Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 407
Encontrada(s) 5 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Structural Expansion of Cyclohepta[def]fluorene towards Azulene-Embedded Non-Benzenoid Nanographenes

  • Wu, Fupeng
  • Barragán, Ana
  • Gallardo, Aurelio
  • Yang, Lin
  • Biswas, Kalyan
  • Écija, David
  • Mendieta Moreno, Jesús Ignacio
  • Urgel, José I.
  • Ma, Ji
  • Feng, Xinliang
Non-benzenoid non-alternant nanographenes (NGs) have attracted increasing attention on account of their distinct electronic and structural features in comparison to their isomeric benzenoid counterparts. In this work, we present a series of unprecedented azulene-embedded NGs on Au(111) during the attempted synthesis of cyclohepta[def]fluorene-based high-spin non-Kekulé structure. Comprehensive scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM) evidence the structures and conformations of these unexpected products. The dynamics of the precursor bearing 9-(2,6-dimethylphenyl)anthracene and dihydro-dibenzo-cyclohepta[def]fluorene units and its reaction products on the surface are analyzed by density functional theory (DFT) and molecular dynamics (MD) simulations. Our study sheds light on the fundamental understanding of precursor design for the fabrication of π-extended non-benzenoid NGs on a metal surface, This research was financially supported by the EU Graphene Flagship (Graphene Core 3, 881603), ERC Consolidator Grant (T2DCP, 819698), H2020-MSCA-ITN (ULTIMATE, No. 813036), the Center for Advancing Electronics Dresden (cfaed), H2020- EU.1.2.2. – FET Proactive Grant (LIGHT-CAP, 101017821) and the DFG-SNSF Joint Switzerland-German Research Project (EnhanTopo, No. 429265950). This project has received funding from Ministerio de Ciencia, Innovacion y Universidades (PID2019-108532GB-I00). IMDEA Nanociencia is appreciative of support from the “(MAD2D-CM)” project funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union; and from the “Severo Ochoa” Programme for Centers of Excellence in R&D (MINECO, grants SEV-2016-0686 and CEX2020-001039-S). The authors gratefully acknowledge the GWK support for funding this project by providing computing time through the Center for Information Services and HPC (ZIH) at TU Dresden and the Computational resources e-INFRA CZ project (ID:90254), supported by the Ministry of Education, Youth and Sports of the Czech Republic. Open Access funding enabled and organized by Projekt DEAL
Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Coherent coupling between vortex bound states and magnetic impurities in 2D layered superconductors

Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Angle- and polarization-resolved luminescence from suspended and hexagonal boron nitride encapsulated MoSe2 monolayers

  • Han, Bo
  • Stephan, Sven
  • Thompson, Joshua J.P.
  • Esmann, Martin
  • Antón Solanas, Carlos
  • Shan, Hangyong
  • Kunte, Nils
  • Brem, Samuel
  • Tongay, Sefaattin
  • Lienau, Christoph
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Silies, Martin
  • Malic, Ermin
  • Schneider, Christian
The polarized photoluminescence from atomically thin transition metal dichalcogenides is a frequently applied tool to scrutinize optical selection rules and valley physics, yet it is known to sensibly depend on a variety of internal and external material and sample properties. In this work, we apply combined angle- and polarization-resolved spectroscopy to explore the interplay of excitonic physics and phenomena arising from the commonly utilized encapsulation procedure on the optical properties of atomically thinMoSe2.We probe monolayers prepared in both suspended and encapsulated manners.We show that the hBN encapsulation significantly enhances the linear polarization of exciton photoluminescence emission at large emission angles. This degree of linear polarization of excitons can increase up to ∼17% in the hBN encapsulated samples. As we confirm by finite-difference time-domain simulations, it can be directly connected to the optical anisotropy of the hBN layers. In comparison, the linear polarization at finite exciton momenta is significantly reduced in a suspendedMoSe2 monolayer, and becomes notable only in cryogenic conditions. This phenomenon strongly suggests that the effect is rooted in the k-dependent anisotropic exchange coupling inherent in2Dexcitons.Our results have strong implications on further studies on valley contrasting selection rules and valley coherence phenomena using standard suspended and encapsulated samples, Deutsche Forschungsgemeinschaft (DFG) (SPP 2244, SCHN 1376 11-1, 14-1, SFB 1083); European Union’s Horizon 2020 Research and Innovation Program (881603); University of Oldenburg; Bundesministerium für Bildung und Forschung (BMBF) (NanoMatFutur FKZ: 13N13637); U.S. Department of Energy; Basic Energy Sciences; Division of Materials Sciences and Engineering (SC0020653); Applied Materials Inc.; National Science Foundation (DMR 2206987, CMMI-1933214, ECCS 2052527, DMR 2111812); VolkswagenStiftung (SMART); Japan Society for the Promotion of Science (KAKENHI) (19H05790, 20H00354, 21H05233)
Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Integrating van der Waals materials on paper substrates for electrical and optical applications

Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Magnetization Signature of Topological Surface States in a Non-Symmorphic Superconductor

  • Kuang, Wenjun
  • Lopez-Polin Peña, Guillermo
  • Lee, Hyungjun
  • Guinea, Francisco
  • Whitehead, George
  • Timokhin, Ivan
  • Berdyugin, Alexey I.
  • Kumar, Roshan Krishna
  • Yazyev, Oleg V.
  • Walet, Niels
  • Principi, Alessandro
  • Geim, Andre K.
  • Grigorieva, Irina V.
Superconductors with nontrivial band structure topology represent a class of materials with unconventional and potentially useful properties. Recent years have seen much success in creating artificial hybrid structures exhibiting the main characteristics of 2D topological superconductors. Yet, bulk materials known to combine inherent superconductivity with nontrivial topology remain scarce, largely because distinguishing their central characteristic—the topological surface states—has proved challenging due to a dominant contribution from the superconducting bulk. In this work, a highly anomalous behavior of surface superconductivity in topologically nontrivial 3D superconductor In2Bi, where the surface states result from its nontrivial band structure, itself a consequence of the non-symmorphic crystal symmetry and strong spin–orbit coupling, is reported. In contrast to smoothly decreasing diamagnetic susceptibility above the bulk critical field, Hc2, as seen in conventional superconductors, a near-perfect, Meissner-like screening of low-frequency magnetic fields well above Hc2 is observed. The enhanced diamagnetism disappears at a new phase transition close to the critical field of surface superconductivity, Hc3. Using theoretical modeling, the anomalous screening is shown to be consistent with modification of surface superconductivity by the topological surface states. The possibility of detecting signatures of the surface states using macroscopic magnetization provides a new tool for the discovery and identification of topological superconductors
Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Valley-exchange coupling probed by angle-resolved photoluminescence

  • Thompson, Joshua J.P.
  • Brem, Samuel
  • Fang, Hanlin
  • Antón Solanas, Carlos
  • Han, Bo
  • Shan, Hangyong
  • Dash, Saroj P.
  • Wieczorek, Witlef
  • Schneider, Christian
  • Malic, Ermin
The optical properties of monolayer transition metal dichalcogenides are dominated by tightly-bound excitons. They form at distinct valleys in reciprocal space, and can interact via the valley-exchange coupling, modifying their dispersion considerably. Here, we predict that angle-resolved photoluminescence can be used to probe the changes of the excitonic dispersion. The exchange-coupling leads to a unique angle dependence of the emission intensity for both circularly and linearly-polarised light. We show that these emission characteristics can be strongly tuned by an external magnetic field due to the valley-specific Zeeman-shift. We propose that angle-dependent photoluminescence measurements involving both circular and linear optical polarisation as well as magnetic fields should act as strong verification of the role of valley-exchange coupling on excitonic dispersion and its signatures in optical spectra, This project has received funding from the Excellence Initiative Nano at Chalmers and the Knut and Alice Wallenberg Foundation via the Grant KAW 2019.0140. W. W. acknowledges support by the Knut and Alice Wallenberg foundation through a Wallenberg Academy Fellowship (No. 2019.0231) and by the Carl Tryggers foundation (CTS 19:406). Furthermore, we are thankful to the Deutsche Forschungsgemeinschaft (DFG) via CRC 1083 and the European Unions Horizon 2020 research and innovation programme under grant agreement no. 881603 (Graphene Flagship). We acknowledge the Vinnova competence centre ‘‘2D-TECH’’. C. S. gratefully acknowledges support of the European Research Council (ERC) within the project UnLimit2D (Project No. 679288), and the DFG within project SCHN1376 11.1
Docta Complutense
Publication Artículo científico (JournalArticle)

BODIPY doping of covalent organic frameworks-based nanomaterials: A novel strategy towards biomedical applications

  • Suárez Blas, Fátima
  • Martínez Fernández, Marcos
  • Prieto Castañeda, Alejandro
  • García Fernández, Alba
  • Martínez Ruíz, José I.
  • Ramos Gallego, María Mar
  • Ortiz García, María Josefa
  • Martínez Máñez, Ramón
  • Segura Castedo, José Luis
Covalent organic Frameworks (COFs) are a class of crystalline macromolecular materials build-up by monomers with specific symmetries or functionalities. There are important limitations in the synthesis of highly ordered COFs, such as the shape and packing of the building blocks. Thus, the presence of fluorine atoms that lie perpendicular to the bisecting plane of BODIPY derivatives together with the presence of four bulky methyl groups could hinder the crystallization process in COF synthesis. For that reason, BODIPY-based COFs are rarely incorporated to COF networks. In this work, following the mixed linker strategy, a pre-synthetic method to dope COF structures with BODIPY units was developed. The materials have been processed into fluorescent Covalent Organic Nanosheets (CONs) with defined particle-size distributions around 100 nm, suitable for cellular biomedical applications. The viability of the CONs was evaluated using Sk-Mel-103 cells, demonstrating the internalization showing 100% cell viability. We envisage that this work could accelerate the discovery of new COF-based materials for biomedical sciences
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Graphene-based microelectrodes with bidirectional functionality for next-generation retinal electronic interfaces

  • Duvan, Fikret Taygun|||0000-0002-3377-9351
  • Cunquero, Marina|||0000-0001-8093-8186
  • Masvidal Codina, Eduard|||0000-0002-9579-8603
  • Walston, Steven T.|||0000-0003-4567-8926
  • Marsal, Maria|||0000-0001-9678-8717
  • de la Cruz, Jose Manuel
  • Viana, Damia|||0000-0001-8558-986X
  • Nguyen, Diep
  • Dégardin, Julie
  • Illa, Xavi|||0000-0002-3212-1128
  • Zhang, Julie Meng|||0000-0001-5985-3815
  • Bernicola, María del Pilar|||0000-0002-8124-2567
  • Macias Montero, Jose Gabriel
  • Puigdengoles, Carles|||0000-0002-1372-5452
  • Castro-Olvera, Gustavo|||0000-0001-9843-3581
  • Del Corro, Elena|||0000-0001-6452-9139
  • Dokos, Socrates
  • Chmeissani, Mokhtar|||0000-0002-2287-4791
  • Loza-Alvarez, Pablo|||0000-0002-3129-1213
  • Picaud, Serge|||0000-0002-0548-5145
  • Garrido, Jose|||0000-0001-5621-1067
Neuroelectronic prostheses are being developed for restoring vision at the retinal level in patients who have lost their sight due to photoreceptor loss. The core component of these devices is the electrode array, which enables interfacing with retinal neurons. Generating the perception of meaningful images requires high-density microelectrode arrays (MEAs) capable of precisely activating targeted retinal neurons. Achieving this precision necessitates the downscaling of electrodes to micrometer dimensions. However, miniaturization increases electrode impedance, which poses challenges by limiting the amount of current that can be delivered, thereby impairing the electrode's capability for effective neural modulation. Additionally, it elevates noise levels, reducing the signal quality of the recorded neural activity. This report focuses on evaluating reduced graphene oxide (rGO) based devices for interfacing with the retina, showcasing their potential in vision restoration. Our findings reveal low impedance and high charge injection limit for microscale rGO electrodes, confirming their suitability for developing next-generation high-density retinal devices. We successfully demonstrated bidirectional interfacing with cell cultures and explanted retinal tissue, enabling the identification and modulation of multiple cells' activity. Additionally, calcium imaging allowed real-time monitoring of retinal cell dynamics, demonstrating a significant reduction in activated areas with small-sized electrodes. Overall, this study lays the groundwork for developing advanced rGO-based MEAs for high-acuity visual prostheses.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Functioning human lung organoids model pulmonary tissue response from carbon nanomaterial exposures

  • Issa, Rahaf
  • Lozano, Neus|||0000-0002-9026-1743
  • Kostarelos, Kostas|||0000-0002-2224-6672
  • Vranic, Sandra|||0000-0002-6653-7156
Human lung organoids (HLOs) are increasingly used to model development and infectious diseases, however their ability to recapitulate functional pulmonary tissue response to nanomaterial (NM) exposures has yet to be demonstrated. Here, we established a lung organoid exposure model that utilises microinjection to present NMs into the lumen of organoids. Our model assures efficient, reproducible and controllable exposure of the apical pulmonary epithelium, emulating real-life human exposure scenario. By comparing the impact of two well studied carbon-based NMs, graphene oxide sheets (GO) and multi-walled carbon nanotubes (MWCNT), we validated lung organoids as tools for predicting pulmonary NM-driven responses. In agreement with established in vivo data, we demonstrate that MWCNT, but not GO, elicit adverse effects on lung organoids, leading to a pro-fibrotic phenotype. Our findings reveal the capacity and suitability of HLOs for hazard assessment of NMs, aligned with the much sought-out 3Rs (animal research replacement, reduction, refinement) framework.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Interfacial Phenomena Governing Performance of Graphene Electrodes in Aqueous Electrolyte

  • Delgà-Fernández, Marta|||0000-0001-7434-8593
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Pérez-Marín, Antonio Pablo|||0000-0003-1843-8273
  • Marin, Enrique G|||0000-0002-0302-3764
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Garrido, Jose|||0000-0001-5621-1067
  • Del Corro, Elena|||0000-0001-6452-9139
There is evidence of the presence of intercalated water between graphene and the substrate in electronic devices. However, a proper understanding of the impact of this phenomenon, which causes important limitations for the optimization of graphene-based devices operating in aqueous electrolytes, is missing. We used graphene-based electrodes on insulating and conducting substrates to evaluate the impact of intercalated water by combining experimental techniques with numerical simulations. Results show that the capacitance of the conductive substrate/graphene electrodes is significantly higher than that of the insulating substrate/graphene ones. Meanwhile, Raman spectroscopy demonstrates that graphene charge modulation with the applied potential is independent of the substrate conductivity. We found that this intriguing behavior is influenced by the water intercalation phenomena and governed by the substrate conductive nature. This work contributes to the understanding of the electric response of graphene-based devices in an aqueous environment and of the methods to measure and model it.
Dipòsit Digital de Documents de la UAB
Publication Reseña (Review)

Spintronics with two-dimensional materials and van der Waals heterostructures

  • Roche, Stephan|||0000-0003-0323-4665
  • van Wees, Bart|||0000-0002-4179-8456
  • Garello, Kevin|||0000-0003-0236-322X
  • Valenzuela, Sergio O.|||0000-0002-4632-8891
We briefly summarize more than fifteen years of intense research in 2D materials (2DM)-based spintronics, which has led to an in-depth understanding of fundamental spin transport mechanisms, novel functionalities in magnetic tunnel junctions and spin orbit torque devices, and the formidable and unprecedented capability of proximity effects to make graphene a spin active material. Although the portfolio of functional 2DM-based devices and related heterostructures is continuously increasing, we outline key technological challenges that are still impeding practical spintronic applications in spin-logics and non-volatile memory technologies. We conclude by mentioning current and future directions which will maintain the momentum of the field of ultracompact spintronics based on 2DM and van der Waals heterostructures.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The impact of graphene oxide nanosheet lateral dimensions on the electrochemical performance of nanoporous graphene-based electrodes

  • Bernicola, María del Pilar|||0000-0002-8124-2567
  • Madrid-Gimeno, Miquel
  • Murillo Cremaes, Nerea
  • Battisti, Tommaso
  • Lozano, Neus|||0000-0002-9026-1743
  • Kostarelos, Kostas|||0000-0002-2224-6672
  • Garrido, Jose|||0000-0001-5621-1067
  • Del Corro, Elena|||0000-0001-6452-9139
Electrodes based on nanoporous reduced graphene oxide (rGO) have been developed as the interfacing component in different designs of neural implants in a variety of therapeutic and monitoring applications. The starting graphene oxide (GO) nanosheets lateral dimensions influenced the staking order, roughness and thickness of the derived rGO films, including the formation of nanochannels. Apart from the morphological differences observed, the GO lateral dimension also impacted on the film conductivity, and on the overall electrochemical performance of the rGO electrodes. While electrodes fabricated from nano-scale GO sheets (us-GO) only showed diffusion-limited impedance in the high frequency regime, the electrical response of electrodes from micron-scale GO sheets (L-GO) was limited by diffusion in the whole frequency range due to a less disordered nanoporous film. At 1 kHz, us-GO electrodes, due to their larger capacitance, presented a higher charge injection limit (Qinj.l.) than L-GO electrodes. Due to the higher conductivity of L-GO, electrodes exhibited half the ohmic drop (IR) of electrodes made of us-GO,. This work highlights the importance of GO nanosheet engineering to optimize the performance of rGO electrodes in terms of Qinj.l. and IR, two key figures of merit in neuroelectronic applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Concurrent functional ultrasound imaging with graphene-based DC-coupled electrophysiology as a platform to study slow brain signals and cerebral blood flow under control and pathophysiological brain states

  • Zhang, Julie Meng|||0000-0001-5985-3815
  • Masvidal Codina, Eduard|||0000-0002-9579-8603
  • Nguyen, Diep
  • Illa, Xavi|||0000-0002-3212-1128
  • Dégardin, Julie
  • Goulet, Ruben
  • Prats-Alfonso, Elisabet
  • Matsoukis, Stratis
  • Guger, Christoph
  • Garrido, Jose Antonio
  • Picaud, Serge|||0000-0002-0548-5145
  • Guimerà-Brunet, Anton
  • Wykes, Robert C|||0000-0002-6141-6822
Current methodology used to investigate how shifts in brain states associated with regional cerebral blood volume (CBV) change in deep brain areas, are limited by either the spatiotemporal resolution of the CBV techniques, and/or compatibility with electrophysiological recordings; particularly in relation to spontaneous brain activity and the study of individual events. Additionally, infraslow brain signals (<0.1 Hz), including spreading depolarisations, DC-shifts and infraslow oscillations (ISO), are poorly captured by traditional AC-coupled electrographic recordings; yet these very slow brain signals can profoundly change CBV. To gain an improved understanding of how infraslow brain signals couple to CBV we present a new method for concurrent CBV with wide bandwidth electrophysiological mapping using simultaneous functional ultrasound imaging (fUS) and graphene-based field effect transistor (gFET) DC-coupled electrophysiological acquisitions. To validate the feasibility of this methodology visually-evoked neurovascular coupling (NVC) responses were examined. gFET recordings are not affected by concurrent fUS imaging, and epidural placement of gFET arrays within the imaging window did not deteriorate fUS signal quality. To examine directly the impact of infra-slow potential shifts on CBV, cortical spreading depolarisations (CSDs) were induced. A biphasic pattern of decreased, followed by increased CBV, propagating throughout the ipsilateral cortex, and a delayed decrease in deeper subcortical brain regions was observed. In a model of acute seizures, CBV oscillations were observed prior to seizure initiation. Individual seizures occurred on the rising phase of both infraslow brain signal and CBV oscillations. When seizures co-occurred with CSDs, CBV responses were larger in amplitude, with delayed CBV decreases in subcortical structures. Overall, our data demonstrate that gFETs are highly compatible with fUS and allow concurrent examination of wide bandwidth electrophysiology and CBV. This graphene-enabled technological advance has the potential to improve our understanding of how infraslow brain signals relate to CBV changes in control and pathological brain states.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

High-Data-Rate Modulators Based on Graphene Transistors, Device Circuit Co-Design Proposals †

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Ramos Silva, Javier Noé|||0000-0002-7644-6215
  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Ramirez-Garcia, Eloy|||0000-0002-2594-621X
  • Jiménez, David|||0000-0002-8148-198X
The multifunctionality feature of graphene field-effect transistors (GFETs) is exploited here to design circuit building blocks of high-data-rate modulators by using a physics-based compact model. Educated device performance projections are obtained with the experimentally calibrated model and used to choose an appropriate improved feasible GFET for these applications. Phase-shift and frequency-shift keying (PSK and FSK) modulation schemes are obtained with (Formula presented.) (Formula presented.) (Formula presented.) GFET-based multifunctional circuits used alternatively in different operation modes: inverting and in-phase amplification and frequency multiplication. An adequate baseband signal applied to the transistors' input also serves to enhance the device and circuit performance reproducibility since the impact of traps is diminished. Quadrature PSK is also achieved by combining two GFET-based multifunctional circuits. This device circuit co-design proposal intends to boost the heterogeneous implementation of graphene devices with incumbent technologies into a single chip: the baseband pulses can be generated with CMOS technology as a front end of line and the multifunctional GFET-based circuits as a back end of line.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Pulmonary Toxicity of Boron Nitride Nanomaterials Is Aspect Ratio Dependent

