Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Orbital magneto-optical response of periodic insulators from first principles

  • Lebedeva, Irina V.
  • Strubbe, David A.
  • Tokatly, Ilya
  • Rubio Secades, Angel
Magneto-optical response, i.e. optical response in the presence of a magnetic field, is commonly used for characterization of materials and in optical communications. However, quantum mechanical description of electric and magnetic fields in crystals is not straightforward as the position operator is ill defined. We present a reformulation of the density matrix perturbation theory for time-dependent electromagnetic fields under periodic boundary conditions, which allows us to treat the orbital magneto-optical response of solids at the ab initio level. The efficiency of the computational scheme proposed is comparable to standard linear-response calculations of absorption spectra and the results of tests for molecules and solids agree with the available experimental data. A clear signature of the valley Zeeman effect is revealed in the continuum magneto-optical spectrum of a single layer of hexagonal boron nitride. The present formalism opens the path towards the study of magneto-optical effects in strongly driven low-dimensional systems., We acknowledge the financial support from the European Research Council (ERC2015-AdG-694097), Grupos Consolidados (IT578-13), European Union's H2020 program under GA no. 646259 (MOSTOPHOS) and no. 676580 (NOMAD) and Spanish Ministry (MINECO) Grant no. FIS2016-79464-P.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Real-Time Propagation TDDFT and Density Analysis for Exciton Coupling Calculations in Large Systems

  • Jornet Somoza, Joaquim
  • Lebedeva, Irina V.
Photoactive systems are characterized by their capacity to absorb the energy of light and transform it. Usually, more than one chromophore is involved in the light absorption and excitation transport processes in complex systems. Linear-Response Time-Dependent Density Functional (LR-TDDFT) is commonly used to identify excitation energies and transition properties by solving the well-known Casida's equation for single molecules. However, in practice, LR-TDDFT presents some disadvantages when dealing with multichromophore systems due to the increasing size of the electron hole pairwise basis required for accurate evaluation of the this work, we extend our local density decomposition method that enables us to disentangle individual contributions into the absorption spectrum to computation of exciton dynamic properties, such as exciton coupling parameters. We derive an analytical expression for the transition density from Real-Time Propagation TDDFT (P-TDDFT) based on Linear Response theorems. We demonstrate the validity of our method to determine transition dipole moments, transition densities, and exciton coupling for systems of increasing complexity. We start from the isolated benzaldehyde molecule, perform a distance analysis for pi-stacked dimers, and finally map the exciton coupling for a 14 benzaldehyde cluster., J.J.-S. and I.L. are grateful for the European Research Council (ERC-2010-AdG-267374), Spanish Grant FIS2016-79464-P, and Grupos Consolidados (IT578-13) and EU-H2020 project "MOSTOPHOS" (n. 646259) for financial support. J.J.-S. is grateful for the Spanish Grant IJCI-2014-22204 and H2020-EINFRA-5-2015 project "NOMAD" (n. 676580) and the funding from the European Union Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement No. 795246-StrongLights. The authors gratefully thank Prof. Angel Rubio for his comments and support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparison of performance of van der Waals-corrected exchange-correlation functionals for interlayer interaction in graphene and hexagonal boron nitride

  • Lebedeva, Irina
  • Lebedev, Alexander V.
  • Popov, Andrey M.
  • Knizhnik, Andrey A.
Exchange-correlation functionals with corrections for van der Waals interactions (PBE-D2, PBE-D3, PBE-D3(BJ), PBE-TS, optPBE-vdW and vdW-DF2) are tested for graphene and hexagonal boron nitride, both in the form of bulk and bilayer. The characteristics of the potential energy surface, such as the barrier to relative sliding of the layers and magnitude of corrugation, and physically measurable properties associated with relative in-plane and out-of-plane motion of the layers including the shear modulus and modulus for axial compression, shear mode frequency and frequency of out-of-plane vibrations are considered. The PBE-D3(BJ) functional gives the best results for the stackings of hexagonal boron nitride and graphite that are known to be ground-state from the experimental studies. However, it fails to describe the order of metastable states of boron nitride in energy. The PBE-D3 and vdW-DF2 functionals, which reproduce this order correctly, are identified as the optimal choice for general studies. The vdW-DF2 functional is preferred for evaluation of the modulus for axial compression and frequency of out-of-plane vibrations, while the PBE-D3 functional is somewhat more accurate in calculations of the shear modulus and shear mode frequency. The best description of the latter properties, however, is achieved also using the vdW-DF2 functional combined with consideration of the experimental interlayer distance. In the specific case of graphene, the PBE-D2 functional works very well and can be further improved by adjustment of the parameters., AL and AP acknowledge the Russian Foundation for Basic Research (Grant 16-52-00181). IL acknowledges the financial support from Grupos Consolidados UPV/EHU del Gobierno Vasco (IT578-13) and EU-H2020 project “MOSTOPHOS” (n. 646259)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Edge stacking dislocations in two-dimensional bilayers with a small lattice mismatch

  • Lebedeva, Irina
  • Knizhnik, Andrey A.
  • Popov, Andrey M.
Incomplete stacking dislocations are predicted to form at edges of the shorter upper layer in two-dimensional hexagonal bilayers upon stretching the longer bottom layer. A concept of the edge Burgers vector is introduced to describe such dislocations by analogy with the Burgers vector of standard bulk dislocations. Analytical solutions for the structure and energy of edge stacking dislocations in bilayer graphene are obtained depending on the magnitude of elongation and angles between the edge Burgers vector, direction of elongation and edge. The barrier for penetration of stacking dislocations inside the bilayer is estimated. The possibilities to measure the barrier to relative motion of graphene layers and strain of graphene on a substrate by observation of edge stacking dislocations are discussed., The authors acknowledge the Russian Foundation of Basic Research (14-02-00739-a). IL acknowledges the financial support from Grupos Consolidados UPV/EHU del Gobierno Vasco (IT578-13) and H2020-NMP-2014 project “MOSTOPHOS” (n. 646259)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient and accurate modeling of electron photoemission in nanostructures with TDDFT

