulphur deficient (SD)-based detectors on the order of 10 ms without sacrificing its spectral coverage into the infrared, while holding a high D* close to 10^15 Jones in the visible-near infrared range and 10^12 Jones at 1.6 um. This work also provides new insights into the role sulphur vacancies play on the electronic structure and, as a result, into sub-bandgap photoresponse enabling ultrasensitive, fast and broadband photodetectors., The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 725165), the Spanish Ministry of Economy and Competitiveness (MINECO), and the “Fondo Europeo de Desarrollo Regional” (FEDER) through grant TEC2017-88655-R. The authors also acknowledge financial support from Fundacio Privada Cellex, the program CERCA and from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522). Y.Y. acknowledges support from the National Natural Science Foundation of China under grant no. 61805045. S.C. acknowledges support from Marie Curie Standard European Fellowship (“NAROBAND”, H2020-MSCA-IF-2016-750600). Furthermore, the research leading to these results has received funding from the European Union H2020 Programme under grant agreement no. 785219 Graphene Flagship, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bottom-up synthesized MoS 2 interfacing polymer carbon nanodots with electrocatalytic activity for hydrogen evolution

  • Kagkoura, Antonia
  • Canton-Vitoria, Rubén
  • Vallan, Lorenzo
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
  • Tagmatarchis, Nikos
5 Figuras, 1 Esquema, 1 Tabla .-- Información suplementaria disponible en la página web del editor., The preparation of MoS 2 ‐polymer carbon nanodot (MoS 2 ‐PCND) hybrid material was accomplished by employing an easy and fast bottom‐up synthetic approach. Specifically, MoS 2 ‐PCND was realized by the thermal decomposition of ammonium tetrathiomolybdate and the in‐situ complexation of Mo with carboxylic acid units present in the surface of PCNDs. The newly prepared hybrid material was comprehensively characterized by spectroscopic, thermal and electron microscopy imaging means. The electrocatalytic activity of MoS 2 ‐PCND was examined against the hydrogen evolution reaction (HER) and compared with that attributed to the hybrid material prepared by a top‐down approach, namely with MoS 2 ‐PCND(exf‐fun), in which MoS 2 was firstly exfoliated and then covalently functionalized with PCNDs. The MoS 2 ‐PCND hybrid material showed superior electrocatalytic activity against HER with low Tafel slope value and excellent electrocatalytic stability, with an onset potential at ‐0.16 V vs RHE. The superior catalytic performance of MoS 2 ‐PCND was rationalized by considering the catalytic active sites of MoS 2 , the effective charge/energy‐transfer phenomena from PCNDs to MoS 2 and the synergetic effect between MoS 2 and PCNDs within the hybrid material., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, which is implemented under the “Reinforcement of the Research and Innovation Infrastructures”, funded by the Operational Program "Competitiveness, Entrepreneurship and Innovation" (NSRF 2014-2020) and co-financed by Ministry of Development and Investments, Greece, and the European Union (European Regional Development Fund) is also acknowledged. A.M.B. and W.K.M. acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R, AEI/FEDER, UE) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE). The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E13_17R) and from the European Union H2020 programs “ESTEEM3” (823717) and under the “Graphene Flagship” CORE2 project grant agreement No 785219., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Launching of hyperbolic phonon-polaritons in h-BN slabs by resonant metal plasmonic antennas

  • Pons Valencia, P.
  • Alfaro-Mozaz, Francisco J.
  • Wiecha, M. M.
  • Biolek, V.
  • Dolado, Irene
  • Vélez, Saül
  • Li, Peining
  • Alonso-González, Pablo
  • Casanova, Félix
  • Hueso, Luis E.
  • Martín-Moreno, Luis
  • Hillenbrand, Rainer
  • Nikitin, Alexey Y.
Launching and manipulation of polaritons in van der Waals materials offers novel opportunities for field-enhanced molecular spectroscopy and photodetection, among other applications. Particularly, the highly confined hyperbolic phonon polaritons (HPhPs) in h-BN slabs attract growing interest for their capability of guiding light at the nanoscale. An efficient coupling between free space photons and HPhPs is, however, hampered by their large momentum mismatch. Here, we show —by far-field infrared spectroscopy, infrared nanoimaging and numerical simulations— that resonant metallic antennas can efficiently launch HPhPs in thin h-BN slabs. Despite the strong hybridization of HPhPs in the h-BN slab and Fabry-Pérot plasmonic resonances in the metal antenna, the efficiency of launching propagating HPhPs in h-BN by resonant antennas exceeds significantly that of the non-resonant ones. Our results provide fundamental insights into the launching of HPhPs in thin polar slabs by resonant plasmonic antennas, which will be crucial for phonon-polariton based nanophotonic devices., The authors acknowledge financial support from the European Commission under the Graphene Flagship (GrapheneCore2), the Spanish Ministry of Science, Innovation and Universities (national projects MAT2017-88358-C3, MAT2015-65159-R, MAT2015-65525-R, RTI2018-094830-B-100, RTI2018-094861-B-100, and the project MDM-2016-0618 of the Marie de Maeztu Units of Excellence Program) the Marie Sklodowska-Curie individual fellowship (SGPCM-705960), the Basque Government (PhD fellowship PRE 2018 2 0253), and the project PIC201660E046 from CSIC. M.M.W. acknowledges support from the Konrad-Adenauer-Stiftung. P.A.G. acknowledges support from the European Research Council under Starting Grant 715496, 2DNANOPTICA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sonochemical edge functionalisation of molybdenum disulfide

  • Amorim Graf, Aline
  • Large, Matthew J.
  • Ogilvie, Sean P.
  • Rong, Yuanyang
  • Lynch, Peter J.
  • Fratta, Giuseppe
  • Ray, Santanu
  • Shmeliov, Aleksey
  • Nicolosi, Valeria
  • Arenal, Raúl
  • King, Alice A. K.
  • Dalton, Alan B.
Liquid-phase exfoliation (LPE) has been shown to be capable of producing large quantities of high-quality dispersions suitable for processing into subsequent applications. LPE typically requires surfactants for aqueous dispersions or organic solvents with high boiling point. However, they have major drawbacks such as toxicity, aggregation during solvent evaporation or the presence of residues. Here, dispersions of molybdenum disulfide in acetone are prepared and show much higher concentration and stability than predicted by Hansen parameter analysis. Aiming to understand these enhanced properties, the nanosheets were characterised using UV-visible spectroscopy, zeta potential measurements, atomic force microscopy, Raman spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and scanning transmission microscopy combined with spatially-resolved electron energy loss spectroscopy. Also, the performance of the MoS2 nanosheets exfoliated in acetone was compared to that of those exfoliated in isopropanol as a catalyst for the hydrogen evolution reaction. The conclusion from the chemical characterisation was that MoS2 nanosheets exfoliated in acetone have an oxygen edge functionalisation, in the form of molybdenum oxides, changing its interaction with solvents and explaining the observed high-quality and stability of the resulting dispersion in a low boiling point solvent. Exfoliation in acetone could potentially be applied as a pretreatment to modify the solubility of MoS2 by edge functionalisation., The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA) – Universidad de Zaragoza (Spain). This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 642742 and under the “Graphene Flagship” project grant agreement no. 785219. R. A. also acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E13_17R). VN wishes to thank the support of SFI (AMBER and I-Form centres, PIYRA and US-Ireland grants) and the ERC CoG (3D2DPrint)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sulfur-doped graphene/transition metal dichalcogenide heterostructured hybrids with electrocatalytic activity toward the hydrogen evolution reaction

