Skip to main content

TRANSPORTE DE ELECTRONES Y FONONES EN NANODISPOSITIVOS PARA APLICACIONES DE BAJO Y CERO CONSUMO

TEC2015-67462-C2-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 52
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Collective thermal transport in pure and alloy semiconductors

  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Mohammed, Amr
  • Torello Massana, Alvar|||0000-0002-4173-2529
  • Bafaluy, Javier|||0000-0003-1972-9339
  • Camacho, Juan|||0000-0002-8095-4167
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Shakouri, Ali
  • Alvarez, F. Xavier|||0000-0001-6746-2144
Conventional models for predicting thermal conductivity of alloys usually assume a pure kinetic regime as alloy scattering dominates normal processes. However, some discrepancies between these models and experiments at very small alloy concentrations have been reported. In this work, we use the full first principles kinetic collective model (KCM) to calculate the thermal conductivity of Si1-xGex and InxGa1-xAs alloys. The calculated thermal conductivities match well with the experimental data for all alloy concentrations. The model shows that the collective contribution must be taken into account at very low impurity concentrations. For higher concentrations, the collective contribution is suppressed, but normal collisions have the effect of significantly reducing the kinetic contribution. The study thus shows the importance of the proper inclusion of normal processes even for alloys for accurate modeling of thermal transport. Furthermore, the phonon spectral distribution of the thermal conductivity is studied in the framework of KCM, providing insights to interpret the superdiffusive regime introduced in the truncated Lévy flight framework.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

First principles kinetic-collective thermal conductivity of semiconductors

  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Torello Massana, Alvar|||0000-0002-4173-2529
  • Bafaluy, Javier|||0000-0003-1972-9339
  • Camacho, Juan|||0000-0002-8095-4167
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Alvarez, F. Xavier|||0000-0001-6746-2144
A fully predictive kinetic-collective model using first principles phonon spectra and relaxation times is presented. Thermal conductivity values obtained for Si, Ge, C (diamond), and GaAs in a wide range of sizes and temperatures are in good agreement with experimental data without the use of any fitting parameter. These results open the door to discuss how the precise combination of kinetic and collective contributions to heat transport could provide a useful framework to interpret recent complex experiments displaying non-Fourier behavior.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hydrodynamic heat transport in compact and holey silicon thin films

  • Beardo, Albert|||0000-0003-1889-1588
  • Calvo Schwarzwälder, Marc|||0000-0003-4284-1898
  • Camacho, Juan|||0000-0002-8095-4167
  • Myers, T. G.|||0000-0001-7573-8059
  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Sendra Molins, Lluc|||0000-0001-8821-6831
  • Alvarez, F. Xavier|||0000-0001-6746-2144
  • Bafaluy, Javier|||0000-0003-1972-9339
A multiscale hydrodynamic-heat-transport model applicable to arbitrary geometries using finite-element methods is compared with the experimental effective thermal conductivity of silicon thin films and periodic holey membranes for different sizes and temperatures. The range of system length scales and temperatures in which the model predictions agree with experimental data is discussed and quantitatively determined. The model agrees with experimental results when the smallest system size is larger than twice the nonlocal length, an intrinsic property of the material that depends only on temperature. These results open the door to the use of the hydrodynamic equation instead of an effective Fourier model to interpret current heat-transport experimental data.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The gate tunable 2D pn junction driven out-of-equilibrium

  • Chaves Romero, Ferney Alveiro|||0000-0001-9506-4485
  • Jiménez, David|||0000-0002-8148-198X
We have investigated the electrostatics and electronic transport of the gate tunable 2D pn junction by implementing a comprehensive physics-based simulator that self-consistently solves the 2D Poisson's equation coupled to the drift-diffusion current and continuity equations. The simulator considers the strong influence of the out-of-plane electric field through the gate dielectric and the presence of interface states. The impact of parameters such as gate capacitance, energy gap, and interface trap states density have been considered to model properties such as the depletion width, rectification factor, and depletion and diffusion capacitances. The present work opens the door to a wider exploration of potential advantages that gate tunable 2D pn junctions could bring in terms of figures of merit.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Unveiling the impact of the bias-dependent charge neutrality point on graphene based multi-transistor applications

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Rodriguez, Noel|||0000-0002-6032-6921
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Jiménez, David|||0000-0002-8148-198X
The Dirac voltage of a graphene field-effect transistor (GFET) stands for the gate bias that sets the charge neutrality condition in the channel, thus resulting in a minimum conductivity. Controlling its dependence on the terminal biases is crucial for the design and optimization of radio-frequency applications based on multiple GFETs. However, the previous analysis of such dependence carried out for single devices is uncomplete and if not properly understood could result in circuit designs with poor performance. The control of the Dirac point shift (DPS) is particularly important for the deployment of graphene-based differential circuit topologies where keeping a strict symmetry between the electrically balanced branches is essential for exploiting the advantages of such topologies. This note sheds light on the impact of terminal biases on the DPS in a real device and sets a rigorous methodology to control it so to eventually optimize and exploit the performance of radio-frequency applications based on GFETs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Scalable Block-Tridiagonal Eigensolvers in the Context of Electronic Structure Calculations

  • Lamas Daviña, Alejandro
  • Jose E. Roman|||0000-0003-1144-6772
  • Cartoixà, Xavier
[EN] In computer-based numerical simulations, some methods to determine the electronic and optical properties of semiconductor nanostructures, require computing the energies that correspond to the interior eigenvalues of a Hamiltonian matrix. We study the case in which the Schrödinger equation is expanded into a matrix that has a block-tridiagonal structure. Additionally, the matrix can have two extra non zero blocks in the corners due to periodic boundary conditions. Given that not the whole eigenspectrum is required, we choose to use projection methods to compute the necessary set of eigenvalues. The shift-and-invert Lanczos method requires to solve a linear system at each iteration. We have developed a parallel code that improves the scalability of this step by exploiting the block structure. Results show that, to solve these specific cases, this method offers better scalability when compared to a general-purpose solver such as MUMPS., The authors would like to acknowledge the support by Agencia Estatal de Investigacion under project TIN2016-75985-P, which includes European Commission ERDF funds, and the Spanish Ministerio de Economia y Competitividad under project No. TEC2015-67462-C2-1-R (MINECO/FEDER). Also, this work has received funding from the European Union¿s Horizon 2020 research and innovation program under grant agreement No 696656, and the Department d¿Universitats, Recerca i Societat de la Informacio of the Generalitat de Catalunya under contract 2014-SGR-384. Alejandro Lamas Davi¿na was supported by the Spanish Ministry of Education, Culture and Sport through grant FPU13-06655. The authors are also grateful for the resources provided by the Spanish Supercomputing Network.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal transport in porous Si nanowires from approach-to-equilibrium molecular dynamics calculations

  • Cartoixà, Xavier
  • Dettori, Riccardo
  • Melis, Claudio
  • Colombo, Luciano
  • Rurali, Riccardo
We study thermal transport in porous Si nanowires (SiNWs) by means of approach-to-equilibrium molecular dynamics simulations. We show that the presence of pores greatly reduces the thermal conductivity, j, of the SiNWs as long mean free path phonons are suppressed. We address explicitly the dependence of j on different features of the pore topology—such as the porosity and the pore diameter—and on the nanowire (NW) geometry—diameter and length. We use the results of the molecular dynamics calculations to tune an effective model, which is capable of capturing the dependence of j on porosity and NW diameter. The model illustrates the failure of Matthiessen’s rule to describe the coupling between boundary and pore scattering, which we account for by the inclusion of an additional empirical term., We acknowledge financial support by the Spanish MINECO under Grant Nos. FIS2012-37549-C05-02, MAT2013-40581-P, TEC2012-31330 (co-funded by the EU under the FEDER Program), and TEC2015-67462-C2-1-R (MINECO/FEDER) and through the Severo Ochoa Centres of Excellence Program under Grant Nos. SEV-2013-0295 and SEV-2015-0496; the Generalitat de Catalunya under Grant Nos. 2014 SGR 301 and 2014 SGR 384; the Regione Sardegna basic research Project No. CRP78744 “Energy Applications with Porous Silicon (ENAPSi).” One of us (R.D.) acknowledges Regione Sardegna for financial support under Project P.O.R. Sardegna F.S.E. 2007-2013 (Axis IV Human Resources, Objective l.3, Line of Activity l.3.1.). The calculations have been performed at the Barcelona Supercomputing Center (BSC-CNS) within the project “Nanoporous silicon for thermoelectric applications (FI-2015-1-0010)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal rectification in silicon by a graded distribution of defects