  • Wopperer, Philipp
  • Giovannini, Umberto de
  • Rubio, Angel
We derive and extend the time-dependent surface-flux method introduced in [L. Tao, A. Scrinzi, New J. Phys. 14, 013021 (2012)] within a time-dependent density-functional theory (TDDFT) formalism and use it to calculate photoelectron spectra and angular distributions of atoms and molecules when excited by laser pulses. We present other, existing computational TDDFT methods that are suitable for the calculation of electron emission in compact spatial regions, and compare their results. We illustrate the performance of the new method by simulating strong-field ionization of C60 fullerene and discuss final state effects in the orbital reconstruction of planar organic molecules., We acknowledge financial support from the European Research Council (ERC-2010-AdG-267374), Spanish grant (FIS2013-46159-C3-1-P) and Grupos Consolidados (IT578-13). This work was partly supported by the European Union’s Horizon 2020 research and innovation program under grant agreement no. 676580 with the Novel Materials Discovery (NOMAD) laboratory, a European Center of Excellence, H2020-NMP-2014 project MOSTOPHOS (GA no. 646259), and the COST Action MP1306 (EUSpec)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formation of nickel clusters wrapped in carbon cages: Toward new endohedral metallofullerene synthesis

  • Sinitsa, Alexander S.
  • Chamberlain, Thomas W.
  • Zoberbier, Thilo
  • Lebedeva, Irina
  • Popov, Andrey M.
  • Knizhnik, Andrey A.
  • McSweeney, Robert L.
  • Biskupek, Johannes
  • Kaiser, Ute
  • Khlobystov, Andrei N.
Despite the high potential of endohedral metallofullerenes (EMFs) for application in biology, medicine and molecular electronics, and recent efforts in EMF synthesis, the variety of EMFs accessible by conventional synthetic methods remains limited and does not include, for example, EMFs of late transition metals. We propose a method in which EMF formation is initiated by electron irradiation in aberration-corrected high-resolution transmission electron spectroscopy (AC-HRTEM) of a metal cluster surrounded by amorphous carbon inside a carbon nanotube serving as a nanoreactor and apply this method for synthesis of nickel EMFs. The use of AC-HRTEM makes it possible not only to synthesize new, previously unattainable nanoobjects but also to study in situ the mechanism of structural transformations. Molecular dynamics simulations using the state-of-the-art approach for modeling the effect of electron irradiation are performed to rationalize the experimental observations and to link the observed processes with conditions of bulk EMF synthesis., A.S.S., I.V.L., A.A.K., and A.M.P. acknowledge the Russian Foundation of Basic Research (14-02-00739-a). I.V.L. acknowledges the financial support from Grupos Consolidados UPV/EHU del Gobierno Vasco (IT578-13) and EU-H2020 project “MOSTOPHOS” (no. 646259). A.N.K., T.W.C., and R.L.M. acknowledge the ERC and EPSRC for financial support, and the Nanoscale & Microscale Research Centre (nmRC). T.Z., J.B., and U.K. gratefully acknowledge the funding by the DFG (German Research Foundation) and the Ministry of Science, Research and the Arts (MWK) of Baden Wuerttemberg in the framework of the SALVE (Sub Angstrom Low-Voltage Electron Microscopy) project., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

h-AlN-Mg(OH)2 van der Waals bilayer heterostructure: Tuning the excitonic characteristics

  • Bacaksiz, C.
  • Dominguez, Adriel
  • Rubio, Angel
  • Senger, R. T.
  • Sahin, Hasan
Motivated by recent studies that reported the successful synthesis of monolayer Mg (OH)2 [Suslu et al., Sci. Rep. 6, 20525 (2016)] and hexagonal (h−)AlN [Tsipas et al., Appl. Phys. Lett. 103, 251605 (2013)], we investigate structural, electronic, and optical properties of vertically stacked h-AlN and Mg(OH)2, through ab initio density-functional theory (DFT), many-body quasiparticle calculations within the GW approximation and the Bethe-Salpeter equation (BSE). It is obtained that the bilayer heterostructure prefers the AB′ stacking having direct band gap at the Γ with Type-II band alignment in which the valance band maximum and conduction band minimum originate from different layer. Regarding the optical properties, the imaginary part of the dielectric function of the individual layers and heterobilayer are investigated. The heterobilayer possesses excitonic peaks, which appear only after the construction of the heterobilayer. The lowest three exciton peaks are analyzed in detail by means of band decomposed charge density and the oscillator strength. Furthermore, the wave function calculation shows that the first peak of the heterobilayer originates from spatially indirect exciton where the electron and hole localized at h-AlN and Mg(OH)2, respectively, which is important for the light harvesting applications., C.B. and R.T.S. acknowledge the support from TUBITAK Project No. 114F397. H.S. acknowledges support from Bilim Akademisi—The Science Academy, Turkey, under the BAGEP program. H.S. acknowledges financial support from the Scientific and Technological Research Council of Turkey (TUBITAK) under Project No. 116C073. A.R. and A.D. acknowledge financial support from the European Research Council (Grant No. ERC-2015-AdG694097), Spanish Grant No. FIS2013-46159-C3-1-P, Grupos Consolidados (Grant No. IT578-13), and AFOSR Grants No. FA2386-15-1-0006 AOARD 144088, No. H2020-NMP-2014, Project MOSTOPHOS (Grant No. 646259), and COST Action Grant No. MP1306 (EUSpec)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Stacking in incommensurate graphene/hexagonal-boron-nitride heterostructures based on ab initio study of interlayer interaction