  • Kagkoura, Antonia
  • Peláez-Fernández, Mario
  • Arenal, Raúl
  • Tagmatarchis, Nikos
A facile route for the preparation of molybdenum disulfide (MoS2) and tungsten disulfide (WS2), uniformly deposited onto sulfur-doped graphene (SG), is reported. The realization of the SG/MoS2 and SG/WS2 heterostructured hybrids was accomplished by employing microwave irradiation for the thermal decomposition of ammonium tetrathiomolybdate and tetrathiotungstate, respectively, in the presence of SG. Two different weight ratios between SG and the inorganic species were used, namely 3 : 1 and 1 : 1, yielding SG/MoS2 (3 : 1), SG/MoS2 (1 : 1), SG/WS2 (3 : 1) and SG/WS2 (1 : 1). SG and all newly developed hybrid materials were characterized by ATR-IR and Raman spectroscopy, TGA, HR-TEM and EELS. The electrocatalytic activity of the SG/MoS2 and SG/WS2 heterostructured hybrids was examined against the hydrogen evolution reaction (HER) and it was found that the presence of SG not only significantly improved the catalytic activity of MoS2 and WS2 but also made it comparable to that of commercial Pt/C. Specifically, hybrids containing higher amounts of SG, namely SG/MoS2 (3 : 1) and SG/WS2 (3 : 1), exhibited extremely low onset overpotentials of 26 and 140 mV vs. RHE, respectively. The latter results highlighted the beneficial role of SG as a substrate for immobilizing MoS2 and WS2 and stressed its significance for achieving optimum electrocatalytic performance toward the HER. Finally, examination of the Tafel slopes as extracted from the electrocatalytic polarization curves, manifested the adsorption of hydrogen as the rate-limiting step for SG/MoS2 (3 : 1), while for SG/WS2 (3 : 1) the electrochemical desorption of adsorbed hydrogen atoms to generate hydrogen was revealed to be the rate-limiting step., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 642742. Partial support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014-2020) and co-financed by Greece and the European Union (European Regional Development Fund) is also acknowledged. The HR-TEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R. A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project MAT2016-79776-P (AEF/FEDER. UE), the Government of Aragon and ESF under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E13_17R), and from the EU H2020 program “Graphene Flagship” (Grant Agreement 785219)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal conductivity and phonon hydrodynamics in transition metal dichalcogenides from first-principles

  • Torres, Pol
  • Alvarez, Francesc Xavier
  • Cartoixà, Xavier
  • Rurali, Riccardo
We carry out a systematic study of the thermal conductivity of four single-layer transition metal dichalcogenides, MX2 (M = Mo, W; X = S, Se) from first-principles by solving the Boltzmann transport equation (BTE). We compare three different theoretical frameworks to solve the BTE beyond the relaxation time approximation (RTA), using the same set of interatomic force constants computed within density functional theory (DFT), finding that the RTA severely underpredicts the thermal conductivity of MS2 materials. Calculations of the different phonon scattering relaxation times of the main collision mechanisms and their corresponding mean free paths (MFP) allow evaluating the expected hydrodynamic behaviour in the heat transport of such monolayers. These calculations indicate that despite of their low thermal conductivity, the present TMDs can exhibit large hydrodynamic effects, being comparable to those of graphene, especially for WSe2 at high temperatures., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Transmission electron microscopy investigation of graphene oxide flakes

  • Hettler, Simon
  • Valenzuela, David S.
  • Arenal, Raúl
Resumen del póster presentado al Microscopy at the Frontiers of Science Congress Series (MFS), celebrado en el Parque de las Ciencias de Granada (España) del 11 al 13 de septiembre de 2019., A significant amount of research has been done on (reduced) graphene oxide ((r)GO) due to its controllable properties and because it is widely used as a starting point for graphene production and functionalization. Although the chemical model of GO is very complex, it is well established that its properties are mainly controlled by the different functional groups present, the percentage of incorporated oxygen and the ratio between sp2 and sp3-hybridized C bonds. Here we present our experimental results on transmission electron microscopy (TEM) investigation of GO acquired with an image-corrected FEI Titan3 operated at 80 kV. Using TEM imaging, electron diffraction and electron energy-loss spectroscopy (EELS), GO can be characterized in detail and properties such as composition, size, thickness or fraction of sp2-hybridized C bonds can be determined with high spatial resolution. Three EEL spectra showing the background-corrected C-K edge of different GO flakes are depicted in Figure 1. The C-K edge exhibits a sharp pre-peak at 285 eV, whose intensity corresponds to the fraction of sp2-hybridized C bonds, followed by a set of peaks associated to different oxidized functional groups and a broad peak starting at 290 eV. While the black line shows a spectra of a highly oxidized flake (17 %), the red and green curve were obtained from flakes with a low oxygen content. In summary, TEM-EELS is highly suited for an in-depth analysis of GO. The obtained information on structure, composition and alien material present in the GO allows to better understand the macroscopic properties of GO and its use in applications., Research supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), Government of Aragon through project DGA E13_17R (FEDER, EU) and European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC 2017) and Graphene Flagship (785219).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fast and sensitive terahertz detection using an antenna-integrated graphene pn junction

  • Castilla, Sebastián
  • Terrés, Bernat
  • Autore, Marta
  • Viti, Leonardo
  • Li, Jian
  • Nikitin, Alexey Y.
  • Vangelidis, Ioannis
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Lidorikis, Elefterios
  • Vitiello, Miriam S.
  • Hillenbrand, Rainer
  • Tielrooij, Klaas-Jan
  • Koppens, Frank H. L.
Although the detection of light at terahertz (THz) frequencies is important for a large range of applications, current detectors typically have several disadvantages in terms of sensitivity, speed, operating temperature, and spectral range. Here, we use graphene as a photoactive material to overcome all of these limitations in one device. We introduce a novel detector for terahertz radiation that exploits the photothermoelectric (PTE) effect, based on a design that employs a dual-gated, dipolar antenna with a gap of ∼100 nm. This narrow-gap antenna simultaneously creates a pn junction in a graphene channel located above the antenna and strongly concentrates the incoming radiation at this pn junction, where the photoresponse is created. We demonstrate that this novel detector has an excellent sensitivity, with a noise-equivalent power of 80 pW/ at room temperature, a response time below 30 ns (setup-limited), a high dynamic range (linear power dependence over more than 3 orders of magnitude) and broadband operation (measured range 1.8–4.2 THz, antenna-limited), which fulfills a combination that is currently missing in the state-of-the-art detectors. Importantly, on the basis of the agreement we obtained between experiment, analytical model, and numerical simulations, we have reached a solid understanding of how the PTE effect gives rise to a THz-induced photoresponse, which is very valuable for further detector optimization., F.H.L.K. acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centres of Excellence in R&D (SEV-2015-0522), support by Fundacio Cellex Barcelona, Generalitat de Catalunya through the CERCA program, and the Agency for Management of University and Research Grants (AGAUR) 2017 SGR 1656. Furthermore, the research leading to these results has received funding from the European Union Seventh Framework Program under grant agreement no.785219 Graphene Flagship (Core2). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706). K.-J.T. acknowledges support from a Mineco Young Investigator Grant (FIS2014-59639-JIN). S.C. acknowledges funding from the Barcelona Institute of Science and Technology (BIST), the Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la Generalitat de Catalunya and the European Social Fund, FEDER. M.S.V. acknowledges financial support from the ERC Project 681379 (SPRINT) and partial support from the second half of the Balzan Prize 2016 in applied photonics delivered to Federico Capasso. A.Y.N. acknowledges funding from the Spanish Ministry of Economy, Industry and Competitiveness, national project MAT2017-88358-C3-3-R. R.H. acknowledges financial support from the Spanish Ministry of Economy and Competitiveness through the project MDM-2016-0618 of the Maria de Maeztu Units of Excellence Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Room-temperature spin hall effect in graphene/MoS 2 van der Waals heterostructures

