Skip to main content

SINERGIAS ENTRE CARBONES POROSOS Y NANOPARTICULAS: APLICACIONES AL ALMACENAMIENTO Y USO DE HIDROGENO COMO COMBUSTIBLE Y A CATALISIS

MAT2014-54378-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE VALLADOLID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modelling of adsorption and intercalation of hydrogen on/into tungsten disulphide multilayers and multiwall nanotubes

  • Martínez, José I.
  • Laikhtman, Alexander
  • Moon, Hoi Ri
  • Zak, Alla
  • Alonso, J. A.
Understanding the interaction of hydrogen with layered materials is crucial in the fields of sensors, catalysis, fuel cells and hydrogen storage, among others. Density functional theory, improved by the introduction of van der Waals dispersion forces, provides an efficient and practical workbench to investigate the interaction of molecular and atomic hydrogen with WS2 multilayers and nanotubes. We find that H2 physisorbs on the surface of those materials on top of W atoms, while atomic H chemisorbs on top of S atoms. In the case of nanotubes, the chemisorption strength is sensitive to the nanotube diameter. Diffusion of H2 on the surface of WS2 encounters quite small activation barriers whose magnitude helps to explain previous and new experimental results for the observed dependence of the hydrogen concentration with temperature. Intercalation of H2 between adjacent planar WS2 layers reveals an endothermic character. Intercalating H atoms is energetically favorable, but the intercalation energy does not compensate for the cost of dissociating the molecules. When H2 molecules are intercalated between the walls of a double wall nanotube, the rigid confinement induces the dissociation of the confined molecules. A remarkable result is that the presence of a full H2 monolayer adsorbed on top of the first WS2 layer of a WS2 multilayer system strongly facilitates the intercalation of H2 between WS2 layers underneath. This opens up an additional gate to intercalation processes., This work was supported by the Spanish MINECO (Grants MAT2017-85089-C2-1-R and MAT2014-54378-R), and by the EU via the ERC-Synergy Program (Grant No. ERC-2013-SYG-610256 NANOCOSMOS) and the H2020 Innovation Program (Grant agreements 696656, Graphene Flagship Core 1, and 785219, Graphene Flagship Core 2). J. I. M. also acknowledges support from Ramón y Cajal Program (Grant RYC-2015-17730), as well as computing resources from CTI-CSIC. A. Z. acknowledges financial support from Israel PAZI foundation. The cooperation of A. L. and H. R. M. was supported by the Israel-Korea Renewable Energy grant. A. L. acknowledges European COST action MP1302 “Nanospectroscopy”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Manipulating the magnetic moment of palladium clusters by adsorption and dissociation of molecular hydrogen

  • López, María J.
  • Blanco-Rey, María
  • Juaristi Oliden, Joseba Iñaki
  • Alducin Ochoa, Maite
  • Alonso, J. A.
There is a sizable probability for the dissociation of H deposited at low energy on palladium clusters supported on graphene. This is accompanied by a total or partial quenching of the magnetic moment of the cluster, and we have investigated the interplay between these two processes: magnetization change and molecular dissociation. For this purpose, the density functional formalism has been used, in the form of ab initio molecular dynamics simulations and static calculations. Two different cluster sizes have been investigated, Pd and Pd, and the conclusion is that the size of the Pd cluster has a strong influence on the sequence of these two processes. The effect of H dissociation is to reduce the magnetic moments of both clusters by about 2 μ, resulting in unpolarized Pd on the one hand and Pd with a magnetic moment of 2 μ on the other. In the case of Pd, the quenching of the magnetic moment occurs immediately after the dissociation of the H molecule. In contrast, the quenching of the magnetic moment in Pd is induced by the arrival of the H molecule at its preferred adsorption sites on specific Pd atoms. Once settled in those positions, dissociation takes place almost spontaneously, with a very small activation barrier and no further change of the magnetization. In this way, adsorption and dissociation of H can be viewed as an effective tool to manipulate the magnetic state of clusters and nanoparticles supported on carbonaceous substrates, which could lead to interesting applications in devices., M.B.R., J.I.J., and M.A. acknowledge support by Basque Departamento de Educacion, Universidades e Investigacion, the University of the Basque Country UPV/EHU (Grant IT756-13). J.A.A. and M.J.L. acknowledge support by Junta de Castilla y Leon (Grant VA050U14). The Spanish MINECO is acknowledged for Grants FIS2013-48286-C2-2-P (M.B.R., J.I.J., and M.A.), FIS2016-76471-P (J.I.J. and M.A.), FIS2016-75862-P (M.B.R.), and MAT2014-54378-R (J.A.A. and M.J.L.)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydrogen Chemical Configuration and Thermal Stability in Tungsten Disulfide Nanoparticles Exposed to Hydrogen Plasma

