Skip to main content

NANOESTRUCTURAS SEMICONDUCTORAS Y NANOCOMPOSITES PARA LA RECUPERACION ENERGETICA

MAT2015-63955-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSITAT DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Controlling dielectrical properties of polymer blends through defined PEDOT nanostructures

  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
  • Carsí Rosique, Marta|||0000-0003-2315-3344
  • Redondo Foj, María Belén
  • Ortiz Serna, Mª Pilar
  • Culebras, Mario
  • Gomez, Clara M.
  • Cantarero, Andres
  • Munoz-Espi, Rafael
[EN] The paper reports the crucial role of the morphology of poly(3,4-ethylenedioxythiophene) (PEDOT) nanostructures on the thermal and dielectric properties of polymer blends prepared thereof. PEDOT nanostructures with two different morphologies (nanoparticles and nanowires) were synthesized. The size for the nanoparticles was in the range 10 40 nm and the diameter of the nanowires was of ca. 200 nm. These nanostructures were blended with an insulating polymer matrix, poly(methyl methacrylate) (PMMA), to evaluate the dielectrical properties of the materials. The results of broadband dielèctric spectroscopy showed a strong correlation between the morphology of the nanostructure and the improvement of the electrical properties of the material., The authors acknowledge the financial support of the DGCYT through Grant MAT2015-63955-R. R. M. E. also acknowledges the financial support from the Spanish Ministry of Economy and Competitiveness through a Ramon y Cajal grant (grant No. RYC-2013-13451) and M. C. acknowledges the FPU program of the Spanish Ministry of Culture, Education and Sports.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Understanding the thermal and dielectric response of organosolv and modified kraft lignin as a carbon fibre precursor

  • Culebras, Mario
  • Beaucamp, Anne
  • Kandola, Baljinder K.
  • Horrocks, A. Richard
  • Panzetti, Gianmarco
  • Birkinshaw, Colin
  • Collins, Maurice N.
  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
  • Carsí Rosique, Marta|||0000-0003-2315-3344
[EN] Understanding the thermal behaviour of lignin is crucial in order to realise its valorisation as an engineering polymer. Two hardwood lignins, organosolv (OSL) and chemically modified kraft lignin (ML) have been chosen to represent important classes of renewable and abundant raw materials. The relationship between ionic mobility and viscosity in OSL and ML has been studied. The rheological results have been interpreted in terms of the competitive processes of thermal plasticisation and stiffening through crosslinking. Results show that with OSL, crosslinking proceeds relatively rapidly, and this is consistent with its more reactive structure. Higher molecular weight (M-w) influenced the melt stability as cross-linking kinetics was reduced and this was attributed to the reduction of chain ends available for cross-linking reactions. Scanning calorimetry has shown that both materials are glassy and pass through the glass transition between 100 degrees C and 115 degrees C, with the higher molecular weight modified material having a slightly higher T-g. Both lignins show pronounced maxima in the Gram-Schmidt plots for methane or methanol around 400 degrees C. However, a significant difference between the materials is observed with the detection of a strong carbonyl peak in the evolution products of the ML, which is attributed to the scission of the hydroxypropyl substituent present in the ML structure. The differences in the degradation processes are further reflected in the dielectric properties of the partially degraded materials where loss maxima occur at different temperatures and show different degrees of frequency dependence. An important observation is the difference in conductivity, where higher values for OSL are attributed to the cross-linking between adjacent benzene rings, whereas with the ML, a lower conductivity is associated with intrinsically less conductive intermolecular linkages. These results demonstrate that the thermal decomposition of the two lignins follows significantly different paths at the molecular level. With the more reactive OSL, it appears to be the case that there is a greater tendency to form direct ring to ring crosslinks and this is very significant for the properties of the intended end product., Mario Culebras, Anne Beaucamp, Baljinder K. Kandola, A. Richard Horrocks, Gianmarco Panzetti and Maurice N Collins acknowledge the funding received from the BioBased Industries Joint Undertaking under the European Union's Horizon 2020 research and innovation programme grant agreement no. 720707. MC and MJS are thankful to the Spanish Ministerio de Economia y Competitividad (MAT2015-63955-R) for the partial financial help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Monitoring molecular dynamics of bacterial cellulose composites reinforced with graphene oxide by carboxymethyl cellulose addition