  • Safeer, C. K.
  • Ingla-Aynes, Josep
  • Herling, Franz
  • Garcia, Jose H.
  • Vila, Marc
  • Ontoso, Nerea
  • Calvo, M. Reyes
  • Roche, Stephan
  • Hueso, Luis E.
  • Casanova, Fèlix
Graphene is an excellent material for long-distance spin transport but allows little spin manipulation. Transition-metal dichalcogenides imprint their strong spin-orbit coupling into graphene via the proximity effect, and it has been predicted that efficient spin-to-charge conversion due to spin Hall and Rashba-Edelstein effects could be achieved. Here, by combining Hall probes with ferromagnetic electrodes, we unambiguously demonstrate experimentally the spin Hall effect in graphene induced by MoS2 proximity and for varying temperatures up to room temperature. The fact that spin transport and the spin Hall effect occur in different parts of the same material gives rise to a hitherto unreported efficiency for the spin-to-charge voltage output. Additionally, for a single graphene/MoS2 heterostructure-based device, we evidence a superimposed spin-to-charge current conversion that can be indistinguishably associated with either the proximity-induced Rashba-Edelstein effect in graphene or the spin Hall effect in MoS2. By a comparison of our results to theoretical calculations, the latter scenario is found to be the most plausible one. Our findings pave the way toward the combination of spin information transport and spin-to-charge conversion in two-dimensional materials, opening exciting opportunities in a variety of future spintronic applications., This work is supported by the Spanish MINECO under the Maria de Maeztu Units of Excellence Programme (MDM-2016-0618) and under projects MAT2015-65159-R and MAT2017-82071-ERC and by the European Union H2020 under the Marie Curie Actions (QUESTECH). The work in ICN2 is supported by Spanish MINECO under Severo Ochoa program (Grant No. Sev-2017-0706). S.R. and J.H.G. acknowledge support from the European Union Seventh Framework Programme under grant agreement no. 785219 Graphene Flagship and the computational resources from PRACE and the Barcelona Supercomputing Center (project no. 2015133194). M. V. acknowledges funding received from la Caixa foundation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Velocity saturation effect on low frequency noise in short channel single layer graphene field effect transistors

  • Mavredakis, Nikolaos
  • Wei, Wei
  • Pallecchi, Emiliano
  • Vignaud, Dominique
  • Happy, Henry
  • Garcia Cortadella, Ramon
  • Bonaccini Calia, Andrea
  • Garrido, Jose A.
  • Jiménez, David
Graphene devices for analog and radio frequency (RF) applications are prone to low frequency noise (LFN) due to its up conversion to undesired phase noise at higher frequencies. Such applications demand the use of short channel graphene transistors (GFETs) that operate at high electric fields in order to ensure a high speed. Electric field is inversely proportional to device length and proportional to channel potential, so it gets maximized as the drain voltage increases and the transistor's length shrinks. Under these conditions though, short channel effects like velocity saturation (VS) should be considered. The reduction of LFN data due to the VS effect at short channel GFETs operating at high drain potential is for the first time shown in the present work. Carrier number and mobility fluctuations have been proven to be the main sources that generate LFN in GFETs. While their contribution to the bias dependence of LFN in long channels has been thoroughly investigated, the way in which VS phenomenon affects LFN in short channel devices under high drain voltage conditions has not been well understood. In this paper we have proposed a physics-based analytical LFN model that works under both low and high electric field conditions. The implemented model is validated with experimental data from CVD grown back-gated single layer GFETs operating at gigahertz frequencies. The model accurately captures the reduction of LFN especially near the charge neutrality point because of the effect of the VS mechanism. Moreover, an analytical expression for the effect of contact resistance on LFN is derived. This contact resistance contribution is experimentally shown to be dominant at high gate voltages and is accurately described by the proposed model. The noise parameter related to LFN at contacts is found to have an exponential dependence with contact resistance, and to our knowledge, this is shown for the first time., This work was funded by the Ministerio de Economía y Competitividad under the project TEC2015-67462-C2-1-R and the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. GrapheneCore2 785219 (Graphene Flagship), Marie Skłodowska-Curie Grant Agreement No 665919 and Grant Agreement No. 732032 (BrainCom). This work was also partly supported by the French RENATECH network. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct transformation of crystalline MoO3 into few-layers MoS2

  • Carrascoso Plana, Félix
  • Sanchez-Santolino, Gabriel
  • Hsu, Chun-wei
  • Nemes, N. M.
  • Torres-Pardo, Almudena
  • Gant, Patricia
  • Mompean, Federico J.
  • Kalantar-Zadeh, Kourosh
  • Alonso, J. A.
  • García-Hernández, Mar
  • Frisenda, Riccardo
  • Castellanos-Gómez, Andrés
We fabricated large-area atomically thin MoS2 layers through the direct transformation of crystalline molybdenum trioxide (MoO3) by sulfurization at relatively low temperatures. The obtained MoS2 sheets are polycrystalline (~10–20 nm single-crystal domain size) with areas of up to 300 × 300 µm2, 2–4 layers in thickness and show a marked p-type behavior. The synthesized films are characterized by a combination of complementary techniques: Raman spectroscopy, X-ray diffraction, transmission electron microscopy and electronic transport measurements., ACG acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement n° 755655, ERC-StG 2017 project 2D-TOPSENSE) and from the EU Graphene Flagship funding (Grant Graphene Core 2, 785219). JAA thanks the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) for funding the project MAT2017-84496-R. RF acknowledges support from MINECO through a “Juan de la Cierva: formación” fellowship (2017 FJCI-2017-32919). GSS acknowledges financial support from MINECO (Juan de la Cierva 2015 program, FJCI-2015-25427)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic proximity in a van der Waals heterostructure of magnetic insulator and graphene

  • Karpiak, Bogdan
  • Cummings, Aron W.
  • Zollner, Klaus
  • Vila, Marc
  • Khokhriakov, Dmitrii
  • Hoque, Anamul Md.
  • Dankert, André
  • Svedlindh, Peter
  • Fabian, Jaroslav
  • Roche, Stephan
Engineering 2D material heterostructures by combining the best of different materials in one ultimate unit can offer a plethora of opportunities in condensed matter physics. Here, in the van der Waals heterostructures of the ferromagnetic insulator Cr2Ge2Te6 and graphene, our observations indicate an out-of-plane proximity-induced ferromagnetic exchange interaction in graphene. The perpendicular magnetic anisotropy of Cr2Ge2Te6 results in significant modification of the spin transport and precession in graphene, which can be ascribed to the proximity-induced exchange interaction. Furthermore, the observation of a larger lifetime for perpendicular spins in comparison to the in-plane counterpart suggests the creation of a proximity-induced anisotropic spin texture in graphene. Our experimental results and density functional theory calculations open up opportunities for the realization of proximity-induced magnetic interactions and spin filters in 2D material heterostructures and can form the basic building blocks for future spintronic and topological quantum devices., Authors from Chalmers, ICN2, and University of Regensburg acknowledge funding from the European Union's Horizon 2020 research and innovation programme under Grant agreement no. 785219 (Graphene Flagship Core 2). The authors at Chalmers acknowledge financial support from EU FlagEra project (from Swedish Research Council VR No. 2015-06813), Swedish Research Council VR project Grants (No. 2016-03658), Graphene center and the AoA Nano program at Chalmers University of Technology. We acknowledge Dr Ron Jansen for useful discussions about proximity-induced exchange and stray Hall effects in the heterostructures. We acknowledge help from Bing Zhao in our group and staff at Nanofabrication laboratory and Quantum device laboratory for useful discussions and help in fabrication and measurements of devices. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya and is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). M. Vila acknowledges funding from 'La Caixa' Foundation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nonlocal spin dynamics in the crossover from diffusive to ballistic transport

  • Vila, Marc
  • Garcia, Jose H.
  • Cummings, Aron W.
  • Power, Stephen R.
  • Groth, Christoph W.
  • Waintal, X.
  • Roche, Stephan
Improved fabrication techniques have enabled the possibility of ballistic transport and unprecedented spin manipulation in ultraclean graphene devices. Spin transport in graphene is typically probed in a nonlocal spin valve and is analyzed using spin diffusion theory, but this theory is not necessarily applicable when charge transport becomes ballistic or when the spin diffusion length is exceptionally long. Here, we study these regimes by performing quantum simulations of graphene nonlocal spin valves. We find that conventional spin diffusion theory fails to capture the crossover to the ballistic regime as well as the limit of long spin diffusion length. We show that the latter can be described by an extension of the current theoretical framework. Finally, by covering the whole range of spin dynamics, our study opens a new perspective to predict and scrutinize spin transport in graphene and other two-dimensional material-based ultraclean devices., M. V. acknowledges support from “La Caixa” Foundation. S. R. P. acknowledges funding from the Irish Research Council under the Laureate awards programme. X. W. acknowledges the ANR GRANSPORT funding. All authors were supported by the European Union Horizon 2020 research and innovation programme under Grant Agreement No. 785219 (Graphene Flagship). ICN2 is funded by the CERCA Programme/Generalitat de Catalunya, and is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ping‐pong energy transfer in covalently linked porphyrin‐MoS2 architectures

