Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Near-Unity Photoluminescence Quantum Yield in CsPbBr3 Nanocrystal Solid-State Films via Postsynthesis Treatment with Lead Bromide

  • Stasio, Francesco Di
  • Christodoulou, Sotirios
  • Huo, Nengjie
  • Konstantatos, Gerasimos
Metal halide perovskite nanocrystals (NCs) possess high photoluminescence (PL) quantum yield (PL) and color tunability. Yet, until now, it has been difficult to maintain the high PL observed in solution in spin-coated films. Here, we report a novel CsPbBr3 NCs room-temperature synthesis based on Cs acetate, which displays near-unity PL in solid-state films upon post-synthetic treatment with lead bromide. The as-synthesized NCs show a PL of 80% in spincoated films but the post-synthesis treatment further enhances the efficiency >95%. The high PL is further confirmed by the monomolecular decay of the PL (5.8 ns) indicating a nearly complete suppression of non-radiative channels. The obtained films demonstrate high stability in air and require around 3 weeks to decrease to half the initial PL value., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

High Open Circuit Voltage Solar Cells based on bright mixed-halide CsPbBrI2 Perovskite Nanocrystals Synthesized in Ambient Air Conditions

  • Christodoulou, Sotirios
  • Stasio, Francesco Di
  • Pradhan, Santanu
  • Stavrinadis, Alexandros
  • Konstantatos, Gerasimos
Lead halide perovskite nanocrystals (NCs) are currently emerging as one of the most interesting solution processed semiconductors since they possess high photoluminescence quantum yield (PLQY), and colour tunability through anion exchange reactions or quantum confinement. Here, we show efficient solar cells based on mixed halide (CsPbBrI2) NCs obtained via anion exchange reactions in ambient conditions. We performed anion exchange reactions in concentrated NC solutions with I-, thus inducing a PL red-shift up to 676 nm, and obtaining a high PLQY in film (65%). Solar cell devices operating in the wavelength range 350-660 nm were fabricated in air with two different deposition methods. The solar cells display a photo-conversion efficiency of 5.3% and open circuit voltage (Voc) up to 1.31V, among the highest reported for perovskite based solar cells with band gap below 2eV, clearly demonstrating the potential of this material., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

High Efficiency Colloidal Quantum Dot Infrared Light Emitting Diodes via Engineering at the Supra-Nanocrystalline Level

  • Pradhan, Santanu
  • DiStasio, Francesco
  • Bi, Yu
  • Gupta, Shuchi
  • Christodoulou, Sotirios
  • Stavrinadis, Alexandros
  • Konstantatos, Gerasimos
Colloidal quantum dot (CQD) light-emitting diodes (LEDs) deliver a compelling performance in the visible, yet infrared CQD LEDs underperform their visible-emitting counterparts, largely due to their low photoluminescence quantum efficiency. Here we employ a ternary blend of CQD thin film that comprises a binary host matrix that serves to electronically passivate as well as to cater for an efficient and balanced carrier supply to the emitting quantum dot species. In doing so, we report infrared PbS CQD LEDs with an external quantum efficiency of ~7.9% and a power conversion efficiency of ~9.3%, thanks to their very low density of trap states, on the order of 1014 cm−3, and very high photoluminescence quantum efficiency in electrically conductive quantum dot solids of more than 60%. When these blend devices operate as solar cells they deliver an open circuit voltage that approaches their radiative limit thanks to the synergistic effect of the reduced trap-state density and the density of state modification in the nanocomposite., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

High-Efficiency Light-Emitting Diodes Based on Formamidinium Lead Bromide Nanocrystals and solution processed transport layers