  • Visani de Luna, Luis Augusto
  • Loret, Thomas|||0000-0001-9171-9819
  • He, Yilin
  • Legnani, Morgan
  • Lin, Hazel
  • Galibert, Anne Marie
  • Fordham, Alexander|||0000-0002-9093-408X
  • Holme, Sonja
  • Del Rio Castillo, Antonio Esau
  • Bonaccorso, Francesco|||0000-0001-7238-9420
  • Bianco, Alberto|||0000-0002-1090-296X
  • Flahaut, Emmanuel|||0000-0001-8344-6902
  • Kostarelos, Kostas|||0000-0002-2224-6672
  • Bussy, Cyrill|||0000-0001-8870-443X
Boron nitride (BN) nanomaterials have drawn a lot of interest in the material science community. However, extensive research is still needed to thoroughly analyze their safety profiles. Herein, we investigated the pulmonary impact and clearance of two-dimensional hexagonal boron nitride (h -BN) nanosheets and boron nitride nanotubes (BNNTs) in mice. Animals were exposed by single oropharyngeal aspiration to h -BN or BNNTs. On days 1, 7, and 28, bronchoalveolar lavage (BAL) fluids and lungs were collected. On one hand, adverse effects on lungs were evaluated using various approaches (e.g., immune response, histopathology, tissue remodeling, and genotoxicity). On the other hand, material deposition and clearance from the lungs were assessed. Two-dimensional h -BN did not cause any significant immune response or lung damage, although the presence of materials was confirmed by Raman spectroscopy. In addition, the low aspect ratio h -BN nanosheets were internalized rapidly by phagocytic cells present in alveoli, resulting in efficient clearance from the lungs. In contrast, high aspect ratio BNNTs caused a strong and long-lasting inflammatory response, characterized by sustained inflammation up to 28 days after exposure and the activation of both innate and adaptive immunity. Moreover, the presence of granulomatous structures and an indication of ongoing fibrosis as well as DNA damage in the lung parenchyma were evidenced with these materials. Concurrently, BNNTs were identified in lung sections for up to 28 days, suggesting long-term biopersistence, as previously demonstrated for other high aspect ratio nanomaterials with poor lung clearance such as multiwalled carbon nanotubes (MWCNTs). Overall, we reveal the safer toxicological profile of BN-based two-dimensional nanosheets in comparison to their nanotube counterparts. We also report strong similarities between BNNTs and MWCNTs in lung response, emphasizing their high aspect ratio as a major driver of their toxicity.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Orbital Hall responses in disordered topological materials

  • Canonico, Luis M.|||0000-0001-9266-7213
  • Garcia, José H.|||0000-0002-5752-4759
  • Roche, Stephan|||0000-0003-0323-4665
We report an efficient numerical approach to compute the different components of the orbital Hall responses in disordered topological materials from the Berry phase theory of magnetization. The theoretical framework is based on the Chebyshev expansion of Green's functions and the off-diagonal elements of the position operator for systems under arbitrary boundary conditions. The capability of this scheme is shown by computing the orbital Hall conductivity for gapped graphene and for the Haldane model in the presence of nonperturbative disorder effects. This methodology enables realistic simulations of orbital Hall responses in highly complex models of disordered materials.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Upper limit of spin relaxation in suspended graphene

  • Cummings, Aron|||0000-0003-2307-497X
  • Dubois, Simon M.M.|||0000-0003-2565-859X
  • Alcázar Guerrero, Pedro|||0000-0002-4852-2620
  • Charlier, Jean Christophe|||0000-0002-5749-1328
  • Roche, Stephan|||0000-0003-0323-4665
We use a combination of molecular dynamics and quantum transport simulations to investigate the upper limit of spin transport in suspended graphene. We find that thermally-induced atomic-scale corrugations are the dominant factor, limiting spin lifetimes to ∼10 ns by inducing a strongly-varying local spin-orbit coupling. These extremely short-range corrugations appear even when the height profile appears to be smooth, suggesting they may be present in any graphene device. We discuss our results in the context of experiments, and briefly consider approaches to suppress these short-range corrugations and further enhance spin lifetimes in graphene-based spin devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Spin-Orbit Torques and Magnetization Switching in (Bi,Sb)2Te3/Fe3GeTe2 Heterostructures Grown by Molecular Beam Epitaxy

  • Guillet, Thomas|||0000-0002-0767-7124
  • Galceran, Regina|||0000-0002-2080-2575
  • Sierra, Juan F.|||0000-0002-5438-0534
  • Belarre, Francisco J.|||0000-0002-9328-6006
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Costache, Marius Vasile|||0000-0001-7432-6175
  • Dosenovic, Djordje
  • Okuno, Hanako|||0000-0002-7688-9526
  • Marty, Alain|||0000-0001-5709-6945
  • Jamet, Matthieu|||0000-0002-8247-4677
  • Bonell, Frédéric|||0000-0001-7296-0404
  • Valenzuela, Sergio O.|||0000-0002-4632-8891
Topological insulators (TIs) hold promise for manipulating the magnetization of a ferromagnet (FM) through the spin-orbit torque (SOT) mechanism. However, integrating TIs with conventional FMs often leads to significant device-to-device variations and a broad distribution of SOT magnitudes. In this work, we present a scalable approach to grow a full van der Waals FM/TI heterostructure by molecular beam epitaxy, combining the charge-compensated TI (Bi,Sb)Te with 2D FM FeGeTe (FGT). Harmonic magnetotransport measurements reveal that the SOT efficiency exhibits a non-monotonic temperature dependence and experiences a substantial enhancement with a reduction of the FGT thickness to 2 monolayers. Our study further demonstrates that the magnetization of ultrathin FGT films can be switched with a current density of J ∼ 10 A/m, with minimal device-to-device variations compared to previous investigations involving traditional FMs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Physics-based bias-dependent compact modeling of 1/f noise in single- to few-layer 2D-FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Alam, Hasibul|||0000-0002-4923-0873
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Martinez, Javier
  • Garrido, Jose|||0000-0001-5621-1067
  • Akinwande, Deji|||0000-0001-7133-5586
  • Jiménez, David|||0000-0002-8148-198X
1/f noise is a critical figure of merit for the performance of transistors and circuits. For two-dimensional devices (2D-FETs), and especially for applications in the GHz range where short-channel FETs are required, the velocity saturation (VS) effect can result in the reduction of 1/f noise at high longitudinal electric fields. A new physics-based compact model has been for the first time introduced for single- to few-layer 2D-FETs in this study, precisely validating 1/f noise experiments for various types of devices. The proposed model mainly accounts for the measured 1/f noise bias dependence as the latter is defined by different physical mechanisms. Thus, analytical expressions are derived, valid in all regions of operation in contrast to conventional approaches available in the literature so far, accounting for carrier number fluctuation (ΔN), mobility fluctuation (Δμ) and contact resistance (ΔR) effects based on the underlying physics that rules these devices. The ΔN mechanism due to trapping/detrapping together with an intense Coulomb scattering effect dominates the 1/f noise from the medium to the strong accumulation region while Δμ has also been demonstrated to modestly contribute in the subthreshold region. ΔR can also be significant in a very high carrier density. The VS induced reduction of 1/f noise measurements at high electric fields was also remarkably captured by the model. The physical validity of the model can also assist in extracting credible conclusions when conducting comparisons between experimental data from devices with different materials or dielectrics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Freestanding laser-induced two dimensional heterostructures for self-contained paper-based sensors

  • Della Pelle, Flavio|||0000-0002-8877-7580
  • Bukhari, Qurat Ul Ain
  • Álvarez Diduk, Ruslan|||0000-0002-9876-1574
  • Scroccarello, Annalisa
  • Compagnone, Dario|||0000-0001-7849-8943
  • Merkoçi, Arben|||0000-0003-2486-8085
The production of 2D/2D heterostructures (HTs) with favorable electrochemical features is challenging, particularly for semiconductor transition metal dichalcogenides (TMDs). In this studies, we introduce a CO laser plotter-based technology for the realization of HT films comprising reduced graphene oxide (rGO) and 2D-TMDs (MoS, WS, MoSe, and WSe) produced via water phase exfoliation. The strategy relies on the Laser-Induced production of HeterosTructures (LIHTs), where after irradiation the nanomaterials exhibit changes in the morphological and chemical structure, becoming conductive easily transferable nanostructured films. The LIHTs were characterized in detail by SEM, XPS, Raman and electrochemical analysis. The laser treatment induces the conversion of GO into conductive highly exfoliated rGO decorated with homogeneously distributed small TMD/TM-oxide nanoflakes. The freestanding LIHT films obtained were employed to build self-contained sensors onto nitrocellulose, where the HT works both as a transducer and sensing surface. The proposed nitrocellulose-sensor manufacturing process is semi-automated and reproducible, multiple HT films may be produced in the same laser treatment and the stencil-printing allows customizable design. Excellent performance in the electroanalytical detection of different molecules such as dopamine (a neurotransmitter), catechin (a flavonol), and hydrogen peroxide was demonstrated, obtaining nanomolar limits of detection and satisfactory recovery rates in biological and agrifood samples, together with high fouling resistance. Considering the robust and rapid laser-induced production of HTs and the versatility of scribing desired patterns, the proposed approach appears as a disruptive technology for the development of electrochemical devices through sustainable and accessible strategies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Orbital Hall effect and topology on a two-dimensional triangular lattice, From bulk to edge

  • Barbosa, Anderson L. R.|||0000-0002-7652-958X
  • Canonico, Luis M.|||0000-0001-9266-7213
  • Garcia, José H.|||0000-0002-5752-4759
  • Rappoport, Tatiana Gabriela|||0000-0002-1878-5956
We investigate a generalized multiorbital tight-binding model on a triangular lattice, a system prevalent in a wide range of two-dimensional materials and particularly relevant for simulating transition metal dichalcogenide monolayers. We show that the interplay between spin-orbit coupling and different symmetry-breaking mechanisms leads to the emergence of four distinct topological phases [Eck, Phys. Rev. B 107, 115130 (2023)2469-995010.1103/PhysRevB.107.115130]. Remarkably, this interplay also triggers the orbital Hall effect with distinguished characteristics. Furthermore, by employing the Landauer-Büttiker formula, we establish that in the orbital Hall insulating phase, the orbital angular momentum is carried by edge states present in nanoribbons with specific terminations. We also show that they do not have the same topological protection against the disorder of the edge states as a first-order topological insulator.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Towards wafer-scale 2D material sensors

  • Steeneken, Peter G.|||0000-0002-5764-1218
  • Soikkeli, Miika
  • Arpiainen, Sanna
  • Rantala, Arto
  • Jaaniso, Raivo
  • Pezone, Roberto
  • Vollebregt, Sten|||0000-0001-6012-6180
  • Lukas, Sebastian|||0000-0002-8062-2832
  • Kataria, Satender
  • Houmes, Maurits J. A.
  • Álvarez Diduk, Ruslan|||0000-0002-9876-1574
  • Lee, Kangho|||0000-0002-6495-5231
  • Suryo Wasisto, Hutomo
  • Anzinger, Sebastian|||0000-0002-6272-590X
  • Fueldner, Marc
  • Verbiest, Gerard J.|||0000-0002-1712-1234
  • Alijani, Farbod
  • Hoon Shin, Dong
  • Malic, Ermin
  • van Rijn, Richard
  • Nevanen, Tarja K.
  • Centeno, Alba|||0000-0001-8442-2283
  • Zurutuza, Amaia
  • van der Zant, Herre S. J.
  • Merkoçi, Arben|||0000-0003-2486-8085
  • Duesberg, Georg S.|||0000-0002-7412-700X
  • Lemme, Max C.|||0000-0003-4552-2411
The unique properties of two-dimensional (2D) materials bring great promise to improve sensor performance and realise novel sensing principles. However, to enable their high-volume production, wafer-scale processes that allow integration with electronic readout circuits need to be developed. In this perspective, we review recent progress in on-chip 2D material sensors, and compare their performance to the state-of-the-art, with a focus on results achieved in the Graphene Flagship programme. We discuss transfer-based and transfer-free production flows and routes for complementary metal-oxide-semiconductor integration and prototype development. Finally, we give an outlook on the future of 2D material sensors, and sketch a roadmap towards realising their industrial and societal impact.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Displacement Current in Classical and Quantum Systems

  • Ferry, David K.|||0000-0002-0942-8033
  • Oriols, Xavier|||0000-0003-2181-4284
  • Eisenberg, Robert|||0000-0002-4860-5434
It is certain that electrical properties-whether slow (sec) or fast (nsec), even optical (fsec)-are described by Maxwell's equations, and there are terms that depend on the rate of the change of the electric and magnetic fields. In particular, Maxwell's equation for the curl of the magnetic field contains both the steady-state conduction current and a term depending upon the temporal derivative of the electric displacement field. The latter is referred to as the displacement current and is generally believed to have been included originally by Maxwell himself, although there is evidence it was earlier considered by Kirchhoff. Maxwell's equations and Kirchoff's circuit laws both are important over the wide range of frequencies with which electronics traditionally deal. Additionally, the displacement current is an important contribution to these in both classical and quantum mechanics. Here, the development of the displacement current, its importance in both classical and quantum mechanics, and some applications are provided to illustrate the fundamental role that it plays in the dynamics of a wide range of systems.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Physics-Based Compact Modeling for the Drain Current Variability in Single-Layer Graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Garcia Cortadella, Ramon|||0000-0002-1506-6534
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Garrido, Jose|||0000-0001-5621-1067
  • Jiménez, David|||0000-0002-8148-198X
For the growth of emerging graphene field effect transistor (GFET) technologies, a thorough characterization of on-wafer variability is required. Here, we report for the first time a physics-based compact model, which precisely describes the drain current (ID) fluctuations of monolayer GFETs. Physical mechanisms known to generate 1/f noise in transistors, such as carrier number and Coulomb scattering mobility fluctuations, are also revealed to cause (ID) variance. Such effects are considered in the model by being activated locally in the channel and the integration of their contributions from source to drain results in total variance. The proposed model is experimentally validated from a statistical population of three different-sized solution-gated (SG) GFETs from strong p- to strong n-type bias conditions. A series resistance (ID) variance model is also derived mainly contributing at high carrier densities.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Safety Assessment of Graphene-Based Materials

  • Fadeel, Bengt|||0000-0001-5559-8482
  • Baker, James
  • Ballerini, Laura|||0000-0001-8420-0787
  • Bussy, Cyrill|||0000-0001-8870-443X
  • Candotto Carniel, Fabio
  • Tretiach, Mauro
  • Pelin, Marco
  • Buerki-Thurnherr, Tina
  • Kanerva, Tomi
  • Navas, José Maria
  • Vázquez, Ester|||0000-0003-3223-8024
  • Rodriguez Unamuno, Virginia
  • Lehtonen, Panja
  • González, Mar
  • Rauscher, Hubert
  • Riego Sintes, Juan
  • Kostarelos, Kostas|||0000-0002-2224-6672
  • Bianco, Alberto|||0000-0002-1090-296X
  • Prato, Maurizio|||0000-0002-8869-8612
Graphene is the first 2D atomic crystal, and its isolation heralded a new era in materials science with the emergence of several other atomically thin materials displaying multifunctional properties. The safety assessment of new materials is often something of an afterthought, but in the case of graphene, the initial isolation and characterization of the material was soon followed by the assessment of its potential impact on living systems. The Graphene Flagship project addressed the health and environmental aspects of graphene and other 2D materials, providing an instructive lesson in interdisciplinarity - from materials science to biology. Here, the outcomes of the toxicological and ecotoxicological studies performed on graphene and its derivatives, and the key lessons learned from this decade-long journey, are highlighted.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The gate tunable 2D pn junction driven out-of-equilibrium

  • Chaves Romero, Ferney Alveiro|||0000-0001-9506-4485
  • Jiménez, David|||0000-0002-8148-198X
We have investigated the electrostatics and electronic transport of the gate tunable 2D pn junction by implementing a comprehensive physics-based simulator that self-consistently solves the 2D Poisson's equation coupled to the drift-diffusion current and continuity equations. The simulator considers the strong influence of the out-of-plane electric field through the gate dielectric and the presence of interface states. The impact of parameters such as gate capacitance, energy gap, and interface trap states density have been considered to model properties such as the depletion width, rectification factor, and depletion and diffusion capacitances. The present work opens the door to a wider exploration of potential advantages that gate tunable 2D pn junctions could bring in terms of figures of merit.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A Graphene Field-Effect Transistor Based Analogue Phase Shifter for High-Frequency Applications

  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Cuesta-López, Juan|||0000-0001-7905-9969
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Jiménez, David|||0000-0002-8148-198X
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
We present a graphene-based phase shifter for radio-frequency (RF) phase-array applications. The core of the designed phase-shifting system consists of a graphene field-effect transistor (GFET) used in a common source amplifier configuration. The phase of the RF signal is controlled by exploiting the quantum capacitance of graphene and its dependence on the terminal transistor biases. In particular, by independently tuning the applied gate-to-source and drain-to-source biases, we observe that the phase of the signal, in the super-high frequency band, can be varied nearly 200° with a constant gain of 2.5 dB. Additionally, if only the gate bias is used as control signal, and the drain is biased linearly dependent on the former (i.e., in a completely analogue operation), a phase shift of 85° can be achieved making use of just one transistor and keeping a gain of 0 dB with a maximum variation of 1.3 dB. The latter design can be improved by applying a balanced branch-line configuration showing to be competitive against other state-of-the-art phase shifters. This work paves the way towards the exploitation of graphene technology to become the core of active analogue phase shifters for high-frequency operation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Non-quasi-static effects in graphene field-effect transistors under high-frequency operation

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Jiménez, David|||0000-0002-8148-198X
We investigate the non-quasi-static (NQS) effects in graphene field-effect transistors (GFETs), which are relevant for the device operation at high frequencies as a result of significant carrier inertia. A small-signal NQS model is derived from the analytical solution of drift-diffusion equation coupled with the continuity equation, which can be expressed in terms of modified Bessel functions of the first kind. The NQS model can be conveniently simplified to provide an equivalent circuit of lumped elements ready to be used in standard circuit simulators. Taking into account only first-order NQS effects, accurate GFET-based circuit simulations up to several times the cutoff frequency (fT) can be performed. Notably, it reduces to the quasi-static (QS) approach when the operation frequency is below ~fT/4. To validate the NQS model, we have compared its outcome against simulations based on a multisegment approach consisting of breaking down the channel length in N equal segments described by the QS model each one.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Contact resistance extraction of graphene FET technologies based on individual device characterization

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Jiménez, David|||0000-0002-8148-198X
Straightforward contact resistance extraction methods based on electrical device characteristics are described and applied here to graphene field-effect transistors from different technologies. The methods are an educated adaptation of extraction procedures originally developed for conventional transistors by exploiting the drift-diffusion-like transport in graphene devices under certain bias conditions. In contrast to other available approaches for contact resistance extraction of graphene transistors, the practical methods used here do not require either the fabrication of dedicated test structures or internal device phenomena characterization. The methodologies are evaluated with simulation-based data and applied to fabricated devices. The extracted values are close to the ones obtained with other more intricate methodologies. Bias-dependent contact and channel resistances studies, bias-dependent high-frequency performance studies and contact engineering studies are enhanced and evaluated by the extracted contact resistance values.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A Scalable Compact Model for the Static Drain Current of Graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Txoperena, Oihana
  • Torres, Elias
  • Jiménez, David|||0000-0002-8148-198X
The main target of this article is to propose for the first time a physics-based continuous and symmetric compact model that accurately captures I-V experimental dependencies induced by geometrical scaling effects for graphene field-effect transistor (GFET) technologies. Such a scalable model is an indispensable ingredient for the boost of large-scale GFET applications, as it has been already proved in solid industry-based CMOS technologies. Dependencies of the physical model parameters on channel dimensions are thoroughly investigated, and semi-empirical expressions are derived, which precisely characterize such behaviors for an industry-based GFET technology, as well as for others developed in research laboratory. This work aims at the establishment of the first industry standard GFET compact model that can be integrated in circuit simulation tools and, hence, can contribute to the update of GFET technology from the research level to massive industry production.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Accuracy of Y-function methods for parameters extraction of two-dimensional FETs across different technologies

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Jiménez, David|||0000-0002-8148-198X
The accuracy of contact resistance values of two-dimensional (2D) field-effect transistors extracted with the Y-function considering the impact of the intrinsic mobility degradation is evaluated here. The difference between methodologies that take this factor into account and ignore it is pointed out by a detailed analysis of the approximations of the transport model used for each extraction. In contrast to the oftenly used approach where the intrinsic mobility degradation is neglected, a Y-function-based method considering a more complete transport model yields contact resistance values similar to reference values obtained by other intricate approaches. The latter values are more suitable also to describe experimental data of 2D devices of different technologies. The intrinsic mobility degradation factor of 2D transistors is experimentally characterised for the first time and its impact on the device performance is described and evaluated.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Compact Modeling of pH-Sensitive FETs Based on 2-D Semiconductors

