Skip to main content

DISPOSITIVOS ELECTRONICOS DE BAJA DIMENSIONALIDAD PARA APLICACIONES DE RADIOFRECUENCIA Y DIGITALES: SIMULACION Y DESARROLLO DE SOFTWARE

TEC2012-31330

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2012
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Secretaría de Estado de Investigación, Desarrollo e Innovación
Beneficiary centre UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Collective thermal transport in pure and alloy semiconductors

  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Mohammed, Amr
  • Torello Massana, Alvar|||0000-0002-4173-2529
  • Bafaluy, Javier|||0000-0003-1972-9339
  • Camacho, Juan|||0000-0002-8095-4167
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Shakouri, Ali
  • Alvarez, F. Xavier|||0000-0001-6746-2144
Conventional models for predicting thermal conductivity of alloys usually assume a pure kinetic regime as alloy scattering dominates normal processes. However, some discrepancies between these models and experiments at very small alloy concentrations have been reported. In this work, we use the full first principles kinetic collective model (KCM) to calculate the thermal conductivity of Si1-xGex and InxGa1-xAs alloys. The calculated thermal conductivities match well with the experimental data for all alloy concentrations. The model shows that the collective contribution must be taken into account at very low impurity concentrations. For higher concentrations, the collective contribution is suppressed, but normal collisions have the effect of significantly reducing the kinetic contribution. The study thus shows the importance of the proper inclusion of normal processes even for alloys for accurate modeling of thermal transport. Furthermore, the phonon spectral distribution of the thermal conductivity is studied in the framework of KCM, providing insights to interpret the superdiffusive regime introduced in the truncated Lévy flight framework.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Large-signal model of graphene field-effect transistors. Part I, compact modeling of GFET intrinsic capacitances

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Jiménez, David|||0000-0002-8148-198X
We present a circuit-compatible compact model of the intrinsic capacitances of graphene field-effect transistors (GFETs). Together with a compact drain current model, a large-signal model of GFETs is developed combining both models as a tool for simulating the electrical behavior of graphene-based integrated circuits, dealing with the DC, transient behavior, and frequency response of the circuit. The drain current model is based in a drift-diffusion mechanism for the carrier transport coupled with an appropriate field-effect approach. The intrinsic capacitance model consists of a 16-capacitance matrix including self-capacitances and transcapacitances of a four-terminal GFET. To guarantee charge conservation, a Ward-Dutton linear charge partition scheme has been used. The large-signal model has been implemented in Verilog-A, being compatible with conventional circuit simulators and serving as a starting point toward the complete GFET device model that could incorporate additional non-idealities.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Large-signal model of graphene field-effect transistors. Part II, circuit performance benchmarking

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Jiménez, David|||0000-0002-8148-198X
This paper presents a circuit performance benchmarking using the large-signal model of graphene field effect transistor reported in Part I of this two-part paper. To test the model, it has been implemented in a circuit simulator. Specifically we have simulated a high-frequency performance amplifier, together with other circuits that take advantage of the ambipolarity of graphene, such as a frequency doubler, a radio-frequency subharmonic mixer and a multiplier phase detector. A variety of simulations comprising DC, transient dynamics, Bode diagram, S-parameters, and power spectrum have been compared with experimental data to assess the validity of the model.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Short channel effects in graphene-based field effect transistors targeting radio-frequency applications