  • Dettori, Riccardo
  • Melis, Claudio
  • Rurali, Riccardo
  • Colombo, Luciano
We discuss about computer experiments based on nonequilibrium molecular dynamics simulations providing evidence that thermal rectification can be obtained in bulk Si by a non-uniform distribution of defects. We consider a graded population of both Ge substitutional defects and nanovoids, distributed along the direction of an applied thermal bias, and predict a rectification factor comparable to what is observed in other low–dimensional Si–based nanostructures. By considering several defect distribution profiles, thermal bias conditions, and sample sizes, the present results suggest that a possible way for tuning the thermal rectification is by defect engineering., We acknowledge the financial support by the Spanish MINECO under Grant Nos. FEDER-FIS2012-37549-C05-02, FEDER-MAT2013-40581-P, TEC2012-31330, and TEC2015-67462-C2-1-R, the Generalitat de Catalunya under Grant Nos. 2014 SGR 301 and 2014 SGR 384, and the Spanish MINECO through the Severo Ochoa Centres of Excellence Program under Grant Nos. SEV-2013-0295 and SEV-2015-0496. We also acknowledge the financial support by the Regione Sardegna basic research project CRP78744 “Energy Applications with Porous Silicon (ENAPSi).” One of us (R.D.) acknowledges Regione Sardegna for the financial support under project P.O.R. Sardegna F.S.E. 2007-2013 (Axis IV Human Resources, Objective l.3, Line of Activity l.3.1.). We finally acknowledge the computational support by CINECA under ISCRA project TREWI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Heat transport through a solid–solid junction: the interface as an autonomous thermodynamic system

  • Rurali, Riccardo
  • Colombo, Luciano
  • Cartoixà, Xavier
  • Wilhelmsen, Øivind
  • Trinh, Thuat T.
  • Bedeaux, Dick
  • Kjelstrup, Signe
We perform computational experiments using nonequilibrium molecular dynamics simulations, showing that the interface between two solid materials can be described as an autonomous thermodynamic system. We verify the local equilibrium and give support to the Gibbs description of the interface also away from the global equilibrium. In doing so, we reconcile the common formulation of the thermal boundary resistance as the ratio between the temperature discontinuity at the interface and the heat flux with a more rigorous derivation from nonequilibrium thermodynamics. We also show that thermal boundary resistance of a junction between two pure solid materials can be regarded as an interface property, depending solely on the interface temperature, as implicitly assumed in some widely used continuum models, such as the acoustic mismatch model. Thermal rectification can be understood on the basis of different interface temperatures for the two flow directions., We acknowledge financial support from the Ministerio de Economı´a y Competitividad (MINECO) under grant no. FIS2012-37549-C05-02, MAT2013-40581-P, TEC2012-31330 and TEC2015-67462-C2-1-R (co-funded by the EU under the FEDER program), the Generalitat de Catalunya under grant no. 2014 SGR 301 and 2014 SGR 384, and the Spanish MINECO through the Severo Ochoa Centres of Excellence Program under grant no. SEV-2013-0295 and SEV-2015-0496 and from the Research Council of Norway under Project no. 221672. The Department of Chemistry, Faculty of Science and Technology, Norwegian University of Science and Technology supported ØW, TT, DB, and SK., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The thermal boundary resistance at semiconductor interfaces: a critical appraisal of the Onsager vs. Kapitza formalisms

  • Rurali, Riccardo
  • Cartoixà, Xavier
  • Bedeaux, Dick
  • Kjelstrup, Signe
  • Colombo, Luciano
We critically readdress the definition of thermal boundary resistance at an interface between two semiconductors. By means of atomistic simulations we provide evidence that the widely used Kapitza formalism predicts thermal boundary resistance values in good agreement with the more rigorous Onsager non-equilibrium thermodynamics picture. The latter is, however, better suited to provide physical insight on interface thermal rectification phenomena. We identify the factors that determine the temperature profile across the interface and the source of interface thermal rectification. To this end we perform non-equilibrium molecular dynamics computational experiments on a Si–Ge system with a graded compositional interface of varying thickness, considering thermal bias of different sign., We acknowledge financial support by the Ministerio de Economía y Competitividad (MINECO) under grants no. FIS2012-37549-C05-02, MAT2013-40581-P, TEC2015-67462-C2-1-R (MINECO/FEDER) and FEDER-MAT2017-90024-P, the Generalitat de Catalunya under grants no. 2014 SGR 301 and 2017 SGR 1506, and the Spanish MINECO through the Severo Ochoa Centres of Excellence Program under Grants SEV-2013-0295 and SEV-2015-0496. SK and DB are grateful to the Research Council of Norway through its Centres of Excellence funding scheme, project number 262644, PoreLab. X. C. also acknowledges Regione Autonoma della Sardegna for financial support under the initiative “Visiting Professor 2017”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal conductivity of Bi2Te3 nanowires: how size affects phonon scattering

  • Muñoz Rojo, Miguel
  • Abad Mayor, Begoña
  • Manzano, Cristina V.
  • Torres, P.
  • Cartoixà, Xavier
  • Álvarez, F. Xavier
  • Martín-González, Marisol
This work provides an in-depth study of how the thermal conductivity of stoichiometric [110] Bi2Te3 nanowires becomes affected when reducing its diameter from an experimental and theoretical point of view. The thermal conductivity was observed to decrease more than 70% (from 1.78 ± 0.46 W K−1 m−1 to 0.52 ± 0.35 W K−1 m−1) when the diameter of the nanowire was reduced one order of magnitude (from 300 nm to 25 nm). The Kinetic–Collective model was used to understand such a reduction, which can be explained by the impact that surface scattering has in acoustic phonons. The smaller the diameter of the nanowires is, the larger the alteration in the mean free path of the low-frequency phonons is. The model agrees well with the experimental data, and the reduction in the thermal conductivity of the nanowires can be explained in terms of an increment of phonon scattering., This work has been supported by the ERC Starting Grant Nano-TEC number 240497 and the national project PHOMENTA MAT2011-27911, and CONSOLIDER NANOTHERM No. CSD2010-0044. M. M. R. wants to acknowledge the National Research Council of Spain (CSIC) and the European Social Fund for PhD financial support by a JAE-Pre Doc fellowship. The authors acknowledge the Scanning Electron Microscope from the Institute of Microelectronics of Madrid (IMM-CSIC) 13-4E-1794. We acknowledge financial support by the Ministerio Español de Economía y Competitividad under Project No. TEC2015-67462-C2-2-R (MINECO/FEDER) and TEC2015-67462-C2-1-R (MINECO/FEDER). This project has also received funding from the Department d'Universitats, Recerca i Societat de la Informació of the Generalitat de Catalunya under contract 2014-SGR-384., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phonon Engineering in Twinning Superlattice Nanowires

  • De Luca, Marta
  • Fasolato, Claudia
  • Verheijen, Marcel A.
  • Ren, Yizhen
  • Swinkels, Milo Y.
  • Kölling, Sebastian
  • Bakkers, Erik P. A. M.
  • Rurali, Riccardo
  • Cartoixà, Xavier
  • Zardo, Ilaria
One of the current challenges in nanoscience is tailoring the phononic properties of a material. This has long been a rather elusive task because several phonons have wavelengths in the nanometer range. Thus, high quality nanostructuring at that length-scale, unavailable until recently, is necessary for engineering the phonon spectrum. Here we report on the continuous tuning of the phononic properties of a twinning superlattice GaP nanowire by controlling its periodicity. Our experimental results, based on Raman spectroscopy and rationalized by means of ab initio theoretical calculations, give insight into the relation between local crystal structure, overall lattice symmetry, and vibrational properties, demonstrating how material engineering at the nanoscale can be successfully employed in the rational design of the phonon spectrum of a material., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement 756365) and from the Swiss National Science Foundation research Grant (Project Grant 200021_165784). R.R. acknowledges financial support by the Ministerio de Economi ́ a, Industria y Competitividad (MINECO) under Grant FEDER-MAT2017- 90024-P and the Severo Ochoa Centres of Excellence Program under Grant SEV-2015-0496 and by the Generalitat de Catalunya under Grant 2014 SGR 301. X.C. acknowledges financial support by the Ministerio de Economi ́ a, Industria y Competitividad under Grant TEC2015-67462-C2-1-R (MINECO/FEDER). The calculations have been performed at the Red Española de Supercomputacion (RES) within the ́ project “Phonons dispersion relation in GaP crystal phase superlattices” (FI-2017-1-0026). Solliance and the Dutch province of Noord-Brabant are acknowledged for funding the TEM facility. M.D.L. acknowledges support from the Swiss National Science Foundation Ambizione Grant (Grant PZ00P2_179801). C.F. acknowledges financial support from Sapienza University scholarship “Borsa di Perfezionamento all’Estero 2017−2018”. The authors thank A. Campo and M. Carballido for nanowire manipulation and Z. Azdad for preliminary work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Understanding the bias dependence of low frequency noise in single layer graphene FETs

