Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 78
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

2D Van der Waals Heterostructures for Chemical Sensing

  • Hou, Huilei
  • Anichini, Cosimo
  • Samorì, Paolo
  • Criado, Alejandro
  • Prato, Maurizio
[Abstract] During the last 15 years, 2D materials have revolutionized the field of materials science. Moreover, because of their highest surface-to-volume ratio and properties extremely susceptible to their interaction with the local environment they became powerful active components for the development the high-performance chemical sensors. By combining different 2D materials to form van der Waals heterostructures (VDWHs) it is possible to overcome the drawback of individual materials (such as inertness and zero-bandgap of pristine graphene and less environmental stability of transition metal dichalcogenides). Meanwhile, VDWHs possess unprecedented and fascinating properties arising from the intimate interaction between the components, which can yield superior sensitivities, higher selectivity, and stability when employed to detect gases, biomolecules, and other organic/inorganic molecules. Herein, the latest developments and advances in the field of chemical sensors based on VDWH of 2D materials, with specific insight into the sensing mechanisms, are reviewed and future directions, challenges, and opportunities for the development of the next generation of (bio)chemical sensors with potential impact in environmental sciences and biomedical applications, and more specifically in (bio)chemical defense, industrial safety, food, and environmental surveillance, and medical (early) diagnostics, are discussed., The authors gratefully acknowledge the financial support from the University of Trieste, INSTM, the Italian Ministry of Education MIUR (Cofin Prot. 2017PBXPN4) and the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (Grant No. MDM-2017-0720). The authors acknowledge financial support from the EC through the Graphene Flagship Core 3 project (GA-881603) and the ERC project SUPRA2DMAT (GA-833707), the Interdisciplinary Thematic Institute SysChem via the IdEx Unistra (ANR-10-IDEX-0002) within the program Investissement d’Avenir program, the International Center for Frontier Research in Chemistry and the Institut Universitaire de France (IUF). M.P. is AXA Chair of Bionanotechnology. A.C. thanks MINECO and Xunta de Galicia for his research grants (Ramon y Cajal No. RYC2020-030183-I, and Atracción de Talento No. ED431H 2020/17, respectively). H.-L.H. thanks MINECO for his research grant (Juan de la Cierva Incorporacion/No. IJC-2018-037396-I). Open access funding provided by Universita degli Studi di Trieste within the CRUI-CARE Agreement., Xunta de Galicia; ED431H 2020/17
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Bidirectional Modulation of Neuronal Cells Electrical and Mechanical Properties Through Pristine and Functionalized Graphene Substrates

  • Zummo, Francesca
  • Esposito, Pietro
  • Hou, Huilei
  • Wetzl, Cecilia
  • Rius, Gemma
  • Tkatchenko, Raphaela
  • Guimerà, Anton
  • Godignon, Philippe
  • Prato, Maurizio
  • Prats Alfonso, Elisabet
  • Criado, Alejandro
  • Scaini, Denis
[Abstract] In recent years, the quest for surface modifications to promote neuronal cell interfacing and modulation has risen. This course is justified by the requirements of emerging technological and medical approaches attempting to effectively interact with central nervous system cells, as in the case of brain-machine interfaces or neuroprosthetic. In that regard, the remarkable cytocompatibility and ease of chemical functionalization characterizing surface-immobilized graphene-based nanomaterials (GBNs) make them increasingly appealing for these purposes. Here, we compared the (morpho)mechanical and functional adaptation of rat primary hippocampal neurons when interfaced with surfaces covered with pristine single-layer graphene (pSLG) and phenylacetic acid-functionalized single-layer graphene (fSLG). Our results confirmed the intrinsic ability of glass-supported single-layer graphene to boost neuronal activity highlighting, conversely, the downturn inducible by the surface insertion of phenylacetic acid moieties. fSLG-interfaced neurons showed a significant reduction in spontaneous postsynaptic currents (PSCs), coupled to reduced cell stiffness and altered focal adhesion organization compared to control samples. Overall, we have here demonstrated that graphene substrates, both pristine and functionalized, could be alternatively used to intrinsically promote or depress neuronal activity in primary hippocampal cultures., This work was funded by the European Union’s Horizon 2020 Research and Innovation Program under the Grant Agreements 785219 and 881603 of the Graphene Flagship. DS acknowledges the support of the European Union’s Horizon 2020 Research and Innovation Program under the Marie Skłodowska-Curie grant agreement no. 838902. MP as the recipient of the AXA Bionanotechnology Chair, is grateful to the AXA Research Fund for financial support. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency-grant no. MDM-2017- 0720. AC thanks Xunta de Galicia for his research grant Atracción de Talento (no. ED431H 2020/17). GR acknowledges funding from RYC-2016-21412. HH acknowledges funding from Juan de la Cierva – Incorporación no. IJC-2018-037396-I, Xunta de Galicia; ED431H 2020/17
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Bioresponsive, Electroactive, and Inkjet-Printable Graphene-Based Inks

  • Silvestri, Alessandro
  • Criado, Alejandro
  • Poletti, Fabrizio
  • Wang, Faxing
  • Fanjul Bolado, Pablo
  • González García, María Begoña
  • García-Astrain, Clara
  • Liz-Marzán, Luis
  • Feng, Xinliang
  • Zanardi, Chiara
  • Prato, Maurizio
[Abstract]: With the advent of flexible electronics, the old fashioned and conventional solid-state technology will be replaced by conductive inks combined with low-cost printing techniques. Graphene is an ideal candidate to produce conductive inks, due to its excellent conductivity and zero bandgap. The possibility to chemically modify graphene with active molecules opens up the field of responsive conductive inks. Herein, a bioresponsive, electroactive, and inkjet-printable graphene ink is presented. The ink is based on graphene chemically modified with selected enzymes and an electrochemical mediator, to transduce the products of the enzymatic reaction into an electron flow, proportional to the analyte concentration. A water-based formulation is engineered to be respectful with the enzymatic activity while matching the stringent requirements of inkjet printing. The efficient electrochemical performance of the ink, as well as a proof-of-concept application in biosensing, is demonstrated. The versatility of the system is demonstrated by modifying graphene with various oxidoreductases, obtaining inks with selectivity toward glucose, lactate, methanol, and ethanol., This work was supported by the European Commission (Spearhead project Chemsens, Graphene Flagship under Grant Agreement No. 696656). A.S., A.C., and C.G.-A. thank MINECO for their research grant (Juan de la Cierva Formacion/no. FJC2018-036777-I, Juan de la Cierva Incorporación/no. IJCI-2016-31113, and Juan de la Cierva Incorporación/no. IJC2019-040827-I, respectively). M.P., as the recipient of the AXA Bionanotechnology Chair, is grateful to the AXA Research Fund for financial support. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency grant no. MDM-2017-0720.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Mass Spectrometry of Carbohydrate-Protein Interactions on a Glycan Array Conjugated to CVD Graphene Surfaces

  • Merino, Juan P.
  • Serna, Sonia
  • Criado, Alejandro
  • Centeno, Alba
  • Napal, Ilargi
  • Calvo, Javier
  • Zurutuza, Amaia
  • Reichardt, Niels-Christian
  • Prato, Maurizio
[Abstract]: Mass spectrometry (MS) is a valuable tool for functional genomic, proteomic, and glycomic studies. In particular, the combination of MS with microarrays is a powerful technique for analyzing the activity of carbohydrate processing enzymes and for the identification of car-bohydrate-binding proteins (lectins) in complex matrices. On the other hand, graphene exhi-bits high desorption/ionization efficiency, good conductivity and optical transparency, specifi-cations of a high-performance component for matrix-assisted laser desorption/ionization (MALDI) platforms. Besides, the chemical functionalization of graphene increases the adsor-ption capability of functional biomolecules (e.g. receptors), resulting in very stable interfaces. Taking advantage of the properties of graphene, we developed several modified chemical vapor deposited graphene (CVDG)-based glycan arrays on different substrates including ITO and bare glass, as a potential sensing platform for carbohydrate-lectin interactions, which are involved in a plethora of biological processes. The glycan arrays were fully characterized by MALDI-MS analysis and, in some cases, optical microscopy., M Prato is the recipient of the AXA Chair (2016-2023). A Criado thanks MINECO to his research grant (Juan de la Cierva—Incorporación). This work was supported by the European Union’s Horizon 2020 research and innovation program under Grant Agreements 696656 and 785219 Graphene Flagship. Funding from the Spanish Ministry of Economy, Industry and Competitiveness (project CTQ2016-76721-R to M Prato and Grant CTQ2017-90039-R to N-C Reichardt) is acknowledged. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—Grant No. MDM-2017-0720.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