  • Grour, Tarek El|||0000-0003-2963-7104
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Najari, Montassar|||0000-0002-5382-8528
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Jiménez, David|||0000-0002-8148-198X
  • Mir, Lassaad El
We present a physics-based circuit-compatible model for pH-sensitive field-effect transistors based on 2-D materials. The electrostatics along the electrolyte-gated 2-D-semiconductor stack is treated by solving the Poisson equation, including the site-binding model and the Gouy-Chapman-Stern approach, while the carrier transport is described by the drift-diffusion theory. The proposed model is provided in an analytical form and then implemented in Verilog-A, making it compatible with standard technology computer-aided design tools employed for circuit simulation. The model is benchmarked against two experimental transition-metal-dichalcogenide (MoS2 and ReS2)-based ion sensors, showing excellent agreement when predicting the drain current, threshold voltage shift, and current/voltage sensitivity measurements for different pH concentrations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Static and small-signal modeling of radiofrequency hexagonal boron nitride switches

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Jordan-Garcia, Omar
  • Ramirez-Garcia, Eloy|||0000-0002-2594-621X
  • Jiménez, David|||0000-0002-8148-198X
A first modeling approximation of the general performance of radiofrequency (RF) switches based on hexagonal boron nitride (hBN), a two-dimensional (2D) dielectric material is presented. The I-V characteristics intrinsic and extrinsic impedance parameters, the return loss, insertion loss and isolation of RF 2D switches fabricated with hBN are described here by a equivalent circuit models. Straightforward analytical expressions are obtained. In contrast to conventional switches, the unique RF performance of the hBN switch, at ON-state, i.e., a direct improvement with frequency of the insertion loss, is accurately described by considering a capacitor in the intrinsic part of the model. The latter is suggested to be related to storaged charge during the resistive switching mechanism. The highest mean relative error obtained between modeling and measurements of the return loss is of 7.6% with the approach presented here which overcomes the 42.5% of difference obtained with a previous model with an incomplete intrinsic device description.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Input-Referred Low-Frequency Noise Analysis for Single-Layer Graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Jiménez, David|||0000-0002-8148-198X
The bias dependence of input-referred low-frequency noise (LFN), SVG, is a considerable facet for RF circuit design. SVG was considered constant in CMOS but this was contradicted by recent experimental and theoretical studies. In this brief, the behavior of SVG is investigated for single-layer graphene transistors (GFETs) based on a recently established physics-based compact model. A minimum of SVG is recorded at the bias point where transconductance is maximum which coincides with the peak of the well-known M-shape of the normalized output LFN; the model precisely captures this trend. Mobility fluctuation effect increases SVG toward lower currents near charge neutrality point (CNP), while carrier number fluctuation and series resistance effects mostly contribute away from CNP; thus, SVG obtains a parabolic shape versus gate voltage similar to CMOS devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Characterization Methodology for Voltage-Dependent Mobility of Charge Carriers in Graphene FETs Using Single-Device Microwave Measurements

  • Ribero-Figueroa, Xiomara|||0000-0001-8500-1106
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Mansouri, Aida
  • Kumar, Pankaj
  • Habibpour, Omid|||0000-0002-0153-0308
  • Zirath, Herbert|||0000-0002-5721-4793
  • Anzi, Luca|||0000-0002-8212-1337
  • Zurutuza, Amaia|||0000-0001-6376-0224
  • Sordan, Roman|||0000-0001-7373-0643
  • Jiménez, David|||0000-0002-8148-198X
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Torres-Torres, Reydezel|||0000-0003-0906-4038
This work proposes a methodology entirely based on processing S-parameters to determine the gate-to-source voltage-dependent mobility of charge carriers in the graphene field-effect transistor channel, without requiring any information about the material properties. Furthermore, regressions from experimental data of transistor arrays with different geometries are not required, thus avoiding uncertainties related to process variations and device-to-device measurement conditions. Hence, one key advantage of this method is its applicability to analyze the performance of different devices under the same operating conditions, or the performance of a single device under varying conditions. As part of the methodology, the effects of the parasitic series resistances associated with the source and drain access paths are considered, thereby overcoming the well-known disadvantage of direct-current methods, where the corresponding de-embedding is cumbersome. This method has been used to determine the carrier mobility in graphene within a gate-to-source voltage range, starting from the Dirac voltage and extending to the region where electron conduction dominates. A small-signal model with the extracted parameter values shows an excellent agreement with the experimental S-parameters up to 20 GHz for the dynamic response of different devices, including two devices that have not been used during parameter extraction. Throughout the development and application of the proposal, a mobility model accounting for the degradation caused by the transverse electric field has been considered.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Exploiting Ambipolarity in Graphene Field-Effect Transistors for Novel Designs on High-Frequency Analog Electronics

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Ramos Silva, Javier Noé|||0000-0002-7644-6215
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Pardo, Mari Carmen
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Ramirez-Garcia, Eloy|||0000-0002-2594-621X
  • Jiménez, David|||0000-0002-8148-198X
  • Marin, Enrique G.|||0000-0002-0302-3764
Exploiting ambipolar electrical conductivity based on graphene field-effect transistors has raised enormous interest for high-frequency (HF) analog electronics. Controlling the device polarity, by biasing the graphene transistor around the vertex of the V-shaped transfer curve, enables to redesign and highly simplify conventional analog circuits, and simultaneously to seek for multifunctionalities, especially in the HF domain. This study presents new insights for the design of different HF applications such as power amplifiers, mixers, frequency multipliers, phase shifters, and modulators that specifically leverage the inherent ambipolarity of graphene-based transistors.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Experimental Observation and Modeling of the Impact of Traps on Static and Analog/HF Performance of Graphene Transistors

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Wei, Wei
  • Pallecchi, Emiliano|||0000-0002-8682-7935
  • Happy, Henri|||0000-0003-2065-8080
  • Jiménez, David|||0000-0002-8148-198X
The trap-induced hysteresis on the performance of a graphene field-effect transistor is experimentally diminished here by applying consecutive gate-to-source voltage pulses of opposing polarity. This measurement scheme is a practical and suitable approach to obtain reproducible device characteristics. Trap-affected and trap-reduced experimental data enable a discussion regarding the impact of traps on static and dynamic device performance. An analytical drain current model calibrated with the experimental data enables the study of the trap effects on the channel potential within the device. High-frequency (HF) figures of merit and the intrinsic gain of the device obtained from both experimental and synthetic data with and without hysteresis show the importance of considering the generally overlooked impact of traps for analog and HF applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Unveiling the impact of the bias-dependent charge neutrality point on graphene based multi-transistor applications

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Rodriguez, Noel|||0000-0002-6032-6921
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Jiménez, David|||0000-0002-8148-198X
The Dirac voltage of a graphene field-effect transistor (GFET) stands for the gate bias that sets the charge neutrality condition in the channel, thus resulting in a minimum conductivity. Controlling its dependence on the terminal biases is crucial for the design and optimization of radio-frequency applications based on multiple GFETs. However, the previous analysis of such dependence carried out for single devices is uncomplete and if not properly understood could result in circuit designs with poor performance. The control of the Dirac point shift (DPS) is particularly important for the deployment of graphene-based differential circuit topologies where keeping a strict symmetry between the electrically balanced branches is essential for exploiting the advantages of such topologies. This note sheds light on the impact of terminal biases on the DPS in a real device and sets a rigorous methodology to control it so to eventually optimize and exploit the performance of radio-frequency applications based on GFETs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

An Extraction Method for Mobility Degradation and Contact Resistance of Graphene Transistors

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Jiménez, David|||0000-0002-8148-198X
The intrinsic mobility degradation coefficient, contact resistance, and the transconductance parameter of graphene field-effect transistors (GFETs) are extracted for different technologies by considering a novel transport model embracing mobility degradation effects within the charge channel control description. By considering the mobility degradation-based model, a straightforward extraction methodology, not provided before, is enabled by applying the concept of the well-known Y -function to the I - V device characteristics. The method works regardless of the gate device architecture. An accurate description of experimental data of fabricated devices is achieved with the underlying transport equation by using the extracted parameters. An evaluation of the channel resistance, enabled by the extracted parameters here, has also been provided.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Nanoporous graphene-based thin-film microelectrodes for in vivo high-resolution neural recording and stimulation

  • Viana, Damià
  • Rodríguez Lucas, Elisa
  • Gener, Thomas
  • Puig, Maria Victoria
  • Garrido, Jose A.
One of the critical factors determining the performance of neural interfaces is the electrode material used to establish electrical communication with the neural tissue, which needs to meet strict electrical, electrochemical, mechanical, biological and microfabrication compatibility requirements. This work presents a nanoporous graphene-based thin-film technology and its engineering to form flexible neural interfaces. The developed technology allows the fabrication of small microelectrodes (25 µm diameter) while achieving low impedance (∼25 kΩ) and high charge injection (3-5 mC cm-2). In vivo brain recording performance assessed in rodents reveals high-fidelity recordings (signal-to-noise ratio >10 dB for local field potentials), while stimulation performance assessed with an intrafascicular implant demonstrates low current thresholds (<100 µA) and high selectivity (>0.8) for activating subsets of axons within the rat sciatic nerve innervating tibialis anterior and plantar interosseous muscles. Furthermore, the tissue biocompatibility of the devices was validated by chronic epicortical (12 week) and intraneural (8 week) implantation. This work describes a graphene-based thin-film microelectrode technology and demonstrates its potential for high-precision and high-resolution neural interfacing., This work has been funded by the European Union Horizon 2020 Research and Innovation programme under grant agreement number 881603 (Graphene Core3); FLAG-ERA JTC 2021 project RESCUEGRAPH, from the Agencia Estatal de Investigación of Spain PCI2021-122075-2A y PCI2021-122095-2A financiados por MCIN/AEI/10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR; TERCEL (RD12/0019/0011), CIBERNED (CB06/05/1105) and CIBER-BBN (CB06/01/0049) funds from the Instituto de Salud Carlos III of Spain, Proyecto PID2020-113663RB-I00 financiado por MCIN/AEI/10.13039/501100011033, from the Generalitat de Catalunya (2021SGR00495) and from the European Union’s Horizon Europe research and innovation programme under grant agreement number 101070865 (MINIGRAPH). The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033, and by the CERCA Programme/Generalitat de Catalunya. D.V. and S.M.-S. have been supported by the International PhD Programme La Caixa–Severo Ochoa (Programa Internacional de Becas ‘la Caixa’–Severo Ochoa). D.V. acknowledges that this work has been done in the framework of a PhD in electrical and telecommunication engineering at the Universitat Autònoma de Barcelona. J.d.V. acknowledges the Ministerio de Economía, Industria y Competitividad of Spain for Juan de la Cierva incorporation fellowship. M.C.S. received funding from the European Union Horizon 2020 under the Marie Sklodowska-Curie grant agreement number 754510 (PROBIST). E.d.C. acknowledges Ayuda RYC2019-027879-I financiada por MCIN/AEI/10.13039/501100011033 y por El FSE invierte en tu futuro. N.R. acknowledges Ayuda PRE2020-093708 financiada por MCIN/AEI/10.13039/501100011033 y por FSE invierte en tu futuro. E.M.-C. acknowledges Ayuda FJC2021-046601-I financiada por MCIN/AEI/10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR. Authors acknowledge M. Ezcurdia for assistance in the bending experiments. S.M.-S and J.A. acknowledge funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. This work has made use of the Spanish ICTS Network MICRONANOFABS partially supported by MICINN and the ICTS ‘NANBIOSIS’, more specifically by the Micro-NanoTechnology Unit of the CIBER-BBN at the IMB-CNM. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD programme and Neuroscience PhD programme. The focused ion beam sample preparation was conducted in the Laboratorio de Microscopias Avanzadas at Instituto de Nanociencia de Aragon-Universidad de Zaragoza. Authors acknowledge the LMA-INA for offering access to their instruments and expertise. This study was also financed by grant PID2019-104683RB-I00 funded by MCIN/AEI/10.13039/501100011033 to M.V.P. The authors would like to acknowledge P. Nebot for technical assistance. The authors would also like to thank C. Bullock and C. Bussy for their contributions during the early stages of the project. The University of Manchester Bioimaging and Single Cell Genomics Facility microscopes used in this study were purchased with grants from the UKRI Biotechnology and Biological Sciences Research Council (BBSRC), the Wellcome Trust and the University of Manchester Strategic Fund. The RT97 antibody was obtained from the Developmental Studies Hybridoma Bank developed under the auspices of the NICHD and maintained by the University of Iowa, Department of Biology.
TECNALIA Publications
Publication Artículo científico (JournalArticle)

Three-dimensional reduced graphene oxide decorated with iron oxide nanoparticles as efficient active material for high performance capacitive deionization electrodes

  • Belaustegui, Yolanda
  • Rincón, Inés
  • Fernández-Carretero, Francisco
  • Azpiroz, Patxi
  • García-Luís, Alberto
  • Tanaka, David Alfredo Pacheco
A three-dimensional reduced graphene oxide decorated with iron oxide nanoparticles (3D rGO-Fe2O3) material with a suitable porous structure was synthesised using a one-step hydrothermal process in order to fabricate novel electrodes for capacitive deionization (CDI) water desalination. The morphological and structural properties of the as-synthesised compounds were characterised by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), Raman spectroscopy (RS), X-ray diffraction (XRD) and thermal gravimetric analysis (TGA). The CDI electrodes were electrochemically analysed by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). A maximum value of specific capacitance of 345 F g−1 was achieved at 5 mV s−1 scan rate using a NaCl 0.1 mol L−1 solution. The ion removal performance of the CDI electrodes was evaluated with NaCl solutions of different concentrations, showing electrosorption capacities as high as 945 mg g−1 for 11,700 mg L−1 (200 mmol L−1) NaCl solutions, which substantially surpasses results of other carbon-based CDI electrodes.
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Exploiting ambipolarity in graphene field-effect transistors for novel designs on high-frequency analog electronics

  • Pasadas Cantos, Francisco
  • Medina Rull, Alberto
  • García Ruiz, Francisco Javier
  • Ramos-Silva, Javier Noe
  • Pacheco-Sanchez, Anibal
  • Pardo, Mari-Carmen
  • Toral López, Alejandro
  • Godoy Medina, Andrés|||0000-0002-3014-8765
  • Ramírez-García, Eloy
  • Jiménez, David
  • González Marín, Enrique
This work was funded by FEDER/Junta de Andalucía-Consejería de Transformación Económica, Industria, Conocimiento y Universidades through the Projects A-TIC-646-UGR20, B-RNM-375-UGR18 and P20_00633; by Junta de Andalucía-Consejería de Universidad, Investigación e Innovación under ENERGHENE Project No. P21_00149; and by MCIN/AEI/10.13039/501100011033 through the projects PID2020- 116518GB-I00 and PID2021-127840NB-I00 (MCIN/AEI/FEDER, UE). The authors also acknowledge the support by the European Union’s Horizon 2020 Framework Programme for Research and Innovation through the Project GrapheneCore3 under Grant Agreement No. 881603. F.P. acknowledges funding from PAIDI 2020 – European Social Fund Operational Programme 2014–2020 No. 20804. A.M. acknowledges the support of the MCIN/AEI/PTA grant, with reference PTA2020-018250-I. M.C.P. acknowledges the FPU program with reference FPU21/04904. A.P.-S. acknowledges the support from Ministerio de Ciencia, Innovación y Universidades under Grant Agreement No. FJC2020-046213-I. E.R.-G. acknowledges the support from IPN Contract No. SIP/20230362. Funding for open access charge: Universidad de Granada / CBUA., Exploiting ambipolar electrical conductivity based on graphene field-effect transistors has raised enormous interest for high-frequency (HF) analog electronics. Controlling the device polarity, by biasing the graphene transistor around the vertex of the V-shaped transfer curve, enables to redesign and highly simplify conventional analog circuits, and simultaneously to seek for multifunctionalities, especially in the HF domain. This study presents new insights for the design of different HF applications such as power amplifiers, mixers, frequency multipliers, phase shifters, and modulators that specifically leverage the inherent ambipolarity of graphene-based transistors., FEDER/Junta de Andalucía-Consejería de Transformación Económica, Industria, Conocimiento y Universidades through the Projects A-TIC-646-UGR20, B-RNM-375-UGR18 and P20_00633, Junta de Andalucía-Consejería de Universidad, Investigación e Innovación under ENERGHENE Project No. P21_00149, MCIN/AEI/10.13039/501100011033 through the projects PID2020- 116518GB-I00 and PID2021-127840NB-I00 (MCIN/AEI/FEDER, UE), European Union’s Horizon 2020 Framework Programme for Research and Innovation through the Project GrapheneCore3 under Grant Agreement No. 881603, PAIDI 2020 – European Social Fund Operational Programme 2014–2020 No. 20804, MCIN/AEI/PTA grant, with reference PTA2020-018250-I, FPU21/04904, Ministerio de Ciencia, Innovación y Universidades under Grant Agreement No. FJC2020-046213-I, IPN Contract No. SIP/20230362, Funding for open access charge: Universidad de Granada / CBUA
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Two-dimensional tellurium-based diodes for RF applications

  • Askar, Abdelrahman M.
  • Pasadas Cantos, Francisco
The research of two-dimensional (2D) Tellurium (Te) or tellurene is thriving to address current challenges in emerging thin-film electronic and optoelectronic devices. However, the study of 2D-Te-based devices for high-frequency applications is still lacking in the literature. This work presents a comprehensive study of two types of radio frequency (RF) diodes based on 2D-Te flakes and exploits their distinct properties in two RF applications. First, a metal-insulator-semiconductor (MIS) structure is employed as a nonlinear device in a passive RF mixer, where the achieved conversion loss at 2.5 GHz and 5 GHz is as low as 24 dB and 29 dB, respectively. Then, a metal-semiconductor (MS) diode is tested as a zero-bias millimeter-wave power detector and reaches an outstanding linear-in-dB dynamic range over 40 dB, while having voltage responsivities as high as 257 V ⋅ W−1 at 1 GHz (up to 1 V detected output voltage) and 47 V ⋅ W−1 at 2.5 GHz (up to 0.26 V detected output voltage). These results show superior performance compared to other 2D material-based devices in a much more mature technological phase. Thus, the authors believe that this work demonstrates the potential of 2D-Te as a promising material for devices in emerging high-frequency electronics., MCIN/AEI/10.13039/501100011033, European Union NextGenerationEU/PRTR, German Research Foundation (DFG) under the projects GLECS2 (No. 653408), MOSTFLEX (653414),, The Natural Sciences and Engineering Research Council (NSERC) (RGPIN-2017-05810 and ALLRP 577611-22), The European Commission under the Horizon 2020 projects Graphene Flagship (No. 785219 and 881603), PAIDI 2020 and European Social Fund Operational Programme 2014-2020 no. 20804, Ministerio de Universidades, Grant no. CAS21/ 00483, Canada Foundation for Innovation (CFI), British Columbia Knowledge Development Fund (BCKDF), Western Economic Diversification Canada (WD), Simon Fraser University
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Interfacial Phenomena Governing Performance of Graphene Electrodes in Aqueous Electrolyte

  • Delgà-Fernández, Marta
  • Toral López, Alejandro
  • González Marín, Enrique
  • Godoy Medina, Andrés|||0000-0002-3014-8765
M.D.-F. acknowledges that this work has been done within the framework of the Ph.D. program in Materials Science of the Autonomous University of Barcelona. This work has received funding from the Spanish State Research Agency through PRE2018-086251 funded by MCIN/AEI/10.13039/501100011033 and FSE, UE, the PID2020-113663RB-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union’s Horizon 2020 research and innovation programs under Grant Agreement No. 881603 (Graphene Flagship Core Project 3). This work is supported by the Generalitat de Catalunya (2021-SGR-01534) and the Spanish Government through Project PID2020-116518GB-I00 funded by MCIN/AEI/10.13039/501100011033 and Project TED2021-129769B-I00 funded by MCIN/AEI/10.13039/501100011033 by the European Union NextGenerationEU/PRTR. Part of this work has made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MICINN and the ICTS NANBIOSIS, more specifically, by the MicroNanoTechnology Unit U8 of the CIBER-BBN. This project has also been funded by the Generalitat de Catalunya (2021SGR00495), by the Spanish Ministerio de Ciencia e Innovación (PID2021-126117NA-I00, PLEC2022-009232,), and by CIBER-BBN (CB06/01/0049). E.d.C. acknowledges the RYC2019-027879-I Grant funded by MCIN/AEI/10.13039/501100011033., There is evidence of the presence of intercalated water between graphene and the substrate in electronic devices. However, a proper understanding of the impact of this phenomenon, which causes important limitations for the optimization of graphene-based devices operating in aqueous electrolytes, is missing. We used graphene-based electrodes on insulating and conducting substrates to evaluate the impact of intercalated water by combining experimental techniques with numerical simulations. Results show that the capacitance of the conductive substrate/graphene electrodes is significantly higher than that of the insulating substrate/graphene ones. Meanwhile, Raman spectroscopy demonstrates that graphene charge modulation with the applied potential is independent of the substrate conductivity. We found that this intriguing behavior is influenced by the water intercalation phenomena and governed by the substrate conductive nature. This work contributes to the understanding of the electric response of graphene-based devices in an aqueous environment and of the methods to measure and model it., Autonomous University of Barcelona, MCIN/AEI/10.13039/501100011033 PRE2018-086251, PID2020-113663RB-I00, PID2020-116518GB-I00, TED2021-129769B-I00, RYC2019-027879-I, FSE, UE, European Union’s Horizon 2020 881603, European Union NextGenerationEU/PRTR, MICINN Spanish ICTS Network MICRONANOFABS, ICTS NANBIOSIS, MicroNanoTechnology Unit U8 CIBER-BBN, Generalitat de Catalunya (2021-SGR-01534), (2021SGR00495), Spanish Ministerio de Ciencia e Innovación (PID2021-126117NA-I00, PLEC2022-009232), CIBER-BBN (CB06/01/0049)
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

