Skip to main content

SIMULACIONES ATOMISTICAS DE PRIMEROS PRINCIPIOS: METODOLOGIA Y APLICACIONES EN NANOCIENCIA

FIS2012-37549-C05-02

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2012
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Secretaría de Estado de Investigación, Desarrollo e Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal transport in porous Si nanowires from approach-to-equilibrium molecular dynamics calculations

  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Dettori, Riccardo|||0000-0002-4678-1098
  • Melis, Claudio|||0000-0002-5768-8403
  • Colombo, Luciano|||0000-0001-5335-4652
  • Rurali, Riccardo|||0000-0002-4086-4191
We study thermal transport in porous Si nanowires (SiNWs) by means of approach-to-equilibrium molecular dynamics simulations. We show that the presence of pores greatly reduces the thermal conductivity, κ, of the SiNWs as long mean free path phonons are suppressed. We address explicitly the dependence of κ on different features of the pore topology-such as the porosity and the pore diameter-and on the nanowire (NW) geometry-diameter and length. We use the results of the molecular dynamics calculations to tune an effective model, which is capable of capturing the dependence of κ on porosity and NW diameter. The model illustrates the failure of Matthiessen's rule to describe the coupling between boundary and pore scattering, which we account for by the inclusion of an additional empirical term.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Scaling properties of polycrystalline graphene, A review

  • Isacsson, Andreas
  • Cummings, Aron|||0000-0003-2307-497X
  • Colombo, Luciano|||0000-0001-5335-4652
  • Colombo, Luigi|||0000-0002-9048-3565
  • Kinaret, Jari M.
  • Roche, Stephan|||0000-0003-0323-4665
We present an overview of the electrical, mechanical, and thermal properties of polycrystalline graphene. Most global properties of this material, such as the charge mobility, thermal conductivity, or Young's modulus, are sensitive to its microstructure, for instance the grain size and the presence of line or point defects. Both the local and global features of polycrystalline graphene have been investigated by a variety of simulations and experimental measurements. In this review, we summarize the properties of polycrystalline graphene, and by establishing a perspective on how the microstructure impacts its large-scale physical properties, we aim to provide guidance for further optimization and improvement of applications based on this material, such as flexible and wearable electronics, and high-frequency or spintronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal boundary resistance in semiconductors by non-equilibrium thermodynamics

  • Dettori, Riccardo|||0000-0002-4678-1098
  • Melis, Claudio|||0000-0002-5768-8403
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Colombo, Luciano|||0000-0001-5335-4652
We critically address the problem of predicting the thermal boundary resistance at the interface between two semiconductors by atomistic simulations. After reviewing the available models, lattice dynamics calculations and molecular dynamics simulation protocols, we reformulate this problem in the language of non-equilibrium thermodynamics, providing an elegant, robust and valuable theoretical framework for the direct calculation of the thermal boundary resistance through molecular dynamics simulations. The foundation of the method, as well as its subtleties and the details of its actual implementation are presented. Finally, the Si/Ge interface showcase is discussed as the prototypical example of semiconductor heterojunction whose thermal properties are paramount in many front-edge nanotechnologies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Early events in the photochemistry of 5-diazo Meldrum's acid, Formation of a product manifold in C-N bound and pre-dissociated intersection seam regions

  • Li, Huijing
  • Migani, Annapaola|||0000-0001-5422-805X
  • Blancafort, Lluís|||0000-0002-0003-5540
  • Li, Quansong
  • Li, Zesheng
5-Diazo Meldrum's acid (DMA) undergoes a photo-induced Wolff rearrangement (WR). Recent gas-phase experiments have identified three photochemical products formed in a sub-ps scale after irradiation, a carbene formed after nitrogen loss, a ketene formed after WR and a second carbene formed after nitrogen and CO elimination (A. Steinbacher, et al. Phys. Chem. Chem. Phys., 2014, 16, 7290-7298). In this work, ground- and excited-state potential energy surfaces (PESs) have been investigated at the MS-CASPT2// CASSCF level. The key element of the PESs is an extended S0/S1 conical intersection seam along the C-N dissociation coordinate. The C-N predissociated region of the seam is accessed after excitation to the bright S2 state, and decay paths from the seam to the three primary products have been characterized. For the ketene and carbene II products, we show two possible formation pathways, a direct and a stepwise one, which suggests that these products may be formed in a bi-modal fashion. We have also characterized two possible mechanisms for triplet formation, one occurring before C-N dissociation involving a (S1/T2/T1) crossing region, and another one through the carbene. In contrast, excitation to S1 leads to a C-N bound region of the seam from where DMA regeneration or diazirine formation is possible, with a preference for the first case. The results are in good agreement with experimental data. Together with our previous work on diazonaphthoquinone, they show the importance of an extended seam in the photochemistry of a-diazoketones.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Heat transport through a solid-solid junction, The interface as an autonomous thermodynamic system

