Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Collective thermal transport in pure and alloy semiconductors

  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Mohammed, Amr
  • Torello Massana, Alvar|||0000-0002-4173-2529
  • Bafaluy, Javier|||0000-0003-1972-9339
  • Camacho, Juan|||0000-0002-8095-4167
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Shakouri, Ali
  • Alvarez, F. Xavier|||0000-0001-6746-2144
Conventional models for predicting thermal conductivity of alloys usually assume a pure kinetic regime as alloy scattering dominates normal processes. However, some discrepancies between these models and experiments at very small alloy concentrations have been reported. In this work, we use the full first principles kinetic collective model (KCM) to calculate the thermal conductivity of Si1-xGex and InxGa1-xAs alloys. The calculated thermal conductivities match well with the experimental data for all alloy concentrations. The model shows that the collective contribution must be taken into account at very low impurity concentrations. For higher concentrations, the collective contribution is suppressed, but normal collisions have the effect of significantly reducing the kinetic contribution. The study thus shows the importance of the proper inclusion of normal processes even for alloys for accurate modeling of thermal transport. Furthermore, the phonon spectral distribution of the thermal conductivity is studied in the framework of KCM, providing insights to interpret the superdiffusive regime introduced in the truncated Lévy flight framework.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Scalable Block-Tridiagonal Eigensolvers in the Context of Electronic Structure Calculations

  • Lamas Daviña, Alejandro
  • Jose E. Roman|||0000-0003-1144-6772
  • Cartoixà, Xavier
[EN] In computer-based numerical simulations, some methods to determine the electronic and optical properties of semiconductor nanostructures, require computing the energies that correspond to the interior eigenvalues of a Hamiltonian matrix. We study the case in which the Schrödinger equation is expanded into a matrix that has a block-tridiagonal structure. Additionally, the matrix can have two extra non zero blocks in the corners due to periodic boundary conditions. Given that not the whole eigenspectrum is required, we choose to use projection methods to compute the necessary set of eigenvalues. The shift-and-invert Lanczos method requires to solve a linear system at each iteration. We have developed a parallel code that improves the scalability of this step by exploiting the block structure. Results show that, to solve these specific cases, this method offers better scalability when compared to a general-purpose solver such as MUMPS., The authors would like to acknowledge the support by Agencia Estatal de Investigacion under project TIN2016-75985-P, which includes European Commission ERDF funds, and the Spanish Ministerio de Economia y Competitividad under project No. TEC2015-67462-C2-1-R (MINECO/FEDER). Also, this work has received funding from the European Union¿s Horizon 2020 research and innovation program under grant agreement No 696656, and the Department d¿Universitats, Recerca i Societat de la Informacio of the Generalitat de Catalunya under contract 2014-SGR-384. Alejandro Lamas Davi¿na was supported by the Spanish Ministry of Education, Culture and Sport through grant FPU13-06655. The authors are also grateful for the resources provided by the Spanish Supercomputing Network.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Analysis of set and reset mechanisms in Ni/HfO2-based RRAM with fast ramped voltages

  • Maestro Izquierdo, Marcos|||0000-0002-8940-9050
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Diaz-Fortuny, Javier|||0000-0002-8186-071X
  • Crespo-Yepes, A.|||0000-0003-4618-651X
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Rodriguez, R.|||0000-0002-4565-6703
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Aymerich Humet, Xavier|||0000-0002-5874-6257
The resistive switching phenomenon is analyzed using a purposely developed setup which allows fast ramped voltages and measurements in the time domain.Taking advantage of these capabilities, the Set and Reset processes in Ni/HfO2 structures have been studied for a large range of voltage ramp speeds. The results obtained show that Set and Reset voltages increase with voltage ramp speed. The use of time domain measurements has allowed concluding that a critical energy is needed to trigger the Set and Reset processes, independently of the biasing conditions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Conductive-AFM topography and current maps simulator for the study of polycrystalline high-k dielectrics