  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
  • Carsí Rosique, Marta|||0000-0003-2315-3344
  • Gomez, C. M.
  • Culebras, M.
  • Gonzales, K.N.
  • Gisbert Torres, Fernando
[EN] Broadband Dielectric Relaxation Spectroscopy was performed to study the molecular dynamics of dried Bacterial Cellulose/Carboxymethyl Cellulose-Graphene Oxide (BC/CMC-GO) composites as a function of the concentration of CMC in the culture media. At low temperature the dielectric spectra are dominated by a dipolar process labelled as a beta -relaxation, whereas electrode polarization and the contribution of dc-conductivity dominate the spectra at high temperatures and low frequency. The CMC concentration affects the morphological structure of cellulose and subsequently alters its physical properties. X-ray diffractometry measurements show that increasing the concentration of CMC promotes a decrease of the Ia/Ib ratio. This structural change in BC, that involves a variation in inter- and intramolecular interactions (hydrogen-bonding interactions), affects steeply their molecular dynamics. So, an increase of CMC concentration produces a significantly decrease of the -relaxation strength and an increase of the dc-conductivity., This work was supported by the DGCYT [MAT2015-63955-R]; the Vice-Rectorate for Research of the Pontificia Universidad Catolica del Peril and the National Council of Science, Technology and Technological Innovation of Peru (CONCYTEC/FONDECYT).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Conducting PEDOT Nanoparticles: Controlling Colloidal Stability and Electrical Properties

  • Culebras,M.
  • Serrano-Claumarchirant, José F.
  • Landfester, Katharina
  • Cantarero, A.
  • Gomez- Clari, Clara Maria
  • Muñoz-Espí, Rafael
  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
[EN] The synthesis of conducting polymer nano particles by oxidative polymerization can be a challenge because the addition of oxidizers may compromise the colloidal stability of the system. In this work, we report the successful synthesis of poly(3,4-ethylenedioxythiophene) (PEDOT) nanoparticles by means of miniemulsion polymerization. We study the role of oxidizing agents (iron(III) p-toluenesulfonate and hydrogen peroxide) during the particle formation and in the electric properties. The presence of hydrogen peroxide is demonstrated to be crucial in the macroscopic stability of the suspensions and in the morphology of the resulting nanoparticles. The obtained suspensions, containing particles of diameters of around 30 nm, are stable for several months. The electrical conductivity increases with increasing the content of iron(III) p-toluenesulfonate, but it decreases with addition of hydrogen peroxide, which can be explained by secondary reactions in the polymerization process., The authors acknowledge the financial support from the Direction General de Investigation Cientifica y Tecnica through a grant of the Program Consolider Ingenio (Grant CSD2010-0044) and Grant MAT2015-63955-R. The authors also thank the Max Planck Society through the funding of the Max Planck Partner Group on Colloidal Methods for Multifunctional Materials (CM3) at the University of Valencia, headed by R.M.E. M.C. acknowledges the financial support by the Spanish Ministry of Education, Culture and Sport through the FPU training program and the German Academic Exchange Service (DAAD) for a short-term research scholarship at the Max Planck Institute for Polymer Research. Finally, R.M.E. thanks the financial support from the Spanish Ministry of Economy and Competitiveness through a Ramon y Cajal grant (Grant RYC-2013-13451).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Molecular dynamics of carrageenan composites reinforced with Cloisite Na+ montmorillonite nanoclay