High-Data-Rate Modulators Based on Graphene Transistors: Device Circuit Co-Design Proposals

  • Pacheco-Sanchez, Anibal
  • Ramos-Silva, Javier Noe
  • Mavredakis, Nikolaos
  • Ramírez-García, Eloy
  • Jiménez, David
The multifunctionality feature of graphene field-effect transistors (GFETs) is exploited here to design circuit building blocks of high-data-rate modulators by using a physics-based compact model. Educated device performance projections are obtained with the experimentally calibrated model and used to choose an appropriate improved feasible GFET for these applications. Phase-shift and frequency-shift keying (PSK and FSK) modulation schemes are obtained with 0.6GHz GFET-based multifunctional circuits used alternatively in different operation modes: inverting and in-phase amplification and frequency multiplication. An adequate baseband signal applied to the transistors’ input also serves to enhance the device and circuit performance reproducibility since the impact of traps is diminished. Quadrature PSK is also achieved by combining two GFET-based multifunctional circuits. This device circuit co-design proposal intends to boost the heterogeneous implementation of graphene devices with incumbent technologies into a single chip: the baseband pulses can be generated with CMOS technology as a front end of line and the multifunctional GFET-based circuits as a back end of line., European Union’s Horizon 2020 research and innovation program under grant agreement no. GrapheneCore3 881603, Ministerio de Ciencia, Innovación y Universidades under grant agreements PID2021-127840NB-I00 (MCIN/AEI/FEDER, UE) and FJC2020-046213-I, Instituto Politécnico Nacional under the project number SIP/20240622
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Simulations of 2-D Materials-Based Field Effect Transistors for Quantum Cascade Detectors

  • Cannavó, Emmanuele
  • Marian, Damiano
  • González Marín, Enrique
  • Tredicucci, Alessandro
  • Fiori, Gianluca
We explore through numerical simulations the possibility of exploiting 2-D materials (2DMs)-based field effect transistors (FETs) as read-out devices for quantum cascade (QC) detectors. For this purpose, a deep investigation of the device parameter space has been performed while considering different 2DMs as channel material, such as graphene and transition metal dichalcogenides (TMDs), considering both short- and long-channel devices. We find that while graphene offers the highest current density for a given impinging power, it shows higher OFF-currents as compared to other solutions based on TMDs, which, eventually, can represent a better choice for this particular application., European Project ERC PEP2D under Contract 770047, European Union’s Horizon 2020 Research and Innovation Program under the grant agreements Graphene Flagship Core 3 under Contract 881603, National Center for HPC, Big Data and Quantum Computing (HPC) under Project CN00000013
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Compact Modeling Technology for the Simulation of Integrated Circuits Based on Graphene Field-Effect Transistors

  • Pasadas Cantos, Francisco
The progress made toward the definition of a modular compact modeling technology for graphene field-effect transistors (GFETs) that enables the electrical analysis of arbitrary GFET-based integrated circuits is reported. A set of primary models embracing the main physical principles defines the ideal GFET response under DC, transient (time domain), AC (frequency domain), and noise (frequency domain) analysis. Another set of secondary models accounts for the GFET non-idealities, such as extrinsic-, short-channel-, trapping/detrapping-, self-heating-, and non-quasi static-effects, which can have a significant impact under static and/or dynamic operation. At both device and circuit levels, significant consistency is demonstrated between the simulation output and experimental data for relevant operating conditions. Additionally, a perspective of the challenges during the scale up of the GFET modeling technology toward higher technology readiness levels while drawing a collaborative scenario among fabrication technology groups, modeling groups, and circuit designers, is provided., European Commission 881603, Spanish Government European Commission RTI2018-097876-B-C21 European Commission, Departament de Recerca i Universitat 001-P-001702
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

A Graphene Field-Effect Transistor Based Analogue Phase Shifter for High-Frequency Applications

  • Medina Rull, Alberto
  • Pasadas Cantos, Francisco
  • González Marín, Enrique
  • Toral López, Alejandro
  • Cuesta-Lopez, Juan
  • Godoy Medina, Andrés|||0000-0002-3014-8765
  • Jiménez, David
  • García Ruiz, Francisco Javier
We present a graphene-based phase shifter for radio-frequency (RF) phase-array applications. The core of the designed phase-shifting system consists of a graphene field-effect transistor (GFET) used in a common source amplifier configuration. The phase of the RF signal is controlled by exploiting the quantum capacitance of graphene and its dependence on the terminal transistor biases. In particular, by independently tuning the applied gate-to-source and drain-to-source biases, we observe that the phase of the signal, in the super-high frequency band, can be varied nearly 200° with a constant gain of 2.5 dB. Additionally, if only the gate bias is used as control signal, and the drain is biased linearly dependent on the former (i.e., in a completely analogue operation), a phase shift of 85° can be achieved making use of just one transistor and keeping a gain of 0 dB with a maximum variation of 1.3 dB. The latter design can be improved by applying a balanced branch-line configuration showing to be competitive against other state-of-the-art phase shifters. This work paves the way towards the exploitation of graphene technology to become the core of active analogue phase shifters for high-frequency operation., Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación (AEI), European Regional Developments Fund (ERDF/FEDER), under Project TEC2017-89955-P and Project EQC2018-004963-P (MINECO/AEI/FEDER), FEDER/Junta de Andalucía-Consejería de Economía y Conocimiento under Project B-RNM-375-UGR18, European Commission through the Horizon 2020 Project Wearable Applications Enabled by Electronic Systems on Paper (WASP) under Contract 825213, Juan de la Cierva Incorporación under Grant IJCI-2017-32297 (MINECO/AEI), European Union's Horizon 2020 Research and Innovation Programme under Grant GrapheneCore2 785219 and Grant GrapheneCore3 881603, Ministerio de Ciencia, Innovación y Universidades under Grant RTI2018-097876-B-C21(MCIU/AEI/FEDER, UE), European Regional Development Funds (ERDF) through the Programa Operatiu FEDER de Catalunya 2014-2020, with the support of the Secretaria d'Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya, GraphCAT under Project 001-P-001702
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Dielectric-Doped 2D Tellurium Diodes for Zero-Bias Radio Frequency Power Detection

  • Palacios, Paula
  • Askar, Abdelrahman M.
  • Pasadas Cantos, Francisco
  • Saeed, Mohamed
  • González Marín, Enrique
  • Adachi, Michael M.
  • Negra, Renato
This work presents a 2D tellurium (Te)-based diode that exploits the doping achieved by atomic layer deposited (ALD) Al2O3 to enhance its rectifying performance. The proposed device comprises a Schottky junction that is dielectric-doped to significantly reduce the reverse bias current. A boosted current responsivity four times higher compared to that of undoped devices is achieved, maximizing the performance for radio frequency (RF) power detectors. The application measurement results demonstrate sensitivities as low as −45 dBm, and at −30 dBm RF input power outstanding tangential responsivities up to 6.5 kV W–1, 4.3 kV W–1, and 650 V W–1 at 0.5, 1, and 2.5 GHz, respectively, while reaching linear dynamic range (DR) of over 30 dB. These are the highest reported values for 2D-based material devices by almost two orders of magnitude. Furthermore, the DR is ≈10 dB larger compared to state-of-the-art power detectors based on bulk semiconductors., German Research Foundation (DFG) under the projects GLECS2 (No. 653408), MOSTFLEX (653414), Natural Sciences and Engineering Research Council of Canada (NSERC) (RGPIN-2017-05810 and ALLRP 577611-22), European Commission under the Horizon 2020 projects Graphene Flagship (No. 785219 and 881603), Research projects TED2021-129938B-I00 FlexPowHar and CNS2023-143727 RECAMBIO both funded by MCIN/AEI/10.13039/501100-011033 and the European Union NextGenerationEU/PRTR, R+D+i project A-ING-253-UGR23 AMBITIONS co-financed by Consejería de Universidad, Investigación e Innovación and the European Union under the FEDER Andalucía 2021-2027, Vanier Canada Graduate Scholarship, Simon Fraser University
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Interactions of Graphene Oxide and Few-Layer Graphene with the Blood−Brain Barrier

  • Castagnola, Valentina
  • Bramini, Mattia|||0000-0002-0381-9391
We thank Dr. Michele Dipalo (Istituto Italiano di Tecnologia, Genova, Italy) for help with Raman measurements. We also thank Ilaria Dallorto, Rossana Ciancio, Diego Moruzzo, and Arta Mehilli for administrative and technical help. The project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement No. 881603 Graphene Flagship Core3 (to F.B.), the Italian Ministry of Foreign Affairs and International Cooperation (Grant Agreement No. MAE00694702021-05-20 to F.B.), and IRCCS Ospedale Policlinico San Martino, Genova, Italy (Ricerca Corrente and “5x1000” to F.B and V.C.)., Materials and methods and additional figures on materials characterization, in vitro experiments, imaging and mass spectrometry analysis. The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.nano- lett.3c00377. Materials and methods and additional figures on materials characterization, in vitro experiments, imaging and mass spectrometry analysis (PDF) https://pubs.acs.org/doi/suppl/10.1021/acs.nanolett.3c00377/suppl_file/nl3c00377_si_001.pdf Supplementary File P1: Full list of quantified proteins (XLSX) Supplementary File P2: Full sets of altered proteins (XLSX) Supplementary File P3: Full sets of altered proteins (XLSX), Thanks to their biocompatibility and high cargo capability, graphene-based materials (GRMs) might represent an ideal brain delivery system. The capability of GRMs to reach the brain has mainly been investigated in vivo and has highlighted some controversy. Herein, we employed two in vitro BBB models of increasing complexity to investigate the bionano interactions with graphene oxide (GO) and few-layer graphene (FLG): a 2D murine Transwell model, followed by a 3D human multicellular assembloid, to mimic the complexity of the in vivo architecture and intercellular crosstalk. We developed specific methodologies to assess the translocation of GO and FLG in a label-free fashion and a platform applicable to any nanomaterial. Overall, our results show good biocompatibility of the two GRMs, which did not impact the integrity and functionality of the barrier. Sufficiently dispersed subpopulations of GO and FLG were actively uptaken by endothelial cells; however, the translocation was identified as a rare event., European Union's Horizon 2020 Research and Innovation Programme 881603, Ministry of Foreign Affairs and International Cooperation (Italy) MAE00694702021-05-20, IRCCS Ospedale Policlinico San Martino, Genova, Italy
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Multi-scale analysis of radio-frequency performance of 2D-material based field-effect transistors

  • Toral López, Alejandro
  • González Marín, Enrique
  • Medina Rull, Alberto
  • García Ruiz, Francisco Javier
  • Godoy Medina, Andrés|||0000-0002-3014-8765
A. Toral-Lopez acknowledges the FPU program (FPU16/04043). E. G. Marin acknowledges Juan de la Cierva Incorporación IJCI-2017-32297 (MINECO/AEI). This work has received funding from the European Unions Horizon 2020 Research and Innovation Programme under grant agreements No. GrapheneCore2 785219 and No. GrapheneCore3 881603, and from Ministerio de Ciencia, Innovación y Universidades under grant agreement RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), TEC2017- 89955-P (MINECO/AEI/FEDER, UE), and TEC2015-67462-C2-1- R (MINECO). This article has been partially funded by the European Regional Development Funds (ERDF) allocated to the Programa Operatiu FEDER de Catalunya 2014–2020, with support of the Secretaria d’Universitats i Recerca of the Departament d’Empresa i Coneixement of the Generalitat de Catalunya for Emerging Technology Clusters to carry out valorization and transfer of research results. GraphCAT project 001-P-001702., Two-dimensional materials (2DMs) are a promising alternative to complement and upgrade high-frequency electronics. However, in order to boost their adoption, the availability of numerical tools and physically-based models able to support the experimental activities and to provide them with useful guidelines becomes essential. In this context, we propose a theoretical approach that combines numerical simulations and small-signal modeling to analyze 2DM-based FETs for radio-frequency applications. This multi-scale scheme takes into account non-idealities, such as interface traps, carrier velocity saturation, or short channel effects, by means of self-consistent physics-based numerical calculations that later feed the circuit level via a small-signal model based on the dynamic intrinsic capacitances of the device. At the circuit stage, the possibilities range from the evaluation of the performance of a single device to the design of complex circuits combining multiple transistors. In this work, we validate our scheme against experimental results and exemplify its use and capability assessing the impact of the channel scaling on the performance of MoS2-based FETs targeting RF applications., FPU program (FPU16/04043), Juan de la Cierva Incorporación IJCI-2017-32297 (MINECO/AEI), European Unions Horizon 2020 Research and Innovation Programme under grant agreements No. GrapheneCore2 785219 and No. GrapheneCore3 881603, Ministerio de Ciencia, Innovación y Universidades under grant agreement RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), TEC2017- 89955-P (MINECO/AEI/FEDER, UE), and TEC2015-67462-C2-1- R (MINECO), European Regional Development Funds (ERDF) allocated to the Programa Operatiu FEDER de Catalunya 2014–2020, with support of the Secretaria d’Universitats i Recerca of the Departament d’Empresa i Coneixement of the Generalitat de Catalunya for Emerging Technology Clusters, GraphCAT project 001-P-001702
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Strongly Coupled Magnon–Plasmon Polaritons in Graphene-Two-Dimensional Ferromagnet Heterostructures

  • Costa, António T.
  • Vasilevskiy, Mikhail I.
  • Fernández-Rossier, Joaquín
  • Peres, Nuno M.R.
  • Fernández-Rossier, Joaquín|||/items/5d31f6dc-0ceb-4dec-8e06-baa8d84acde4
Magnons and plasmons are different collective modes, involving the spin and charge degrees of freedom, respectively. Formation of hybrid plasmon–magnon polaritons in heterostructures of plasmonic and magnetic systems faces two challenges, the small interaction of the electromagnetic field of the plasmon with the spins, and the energy mismatch, as in most systems plasmons have energies orders of magnitude larger than those of magnons. We show that graphene plasmons form polaritons with the magnons of two-dimensional ferromagnetic insulators, placed up to to half a micrometer apart, with Rabi splittings in the range of 100 GHz (dramatically larger than cavity magnonics). This is facilitated both by the small energy of graphene plasmons and the cooperative super-radiant nature of the plasmon–magnon coupling afforded by phase matching. We show that the coupling can be modulated both electrically and mechanically, and we propose a ferromagnetic resonance experiment implemented with a two-dimensional ferromagnet driven by graphene plasmons.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Rhombohedral-stacked bilayer transition metal dichalcogenides for high-performance atomically thin CMOS devices

  • Li, Xuefei
  • Shi, Xinhang
  • Marian, Damiano
  • Soriano, David
  • Cusati, Teresa
  • Iannaccone, Giuseppe
  • Fiori, Gianluca
  • Guo, Qi
  • Zhao, Wenjie
  • Wu, Yanqing
  • Soriano, David|||/items/3feef815-ce01-447c-bdc2-e0ee70935b93
Van der Waals coupling with different stacking configurations is emerging as a powerful method to tune the optical and electronic properties of atomically thin two-dimensional materials. Here, we investigate 3R-stacked transition-metal dichalcogenides as a possible option for high-performance atomically thin field-effect transistors (FETs). We report that the effective mobility of 3R bilayer WS2 (WSe2) is 65% (50%) higher than that of 2H WS2 (WSe2). The 3R bilayer WS2 n-type FET exhibits a high on-state current of 480 μA/μm at Vds = 1 V and an ultralow on-state resistance of 1 kilohm·μm. Our observations, together with multiscale simulations, reveal that these improvements originate from the strong interlayer coupling in the 3R stacking, which is reflected in a higher conductance compared to the 2H stacking. Our method provides a general and scalable route toward advanced channel materials in future electronic devices for ultimate scaling, especially for complementary metal oxide semiconductor applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Observation of fractional edge excitations in nanographene spin chains

  • Mishra, Shantanu
  • Catarina, Gonçalo
  • Wu, Fupeng
  • Ortiz-Cano, Ricardo
  • Jacob, David
  • Eimre, Kristjan
  • Ma, Ji
  • Pignedoli, Carlo A.
  • Feng, Xinliang
  • Ruffieux, Pascal
  • Fernández-Rossier, Joaquín
  • Fasel, Roman
  • Fernández-Rossier, Joaquín|||/items/5d31f6dc-0ceb-4dec-8e06-baa8d84acde4
  • Jacob, David|||/items/fb966e10-dccc-4126-b35f-c44af4ba8ee1
Fractionalization is a phenomenon in which strong interactions in a quantum system drive the emergence of excitations with quantum numbers that are absent in the building blocks. Outstanding examples are excitations with charge e/3 in the fractional quantum Hall effect1,2, solitons in one-dimensional conducting polymers3,4 and Majorana states in topological superconductors5. Fractionalization is also predicted to manifest itself in low-dimensional quantum magnets, such as one-dimensional antiferromagnetic S = 1 chains. The fundamental features of this system are gapped excitations in the bulk6 and, remarkably, S = 1/2 edge states at the chain termini7,8,9, leading to a four-fold degenerate ground state that reflects the underlying symmetry-protected topological order10,11. Here, we use on-surface synthesis12 to fabricate one-dimensional spin chains that contain the S = 1 polycyclic aromatic hydrocarbon triangulene as the building block. Using scanning tunnelling microscopy and spectroscopy at 4.5 K, we probe length-dependent magnetic excitations at the atomic scale in both open-ended and cyclic spin chains, and directly observe gapped spin excitations and fractional edge states therein. Exact diagonalization calculations provide conclusive evidence that the spin chains are described by the S = 1 bilinear-biquadratic Hamiltonian in the Haldane symmetry-protected topological phase. Our results open a bottom-up approach to study strongly correlated phases in purely organic materials, with the potential for the realization of measurement-based quantum computation13.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

2D Van der Waals Heterostructures for Chemical Sensing

  • Hou, Huilei
  • Anichini, Cosimo
  • Samorì, Paolo
  • Criado, Alejandro
  • Prato, Maurizio
[Abstract] During the last 15 years, 2D materials have revolutionized the field of materials science. Moreover, because of their highest surface-to-volume ratio and properties extremely susceptible to their interaction with the local environment they became powerful active components for the development the high-performance chemical sensors. By combining different 2D materials to form van der Waals heterostructures (VDWHs) it is possible to overcome the drawback of individual materials (such as inertness and zero-bandgap of pristine graphene and less environmental stability of transition metal dichalcogenides). Meanwhile, VDWHs possess unprecedented and fascinating properties arising from the intimate interaction between the components, which can yield superior sensitivities, higher selectivity, and stability when employed to detect gases, biomolecules, and other organic/inorganic molecules. Herein, the latest developments and advances in the field of chemical sensors based on VDWH of 2D materials, with specific insight into the sensing mechanisms, are reviewed and future directions, challenges, and opportunities for the development of the next generation of (bio)chemical sensors with potential impact in environmental sciences and biomedical applications, and more specifically in (bio)chemical defense, industrial safety, food, and environmental surveillance, and medical (early) diagnostics, are discussed., The authors gratefully acknowledge the financial support from the University of Trieste, INSTM, the Italian Ministry of Education MIUR (Cofin Prot. 2017PBXPN4) and the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (Grant No. MDM-2017-0720). The authors acknowledge financial support from the EC through the Graphene Flagship Core 3 project (GA-881603) and the ERC project SUPRA2DMAT (GA-833707), the Interdisciplinary Thematic Institute SysChem via the IdEx Unistra (ANR-10-IDEX-0002) within the program Investissement d’Avenir program, the International Center for Frontier Research in Chemistry and the Institut Universitaire de France (IUF). M.P. is AXA Chair of Bionanotechnology. A.C. thanks MINECO and Xunta de Galicia for his research grants (Ramon y Cajal No. RYC2020-030183-I, and Atracción de Talento No. ED431H 2020/17, respectively). H.-L.H. thanks MINECO for his research grant (Juan de la Cierva Incorporacion/No. IJC-2018-037396-I). Open access funding provided by Universita degli Studi di Trieste within the CRUI-CARE Agreement., Xunta de Galicia; ED431H 2020/17
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Bidirectional Modulation of Neuronal Cells Electrical and Mechanical Properties Through Pristine and Functionalized Graphene Substrates