  • Couso, Carlos|||0000-0003-4757-2439
  • Porti i Pujal, Marc|||0000-0001-7438-3823
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Iglesias Santiso, Vanessa|||0000-0001-5831-0974
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Aymerich Humet, Xavier|||0000-0002-5874-6257
In this work, a simulator of conductive atomic force microscopy (C-AFM) was developed to reproduce topography and current maps. In order to test the results, the authors used the simulator to investigate the influence of the C-AFM tip on topography measurements of polycrystalline high-k dielectrics, and compared the results with experimental data. The results show that this tool can produce topography images with the same morphological characteristics as the experimental samples under study. Additionally, the current at each location of the dielectric stack was calculated. The quantum mechanical transmission coefficient and tunneling current were obtained from the band diagram by applying the Airy wavefunction approach. Good agreement between experimental and simulation results indicates that the tool can be very useful for evaluating how the experimental parameters influence C-AFM measurements.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Dedicated random telegraph noise characterization of Ni/HfO2-based RRAM devices

  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Acero Leal, María Cruz
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Aymerich Humet, Xavier|||0000-0002-5874-6257
In this work, random telegraph noise (RTN) associated to discrete current fluctuations in the high resistive state of Ni/HfO2-based RRAM devices is investigated. For this purpose, a dedicated software tool has been developed to control the instrumentation and to perform successive and smart RTN measurements in the time domain. After data acquisition, the advanced Weighted Time Lag (WTL) method is employed to accurately identify the contribution of multiple electrically active defects in multilevel RTN signals. Finally, the internal dynamics of trapping and de-trapping processes through the defects close to the filamentary path and its dependence on voltage and time are analyzed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Monitoring defects in III-V materials, a nanoscale CAFM study

  • Iglesias Santiso, Vanessa|||0000-0001-5831-0974
  • Wu, Q.
  • Porti i Pujal, Marc|||0000-0001-7438-3823
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Bersuker, G.
  • Cordes, A.
The implementation of high mobility devices requires growing III-V materials on silicon substrates. However, due to the lattice mismatch between these materials, III-V semiconductors tend to develop structural defects affecting device electrical characteristics. In this study, the CAFM technique is employed for identification and analysis of nanoscale defects, in particular, Threading Dislocations (TD), Stacking faults (SF) and Anti-phase Boundaries (APB), in III-V materials grown over silicon wafers.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Short channel effects in graphene-based field effect transistors targeting radio-frequency applications

  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Jiménez, David|||0000-0002-8148-198X
  • Cartoixà, Xavier|||0000-0003-1905-5979
Channel length scaling in graphene field effect transistors (GFETs) is key in the pursuit of higher performance in radio frequency electronics for both rigid and flexible substrates. Although twodimensional (2D) materials provide a superior immunity to short channel effects (SCEs) than bulk materials, they could dominate in scaled GFETs. In this work, we have developed a model that calculates electron and hole transport along the graphene channel in a drift-diffusion basis, while considering the 2D electrostatics. Our model obtains the self-consistent solution of the 2D Poisson's equation coupled to the current continuity equation, the latter embedding an appropriate model for drift velocity saturation.Wehave studied the role played by the electrostatics and the velocity saturation in GFETs with short channel lengths L. Severe scaling results in a high degradation of GFET output conductance. The extrinsic cutoff frequency follows a 1/L^n scaling trend,where the index n fulfills n < 2. The case n = 2 corresponds to long-channel GFETs with low source/drain series resistance, that is, devices where the channel resistance is controlling the drain current. For high series resistance, n decreases down to n = 1, and it degrades to values of n < 1 because of the SCEs, especially at high drain bias. The model predicts high máximum oscillation frequencies above 1 THz for channel lengths below 100 nm, but, in order to obtain these frequencies, it is very important to minimize the gate series resistance. The model shows very good agreement with experimental current voltage curves obtained from short channel GFETs and also reproduces negative differential resistance, which is due to a reduction of diffusion current.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Non-homogeneuos conduction of conductive filaments in Ni/HfO2/Si resistive switching structures observed with CAFM

  • Claramunt, Sergi|||0000-0002-2888-7825
  • Wu, Qian
  • Maestro Izquierdo, Marcos|||0000-0002-8940-9050
  • Porti i Pujal, Marc|||0000-0001-7438-3823
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Nafria, Montserrat|||0000-0002-9549-2890
Conductive filaments (CFs) in Ni/HfO₂/Si resistive switching structures are analysed at the nanoscale by means of Conductive Atomic Force Microscopy (CAFM). Differences in the CF conductivity are measured depending on the resistive state of the device. Moreover, for both resistance states, non-homogeneous conduction across the CF area is observed, in agreement with a tree-shaped CF.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Channel-Hot-Carrier degradation of strained MOSFETs, A device level and nanoscale combined approach

