Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 53
Encontrada(s) 1 página(s)

Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Matildite Contact with Media: First-Principles Study of AgBiS2 Surfaces and Nanoparticle Morphology

  • Viñes Solana, Francesc
  • Konstantatos, Gerasimos
  • Illas i Riera, Francesc
Motivated by the interest in AgBiS2 material for solar light harvesting applications, a detailed bulk first-principles quantum mechanical study of its surface properties is presented. Density functional theory based calculations with the Perdew-Burke-Ernzerhof functional have been carried out for different surface orientations and terminations of the matildite polymorph. From the results, two particularly stable facets are predicted to dominate Wulff shaped AgBiS2 nanoparticles. These are the (001) type nonpolar surface and the (111) polar terminations where facets are exposed containing solely Ag or S atoms. The Wulff equilibrium shape is predicted to be a cube with only two edges capped. This particular shape explains a previously reported surface enrichment of Ag with respect to Bi of ∼1.5. The (001) surfaces display an ionic character similar to bulk AgBiS2, with a low work function of 4.31 eV, although the inspection of the density of states (DOS) reveals a bandgap increased by 0.3 eV compared to bulk. This surface effect could explain the bulk wavelength overestimation of the absorption coefficient decay, as previously determined. Last but not least, the DOS of the (111) polar termination reveals a metallic character, where Fermi level is located below that on the (001) surfaces. Possible implications of the different electronic structure of these surfaces in the reported photoactivity are discussed.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering vacancies in Bi2S3 yielding sub-bandgap photoresponse and highly sensitive short-wave infrared photodetectors

  • Huo, Nengjie
  • Figueroba, Alberto
  • Yang, Yujue
  • Christodoulou, Sotirios
  • Stavrinadis, Alexandros
  • Magén, César
  • Konstantatos, Gerasimos
Defects play an important role in tailoring the optoelectronic properties of materials. Here we demonstrate that sulphur vacancies are able to engineer sub-band photoresponse into the short-wave infrared range due to formation of in-gap states in Bi2S3 single crystals supported by density functional (DF) calculations. Sulfurization and subsequent refill of the vacancies results in faster response but limits the spectral range to the near infrared as determined by the bandgap of Bi2S3. A facile chemical treatment is then explored to accelerate the speed of sulphur deficient (SD)-based detectors on the order of 10 ms without sacrificing its spectral coverage into the infrared, while holding a high D* close to 10^15 Jones in the visible-near infrared range and 10^12 Jones at 1.6 um. This work also provides new insights into the role sulphur vacancies play on the electronic structure and, as a result, into sub-bandgap photoresponse enabling ultrasensitive, fast and broadband photodetectors., The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 725165), the Spanish Ministry of Economy and Competitiveness (MINECO), and the “Fondo Europeo de Desarrollo Regional” (FEDER) through grant TEC2017-88655-R. The authors also acknowledge financial support from Fundacio Privada Cellex, the program CERCA and from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522). Y.Y. acknowledges support from the National Natural Science Foundation of China under grant no. 61805045. S.C. acknowledges support from Marie Curie Standard European Fellowship (“NAROBAND”, H2020-MSCA-IF-2016-750600). Furthermore, the research leading to these results has received funding from the European Union H2020 Programme under grant agreement no. 785219 Graphene Flagship, Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Cation Disorder and Local Structural Distortions in AgxBi1–xS2 Nanoparticles

  • Kesavan, Jagadesh Kopula
  • d’Acapito, Francesco
  • Scardi, Paolo
  • Stavrinadis, Alexandros
  • Akgul, Mehmet Zafer
  • Burgués-Ceballos, Ignasi
  • Konstantatos, Gerasimos
  • Boscherini, Federico
By combining X-ray absorption fine structure and X-ray diffraction measurements with density functional and molecular dynamics simulations, we study the structure of a set of AgxBi1−xS2 nanoparticles, a materials system of considerable current interest for photovoltaics. An apparent contradiction between the evidence provided by X-ray absorption and diffraction measurements is solved by means of the simulations. We find that disorder in the cation sublattice induces strong local distortions, leading to the appearance of short Ag–S bonds, the overall lattice symmetry remaining close to hexagonal, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Single-exciton gain and stimulated emission across the infrared telecom band from robust heavily doped PbS colloidal quantum dots

  • Christodoulou, Sotirios
  • Ramiro, Iñigo
  • Othonos, Andreas
  • Özdemir, Onur
  • Dalmases Solé, Mariona|||0000-0002-4151-6586
  • Özdemir, Onur
  • Pradhan, Santanu
  • Itskos, Grigorios
  • Konstantatos, Gerasimos
Materials with optical gain in the infrared are of paramount importance for optical communications, medical diagnostics, and silicon photonics. The current technology is based either on costly III-V semiconductors that are not monolithic to silicon CMOS technology or Er-doped fiber technology that does not make use of the full fiber transparency window. Colloidal quantum dots (CQDs) offer a unique opportunity as an optical gain medium in view of their tunable bandgap, solution processability, and CMOS compatibility. The 8-fold degeneracy of infrared CQDs based on Pb-chalcogenides has hindered the demonstration of low-threshold optical gain and lasing, at room temperature. We demonstrate room-temperature, infrared, size-tunable, band-edge stimulated emission with a line width of ~14 meV. Leveraging robust electronic doping and charge-exciton interactions in PbS CQD thin films, we reach a gain threshold at the single exciton regime representing a 4-fold reduction from the theoretical limit of an 8-fold degenerate system, with a net modal gain in excess of 100 cm-1., The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 725165), the Spanish Ministry of Economy and Competitiveness (MINECO), and the ‘Fondo Europeo de Desarrollo Regional’ (FEDER) through grant TEC2017- 88655-R. The authors also acknowledge financial support from Fundacio Privada Cellex, the program CERCA, and from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522). S.C. acknowledges support from a Marie Curie Standard European Fellowship (NAROBAND, H2020-MSCA-IF-2016-750600). I.R. acknowledges support from the Ministerio de Economiá , Industria y Competitividad of Spain via a Juan de la Cierva fellowship. We are also thankful to Dr. Kaifen Wu for fruitful discussions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Environmentally friendly AgBiS2 nanocrystal inks for efficient solar cells employing green solvent processing

  • Wang, Yongjie
  • Peng, Lucheng
  • Wang, Zhuoran
  • Konstantatos, Gerasimos
Silver bismuth sulfide nanocrystals (AgBiS2 NCs) are emerging absorber materials for low-cost solar cells, owing to their solution-processability, environmentally friendliness, earth abundance, and high absorption coefficients. When it comes to green manufacturing technologies, besides the semiconductor materials, solvents play an equally important role. Here, solution-phase ligand-exchanged (SPLE) AgBiS2 nanocrystal inks employing 3-mercaptopropionic (MPA) in methanol as a ligand solution are introduced. The resultant MPA capped AgBiS2 nanocrystals can be fully dissolved in water, forming completely environmentally friendly nanocrystal inks. These nanocrystal inks allow the fabrication of fully green-processed photovoltaic devices with a power conversion efficiency up to 7.3%. This method not only demonstrates the potential of solution-phase ligand-exchanged AgBiS2 nanocrystal inks, but also paves a path toward fully green-processed nanocrystal devices., The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 725165) and the Fundació Joan Ribas Araquistain (FJRA). This project was supported also by Fundació Privada Cellex, the program CERCA, EQC2019-005797-P (AEI/FEDER UE), 2017SGR1373 and “Severo ochoa” Center of Excellence CEX2019-000910-S – Funded by the Spanish State Research Agency. Y.W. acknowledges the support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754558. Z.W. acknowledges the support from the Marie Sklodowska-Curie Individual Fellowship (SUSNASOL, grant agreement No. 886953)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Suppressing Deep Traps in PbS Colloidal Quantum Dots via Facile Iodide Substitutional Doping for Solar Cells with Efficiency >10%

  • Stavrinadis, Alexandros
  • Pradhan, Santanu
  • Papagiorgis, Paris
  • Itskos, Grigorios
  • Konstantatos, Konstantatos
Surface passivation of PbS colloidal quantum dots (QDs) with iodide has been used in highly efficient solar cells. Iodide passivation is typically achieved by ligand exchange processes on QD films. Complementary to this approach, herein we present a non-intrusive solution-based strategy for doping QDs with iodide to further optimize solar cell performance. The doping step is applied in-situ at the end of the synthesis of the QDs. The optimum precursor I/Pb ratio is found to be in the 1.5-3% range at which iodide substitutes S without excessively altering the dots´ surface chemistry. This allows for band engineering and decreasing the density of deep trap states of the QDs which taken together lead to PbS QD solar cells with efficiency in excess of 10%., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Solid-State Thin-Film Broadband Short-Wave Infrared Light Emitters