  • Zummo, Francesca
  • Esposito, Pietro
  • Hou, Huilei
  • Wetzl, Cecilia
  • Rius, Gemma
  • Tkatchenko, Raphaela
  • Guimerà, Anton
  • Godignon, Philippe
  • Prato, Maurizio
  • Prats Alfonso, Elisabet
  • Criado, Alejandro
  • Scaini, Denis
[Abstract] In recent years, the quest for surface modifications to promote neuronal cell interfacing and modulation has risen. This course is justified by the requirements of emerging technological and medical approaches attempting to effectively interact with central nervous system cells, as in the case of brain-machine interfaces or neuroprosthetic. In that regard, the remarkable cytocompatibility and ease of chemical functionalization characterizing surface-immobilized graphene-based nanomaterials (GBNs) make them increasingly appealing for these purposes. Here, we compared the (morpho)mechanical and functional adaptation of rat primary hippocampal neurons when interfaced with surfaces covered with pristine single-layer graphene (pSLG) and phenylacetic acid-functionalized single-layer graphene (fSLG). Our results confirmed the intrinsic ability of glass-supported single-layer graphene to boost neuronal activity highlighting, conversely, the downturn inducible by the surface insertion of phenylacetic acid moieties. fSLG-interfaced neurons showed a significant reduction in spontaneous postsynaptic currents (PSCs), coupled to reduced cell stiffness and altered focal adhesion organization compared to control samples. Overall, we have here demonstrated that graphene substrates, both pristine and functionalized, could be alternatively used to intrinsically promote or depress neuronal activity in primary hippocampal cultures., This work was funded by the European Union’s Horizon 2020 Research and Innovation Program under the Grant Agreements 785219 and 881603 of the Graphene Flagship. DS acknowledges the support of the European Union’s Horizon 2020 Research and Innovation Program under the Marie Skłodowska-Curie grant agreement no. 838902. MP as the recipient of the AXA Bionanotechnology Chair, is grateful to the AXA Research Fund for financial support. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency-grant no. MDM-2017- 0720. AC thanks Xunta de Galicia for his research grant Atracción de Talento (no. ED431H 2020/17). GR acknowledges funding from RYC-2016-21412. HH acknowledges funding from Juan de la Cierva – Incorporación no. IJC-2018-037396-I, Xunta de Galicia; ED431H 2020/17
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Covalent functionalisation controlled by molecular design for the aptameric recognition of serotonin in graphene-based field-effect transistors

  • Wetzl, Cecilia
  • Brosel, Sergi
  • Carini, Marco
  • Di Silvio, Desiré
  • Illa, Xavi
  • Villa, Rosa
  • Guimerà, Anton
  • Prats Alfonso, Elisabet
  • Prato, Maurizio
  • Criado, Alejandro
[Abastract]: In the last decade, solution-gated graphene field effect transistors (GFETs) showed their versatility in the development of a miniaturized multiplexed platform for electrophysiological recordings and sensing. Due to their working mechanism, the surface functionalisation and immobilisation of receptors are pivotal to ensure the proper functioning of devices. Herein, we present a controlled covalent functionalisation strategy based on molecular design and electrochemical triggering, which provide a monolayer-like functionalisation of micro-GFET arrays retaining the electronic properties of graphenes. The functionalisation layer as a receptor was then employed as the linker for serotonin aptamer conjugation. The micro-GFET arrays display sensitivity toward the target analyte in the micromolar range in a physiological buffer (PBS 10 mM). The sensor allows the in-flow real-time monitoring of serotonin transient concentrations with fast and reversible responses., This work has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 881603 (GrapheneCore3) and no. 785219 (GrapheneCore2). M. P. is AXA Professor and is supported by the European Research Council (ERC-AdG-2019, no. 885323), the Agencia Estatal de Investigación-AEI (“Proyectos I+D+i 2019-Modalidad Retos Investigación”, no. PID2019-108523RB-I00), by grant PRE2020-095099 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future.” Part of this work has made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MICINN and the ICTS NANBIOSIS, more specifically by the Micro-NanoTechnology Unit U8 of the CIBER-BBN. This project was also funded by the Generalitat de Catalunya (2021SGR00495), by the Spanish Ministerio de Ciencia e Innovación (PID2021-126117NA-I00), by “ERDF A way of making Europe”, and by CIBER-BBN (CB06/01/0049). X. I., R. V., A. G. and E. P.-A. thank the financial support provided by CIBER-BBN and the Instituto de Salud Carlos III with assistance from the European Regional Development. A. C. acknowledges financial support by Grant ED431H 2020/17 funded by Xunta de Galicia, and by Grant RYC2020-030183-I funded by MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future”., Generalitat de Catalunya; 2021SGR00495, Xunta de Galicia; ED431H 2020/17
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Electrochemically Controlled Cleavage of Imine Bonds on a Graphene Platform: Towards New Electro-Responsive Hybrids for Drug Release

  • Hou, Huilei
  • Cardo, Lucia
  • Mancino, Donato
  • Arnaiz, Blanca
  • Criado, Alejandro
  • Prato, Maurizio
[Abstract] Graphene-based materials are particularly suitable platforms for the development of new systems able to release drugs upon the application of controlled electrochemical stimuli. Herein, we report a new electro-responsive graphene carrier functionalised with aldehydes (as drug models) through imine-based linkers. We explore a new type of drug loading/release combination based on the formation of a covalent bond and its cleavage upon electrolysis. The new graphene–drug model hybrid is stable under physiological conditions and displays a fast drug release upon the application of low voltages., M. Prato is the recipient of the AXA Chair (2016–2023). A. Criado, H.-L. Hou and D. Mancino thank MINECO for their research grants (Juan de la Cierva – Incorporación No. IJCI-2016-31113 and IJC-2018-037396 for A. Criado and H.-L. Hou, respectively; and FPI No. BES-2017-081563 for D. Mancino). This work was supported by the Graphene Flagship Core 2 and Core 3 grant agreement (No. 785219 and 881603, respectively) and EU H2020-MSCA-RISE-2016 (No. 734381). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency – Grant No. MDM-2017-0720.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Single-Step Functionalization Strategy of Graphene Microtransistor Array with Chemically Modified Aptamers for Biosensing Applications

  • Brosel, Sergi
  • Rius, Gemma
  • Aviñó, Ana
  • Nako, Nakatsuka
  • Illa, Xavi
  • Corro, Elena del
  • Delgà-Fernández, Marta
  • Criado, Alejandro
  • Guimerà, Anton
  • Prats Alfonso, Elisabet
[Abstract]: Graphene solution-gated field-effect transistors (gSGFETs) offer high potential for chemical and biochemical sensing applications. Among the current trends to improve this technology, the functionalization processes are gaining relevance for its crucial impact on biosensing performance. Previous efforts are focused on simplifying the attachment procedure from standard multi-step to single-step strategies, but they still suffer from overreaction, and impurity issues and are limited to a particular ligand. Herein, a novel strategy for single-step immobilization of chemically modified aptamers with fluorenylmethyl and acridine moieties, based on a straightforward synthetic route to overcome the aforementioned limitations is presented. This approach is benchmarked versus a standard multi-step strategy using thrombin as detection model. In order to assess the reliability of the functionalization strategies 48-gSGFETs arrays are employed to acquire large datasets with multiple replicas. Graphene surface characterization demonstrates robust and higher efficiency in the chemical coupling of the aptamers with the single-step strategy, while the electrical response evaluation validates the sensing capability, allowing to implement different alternatives for data analysis and reduce the sensing variability. In this work, a new tool capable of overcome the functionalization challenges of graphene surfaces is provided, paving the way toward the standardization of gSGFETs for biosensing purposes., This work has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 881603 (GrapheneCore3) and no. 785219 (GrapheneCore2). M. P. is AXA Professor and is supported by the European Research Council (ERC-AdG-2019, no. 885323), the Agencia Estatal de Investigación-AEI (“Proyectos I+D+i 2019-Modalidad Retos Investigación”, no. PID2019-108523RB-I00), by grant PRE2020-095099 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future.” Part of this work has made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MICINN and the ICTS NANBIOSIS, more specifically by the Micro-NanoTechnology Unit U8 of the CIBER-BBN. This project was also funded by the Generalitat de Catalunya (2021SGR00495), by the Spanish Ministerio de Ciencia e Innovación (PID2021-126117NA-I00), by “ERDF A way of making Europe”, and by CIBER-BBN (CB06/01/0049). X. I., R. V., A. G. and E. P.-A. thank the financial support provided by CIBER-BBN and the Instituto de Salud Carlos III with assistance from the European Regional Development. A. C. acknowledges financial support by Grant ED431H 2020/17 funded by Xunta de Galicia, and by Grant RYC2020-030183-I funded by MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future”., Generalitat de Catalunya; 2021SGR00495
Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Phonon-enhanced mid-infrared CO2 gas sensing using boron nitride nanoresonators

  • Bareza, Nestor Jr.
  • Paulillo, Bruno
  • Slipchenko, Tetiana M.
  • Autore, Marta
  • Dolado, Irene
  • Liu, Song
  • Edgar, James H.
  • Vélez Centoral, Saul
  • Martín Moreno, Luis
  • Hillenbrand, Rainer
  • Pruneri, Valerio
Hexagonal boron nitride (hBN) hosts long-lived phonon polaritons, yielding a strong mid-infrared (mid-IR) electric field enhancement and concentration on the nanometer scale. It is thus a promising material for highly sensitive mid-IR sensing and spectroscopy. In addition, hBN possesses high chemical and thermal stability as well as mechanical durability, making it suitable for operation in demanding environments. In this work, we demonstrate a mid-IR CO2 gas sensor exploiting phonon polariton (PhP) modes in hBN nanoresonators functionalized by a thin CO2-adsorbing polyethylenimine (PEI) layer. We find that the PhP resonance shifts to lower frequency, weakens, and broadens for increasing CO2 concentrations, which are related to the change of the permittivity of PEI upon CO2 adsorption. Moreover, the PhP resonance exhibits a high signal-to-noise ratio even for small ribbon arrays of 30 × 30 μm2. Our results show the potential of hBN nanoresonators to become a novel platform for miniaturized phonon-enhanced SEIRA gas sensors
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

A Stable High-Capacity Lithium-Ion Battery Using a Biomass-Derived Sulfur-Carbon Cathode and Lithiated Silicon Anode

  • Marangon, Vittorio
  • Hernández-Rentero, C.
  • Olivares-Marín, Mara
  • Gómez-Serrano, Vicente
  • Caballero, Álvaro
  • Morales, Julián
  • Hassoun, Jusef
A full lithium-ion-sulfur cell with a remarkable cycle life was achieved by combining an environmentally sustainable biomass-derived sulfur-carbon cathode and a pre-lithiated silicon oxide anode. X-ray diffraction, Raman spectroscopy, energy dispersive spectroscopy, and thermogravimetry of the cathode evidenced the disordered nature of the carbon matrix in which sulfur was uniformly distributed with a weight content as high as 75 %, while scanning and transmission electron microscopy revealed the micrometric morphology of the composite. The sulfur-carbon electrode in the lithium half-cell exhibited a maximum capacity higher than 1200 mAh gS−1, reversible electrochemical process, limited electrode/electrolyte interphase resistance, and a rate capability up to C/2. The material showed a capacity decay of about 40 % with respect to the steady-state value over 100 cycles, likely due to the reaction with the lithium metal of dissolved polysulfides or impurities including P detected in the carbon precursor. Therefore, the replacement of the lithium metal with a less challenging anode was suggested, and the sulfur-carbon composite was subsequently investigated in the full lithium-ion-sulfur battery employing a Li-alloying silicon oxide anode. The full-cell revealed an initial capacity as high as 1200 mAh gS−1, a retention increased to more than 79 % for 100 galvanostatic cycles, and 56 % over 500 cycles. The data reported herein well indicated the reliability of energy storage devices with extended cycle life employing high-energy, green, and safe electrode materials.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Diffusional Features of a Lithium-Sulfur Battery Exploiting Highly Microporous Activated Carbon

  • Luna Lama, Fernando
  • Marangon, Vittorio
  • Caballero, Álvaro
  • Morales, Julián
  • Hassoun, Jusef
Diffusion processes at the electrode/electrolyte interphase drives the performance of lithium-sulfur batteries, and activated carbon (AC) can remarkably vehicle ions and polysulfide species throughout the two-side liquid/solid region of the interphase. We reveal original findings such as the values of the diffusion coefficient at various states of charge of a Li−S battery using a highly porous AC, its notable dependence on the adopted techniques, and the correlation of the diffusion trend with the reaction mechanism. X-ray photoelectron spectroscopy (XPS) and X-ray energy dispersive spectroscopy (EDS) are used to identify in the carbon derived from bioresidues heteroatoms such as N, S, O and P, which can increase the polarity of the C framework. The transport properties are measured by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic intermittent titration technique (GITT). The study reveals Li+-diffusion coefficient (DLi+) depending on the technique, and values correlated with the cell state of charge. EIS, CV, and GITT yield a DLi+ within 10−7–10−8 cm2 s−1, 10−8–10−9 cm2 s−1, and 10−6–10−12 cm2 s−1, respectively, dropping down at the fully discharged state and increasing upon charge. GITT allows the evaluation of DLi+ during the process and evidences the formation of low-conducting media upon discharge. The sulfur composite delivers in a Li-cell a specific capacity ranging from 1300 mAh g−1 at 0.1 C to 700 mAh g−1 at 2C with a S loading of 2 mg cm−2, and from 1000 to 800 mAh g−1 at 0.2C when the S loading is raised to 6 mg cm−2.
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Van der Waals interaction affects wrinkle formation in two-dimensional materials

  • Ares P.
  • Wang Y.B.
  • Woods C.R.
  • Dougherty J.
  • Fumagalli L.
  • Guinea, Francisco
  • Davidovitch B.
  • Novoselov K.S.
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Band-like Charge Transport in Phytic Acid-Doped Polyaniline Thin Films

  • Ballabio M.
  • Zhang T.
  • Chen C.
  • Zhang P.
  • Liao Z.
  • Hambsch M.
  • Mannsfeld S.C.B.
  • Zschech E.
  • Sirringhaus H.
  • Feng X.
  • Bonn M.
  • Dong R.
  • Cánovas, Enrique
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Double single-channel kondo coupling in graphene with fe molecules

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Switchless multiplexing of graphene active sensor arrays for brain mapping

  • Garcia Cortadella, Ramon
  • Schäfer, Nathan
  • Cisneros-Fernández, J.
  • Ré, Lucía
  • Illa, Xavi
  • Schwesig, Gerrit
  • Moya, Ana
  • Santiago, Sara
  • Guirado, Gonzalo
  • Villa, Rosa
  • Sirota, Anton
  • Serra-Graells, Francesc
  • Garrido, Jose A.
  • Guimerà-Brunet, Anton
Sensor arrays used to detect electrophysiological signals from the brain are paramount in neuroscience. However, the number of sensors that can be interfaced with macroscopic data acquisition systems currently limits their bandwidth. This bottleneck originates in the fact that, typically, sensors are addressed individually, requiring a connection for each of them. Herein, we present the concept of frequency-division multiplexing (FDM) of neural signals by graphene sensors. We demonstrate the high performance of graphene transistors as mixers to perform amplitude modulation (AM) of neural signals in situ, which is used to transmit multiple signals through a shared metal line. This technology eliminates the need for switches, remarkably simplifying the technical complexity of state-of-the-art multiplexed neural probes. Besides, the scalability of FDM graphene neural probes has been thoroughly evaluated and their sensitivity demonstrated in vivo. Using this technology, we envision a new generation of high-count conformal neural probes for high bandwidth brain machine interfaces., This work has been funded by the European Union’s Horizon 2020 research and innovation programme under Grant Agreement 732032 (BrainCom), Grant Agreement 85219 and 881603 (Graphene Flagship). The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, Grant SEV-2017-0706), and by the CERCA Programme/Generalitat de Catalunya. R.G.C. and N.S. acknowledge that this work has been done in the framework of the Ph.D. in Electrical and Telecommunication Engineering at the Universitat Autonoma de Barcelona. R.G.C is supported by the International Ph.D. Programme La Caixa - Severo Ochoa (Programa Internacional de Becas “la Caixa”-Severo Ochoa). This work has made use of the Spanish ICTS Network MICRONANOFABS partially supported by MICINN and the ICTS “NANBIOSIS”, more specifically by the Micro-NanoTechnology Unit of the CIBER in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN) at the IMB-CNM. This work is within the project 2DTecBio (FIS2017-85787-R) funded by the “Ministerio de Ciencia, Innovacion y Universidades” of Spain, the “Agencia Estatal de Investigacion (AEI)”, and the “Fondo Europeo de Desarrollo Regional (FEDER/UE)” and has received funding from Generalitat de Cataluña 2017 SGR 1426., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laser-deposited carbon aerogel derived from graphene oxide enables NO2-selective parts-per-billion sensing

  • Nufer, Sebastian
  • Lynch, Peter J.
  • Large, Matthew J.
  • Ogilvie, Sean P.
  • Salvage, Jonathan P.
  • Peláez-Fernández, Mario
  • Waters, Thomas
  • Jurewicz, Izabela
  • Muñoz, Edgar
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Tagmatarchis, Nikos
  • Ewels, Christopher P.
  • Brunton, Adam
  • Dalton, Alan B.
4 figures., Laser-deposited carbon aerogel is a low-density porous network of carbon clusters synthesized using a laser process. A one-step synthesis, involving deposition and annealing, results in the formation of a thin porous conductive film which can be applied as a chemiresistor. This material is sensitive to NO2 compared to ammonia and other volatile organic compounds and is able to detect ultra-low concentrations down to at least 10 parts-per-billion. The sensing mechanism, based on the solubility of NO2 in the water layer adsorbed on the aerogel, increases the usability of the sensor in practically relevant ambient environments. A heating step, achieved in tandem with a microheater, allows the recovery to the baseline, making it operable in real world environments. This, in combination with its low cost and scalable production, makes it promising for Internet-of-Things air quality monitoring., This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 642742. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through Project Grant MAT2016-79776-P (AEI/FEDER, UE) and from the European Union H2020 programs “ESTEEM3” (823717), Flagship Graphene (881603), FLAG-ERA - Graphene (MICINN) GATES (PCI2018-093137). WKM and ABM further acknowledge the Gobierno de Aragon (Grupos Reconocidos DGA T03_17R (FEDER, UE) and T03_20R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene transistors for real-time monitoring molecular self-assembly dynamics

  • Gobbi, Marco
  • Galanti, Agostino
  • Stoeckel, Marc-Antoine
  • Zyska, Björn
  • Bonacchi, Sara
  • Hecht, Stefan
  • Samorì, Paolo
Mastering the dynamics of molecular assembly on surfaces enables the engineering of predictable structural motifs to bestow programmable properties upon target substrates. Yet, monitoring self-assembly in real time on technologically relevant interfaces between a substrate and a solution is challenging, due to experimental complexity of disentangling interfacial from bulk phenomena. Here, we show that graphene devices can be used as highly sensitive detectors to read out the dynamics of molecular self-assembly at the solid/liquid interface in-situ. Irradiation of a photochromic molecule is used to trigger the formation of a metastable self-assembled adlayer on graphene and the dynamics of this process are monitored by tracking the current in the device over time. In perspective, the electrical readout in graphene devices is a diagnostic and highly sensitive means to resolve molecular ensemble dynamics occurring down to the nanosecond time scale, thereby providing a practical and powerful tool to investigate molecular self-organization in 2D., We acknowledge funding from the European Commission through the ERC projects SUPRA2DMAT (GA-833707) and Light4Function (GA-308117), the Graphene Flagship Core 3 project (GA-881603), the Marie Sklodowska-Curie projects ITN project ULTIMATE (GA-813036), the M-ERA.NET project MODIGLIANI, the Agence Nationale de la Recherche through the Labex projects CSC (ANR-10-LABX-0026 CSC) and NIE (ANR-11-LABX-0058 NIE) within the Investissement d’Avenir program (ANR-10-120 IDEX-0002-02), the International Center for Frontier Research in Chemistry (icFRC), the German Research Foundation (DFG via SFB 658 and SFB 951, project no. 182087777) and the Spanish MICINN under Project PID2019-108153GA-I00. The project leading to these results has received funding from “la Caixa” Foundation (ID 100010434). The Fellowship code is LCF/BQ/PI19/11690017., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Theory of the thickness dependence of the charge density wave transition in 1 T-TiTe2