  • Wu, Qian
  • Porti i Pujal, Marc|||0000-0001-7438-3823
  • Bayerl, Albin
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Aymerich Humet, Xavier|||0000-0002-5874-6257
  • Simoen, E.
Strained MOSFETs with SiGe at the source/drain regions and different channel lengths have been studied at the nanoscale with a conductive atomic force microscope (CAFM) and at device level, before and after channel-hot-carrier (CHC) stress. The results show that although strained devices have a larger mobility, they are more sensitive to CHC stress. This effect has been observed to be larger in short channel devices. The higher susceptibility of strained MOSFETs to the stress has been related to a larger density of defects close to the diffusions, as suggested by CAFM data.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Current-limiting and ultrafast system for the characterization of resistive random access memories

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Conductance of threading dislocations in InGaAs/Si stacks by temperature-CAFM measurements

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

New high resolution random telegraph noise (RTN) characterization method for resistive RAM

  • Maestro Izquierdo, Marcos|||0000-0002-8940-9050
  • Diaz-Fortuny, Javier|||0000-0002-8186-071X
  • Crespo-Yepes, A.|||0000-0003-4618-651X
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Aymerich Humet, Xavier|||0000-0002-5874-6257
Random Telegraph Noise (RTN) is one of the main reliability problems of resistive switching-based memories. To understand the physics behind RTN, a complete and accurate RTN characterization is required. The standard equipment used to analyse RTN has a typical time resolution of ∼2 ms which prevents evaluating fast phenomena. In this work, a new RTN measurement procedure, which increases the measurement time resolution to 2 μs, is proposed. The experimental set-up, together with the recently proposed Weighted Time Lag (W-LT) method for the analysis of RTN signals, allows obtaining a more detailed and precise information about the RTN phenomenon.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal transport in porous Si nanowires from approach-to-equilibrium molecular dynamics calculations

  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Dettori, Riccardo|||0000-0002-4678-1098
  • Melis, Claudio|||0000-0002-5768-8403
  • Colombo, Luciano|||0000-0001-5335-4652
  • Rurali, Riccardo|||0000-0002-4086-4191
We study thermal transport in porous Si nanowires (SiNWs) by means of approach-to-equilibrium molecular dynamics simulations. We show that the presence of pores greatly reduces the thermal conductivity, κ, of the SiNWs as long mean free path phonons are suppressed. We address explicitly the dependence of κ on different features of the pore topology-such as the porosity and the pore diameter-and on the nanowire (NW) geometry-diameter and length. We use the results of the molecular dynamics calculations to tune an effective model, which is capable of capturing the dependence of κ on porosity and NW diameter. The model illustrates the failure of Matthiessen's rule to describe the coupling between boundary and pore scattering, which we account for by the inclusion of an additional empirical term.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The role of the Fermi level pinning in gate tunable graphene-semiconductor junctions

  • Chaves Romero, Ferney Alveiro|||0000-0001-9506-4485
  • Jiménez, David|||0000-0002-8148-198X
Graphene based transistors relying on a conventional structure cannot switch properly because of the absence of an energy gap in graphene. To overcome this limitation, a barristor device was proposed, whose operation is based on the modulation of the graphene-semiconductor (GS) Schottky barrier by means of a top gate, and demonstrating an ON-OFF current ratio up to 10⁵. Such a large number is likely due to the realization of an ultra clean interface with virtually no interface trapped charge. However, it is indeed technologically relevant to know the impact that the interface trapped charges might have on the barristor's electrical properties. We have developed a physics based model of the gate tunable GS heterostructure where non-idealities such as Fermi Level Pinning (FLP) and a "bias dependent barrier lowering effect" has been considered. Using the model we have made a comprehensive study of the barristor's expected digital performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Analysis on the filament structure evolution in reset transition of Cu/HfO₂/Pt RRAM device