  • Canton-Vitoria, Rubén
  • Scharl, Tobias
  • Stergiou, Anastasios
  • Cadranel, Alejandro
  • Arenal, Raúl
  • Guldi, Dirk M.
  • Tagmatarchis, Nikos
Molybdenum disulfide nanosheets covalently modified with porphyrin were prepared and fully characterized. Neither the porphyrin absorption nor its fluorescence was notably affected by covalent linkage to MoS2. The use of transient absorption spectroscopy showed that a complex ping‐pong energy‐transfer mechanism, namely from the porphyrin to MoS2 and back to the porphyrin, operated. This study reveals the potential of transition‐metal dichalcogenides in photosensitization processes., This project has received funding from EC H2020 under the Marie Sklodowska‐Curie grant agreement No. 642742. HRSTEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016‐79776‐P (AEI/FEDER, UE) and from EC H2020 programs “Graphene Flagship” (785219), FLAG‐ERA—“GATES” (JTC‐PCI2018‐093137) and “ESTEEM3” (823717). R.A. also acknowledges Government of Aragon under the project “Construyendo Europa desde Aragon” 2014‐2020 (grant number E13_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pyrene coating transition metal disulfides as protection from photooxidation and environmental aging

  • Canton-Vitoria, Rubén
  • Sayed-Ahmad-Baraza, Yuman
  • Humbert, Bernard
  • Arenal, Raúl
  • Ewels, Christopher P.
  • Tagmatarchis, Nikos
This article belongs to the Section Nanocomposite Materials., Environmental degradation of transition metal disulfides (TMDs) is a key stumbling block in a range of applications. We show that a simple one-pot non-covalent pyrene coating process protects TMDs from both photoinduced oxidation and environmental aging. Pyrene is immobilized non-covalently on the basal plane of exfoliated MoS2 and WS2. The optical properties of TMD/pyrene are assessed via electronic absorption and fluorescence emission spectroscopy. High-resolution scanning transmission electron microscopy coupled with electron energy loss spectroscopy confirms extensive pyrene surface coverage, with density functional theory calculations suggesting a strongly bound stable parallel-stacked pyrene coverage of ~2–3 layers on the TMD surfaces. Raman spectroscopy of exfoliated TMDs while irradiating at 0.9 mW/4 μm2 under ambient conditions shows new and strong Raman bands due to oxidized states of Mo and W. Yet remarkably, under the same exposure conditions TMD/pyrene remain unperturbed. The current findings demonstrate that pyrene physisorbed on MoS2 and WS2 acts as an environmental barrier, preventing oxidative surface reactions in the TMDs catalyzed by moisture, air, and assisted by laser irradiation. Raman spectroscopy confirms that the hybrid materials stored under ambient conditions for two years remained structurally unaltered, corroborating the beneficial role of pyrene for not only hindering oxidation but also inhibiting aging., This research was funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742, under the “Graphene Flagship” project grant agreement No 785219 and under the ESTEEM-3 project grant agreement No 823717. This research was also partially funded by the project “Advanced Materials and Devices” (MIS 5002409), which is implemented under the “Action for the Strategic Development on the Research and Technological Sector” funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014–2020) and co-financed by Greece and the European Union (European Regional Development Fund). This work was supported by the COST Action CA15107 MultiComp. This research was also supported by the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E13_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Experimental demonstration of the suppression of optical phonon splitting in 2D materials by Raman spectroscopy

  • De Luca, Marta
  • Cartoixà, Xavier
  • Indolese, David I.
  • Martín-Sánchez, Javier
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Schönenberger, Christian
  • Trotta, Rinaldo
  • Rurali, Riccardo
  • Zardo, Ilaria
Raman spectroscopy is one of the most extended experimental techniques to investigate thin-layered 2D materials. For a complete understanding and modeling of the Raman spectrum of a novel 2D material, it is often necessary to combine the experimental investigation to density functional theory calculations. We provide the experimental proof of the fundamentally different behavior of polar 2D vs 3D systems regarding the effect of the dipole − dipole interactions, which in 2D systems ultimately lead to the absence of optical phonons splitting, otherwise present in 3D materials. We demonstrate that non-analytical corrections (NACs) should not be applied to properly model the Raman spectra of few-layered 2D materials, such as WSe2 and h-BN, corroborating recent theoretical predictions (Sohier et al 2017 Nano Lett. 17 3758–63). Our findings are supported by measurements performed on tilted samples that allow increasing the component of photon momenta in the plane of the flake, thus unambiguously setting the direction of an eventual NAC. We also investigate the influence of the parity of the number of layers and of the type of layer-by-layer stacking on the effect of NACs on the Raman spectra., I Z acknowledges the Swiss National Science Foundation research grant (Project Grant No. 200021_165784). M D L acknowledges support from the Swiss National Science Foundation Ambizione grant (Grant No. PZ00P2_179801). R R acknowledges support from the Ministerio de Economía, Industria y Competitividad (MINECO) under grant FEDER-MAT2017-90024-P and the Severo Ochoa Centres of Excellence Program under grant SEV-2015-0496 and by the Generalitat de Catalunya under Grant Nos. 2017 SGR 1506. X C acknowledges financial support by the Ministerio de Economía, Industria y Competitividad under grant TEC2015-67462-C2-1-R (MINECO/FEDER), the Ministerio de Ciencia, Innovación y Universidades under Grant No. RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), and the EU Horizon2020 research and innovation program under Grant No. GrapheneCore2: 785219. C S and D I acknowledge support by the Swiss Nanoscience Institute (SNI), the ERC project TopSupra (787414), the European Union Horizon 2020 research and innovation program under grant agreement No. 785219 (Graphene Flagship), the Swiss National Science Foundation and the Swiss NCCR QSIT. J.M.-S. acknowledges support through a Clarín Marie Curie-COFUND grant from the Government of the Principality of Asturias and the EU (PA-18-ACB17-29), and the Ramón y Cajal Program (RYC2018-026196-I) from the Government of Spain. R T acknowledges support by European Union's Horizon 2020 research and innovation programme (SPQRel grant agreement no. 679183). K W and T T acknowledge support from the Elemental Strategy Initiative conducted by the MEXT, Japan and the CREST(JPMJCR15F3), JST., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New insights in the lattice dynamics of monolayers, bilayers, and trilayers of WSe2 and unambiguous determination of few-layer-flakes' thickness

  • De Luca, Marta
  • Cartoixà, Xavier
  • Martín-Sánchez, Javier
  • López Suárez, Miquel
  • Trotta, Rinaldo
  • Rurali, Riccardo
  • Zardo, Ilaria
Among the most common few-layers transition metal dichalcogenides (TMDs), WSe2 is the most challenging material from the lattice dynamics point of view. Indeed, for a long time the main two phonon modes (A1g and ) have been wrongly assigned. In the last few years, these two modes have been properly interpreted, and their quasi-degeneracy in the monolayer has been used for its identification. In this work, we show that this approach has a limited validity and we propose an alternative, more general approach, based on multi-phonon bands. Moreover, we show and interpret all the peaks (about 40) appearing in the Raman spectra of monolayers, bilayers, and trilayers of WSe2 by combining experimental wavelength- and polarization-dependent Raman studies with density-functional theory calculations providing the phonon dispersions, the polarization-resolved first-order Raman spectra, and the two-phonon density of states. This complete study not only offers a method to distinguish between monolayers, bilayers, and trilayers with no need of optical images and atomic force microscopy, but it also sheds light on the interpretation of single and multi-phonon bands appearing in the inelastic light scattering experiments of layered WSe2; some of these bands were never observed before, and some were observed and uncertainly assigned. We promote the full understanding of the lattice dynamics of this material that is crucial for the realization of optoelectronics devices and of novel phononic metamaterials, such as TMDs superlattices., This project has received funding from the Swiss National Science Foundation research grant (Project Grant No. 200021_165784). MDL acknowledges support from the Swiss National Science Foundation Ambizione grant (Grant No. PZ00P2_179801). RR acknowledges financial support by the Ministerio de Economía, Industria y Competitividad (MINECO) under grant FEDER-MAT2017-90024-P and the Severo Ochoa Centres of Excellence Program under grant SEV-2015-0496 and by the Generalitat de Catalunya under Grant No. 2017 SGR 1506. XC acknowledges financial support by the Ministerio de Economía, Industria y Competitividad under grant TEC2015-67462-C2-1-R (MINECO/FEDER), the Ministerio de Ciencia, Innovación y Universidades under Grant No. RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), and the EU Horizon2020 research and innovation program under Grant No. GrapheneCore2 785219. MLS is funded through a Juan de la Cierva fellowship. JM-S acknowledges support through the Clarín Programme from the Government of the Principality of Asturias and a Marie Curie-COFUND European Grant (PA-18-ACB17-29). RT Acknowledges support by European Union's Horizon 2020 research and innovation programme (SPQRel Grant Agreement No. 679183)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Investigating the spin-orbit interaction in van der Waals heterostructures by means of the spin relaxation anisotropy