  • Pradhan, Santanu
  • Dalmases, Mariona
  • Konstantatos, Gerasimos
Solid-state broadband light emitters in the visible have revolutionized today's lighting technology achieving compact footprints, flexible form factors, long lifetimes, and high energy saving, although their counterparts in the infrared are still in the development phase. To date, broadband emitters in the infrared have relied on phosphor-downconverted light emitters based on atomic optical transitions in transition metal or rare earth elements in the phosphor layer resulting in limited spectral bandwidths in the near-infrared and preventing their integration into electrically driven light-emitting diodes (LEDs). Herein, phosphor-converted LEDs based on engineered stacks of multi-bandgap colloidal quantum dots (CQDs) are reported as a novel class of broadband emitters covering a broad short-wave infrared (SWIR) spectrum from 1050–1650 nm with a full-width-half-maximum of 400 nm, delivering 14 mW of optical power with a quantum efficiency of 5.4% and power conversion efficiency of 13%. Leveraging the electrical conductivity of the CQD stacks, further, the first broadband SWIR-active LED is demonstrated, paving the way toward complementary metal–oxide–semiconductor integrated broadband emitters for on-chip spectrometers and low-cost volume manufacturing. SWIR spectroscopy is employed to illustrate the practical relevance of the emitters in food and material identification case studies., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Mid- and long-wave infrared optoelectronics via intraband transitions in PbS Colloidal Quantum Dots

  • Özdemir, Onur
  • Konstantatos, Gerasimos
  • Ramiro, Iñigo
  • Christodoulou, Sotirios
  • Gupta, Shuchi
  • Dalmases, Mariona
  • Torre, Iacopo|||0000-0001-6515-181X
Optical sensing in the mid- and long-wave infrared (MWIR, LWIR) is of paramount importance for a large spectrum of applications including environmental monitoring, gas sensing, hazard detection, food and product manufacturing inspection, and so forth. Yet, such applications to date are served by costly and complex epitaxially grown HgCdTe quantum-well and quantum-dot infrared photodetectors. The possibility of exploiting low-energy intraband transitions make colloidal quantum dots (CQD) an attractive low-cost alternative to expensive low bandgap materials for infrared applications. Unfortunately, fabrication of quantum dots exhibiting intraband absorption is technologically constrained by the requirement of controlled heavy doping, which has limited, so far, MWIR and LWIR CQD detectors to mercury-based materials. Here, we demonstrate intraband absorption and photodetection in heavily doped PbS colloidal quantum dots in the 5-9 µm range, beyond the PbS bulk band gap, with responsivities on the order of 10-4 A/W at 80 K. We have further developed a model based on quantum transport equations to understand the impact of electron population of the conduction band in the performance of intraband photodetectors and offer guidelines toward further performance improvement., I.R. acknowledges support from the Ministerio de Economiá , Industria y Competitividad of Spain via a Juan de la Cierva fellowship. The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant Agreement 725165), the Spanish Ministry of Economy and Competitiveness (MINECO), and the “Fondo Europeo de Desarrollo Regional” (FEDER) through Grant TEC2017- 88655-R. The authors also acknowledge financial support from Fundacio Privada Cellex, the program CERCA and from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522). S.C. acknowledge support from a Marie Curie Standard European Fellowship (“NAROBAND”, H2020-MSCA-IF-2016-750600)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Ag2ZnSnS4 Nanocrystals Expand the Availability of RoHS Compliant Colloidal Quantum Dots

  • Saha, Avijit
  • Figueroba, Alberto
  • Konstantatos, Gerasimos
The demonstration of the quantum confinement effect in colloidal quantum dots (QDs) has been extensively studied and exploited mainly in Pb and Cd chalcogenide systems. There has been an urgent need recently for the development of non(less)-toxic colloidal QDs to warrant compliance with current safety regulations (Restriction of Hazardous Substances (RoHS) Directive 2002/95/ EC). Herein, we report Pb/Cd-free, solution processed luminescent Ag2ZnSnS4 (AZTS) colloidal QDs. We present a selective and controlled amine and thiol-free synthesis of air stable luminescent AZTS QDs by the hot injection technique. By controlling the reaction conditions we obtain controlled size variation and demonstrate the quantum confinement effect that is in good agreement with the theoretically calculated values. The band gap of the AZTS QDs is size-tunable in the near-infrared from 740 to 850 nm. Finally, we passivate the surface with Zn-oleate, which yields higher quantum yield (QY), longer lifetime, and better colloidal stability
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

High Efficiency Colloidal Quantum Dot Infrared Light Emitting Diodes via Engineering at the Supra-Nanocrystalline Level

  • Pradhan, Santanu
  • DiStasio, Francesco
  • Bi, Yu
  • Gupta, Shuchi
  • Christodoulou, Sotirios
  • Stavrinadis, Alexandros
  • Konstantatos, Gerasimos
Colloidal quantum dot (CQD) light-emitting diodes (LEDs) deliver a compelling performance in the visible, yet infrared CQD LEDs underperform their visible-emitting counterparts, largely due to their low photoluminescence quantum efficiency. Here we employ a ternary blend of CQD thin film that comprises a binary host matrix that serves to electronically passivate as well as to cater for an efficient and balanced carrier supply to the emitting quantum dot species. In doing so, we report infrared PbS CQD LEDs with an external quantum efficiency of ~7.9% and a power conversion efficiency of ~9.3%, thanks to their very low density of trap states, on the order of 1014 cm−3, and very high photoluminescence quantum efficiency in electrically conductive quantum dot solids of more than 60%. When these blend devices operate as solar cells they deliver an open circuit voltage that approaches their radiative limit thanks to the synergistic effect of the reduced trap-state density and the density of state modification in the nanocomposite., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Ag2ZnSnS4 Nanocrystals Expand the Availability of RoHS Compliant Colloidal Quantum Dots

  • Saha, Avijit
  • Figueroba, Alberto
  • Konstantatos, Gerasimos
The demonstration of the quantum confinement effect in colloidal quantum dots (QDs) has been extensively studied and exploited mainly in Pb and Cd chalcogenide systems. There has been an urgent need recently for the development of non(less)-toxic colloidal QDs to warrant compliance with current safety regulations (Restriction of Hazardous Substances (RoHS) Directive 2002/95/EC). Herein, we report Pb/Cd-free, solution processed luminescent Ag2ZnSnS4 (AZTS) colloidal QDs. We present a selective and controlled amine and thiol-free synthesis of air stable luminescent AZTS QDs by the hot injection technique. By controlling the reaction conditions we obtain controlled size variation and demonstrate the quantum confinement effect that is in good agreement with the theoretically calculated values. The band gap of the AZTS QDs is size-tunable in the near-infrared from 740 to 850 nm. Finally, we passivate the surface with Zn-oleate, which yields higher quantum yield (QY), longer lifetime, and better colloidal stability., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Infrared Solution‐Processed Quantum Dot Solar Cells Reaching External Quantum Efficiency of 80% at 1.35 µm and Jsc in Excess of 34 mA cm−2

  • Bi, Yu
  • Pradhan, Santanu
  • Gupta, Shuchi
  • Akgul, Mehmet Zafer
  • Stavrinadis, Alexandros
Developing low‐cost photovoltaic absorbers that can harvest the short‐wave infrared (SWIR) part of the solar spectrum, which remains unharnessed by current Si‐based and perovskite photovoltaic technologies, is a prerequisite for making high‐efficiency, low‐cost tandem solar cells. Here, infrared PbS colloidal quantum dot (CQD) solar cells employing a hybrid inorganic–organic ligand exchange process that results in an external quantum efficiency of 80% at 1.35 µm are reported, leading to a short‐circuit current density of 34 mA cm−2 and a power conversion efficiency (PCE) up to 7.9%, which is a current record for SWIR CQD solar cells. When this cell is placed at the back of an MAPbI3 perovskite film, it delivers an extra 3.3% PCE by harnessing light beyond 750 nm., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Reducing Interface Recombination through Mixed Nanocrystal Interlayers in PbS Quantum Dot Solar Cells

  • Pradhan, Santanu
  • Stavrinadis, Alexandros
  • Gupta, Shuchi
  • Konstantatos, Gerasimos
The performance of ZnO/PbS colloidal quantum dot (CQD)-based heterojunction solar cells is hindered by charge carrier recombination at the heterojunction interface. Reducing interfacial recombination can improve charge collection and the photocurrent of the device. Here we report the use of a mixed nanocrystal (MNC) buffer layer comprising zinc oxide nanocrystals and lead sulfide quantum dots at the respective heterojunction interface. Remote trap passivation of the PbS CQDs taking place within this MNC layer reduces interfacial recombination and electron back transfer which in turn improves charge collection efficiency. Upon the addition of the MNC layer, the overall power conversion efficiency increases from 9.11 to 10.16% and Short-circuit current density (JSC) increases from 23.54 to 25.23 mA/cm2. Optoelectronic characterization of the solar cells confirms that the effects underlying device improvement are reduced trap density and improved charge collection efficiency due to the presence of the MNC buffer layer., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Colloidal AgBiS2 nanocrystals with reduced recombination yield 6.4% power conversion efficiency in solution-processed solar cells

