Skip to main content

-

CSD2010-00044

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación CONSOLIDER
Call CONSOLIDER
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA

-

CSD2010-00044

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación CONSOLIDER
Call CONSOLIDER
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT DE VALÈNCIA

-

CSD2010-00044

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación CONSOLIDER
Call CONSOLIDER
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

-

CSD2010-00044

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación CONSOLIDER
Call CONSOLIDER
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

-

CSD2010-00044

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación CONSOLIDER
Call CONSOLIDER
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

-

CSD2010-00044

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación CONSOLIDER
Call CONSOLIDER
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

-

CSD2010-00044

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación CONSOLIDER
Call CONSOLIDER
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

-

CSD2010-00044

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación CONSOLIDER
Call CONSOLIDER
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre ACONDICIONAMIENTO TARRASENSE - LEITAT

-

CSD2010-00044

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación CONSOLIDER
Call CONSOLIDER
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Collective thermal transport in pure and alloy semiconductors

  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Mohammed, Amr
  • Torello Massana, Alvar|||0000-0002-4173-2529
  • Bafaluy, Javier|||0000-0003-1972-9339
  • Camacho, Juan|||0000-0002-8095-4167
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Shakouri, Ali
  • Alvarez, F. Xavier|||0000-0001-6746-2144
Conventional models for predicting thermal conductivity of alloys usually assume a pure kinetic regime as alloy scattering dominates normal processes. However, some discrepancies between these models and experiments at very small alloy concentrations have been reported. In this work, we use the full first principles kinetic collective model (KCM) to calculate the thermal conductivity of Si1-xGex and InxGa1-xAs alloys. The calculated thermal conductivities match well with the experimental data for all alloy concentrations. The model shows that the collective contribution must be taken into account at very low impurity concentrations. For higher concentrations, the collective contribution is suppressed, but normal collisions have the effect of significantly reducing the kinetic contribution. The study thus shows the importance of the proper inclusion of normal processes even for alloys for accurate modeling of thermal transport. Furthermore, the phonon spectral distribution of the thermal conductivity is studied in the framework of KCM, providing insights to interpret the superdiffusive regime introduced in the truncated Lévy flight framework.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Emergence of hydrodynamic heat transport in semiconductors at the nanoscale

  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Ziabari, Amir Koushyar|||0000-0003-4776-457X
  • Torello Massana, Alvar|||0000-0002-4173-2529
  • Bafaluy, Javier|||0000-0003-1972-9339
  • Camacho, Juan|||0000-0002-8095-4167
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Shakouri, Ali
  • Alvarez, F. Xavier|||0000-0001-6746-2144
Several recent experiments have demonstrated the failure of the Fourier heat equation in semiconductors at the nanoscale. We show that a generalized heat transport equation including a hydrodynamic term can explain three of these experiments on a silicon substrate: heater lines experiments both in stationary and nonstationary settings and the nonstationary response in grating experiments. To this end, we solve the hydrodynamic heat equation either numerically or analytically. The non-Fourier response observed in those experimental situations can be easily explained in terms of hydrodynamic concepts, such as friction and vorticity. For instance, the experimentally observed increase of thermal boundary resistance as size decreases can be simply understood as an increase of friction. We conclude that, contrary to common belief, hydrodynamics is a fundamental ingredient of semiconductor heat transport in the nanoscale at room temperature, providing physical insight and a unifying framework on the observed non-Fourier response. The relations between hydrodynamic heat transport with phonon momentum conservation and the Boltzmann transport equation are also provided.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

First principles kinetic-collective thermal conductivity of semiconductors

  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Torello Massana, Alvar|||0000-0002-4173-2529
  • Bafaluy, Javier|||0000-0003-1972-9339
  • Camacho, Juan|||0000-0002-8095-4167
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Alvarez, F. Xavier|||0000-0001-6746-2144
A fully predictive kinetic-collective model using first principles phonon spectra and relaxation times is presented. Thermal conductivity values obtained for Si, Ge, C (diamond), and GaAs in a wide range of sizes and temperatures are in good agreement with experimental data without the use of any fitting parameter. These results open the door to discuss how the precise combination of kinetic and collective contributions to heat transport could provide a useful framework to interpret recent complex experiments displaying non-Fourier behavior.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hydrodynamic heat transport in compact and holey silicon thin films