  • Laikhtman, Alexander
  • Makrinich, Gennady
  • Sezen, Meltem
  • Yildizhan, Melike M.
  • Martínez, José I.
  • Dinescu, Doru
  • Prodana, Mariana
  • Enachescu, Marius
  • Alonso, Julio A.
  • Zak, Alla
The chemical configuration and interaction mechanism of hydrogen adsorbed in inorganic nanoparticles of WS are investigated. Our recent approaches of using hydrogen activated by either microwave or radiofrequency plasma dramatically increased the efficiency of its adsorption on the nanoparticle surface. In the current work we put an emphasis on elucidation of the chemical configuration of the adsorbed hydrogen. This configuration is of primary importance as it affects its adsorption stability and possibility of release. To get insight on the chemical configuration, we combined the experimental analysis methods with theoretical modeling based on the density functional theory (DFT). Micro-Raman spectroscopy was used as a primary tool to elucidate chemical bonding of hydrogen and to distinguish between chemi- and physisorption. Hydrogen adsorbed in molecular form (H) was clearly identified in all plasma-hydrogenated WS nanoparticles samples. It was shown that the adsorbed hydrogen is generally stable under high vacuum conditions at room temperature, which implies its stability at the ambient atmosphere. A DFT model was developed to simulate the adsorption of hydrogen in the WS nanoparticles. This model considers various adsorption sites and identifies the preferential locations of the adsorbed hydrogen in several WS structures, demonstrating good concordance between theory and experiment and providing tools for optimizing hydrogen exposure conditions and the type of substrate materials., This work was partially supported by the Israel-Korea grant of Israeli and Korean governments, by ENIAC European grant “Lab4MEMS” Nr. ENIAC 3/2013-UEFISCDI, and by European COST actions MP1103, MP1302, and CM1301. The work of JAA was supported by MINECO (grant MAT2014-54378-R) and Junta de Castilla y León (grant VA050U14). JIM acknowledges funding from the ERC Synergy Grant ERC-2013-SYG-610256 NANOCOSMOS and computing resources from CTI-CSIC. AZ acknowledges the support provided by the INNI-FTA grant and Pazy foundation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Is spillover relevant for hydrogen adsorption and storage in porous carbons doped with palladium nanoparticles?

  • Blanco-Rey, María
  • Juaristi Oliden, Joseba Iñaki
  • Alducin Ochoa, Maite
  • López, María J.
  • Alonso, J. A.
Experiments have shown that the efficiency of nanoporous carbons to store hydrogen becomes enhanced by doping the material with metallic nanoparticles. In particular, doping with palladium has been used with success. The hypothesis to justify the enhancement has been that the Pd nanoparticles dissociate the hydrogen molecules and then the hydrogen atoms spill over the carbon substrate, where the hydrogen is retained. To test this hypothesis we have performed ab initio molecular dynamics simulations of the deposition of molecular hydrogen on Pd nanoparticles (Pd6 and Pd13) supported on graphene, which is a good model for the wall of a carbon nanopore. Three channels have been identified in the simulations: bouncing off the molecule, molecular adsorption, and dissociation of the molecule in two H atoms. The relative percentage of those channels is sensitive to the size of the Pd particle. Dissociation occurs more frequently on Pd13 and it generally takes place on the lateral regions of the Pd particles. However, in our simulations, we have not found a single case of H atoms or H2 molecules spilling over the carbon substrate. We have also tested the situation when several H atoms are preadsorbed on the Pd6 and Pd13 particles and found that not a single dissociation event occurs on these H-saturated nanoparticles. These results lead us to cast strong doubts on the validity of the spillover mechanism for explaining the enhancement of hydrogen adsorption on porous carbons doped with transition metal nanoparticles., M.B.-R., J.I.J. and M.A. acknowledge support by Basque Departamento de Educación, Universidades e Investigación, the University of the Basque Country UPV/EHU (Grant No. IT-756-13) and the Spanish Ministerio de Economía y Competitividad (Grant No. FIS2013-48286-C2-2-P). J.A.A. and M.J.L. acknowledge support by MINECO (Grant No. MAT2014-54378-R) and Junta de Castilla y León (Grant No. VA050U14). The authors thankfully acknowledge the computer resources provided by the DIPC computing center., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Graphene Formation through Spontaneous Exfoliation of Graphite by Chlorosulfonic Acid: A DFT Study

  • Bol Arreba, Alfredo
  • Gómez Ayala, Mª Isabel
  • Cordero Tejedor, Nicolás A.
Using exfoliating agents is one of the most promising ways for large-scale production of liquid dispersed graphenic materials from graphite. Therefore, it is crucial to know the reason why some molecules have a larger exfoliating power than others. The highest reported experimental yield for the liquid phase single-surfactant spontaneous exfoliation of graphite, i.e., without sonication, has been obtained using chlorosulfonic acid. The ability of this acid to disperse graphite is studied within the framework of Density Functional Theory (DFT). Equilibrium configurations, electron transfers, binding energies, and densities of states are presented for two acid concentrations and for two situations: adsorption (on monolayer and bilayer graphene) and intercalation (in between simple hexagonal and Bernal-stacked bilayer graphene). Experimental exfoliation power and dispersion stability are explained in terms of charge transfer—the largest found among several studied exfoliating and surfactant agents—facilitated by the good geometrical matching of chlorosulfonic acid molecules to constituent carbon rings of graphene. This matching is in the origin of the tendency toward adsorption of chlorosulfonic acid molecules on graphene monolayers when they separate, originating the charging of the monolayers that precludes their reaggregation., This work was supported by the Spanish MICINN and the European Regional Development Fund (grant MAT2014-54378-R) as well as Junta de Castilla y León (grant VA050U14).