High-Yield Preparation of Exfoliated 1T-MoS2 with SERS Activity

  • Er, Engin
  • Hou, Huilei
  • Criado, Alejandro
  • Langer, Judith
  • Möller, Marco
  • Erk, Nevin
  • Liz-Marzán, Luis
  • Prato, Maurizio
[Abstract]: Molybdenum disulfide (MoS2), a promising two-dimensional transition-metal dichalcogenide, presents a challenge in the tuning of its optoelectronic and chemical properties. Herein, we demonstrate an efficient route to alter the crystalline structure of MoS2 by chemical exfoliation. Using NaK metal alloys, exfoliated and covalently functionalized MoS2 derivatives were obtained with a high metallic (1T) phase ratio, up to 94.5%. Consequently, exfoliated MoS2 showed a significant surface-enhanced Raman scat-tering activity toward rhodamine 6G (R6G) and crystal violet, with low detection limits. The versatility of this approach allows the covalent functionalization of MoS2 without relying on edge or basal-plane defects of the structure and preserving the high-ratio 1T phase., M.P. is the recipient of the AXA Chair (2016−2023). A.C. thanks MINECO for his researcher grant (Juan de la Cierva-Incorporación). E.E. is grateful for a fellowship from the Scientific and Technological Research Council of Turkey (TUBITAK). This work was supported by the Graphene Flagship Core 2 grant agreement no. 785219. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency-grant no. MDM-2017-0720.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Agarose-Based Fluorescent Waveguide with Embedded Silica Nanoparticle–Carbon Nanodot Hybrids for pH Sensing

  • Amato, Francesco
  • Soares, Marco C. P.
  • Cabral, Thiago Destri
  • Fujiwara, Eric
  • Cordeiro, Cristiano Monteiro de Barros
  • Criado, Alejandro
  • Prato, Maurizio
  • Bartoli, Julio Roberto
[Abstract] The fabrication of a biodegradable and fluorescent cylindrical waveguide with doped hybrid nanoparticles (silica–carbon nanodots) is reported. The fluorescent hybrids were obtained by coupling amino-functionalized fumed silica nanoparticles with the carboxylic acid surface groups of amorphous carbon nanodots obtained from the thermolysis of citric acid. The hybrid nanoparticles present diameters lower than 10 nm, maximum fluorescence at 465 nm, and excitation-wavelength-dependent behavior. They were occluded into an agarose matrix, providing a low-cost and easily scalable sensor capable of detecting pH variations with maximum sensitivity of 5.61 nm/(pH unit) when excited by a 403 nm UV light-emitting diode (LED)., The authors thank the São Paulo Research Foundation (FAPESP, Brazil) under Grant 2019/22554-4, the National Council for Scientific and Technological Development (CNPq,Brazil) (Finance Code −001), Espaço da Escrita-Pró-Reitoria de Pesquisa-UNICAMP for the language services provided and Faepex/Unicamp, M. Möller (CIC biomaGUNE-BRTA) for the FEG-TEM analysis, Professor S. Bosi, Dr. F. Arcudi, Dr. G. Filippini, Dr. M. Cacioppo (DSCF/UNITS), Dr. P. Bertoncin (DSV/UNITS), Profes-sor C. K. Suzuki (FEM/Unicamp), Professor M. Carreño, and Professor I. Pereyra (LME/EPUSP) for the technical support and for scientific discussions and insights, and Gildo S. Rodrigues (Unicamp) for the 3D printing of the molds. Professor Maurizio Pra-to is the AXA Chair for Bionanotechnology (2016−2023). This study was supported by the University of Trieste, INSTM, the Italian Ministry of Education, MIUR (cofin Prot. 2017PBXPN4), and the Spanish Ministry of Science, Innovation and Universities, MICIU (project PID2019-108523RB-I00). Part of this research was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency, Grant No. MDM-2017-0720., Brazil. São Paulo Research Foundation; 2019/22554-4
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Concise, Single-Step Synthesis of Sulfur-Enriched Graphene: Immobilization of Molecular Clusters and Battery Applications

  • Omachi, Haruka
  • Inoue, Tsukasa
  • Hatao, Shuya
  • Shinohara, Hisanori
  • Criado, Alejandro
  • Yoshikawa, Hirofumi
  • Syrgiannis, Zois
  • Prato, Maurizio
[Abstract]: The concise synthesis of sulfur-enriched Graphene for battery applications is reported. The direct treatment of graphene oxide (GO) with the commercially available Lawesson’s reagent produced sulfur-enriched-reduced GO (S-rGO). Various techniques, such as X-ray photoelectron spectroscopy (XPS), confirmed the occurrence of both sulfur functionalization and GO reduction. Also fabricated was a nanohybrid material by using S-rGO with polyoxometalate (POM) as a cathode-active material for a rechargeable battery. Transmission electron microscopy (TEM) revealed that POM clusters were individually immobilized on the S-rGO surface. This battery, based on a POM/S-rGO complex, exhibited greater cycling stability for the charge-discharge process tan a battery with nanohybrid materials positioned between the POM and nonenriched rGO. These results demonstrate that the use of sulfur-containing groups on a graphene surface can be extended to applications such as the catalysis of electrochemical reactions and electrodes in other battery systems., This work was financially supported by MEXT/JSPS KAKENHI (15K21073, 19K15539 to H.O., 16H06350, 16H02248 to H.S. and 18H04528, 17H03048, 18H04491 to H.Y.) and in part by research grants from Nippon Shokubai Co. Ltd., Kondo Zaidan, JGC-S Scholarship Foundation. We acknowledged financial support from the European Union’s Horizon2020 research and innovation program under Grant Agreements 696656 and 785219 Graphene Flagship. This work was also supported by the Spanish Ministry of Economy and Competitiveness MINECO (projects IJCI-2016-31113), by the University of Trieste, and Consorzio Interuniversitario Nazionale per la Scienza e Tecnologia dei Materiali (INSTM). MP, as the recipient of the AXA Chair, is grateful to the AXA Research Fund for financial support. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—Grant No. MDM-2017-0720. We also thank Prof. Yuta Nishina (Okayama University) for providing graphene oxide samples., MEXT/JSPS KAKENHI; 15K21073, MEXT/JSPS KAKENHI; 19K15539, MEXT/JSPS KAKENHI; 16H06350, MEXT/JSPS KAKENHI; 16H02248, MEXT/JSPS KAKENHI; 18H04528, MEXT/JSPS KAKENHI; 17H03048, MEXT/JSPS KAKENHI; 18H04491
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

New Insights into the Exploitation of BODIPY Derivatives as Organic Photocatalysts

  • Da Lama Vázquez, Ana
  • Bartolomei, Beatrice
  • Rosso, Cristian
  • Filippini, Giacomo
  • Martínez, M. Montserrat
  • Sarandeses, Luis A.
  • Prato, Maurizio
[Abstract] Boron-dipyrromethene complexes (BODIPYs) are attracting a growing interest for their notable photophysical properties. Specifically, their application in organic photocatalysis is receiving particular attention thanks to their ability to undergo both electron and energy transfer processes, thus acting as promising photoredox catalysts and photosensitizers. Although the number of examples employing these organic dyes is constantly increasing, there are not so many studies that correlate their chemical composition to their photocatalytic activity. In this work, a rationally designed structure-activity relationship study was performed by selecting a synthetically relevant atom transfer radical addition (ATRA) reaction as a benchmark. We demonstrated how the presence of heavy atoms in the chromophore's core turned out to be essential for achieving high reactivity levels. On the contrary, electron-withdrawing groups in position 8 (meso) undermined the catalytic performances, in agreement with the proposed reaction mechanism., M.P. is the AXA Chair for Bionanotechnology (2016–2023). This work was supported by the University of Trieste, INSTM, and the Italian Ministry of Education MIUR (cofin Prot. 2017PBXPN4). Part of this work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency Grant No. MDM-2017-0720. M.M.M. and L.A.S. kindly acknowledge Spanish State Research Agency-Ministry of Science, Innovation and Universities (Grant No. PGC2018-097792-B-I00). A.D.L. kindly acknowledges Xunta de Galicia for a predoctoral fellowship (EDA 481A-2020/017). G.F. kindly acknowledges FRA2022 funded by the University of Trieste and Microgrants2021 founded by Region FVG (LR 2/2011, ART. 4). Open Access funding provided by Università degli Studi di Trieste within the CRUI-CARE Agreement, Italia. Ministero dell'Istruzione e del Merito; 2017PBXPN4, Xunta de Galicia; EDA 481A-2020/017
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Metal-Free Photocatalysis: Two-Dimensional Nanomaterial Connection toward Advanced Organic Synthesis

  • Rosso, Cristian
  • Filippini, Giacomo
  • Criado, Alejandro
  • Melchionna, Michele
  • Fornasiero, Paolo
  • Prato, Maurizio
[Abstract] Two-dimensional (2D) nanostructures are a frontier in materials chemistry as a result of their extraordinary properties. Metal-free 2D nanomaterials possess extra appeal due to their improved cost-effectiveness and lower toxicity with respect to many inorganic structures. The outstanding electronic characteristics of some metal-free 2D semiconductors have projected them into the world of organic synthesis, where they can function as high-performance photocatalysts to drive the sustainable synthesis of high-value organic molecules. Recent reports on this topic have inspired a stream of research and opened up a theme that we believe will become one of the most dominant trends in the forthcoming years., M.P. is the AXA Chair for Bionanotechnology (2016−2023). This work was supported by the University of Trieste, INSTM, and the Italian Ministry of Education MIUR (cofin Prot. 2017PBXPN4). Part of this work was performed under the Maria de Maeztu Units of Excellence Program from theSpanish State Research Agency Grant No. MDM-2017-0720.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Metal Nanoparticles/MoS2 Surface-Enhanced Raman Scattering- Based Sandwich Immunoassay for α‑Fetoprotein Detection