  • Beardo, Albert|||0000-0003-1889-1588
  • Calvo Schwarzwälder, Marc|||0000-0003-4284-1898
  • Camacho, Juan|||0000-0002-8095-4167
  • Myers, T. G.|||0000-0001-7573-8059
  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Sendra Molins, Lluc|||0000-0001-8821-6831
  • Alvarez, F. Xavier|||0000-0001-6746-2144
  • Bafaluy, Javier|||0000-0003-1972-9339
A multiscale hydrodynamic-heat-transport model applicable to arbitrary geometries using finite-element methods is compared with the experimental effective thermal conductivity of silicon thin films and periodic holey membranes for different sizes and temperatures. The range of system length scales and temperatures in which the model predictions agree with experimental data is discussed and quantitatively determined. The model agrees with experimental results when the smallest system size is larger than twice the nonlocal length, an intrinsic property of the material that depends only on temperature. These results open the door to the use of the hydrodynamic equation instead of an effective Fourier model to interpret current heat-transport experimental data.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Conducting PEDOT Nanoparticles: Controlling Colloidal Stability and Electrical Properties

  • Culebras,M.
  • Serrano-Claumarchirant, José F.
  • Landfester, Katharina
  • Cantarero, A.
  • Gomez- Clari, Clara Maria
  • Muñoz-Espí, Rafael
  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
[EN] The synthesis of conducting polymer nano particles by oxidative polymerization can be a challenge because the addition of oxidizers may compromise the colloidal stability of the system. In this work, we report the successful synthesis of poly(3,4-ethylenedioxythiophene) (PEDOT) nanoparticles by means of miniemulsion polymerization. We study the role of oxidizing agents (iron(III) p-toluenesulfonate and hydrogen peroxide) during the particle formation and in the electric properties. The presence of hydrogen peroxide is demonstrated to be crucial in the macroscopic stability of the suspensions and in the morphology of the resulting nanoparticles. The obtained suspensions, containing particles of diameters of around 30 nm, are stable for several months. The electrical conductivity increases with increasing the content of iron(III) p-toluenesulfonate, but it decreases with addition of hydrogen peroxide, which can be explained by secondary reactions in the polymerization process., The authors acknowledge the financial support from the Direction General de Investigation Cientifica y Tecnica through a grant of the Program Consolider Ingenio (Grant CSD2010-0044) and Grant MAT2015-63955-R. The authors also thank the Max Planck Society through the funding of the Max Planck Partner Group on Colloidal Methods for Multifunctional Materials (CM3) at the University of Valencia, headed by R.M.E. M.C. acknowledges the financial support by the Spanish Ministry of Education, Culture and Sport through the FPU training program and the German Academic Exchange Service (DAAD) for a short-term research scholarship at the Max Planck Institute for Polymer Research. Finally, R.M.E. thanks the financial support from the Spanish Ministry of Economy and Competitiveness through a Ramon y Cajal grant (Grant RYC-2013-13451).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An experimental study of dynamic behaviour of graphite polycarbonatediol polyurethane composites for protective coatings

