Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 81
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Electronic non-adiabatic dynamics in enhanced ionization of isotopologues of hydrogen molecular ions from the exact factorization perspective

  • Khosravi, Elham
  • Abedi Khaledi, Ali
  • Rubio Secades, Angel
  • Maitra, Neepa T.
It was recently shown that the exact potential driving the electron's dynamics in enhanced ionization of H-2(+) can have large contributions arising from dynamic electron-nuclear correlation, going beyond what any Coulombic-based model can provide. This potential is defined via the exact factorization of the molecular wavefunction that allows the construction of a Schro "dinger equation for the electronic system, in which the potential contains exactly the effect of coupling to the nuclear system and any external fields. Here we study enhanced ionization in isotopologues of H-2(+) in order to investigate the nuclear-mass-dependence of these terms for this process. We decompose the exact potential into components that naturally arise from the conditional wavefunction, and also into components arising from the marginal electronic wavefunction, and compare the performance of propagation on these different components as well as approximate potentials based on the quasi-static or Hartree approximation with the exact propagation. A quasiclassical analysis is presented to help analyse the structure of different non-Coulombic components of the potential driving the ionizing electron., We acknowledge support from the European Research Council (ERC-2015-AdG-694097), Grupos Consolidados (IT578-13), and the European Union's Horizon 2020 Research and Innovation programme under grant agreement no. 676580. A. K. and A. A. acknowledge funding from the European Union's Horizon 2020 research and innovation programme under the Marie SklodowskaCurie grant agreement no. 704218 and 702406, respectively. N. T. M. thanks the National Science Foundation, grant CHE1566197, for support. Open Access funding provided by the Max Planck Society.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Orbital magneto-optical response of periodic insulators from first principles

  • Lebedeva, Irina V.
  • Strubbe, David A.
  • Tokatly, Ilya
  • Rubio Secades, Angel
Magneto-optical response, i.e. optical response in the presence of a magnetic field, is commonly used for characterization of materials and in optical communications. However, quantum mechanical description of electric and magnetic fields in crystals is not straightforward as the position operator is ill defined. We present a reformulation of the density matrix perturbation theory for time-dependent electromagnetic fields under periodic boundary conditions, which allows us to treat the orbital magneto-optical response of solids at the ab initio level. The efficiency of the computational scheme proposed is comparable to standard linear-response calculations of absorption spectra and the results of tests for molecules and solids agree with the available experimental data. A clear signature of the valley Zeeman effect is revealed in the continuum magneto-optical spectrum of a single layer of hexagonal boron nitride. The present formalism opens the path towards the study of magneto-optical effects in strongly driven low-dimensional systems., We acknowledge the financial support from the European Research Council (ERC2015-AdG-694097), Grupos Consolidados (IT578-13), European Union's H2020 program under GA no. 646259 (MOSTOPHOS) and no. 676580 (NOMAD) and Spanish Ministry (MINECO) Grant no. FIS2016-79464-P.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Real-Time Propagation TDDFT and Density Analysis for Exciton Coupling Calculations in Large Systems

  • Jornet Somoza, Joaquim
  • Lebedeva, Irina V.
Photoactive systems are characterized by their capacity to absorb the energy of light and transform it. Usually, more than one chromophore is involved in the light absorption and excitation transport processes in complex systems. Linear-Response Time-Dependent Density Functional (LR-TDDFT) is commonly used to identify excitation energies and transition properties by solving the well-known Casida's equation for single molecules. However, in practice, LR-TDDFT presents some disadvantages when dealing with multichromophore systems due to the increasing size of the electron hole pairwise basis required for accurate evaluation of the this work, we extend our local density decomposition method that enables us to disentangle individual contributions into the absorption spectrum to computation of exciton dynamic properties, such as exciton coupling parameters. We derive an analytical expression for the transition density from Real-Time Propagation TDDFT (P-TDDFT) based on Linear Response theorems. We demonstrate the validity of our method to determine transition dipole moments, transition densities, and exciton coupling for systems of increasing complexity. We start from the isolated benzaldehyde molecule, perform a distance analysis for pi-stacked dimers, and finally map the exciton coupling for a 14 benzaldehyde cluster., J.J.-S. and I.L. are grateful for the European Research Council (ERC-2010-AdG-267374), Spanish Grant FIS2016-79464-P, and Grupos Consolidados (IT578-13) and EU-H2020 project "MOSTOPHOS" (n. 646259) for financial support. J.J.-S. is grateful for the Spanish Grant IJCI-2014-22204 and H2020-EINFRA-5-2015 project "NOMAD" (n. 676580) and the funding from the European Union Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement No. 795246-StrongLights. The authors gratefully thank Prof. Angel Rubio for his comments and support.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Electronic structure of stoichiometric and reduced ZnO from periodic relativistic all electron hybrid density functional calculations using numeric atom-centered orbitals

  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
The atomic and electronic structure of stoichiometric and reduced ZnO wurtzite has been studied using a periodic relativistic all electron hybrid density functional (PBE0) approach and numeric atom-centered orbital basis set with quality equivalent to aug-cc-pVDZ. To assess the importance of relativistic effects, calculations were carried out without and with explicit inclusion of relativistic effects through the zero order regular approximation. The calculated band gap is ∼0.2 eV smaller than experiment, close to previous PBE0 results including relativistic calculation through the pseudopotential and ∼0.25 eV smaller than equivalent nonrelativistic all electron PBE0 calculations indicating possible sources of error in nonrelativistic all electron density functional calculations for systems containing elements with relatively high atomic number. The oxygen vacancy formation energy converges rather fast with the supercell size, the predicted value agrees with previously hybrid density functional calculations and analysis of the electronic structure evidences the presence of localized electrons at the vacancy site with a concomitant well localized peak in the density of states ∼0.5 eV above the top of the valence band and a significant relaxation of the Zn atoms near to the oxygen vacancy. Finally, present work shows that accurate results can be obtained in systems involving large supercells containing up to ∼450 atoms using a numeric atomic-centered orbital basis set within a full all electron description including scalar relativistic effects at an affordable cost.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Effective and highly selective CO generation from CO2 using a polycrystalline α‑Mo2C catalyst

  • Liu, Xinayun
  • Kunkel, Christian
  • Ramírez de la Piscina, Pilar
  • Homs Martí, Narcís
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
Present experiments show that synthesized polycrystalline hexagonal α-Mo2C is a highly efficient and selective catalyst for CO2 uptake and conversion to CO through the reverse water gas shift reaction. The CO2 conversion is ~16% at 673 K, with selectivity towards CO > 99%. CO2 and CO adsorption is monitored by DRIFTS, TPD, and microcalorimetry, and a series of DFT based calculations including the contribution of dispersion terms. The DFT calculations on most stable model surfaces allow for identifying numerous binding sites present on the catalyst surface, leading to a high complexity in measured and interpreted IR- and TPD-spectra. The computational results also explain ambient temperature CO2 dissociation towards CO as resulting from the presence of surface facets such as Mo2C(201)-Mo/C ¿displaying Mo and C surface atoms¿ and Mo-terminated Mo2C(001)-Mo. An ab initio thermodynamics consideration of reaction conditions however demonstrates that these facets bind CO2 and CO + O intermediates too strong for a subsequent removal, whereas the Mo2C(101)-Mo/C exhibits balanced binding properties, serving a possible explanation of the observed reactivity. In summary, results show that polycrystalline α-Mo2C is an economically viable, highly efficient, and selective catalyst for CO generation using CO2 as a feedstock.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Subsurface carbon: a general feature of noble metals

  • Piqué, Oriol
  • Koleva, Iskra Z.
  • Viñes Solana, Francesc
  • Aleksandrov, Hristiyan A.
  • Vayssilov, Georgi N.
  • Illas i Riera, Francesc
Carbon moieties on late transition metals are regarded as poisoning agents in heterogeneous catalysis. Recent studies show the promoting catalytic role of subsurface C atoms in Pd surfaces and their existence in Ni and Pt surfaces. Here energetic and kinetic evidence obtained by accurate simulations on surface and nanoparticle models shows that such subsurface C species are a general issue to consider even in coinage noble-metal systems. Subsurface C is the most stable situation in densely packed (111) surfaces of Cu and Ag, with sinking barriers low enough to be overcome at catalytic working temperatures. Low-coordinated sites at nanoparticle edges and corners further stabilize them, even in Au, with negligible subsurface sinking barriers. The malleability of low-coordinated sites is key in the subsurface C accommodation. The incorporation of C species decreases the electron density of the surrounding metal atoms, thus affecting their chemical and catalytic activity.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Diversity of adsorbed hydrogen on the TiC (001) surface at high coverages

  • Piñero Vargas, Juan José
  • Ramírez, Pedro J.
  • Bromley, Stefan Thomas
  • Illas i Riera, Francesc
  • Viñes Solana, Francesc
  • Rodríguez, José A.
The catalyzed dissociation of molecular hydrogen on the surfaces of diverse materials is currently widely studied due to its importance in a broad range of hydrogenation reactions that convert noxious exhaust products and/or greenhouse gases into added-value greener products such as methanol. In the search for viable replacements for expensive late transition metal catalysts TiC has been increasingly investigated as a potential catalyst for H2 dissociation. Here, we report on a combination of experiments and density functional theory calculations on the well-defined TiC(001) surface revealing that multiple H and H2 species are available on this substrate, with different binding configurations and adsorption energies. Our calculations predict an initial occupancy of H atoms on surface C atom sites, which then enables the subsequent stabilization of H atoms on top of surface Ti atoms. Further H2 can be also molecularly adsorbed over Ti sites. These theoretical predictions are in full accordance with information extracted from X-ray photoemission spectroscopy and temperature-programmed desorption experiments. The experimental results show that at high coverages of hydrogen there is a reconstruction of the TiC(001) surface which facilitates the binding of the adsorbate.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Jacob's Ladder as Sketched by Escher: assessing the performance of broadly used density functionals on transition metal surface properties

  • Vega Dominguez, Lorena
  • Ruvireta Jurado, Judit
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
The present work surveys the performance of various widely used density functional theory exchange-correlation (xc) functionals in describing observable surface properties of a total of 27 transition metals with face-centered cubic (fcc), body-centered cubic (bcc), or hexagonal close-packed (hcp) crystallographic structures. A total of 81 low Miller index surfaces were considered employing slab models. Exemplary xc functionals within the three first rungs of Jacobs ladder were considered, including the Vosko-Wilk-Nusair xc functional within the local density approximation, the Perdew-Burke-Ernzerhof (PBE) functional within the generalized gradient approximation (GGA), and the Tao-Perdew-Staroverov-Scuseria functional as a meta-GGA functional. Hybrids were excluded in the survey because they are known to fail in properly describing metallic systems. In addition, two variants of PBE were considered, PBE adapted for solids (PBEsol) and revised PBE (RPBE), aimed at improving adsorption energies. Interlayer atomic distances, surface energies, and surface work functions were chosen as the scrutinized properties. A comparison with available experimental data, including single-crystal and polycrystalline values, shows that no xc functional is best at describing all of the surface properties. However, in statistical mean terms the PBEsol xc functional is advised, while PBE is recommended when considering both bulk and surface properties. On the basis of the present results, a discussion of adapting GGA functionals to the treatment of metallic surfaces in an alternative way to meta-GGA or hybrids is provided.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

On the H-2 interactions with transition metal adatoms supported on graphene: a systematic density functional study

  • Manadé, Montserrat
  • Viñes Solana, Francesc
  • Gil, Adrià
  • Illas i Riera, Francesc
The attachment of H-2 to the full set of transition metal (TM) adatoms supported on graphene is studied by using density functional theory. Methodology validation calculations on the interactions of H-2 with benzene and graphene show that any of the vdW corrections under study, the Grimme D2, D3, D3 with Becke-Jonson damping (D3BJ), and Tkatchenko-Scheffler methods, applied on the PBE functional, are similarly accurate in describing such subtle interactions, with an accuracy of almost 2 kJ mol(-1) compared to experiments. The PBE-D3 results show that H-2 physisorbs on especially stable d(5) or d(10) TMs. In other 5d metals, and the rightmost 3d and 4d ones, H-2 dissociates, and only for Y, Mn, Fe, and Zr the H-2 binds strongly enough for its storage in the so-called Kubas mode, where the H-2 bond is sensibly elongated. Other metals (Co, Ni, Ru, Rh and Pd) feature also an elongated Kubas mode, interesting as well for H-2 storage. Sc and Ti display a Kubas modes especially suited, given their lightness, for meeting the gravimetric requirements. The H-2 interactions with TM adatoms imply a TM -> H-2 charge transfer, although the magnetic moment of the system tends to remain intact, except for the early 5d TMs, where the unpaired electron transfer seems to be associated with the H-2 bond breakage.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Adding pieces to the CO/Pt(111) puzzle: the role of dispersion

  • Janthon, Patanachai
  • Viñes Solana, Francesc
  • Sirijaraensre, Jakkapan
  • Limtrakul, Jumras
  • Illas i Riera, Francesc
The so-called CO/Pt(111) puzzle, the experimentally demonstrated preference of CO to adsorb on the top site on the Pt(111) surface rather than the 3-fold hollow sites predicted by standard density functional theory (DFT) methods, was alleged to be solved by properly leveling the CO frontier molecular orbitals. However, the subtle energy difference between the top and hollow sites is of the same order of magnitude as the possible contribution of dispersive forces to this interaction. Herein, the role of dispersion in this system has been investigated by considering the PBE, PBEsol, RevPBE, RPBE, and SOGGA11 generalized gradient approximation (GGA) based exchange-correlation functionals; nonseparable functionals such as N12; and the TPSS and M06-L meta-GGA-type functionals, together with D2, D3, D3BJ, and MBD dispersion corrections. The results reinforce the recommendation of using M06-L for a correct description of CO adsorption-site preference even if including dispersion leads to a change of site and a noticeable overestimation of the adsorption energy indicating the presence of error-compensation effects. The present results also highlight the fact that dispersion contributes in bridging the preference gap between the top and hollow sites when other functionals are used. Dispersive forces play a role in site preference for CO on Pt(111), and it is likely that a similar situation is encountered for other late transition metals. Therefore, dispersion must be considered to reach a completely unbiased description of CO adsorption on metals. Nevertheless, including dispersion leads to adsorption energy values that overestimate the experimental value, indicating the limitations of the existing, widely used density functionals.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Assessing GW approaches for predicting core level binding energies

