Skip to main content

Towards hybrid silicon-graphene integration

FJC2020-046213-I

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Formación
Call Juan de la Cierva Formación
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

High-Data-Rate Modulators Based on Graphene Transistors, Device Circuit Co-Design Proposals †

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Ramos Silva, Javier Noé|||0000-0002-7644-6215
  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Ramirez-Garcia, Eloy|||0000-0002-2594-621X
  • Jiménez, David|||0000-0002-8148-198X
The multifunctionality feature of graphene field-effect transistors (GFETs) is exploited here to design circuit building blocks of high-data-rate modulators by using a physics-based compact model. Educated device performance projections are obtained with the experimentally calibrated model and used to choose an appropriate improved feasible GFET for these applications. Phase-shift and frequency-shift keying (PSK and FSK) modulation schemes are obtained with (Formula presented.) (Formula presented.) (Formula presented.) GFET-based multifunctional circuits used alternatively in different operation modes: inverting and in-phase amplification and frequency multiplication. An adequate baseband signal applied to the transistors' input also serves to enhance the device and circuit performance reproducibility since the impact of traps is diminished. Quadrature PSK is also achieved by combining two GFET-based multifunctional circuits. This device circuit co-design proposal intends to boost the heterogeneous implementation of graphene devices with incumbent technologies into a single chip: the baseband pulses can be generated with CMOS technology as a front end of line and the multifunctional GFET-based circuits as a back end of line.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Physics-based bias-dependent compact modeling of 1/f noise in single- to few-layer 2D-FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Alam, Hasibul|||0000-0002-4923-0873
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Martinez, Javier
  • Garrido, Jose|||0000-0001-5621-1067
  • Akinwande, Deji|||0000-0001-7133-5586
  • Jiménez, David|||0000-0002-8148-198X
1/f noise is a critical figure of merit for the performance of transistors and circuits. For two-dimensional devices (2D-FETs), and especially for applications in the GHz range where short-channel FETs are required, the velocity saturation (VS) effect can result in the reduction of 1/f noise at high longitudinal electric fields. A new physics-based compact model has been for the first time introduced for single- to few-layer 2D-FETs in this study, precisely validating 1/f noise experiments for various types of devices. The proposed model mainly accounts for the measured 1/f noise bias dependence as the latter is defined by different physical mechanisms. Thus, analytical expressions are derived, valid in all regions of operation in contrast to conventional approaches available in the literature so far, accounting for carrier number fluctuation (ΔN), mobility fluctuation (Δμ) and contact resistance (ΔR) effects based on the underlying physics that rules these devices. The ΔN mechanism due to trapping/detrapping together with an intense Coulomb scattering effect dominates the 1/f noise from the medium to the strong accumulation region while Δμ has also been demonstrated to modestly contribute in the subthreshold region. ΔR can also be significant in a very high carrier density. The VS induced reduction of 1/f noise measurements at high electric fields was also remarkably captured by the model. The physical validity of the model can also assist in extracting credible conclusions when conducting comparisons between experimental data from devices with different materials or dielectrics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Physics-Based Compact Modeling for the Drain Current Variability in Single-Layer Graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Garcia Cortadella, Ramon|||0000-0002-1506-6534
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Garrido, Jose|||0000-0001-5621-1067
  • Jiménez, David|||0000-0002-8148-198X
For the growth of emerging graphene field effect transistor (GFET) technologies, a thorough characterization of on-wafer variability is required. Here, we report for the first time a physics-based compact model, which precisely describes the drain current (ID) fluctuations of monolayer GFETs. Physical mechanisms known to generate 1/f noise in transistors, such as carrier number and Coulomb scattering mobility fluctuations, are also revealed to cause (ID) variance. Such effects are considered in the model by being activated locally in the channel and the integration of their contributions from source to drain results in total variance. The proposed model is experimentally validated from a statistical population of three different-sized solution-gated (SG) GFETs from strong p- to strong n-type bias conditions. A series resistance (ID) variance model is also derived mainly contributing at high carrier densities.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A Scalable Compact Model for the Static Drain Current of Graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Txoperena, Oihana
  • Torres, Elias
  • Jiménez, David|||0000-0002-8148-198X
The main target of this article is to propose for the first time a physics-based continuous and symmetric compact model that accurately captures I-V experimental dependencies induced by geometrical scaling effects for graphene field-effect transistor (GFET) technologies. Such a scalable model is an indispensable ingredient for the boost of large-scale GFET applications, as it has been already proved in solid industry-based CMOS technologies. Dependencies of the physical model parameters on channel dimensions are thoroughly investigated, and semi-empirical expressions are derived, which precisely characterize such behaviors for an industry-based GFET technology, as well as for others developed in research laboratory. This work aims at the establishment of the first industry standard GFET compact model that can be integrated in circuit simulation tools and, hence, can contribute to the update of GFET technology from the research level to massive industry production.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Static and small-signal modeling of radiofrequency hexagonal boron nitride switches