  • Er, Engin
  • Sánchez Iglesias, Ana
  • Silvestri, Alessandro
  • Arnaiz, Blanca
  • Liz-Marzán, Luis
  • Prato, Maurizio
  • Criado, Alejandro
[Abstract]: The detection of cancer biomarkers at an early stage of tumor development is vital for effective diagnosis and treatment of cancer. Current diagnostic tools can often detect cancer only when the biomarker levels are already too high, so that the tumors have spread and treatments are less effective. It is urgent therefore to develop highly sensitive assays for the detection of such biomarkers at the lowest possible concentration. In this context, we developed a sandwich immunoassay based on surface-enhanced Raman scattering (SERS) for the ultrasensitive detection of α-fetoprotein (AFP), which is typically present in human serum as a biomarker indicative of early stages of hepatocellular carcinoma. In the immunoassay design, molybdenum disulfide (MoS2) modified with a monoclonal antibody was used as a capture probe for AFP. A secondary antibody linked to an SERS-encoded nanoparticle was employed as the Raman signal reporter, that is, the transducer for AFP detection. The sandwich immunocomplex “capture probe/target/SERS tag” was deposited on a silicon wafer and decorated with silver-coated gold nanocubes to increase the density of “hot spots” on the surface of the immunosensor. The developed SERS immunosensor exhibits a wide linear detection range (1 pg mL–1 to 10 ng mL–1) with a limit of detection as low as 0.03 pg mL–1 toward AFP with good reproducibility (RSD < 6%) and stability. These parameters demonstrate that the proposed immunosensor has the potential to be used as an analytical platform for the detection of early-stage cancer biomarkers in clinical applications., E.E. is grateful for a fellowship from the Scientific and Technological Research Council of Turkey (TUBITAK). A.C. and A.S. thank MINECO for their research grant (Juan de la Cierva-Incorporación/no. IJCI-2016-31113, Juan de la Cierva-Formacion/no. FJC2018-036777-I, respectively). We thank Dr. Judith Langer for support in the interpretation of SERS results. This work was supported by the European Union’s Horizon 2020 research and innovation program under Grant Agreements 785219 and 881603 Graphene Flagship. L.M.L.-M. acknowledges funding from the European Research Council (ERC-AdG-2017# 787510). M.P., as the recipient of the AXA Bionanotechnology Chair, is grateful to the AXA Research Fund for financial support. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency-grant no. MDM-2017- 0720.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Ethanol Solvation of Polymer Residues in Graphene Solution-Gated Field Effect Transistors

  • Merino, Juan P.
  • Vázquez Sulleiro, Manuel
  • Criado, Alejandro
  • Prato, Maurizio
  • Prats Alfonso, Elisabet
[Abstract] The persistence of photoresist residues from microfabrication procedures causes significant obstacles in the technological advancement of graphene-based electronic devices. These residues induce undesired chemical doping effects, diminish carrier mobility, and deteriorate the signal-to-noise ratio, making them critical in certain contexts, including sensing and electrical recording applications. In graphene solution-gated field-effect transistors (gSGFETs), the presence of polymer contaminants makes it difficult to perform precise electrical measurements, introducing response variability and calibration challenges. Given the absence of viable short to midterm alternatives to polymer-intensive microfabrication techniques, a postpatterning treatment involving THF and ethanol solvents was evaluated, with ethanol being the most effective, environmentally sustainable, and safe method for residue removal. Employing a comprehensive analysis with XPS, AFM, and Raman spectroscopy, together with electrical characterization, we investigated the influence of residual polymers on graphene surface properties and transistor functionality. Ethanol treatment exhibited a pronounced enhancement in gSGFET performance, as evidenced by a shift in the charge neutrality point and reduced dispersion. This systematic cleaning methodology holds the potential to improve the reproducibility and precision in the manufacturing of graphene devices. Particularly, by using ethanol for residue removal, we align our methodology with the principles of green chemistry, minimizing environmental impact while advancing diverse graphene technology applications., This work has made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MICINN and the ICTS NANBIOSIS, more specifically by the Micro-NanoTechnology Unit U8 of the CIBER-BBN. This research was funded by the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 881603 (GrapheneCore3) and No. 785219 (GrapheneCore2). We also acknowledge funding from the Generalitat de Catalunya (2021SGR00495 and 2021SGR001534). G.R. thanks the Ayuda RYC-2016-21412, and E.dC thanks the Ayuda RYC2019-027879-I founded by MCIU/AEI/10.13039/501100011033 and by El FSE invierte en tu futuro. E.M.-C. acknowledges Ayuda FJC2021-046601-I financiada por MCIU/AEI/10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR. This research was funded by the Spanish Ministerio de Ciencia e Innovación (PID2021-126117NA-I00, PID2020-113663RB-I00, PLEC2022-009232) founded by MCIU/AEI/10.13039/501100011033) and by “ERDF A way of making Europe”, also this work was funded by CIBER-BBN (CB06/01/0049). In addition, this work has been funded by PLEC2022-009232 funded by MCIU/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. The authors acknowledge the financial support provided by CIBER-BBN and the Instituto de Salud Carlos III with assistance from the European Regional Development. M.V.S. thanks Xunta de Galicia (ED481B-2023-126). A.C. acknowledges financial support by Grant ED431H 2020/17 funded by Xunta de Galicia, and by Grant RYC2020-030183-I funded by MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future”. Part of this work was performed under the Maria de Maeztu Units of Excellence Program grant MDM-2017-0720 funded by MCIN/AEI/10.13039/501100011033 and supported by the Severo Ochoa Centres of Excellence programme [SEV-2017-0706] and is currently supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, both funded by MCIN and MCIU/AEI/10.13039.501100011033. M.P. as recipient of the AXA Chair is grateful to AXA Chair in Nanobiotechnology supported by the AXA Research Fund., Generalitat de Catalunya; 2021SGR00495, Generalitat de Catalunya; 2021SGR001534, Xunta de Galicia; ED481B-2023-126, Xunta de Galicia; ED431H 2020/17
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Light-driven, heterogeneous organocatalysts for C–C bond formation toward valuable perfluoroalkylated intermediates

  • Filippini, Giacomo
  • Longobardo, Francesco
  • Forster, Luke
  • Criado, Alejandro
  • Di Carmine, Graziano
  • Nasi, Lucia
  • D'Agostino, Carmine
  • Melchionna, Michele
  • Fornasiero, Paolo
  • Prato, Maurizio
The favorable exploitation of carbon nitride (CN) materials in photocatalysis for organic synthesis requires the appropriate fine-tuning of the CN structure. Here, we present a deep investigation of the structure/activity relationship of CN in the photocatalytic perfluoroalkylation of organic compounds. Four types of CN bearing subtle structural differences were studied via conventional characterization techniques and innovative nuclear magnetic resonance (NMR) experiments, correlating the different structures with the fundamental mechanistic nexus and especially highlighting the importance of the halogen bond strength between the reagent and the catalyst surface. The optimum catalyst exhibited an excellent performance, with a very wide reaction scope, and could prominently trigger the model reaction using natural sunlight. The work lays a platform for establishing a new approach in the development of heterogeneous photocatalysts for organic synthesis related to medical, agricultural, and material chemistry., This work was supported by the University of Trieste, INSTM, the Italian Ministry of Education MIUR (cofin Prot. 2017PBXPN4), and the European Commission (DECADE). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency grant no.MDM-2017-0720. V. Dal Santo is acknowledged for the DRS measurements. G. Adami and M. Crosera are acknowledged for the ICP-OES analysis. C.D. thanks the EPSRC New Investigator Award (EP/S019138/1) for supporting his research activities., Engineering and Physical Sciences Research Council New Investigator Award; EP/S019138/1
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Electrochemically Controlled Cleavage of Imine Bonds on a Graphene Platform: Towards New Electro-Responsive Hybrids for Drug Release

  • Hou, Huilei
  • Cardo, Lucia
  • Mancino, Donato
  • Arnaiz, Blanca
  • Criado, Alejandro
  • Prato, Maurizio
[Abstract] Graphene-based materials are particularly suitable platforms for the development of new systems able to release drugs upon the application of controlled electrochemical stimuli. Herein, we report a new electro-responsive graphene carrier functionalised with aldehydes (as drug models) through imine-based linkers. We explore a new type of drug loading/release combination based on the formation of a covalent bond and its cleavage upon electrolysis. The new graphene–drug model hybrid is stable under physiological conditions and displays a fast drug release upon the application of low voltages., M. Prato is the recipient of the AXA Chair (2016–2023). A. Criado, H.-L. Hou and D. Mancino thank MINECO for their research grants (Juan de la Cierva – Incorporación No. IJCI-2016-31113 and IJC-2018-037396 for A. Criado and H.-L. Hou, respectively; and FPI No. BES-2017-081563 for D. Mancino). This work was supported by the Graphene Flagship Core 2 and Core 3 grant agreement (No. 785219 and 881603, respectively) and EU H2020-MSCA-RISE-2016 (No. 734381). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency – Grant No. MDM-2017-0720.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Graphene, Other Carbon Nanomaterials and the Immune System: Toward Nanoimmunity-By-Design