  • Mavredakis, Nikolaos
  • Garcia Cortadella, Ramon
  • Bonaccini Calia, Andrea
  • Garrido, Jose A.
  • Jiménez, David
This letter investigates the bias-dependent low frequency noise of single layer graphene field-effect transistors. Noise measurements have been conducted with electrolyte-gated graphene transistors covering a wide range of gate and drain bias conditions for different channel lengths. A new analytical model that accounts for the propagation of the local noise sources in the channel to the terminal currents and voltages is proposed in this paper to investigate the noise bias dependence. Carrier number and mobility fluctuations are considered as the main causes of low frequency noise and the way these mechanisms contribute to the bias dependence of the noise is analyzed in this work. Typically, normalized low frequency noise in graphene devices has been usually shown to follow an M-shape dependence versus gate voltage with the minimum near the charge neutrality point (CNP). Our work reveals for the first time the strong correlation between this gate dependence and the residual charge which is relevant in the vicinity of this specific bias point. We discuss how charge inhomogeneity in the graphene channel at higher drain voltages can contribute to low frequency noise; thus, channel regions nearby the source and drain terminals are found to dominate the total noise for gate biases close to the CNP. The excellent agreement between the experimental data and the predictions of the analytical model at all bias conditions confirms that the two fundamental 1/f noise mechanisms, carrier number and mobility fluctuations, must be considered simultaneously to properly understand the low frequency noise in graphene FETs. The proposed analytical compact model can be easily implemented and integrated in circuit simulators, which can be of high importance for graphene based circuits' design., This work was funded by the Ministerio de Economía y Competitividad under the project TEC2015-67462-C2-1-R and the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. GrapheneCore2 785219 (Graphene Flagship), Marie Skłodowska-Curie Grant Agreement No. 665919 and Grant Agreement No. 732032 (BrainCom)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal conductivity and phonon hydrodynamics in transition metal dichalcogenides from first-principles

  • Torres, Pol
  • Alvarez, Francesc Xavier
  • Cartoixà, Xavier
  • Rurali, Riccardo
We carry out a systematic study of the thermal conductivity of four single-layer transition metal dichalcogenides, MX2 (M = Mo, W; X = S, Se) from first-principles by solving the Boltzmann transport equation (BTE). We compare three different theoretical frameworks to solve the BTE beyond the relaxation time approximation (RTA), using the same set of interatomic force constants computed within density functional theory (DFT), finding that the RTA severely underpredicts the thermal conductivity of MS2 materials. Calculations of the different phonon scattering relaxation times of the main collision mechanisms and their corresponding mean free paths (MFP) allow evaluating the expected hydrodynamic behaviour in the heat transport of such monolayers. These calculations indicate that despite of their low thermal conductivity, the present TMDs can exhibit large hydrodynamic effects, being comparable to those of graphene, especially for WSe2 at high temperatures., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Indications of Phonon Hydrodynamics in Telescopic Silicon Nanowires

  • Melis, Claudio
  • Rurali, Riccardo
  • Cartoixà, Xavier
  • Alvarez, Francesc Xavier
The validity of Fourier’s law in telescopic nanowires is tested by means of molecular dynamics simulations. We observe that the radial dependence of the heat-flux profile, the temperature jump, and the appearance of vorticity obtained in molecular dynamics telescopic wires near the contact point acquire a hydrodynamic character, and we show that they are incompatible with Fourier’s law. We propose the Guyer-Krumhansl equation as a generalization capable of capturing these hydrodynamic effects. Lattice-dynamics results show that the thermal average of the confined modes shows no radial dependence of the vibrating energy inside the wire. This means that hydrodynamic effects could not be related to the confinement effects in these small systems., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal conductivity for III-V and II-VI semiconductor wurtzite and zinc-blende polytypes: The role of anharmonicity and phase space

  • Raya Moreno, Martí
  • Rurali, Riccardo
  • Cartoixà, Xavier
We calculate the lattice thermal conductivity ( κ ) for cubic (zinc-blende) and hexagonal (wurtzite) phases for eight semiconductors using ab initio calculations and solving the phonon Boltzmann transport equation, explaining the different behavior of the ratio κ hex / κ cub between the two phases. We show that this behavior depends on the relative importance of two antagonistic factors: anharmonicity, which we find to be always higher in the cubic phase, and the accessible phase space, which is higher for the less symmetric hexagonal phase. Based on that, we develop a method that predicts the most conducting phase—cubic or hexagonal—where other more heuristic approaches fail. We also present results for nanowires made of the same materials, showing the possibility to tune κ hex / κ cub over a wide range by modifying their diameter, thus making them attractive materials for complex phononic and thermoelectric applications and systems., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phonon transport across crystal-phase interfaces and twin boundaries in semiconducting nanowires

  • Carrete, Jesús
  • López Suárez, Miquel
  • Raya Moreno, Martí
  • Bochkarev, Anton S.
  • Royo Valls, Miquel
  • Madsen, Georg K. H.
  • Cartoixà, Xavier
  • Mingo, Natalio
  • Rurali, Riccardo
We combine state-of-the-art Green's-function methods and nonequilibrium molecular dynamics calculations to study phonon transport across the unconventional interfaces that make up crystal-phase and twinning superlattices in nanowires. We focus on two of their most paradigmatic building blocks: cubic (diamond/zinc blende) and hexagonal (lonsdaleite/wurtzite) polytypes of the same group-IV or III–V material. Specifically, we consider InP, GaP and Si, and both the twin boundaries between rotated cubic segments and the crystal-phase boundaries between different phases. We reveal the atomic-scale mechanisms that give rise to phonon scattering in these interfaces, quantify their thermal boundary resistance and illustrate the failure of common phenomenological models in predicting those features. In particular, we show that twin boundaries have a small but finite interface thermal resistance that can only be understood in terms of a fully atomistic picture., We acknowledge financial support by the Ministerio de Economía, Industria y Competitividad (MINECO) under grants FEDER-MAT2017-90024-P, TEC2015-67462-C2-1-R (MINECO/FEDER) and RTI2018-097876-B-C21 (MICINN/FEDER), the Severo Ochoa Centres of Excellence Program under Grant SEV-2015-0496 and by the Generalitat de Catalunya under grants no. 2014 SGR 301 and 2017 SGR 1506. M. L. S. is funded through a Juan de la Cierva fellowship. M. R. M. acknowledges support from FPU2016/02565., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Velocity saturation effect on low frequency noise in short channel single layer graphene field effect transistors

  • Mavredakis, Nikolaos
  • Wei, Wei
  • Pallecchi, Emiliano
  • Vignaud, Dominique
  • Happy, Henry
  • Garcia Cortadella, Ramon
  • Bonaccini Calia, Andrea
  • Garrido, Jose A.
  • Jiménez, David
Graphene devices for analog and radio frequency (RF) applications are prone to low frequency noise (LFN) due to its up conversion to undesired phase noise at higher frequencies. Such applications demand the use of short channel graphene transistors (GFETs) that operate at high electric fields in order to ensure a high speed. Electric field is inversely proportional to device length and proportional to channel potential, so it gets maximized as the drain voltage increases and the transistor's length shrinks. Under these conditions though, short channel effects like velocity saturation (VS) should be considered. The reduction of LFN data due to the VS effect at short channel GFETs operating at high drain potential is for the first time shown in the present work. Carrier number and mobility fluctuations have been proven to be the main sources that generate LFN in GFETs. While their contribution to the bias dependence of LFN in long channels has been thoroughly investigated, the way in which VS phenomenon affects LFN in short channel devices under high drain voltage conditions has not been well understood. In this paper we have proposed a physics-based analytical LFN model that works under both low and high electric field conditions. The implemented model is validated with experimental data from CVD grown back-gated single layer GFETs operating at gigahertz frequencies. The model accurately captures the reduction of LFN especially near the charge neutrality point because of the effect of the VS mechanism. Moreover, an analytical expression for the effect of contact resistance on LFN is derived. This contact resistance contribution is experimentally shown to be dominant at high gate voltages and is accurately described by the proposed model. The noise parameter related to LFN at contacts is found to have an exponential dependence with contact resistance, and to our knowledge, this is shown for the first time., This work was funded by the Ministerio de Economía y Competitividad under the project TEC2015-67462-C2-1-R and the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. GrapheneCore2 785219 (Graphene Flagship), Marie Skłodowska-Curie Grant Agreement No 665919 and Grant Agreement No. 732032 (BrainCom). This work was also partly supported by the French RENATECH network. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Experimental demonstration of the suppression of optical phonon splitting in 2D materials by Raman spectroscopy