  • Lebedev, Alexander V.
  • Lebedeva, Irina
  • Popov, Andrey M.
  • Knizhnik, Andrey A.
The interlayer interaction in graphene/boron-nitride heterostructures is studied using density functional theory calculations with the correction for van der Waals interactions. It is shown that the use of the experimental interlayer distance allows one to describe the potential energy surface at the level of more accurate but expensive computational methods. On the other hand, it is also demonstrated that the dependence of the interlayer interaction energy on the relative in-plane position of the layers can be fitted with high accuracy by a simple expression determined by the system symmetry. The use of only two independent parameters in such an approximation suggests that various physical properties of flat graphene/boron-nitride systems are interrelated and can be expressed through these two parameters. Here we estimate some of the corresponding physical properties that can be accessed experimentally, including the correction to the period of the moiré superstructure for the highly incommensurate ground state of the graphene/boron-nitride bilayer coming from the interlayer interaction, the width of stacking dislocations in slightly incommensurate systems of boron nitride on stretched graphene, and shear mode frequencies for commensurate graphene/boron-nitride systems, such as a flake on a layer. We propose that the commensurate-incommensurate phase transition can be observed in boron nitride on stretched graphene and that experimental measurements of the corresponding critical strain can be also used to gain insight into graphene/boron-nitride interactions., A.V.L. and A.M.P. acknowledge the Russian Foundation of Basic Research (Grant No. 16-52-00181) and computational time on the Multipurpose Computing Complex NRC “Kurchatov Institute”. I.V.L. acknowledges financial support from Grupos Consolidados UPV/EHU del Gobierno Vasco (Grant No. IT578-13) and H2020-NMP-2014 Project “MOSTOPHOS” (No. 646259)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Transformation of amorphous carbon clusters to fullerenes

  • Sinitsa, Alexander S.
  • Lebedeva, Irina
  • Popov, Andrey M.
  • Knizhnik, Andrey A.
Transformation of amorphous carbon clusters into fullerenes under high temperature is studied using molecular dynamics simulations at microsecond times. On the basis of the analysis of both the structure and energy of the system, it is found that fullerene formation occurs in two stages. First, fast transformation of the initial amorphous structure into a hollow sp shell with a few chains attached occurs with a considerable decrease of the potential energy and the number of atoms belonging to chains and to the amorphous domain. Then insertion of the remaining carbon chains into the sp network takes place at the same time as the fullerene shell formation. Two types of defects remaining after the formation of the fullerene shell are revealed: seven-membered rings and single one-coordinated atoms. One of the fullerene structures obtained contains no defects at all, which demonstrates that defect-free carbon cages can be occasionally formed from amorphous precursors directly without defect healing. No structural changes are observed after the fullerene formation, suggesting that defect healing is a slow process in comparison with the fullerene shell formation. The schemes of the revealed reactions of chain atom insertion into the fullerene shell just before its completion are presented. The results of the performed simulations are summarized within the paradigm of fullerene formation due to self-organization of the carbon system., This research was supported by the Russian Foundation of Basic Research (Grant 14-02-00739-a). I.V.L. acknowledges Grupos Consolidados del Gobierno Vasco (Grant IT-578-13) and EU-H2020 Project “MOSTOPHOS” (No. 646259)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Application of the real-time time-dependent density functional theory to excited-state dynamics of molecules and 2D materials

  • Miyamoto, Yoshiyuki
  • Rubio, Angel
We review our recent developments in the ab initio simulation of excited-state dynamics within the framework of time-dependent density functional theory (TDDFT). Our targets range from molecules to 2D materials, although the methods are general and can be applied to any other finite and periodic systems. We discuss examples of excited-state dynamics obtained by real-time TDDFT coupled with molecular dynamics (MD) and the Ehrenfest approximation, including photoisomerization in molecules, photoenhancement of the weak interatomic attraction of noble gas atoms, photoenhancement of the weak interlayer interaction of 2D materials, pulse-laser-induced local bond breaking of adsorbed atoms on 2D sheets, modulation of UV light intensity by graphene nanoribbons at terahertz frequencies, and collision of high-speed ions with the 2D material to simulate the images taken by He ion microscopy. We illustrate how the real-time TDDFT approach is useful for predicting and understanding non-equilibrium dynamics in condensed matter. We also discuss recent developments that address the excited-state dynamics of systems out of equilibrium and future challenges in this fascinating field of research., YM acknowledges financial support from JSPS KAKENHI (Grant Numbers JP16H00925 and JP16K05049) and from a project supported by the New Energy and Industrial Technology Development Organization (NEDO). AR acknowledges financial support from the European Research Council (ERC-2015-AdG-694097), Grupos Consolidados (IT578-13) of the UPV=EHU and Basque Government, the European Union’s H2020 program under GA No. 676580 (NOMAD), MOSTOPHOS (GA No. 646259), and the JSPS Fellowship program in 2016., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Long triple carbon chains formation by heat treatment of graphene nanoribbon: Molecular dynamics study with revised Brenner potential

  • Sinitsa, Alexander S.
  • Lebedeva, Irina
  • Popov, Andrey M.
  • Knizhnik, Andrey A.
The method for production of atomic chains by heating of graphene nanoribbons (GNRs) is proposed and studied by molecular dynamics simulations. The Brenner potential is revised to adequately describe formation of atomic chains, edges and vacancy migration in graphene. A fundamentally different behaviour is observed for zigzag-edge GNRs with 3 and 4 atomic rows (3 and 4-ZGNRs) at 2500 K: formation of triple, double and single carbon chains with the length of hundreds of atoms in 3-ZGNRs and edge reconstruction with only short chains and GNR width reduction in 4-ZGNRs. The chain formation mechanism in 3-ZGNRs is revealed by analysis of bond reorganization reactions and is based on the interplay of two processes. The first one is breaking of bonds between 3 zigzag atomic rows leading to triple chain formation. The second one is bond breaking within the same zigzag atomic row, which occurs predominantly through generation of pentagons with subsequent bond breaking in pentagons and results in single or double chain formation. The DFT calculations of the barriers for relevant reactions are consistent with the mechanism proposed. The possibility of chain-based nanoelectronic devices with a controllable number of chains is discussed., ASS, AMP and AAK acknowledge the Russian Foundation for Basic Research, Russia (Grant 18-02-00985). IVL acknowledges Grupos Consolidados del Gobierno Vasco, Spain (IT-578-13) and EU-H2020 project "MOSTOPHOS" (n. 646259)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structure and energetics of carbon, hexagonal boron nitride, and carbon/hexagonal boron nitride single-layer and bilayer nanoscrolls