  • Zhang, Meiyun
  • Long, Shibing
  • Li, Yang
  • Liu, Qi|||0000-0002-5183-1125
  • Lv, Hangbing|||0000-0003-4727-9224
  • Miranda, E.|||0000-0003-0470-5318
  • Suñé, Jordi|||0000-0003-0108-4907
  • Liu, Ming
The resistive switching (RS) process of resistive random access memory (RRAM) is dynamically correlated with the evolution process of conductive path or conductive filament (CF) during its breakdown (rupture) and recovery (reformation). In this study, a statistical evaluation method is developed to analyze the filament structure evolution process in the reset operation of Cu/HfO₂/Pt RRAM device. This method is based on a specific functional relationship between the Weibull slopes of reset parameters' distributions and the CF resistance (R on). The CF of the Cu/HfO₂/Pt device is demonstrated to be ruptured abruptly, and the CF structure of the device has completely degraded in the reset point. Since no intermediate states are generated in the abrupt reset process, it is quite favorable for the reliable and stable one-bit operation in RRAM device. Finally, on the basis of the cell-based analytical thermal dissolution model, a Monte Carlo (MC) simulation is implemented to further verify the experimental results. This work provides inspiration for RRAM reliability and performance design to put RRAM into practical application.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Full-field thermal imaging of quasiballistic crosstalk reduction in nanoscale devices

  • Ziabari, Amir Koushyar|||0000-0003-4776-457X
  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Vermeersch, Bjorn
  • Xuan, Yi
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Torelló, Alvar
  • Bahk, Je-Hyeong
  • Koh, Yee Rui
  • Parsa, Maryam
  • Ye, Peide D.
  • Alvarez, F. Xavier|||0000-0001-6746-2144
  • Shakouri, Ali
Understanding nanoscale thermal transport is of substantial importance for designing contemporary semiconductor technologies. Heat removal from small sources is well established to be severely impeded compared to diffusive predictions due to the ballistic nature of the dominant heat carriers. Experimental observations are commonly interpreted through a reduction of effective thermal conductivity, even though most measurements only probe a single aggregate thermal metric. Here, we employ thermoreflectance thermal imaging to directly visualise the 2D temperature field produced by localised heat sources on InGaAs with characteristic widths down to 100 nm. Besides displaying effective thermal performance reductions up to 50% at the active junctions in agreement with prior studies, our steady-state thermal images reveal that, remarkably, 1-3 μm adjacent to submicron devices the crosstalk is actually reduced by up to fourfold. Submicrosecond transient imaging additionally shows responses to be faster than conventionally predicted. A possible explanation based on hydrodynamic heat transport, and some open questions, are discussed. When thermal fields in semiconductors approach the submicron scale, non-diffusive heat transport is observed where Fourier based heat transport models fail. Here, the authors use thermal imaging to visualise these thermal field variations and in turn derive a hydrodynamic heat transport model.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Scaling properties of polycrystalline graphene, A review

  • Isacsson, Andreas
  • Cummings, Aron|||0000-0003-2307-497X
  • Colombo, Luciano|||0000-0001-5335-4652
  • Colombo, Luigi|||0000-0002-9048-3565
  • Kinaret, Jari M.
  • Roche, Stephan|||0000-0003-0323-4665
We present an overview of the electrical, mechanical, and thermal properties of polycrystalline graphene. Most global properties of this material, such as the charge mobility, thermal conductivity, or Young's modulus, are sensitive to its microstructure, for instance the grain size and the presence of line or point defects. Both the local and global features of polycrystalline graphene have been investigated by a variety of simulations and experimental measurements. In this review, we summarize the properties of polycrystalline graphene, and by establishing a perspective on how the microstructure impacts its large-scale physical properties, we aim to provide guidance for further optimization and improvement of applications based on this material, such as flexible and wearable electronics, and high-frequency or spintronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal boundary resistance in semiconductors by non-equilibrium thermodynamics

  • Dettori, Riccardo|||0000-0002-4678-1098
  • Melis, Claudio|||0000-0002-5768-8403
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Colombo, Luciano|||0000-0001-5335-4652
We critically address the problem of predicting the thermal boundary resistance at the interface between two semiconductors by atomistic simulations. After reviewing the available models, lattice dynamics calculations and molecular dynamics simulation protocols, we reformulate this problem in the language of non-equilibrium thermodynamics, providing an elegant, robust and valuable theoretical framework for the direct calculation of the thermal boundary resistance through molecular dynamics simulations. The foundation of the method, as well as its subtleties and the details of its actual implementation are presented. Finally, the Si/Ge interface showcase is discussed as the prototypical example of semiconductor heterojunction whose thermal properties are paramount in many front-edge nanotechnologies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Heat transport through a solid-solid junction, The interface as an autonomous thermodynamic system