  • Benítez, L. Antonio
  • Sierra, Juan F.
  • Savero Torres, Williams
  • Timmermans, Matias
  • Costache, Marius V.
  • Valenzuela, Sergio O.
Graphene offers long spin propagation and, at the same time, a versatile platform to engineer its physical properties. Proximity-induced phenomena, taking advantage of materials with large spin-orbit coupling or that are magnetic, can be used to imprint graphene with large spin-orbit coupling and magnetic correlations. However, full understanding of the proximitized graphene and the consequences on the spin transport dynamics requires the development of unconventional experimental approaches. The investigation of the spin relaxation anisotropy, defined as the ratio of lifetimes for spins pointing out of and in the graphene plane, is an important step in this direction. This review discusses various methods for extracting the spin relaxation anisotropy in graphene-based devices. Within the experimental framework, current understanding on spin transport dynamics in single-layer and bilayer graphene is presented. Due to increasing interest, experimental results in graphene in proximity with high spin-orbit layered materials are also reviewed., This research was supported by the European Union’s Horizon 2020 research and innovation programme Graphene Flagship Core 1 and 2 under Grant Agreement Nos. 696656 and 785219, respectively, by the European Research Council under grant agreement 306652 SPINBOUND, by the Spanish Ministry of Economy and Competitiveness, MINECO (Grant Nos. MAT2016-75952-R and SEV2017-0706 Severo Ochoa), and by the CERCA Programme and the Secretariat for Universities and Research, Knowledge Department of the Generalitat de Catalunya 2017 SGR 827., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Universal spin diffusion length in polycrystalline graphene

  • Cummings, Aron W.
  • Dubois, Simon M.-M.
  • Charlier, Jean-Christopher
  • Roche, Stephan
Graphene grown by chemical vapor deposition (CVD) is the most promising material for industrial-scale applications based on graphene monolayers. It also holds promise for spintronics; despite being polycrystalline, spin transport in CVD graphene has been measured over lengths up to 30 μm, which is on par with the best measurements made in single-crystal graphene. These results suggest that grain boundaries (GBs) in CVD graphene, while impeding charge transport, may have little effect on spin transport. However, to date very little is known about the true impact of disordered networks of GBs on spin relaxation. Here, by using first-principles simulations, we derive an effective tight-binding model of graphene GBs in the presence of spin–orbit coupling (SOC), which we then use to evaluate spin transport in realistic morphologies of polycrystalline graphene. The spin diffusion length is found to be independent of the grain size, and it is determined only by the strength of the substrate-induced SOC. This result is consistent with the D’yakonov–Perel’ mechanism of spin relaxation in the diffusive regime, but we find that it also holds in the presence of quantum interference. These results clarify the role played by GBs and demonstrate that the average grain size does not dictate the upper limit for spin transport in CVD-grown graphene, a result of fundamental importance for optimizing large-scale graphene-based spintronic devices., All authors acknowledge support from the European Union Horizon 2020 Programme under Grant Agreement Nos. 696656 and 785219 (Graphene Flagship Core 1 and Core 2). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and funded by the CERCA Programme/Generalitat de Catalunya. S.M.-M.D and J.-C.C. acknowledge the National Fund for Scientific Research of Belgium [F.R.S.- FNRS] and the Fédération Wallonie-Bruxelles through the “3D nanoarchitecturing of 2D crystals” project (ARC - 16/21-077) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multifunctional copper(I) coordination polymers with aromatic mono- and ditopic thioamides

  • Troyano, Javier
  • Zapata, Eduardo
  • Perles, Josefina
  • Amo-Ochoa, Pilar
  • Fernández-Moreira, Vanesa
  • Martínez, José I.
  • Zamora, Félix
  • Delgado, Salomé
Direct reactions under ambient conditions between CuX (X = Br, I) and thiobenzamide (TBA) were carried out at different ratios, giving rise to the formation of a series of one-dimensional (1D) coordination polymers, (CPs) [CuI(TBA)]n (1), [Cu3I3(TBA)2]n (4), and [CuBr(TBA)]n (5), as well as two molecular complexes, [CuI(TBA)3] (2) and [Cu2I2(TBA)4]·2MeCN (3). Recrystallization of 1 and 5 yielded a series of isostructural 1D CP solvated species, [CuI(TBA)·S]n]n (1·S; S = tetrahydrofuran, acetone, methanol) and [CuBr(TBA)·S]n (5·S; S = tetrahydrofuran, acetone), respectively. Similar reactions between CuI and 1,4-dithiobenzamide (DTBA) allowed the isolation of a series of two-dimensional (2D) CPs [CuI(DTBA)·S]n (6·S; S = N,N-dimethylformamide, acetonitrile, methanol). Interestingly, 1·S and 5·S showed variable luminescence and electrical semiconductivity depending on the different solvents located in their structures. Thus, 1 and 5 could display potential application for sensing volatile organic vapors by virtue of the significant changes in their emission upon solvent exposure, even by the naked eye. Theoretical calculations have been used to rationalize these electronic properties., MINECO (Grants MAT2016-77608-C3-1-P, MAT2016-75883-C2-1-P, and MAT2017-85089-C2-1-R; Ramon y Cajal, Grant RYC-2015-17730), Ministerio de Ciencia, Innovación y Universidades (Grant CTQ2016-75816-C2-1-P), and European Union’s Horizon 2020 research and innovation programme (Grant 785219; Graphene Flagship–core2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailored graphenic structures directly grown on titanium oxide boost the interfacial charge transfer

  • Muñoz, Roberto
  • Sánchez-Sánchez, Carlos
  • Merino, Pablo
  • López-Elvira, Elena
  • Munuera, C.
  • Gant, Patricia
  • López, María Francisca
  • Castellanos-Gómez, Andrés
  • Martín-Gago, José A.
  • García-Hernández, Mar
10 pags., 8 figs., 1 tab., The successful application of titanium oxide-graphene hybrids in the fields of photocatalysis, photovoltaics and photodetection strongly depends on the interfacial contact between both materials. The need to provide a good coupling between the enabling conductor and the photoactive phase prompted us to directly grow conducting graphenic structures on TiO crystals. We here report on the direct synthesis of tailored graphenic structures by using Plasma Assisted Chemical Vapour Deposition that present a clean junction with the prototypical titanium oxide (1 1 0) surface. Chemical analysis of the interface indicates chemical bonding between both materials. Photocurrent measurements under UV light illumination manifest that the charge transfer across the interface is efficient. Moreover, the influence of the synthesis atmosphere, gas precursor (CH) and diluents (Ar, O), on the interface and on the structure of the as-grown graphenic material is assessed. The inclusion of O promotes vertical growth of partially oxidized carbon nanodots/rods with controllable height and density. The deposition with Ar results in continuous graphenic films with low resistivity (ρ = 6.8 · 10 Ω·m). The synthesis protocols developed here are suitable to produce tailored carbon-semiconductor structures on a variety of practical substrates as thin films, pillars or nanoparticles., We acknowledge funding from the Spanish MINECO (Grants MAT2014-54231-C4-1-P, MAT2013-47898-C2-2-R and MAT2017-85089-C2-1-R), the EU via the ERC-Synergy Program (Grant ERC-2013-SYG-610256 NANOCOSMOS), the innovation program under grant agreement No. 696656 (Graphene Core1-Graphene-based disruptive technologies) and grant agreement No. 785219 (Graphene Core2-Graphene-based disruptive technologies) and the Comunidad Autónoma de Madrid (CAM) MAD2D-CM Program (S2013/MIT-3007and P2018/NMT-4367). C.S.S. acknowledges Juan de la Cierva program (IJCI-2014-19291). A.C.-G. acknowledges to grant agreement n°755655, ECR-StG 2017 project 2D-TOPSENSE.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anharmonicity and doping melt the charge density wave in single-layer TiSe2