  • Siahlo, Andrei I.
  • Poklonski, Nikolai A.
  • Lebedev, Alexander V.
  • Lebedeva, Irina
  • Popov, Andrey M.
  • Vyrko, Sergey A.
  • Knizhnik, Andrey A.
  • Lozovik, Yurii E.
Single-layer and bilayer carbon and hexagonal boron nitride nanoscrolls as well as nanoscrolls made of bilayer graphene/hexagonal boron nitride heterostructure are considered. Structures of stable states of the corresponding nanoscrolls prepared by rolling single-layer and bilayer rectangular nanoribbons are obtained based on the analytical model and numerical calculations. The lengths of nanoribbons for which stable and energetically favorable nanoscrolls are possible are determined. Barriers to rolling of single-layer and bilayer nanoribbons into nanoscrolls and barriers to nanoscroll unrolling are calculated. Based on the calculated barriers nanoscroll lifetimes in the stable state are estimated. Elastic constants for bending of graphene and hexagonal boron nitride layers used in the model are found by density functional theory calculations., AL, AP, and YL acknowledge the Russian Foundation of Basic Research (16-52-00181). IL acknowledges the financial support from Grupos Consolidados UPV/EHU del Gobierno Vasco (IT578-13) and EU-H2020 project “MOSTOPHOS” (n. 646259). AS, NP, and SV acknowledge the Belarusian Republican Foundation for Fundamental Research (grant No. F16R107) and Belarusian National Research Program “Convergence”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Modelling of polymer-carbon nanotube heterojunctions for photovoltaic applications

  • Glanzmann, Livia N.
A thesis presented to the University of the Basque Country UPV/EHU in fulfilment of the thesis requirement for the degree of Doctor of Philosophy in Physics of Nanostructures and Advanced Materials., Semiconducting single-walled carbon nanotubes (s-SWNT) are promising materialsfor efficient organic photovoltaics (OPVs). Unfortunately, the implementation of s-SWNTs has so far not lead to the expected increase in power conversion efficienciesof OPVs. For this reason, we want to study the electronic processes within polymer-SWNT heterojunctions. Transient spectroscopy provides direct information aboutphotoexcitation processes in blends. We modelled the transient spectrum of apolymer:fullerene:s-SWNT blend using Linear Response. Based on our results, weare able to explain the structure transient spectra of s-SWNT systems and theelectronic dynamics linked to it. Further, we studied the internal quantum efficiencyof different donor/acceptor blends by carrying out calculations of the Landauer-Bütticker conductance of prototypical donor/acceptor heterojunctions. We find adependence of the conductivity on the level alignment. By improving the levelalignment of the polymer and SWNT through the use of larger band gap SWNTs,one may obtain a dramatic improvement in OPV efficiency. In summary, our resultsprovide a deeper insight into the photoexcitation and electronic processes ofpolymer-carbon nanotube heterojunctions and thus support the development of moreefficient polymer-SWNT OPVs., I acknowledge funding from from the European Projects POCAONTAS (FP7-PEOPLE-2012- ITN- 316633), DYNamo (ERC-2010-AdG-267374), MOSTOPHOS (SEP-210187476), and EUSpec (COST Action MP-1306), and CRONOS (280879-2 CRONOS CP-FP7); Spanish Grants (FIS2012-37549-C05-02, FIS2010-21282-C02-01, PIB2010US-00652, JCI-2010-08156); and Grupos Consolidados UPV/EHU del Gobierno Vasco (IT-578-13); and the computational time from the BSC Red Espagnola de Supercomputacion., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Real-Time propagation TDDFT and density analysis for exciton coupling calculations in large systems

  • Jornet-Somoza, Joaquim
  • Lebedeva, Irina
Photoactive systems are characterized by their capacity to absorb the energy of light and transform it. Usually, more than one chromophore is involved in the light absorption and excitation transport processes in complex systems. Linear-Response Time-Dependent Density Functional (LR-TDDFT) is commonly used to identify excitation energies and transition properties by solving the well-known Casida's equation for single molecules. However, in practice, LR-TDDFT presents some disadvantages when dealing with multichromophore systems due to the increasing size of the electron-hole pairwise basis required for accurate evaluation of the absorption spectrum. In this work, we extend our local density decomposition method that enables us to disentangle individual contributions into the absorption spectrum to computation of exciton dynamic properties, such as exciton coupling parameters. We derive an analytical expression for the transition density from Real-Time Propagation TDDFT (P-TDDFT) based on Linear Response theorems. We demonstrate the validity of our method to determine transition dipole moments, transition densities, and exciton coupling for systems of increasing complexity. We start from the isolated benzaldehyde molecule, perform a distance analysis for π-stacked dimers, and finally map the exciton coupling for a 14 benzaldehyde cluster., J.J.-S. and I.L. are grateful for the European Research Council (ERC-2010-AdG-267374), Spanish Grant FIS2016-79464-P, and Grupos Consolidados (IT578-13) and EU-H2020 project “MOSTOPHOS” (n. 646259) for financial support. J.J.-S. is grateful for the Spanish Grant IJCI-2014-22204 and H2020- EINFRA-5-2015 project “NOMAD” (n. 676580) and the funding from the European Union Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement No. 795246-StrongLights.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Corrigendum to: ¿Comparison of performance of van der Waals-corrected exchange-correlation functionals for interlayer interaction in graphene and hexagonal boron nitride?