  • Burgués-Ceballos, Ignasi
  • Wang, Yongjie
  • Akgul, M. Zafer
  • Konstantatos, Gerasimos
AgBiS2 nanocrystals have recently emerged as a RoHS compliant material for photovoltaics. This heavy-metal-free ternary chalcogenide can be prepared from earth-abundant precursors, is solution-processable and presents a high absorption coefficient as well as a suitable bandgap for solar cell applications. However, the full potential of AgBiS2 nanocrystals is yet to be realised; the highest efficiencies reported so far used very thin (~35 nm) absorbing layers due to the limited carrier transport and trap-assisted recombination that hinder the performance of thicker layers. In this work we implement a synthetic route to obtain larger size colloidal AgBiS2 nanocrystals, which in turn allows to fabricate thin film solar cells with higher mobility and reduced trap-assisted recombination, resulting in a power conversion efficiency of 6.4%, due to a photocurrent increase of 4 mA/cm2 compared to prior reports. We conclude by discussing on the main current challenges underpinning the photovoltaic performance of this material as well as strategies to further reduce the voltage and photocurrent losses., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Colloidal synthesis of lead-free Cs2TiBr6−xIx perovskite nanocrystals

  • Liga, Shanti Maria
  • Konstantatos, Gerasimos
Cesium titanium halide perovskites are novel lead-free optoelectronic materials that have attracted attention in the last two years for their application in solar cells with power conversion efficiencies reaching 3.3%. We report here the first colloidal synthesis of pure and mixed bromide–iodide cesium titanium perovskite nanocrystals with a bandgap tunable from 2.3 eV to 1.2 eV., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Size- and temperature-dependent intraband optical properties of heavily n-doped PbS colloidal quantum dot solid-state films

  • Ramiro, Iñigo
  • Kundu, Biswajit
  • Dalmases, Mariona
  • Özdemir, Onur
  • Pedrosa, María
  • Konstantatos, Gerasimos
Steady-state access to intraband transitions in colloidal quantum dots (CQDs), via heavy doping, allows exploiting the electromagnetic spectrum at energies below the band gap. CQD intraband optoelectronics opens up a new path to cheap mid- and long-wavelength infrared photodetectors and light-emitting devices, which today employ mostly epitaxial materials. As a recent field of experimental research, thorough studies of the basic properties of intraband transitions in CQDs are still lacking. In this work, we investigate the size and temperature dependence of the intraband transition in heavily n-doped PbS quantum dot (QD) films. We measure the absorption coefficient of the intraband transition to be in the order of $10^4$ cm$^{-1}$, which is comparable to the value of the interband absorption coefficient. Additionally, we determine the size-dependence of the oscillator strength of the intraband transition. We demonstrate a negative dependence of the intraband energy with temperature, in contrast to the positive dependence of the interband transition., We thank Dr. Iacopo Torre for helpful discussions. The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 725165), the Spanish Ministry of Economy and Competitiveness (MINECO), and the “Fondo Europeo de Desarrollo Regional” (FEDER) through grant TEC2017-88655-R. The authors also acknowledge financial support from Fundacio Privada Cellex, the program CERCA and from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centres of Excellence, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Ag2ZnSnS4–ZnS core–shell colloidal quantum dots: a near-infrared luminescent material based on environmentally friendly elements

  • Saha, Avijit
  • Konstantatos, Gerasimos
Low cost, multinary colloidal quantum dots (QDs) based on environmentally friendly elements, with bright, narrow-width, tunable near-infrared (NIR) luminescence are promising alternatives to Cd and Pb chalcogenide QDs for in vivo bio-imaging, LED and sensing applications. Herein, we demonstrate Pb/Cd free solution-processed colloidal luminescent Ag2ZnSnS4–ZnS (AZTS–ZnS) core–shell QDs with precise control over the ZnS shell thickness and thereby its optical properties. Unlike indium based multinary (I–III–VI group) core–shell QDs these nanocrystals show a narrow photoluminescence (PL) full width at half maximum (fwhm) of 105–110 meV in the first NIR window. By monitoring the starting AZTS core size, we achieve tunable emission over a small NIR window in these QDs with the best PL quantum yield (PLQY) of 17.4%., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Highly efficient, ultrathin, Cd-free kesterite solar cells in superstrate configuration enabled by band level tuning via Ag incorporation

  • Wang, Zhuoran
  • Wang, Yongjie
  • Konstantatos, Gerasimos
Kesterite, or Cu2ZnSn(S,Se)4 (CZTS) is promising in developing sustainable PV technology due to its earth-abundant, non-toxic composition. However, issues including instability of interface, high density of defects that fails to allow the short charge-collection length to meet its light absorption needs, use of Cd that fails to comply with the restriction of hazardous substances (RoSH), are promoting the development of alternative, eco-friendly device structure. Here, this study reports an important progress on this subject by adopting the superstrate configuration to kesterite, thus to realize advantageous light management and high defect tolerance in an ultrathin device. By incorporating Ag in kesterite to overcome the detrimental alignment at the pristine interface, a solar cell with PCE of 8.1% has been fabricated with ~ 200 nm absorber and ~ 15 nm TiO2 buffer, representing a PCE improvement of nearly three-fold from the baseline Cu2ZnSn(S,Se)4 device and breaking the 5% PCE limit for superstrate kesterite cells to date. Moreover, this enables the sole use of TiO2 as novel buffer material free of toxic Cd. Further analysis reveals the critical role of Ag in synergistically tailoring band offset and bandgap, along with largely reduced density of defects, leading to this substantial performance improvement., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

High-Efficiency Light-Emitting Diodes Based on Formamidinium Lead Bromide Nanocrystals and solution processed transport layers

  • Stasio, Francesco Di
  • Ramiro, Íñigo
  • Bi, Yu
  • Christodoulou, Sotirios
  • Stavrinadis, Alexandros
  • Konstantatos, Gerasimos
Perovskite nanocrystal light-emitting diodes (LEDs) employing architecture comprising a ZnO nanoparticles electron-transport layer and a conjugated polymer hole-transport layer have been fabricated. The obtained LEDs demonstrate a maximum external-quantum-efficiency of 6.04%, luminance of 12998 Cd/m2 and stable electroluminescence at 519 nm. Importantly, such high efficiency and bright-ness have been achieved by employing solution processed transport layers, formamidinium lead bromide nanocrystals (CH(NH2)2PbBr3 NCs) synthesized at room-temperature and in air without the use of a Schlenk line, and a procedure based on atomic layer deposition to insolubilize the NC film. The obtained NCs show a photoluminescence quantum yield of 90% that is retained upon film fabrication. The results show that perovskite NC LEDs can achieve high-performance without the use of transport layers deposited through evaporation in ultra-high-vacuum., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Cation disorder engineering yields AgBiS2 nanocrystals with enhanced optical absorption for efficient ultrathin solar cells

  • Wang, Yongjie
  • Kavanagh R., Seán
  • Burgués-Ceballos, Ignasi
  • Walsh, Aron
  • Scanlon O., David
  • Konstantatos, Gerasimos
Strong optical absorption by a semiconductor is a highly desirable property for many optoelectronic and photovoltaic applications. The optimal thickness of a semiconductor absorber is primarily determined by its absorption coefficient. To date, this parameter has been considered as a fundamental material property, and efforts to realize thinner photovoltaics have relied on light-trapping structures that add complexity and cost. Here we demonstrate that engineering cation disorder in a ternary chalcogenide semiconductor leads to considerable absorption increase due to enhancement of the optical transition matrix elements. We show that cation-disorder-engineered AgBiS2 colloidal nanocrystals offer an absorption coefficient that is higher than other photovoltaic materials, enabling highly efficient extremely thin absorber photovoltaic devices. We report solution-processed, environmentally friendly, 30-nm-thick solar cells with short-circuit current density of 27¿mA¿cm-2, a power conversion efficiency of 9.17% (8.85% certified) and high stability under ambient conditions., G.K. acknowledges financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 725165), the Fundació Joan Ribas Araquistain (FJRA), the Fundació Privada Cellex, the program CERCA, EQC2019-005797-P (AEI/FEDER UE), 2017SGR1373 and ‘Severo Ochoa’ Centre of Excellence CEX2019-000910-S funded by the Spanish State Research Agency. Y.W. acknowledges support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 754558. I.B.-C. acknowledges support from the Government of Catalonia’s Beatriu de Pinós postdoctoral programme (grant no. 2017BP00241). S.R.K. thanks L. Harnett-Caulfield for help with using the alloy theoretic automated toolkit software package and Y.-S. Choi for help with calculating the Madelung potentials; he also acknowledges the EPSRC Centre for Doctoral Training in the Advanced Characterisation of Materials (CDT-ACM) (EP/S023259/1) for funding a PhD studentship. A.W. and D.O.S. acknowledge the use of the UCL Kathleen High Performance Computing Facility (Kathleen@UCL), the Imperial College Research Computing Service and associated support services. By the membership of the UK’s HEC Materials Chemistry Consortium, which is funded by the EPSRC (EP/L000202, EP/R029431 and EP/T022213), this work used the ARCHER2 UK National Supercomputing Service and the UK Materials and Molecular Modelling (MMM) Hub (Thomas EP/P020194 and Young EP/T022213). D.O.S. acknowledges support from the EPSRC (EP/N01572X/1) and the European Research Council, ERC (grant no. 758345)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Low-Cost RoHS Compliant Solution Processed Photovoltaics Enabled by Ambient Condition Synthesis of AgBiS2 Nanocrystals