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Jordan-Garcia, Omar
  • Ramirez-Garcia, Eloy|||0000-0002-2594-621X
  • Jiménez, David|||0000-0002-8148-198X
A first modeling approximation of the general performance of radiofrequency (RF) switches based on hexagonal boron nitride (hBN), a two-dimensional (2D) dielectric material is presented. The I-V characteristics intrinsic and extrinsic impedance parameters, the return loss, insertion loss and isolation of RF 2D switches fabricated with hBN are described here by a equivalent circuit models. Straightforward analytical expressions are obtained. In contrast to conventional switches, the unique RF performance of the hBN switch, at ON-state, i.e., a direct improvement with frequency of the insertion loss, is accurately described by considering a capacitor in the intrinsic part of the model. The latter is suggested to be related to storaged charge during the resistive switching mechanism. The highest mean relative error obtained between modeling and measurements of the return loss is of 7.6% with the approach presented here which overcomes the 42.5% of difference obtained with a previous model with an incomplete intrinsic device description.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Exploiting Ambipolarity in Graphene Field-Effect Transistors for Novel Designs on High-Frequency Analog Electronics

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Ramos Silva, Javier Noé|||0000-0002-7644-6215
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Pardo, Mari Carmen
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Ramirez-Garcia, Eloy|||0000-0002-2594-621X
  • Jiménez, David|||0000-0002-8148-198X
  • Marin, Enrique G.|||0000-0002-0302-3764
Exploiting ambipolar electrical conductivity based on graphene field-effect transistors has raised enormous interest for high-frequency (HF) analog electronics. Controlling the device polarity, by biasing the graphene transistor around the vertex of the V-shaped transfer curve, enables to redesign and highly simplify conventional analog circuits, and simultaneously to seek for multifunctionalities, especially in the HF domain. This study presents new insights for the design of different HF applications such as power amplifiers, mixers, frequency multipliers, phase shifters, and modulators that specifically leverage the inherent ambipolarity of graphene-based transistors.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

An Extraction Method for Mobility Degradation and Contact Resistance of Graphene Transistors

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Jiménez, David|||0000-0002-8148-198X
The intrinsic mobility degradation coefficient, contact resistance, and the transconductance parameter of graphene field-effect transistors (GFETs) are extracted for different technologies by considering a novel transport model embracing mobility degradation effects within the charge channel control description. By considering the mobility degradation-based model, a straightforward extraction methodology, not provided before, is enabled by applying the concept of the well-known Y -function to the I - V device characteristics. The method works regardless of the gate device architecture. An accurate description of experimental data of fabricated devices is achieved with the underlying transport equation by using the extracted parameters. An evaluation of the channel resistance, enabled by the extracted parameters here, has also been provided.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Investigating the Device Performance Variation of a Buried Locally Gated Al/Al2O3 Graphene Field-Effect Transistor Process

  • Huang, Tzu-Jung
  • Ankolekar, Adheesh
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Puchades, Ivan|||0000-0002-2242-5937
In this study, a process is developed for the fabrication of buried top-gated graphene transistors with AlO as a gate dielectric, yielding devices that can be suitable for not only flexible electronics but also laser-induced graphene (LIG)-based technology implementations. A new processing option is presented with the use of tetraethyl-orthosilicate (TEOS) as an etch stop for contact via etching of AlO. Buried locally gated Al/AlO graphene field-effect transistors (GFETs) are fabricated with Dirac points as low as 4 V, with a metal-to-graphene contact resistance as low as ∼1.7 kΩ·µm, and an average hole mobility of 457.97 cm/V·s with a non-uniformity of 93%. Large device variation and non-uniformity in electrical performance are not uncommon for graphene-based devices, as process-induced defects play a major role in such variation. AFM, SEM, Raman spectroscopy, and model fitting indicated that the rough Al/AlO surface was the main factor for the observed device variation. AFM analysis indicated a graphene surface roughness Ra of 16.19 nm on top of the buried Al/AlO gate in contrast to a Ra of 4.06 nm over AlO/SiO. The results presented indicate the need to reduce device variability and non-uniformity by improving transfer methods, as well as the use of smoother surfaces and compatible materials. The presented analyses provide a framework with which other researchers can analyze and correlate device variation and non-uniformities while methods to reduce variability are investigated.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Straightforward bias- and frequency-dependent small-signal model extraction for single-layer graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Wei, Wei
  • Pallecchi, Emiliano|||0000-0002-8682-7935
  • Happy, Henri|||0000-0003-2065-8080
  • Jiménez, David|||0000-0002-8148-198X
We propose an explicit small-signal graphene field-effect transistor (GFET) parameter extraction procedure based on a charge-based quasi-static model. The dependence of the small-signal parameters on both gate voltage and frequency is precisely validated by high-frequency (up to 18 GHz) on-wafer measurements from a 300 nm device. These parameters are studied simultaneously, in contrast to other works which focus exclusively on few. Efficient procedures have been applied to GFETs for the first time to remove contact and gate resistances from the Y-parameters. The use of these methods yields straightforward equations for extracting the small-signal model parameters, which is extremely useful for radio-frequency circuit design. Furthermore, we show for the first time experimental validation vs. both gate voltage and frequency of the intrinsic GFET non-reciprocal capacitance model. Accurate models are also presented for the gate voltage-dependence of the measured unity-gain and maximum oscillation frequencies as well as of the current and power gains.