  • Lebedeva, Irina
  • Lebedev, Alexander V.
  • Popov, Andrey M.
  • Knizhnik, Andrey A.
Exchange-correlation functionals with corrections for van der Waals interactions (PBE-D2, PBE-D3, PBE-D3(BJ), PBE-TS, optPBE-vdW and vdW-DF2) are tested for graphene and hexagonal boron nitride, both inthe form of bulk and bilayer. The characteristics of the potential energy surface, such as the barrier to rel-ative sliding of the layers and magnitude of corrugation, and physically measurable properties associatedwith relative in-plane and out-of-plane motion of the layers including the shear modulus and modulusfor axial compression, shear mode frequency and frequency of out-of-plane vibrations are considered.The PBE-D3(BJ) functional gives the best results for the stackings of hexagonal boron nitride and graphitethat are known to be ground-state from the experimental studies. However, it fails to describe the orderof metastable states of boron nitride in energy. The PBE-D3 and vdW-DF2 functionals, which reproducethis order correctly, are identified as the optimal choice for general studies. The vdW-DF2 functional ispreferred for evaluation of the modulus for axial compression and frequency of out-of-plane vibrations,while the PBE-D3 functional is somewhat more accurate in calculations of the shear modulus and shearmode frequency. The best description of the latter properties, however, is achieved also using the vdW-DF2 functional combined with consideration of the experimental interlayer distance. In the specific caseof graphene, the PBE-D2 functional works very well and can be further improved by adjustment of theparameters., L and APacknowledge the Russian Foundation for Basic Research (Grant16-52-00181). IL acknowledges the financial support from GruposConsolidados UPV/EHU del Gobierno Vasco (IT578-13) and EU-H2020 project ‘‘MOSTOPHOS” (n. 646259).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Orbital magneto-optical response of periodic insulators from first principles

  • Lebedeva, Irina
  • Strubbe, David A.
  • Tokatly, Ilya
  • Rubio, Angel
Magneto-optical response, i.e. optical response in the presence of a magnetic field, is commonly used for characterization of materials and in optical communications. However, quantum mechanical description of electric and magnetic fields in crystals is not straightforward as the position operator is ill defined. We present a reformulation of the density matrix perturbation theory for time-dependent electromagnetic fields under periodic boundary conditions, which allows us to treat the orbital magneto-optical response of solids at the ab initio level. The efficiency of the computational scheme proposed is comparable to standard linear-response calculations of absorption spectra and the results of tests for molecules and solids agree with the available experimental data. A clear signature of the valley Zeeman effect is revealed in the continuum magneto-optical spectrum of a single layer of hexagonal boron nitride. The present formalism opens the path towards the study of magneto-optical effects in strongly driven low-dimensional systems., We acknowledge the financial support from the European Research Council (ERC-2015-AdG-694097), Grupos Consolidados (IT578-13), European Union’s H2020 program under GA no. 646259 (MOSTOPHOS) and no. 676580 (NOMAD) and Spanish Ministry (MINECO) Grant No. FIS2016-79464-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anisotropic electronic, mechanical, and optical properties of monolayer WTe2

  • Torun, E.
  • Sahin, Hasan
  • Cahangirov, Seymur
  • Rubio, Angel
  • Peeters, F. M.
Using first-principles calculations, we investigate the electronic, mechanical, and optical properties of monolayer WTe2. Atomic structure and ground state properties of monolayer WTe2 (Td phase) are anisotropic which are in contrast to similar monolayer crystals of transition metal dichalcogenides, such as MoS2, WS2, MoSe2, WSe2, and MoTe2, which crystallize in the H-phase. We find that the Poisson ratio and the in-plane stiffness is direction dependent due to the symmetry breaking induced by the dimerization of the W atoms along one of the lattice directions of the compound. Since the semimetallic behavior of the Td phase originates from this W-W interaction (along the a crystallographic direction), tensile strain along the dimer direction leads to a semimetal to semiconductor transition after 1% strain. By solving the Bethe-Salpeter equation on top of single shot G0W0 calculations, we predict that the absorption spectrum of Td-WTe2 monolayer is strongly direction dependent and tunable by tensile strain., This work was supported by the Flemish Science Foundation (FWO-Vl) and the Methusalem foundation of the Flemish government. Computational resources were provided by TUBITAK ULAKBIM, High Performance and Grid Computing Center (TR-Grid e-Infrastructure). H.S. was supported by a FWO Pegasus Long Marie Curie Fellowship. S.C. and A.R. acknowledge the financial support from the Marie Curie grant FP7-PEOPLE-2013-IEF Project No. 628876, European Research Council (ERC-2010-AdG-267374), Spanish grant (FIS2013-46159-C3-1-P), Grupos Consolidados (IT578-13), and AFOSR Grant No. FA2386-15-1-0006 AOARD 144088, H2020-NMP-2014 project MOSTOPHOS, GA No. SEP-210187476, and COST Action MP1306 (EUSpec). S.C. acknowledges the support from The Scientific and Technological Research Council of Turkey (TUBITAK) under Project No. 115F388., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Disentangling vacancy oxidation on metallicity-sorted carbon nanotubes