  • Akgul, M. Zafer
  • Figueroba, Alberto
  • Pradhan, Santanu
  • Bi, Yu
  • Konstantatos, Gerasimos
Two major challenges exist before colloidal nanocrystal solar cells can take their place in the market: So far, these devices are based on Pb/Cd-containing nanocrystals, and second, the synthesis of these nanocrystals takes place in an inert atmosphere at elevated temperatures due to the use of air-sensitive chemicals. In this report, a room-temperature, ambient-air synthesis for nontoxic AgBiS2 nanocrystals is presented. As this method utilizes stable precursors, the need for the use of a protective environment is eliminated, enabling the large-scale production of AgBiS2 nanocrystals. The production cost of AgBiS2 NCs at room temperature and under ambient conditions reduces by ∼60% compared to prior reports based on hot injection, and the solar cells made of these nanocrystals yield a promising power conversion efficiency (PCE) of 5.5%, the highest reported to date for a colloidal nanocrystal material free of Pb or Cd synthesized at room temperature and under ambient conditions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Trap-state suppression and improved charge transport in PbS quantum dot solar cells with synergistic mixed ligand treatments

  • Pradhan, Santanu
  • Stavrinadis, Alexandros
  • Gupta, Shuchi
  • Bi, Yu
  • Stasio, Francesco Di
  • Konstantatos, Gerasimos
The power conversion efficiency of colloidal PbS‐quantum‐dot (QD)‐based solar cells is significantly hampered by lower‐than‐expected open circuit voltage (VOC). The VOC deficit is considerably higher in QD‐based solar cells compared to other types of existing solar cells due to in‐gap trap‐induced bulk recombination of photogenerated carriers. Here, this study reports a ligand exchange procedure based on a mixture of zinc iodide and 3‐mercaptopropyonic acid to reduce the VOC deficit without compromising the high current density. This layer‐by‐layer solid state ligand exchange treatment enhances the photovoltaic performance from 6.62 to 9.92% with a significant improvement in VOC from 0.58 to 0.66 V. This study further employs optoelectronic characterization, X‐ray photoelectron spectroscopy, and photoluminescence spectroscopy to understand the origin of VOC improvement. The mixed‐ligand treatment reduces the sub‐bandgap traps and significantly reduces bulk recombination in the devices., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Breaking the Open-Circuit Voltage Deficit Floor in PbS Quantum Dot Solar Cells through Synergistic Ligand and Architecture Engineering

  • Pradhan, Santanu
  • Stavrinadis, Alexandros
  • Gupta, Shuchi
  • Christodoulou, Sotirios
  • Konstantatos, Gerasimos
To realize the full potential of colloidal quantum dot (CQD) based solar cells, it is important to address the issue of large open-circuit voltage (VOC) deficit which is a major roadblock in reaching higher efficiencies. The origin of the VOC deficit in these solar cells lies primarily in the presence of sub-bandgap trap states of the QDs. Here, we present a synergistic engineering framework to passivate these sub-bandgap states in PbS QDs through chemical surface passivation and remote passivation exploiting ligand and architecture engineering. In particular, we form bulk nanoheterojunctions (BNH) by mixing PbS QDs with ZnO nanocrystals in conjunction with mixed ligand treatments to passivate surface traps. We employ the mixed ligand system of zinc iodide and 3-mercatopropyonic acid to leverage the benefits of both organic and inorganic ligands for surface passivation and improved charge transport. This mixed ligand treatment in BNH architectures leads to record low VOC deficit for PbS QDs of 0.4–0.55 V compared to previously reported 0.6–0.8 V for the range of 1.1–1.35 eV bandgap PbS QDs., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Hybrid 2D-QD MoS2–PbSe quantum dot broadband photodetectors with high-sensitivity and room-temperature operation at 2.5 µm

  • Kundu, Biswajit
  • Özdemir, Onur
  • Dalmases Solé, Mariona|||0000-0002-4151-6586
  • Konstantatos, Gerasimos
  • Kumar, Gaurav
Broadband infrared photodetectors have profound importance in diverse applications including security, gas sensing, bioimaging, spectroscopy for food quality, and recycling, just to name a few. Yet, these applications can currently be served by expensive epitaxially grown photodetectors, limiting their market potential and social impact. The use of colloidal quantum dots (CQDs) and 2D materials in a hybrid layout is an attractive alternative to design low-cost complementary metal-oxide-semiconductor (CMOS) compatible infrared photodetectors. However, the spectral sensitivity of these conventional hybrid detectors is restricted to 2.1 µm. Herein, a hybrid structure comprising molybdenum disulfide (MoS2) with lead selenide (PbSe) CQDs is presented to extend their sensitivity further toward the mid-wave infrared, up to 3 µm. A room-temperature responsivity of 137.6 A/W and a detectivity of 7.7 × 10^10 Jones are achieved at 2.55 µm owing to highly efficient photoexcited carrier separation at the interface of MoS2 and PbSe in combination with an oxide coating to reduce dark current; the highest value is yet for a PbSe-based hybrid device. These findings strongly support the successful fabrication of hybrid devices, which may pave the pathway for cost-effective, high-performance, next-generation, novel photodetectors., The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research (grant agreement no. 725165) as well as Graphene Flagship under Grant Agreement Nr. 881603 (Core3). The authors also acknowledge financial support from the Spanish Ministry of Economy and Competitiveness (MINECO), and the “Fondo Europeo de Desarrollo Regional” (FEDER) through grant TEC2017-88655-R, from the Spanish State Research Agency through the “Severo Ochoa” program for Centers of Excellence in R&D (CEX2019-000910-S), from Fundació Cellex, Fundació Mir-Puig, and from Generalitat de Catalunya through the CERCA program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Mixed AgBiS2 nanocrystals for photovoltaics and photodetectors

  • Burgués-Ceballos, Ignasi
  • Wang, Yongjie
  • Konstantatos, Gerasimos
Heavy-metal-free colloidal nanocrystals are gaining due attention as low-cost, semiconducting materials for solution-processed optoelectronic applications. One common limitation of such materials is their limited carrier transport and trap-assisted recombination, which impede the performance of thick photoactive layers. Here we mix small-size and large-size AgBiS2 nanocrystals to judiciously favour the band alignment in photovoltaic and photodetector devices. The absorbing layer of these devices is fabricated in a gradient fashion in order to maximise charge transfer and transport. We implement this strategy to fabricate mixed AgBiS2 thin film solar cells with a power conversion of 7.3%, which significantly surpasses the performance of previously reported devices based on single-batch AgBiS2 nanocrystals. Additionally, this approach allows us to fabricate devices using thicker photoactive layers that show lower dark currents and external quantum efficiencies exceeding 40% over a broad bandwidth – covering the visible and near infrared range beyond 1 μm, thus unleashing the potential of colloidal AgBiS2 nanocrystals in photodetector applications., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Matildite Contact with Media: First-Principles Study of AgBiS2 Surfaces and Nanoparticle Morphology

  • Viñes, Francesc
  • Konstantatos, Gerasimos
  • Illas, Francesc
Motivated by the interest in AgBiS2 material for solar light harvesting applications, a detailed bulk first-principles quantum mechanical study of its surface properties is presented. Density functional theory based calculations with the Perdew–Burke–Ernzerhof functional have been carried out for different surface orientations and terminations of the matildite polymorph. From the results, two particularly stable facets are predicted to dominate Wulff shaped AgBiS2 nanoparticles. These are the (001) type nonpolar surface and the (111) polar terminations where facets are exposed containing solely Ag or S atoms. The Wulff equilibrium shape is predicted to be a cube with only two edges capped. This particular shape explains a previously reported surface enrichment of Ag with respect to Bi of ∼1.5. The (001) surfaces display an ionic character similar to bulk AgBiS2, with a low work function of 4.31 eV, although the inspection of the density of states (DOS) reveals a bandgap increased by 0.3 eV compared to bulk. This surface effect could explain the bulk wavelength overestimation of the absorption coefficient decay, as previously determined. Last but not least, the DOS of the (111) polar termination reveals a metallic character, where Fermi level is located below that on the (001) surfaces. Possible implications of the different electronic structure of these surfaces in the reported photoactivity are discussed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Cation disorder engineering yields AgBiS2 nanocrystals with enhanced optical absorption for efficient ultrathin solar cells