  • Gazzi, Arianna
  • Criado, Alejandro
  • Delogu, Lucia Gemma
© 2020 The Author(s). Published by IOP Publishing Ltd. Original content from this work may be used under the terms of the Creative Commons Attribution 4.0 license (http://creativecommons.org/licenses/by/4.0/). Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI., [Abstract]: Carbon-based materials (CBMs), such as graphene, nanodiamonds, carbon fibers, and carbon dots, have attracted a great deal scientific attention due to their potential as biomedical tools. Following exposure, particularly intravenous injection, these nanomaterials can be recognized by immune cells. Such interactions could be modulated by the different physicochemical properties of the materials (e.g. structure, size, and chemical functions), by either stimulating or suppressing the immune response. However, a harmonized cutting-edge approach for the classification of these materials based not only on their physicochemical parameters but also their immune properties has been missing. The European Commission-funded G-IMMUNOMICS and CARBO-IMmap projects aimed to fill this gap, developing a functional pipeline for the qualitative and quantitative immune characterization of graphene, graphene-related materials (GRMs), and other CBMs. The goal was to open breakthrough perspectives for the definition of the immune profiles of these materials. Here, we summarize our methodological approach, key results, and the necessary multidisciplinary expertise ranging across various fields, from material chemistry to engineering, immunology, toxicology, and systems biology. G-IMMUNOMICS, as a partnering project of the Graphene Flagship, the largest scientific research initiative on graphene worldwide, also complemented the studies performed in the Flagship on health and environmental impact of GRMs. Finally, we present the nanoimmunity-by-design concept, developed within the projects, which can be readily applied to other 2D materials. Overall, the G-IMMUNOMICS and CARBO-IMmap projects have provided new insights on the immune impact of GRMs and CBMs, thus laying the foundation for their safe use and future translation in medicine., We gratefully acknowledge financial support from FLAG-ERA JTC Graphene 2015 (G-IMMUNOMICS project), awarded to L G D, A B, M P, A Y, K K, and B S; and Euro-pean Union's Horizon 2020 research and innovation programme under the Marie Sklo-dowska-Curie Grant Agreement No. 734381 (CARBO-IMmap), awarded to L G D, A B, M P, D B, X F, Y M, C C, G C, and M P. The work in San Sebastián was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Re-search Agency – Grant No. MDM-2017-0720.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Water-Mediated ElectroHydrogenation of CO2 at Near-Equilibrium Potential by Carbon Nanotubes/Cerium Dioxide Nanohybrids

  • Melchionna, Michele
  • Criado, Alejandro
  • Bonchio, Marcella
  • Fornasiero, Paolo
  • Paolucci, Francesco
  • Prato, Maurizio
[Abstract]: The combination of multiwalled carbon nanotubes (MWCNTs) with undoped CeO2 na-noparticles (NPs) is effective for the direct electrocatalytic reduction of CO2 to formic acid (FA) at acidic pH (0.1 M HNO3), at overpotential as low as η = −0.02 V (vs RHE) with Faradic efficiency (FE) up to 65%. Exsitu and operando evidence identifies nons-toichiometric Ce4+/3+O2–x reduced sites as essential for the selective CO2 reduction reac-tion (CO2RR). The MWCNT-mediated electrochemical reduction of the CeO2 NPs of-fers a definite advantage with respect to the generally adopted thermochemical cycles (800–1500 °C) or deep hydrogenation pretreatments, thus presenting an interesting perspective for the engineering of CeO2 electrocatalysts., This work was supported by the Italian Ministero dell’Istruzione, Universitàe Ricerca (PRIN prot. 2017PBXPN4), the H2020 - RIA-CE-NMBP-25 Program (Grant No. 862030), and Universities of Bologna and Trieste, INSTM; Dr. Matteo Crosera (University of Trieste) is acknowledged for the ICPOES analysis. M.P., as the recipient of the AXA Chair, is grateful to the AXA Research Fund for financial support. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (Grant No. MDM-2017-0720).
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Single-Step Functionalization Strategy of Graphene Microtransistor Array with Chemically Modified Aptamers for Biosensing Applications

  • Brosel, Sergi
  • Rius, Gemma
  • Aviñó, Ana
  • Nako, Nakatsuka
  • Illa, Xavi
  • Corro, Elena del
  • Delgà-Fernández, Marta
  • Criado, Alejandro
  • Guimerà, Anton
  • Prats Alfonso, Elisabet
[Abstract]: Graphene solution-gated field-effect transistors (gSGFETs) offer high potential for chemical and biochemical sensing applications. Among the current trends to improve this technology, the functionalization processes are gaining relevance for its crucial impact on biosensing performance. Previous efforts are focused on simplifying the attachment procedure from standard multi-step to single-step strategies, but they still suffer from overreaction, and impurity issues and are limited to a particular ligand. Herein, a novel strategy for single-step immobilization of chemically modified aptamers with fluorenylmethyl and acridine moieties, based on a straightforward synthetic route to overcome the aforementioned limitations is presented. This approach is benchmarked versus a standard multi-step strategy using thrombin as detection model. In order to assess the reliability of the functionalization strategies 48-gSGFETs arrays are employed to acquire large datasets with multiple replicas. Graphene surface characterization demonstrates robust and higher efficiency in the chemical coupling of the aptamers with the single-step strategy, while the electrical response evaluation validates the sensing capability, allowing to implement different alternatives for data analysis and reduce the sensing variability. In this work, a new tool capable of overcome the functionalization challenges of graphene surfaces is provided, paving the way toward the standardization of gSGFETs for biosensing purposes., This work has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 881603 (GrapheneCore3) and no. 785219 (GrapheneCore2). M. P. is AXA Professor and is supported by the European Research Council (ERC-AdG-2019, no. 885323), the Agencia Estatal de Investigación-AEI (“Proyectos I+D+i 2019-Modalidad Retos Investigación”, no. PID2019-108523RB-I00), by grant PRE2020-095099 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future.” Part of this work has made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MICINN and the ICTS NANBIOSIS, more specifically by the Micro-NanoTechnology Unit U8 of the CIBER-BBN. This project was also funded by the Generalitat de Catalunya (2021SGR00495), by the Spanish Ministerio de Ciencia e Innovación (PID2021-126117NA-I00), by “ERDF A way of making Europe”, and by CIBER-BBN (CB06/01/0049). X. I., R. V., A. G. and E. P.-A. thank the financial support provided by CIBER-BBN and the Instituto de Salud Carlos III with assistance from the European Regional Development. A. C. acknowledges financial support by Grant ED431H 2020/17 funded by Xunta de Galicia, and by Grant RYC2020-030183-I funded by MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future”., Generalitat de Catalunya; 2021SGR00495
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solvent-Assisted Self-Assembly of Gold Nanorods into Hierarchically Organized Plasmonic Mesostructures

  • Hanske, Christoph
  • Hill, Eric H.
  • Vila Liarte, David
  • González-Rubio, Guillermo
  • Matricardi, Cristiano
  • Mihi, Agustín
  • Liz-Marzán, Luis Manuel
Plasmonic supercrystals and periodically structured arrays comprise a class of materials with unique optical properties that result from the interplay of plasmon resonances, as well as near and far field coupling. Controlled synthesis of such hierarchical structures remains a fundamental challenge, as it demands strict control over the assembly morphology, array size, lateral spacing, and macroscale homogeneity. Current fabrication approaches involve complicated multi-step procedures lacking scalability and reproducibility, which has hindered the practical application of plasmonic supercrystal arrays. Herein, these challenges are addressed by adding an organic solvent to achieve kinetic control over the template-assisted colloidal assembly of nanoparticles from aqueous dispersion. This method yields highly regular periodic arrays, with feature sizes ranging from less than 200 nm up to tens of microns. A combined experimental/computational approach reveals that the underlying mechanism is a combination of the removal of interfacial surfactant micelles from the particle interface and altered capillary flows. Assessing the efficacy of such square arrays for surface-enhanced Raman scattering spectroscopy, we find that a decrease of the lattice periodicity from 750 nm down to 400 nm boosts the signal by more than an order of magnitude, thereby enabling sensitive detection of analytes, such as the bacterial quorum sensing molecule pyocyanin, even in complex biological media., This work has been funded by the Spanish MINECO (Grant MAT2017- 86659-R). C.H. acknowledges the Alexander von Humboldt Foundation for funding in the framework of a Feodor Lynen fellowship. E.H.H. acknowledges receipt of a Juan de la Ciervafellowship (FJCI-2014-22598). A.M. is grateful to the funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 637116, ENLIGHTMENT) and funding by the Spanish Ministerio de Economía, Industria y Competitividad (MINECO) (Grant SEV-2015-0496 and MAT2016-79053-P. We further thank Mathias Charconnet for fruitful discussions and Vished Kumar for TEM imaging. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency – Grant No. MDM-2017-0720., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cu-doped extremely small iron oxide nanoparticles with large longitudinal relaxivity: One-pot synthesis and in vivo targeted molecular imaging