  • Mowbray, Duncan J.
  • Pérez Paz, Alejandro
  • Ruiz-Soria, Georgina
  • Sauer, Markus
  • Lacovig, Paolo
  • Dalmiglio, Matteo
  • Lizzit, Silvano
  • Yanagi, Kazuhiro
  • Goldoni, Andrea
  • Pichler, Thomas
  • Ayala, Paola
  • Rubio, Angel
arXiv:1608.01424v1, Pristine single-walled carbon nanotubes (SWCNTs) are rather inert to O2 and N2, which for low doses chemisorb only on defect sites or vacancies of the SWCNTs at the ppm level. However, very low doping has a major effect on the electronic properties and conductivity of the SWCNTs. Already at low O2 doses (80 L), the X-ray photoelectron spectroscopy (XPS) O 1s signal becomes saturated, indicating nearly all of the SWCNT’s vacancies have been oxidized. As a result, probing vacancy oxidation on SWCNTs via XPS yields spectra with rather low signal-to-noise ratios, even for metallicity-sorted SWCNTs. We show that, even under these conditions, the first-principles density functional theory calculated Kohn–Sham O 1s binding energies may be used to assign the XPS O 1s spectra for oxidized vacancies on SWCNTs into its individual components. This allows one to determine the specific functional groups or bonding environments measured. We find the XPS O 1s signal is mostly due to three O-containing functional groups on SWCNT vacancies: epoxy (C2>O), carbonyl (C2>C═O), and ketene (C═C═O), as ordered by abundance. Upon oxidation of nearly all of the SWCNT’s vacancies, the central peak’s intensity for the metallic SWCNT sample is 60% greater than that for the semiconducting SWCNT sample. This suggests a greater abundance of O-containing defect structures on the metallic SWCNT sample. For both metallic and semiconducting SWCNTs, we find O2 does not contribute to the measured XPS O 1s spectra., D.J.M. acknowledges funding through the Spanish “Juan de la Cierva” program (JCI-2010-08156). A.P.P. acknowledges funding through the Proyecto Diputación Foral de Gipuzkoa (Q4818001B), “Ayuda para la Especialización de Personal Investigador del Vicerrectorado de Investigación de la UPV/EHU-2013”, and the Spanish “Juan de la Cierva-incorporación” program (IJCI-2014-20147). P.A. was supported by a Marie Curie Intra European Fellowship within the seventh European Community Framework Programme. A.G. thanks the FIRB NANOSOLAR (RBAP11C58Y). We acknowledge funding by European Projects DYNamo (ERC-2015-AdG-694097), POCAONTAS (FP7-PEOPLE-2012-ITN-316633), MOSTOPHOS (GA no. 646259), and EUSpec (COST Action MP1306); Spanish Grants (FIS2013-46159-C3-1-P) and “Grupos Consolidados UPV/EHU del Gobierno” (IT-578-13); and the Air Force Office of Scientific Research (AFOSR) (FA2386-15-1-0006 AOARD 144088). This work was supported by the Austrian Science Fund through projects FWF P21333-N20, FWF P27769-N20, and FWF NanoBlends I 943-N19 and by EU Proposal no. 20105285 for ELETTRA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dislocations in stacking and commensurate-incommensurate phase transition in bilayer graphene and hexagonal boron nitride

  • Lebedeva, Irina
  • Lebedev, Alexander V.
  • Popov, Andrey M.
  • Knizhnik, Andrey A.
Dislocations corresponding to a change of stacking in two-dimensional hexagonal bilayers, graphene and boron nitride, and associated with boundaries between commensurate domains are investigated using the two-chain Frenkel-Kontorova model on top of ab initio calculations. Structural transformations of bilayers in which the bottom layer is stretched and the upper one is left to relax freely are considered for gradually increased elongation of the bottom layer. Formation energies of dislocations, dislocation width, and orientation of the boundary between commensurate domains are analyzed depending on the magnitude and direction of elongation. The second-order phase transition from the commensurate phase to the incommensurate one with multiple dislocations is predicted to take place at some critical elongation. The order parameter for this transition corresponds to the density of dislocations, which grows continuously upon increasing the elongation of the bottom layer above the critical value. In graphene and metastable boron nitride with the layers aligned in the same direction, where elementary dislocations are partial, this transition, however, is preceded by formation of the first dislocation at the elongation smaller than the critical one. The phase diagrams including this intermediate state are plotted in coordinates of the magnitude and direction of elongation of the bottom layer., The authors also acknowledge the Russian Foundation of Basic Research (Grant No. 14-02-00739-a) and computational time on the Supercomputing Center of Lomonosov Moscow State University and the Multipurpose Computing Complex NRC “Kurchatov Institute.” I.L. acknowledges the financial support from Grupos Consolidados UPV/EHU del Gobierno Vasco (Grant No. IT578-13) and H2020-NMP-2014 project “MOSTOPHOS” (Project No. 646259)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Negative plasmon dispersion in 2H-NbS2 beyond the charge-density-wave interpretation

  • Cudazzo, Pierluigi
  • Müller, Eric
  • Habenicht, Carsten
  • Gatti, Matteo
  • Berger, Helmuth
  • Knupfer, M.
  • Rubio, Angel
  • Huotari, Simo
We examine the experimental and theoretical electron-energy loss spectra in 2H-${\mathrm{Cu}}_{0.2}$NbS2 and find that the 1 eV plasmon in this material does not exhibit the regular positive quadratic plasmon dispersion that would be expected for a normal broad-parabolic-band system. Instead we find a nearly non-dispersing plasmon in the momentum-transfer range q < 0.35 Å−1. We argue that for a stoichiometric pure 2H-NbS2 the dispersion relation is expected to have a negative slope as is the case for other transition-metal dichalcogenides. The presence of Cu impurities, required to stabilize the crystal growth, tends to shift the negative plasmon dispersion into a positive one, but the doping level in the current system is small enough to result in a nearly-non-dispersing plasmon. We conclude that a negative-slope plasmon dispersion is not connected with the existence of a charge-density-wave order in transition metal dichalcogenides., SH was supported by the Academy of Finland (projects 1254065, 1283136, 1259526 and 1295696), MG by a Marie Curie FP7 Integration Grant within the 7th European Union Framework Programme, PC by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 660695. AR acknowledges financial support from the European Research Council(ERC-2010-AdG-267374), Spanish grant (FIS2013-46159-C3-1-P), Grupos Consolidados(IT578-13), and AFOSR Grant No. FA2386-15-1-0006 AOARD 144088, H2020-NMP-2014 project MOSTOPHOS, GA no. SEP-210187476 and COST Action MP1306 (EUSpec). Computational time was granted by GENCI(Project No. 544)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the exciton coupling between two chlorophyll pigments in the absence of a protein environment: Intrinsic effects revealed by theory and experiment