  • Rurali, Riccardo|||0000-0002-4086-4191
  • Colombo, Luciano|||0000-0001-5335-4652
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Øivind, Wilhelmsen
  • Trinh, Thuat T.
  • Bedeaux, Dick
  • Kjelstrup, Signe
We perform computational experiments using nonequilibrium molecular dynamics simulations, showing that the interface between two solid materials can be described as an autonomous thermodynamic system. We verify the local equilibrium and give support to the Gibbs description of the interface also away from the global equilibrium. In doing so, we reconcile the common formulation of the thermal boundary resistance as the ratio between the temperature discontinuity at the interface and the heat flux with a more rigorous derivation from nonequilibrium thermodynamics. We also show that thermal boundary resistance of a junction between two pure solid materials can be regarded as an interface property, depending solely on the interface temperature, as implicitly assumed in some widely used continuum models, such as the acoustic mismatch model. Thermal rectification can be understood on the basis of different interface temperatures for the two flow directions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal rectification in silicon by a graded distribution of defects

  • Dettori, Riccardo|||0000-0002-4678-1098
  • Melis, Claudio|||0000-0002-5768-8403
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Colombo, Luciano|||0000-0001-5335-4652
We discuss about computer experiments based on nonequilibrium molecular dynamics simulations providing evidence that thermal rectification can be obtained in bulk Si by a non-uniform distribution of defects. We consider a graded population of both Ge substitutional defects and nanovoids, distributed along the direction of an applied thermal bias, and predict a rectification factor comparable to what is observed in other low-dimensional Si-based nanostructures. By considering several defect distribution profiles, thermal bias conditions, and sample sizes, the present results suggest that a possible way for tuning the thermal rectification is by defect engineering.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

MOSFET degradation dependence on input signal power in a RF power amplifier

  • Crespo-Yepes, A.|||0000-0003-4618-651X
  • Barajas, Enrique|||0000-0002-2072-2268
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Mateo, Diego|||0000-0001-5996-9092
  • Aragones, Xavier|||0000-0003-1352-8675
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
Aging produced by RF stress is experimentally analyzed on a RF CMOS power amplifier (PA), as a function of the stress power level. The selected circuit topology allows observing individual NMOS and PMOS transistors degradations, as well as the aging effect on the circuit functionality. A direct relation between DC MOSFETs and RF PA (gain) parameters has been observed. NMOS degradation (both in mobility and Vth) is stronger than that of the PMOS. Results suggest that transistors mobility reduction is the main cause of the RF degradation in this circuit.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Experimental verification of memristor-based material implication NAND operation

  • Maestro Izquierdo, Marcos|||0000-0002-8940-9050
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Crespo-Yepes, A.|||0000-0003-4618-651X
  • Escudero, Manel
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Aymerich Humet, Xavier|||0000-0002-5874-6257
  • Rubio, Antonio|||0000-0003-1625-1472
Memristors are being considered as promising devices for highly dense memory systems as well as the potential basis of new computational paradigms. In this scenario, and in relation with data processing, one of the more specific and differential logic functions is the material implication logic also named as IMPLY logic. Many papers have been published in this framework but few of them are related with experimental works using real memristor devices. In the paper authors show the verification of the IMPLY function by using Ni/HfO2/Si manufactured devices and laboratory measurements. The proper behavior of the IMPLY structure (2 memristors) has been shown. The paper also verifies the proper operation of a two-step IMPLY-based NAND gate implementation, showing the electrical behavior of the circuit in a cycling operation. A new procedure to implement a NAND gate that requires only one step is experimentally shown as well.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Low-power, high-performance, non-volatile inkjet-printed HfO 2 -based resistive random access memory, from device to nanoscale characterization