  • Rurali, Riccardo|||0000-0002-4086-4191
  • Colombo, Luciano|||0000-0001-5335-4652
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Øivind, Wilhelmsen
  • Trinh, Thuat T.
  • Bedeaux, Dick
  • Kjelstrup, Signe
We perform computational experiments using nonequilibrium molecular dynamics simulations, showing that the interface between two solid materials can be described as an autonomous thermodynamic system. We verify the local equilibrium and give support to the Gibbs description of the interface also away from the global equilibrium. In doing so, we reconcile the common formulation of the thermal boundary resistance as the ratio between the temperature discontinuity at the interface and the heat flux with a more rigorous derivation from nonequilibrium thermodynamics. We also show that thermal boundary resistance of a junction between two pure solid materials can be regarded as an interface property, depending solely on the interface temperature, as implicitly assumed in some widely used continuum models, such as the acoustic mismatch model. Thermal rectification can be understood on the basis of different interface temperatures for the two flow directions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Momentum dependence of spin-orbit interaction effects in single-layer and multi-layer transition metal dichalcogenides

  • Roldan, Rafael|||0000-0002-9316-464X
  • López Sancho, M. Pilar
  • Guinea, Francisco|||0000-0001-5915-5427
  • Cappelluti, Emmanuele
  • Silva-Guillén, Jose Angel|||0000-0002-0483-5334
  • Ordejon, Pablo|||0000-0002-2353-2793
One of the main characteristics of the new family of two-dimensional crystals of semiconducting transition metal dichalcogenides (TMDs) is the strong spin-orbit interaction, which makes them very promising for future applications in spintronics and valleytronics devices. Here we present a detailed study of the effect of spin-orbit coupling (SOC) on the band structure of single-layer and bulk TMDs, including explicitly the role of the chalcogen orbitals and their hybridization with the transition metal atoms. To this aim, we combine density functional theory (DFT) calculations with a Slater-Koster tight-binding (TB) model. Whereas most of the previous TB models have been restricted to the K and K' points of the Brillouin zone (BZ), here we consider the effect of SOC in the whole BZ, and the results are compared to the band structure obtained by DFT methods. The TB model is used to analyze the effect of SOC in the band structure, considering separately the contributions from the transition metal and the chalcogen atoms. Finally, we present a scenario where, in the case of strong SOC, the spin/orbital/valley entanglement at the minimum of the conduction band at Q can be probed and be of experimental interest in the most common cases of electron-doping reported for this family of compounds.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Coverage dependence of the level alignment for methanol on TiO2(110)

  • Migani, Annapaola|||0000-0001-5422-805X
  • Mowbray, Duncan J.|||0000-0002-8520-0364
Electronic level alignment at the interface between an adsorbed molecular layer and a semiconducting substrate determines the activity and efficiency of many photocatalytic materials. We perform calculations to determine the coverage dependence of the level alignment for a prototypical photocatalytic interface: 12 and 1 monolayer (ML) intact and dissociated CHOH on rutile TiO(110). We find changes in the wavefunction's spatial distribution, and a consequent renormalization of the quasiparticle energy levels, as a function of CHOH coverage and dissociation. Our results suggest that the occupied molecular levels responsible for hole trapping are not those observed in the ultraviolet photoemission spectroscopy (UPS) spectrum. Rather, they are those of isolated CHO on the surface. We find the unoccupied molecular levels have either 2D character with weight above the surface at 1 ML coverage, or significant hybridization with the surface at 12 ML coverage. These results suggest the resonance observed in the two photon phooemission (2PP) spectrum arises from excitations to unoccupied "Wet electron" levels with 2D character.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Quasiparticle level alignment for photocatalytic interfaces

  • Migani, Annapaola|||0000-0001-5422-805X
  • Mowbray, Duncan J.|||0000-0002-8520-0364
  • Zhao, Jin
  • Petek, Hrvoje
  • Rubio, Ángel|||0000-0003-2060-3151
Electronic level alignment at the interface between an adsorbed molecular layer and a semiconducting substrate determines the activity and efficiency of many photocatalytic materials. Standard density functional theory (DFT)-based methods have proven unable to provide a quantitative description of this level alignment. This requires a proper treatment of the anisotropic screening, necessitating the use of quasiparticle (QP) techniques. However, the computational complexity of QP algorithms has meant a quantitative description of interfacial levels has remained elusive. We provide a systematic study of a prototypical interface, bare and methanol-covered rutile TiO(110) surfaces, to determine the type of many-body theory required to obtain an accurate description of the level alignment. This is accomplished via a direct comparison with metastable impact electron spectroscopy (MIES), ultraviolet photoelectron spectroscopy (UPS), and two-photon photoemission (2PP) spectroscopy. We consider GGA DFT, hybrid DFT, and GW, scQPGW1, scQPGW, and scQPGW QP calculations. Our results demonstrate that GW, or our recently introduced scQPGW1 approach, are required to obtain the correct alignment of both the highest occupied and lowest unoccupied interfacial molecular levels (HOMO/LUMO). These calculations set a new standard in the interpretation of electronic structure probe experiments of complex organic molecule/semiconductor interfaces.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Quasiparticle interfacial level alignment of highly hybridized frontier levels, H2O on TiO2(110)