  • Zhou, Jianqiang Sky
  • Bianco, Raffaello
  • Monacelli, Lorenzo
  • Errea, Ion
  • Mauri, Francesco
  • Calandra, Matteo
Most metallic transition metal dichalcogenides undergo charge density wave (CDW) instabilities with similar or identical ordering vectors in bulk and in single layer, albeit with different critical temperatures. Metallic 1 T-TiTe2 is a remarkable exception as it shows no evidence of charge density wave formation in bulk, but it displays a stable 2 × 2 reconstruction in single-layer form. The mechanism for this 3D-2D crossover of the transition is still unclear, although strain from the substrate and the exchange interaction have been pointed out as possible formation mechanisms. Here, by performing non-perturbative anharmonic calculations with gradient corrected and hybrid functionals, we explain the thickness behaviour of the transition in 1 T-TiTe. We demonstrate that the CDW in single-layer TiTe2 occurs from the interplay of non-perturbative anharmonicity and an exchange enhancement of the electron-phonon interaction, larger in the single layer than in the bulk. Finally, we study the electronic and structural properties of the single-layer CDW phase and provide a complete description of its electronic structure, phonon dispersion as well as infrared and Raman active phonon modes., Computational resources were granted by PRACE (Project No. 2017174186) and from IDRIS, CINES and TGCC (Grant eDARI 91202 and Grand Challenge Jean Zay). M C, F M, J S Z and L M acknowledge support from the European Union’s Horizon 2020 research and innovation programme Graphene Flagship under grant agreement No 881603.. M C and J S Z acknowledge support from Agence nationale de la recherche (Grant No. ANR-19-CE24-0028). F M and L M acknowledge support by the MIUR PRIN-2017 program, project number 2017Z8TS5B., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Emergence of intraparticle entanglement and time-varying violation of Bell's inequality in Dirac matter

  • Gabrielly de Moraes, Bruna
  • Cummings, Aron W.
  • Roche, Stephan
We demonstrate the emergence and dynamics of intraparticle entanglement in massless Dirac fermions. This entanglement, generated by spin-orbit coupling, arises between the spin and sublattice pseudospin of electrons in graphene. The entanglement is a complex dynamic quantity but is generally large, independent of the initial state. Its time dependence implies a dynamical violation of a Bell inequality, while its magnitude indicates that large intraparticle entanglement is a general feature of graphene on a substrate. These features are also expected to impact entanglement between pairs of particles, and may be detectable in experiments that combine Cooper pair splitting with nonlocal measurements of spin-spin correlation in mesoscopic devices based on Dirac materials., ICN2 is funded by the CERCA Programme/Generalitat de Catalunya, and is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). The authors acknowledge the European Union’s Horizon 2020 research and innovation programme under Grants Agreement No. 785219 and No. 881603 (Graphene Flagship). B.G. deM. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 754558 (PREBIST)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring event horizons and Hawking radiation through deformed graphene membranes

  • Morresi, Tommaso
  • Binosi, Daniele
  • Simonucci, Stefano
  • Piergallini, Riccardo
  • Roche, Stephan
  • Pugno, Nicola
  • Simone, Taioli
Analogue gravitational systems are becoming an increasing popular way of studying the behaviour of quantum systems in curved spacetime. Setups based on ultracold quantum gases in particular, have been recently harnessed to explore the thermal nature of Hawking's and Unruh's radiation that was theoretically predicted almost 50 years ago. For solid state implementations, a promising system is graphene, in which a link between the Dirac-like low-energy electronic excitations and relativistic quantum field theories has been unveiled soon after its discovery. This link could be extended to the case of curved quantum field theory when the graphene sheet is shaped in a surface of constant negative curvature, known as Beltrami's pseudosphere. Here we provide numerical evidence that energetically stable negative curvature graphene surfaces can be realized. Owing to large-scale simulations, our geometrical realizations are characterized by a ratio between the carbon–carbon bond length and the pseudosphere radius small enough to allow the formation of an analog of a black hole event horizon. Additionally, from the energy dependence of the spatially resolved density of states, we infer some thermal properties of the corresponding gravitational system, which could be investigated using low temperature scanning tunnelling microscopy or optical near field spectroscopy. These findings pave the way to the realization of a solid-state system in which the curved spacetime dynamics of quantum many body systems can be investigated., ICN2 is funded by the CERCA Programme/Generalitat de Catalunya, and is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). S R acknowledges the European Union’s Horizon 2020 research and innovation programme under grant agreement Nos. 785219 and 881603 (Graphene Flagship). N M P is supported by the European Commission under the Graphene Flagship Core 3 grant No. 881603 (WP14, ‘Composites’). The authors acknowledge Bruno Kessler Foundation (FBK) for providing unlimited access to the KORE computing facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fast electrical modulation of strong near-field interactions between erbium emitters and graphene

  • Cano, Daniel
  • Ferrier, Alban
  • Soundarapandian, Karuppasamy
  • Reserbat-Plantey, Antoine
  • Scarafagio, Marion
  • Tallaire, Alexandre
  • Seyeux, Antoine
  • Marcus, Philippe
  • Riedmatten, Hugues de
  • Goldner, Philippe
  • Koppens, Frank H. L.
  • Tielrooij, Klaas-Jan
Combining the quantum optical properties of single-photon emitters with the strong near-field interactions available in nanophotonic and plasmonic systems is a powerful way of creating quantum manipulation and metrological functionalities. The ability to actively and dynamically modulate emitter-environment interactions is of particular interest in this regard. While thermal, mechanical and optical modulation have been demonstrated, electrical modulation has remained an outstanding challenge. Here we realize fast, all-electrical modulation of the near-field interactions between a nanolayer of erbium emitters and graphene, by in-situ tuning the Fermi energy of graphene. We demonstrate strong interactions with a >1000-fold increased decay rate for ~25% of the emitters, and electrically modulate these interactions with frequencies up to 300 kHz – orders of magnitude faster than the emitter’s radiative decay (~100 Hz). This constitutes an enabling platform for integrated quantum technologies, opening routes to quantum entanglement generation by collective plasmon emission or photon emission with controlled waveform., K.-J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 804349. ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 712721 (NanOQTech). F.H.L.K. acknowledges financial support from the Government of Catalonia trough the SGR grant, and from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522), and Explora Ciencia FIS2017-91599-EXP. F.H.L.K. also acknowledges support by Fundacio Cellex Barcelona, Generalitat de Catalunya through the CERCA program, and the Mineco grants Plan Nacional (FIS2016-81044-P) and the Agency for Management of University and Research Grants (AGAUR) 2017 SGR 1656. Furthermore, the research leading to these results has received funding from the European Union’s Horizon 2020 under Grant Agreements No. 785219 (Core2) and No. 881603 (Core3) Graphene Flagship, and No. 820378 (Quantum Flagship). This work was supported by the ERC TOPONANOP under Grant Agreement No. 726001., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Plasmonic antenna coupling to hyperbolic phonon-polaritons for sensitive and fast mid-infrared photodetection with graphene

  • Castilla, Sebastián
  • Vangelidis, Ioannis
  • Pusapati, Varun-Varma
  • Goldstein, Jordan
  • Autore, Marta
  • Slipchenko, Tetiana
  • Rajendran, Khannan
  • Kim, Seyoon
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Martín-Moreno, Luis
  • Englund, Dirk
  • Tielrooij, Klaas-Jan
  • Hillenbrand, Rainer
  • Lidorikis, Elefterios
  • Koppens, Frank H. L.
Integrating and manipulating the nano-optoelectronic properties of Van der Waals heterostructures can enable unprecedented platforms for photodetection and sensing. The main challenge of infrared photodetectors is to funnel the light into a small nanoscale active area and efficiently convert it into an electrical signal. Here, we overcome all of those challenges in one device, by efficient coupling of a plasmonic antenna to hyperbolic phonon-polaritons in hexagonal-BN to highly concentrate mid-infrared light into a graphene pn-junction. We balance the interplay of the absorption, electrical and thermal conductivity of graphene via the device geometry. This approach yields remarkable device performance featuring room temperature high sensitivity (NEP of 82 pW/Hz−−−√) and fast rise time of 17 nanoseconds (setup-limited), among others, hence achieving a combination currently not present in the state-of-the-art graphene and commercial mid-infrared detectors. We also develop a multiphysics model that shows very good quantitative agreement with our experimental results and reveals the different contributions to our photoresponse, thus paving the way for further improvement of these types of photodetectors even beyond mid-infrared range., F.H.L.K. acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R& D (SEV-2015-0522), support by Fundacio Cellex Barcelona, Generalitat de Catalunya through the CERCA program, and the Agency for Management of University and Research Grants (AGAUR) 2017 SGR 1656. Furthermore, the research leading to these results has received funding from the European Union Seventh Framework Programme under grant agreement no. 785219 and no. 881603 Graphene Flagship for Core2 and Core3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). K.J.T. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 804349. R.H. acknowledges financial support from the Spanish Ministry of Science, Innovation and Universities (national project RTI2018-094830-B-100 and the project MDM-2016-0618 of the Marie de Maeztu Units of Excellence Program) and the Basque Government (grant No. IT1164-19). S.C. acknowledges financial support from the Barcelona Institute of Science and Technology (BIST), the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and the European Social Fund (L’FSE inverteix en el teu futur)—FEDER. D.E. acknowledges partial support from the Army Research Office MURI “Ab-Initio Solid-State Quantum Materials” Grant No. W911NF18-1-0431. J.G. was supported by the ARL-MIT Institute for Soldier Nanotechnologies (ISN). T.S. and L.M.M. acknowledge support by Spain’s MINECO under Grant No. MAT2017-88358-C3-1-R and the Aragon Government through project Q-MAD., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Recent advancement in biomedical applications on the surface of two-dimensional materials: from biosensing to tissue engineering

  • Nguyen, Emily P.
  • Castro Silva, Cecilia de Carvalho
  • Merkoçi, Arben
As biosensors and biomedical devices have become increasingly important to everyday diagnostics and monitoring, there are tremendous, and constant efforts towards developing and improving the reliability and versatility of such technology. As they offer high surface area-to-volume ratios and a diverse range of properties, from electronic to optical, two dimensional (2D) materials have proven to be very promising candidates for biological applications and technologies. Due to the dimensionality, 2D materials facilitate many interfacial phenomena that have shown to significantly improve the performance of biosensors, while recent advances in synthesis techniques and surface engineering methods also enable the realization of future biomedical devices. This short review aims to highlight the influence of 2D material surfaces and the properties that arise due to their 2D structure. Using recent (within the last few years) examples of biosensors and biomedical applications, we emphasize the important role of 2D materials in advancing developments and research for biosensing and healthcare., We acknowledge the financial support from the EU Graphene Flagship Core 3 Project (No. 881603), from the Spanish MINECO under project MAT2017-87202-P. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2013-0295) and by the CERCA Programme/Generalitat de Catalunya. E. P. N. acknowledges funding through the EU's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 754510. C. C. C. S acknowledges funding through CAPES – PRINT (Programa Institucional de Internacionalização; grant # 88887.310281/2018-00 and 88887.467442/2019-00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultralow-dielectric-constant amorphous boron nitride

  • Hong, Seokmo
  • Lee, Chang-Seok
  • Lee, Min-Hyun
  • Lee, Yeongdong
  • Ma, Kyung Yeol
  • Kim, Gwangwoo
  • Yoon, Seong In
  • Ihm, Kyuwook
  • Kim, Ki-Jeong
  • Shin, Tae Joo
  • Kim, Sang Won
  • Jeon, Eun-chae
  • Jeon, Hansol
  • Kim, Ju-Young
  • Lee, Hyung-Ik
  • Lee, Zonghoon
  • Antidormi, Aleandro
  • Roche, Stephan
  • Chhowalla, Manish
  • Shin, Hyeon-Jin
  • Shin, Hyeon Suk
We thank UNIST Central Research Facilities (UCRF) and Y. K. Kim for the cross-sectional high-resolution TEM images. This work was supported by Samsung Electronics (Samsung-SKKU Graphene/2D Center), the research fund (NRF-2017R1E1A1A01074493 and NRF-2019R1A4A1027934), the IBS (IBS-R-019-D1) and a grant (CASE-2013M3A6A5073173) from the Centre for Advanced Soft Electronics under the Global Frontier Research Program via the National Research Foundation of the Ministry of Science and ICT, South Korea. The NEXAFS experiments performed at the 4D, 6D and 10A2 beamlines of the Pohang Accelerator Laboratory (PAL) were supported in part by the Ministry of Science and ICT, POSTECH and UNIST. M.C. acknowledges support from Leverhulme Trust Research Grant RPG-2019-227. S.R., A.A. and M.C. acknowledge the European Union Horizon 2020 research and innovation programme for grant number 785219 and 881603 (Graphene Flagship). A.A. is supported by Project MECHANIC (PCI2018-093120) funded by Ministerio de Ciencia, Innovación y Universidades. The Catalan Institute of Nanoscience and Nanotechnology is funded by the CERCA Programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (grant number SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Covalently functionalized MoS2 with dithiolenes

  • Sideri, Ioanna K.
  • Arenal, Raúl
  • Tagmatarchis, Nikos
Advances are required to develop functionalization routes for MoS2, in both the metallic 1T and semiconducting 2H phase, that will not only enable their easier manipulation and handling in liquid media but also enhance their applicability in diverse technological fields. Herein, we report an original functionalization methodology for covalently incorporating dithiolene units at the periphery of exfoliated 1T- and 2H-MoS2 sheets, by employing a bis(thiolate) salt as a ligand in a green and facile protocol. Extensive characterization of the covalently functionalized materials is presented, along with a pathway for the à la carte chemical manipulation of MoS2. Markedly, the reported methodology may be applied for modifying other transition metal dichalcogenides., Partial support of this work by the project “Advanced Materials and Devices” (MIS 5002409), which is implemented under the “Action for the Strategic Development on the Research and Technological Sector” funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014-2020) and co-financed by Greece and the European Union (European Regional Development Fund) is acknowledged. R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E13_17R) and from EU H2020 program “ESTEEM3” (823717) and “Graphene Flagship“ (785219 and 881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metal-assisted and solvent-mediated synthesis of two-dimensional triazine structures on gram scale

  • Faghani, Abbas
  • Fardin Gholami, Mohammad
  • Trunk, Matthias
  • Müller, Johannes
  • Pachfule, Pradip
  • Vogl, Sarah
  • Donskyi, Ievgen
  • Li, Mingjun
  • Nickl, Philip
  • Shao, Jingjing
  • Huang, Michael
  • Unger, Wolfgang E. S.
  • Arenal, Raúl
  • Koch, Christoph T.
  • Paulus, Beate
  • Rabe, Jürgen P.
  • Thomas, Arne
  • Haag, Rainer
  • Adeli, Mohsen
We thank the German Science Foundation (DFG) for financial support within the grants SFB 765 and SFB 658. M.F.G. and J.P.R. also acknowledge the support of the Cluster of Excellence “Matters of Activity. Image Space Material” funded by the DFG under Germany’s Excellence Strategy EXC 2025-390648296. Furthermore, A.T. acknowledges the DFG for funding within the project TH 1463/12-1. We thank Dr. Andreas Schäfer and Maiko Schulze for solid NMR experiments and we appreciate the effort of Vahid Ahmadi Soureshjani in MALDI-TOF experiments. We acknowledge M. Eng. Jörg M. Stockmann for operating the XPS instrument at the BAM and Prof. Stephanie Reich and Dr. Antonio Setaro for fruitful discussions. 2DTs-HRTEM and -EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) and from the European Union H2020 programs ETN projects “Graphene Flagship” (785219 and 881603), FLAG-ERA - Graphene (MICINN) GATES (PCI2018-093137) and “ESTEEM3” (823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On-Surface Driven Formal Michael AdditionProduces m-PolyanilineOligomers on Pt (111)

  • Ruiz del Árbol, Nerea
  • Sánchez-Sánchez, Carlos
  • Otero, Gonzalo
  • Martínez, José I.
  • Andrés, Pedro L. de
  • Gómez-Herrero, Ana C.
  • Merino, Pablo
  • Piantek, Marten
  • Serrate Donoso, David
  • Lacovig, Paolo
  • Lizzit, Silvano
  • Alemán, José
  • Ellis, Gary James
  • López, María Francisca
  • Martín-Gago, José A.
[EN] On-surface synthesis is emerging as a highly rational bottom-up methodology for the synthesis of molecular structures that are unattainable or complex to obtain by wet chemistry. Here, oligomers of meta-polyaniline, a known ferromagnetic polymer, were synthesized from para-aminophenol building-blocks via an unexpected and highly specific on-surface formal 1, 4 Michael-type addition at the meta position, driven by the reduction of the aminophenol molecule. We rationalize this dehydrogenation and coupling reaction mechanism with a combination of in situ scanning tunneling and non-contact atomic force microscopies, high-resolution synchrotron-based X-ray photoemission spectroscopy and first-principles calculations. This study demonstrates the capability of surfaces to selectively modify local molecular conditions to redirect well-established synthetic routes, such as Michael coupling, towards the rational synthesis of new covalent nanostructures., Spanish MINECO(MAT2017-85089-C2-1-R, RYC-2015–17730), European Research Council (ERC) under contract (ERC-2013-SYG-610256 NANOCOSMOS), Comunidad de Madrid via Programa de InvestigaciónTecnologías 2018 (FOTOART-CMS2018/NMT-4367), and the innovation program under grantagreements 785219 and 881603 (GrapheneCore2 and Gra-pheneCore3-Graphene-based disruptive technologies,re-spectively). CSS acknowledges MCIU for the “RamnyCajal” contract (RYC2018-024364-I). NRdA is grateful tothe Spanish MINECO for support from the FPI program(BES-2015–072642), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical-Based Thickness Measurement of MoO3 Nanosheets

  • Puebla, Sergio
  • Mariscal, A.
  • Serna, Rosalía
  • Munuera, C.
  • Castellanos-Gómez, Andrés
10 pags., 5 figs. -- This article belongs to the Special Issue 2D Materials and Heterostructures with Application in Optoelectronics, Considering that two-dimensional (2D) molybdenum trioxide has acquired more attention in the last few years, it is relevant to speed up thickness identification of this material. We provide two fast and non-destructive methods to evaluate the thickness of MoO3 flakes on SiO2/Si substrates. First, by means of quantitative analysis of the apparent color of the flakes in optical microscopy images, one can make a first approximation of the thickness with an uncertainty of 3 nm. The second method is based on the fit of optical contrast spectra, acquired with micro-reflectance measurements, to a Fresnel law-based model that provides an accurate measurement of the flake thickness with +-2 nm of uncertainty., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement n◦ 755655, ERC-StG 2017 project 2D-TOPSENSE), the European Commission, under the Graphene Flagship (Core 3, grant number 881603), the Spanish Ministry of Economy, Industry and Competitiveness through the grant MAT2017-87134-C2-2-R and partially funded by the Spanish Ministerio de Ciencia e Innovación through grant RTI2018-096498-B-I00 (MCIU/AEI/FEDER, UE). SP acknowledges the fellowship PRE2018-084818.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Boosting the Performance of Graphene Cathodes in Na–O2 Batteries by Exploiting the Multifunctional Character of Small Biomolecules

  • Enterría, Marina
  • Gómez-Urbano, Juan Luis
  • Munuera Fernández, José María
  • Villar Rodil, Silvia
  • Carriazo, Daniel
  • Paredes Nachón, Juan Ignacio
  • Ortiz-Vitoriano, Nagore
Graphene aerogels derived from a biomolecule‐assisted aqueous electrochemical exfoliation route are explored as cathode materials in sodium–oxygen (Na–O2) batteries. To this end, the natural nucleotide adenosine monophosphate (AMP) is used in the multiple roles of exfoliating electrolyte, aqueous dispersant, and functionalizing agent to access high quality, electrocatalytically active graphene nanosheets in colloidal suspension (bioinks). The surface phenomena occurring on the electrochemically derived graphene cathode is thoroughly studied to understand and optimize its electrochemical performance, where a cooperative effect between the nitrogen atoms and phosphates from the AMP molecules is demonstrated. Moreover, the role of the nitrogen atoms in the adenine nucleobase of AMP and short‐chain phosphate is unraveled. Significantly, the use of such cathodes with a proper amount of AMP molecules adsorbed on the graphene nanosheets delivers a discharge capacity as high as 9.6 mAh cm−2 and performs almost 100 cycles with a considerably reduced cell overpotential and a coulombic efficiency of ≈97% at high current density (0.2 mA cm−2). This study opens a path toward the development of environmentally friendly air cathodes by the use of natural nucleotides which offers a great opportunity to explore and manufacture bioinspired cathodes for metal–oxygen batteries., M.E., J.L.G.‐U., D.C., and N.O.‐V. thank the European Union (Graphene Flagship‐Core 3, Grant number 881603) and the Spanish Ministry of Science and Innovation (MICINN/FEDER) (RTI2018‐096199‐B‐I00) for the financial support of this work. J.M.M., J.I.P., and S.V.‐R. gratefully acknowledge funding by the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN), Agencia Estatal de Investigación (AEI), and the European Regional Development Fund (ERDF) through project RTI2018‐100832‐B‐I00, as well as Plan de Ciencia, Tecnología e Innovación (PCTI) 2013‐2017 del Principado de Asturias and the ERDF (project IDI/2018/000233). J.L.G.‐U. is very thankful to the Spanish Ministry of Education, Science and Universities (MICINN) for the FPU grant (16/03498), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bias dependent variability of low-frequency noise in single-layer graphene FETs