  • Stasio, Francesco Di
  • Ramiro, Íñigo
  • Bi, Yu
  • Christodoulou, Sotirios
  • Stavrinadis, Alexandros
  • Konstantatos, Gerasimos
Perovskite nanocrystal light-emitting diodes (LEDs) employing architecture comprising a ZnO nanoparticles electron-transport layer and a conjugated polymer hole-transport layer have been fabricated. The obtained LEDs demonstrate a maximum external-quantum-efficiency of 6.04%, luminance of 12998 Cd/m2 and stable electroluminescence at 519 nm. Importantly, such high efficiency and bright-ness have been achieved by employing solution processed transport layers, formamidinium lead bromide nanocrystals (CH(NH2)2PbBr3 NCs) synthesized at room-temperature and in air without the use of a Schlenk line, and a procedure based on atomic layer deposition to insolubilize the NC film. The obtained NCs show a photoluminescence quantum yield of 90% that is retained upon film fabrication. The results show that perovskite NC LEDs can achieve high-performance without the use of transport layers deposited through evaporation in ultra-high-vacuum., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Trap-state suppression and improved charge transport in PbS quantum dot solar cells with synergistic mixed ligand treatments

  • Pradhan, Santanu
  • Stavrinadis, Alexandros
  • Gupta, Shuchi
  • Bi, Yu
  • Stasio, Francesco Di
  • Konstantatos, Gerasimos
The power conversion efficiency of colloidal PbS‐quantum‐dot (QD)‐based solar cells is significantly hampered by lower‐than‐expected open circuit voltage (VOC). The VOC deficit is considerably higher in QD‐based solar cells compared to other types of existing solar cells due to in‐gap trap‐induced bulk recombination of photogenerated carriers. Here, this study reports a ligand exchange procedure based on a mixture of zinc iodide and 3‐mercaptopropyonic acid to reduce the VOC deficit without compromising the high current density. This layer‐by‐layer solid state ligand exchange treatment enhances the photovoltaic performance from 6.62 to 9.92% with a significant improvement in VOC from 0.58 to 0.66 V. This study further employs optoelectronic characterization, X‐ray photoelectron spectroscopy, and photoluminescence spectroscopy to understand the origin of VOC improvement. The mixed‐ligand treatment reduces the sub‐bandgap traps and significantly reduces bulk recombination in the devices., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Near-Unity Photoluminescence Quantum Yield in CsPbBr3 Nanocrystal Solid-State Films via Postsynthesis Treatment with Lead Bromide

  • Stasio, Francesco Di
  • Christodoulou, Sotirios
  • Huo, Nengjie
  • Konstantatos, Gerasimos
Metal halide perovskite nanocrystals (NCs) possess high photoluminescence (PL) quantum yield (PL) and color tunability. Yet, until now, it has been difficult to maintain the high PL observed in solution in spin-coated films. Here, we report a novel CsPbBr3 NCs room-temperature synthesis based on Cs acetate, which displays near-unity PL in solid-state films upon post-synthetic treatment with lead bromide. The as-synthesized NCs show a PL of 80% in spincoated films but the post-synthesis treatment further enhances the efficiency >95%. The high PL is further confirmed by the monomolecular decay of the PL (5.8 ns) indicating a nearly complete suppression of non-radiative channels. The obtained films demonstrate high stability in air and require around 3 weeks to decrease to half the initial PL value., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Trap-state suppression and improved charge transport in PbS quantum dot solar cells with synergistic mixed ligand treatments

  • Pradhan, Santanu
  • Stavrinadis, Alexandros
  • Gupta, Shuchi
  • Bi, Yu
  • Stasio, Francesco Di
  • Konstantatos, Gerasimos
The power conversion efficiency of colloidal PbS‐quantum‐dot (QD)‐based solar cells is significantly hampered by lower‐than‐expected open circuit voltage (VOC). The VOC deficit is considerably higher in QD‐based solar cells compared to other types of existing solar cells due to in‐gap trap‐induced bulk recombination of photogenerated carriers. Here, this study reports a ligand exchange procedure based on a mixture of zinc iodide and 3‐mercaptopropyonic acid to reduce the VOC deficit without compromising the high current density. This layer‐by‐layer solid state ligand exchange treatment enhances the photovoltaic performance from 6.62 to 9.92% with a significant improvement in VOC from 0.58 to 0.66 V. This study further employs optoelectronic characterization, X‐ray photoelectron spectroscopy, and photoluminescence spectroscopy to understand the origin of VOC improvement. The mixed‐ligand treatment reduces the sub‐bandgap traps and significantly reduces bulk recombination in the devices., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

