Skip to main content

TRANSPORTE FONONICO EN NANOARQUITECTURAS ANISOTROPICAS PARA EL DESARROLLO DE DISPOSITIVOS EN APLICACIONES DE EFICIENCIA ENERGETICA

MAT2016-79579-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nucleation and growth of the supercooled liquid phase control glass transition in bulk ultrastable glasses

  • Vila Costa, Ana|||0000-0001-9851-877X
  • Ràfols Ribé, Joan|||0000-0003-1256-149X
  • Gonzalez-Silveira, Marta|||0000-0003-1510-5262
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Abad, Llibertat|||0000-0003-2637-8629
  • Rodríguez-Viejo, Javier|||0000-0002-9735-263X
We report the anomalous bulk transformation of vapor deposited stable glasses into the liquid state. The transformation proceeds through two competing parallel processes: partial rejuvenation of the stable glass and nucleation and growth of liquid patches within the glass. The kinetics of the transformation extracted from heat capacity curves after isothermal runs is dominated by the heterogeneous nucleation and growth process that initiates at preexisting seeds and propagates radially at a velocity proportional to the alpha relaxation time. Remarkably, the distance between the activation seeds is independent of temperature within experimental uncertainty and amounts to several micrometers, a value in close agreement with the crossover length for TPD glasses. We speculate the initiation sites for the transformation of the glass into the supercooled liquid are localized regions of lower stability (or density).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermoelectric photosensor based on ultrathin single-crystalline Si films

  • Gonçalves Dalkiranis Pereira, Gustavo
  • Ferrando-Villalba, Pablo|||0000-0002-0858-531X
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Abad, Llibertat|||0000-0003-2637-8629
  • Rodríguez-Viejo, Javier|||0000-0002-9735-263X
Ultrathin Si films have a reduced thermal conductivity in comparison to Si bulk due to phonon scattering at the surfaces. Furthermore, the small thickness guarantees a reduced thermal mass (in the µJ/K range), which opens up the possibility of developing thermal sensors with a high sensitivity. Based on these premises, a thermoelectric (TE) microsensor based on ultrathin suspended Si films was developed and used as a thermal photosensor. The photoresponse of the device was evaluated with an argon laser (λ = 457 nm) with a variable power ranging from 0 to 10 mW in air at atmospheric pressure, with laser diodes at 406 nm, 520 nm and 638 nm wavelengths, and fixed powers in high vacuum conditions. The responsivity per unit area, response time (τ) and detectivity (D*) of the device were determined in air at ambient pressure, being 2.6 × 10⁷ V/Wm², ~4.3 ms and 2.86 × 10 7 c m H z (1 / 2) W - 1, respectively. Temperature differences up to 30 K between the central hot region and the Si frame were achieved during open-circuit voltage measurements, with and without laser diodes. During illumination, the photogeneration of carriers caused a slight reduction of the Seebeck coefficient, which did not significantly change the sensitivity of the device. Moreover, the measurements performed with light beam chopped at different frequencies evidenced the quick response of the device. The temperature gradients applied to the thermoelectric Si legs were corrected using finite element modeling (FEM) due to the non-flat temperature profile generated during the experiments.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Measuring device and material ZT in a thin-film Si-based thermoelectric microgenerator

  • Ferrando-Villalba, Pablo|||0000-0002-0858-531X
  • Pérez-Marín, Antonio Pablo|||0000-0003-1843-8273
  • Abad, Llibertat|||0000-0003-2637-8629
  • Gonçalves Dalkiranis Pereira, Gustavo
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Garcia, Gemma|||0000-0003-3660-5928
  • Rodríguez-Viejo, Javier|||0000-0002-9735-263X
Thermoelectricity (TE) is proving to be a promising way to harvest energy for small applications and to produce a new range of thermal sensors. Recently, several thermoelectric generators (TEGs) based on nanomaterials have been developed, outperforming the efficiencies of many previous bulk generators. Here, we presented the thermoelectric characterization at different temperatures (from 50 to 350 K) of the Si thin-film based on Phosphorous (n) and Boron (p) doped thermocouples that conform to a planar micro TEG. The thermocouples were defined through selective doping by ion implantation, using boron and phosphorous, on a 100 nm thin Si film. The thermal conductivity, the Seebeck coefficient, and the electrical resistivity of each Si thermocouple was experimentally determined using the in-built heater/sensor probes and the resulting values were refined with the aid of finite element modeling (FEM). The results showed a thermoelectric figure of merit for the Si thin films of = 0.0093, at room temperature, which was about 12% higher than the bulk Si. In addition, we tested the thermoelectric performance of the TEG by measuring its own figure of merit, yielding a result of ZT = 0.0046 at room temperature.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Growth Monitoring with Submonolayer Sensitivity Via Real-Time Thermal-Conductance Measurements

  • Ferrando-Villalba, Pablo|||0000-0002-0858-531X
  • Takegami, Daisuke|||0000-0003-3832-1849
  • Abad, Llibertat|||0000-0003-2637-8629
  • Ràfols Ribé, Joan|||0000-0003-1256-149X
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Garcia, Gemma|||0000-0003-3660-5928
  • Rodríguez-Viejo, Javier|||0000-0002-9735-263X
Growth monitoring during the early stages of vapor deposition is of prime importance to understand the growth process, the microstructure, and thus the overall layer properties. We demonstrate that phonons can be used as an extremely sensitive probe to monitor the real-time evolution of film microstructure during growth, from incipient clustering to continuous film formation. For that purpose, a silicon nitride membrane-based sensor is fabricated to measure the in-plane thermal conductivity of thin film (conductive or nonconductive) samples. Operating with the 3ω-Völklein method at low frequencies, the sensor shows an exceptional resolution down to Δ(κt)=0.065W/mKnm, enabling accurate measurements even in poor conductive samples. Validation of the sensor performance is done by growth characterization of organic and metallic thin films to tackle the low to high thermal-conductivity range. In both cases, at early stages of growth, the extreme sensitivity of the technique has revealed an initial reduction of the effective thermal conductance of the supporting amorphous membrane, K, related to the surface phonon scattering enhanced by the incipient nanoclusters formation. As cluster coalescence advances, K reaches a minimum to rise up upon the percolation threshold. Subsequent island percolation produces a sharp increase of the conductance and once the surface coverage is completed K increases linearly with thickness. The thermal conductivity of the deposited films is also obtained from the slope of K with thickness.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

High-performance organic light-emitting diodes comprising ultrastable glass layers

  • Ràfols Ribé, Joan|||0000-0003-1256-149X
  • Will, Paul-Anton|||0000-0001-6753-7660
  • Hänisch, Christian|||0000-0003-1331-9507
  • Gonzalez-Silveira, Marta|||0000-0003-1510-5262
  • Lenk, Simone|||0000-0002-4539-8193
  • Rodríguez-Viejo, Javier|||0000-0002-9735-263X
  • Reineke, Sebastian|||0000-0002-4112-6991
Organic light-emitting diodes with ultrastable glass emission layers show increased efficiency and device stability. Organic light-emitting diodes (OLEDs) are one of the key solid-state light sources for various applications including small and large displays, automotive lighting, solid-state lighting, and signage. For any given commercial application, OLEDs need to perform at their best, which is judged by their device efficiency and operational stability. We present OLEDs that comprise functional layers fabricated as ultrastable glasses, which represent the thermodynamically most favorable and, thus, stable molecular conformation achievable nowadays in disordered solids. For both external quantum efficiencies and LT lifetimes, OLEDs with four different phosphorescent emitters show.