  • Zhou, Jianqiang Sky
  • Monacelli, Lorenzo
  • Bianco, Raffaello
  • Errea, Ion
  • Mauri, Francesco
  • Calandra, Matteo
arXiv:1910.12709v1, Low-dimensional systems with a vanishing band gap and a large electron−hole interaction have been proposed to be unstable toward exciton formation. As the exciton binding energy increases in low dimension, conventional wisdom suggests that excitonic insulators should be more stable in 2D than in 3D. Here we study the effects of the electron−hole interaction and anharmonicity in single-layer TiSe2. We find that, contrary to the bulk case and to the generally accepted picture, in single-layer TiSe2, the electron−hole exchange interaction is much smaller in 2D than in 3D and it has weak effects on phonon spectra. By calculating anharmonic phonon spectra within the stochastic self-consistent harmonic approximation, we obtain TCDW ≈ 440 K for an isolated and undoped single layer and TCDW ≈ 364 K for an electron-doping n = 4.6 × 1013 cm−2 , close to the experimental result of 200−280 K on supported samples. Our work demonstrates that anharmonicity and doping melt the charge density wave in singlelayer TiSe2., Computational resources were granted by PRACE (Project No. 2017174186) and from IDRIS, CINES, and TGCC (Grant eDARI 91202 and Grand Challenge Jean Zay). We acknowledge support from the Graphene Flaghisp core 2 (Grant No. 785219) and Agence nationale de la recherche (Grant No. ANR-19-CE24-0028). F.M. and L.M. acknowledge support by the MIUR PRIN-2017 program, Project No. 2017Z8TS5B. I.E. acknowledges financial support from the Spanish Ministry of Economy and Competitiveness (FIS2016- 76617-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

2-dimensional materials-based electrical/optical platforms for smart on-off diagnostics applications

  • Kou, Jing
  • Nguyen, Emily P.
  • Merkoçi, Arben
  • Guo, Zhenzhong
The concept of two-dimensional (2D) materials was first proposed after the first successful separation of graphene, a monoatomic layered material. 2D materials are referred to materials in which electrons can only move freely on the nanoscale in two dimensions, and have expanded to also include the transition metal dichalcogenides (TMDs), black phosphorus (BP) and hexagonal boron nitride (hBN). Different 2D materials have unique electrical or optical characteristics due to the special properties of the crystal structure, and are widely used as field-effect transistors and optoelectronic devices. Moreover, based on the electrochemical and fluorescence quenching properties, many researchers have developed and fabricated light-switching and current-switching sensors for various medical diagnostics. In this paper, we summarize the characteristics of 2D materials and introduce their photoelectric properties, and review the recent applications of 2D materials based switching sensors for the diagnosis of various diseases., The authors are thankful for the support of the ‘ChuTian Scholar’ Project Award, China; Hubei Province Introduction of Foreign Talents Project, China (No. 2); Foreign Expert Project of the Ministry of Science and Technology, China (No. G20190227002). E. P. Nguyen acknowledges the EU´s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement no. 754510. ICN2 is funded by the CERCA programme / Generalitat de Catalunya and the Severo Ochoa Centres of Excellence programme and by the Spanish Research Agency (AEI, grant no. SEV-2017-0706) . EU GRAPHENE FLAGSHIP Core 3 (Reference: 785219) also is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures

  • Khenkin, Mark V.
  • Katz, Eugene A.
  • Abate, Antonio
  • Bardizza, Giorgio
  • Berry, Joseph J.
  • Brabec, Christoph
  • Brunetti, Francesca
  • Bulović, Vladimir
  • Burlingame, Quinn
  • Di Carlo, Aldo
  • Cheacharoen, Rongrong
  • Cheng, Yi-Bing
  • Colsmann, Alexander
  • Cros, Stephane
  • Domanski, Konrad
  • Dusza, Michal
  • Fell, Christopher J.
  • Forrest, Stephen R.
  • Galagan, Yulia
  • di Girolamo, Diego
  • Grätzel, Michael
  • Hagfeldt, Anders
  • Hauff, Elizabeth von
  • Hoppe, Harald
  • Kettle, Jeff
  • Köbler, Hans
  • Leite, Marina S.
  • Liu, Shengzhong
  • Loo, Yueh-Lin
  • Luther, Joseph M.
  • Ma, Chang-Qi
  • Madsen, Morten
  • Manceau, Matthieu
  • Matheron, Muriel
  • McGehee, Michael
  • Meitzner, Rico
  • Nazeeruddin, Mohammad Khaja
  • Nogueira, Ana Flavia
  • Odabaşi, Çağla
  • Osherov, Anna
  • Park, Nam-Gyu
  • Reese, Matthew O.
  • Rossi, Francesca de
  • Saliba, Michael
  • Schubert, Ulrich S.
  • Snaith, Henry J.
  • Stranks, Samuel D.
  • Tress, Wolfgang
  • Troshin, Pavel
  • Turkovic, Vida
  • Veenstra, Sjoerd
  • Visoly-Fisher, Iris
  • Walsh, Aron
  • Watson, Trystan
  • Xie, Haibing
  • Yıldırım, Yamazan
  • Zakeeruddin, Shaik Mohammed
  • Zhu, Kai
  • Lira-Cantú, Mónica
Improving the long-term stability of perovskite solar cells is critical to the deployment of this technology. Despite the great emphasis laid on stability-related investigations, publications lack consistency in experimental procedures and parameters reported. It is therefore challenging to reproduce and compare results and thereby develop a deep understanding of degradation mechanisms. Here, we report a consensus between researchers in the field on procedures for testing perovskite solar cell stability, which are based on the International Summit on Organic Photovoltaic Stability (ISOS) protocols. We propose additional procedures to account for properties specific to PSCs such as ion redistribution under electric fields, reversible degradation and to distinguish ambient-induced degradation from other stress factors. These protocols are not intended as a replacement of the existing qualification standards, but rather they aim to unify the stability assessment and to understand failure modes. Finally, we identify key procedural information which we suggest reporting in publications to improve reproducibility and enable large data set analysis., This article is based upon work from COST Action StableNextSol MP1307 supported by COST (European Cooperation in Science and Technology). M.V.K., E.A.K., V.B. and A.O. thank the financial support of the United States – Israel Binational Science Foundation (grant no. 2015757). E.A.K., A.A. and I.V.-F. acknowledge partial support from the SNaPSHoTs project in the framework of the German-Israeli bilateral R&D cooperation in the field of applied nanotechnology. M.S.L. thanks the financial support of National Science Foundation (ECCS, award #1610833). S.C., M.Manceau and M.Matheron thank the financial support of European Union’s Horizon 2020 research and innovation programme under grant agreement no 763989 (APOLO project). F.D.R. and T.M.W. would like to acknowledge the support from the Engineering and Physical Sciences Research Council (EPSRC) through the SPECIFIC Innovation and Knowledge Centre (EP/N020863/1) and express their gratitude to the Welsh Government for their support of the Ser Solar programme. P.A.T. acknowledges financial support from the Russian Science Foundation (project No. 19-73-30020). J.K. acknowledges the support by the Solar Photovoltaic Academic Research Consortium II (SPARC II) project, gratefully funded by WEFO. M.K.N. acknowledges financial support from Innosuisse project 25590.1 PFNM-NM, Solaronix, Aubonne, Switzerland. C.-Q.M. would like to acknowledge The Bureau of International Cooperation of Chinese Academy of Sciences for the support of ISOS11 and the Ministry of Science and Technology of China for the financial support (no. 2016YFA0200700). N.G.P. acknowledges financial support from the National Research Foundation of Korea (NRF) grants funded by the Ministry of Science, ICT Future Planning (MSIP) of Korea under contracts NRF-2012M3A6A7054861 and NRF-2014M3A6A7060583 (Global Frontier R&D Program on Center for Multiscale Energy System). CSIRO’s contribution to this work was conducted with funding support from the Australian Renewable Energy Agency (ARENA) through its Advancing Renewables Program. A.F.N gratefully acknowledges support from FAPESP (Grant 2017/11986-5) and Shell and the strategic importance of the support given by ANP (Brazil’s National Oil, Natural Gas and Biofuels Agency) through the R&D levy regulation. Y.-L.L. and Q.B. acknowledge support from the National Science Foundation Division of Civil, Mechanical and Manufacturing Innovation under award no. 1824674. S.D.S. acknowledges the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (HYPERION, grant agreement no. 756962), and the Royal Society and Tata Group (UF150033). The work at the National Renewable Energy Laboratory was supported by the US Department of Energy (DOE) under contract DE-AC36-08GO28308 with Alliance for Sustainable Energy LLC, the manager and operator of the National Renewable Energy Laboratory. The authors (J.J.B, J.M.L., M.O.R, K.Z.) acknowledge support from the ‘De-risking halide perovskite solar cells’ program of the National Center for Photovoltaics, funded by the US Department of Energy, Office of Energy Efficiency and Renewable Energy, Solar Energy Technology Office. The views expressed in the article do not necessarily represent the views of the DOE or the US Government. H.J.S. acknowledges the support of EPSRC UK, Engineering and Physical Sciences Research Council. V.T. and M.Madsen acknowledge ‘Villum Foundation’ for funding of the project CompliantPV, under project no. 13365. M.Madsen acknowledges Danmarks Frie Forskningsfond, DFF FTP for funding of the project React-PV, no. 8022-00389B. M.G. and S.M.Z. thank the King Abdulaziz City for Science and technology (KACST) for financial support. S.V. acknowledges TKI-UE/Ministry of Economic Affairs for financial support of the TKI-UE toeslag project POP-ART (no. 1621103). RC thanks the grants for Development of New Faculty Staff, Ratchadaphiseksomphot Endowment Fund. A.D.C. gratefully acknowledges funding from the European Union’s Horizon 2020 Research and Innovation Program (grant agreement no. 785219-GrapheneCore2 and no. 764047-ESPResSo). M.L.C. and H.X. acknowledges the support from Spanish MINECO for the grant GraPErOs (ENE2016-79282-C5-2-R), the OrgEnergy Excellence Network CTQ2016-81911- REDT, the Agència de Gestiód’Ajuts Universitaris i de Recerca (AGAUR) for the support to the consolidated Catalonia research group 2017 SGR 329 and the Xarxa de Referència en Materials Avançats per a l’Energia (Xarmae). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Emergence of intraparticle entanglement and time-varying violation of Bell's inequality in Dirac matter