  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Jiménez, David|||0000-0002-8148-198X
  • Cartoixà, Xavier|||0000-0003-1905-5979
Channel length scaling in graphene field effect transistors (GFETs) is key in the pursuit of higher performance in radio frequency electronics for both rigid and flexible substrates. Although twodimensional (2D) materials provide a superior immunity to short channel effects (SCEs) than bulk materials, they could dominate in scaled GFETs. In this work, we have developed a model that calculates electron and hole transport along the graphene channel in a drift-diffusion basis, while considering the 2D electrostatics. Our model obtains the self-consistent solution of the 2D Poisson's equation coupled to the current continuity equation, the latter embedding an appropriate model for drift velocity saturation.Wehave studied the role played by the electrostatics and the velocity saturation in GFETs with short channel lengths L. Severe scaling results in a high degradation of GFET output conductance. The extrinsic cutoff frequency follows a 1/L^n scaling trend,where the index n fulfills n < 2. The case n = 2 corresponds to long-channel GFETs with low source/drain series resistance, that is, devices where the channel resistance is controlling the drain current. For high series resistance, n decreases down to n = 1, and it degrades to values of n < 1 because of the SCEs, especially at high drain bias. The model predicts high máximum oscillation frequencies above 1 THz for channel lengths below 100 nm, but, in order to obtain these frequencies, it is very important to minimize the gate series resistance. The model shows very good agreement with experimental current voltage curves obtained from short channel GFETs and also reproduces negative differential resistance, which is due to a reduction of diffusion current.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal transport in porous Si nanowires from approach-to-equilibrium molecular dynamics calculations

  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Dettori, Riccardo|||0000-0002-4678-1098
  • Melis, Claudio|||0000-0002-5768-8403
  • Colombo, Luciano|||0000-0001-5335-4652
  • Rurali, Riccardo|||0000-0002-4086-4191
We study thermal transport in porous Si nanowires (SiNWs) by means of approach-to-equilibrium molecular dynamics simulations. We show that the presence of pores greatly reduces the thermal conductivity, κ, of the SiNWs as long mean free path phonons are suppressed. We address explicitly the dependence of κ on different features of the pore topology-such as the porosity and the pore diameter-and on the nanowire (NW) geometry-diameter and length. We use the results of the molecular dynamics calculations to tune an effective model, which is capable of capturing the dependence of κ on porosity and NW diameter. The model illustrates the failure of Matthiessen's rule to describe the coupling between boundary and pore scattering, which we account for by the inclusion of an additional empirical term.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The role of the Fermi level pinning in gate tunable graphene-semiconductor junctions

  • Chaves Romero, Ferney Alveiro|||0000-0001-9506-4485
  • Jiménez, David|||0000-0002-8148-198X
Graphene based transistors relying on a conventional structure cannot switch properly because of the absence of an energy gap in graphene. To overcome this limitation, a barristor device was proposed, whose operation is based on the modulation of the graphene-semiconductor (GS) Schottky barrier by means of a top gate, and demonstrating an ON-OFF current ratio up to 10⁵. Such a large number is likely due to the realization of an ultra clean interface with virtually no interface trapped charge. However, it is indeed technologically relevant to know the impact that the interface trapped charges might have on the barristor's electrical properties. We have developed a physics based model of the gate tunable GS heterostructure where non-idealities such as Fermi Level Pinning (FLP) and a "bias dependent barrier lowering effect" has been considered. Using the model we have made a comprehensive study of the barristor's expected digital performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Scaling properties of polycrystalline graphene, A review

  • Isacsson, Andreas
  • Cummings, Aron|||0000-0003-2307-497X
  • Colombo, Luciano|||0000-0001-5335-4652
  • Colombo, Luigi|||0000-0002-9048-3565
  • Kinaret, Jari M.
  • Roche, Stephan|||0000-0003-0323-4665
We present an overview of the electrical, mechanical, and thermal properties of polycrystalline graphene. Most global properties of this material, such as the charge mobility, thermal conductivity, or Young's modulus, are sensitive to its microstructure, for instance the grain size and the presence of line or point defects. Both the local and global features of polycrystalline graphene have been investigated by a variety of simulations and experimental measurements. In this review, we summarize the properties of polycrystalline graphene, and by establishing a perspective on how the microstructure impacts its large-scale physical properties, we aim to provide guidance for further optimization and improvement of applications based on this material, such as flexible and wearable electronics, and high-frequency or spintronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal boundary resistance in semiconductors by non-equilibrium thermodynamics