  • van Setten, Michiel J.
  • Costa Sala, Ramon
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
Here we present a systematic study on the performance of different GW approaches: G(0)W(0), G(0)W(0) with linearized quasiparticle equation (lin-G(0)W(0)), and quasiparticle self-consistent GW (qsGW), in predicting core level binding energies (CLBEs) on a series of representative molecules comparing to Kohn-Sham (KS) orbital energy-based results. KS orbital energies obtained using the PBE functional are 20-30 eV lower in energy than experimental values obtained from X-ray photoemission spectroscopy (XPS), showing that any Koopmans-like interpretation of KS core level orbitals fails dramatically. Results from qsGW lead to CLBEs that are closer to experimental values from XPS, yet too large. For the qsGW method, the mean absolute error is about 2 eV, an order of magnitude better than plain KS PBE orbital energies and quite close to predictions from Delta SCF calculations with the same functional, which are accurate within similar to 1 eV. Smaller errors of similar to 0.6 eV are found for qsGW CLBE shifts, again similar to those obtained using Delta SCF PBE. The computationally more affordable G(0)W(0) approximation leads to results less accurate than qsGW, with an error of similar to 9 eV for CLBEs and similar to 0.9 eV for their shifts. Interestingly, starting G(0)W(0) from PBEO reduces this error to similar to 4 eV with a slight improvement on the shifts as well (similar to 0.4 eV). The validity of the G(0)W(0) results is however questionable since only linearized quasiparticle equation results can be obtained. The present results pave the way to estimate CLBEs in periodic systems where Delta SCF calculations are not straightforward although further improvement is clearly needed.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Matildite Contact with Media: First-Principles Study of AgBiS2 Surfaces and Nanoparticle Morphology

  • Viñes Solana, Francesc
  • Konstantatos, Gerasimos
  • Illas i Riera, Francesc
Motivated by the interest in AgBiS2 material for solar light harvesting applications, a detailed bulk first-principles quantum mechanical study of its surface properties is presented. Density functional theory based calculations with the Perdew-Burke-Ernzerhof functional have been carried out for different surface orientations and terminations of the matildite polymorph. From the results, two particularly stable facets are predicted to dominate Wulff shaped AgBiS2 nanoparticles. These are the (001) type nonpolar surface and the (111) polar terminations where facets are exposed containing solely Ag or S atoms. The Wulff equilibrium shape is predicted to be a cube with only two edges capped. This particular shape explains a previously reported surface enrichment of Ag with respect to Bi of ∼1.5. The (001) surfaces display an ionic character similar to bulk AgBiS2, with a low work function of 4.31 eV, although the inspection of the density of states (DOS) reveals a bandgap increased by 0.3 eV compared to bulk. This surface effect could explain the bulk wavelength overestimation of the absorption coefficient decay, as previously determined. Last but not least, the DOS of the (111) polar termination reveals a metallic character, where Fermi level is located below that on the (001) surfaces. Possible implications of the different electronic structure of these surfaces in the reported photoactivity are discussed.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Combining theory and experiment for multitechnique characterization of activated CO2 on transition metal carbide (001) surfaces

  • Kunkel, Christian
  • Viñes Solana, Francesc
  • Ramírez, Pedro J.
  • Rodríguez, José A.
  • Illas i Riera, Francesc
Early transition metal carbides (TMC; TM = Ti, Zr, Hf, V, Nb, Ta, Mo) with face-centered cubic crystallographic structure have emerged as promising materials for CO2 capture and activation. Density functional theory (DFT) calculations using the Perdew-Burke-Ernzerhof exchange-correlation functional evidence charge transfer from the TMC surface to CO2 on the two possible adsorption sites, namely, MMC and TopC, and the electronic structure and binding strength differences are discussed. Further, the suitability of multiple experimental techniques with respect to (1) adsorbed CO2 recognition and (2) MMC/TopC adsorption distinction is assessed from extensive DFT simulations. Results show that ultraviolet photoemission spectroscopies (UPS), work function changes, core level X-ray photoemission spectroscopy (XPS), and changes in linear optical properties could well allow for adsorbed CO2 detection. Only infrared (IR) spectra and scanning tunnelling microscopy (STM) seem to additionally allow for MMC/TopC adsorption site distinction. These findings are confirmed with experimental XPS measurements, demonstrating CO2 binding on single crystal (001) surfaces of TiC, ZrC, and VC. The experiments also help resolving ambiguities for VC, where CO2 activation was unexpected due to low adsorption energy, but could be related to kinetic trapping involving a desorption barrier. With a wealth of data reported and direct experimental evidence provided, this study aims to motivate further basic surface science experiments on an interesting case of CO2 activating materials, allowing also for a benchmark of employed theoretical models.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Artificial-intelligence-driven discovery of catalyst genes with application to CO2 activation on semiconductor oxides

  • Mazheika, Aliaksei
  • Wang, Yang-Gang
  • Valero Montero, Rosendo
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
  • Ghiringelli, Luca M.
  • Levchenko, Sergey V.
  • Scheffler, Matthias
Catalytic-materials design requires predictive modeling of the interaction between catalyst and reactants. This is challenging due to the complexity and diversity of structure-property relationships across the chemical space. Here, we report a strategy for a rational design of catalytic materials using the artificial intelligence approach (AI) subgroup discovery. We identify catalyst genes (features) that correlate with mechanisms that trigger, facilitate, or hinder the activation of carbon dioxide (CO2) towards a chemical conversion. The AI model is trained on first-principles data for a broad family of oxides. We demonstrate that surfaces of experimentally identified good catalysts consistently exhibit combinations of genes resulting in a strong elongation of a C-O bond. The same combinations of genes also minimize the OCO-angle, the previously proposed indicator of activation, albeit under the constraint that the Sabatier principle is satisfied. Based on these findings, we propose a set of new promising catalyst materials for CO2 conversion.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Comparing the catalytic activity of the water gas shift reaction on Cu(321) and Cu(111) surfaces: step sites do not always enhance the overall reactivity

  • Prats Garcia, Hèctor
  • Gamallo Belmonte, Pablo
  • Illas i Riera, Francesc
  • Sayós Ortega, Ramón
A Density Functional Theory based first-principles kinetic Monte Carlo (kMC) study of the water gas shift reaction on the stepped Cu(321) surface is presented. We use the recently developed graph-theoretical kMC approach coupled with cluster expansion Hamiltonians to model the coverage-dependent energy barriers for the different surface processes, including adsorption/desorption, diffusion and other elementary chemical reactions, totalling 36 elementary steps, which allow two possible competitive mechanisms: redox and associative. All results are compared to a previous kMC study on Cu(111). Both mechanisms are observed for Cu(321) surface with different extension, whereas the associative one was the dominant for Cu(111). The present study shows that, in spite of encompassing lower activation energy barriers, stepped surfaces do not necessarily have an overall larger catalytic activity. Coverage effects and the significant contribution of some of the reverse processes are behind this behaviour.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Matildite versus schapbachite: First-principles investigation of the origin of photoactivity in AgBiS2

  • Viñes Solana, Francesc
  • Bernechea, María
  • Konstantatos, Gerasimos
  • Illas i Riera, Francesc
Recent experiments motivated by solar light harvesting applications have brought a renewed interest in AgBiS2 as an environmentally friendly material with appealing photovoltaic properties. The lack of detailed knowledge on its bulk structural and electronic structure however inhibits further development of this material. Here we have investigated by first-principles quantum mechanical methods models of the two most commonly reported AgBiS2 crystal structures, the room temperature matildite structure, and the metastable schapbachite. Density functional theory (DFT) based calculations using the Perdew-Burke-Ernzerhof exchange-correlation (xc) functional reveal that matildite can be 0.37 eV per AgBiS2 stoichiometry unit more stable than a schapbachite structure in bulk, and that the latter, in its ordered form, may display a metallic electronic structure, precluding its use for solar light harvesting. This points out the fact that AgBiS2 nanocrystals used in solar cells should present a structure based on matildite. Matildite is found to be an indirect gap semiconductor, with an estimated band gap of ∼1.5 eV according to DFT based calculations using the more accurate hybrid xc functionals. These reveal that hole effective mass is twice that of electron effective mass, with concomitant consequences for the generated exciton. Hybrid DFT calculations also show that matildite has a high dielectric constant pertinent to that of an ionic semiconductor and slightly higher than that of PbS, a material that has been extensively used in solar cells in its nanocrystalline form. The calculated Bohr exciton radius of 4.6 nm and the estimated absorption coefficient of 10E5 cm−1 within the solar light spectrum are well in line with those experimentally reported in the literature.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Magnetic coupling constants in three electrons three centres problems from effective Hamiltonian theory and validation of broken symmetry based approaches

  • Reta Mañeru, Daniel
  • Moreira, Ibério de Pinho Ribeiro
  • Illas i Riera, Francesc
In the most general case of three electrons in three symmetry unrelated centres with localized magnetic moments, the low energy spectrum consists of one quartet ( ) and two doublet ( , ) pure spin states. The energy splitting between these spin states can be described with the well-known Heisenberg-Dirac-Van Vleck (HDVV) model spin Hamiltonian, and their corresponding energy expressions are expressed in terms of the three different two-body magnetic coupling constants , and . However, the values of all three magnetic coupling constants cannot be extracted using the calculated energy of the three spin adapted states, since only two linearly independent energy differences between pure spin states exist. This problem has been recently investigated (JCTC 2015, 11, 3650), resulting in an alternative proposal to the original Noodleman's broken symmetry mapping approach. In the present work, this proposal is validated by means of ab initio effective Hamiltonian theory, which allows a direct extraction of all three values from the one-to-one correspondence between the matrix elements of both effective and HDVV Hamiltonian. The effective Hamiltonian matrix representation has been constructed from configuration interaction wave functions for the three spin states obtained for two model systems showing a different degree of delocalization of the unpaired electrons. These encompass a trinuclear Cu(II) complex and a -conjugated purely organic triradical
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Global optimisation of hydroxylated silica clusters: a cascade Monte Carlo Basin Hopping approach

  • Cuko, Andi
  • Macià Escatllar, Antoni
  • Calatayud, Mònica
  • Bromley, Stefan Thomas
We report on a global optimisation study of hydroxylated silica nanoclusters (SiO2)/w(H2O)(N) with sizes M = 6, 8, 10 12, and for each size with a variable number of dissociatively chemisorbed water molecules (N = 1, 2, 3...). Due to the high structural complexity of these systems and the associated ruggedness of the underlying potential energy landscape, we employ a 'cascade' global optimisation approach. Specifically, we use Monte Carlo Basin Hopping (MCBH) where for each step we employ two energy minimisations with: (i) a lightly parameterised but computationally efficient interatomic potential (IP) which does not distinguish between H-bonded conformational isomers, and then (ii) a more sophisticated IP which accounts for polarisation and H-bonding. Final energies from the MCBH search are then refined with optimisations using density functional theory. The reliability of our approach is first established via comparison with previously reported results for the (SiO2)(8).(H2O)(N) case, and then applied to the M = 6, 10 and 12 systems. For all systems studied our results follow the trend in hydroxylation energy versus N, whereby the energy gain with hydroxylation is found to level off at a point where the average tetrahedral distortion of the SiO4 centres is minimised. This optimal hydroxylation point is further found to follow an inverse power law with increasing cluster size (M) with an exponent close to -2/3, further confirming work in previous studies for other cluster sizes. (C) 2016 Elsevier B.V. All rights reserved.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Understanding W doping in wurtzite ZnO

  • Viñes Solana, Francesc
  • Iglesias-Juez, Ana
  • Fernandez-Garcia, Marcos
  • Illas i Riera, Francesc
In the context of bandgap engineering of the ZnO photoactive material for solar harvesting applications via W doping, a number of a priori discrepant experimental observations in the literature concerning ZnO c axis expansion/contraction, bandgap red- or blue-shifting, the Zn-substitutional or interstitial nature of W atoms, or the W6+ charge compensation view with ZnO native defects are addressed by thorough density functional theory calculations on a series of bulk supercell models encompassing a large range of W contents. The present results reconcile the at first sight dissimilar observations by showing that interstitial W (Wi) is only energetically preferred over substitutional (WZn) at large large W doping concentrations; the WZn c lattice expansion can be compensated by a W triggered Zn-vacancy (VZn) c lattice contraction. The presence of WZn energetically fosters nearby VZn defects, and vice versa, up to a double VZn situation. The quantity of mono or divacancies explains the lattice contraction/expansion, and both limiting situations imply gap states which reduce the band gaps, but increase the energy gaps. Based on present results, the ZnO band gap red-shifting necessary for solar light triggered processes is achievable by W doping in Zn rich conditions.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Reliable and computationally affordable prediction of the energy gap of (TiO2)(n) (10 <= n <= 563) nanoparticles from density functional theory

  • Morales García, Ángel
  • Valero Montero, Rosendo
  • Illas i Riera, Francesc
The optical gap (Ogap) of a set of (TiO2)n nanoclusters and nanoparticles with n = 10-563 and different morphologies such as spherical, octahedral, lamellar, or tubular finite structures is investigated based on a relativistic all-electron description along with a numerical atomic centered orbital basis set. Two different functionals are used, PBE and PBEx, the former corresponds to a standard implementation of the generalized gradient approximation (GGA) and the latter to a hybrid functional with 12.5% of Fock exchange which reproduces the band gap of bulk TiO2 anatase and rutile. It is shown that the inclusion of exchange Fock in the PBE functional promotes a systematic energy gap opening of 1.25 eV relative to the PBE values. Remarkably, a linear correlation is found between PBEx and PBE Ogap calculated values with concomitant similar correlations for the HOMO and LUMO orbital energies. However, it appears that PBEx induces a larger downshift on the HOMO orbital than the upshift observed on the LUMO one. The fact that the PBEx hybrid functional was shown to reproduce the experimental energy gaps of stoichiometric and reduced TiO2 bulk phases leads to a suitable and practical way to successfully estimate Ogap of TiO2 nanoparticles containing up to thousands of atoms with PBEx precision from computationally affordable PBE calculations.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

