Skip to main content

ELECTRONICA BIO-INSPIRADA BASADA EN TRANSISTORES DE GRAFENO Y MATERIALES 2D CONTROLADOS POR ELECTROLITOS

PID2020-116518GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE GRANADA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Interfacial Phenomena Governing Performance of Graphene Electrodes in Aqueous Electrolyte

  • Delgà-Fernández, Marta|||0000-0001-7434-8593
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Pérez-Marín, Antonio Pablo|||0000-0003-1843-8273
  • Marin, Enrique G|||0000-0002-0302-3764
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Garrido, Jose|||0000-0001-5621-1067
  • Del Corro, Elena|||0000-0001-6452-9139
There is evidence of the presence of intercalated water between graphene and the substrate in electronic devices. However, a proper understanding of the impact of this phenomenon, which causes important limitations for the optimization of graphene-based devices operating in aqueous electrolytes, is missing. We used graphene-based electrodes on insulating and conducting substrates to evaluate the impact of intercalated water by combining experimental techniques with numerical simulations. Results show that the capacitance of the conductive substrate/graphene electrodes is significantly higher than that of the insulating substrate/graphene ones. Meanwhile, Raman spectroscopy demonstrates that graphene charge modulation with the applied potential is independent of the substrate conductivity. We found that this intriguing behavior is influenced by the water intercalation phenomena and governed by the substrate conductive nature. This work contributes to the understanding of the electric response of graphene-based devices in an aqueous environment and of the methods to measure and model it.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Reconfigurable frequency multipliers based on graphene field-effect transistors

  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Ganeriwala, M. D.
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Jiménez, David|||0000-0002-8148-198X
  • Godoy Medina, Andres|||0000-0002-3014-8765
Run-time device-level reconfigurability has the potential to boost the performance and functionality of numerous circuits beyond the limits imposed by the integration density. The key ingredient for the implementation of reconfigurable electronics lies in ambipolarity, which is easily accessible in a substantial number of two-dimensional materials, either by contact engineering or architecture device-level design. In this work, we showcase graphene as an optimal solution to implement high-frequency reconfigurable electronics. We propose and analyze a split-gate graphene field-effect transistor, demonstrating its capability to perform as a dynamically tunable frequency multiplier. The study is based on a physically based numerical simulator validated and tested against experiments. The proposed architecture is evaluated in terms of its performance as a tunable frequency multiplier, able to switch between doubler, tripler or quadrupler operation modes. Different material and device parameters are analyzed, and their impact is assessed in terms of the reconfigurable graphene frequency multiplier performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Compact Modeling of pH-Sensitive FETs Based on 2-D Semiconductors

  • Grour, Tarek El|||0000-0003-2963-7104
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Najari, Montassar|||0000-0002-5382-8528
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Jiménez, David|||0000-0002-8148-198X
  • Mir, Lassaad El
We present a physics-based circuit-compatible model for pH-sensitive field-effect transistors based on 2-D materials. The electrostatics along the electrolyte-gated 2-D-semiconductor stack is treated by solving the Poisson equation, including the site-binding model and the Gouy-Chapman-Stern approach, while the carrier transport is described by the drift-diffusion theory. The proposed model is provided in an analytical form and then implemented in Verilog-A, making it compatible with standard technology computer-aided design tools employed for circuit simulation. The model is benchmarked against two experimental transition-metal-dichalcogenide (MoS2 and ReS2)-based ion sensors, showing excellent agreement when predicting the drain current, threshold voltage shift, and current/voltage sensitivity measurements for different pH concentrations.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Exploiting Ambipolarity in Graphene Field-Effect Transistors for Novel Designs on High-Frequency Analog Electronics

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Ramos Silva, Javier Noé|||0000-0002-7644-6215
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Pardo, Mari Carmen
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Ramirez-Garcia, Eloy|||0000-0002-2594-621X
  • Jiménez, David|||0000-0002-8148-198X
  • Marin, Enrique G.|||0000-0002-0302-3764
Exploiting ambipolar electrical conductivity based on graphene field-effect transistors has raised enormous interest for high-frequency (HF) analog electronics. Controlling the device polarity, by biasing the graphene transistor around the vertex of the V-shaped transfer curve, enables to redesign and highly simplify conventional analog circuits, and simultaneously to seek for multifunctionalities, especially in the HF domain. This study presents new insights for the design of different HF applications such as power amplifiers, mixers, frequency multipliers, phase shifters, and modulators that specifically leverage the inherent ambipolarity of graphene-based transistors.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interfacial phenomena governing performance of graphene electrodes in aqueous electrolyte

  • Delgà-Fernández, Marta
  • Toral-Lopez, Alejandro
  • Guimerà-Brunet, Anton
  • Pérez-Marín, Antonio Pablo
  • Marin, Enrique G.
  • Godoy, Andrés
  • Garrido, Jose A.
  • Del Corro, Elena
There is evidence of the presence of intercalated water between graphene and the substrate in electronic devices. However, a proper understanding of the impact of this phenomenon, which causes important limitations for the optimization of graphene-based devices operating in aqueous electrolytes, is missing. We used graphene-based electrodes on insulating and conducting substrates to evaluate the impact of intercalated water by combining experimental techniques with numerical simulations. Results show that the capacitance of the conductive substrate/graphene electrodes is significantly higher than that of the insulating substrate/graphene ones. Meanwhile, Raman spectroscopy demonstrates that graphene charge modulation with the applied potential is independent of the substrate conductivity. We found that this intriguing behavior is influenced by the water intercalation phenomena and governed by the substrate conductive nature. This work contributes to the understanding of the electric response of graphene-based devices in an aqueous environment and of the methods to measure and model it., M.D.-F. acknowledges that this work has been done within the framework of the Ph.D. program in Materials Science of the Autonomous University of Barcelona. This work has received funding from the Spanish State Research Agency through PRE2018-086251 funded by MCIN/AEI/10.13039/501100011033 and FSE, UE, the PID2020-113663RB-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union’s Horizon 2020 research and innovation programs under Grant Agreement No. 881603 (Graphene Flagship Core Project 3). This work is supported by the Generalitat de Catalunya (2021-SGR-01534) and the Spanish Government through Project PID2020-116518GB-I00 funded by MCIN/AEI/10.13039/501100011033 and Project TED2021-129769B-I00 funded by MCIN/AEI/10.13039/501100011033 by the European Union NextGenerationEU/PRTR. Part of this work has made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MICINN and the ICTS NANBIOSIS, more specifically, by the MicroNanoTechnology Unit U8 of the CIBER-BBN. This project has also been funded by the Generalitat de Catalunya (2021SGR00495), by the Spanish Ministerio de Ciencia e Innovación (PID2021-126117NA-I00, PLEC2022-009232,), and by CIBER-BBN (CB06/01/0049). E.d.C. acknowledges the RYC2019-027879-I Grant funded by MCIN/AEI/10.13039/501100011033., Peer reviewed