  • Milne, Bruce F.
  • Kjær, Christina
  • Houmøller, Jørgen
  • Stockett, Mark H.
  • Toker, Yoni
  • Rubio, Angel
  • Brøndsted Nielsen, Steen
Exciton coupling between two or more chlorophyll (Chl) pigments is a key mechanism associated with the color tuning of photosynthetic proteins but it is difficult to disentangle this effect from shifts that are due to the protein microenvironment. Herein, we report the formation of the simplest coupled system, the Chl a dimer, tagged with a quaternary ammonium ion by electrospray ionization. Based on action spectroscopic studies in vacuo, the dimer complexes were found to absorb 50–70 meV to the red of the monomers under the same conditions. First-principles calculations predict shifts that somewhat depend on the relative orientation of the two Chl units, namely 50 and 30 meV for structures where the Chl rings are stacked and unstacked, respectively. Our work demonstrates that Chl association alone can produce a large portion of the color shift observed in photosynthetic macromolecular assemblies., B.F.M. acknowledges funding from the Portuguese Foundation for Science and Technology (CONT_DOUT/11/UC/405/10150/18/2008) and thanks the DIPC and CFM (UPV/EHU) and the Laboratory for Advanced Computation (University of Coimbra) for support. S.B.N. acknowledges support from the Danish Council for Independent Research (4181-00048B) and the Villum Foundation. A.R. acknowledges financial support from the European Research Council (ERC-2010-AdG-267374), a Spanish grant (FIS2013-46159-C3-1-P), Grupos Consolidados (IT578-13), AFOSR (FA2386-15-1-0006), AOARD (144088), the H2020-NMP-2014 project MOSTOPHOS (SEP-210187476), and COST Action (MP1306, “EUSpec”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polyyne electronic and vibrational properties under environmental interactions

  • Wanko, Marius
  • Cahangirov, Seymur
  • Shi, Lei
  • Rohringer, Philip
  • Lapin, Zachary J.
  • Novotny, Lukas
  • Ayala, Paola
  • Pichler, Thomas
  • Rubio, Angel
Recently the novel system of linear carbon chains inside double-walled carbon nanotubes has extended the length of sp1 hybridized carbon chains from 44 to thousands of atoms [Shi et al., Nat. Mater. 15, 634 (2016)]. The optoelectronic properties of these ultralong chains are poorly described by current theoretical models, which are based on short chain experimental data and assume a constant environment. As such, a physical understanding of the system in terms of charge transfer and van der Waals interactions is widely missing. We provide a reference for the intrinsic Raman frequency of polyynes in vacuo and explicitly describe the interactions between polyynes and carbon nanotubes. We find that van der Waals interactions strongly shift this frequency, which has been neither expected nor described for other intramolecular C-C stretching vibrations. As a consequence of charge transfer from the tube to the chain, the Raman response of long chains is qualitatively different from the known phonon dispersion of polymers close to the Γ point. Based on these findings we show how to correctly interpret the Raman data, considering the nanotube's properties. This is essential for its use as an analytical tool to optimize the growth process for future applications., M.W. and A.R. acknowledge financial support by the European Research Council (ERC-2010-AdG-267374), Spanish MINECO (FIS2013-46159-C3-1-P), Grupos Consolidados (IT578-13), AFOSR Grant No. FA2386-15-1-0006 AOARD 144088, H2020-NMP-2014 project MOSTOPHOS (GA No. 646259), and COST Action MP1306 (EUSpec). Technical and human support provided by IZO-SGI (SGIker) of UPV/EHU. S.C. acknowledges financial support from the Marie Curie Grant FP7-PEOPLE-2013-IEF project ID 628876. T.P. acknowledges support from the Austrian Science Fund (FWF, NanoBlends I 943–N19). L.S. acknowledges the scholarship supported by the China Scholarship Council. Z.J.L. and L.N. acknowledge Swiss National Science Foundation (CR2212-152944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailored pump-probe transient spectroscopy with time-dependent density-functional theory: controlling absorption spectra

  • Walkenhorst, Jessica
  • Giovannini, Umberto de
  • Castro, Alberto
  • Rubio, Angel
Recent advances in laser technology allow us to follow electronic motion at its natural time-scale with ultra-fast time resolution, leading the way towards attosecond physics experiments of extreme precision. In this work, we assess the use of tailored pumps in order to enhance (or reduce) some given features of the probe absorption (for example, absorption in the visible range of otherwise transparent samples). This type of manipulation of the system response could be helpful for its full characterization, since it would allow us to visualize transitions that are dark when using unshaped pulses. In order to investigate these possibilities, we perform first a theoretical analysis of the non-equilibrium response function in this context, aided by one simple numerical model of the hydrogen atom. Then, we proceed to investigate the feasibility of using time-dependent density-functional theory as a means to implement, theoretically, this absorption-optimization idea, for more complex atoms or molecules. We conclude that the proposed idea could in principle be brought to the laboratory: tailored pump pulses can excite systems into light-absorbing states. However, we also highlight the severe numerical and theoretical difficulties posed by the problem: large-scale non-equilibrium quantum dynamics are cumbersome, even with TDDFT, and the shortcomings of state-of-the-art TDDFT functionals may still be serious for these out-of-equilibrium situations., We acknowledge financial support from the European Research Council (ERC-2010-AdG-267374), Spanish grants FIS2013-46159-C3-1-P and FIS2013-46159-2-P, Grupos Consolidados (IT578-13), and AFOSR Grant No. FA2386-15-1-0006 AOARD 144088, H2020-NMP2014 project MOSTOPHOS, GA no. SEP-210187476 and COST Action MP1306 (EUSpec). Computational time was granted by BSC Red Espanola de Supercomputacion., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical properties and exciton transfer between N-heterocyclic carbene iridium(III) complexes for blue light-emitting diode applications from first principles