  • Fernández-Barahona, Irene
  • Gutiérrez, Lucía
  • Veintemillas-Verdaguer, S.
  • Pellico, Juan
  • Morales, María Del Puerto
  • Catala, Mauro
  • Pozo, Miguel A. del
  • Ruiz-Cabello, Jesús
  • Herranz, Fernando
Synthesizing iron oxide nanoparticles for positive contrast in magnetic resonance imaging is the most promising approach to bring this nanomaterial back to the clinical field. The success of this approach depends on several aspects: the longitudinal relaxivity values, the complexity of the synthetic protocol, and the reproducibility of the synthesis. Here, we show our latest results on this goal. We have studied the effect of Cu doping on the physicochemical, magnetic, and relaxometric properties of iron oxide nanoparticles designed to provide positive contrast in magnetic resonance imaging. We have used a one-step, 10 min synthesis to produce nanoparticles with excellent colloidal stability. We have synthesized three different Cu-doped iron oxide nanoparticles showing modest to very large longitudinal relaxivity values. Finally, we have demonstrated the in vivo use of these kinds of nanoparticles both in angiography and targeted molecular imaging. ©, This study was supported by grants from the Spanish Ministry for Economy and Competitiveness (MEyC) (SAF2016-79593-P, MAT2017-88148-R, and SAF2017-84494-C2-R), Comunidad de Madrid (S2017/BMD-3875), and Instituto de Salud Carlos III (DTS16/00059). L.G. received financial support from the Ramońy Cajal subprogram (RYC-2014-15512). J.R.-C. acknowledges funding from the Programa Red Guipuzcoana de Ciencia, Tecnología e Información (2018-CIEN-000058-01). I.F.-B. thanks Comunidad de Madrid (B2017/BMD-3875). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (Grant No. MDM-2017-0720), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Iron Oxide Nanoparticles: An Alternative for Positive Contrast in Magnetic Resonance Imaging

  • Fernández-Barahona, Irene
  • Muñoz-Hernando, María
  • Ruiz-Cabello, Jesús
  • Herranz, Fernando
  • Pellico, Juan
© 2020 by the authors., Iron oxide nanoparticles have been extensively utilised as negative (T2) contrast agents in magnetic resonance imaging. In the past few years, researchers have also exploited their application as positive (T1) contrast agents to overcome the limitation of traditional Gd3+ contrast agents. To provide T1 contrast, these particles must present certain physicochemical properties with control over the size, morphology and surface of the particles. In this review, we summarise the reported T1 iron oxide nanoparticles and critically revise their properties, synthetic protocols and application, not only in MRI but also in multimodal imaging. In addition, we briefly summarise the most important nanoparticulate Gd and Mn agents to evaluate whether T1 iron oxide nanoparticles can reach Gd/Mn contrast capabilities, F.H. was funded through the Spanish Ministry for Economy and Competitiveness (MEyC), grant number [SAF2016-79593-P] and the Ministry of Science, grant number [RED2018-102469-T]. J.R-C. was funded through the Spanish Ministry for Economy and Competitiveness (MEyC), grant number [SAF2017-84494-C2-R], and the Gobierno Vasco, Dpto. Industria, Innovación, Comercio y Turismo under the ELKARTEK Program (Grant No. KK-2019/bmG19). CIC biomaGUNE is supported by the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—Grant No. MDM-2017-0720., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PLGA protein nanocarriers with tailor-made fluorescence/MRI/PET imaging modalities

  • Zhang, Yajie
  • García Gabilondo, Miguel
  • Grayston, Alba
  • Feiner, Irene V. J.
  • Anton Sales, Irene
  • Azevedo Loiola, Rodrigo
  • Llop, Jordi
  • Ramos Cabrer, Pedro
  • Barba, Ignasi
  • Garcia Dorado, David
  • Gosselet, Fabien
  • Rosell, Anna
  • Roig Serra, Anna
Designing theranostic nanocarriers with high protein payload and multimodality tracking without cross interferences between the different imaging probes and the delicate protein cargo is challenging. Here, chemical modifications of poly(lactic-co-glycolic acid) (PLGA) to produce nanocapsules (NCs) that incorporate several imaging moieties are reported. The biocompatible and biodegradable PLGA-NCs can be endowed with a magnetic resonance imaging (MRI) reporter, two fluorescence imaging probes (blue/NIR) and a positron emission tomography (PET) reporter. The modular integration of these imaging moieties into the shell of the NCs is successfully achieved without affecting the morphochemical properties of the nanocarrier or the protein loading capacity. In vivo biodistribution of the NCs is monitored by MRI, PET and NIRF and the results from different techniques are analyzed comparatively. The viabilities of two different human endothelial cells in vitro show no toxicity for NC concentration up to 100 μg mL−1 . The morbidity of mice for 2 weeks after systemic administration and the hepatic/pancreatic enzymes at the plasma level indicate their in vivo biosafety. In summary, the new theranostic PLGA nanoplatform presented here shows versatile in vitro/in vivo multimodal imaging capabilities, excellent biosafety and over 1 wt% protein loading., The Acciones Complementarias program from the Instituto de Salud Carlos III, Spain, co-financed by the European Regional Development Fund (AC17/00004 grant) as part of the MAGBBRIS project (Euronanomed III 8th joint call), and the RETICS INVICTUS RD16/0019/0021 are acknowledged. The Miguel Servet program (CPII15/00003) and PFIS program (FI17/00073) from Fondo de Investigaciones SanitariasInstituto de Salud Carlos III and ERDF supported A. Rosell and A. G. research contracts. This work was also partially supported by the Spanish Ministry of Science, Innovation and Universities through the grants PCIN-2017-090, RTI2018- 096273-B-I00, CTQ2017-87637-R, SAF2017-87670-R, SEV-2015- 0496 and MDM-2017-0720 and by the Generalitat de Catalunya grants (2017SGR765 & 2017SGR1427). Yajie Zhang is supported by the China Scholarship Council (CSC). FG and RAL are supported by the French national agency (ANR) through the grant ANR-17-ENM3-0005-01. The authors thank Dr Vanessa GómezVallejo, Dr Unai Cossío, Dr Xabier Rios and Zuriñe Baz for support in labelling and PET in vivo experimentation. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

MRI/Photoluminescence Dual-Modal Imaging Magnetic PLGA Nanocapsules for Theranostics

  • Zhang, Yajie
  • García Gabilondo, Miguel
  • Rosell, Anna
  • Roig Serra, Anna
Developing multifunctional and biocompatible drug delivery nanoplatforms that integrate high drug loads and multiple imaging modalities avoiding cross-interferences is extremely challenging. Here we report on the successful chemical reaction of the high quantum yield biodegradable and photoluminescent polyester (BPLP) with the poly(lactic-co-glycolic acid) (PLGA) polymer to fabricate biocompatible photoluminescent nanocapsules (NCs). Furthermore, we transform the PLGA-BPLP NCs into a magnetic resonance (MR)/photoluminescence dual-modal imaging theranostic platform by incorporating superparamagnetic iron oxide nanoparticles (SPIONs) into the polymeric shell. In vitro phantoms confirmed the excellent MRI-r2 relaxivity values of the NCs whilst the cellular uptake of these NCs was clearly observed by fluorescence optical imaging. Besides, the NCs (mean size ~270 nm) were loaded with ~1 wt% of a model protein (BSA) and their PEGylation provided a more hydrophilic surface. The NCs show biocompatibility in vitro, as hCMEC/D3 endothelial cells viability was not affected for particle concentration up to 500 μg/mL. Interestingly, NCs decorated with SPIONs can be exploited for magnetic guiding and retention., This work was partially supported by the Spanish Ministry of Science, Innovation and Universities through the grants PCIN-2017-090, RTI2018-096273-B-I00, CTQ2017-87637-R, SAF2017-87670-R, SEV-2015-0496 and MDM-2017-0720 and by the Generalitat de Catalunya grants (2017SGR765 & 2017SGR1427). Yajie Zhang was supported by the China Scholarship Council (CSC). The Acciones Complementarias program from the Instituto de Salud Carlos III, Spain, co-financed by the European Regional Development Fund (AC17/00004 grant) as part of the MAGBBRIS project (Euronanomed III 8th joint call), and the RETICS INVICTUS RD16/0019/0021 were acknowledged. Miguel Servet program (CPII15/00003) from Fondo de Investigaciones Sanitarias-Instituto de Salud Carlos III and ERDF, supported A. Roig research contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission

  • Vila Liarte, David
  • Feil, Maximilian W.
  • Manzi, Aurora
  • García Pomar, Juan Luis
  • Huang, He
  • Döblinger, Markus
  • Liz-Marzán, Luis Manuel
  • Feldmann, Jochen
  • Polavarapu, Lakshminarayana
  • Mihi, Agustín
Perovskite nanocrystals (NCs) have revolutionized optoelectronic devices because of their versatile optical properties. However, controlling and extending these functionalities often requires a light management strategy involving additional processing steps. Here, we introduce a simple approach to shape perovskite nanocrystals (NC) into photonic architectures that provide light management by directly shaping the active material. Pre‐patterned polydimethylsiloxane (PDMS) templates are used for the template‐induced self‐assembly of 10 nm CsPbBr 3 perovskite NC colloids into large area (1 cm 2 ) 2D photonic crystals with tunable lattice spacing, ranging from 400 nm up to several microns. The photonic crystal arrangement facilitates efficient light coupling to the nanocrystal layer, thereby increasing the electric field intensity within the perovskite film. As a result, CsPbBr 3 2D photonic crystals show amplified spontaneous emission (ASE) under lower optical excitation fluences in the near‐IR, in contrast to equivalent flat NC films prepared using the same colloidal ink. This is attributed to the enhanced multi‐photon absorption caused by light trapping in the photonic crystal., D. Vila-Liarte and M. W. Feil have contributed equally to this work. We acknowledge financial support by the Bavarian State Ministry of Science, Research, and Arts through the grant “Solar Technologies go Hybrid (SolTech)”. We thank local research clusters and centers such as CeNS for providing communicative networking structures. We also acknowledge support from the Spanish Ministerio de Ciencia e Innovación through Grants No. SEV-2015-0496 and MDM-2017-0720, in the framework of the Spanish Severo Ochoa and María de Maeztu Centers of Excellence program. This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 637116, ENLIGHTMENT). H.H acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 839042., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cellulose as an inert scaffold in plasmon-assisted photoregeneration of cofactor molecules

  • Tarnowicz-Staniak, Nina
  • Vázquez-Díaz, Silvia
  • Pavlov, Valeri
  • Matczyszyn, Katarzyna
  • Grzelczak, Marek
Plasmonic nanoparticles exhibit excellent light-harvesting properties in the visible spectral range, which makes them a convenient material for the conversion of light into useful chemical fuel. However, the need for using surface ligands to ensure colloidal stability of nanoparticles inhibits their photochemical performance due to the insulating molecular shell hindering the carrier transport. We show that cellulose fibers, abundant in chemical functional groups, can serve as a robust substrate for the immobilization of gold nanorods, thus also providing a facile way to remove the surfactant molecules. The resulting functional composite was implemented in a bioinspired photocatalytic process involving dehydrogenation of sodium formate and simultaneous photoregeneration of cofactor molecules (NADH, nicotinamide adenine dinucleotide) using visible light as an energy source. By systematic screening of experimental parameters, we compare photocatalytic and thermocatalytic properties of the composite and evaluate the role of palladium cocatalyst., M.G. acknowledges funding from the Spanish MINECO (grant MAT2013-49375-EXP) and the BBVA Foundation - “Primera convocatoria de ayudas fundacion BBVA a investigadores, innovadores y creadores culturales”. N.T.-S. acknowledges the support from the BioTechNan (NCBiR) program of interdisciplinary PhD studies at Wrocław University of Science and Technology as well as the support from the Photonics and Bionanotechnology Association (PhoBiA). The work was also financed by a statutory activity subsidy from the Polish Ministry of Science and Higher Education for the Faculty of Chemistry of Wrocław University of Science and Technology. S.V. D. and V. P. acknowledge the support by the Spanish Ministry of Science, Innovation, and Universities (project BIO2017-88030-R), Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency grant no. MDM-2017-0720., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Na+ controls hypoxic signalling by the mitochondrial respiratory chain

  • Hernansanz-Agustín, Pablo
  • Choya-Foces, Carmen
  • Carregal-Romero, Susana
  • Ramos, Elena
  • Oliva, Tamara
  • Villa-Piña, Tamara
  • Moreno Capellán, Laura
  • Izquierdo-Álvarez, Alicia
  • Cabrera-García, J. Daniel
  • Cortés, Ana
  • Lechuga-Vieco, Ana V.
  • Jadiya, Pooja
  • Navarro, Elena
  • Parada, Esther
  • Palomino-Antolín, Alejandra
  • Tello, Daniel
  • Acín-Pérez, Rebeca
  • Rodríguez-Aguilera, Juan Carlos
  • Navas, Plácido
  • Cogolludo, Angel
  • López-Montero, Iván
  • Martínez-del-Pozo, Álvaro
  • Egea, Javier
  • López, Manuela G.
  • Elrod, John W.
  • Ruiz-Cabello, Jesús
  • Bogdanova, Anna
  • Enríquez, José Antonio
  • Martínez-Ruiz, Antonio
All metazoans depend on the consumption of O2 by the mitochondrial oxidative phosphorylation system (OXPHOS) to produce energy. In addition, the OXPHOS uses O2 to produce reactive oxygen species that can drive cell adaptations1,2,3,4, a phenomenon that occurs in hypoxia4,5,6,7,8 and whose precise mechanism remains unknown. Ca2+ is the best known ion that acts as a second messenger9, yet the role ascribed to Na+ is to serve as a mere mediator of membrane potential10. Here we show that Na+ acts as a second messenger that regulates OXPHOS function and the production of reactive oxygen species by modulating the fluidity of the inner mitochondrial membrane. A conformational shift in mitochondrial complex I during acute hypoxia11 drives acidification of the matrix and the release of free Ca2+ from calcium phosphate (CaP) precipitates. The concomitant activation of the mitochondrial Na+/Ca2+ exchanger promotes the import of Na+ into the matrix. Na+ interacts with phospholipids, reducing inner mitochondrial membrane fluidity and the mobility of free ubiquinone between complex II and complex III, but not inside supercomplexes. As a consequence, superoxide is produced at complex III. The inhibition of Na+ import through the Na+/Ca2+ exchanger is sufficient to block this pathway, preventing adaptation to hypoxia. These results reveal that Na+ controls OXPHOS function and redox signalling through an unexpected interaction with phospholipids, with profound consequences for cellular metabolism., This research has been financed by Spanish Government grants (ISCIII and AEI agencies, partially funded by the European Union FEDER/ERDF) CSD2007-00020 (RosasNet, Consolider-Ingenio 2010 programme to A.M.-R. and J.A.E.); CP07/00143, PS09/00101, PI12/00875, PI15/00107 and RTI2018-094203-B-I00 (to A.M.-R.); CP12/03304 and PI15/01100 (to L.M.); CP14/00008, CPII19/00005 and PI16/00735 (to J.E.); SAF2016-77222-R (to A. Cogolludo); PI17/01286 (to P.N.); SAF2015-65633-R, RTI2018-099357-B-I00 and CB16/10/00282 (to J.A.E.); RTI2018-095793-B-I00 (to M.G.L.); and SAF2017-84494-2-R (to J.R.-C.), by the European Union (ITN GA317433 to J.A.E. and MC-CIG GA304217 to R.A.-P.), by grants from the Comunidad de Madrid B2017/BMD-3727 (to A. Cogolludo) and B2017/BMD-3827 (to M.G.L.), by a grant from the Fundación Domingo Martínez (to M.G.L. and A.M.-R.), by the Human Frontier Science Program grant HFSP-RGP0016/2018 (to J.A.E.), by grants from the Fundación BBVA (to R.A.-P. and J.R.-C.), by the UCM-Banco Santander grant PR75/18-21561 (to A.M.-d.-P.), by the Programa Red Guipuzcoana de Ciencia, Tecnología e Información 2018-CIEN-000058-01 (to J.R.-C.) and from the Basque Government under the ELKARTEK Program (grant no. KK-2019/bmG19 to J.R.-C.), by the Swiss National Science Foundation (SNF) grant 310030_124970/1 (to A.B.), by a travel grant from the IIS-IP (to P.H.-A.) and by the COST actions TD0901 (HypoxiaNet) and BM1203 (EU-ROS). The CNIC is supported by the Pro-CNIC Foundation and is a Severo Ochoa Center of Excellence (Spanish Government award SEV-2015-0505). CIC biomaGUNE is supported by the María de Maeztu Units of Excellence Program from the Spanish Government (MDM-2017-0720). P.H.-A. was a recipient of a predoctoral FPU fellowship from the Spanish Government. E.N. is a recipient of a predoctoral FPI fellowship from the Universidad Autónoma de Madrid (UAM). A.M.-R., L.M. and J.E. are supported by the I3SNS or ‘Miguel Servet’ programmes (ISCIII, Spanish Government; partially funded by the FEDER/ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Present and future of surface-enhanced raman scattering