  • Gabrielly de Moraes, Bruna
  • Cummings, Aron W.
  • Roche, Stephan
We demonstrate the emergence and dynamics of intraparticle entanglement in massless Dirac fermions. This entanglement, generated by spin-orbit coupling, arises between the spin and sublattice pseudospin of electrons in graphene. The entanglement is a complex dynamic quantity but is generally large, independent of the initial state. Its time dependence implies a dynamical violation of a Bell inequality, while its magnitude indicates that large intraparticle entanglement is a general feature of graphene on a substrate. These features are also expected to impact entanglement between pairs of particles, and may be detectable in experiments that combine Cooper pair splitting with nonlocal measurements of spin-spin correlation in mesoscopic devices based on Dirac materials., ICN2 is funded by the CERCA Programme/Generalitat de Catalunya, and is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). The authors acknowledge the European Union’s Horizon 2020 research and innovation programme under Grants Agreement No. 785219 and No. 881603 (Graphene Flagship). B.G. deM. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 754558 (PREBIST)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring event horizons and Hawking radiation through deformed graphene membranes

  • Morresi, Tommaso
  • Binosi, Daniele
  • Simonucci, Stefano
  • Piergallini, Riccardo
  • Roche, Stephan
  • Pugno, Nicola
  • Simone, Taioli
Analogue gravitational systems are becoming an increasing popular way of studying the behaviour of quantum systems in curved spacetime. Setups based on ultracold quantum gases in particular, have been recently harnessed to explore the thermal nature of Hawking's and Unruh's radiation that was theoretically predicted almost 50 years ago. For solid state implementations, a promising system is graphene, in which a link between the Dirac-like low-energy electronic excitations and relativistic quantum field theories has been unveiled soon after its discovery. This link could be extended to the case of curved quantum field theory when the graphene sheet is shaped in a surface of constant negative curvature, known as Beltrami's pseudosphere. Here we provide numerical evidence that energetically stable negative curvature graphene surfaces can be realized. Owing to large-scale simulations, our geometrical realizations are characterized by a ratio between the carbon–carbon bond length and the pseudosphere radius small enough to allow the formation of an analog of a black hole event horizon. Additionally, from the energy dependence of the spatially resolved density of states, we infer some thermal properties of the corresponding gravitational system, which could be investigated using low temperature scanning tunnelling microscopy or optical near field spectroscopy. These findings pave the way to the realization of a solid-state system in which the curved spacetime dynamics of quantum many body systems can be investigated., ICN2 is funded by the CERCA Programme/Generalitat de Catalunya, and is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). S R acknowledges the European Union’s Horizon 2020 research and innovation programme under grant agreement Nos. 785219 and 881603 (Graphene Flagship). N M P is supported by the European Commission under the Graphene Flagship Core 3 grant No. 881603 (WP14, ‘Composites’). The authors acknowledge Bruno Kessler Foundation (FBK) for providing unlimited access to the KORE computing facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fast electrical modulation of strong near-field interactions between erbium emitters and graphene

  • Cano, Daniel
  • Ferrier, Alban
  • Soundarapandian, Karuppasamy
  • Reserbat-Plantey, Antoine
  • Scarafagio, Marion
  • Tallaire, Alexandre
  • Seyeux, Antoine
  • Marcus, Philippe
  • Riedmatten, Hugues de
  • Goldner, Philippe
  • Koppens, Frank H. L.
  • Tielrooij, Klaas-Jan
Combining the quantum optical properties of single-photon emitters with the strong near-field interactions available in nanophotonic and plasmonic systems is a powerful way of creating quantum manipulation and metrological functionalities. The ability to actively and dynamically modulate emitter-environment interactions is of particular interest in this regard. While thermal, mechanical and optical modulation have been demonstrated, electrical modulation has remained an outstanding challenge. Here we realize fast, all-electrical modulation of the near-field interactions between a nanolayer of erbium emitters and graphene, by in-situ tuning the Fermi energy of graphene. We demonstrate strong interactions with a >1000-fold increased decay rate for ~25% of the emitters, and electrically modulate these interactions with frequencies up to 300 kHz – orders of magnitude faster than the emitter’s radiative decay (~100 Hz). This constitutes an enabling platform for integrated quantum technologies, opening routes to quantum entanglement generation by collective plasmon emission or photon emission with controlled waveform., K.-J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 804349. ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 712721 (NanOQTech). F.H.L.K. acknowledges financial support from the Government of Catalonia trough the SGR grant, and from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522), and Explora Ciencia FIS2017-91599-EXP. F.H.L.K. also acknowledges support by Fundacio Cellex Barcelona, Generalitat de Catalunya through the CERCA program, and the Mineco grants Plan Nacional (FIS2016-81044-P) and the Agency for Management of University and Research Grants (AGAUR) 2017 SGR 1656. Furthermore, the research leading to these results has received funding from the European Union’s Horizon 2020 under Grant Agreements No. 785219 (Core2) and No. 881603 (Core3) Graphene Flagship, and No. 820378 (Quantum Flagship). This work was supported by the ERC TOPONANOP under Grant Agreement No. 726001., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene-based biosensors

  • Merkoçi, Arben
ICN2 is funded by the CERCA programme/Generalitat de Catalunya and the Severo Ochoa Centres of Excellence programme and by the Spanish Research Agency (AEI, Grant No. SEV-2017-0706). EU GRAPHENE FLAGSHIP Core 3 (Reference: 785219) also is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nitric oxide-dependent biodegradation of graphene oxide reduces inflammation in the gastrointestinal tract

