Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoarchitecture effects on persistent room temperature photoconductivity and thermal conductivity in ceramic semiconductors: Mesoporous, yolk-shell, and hollow ZnO spheres

  • Dilger, Stefan
  • Wagner, M. R.
  • Reparaz, J. S.
  • Sotomayor Torres, C. M.
  • Polarz, Sebastian
Whereas size effects have been investigated extensively and are largely understood, it is significantly more challenging to elucidate how functional properties of semiconductors can be altered and ultimately be improved by a hierarchical nanoarchitecture. For semiconductor applications, such as in photovoltaics or photocatalysis, it is of great importance to learn how to avoid the recombination of photogenerated charge carriers and how to enhance their lifetime. A gas-phase synthesis method is explored, which enables the generation of spherical zinc oxide nanostructures with compact, mesoporous, a special type of core-shell, so-called yolk-shell, or hollow character. The particles with hollow character exhibit an extraordinarily long persistence of photogenerated charge carriers. It is demonstrated that the presence of the ZnO shell and its special orientation with respect to the polar character of the wurtzite lattice represent deciding factors. After photoexcitation, electrons and holes migrate to opposite sides of the interfaces, where they are stabilized. Moreover, photoluminescence thermometry was used to determine the thermal conductivity of the samples, which is lowered by a factor of ~100 compared with bulk ZnO. The thermal conductivity of this type of nanostructure is found to be only 10 times larger than that of air, and this points toward potential applications as thermoelectrics. © 2014 American Chemical Society., SP acknowledges the German Research Foundation (Grant PO 780/8-1) and the Carl-Zeiss Foundation (project Refine) for funding. ICN2 acknowledges financial support from the Spanish MICINN projects TAPHOR (Grant MAT2012-31392), nanoTHERM (Grant No. CSD2010-0044), and the FP7 projects NANOTEG-ENIAC (Grant No. 270789-2), NANOTHERM (Grant No. 318117), and MERGING (Grant No. 309150). M.R.W. gratefully acknowledges the Marie Curie Fellowship (IEF) HeatProNano (Grant No. 628197). L.Q. acknowledges support through the China Scholarship Council., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phonon dispersion in hypersonic two-dimensional phononic crystal membranes

  • Graczykowski, Bartlomiej
  • Sledzinska, Marianna
  • Alzina, Francesc
  • Gomis-Bresco, J.
  • Reparaz, J. S.
  • Wagner, M. R.
  • Sotomayor Torres, C. M.
Under the terms of the Creative Commons Attribution License 3.0 (CC-BY)., We investigate experimentally and theoretically the acoustic phonon propagation in two-dimensional phononic crystal membranes. Solid-air and solid-solid phononic crystals were made of square lattices of holes and Au pillars in and on 250 nm thick single crystalline Si membrane, respectively. The hypersonic phonon dispersion was investigated using Brillouin light scattering. Volume reduction (holes) or mass loading (pillars) accompanied with second-order periodicity and local resonances are shown to significantly modify the propagation of thermally activated GHz phonons. We use numerical modeling based on the finite element method to analyze the experimental results and determine polarization, symmetry, or three-dimensional localization of observed modes., The authors acknowledge financial support from the European FP7 project MERGING (Grant No. 309150), the Spanish MINECO projects nanoTHERM (Grant No. CSD2010-0044) and TAPHOR (MAT2012-31392) and the program Severo Ochoa (Grant SEV-2013-0295). M.R.W. acknowledges support of the Marie Curie Fellowship HeatProNano (Grant No. 628197)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning thermal transport in ultrathin silicon membranes by surface nanoscale engineering