  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
  • Carsí Rosique, Marta|||0000-0003-2315-3344
  • Culebras, M.
  • Gomez- Clari, Clara Maria
  • Rodríguez, S.
  • García-Torres. F.
[EN] Nanocomposites comprising biodegradable carrageenan and glycerol(KCg) as the host polymer, with different contents of natural montmorillonite (MMT) as filler, were prepared by a solution casting process. Different techniques have been used to determine the interaction/behavior among the different components of the samples such as Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Transmission electron microscope (TEM) and, mainly, Dielectric relaxation spectroscopy (DRS). FTIR indicates hydrogen interaction between carrageenan matrix and silicate that is confirmed by the XRD data indicating some kind of carrageenan intercalation between the MMT layers. A rather homogenous distribution of MMT into KCg matrix were observed using transmission electron microscopy. The MMT effect on the molecular mobility at the glass transition was studied by dielectric relaxation spectroscopy. The MMT addition resulted in a slower relaxation and a wider distribution ofthe relaxation times. The fragility index, m, increased upon MMT incorporation, which may be attributed to a reduction in mobility chains, due to the MMT confinement of the KCg network. In addition, the apparent activation energy associated with the relaxation dynamics of the chains at Tg increased with the MMT content. The modified films developed in this paper could be used to prepare biodegradable and edible packaging films and films for biomedical applications with improved mechanical and good dielectric response., This work was supported by the Direccion General de Ciencia y Tecnologia (DGCYT) [MAT2015-63955-R]; the Vice-Rectorate for Research of the Pontificia Universidad Catolica del Peru and the National Council of Science, Technology and Technological Innovation of Peru (CONCYTEC/FONDECYT).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermal and Dielectric Characterization of Multi-Walled Carbon NanotubesThermoplastic Polyurethanes Composites

  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
  • Carsí Rosique, Marta|||0000-0003-2315-3344
  • Gracia-Fernandez, C.A.
[EN] Multi-walled carbon nanotubes-thermoplastic polyurethanes composites were characterized by means of differential scanning calorimetry and dielectric relaxation spectroscopy. The composite is characterized by two glass transition temperatures T (g) . The T (g) associated with the soft segment decreases by increasing of carbon nanotubes content, while carbon nanotubes content has practically no effect on the value of the T-g associated with the hard segments. It was observed that rising the temperature and carbon nanotubes content resulted in the increased of both the dielectric permittivity and the loss factor. The presence of carbon nanotubes produces an enhancement of charge carriers trapping, increasing the electrical conductivity. The electrical conductivity of the composite was found to exhibit an insulator to conductor transition at a carbon nanotubes critical content, i.e., the percolation threshold, near 6 wt %., MJS and MC acknowledge the financial support of the DGCYT through Grant MAT2015-63955-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Chitin Whiskers on the Molecular Dynamics of Carrageenan-Based Nanocomposites

  • Carsí Rosique, Marta|||0000-0003-2315-3344
  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
  • García-Torres, Fernando|||0000-0002-5337-8774
  • Gómez, Clara M.
  • Rodriguez, Sol
[EN] Films of carrageenan (KC) and glycerol (g) with different contents of chitin nanowhiskers (CHW) were prepared by a solution casting process. The molecular dynamics of pure carrageenan (KC), carrageenan/glycerol (KCg) and KCg with different quantities of CHWs as a filler was studied using dielectric relaxation spectroscopy. The analysis of the CHW effect on the molecular mobility at the glass transition, T-g, indicates that non-attractive intermolecular interactions between KCg and CHW occur. The fragility index increased upon CHW incorporation, due to a reduction in the polymer chains mobility produced by the CHW confinement of the KCg network. The apparent activation energy associated with the relaxation dynamics of the chains at T-g slightly increased with the CHW content. The filler nature effect, CHW or montmorillonite (MMT), on the dynamic mobility of the composites was analyzed by comparing the dynamic behavior of both carrageenan-based composites (KCg/xCHW, KCg/xMMT)., This research was funded by the DGCYT grant number [MAT2015-63955-R] and the Vice-Rectorate for Research of the Pontificia Universidad Catolica del Peru and the the Peruvian Science and Technology Program (INNOVATE-PERU) And The APC was funded by MDPI.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Renewable polyol obtained by microwave-assisted alcoholysis of epoxidized soybean oil: Preparation, thermal properties and relaxation process