  • De Luca, Marta
  • Cartoixà, Xavier
  • Indolese, David I.
  • Martín-Sánchez, Javier
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Schönenberger, Christian
  • Trotta, Rinaldo
  • Rurali, Riccardo
  • Zardo, Ilaria
Raman spectroscopy is one of the most extended experimental techniques to investigate thin-layered 2D materials. For a complete understanding and modeling of the Raman spectrum of a novel 2D material, it is often necessary to combine the experimental investigation to density functional theory calculations. We provide the experimental proof of the fundamentally different behavior of polar 2D vs 3D systems regarding the effect of the dipole − dipole interactions, which in 2D systems ultimately lead to the absence of optical phonons splitting, otherwise present in 3D materials. We demonstrate that non-analytical corrections (NACs) should not be applied to properly model the Raman spectra of few-layered 2D materials, such as WSe2 and h-BN, corroborating recent theoretical predictions (Sohier et al 2017 Nano Lett. 17 3758–63). Our findings are supported by measurements performed on tilted samples that allow increasing the component of photon momenta in the plane of the flake, thus unambiguously setting the direction of an eventual NAC. We also investigate the influence of the parity of the number of layers and of the type of layer-by-layer stacking on the effect of NACs on the Raman spectra., I Z acknowledges the Swiss National Science Foundation research grant (Project Grant No. 200021_165784). M D L acknowledges support from the Swiss National Science Foundation Ambizione grant (Grant No. PZ00P2_179801). R R acknowledges support from the Ministerio de Economía, Industria y Competitividad (MINECO) under grant FEDER-MAT2017-90024-P and the Severo Ochoa Centres of Excellence Program under grant SEV-2015-0496 and by the Generalitat de Catalunya under Grant Nos. 2017 SGR 1506. X C acknowledges financial support by the Ministerio de Economía, Industria y Competitividad under grant TEC2015-67462-C2-1-R (MINECO/FEDER), the Ministerio de Ciencia, Innovación y Universidades under Grant No. RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), and the EU Horizon2020 research and innovation program under Grant No. GrapheneCore2: 785219. C S and D I acknowledge support by the Swiss Nanoscience Institute (SNI), the ERC project TopSupra (787414), the European Union Horizon 2020 research and innovation program under grant agreement No. 785219 (Graphene Flagship), the Swiss National Science Foundation and the Swiss NCCR QSIT. J.M.-S. acknowledges support through a Clarín Marie Curie-COFUND grant from the Government of the Principality of Asturias and the EU (PA-18-ACB17-29), and the Ramón y Cajal Program (RYC2018-026196-I) from the Government of Spain. R T acknowledges support by European Union's Horizon 2020 research and innovation programme (SPQRel grant agreement no. 679183). K W and T T acknowledge support from the Elemental Strategy Initiative conducted by the MEXT, Japan and the CREST(JPMJCR15F3), JST., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New insights in the lattice dynamics of monolayers, bilayers, and trilayers of WSe2 and unambiguous determination of few-layer-flakes' thickness

  • De Luca, Marta
  • Cartoixà, Xavier
  • Martín-Sánchez, Javier
  • López Suárez, Miquel
  • Trotta, Rinaldo
  • Rurali, Riccardo
  • Zardo, Ilaria
Among the most common few-layers transition metal dichalcogenides (TMDs), WSe2 is the most challenging material from the lattice dynamics point of view. Indeed, for a long time the main two phonon modes (A1g and ) have been wrongly assigned. In the last few years, these two modes have been properly interpreted, and their quasi-degeneracy in the monolayer has been used for its identification. In this work, we show that this approach has a limited validity and we propose an alternative, more general approach, based on multi-phonon bands. Moreover, we show and interpret all the peaks (about 40) appearing in the Raman spectra of monolayers, bilayers, and trilayers of WSe2 by combining experimental wavelength- and polarization-dependent Raman studies with density-functional theory calculations providing the phonon dispersions, the polarization-resolved first-order Raman spectra, and the two-phonon density of states. This complete study not only offers a method to distinguish between monolayers, bilayers, and trilayers with no need of optical images and atomic force microscopy, but it also sheds light on the interpretation of single and multi-phonon bands appearing in the inelastic light scattering experiments of layered WSe2; some of these bands were never observed before, and some were observed and uncertainly assigned. We promote the full understanding of the lattice dynamics of this material that is crucial for the realization of optoelectronics devices and of novel phononic metamaterials, such as TMDs superlattices., This project has received funding from the Swiss National Science Foundation research grant (Project Grant No. 200021_165784). MDL acknowledges support from the Swiss National Science Foundation Ambizione grant (Grant No. PZ00P2_179801). RR acknowledges financial support by the Ministerio de Economía, Industria y Competitividad (MINECO) under grant FEDER-MAT2017-90024-P and the Severo Ochoa Centres of Excellence Program under grant SEV-2015-0496 and by the Generalitat de Catalunya under Grant No. 2017 SGR 1506. XC acknowledges financial support by the Ministerio de Economía, Industria y Competitividad under grant TEC2015-67462-C2-1-R (MINECO/FEDER), the Ministerio de Ciencia, Innovación y Universidades under Grant No. RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), and the EU Horizon2020 research and innovation program under Grant No. GrapheneCore2 785219. MLS is funded through a Juan de la Cierva fellowship. JM-S acknowledges support through the Clarín Programme from the Government of the Principality of Asturias and a Marie Curie-COFUND European Grant (PA-18-ACB17-29). RT Acknowledges support by European Union's Horizon 2020 research and innovation programme (SPQRel Grant Agreement No. 679183)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bias dependent variability of low-frequency noise in single-layer graphene FETs

  • Mavredakis, Nikolaos
  • Garcia Cortadella, Ramon
  • Illa, Xavi
  • Schäfer, Nathan
  • Bonaccini Calia, Andrea
  • Guimerà-Brunet, Anton
  • Garrido, Jose A.
  • Jiménez, David
Low-frequency noise (LFN) variability in graphene transistors (GFETs) is for the first time researched in this work under both experimental and theoretical aspects. LFN from an adequate statistical sample of long-channel solution-gated single-layer GFETs is measured in a wide range of operating conditions while a physics-based analytical model is derived that accounts for the bias dependence of LFN variance with remarkable performance. LFN deviations in GFETs stem from the variations of the parameters of the physical mechanisms that generate LFN, which are the number of traps (Ntr) for the carrier number fluctuation effect (ΔN) due to trapping/detrapping process and the Hooge parameter (αH) for the mobility fluctuations effect (Δμ). ΔN accounts for an M-shape of normalized LFN variance versus gate bias with a minimum at the charge neutrality point (CNP) as it was the case for normalized LFN mean value while Δμ contributes only near the CNP for both variance and mean value. Trap statistical nature of the devices under test is experimentally shown to differ from classical Poisson distribution noticed at silicon-oxide devices, and this might be caused both by the electrolyte interface in GFETs under study and by the premature stage of the GFET technology development which could permit external factors to influence the performance. This not fully advanced GFET process growth might also cause pivotal inconsistencies affecting the scaling laws in GFETs of the same process., This work was funded by the European Union's Horizon 2020 research and innovation program under Grant Agreement No. GrapheneCore2 785219 and No. GrapheneCore3 881603, Marie Skłodowska-Curie Grant Agreement No. 665919 and Grant Agreement No. 732032 (BrainCom). We also acknowledge financial support by Spanish government under the projects TEC2015-67462-C2-1-R, RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE) and project 001-P-001702-GraphCat: Communitat Emergent de grafè a Catalunya, co-funded by FEDER within the framework of Programa Operatiu FEDER de Catalunya 2014–2020. The ICN2 is also supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Large-signal model of graphene field-effect transistors. Part I, compact modeling of GFET intrinsic capacitances

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Jiménez, David|||0000-0002-8148-198X
We present a circuit-compatible compact model of the intrinsic capacitances of graphene field-effect transistors (GFETs). Together with a compact drain current model, a large-signal model of GFETs is developed combining both models as a tool for simulating the electrical behavior of graphene-based integrated circuits, dealing with the DC, transient behavior, and frequency response of the circuit. The drain current model is based in a drift-diffusion mechanism for the carrier transport coupled with an appropriate field-effect approach. The intrinsic capacitance model consists of a 16-capacitance matrix including self-capacitances and transcapacitances of a four-terminal GFET. To guarantee charge conservation, a Ward-Dutton linear charge partition scheme has been used. The large-signal model has been implemented in Verilog-A, being compatible with conventional circuit simulators and serving as a starting point toward the complete GFET device model that could incorporate additional non-idealities.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Large-signal model of graphene field-effect transistors. Part II, circuit performance benchmarking

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Jiménez, David|||0000-0002-8148-198X
This paper presents a circuit performance benchmarking using the large-signal model of graphene field effect transistor reported in Part I of this two-part paper. To test the model, it has been implemented in a circuit simulator. Specifically we have simulated a high-frequency performance amplifier, together with other circuits that take advantage of the ambipolarity of graphene, such as a frequency doubler, a radio-frequency subharmonic mixer and a multiplier phase detector. A variety of simulations comprising DC, transient dynamics, Bode diagram, S-parameters, and power spectrum have been compared with experimental data to assess the validity of the model.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Short channel effects in graphene-based field effect transistors targeting radio-frequency applications

  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Jiménez, David|||0000-0002-8148-198X
  • Cartoixà, Xavier|||0000-0003-1905-5979
Channel length scaling in graphene field effect transistors (GFETs) is key in the pursuit of higher performance in radio frequency electronics for both rigid and flexible substrates. Although twodimensional (2D) materials provide a superior immunity to short channel effects (SCEs) than bulk materials, they could dominate in scaled GFETs. In this work, we have developed a model that calculates electron and hole transport along the graphene channel in a drift-diffusion basis, while considering the 2D electrostatics. Our model obtains the self-consistent solution of the 2D Poisson's equation coupled to the current continuity equation, the latter embedding an appropriate model for drift velocity saturation.Wehave studied the role played by the electrostatics and the velocity saturation in GFETs with short channel lengths L. Severe scaling results in a high degradation of GFET output conductance. The extrinsic cutoff frequency follows a 1/L^n scaling trend,where the index n fulfills n < 2. The case n = 2 corresponds to long-channel GFETs with low source/drain series resistance, that is, devices where the channel resistance is controlling the drain current. For high series resistance, n decreases down to n = 1, and it degrades to values of n < 1 because of the SCEs, especially at high drain bias. The model predicts high máximum oscillation frequencies above 1 THz for channel lengths below 100 nm, but, in order to obtain these frequencies, it is very important to minimize the gate series resistance. The model shows very good agreement with experimental current voltage curves obtained from short channel GFETs and also reproduces negative differential resistance, which is due to a reduction of diffusion current.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal transport in porous Si nanowires from approach-to-equilibrium molecular dynamics calculations