  • Neogi, Sanghamitra
  • Reparaz, J. S.
  • Pereira, Luiz Felipe C.
  • Graczykowski, Bartlomiej
  • Wagner, M. R.
  • Sledzinska, Marianna
  • Shchepetov, A.
  • Prunnila, M.
  • Ahopelto, Jouni
  • Sotomayor Torres, C. M.
  • Donadio, Davide
ACS AuthorChoice - This is an open access article published under an ACS AuthorChoice License, which permits copying and redistribution of the article or any adaptations for non-commercial purposes., A detailed understanding of the connections of fabrication and processing to structural and thermal properties of low-dimensional nanostructures is essential to design materials and devices for phononics, nanoscale thermal management, and thermoelectric applications. Silicon provides an ideal platform to study the relations between structure and heat transport since its thermal conductivity can be tuned over 2 orders of magnitude by nanostructuring. Combining realistic atomistic modeling and experiments, we unravel the origin of the thermal conductivity reduction in ultrathin suspended silicon membranes, down to a thickness of 4 nm. Heat transport is mostly controlled by surface scattering: rough layers of native oxide at surfaces limit the mean free path of thermal phonons below 100 nm. Removing the oxide layers by chemical processing allows us to tune the thermal conductivity over 1 order of magnitude. Our results guide materials design for future phononic applications, setting the length scale at which nanostructuring affects thermal phonons most effectively., This work is partly funded by the European Commission FP7-ENERGY-FET project MERGING, NMP QUANTIHEAT and ICT NANOTHERM, with Grant Agreement Nrs: 309150, 604668 and 318117, respectively. S.N. and D.D. acknowledge financial support from MPG under the MPRG program. J.S.R., M.R.W., and C.M.S.T. acknowledge support form the Spanish MINECO projects TAPHOR (MAT-2012-31392) and nanoTHERM (CONSOLIDER CSD2010-00044). M.R.W. acknowledges support of the Marie Curie Postdoctoral Fellowship HeatProNano (Grant No. 628197). M.P. and A.S. acknowledge funding from the Academy of Finland (Grant No. 252598)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Catalytically doped semiconductors for chemical gas sensing: Aerogel-like aluminum-containing zinc oxide materials prepared in the gas phase

  • Hagedorn, Kay
  • Wagner, M. R.
  • Reparaz, J. S.
  • Polarz, Sebastian
et al., Atmospheric contamination with organic compounds is undesired in industry and in society because of odor nuisance or potential toxicity. Resistive gas sensors made of semiconducting metal oxides are effective in the detection of gases even at low concentration. Major drawbacks are low selectivity and missing sensitivity toward a targeted compound. Acetaldehyde is selected due to its high relevance in chemical industry and its toxic character. Considering the similarity between gas-sensing and heterogeneous catalysis (surface reactions, activity, selectivity), it is tempting to transfer concepts. A question of importance is how doping and the resulting change in electronic properties of a metal-oxide support with semiconducting properties alters reactivity of the surfaces and the functionality in gas-sensing and in heterogeneous catalysis. A gas-phase synthesis method is employed for aerogel-like zinc oxide materials with a defined content of aluminum (n-doping), which were then used for the assembly of gas sensors. It is shown that only Al-doped ZnO represents an effective sensor material that is sensitive down to very low concentrations (<350 ppb). The advance in properties relates to a catalytic effect for the doped semiconductor nanomaterial., S.P. and K.H. gratefully acknowledge funding from the Carl-Zeiss Foundation (project REFINE). M.R.W. acknowledges the postdoctoral Marie Curie Fellowship (IEF) HeatProNano (Grant No. 628197), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Two-dimensional phononic crystals: Disorder matters