ZnO powders as multi-facet single crystals

  • Haque, Francia
  • Chenot, Stéphane
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
  • Stankic, Slavica
  • Jupille, Jacques
Oxides are most commonly found in divided forms with properties difficult to control since their crystallographic orientations usually escape analysis. To overcome this an appropriate model system can be provided by ZnO smoke which, obtained by combustion of Zn in air, exhibits nanoparticles with well-defined surface facets. The present work focuses on the interaction of water with ZnO smokes by combining density functional theory based simulations and infrared spectroscopy measurements with applied pressures from 10(-7) to 1 mbar. We demonstrate that the use of ultra-high vacuum allows the analysis of the very first stages of the adsorption, and report on water structures on ZnO(11 (2) over bar0) for the first time. We further show that ZnO powders behave as multi-facet single crystals involving (10 (1) over bar 10), (11 (2) over bar0), (0001), and (000 (1) over bar) surfaces with the polar orientations corresponding to 25% of the total surface area. A great deal of cross-agreements between experimental results and simulation provides a simple approach for the examination of hydroxylated/hydrated ZnO smokes and can be widely applied on other ZnO-related powders.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Properties of single oxygen vacancies on a realistic (TiO2)(84) nanoparticle: a challenge for density functionals

  • Morales García, Ángel
  • Lamiel Garcia, Josep Oriol
  • Valero Montero, Rosendo
  • Illas i Riera, Francesc
Based on all electron relativistic density functional theory calculations, the properties of single oxygen vacancies in TiO2 nanoparticles (NPs) have been obtained using a suitable representative model consisting of an octahedral (TiO2)(84) nano particle of similar to 3 nm size terminated with (101) facets. This nanoparticle can be safely considered at the onset of the so-called scalable regime where properties scale linearly with size toward bulklike limit, and hence results can be more directly compared to experiment. A set of reduced Ti84O167 nanoparticles are selected to investigate the geometric, energetic, and electronic properties by using PBE semilocal functional with three different amounts of Fock exchange: 0% (PBE), 12.5% (PBEx), and 25% (PBEO). In particular, using the PBEx hybrid functional, previously validated for bulk anatase and rutile, it is predicted that the highly (three)-coordinated oxygen atom, located in the subsurface, and the least coordinated one at top sites are energetically the most suitable candidate for generating the oxygen vacancy. The subsurface case is in line with conclusions from experiments carried out on (101) single crystal anatase surfaces. The electronic structure of the reduced particles suggests that these would have better photocatalytic activity than their stoichiometric counterparts. Nevertheless, several properties of reduced TiO2 NPs are strongly affected by the choice of the exchange-correlation functional, implying that, in absence of validation by comparison to experiment, predictions must be taken with caution.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

The contact of graphene with Ni(111) surface: description by modern dispersive forces approaches

  • Muñoz-Galán, Helena
  • Viñes Solana, Francesc
  • Gebhardt, Julian
  • Görling, Andreas
  • Illas i Riera, Francesc
Here we present a Density Functional Theory (DFT) study on the suitability of modern corrections for the inclusion of dispersion related terms (DFT-D) in treating the interaction of graphene and metal surfaces, exemplified by the graphene/Ni(111) system. The Perdew-Burke-Ernzerhof (PBE) exchange-correlation functional is used as basis, on top of which we tested the family of Grimme corrections (D2 and D3, including Becke-Jonson damping and Andersson approach) as well as different flavors of the approach by Tkatchenko and Scheffler (TS). Two experimentally observed chemisorbed states, top-fcc and bridge-top conformations, were examined, as well as one physisorbed situation, the hcp-fcc state. Geometric, energetic, and electronic properties were compared to sets of experimental data for our model system of graphene/Ni(111), but also for available data of bulk Ni, graphite, and free-standing graphene. Results show that two of the most recent approximations, the fully ab initio TS-MBD, and the semi-empirical Grimme D3 correction are best suited to describe graphene↔metal contacts, yet, comparing to earlier studies, the Rev-vdW-DF2 functional is also a good option, whereas optB86-vdW and optB88b-vdW functionals are fairly close to experimental values to be harmless used. The present results highlight how different approaches for the approximate treatment of dispersive forces yield different results, and so fine-tuning and testing of the envisioned approach for every specific system is advisable. The present survey clears the path for future accurate and affordable theoretical studies of nanotechnologic devices based on graphene-metal contacts.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Two-dimensional nitrides as highly efficient potential candidates for CO2 capture and activation

  • Morales-Salvador, Raul
  • Morales García, Ángel
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
The performance of novel two-dimensional nitrides in carbon capture and storage (CCS) is analyzed for a broad range of pressures and temperatures. Employing an integrated theoretical framework where CO2 adsorption/desorption rates on the M2N (M = Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, and W) surfaces are derived from transition state theory and density functional theory based calculations, the present theoretical simulations consistently predict that, depending on the particular composition, CO2 can be strongly adsorbed and even activated at temperatures above 1000 K. For practical purposes, Ti2N, Zr2N, Hf2N, V2N, Nb2N, and Ta2N are predicted as the best suited materials for CO2 activation. Moreover, the estimated CO2 uptake of 2.32-7.96 mol CO2 kg-1 reinforces the potential of these materials for CO2 abatement.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Systematic study of the effect of HSE functional internal parameters on the electronic structure and band gap of a representative set of metal oxides

  • Viñes Solana, Francesc
  • Lamiel Garcia, Josep Oriol
  • Ko, Kyoung Chul
  • Lee, Jin Yong
  • Illas i Riera, Francesc
The effect of the amount of Hartree-Fock mixing parameter (α) and of the screening parameter (w) defining the range separated HSE type hybrid functional is systematically studied for a series of seven metal oxides: TiO2, ZrO2, CuO2, ZnO, MgO, SnO2, and SrTiO3. First, reliable band gap values were determined by comparing the optimal α reproducing the experiment with the inverse of the experimental dielectric constant. Then, the effect of the w in the HSE functional on the calculated band gap was explored in detail. Results evidence the existence of a virtually infinite number of combinations of the two parameters which are able to reproduce the experimental band gap, without a unique pair able to describe the full studied set of materials. Nevertheless, the results point out the possibility of describing the electronic structure of these materials through a functional including a screened HF exchange and an appropriate correlation contribution.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Predicting core level binding energies shifts: suitability of the projector augmented wave approach as implemented in VASP

  • Pueyo Bellafont, Noèlia
  • Viñes Solana, Francesc
  • Hieringer, Wolfgang
  • Illas i Riera, Francesc
Here, we assess the accuracy of various approaches implemented in Vienna ab initio simulation package code to estimate core-level binding energy shifts (ΔBEs) using a projector augmented wave method to treat core electrons. The performance of the Perdew-Burke-Ernzerhof (PBE) and the Tao-Perdew-Staroverov-Scuseria (TPSS) exchange-correlation density functionals is examined on a dataset of 68 molecules containing B→F atoms in diverse chemical environments, accounting for 185 different 1s core level binding energy shifts, for which both experimental gas-phase X-ray photoemission (XPS) data and accurate all electron ΔBEs are available. Four procedures to calculate core-level shifts are investigated. Janak-Slater transition state approach yields mean absolute errors of 0.37 (0.21) eV at PBE (TPSS) level, similar to highly accurate all electron ΔSCF approaches using same functionals, and close to XPS experimental accuracy of 0.1 eV. The study supports the use of these procedures to assign ΔBEs of molecular moieties on material surfaces of interest in surface science, nanotechnology, and heterogeneous catalysis.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Predicting size-dependent emergence of crystallinity in nanomaterials: titania nanoclusters versus nanocrystals

  • Lamiel Garcia, Josep Oriol
  • Cuko, Andi
  • Calatayud, Mònica
  • Illas i Riera, Francesc
  • Bromley, Stefan Thomas
Bottom-up and top-down derived nanoparticle structures refined by accurate ab initio calculations are used to investigate the size dependent emergence of crystallinity in titania from the monomer upwards. Global optimisation and data mining are used to provide a series of ( TiO2) N global minima candidates in the range N = 1-38, where our approach provides many new low energy structures for N > 10. A range of nanocrystal cuts from the anatase crystal structure are also considered up to a size of over 250 atoms. All nanocrystals considered are predicted to be metastable with respect to non-crystalline nanoclusters, which has implications with respect to the limitations of the cluster approach to modelling large titania nanosystems. Extrapolating both data sets using a generalised expansion of a top-down derived energy expression for nanoparticles, we obtain an estimate of the non-crystalline to crystalline crossover size for titania. Our results compare well with the available experimental results and imply that anatase-like crystallinity emerges in titania nanoparticles of approximately 2-3 nm diameter.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Single oxygen vacancies of (TiO2)35 as a prototype of reduced nanoparticle: implication for photocatalytic activity

  • Kim, Sunkyung
  • Ko, Kyoung Chul
  • Lee, Jin Yong
  • Illas i Riera, Francesc
Titanium dioxide (TiO2), as a semiconductor metal oxide, has been one of the most popular materials studied in the field of photocatalysis. In the present study, the properties of single oxygen vacancies of (TiO2)35, a prototype of an anatase nanoparticle, were investigated by DFT calculations. (TiO2)35 is the minimum sized model (∼2 nm) for a bipyramidal nanoparticle with anatase phase and eight {101} facets. All the available oxygen vacancies at various sites according to position, coordination number, and distance from the center atom were examined. The geometric, energetic and electronic properties of the reduced TiO2 clusters were analyzed by hybrid DFT functionals with different Hartree-Fock exchange ratios (0, 12.5 and 25%). It was found that the structure of pristine (TiO2)35 is somewhat different from the bulk lattice, with a relatively high surface to volume ratio. Moreover, the particular highly (three)-coordinated oxygen atom is energetically the most favorable for oxygen vacancy formation from the nanoparticle mainly due to its substantially high relaxation energy. TiO2 nanoparticles have low oxygen vacancy formation energy and narrow band gap because of their defect states, and can be utilized as an efficient photocatalyst material.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Effect of size and structure on the ground-state and excited-state electronic structure of TiO2 nanoparticles

  • Cho, Daeheum
  • Ko, Kyoung Chul
  • Lamiel Garcia, Josep Oriol
  • Bromley, Stefan Thomas
  • Lee, Jin Yong
  • Illas i Riera, Francesc
We investigated the influence of size and structure on the electronic structure of TiO2 nanoparticles 0.5-3.2 nm in diameter, in both vacuum and water, using density functional theory (DFT) calculations. Specifically, we tracked the optical and electronic energy gap of a set of (TiO2)(n) nanoparticles ranging from small non-bulklike clusters with n = 4, 8, and 16, to larger nanoparticles derived from the anatase bulk crystal with n = 35 and 84. As the difference between these two energy gaps (the exciton binding energy) becomes negligible in the bulk, this magnitude provides an indicator of the bulklike character of the electronic structure of the nanoparticles under study. Extrapolating our results to larger sizes, we obtain a rough estimate of the nanoparticle size at which the electronic structure will begin to be effectively bulklike. Our results generally confirmed that the electronic structure of the nanoparticle ground state and excited state has a more pronounced structure dependency than size dependency within a size range of 0.5-1.5 nm. We also showed that the thermodynamic preference for the photocatalytic species is the first S-1 exciton. This S-1 exciton is stable under vacuum but may evolve to free charge carriers upon structural relaxation in an aqueous environment for particles 0.5-1.5 nm in size studied in the present article. An analysis of ionization potentials and electron affinities, relative to the standard reduction potential for the water splitting half-reactions, revealed the importance of considering the structural relaxation in the excited states and the presence of water for assessing the thermodynamic conditions for photocatalytic water splitting.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Size dependent structural and polymorphic transitions in ZnO: from nanocluster to bulk

  • Viñes Solana, Francesc
  • Lamiel Garcia, Josep Oriol
  • Illas i Riera, Francesc
  • Bromley, Stefan Thomas
We report on an extensive survey of (ZnO)(N) nanostructures ranging from bottom-up generated nanoclusters to top-down nanoparticles cuts from bulk polymorphs. The obtained results enable us to follow the energetic preferences of structure and polymorphism in (ZnO)(N) systems with N varying between 10-1026. This size range encompasses small nanoclusters with 10s of atoms and nanoparticles with 100s of atoms, which we also compare with appropriate bulk limits. In all cases the nanostructures and bulk systems are optimized using accurate all-electron, relativistic density functional theory based calculations with numeric atom centered orbital basis sets. Specifically, sets of five families of (ZnO)(N) species are considered: single-layered and multi-layered nanocages, and bulk cut nanoparticles from the sodalite (SOD), body centered tetragonal (BCT), and wurtzite (WZ) ZnO polymorphs. Using suitable fits to interpolate and extrapolate these data allows us to assess the size-dependent energetic stabilities of each family. With increasing size our results indicate a progressive change in energetic stability from single-layered to multi-layered cage-like nanoclusters. For nanoparticles of around 2.6 nm diameter we identify a transitional region where multi-layered cages, SOD, and BCT nanostructures are very similar in energetic stability. This transition size also marks the size regime at which bottom-up nanoclusters give way to top-down bulk-cut nanoparticles. Eventually, a final crossover is found where the most stable WZ-ZnO polymorph begins to energetically dominate at N similar to 2200. This size corresponds to an approximate nanoparticle diameter of 4.7 nm, in line with experiments reporting the observation of wurtzite crystallinity in isolated ligand-free ZnO nanoparticles of 4-5 nm size or larger.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Adsorption and dissociation of molecular hydrogen on orthorhombic β- Mo2C and cubic δ-MoC (001) surfaces

  • Posada Pérez, Sergio
  • Viñes Solana, Francesc
  • Valero Montero, Rosendo
  • Rodríguez, José A.
  • Illas i Riera, Francesc
Molybdenum carbides are increasingly used in heterogeneously catalyzed hydrogenation reactions, which imply the adsorption and dissociation of molecular hydrogen. Here a systematic density functional theory based study, including or excluding dispersion terms, concerning the interaction and stability of H2 with cubic δ-MoC(001) and orthorhombic β-Mo2C(001) surfaces is presented. In the latter case the two possible C or Mo terminations are considered. In addition, different situations for the H covered surfaces are examined. Computational results including dispersive forces predict as essentially spontaneous dissociation of H2 on β-Mo2C(001) independently of the surface termination, whereas on δ-MoC(001) molecular hydrogen dissociation implies a small but noticeable energy barrier. Furthermore, the ab initio thermodynamics formalism has been used to compare the stability of different H coverages. Finally, core level binding energies and vibrational frequencies are presented with the aim to assist the interpretation of yet unavailable data from X-ray photoelectron and infrared spectroscopies.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Robustness of surface activity electronic structure-based descriptors of transition metals