  • Langer, Judith
  • Jimenez de Aberasturi, Dorleta
  • Aizpurua, Javier
  • Alvarez Puebla, Ramón A.
  • Auguié, Baptiste
  • Baumberg, Jeremy J.
  • Bazan, Guillermo C.
  • Bell, Steven
  • Boisen, Anja
  • Brolo, Alexandre G.
  • Choo, Jaebum
  • Cialla-May, Dana
  • Deckert, Volker
  • Fabris, Laura
  • Faulds, Karen
  • García de Abajo, Francisco Javier
  • Goodacre, Roy
  • Graham, Duncan
  • Haes, Amanda J.
  • Haynes, Christy L.
  • Huck-Iriart, Cristián
  • Itoh, Tamitake
  • Käll, Mikael
  • Kneipp, Janina
  • Kotov, Nicholas A.
  • Kuang, Hua
  • Le Ru, Eric C.
  • Kwee Lee, Hiang
  • Li, Jian
  • Ling, Xing Yi
  • Maier, Stefan A.
  • Mayerhöfer, Thomas
  • Moskovits, Martin
  • Murakoshi, Kei
  • Nam, Jwa-Min
  • Nie, Shuming
  • Oazki, Yukihiro
  • Pastoriza-Santos, Isabel
  • Pérez‐Juste, Jorge
  • Popp, Jürgen
  • Pucci, Annemarie
  • Reich, Stephanie
  • Ren, Bin
  • Schatz, George
  • Shegai, Timur
  • Schlücker, Sebastian
  • Li-Lin, Tay
  • Thomas, K. George
  • Tian, Zhong-Qun
  • Van Duyne, Richard
  • Vo-Dinh, Tuan
  • Wang, Yue
  • Willets, Katherine
  • Xu, Chuanlai
  • Xu, Hongxing
  • Xu, Yikai
  • Yamamoto, Yuko S.
  • Zhao, Bing
  • Liz-Marzán, Luis Manuel
The discovery of the enhancement of Raman scattering by molecules adsorbed on nanostructured metal surfaces is a landmark in the history of spectroscopic and analytical techniques. Significant experimental and theoretical effort has been directed toward understanding the surface-enhanced Raman scattering (SERS) effect and demonstrating its potential in various types of ultrasensitive sensing applications in a wide variety of fields. In the 45 years since its discovery, SERS has blossomed into a rich area of research and technology, but additional efforts are still needed before it can be routinely used analytically and in commercial products. In this Review, prominent authors from around the world joined together to summarize the state of the art in understanding and using SERS and to predict what can be expected in the near future in terms of research, applications, and technological development. This Review is dedicated to SERS pioneer and our coauthor, the late Prof. Richard Van Duyne, whom we lost during the preparation of this article., Funding is acknowledged from the European Research Council (ERC Advanced Grant No. 787510-4DBIOSERS to L.M.L.-M., ERC Advanced Grant No. 789104-eNANO to F.J.G.A., ERC Starting Grant No. 259432-MULTIBIOPHOT to J.K., ERC Consolidator Grant No. 772108-DarkSERS); the Department of Education of the Basque Government (Grant No. IT1164-19 to J.A.); the Spanish MINECO (CTQ2017-88648-R to R.A.-P., MAT2016-77809-R to I.P.-S. and J.P.-J.); the EPSRC (EP/P034063/1 to S.B., EP/L027151/1 to J.B., EP/L014165/1 to D.G. and K.F.); IDUN-Danish National Research Foundation (DNRF122) and Villum Fonden (Grant No. 9301) to A.B.; the National Research Foundation of Korea (Grant No. 2019R1A2C3004375 to J.B.); the German Science Foundation, DFG (SFB 1278 Polytarget (Project B4) to V.D., Grant No. SCHL 594/13-1 to S.S., Germany’s Excellence Strategy (EXC 2089/1-390776260) to S.M.); the Federal Ministry of Education and Research, Germany (BMBF) (Grant InfectoGnostics 13GW0096F to D.C.-M. and J.P.); DARPA-16-35-INTERCEPT-FP-018 to L.F.; the UK BBSRC (Grant No. BB/L014823/1 to R.G.); the Department of Science and Technology (DST Nanomission Project SR/NM/NS-23/2016 to K.G.T.); the U.S. National Science Foundation (Grant No. CHE-1707859 to A.J.H., Center for Sustainable Nanotechnology CHE-1503408 (Centers for Chemical Innovation Program) to C.L.H., Center for Chemical Innovation Chemistry at the Space-Time Limit (CaSTL) CHE-1414466 to G.C.S. and R.P.V.D., Grant No. CHE-1807269 to K.A.W.); the Knut and Alice Wallenberg Foundation to M.K.; the Office of Naval Research (Grant No. N00014-18-1-2876 to N.A.K.); Royal Society of New Zealand Te Apa̅rangi to E.L.R. and B.A.; Singapore Ministry of Education, Tier 1 (RG11/18) to X.Y.L.; the Photoexcitonix Project in Hokkaido Univ., Japan, to K.M.; BioNano Health-Guard Research Center funded by the Ministry of Science and ICT (MSIT) of Korea as Global Frontier Project (Grant No. H-GUARD_2013M3A6B2078947) to J.-M.N.; NSFC of P. R. China (Grant No. 21705015 to Y.O., Grant No. 21633005 to B.R.); National Key R&D Program (2017YFA0206902) to C.X. This work was coordinated under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—Grant No. MDM-2017-0720., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strongly coupled exciton–plasmon nanohybrids reveal extraordinary resistance to harsh environmental stressors: temperature, pH and irradiation

  • Hendel, Thomas
  • Krivenkov, Victor
  • Sánchez-Iglesias, Ana
  • Grzelczak, Marek
  • Rakovich, Yury P.
Hybridized plexcitonic states have unique properties which have been widely studied in recent decades in many research fields targeted at both fundamental science and innovative applications. However, to make these applications come true one needs to ensure the stabilization and preservation of electronic states and optical transitions in hybrid nanostructures, especially under the influence of external stressors, in regimes, that have not yet been comprehensively investigated. The present work shows that the nanohybrid system, composed of plasmonic nanoparticles and J-aggregates of organic molecules, displays outstanding resistance to harsh environmental stressors such as temperature, pH and strong light irradiation as well as demonstrates long-term stability and processability of the nanostructures both in weak and strong coupling regimes. These findings contribute to a deeper understanding of the physicochemical properties of plexcitonic nanoparticles and may find important implications for the development of potential applications in optoelectronics, optical imaging and chemo-bio-sensing and, in general, in the field of optical materials science., Authors acknowledge the financial support from the Ministry of Education and Science of the Russian Federation (grant no. 14.Y26.31.0011). Y. R. acknowledges the support from the Basque Government (grant no. IT1164-19). M. G. acknowledges support from the Basque Government (PIBA 2018-34), and Diputación Foral de Guipúzcoa (RED 2018, RED 2019). A. S. I. acknowledges the Maria de Maeztu Units of Excellence Programme – Grant No. MDM-2017-0720 Ministry of Science, Innovation and Universities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Radiolabeled Cobaltabis(dicarbollide) Anion–Graphene Oxide Nanocomposites for In Vivo Bioimaging and Boron Delivery

  • Ferrer Ugalde, Albert
  • Sandoval, Stefania
  • Pulagam, Krishna Reddy
  • Muñoz Juan, Amanda
  • Laromaine, Anna
  • Llop, Jordi
  • Tobias, Gerard
  • Núñez Aguilera, Rosario
A carbon-based hybrid nanocomposite, which consists of monoiodinated boron-cluster derivatives covalently attached to graphene oxide, is hereby introduced. This GO-I-COSAN has been synthesized using a novel boron-rich cobaltabis(dicarbollide) precursor with one iodide group attached to one of the boron atoms of the cluster (I-COSAN) and designed to be subsequently labeled with radioactive 124I for its use in positron emission tomography (PET). In vitro cytotoxicity studies of GO-I-COSAN with HeLa cells at different concentrations up to 48 h proved that the cell mortality was lower than 10%, indicating minimal cytotoxicity of the nanomaterial. Remarkably, internalization of the nanomaterial by cells was confirmed by transmission electron microscopy, which indicated its accumulation in the cytoplasm, without causing changes in either the size or morphology of the cells. Additionally, in vivo tests using Caenorhabditis elegans confirmed that GO-I-COSAN could be ingested by the worms, showing no significant damage and very low toxicity, which supports the results observed in the in vitro studies. Radioisotopic labeling of I-COSAN using a palladium-catalyzed isotopic exchange reaction with Na[124I]I and its subsequent functionalization onto GO was performed successfully, leading to formation of the radioactive nanocomposite GO-[124I]I-COSAN, which was quickly injected in mice. PET images at different times revealed excellent in vivo stability of the developed nanomaterial. No activity in thyroid and stomach was observed even at long times, proving that iodide did not detach from the material. GO-[124I]I-COSAN presented a favorable biodistribution profile, being mainly accumulated in the liver and slightly in the lung, with a long residence time on blood and progressive elimination via the gastrointestinal tract. It is noteworthy that the high boron content of this material paves the way toward theranostics because it benefits of a traceable boron delivery for boron neutron capture therapy., This work was supported by the Spanish Ministry of Science and Innovation MICINN, through the Severo Ochoa Program for Centers of Excellence FUNFUTURE (CEX2019-000917- S), for funding with an internal Severo Ochoa FIP project. J.L. thanks the Spanish Ministry of Economy and Competitiveness for funding through Grant CTQ2017-87637-R. Part of the work was conducted under the Maria de Maeztu Units of Excellence Programme (Grant MDM-2017-0720). A.M.-J. and A.L. are thankful for financial support from the Spanish Ministry of Science and Innovation through Project RTI2018- 096273-B-I00 and a Ph.D. scholarship for A.M.J. (FPU18/ 05190) and the Generalitat de Catalunya with Projects 2017SGR765 and 2017SGR581. A.M.-J. and A.L. participated in the MICINN, “Research Networks” nanoCARE (RED2018- 102469-T). This work has been conducted within the Biotechnology Doctoral Program of the Autonomous University of Barcelona (A.M.J). The authors thank the staff from the Servei de Cultius Cel·lulars and Servei de Microscopia, ̀ both at the UAB, for performing the cytotoxicity studies, cellular uptake analysis, and HRTEM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thrombo-tag, an: In vivo formed nanotracer for the detection of thrombi in mice by fast pre-targeted molecular imaging