  • Vescio, Giovanni|||0000-0002-2418-249X
  • Martín, Gemma
  • Crespo-Yepes, A.|||0000-0003-4618-651X
  • Claramunt, Sergi|||0000-0002-2888-7825
  • Alonso Pérez, Daniel
  • Lopez-Vidrier, Julian|||0000-0003-0907-5853
  • Estrade, Sonia|||0000-0002-3340-877X
  • Porti i Pujal, Marc|||0000-0001-7438-3823
  • Rodriguez, R.|||0000-0002-4565-6703
  • Peiro, Francesca|||0000-0002-5697-0554
  • Cornet, Albert
  • Cirera, Albert|||0000-0002-2075-1536
  • Nafria, Montserrat|||0000-0002-9549-2890
Low-power, high-performance metal-insulator-metal (MIM) non-volatile resistive memories based on HfO2 high-k dielectric are fabricated using a drop-on-demand inkjet printing technique as a low-cost and eco-friendly method. The characteristics of resistive switching of Pt (bottom)/HfO2/Ag (top) stacks on Si/ SiO2 substrates are investigated in order to study the bottom electrode's interaction with the HfO2 dielectric layer and the resulting effects on resistive switching. The devices show low Set and Reset voltages, high ON/OFF current ratio, and relatively low switching current (~1 μA), which are comparable to the characteristics of current commercial CMOS memories. In order to understand the resistive switching mechanism, direct structural observation is carried out by field-emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy (HRTEM) on cross-sectioned samples prepared by focused ion beam (FIB). In addition, electron energy loss spectroscopy (EELS) inspections discard a silver electro-migration effect.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Scaling of graphene field-effect transistors supported on hexagonal boron nitride, Radio-frequency stability as a limiting factor

  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Iglesias, José M.|||0000-0003-0834-1435
  • Martín, María J.
  • Rengel, Raul|||0000-0003-4976-2244
  • Li, Changfeng
  • Kim, Wonjae
  • Riikonen, Juha
  • Lipsanen, Harri|||0000-0003-2487-4645
  • Jiménez, David|||0000-0002-8148-198X
The quality of graphene in nanodevices has increased hugely thanks to the use of hexagonal boron nitride as a supporting layer. This paper studies to which extent hBN together with channel length scaling can be exploited in graphene field-effect transistors (GFETs) to get a competitive radio-frequency (RF) performance. Carrier mobility and saturation velocity were obtained from an ensemble Monte Carlo simulator that accounted for the relevant scattering mechanisms (intrinsic phonons, scattering with impurities and defects, etc). This information is fed into a self-consistent simulator, which solves the drift-diffusion equation coupled with the two-dimensional Poisson's equation to take full account of short channel effects. Simulated GFET characteristics were benchmarked against experimental data from our fabricated devices. Our simulations show that scalability is supposed to bring to RF performance an improvement that is, however, highly limited by instability. Despite the possibility of a lower performance, a careful choice of the bias point can avoid instability. Nevertheless, maximum oscillation frequencies are still achievable in the THz region for channel lengths of a few hundreds of nanometers.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Radio frequency performance projection and stability tradeoff of h-BN encapsulated graphene field-effect transistors

  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Iglesias, José M.|||0000-0003-0834-1435
  • Hamham, El Mokhtar|||0000-0002-1598-0895
  • Rengel, Raul|||0000-0003-4976-2244
  • Jiménez, David|||0000-0002-8148-198X
Hexagonal boron nitride encapsulation significantly improves carrier transport in graphene. This paper investigates the benefit of implementing the encapsulation technique in graphene field-effect transistors (GFETs) in terms of their intrinsic radio frequency (RF) performance, adding the effect of the series resistances at the terminals. For such a purpose, a drift-diffusion self-consistent simulator is prepared to get the GFET electrical characteristics. Both the mobility and saturation velocity are obtained by an ensemble Monte Carlo simulator upon considering the relevant scattering mechanisms that affect carrier transport. RF figures of merit are simulated using an accurate small-signal model. Results reveal that the cutoff frequency could scale up to the physical limit given by the inverse of the transit time. Projected maximum oscillation frequencies, in the order of few terahertz, are expected to exceed the values demonstrated by InP and Si-based RF transistors. The existing tradeoff between power gain and stability and the role played by the gate resistance are also studied. High power gain and stability are feasible even if the device is operated far away from current saturation. Finally, the benefits of device unilateralization and the exploitation of the negative differential resistance region to get negative-resistance gain are discussed.