  • Vega Dominguez, Lorena
  • Martínez, Biel
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
Efficient yet simple electronic structure-based descriptors of transition metal surfaces are key in material design for many scientific fields in research and technology. Density functional theory-based methods provide the framework to systematically explore the performance and transferability of such descriptors. Using appropriate surface models and the Vosko-Wilk-Nussair (VWN), Perdew-Burke-Ernzerhof (PBE), PBE adapted for solids (PBEsol), revised PBE (RPBE), and Tao-Perdew-Staroverov-Scuseria (TPSS) exchange-correlation functionals, we study the transferability of three descriptors: the d-band centre, the width-corrected d-band centre, and the Hilbert transform highest peak, among the low-index Miller surfaces for the metals of transition elements. We show that the d-band centre and the width-corrected d-band centre descriptors are almost independent of the functional used whereas a dependency is seen in the Hilbert transform highest peak. Moreover, it is seen that the differences between the surface descriptor values and predictions from the bulk ones are affected by the presence of surface states. Interestingly, a direct relation between the surface coordination number and the d-band centre electronic descriptor is found when surface states are absent.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Biogas upgrading by transition metal carbides

  • Kunkel, Christian
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
The separation of carbon dioxide (CO2) from methane (CH4) is critical in biogas upgrading, requiring materials with high selectivity toward one of the two gas components. Hereby we show, by means of density functional theory based calculations including dispersive forces description, the distinct interaction of CO2 and CH4 with the most stable (001) surfaces of seven transition metal carbides (TMC; TM = Ti, Zr, Hf, V, Nb, Ta, and Mo). Transition state theory derived ad-/desorption rates suggest a very high CO2 uptake and selectivity over CH4 even at ambient temperature and low partial gas pressures.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

On the prediction of core level binding energies in molecules, surfaces and solids

  • Viñes Solana, Francesc
  • Sousa Romero, Carmen
  • Illas i Riera, Francesc
Core level binding energies, directly measured by X-ray photoelectron spectroscopy (XPS), provide unique information regarding the chemical environment of atoms in a given system. However, interpretation of XPS in extended systems may not be straightforward and requires assistance from theory. The different state-of-the-art theoretical methods commonly used to approach core level binding energies and their shifts with respect to a given reference are reviewed and critically assessed with special emphasis on recently developed theoretical methods and with a focus on future applications in materials and surface sciences.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

When anatase nanoparticles become bulk-like: properties of realistic TiO2 nanoparticles in the 1-6 nm size range from all electron relativistic density functional theory based calculations

  • Lamiel Garcia, Josep Oriol
  • Ko, Kyoung Chul
  • Lee, Jin Yong
  • Bromley, Stefan Thomas
  • Illas i Riera, Francesc
All electron relativistic density functional theory (DFT) based calculations using numerical atom-centered orbitals have been carried out to explore the relative stability, atomic, and electronic structure of a series of stoichiometric TiO2 anatase nanoparticles explicitly containing up to 1365 atoms as a function of size and morphology. The nanoparticles under scrutiny exhibit octahedral or truncated octahedral structures and span the 1-6 nm diameter size range. Initial structures were obtained using the Wulff construction, thus exhibiting the most stable (101) and (001) anatase surfaces. Final structures were obtained from geometry optimization with full relaxation of all structural parameters using both generalized gradient approximation (GGA) and hybrid density functionals. Results show that, for nanoparticles of a similar size, octahedral and truncated octahedral morphologies have comparable energetic stabilities. The electronic structure properties exhibit a clear trend converging:to the bulk values as the size of the nanoparticles increases but with a marked influence of the density functional employed. Our results suggest that electronic structure properties, and hence reactivity, for the largest anatase nanoparticles considered in this study will be similar to those exhibited by even larger mesoscale particles or by bulk systems. Finally, we present compelling evidence that anatase nanoparticles become effectively bulklike when reaching a size of similar to 20 nm diameter.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Performance of a modified hybrid functional in the simultaneous description of stoichiometric and reduced TiO2 polymorphs

  • Ko, Kyoung Chul
  • Lamiel Garcia, Josep Oriol
  • Lee, Jin Yong
  • Illas i Riera, Francesc
Conventional density functionals with either the local density approximation (LDA) or the generalized gradient approximation (GGA) form of the exchange-correlation potential fail to describe the electronic structure of a large number of metal oxides. Both the LDA and the GGA grossly underestimate the band gaps of these materials which severely affect the description of oxygen vacancy point defect states in reduced samples. To find a pragmatic approach to simultaneously and accurately describe the atomic and electronic structures of the most common TiO2 polymorphs, we explore the effect of the percentage of exact, non-local, Fock exchange on the electronic structure of stoichiometric rutile and anatase. From these results, a modified hybrid functional is proposed to properly describe the atomic structures, formation enthalpies and electronic structures of rutile and anatase and, at the same time, the results of reduced samples are also in good agreement with the available experimental results. The present approach can be safely used to accurately describe numerous TiO2 based materials containing defects or realistic nanoparticles for which the required large unit cells or system sizes hinder the use of GW related techniques.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Tuning transition metal carbide activity by surface metal alloying: a case study on CO2 capture and activation

  • López Berbel, Martí
  • Broderick, Luke
  • Carey, John J.
  • Viñes Solana, Francesc
  • Nolan, Michael
  • Illas i Riera, Francesc
CO2 is one of the main actors in the greenhouse effect and its removal from the atmosphere is becoming an urgent need. Thus, CO2 capture and storage (CCS) and CO2 capture and usage (CCU) are intensively investigated technologies to decrease the concentration of atmospheric CO2. Both CCS and CCU require appropriate materials to adsorb/release and adsorb/activate CO2, respectively. Recently, it has been theoretically and experimentally shown that transition metal carbides (TMC) are able to capture, store, and activate CO2. To further improve the adsorption capacity of these materials, a deep understanding of the atomic level processes involved is essential. In the present work, we theoretically investigate the possible effects of surface metal doping of these TMCs by taking TiC as a textbook case and Cr, Hf, Mo, Nb, Ta, V, W, and Zr as dopants. Using periodic slab models with large supercells and state-of-the-art density functional theory based calculations we show that CO2 adsorption is enhanced by doping with metals down a group but worsened along the d series. Adsorption sites, dispersion, and coverage appear to play a minor, secondary constant effect. The dopant-induced adsorption enhancement is highly biased by the charge rearrangement at the surface. In all cases, CO2 activation is found but doping can shift the desorption temperature by up to 135 K.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient and accurate modeling of electron photoemission in nanostructures with TDDFT

  • Wopperer, Philipp
  • Giovannini, Umberto de
  • Rubio, Angel
We derive and extend the time-dependent surface-flux method introduced in [L. Tao, A. Scrinzi, New J. Phys. 14, 013021 (2012)] within a time-dependent density-functional theory (TDDFT) formalism and use it to calculate photoelectron spectra and angular distributions of atoms and molecules when excited by laser pulses. We present other, existing computational TDDFT methods that are suitable for the calculation of electron emission in compact spatial regions, and compare their results. We illustrate the performance of the new method by simulating strong-field ionization of C60 fullerene and discuss final state effects in the orbital reconstruction of planar organic molecules., We acknowledge financial support from the European Research Council (ERC-2010-AdG-267374), Spanish grant (FIS2013-46159-C3-1-P) and Grupos Consolidados (IT578-13). This work was partly supported by the European Union’s Horizon 2020 research and innovation program under grant agreement no. 676580 with the Novel Materials Discovery (NOMAD) laboratory, a European Center of Excellence, H2020-NMP-2014 project MOSTOPHOS (GA no. 646259), and the COST Action MP1306 (EUSpec)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electronic non-adiabatic dynamics in enhanced ionization of isotopologues of hydrogen molecular ions from the exact factorization perspective

  • Khosravi, Elham
  • Abedi, Ali
  • Rubio, Angel
  • Maitra, Neepa T.
It was recently shown that the exact potential driving the electron's dynamics in enhanced ionization of H can have large contributions arising from dynamic electron-nuclear correlation, going beyond what any Coulombic-based model can provide. This potential is defined via the exact factorization of the molecular wavefunction that allows the construction of a Schrödinger equation for the electronic system, in which the potential contains exactly the effect of coupling to the nuclear system and any external fields. Here we study enhanced ionization in isotopologues of H in order to investigate the nuclear-mass-dependence of these terms for this process. We decompose the exact potential into components that naturally arise from the conditional wavefunction, and also into components arising from the marginal electronic wavefunction, and compare the performance of propagation on these different components as well as approximate potentials based on the quasi-static or Hartree approximation with the exact propagation. A quasiclassical analysis is presented to help analyse the structure of different non-Coulombic components of the potential driving the ionizing electron., We acknowledge support from the European Research Council (ERC-2015-AdG-694097), Grupos Consolidados (IT578-13), and the European Union’s Horizon 2020 Research and Innovation programme under grant agreement no. 676580. A. K. and A. A. acknowledge funding from the European Union’s Horizon 2020 research and innovation programme under the Marie SklodowskaCurie grant agreement no. 704218 and 702406, respectively. N. T. M. thanks the National Science Foundation, grant CHE1566197, for support. Open Access funding provided by the Max Planck Society., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Application of the real-time time-dependent density functional theory to excited-state dynamics of molecules and 2D materials

  • Miyamoto, Yoshiyuki
  • Rubio, Angel
We review our recent developments in the ab initio simulation of excited-state dynamics within the framework of time-dependent density functional theory (TDDFT). Our targets range from molecules to 2D materials, although the methods are general and can be applied to any other finite and periodic systems. We discuss examples of excited-state dynamics obtained by real-time TDDFT coupled with molecular dynamics (MD) and the Ehrenfest approximation, including photoisomerization in molecules, photoenhancement of the weak interatomic attraction of noble gas atoms, photoenhancement of the weak interlayer interaction of 2D materials, pulse-laser-induced local bond breaking of adsorbed atoms on 2D sheets, modulation of UV light intensity by graphene nanoribbons at terahertz frequencies, and collision of high-speed ions with the 2D material to simulate the images taken by He ion microscopy. We illustrate how the real-time TDDFT approach is useful for predicting and understanding non-equilibrium dynamics in condensed matter. We also discuss recent developments that address the excited-state dynamics of systems out of equilibrium and future challenges in this fascinating field of research., YM acknowledges financial support from JSPS KAKENHI (Grant Numbers JP16H00925 and JP16K05049) and from a project supported by the New Energy and Industrial Technology Development Organization (NEDO). AR acknowledges financial support from the European Research Council (ERC-2015-AdG-694097), Grupos Consolidados (IT578-13) of the UPV=EHU and Basque Government, the European Union’s H2020 program under GA No. 676580 (NOMAD), MOSTOPHOS (GA No. 646259), and the JSPS Fellowship program in 2016., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Orbital magneto-optical response of periodic insulators from first principles

  • Lebedeva, Irina
  • Strubbe, David A.
  • Tokatly, Ilya
  • Rubio, Angel
Magneto-optical response, i.e. optical response in the presence of a magnetic field, is commonly used for characterization of materials and in optical communications. However, quantum mechanical description of electric and magnetic fields in crystals is not straightforward as the position operator is ill defined. We present a reformulation of the density matrix perturbation theory for time-dependent electromagnetic fields under periodic boundary conditions, which allows us to treat the orbital magneto-optical response of solids at the ab initio level. The efficiency of the computational scheme proposed is comparable to standard linear-response calculations of absorption spectra and the results of tests for molecules and solids agree with the available experimental data. A clear signature of the valley Zeeman effect is revealed in the continuum magneto-optical spectrum of a single layer of hexagonal boron nitride. The present formalism opens the path towards the study of magneto-optical effects in strongly driven low-dimensional systems., We acknowledge the financial support from the European Research Council (ERC-2015-AdG-694097), Grupos Consolidados (IT578-13), European Union’s H2020 program under GA no. 646259 (MOSTOPHOS) and no. 676580 (NOMAD) and Spanish Ministry (MINECO) Grant No. FIS2016-79464-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multiple-orbital effects in laser-induced electron diffraction of aligned molecules

  • Krečinić, Faruk
  • Wopperer, Philipp
  • Frusteri, Biagio
  • Brauße, Felix
  • Brisset, Jean-Gabriel
  • Giovannini, Umberto de
  • Rubio, Angel
  • Rouzée, Arnaud
  • Vrakking, Marc J. J.
Photoelectron angular distributions (PADs) resulting from 800 and 1300 nm strong-field ionization of impulsively aligned CF3I molecules were analyzed using time-dependent density functional theory (TDDFT). The normalized difference between the PADs for aligned and antialigned molecules displays large modulations in the high-energy recollision plateau that are assigned to the diffraction of backscattered photoelectrons. The TDDFT calculations reveal that, in spite of their 2.6 eV energy difference, ionization from the HOMO-1 orbital contributes to the diffraction pattern on the same footing as ionization from the doubly degenerate HOMO orbital., F.K. would like to acknowledge funding under European Community’s Seventh Framework Programme under Contract No. ITN-2008-238362 (ATTOFEL). P.W., B.F., U.D.G., and A.R. acknowledge financial support from the European Research Council (ERC-2015-AdG-694097), Grupos Consolidados (IT578-13), and European Unions Horizon 2020 Research and Innovation program under Grant Agreement No. 676580 (NOMAD). A.R. would like to thank the Deutsche Forschungsgemeinschaft, Schwerpunktprogramm 1840 (SPP 1840 QUTIF project). This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 674960 (ASPIRE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Universal steps in quantum dynamics with time-dependent potential-energy surfaces: Beyond the Born-Oppenheimer picture

  • Albareda, Guillermo
  • Abedi, Ali
  • Tavernelli, Ivano
  • Rubio, Angel
It was recently shown [G. Albareda et al., Phys. Rev. Lett. 113, 083003 (2014)] that within the conditional decomposition approach to the coupled electron-nuclear dynamics, the electron-nuclear wave function can be exactly decomposed into an ensemble of nuclear wave packets effectively governed by nuclear conditional time-dependent potential-energy surfaces (C-TDPESs). Employing a one-dimensional model system, we show that for strong nonadiabatic couplings the nuclear C-TDPESs exhibit steps that bridge piecewise adiabatic Born-Oppenheimer potential-energy surfaces. The nature of these steps is identified as an effect of electron-nuclear correlation. Furthermore, a direct comparison with similar discontinuities recently reported in the context of the exact factorization framework allows us to draw conclusions about the universality of these discontinuities, viz., they are inherent to all nonadiabatic nuclear dynamics approaches based on (exact) time-dependent potential-energy surfaces., G.A. acknowledges financial support from the Beatriu de Pinos program through the Project 2014-BP-B-00244 and the Spanish Grant No. CTQ2016-76423-P. I.T. acknowledges the Swiss National Science Foundation (SNF) through Grant No. 200021-146396 and NCCR-MARVEL. We also acknowledge financial support from the European Research Council (ERC2015-AdG-694097), Grupos Consolidados (IT578-13), COST Actions CM1204 (XLIC) and MP1306 (EUSpec), and the European Union’s H2020 programme under Grant Agreement No. 676580 (NOMAD). A.A. acknowledges funding from the European Union Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 702406., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Otros (Other)