  • Wagner, M. R.
  • Graczykowski, Bartlomiej
  • Reparaz, J. S.
  • Sachat, Alexandros el
  • Sledzinska, Marianna
  • Alzina, Francesc
  • Sotomayor Torres, C. M.
The design and fabrication of phononic crystals (PnCs) hold the key to control the propagation of heat and sound at the nanoscale. However, there is a lack of experimental studies addressing the impact of order/disorder on the phononic properties of PnCs. Here, we present a comparative investigation of the influence of disorder on the hypersonic and thermal properties of two-dimensional PnCs. PnCs of ordered and disordered lattices are fabricated of circular holes with equal filling fractions in free-standing Si membranes. Ultrafast pump and probe spectroscopy (asynchronous optical sampling) and Raman thermometry based on a novel two-laser approach are used to study the phononic properties in the gigahertz (GHz) and terahertz (THz) regime, respectively. Finite element method simulations of the phonon dispersion relation and three-dimensional displacement fields furthermore enable the unique identification of the different hypersonic vibrations. The increase of surface roughness and the introduction of short-range disorder are shown to modify the phonon dispersion and phonon coherence in the hypersonic (GHz) range without affecting the room-temperature thermal conductivity. On the basis of these findings, we suggest a criteria for predicting phonon coherence as a function of roughness and disorder., The authors acknowledge financial support from the EU FP7 project MERGING (Grant 309150), NANO-RF (Grant 318352), and QUANTIHEAT (Grant 604668); the Spanish MICINN projects nanoTHERM (Grant CSD2010-0044) and PHENTOM (FIS2015-70862-P); and the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). M.R.W. acknowledges the postdoctoral Marie Curie Fellowship (IEF) HeatProNano (Grant 628197)., Peer Reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A single-source precursor route to anisotropic halogen-doped zinc oxide particles as a promising candidate for new transparent conducting oxide materials

  • Lehr, Daniela
  • Wagner, Markus R.|||0000-0002-7367-5629
  • Flock, Johanna
  • Reparaz, Juan Sebastián|||0000-0001-9679-0075
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Klaiber, Alexander
  • Dekorsy, Thomas
  • Polarz, Sebastian
Numerous applications in optoelectronics require electrically conducting materials with high optical transparency over the entire visible light range. A solid solution of indium oxide and substantial amounts of tin oxide for electronic doping (ITO) is currently the most prominent example for the class of so-called TCOs (transparent conducting oxides). Due to the limited, natural occurrence of indium and its steadily increasing price, it is highly desired to identify materials alternatives containing highly abundant chemical elements. The doping of other metal oxides (e.g., zinc oxide, ZnO) is a promising approach, but two problems can be identified. Phase separation might occur at the required high concentration of the doping element, and for successful electronic modification it is mandatory that the introduced heteroelement occupies a defined position in the lattice of the host material. In the case of ZnO, most attention has been attributed so far to n-doping via substitution of Zn²+ by other metals (e.g., Al³+). Here, we present first steps towards n-doped ZnO-based TCO materials via substitution in the anion lattice (O²- versus halogenides). A special approach is presented, using novel single-source precursors containing a potential excerpt of the target lattice 'HalZn·Zn₃O₃' preorganized on the molecular scale (Hal = I, Br, Cl). We report about the synthesis of the precursors, their transformation into halogene-containing ZnO materials, and finally structural, optical and electronic properties are investigated using a combination of techniques including FT-Raman, low- T photoluminescence, impedance and THz spectroscopies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Correction, A single-source precursor route to anisotropic halogen-doped zinc oxide particles as a promising candidate for new transparent conducting oxide materials

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Localized thinning for strain concentration in suspended germanium membranes and optical method for precise thickness measurement