  • Migani, Annapaola|||0000-0001-5422-805X
  • Mowbray, Duncan J.|||0000-0002-8520-0364
  • Zhao, Jin
  • Petek, Hrvoje
Knowledge of the frontier levels' alignment prior to photoirradiation is necessary to achieve a complete quantitative description of HO photocatalysis on TiO(110). Although HO on rutile TiO(110) has been thoroughly studied both experimentally and theoretically, a quantitative value for the energy of the highest HO occupied levels is still lacking. For experiment, this is due to the HO levels being obscured by hybridization with TiO(110) levels in the difference spectra obtained via ultraviolet photoemission spectroscopy (UPS). For theory, this is due to inherent difficulties in properly describing many-body effects at the HO-TiO(110) interface. Using the projected density of states (DOS) from state-of-the-art quasiparticle (QP) GW, we disentangle the adsorbate and surface contributions to the complex UPS spectra of HO on TiO(110). We perform this separation as a function of HO coverage and dissociation on stoichiometric and reduced surfaces. Due to hybridization with the TiO(110) surface, the HO 3a and 1b levels are broadened into several peaks between 5 and 1 eV below the TiO(110) valence band maximum (VBM). These peaks have both intermolecular and interfacial bonding and antibonding character. We find the highest occupied levels of HO adsorbed intact and dissociated on stoichiometric TiO(110) are 1.1 and 0.9 eV below the VBM. We also find a similar energy of 1.1 eV for the highest occupied levels of HO when adsorbed dissociatively on a bridging O vacancy of the reduced surface. In both cases, these energies are significantly higher (by 0.6 to 2.6 eV) than those estimated from UPS difference spectra, which are inconclusive in this energy region. Finally, we apply self-consistent QPGW (scQPGW1) to obtain the ionization potential of the HO-TiO(110) interface.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electronic properties of single-layer and multilayer transition metal dichalcogenides MX₂ (M = Mo, W and X = S, Se)

  • Roldan, Rafael|||0000-0002-9316-464X
  • Silva-Guillén, Jose Angel|||0000-0002-0483-5334
  • López-Sancho, M. Pilar|||0000-0002-7603-5811
  • Guinea, Francisco|||0000-0001-5915-5427
  • Cappelluti, Emmanuele
  • Ordejon, Pablo|||0000-0002-2353-2793
Single- and few-layer transition metal dichalcogenides have recently emerged as a new family of layered crystals with great interest, not only from the fundamental point of view, but also because of their potential application in ultrathin devices. Here the electronic properties of semiconducting MX, where M = Mo or W and X = S or Se, are reviewed. Based on of density functional theory calculations, which include the effect of spin-orbit interaction, the band structure of single-layer, bilayer and bulk compounds is discussed. The band structure of these compounds is highly sensitive to elastic deformations, and it is reviewed how strain engineering can be used to manipulate and tune the electronic and optical properties of those materials. Further, the effect of disorder and imperfections in the lattice structure and their effect on the optical and transport properties of MX is discussed. The superconducting transition in these compounds, which has been observed experimentally, is analyzed, as well as the different mechanisms proposed so far to explain the pairing. Finally, a discussion on the excitonic effects which are present in these systems is included.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tunneling and electronic structure of the two-gap superconductor MgB2

  • Silva-Guillén, Jose Angel|||0000-0002-0483-5334
  • Noat, Y.
  • Cren, T.
  • Sacks, W.
  • Canadell Casanova, Enric|||0000-0002-4663-5226
  • Ordejon, Pablo|||0000-0002-2353-2793
A combined experimental (superconductor-insulator-superconductor tunneling spectra) and theoretical (density functional theory) study of the two-gap superconductor MgB2 is reported. The calculations confirm that the small gap is associated with a π band mostly based on the boron pz orbitals leading to the three-dimensional band component of the Fermi surface. This channel almost completely dominates the tunneling images and spectra for c-axis-oriented samples and not the two-dimensional σ band. The origin of this effect is due to the faster decay of the electronic states associated with the boron px and py orbitals compared to those associated with the boron pz orbitals, together with the symmetry properties of the wave functions. The calculated tunneling channels and partial density of states for each band agree with the values deduced from precise fits of experimental tunneling spectra. The present approach provides a framework for the understanding of tunneling spectra and the nature of superconducting gaps of other multigap superconductors.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Quasiparticle spectra of 2H-NbSe2, two-band superconductivity and the role of tunneling selectivity, Multigap superconductivity and tunneling selectivity of 2H-NbSe2 : theory and experiment