  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Dettori, Riccardo|||0000-0002-4678-1098
  • Melis, Claudio|||0000-0002-5768-8403
  • Colombo, Luciano|||0000-0001-5335-4652
  • Rurali, Riccardo|||0000-0002-4086-4191
We study thermal transport in porous Si nanowires (SiNWs) by means of approach-to-equilibrium molecular dynamics simulations. We show that the presence of pores greatly reduces the thermal conductivity, κ, of the SiNWs as long mean free path phonons are suppressed. We address explicitly the dependence of κ on different features of the pore topology-such as the porosity and the pore diameter-and on the nanowire (NW) geometry-diameter and length. We use the results of the molecular dynamics calculations to tune an effective model, which is capable of capturing the dependence of κ on porosity and NW diameter. The model illustrates the failure of Matthiessen's rule to describe the coupling between boundary and pore scattering, which we account for by the inclusion of an additional empirical term.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The role of the Fermi level pinning in gate tunable graphene-semiconductor junctions

  • Chaves Romero, Ferney Alveiro|||0000-0001-9506-4485
  • Jiménez, David|||0000-0002-8148-198X
Graphene based transistors relying on a conventional structure cannot switch properly because of the absence of an energy gap in graphene. To overcome this limitation, a barristor device was proposed, whose operation is based on the modulation of the graphene-semiconductor (GS) Schottky barrier by means of a top gate, and demonstrating an ON-OFF current ratio up to 10⁵. Such a large number is likely due to the realization of an ultra clean interface with virtually no interface trapped charge. However, it is indeed technologically relevant to know the impact that the interface trapped charges might have on the barristor's electrical properties. We have developed a physics based model of the gate tunable GS heterostructure where non-idealities such as Fermi Level Pinning (FLP) and a "bias dependent barrier lowering effect" has been considered. Using the model we have made a comprehensive study of the barristor's expected digital performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Full-field thermal imaging of quasiballistic crosstalk reduction in nanoscale devices

  • Ziabari, Amir Koushyar|||0000-0003-4776-457X
  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Vermeersch, Bjorn
  • Xuan, Yi
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Torelló, Alvar
  • Bahk, Je-Hyeong
  • Koh, Yee Rui
  • Parsa, Maryam
  • Ye, Peide D.
  • Alvarez, F. Xavier|||0000-0001-6746-2144
  • Shakouri, Ali
Understanding nanoscale thermal transport is of substantial importance for designing contemporary semiconductor technologies. Heat removal from small sources is well established to be severely impeded compared to diffusive predictions due to the ballistic nature of the dominant heat carriers. Experimental observations are commonly interpreted through a reduction of effective thermal conductivity, even though most measurements only probe a single aggregate thermal metric. Here, we employ thermoreflectance thermal imaging to directly visualise the 2D temperature field produced by localised heat sources on InGaAs with characteristic widths down to 100 nm. Besides displaying effective thermal performance reductions up to 50% at the active junctions in agreement with prior studies, our steady-state thermal images reveal that, remarkably, 1-3 μm adjacent to submicron devices the crosstalk is actually reduced by up to fourfold. Submicrosecond transient imaging additionally shows responses to be faster than conventionally predicted. A possible explanation based on hydrodynamic heat transport, and some open questions, are discussed. When thermal fields in semiconductors approach the submicron scale, non-diffusive heat transport is observed where Fourier based heat transport models fail. Here, the authors use thermal imaging to visualise these thermal field variations and in turn derive a hydrodynamic heat transport model.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Scaling properties of polycrystalline graphene, A review

  • Isacsson, Andreas
  • Cummings, Aron|||0000-0003-2307-497X
  • Colombo, Luciano|||0000-0001-5335-4652
  • Colombo, Luigi|||0000-0002-9048-3565
  • Kinaret, Jari M.
  • Roche, Stephan|||0000-0003-0323-4665
We present an overview of the electrical, mechanical, and thermal properties of polycrystalline graphene. Most global properties of this material, such as the charge mobility, thermal conductivity, or Young's modulus, are sensitive to its microstructure, for instance the grain size and the presence of line or point defects. Both the local and global features of polycrystalline graphene have been investigated by a variety of simulations and experimental measurements. In this review, we summarize the properties of polycrystalline graphene, and by establishing a perspective on how the microstructure impacts its large-scale physical properties, we aim to provide guidance for further optimization and improvement of applications based on this material, such as flexible and wearable electronics, and high-frequency or spintronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermoelectric photosensor based on ultrathin single-crystalline Si films

  • Gonçalves Dalkiranis Pereira, Gustavo
  • Ferrando-Villalba, Pablo|||0000-0002-0858-531X
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Abad, Llibertat|||0000-0003-2637-8629
  • Rodríguez-Viejo, Javier|||0000-0002-9735-263X
Ultrathin Si films have a reduced thermal conductivity in comparison to Si bulk due to phonon scattering at the surfaces. Furthermore, the small thickness guarantees a reduced thermal mass (in the µJ/K range), which opens up the possibility of developing thermal sensors with a high sensitivity. Based on these premises, a thermoelectric (TE) microsensor based on ultrathin suspended Si films was developed and used as a thermal photosensor. The photoresponse of the device was evaluated with an argon laser (λ = 457 nm) with a variable power ranging from 0 to 10 mW in air at atmospheric pressure, with laser diodes at 406 nm, 520 nm and 638 nm wavelengths, and fixed powers in high vacuum conditions. The responsivity per unit area, response time (τ) and detectivity (D*) of the device were determined in air at ambient pressure, being 2.6 × 10⁷ V/Wm², ~4.3 ms and 2.86 × 10 7 c m H z (1 / 2) W - 1, respectively. Temperature differences up to 30 K between the central hot region and the Si frame were achieved during open-circuit voltage measurements, with and without laser diodes. During illumination, the photogeneration of carriers caused a slight reduction of the Seebeck coefficient, which did not significantly change the sensitivity of the device. Moreover, the measurements performed with light beam chopped at different frequencies evidenced the quick response of the device. The temperature gradients applied to the thermoelectric Si legs were corrected using finite element modeling (FEM) due to the non-flat temperature profile generated during the experiments.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal boundary resistance in semiconductors by non-equilibrium thermodynamics

  • Dettori, Riccardo|||0000-0002-4678-1098
  • Melis, Claudio|||0000-0002-5768-8403
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Colombo, Luciano|||0000-0001-5335-4652
We critically address the problem of predicting the thermal boundary resistance at the interface between two semiconductors by atomistic simulations. After reviewing the available models, lattice dynamics calculations and molecular dynamics simulation protocols, we reformulate this problem in the language of non-equilibrium thermodynamics, providing an elegant, robust and valuable theoretical framework for the direct calculation of the thermal boundary resistance through molecular dynamics simulations. The foundation of the method, as well as its subtleties and the details of its actual implementation are presented. Finally, the Si/Ge interface showcase is discussed as the prototypical example of semiconductor heterojunction whose thermal properties are paramount in many front-edge nanotechnologies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Heat transport through a solid-solid junction, The interface as an autonomous thermodynamic system

  • Rurali, Riccardo|||0000-0002-4086-4191
  • Colombo, Luciano|||0000-0001-5335-4652
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Øivind, Wilhelmsen
  • Trinh, Thuat T.
  • Bedeaux, Dick
  • Kjelstrup, Signe
We perform computational experiments using nonequilibrium molecular dynamics simulations, showing that the interface between two solid materials can be described as an autonomous thermodynamic system. We verify the local equilibrium and give support to the Gibbs description of the interface also away from the global equilibrium. In doing so, we reconcile the common formulation of the thermal boundary resistance as the ratio between the temperature discontinuity at the interface and the heat flux with a more rigorous derivation from nonequilibrium thermodynamics. We also show that thermal boundary resistance of a junction between two pure solid materials can be regarded as an interface property, depending solely on the interface temperature, as implicitly assumed in some widely used continuum models, such as the acoustic mismatch model. Thermal rectification can be understood on the basis of different interface temperatures for the two flow directions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A proposal for evading the measurement uncertainty in classical and quantum computing, Application to a resonant tunneling diode and a Mach-Zehnder interferometer

  • Pandey, Devashish|||0000-0003-0349-6913
  • Bellentani, Laura|||0000-0002-8048-0088
  • Villani, Matteo|||0000-0003-1315-7851
  • Albareda, Guillermo|||0000-0002-2181-7023
  • Bordone, Paolo
  • Oriols, Xavier|||0000-0003-2181-4284
Measuring properties of quantum systems is governed by a stochastic (collapse or state-reduction) law that unavoidably yields an uncertainty (variance) associated with the corresponding mean values. This non-classical source of uncertainty is known to be manifested as noise in the electrical current of nanoscale electron devices, and hence it can flaw the good performance of more complex quantum gates. We propose a protocol to alleviate this quantum uncertainty that consists of (i) redesigning the device to accommodate a large number of electrons inside the active region, either by enlarging the lateral or longitudinal areas of the device and (ii) re-normalizing the total current to the number of electrons. How the above two steps can be accommodated using the present semiconductor technology has been discussed and numerically studied for a resonant tunneling diode and a Mach-Zehnder interferometer, for classical and quantum computations, respectively. It is shown that the resulting protocol formally resembles the so-called collective measurements, although, its practical implementation is substantially different.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