  • Dettori, Riccardo|||0000-0002-4678-1098
  • Melis, Claudio|||0000-0002-5768-8403
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Colombo, Luciano|||0000-0001-5335-4652
We critically address the problem of predicting the thermal boundary resistance at the interface between two semiconductors by atomistic simulations. After reviewing the available models, lattice dynamics calculations and molecular dynamics simulation protocols, we reformulate this problem in the language of non-equilibrium thermodynamics, providing an elegant, robust and valuable theoretical framework for the direct calculation of the thermal boundary resistance through molecular dynamics simulations. The foundation of the method, as well as its subtleties and the details of its actual implementation are presented. Finally, the Si/Ge interface showcase is discussed as the prototypical example of semiconductor heterojunction whose thermal properties are paramount in many front-edge nanotechnologies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Heat transport through a solid-solid junction, The interface as an autonomous thermodynamic system

  • Rurali, Riccardo|||0000-0002-4086-4191
  • Colombo, Luciano|||0000-0001-5335-4652
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Øivind, Wilhelmsen
  • Trinh, Thuat T.
  • Bedeaux, Dick
  • Kjelstrup, Signe
We perform computational experiments using nonequilibrium molecular dynamics simulations, showing that the interface between two solid materials can be described as an autonomous thermodynamic system. We verify the local equilibrium and give support to the Gibbs description of the interface also away from the global equilibrium. In doing so, we reconcile the common formulation of the thermal boundary resistance as the ratio between the temperature discontinuity at the interface and the heat flux with a more rigorous derivation from nonequilibrium thermodynamics. We also show that thermal boundary resistance of a junction between two pure solid materials can be regarded as an interface property, depending solely on the interface temperature, as implicitly assumed in some widely used continuum models, such as the acoustic mismatch model. Thermal rectification can be understood on the basis of different interface temperatures for the two flow directions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Physical model of the contact resistivity of metal-graphene junctions

  • Chaves Romero, Ferney Alveiro|||0000-0001-9506-4485
  • Jiménez, David|||0000-0002-8148-198X
  • Cummings, Aron|||0000-0003-2307-497X
  • Roche, Stephan|||0000-0003-0323-4665
While graphene-based technology shows great promise for a variety of electronic applications, including radio-frequency devices, the resistance of the metal-graphene contact is a technological bottleneck for the realization of viable graphene electronics. One of the most important factors in determining the resistance of a metal-graphene junction is the contact resistivity. Despite the large number of experimental works that exist in the literature measuring the contact resistivity, a simple model of it is still lacking. In this paper, we present a comprehensive physical model for the contact resistivity of these junctions, based on the Bardeen Transfer Hamiltonian method. This model unveils the role played by different electrical and physical parameters in determining the specific contact resistivity, such as the chemical potential of interaction, the work metal-graphene function difference, and the insulator thickness between the metal and graphene. In addition, our model reveals that the contact resistivity is strongly dependent on the bias voltage across the metal-graphene junction. This model is applicable to a wide variety of graphene-based electronic devices and thus is useful for understanding how to optimize the contact resistance in these systems.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal rectification in silicon by a graded distribution of defects

  • Dettori, Riccardo|||0000-0002-4678-1098
  • Melis, Claudio|||0000-0002-5768-8403
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Colombo, Luciano|||0000-0001-5335-4652
We discuss about computer experiments based on nonequilibrium molecular dynamics simulations providing evidence that thermal rectification can be obtained in bulk Si by a non-uniform distribution of defects. We consider a graded population of both Ge substitutional defects and nanovoids, distributed along the direction of an applied thermal bias, and predict a rectification factor comparable to what is observed in other low-dimensional Si-based nanostructures. By considering several defect distribution profiles, thermal bias conditions, and sample sizes, the present results suggest that a possible way for tuning the thermal rectification is by defect engineering.