Towards a Common Format for Computational Material Science Data

  • Ghiringhelli, Luca M.
  • Carbogno, Christian
  • Levchenko, Sergey
  • Mohamed, Fawzi
  • Huhs, Georg|||0000-0002-0898-4150
  • Lüders, Martin
  • Oliveira, Micael
  • Scheffler, Matthias
Preprint arXiv:1607.04738, Information and data exchange is an important aspect of scientific progress. In computational materials science, a prerequisite for smooth data exchange is standardization, which means using agreed conventions for, e.g., units, zero base lines, and file formats. There are two main strategies to achieve this goal. One accepts the heterogeneous nature of the community which comprises scientists from physics, chemistry, bio-physics, and materials science, by complying with the diverse ecosystem of computer codes and thus develops “converters” for the input and output files of all important codes. These converters then translate the data of all important codes into a standardized, code-independent format. The other strategy is to provide standardized open libraries that code developers can adopt for shaping their inputs, outputs, and restart files, directly into the same code-independent format. We like to emphasize in this paper that these two strategies can and should be regarded as complementary, if not even synergetic. The main concepts and software developments of both strategies are very much identical, and, obviously, both approaches should give the same final result. In this paper, we present the appropriate format and conventions that were agreed upon by two teams, the Electronic Structure Library (ESL) of CECAM and the NOMAD (NOvel MAterials Discovery) Laboratory, a European Centre of Excellence (CoE). This discussion includes also the definition of hierarchical metadata describing state-of-the-art electronic-structure calculations., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 676580, The NOMAD Laboratory, a European Center of Excellence, and the BBDC (contract 01IS14013E). We thank James Kermode and Saulius Gražulis for their contribution to the discussion on the metadata, and Pasquale Pavone for precious suggestions on the metadata structure and names. We thank Patrick Rinke for carefully reading the manuscript. We thank Claudia Draxl and Kristian Thygesen for their contribution to the discussions on the necessary information to be stored for excited-state calculations and on the error bars and uncertainties. We gratefully acknowledge Damien Caliste, Fabiano Corsetti, Hubert Ebert, Jan Minar, Yann Pouillon, Thomas Ruh, David Strubbe, and Marc Torrent for their contributions to the ESCDF specifications. We acknowledge inspiring discussions with Georg Kresse, Peter Blaha, Xavier Gonze, Bernard Delley, and Jörg Hutter on the energy-zero definition and scalar-field representation. We thank Ole Andersen, Evert Jan Baerends, Peter Blaha, Lambert Colin, Bernard Delley, Thierry Deutsch, Claudia Draxl, John Kay Dewhurst, Roberto Dovesi, Paolo Giannozzi, Mike Gillan, Xavier Gonze, Michael Frisch, Martin Head-Gordon, Juerg Hutter, Klaus Koepernik, Georg Kresse, Roland Lindh, Hans Lischka, Andrea Marini, Todd Martinez, Jens Jørgen Mortensen, Frank Neese, Richard Needs, Taisuke Ozaki, Mike Payne, Angel Rubio, Trond Saue, Chris Skylaris, Jose Soler, John Stanton, James Stewart, Marat Valiev for checking the information provided in Table 1 and for useful suggestions.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Towards efficient data exchange and sharing for big-data driven materials science: metadata and data formats

  • Ghiringhelli, Luca M.
  • Carbogno, Christian
  • Levchenko, Sergey
  • Mohamed, Fawzi
  • Huhs, Georg|||0000-0002-0898-4150
  • Lüders, Martin
  • Oliveira, Micael
  • Scheffler, Matthias
With big-data driven materials research, the new paradigm of materials science, sharing and wide accessibility of data are becoming crucial aspects. Obviously, a prerequisite for data exchange and big-data analytics is standardization, which means using consistent and unique conventions for, e.g., units, zero base lines, and file formats. There are two main strategies to achieve this goal. One accepts the heterogeneous nature of the community, which comprises scientists from physics, chemistry, bio-physics, and materials science, by complying with the diverse ecosystem of computer codes and thus develops “converters” for the input and output files of all important codes. These converters then translate the data of each code into a standardized, code-independent format. The other strategy is to provide standardized open libraries that code developers can adopt for shaping their inputs, outputs, and restart files, directly into the same code-independent format. In this perspective paper, we present both strategies and argue that they can and should be regarded as complementary, if not even synergetic. The represented appropriate format and conventions were agreed upon by two teams, the Electronic Structure Library (ESL) of the European Center for Atomic and Molecular Computations (CECAM) and the NOvel MAterials Discovery (NOMAD) Laboratory, a European Centre of Excellence (CoE). A key element of this work is the definition of hierarchical metadata describing state-of-the-art electronic-structure calculations., We thank James Kermode and Saulius Gražulis for their contribution to the discussion on the metadata, and Pasquale Pavone for precious suggestions on the metadata structure and names. We thank Patrick Rinke and Ghanshyam Pilania for carefully reading the manuscript. We thank Claudia Draxl and Kristian Thygesen for their contribution to the discussions on the necessary information to be stored for excitedstate calculations and on the error bars and uncertainties. We gratefully acknowledge Damien Caliste, Fabiano Corsetti, Hubert Ebert, Jan Minar, Yann Pouillon, Thomas Ruh, David Strubbe, and Marc Torrent for their contributions to the ESCDF specifications. We acknowledge Benjamin Regler for the development of the graphical interface for the query on the NOMAD Archive. We acknowledge inspiring discussions with Georg Kresse, Peter Blaha, Xavier Gonze, Bernard Delley, and Jörg Hutter on the energy-zero definition and scalar-field representation. We thank Ole Andersen, Evert Jan Baerends, Peter Blaha, Lambert Colin, Bernard Delley, Thierry Deutsch, Claudia Draxl, John Kay Dewhurst, Roberto Dovesi, Paolo Giannozzi, Mike Gillan, Xavier Gonze, Michael Frisch, Martin Head-Gordon, Juerg Hutter, Klaus Koepernik, Georg Kresse, Roland Lindh, Hans Lischka, Andrea Marini, Todd Martinez, Jens Jørgen Mortensen, Frank Neese, Richard Needs, Taisuke Ozaki, Mike Payne, Angel Rubio, Trond Saue, Chris Skylaris, Jose Soler, John Stanton, James Stewart, Marat Valiev for checking the information provided in Table 1 and for useful suggestions. This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 676580, The NOMAD Laboratory, a European Center of Excellence, and the BBDC (contract 01IS14013E)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

When anatase nanoparticles become bulk-like: properties of realistic TiO2 nanoparticles in the 1-6 nm size range from all electron relativistic density functional theory based calculations

  • Lamiel Garcia, Josep Oriol
  • Ko, Kyoung Chul
  • Lee, Jin Yong
  • Bromley, Stefan Thomas
  • Illas i Riera, Francesc
All electron relativistic density functional theory (DFT) based calculations using numerical atom-centered orbitals have been carried out to explore the relative stability, atomic, and electronic structure of a series of stoichiometric TiO2 anatase nanoparticles explicitly containing up to 1365 atoms as a function of size and morphology. The nanoparticles under scrutiny exhibit octahedral or truncated octahedral structures and span the 1-6 nm diameter size range. Initial structures were obtained using the Wulff construction, thus exhibiting the most stable (101) and (001) anatase surfaces. Final structures were obtained from geometry optimization with full relaxation of all structural parameters using both generalized gradient approximation (GGA) and hybrid density functionals. Results show that, for nanoparticles of a similar size, octahedral and truncated octahedral morphologies have comparable energetic stabilities. The electronic structure properties exhibit a clear trend converging:to the bulk values as the size of the nanoparticles increases but with a marked influence of the density functional employed. Our results suggest that electronic structure properties, and hence reactivity, for the largest anatase nanoparticles considered in this study will be similar to those exhibited by even larger mesoscale particles or by bulk systems. Finally, we present compelling evidence that anatase nanoparticles become effectively bulklike when reaching a size of similar to 20 nm diameter.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

ZnO powders as multi-facet single crystals

  • Haque, Francia
  • Chenot, Stéphane
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
  • Stankic, Slavica
  • Jupille, Jacques
Oxides are most commonly found in divided forms with properties difficult to control since their crystallographic orientations usually escape analysis. To overcome this an appropriate model system can be provided by ZnO smoke which, obtained by combustion of Zn in air, exhibits nanoparticles with well-defined surface facets. The present work focuses on the interaction of water with ZnO smokes by combining density functional theory based simulations and infrared spectroscopy measurements with applied pressures from 10(-7) to 1 mbar. We demonstrate that the use of ultra-high vacuum allows the analysis of the very first stages of the adsorption, and report on water structures on ZnO(11 (2) over bar0) for the first time. We further show that ZnO powders behave as multi-facet single crystals involving (10 (1) over bar 10), (11 (2) over bar0), (0001), and (000 (1) over bar) surfaces with the polar orientations corresponding to 25% of the total surface area. A great deal of cross-agreements between experimental results and simulation provides a simple approach for the examination of hydroxylated/hydrated ZnO smokes and can be widely applied on other ZnO-related powders.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Robustness of surface activity electronic structure-based descriptors of transition metals

  • Vega Dominguez, Lorena
  • Martínez, Biel
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
Efficient yet simple electronic structure-based descriptors of transition metal surfaces are key in material design for many scientific fields in research and technology. Density functional theory-based methods provide the framework to systematically explore the performance and transferability of such descriptors. Using appropriate surface models and the Vosko-Wilk-Nussair (VWN), Perdew-Burke-Ernzerhof (PBE), PBE adapted for solids (PBEsol), revised PBE (RPBE), and Tao-Perdew-Staroverov-Scuseria (TPSS) exchange-correlation functionals, we study the transferability of three descriptors: the d-band centre, the width-corrected d-band centre, and the Hilbert transform highest peak, among the low-index Miller surfaces for the metals of transition elements. We show that the d-band centre and the width-corrected d-band centre descriptors are almost independent of the functional used whereas a dependency is seen in the Hilbert transform highest peak. Moreover, it is seen that the differences between the surface descriptor values and predictions from the bulk ones are affected by the presence of surface states. Interestingly, a direct relation between the surface coordination number and the d-band centre electronic descriptor is found when surface states are absent.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Two-dimensional nitrides as highly efficient potential candidates for CO2 capture and activation

  • Morales-Salvador, Raul
  • Morales García, Ángel
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
The performance of novel two-dimensional nitrides in carbon capture and storage (CCS) is analyzed for a broad range of pressures and temperatures. Employing an integrated theoretical framework where CO2 adsorption/desorption rates on the M2N (M = Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, and W) surfaces are derived from transition state theory and density functional theory based calculations, the present theoretical simulations consistently predict that, depending on the particular composition, CO2 can be strongly adsorbed and even activated at temperatures above 1000 K. For practical purposes, Ti2N, Zr2N, Hf2N, V2N, Nb2N, and Ta2N are predicted as the best suited materials for CO2 activation. Moreover, the estimated CO2 uptake of 2.32-7.96 mol CO2 kg-1 reinforces the potential of these materials for CO2 abatement.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Systematic study of the effect of HSE functional internal parameters on the electronic structure and band gap of a representative set of metal oxides

  • Viñes Solana, Francesc
  • Lamiel Garcia, Josep Oriol
  • Ko, Kyoung Chul
  • Lee, Jin Yong
  • Illas i Riera, Francesc
The effect of the amount of Hartree-Fock mixing parameter (α) and of the screening parameter (w) defining the range separated HSE type hybrid functional is systematically studied for a series of seven metal oxides: TiO2, ZrO2, CuO2, ZnO, MgO, SnO2, and SrTiO3. First, reliable band gap values were determined by comparing the optimal α reproducing the experiment with the inverse of the experimental dielectric constant. Then, the effect of the w in the HSE functional on the calculated band gap was explored in detail. Results evidence the existence of a virtually infinite number of combinations of the two parameters which are able to reproduce the experimental band gap, without a unique pair able to describe the full studied set of materials. Nevertheless, the results point out the possibility of describing the electronic structure of these materials through a functional including a screened HF exchange and an appropriate correlation contribution.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Global optimisation of hydroxylated silica clusters: a cascade Monte Carlo Basin Hopping approach

  • Cuko, Andi
  • Macià Escatllar, Antoni
  • Calatayud, Mònica
  • Bromley, Stefan Thomas
We report on a global optimisation study of hydroxylated silica nanoclusters (SiO2)/w(H2O)(N) with sizes M = 6, 8, 10 12, and for each size with a variable number of dissociatively chemisorbed water molecules (N = 1, 2, 3...). Due to the high structural complexity of these systems and the associated ruggedness of the underlying potential energy landscape, we employ a 'cascade' global optimisation approach. Specifically, we use Monte Carlo Basin Hopping (MCBH) where for each step we employ two energy minimisations with: (i) a lightly parameterised but computationally efficient interatomic potential (IP) which does not distinguish between H-bonded conformational isomers, and then (ii) a more sophisticated IP which accounts for polarisation and H-bonding. Final energies from the MCBH search are then refined with optimisations using density functional theory. The reliability of our approach is first established via comparison with previously reported results for the (SiO2)(8).(H2O)(N) case, and then applied to the M = 6, 10 and 12 systems. For all systems studied our results follow the trend in hydroxylation energy versus N, whereby the energy gain with hydroxylation is found to level off at a point where the average tetrahedral distortion of the SiO4 centres is minimised. This optimal hydroxylation point is further found to follow an inverse power law with increasing cluster size (M) with an exponent close to -2/3, further confirming work in previous studies for other cluster sizes. (C) 2016 Elsevier B.V. All rights reserved.
Recercat. Dipósit de la Recerca de Catalunya
Publication Otros (Other)