  • Gómez, C.M.
  • Culebras, M.
  • Cantarero Saez, Andres
  • Redondo Foj, María Belén
  • Ortiz Serna, María Pilar
  • Carsí Rosique, Marta|||0000-0003-2315-3344
  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
Segmented polycarbonatediol polyurethane (PUPH) has been synthesized and modified with different amounts of graphite conductive filler (from 0 to 50 wt%). Thermal and dynamical thermal analysis of the composites clearly indicates changes in the polyurethane relaxations upon addition of graphite. Broadband dielectric spectroscopy has been used to study the dielectric properties of the (PUPH) and one composite in the frequency range from 10−2 to 107 Hz and in the temperature window of −140 to 170 ◦C. Relaxation processes associated with different molecular motions and conductivity phenomena (Maxwell–Wagner–Sillars and electrode polarization) are discussed and related to the graphite content, We acknowledge the financial support of the Ministry of Finances and Competitiveness through the Grant CDS2010-0044 belonging to the "Consolider-Ingenio Programme" and for the Grant MAT2012-33483. The authors thank UBE Chem Eur for the PCD supply for this work.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-plane thermal conductivity of sub-20 nm thick suspended mono-crystalline Si layers

  • Ferrando-Villalba, P
  • Lopeandia, A F
  • Abad, Llibertat
  • Llobet, Jordi
  • Molina-Ruiz, M
  • Garcia, G
  • Gerbolès, Marta
  • Alvarez, F X
  • Goñi, A R
  • Muñoz-Pascual, Francisco Javier
  • Rodríguez-Viejo, J
We measure the thermal conductivity of a 17.5-nm-thick single crystalline Si layer by using a suspended structure developed from a silicon-on-insulator wafer, in which the Si layer bridges the suspended platforms. The obtained value of 19 Wm(-1) K(-1) at room temperature represents a tenfold reduction with respect to bulk Si. This design paves the way for subsequent lateral nanostructuration of the layer with lithographic techniques, to define different geometries such as Si nanowires, nanostrips or phononic grids. As a proof of concept, nanostrips of 0.5 × 10 μm have been defined by focused ion beam (FIB) in the ultrathin Si layer. After the FIB cutting process with Ga ions at 30 kV and 100 pA, the measured thermal conductivity dramatically decreased to 1.7 Wm(-1) K(-1), indicating that the structure became severely damaged (amorphous). Re-crystallization of the structure was promoted by laser annealing while monitoring the Raman spectra. The thermal conductivity of the layer increased again to a value of 9.5 Wm(-1) K(-1) at room temperature, below that of the single crystalline material due to phonon scattering at the grain boundaries., We acknowledge financial support from Generalitat de Cat- alunya through Grant SGR2009-01225, the Ministerio de Economía y Competitividad through Grants CSD2010-00044 (Consolider NANOTHERM) and MAT2010-15202, and from Marie Curie European Reintegration Grant within the 7th European Community Framework Programme. The inte- grated micro-nano-fabrication clean room access was pro- vided within the GICSERV programme. P. Ferrando-Villalba was in receipt of an FPU grant from the Spanish Ministry of Education, Culture and Sports. Ll. Abad acknowledges CSIC for her JAE-DOC postdoctoral contract partially funded by ESF. The authors acknowledge the Servei de Microscòpia from the Universitat Autònoma de Barcelona for the micro- scopy images., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Localized thinning for strain concentration in suspended germanium membranes and optical method for precise thickness measurement

  • Vaccaro, Pablo Oscar
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Garriga, Miquel|||0000-0002-6683-0790
  • Gutiérrez, Joffre
  • Peró, Damià
  • Wagner, Markus R.|||0000-0002-7367-5629
  • Reparaz, Juan Sebastián|||0000-0001-9679-0075
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Vidal, Xavier|||0000-0001-8026-2016
  • Carter, E. A.
  • Lay, P. A.
  • Yoshimoto, M.
  • Goñi, Alejandro|||0000-0002-1193-3063
We deposited Ge layers on (001) Si substrates by molecular beam epitaxy and used them to fabricate suspended membranes with high uniaxial tensile strain. We demonstrate a CMOS-compatible fabrication strategy to increase strain concentration and to eliminate the Ge buffer layer near the Ge/Si hetero-interface deposited at low temperature. This is achieved by a two-steps patterning and selective etching process. First, a bridge and neck shape is patterned in the Ge membrane, then the neck is thinned from both top and bottom sides. Uniaxial tensile strain values higher than 3% were measured by Raman scattering in a Ge membrane of 76 nm thickness. For the challenging thickness measurement on micrometer-size membranes suspended far away from the substrate a characterization method based on pump-and-probe reflectivity measurements was applied, using an asynchronous optical sampling technique.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal transport in suspended silicon membranes measured by laser-induced transient gratings

