Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Biodegradable albumen dielectrics for high-mobility MoS2 phototransistors

  • Pucher, Thomas
  • Bastante Flores, Pablo
  • Parenti, Federico
  • Xie, Yong
  • Dimaggio, Elisabetta
  • Fiori, Gianluca
  • Castellanos Gómez, Andrés
This work demonstrates the fabrication and characterization of single-layer MoS2 field-effect transistors using biodegradable albumen (chicken eggwhite) as gate dielectric. By introducing albumen as an insulator for MoS2 transistors high carrier mobilities (up to ~90 cm2 V−1 s−1) are observed, which is remarkably superior to that obtained with commonly used SiO2 dielectric which we attribute to ionic gating due to the formation of an electric double layer in the albumen MoS2 interface. In addition, the investigated devices are characterized upon illumination, observing responsivities of 4.5 AW−1 (operated in photogating regime) and rise times as low as 52 ms (operated in photoconductivity regime). The presented study reveals the combination of albumen with van der Waals materials for prospective biodegradable and biocompatible optoelectronic device applications. Furthermore, the demonstrated universal fabrication process can be easily adopted to fabricate albumen-based devices with any other van der Waals material, This work was funded by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 755655, ERC-StG 2017 project 2D-TOPSENSE), ERC PEP2D (Contract No. 770047) and the Ministry of Science and Innovation (Spain) through the project PID2020-115566RB-I00. We also acknowledge funding from the EU FLAG-ERA project To2Dox (JTC-2019-009) and the Comunidad de Madrid through the CAIRO-CM project (Y2020/NMT-6661). Financial supports from the National Natural Science Foundation of China (NSFC) Grants (No. 62011530438, No. 61704129) are acknowledged. This work was partially supported by the Key Research and Development Program of Shaanxi (Program No. 2021KW-02), Fundamental Research Funds for the Central Universities (QTZX23026) and the fund of the State Key Laboratory of Solidification Processing in Northwestern Polytechnical University (grant no. SKLSP201612)
Digibug. Repositorio Institucional de la Universidad de Granada
Publication Artículo científico (JournalArticle)

Electronic Transport in 2D-Based Printed FETs from a Multiscale Perspective

  • Perucchini, Marta
  • González Marín, Enrique
The authors gratefully acknowledge the ERC PEP2D (contract no. 770047) and H2020 WASP (contract no. 825213) and the Crosslab Department of Excellence project for financial support. E.G.M. also acknowledges the support by the Spanish MCI through the project PID2020-116518GB-I00 and by the Junta de Andalucia-Consejeria de Economia y Conocimiento/FEDER-EU through the Project A-TIC-646-UGR20. Open access funding provided by Universita degli Studi di Pisa within the CRUI-CARE Agreement., As 2D materials (2DMs) gain the research limelight as a technological option for obtaining on-demand printed low-cost integrated circuits with reduced environmental impact, theoretical methods able to provide the necessary fabrication guidelines acquire fundamental importance. Here, a multiscale modeling technique is exploited to study electronic transport in devices consisting of a printed 2DM network of flakes. The approach implements a Monte Carlo scheme to generate the flake distribution. By means of ab initio density functional theory calculations together with non equilibrium Green’s functions formalism, detailed physical insights on flake-to-flake transport mechanisms are provided. This later feeds a 3D drift-diffusion and Poisson solution to compute self-consistently transport and electrostatics in the device. The method is applied to MoS2 and graphene-based dielectrically gated FETs, highlighting the impact of the structure density and variability on the mobility and sheet resistance. The prediction capability of the proposed approach is validated against electrical measurements of in-house printed graphene conductive lines as a function of film thickness, demonstrating its strong potential as a guide for future experimental activity in the field., ERC PEP2D 770047, H2020 WASP 825213, Crosslab Department of Excellence project, Spanish Government PID2020-116518GB-I00, Junta de Andalucia-Consejeria de Economia y Conocimiento/FEDER-EU A-TIC-646-UGR20, Universita degli Studi di Pisa within the CRUI-CARE Agreement
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Rhombohedral-stacked bilayer transition metal dichalcogenides for high-performance atomically thin CMOS devices

  • Li, Xuefei
  • Shi, Xinhang
  • Marian, Damiano
  • Soriano, David
  • Cusati, Teresa
  • Iannaccone, Giuseppe
  • Fiori, Gianluca
  • Guo, Qi
  • Zhao, Wenjie
  • Wu, Yanqing
  • Soriano, David|||/items/3feef815-ce01-447c-bdc2-e0ee70935b93
Van der Waals coupling with different stacking configurations is emerging as a powerful method to tune the optical and electronic properties of atomically thin two-dimensional materials. Here, we investigate 3R-stacked transition-metal dichalcogenides as a possible option for high-performance atomically thin field-effect transistors (FETs). We report that the effective mobility of 3R bilayer WS2 (WSe2) is 65% (50%) higher than that of 2H WS2 (WSe2). The 3R bilayer WS2 n-type FET exhibits a high on-state current of 480 μA/μm at Vds = 1 V and an ultralow on-state resistance of 1 kilohm·μm. Our observations, together with multiscale simulations, reveal that these improvements originate from the strong interlayer coupling in the 3R stacking, which is reflected in a higher conductance compared to the 2H stacking. Our method provides a general and scalable route toward advanced channel materials in future electronic devices for ultimate scaling, especially for complementary metal oxide semiconductor applications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Printed transistors made of 2D material-based inks

  • Conti, Silvia
  • Calabrese, Gabriele
  • Parvez, Khaled
  • Pimpolari, Lorenzo
  • Pieri, Francesco
  • Iannaccone, Giuseppe
  • Casiraghi, Cinzia
  • Fiori, Gianluca
Large-area electronics for the Internet of Things requires a new generation of light-weight, flexible, low-power electronics, based on advanced materials able to provide high-throughput fabrication of reliable, stable and cost-effective field-effect transistors that can be easily integrated onto flexible substrates such as plastic, paper and textiles. The family of 2D materials comprises a range of crystals with different chemical composition, structures and electronic properties that can be used as building blocks in transistors. Solution processing of 2D materials does not require the use of glove boxes, can be performed with minimal chemical processing and enables the use of printing technologies for device fabrication — these factors represent a critical advantage over traditional high-performance materials in terms of ease of processing, compatibility with flexible substrates, fabrication costs, large-volume manufacturing and scalability. Nevertheless, the electronic quality of solution-processed 2D materials is a bottleneck for the development of next-generation printed and flexible devices. This Review surveys solution-processed 2D material-based transistors, discussing the figures of merit, state of art and performance limits of devices, and describes the open challenges and future perspectives of this field., The authors acknowledge the ERC PEP2D (Contract No. 770047) and the Graphene Flagship Core 3 (Contract No. 881603). This work was partially supported by the Italian Ministry of Education and Research (MIUR) in the framework of the FoReLab project (Departments of Excellence)., Peer reviewed