  • Favero, Diana
  • Marcon, Victória R.R.
  • Barcellos, Thiago
  • Gomez-Clari, Clara Maria
  • Figueroa, Carlos A.
  • Bianchi, Otavio
  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
  • Carsí Rosique, Marta|||0000-0003-2315-3344
[EN] The soybean oil polyol (SOP) use as feedstock in the polyurethane industry has been recently emphasized due to its excellent resistance to hydrolysis, which is also applicable in coatings and thermal insulation. In this article, the SOP was obtained by a very fast microwave-assisted alcoholysis of epoxidized soybean oil (ESO). The preparation method, thermal properties, and relaxation process were evaluated. High yields as opening and consumption epoxy group and selectivity of 99.8 mol%, 985 mol%, and 71.2 mol% were obtained. Through titrations, nuclear magnetic resonance and gel permeation chromatography were identified parameters as 0.32 mg KOH.g(-1) acid number, 190 mg KOH.g(-1) hydroxyl number, 150 mg KOH.g(-1) saponification index, 0.17 wt% water content, 1463 g.mol(-1) molecular weight, 4.98 average functionality, 2.4 x 10(-5) mPa.s(-1) viscosity at 333 K and 1.00 g.cm(-3) density. The dielectric relaxation spectroscopy allowed identifying the alpha-relaxation process with a 193.5 K glass transition (T-g), 63.2 fragility index and 234.1 kJ mol(-1) activation energy associated with T-g from the dynamic fragility index. The ionic conductivity temperature dependence on SOP obeys Arrhenius behavior. In summary, the SOP structure and thermal relaxation parameters determination are fundamental for the understanding of the structure-properties relationship of renewable polyurethanes. (C) 2019 Published by Elsevier B.V., The authors thank the financial support from the Brazilian Agency Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES) and Sindicato das Industrias de Material Plastic do Nordeste Gaucho (SIMPLAS) for the gratification received at Jovens Pesquisadores 2017, da University of Caxias do Sul (UCS). CAF and OB are National Council for Scientific and Technological Development (CNPq) fellows. CMG and MJS thank the Spanish Ministerio de Economia y Competitividad (MAT2015-63955-R) for partial financial help. The authors also thank Dr. Cesar H. Wanke for the suggestions. This work was supported by CNPq-Brazil (06086/2018-2).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical Synthesis of an Organic Thermoelectric Power Generator

  • Serrano-Claumarchirant. José F.
  • Brotons-Alcázar, Isaac
  • Culebras, M.
  • Cantarero, A.
  • Muñoz-Espí, Rafael
  • Gomez, C.M.
  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
[EN] Energy harvesting through residual heat is considered one of the most promising ways to power wearable devices. In this work, thermoelectric textiles were prepared by coating the fabrics, first with multiple-wall carbon nanotubes (MWCNTs) by using the layer-by-layer technique and second with poly(3,4-ethylenedioxythiophene) (PEDOT) deposited by electrochemical polymerization. Sodium deoxycholate and poly(diallyldimethylammonium chloride) were used as stabilizers to prepare the aqueous dispersions of MWCNTs. The electrochemical deposition of PEDOT on the MWCNT-coated fabric was carried out in a three-electrode electrochemical cell. The polymerization of PEDOT on the fabric increased the electrical conductivity by ten orders of magnitude (through the plane), establishing an excellent path for electric transport across the fabrics. In addition, the fibers showed a Seebeck coefficient of 14.3 ¿V K¿1, which is characteristic of highly doped PEDOT. As a proof of concept, several thermoelectric modules were made with different elements based on the coated acrylic and cotton fabrics. The best generator made of 30 thermoelectric elements using acrylic fabrics exhibited an output power of 0.9 ¿W with a temperature difference of 31 K., This research was supported by the General Direction of Scientific and Technical Research of the Spanish Government through a grant of the Program Consolider Ingenio (grant no. CSD2010-0044) and grant MAT2015-63955-R. J.F.S.-C. and I.B.-A. acknowledge the financial support by the Spanish Ministry of Education, Culture and Sport through the FPU Training Program. Finally, R.M.-E. thanks the financial support of the Spanish Ministry of Science and Innovation through a Ramon y Cajal grant (grant no. RYC-2013-13451).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Molecular Dynamics of Functional Azide-Containing Acrylic Films