  • Mavredakis, Nikolaos
  • Garcia Cortadella, Ramon
  • Illa, Xavi
  • Schäfer, Nathan
  • Bonaccini Calia, Andrea
  • Guimerà-Brunet, Anton
  • Garrido, Jose A.
  • Jiménez, David
Low-frequency noise (LFN) variability in graphene transistors (GFETs) is for the first time researched in this work under both experimental and theoretical aspects. LFN from an adequate statistical sample of long-channel solution-gated single-layer GFETs is measured in a wide range of operating conditions while a physics-based analytical model is derived that accounts for the bias dependence of LFN variance with remarkable performance. LFN deviations in GFETs stem from the variations of the parameters of the physical mechanisms that generate LFN, which are the number of traps (Ntr) for the carrier number fluctuation effect (ΔN) due to trapping/detrapping process and the Hooge parameter (αH) for the mobility fluctuations effect (Δμ). ΔN accounts for an M-shape of normalized LFN variance versus gate bias with a minimum at the charge neutrality point (CNP) as it was the case for normalized LFN mean value while Δμ contributes only near the CNP for both variance and mean value. Trap statistical nature of the devices under test is experimentally shown to differ from classical Poisson distribution noticed at silicon-oxide devices, and this might be caused both by the electrolyte interface in GFETs under study and by the premature stage of the GFET technology development which could permit external factors to influence the performance. This not fully advanced GFET process growth might also cause pivotal inconsistencies affecting the scaling laws in GFETs of the same process., This work was funded by the European Union's Horizon 2020 research and innovation program under Grant Agreement No. GrapheneCore2 785219 and No. GrapheneCore3 881603, Marie Skłodowska-Curie Grant Agreement No. 665919 and Grant Agreement No. 732032 (BrainCom). We also acknowledge financial support by Spanish government under the projects TEC2015-67462-C2-1-R, RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE) and project 001-P-001702-GraphCat: Communitat Emergent de grafè a Catalunya, co-funded by FEDER within the framework of Programa Operatiu FEDER de Catalunya 2014–2020. The ICN2 is also supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Blue emission at atomically sharp 1D heterojunctions between graphene and h-BN

  • Kim, Gwangwoo
  • Ma, Kyung Yeol
  • Park, Minsu
  • Kim, Minsu
  • Jeon, Jonghyuk
  • Song, Jinouk
  • Barrios Vargas, José Eduardo
  • Sato, Yuta
  • Lin, Yung-Chang
  • Suenaga, Kazu
  • Roche, Stephan
  • Yoo, Seunghyup
  • Sohn, Byeong-Hyeok
  • Jeon, Seokwoo
  • Shin, Hyeon Suk
Atomically sharp heterojunctions in lateral two-dimensional heterostructures can provide the narrowest one-dimensional functionalities driven by unusual interfacial electronic states. For instance, the highly controlled growth of patchworks of graphene and hexagonal boron nitride (h-BN) would be a potential platform to explore unknown electronic, thermal, spin or optoelectronic property. However, to date, the possible emergence of physical properties and functionalities monitored by the interfaces between metallic graphene and insulating h-BN remains largely unexplored. Here, we demonstrate a blue emitting atomic-resolved heterojunction between graphene and h-BN. Such emission is tentatively attributed to localized energy states formed at the disordered boundaries of h-BN and graphene. The weak blue emission at the heterojunctions in simple in-plane heterostructures of h-BN and graphene can be enhanced by increasing the density of the interface in graphene quantum dots array embedded in the h-BN monolayer. This work suggests that the narrowest, atomically resolved heterojunctions of in-plane two-dimensional heterostructures provides a future playground for optoelectronics., This work was supported by the research funds (NRF-2017R1E1A1A01074493 and NRF-2019R1A4A1027934) and the grant (CASE-2013M3A6A5073173) from the centre for Advanced Soft Electronics under the Global Frontier Research Program through the National Research Foundation by the Ministry of Science and ICT, Korea. H.S.S. and K.S. thank the A3 foresight program for their collaboration. Y.S., Y.-C.L. and K.S. acknowledge JSPS KAKENHI Grant Numbers JP19K05223, JP18K14119 and JP16H06333, respectively. S.R. acknowledges the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 881603 (Graphene Flagship). ICN2 is funded by the CERCA Programme/Generalitat de Catalunya, and is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). J.E.B.-V. acknowledges funding from PAIP Facultad de Química, UNAM (Grant No. 5000-9173)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Canted persistent spin texture and quantum spin hall effect in WTe2

  • Garcia, Jose H.
  • Vila, Marc
  • Hsu, Chuang-Han
  • Waintal, X.
  • Pereira, Vitor M.
  • Roche, Stephan
We report an unconventional quantum spin Hall phase in the monolayer WTe2, which exhibits hitherto unknown features in other topological materials. The low symmetry of the structure induces a canted spin texture in the yz plane, which dictates the spin polarization of topologically protected boundary states. Additionally, the spin Hall conductivity gets quantized (2e2/h) with a spin quantization axis parallel to the canting direction. These findings are based on large-scale quantum simulations of the spin Hall conductivity tensor and nonlocal resistances in multiprobe geometries using a realistic tight-binding model elaborated from first-principle methods. The observation of this canted quantum spin Hall effect, related to the formation of topological edge states with nontrivial spin polarization, demands for specific experimental design and suggests interesting alternatives for manipulating spin information in topological materials., M. V. acknowledges support from “La Caixa” Foundation and the Centre for Advanced 2D Materials at the National University of Singapore for its hospitality. X. W. acknowledges the ANR Flagera GRANSPORT funding. ICN2 authors were supported by the European Union Horizon 2020 research and innovation programme under Grant Agreement No. 881603 (Graphene Flagship) and No. 824140 (TOCHA, H2020-FETPROACT-01-2018). ICN2 is funded by the CERCA Programme/Generalitat de Catalunya, and is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV2017-0706). V. M. P. acknowledges the support of the National Research Foundation (Singapore) under its Medium-Sized Centre Programme (R-723-000-001-281)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Intracerebral injection of graphene oxide nanosheets mitigates microglial activation without inducing acute neurotoxicity: A pilot comparison to other nanomaterials

  • Portioli, Corinne
  • Bussy, Cyrill
  • Mazza, Mariarosa
  • Lozano, Neus
  • Jasim, Dhifaf
  • Prato, Maurizio
  • Bianco, Alberto
  • Bentivoglio, Marina
  • Kostarelos, Kostas
Carbon‐based nanomaterials (CNMs) are being explored for neurological applications. However, systematic in vivo studies investigating the effects of CNM nanocarriers in the brain and how brain cells respond to such nanomaterials are scarce. To address this, functionalized multiwalled carbon nanotubes and graphene oxide (GO) sheets are injected in mice brain and compared with charged liposomes. The induction of acute neuroinflammatory and neurotoxic effects locally and in brain structures distant from the injection site are assessed up to 1 week postadministration. While significant neuronal cell loss and sustained microglial cell activation are observed after injection of cationic liposomes, none of the tested CNMs induces either neurodegeneration or microglial activation. Among the candidate nanocarriers tested, GO sheets appear to elicit the least deleterious neuroinflammatory profile. At molecular level, GO induces moderate activation of proinflammatory markers compared to vehicle control. At histological level, brain response to GO is lower than after vehicle control injection, suggesting some capacity for GO to reduce the impact of stereotactic injection on brain. While these findings are encouraging and valuable in the selection and design of nanomaterial‐based brain delivery systems, they warrant further investigations to better understand the mechanisms underlying GO immunomodulatory properties in brain., This work was partly supported by the EU H2020 RTD Framework Program: FET Graphene Flagship project (GrapheneCore3, Grant agreement ID: 881603), the Centre National de la Recherche Scientifique (CNRS), the International Center for Frontier Research in Chemistry (icFRC), and the Agence Nationale de la Recherche (ANR) through the LabEx project Chemistry of Complex Systems (ANR‐10‐LABX‐0026_CSC). M.P., as the recipient of the AXA Carbon Bionanotechnology Chair, is grateful to the AXA Research Fund for financial support. MP was also supported by the Spanish Ministry of Economy and Competitiveness MINECO (project CTQ2016‐76721‐R), the University of Trieste, and the Spanish State Research Agency (Maria de Maeztu Units of Excellence Program Grant No. MDM‐2017‐0720). Financial support to this project was partially provided by the Fondazione Cariverona (“Verona Nanomedicine Initiative”) and funding from an intramural (University of Verona) international cooperation program (“CooperInt”) was obtained. K.K. would like to acknowledge the Severo Ochoa Centre of Excellence Award to ICN2., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Real-space observation of vibrational strong coupling between propagating phonon polaritons and organic molecules

  • Bylinkin, Andrei
  • Schnell, Martin
  • Autore, Marta
  • Calavalle, Francesco
  • Li, Peining
  • Taboada-Gutiérrez, Javier
  • Liu, Song
  • Edgar, James H.
  • Casanova, Fèlix
  • Hueso, Luis E.
  • Alonso-González, Pablo
  • Nikitin, Alexey Y.
  • Hillenbrand, Rainer
Phonon polaritons in van der Waals materials can strongly enhance light–matter interactions at mid-infrared frequencies, owing to their extreme field confinement and long lifetimes1,2,3,4,5,6,7. Phonon polaritons thus bear potential for vibrational strong coupling with molecules. Although the onset of vibrational strong coupling was observed spectroscopically with phonon-polariton nanoresonators8, no experiments have resolved vibrational strong coupling in real space and with propagating modes. Here we demonstrate by nanoimaging that vibrational strong coupling can be achieved between propagating phonon polaritons in thin van der Waals crystals (hexagonal boron nitride) and molecular vibrations in adjacent thin molecular layers. We performed near-field polariton interferometry, showing that vibrational strong coupling leads to the formation of a propagating hybrid mode with a pronounced anti-crossing region in its dispersion, in which propagation with negative group velocity is found. Numerical calculations predict vibrational strong coupling for nanometre-thin molecular layers and phonon polaritons in few-layer van der Waals materials, which could make propagating phonon polaritons a promising platform for ultrasensitive on-chip spectroscopy and strong-coupling experiments., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities (national projects MAT2017-88358-C3, RTI2018-094830-B-100, RTI2018-094861-B-100, and the project MDM-2016-0618 of the Maria de Maeztu Units of Excellence Program), the Basque Government (grant numbers IT1164-19 and PIBA-2020-1-0014) and the European Union’s Horizon 2020 research and innovation programme under the Graphene Flagship (grant agreement numbers 785219 and 881603, GrapheneCore2 and GrapheneCore3). F. Calavelle acknowledges support from the European Union H2020 under the Marie Skłodowska-Curie Actions (766025-QuESTech). J.T.-G. acknowledges support through the Severo Ochoa Program from the Government of the Principality of Asturias (number PA-18-PF-BP17-126). P.A.-G. acknowledges support from the European Research Council under starting grant number 715496, 2DNANOPTICA. Further, support from the Materials Engineering and Processing program of the National Science Foundation, award number CMMI 1538127 for h-BN crystal growth is greatly appreciated., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Long-range propagation and interference of d-wave superconducting pairs in graphene

  • Perconte, David
  • Seurre, K.
  • Humbert, V.
  • Ulysse, C.
  • Sander, A.
  • Trastoy, J.
  • Zatko, V.
  • Godel, F.
  • Kidambi, P. R.
  • Hoffmann, S.
  • Zhang, Xian-Peng
  • Bercioux, Dario
  • Bergeret, F. Sebastian
  • Dlubak, Bruno
  • Seneor, Pierre
  • Villegas, Javier E.
Recent experiments have shown that proximity with high-temperature superconductors induces unconventional superconducting correlations in graphene. Here, we demonstrate that those correlations propagate hundreds of nanometers, allowing for the unique observation of d-wave Andreev-pair interferences in YBa2Cu3O7-graphene devices that behave as a Fabry-Perot cavity. The interferences show as a series of pronounced conductance oscillations analogous to those originally predicted by de Gennes–Saint-James for conventional metal-superconductor junctions. The present demonstration is pivotal to the study of exotic directional effects expected for nodal superconductivity in Dirac materials., Work at Unite Mixte de Physique CNRS/Thales supported by the ERC Grant No. 647100 “SUSPINTRONICS,” French ANR Grants No. ANR-15-CE24-0008-01 “SUPERTRONICS” and No. ANR-17-CE30-0018-04 “OPTOFLUXONICS,” Labex NanoSaclay No. ANR-10-LABX-0035, European COST action 16218 “Nanocohybri”, European Union's H2020 Excellent Science (Grants No. 785219 and No. 881603), and JSPS core-to-core program A. Advanced Research Networks. This work was supported by the French RENATECH network (French national nanofabrication platform). X. P. Z., D. B., and F. S. B. acknowledge support from Ministerio de Ciencia e Innovacion (MICINN) through Project No. FIS2017-82804-P. F. S. B. acknowledges Grupos Consolidados UPV/EHU del Gobierno Vasco (Grant No. IT1249-19)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Detailed thermal reduction analyses of graphene oxide via in-situ TEM/EELS studies

  • Peláez-Fernández, Mario
  • Bermejo-Solís, Alba
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
7 figures.-- Supplementary material available.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, We report an in-depth study of the reduction of graphene oxide (GO) by in-situ thermal transmission electron microscopy (TEM) analysis. In-situ heating high-resolution TEM (HRTEM) imaging and electron energy-loss spectroscopy (EELS) measurements have been combined to identify the transformations of different oxygen functional groups, the desorption of physisorbed and chemisorbed water and the graphitisation as a function of the temperature in the range from 70 up to 1200 °C. A model for the general removal of water and OFGs is proposed based on different chemical and physical parameters that have been monitored. All this unique information provides a detailed roadmap of the thermal behaviour of GO at an extended range of temperature. This is not only of interest to understand the thermal reduction process of GO but also of critical relevance to the response of GO in applications when exposed to thermal effects., Research supported by the Spanish MINECO and MICINN (MAT2016-79776-P, AEI/FEDER, EU; PID2019-104739GB-100/AEI/10.13039/501100011033; and PID2019-104272RB-C51/AEI/10.13039/501100011033), Gobierno de Aragon (DGA Grupos Reconocidos E13_17R (FEDER, EU) and T03_20R) and European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC-PCI2018-093137), EU H2020 Enabling Excellence (MSCA-ITN) and Graphene Flagship (881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ reduction by Joule heating and measurement of electrical conductivity of graphene oxide in a transmission electron microscope

  • Hettler, Simon
  • Sebastián del Río, David
  • Peláez-Fernández, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
4 figures.-- Supporting information available on the website of the publisher., Graphene oxide (GO) is reduced by Joule heating using in-situ transmission electron microscopy (TEM). The approach allows the simultaneous study of GO conductivity by electrical measurements and of its composition and structural properties throughout the reduction process by TEM, electron diffraction and electron energy-loss spectroscopy. The small changes of GO properties observed at low applied electric currents are attributed to the promotion of diffusion processes. The actual reduction process starts from an applied power density of about 2 × 1014 Wm−3 and occurs in a highly uniform and localized manner. The conductivity increases more than 4 orders of magnitude reaching a value of 3 × 103 Sm−1 with a final O content of less than 1%. We discuss differences between the reduction by thermal annealing and Joule heating., S.H. and R.A. acknowledge funding by German Research Foundation (DFG project He 7675/1-1). Research supported by the Spanish MINECO and MICINN (MAT2016-79776-P,AEI/FEDER, EU; PID2019-104739GB-100/AEI/10.13039/501100011033; ENE2016-79282-C5-1-R, AEI/FEDER, EU and PID2019-104272RB-C51/AEI/10.13039/501100011033), Government of Aragon (projects DGA E13-17R (FEDER, EU); DGA T03-17R (FEDER, EU) and DGA T03-20R) and European Union H2020 programs “ESTEEM3” (823717), Flag-ERA GATES (JTC - PCI2018-093137), ITN Enabling Excellence (MSCA-ITN) and Graphene Flagship (881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

From high quality packing to disordered nucleation or phase separation in donor/acceptor interfaces: ClAlPc-C60 on Au(111)

  • Barrena, Esther
  • Palacios-Rivera, Rogger
  • Martínez, José I.
  • Ocal, Carmen
The dramatic consequences that the orientation adopted by the molecular dipoles, in diverse arrays of chloroaluminum phthalocyanine (ClAlPc) on Au(111), have on the ulterior adsorption and growth of C60 are explored by means of an all scanning probe microscopy approach. The unidirectional downwards organization of the molecular dipoles at the first layer reduces charge transfer from the metal to C60. Imbalance between attractive and repulsive interactions of the fullerenes are crucial for their ordered supramolecular aggregation. The effect at the basis of such self-assembling seems to be released by the all upwards dipole orientation adopted on the ClAlPc second layer. The low electronic corrugation of the bilayer repercutes in a higher mobility of the fullerenes which for similar coverages diffuse large distances to reach uncoverd first layer regions. Density functional theory calculations corroborate the experimental observations indicating the relevance of charge transfer, potential energy surface corrugation, C60 on-surface diffusion barriers and screening. The structure of the co-adsorbed C60 and ClAlPc layers strongly depends on the deposition sequence. Phase-separation, where each molecule adopts the single-component assembly, occurs if C60 is deposited first. The present results contribute to understanding the influence of the dipolar nature of molecular layers on the electronic and structure of donor/acceptor heterojunctions, which is crucial for device design via engineering the energy levels algingment at the organic-organic and organic-metal interfaces., This work has been supported by the Spanish Government under the project PID2019-110907GB-I00, MAT2016-77852-C2- 1-R and MAT2017-85089-C2-1-R (AEI/FEDER, UE) and the ‘‘Severo Ochoa’’ Program for Centres of Excellence in R&D (CEX2019-000917-S). We also acknowledge the Generalitat de Catalunya grant 2017 SGR668. J.I.M. acknowledges Comunidad de Madrid via “Programa de Investigación Tecnologías 2018” (FOTOART-CM S2018/NMT-4367), and the EU Innovation Program under grant agreement 881603 (GrapheneCore3- Graphene-based disruptive technologies)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantifying thermal transport in buried semiconductor nanostructures via cross-sectional scanning thermal microscopy

  • Spièce, Jean
  • Evangeli, Charalambos
  • Robson, Alexander James
  • Sachat, Alexandros el
  • Haenel, Linda
  • Alonso Carmona, M. Isabel
  • Garriga Bacardi, Miquel
  • Robinson, Benjamin J.
  • Oehme, Michael
  • Schulze, Jörg
  • Alzina, Francesc
  • Sotomayor Torres, C. M.
  • Kolosov, Oleg V.
Managing thermal transport in nanostructures became a major challenge in the development of active microelectronic, optoelectronic and thermoelectric devices, stalling the famous Moore's law of clock speed increase of microprocessors for more than a decade. To find the solution to this and linked problems, one needs to quantify the ability of these nanostructures to conduct heat with adequate precision, nanoscale resolution, and, essentially, for the internal layers buried in the 3D structure of modern semiconductor devices. Existing thermoreflectance measurements and “hot wire” 3ω methods cannot be effectively used at lateral dimensions of a layer below a micrometre; moreover, they are sensitive mainly to the surface layers of a relatively high thickness of above 100 nm. Scanning thermal microscopy (SThM), while providing the required lateral resolution, provides mainly qualitative data of the layer conductance due to undefined tip–surface and interlayer contact resistances. In this study, we used cross-sectional SThM (xSThM), a new method combining scanning probe microscopy compatible Ar-ion beam exit nano-cross-sectioning (BEXP) and SThM, to quantify thermal conductance in complex multilayer nanostructures and to measure local thermal conductivity of oxide and semiconductor materials, such as SiO2, SiGex and GeSny. By using the new method that provides 10 nm thickness and few tens of nm lateral resolution, we pinpoint crystalline defects in SiGe/GeSn optoelectronic materials by measuring nanoscale thermal transport and quantifying thermal conductivity and interfacial thermal resistance in thin spin-on materials used in extreme ultraviolet lithography (eUV) fabrication processing. The new capability of xSThM demonstrated here for the first time is poised to provide vital insights into thermal transport in advanced nanoscale materials and devices., The authors acknowledge the EU QUANTIHEAT FP7 project no. 604668 and the Horizon 2020 Graphene Flagship Core 3 project no. 881603, EPSRC EP/G015570/1 EP/K023373/1, EP/G06556X/1. EP/V00767X/1 and EP/P006973/1 and Faraday Institution NEXGENNA project for the overall support, and Paul Instrument Fund, c/o The Royal Society grant on “Infrared non-contact atomic force microscopy (ncAFM-IR)” for the equipment support. We are also grateful to our industrial collaborators Leica Microsystems, Lancaster Materials Analysis Ltd and Bruker for the financial and instrumentation support. LTD to ICN2 is supported by the Spanish MINECO (Severo Ochoa Centers of Excellence Program under Grant SEV-2017-0706 and CEX2019-000917-S) and by the Generalitat de Catalunya (Grants 2017SGR806, 2017SGR488, and the CERCA Program). We thank Severine Gomès from CNRS and Harry Hoster from Lancaster Energy for the helpful discussions on the measurements, and Andy Cockburn and Mike Kocsic from IMEC for the interesting materials and discussion of applications., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rapid and Efficient Detection of the SARS-CoV-2 Spike Protein Using an Electrochemical Aptamer-Based Sensor