Towards a Common Format for Computational Material Science Data

  • Ghiringhelli, Luca M.
  • Carbogno, Christian
  • Levchenko, Sergey
  • Mohamed, Fawzi
  • Huhs, Georg
  • Lüders, Martin
  • Oliveira, Micael
  • Scheffler, Matthias
Preprint arXiv:1607.04738, Information and data exchange is an important aspect of scientific progress. In computational materials science, a prerequisite for smooth data exchange is standardization, which means using agreed conventions for, e.g., units, zero base lines, and file formats. There are two main strategies to achieve this goal. One accepts the heterogeneous nature of the community which comprises scientists from physics, chemistry, bio-physics, and materials science, by complying with the diverse ecosystem of computer codes and thus develops “converters” for the input and output files of all important codes. These converters then translate the data of all important codes into a standardized, code-independent format. The other strategy is to provide standardized open libraries that code developers can adopt for shaping their inputs, outputs, and restart files, directly into the same code-independent format. We like to emphasize in this paper that these two strategies can and should be regarded as complementary, if not even synergetic. The main concepts and software developments of both strategies are very much identical, and, obviously, both approaches should give the same final result. In this paper, we present the appropriate format and conventions that were agreed upon by two teams, the Electronic Structure Library (ESL) of CECAM and the NOMAD (NOvel MAterials Discovery) Laboratory, a European Centre of Excellence (CoE). This discussion includes also the definition of hierarchical metadata describing state-of-the-art electronic-structure calculations., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 676580, The NOMAD Laboratory, a European Center of Excellence, and the BBDC (contract 01IS14013E). We thank James Kermode and Saulius Gražulis for their contribution to the discussion on the metadata, and Pasquale Pavone for precious suggestions on the metadata structure and names. We thank Patrick Rinke for carefully reading the manuscript. We thank Claudia Draxl and Kristian Thygesen for their contribution to the discussions on the necessary information to be stored for excited-state calculations and on the error bars and uncertainties. We gratefully acknowledge Damien Caliste, Fabiano Corsetti, Hubert Ebert, Jan Minar, Yann Pouillon, Thomas Ruh, David Strubbe, and Marc Torrent for their contributions to the ESCDF specifications. We acknowledge inspiring discussions with Georg Kresse, Peter Blaha, Xavier Gonze, Bernard Delley, and Jörg Hutter on the energy-zero definition and scalar-field representation. We thank Ole Andersen, Evert Jan Baerends, Peter Blaha, Lambert Colin, Bernard Delley, Thierry Deutsch, Claudia Draxl, John Kay Dewhurst, Roberto Dovesi, Paolo Giannozzi, Mike Gillan, Xavier Gonze, Michael Frisch, Martin Head-Gordon, Juerg Hutter, Klaus Koepernik, Georg Kresse, Roland Lindh, Hans Lischka, Andrea Marini, Todd Martinez, Jens Jørgen Mortensen, Frank Neese, Richard Needs, Taisuke Ozaki, Mike Payne, Angel Rubio, Trond Saue, Chris Skylaris, Jose Soler, John Stanton, James Stewart, Marat Valiev for checking the information provided in Table 1 and for useful suggestions., Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Magnetic coupling constants in three electrons three centres problems from effective Hamiltonian theory and validation of broken symmetry based approaches

  • Reta Mañeru, Daniel
  • Moreira, Ibério de Pinho Ribeiro
  • Illas i Riera, Francesc
In the most general case of three electrons in three symmetry unrelated centres with localized magnetic moments, the low energy spectrum consists of one quartet ( ) and two doublet ( , ) pure spin states. The energy splitting between these spin states can be described with the well-known Heisenberg-Dirac-Van Vleck (HDVV) model spin Hamiltonian, and their corresponding energy expressions are expressed in terms of the three different two-body magnetic coupling constants , and . However, the values of all three magnetic coupling constants cannot be extracted using the calculated energy of the three spin adapted states, since only two linearly independent energy differences between pure spin states exist. This problem has been recently investigated (JCTC 2015, 11, 3650), resulting in an alternative proposal to the original Noodleman's broken symmetry mapping approach. In the present work, this proposal is validated by means of ab initio effective Hamiltonian theory, which allows a direct extraction of all three values from the one-to-one correspondence between the matrix elements of both effective and HDVV Hamiltonian. The effective Hamiltonian matrix representation has been constructed from configuration interaction wave functions for the three spin states obtained for two model systems showing a different degree of delocalization of the unpaired electrons. These encompass a trinuclear Cu(II) complex and a -conjugated purely organic triradical
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Subsurface carbon: a general feature of noble metals

  • Piqué, Oriol
  • Koleva, Iskra Z.
  • Viñes Solana, Francesc
  • Aleksandrov, Hristiyan A.
  • Vayssilov, Georgi N.
  • Illas i Riera, Francesc
Carbon moieties on late transition metals are regarded as poisoning agents in heterogeneous catalysis. Recent studies show the promoting catalytic role of subsurface C atoms in Pd surfaces and their existence in Ni and Pt surfaces. Here energetic and kinetic evidence obtained by accurate simulations on surface and nanoparticle models shows that such subsurface C species are a general issue to consider even in coinage noble-metal systems. Subsurface C is the most stable situation in densely packed (111) surfaces of Cu and Ag, with sinking barriers low enough to be overcome at catalytic working temperatures. Low-coordinated sites at nanoparticle edges and corners further stabilize them, even in Au, with negligible subsurface sinking barriers. The malleability of low-coordinated sites is key in the subsurface C accommodation. The incorporation of C species decreases the electron density of the surrounding metal atoms, thus affecting their chemical and catalytic activity.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Performance of a modified hybrid functional in the simultaneous description of stoichiometric and reduced TiO2 polymorphs

  • Ko, Kyoung Chul
  • Lamiel Garcia, Josep Oriol
  • Lee, Jin Yong
  • Illas i Riera, Francesc
Conventional density functionals with either the local density approximation (LDA) or the generalized gradient approximation (GGA) form of the exchange-correlation potential fail to describe the electronic structure of a large number of metal oxides. Both the LDA and the GGA grossly underestimate the band gaps of these materials which severely affect the description of oxygen vacancy point defect states in reduced samples. To find a pragmatic approach to simultaneously and accurately describe the atomic and electronic structures of the most common TiO2 polymorphs, we explore the effect of the percentage of exact, non-local, Fock exchange on the electronic structure of stoichiometric rutile and anatase. From these results, a modified hybrid functional is proposed to properly describe the atomic structures, formation enthalpies and electronic structures of rutile and anatase and, at the same time, the results of reduced samples are also in good agreement with the available experimental results. The present approach can be safely used to accurately describe numerous TiO2 based materials containing defects or realistic nanoparticles for which the required large unit cells or system sizes hinder the use of GW related techniques.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Adsorption and dissociation of molecular hydrogen on orthorhombic β- Mo2C and cubic δ-MoC (001) surfaces

  • Posada Pérez, Sergio
  • Viñes Solana, Francesc
  • Valero Montero, Rosendo
  • Rodríguez, José A.
  • Illas i Riera, Francesc
Molybdenum carbides are increasingly used in heterogeneously catalyzed hydrogenation reactions, which imply the adsorption and dissociation of molecular hydrogen. Here a systematic density functional theory based study, including or excluding dispersion terms, concerning the interaction and stability of H2 with cubic δ-MoC(001) and orthorhombic β-Mo2C(001) surfaces is presented. In the latter case the two possible C or Mo terminations are considered. In addition, different situations for the H covered surfaces are examined. Computational results including dispersive forces predict as essentially spontaneous dissociation of H2 on β-Mo2C(001) independently of the surface termination, whereas on δ-MoC(001) molecular hydrogen dissociation implies a small but noticeable energy barrier. Furthermore, the ab initio thermodynamics formalism has been used to compare the stability of different H coverages. Finally, core level binding energies and vibrational frequencies are presented with the aim to assist the interpretation of yet unavailable data from X-ray photoelectron and infrared spectroscopies.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Biogas upgrading by transition metal carbides

  • Kunkel, Christian
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
The separation of carbon dioxide (CO2) from methane (CH4) is critical in biogas upgrading, requiring materials with high selectivity toward one of the two gas components. Hereby we show, by means of density functional theory based calculations including dispersive forces description, the distinct interaction of CO2 and CH4 with the most stable (001) surfaces of seven transition metal carbides (TMC; TM = Ti, Zr, Hf, V, Nb, Ta, and Mo). Transition state theory derived ad-/desorption rates suggest a very high CO2 uptake and selectivity over CH4 even at ambient temperature and low partial gas pressures.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Size dependent structural and polymorphic transitions in ZnO: from nanocluster to bulk

  • Viñes Solana, Francesc
  • Lamiel Garcia, Josep Oriol
  • Illas i Riera, Francesc
  • Bromley, Stefan Thomas
We report on an extensive survey of (ZnO)(N) nanostructures ranging from bottom-up generated nanoclusters to top-down nanoparticles cuts from bulk polymorphs. The obtained results enable us to follow the energetic preferences of structure and polymorphism in (ZnO)(N) systems with N varying between 10-1026. This size range encompasses small nanoclusters with 10s of atoms and nanoparticles with 100s of atoms, which we also compare with appropriate bulk limits. In all cases the nanostructures and bulk systems are optimized using accurate all-electron, relativistic density functional theory based calculations with numeric atom centered orbital basis sets. Specifically, sets of five families of (ZnO)(N) species are considered: single-layered and multi-layered nanocages, and bulk cut nanoparticles from the sodalite (SOD), body centered tetragonal (BCT), and wurtzite (WZ) ZnO polymorphs. Using suitable fits to interpolate and extrapolate these data allows us to assess the size-dependent energetic stabilities of each family. With increasing size our results indicate a progressive change in energetic stability from single-layered to multi-layered cage-like nanoclusters. For nanoparticles of around 2.6 nm diameter we identify a transitional region where multi-layered cages, SOD, and BCT nanostructures are very similar in energetic stability. This transition size also marks the size regime at which bottom-up nanoclusters give way to top-down bulk-cut nanoparticles. Eventually, a final crossover is found where the most stable WZ-ZnO polymorph begins to energetically dominate at N similar to 2200. This size corresponds to an approximate nanoparticle diameter of 4.7 nm, in line with experiments reporting the observation of wurtzite crystallinity in isolated ligand-free ZnO nanoparticles of 4-5 nm size or larger.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Jacob's Ladder as Sketched by Escher: assessing the performance of broadly used density functionals on transition metal surface properties

  • Vega Dominguez, Lorena
  • Ruvireta Jurado, Judit
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
The present work surveys the performance of various widely used density functional theory exchange-correlation (xc) functionals in describing observable surface properties of a total of 27 transition metals with face-centered cubic (fcc), body-centered cubic (bcc), or hexagonal close-packed (hcp) crystallographic structures. A total of 81 low Miller index surfaces were considered employing slab models. Exemplary xc functionals within the three first rungs of Jacobs ladder were considered, including the Vosko-Wilk-Nusair xc functional within the local density approximation, the Perdew-Burke-Ernzerhof (PBE) functional within the generalized gradient approximation (GGA), and the Tao-Perdew-Staroverov-Scuseria functional as a meta-GGA functional. Hybrids were excluded in the survey because they are known to fail in properly describing metallic systems. In addition, two variants of PBE were considered, PBE adapted for solids (PBEsol) and revised PBE (RPBE), aimed at improving adsorption energies. Interlayer atomic distances, surface energies, and surface work functions were chosen as the scrutinized properties. A comparison with available experimental data, including single-crystal and polycrystalline values, shows that no xc functional is best at describing all of the surface properties. However, in statistical mean terms the PBEsol xc functional is advised, while PBE is recommended when considering both bulk and surface properties. On the basis of the present results, a discussion of adapting GGA functionals to the treatment of metallic surfaces in an alternative way to meta-GGA or hybrids is provided.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Electronic structure of stoichiometric and reduced ZnO from periodic relativistic all electron hybrid density functional calculations using numeric atom-centered orbitals

  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
The atomic and electronic structure of stoichiometric and reduced ZnO wurtzite has been studied using a periodic relativistic all electron hybrid density functional (PBE0) approach and numeric atom-centered orbital basis set with quality equivalent to aug-cc-pVDZ. To assess the importance of relativistic effects, calculations were carried out without and with explicit inclusion of relativistic effects through the zero order regular approximation. The calculated band gap is ∼0.2 eV smaller than experiment, close to previous PBE0 results including relativistic calculation through the pseudopotential and ∼0.25 eV smaller than equivalent nonrelativistic all electron PBE0 calculations indicating possible sources of error in nonrelativistic all electron density functional calculations for systems containing elements with relatively high atomic number. The oxygen vacancy formation energy converges rather fast with the supercell size, the predicted value agrees with previously hybrid density functional calculations and analysis of the electronic structure evidences the presence of localized electrons at the vacancy site with a concomitant well localized peak in the density of states ∼0.5 eV above the top of the valence band and a significant relaxation of the Zn atoms near to the oxygen vacancy. Finally, present work shows that accurate results can be obtained in systems involving large supercells containing up to ∼450 atoms using a numeric atomic-centered orbital basis set within a full all electron description including scalar relativistic effects at an affordable cost.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

The contact of graphene with Ni(111) surface: description by modern dispersive forces approaches

  • Muñoz-Galán, Helena
  • Viñes Solana, Francesc
  • Gebhardt, Julian
  • Görling, Andreas
  • Illas i Riera, Francesc
Here we present a Density Functional Theory (DFT) study on the suitability of modern corrections for the inclusion of dispersion related terms (DFT-D) in treating the interaction of graphene and metal surfaces, exemplified by the graphene/Ni(111) system. The Perdew-Burke-Ernzerhof (PBE) exchange-correlation functional is used as basis, on top of which we tested the family of Grimme corrections (D2 and D3, including Becke-Jonson damping and Andersson approach) as well as different flavors of the approach by Tkatchenko and Scheffler (TS). Two experimentally observed chemisorbed states, top-fcc and bridge-top conformations, were examined, as well as one physisorbed situation, the hcp-fcc state. Geometric, energetic, and electronic properties were compared to sets of experimental data for our model system of graphene/Ni(111), but also for available data of bulk Ni, graphite, and free-standing graphene. Results show that two of the most recent approximations, the fully ab initio TS-MBD, and the semi-empirical Grimme D3 correction are best suited to describe graphene↔metal contacts, yet, comparing to earlier studies, the Rev-vdW-DF2 functional is also a good option, whereas optB86-vdW and optB88b-vdW functionals are fairly close to experimental values to be harmless used. The present results highlight how different approaches for the approximate treatment of dispersive forces yield different results, and so fine-tuning and testing of the envisioned approach for every specific system is advisable. The present survey clears the path for future accurate and affordable theoretical studies of nanotechnologic devices based on graphene-metal contacts.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Predicting core level binding energies shifts: suitability of the projector augmented wave approach as implemented in VASP