High-Efficiency Light-Emitting Diodes Based on Formamidinium Lead Bromide Nanocrystals and solution processed transport layers

  • Stasio, Francesco Di
  • Ramiro, Íñigo
  • Bi, Yu
  • Christodoulou, Sotirios
  • Stavrinadis, Alexandros
  • Konstantatos, Gerasimos
Perovskite nanocrystal light-emitting diodes (LEDs) employing architecture comprising a ZnO nanoparticles electron-transport layer and a conjugated polymer hole-transport layer have been fabricated. The obtained LEDs demonstrate a maximum external-quantum-efficiency of 6.04%, luminance of 12998 Cd/m2 and stable electroluminescence at 519 nm. Importantly, such high efficiency and bright-ness have been achieved by employing solution processed transport layers, formamidinium lead bromide nanocrystals (CH(NH2)2PbBr3 NCs) synthesized at room-temperature and in air without the use of a Schlenk line, and a procedure based on atomic layer deposition to insolubilize the NC film. The obtained NCs show a photoluminescence quantum yield of 90% that is retained upon film fabrication. The results show that perovskite NC LEDs can achieve high-performance without the use of transport layers deposited through evaporation in ultra-high-vacuum., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

High Efficiency Colloidal Quantum Dot Infrared Light Emitting Diodes via Engineering at the Supra-Nanocrystalline Level

  • Pradhan, Santanu
  • DiStasio, Francesco
  • Bi, Yu
  • Gupta, Shuchi
  • Christodoulou, Sotirios
  • Stavrinadis, Alexandros
  • Konstantatos, Gerasimos
Colloidal quantum dot (CQD) light-emitting diodes (LEDs) deliver a compelling performance in the visible, yet infrared CQD LEDs underperform their visible-emitting counterparts, largely due to their low photoluminescence quantum efficiency. Here we employ a ternary blend of CQD thin film that comprises a binary host matrix that serves to electronically passivate as well as to cater for an efficient and balanced carrier supply to the emitting quantum dot species. In doing so, we report infrared PbS CQD LEDs with an external quantum efficiency of ~7.9% and a power conversion efficiency of ~9.3%, thanks to their very low density of trap states, on the order of 1014 cm−3, and very high photoluminescence quantum efficiency in electrically conductive quantum dot solids of more than 60%. When these blend devices operate as solar cells they deliver an open circuit voltage that approaches their radiative limit thanks to the synergistic effect of the reduced trap-state density and the density of state modification in the nanocomposite., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

High Open Circuit Voltage Solar Cells based on bright mixed-halide CsPbBrI2 Perovskite Nanocrystals Synthesized in Ambient Air Conditions

  • Christodoulou, Sotirios
  • Stasio, Francesco Di
  • Pradhan, Santanu
  • Stavrinadis, Alexandros
  • Konstantatos, Gerasimos
Lead halide perovskite nanocrystals (NCs) are currently emerging as one of the most interesting solution processed semiconductors since they possess high photoluminescence quantum yield (PLQY), and colour tunability through anion exchange reactions or quantum confinement. Here, we show efficient solar cells based on mixed halide (CsPbBrI2) NCs obtained via anion exchange reactions in ambient conditions. We performed anion exchange reactions in concentrated NC solutions with I-, thus inducing a PL red-shift up to 676 nm, and obtaining a high PLQY in film (65%). Solar cell devices operating in the wavelength range 350-660 nm were fabricated in air with two different deposition methods. The solar cells display a photo-conversion efficiency of 5.3% and open circuit voltage (Voc) up to 1.31V, among the highest reported for perovskite based solar cells with band gap below 2eV, clearly demonstrating the potential of this material., Peer Reviewed, Postprint (author's final draft)