GFET asymmetric transfer response analysis through access region resistances

  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Gonzalez Medina, Jose Maria
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Jiménez, David|||0000-0002-8148-198X
  • Godoy Medina, Andres|||0000-0002-3014-8765
Graphene-based devices are planned to augment the functionality of Si and III-V based technology in radio-frequency (RF) electronics. The expectations in designing graphene field-effect transistors (GFETs) with enhanced RF performance have attracted significant experimental efforts, mainly concentrated on achieving high mobility samples. However, little attention has been paid, so far, to the role of the access regions in these devices. Here, we analyse in detail, via numerical simulations, how the GFET transfer response is severely impacted by these regions, showing that they play a significant role in the asymmetric saturated behaviour commonly observed in GFETs. We also investigate how the modulation of the access region conductivity (i.e., by the influence of a back gate) and the presence of imperfections in the graphene layer (e.g., charge puddles) affects the transfer response. The analysis is extended to assess the application of GFETs for RF applications, by evaluating their cut-off frequency.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Velocity Saturation Effect on Low Frequency Noise in Short Channel Single Layer Graphene Field Effect Transistors

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Wei, Wei
  • Pallecchi, Emiliano|||0000-0002-8682-7935
  • Vignaud, Dominique
  • Happy, Henri|||0000-0003-2065-8080
  • Garcia Cortadella, Ramon|||0000-0002-1506-6534
  • Bonaccini Calia, Andrea|||0000-0002-7873-4296
  • Garrido, Jose|||0000-0001-5621-1067
  • Jiménez, David|||0000-0002-8148-198X
Graphene devices for analog and radio frequency (RF) applications are prone to low frequency noise (LFN) due to its up conversion to undesired phase noise at higher frequencies. Such applications demand the use of short channel graphene transistors (GFETs) that operate at high electric fields in order to ensure a high speed. Electric field is inversely proportional to device length and proportional to channel potential, so it gets maximized as the drain voltage increases and the transistor's length shrinks. Under these conditions though, short channel effects like velocity saturation (VS) should be considered. The reduction of LFN data due to the VS effect at short channel GFETs operating at high drain potential is for the first time shown in the present work. Carrier number and mobility fluctuations have been proven to be the main sources that generate LFN in GFETs. While their contribution to the bias dependence of LFN in long channels has been thoroughly investigated, the way in which VS phenomenon affects LFN in short channel devices under high drain voltage conditions has not been well understood. In this paper we have proposed a physics-based analytical LFN model that works under both low and high electric field conditions. The implemented model is validated with experimental data from CVD grown back-gated single layer GFETs operating at gigahertz frequencies. The model accurately captures the reduction of LFN especially near the charge neutrality point because of the effect of the VS mechanism. Moreover, an analytical expression for the effect of contact resistance on LFN is derived. This contact resistance contribution is experimentally shown to be dominant at high gate voltages and is accurately described by the proposed model. The noise parameter related to LFN at contacts is found to have an exponential dependence with contact resistance, and to our knowledge, this is shown for the first time.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Large-signal model of 2DFETs, compact modeling of terminal charges and intrinsic capacitances

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Park, Saungeun
  • Akinwande, Deji|||0000-0001-7133-5586
  • Jiménez, David|||0000-0002-8148-198X
We present a physics-based circuit-compatible model for double-gated two-dimensional semiconductor-based field-effect transistors, which provides explicit expressions for the drain current, terminal charges, and intrinsic capacitances. The drain current model is based on the drift-diffusion mechanism for the carrier transport and considers Fermi-Dirac statistics coupled with an appropriate field-effect approach. The terminal charge and intrinsic capacitance models are calculated adopting a Ward-Dutton linear charge partition scheme that guarantees charge conservation. It has been implemented in Verilog-A to make it compatible with standard circuit simulators. In order to benchmark the proposed modeling framework we also present experimental DC and high-frequency measurements of a purposely fabricated monolayer MoS-FET showing excellent agreement between the model and the experiment and thus demonstrating the capabilities of the combined approach to predict the performance of 2DFETs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Phonon transport across crystal-phase interfaces and twin boundaries in semiconducting nanowires

  • Carrete, Jesús|||0000-0003-0971-1098
  • López-Suárez, Miquel|||0000-0003-2338-277X
  • Raya Moreno, Martí|||0000-0001-6190-9769
  • Bochkarev, Anton S.
  • Royo Valls, Miquel|||0000-0001-7601-3754
  • Madsen, Georg Kent Hellerup|||0000-0001-9844-9145
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Mingo, Natalio
  • Rurali, Riccardo|||0000-0002-4086-4191
We combine state-of-the-art Green's-function methods and nonequilibrium molecular dynamics calculations to study phonon transport across the unconventional interfaces that make up crystal-phase and twinning superlattices in nanowires. We focus on two of their most paradigmatic building blocks: cubic (diamond/zinc blende) and hexagonal (lonsdaleite/wurtzite) polytypes of the same group-IV or III-V material. Specifically, we consider InP, GaP and Si, and both the twin boundaries between rotated cubic segments and the crystal-phase boundaries between different phases. We reveal the atomic-scale mechanisms that give rise to phonon scattering in these interfaces, quantify their thermal boundary resistance and illustrate the failure of common phenomenological models in predicting those features. In particular, we show that twin boundaries have a small but finite interface thermal resistance that can only be understood in terms of a fully atomistic picture.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Understanding the bias dependence of low frequency noise in single layer graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Garcia Cortadella, Ramon|||0000-0002-1506-6534
  • Bonaccini Calia, Andrea|||0000-0002-7873-4296
  • Garrido, Jose|||0000-0001-5621-1067
  • Jiménez, David|||0000-0002-8148-198X
This letter investigates the bias-dependent low frequency noise of single layer graphene field-effect transistors. Noise measurements have been conducted with electrolyte-gated graphene transistors covering a wide range of gate and drain bias conditions for different channel lengths. A new analytical model that accounts for the propagation of the local noise sources in the channel to the terminal currents and voltages is proposed in this paper to investigate the noise bias dependence. Carrier number and mobility fluctuations are considered as the main causes of low frequency noise and the way these mechanisms contribute to the bias dependence of the noise is analyzed in this work. Typically, normalized low frequency noise in graphene devices has been usually shown to follow an M-shape dependence versus gate voltage with the minimum near the charge neutrality point (CNP). Our work reveals for the first time the strong correlation between this gate dependence and the residual charge which is relevant in the vicinity of this specific bias point. We discuss how charge inhomogeneity in the graphene channel at higher drain voltages can contribute to low frequency noise; thus, channel regions nearby the source and drain terminals are found to dominate the total noise for gate biases close to the CNP. The excellent agreement between the experimental data and the predictions of the analytical model at all bias conditions confirms that the two fundamental 1/f noise mechanisms, carrier number and mobility fluctuations, must be considered simultaneously to properly understand the low frequency noise in graphene FETs. The proposed analytical compact model can be easily implemented and integrated in circuit simulators, which can be of high importance for graphene based circuits' design.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Phonon Engineering in Twinning Superlattice Nanowires

  • De Luca, Marta|||0000-0001-6061-3261
  • Fasolato, Claudia
  • Verheijen, Marcel A.
  • Ren, Yizhen
  • Swinkels, Milo Y.
  • Kölling, Sebastian
  • Bakkers, Erik P. A. M.
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Zardo, Ilaria|||0000-0002-8685-2305
One of the current challenges in nanoscience is tailoring the phononic properties of a material. This has long been a rather elusive task because several phonons have wavelengths in the nanometer range. Thus, high quality nanostructuring at that length-scale, unavailable until recently, is necessary for engineering the phonon spectrum. Here we report on the continuous tuning of the phononic properties of a twinning superlattice GaP nanowire by controlling its periodicity. Our experimental results, based on Raman spectroscopy and rationalized by means of ab initio theoretical calculations, give insight into the relation between local crystal structure, overall lattice symmetry, and vibrational properties, demonstrating how material engineering at the nanoscale can be successfully employed in the rational design of the phonon spectrum of a material.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Photoresponse of Graphene-Gated Graphene-GaSe Heterojunction Devices