  • Peng, Guotao
  • Montenegro, Marcelo F.
  • Ntola, Chifundo N. M.
  • Vranic, Sandra
  • Kostarelos, Kostas
  • Vogt, Carmen
  • Toprak, Muhammet S.
  • Duan, Tianbo
  • Leifer, Klaus
  • Bräutigam, Lars
  • Lundberg, Jon O.
  • Fadeel, Bengt
Understanding the biological fate of graphene-based materials such as graphene oxide (GO) is crucial to assess adverse effects following intentional or inadvertent exposure. Here we provide first evidence of biodegradation of GO in the gastrointestinal tract using zebrafish as a model. Raman mapping was deployed to assess biodegradation. The degradation was blocked upon knockdown of nos2a encoding the inducible nitric oxide synthase (iNOS) or by pharmacological inhibition of NOS using L-NAME, demonstrating that the process was nitric oxide (NO)-dependent. NO-dependent degradation of GO was further confirmed in vitro by combining a superoxide-generating system, xanthine/xanthine oxidase (X/XO), with an NO donor (PAPA NONOate), or by simultaneously producing superoxide and NO by decomposition of SIN-1. Finally, by using the transgenic strain Tg(mpx:eGFP) to visualize the movement of neutrophils, we could show that inhibition of the degradation of GO resulted in increased neutrophil infiltration into the gastrointestinal tract, indicative of inflammation., This work was supported by the European Commission through the Graphene Flagship (grant no. 785219)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Plasmonic antenna coupling to hyperbolic phonon-polaritons for sensitive and fast mid-infrared photodetection with graphene

  • Castilla, Sebastián
  • Vangelidis, Ioannis
  • Pusapati, Varun-Varma
  • Goldstein, Jordan
  • Autore, Marta
  • Slipchenko, Tetiana
  • Rajendran, Khannan
  • Kim, Seyoon
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Martín-Moreno, Luis
  • Englund, Dirk
  • Tielrooij, Klaas-Jan
  • Hillenbrand, Rainer
  • Lidorikis, Elefterios
  • Koppens, Frank H. L.
Integrating and manipulating the nano-optoelectronic properties of Van der Waals heterostructures can enable unprecedented platforms for photodetection and sensing. The main challenge of infrared photodetectors is to funnel the light into a small nanoscale active area and efficiently convert it into an electrical signal. Here, we overcome all of those challenges in one device, by efficient coupling of a plasmonic antenna to hyperbolic phonon-polaritons in hexagonal-BN to highly concentrate mid-infrared light into a graphene pn-junction. We balance the interplay of the absorption, electrical and thermal conductivity of graphene via the device geometry. This approach yields remarkable device performance featuring room temperature high sensitivity (NEP of 82 pW/Hz−−−√) and fast rise time of 17 nanoseconds (setup-limited), among others, hence achieving a combination currently not present in the state-of-the-art graphene and commercial mid-infrared detectors. We also develop a multiphysics model that shows very good quantitative agreement with our experimental results and reveals the different contributions to our photoresponse, thus paving the way for further improvement of these types of photodetectors even beyond mid-infrared range., F.H.L.K. acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R& D (SEV-2015-0522), support by Fundacio Cellex Barcelona, Generalitat de Catalunya through the CERCA program, and the Agency for Management of University and Research Grants (AGAUR) 2017 SGR 1656. Furthermore, the research leading to these results has received funding from the European Union Seventh Framework Programme under grant agreement no. 785219 and no. 881603 Graphene Flagship for Core2 and Core3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). K.J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 804349. R.H. acknowledges financial support from the Spanish Ministry of Science, Innovation and Universities (national project RTI2018-094830-B-100 and the project MDM-2016-0618 of the Marie de Maeztu Units of Excellence Program) and the Basque Government (grant No. IT1164-19). S.C. acknowledges financial support from the Barcelona Institute of Science and Technology (BIST), the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and the European Social Fund (L’FSE inverteix en el teu futur)—FEDER. D.E. acknowledges partial support from the Army Research Office MURI “Ab-Initio Solid-State Quantum Materials” Grant No. W911NF18-1-0431. J.G. was supported by the ARL-MIT Institute for Soldier Nanotechnologies (ISN). T.S. and L.M.M. acknowledge support by Spain’s MINECO under Grant No. MAT2017-88358-C3-1-R and the Aragon Government through project Q-MAD., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Splenic capture and in vivo intracellular biodegradation of biological-grade graphene oxide sheets

  • Newman, Leon
  • Jasim, Dhifaf
  • Prestat, Eric
  • Lozano, Neus
  • Lazaro, Irene de
  • Nam, Yein
  • Assas, Bakri M.
  • Pennock, Joanne
  • Haigh, Sarah J.
  • Bussy, Cyrill
  • Kostarelos, Kostas
Carbon nanomaterials, including 2D graphene-based materials, have shown promising applicability to drug delivery, tissue engineering, diagnostics, and various other biomedical areas. However, to exploit the benefits of these materials in some of the areas mentioned, it is necessary to understand their possible toxicological implications and long-term fate in vivo. We previously demonstrated that following intravenous administration, 2D graphene oxide (GO) nanosheets were largely excreted via the kidneys; however, a small but significant portion of the material was sequestered in the spleen. Herein, we interrogate the potential consequences of this accumulation and the fate of the spleen-residing GO over a period of nine months. We show that our thoroughly characterized GO materials are not associated with any detectable pathological consequences in the spleen. Using confocal Raman mapping of tissue sections, we determine the sub-organ biodistribution of GO at various time points after administration. The cells largely responsible for taking up the material are confirmed using immunohistochemistry coupled with Raman spectroscopy, and transmission electron microscopy (TEM). This combination of techniques identified cells of the splenic marginal zone as the main site of GO bioaccumulation. In addition, through analyses using both bright-field TEM coupled with electron diffraction and Raman spectroscopy, we reveal direct evidence of in vivo intracellular biodegradation of GO sheets with ultrastructural precision. This work offers critical information about biological processing and degradation of thin GO sheets by normal mammalian tissue, indicating that further development and exploitation of GO in biomedicine would be possible., This work was partially supported by the EPSRC NOWNANO DTC program and grants EP/K016946/1 and EP/M010619/1. This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement numbers GrapheneCore1 (696656) and GrapheneCore2 (785219). D.J. and K.K. would like to acknowledge the support by the UKRI, EPSRC from the Programme Grant 2D-Health (EP/P00119X/1). The DTRA, USA (grant HDTRA1-12-1-0013), is also acknowledged for partial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultralow-dielectric-constant amorphous boron nitride

  • Hong, Seokmo
  • Lee, Chang-Seok
  • Lee, Min-Hyun
  • Lee, Yeongdong
  • Ma, Kyung Yeol
  • Kim, Gwangwoo
  • Yoon, Seong In
  • Ihm, Kyuwook
  • Kim, Ki-Jeong
  • Shin, Tae Joo
  • Kim, Sang Won
  • Jeon, Eun-chae
  • Jeon, Hansol
  • Kim, Ju-Young
  • Lee, Hyung-Ik
  • Lee, Zonghoon
  • Antidormi, Aleandro
  • Roche, Stephan
  • Chhowalla, Manish
  • Shin, Hyeon-Jin
  • Shin, Hyeon Suk
We thank UNIST Central Research Facilities (UCRF) and Y. K. Kim for the cross-sectional high-resolution TEM images. This work was supported by Samsung Electronics (Samsung-SKKU Graphene/2D Center), the research fund (NRF-2017R1E1A1A01074493 and NRF-2019R1A4A1027934), the IBS (IBS-R-019-D1) and a grant (CASE-2013M3A6A5073173) from the Centre for Advanced Soft Electronics under the Global Frontier Research Program via the National Research Foundation of the Ministry of Science and ICT, South Korea. The NEXAFS experiments performed at the 4D, 6D and 10A2 beamlines of the Pohang Accelerator Laboratory (PAL) were supported in part by the Ministry of Science and ICT, POSTECH and UNIST. M.C. acknowledges support from Leverhulme Trust Research Grant RPG-2019-227. S.R., A.A. and M.C. acknowledge the European Union Horizon 2020 research and innovation programme for grant number 785219 and 881603 (Graphene Flagship). A.A. is supported by Project MECHANIC (PCI2018-093120) funded by Ministerio de Ciencia, Innovación y Universidades. The Catalan Institute of Nanoscience and Nanotechnology is funded by the CERCA Programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (grant number SEV-2017-0706)., Peer reviewed