  • Pueyo Bellafont, Noèlia
  • Viñes Solana, Francesc
  • Hieringer, Wolfgang
  • Illas i Riera, Francesc
Here, we assess the accuracy of various approaches implemented in Vienna ab initio simulation package code to estimate core-level binding energy shifts (ΔBEs) using a projector augmented wave method to treat core electrons. The performance of the Perdew-Burke-Ernzerhof (PBE) and the Tao-Perdew-Staroverov-Scuseria (TPSS) exchange-correlation density functionals is examined on a dataset of 68 molecules containing B→F atoms in diverse chemical environments, accounting for 185 different 1s core level binding energy shifts, for which both experimental gas-phase X-ray photoemission (XPS) data and accurate all electron ΔBEs are available. Four procedures to calculate core-level shifts are investigated. Janak-Slater transition state approach yields mean absolute errors of 0.37 (0.21) eV at PBE (TPSS) level, similar to highly accurate all electron ΔSCF approaches using same functionals, and close to XPS experimental accuracy of 0.1 eV. The study supports the use of these procedures to assign ΔBEs of molecular moieties on material surfaces of interest in surface science, nanotechnology, and heterogeneous catalysis.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Understanding W doping in wurtzite ZnO

  • Viñes Solana, Francesc
  • Iglesias-Juez, Ana
  • Fernandez-Garcia, Marcos
  • Illas i Riera, Francesc
In the context of bandgap engineering of the ZnO photoactive material for solar harvesting applications via W doping, a number of a priori discrepant experimental observations in the literature concerning ZnO c axis expansion/contraction, bandgap red- or blue-shifting, the Zn-substitutional or interstitial nature of W atoms, or the W6+ charge compensation view with ZnO native defects are addressed by thorough density functional theory calculations on a series of bulk supercell models encompassing a large range of W contents. The present results reconcile the at first sight dissimilar observations by showing that interstitial W (Wi) is only energetically preferred over substitutional (WZn) at large large W doping concentrations; the WZn c lattice expansion can be compensated by a W triggered Zn-vacancy (VZn) c lattice contraction. The presence of WZn energetically fosters nearby VZn defects, and vice versa, up to a double VZn situation. The quantity of mono or divacancies explains the lattice contraction/expansion, and both limiting situations imply gap states which reduce the band gaps, but increase the energy gaps. Based on present results, the ZnO band gap red-shifting necessary for solar light triggered processes is achievable by W doping in Zn rich conditions.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Matildite Contact with Media: First-Principles Study of AgBiS2 Surfaces and Nanoparticle Morphology

  • Viñes Solana, Francesc
  • Konstantatos, Gerasimos
  • Illas i Riera, Francesc
Motivated by the interest in AgBiS2 material for solar light harvesting applications, a detailed bulk first-principles quantum mechanical study of its surface properties is presented. Density functional theory based calculations with the Perdew-Burke-Ernzerhof functional have been carried out for different surface orientations and terminations of the matildite polymorph. From the results, two particularly stable facets are predicted to dominate Wulff shaped AgBiS2 nanoparticles. These are the (001) type nonpolar surface and the (111) polar terminations where facets are exposed containing solely Ag or S atoms. The Wulff equilibrium shape is predicted to be a cube with only two edges capped. This particular shape explains a previously reported surface enrichment of Ag with respect to Bi of ∼1.5. The (001) surfaces display an ionic character similar to bulk AgBiS2, with a low work function of 4.31 eV, although the inspection of the density of states (DOS) reveals a bandgap increased by 0.3 eV compared to bulk. This surface effect could explain the bulk wavelength overestimation of the absorption coefficient decay, as previously determined. Last but not least, the DOS of the (111) polar termination reveals a metallic character, where Fermi level is located below that on the (001) surfaces. Possible implications of the different electronic structure of these surfaces in the reported photoactivity are discussed.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effective and highly selective CO generation from CO2 using a polycrystalline α‑Mo2C catalyst

  • Liu, Xinayun
  • Kunkel, Christian
  • Ramírez de la Piscina, Pilar
  • Homs Martí, Narcís
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
Present experiments show that synthesized polycrystalline hexagonal α-Mo2C is a highly efficient and selective catalyst for CO2 uptake and conversion to CO through the reverse water gas shift reaction. The CO2 conversion is ~16% at 673 K, with selectivity towards CO > 99%. CO2 and CO adsorption is monitored by DRIFTS, TPD, and microcalorimetry, and a series of DFT based calculations including the contribution of dispersion terms. The DFT calculations on most stable model surfaces allow for identifying numerous binding sites present on the catalyst surface, leading to a high complexity in measured and interpreted IR- and TPD-spectra. The computational results also explain ambient temperature CO2 dissociation towards CO as resulting from the presence of surface facets such as Mo2C(201)-Mo/C ¿displaying Mo and C surface atoms¿ and Mo-terminated Mo2C(001)-Mo. An ab initio thermodynamics consideration of reaction conditions however demonstrates that these facets bind CO2 and CO + O intermediates too strong for a subsequent removal, whereas the Mo2C(101)-Mo/C exhibits balanced binding properties, serving a possible explanation of the observed reactivity. In summary, results show that polycrystalline α-Mo2C is an economically viable, highly efficient, and selective catalyst for CO generation using CO2 as a feedstock.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Towards efficient data exchange and sharing for big-data driven materials science: metadata and data formats

  • Ghiringhelli, Luca M.
  • Carbogno, Christian
  • Levchenko, Sergey
  • Mohamed, Fawzi
  • Huhs, Georg
  • Lüders, Martin
  • Oliveira, Micael
  • Scheffler, Matthias
With big-data driven materials research, the new paradigm of materials science, sharing and wide accessibility of data are becoming crucial aspects. Obviously, a prerequisite for data exchange and big-data analytics is standardization, which means using consistent and unique conventions for, e.g., units, zero base lines, and file formats. There are two main strategies to achieve this goal. One accepts the heterogeneous nature of the community, which comprises scientists from physics, chemistry, bio-physics, and materials science, by complying with the diverse ecosystem of computer codes and thus develops “converters” for the input and output files of all important codes. These converters then translate the data of each code into a standardized, code-independent format. The other strategy is to provide standardized open libraries that code developers can adopt for shaping their inputs, outputs, and restart files, directly into the same code-independent format. In this perspective paper, we present both strategies and argue that they can and should be regarded as complementary, if not even synergetic. The represented appropriate format and conventions were agreed upon by two teams, the Electronic Structure Library (ESL) of the European Center for Atomic and Molecular Computations (CECAM) and the NOvel MAterials Discovery (NOMAD) Laboratory, a European Centre of Excellence (CoE). A key element of this work is the definition of hierarchical metadata describing state-of-the-art electronic-structure calculations., We thank James Kermode and Saulius Gražulis for their contribution to the discussion on the metadata, and Pasquale Pavone for precious suggestions on the metadata structure and names. We thank Patrick Rinke and Ghanshyam Pilania for carefully reading the manuscript. We thank Claudia Draxl and Kristian Thygesen for their contribution to the discussions on the necessary information to be stored for excitedstate calculations and on the error bars and uncertainties. We gratefully acknowledge Damien Caliste, Fabiano Corsetti, Hubert Ebert, Jan Minar, Yann Pouillon, Thomas Ruh, David Strubbe, and Marc Torrent for their contributions to the ESCDF specifications. We acknowledge Benjamin Regler for the development of the graphical interface for the query on the NOMAD Archive. We acknowledge inspiring discussions with Georg Kresse, Peter Blaha, Xavier Gonze, Bernard Delley, and Jörg Hutter on the energy-zero definition and scalar-field representation. We thank Ole Andersen, Evert Jan Baerends, Peter Blaha, Lambert Colin, Bernard Delley, Thierry Deutsch, Claudia Draxl, John Kay Dewhurst, Roberto Dovesi, Paolo Giannozzi, Mike Gillan, Xavier Gonze, Michael Frisch, Martin Head-Gordon, Juerg Hutter, Klaus Koepernik, Georg Kresse, Roland Lindh, Hans Lischka, Andrea Marini, Todd Martinez, Jens Jørgen Mortensen, Frank Neese, Richard Needs, Taisuke Ozaki, Mike Payne, Angel Rubio, Trond Saue, Chris Skylaris, Jose Soler, John Stanton, James Stewart, Marat Valiev for checking the information provided in Table 1 and for useful suggestions. This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 676580, The NOMAD Laboratory, a European Center of Excellence, and the BBDC (contract 01IS14013E)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Comparing the catalytic activity of the water gas shift reaction on Cu(321) and Cu(111) surfaces: step sites do not always enhance the overall reactivity

  • Prats Garcia, Hèctor
  • Gamallo Belmonte, Pablo
  • Illas i Riera, Francesc
  • Sayós Ortega, Ramón
A Density Functional Theory based first-principles kinetic Monte Carlo (kMC) study of the water gas shift reaction on the stepped Cu(321) surface is presented. We use the recently developed graph-theoretical kMC approach coupled with cluster expansion Hamiltonians to model the coverage-dependent energy barriers for the different surface processes, including adsorption/desorption, diffusion and other elementary chemical reactions, totalling 36 elementary steps, which allow two possible competitive mechanisms: redox and associative. All results are compared to a previous kMC study on Cu(111). Both mechanisms are observed for Cu(321) surface with different extension, whereas the associative one was the dominant for Cu(111). The present study shows that, in spite of encompassing lower activation energy barriers, stepped surfaces do not necessarily have an overall larger catalytic activity. Coverage effects and the significant contribution of some of the reverse processes are behind this behaviour.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

On the prediction of core level binding energies in molecules, surfaces and solids

  • Viñes Solana, Francesc
  • Sousa Romero, Carmen
  • Illas i Riera, Francesc
Core level binding energies, directly measured by X-ray photoelectron spectroscopy (XPS), provide unique information regarding the chemical environment of atoms in a given system. However, interpretation of XPS in extended systems may not be straightforward and requires assistance from theory. The different state-of-the-art theoretical methods commonly used to approach core level binding energies and their shifts with respect to a given reference are reviewed and critically assessed with special emphasis on recently developed theoretical methods and with a focus on future applications in materials and surface sciences.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Artificial-intelligence-driven discovery of catalyst genes with application to CO2 activation on semiconductor oxides

  • Mazheika, Aliaksei
  • Wang, Yang-Gang
  • Valero Montero, Rosendo
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
  • Ghiringelli, Luca M.
  • Levchenko, Sergey V.
  • Scheffler, Matthias
Catalytic-materials design requires predictive modeling of the interaction between catalyst and reactants. This is challenging due to the complexity and diversity of structure-property relationships across the chemical space. Here, we report a strategy for a rational design of catalytic materials using the artificial intelligence approach (AI) subgroup discovery. We identify catalyst genes (features) that correlate with mechanisms that trigger, facilitate, or hinder the activation of carbon dioxide (CO2) towards a chemical conversion. The AI model is trained on first-principles data for a broad family of oxides. We demonstrate that surfaces of experimentally identified good catalysts consistently exhibit combinations of genes resulting in a strong elongation of a C-O bond. The same combinations of genes also minimize the OCO-angle, the previously proposed indicator of activation, albeit under the constraint that the Sabatier principle is satisfied. Based on these findings, we propose a set of new promising catalyst materials for CO2 conversion.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Predicting size-dependent emergence of crystallinity in nanomaterials: titania nanoclusters versus nanocrystals

  • Lamiel Garcia, Josep Oriol
  • Cuko, Andi
  • Calatayud, Mònica
  • Illas i Riera, Francesc
  • Bromley, Stefan Thomas
Bottom-up and top-down derived nanoparticle structures refined by accurate ab initio calculations are used to investigate the size dependent emergence of crystallinity in titania from the monomer upwards. Global optimisation and data mining are used to provide a series of ( TiO2) N global minima candidates in the range N = 1-38, where our approach provides many new low energy structures for N > 10. A range of nanocrystal cuts from the anatase crystal structure are also considered up to a size of over 250 atoms. All nanocrystals considered are predicted to be metastable with respect to non-crystalline nanoclusters, which has implications with respect to the limitations of the cluster approach to modelling large titania nanosystems. Extrapolating both data sets using a generalised expansion of a top-down derived energy expression for nanoparticles, we obtain an estimate of the non-crystalline to crystalline crossover size for titania. Our results compare well with the available experimental results and imply that anatase-like crystallinity emerges in titania nanoparticles of approximately 2-3 nm diameter.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Assessing GW approaches for predicting core level binding energies

  • van Setten, Michiel J.
  • Costa Sala, Ramon
  • Viñes Solana, Francesc
  • Illas i Riera, Francesc
Here we present a systematic study on the performance of different GW approaches: G(0)W(0), G(0)W(0) with linearized quasiparticle equation (lin-G(0)W(0)), and quasiparticle self-consistent GW (qsGW), in predicting core level binding energies (CLBEs) on a series of representative molecules comparing to Kohn-Sham (KS) orbital energy-based results. KS orbital energies obtained using the PBE functional are 20-30 eV lower in energy than experimental values obtained from X-ray photoemission spectroscopy (XPS), showing that any Koopmans-like interpretation of KS core level orbitals fails dramatically. Results from qsGW lead to CLBEs that are closer to experimental values from XPS, yet too large. For the qsGW method, the mean absolute error is about 2 eV, an order of magnitude better than plain KS PBE orbital energies and quite close to predictions from Delta SCF calculations with the same functional, which are accurate within similar to 1 eV. Smaller errors of similar to 0.6 eV are found for qsGW CLBE shifts, again similar to those obtained using Delta SCF PBE. The computationally more affordable G(0)W(0) approximation leads to results less accurate than qsGW, with an error of similar to 9 eV for CLBEs and similar to 0.9 eV for their shifts. Interestingly, starting G(0)W(0) from PBEO reduces this error to similar to 4 eV with a slight improvement on the shifts as well (similar to 0.4 eV). The validity of the G(0)W(0) results is however questionable since only linearized quasiparticle equation results can be obtained. The present results pave the way to estimate CLBEs in periodic systems where Delta SCF calculations are not straightforward although further improvement is clearly needed.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Reliable and computationally affordable prediction of the energy gap of (TiO2)(n) (10 <= n <= 563) nanoparticles from density functional theory