  • Kim, Wonjae
  • Arpiainen, Sanna
  • Xue, Hui
  • Soikkeli, Miika
  • Qi, Mei
  • Sun, Zhipei
  • Lipsanen, Harri|||0000-0003-2487-4645
  • Chaves Romero, Ferney Alveiro|||0000-0001-9506-4485
  • Jiménez, David|||0000-0002-8148-198X
  • Prunnila, Mika
Because of their extraordinary physical properties, low-dimensional materials including graphene and gallium selenide (GaSe) are promising for future electronic and optoelectronic applications, particularly in transparent-flexible photodetectors. Currently, the photodetectors working at the near-infrared spectral range are highly indispensable in optical communications. However, the current photodetector architectures are typically complex, and it is normally difficult to control the architecture parameters. Here, we report graphene-GaSe heterojunction-based field-effect transistors with broadband photodetection from 730-1550 nm. Chemical-vapor-deposited graphene was employed as transparent gate and contact electrodes with tunable resistance, which enables effective photocurrent generation in the heterojunctions. The photoresponsivity was shown from 10 to 0.05 mA/W in the near-infrared region under the gate control. To understand behavior of the transistor, we analyzed the results via simulation performed using a model for the gate-tunable graphene-semiconductor heterojunction where possible Fermi level pinning effect is considered.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Low-frequency noise parameter extraction method for single-layer graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Wei, Wei
  • Pallecchi, Emiliano|||0000-0002-8682-7935
  • Vignaud, Dominique
  • Happy, Henri|||0000-0003-2065-8080
  • Garcia Cortadella, Ramon|||0000-0002-1506-6534
  • Schaefer, Nathan|||0000-0002-2392-3858
  • Bonaccini Calia, Andrea|||0000-0002-7873-4296
  • Garrido, Jose|||0000-0001-5621-1067
  • Jiménez, David|||0000-0002-8148-198X
In this article, a detailed parameter extraction methodology is proposed for low-frequency noise (LFN) in single-layer (SL) graphene transistors (GFETs) based on a recently established compact LFN model. The drain current and LFN of two short channel back-gated GFETs (L = 300 and 100 nm) were measured at lower and higher drain voltages, for a wide range of gate voltages covering the region away from charge neutrality point (CNP) up to CNP at p-type operation region. Current-voltage (IV) and LFN data were also available from a long-channel SL top solution-gated (SG) GFET (L = 5 μm), for both p- and n-type regions near and away CNP. At each of these regimes, the appropriate IV and LFN parameters can be accurately extracted. Regarding LFN, mobility fluctuation effect is dominant at CNP, and from there, the Hooge parameter α can be extracted, whereas the carrier number fluctuation contribution which is responsible for the well-known M-shape bias dependence of output noise divided by squared drain current, also observed in our data, makes possible the extraction of the N parameter related to the number of traps. In the less possible case of a Λ-shape trend, N and α can be extracted simultaneously from the region near CNP. Away from CNP, contact resistance can have a significant contribution to LFN, and from there, the relevant parameter SΔ R is defined. The LFN parameters described above can be estimated from the low drain voltage region of operation where the effect of velocity saturation (VS) mechanism is negligible. VS effect results in the reduction of LFN at higher drain voltages, and from there, the IV parameter hΩ which represents the phonon energy and is related to VS effect can be derived both from drain current and LFN data.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Bias dependent variability of low-frequency noise in single-layer graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Garcia Cortadella, Ramon|||0000-0002-1506-6534
  • Illa, Xavi|||0000-0002-3212-1128
  • Schaefer, Nathan|||0000-0002-2392-3858
  • Bonaccini Calia, Andrea|||0000-0002-7873-4296
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Garrido, Jose|||0000-0001-5621-1067
  • Jiménez, David|||0000-0002-8148-198X
Low-frequency noise (LFN) variability in graphene transistors (GFETs) is for the first time researched in this work under both experimental and theoretical aspects. LFN from an adequate statistical sample of long-channel solution-gated single-layer GFETs is measured in a wide range of operating conditions while a physics-based analytical model is derived that accounts for the bias dependence of LFN variance with remarkable performance. LFN deviations in GFETs stem from the variations of the parameters of the physical mechanisms that generate LFN, which are the number of traps (Ntr) for the carrier number fluctuation effect (ΔN) due to trapping/detrapping process and the Hooge parameter (αH) for the mobility fluctuations effect (Δμ). ΔN accounts for an M-shape of normalized LFN variance versus gate bias with a minimum at the charge neutrality point (CNP) as it was the case for normalized LFN mean value while Δμ contributes only near the CNP for both variance and mean value. Trap statistical nature of the devices under test is experimentally shown to differ from classical Poisson distribution noticed at silicon-oxide devices, and this might be caused both by the electrolyte interface in GFETs under study and by the premature stage of the GFET technology development which could permit external factors to influence the performance. This not fully advanced GFET process growth might also cause pivotal inconsistencies affecting the scaling laws in GFETs of the same process. This journal is.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal rectification in silicon by a graded distribution of defects

  • Dettori, Riccardo|||0000-0002-4678-1098
  • Melis, Claudio|||0000-0002-5768-8403
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Colombo, Luciano|||0000-0001-5335-4652
We discuss about computer experiments based on nonequilibrium molecular dynamics simulations providing evidence that thermal rectification can be obtained in bulk Si by a non-uniform distribution of defects. We consider a graded population of both Ge substitutional defects and nanovoids, distributed along the direction of an applied thermal bias, and predict a rectification factor comparable to what is observed in other low-dimensional Si-based nanostructures. By considering several defect distribution profiles, thermal bias conditions, and sample sizes, the present results suggest that a possible way for tuning the thermal rectification is by defect engineering.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Does carrier velocity saturation help to enhance f in graphene field-effect transistors?

  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Bonmann, Marlene|||0000-0001-5192-0606
  • Asad, Muhammad|||0000-0002-5204-932X
  • Yang, Xinxin|||0000-0003-4464-6922
  • Generalov, Andrey|||0000-0002-9546-9391
  • Vorobiev, Andrei|||0000-0003-2882-3191
  • Banszerus, Luca|||0000-0002-1855-1287
  • Stampfer, Christoph|||0000-0002-4958-7362
  • Otto, Martin|||0000-0001-6704-3468
  • Neumaier, Daniel|||0000-0002-7394-9159
  • Stake, Jan|||0000-0002-8204-7894
  • Jiménez, David|||0000-0002-8148-198X
It has been argued that current saturation in graphene field-effect transistors (GFETs) is needed to get optimal maximum oscillation frequency (f ). This paper investigates whether velocity saturation can help to get better current saturation and if that correlates with enhanced f . We have fabricated 500 nm GFETs with high extrinsic f (37 GHz), and later simulated with a drift-diffusion model augmented with the relevant factors that influence carrier velocity, namely: short-channel electrostatics, saturation velocity effect, graphene/dielectric interface traps, and self-heating effects. Crucially, the model provides microscopic details of channel parameters such as carrier concentration, drift and saturation velocities, allowing us to correlate the observed macroscopic behavior with the local magnitudes. When biasing the GFET so all carriers in the channel are of the same sign resulting in highly concentrated unipolar channel, we find that the larger the drain bias is, both closer the carrier velocity to its saturation value and the higher the f are. However, the highest f can be achieved at biases where there exists a depletion of carriers near source or drain. In such a situation, the highest f is not found in the velocity saturation regime, but where carrier velocity is far below its saturated value and the contribution of the diffusion mechanism to the current is comparable to the drift mechanism. The position and magnitude of the highest f depend on the carrier concentration and total velocity, which are interdependent and are also affected by the self-heating. Importantly, this effect was found to severely limit radio-frequency performance, reducing the highest f from ∼60 to ∼40 GHz.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Multi-scale analysis of radio-frequency performance of 2D-material based field-effect transistors

  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Gonzalez-Medina, J. M.
  • Ruiz, F. G.
  • Jiménez, David|||0000-0002-8148-198X
  • Godoy Medina, Andres|||0000-0002-3014-8765
Two-dimensional materials (2DMs) are a promising alternative to complement and upgrade high-frequency electronics. However, in order to boost their adoption, the availability of numerical tools and physically-based models able to support the experimental activities and to provide them with useful guidelines becomes essential. In this context, we propose a theoretical approach that combines numerical simulations and small-signal modeling to analyze 2DM-based FETs for radio-frequency applications. This multi-scale scheme takes into account non-idealities, such as interface traps, carrier velocity saturation, or short channel effects, by means of self-consistent physics-based numerical calculations that later feed the circuit level via a small-signal model based on the dynamic intrinsic capacitances of the device. At the circuit stage, the possibilities range from the evaluation of the performance of a single device to the design of complex circuits combining multiple transistors. In this work, we validate our scheme against experimental results and exemplify its use and capability assessing the impact of the channel scaling on the performance of MoS2-based FETs targeting RF applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Scaling of graphene field-effect transistors supported on hexagonal boron nitride, Radio-frequency stability as a limiting factor