  • Idili, Andrea
  • Parolo, Claudio
  • Álvarez-Diduk, Ruslan
  • Merkoçi, Arben
The availability of sensors able to rapidly detect SARS-CoV-2 directly in biological fluids in a single step would allow performing massive diagnostic testing to track in real time and contain the spread of COVID-19. Motivated by this, here, we developed an electrochemical aptamer-based (EAB) sensor able to achieve the rapid, reagentless, and quantitative measurement of the SARS-CoV-2 spike (S) protein. First, we demonstrated the ability of the selected aptamer to undergo a binding-induced conformational change in the presence of its target using fluorescence spectroscopy. Then, we engineered the aptamer to work as a bioreceptor in the EAB platform and we demonstrated its sensitivity and specificity. Finally, to demonstrate the clinical potential of the sensor, we tested it directly in biological fluids (serum and artificial saliva), achieving the rapid (minutes) and single-step detection of the S protein in its clinical range., ICN2 was funded by the CERCA programme, Generalitat de Catalunya. ICN2 was supported by the Severo Ochoa Centres of Excellence programme and funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). The authors acknowledge Consejo Superior de Investigaciones Científicas (CSIC) for the project “COVID19-122” granted in the call “Nuevas ayudas extraordinarias a proyectos de investigación en el marco de las medidas urgentes extraordinarias para hacer frente al impacto económico y social del COVID-19 (Ayudas CSIC-COVID-19)”. A.I. was supported by PROBIST postdoctoral fellowship funded by the European Research Council (Marie Skłodowska-Curie grant agreement no. 754510). R.A.D. received financial support from the EU Graphene Flagship Core 3 Project (No. 881603). The authors also thank Salvador Bartolomé Piñol, PhD and the Laboratori Luminescència i Espectroscòpia Biomolècules (LLEB) of the Autonomous University of Barcelona (UAB)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Giant optical anisotropy in transition metal dichalcogenides for next-generation photonics

  • Ermolaev, G. A.
  • Voronin, Kirill V.
  • Kravets, Vasyl G.
  • Duan, Jiahua
  • Bylinkin, Andrei
  • Baranov, Denis G.
  • Nikitin, Alexey Y.
  • Alonso-González, Pablo
  • Grigorenko, Alexander N.
  • Novoselov, Kostya S.
  • Volkov, Valentyn S.
et al., Large optical anisotropy observed in a broad spectral range is of paramount importance for efficient light manipulation in countless devices. Although a giant anisotropy has been recently observed in the mid-infrared wavelength range, for visible and near-infrared spectral intervals, the problem remains acute with the highest reported birefringence values of 0.8 in BaTiS3 and h-BN crystals. This issue inspired an intensive search for giant optical anisotropy among natural and artificial materials. Here, we demonstrate that layered transition metal dichalcogenides (TMDCs) provide an answer to this quest owing to their fundamental differences between intralayer strong covalent bonding and weak interlayer van der Waals interaction. To do this, we made correlative far- and near-field characterizations validated by first-principle calculations that reveal a huge birefringence of 1.5 in the infrared and 3 in the visible light for MoS2. Our findings demonstrate that this remarkable anisotropy allows for tackling the diffraction limit enabling an avenue for on-chip next-generation photonics., We gratefully acknowledge financial support from the Ministry of Science and Higher Education of the Russian Federation (No. 0714-2020-0002) and the Russian Foundation for Basic Research (20-07-00475, 18-29-02089 and 20-07-00840). A.Y.N. acknowledges the Spanish Ministry of Science, Innovation and Universities (national project no. MAT201788358-C3-3-R) and the Basque Department of Education (grant PIBA-2020-1-0014). P.A-G. and J.D. acknowledge financial support from the European Research Council under Starting Grant 715496, 2DNANOPTICA. A.N.G., V.G.K. and K.S.N. acknowledges support from EU Graphene Flagship Core 3 (881603). K.S.N. also acknowledges support from EU Flagship Program 2D-SIPC Quantum Technology, European Research Council Synergy Grant Hetero2D, the Royal Society, EPSRC grants EP/N010345/1, EP/P026850/1, EP/S030719/1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

LiCl Photodissociation on Graphene: A Photochemical Approach to Lithium Intercalation

  • Azpeitia-Urkia, Jon
  • Merino, Pablo
  • Ruiz-Gómez, Sandra
  • Foerster, Michael
  • Aballe, Lucía
  • García-Hernández, Mar
  • Martín-Gago, José A.
  • Palacio, Irene
[EN] The interest in the research of the structural and electronic properties between graphene and lithium has bloomed since it has been proven that the use of graphene as an anode material in lithium-ion batteries ameliorates their performance and stability. Here, we investigate an alternative route to intercalate lithium underneath epitaxially grown graphene on iridium by means of photon irradiation. We grow thin films of LiCl on top of graphene on Ir(111) and irradiate the system with soft X-ray photons, which leads to a cascade of physicochemical reactions. Upon LiCl photodissociation, we find fast chlorine desorption and a complex sequence of lithium intercalation processes. First, it intercalates, forming a disordered structure between graphene and iridium. On increasing the irradiation time, an ordered Li(1 × 1) surface structure forms, which evolves upon extensive photon irradiation. For sufficiently long exposure times, lithium diffusion within the metal substrate is observed. Thermal annealing allows for efficient lithium desorption and full recovery of the pristine G/Ir(111) system. We follow in detail the photochemical processes using a multitechnique approach, which allows us to correlate the structural, chemical, and electronic properties for every step of the intercalation process of lithium underneath graphene., This work was supported by the EU Graphene Flagship funding (Grant Graphene Core3 881603), the Spanish MICINN (MAT2017-85089-C2-1R, PID2020-115987RJ-I00 and PID2020-113142RB-C21) and the EU via the ERC-Synergy Program (Grant ERC-2013-SYG-610256 NANOCOSMOS), and the European Structural Funds via the FotoArt-CM project (P2018/NMT-4367)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene on two-dimensional hexagonal BN, AlN, and GaN: Electronic, spin-orbit, and spin relaxation properties

  • Zollner, Klaus
  • Cummings, Aron W.
  • Roche, Stephan
  • Fabian, Jaroslav
We investigate the electronic band structure of graphene on a series of two-dimensional hexagonal nitride insulators hXN, X=B, Al, and Ga, with first-principles calculations. A symmetry-based model Hamiltonian is employed to extract orbital parameters and spin-orbit coupling (SOC) from the low-energy Dirac bands of the proximitized graphene. While commensurate hBN induces a staggered potential of about 10 meV into the Dirac band structure, less lattice-matched hAlN and hGaN disrupt the Dirac point much less, giving a staggered gap below 100 μeV. Proximitized intrinsic SOC surprisingly does not increase much above the pristine graphene value of 12 μeV; it stays in the window of 1–16 μeV, depending strongly on stacking. However, Rashba SOC increases sharply when increasing the atomic number of the boron group, with calculated maximal values of 8, 15, and 65 μeV for B-, Al-, and Ga-based nitrides, respectively. The individual Rashba couplings also depend strongly on stacking, vanishing in symmetrically sandwiched structures, and can be tuned by a transverse electric field. The extracted spin-orbit parameters were used as input for spin transport simulations based on Chebyshev expansion of the time-evolution of the spin expectation values, yielding interesting predictions for the electron spin relaxation. Spin lifetime magnitudes and anisotropies depend strongly on the specific (hXN)/graphene/hXN system, and they can be efficiently tuned by an applied external electric field as well as the carrier density in the graphene layer. A particularly interesting case for experiments is graphene/hGaN, in which the giant Rashba coupling is predicted to induce spin lifetimes of 1–10 ns, short enough to dominate over other mechanisms, and lead to the same spin relaxation anisotropy as that observed in conventional semiconductor heterostructures: 50%, meaning that out-of-plane spins relax twice as fast as in-plane spins., This work was funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) SFB 1277 (Project-ID 314695032), DFG SPP 1666, DFG SPP 2244, and the European Unions Horizon 2020 research and innovation program under Grant No. 881603 (Graphene Flagship). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Integrating gold nanoclusters, folic acid and reduced graphene oxide for nanosensing of glutathione based on “turn-off” fluorescence

  • Wong, Xin Yi
  • Quesada-González, Daniel
  • Manickam, Sivakumar
  • New, Siu Yee
  • Muthoosamy, Kasturi
  • Merkoçi, Arben
Glutathione (GSH) is a useful biomarker in the development, diagnosis and treatment of cancer. However, most of the reported GSH biosensors are expensive, time-consuming and often require complex sample treatment, which limit its biological applications. Herein, a nanobiosensor for the detection of GSH using folic acid-functionalized reduced graphene oxide-modified BSA gold nanoclusters (FA-rGO-BSA/AuNCs) based on the fluorescence quenching interactions is presented. Firstly, a facile and optimized protocol for the fabrication of BSA/AuNCs is developed. Functionalization of rGO with folic acid is performed using EDC/NHS cross-linking reagents, and their interaction after loading with BSA/AuNCs is demonstrated. The formation of FA-rGO, BSA/AuNCs and FA-rGO-BSA/AuNCs are confirmed by the state-of-art characterization techniques. Finally, a fluorescence turn-off sensing strategy is developed using the as-synthesized FA-rGO-BSA/AuNCs for the detection of GSH. The nanobiosensor revealed an excellent sensing performance for the detection of GSH with high sensitivity and desirable selectivity over other potential interfering species. The fluorescence quenching is linearly proportional to the concentration of GSH between 0 and 1.75 µM, with a limit of detection of 0.1 µM under the physiological pH conditions (pH 7.4). Such a sensitive nanobiosensor paves the way to fabricate a “turn-on” or “turn-off” fluorescent sensor for important biomarkers in cancer cells, presenting potential nanotheranostic applications in biological detection and clinical diagnosis., This work was supported by the Fundamental Research Grant Scheme (FRGS), Ministry of Higher Education (MOHE), Malaysia [FRGS/1/2016/STG07/UNIM/02/1] and by the CERCA Programme/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, Grant no. SEV-2017-0706). We acknowledge support from Ministerio de Economía, Industria y Competitividad (MINECO), Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) for funding the project MAT2017-87202-P. Authors acknowledge the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 881603 (Graphene Flagship Core 3)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Shedding plasma membrane vesicles induced by graphene oxide nanoflakes in brain cultured astrocytes

  • Musto, Mattia
  • Parisse, Pietro
  • Pachetti, Maria
  • Memo, Christian
  • Di Mauro, Giuseppe
  • Ballesteros, Belén
  • Lozano, Neus
  • Kostarelos, Kostas
  • Casalis, Loredana
  • Ballerini, Laura
Referred to by: Musto, Pietro Parisse, Maria Pachetti, Christian Memo, Giuseppe Di Mauro, Belen Ballesteros, Neus Lozano, Kostas Kostarelos, Loredana Casalis, Laura Ballerini. Corrigendum to Shedding plasma membrane vesicles induced by graphene oxide nanoflakes in brain cultured astrocytes [CARBON 176 (2021) 458–469] Carbon, Volume 178, 30 June 2021, Pages 824., Microvesicles (MVs) generated and released by astrocytes, the brain prevalent cells, crucially contribute to intercellular communication, representing key vectorized systems able to spread and actively transfer signaling molecules from astrocytes to neurons, ultimately modulating target cell functions. The increasing clinical relevance of these signaling systems requires a deeper understanding of MV features, currently limited by both their nanoscale dimensions and the low rate of their constituent release. Hence, to investigate the features of such glial signals, nanotechnology-based approaches and the applications of unconventional, cost-effective tools in generating MVs are needed. Here, small graphene oxide (s-GO) nanoflakes are used to boost MVs shedding from astrocytes in cultures and s-GO generated MVs are compared with those generated by a natural stimulant, namely ATP, by atomic force microscopy, light scattering, attenuated total reflection–fourier transform infra-red and ultraviolet resonance Raman spectroscopy. We also report the ability of both types of MVs, upon acute and transient exposure of patch clamped cultured neurons, to modulate basal synaptic transmission, inducing a stable increase in synaptic activity accompanied by changes in neuronal plasma membrane elastic features., We acknowledge the financial support from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement no. 785219 and no. 881603 Graphene Flagship. MM, PP and LC acknowledge CERIC-ERIC proposal grant n. 20167063 for the IR measurements, performed at the SISSI-Bio beamline of Elettra Sincrotrone Trieste. PP and LC acknowledge also the European Regional Development Fund and Interreg V-A Italia-Austria 2014–2020 project EXOTHERA (ITAT1036)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Valley Hall effect and nonlocal resistance in locally gapped graphene

  • Aktor, Thomas
  • Garcia, Jose H.
  • Roche, Stephan
  • Jauho, Antti-Pekka
  • Power, Stephen R.
We report on the emergence of bulk, valley-polarized currents in graphene-based devices, driven by spatially varying regions of broken sublattice symmetry, and revealed by nonlocal resistance (RNL) fingerprints. By using a combination of quantum transport formalisms, giving access to bulk properties as well as multiterminal device responses, the presence of a nonuniform local band gap is shown to give rise to valley-dependent scattering and a finite Fermi-surface contribution to the valley Hall conductivity, related to characteristics of RNL. These features are robust against disorder and provide a plausible interpretation of controversial experiments in graphene/hexagonal boron nitride superlattices. Our findings suggest both an alternative mechanism for the generation of valley Hall effect in graphene and a route towards valley-dependent electron optics, by materials and device engineering., S.R.P. acknowledges funding from the Irish Research Council under the Laureate awards program. J.H.G. and S.R. acknowledge funding from the European Union Seventh Framework Programme under Grant No. 881603 (Graphene Flagship). ICN2 is funded by the CERCA Programme/Generalitat de Catalunya and supported by the Severo Ochoa programme (MINECO Grant. No. SEV-2017-0706). The Center for Nanostructured Graphene is sponsored by the Danish National Research Foundation, Project No. DNRF103., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Coherent coupling between vortex bound states and magnetic impurities in 2D layered superconductors

  • Park, Sunghun
  • Barrena, Víctor
  • Mañas Valero, Samuel
  • Baldoví, José J.
  • Fente, Antón
  • Herrera, Edwin
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Rubio, Angel
  • Coronado, Eugenio
  • Guillamón, Isabel
  • Levy Yeyati, Alfredo
  • Suderow, Hermann
Bound states in superconductors are expected to exhibit a spatially resolved electron-hole asymmetry which is the hallmark of their quantum nature. This asymmetry manifests as oscillations at the Fermi wavelength, which is usually tiny and thus washed out by thermal broadening or by scattering at defects. Here we demonstrate theoretically and confirm experimentally that, when coupled to magnetic impurities, bound states in a vortex core exhibit an emergent axial electron-hole asymmetry on a much longer scale, set by the coherence length. We study vortices in 2H-NbSe2 and in 2H-NbSe1.8S0.2 with magnetic impurities, characterizing these with detailed Hubbard-corrected density functional calculations. We find that the induced electron-hole imbalance depends on the band character of the superconducting material. Our results show that coupling between quantum bound states in superconductors is remarkably robust and has a strong influence in tunneling measurements., This work was supported by the EU (ERC-StG-679080, ERC-2015-AdG-694097, ERC AdG Mol-2D 788222 and H2020-MSCAIF-2016-751047), by FET-OPEN program (grant 862893 FATMOLS), by EU program Cost (NANOCOHYBRI CA16218 and MOLSPIN CA15128), by Graphene Flagship (grant agreement number 881603, GrapheneCore3 project), by the Spanish State Research Agency (FIS2017-84330-R, RYC-2014-15093, MDM-2014-0377, MDM-2015-0538, CEX2018-000805-M, MAT2017-89993-R co-financed by FEDER and CEX2019-000919-M), by the Deutsche Forschungsgemeinschaft (DFG) under under Germany’s Excellence Strategy— Cluster of Excellence Advanced Imaging of Matter (AIM) EXC 2056—390715994, RTG 1995 and GRK 2247, by the Comunidad de Madrid through program NANOMAGCOST-CM (Program No.S2018/NMT-4321) and by the Generalitat Valenciana (Grupos Consolidados IT1249-19, Prometeo Programme, iDiFEDER/2018/061 and CDEIGENT/2019/022). J.J.B. acknowledges the Marie Curie Fellowship program (H2020-MSCA-IF-2016-751047). A.R. acknowledges support by the MPI-New York City Center for Non-Equilibrium Quantum Phenomena. H.S., E.H., and I.G. acknowledge SEGAINVEX at UAM for design and construction of STM cryogenic equipment. S.P. acknowledges Banco Santander - María de Maeztu program (ref. 102I0112)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced light–matter interaction in 10B monoisotopic boron nitride infrared nanoresonators

  • Autore, Marta
  • Dolado, Irene
  • Li, Peining
  • Esteban, Ruben
  • Alfaro-Mozaz, Francisco J.
  • Atxabal, Ainhoa
  • Liu, Song
  • Edgar, James H.
  • Vélez, Saül
  • Casanova, Félix
  • Hueso, Luis E.
  • Aizpurua, Javier
  • Hillenbrand, Rainer
Phonon-polaritons, mixed excitations of light coupled to lattice vibrations (phonons), are emerging as a powerful platform for nanophotonic applications. This is because of their ability to concentrate light into extreme sub-wavelength scales and because of their longer phonon lifetimes compared to their plasmonic counterparts. In this work, the infrared properties of phonon-polaritonic nanoresonators made of monoisotopic 10B hexagonal boron nitride (h-BN) are explored, a material with increased phonon-polariton lifetimes compared to naturally abundant h-BN due to reduced photon scattering from randomly distributed isotopes. An average relative improvement of 50% of the quality factor of monoisotopic h-BN nanoresonators is obtained with respect to nanoresonators made of naturally abundant h-BN, allowing for the sensing of nanometric-thick films of molecules through both surface-enhanced absorption spectroscopy and refractive index sensing. Further, even strong coupling between molecular vibrations and the phonon-polariton resonance in monoisotopic h-BN ribbons can be achieved., The authors acknowledge funding from the Graphene Flagship (Core2 and Core3), the Spanish Ministry of Science and Innovation (projects MDM-2016-0618 of the Maria de Maeztu Units of Excellence Programme and national projects (RTI2018-094830-B-100, RTI2018-094861-B-100, and PID2019-107432GB-I00)), and the Basque Government (project GIU18/202, Ekartek project KK-2018/00001, IT1164-19, and PhD fellowships PRE_2018_2_0253 and PRE_2017_2_0052). The h-BN crystal growth was supported by the National Science Foundation, grant CMMI 1538127 and the II-VI Foundation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

van der Waals driven anharmonic melting of the 3D charge density wave in VSe2

  • Diego, Josu
  • Said, A. H.
  • Mahatha, Sanjoy K.
  • Bianco, Raffaello
  • Monacelli, Lorenzo
  • Calandra, Matteo
  • Mauri, Francesco
  • Rossnagel, K.
  • Errea, Ion
  • Blanco-Canosa, Santiago
Understanding of charge-density wave (CDW) phases is a main challenge in condensed matter due to their presence in high-Tc superconductors or transition metal dichalcogenides (TMDs). Among TMDs, the origin of the CDW in VSe2 remains highly debated. Here, by means of inelastic x-ray scattering and first-principles calculations, we show that the CDW transition is driven by the collapse at 110 K of an acoustic mode at qCDW = (2.25 0 0.7) r.l.u. The softening starts below 225 K and expands over a wide region of the Brillouin zone, identifying the electron-phonon interaction as the driving force of the CDW. This is supported by our calculations that determine a large momentum-dependence of the electron-phonon matrix-elements that peak at the CDW wave vector. Our first-principles anharmonic calculations reproduce the temperature dependence of the soft mode and the TCDW onset only when considering the out-of-plane van der Waals interactions, which reveal crucial for the melting of the CDW phase., S.B-C thanks the MINECO of Spain through the project PGC2018-101334-A-C22. F.M. and L.M. acknowledge support by the MIUR PRIN-2017 program, project number 2017Z8TS5B. M.C. acknowledges support from Agence Nationale de la Recherche, Project ACCEPT, Grant No. ANR-19-CE24-0028 and M.C and F.M. the Graphene Flagship Core 3. Calculations were performed at the Joliot Curie-AMD supercomputer under the PRACE project RA4956. This research used resources of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility, operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357., Peer reviewed