  • Vaccaro, Pablo Oscar
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Garriga, Miquel|||0000-0002-6683-0790
  • Gutiérrez, Joffre
  • Peró, Damià
  • Wagner, Markus R.|||0000-0002-7367-5629
  • Reparaz, Juan Sebastián|||0000-0001-9679-0075
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Vidal, Xavier|||0000-0001-8026-2016
  • Carter, E. A.
  • Lay, P. A.
  • Yoshimoto, M.
  • Goñi, Alejandro|||0000-0002-1193-3063
We deposited Ge layers on (001) Si substrates by molecular beam epitaxy and used them to fabricate suspended membranes with high uniaxial tensile strain. We demonstrate a CMOS-compatible fabrication strategy to increase strain concentration and to eliminate the Ge buffer layer near the Ge/Si hetero-interface deposited at low temperature. This is achieved by a two-steps patterning and selective etching process. First, a bridge and neck shape is patterned in the Ge membrane, then the neck is thinned from both top and bottom sides. Uniaxial tensile strain values higher than 3% were measured by Raman scattering in a Ge membrane of 76 nm thickness. For the challenging thickness measurement on micrometer-size membranes suspended far away from the substrate a characterization method based on pump-and-probe reflectivity measurements was applied, using an asynchronous optical sampling technique.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nanoparticle shape anisotropy and photoluminescence properties, Europium containing ZnO as a model case

  • Gerigk, Melanie
  • Ehrenreich, Philipp
  • Wagner, Markus R.|||0000-0002-7367-5629
  • Wimmer, Ilona
  • Reparaz, Juan Sebastián|||0000-0001-9679-0075
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Schmidt-Mende, Lukas
  • Polarz, Sebastian
The precise control over electronic and optical properties of semiconductor (SC) materials is pivotal for a number of important applications like in optoelectronics, photocatalysis or in medicine. It is well known that the incorporation of heteroelements (doping as a classical case) is a powerful method for adjusting and enhancing the functionality of semiconductors. Independent from that, there already has been a tremendous progress regarding the synthesis of differently sized and shaped SC nanoparticles, and quantum-size effects are well documented experimentally and theoretically. Whereas size and shape control of nanoparticles work fairly well for the pure compounds, the presence of a heteroelement is problematic because the impurities interfere strongly with bottom up approaches applied for the synthesis of such particles, and effects are even stronger, when the heteroelement is aimed to be incorporated into the target lattice for chemical doping. Therefore, realizing coincident shape control of nanoparticle colloids and their doping still pose major difficulties. Due to a special mechanism of the emulsion based synthesis method presented here, involving a gelation of emulsion droplets prior to crystallization of shape-anisotropic ZnO nanoparticles, heteroelements can be effectively entrapped inside the lattice. Different nanocrystal shapes such as nanorods, -prisms, -plates, and -spheres can be obtained, determined by the use of certain emulsification agents. The degree of morphologic alterations depends on the type of incorporated heteroelement M, concentration, and it seems that some shapes are more tolerant against doping than others. Focus was then set on the incorporation of Eu³⁺ inside the ZnO particles, and it was shown that nanocrystal shape and aspect ratios could be adjusted while maintaining a fixed dopant level. Special PL properties could be observed implying energy transfer from ZnO excited near its band-gap (3.3 eV) to the Eu³⁺ states mediated by defect luminescence of the nanoparticles. Indications for an influence of shape on photoluminescence (PL) properties were found. Finally, rod-like Eu@ZnO colloids were used as tracers to investigate their uptake into biological samples like HeLa cells. The PL was sufficient for identifying green and red emission under visible light excitation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tuning Thermal Transport in Ultrathin Silicon Membranes by Surface Nanoscale Engineering

  • Neogi, Sanghamitra
  • Reparaz, Juan Sebastián|||0000-0001-9679-0075
  • Pereira, Luiz Felipe C.
  • Graczykowski, Bartlomiej|||0000-0003-4787-8622
  • Wagner, Markus R.|||0000-0002-7367-5629
  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Shchepetov, Andrey
  • Prunnila, Mika
  • Ahopelto, Jouni|||0000-0003-3372-6097
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Donadio, Davide|||0000-0002-2150-4182
A detailed understanding of the connections of fabrication and processing to structural and thermal properties of low-dimensional nanostructures is essential to design materials and devices for phononics, nanoscale thermal management, and thermoelectric applications. Silicon provides an ideal platform to study the relations between structure and heat transport since its thermal conductivity can be tuned over 2 orders of magnitude by nanostructuring. Combining realistic atomistic modeling and experiments, we unravel the origin of the thermal conductivity reduction in ultrathin suspended silicon membranes, down to a thickness of 4 nm. Heat transport is mostly controlled by surface scattering: rough layers of native oxide at surfaces limit the mean free path of thermal phonons below 100 nm. Removing the oxide layers by chemical processing allows us to tune the thermal conductivity over 1 order of magnitude. Our results guide materials design for future phononic applications, setting the length scale at which nanostructuring affects thermal phonons most effectively.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Two-Dimensional Phononic Crystals, Disorder Matters