  • Vega-Flick, Alejandro|||0000-0001-9496-0261
  • Duncan, Ryan A.|||0000-0003-2831-8099
  • Eliason, Jeffrey Kristian
  • Cuffe, John|||0000-0003-2915-5383
  • Johnson, Jeremiah A.|||0000-0001-5302-3247
  • Peraud, Jean-Philippe M.
  • Zeng, Lingping|||0000-0001-8051-5378
  • Lu, Zhengmao
  • Maznev, Alex A.
  • Wang, Evelyn N.
  • Alvarado Gil, Juan José
  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Chen, Gang
  • Nelson, Keith A.
Studying thermal transport at the nanoscale poses formidable experimental challenges due both to the physics of the measurement process and to the issues of accuracy and reproducibility. The laser-induced transient thermal grating (TTG) technique permits non-contact measurements on nanostructured samples without a need for metal heaters or any other extraneous structures, offering the advantage of inherently high absolute accuracy. We present a review of recent studies of thermal transport in nanoscale silicon membranes using the TTG technique. An overview of the methodology, including an analysis of measurements errors, is followed by a discussion of new findings obtained from measurements on both "solid" and nanopatterned membranes. The most important results have been a direct observation of non-diffusive phonon-mediated transport at room temperature and measurements of thickness-dependent thermal conductivity of suspended membranes across a wide thickness range, showing good agreement with first-principles-based theory assuming diffuse scattering at the boundaries. Measurements on a membrane with a periodic pattern of nanosized holes (135nm) indicated fully diffusive transport and yielded thermal diffusivity values in agreement with Monte Carlo simulations. Based on the results obtained to-date, we conclude that room-temperature thermal transport in membrane-based silicon nanostructures is now reasonably well understood.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Raman thermometry analysis, Modelling assumptions revisited

  • Jaramillo Fernández, Juliana|||0000-0002-4787-3904
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
In Raman thermometry, several assumptions are made to model the heat conduction and to extract the thermal conductivity of the samples from the measured data. In this work, the heat conduction in bulk and mesa-like samples was investigated by numerical simulation and measured by the temperature-induced Raman shift method, to study the range of applicability of these assumptions. The effects of light penetration depth and finite sample size on the accuracy of the thermal conductivity determination were investigated by comparing the results of the finite element method with the usual analytical approximation for bulk samples. We found that the assumptions used in the analytical model can be applied to extract the thermal conductivity in solids if the following conditions are fulfilled: the ratio of light penetration depth to laser spot radius is smaller than 0.5, the ratio of spot radius to sample thickness is smaller than 0.1, and the ratio of spot radius to sample half width is smaller than 0.01.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Measuring device and material ZT in a thin-film Si-based thermoelectric microgenerator

  • Ferrando-Villalba, Pablo|||0000-0002-0858-531X
  • Pérez-Marín, Antonio Pablo|||0000-0003-1843-8273
  • Abad, Llibertat|||0000-0003-2637-8629
  • Gonçalves Dalkiranis Pereira, Gustavo
  • Lopeandia, Aitor|||0000-0003-0566-8299
  • Garcia, Gemma|||0000-0003-3660-5928
  • Rodríguez-Viejo, Javier|||0000-0002-9735-263X
Thermoelectricity (TE) is proving to be a promising way to harvest energy for small applications and to produce a new range of thermal sensors. Recently, several thermoelectric generators (TEGs) based on nanomaterials have been developed, outperforming the efficiencies of many previous bulk generators. Here, we presented the thermoelectric characterization at different temperatures (from 50 to 350 K) of the Si thin-film based on Phosphorous (n) and Boron (p) doped thermocouples that conform to a planar micro TEG. The thermocouples were defined through selective doping by ion implantation, using boron and phosphorous, on a 100 nm thin Si film. The thermal conductivity, the Seebeck coefficient, and the electrical resistivity of each Si thermocouple was experimentally determined using the in-built heater/sensor probes and the resulting values were refined with the aid of finite element modeling (FEM). The results showed a thermoelectric figure of merit for the Si thin films of = 0.0093, at room temperature, which was about 12% higher than the bulk Si. In addition, we tested the thermoelectric performance of the TEG by measuring its own figure of merit, yielding a result of ZT = 0.0046 at room temperature.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Inductively coupled remote plasma-enhanced chemical vapor deposition (rPE-CVD) as a versatile route for the deposition of graphene micro- and nanostructures