  • Morales García, Ángel
  • Valero Montero, Rosendo
  • Illas i Riera, Francesc
The optical gap (Ogap) of a set of (TiO2)n nanoclusters and nanoparticles with n = 10-563 and different morphologies such as spherical, octahedral, lamellar, or tubular finite structures is investigated based on a relativistic all-electron description along with a numerical atomic centered orbital basis set. Two different functionals are used, PBE and PBEx, the former corresponds to a standard implementation of the generalized gradient approximation (GGA) and the latter to a hybrid functional with 12.5% of Fock exchange which reproduces the band gap of bulk TiO2 anatase and rutile. It is shown that the inclusion of exchange Fock in the PBE functional promotes a systematic energy gap opening of 1.25 eV relative to the PBE values. Remarkably, a linear correlation is found between PBEx and PBE Ogap calculated values with concomitant similar correlations for the HOMO and LUMO orbital energies. However, it appears that PBEx induces a larger downshift on the HOMO orbital than the upshift observed on the LUMO one. The fact that the PBEx hybrid functional was shown to reproduce the experimental energy gaps of stoichiometric and reduced TiO2 bulk phases leads to a suitable and practical way to successfully estimate Ogap of TiO2 nanoparticles containing up to thousands of atoms with PBEx precision from computationally affordable PBE calculations.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Single oxygen vacancies of (TiO2)35 as a prototype of reduced nanoparticle: implication for photocatalytic activity

  • Kim, Sunkyung
  • Ko, Kyoung Chul
  • Lee, Jin Yong
  • Illas i Riera, Francesc
Titanium dioxide (TiO2), as a semiconductor metal oxide, has been one of the most popular materials studied in the field of photocatalysis. In the present study, the properties of single oxygen vacancies of (TiO2)35, a prototype of an anatase nanoparticle, were investigated by DFT calculations. (TiO2)35 is the minimum sized model (∼2 nm) for a bipyramidal nanoparticle with anatase phase and eight {101} facets. All the available oxygen vacancies at various sites according to position, coordination number, and distance from the center atom were examined. The geometric, energetic and electronic properties of the reduced TiO2 clusters were analyzed by hybrid DFT functionals with different Hartree-Fock exchange ratios (0, 12.5 and 25%). It was found that the structure of pristine (TiO2)35 is somewhat different from the bulk lattice, with a relatively high surface to volume ratio. Moreover, the particular highly (three)-coordinated oxygen atom is energetically the most favorable for oxygen vacancy formation from the nanoparticle mainly due to its substantially high relaxation energy. TiO2 nanoparticles have low oxygen vacancy formation energy and narrow band gap because of their defect states, and can be utilized as an efficient photocatalyst material.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Matildite versus schapbachite: First-principles investigation of the origin of photoactivity in AgBiS2

  • Viñes Solana, Francesc
  • Bernechea, María
  • Konstantatos, Gerasimos
  • Illas i Riera, Francesc
Recent experiments motivated by solar light harvesting applications have brought a renewed interest in AgBiS2 as an environmentally friendly material with appealing photovoltaic properties. The lack of detailed knowledge on its bulk structural and electronic structure however inhibits further development of this material. Here we have investigated by first-principles quantum mechanical methods models of the two most commonly reported AgBiS2 crystal structures, the room temperature matildite structure, and the metastable schapbachite. Density functional theory (DFT) based calculations using the Perdew-Burke-Ernzerhof exchange-correlation (xc) functional reveal that matildite can be 0.37 eV per AgBiS2 stoichiometry unit more stable than a schapbachite structure in bulk, and that the latter, in its ordered form, may display a metallic electronic structure, precluding its use for solar light harvesting. This points out the fact that AgBiS2 nanocrystals used in solar cells should present a structure based on matildite. Matildite is found to be an indirect gap semiconductor, with an estimated band gap of ∼1.5 eV according to DFT based calculations using the more accurate hybrid xc functionals. These reveal that hole effective mass is twice that of electron effective mass, with concomitant consequences for the generated exciton. Hybrid DFT calculations also show that matildite has a high dielectric constant pertinent to that of an ionic semiconductor and slightly higher than that of PbS, a material that has been extensively used in solar cells in its nanocrystalline form. The calculated Bohr exciton radius of 4.6 nm and the estimated absorption coefficient of 10E5 cm−1 within the solar light spectrum are well in line with those experimentally reported in the literature.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Adding pieces to the CO/Pt(111) puzzle: the role of dispersion

  • Janthon, Patanachai
  • Viñes Solana, Francesc
  • Sirijaraensre, Jakkapan
  • Limtrakul, Jumras
  • Illas i Riera, Francesc
The so-called CO/Pt(111) puzzle, the experimentally demonstrated preference of CO to adsorb on the top site on the Pt(111) surface rather than the 3-fold hollow sites predicted by standard density functional theory (DFT) methods, was alleged to be solved by properly leveling the CO frontier molecular orbitals. However, the subtle energy difference between the top and hollow sites is of the same order of magnitude as the possible contribution of dispersive forces to this interaction. Herein, the role of dispersion in this system has been investigated by considering the PBE, PBEsol, RevPBE, RPBE, and SOGGA11 generalized gradient approximation (GGA) based exchange-correlation functionals; nonseparable functionals such as N12; and the TPSS and M06-L meta-GGA-type functionals, together with D2, D3, D3BJ, and MBD dispersion corrections. The results reinforce the recommendation of using M06-L for a correct description of CO adsorption-site preference even if including dispersion leads to a change of site and a noticeable overestimation of the adsorption energy indicating the presence of error-compensation effects. The present results also highlight the fact that dispersion contributes in bridging the preference gap between the top and hollow sites when other functionals are used. Dispersive forces play a role in site preference for CO on Pt(111), and it is likely that a similar situation is encountered for other late transition metals. Therefore, dispersion must be considered to reach a completely unbiased description of CO adsorption on metals. Nevertheless, including dispersion leads to adsorption energy values that overestimate the experimental value, indicating the limitations of the existing, widely used density functionals.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

On the H-2 interactions with transition metal adatoms supported on graphene: a systematic density functional study

  • Manadé, Montserrat
  • Viñes Solana, Francesc
  • Gil, Adrià
  • Illas i Riera, Francesc
The attachment of H-2 to the full set of transition metal (TM) adatoms supported on graphene is studied by using density functional theory. Methodology validation calculations on the interactions of H-2 with benzene and graphene show that any of the vdW corrections under study, the Grimme D2, D3, D3 with Becke-Jonson damping (D3BJ), and Tkatchenko-Scheffler methods, applied on the PBE functional, are similarly accurate in describing such subtle interactions, with an accuracy of almost 2 kJ mol(-1) compared to experiments. The PBE-D3 results show that H-2 physisorbs on especially stable d(5) or d(10) TMs. In other 5d metals, and the rightmost 3d and 4d ones, H-2 dissociates, and only for Y, Mn, Fe, and Zr the H-2 binds strongly enough for its storage in the so-called Kubas mode, where the H-2 bond is sensibly elongated. Other metals (Co, Ni, Ru, Rh and Pd) feature also an elongated Kubas mode, interesting as well for H-2 storage. Sc and Ti display a Kubas modes especially suited, given their lightness, for meeting the gravimetric requirements. The H-2 interactions with TM adatoms imply a TM -> H-2 charge transfer, although the magnetic moment of the system tends to remain intact, except for the early 5d TMs, where the unpaired electron transfer seems to be associated with the H-2 bond breakage.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Combining theory and experiment for multitechnique characterization of activated CO2 on transition metal carbide (001) surfaces

  • Kunkel, Christian
  • Viñes Solana, Francesc
  • Ramírez, Pedro J.
  • Rodríguez, José A.
  • Illas i Riera, Francesc
Early transition metal carbides (TMC; TM = Ti, Zr, Hf, V, Nb, Ta, Mo) with face-centered cubic crystallographic structure have emerged as promising materials for CO2 capture and activation. Density functional theory (DFT) calculations using the Perdew-Burke-Ernzerhof exchange-correlation functional evidence charge transfer from the TMC surface to CO2 on the two possible adsorption sites, namely, MMC and TopC, and the electronic structure and binding strength differences are discussed. Further, the suitability of multiple experimental techniques with respect to (1) adsorbed CO2 recognition and (2) MMC/TopC adsorption distinction is assessed from extensive DFT simulations. Results show that ultraviolet photoemission spectroscopies (UPS), work function changes, core level X-ray photoemission spectroscopy (XPS), and changes in linear optical properties could well allow for adsorbed CO2 detection. Only infrared (IR) spectra and scanning tunnelling microscopy (STM) seem to additionally allow for MMC/TopC adsorption site distinction. These findings are confirmed with experimental XPS measurements, demonstrating CO2 binding on single crystal (001) surfaces of TiC, ZrC, and VC. The experiments also help resolving ambiguities for VC, where CO2 activation was unexpected due to low adsorption energy, but could be related to kinetic trapping involving a desorption barrier. With a wealth of data reported and direct experimental evidence provided, this study aims to motivate further basic surface science experiments on an interesting case of CO2 activating materials, allowing also for a benchmark of employed theoretical models.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Diversity of adsorbed hydrogen on the TiC (001) surface at high coverages

  • Piñero Vargas, Juan José
  • Ramírez, Pedro J.
  • Bromley, Stefan Thomas
  • Illas i Riera, Francesc
  • Viñes Solana, Francesc
  • Rodríguez, José A.
The catalyzed dissociation of molecular hydrogen on the surfaces of diverse materials is currently widely studied due to its importance in a broad range of hydrogenation reactions that convert noxious exhaust products and/or greenhouse gases into added-value greener products such as methanol. In the search for viable replacements for expensive late transition metal catalysts TiC has been increasingly investigated as a potential catalyst for H2 dissociation. Here, we report on a combination of experiments and density functional theory calculations on the well-defined TiC(001) surface revealing that multiple H and H2 species are available on this substrate, with different binding configurations and adsorption energies. Our calculations predict an initial occupancy of H atoms on surface C atom sites, which then enables the subsequent stabilization of H atoms on top of surface Ti atoms. Further H2 can be also molecularly adsorbed over Ti sites. These theoretical predictions are in full accordance with information extracted from X-ray photoemission spectroscopy and temperature-programmed desorption experiments. The experimental results show that at high coverages of hydrogen there is a reconstruction of the TiC(001) surface which facilitates the binding of the adsorbate.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Properties of single oxygen vacancies on a realistic (TiO2)(84) nanoparticle: a challenge for density functionals

  • Morales García, Ángel
  • Lamiel Garcia, Josep Oriol
  • Valero Montero, Rosendo
  • Illas i Riera, Francesc
Based on all electron relativistic density functional theory calculations, the properties of single oxygen vacancies in TiO2 nanoparticles (NPs) have been obtained using a suitable representative model consisting of an octahedral (TiO2)(84) nano particle of similar to 3 nm size terminated with (101) facets. This nanoparticle can be safely considered at the onset of the so-called scalable regime where properties scale linearly with size toward bulklike limit, and hence results can be more directly compared to experiment. A set of reduced Ti84O167 nanoparticles are selected to investigate the geometric, energetic, and electronic properties by using PBE semilocal functional with three different amounts of Fock exchange: 0% (PBE), 12.5% (PBEx), and 25% (PBEO). In particular, using the PBEx hybrid functional, previously validated for bulk anatase and rutile, it is predicted that the highly (three)-coordinated oxygen atom, located in the subsurface, and the least coordinated one at top sites are energetically the most suitable candidate for generating the oxygen vacancy. The subsurface case is in line with conclusions from experiments carried out on (101) single crystal anatase surfaces. The electronic structure of the reduced particles suggests that these would have better photocatalytic activity than their stoichiometric counterparts. Nevertheless, several properties of reduced TiO2 NPs are strongly affected by the choice of the exchange-correlation functional, implying that, in absence of validation by comparison to experiment, predictions must be taken with caution.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effect of size and structure on the ground-state and excited-state electronic structure of TiO2 nanoparticles

  • Cho, Daeheum
  • Ko, Kyoung Chul
  • Lamiel Garcia, Josep Oriol
  • Bromley, Stefan Thomas
  • Lee, Jin Yong
  • Illas i Riera, Francesc
We investigated the influence of size and structure on the electronic structure of TiO2 nanoparticles 0.5-3.2 nm in diameter, in both vacuum and water, using density functional theory (DFT) calculations. Specifically, we tracked the optical and electronic energy gap of a set of (TiO2)(n) nanoparticles ranging from small non-bulklike clusters with n = 4, 8, and 16, to larger nanoparticles derived from the anatase bulk crystal with n = 35 and 84. As the difference between these two energy gaps (the exciton binding energy) becomes negligible in the bulk, this magnitude provides an indicator of the bulklike character of the electronic structure of the nanoparticles under study. Extrapolating our results to larger sizes, we obtain a rough estimate of the nanoparticle size at which the electronic structure will begin to be effectively bulklike. Our results generally confirmed that the electronic structure of the nanoparticle ground state and excited state has a more pronounced structure dependency than size dependency within a size range of 0.5-1.5 nm. We also showed that the thermodynamic preference for the photocatalytic species is the first S-1 exciton. This S-1 exciton is stable under vacuum but may evolve to free charge carriers upon structural relaxation in an aqueous environment for particles 0.5-1.5 nm in size studied in the present article. An analysis of ionization potentials and electron affinities, relative to the standard reduction potential for the water splitting half-reactions, revealed the importance of considering the structural relaxation in the excited states and the presence of water for assessing the thermodynamic conditions for photocatalytic water splitting.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Tuning transition metal carbide activity by surface metal alloying: a case study on CO2 capture and activation

  • López Berbel, Martí
  • Broderick, Luke
  • Carey, John J.
  • Viñes Solana, Francesc
  • Nolan, Michael
  • Illas i Riera, Francesc
CO2 is one of the main actors in the greenhouse effect and its removal from the atmosphere is becoming an urgent need. Thus, CO2 capture and storage (CCS) and CO2 capture and usage (CCU) are intensively investigated technologies to decrease the concentration of atmospheric CO2. Both CCS and CCU require appropriate materials to adsorb/release and adsorb/activate CO2, respectively. Recently, it has been theoretically and experimentally shown that transition metal carbides (TMC) are able to capture, store, and activate CO2. To further improve the adsorption capacity of these materials, a deep understanding of the atomic level processes involved is essential. In the present work, we theoretically investigate the possible effects of surface metal doping of these TMCs by taking TiC as a textbook case and Cr, Hf, Mo, Nb, Ta, V, W, and Zr as dopants. Using periodic slab models with large supercells and state-of-the-art density functional theory based calculations we show that CO2 adsorption is enhanced by doping with metals down a group but worsened along the d series. Adsorption sites, dispersion, and coverage appear to play a minor, secondary constant effect. The dopant-induced adsorption enhancement is highly biased by the charge rearrangement at the surface. In all cases, CO2 activation is found but doping can shift the desorption temperature by up to 135 K.