  • Wang, Yongjie
  • Kavanagh, Seán R.
  • Burgués-Ceballos, Ignasi
  • Walsh, Aron
  • Scanlon, David O.
  • Konstantatos, Gerasimos
Strong optical absorption by a semiconductor is a highly desirable property for many optoelectronic and photovoltaic applications. The optimal thickness of a semiconductor absorber is primarily determined by its absorption coefficient. To date, this parameter has been considered as a fundamental material property, and efforts to realize thinner photovoltaics have relied on light-trapping structures that add complexity and cost. Here we demonstrate that engineering cation disorder in a ternary chalcogenide semiconductor leads to considerable absorption increase due to enhancement of the optical transition matrix elements. We show that cation-disorder-engineered AgBiS2 colloidal nanocrystals offer an absorption coefficient that is higher than other photovoltaic materials, enabling highly efficient extremely thin absorber photovoltaic devices. We report solution-processed, environmentally friendly, 30-nm-thick solar cells with short-circuit current density of 27 mA cm−2, a power conversion efficiency of 9.17% (8.85% certified) and high stability under ambient conditions., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Mid- and long-wave infrared optoelectronics via intraband transitions in PbS Colloidal Quantum Dots

  • Özdemir, Onur
  • Konstantatos, Gerasimos
  • Ramiro, Iñigo
  • Christodoulou, Sotirios
  • Gupta, Shuchi
  • Dalmases, Mariona
  • Torre, Iacopo
Optical sensing in the mid- and long-wave infrared (MWIR, LWIR) is of paramount importance for a large spectrum of applications including environmental monitoring, gas sensing, hazard detection, food and product manufacturing inspection, and so forth. Yet, such applications to date are served by costly and complex epitaxially grown HgCdTe quantum-well and quantum-dot infrared photodetectors. The possibility of exploiting low-energy intraband transitions make colloidal quantum dots (CQD) an attractive low-cost alternative to expensive low bandgap materials for infrared applications. Unfortunately, fabrication of quantum dots exhibiting intraband absorption is technologically constrained by the requirement of controlled heavy doping, which has limited, so far, MWIR and LWIR CQD detectors to mercury-based materials. Here, we demonstrate intraband absorption and photodetection in heavily doped PbS colloidal quantum dots in the 5-9 µm range, beyond the PbS bulk band gap, with responsivities on the order of 10-4 A/W at 80 K. We have further developed a model based on quantum transport equations to understand the impact of electron population of the conduction band in the performance of intraband photodetectors and offer guidelines toward further performance improvement., I.R. acknowledges support from the Ministerio de Economiá , Industria y Competitividad of Spain via a Juan de la Cierva fellowship. The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant Agreement 725165), the Spanish Ministry of Economy and Competitiveness (MINECO), and the “Fondo Europeo de Desarrollo Regional” (FEDER) through Grant TEC2017- 88655-R. The authors also acknowledge financial support from Fundacio Privada Cellex, the program CERCA and from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522). S.C. acknowledge support from a Marie Curie Standard European Fellowship (“NAROBAND”, H2020-MSCA-IF-2016-750600)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Colloidal synthesis of lead-free Cs2TiBr6−xIx perovskite nanocrystals

  • Liga, Shanti Maria
  • Konstantatos, Gerasimos
Cesium titanium halide perovskites are novel lead-free optoelectronic materials that have attracted attention in the last two years for their application in solar cells with power conversion efficiencies reaching 3.3%. We report here the first colloidal synthesis of pure and mixed bromide–iodide cesium titanium perovskite nanocrystals with a bandgap tunable from 2.3 eV to 1.2 eV., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Cation Disorder and Local Structural Distortions in AgxBi1–xS2 Nanoparticles

  • Kesavan, Jagadesh Kopula
  • d’Acapito, Francesco
  • Scardi, Paolo
  • Stavrinadis, Alexandros
  • Akgul, Mehmet Zafer
  • Burgués-Ceballos, Ignasi
  • Konstantatos, Gerasimos
  • Boscherini, Federico
By combining X-ray absorption fine structure and X-ray diffraction measurements with density functional and molecular dynamics simulations, we study the structure of a set of AgxBi1−xS2 nanoparticles, a materials system of considerable current interest for photovoltaics. An apparent contradiction between the evidence provided by X-ray absorption and diffraction measurements is solved by means of the simulations. We find that disorder in the cation sublattice induces strong local distortions, leading to the appearance of short Ag–S bonds, the overall lattice symmetry remaining close to hexagonal, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Size- and temperature-dependent intraband optical properties of heavily n-doped PbS colloidal quantum dot solid-state films

  • Ramiro, Iñigo
  • Kundu, Biswajit
  • Dalmases, Mariona
  • Özdemir, Onur
  • Pedrosa, María
  • Konstantatos, Gerasimos
Steady-state access to intraband transitions in colloidal quantum dots (CQDs), via heavy doping, allows exploiting the electromagnetic spectrum at energies below the band gap. CQD intraband optoelectronics opens up a new path to cheap mid- and long-wavelength infrared photodetectors and light-emitting devices, which today employ mostly epitaxial materials. As a recent field of experimental research, thorough studies of the basic properties of intraband transitions in CQDs are still lacking. In this work, we investigate the size and temperature dependence of the intraband transition in heavily n-doped PbS quantum dot (QD) films. We measure the absorption coefficient of the intraband transition to be in the order of $10^4$ cm$^{-1}$, which is comparable to the value of the interband absorption coefficient. Additionally, we determine the size-dependence of the oscillator strength of the intraband transition. We demonstrate a negative dependence of the intraband energy with temperature, in contrast to the positive dependence of the interband transition., We thank Dr. Iacopo Torre for helpful discussions. The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 725165), the Spanish Ministry of Economy and Competitiveness (MINECO), and the “Fondo Europeo de Desarrollo Regional” (FEDER) through grant TEC2017-88655-R. The authors also acknowledge financial support from Fundacio Privada Cellex, the program CERCA and from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centres of Excellence, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Trap-state suppression and improved charge transport in PbS quantum dot solar cells with synergistic mixed ligand treatments

  • Pradhan, Santanu
  • Stavrinadis, Alexandros
  • Gupta, Shuchi
  • Bi, Yu
  • Stasio, Francesco Di
  • Konstantatos, Gerasimos
The power conversion efficiency of colloidal PbS‐quantum‐dot (QD)‐based solar cells is significantly hampered by lower‐than‐expected open circuit voltage (VOC). The VOC deficit is considerably higher in QD‐based solar cells compared to other types of existing solar cells due to in‐gap trap‐induced bulk recombination of photogenerated carriers. Here, this study reports a ligand exchange procedure based on a mixture of zinc iodide and 3‐mercaptopropyonic acid to reduce the VOC deficit without compromising the high current density. This layer‐by‐layer solid state ligand exchange treatment enhances the photovoltaic performance from 6.62 to 9.92% with a significant improvement in VOC from 0.58 to 0.66 V. This study further employs optoelectronic characterization, X‐ray photoelectron spectroscopy, and photoluminescence spectroscopy to understand the origin of VOC improvement. The mixed‐ligand treatment reduces the sub‐bandgap traps and significantly reduces bulk recombination in the devices., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Suppressing Deep Traps in PbS Colloidal Quantum Dots via Facile Iodide Substitutional Doping for Solar Cells with Efficiency >10%

  • Stavrinadis, Alexandros
  • Pradhan, Santanu
  • Papagiorgis, Paris
  • Itskos, Grigorios
  • Konstantatos, Konstantatos
Surface passivation of PbS colloidal quantum dots (QDs) with iodide has been used in highly efficient solar cells. Iodide passivation is typically achieved by ligand exchange processes on QD films. Complementary to this approach, herein we present a non-intrusive solution-based strategy for doping QDs with iodide to further optimize solar cell performance. The doping step is applied in-situ at the end of the synthesis of the QDs. The optimum precursor I/Pb ratio is found to be in the 1.5-3% range at which iodide substitutes S without excessively altering the dots´ surface chemistry. This allows for band engineering and decreasing the density of deep trap states of the QDs which taken together lead to PbS QD solar cells with efficiency in excess of 10%., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Mixed AgBiS2 nanocrystals for photovoltaics and photodetectors

  • Burgués-Ceballos, Ignasi
  • Wang, Yongjie
  • Konstantatos, Gerasimos
Heavy-metal-free colloidal nanocrystals are gaining due attention as low-cost, semiconducting materials for solution-processed optoelectronic applications. One common limitation of such materials is their limited carrier transport and trap-assisted recombination, which impede the performance of thick photoactive layers. Here we mix small-size and large-size AgBiS2 nanocrystals to judiciously favour the band alignment in photovoltaic and photodetector devices. The absorbing layer of these devices is fabricated in a gradient fashion in order to maximise charge transfer and transport. We implement this strategy to fabricate mixed AgBiS2 thin film solar cells with a power conversion of 7.3%, which significantly surpasses the performance of previously reported devices based on single-batch AgBiS2 nanocrystals. Additionally, this approach allows us to fabricate devices using thicker photoactive layers that show lower dark currents and external quantum efficiencies exceeding 40% over a broad bandwidth – covering the visible and near infrared range beyond 1 μm, thus unleashing the potential of colloidal AgBiS2 nanocrystals in photodetector applications., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Solid-State Thin-Film Broadband Short-Wave Infrared Light Emitters

