Skip to main content

MICRO AND NANO-FABRICATION, BIOMATERIALS, BIOSENSORS, MICROFLUIDICS AND THEIR APPLICATIONS

RYC-2013-12640

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Incorporación
Call Ramón y Cajal
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermoelectric photosensor based on ultrathin single-crystalline Si films

  • Gonçalves Dalkiranis Pereira, Gustavo
  • Ferrando-Villalba, Pablo|||0000-0002-0858-531X
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Abad, Llibertat|||0000-0003-2637-8629
  • Rodríguez-Viejo, Javier|||0000-0002-9735-263X
Ultrathin Si films have a reduced thermal conductivity in comparison to Si bulk due to phonon scattering at the surfaces. Furthermore, the small thickness guarantees a reduced thermal mass (in the µJ/K range), which opens up the possibility of developing thermal sensors with a high sensitivity. Based on these premises, a thermoelectric (TE) microsensor based on ultrathin suspended Si films was developed and used as a thermal photosensor. The photoresponse of the device was evaluated with an argon laser (λ = 457 nm) with a variable power ranging from 0 to 10 mW in air at atmospheric pressure, with laser diodes at 406 nm, 520 nm and 638 nm wavelengths, and fixed powers in high vacuum conditions. The responsivity per unit area, response time (τ) and detectivity (D*) of the device were determined in air at ambient pressure, being 2.6 × 10⁷ V/Wm², ~4.3 ms and 2.86 × 10 7 c m H z (1 / 2) W - 1, respectively. Temperature differences up to 30 K between the central hot region and the Si frame were achieved during open-circuit voltage measurements, with and without laser diodes. During illumination, the photogeneration of carriers caused a slight reduction of the Seebeck coefficient, which did not significantly change the sensitivity of the device. Moreover, the measurements performed with light beam chopped at different frequencies evidenced the quick response of the device. The temperature gradients applied to the thermoelectric Si legs were corrected using finite element modeling (FEM) due to the non-flat temperature profile generated during the experiments.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Measuring device and material ZT in a thin-film Si-based thermoelectric microgenerator

  • Ferrando-Villalba, Pablo|||0000-0002-0858-531X
  • Pérez-Marín, Antonio Pablo|||0000-0003-1843-8273
  • Abad, Llibertat|||0000-0003-2637-8629
  • Gonçalves Dalkiranis Pereira, Gustavo
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Garcia, Gemma|||0000-0003-3660-5928
  • Rodríguez-Viejo, Javier|||0000-0002-9735-263X
Thermoelectricity (TE) is proving to be a promising way to harvest energy for small applications and to produce a new range of thermal sensors. Recently, several thermoelectric generators (TEGs) based on nanomaterials have been developed, outperforming the efficiencies of many previous bulk generators. Here, we presented the thermoelectric characterization at different temperatures (from 50 to 350 K) of the Si thin-film based on Phosphorous (n) and Boron (p) doped thermocouples that conform to a planar micro TEG. The thermocouples were defined through selective doping by ion implantation, using boron and phosphorous, on a 100 nm thin Si film. The thermal conductivity, the Seebeck coefficient, and the electrical resistivity of each Si thermocouple was experimentally determined using the in-built heater/sensor probes and the resulting values were refined with the aid of finite element modeling (FEM). The results showed a thermoelectric figure of merit for the Si thin films of = 0.0093, at room temperature, which was about 12% higher than the bulk Si. In addition, we tested the thermoelectric performance of the TEG by measuring its own figure of merit, yielding a result of ZT = 0.0046 at room temperature.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Growth Monitoring with Submonolayer Sensitivity Via Real-Time Thermal-Conductance Measurements

  • Ferrando-Villalba, Pablo|||0000-0002-0858-531X
  • Takegami, Daisuke|||0000-0003-3832-1849
  • Abad, Llibertat|||0000-0003-2637-8629
  • Ràfols Ribé, Joan|||0000-0003-1256-149X
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Garcia, Gemma|||0000-0003-3660-5928
  • Rodríguez-Viejo, Javier|||0000-0002-9735-263X
Growth monitoring during the early stages of vapor deposition is of prime importance to understand the growth process, the microstructure, and thus the overall layer properties. We demonstrate that phonons can be used as an extremely sensitive probe to monitor the real-time evolution of film microstructure during growth, from incipient clustering to continuous film formation. For that purpose, a silicon nitride membrane-based sensor is fabricated to measure the in-plane thermal conductivity of thin film (conductive or nonconductive) samples. Operating with the 3ω-Völklein method at low frequencies, the sensor shows an exceptional resolution down to Δ(κt)=0.065W/mKnm, enabling accurate measurements even in poor conductive samples. Validation of the sensor performance is done by growth characterization of organic and metallic thin films to tackle the low to high thermal-conductivity range. In both cases, at early stages of growth, the extreme sensitivity of the technique has revealed an initial reduction of the effective thermal conductance of the supporting amorphous membrane, K, related to the surface phonon scattering enhanced by the incipient nanoclusters formation. As cluster coalescence advances, K reaches a minimum to rise up upon the percolation threshold. Subsequent island percolation produces a sharp increase of the conductance and once the surface coverage is completed K increases linearly with thickness. The thermal conductivity of the deposited films is also obtained from the slope of K with thickness.