  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Iglesias, José M.|||0000-0003-0834-1435
  • Martín, María J.
  • Rengel, Raul|||0000-0003-4976-2244
  • Li, Changfeng
  • Kim, Wonjae
  • Riikonen, Juha
  • Lipsanen, Harri|||0000-0003-2487-4645
  • Jiménez, David|||0000-0002-8148-198X
The quality of graphene in nanodevices has increased hugely thanks to the use of hexagonal boron nitride as a supporting layer. This paper studies to which extent hBN together with channel length scaling can be exploited in graphene field-effect transistors (GFETs) to get a competitive radio-frequency (RF) performance. Carrier mobility and saturation velocity were obtained from an ensemble Monte Carlo simulator that accounted for the relevant scattering mechanisms (intrinsic phonons, scattering with impurities and defects, etc). This information is fed into a self-consistent simulator, which solves the drift-diffusion equation coupled with the two-dimensional Poisson's equation to take full account of short channel effects. Simulated GFET characteristics were benchmarked against experimental data from our fabricated devices. Our simulations show that scalability is supposed to bring to RF performance an improvement that is, however, highly limited by instability. Despite the possibility of a lower performance, a careful choice of the bias point can avoid instability. Nevertheless, maximum oscillation frequencies are still achievable in the THz region for channel lengths of a few hundreds of nanometers.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Radio frequency performance projection and stability tradeoff of h-BN encapsulated graphene field-effect transistors

  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Iglesias, José M.|||0000-0003-0834-1435
  • Hamham, El Mokhtar|||0000-0002-1598-0895
  • Rengel, Raul|||0000-0003-4976-2244
  • Jiménez, David|||0000-0002-8148-198X
Hexagonal boron nitride encapsulation significantly improves carrier transport in graphene. This paper investigates the benefit of implementing the encapsulation technique in graphene field-effect transistors (GFETs) in terms of their intrinsic radio frequency (RF) performance, adding the effect of the series resistances at the terminals. For such a purpose, a drift-diffusion self-consistent simulator is prepared to get the GFET electrical characteristics. Both the mobility and saturation velocity are obtained by an ensemble Monte Carlo simulator upon considering the relevant scattering mechanisms that affect carrier transport. RF figures of merit are simulated using an accurate small-signal model. Results reveal that the cutoff frequency could scale up to the physical limit given by the inverse of the transit time. Projected maximum oscillation frequencies, in the order of few terahertz, are expected to exceed the values demonstrated by InP and Si-based RF transistors. The existing tradeoff between power gain and stability and the role played by the gate resistance are also studied. High power gain and stability are feasible even if the device is operated far away from current saturation. Finally, the benefits of device unilateralization and the exploitation of the negative differential resistance region to get negative-resistance gain are discussed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

New insights in the lattice dynamics of monolayers, bilayers, and trilayers of WSe2 and unambiguous determination of few-layer-flakes' thickness

  • De Luca, Marta|||0000-0001-6061-3261
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Martín Sánchez, Javier|||0000-0002-6601-9447
  • López-Suárez, Miquel|||0000-0003-2338-277X
  • Trotta, Rinaldo|||0000-0002-9515-6790
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Zardo, Ilaria|||0000-0002-8685-2305
Among the most common few-layers transition metal dichalcogenides (TMDs), WSe2 is the most challenging material from the lattice dynamics point of view. Indeed, for a long time the main two phonon modes (A 1g and) have been wrongly assigned. In the last few years, these two modes have been properly interpreted, and their quasi-degeneracy in the monolayer has been used for its identification. In this work, we show that this approach has a limited validity and we propose an alternative, more general approach, based on multi-phonon bands. Moreover, we show and interpret all the peaks (about 40) appearing in the Raman spectra of monolayers, bilayers, and trilayers of WSe2 by combining experimental wavelength- and polarization-dependent Raman studies with density-functional theory calculations providing the phonon dispersions, the polarization-resolved first-order Raman spectra, and the two-phonon density of states. This complete study not only offers a method to distinguish between monolayers, bilayers, and trilayers with no need of optical images and atomic force microscopy, but it also sheds light on the interpretation of single and multi-phonon bands appearing in the inelastic light scattering experiments of layered WSe2; some of these bands were never observed before, and some were observed and uncertainly assigned. We promote the full understanding of the lattice dynamics of this material that is crucial for the realization of optoelectronics devices and of novel phononic metamaterials, such as TMDs superlattices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Experimental demonstration of the suppression of optical phonon splitting in 2D materials by Raman spectroscopy

  • De Luca, Marta|||0000-0001-6061-3261
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Indolese, David I.|||0000-0002-9436-8994
  • Martín Sánchez, Javier|||0000-0002-6601-9447
  • Watanabe, Kenji|||0000-0003-3701-8119
  • Taniguchi, Takashi|||0000-0002-1467-3105
  • Schönenberger, Christian
  • Trotta, Rinaldo|||0000-0002-9515-6790
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Zardo, Ilaria|||0000-0002-8685-2305
Raman spectroscopy is one of the most extended experimental techniques to investigate thin-layered 2D materials. For a complete understanding and modeling of the Raman spectrum of a novel 2D material, it is often necessary to combine the experimental investigation to density functional theory calculations. We provide the experimental proof of the fundamentally different behavior of polar 2D vs 3D systems regarding the effect of the dipole - dipole interactions, which in 2D systems ultimately lead to the absence of optical phonons splitting, otherwise present in 3D materials. We demonstrate that non-analytical corrections (NACs) should not be applied to properly model the Raman spectra of few-layered 2D materials, such as WSe2 and h-BN, corroborating recent theoretical predictions (Sohier et al 2017 Nano Lett. 17 3758-63). Our findings are supported by measurements performed on tilted samples that allow increasing the component of photon momenta in the plane of the flake, thus unambiguously setting the direction of an eventual NAC. We also investigate the influence of the parity of the number of layers and of the type of layer-by-layer stacking on the effect of NACs on the Raman spectra.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Schottky barriers, emission regimes and contact resistances in 2H-1T' MoS2 lateral metal-semiconductor junctions from first-principles

  • Urquiza, Laura
  • Cartoixà, Xavier|||0000-0003-1905-5979
We have studied the finite bias transport properties of a 2H-1T' MoS2 lateral metal-semiconductor (M-S) junction by non-equilibrium Green's functions calculations, aimed at contacting the 2D channel in a field effect transistor. Our results indicate that (a) despite the fundamentally different electrostatics of line and planar dipoles, the Schottky barrier heights respond similarly to changes in doping and applied bias in 2D and 3D M-S junctions, (b) 2H-1T' MoS2 lateral junctions are free from Fermi level pinning, (c) armchair interfaces have superior contacting properties vs. zigzag interfaces, (d) 1T' contacts to p channels will present a reduced contact resistance by a factor of 4-10 with respect to n channels and (e) contacts to intermediately doped n (p) channels operate in the field (thermionic) emission regime. We also provide an improved procedure to experimentally determine the emission regime in 2D material junctions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal conductivity and phonon hydrodynamics in transition metal dichalcogenides from first-principles

  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Alvarez, F. Xavier|||0000-0001-6746-2144
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Rurali, Riccardo|||0000-0002-4086-4191
We carry out a systematic study of the thermal conductivity of four single-layer transition metal dichalcogenides, MX2 (M = Mo, W; X = S, Se) from first-principles by solving the Boltzmann transport equation (BTE). We compare three different theoretical frameworks to solve the BTE beyond the relaxation time approximation (RTA), using the same set of interatomic force constants computed within density functional theory (DFT), finding that the RTA severely underpredicts the thermal conductivity of MS2 materials. Calculations of the different phonon scattering relaxation times of the main collision mechanisms and their corresponding mean free paths (MFP) allow evaluating the expected hydrodynamic behaviour in the heat transport of such monolayers. These calculations indicate that despite of their low thermal conductivity, the present TMDs can exhibit large hydrodynamic effects, being comparable to those of graphene, especially for WSe2 at high temperatures.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal conductivity for III-V and II-VI semiconductor wurtzite and zinc-blende polytypes, the role of anharmonicity and phase space

  • Raya Moreno, Martí|||0000-0001-6190-9769
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Cartoixà, Xavier|||0000-0003-1905-5979
We calculate the lattice thermal conductivity (κ) for cubic (zinc-blende) and hexagonal (wurtzite) phases for eight semiconductors using ab initio calculations and solving the phonon Boltzmann transport equation, explaining the different behavior of the ratio κhex/κcub between the two phases. We show that this behavior depends on the relative importance of two antagonistic factors: anharmonicity, which we find to be always higher in the cubic phase, and the accessible phase space, which is higher for the less symmetric hexagonal phase. Based on that, we develop a method that predicts the most conducting phase - cubic or hexagonal - where other more heuristic approaches fail. We also present results for nanowires made of the same materials, showing the possibility to tune κhex/κcub over a wide range by modifying their diameter, thus making them attractive materials for complex phononic and thermoelectric applications and systems.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Indications of phonon hydrodynamics in telescopic silicon nanowires

  • Melis, Claudio|||0000-0002-5768-8403
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Alvarez, F. Xavier|||0000-0001-6746-2144
The validity of Fourier's law in telescopic nanowires is tested by means of molecular dynamics simulations. We observe that the radial dependence of the heat-flux profile, the temperature jump, and the appearance of vorticity obtained in molecular dynamics telescopic wires near the contact point acquire a hydrodynamic character, and we show that they are incompatible with Fourier's law. We propose the Guyer-Krumhansl equation as a generalization capable of capturing these hydrodynamic effects. Lattice-dynamics results show that the thermal average of the confined modes shows no radial dependence of the vibrating energy inside the wire. This means that hydrodynamic effects could not be related to the confinement effects in these small systems.