  • Wagner, Markus R.|||0000-0002-7367-5629
  • Graczykowski, Bartlomiej|||0000-0003-4787-8622
  • Reparaz, Juan Sebastián|||0000-0001-9679-0075
  • Sachat, Alexandros el|||0000-0003-3798-9724
  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Alzina, Francesc|||0000-0002-7082-0624
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
The design and fabrication of phononic crystals (PnCs) hold the key to control the propagation of heat and sound at the nanoscale. However, there is a lack of experimental studies addressing the impact of order/disorder on the phononic properties of PnCs. Here, we present a comparative investigation of the influence of disorder on the hypersonic and thermal properties of two-dimensional PnCs. PnCs of ordered and disordered lattices are fabricated of circular holes with equal filling fractions in free-standing Si membranes. Ultrafast pump and probe spectroscopy (asynchronous optical sampling) and Raman thermometry based on a novel two-laser approach are used to study the phononic properties in the gigahertz (GHz) and terahertz (THz) regime, respectively. Finite element method simulations of the phonon dispersion relation and three-dimensional displacement fields furthermore enable the unique identification of the different hypersonic vibrations. The increase of surface roughness and the introduction of short-range disorder are shown to modify the phonon dispersion and phonon coherence in the hypersonic (GHz) range without affecting the room-temperature thermal conductivity. On the basis of these findings, we suggest a criteria for predicting phonon coherence as a function of roughness and disorder.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Optical and mechanical properties of nanofibrillated cellulose, Toward a robust platform for next-generation green technologies

  • Delgado Simao, Claudia|||0000-0003-3837-9311
  • Reparaz, Juan Sebastian
  • Wagner, Markus R.|||0000-0002-7367-5629
  • Graczykowski, Bartlomiej|||0000-0003-4787-8622
  • Kreuzer, Martin|||0000-0002-7305-5016
  • Ruiz-Blanco, Yasser|||0000-0001-5400-4427
  • García, Yamila
  • Malho, Jani-Markus
  • Goñi, Alejandro|||0000-0002-1193-3063
  • Ahopelto, Jouni|||0000-0003-3372-6097
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
Nanofibrillated cellulose, a polymer that can be obtained from one of the most abundant biopolymers in nature, is being increasingly explored due to its outstanding properties for packaging and device applications. Still, open challenges in engineering its intrinsic properties remain to address. To elucidate the optical and mechanical stability of nanofibrillated cellulose as a standalone platform, herein we report on three main findings: (i) for the first time an experimental determination of the optical bandgap of nanofibrillated cellulose, important for future modeling purposes, based on the onset of the optical bandgap of the nanofibrillated cellulose film at E ≈ 275 nm (4.5 eV), obtained using absorption and cathodoluminescence measurements. In addition, comparing this result with ab-initio calculations of the electronic structure the exciton binding energy is estimated to be E ≈ 800 meV; (ii) hydrostatic pressure experiments revealed that nanofibrillated cellulose is structurally stable at least up to 1.2 GPa; and (iii) surface elastic properties with repeatability better than 5% were observed under moisture cycles with changes of the Young modulus as large as 65%. The results obtained show the precise determination of significant properties as elastic properties and interactions that are compared with similar works and, moreover, demonstrate that nanofibrillated cellulose properties can be reversibly controlled, supporting the extended potential of nanofibrillated cellulose as a robust platform for green-technology applications.