  • Pradhan, Santanu
  • Dalmases, Mariona
  • Konstantatos, Gerasimos
Solid-state broadband light emitters in the visible have revolutionized today's lighting technology achieving compact footprints, flexible form factors, long lifetimes, and high energy saving, although their counterparts in the infrared are still in the development phase. To date, broadband emitters in the infrared have relied on phosphor-downconverted light emitters based on atomic optical transitions in transition metal or rare earth elements in the phosphor layer resulting in limited spectral bandwidths in the near-infrared and preventing their integration into electrically driven light-emitting diodes (LEDs). Herein, phosphor-converted LEDs based on engineered stacks of multi-bandgap colloidal quantum dots (CQDs) are reported as a novel class of broadband emitters covering a broad short-wave infrared (SWIR) spectrum from 1050–1650 nm with a full-width-half-maximum of 400 nm, delivering 14 mW of optical power with a quantum efficiency of 5.4% and power conversion efficiency of 13%. Leveraging the electrical conductivity of the CQD stacks, further, the first broadband SWIR-active LED is demonstrated, paving the way toward complementary metal–oxide–semiconductor integrated broadband emitters for on-chip spectrometers and low-cost volume manufacturing. SWIR spectroscopy is employed to illustrate the practical relevance of the emitters in food and material identification case studies., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Ag2ZnSnS4 Nanocrystals Expand the Availability of RoHS Compliant Colloidal Quantum Dots

  • Saha, Avijit
  • Figueroba, Alberto
  • Konstantatos, Gerasimos
The demonstration of the quantum confinement effect in colloidal quantum dots (QDs) has been extensively studied and exploited mainly in Pb and Cd chalcogenide systems. There has been an urgent need recently for the development of non(less)-toxic colloidal QDs to warrant compliance with current safety regulations (Restriction of Hazardous Substances (RoHS) Directive 2002/95/EC). Herein, we report Pb/Cd-free, solution processed luminescent Ag2ZnSnS4 (AZTS) colloidal QDs. We present a selective and controlled amine and thiol-free synthesis of air stable luminescent AZTS QDs by the hot injection technique. By controlling the reaction conditions we obtain controlled size variation and demonstrate the quantum confinement effect that is in good agreement with the theoretically calculated values. The band gap of the AZTS QDs is size-tunable in the near-infrared from 740 to 850 nm. Finally, we passivate the surface with Zn-oleate, which yields higher quantum yield (QY), longer lifetime, and better colloidal stability., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

High-Efficiency Light-Emitting Diodes Based on Formamidinium Lead Bromide Nanocrystals and solution processed transport layers

  • Stasio, Francesco Di
  • Ramiro, Íñigo
  • Bi, Yu
  • Christodoulou, Sotirios
  • Stavrinadis, Alexandros
  • Konstantatos, Gerasimos
Perovskite nanocrystal light-emitting diodes (LEDs) employing architecture comprising a ZnO nanoparticles electron-transport layer and a conjugated polymer hole-transport layer have been fabricated. The obtained LEDs demonstrate a maximum external-quantum-efficiency of 6.04%, luminance of 12998 Cd/m2 and stable electroluminescence at 519 nm. Importantly, such high efficiency and bright-ness have been achieved by employing solution processed transport layers, formamidinium lead bromide nanocrystals (CH(NH2)2PbBr3 NCs) synthesized at room-temperature and in air without the use of a Schlenk line, and a procedure based on atomic layer deposition to insolubilize the NC film. The obtained NCs show a photoluminescence quantum yield of 90% that is retained upon film fabrication. The results show that perovskite NC LEDs can achieve high-performance without the use of transport layers deposited through evaporation in ultra-high-vacuum., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

High Efficiency Colloidal Quantum Dot Infrared Light Emitting Diodes via Engineering at the Supra-Nanocrystalline Level

  • Pradhan, Santanu
  • DiStasio, Francesco
  • Bi, Yu
  • Gupta, Shuchi
  • Christodoulou, Sotirios
  • Stavrinadis, Alexandros
  • Konstantatos, Gerasimos
Colloidal quantum dot (CQD) light-emitting diodes (LEDs) deliver a compelling performance in the visible, yet infrared CQD LEDs underperform their visible-emitting counterparts, largely due to their low photoluminescence quantum efficiency. Here we employ a ternary blend of CQD thin film that comprises a binary host matrix that serves to electronically passivate as well as to cater for an efficient and balanced carrier supply to the emitting quantum dot species. In doing so, we report infrared PbS CQD LEDs with an external quantum efficiency of ~7.9% and a power conversion efficiency of ~9.3%, thanks to their very low density of trap states, on the order of 1014 cm−3, and very high photoluminescence quantum efficiency in electrically conductive quantum dot solids of more than 60%. When these blend devices operate as solar cells they deliver an open circuit voltage that approaches their radiative limit thanks to the synergistic effect of the reduced trap-state density and the density of state modification in the nanocomposite., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Highly efficient, ultrathin, Cd-free kesterite solar cells in superstrate configuration enabled by band level tuning via Ag incorporation

  • Wang, Zhuoran
  • Wang, Yongjie
  • Konstantatos, Gerasimos
Kesterite, or Cu2ZnSn(S,Se)4 (CZTS) is promising in developing sustainable PV technology due to its earth-abundant, non-toxic composition. However, issues including instability of interface, high density of defects that fails to allow the short charge-collection length to meet its light absorption needs, use of Cd that fails to comply with the restriction of hazardous substances (RoSH), are promoting the development of alternative, eco-friendly device structure. Here, this study reports an important progress on this subject by adopting the superstrate configuration to kesterite, thus to realize advantageous light management and high defect tolerance in an ultrathin device. By incorporating Ag in kesterite to overcome the detrimental alignment at the pristine interface, a solar cell with PCE of 8.1% has been fabricated with ~ 200 nm absorber and ~ 15 nm TiO2 buffer, representing a PCE improvement of nearly three-fold from the baseline Cu2ZnSn(S,Se)4 device and breaking the 5% PCE limit for superstrate kesterite cells to date. Moreover, this enables the sole use of TiO2 as novel buffer material free of toxic Cd. Further analysis reveals the critical role of Ag in synergistically tailoring band offset and bandgap, along with largely reduced density of defects, leading to this substantial performance improvement., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Ag2ZnSnS4 Nanocrystals Expand the Availability of RoHS Compliant Colloidal Quantum Dots

  • Saha, Avijit
  • Figueroba, Alberto
  • Konstantatos, Gerasimos
The demonstration of the quantum confinement effect in colloidal quantum dots (QDs) has been extensively studied and exploited mainly in Pb and Cd chalcogenide systems. There has been an urgent need recently for the development of non(less)-toxic colloidal QDs to warrant compliance with current safety regulations (Restriction of Hazardous Substances (RoHS) Directive 2002/95/ EC). Herein, we report Pb/Cd-free, solution processed luminescent Ag2ZnSnS4 (AZTS) colloidal QDs. We present a selective and controlled amine and thiol-free synthesis of air stable luminescent AZTS QDs by the hot injection technique. By controlling the reaction conditions we obtain controlled size variation and demonstrate the quantum confinement effect that is in good agreement with the theoretically calculated values. The band gap of the AZTS QDs is size-tunable in the near-infrared from 740 to 850 nm. Finally, we passivate the surface with Zn-oleate, which yields higher quantum yield (QY), longer lifetime, and better colloidal stability, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Hybrid 2D-QD MoS2–PbSe quantum dot broadband photodetectors with high-sensitivity and room-temperature operation at 2.5 µm

  • Kundu, Biswajit
  • Özdemir, Onur
  • Dalmases Solé, Mariona
  • Konstantatos, Gerasimos
  • Kumar, Gaurav
Broadband infrared photodetectors have profound importance in diverse applications including security, gas sensing, bioimaging, spectroscopy for food quality, and recycling, just to name a few. Yet, these applications can currently be served by expensive epitaxially grown photodetectors, limiting their market potential and social impact. The use of colloidal quantum dots (CQDs) and 2D materials in a hybrid layout is an attractive alternative to design low-cost complementary metal-oxide-semiconductor (CMOS) compatible infrared photodetectors. However, the spectral sensitivity of these conventional hybrid detectors is restricted to 2.1 µm. Herein, a hybrid structure comprising molybdenum disulfide (MoS2) with lead selenide (PbSe) CQDs is presented to extend their sensitivity further toward the mid-wave infrared, up to 3 µm. A room-temperature responsivity of 137.6 A/W and a detectivity of 7.7 × 10^10 Jones are achieved at 2.55 µm owing to highly efficient photoexcited carrier separation at the interface of MoS2 and PbSe in combination with an oxide coating to reduce dark current; the highest value is yet for a PbSe-based hybrid device. These findings strongly support the successful fabrication of hybrid devices, which may pave the pathway for cost-effective, high-performance, next-generation, novel photodetectors., The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research (grant agreement no. 725165) as well as Graphene Flagship under Grant Agreement Nr. 881603 (Core3). The authors also acknowledge financial support from the Spanish Ministry of Economy and Competitiveness (MINECO), and the “Fondo Europeo de Desarrollo Regional” (FEDER) through grant TEC2017-88655-R, from the Spanish State Research Agency through the “Severo Ochoa” program for Centers of Excellence in R&D (CEX2019-000910-S), from Fundació Cellex, Fundació Mir-Puig, and from Generalitat de Catalunya through the CERCA program., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Matildite Contact with Media: First-Principles Study of AgBiS2 Surfaces and Nanoparticle Morphology