  • Lebedeva, Irina
  • Jornet-Somoza, Joaquim
N-heterocyclic carbene (NHC) iridium(III) complexes are considered as promising candidates for blue emitters in organic light-emitting diodes. They can play the roles of the emitter as well as of electron and hole transporters in the same emission layer. We investigate optical transitions in such complexes with account of geometry and electronic structure changes upon excitation or charging and exciton transfer between the complexes from first principles. It is shown that excitation of NHC iridium complexes is accompanied by a large reorganization energy ∼0.7 eV and a significant loss in the oscillator strength, which should lead to low exciton diffusion. Calculations with account of spin–orbit coupling reveal a small singlet–triplet splitting ∼0.1 eV, whereas the oscillator strength for triplet excitations is found to be an order of magnitude smaller than for the singlet ones. The contributions of the Förster and Dexter mechanisms are analyzed via the explicit integration of transition densities. It is shown that for typical distances between emitter complexes in the emission layer, the contribution of the Dexter mechanism should be negligible compared to the Förster mechanism. At the same time, the ideal dipole approximation, although giving the correct order of the exciton coupling, fails to reproduce the result taking into account spatial distribution of the transition density. For charged NHC complexes, we find a number of optical transitions close to the emission peak of the blue emitter with high exciton transfer rates that can be responsible for exciton–polaron quenching. The nature of these transitions is analyzed., We thank the financial support from the EU-H2020 “MOSTOPHOS” (Grant No. 646259). J.J.-S. gratefully acknowledges the funding from the European Union Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement No. 795246-StrongLights., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

First-principles simulations of exciton transfer between N-heterocyclic carbene iridium (III) complexes in blue organic light-emitting diodes

  • Lebedeva, Irina
  • Jornet-Somoza, Joaquim
N-heterocyclic carbene (NHC) iridium (III) complexes are promising for the use as blue emitters in organic light-emitting diodes. Exciton transfer between such organometallic complexes is investigated using time-dependent density functional theory calculations. Casida's equation is solved to study absorption and emission of the neutral and charged complexes using the ORCA package. The Sternheimer equation implemented in the Octopus code is extended to take into account spin-orbit coupling and is applied to investigate triplet excitations. Real-time propagation as implemented in the Octopus code is used to simulate exciton dynamics in an emitter dimer and to extract the exciton coupling via explicit integration of transition densities., The version of the Octopus code used for the solution of the Sterhneimer equation with account of spin-orbit coupling is enclosed. The authors thank the financial support from the EU-H2020 project ``MOSTOPHOS" (n. 646259). JJS gratefully acknowledges the funding from the European Union Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement No. 795246-StrongLights., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Tailored pump-probe transient spectroscopy with time-dependent density-functional theory: controlling absorption spectra

  • Walkenhorst, J.
  • De Giovannini, U.
  • Castro, A.
  • Rubio, A.
Recent advances in laser technology allow us to follow electronic motion at its natural time-scale with ultra-fast time resolution, leading the way towards attosecond physics experiments of extreme precision. In this work, we assess the use of tailored pumps in order to enhance (or reduce) some given features of the probe absorption (for example, absorption in the visible range of otherwise transparent samples). This type of manipulation of the system response could be helpful for its full characterization, since it would allow us to visualize transitions that are dark when using unshaped pulses. In order to investigate these possibilities, we perform first a theoretical analysis of the non-equilibrium response function in this context, aided by one simple numerical model of the hydrogen atom. Then, we proceed to investigate the feasibility of using time-dependent density-functional theory as a means to implement, theoretically, this absorption-optimization idea, for more complex atoms or molecules. We conclude that the proposed idea could in principle be brought to the laboratory: tailored pump pulses can excite systems into light-absorbing states. However, we also highlight the severe numerical and theoretical difficulties posed by the problem: large-scale non-equilibrium quantum dynamics are cumbersome, even with TDDFT, and the shortcomings of state-of-the-art TDDFT functionals may still be serious for these out-of-equilibrium situations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

High-performance organic light-emitting diodes comprising ultrastable glass layers

  • Ràfols Ribé, Joan|||0000-0003-1256-149X
  • Will, Paul-Anton|||0000-0001-6753-7660
  • Hänisch, Christian|||0000-0003-1331-9507
  • Gonzalez-Silveira, Marta|||0000-0003-1510-5262
  • Lenk, Simone|||0000-0002-4539-8193
  • Rodríguez-Viejo, Javier|||0000-0002-9735-263X
  • Reineke, Sebastian|||0000-0002-4112-6991
Organic light-emitting diodes with ultrastable glass emission layers show increased efficiency and device stability. Organic light-emitting diodes (OLEDs) are one of the key solid-state light sources for various applications including small and large displays, automotive lighting, solid-state lighting, and signage. For any given commercial application, OLEDs need to perform at their best, which is judged by their device efficiency and operational stability. We present OLEDs that comprise functional layers fabricated as ultrastable glasses, which represent the thermodynamically most favorable and, thus, stable molecular conformation achievable nowadays in disordered solids. For both external quantum efficiencies and LT lifetimes, OLEDs with four different phosphorescent emitters show.