  • González Cuxart, Marc|||0000-0002-9085-1225
  • Šics, Igors
  • Goñi, Alejandro|||0000-0002-1193-3063
  • Pach, Elzbieta|||0000-0001-9587-3768
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Paradinas, Markos|||0000-0003-1006-9506
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Moreno Fernández, Harol Aníbal|||0000-0002-4362-9488
  • Carlino, Vincent
  • Pellegrin, Eric|||0000-0002-1648-0331
Multiple layers of graphene thin films with micro-crystalline orientation and vertical graphene nano-sheets were grown on different substrates (i.e., polycrystalline nickel foil, Ni(111), highly oriented pyrolytic graphite) using a single-step process based on low-pressure remote Plasma-Enhanced Chemical Vapor Deposition (rPE-CVD). In contrast to previous studies, a novel basic approach to this technique including a new remote inductively coupled RF plasma source has been used to (i) minimize the orientational effect of the plasma electrical fields during the catalyst-free growth of graphene nano-sheets, (ii) warrant for a low graphene defect density via low plasma kinetics, (iii) decouple the dissociation process of the gas from the growth process of graphene on the substrate, (iv) tune the feedstock gas chemistry in view of improving the graphene growth, and (v) reduce the growth temperature as compared to conventional chemical vapor deposition (CVD). In order to study the various aspects of the rPE-CVD graphene growth modes and to assess the characteristics of the resulting graphene layers, Raman spectroscopy, XPS, SEM, and STM were used. The results give evidence for the successful performance of this new rPE-CVD plasma deposition source, that can be combined with in situ UHV-based processess for the production of, e. g., hybrid metal ferromagnet/graphene systems.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal conductivity of epitaxially grown InP, experiment and simulation

  • Jaramillo Fernández, Juliana|||0000-0002-4787-3904
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Sanatinia, Reza
  • Kataria, Himanshu
  • Anand, Srinivasan|||0000-0003-4991-0585
  • Lourdudoss, Sebastian|||0000-0002-0977-2598
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
The integration of III-V optoelectronic devices on silicon is confronted with the challenge of heat dissipation for reliable and stable operation. A thorough understanding and characterization of thermal transport is paramount for improved designs of, for example, viable III-V light sources on silicon. In this work, the thermal conductivity of heteroepitaxial laterally overgrown InP layers on silicon is experimentally investigated using microRaman thermometry. By examining InP mesa-like structures grown from trenches defined by a SiO mask, we found that the thermal conductivity decreases by about one third, compared to the bulk thermal conductivity of InP, with decreasing width from 400 to 250 nm. The high thermal conductivity of InP grown from 400 nm trenches was attributed to the lower defect density as the InP microcrystal becomes thicker. In this case, the thermal transport is dominated by phonon-phonon interactions as in a low defect-density monocrystalline bulk material, whereas for thinner InP layers grown from narrower trenches, the heat transfer is dominated by phonon scattering at the extended defects and InP/SiO interface. In addition to the nominally undoped sample, sulfur-doped (1 × 10 cm) InP grown on Si was also studied. For the narrower doped InP microcrystals, the thermal conductivity decreased by a factor of two compared to the bulk value. Sources of errors in the thermal conductivity measurements are discussed. The experimental temperature rise was successfully simulated by the heat diffusion equation using the FEM.