  • Viñes Solana, Francesc
  • Konstantatos, Gerasimos
  • Illas i Riera, Francesc
Motivated by the interest in AgBiS2 material for solar light harvesting applications, a detailed bulk first-principles quantum mechanical study of its surface properties is presented. Density functional theory based calculations with the Perdew-Burke-Ernzerhof functional have been carried out for different surface orientations and terminations of the matildite polymorph. From the results, two particularly stable facets are predicted to dominate Wulff shaped AgBiS2 nanoparticles. These are the (001) type nonpolar surface and the (111) polar terminations where facets are exposed containing solely Ag or S atoms. The Wulff equilibrium shape is predicted to be a cube with only two edges capped. This particular shape explains a previously reported surface enrichment of Ag with respect to Bi of ∼1.5. The (001) surfaces display an ionic character similar to bulk AgBiS2, with a low work function of 4.31 eV, although the inspection of the density of states (DOS) reveals a bandgap increased by 0.3 eV compared to bulk. This surface effect could explain the bulk wavelength overestimation of the absorption coefficient decay, as previously determined. Last but not least, the DOS of the (111) polar termination reveals a metallic character, where Fermi level is located below that on the (001) surfaces. Possible implications of the different electronic structure of these surfaces in the reported photoactivity are discussed.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Matildite Contact with Media: First-Principles Study of AgBiS2 Surfaces and Nanoparticle Morphology

  • Viñes, Francesc
  • Konstantatos, Gerasimos
  • Illas, Francesc
Motivated by the interest in AgBiS2 material for solar light harvesting applications, a detailed bulk first-principles quantum mechanical study of its surface properties is presented. Density functional theory based calculations with the Perdew–Burke–Ernzerhof functional have been carried out for different surface orientations and terminations of the matildite polymorph. From the results, two particularly stable facets are predicted to dominate Wulff shaped AgBiS2 nanoparticles. These are the (001) type nonpolar surface and the (111) polar terminations where facets are exposed containing solely Ag or S atoms. The Wulff equilibrium shape is predicted to be a cube with only two edges capped. This particular shape explains a previously reported surface enrichment of Ag with respect to Bi of ∼1.5. The (001) surfaces display an ionic character similar to bulk AgBiS2, with a low work function of 4.31 eV, although the inspection of the density of states (DOS) reveals a bandgap increased by 0.3 eV compared to bulk. This surface effect could explain the bulk wavelength overestimation of the absorption coefficient decay, as previously determined. Last but not least, the DOS of the (111) polar termination reveals a metallic character, where Fermi level is located below that on the (001) surfaces. Possible implications of the different electronic structure of these surfaces in the reported photoactivity are discussed., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Ag2ZnSnS4–ZnS core–shell colloidal quantum dots: a near-infrared luminescent material based on environmentally friendly elements

  • Saha, Avijit
  • Konstantatos, Gerasimos
Low cost, multinary colloidal quantum dots (QDs) based on environmentally friendly elements, with bright, narrow-width, tunable near-infrared (NIR) luminescence are promising alternatives to Cd and Pb chalcogenide QDs for in vivo bio-imaging, LED and sensing applications. Herein, we demonstrate Pb/Cd free solution-processed colloidal luminescent Ag2ZnSnS4–ZnS (AZTS–ZnS) core–shell QDs with precise control over the ZnS shell thickness and thereby its optical properties. Unlike indium based multinary (I–III–VI group) core–shell QDs these nanocrystals show a narrow photoluminescence (PL) full width at half maximum (fwhm) of 105–110 meV in the first NIR window. By monitoring the starting AZTS core size, we achieve tunable emission over a small NIR window in these QDs with the best PL quantum yield (PLQY) of 17.4%., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Cation disorder engineering yields AgBiS2 nanocrystals with enhanced optical absorption for efficient ultrathin solar cells

  • Wang, Yongjie
  • Kavanagh, Seán R.
  • Burgués-Ceballos, Ignasi
  • Walsh, Aron
  • Scanlon, David O.
  • Konstantatos, Gerasimos
Strong optical absorption by a semiconductor is a highly desirable property for many optoelectronic and photovoltaic applications. The optimal thickness of a semiconductor absorber is primarily determined by its absorption coefficient. To date, this parameter has been considered as a fundamental material property, and efforts to realize thinner photovoltaics have relied on light-trapping structures that add complexity and cost. Here we demonstrate that engineering cation disorder in a ternary chalcogenide semiconductor leads to considerable absorption increase due to enhancement of the optical transition matrix elements. We show that cation-disorder-engineered AgBiS2 colloidal nanocrystals offer an absorption coefficient that is higher than other photovoltaic materials, enabling highly efficient extremely thin absorber photovoltaic devices. We report solution-processed, environmentally friendly, 30-nm-thick solar cells with short-circuit current density of 27 mA cm−2, a power conversion efficiency of 9.17% (8.85% certified) and high stability under ambient conditions., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Cation disorder engineering yields AgBiS2 nanocrystals with enhanced optical absorption for efficient ultrathin solar cells

  • Wang, Yongjie
  • Kavanagh R., Seán
  • Burgués-Ceballos, Ignasi
  • Walsh, Aron
  • Scanlon O., David
  • Konstantatos, Gerasimos
Strong optical absorption by a semiconductor is a highly desirable property for many optoelectronic and photovoltaic applications. The optimal thickness of a semiconductor absorber is primarily determined by its absorption coefficient. To date, this parameter has been considered as a fundamental material property, and efforts to realize thinner photovoltaics have relied on light-trapping structures that add complexity and cost. Here we demonstrate that engineering cation disorder in a ternary chalcogenide semiconductor leads to considerable absorption increase due to enhancement of the optical transition matrix elements. We show that cation-disorder-engineered AgBiS2 colloidal nanocrystals offer an absorption coefficient that is higher than other photovoltaic materials, enabling highly efficient extremely thin absorber photovoltaic devices. We report solution-processed, environmentally friendly, 30-nm-thick solar cells with short-circuit current density of 27¿mA¿cm-2, a power conversion efficiency of 9.17% (8.85% certified) and high stability under ambient conditions., G.K. acknowledges financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 725165), the Fundació Joan Ribas Araquistain (FJRA), the Fundació Privada Cellex, the program CERCA, EQC2019-005797-P (AEI/FEDER UE), 2017SGR1373 and ‘Severo Ochoa’ Centre of Excellence CEX2019-000910-S funded by the Spanish State Research Agency. Y.W. acknowledges support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 754558. I.B.-C. acknowledges support from the Government of Catalonia’s Beatriu de Pinós postdoctoral programme (grant no. 2017BP00241). S.R.K. thanks L. Harnett-Caulfield for help with using the alloy theoretic automated toolkit software package and Y.-S. Choi for help with calculating the Madelung potentials; he also acknowledges the EPSRC Centre for Doctoral Training in the Advanced Characterisation of Materials (CDT-ACM) (EP/S023259/1) for funding a PhD studentship. A.W. and D.O.S. acknowledge the use of the UCL Kathleen High Performance Computing Facility (Kathleen@UCL), the Imperial College Research Computing Service and associated support services. By the membership of the UK’s HEC Materials Chemistry Consortium, which is funded by the EPSRC (EP/L000202, EP/R029431 and EP/T022213), this work used the ARCHER2 UK National Supercomputing Service and the UK Materials and Molecular Modelling (MMM) Hub (Thomas EP/P020194 and Young EP/T022213). D.O.S. acknowledges support from the EPSRC (EP/N01572X/1) and the European Research Council, ERC (grant no. 758345)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Breaking the Open-Circuit Voltage Deficit Floor in PbS Quantum Dot Solar Cells through Synergistic Ligand and Architecture Engineering