  • Carsí Rosique, Marta|||0000-0003-2315-3344
  • Sanchis Sánchez, María Jesús|||0000-0002-3528-3966
  • Vallejos, Saúl
  • García, Félix C.
  • García, José Miguel
[EN] A report on the syntheses, thermal, mechanical and dielectric characterizations of two novel polymeric acrylic materials with azide groups in their pendant structures is presented. Having the same general structure, these polymers differ in length of oxyethylene units in the pendant chain [-CONH-CH2CH2-(O-CH2CH2)(n)N-3], where n is 1 (poly(N-(2-(2-azidoethoxy)ethyl)methacrylamide), PAzMa1) or 2 (poly(N-2-(2-(2-azidoethoxy)ethoxy)ethyl)methacrylamide), PAzMa2), leading with changes in their dynamics. As the thermal decomposition of the azide group is observed above 100 degrees C, dielectric analysis was carried out in the temperature range of -120 degrees C to 100 degrees C. Dielectric spectra of both polymers exhibit in the glassy state two relaxations labelled in increasing order of temperature as gamma- and beta-processes, respectively. At high temperatures and low frequencies, the spectra are dominated by ohmic conductivity and interfacial polarization effects. Both, dipolar and conductive processes were characterized by using different models. Comparison of the dielectric activity obtained for PAzMa1 and PAzMa2 with those reported for crosslinked poly(2-ethoxyethylmethacrylate)(CEOEMA) was performed. The analysis of the length of oxyethylene pendant chain and the effect of the methacrylate or methacrylamide nature on the dynamic mobility was analysed., The financial support provided by Fondo Europeo de Desarrollo Regional (FEDER) and the Spanish Agencia Estatal de Investigación (AEI) (MAT2015-63955-R and MAT2017-84501-R) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanowires: A route to efficient thermoelectric devices

  • Domínguez-Adame, Francisco
  • Martín-González, Marisol
  • Sánchez, David
  • Cantarero, Andrés
Miniaturization of electronic devices aims at manufacturing ever smaller products, from mesoscopic to nanoscopic sizes. This trend is challenging because the increased levels of dissipated power demands a better understanding of heat transport in small volumes. A significant amount of the consumed energy in electronics is transformed into heat and dissipated to the environment. Thermoelectric materials offer the possibility to harness dissipated energy and make devices less energy-demanding. Heat-to-electricity conversion requires materials with a strongly suppressed thermal conductivity but still high electronic conduction. Nanowires can meet nicely these two requirements because enhanced phonon scattering at the surface and defects reduces the lattice thermal conductivity while electric conductivity is not deteriorated, leading to an overall remarkable thermoelectric efficiency. Therefore, nanowires are regarded as a promising route to achieving valuable thermoelectric materials at the nanoscale. In this paper, we present an overview of key experimental and theoretical results concerning the thermoelectric properties of nanowires. The focus of this review is put on the physical mechanisms by which the efficiency of nanowires can be improved. Phonon scattering at surfaces and interfaces, enhancement of the power factor by quantum effects and topological protection of electron states to prevent the degradation of electrical conductivity in nanowires are thoroughly discussed., This work was supported by the Spanish MICINN under grants MAT2015-63955-R, MAT2016-75955, MAT2016-82015-REDT, MAT2017-82639 and MAT2017-86450-C4-3-R., No