  • Noat, Y.
  • Silva-Guillén, Jose Angel|||0000-0002-0483-5334
  • Cren, T.
  • Cherkez, V.
  • Brun, C.
  • Pons, S.
  • Debontridder, F.
  • Roditchev, D.
  • Sacks, W.
  • Cario, L.
  • Ordejon, Pablo|||0000-0002-2353-2793
  • Garcia, Alberto|||0000-0001-5138-9579
  • Canadell Casanova, Enric|||0000-0002-4663-5226
We have studied the superconducting state of 2H-NbSe2 by scanning tunneling spectroscopy along two different crystal orientations, the c and the a/b axes. Along the c axis a large gap is dominant in the spectra, while a smaller gap is measured along the a/b axis. We show that these spectra are accurately described by the McMillan model where the small gap is induced through the coupling to the band associated with the large gap. In order to assign the small and large gaps to specific parts of the 2H-NbSe2 Fermi surface, the electronic structure was studied using first-principles calculations. While we cannot exclude the possibility of intrinsic anisotropy of the gaps, we propose that the large gap opens in the Fermi surface cylinders located around the corner K points while the sheets located around Γ are associated with the small gap. An additional component of the Fermi surface, a selenium based pocket, plays an essential role in the tunneling process. The role of the charge density wave occurring in this material is also discussed. Finally, we are able to give a coherent description of the observed characteristics of the tunneling spectra of 2H-NbSe2 as well as the differences with 2H-NbS2 where no charge density wave state is present. Further experimental work, such as high-resolution ARPES, would be very useful to confirm our interpretation. The approach and modeling developed here could also be relevant for other compounds of the dichalcogenide family.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Preclinical evaluation of antigen-specific nanotherapy based on phosphatidylserine-liposomes for type 1 diabetes

  • Villalba Felipe, Adrián|||0000-0003-3148-5453
  • Rodríguez-Fernández, Silvia|||0000-0001-8429-4293
  • Ampudia Carrasco, Rosa María|||0000-0002-0734-0433
  • Cano-Sarabia, Mary|||0000-0003-4254-8157
  • Perna-Barrull, David|||0000-0003-2079-818X
  • Bertran-Cobo, Cesc|||0000-0001-9286-9595
  • Ehrenberg, Clara
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Vives Pi, Marta|||0000-0003-3735-0779
Type 1 diabetes (T1D) is an autoimmune disease caused by the destruction of insulin-producing cells. Due to the ability of apoptotic cells clearance to induce tolerance, we previously generated liposomes rich in phophatidylserine (PS) -a feature of apoptotic cells- loaded with insulin peptides to mimic apoptotic beta-cells. PS-liposomes arrested autoimmunity in experimental T1D through the induction of tolerance. The aim of this study was to investigate the potential of several peptides from different T1D autoantigens encapsulated in (PS)-liposomes for T1D prevention and to assess its safety. T1D autoantigens (Insulin, C-peptide, GAD65 and IA2) were encapsulated in PS-liposomes. Liposomes were administered to the 'gold-standard' model for the study of autoimmune T1D, the Non-Obese Diabetic mouse, that spontaneously develop the disease. Safety and toxicity of liposomes were also determined. Only PS-liposomes encapsulating insulin peptides decrease T1D incidence in the Non-Obese Diabetic mouse model. Disease prevention correlates with a decrease in the severity of the autoimmune islet destruction driven by leukocytes. PS-liposomes neither showed toxic effect nor secondary complications. Among the here referred autoantigens, insulin peptides are the best candidates to be encapsulated in liposomes, like an artificial apoptotic cell, for the arrest of autoimmunity in T1D in a safe manner.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal rectification in silicon by a graded distribution of defects

  • Dettori, Riccardo|||0000-0002-4678-1098
  • Melis, Claudio|||0000-0002-5768-8403
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Colombo, Luciano|||0000-0001-5335-4652
We discuss about computer experiments based on nonequilibrium molecular dynamics simulations providing evidence that thermal rectification can be obtained in bulk Si by a non-uniform distribution of defects. We consider a graded population of both Ge substitutional defects and nanovoids, distributed along the direction of an applied thermal bias, and predict a rectification factor comparable to what is observed in other low-dimensional Si-based nanostructures. By considering several defect distribution profiles, thermal bias conditions, and sample sizes, the present results suggest that a possible way for tuning the thermal rectification is by defect engineering.