  • Pradhan, Santanu
  • Stavrinadis, Alexandros
  • Gupta, Shuchi
  • Christodoulou, Sotirios
  • Konstantatos, Gerasimos
To realize the full potential of colloidal quantum dot (CQD) based solar cells, it is important to address the issue of large open-circuit voltage (VOC) deficit which is a major roadblock in reaching higher efficiencies. The origin of the VOC deficit in these solar cells lies primarily in the presence of sub-bandgap trap states of the QDs. Here, we present a synergistic engineering framework to passivate these sub-bandgap states in PbS QDs through chemical surface passivation and remote passivation exploiting ligand and architecture engineering. In particular, we form bulk nanoheterojunctions (BNH) by mixing PbS QDs with ZnO nanocrystals in conjunction with mixed ligand treatments to passivate surface traps. We employ the mixed ligand system of zinc iodide and 3-mercatopropyonic acid to leverage the benefits of both organic and inorganic ligands for surface passivation and improved charge transport. This mixed ligand treatment in BNH architectures leads to record low VOC deficit for PbS QDs of 0.4–0.55 V compared to previously reported 0.6–0.8 V for the range of 1.1–1.35 eV bandgap PbS QDs., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Low-Cost RoHS Compliant Solution Processed Photovoltaics Enabled by Ambient Condition Synthesis of AgBiS2 Nanocrystals

  • Akgul, M. Zafer
  • Figueroba, Alberto
  • Pradhan, Santanu
  • Bi, Yu
  • Konstantatos, Gerasimos
Two major challenges exist before colloidal nanocrystal solar cells can take their place in the market: So far, these devices are based on Pb/Cd-containing nanocrystals, and second, the synthesis of these nanocrystals takes place in an inert atmosphere at elevated temperatures due to the use of air-sensitive chemicals. In this report, a room-temperature, ambient-air synthesis for nontoxic AgBiS2 nanocrystals is presented. As this method utilizes stable precursors, the need for the use of a protective environment is eliminated, enabling the large-scale production of AgBiS2 nanocrystals. The production cost of AgBiS2 NCs at room temperature and under ambient conditions reduces by ∼60% compared to prior reports based on hot injection, and the solar cells made of these nanocrystals yield a promising power conversion efficiency (PCE) of 5.5%, the highest reported to date for a colloidal nanocrystal material free of Pb or Cd synthesized at room temperature and under ambient conditions., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Colloidal AgBiS2 nanocrystals with reduced recombination yield 6.4% power conversion efficiency in solution-processed solar cells

  • Burgués-Ceballos, Ignasi
  • Wang, Yongjie
  • Akgul, M. Zafer
  • Konstantatos, Gerasimos
AgBiS2 nanocrystals have recently emerged as a RoHS compliant material for photovoltaics. This heavy-metal-free ternary chalcogenide can be prepared from earth-abundant precursors, is solution-processable and presents a high absorption coefficient as well as a suitable bandgap for solar cell applications. However, the full potential of AgBiS2 nanocrystals is yet to be realised; the highest efficiencies reported so far used very thin (~35 nm) absorbing layers due to the limited carrier transport and trap-assisted recombination that hinder the performance of thicker layers. In this work we implement a synthetic route to obtain larger size colloidal AgBiS2 nanocrystals, which in turn allows to fabricate thin film solar cells with higher mobility and reduced trap-assisted recombination, resulting in a power conversion efficiency of 6.4%, due to a photocurrent increase of 4 mA/cm2 compared to prior reports. We conclude by discussing on the main current challenges underpinning the photovoltaic performance of this material as well as strategies to further reduce the voltage and photocurrent losses., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Environmentally friendly AgBiS2 nanocrystal inks for efficient solar cells employing green solvent processing

  • Wang, Yongjie
  • Peng, Lucheng
  • Wang, Zhuoran
  • Konstantatos, Gerasimos
Silver bismuth sulfide nanocrystals (AgBiS2 NCs) are emerging absorber materials for low-cost solar cells, owing to their solution-processability, environmentally friendliness, earth abundance, and high absorption coefficients. When it comes to green manufacturing technologies, besides the semiconductor materials, solvents play an equally important role. Here, solution-phase ligand-exchanged (SPLE) AgBiS2 nanocrystal inks employing 3-mercaptopropionic (MPA) in methanol as a ligand solution are introduced. The resultant MPA capped AgBiS2 nanocrystals can be fully dissolved in water, forming completely environmentally friendly nanocrystal inks. These nanocrystal inks allow the fabrication of fully green-processed photovoltaic devices with a power conversion efficiency up to 7.3%. This method not only demonstrates the potential of solution-phase ligand-exchanged AgBiS2 nanocrystal inks, but also paves a path toward fully green-processed nanocrystal devices., The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 725165) and the Fundació Joan Ribas Araquistain (FJRA). This project was supported also by Fundació Privada Cellex, the program CERCA, EQC2019-005797-P (AEI/FEDER UE), 2017SGR1373 and “Severo ochoa” Center of Excellence CEX2019-000910-S – Funded by the Spanish State Research Agency. Y.W. acknowledges the support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754558. Z.W. acknowledges the support from the Marie Sklodowska-Curie Individual Fellowship (SUSNASOL, grant agreement No. 886953)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Reducing Interface Recombination through Mixed Nanocrystal Interlayers in PbS Quantum Dot Solar Cells

  • Pradhan, Santanu
  • Stavrinadis, Alexandros
  • Gupta, Shuchi
  • Konstantatos, Gerasimos
The performance of ZnO/PbS colloidal quantum dot (CQD)-based heterojunction solar cells is hindered by charge carrier recombination at the heterojunction interface. Reducing interfacial recombination can improve charge collection and the photocurrent of the device. Here we report the use of a mixed nanocrystal (MNC) buffer layer comprising zinc oxide nanocrystals and lead sulfide quantum dots at the respective heterojunction interface. Remote trap passivation of the PbS CQDs taking place within this MNC layer reduces interfacial recombination and electron back transfer which in turn improves charge collection efficiency. Upon the addition of the MNC layer, the overall power conversion efficiency increases from 9.11 to 10.16% and Short-circuit current density (JSC) increases from 23.54 to 25.23 mA/cm2. Optoelectronic characterization of the solar cells confirms that the effects underlying device improvement are reduced trap density and improved charge collection efficiency due to the presence of the MNC buffer layer., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Infrared Solution‐Processed Quantum Dot Solar Cells Reaching External Quantum Efficiency of 80% at 1.35 µm and Jsc in Excess of 34 mA cm−2

  • Bi, Yu
  • Pradhan, Santanu
  • Gupta, Shuchi
  • Akgul, Mehmet Zafer
  • Stavrinadis, Alexandros
Developing low‐cost photovoltaic absorbers that can harvest the short‐wave infrared (SWIR) part of the solar spectrum, which remains unharnessed by current Si‐based and perovskite photovoltaic technologies, is a prerequisite for making high‐efficiency, low‐cost tandem solar cells. Here, infrared PbS colloidal quantum dot (CQD) solar cells employing a hybrid inorganic–organic ligand exchange process that results in an external quantum efficiency of 80% at 1.35 µm are reported, leading to a short‐circuit current density of 34 mA cm−2 and a power conversion efficiency (PCE) up to 7.9%, which is a current record for SWIR CQD solar cells. When this cell is placed at the back of an MAPbI3 perovskite film, it delivers an extra 3.3% PCE by harnessing light beyond 750 nm., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Single-exciton gain and stimulated emission across the infrared telecom band from robust heavily doped PbS colloidal quantum dots

  • Christodoulou, Sotirios
  • Ramiro, Iñigo
  • Othonos, Andreas
  • Özdemir, Onur
  • Dalmases Solé, Mariona
  • Özdemir, Onur
  • Pradhan, Santanu
  • Itskos, Grigorios
  • Konstantatos, Gerasimos
Materials with optical gain in the infrared are of paramount importance for optical communications, medical diagnostics, and silicon photonics. The current technology is based either on costly III-V semiconductors that are not monolithic to silicon CMOS technology or Er-doped fiber technology that does not make use of the full fiber transparency window. Colloidal quantum dots (CQDs) offer a unique opportunity as an optical gain medium in view of their tunable bandgap, solution processability, and CMOS compatibility. The 8-fold degeneracy of infrared CQDs based on Pb-chalcogenides has hindered the demonstration of low-threshold optical gain and lasing, at room temperature. We demonstrate room-temperature, infrared, size-tunable, band-edge stimulated emission with a line width of ~14 meV. Leveraging robust electronic doping and charge-exciton interactions in PbS CQD thin films, we reach a gain threshold at the single exciton regime representing a 4-fold reduction from the theoretical limit of an 8-fold degenerate system, with a net modal gain in excess of 100 cm-1., The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 725165), the Spanish Ministry of Economy and Competitiveness (MINECO), and the ‘Fondo Europeo de Desarrollo Regional’ (FEDER) through grant TEC2017- 88655-R. The authors also acknowledge financial support from Fundacio Privada Cellex, the program CERCA, and from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522). S.C. acknowledges support from a Marie Curie Standard European Fellowship (NAROBAND, H2020-MSCA-IF-2016-750600). I.R. acknowledges support from the Ministerio de Economiá , Industria y Competitividad of Spain via a Juan de la Cierva fellowship. We are also thankful to Dr. Kaifen Wu for fruitful discussions., Peer Reviewed, Postprint (published version)