  • Adrover, José M.
  • Pellico, Juan
  • Fernández-Barahona, Irene
  • Martin-Salamanca, Sandra
  • Ruiz-Cabello, Jesús
  • Hidalgo, Andrés
  • Herranz, Fernando
Radioisotope-labelled nanoparticles permit novel applications in molecular imaging, while recent developments in imaging have enabled direct visualization of biological processes. While this holds true for pathological processes that are stable in time, such as cancer, imaging approaches are limited for phenomena that take place in the range of minutes, such as thrombotic events. Here, we take advantage of bioorthogonal chemistry to demonstrate the concept of nanoparticle-based fast pre-targeted imaging. Using a newly designed nanoparticle that targets platelets we show the applicability of this approach developing thrombo-tag, an in vivo produced nanoparticle that labels thrombi. We show that thrombo-tag allows specific labelling of platelets that accumulate in the injured pulmonary vasculature, or that aggregate in brains of mice suffering thrombotic processes. The fast kinetics and high specificity features of thrombo-tag may critically expand the application of molecular imaging to the most prevalent and debilitating diseases in the clinics., This work was supported by the Spanish Ministry of Science, grants number (SAF2016-79593-P, SAF2017-84494-C2-R and RED2018-102469-T), and from the Gobierno Vasco, Dpto. Industria, Innovación, Comercio y Turismo under the ELKARTEK Program (Grant No. KK-2019/bmG19). JR-C received funding from the BBVA Foundation (Ayudas a Equipos de investigación científica Biomedicina 2018). The study was also supported by Intramural grants from the Severo Ochoa program (IGP-SO), a grant from Fundació La Marató de TV3 (120/C/2015-20153032), grant SAF2015-65607-Rfrom Ministerio de Ciencia e Innovacion (MICINN) withcofunding from Fondo Europeo de Desarrollo Regional, grantRTI2018-095497-B-I00 from MICINN, and HR17_00527 from Fundación La Caixa (to A. H.), and fellowship BES-2013-065550from MICINN (to J. M. A.). The CNIC is supported by theMICINN and the Pro-CNIC Foundation, and is a Severo OchoaCenter of Excellence (MICINN award SEV-2015-0505). CICbiomaGUNE is supported by the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency–Grant No. MDM-2017-0720.The authors wish to thank the staffat the Advance ImagingUnit in the Spanish Cardiovascular Research Centre for theirhelp in the imaging studies. We acknowledge support of thepublication fee by the CSIC Open Access Publication SupportInitiative through its Unit of Information Resources forResearch (URICI). We thank Dr. M. Eugenio Vázquez for coverdesign.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailored methodology based on vapor phase polymerization to manufacture PEDOT/CNT scaffolds for tissue engineering

  • Domínguez Alfaro, Antonio
  • Alegret, Nuria
  • Arnaiz, Blanca
  • González Domínguez, José Miguel
  • Martín Pacheco, Ana
  • Cossío, Unai
  • Porcarelli, Luca
  • Bosi, Susanna
  • Vázquez, Ester
  • Mecerreyes, David
  • Prato, Maurizio
8 figures.-- Supporting information available on the editor's web page.-- This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Biomaterials Science & Engineering, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see http://dx.doi.org/10.1021/acsbiomaterials.9b01316, Three-dimensional (3D) scaffolds with tailored stiffness, porosity, and conductive properties are particularly important in tissue engineering for electroactive cell attachment, proliferation, and vascularization. Carbon nanotubes (CNTs) and poly(3,4-ethylenedioxythiophene) (PEDOT) have been extensively used separately as neural interfaces showing excellent results. Herein, we combine both the materials and manufacture 3D structures composed exclusively of PEDOT and CNTs using a methodology based on vapor phase polymerization of PEDOT onto a CNT/sucrose template. Such a strategy presents versatility to produce porous scaffolds, after leaching out the sucrose grains, with different ratios of polymer/CNTs, and controllable and tunable electrical and mechanical properties. The resulting 3D structures show Young’s modulus typical of soft materials (20–50 kPa), as well as high electrical conductivity, which may play an important role in electroactive cell growth. The conductive PEDOT/CNT porous scaffolds present high biocompatibility after 3 and 6 days of C8-D1A astrocyte incubation., The Spanish Ministry of Economy and Competitiveness MINECO (project CTQ2016-76721-R), the University of Trieste, Diputación Foral de Gipuzkoa program Red (101/16), and the European Commission (H2020-MSCA-RISE-2016, grant agreement no. 734381, acronym CARBO-IMmap) and ELKARTEK bmG2017 (Ref: Elkartek KK-2017/00008, BOPV resolution: 8 Feb 2018) are gratefully acknowledged for financial support. MP, as the recipient of the AXA Chair, is grateful to the AXA Research Fund for financial support. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—grant no. MDM-2017-0720. NA has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 753293, acronym NanoBEAT., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surfactant‐Assisted Symmetry Breaking in Colloidal Gold Nanocrystal Growth

  • González Rubio, Guillermo
  • Scarabelli, Leonardo
  • Guerrero Martínez, Andrés
  • Liz-Marzán, Luis Manuel
Colloidal anisotropic gold nanocrystals play a central role in the field of plasmonics owing to their tunable optical activity across a wide spectral range. However, achieving sufficient optical quality for practical implementation requires advanced synthetic protocols yielding gold nanocrystals with the desired morphology and plasmonic properties. This Minireview focuses on a fundamental step during the growth of anisotropic nanocrystals, namely symmetry breaking. In connection with thermodynamic and kinetic control of nanocrystal growth, we discuss the complex interplay between the role of seed morphology and that of surfactants, shape‐directing additives and reducing agents. We revisit some iconic syntheses of anisotropic gold nanoparticles, including nanorods, nanotriangles, and nanobipyramids. Finally, we analyze the use of co‐surfactants as an emerging strategy to disconnect the symmetry breaking event from the anisotropic growth process, overcoming current limitations in the synthesis of anisotropic gold nanocrystals., G. González‐Rubio gratefully acknowledges the Alexander von Humboldt Foundation for financial support. This work has been funded by the Spanish Ministry of Science, Innovation and Universities (grants RTI2018‐095844‐B‐I00, MAT2017‐86659‐R) and the Madrid Regional Government (grant P2018/NMT‐4389). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency – Grant No. MDM‐2017‐0720., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Intracerebral injection of graphene oxide nanosheets mitigates microglial activation without inducing acute neurotoxicity: A pilot comparison to other nanomaterials

  • Portioli, Corinne
  • Bussy, Cyrill
  • Mazza, Mariarosa
  • Lozano, Neus
  • Jasim, Dhifaf
  • Prato, Maurizio
  • Bianco, Alberto
  • Bentivoglio, Marina
  • Kostarelos, Kostas
Carbon‐based nanomaterials (CNMs) are being explored for neurological applications. However, systematic in vivo studies investigating the effects of CNM nanocarriers in the brain and how brain cells respond to such nanomaterials are scarce. To address this, functionalized multiwalled carbon nanotubes and graphene oxide (GO) sheets are injected in mice brain and compared with charged liposomes. The induction of acute neuroinflammatory and neurotoxic effects locally and in brain structures distant from the injection site are assessed up to 1 week postadministration. While significant neuronal cell loss and sustained microglial cell activation are observed after injection of cationic liposomes, none of the tested CNMs induces either neurodegeneration or microglial activation. Among the candidate nanocarriers tested, GO sheets appear to elicit the least deleterious neuroinflammatory profile. At molecular level, GO induces moderate activation of proinflammatory markers compared to vehicle control. At histological level, brain response to GO is lower than after vehicle control injection, suggesting some capacity for GO to reduce the impact of stereotactic injection on brain. While these findings are encouraging and valuable in the selection and design of nanomaterial‐based brain delivery systems, they warrant further investigations to better understand the mechanisms underlying GO immunomodulatory properties in brain., This work was partly supported by the EU H2020 RTD Framework Program: FET Graphene Flagship project (GrapheneCore3, Grant agreement ID: 881603), the Centre National de la Recherche Scientifique (CNRS), the International Center for Frontier Research in Chemistry (icFRC), and the Agence Nationale de la Recherche (ANR) through the LabEx project Chemistry of Complex Systems (ANR‐10‐LABX‐0026_CSC). M.P., as the recipient of the AXA Carbon Bionanotechnology Chair, is grateful to the AXA Research Fund for financial support. MP was also supported by the Spanish Ministry of Economy and Competitiveness MINECO (project CTQ2016‐76721‐R), the University of Trieste, and the Spanish State Research Agency (Maria de Maeztu Units of Excellence Program Grant No. MDM‐2017‐0720). Financial support to this project was partially provided by the Fondazione Cariverona (“Verona Nanomedicine Initiative”) and funding from an intramural (University of Verona) international cooperation program (“CooperInt”) was obtained. K.K. would like to acknowledge the Severo Ochoa Centre of Excellence Award to ICN2., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cell identity and nucleo-mitochondrial genetic context modulate OXPHOS performance and determine somatic heteroplasmy dynamics

  • Lechuga-Vieco, Ana V.
  • Latorre-Pellicer, Ana
  • Johnston, Iain G.
  • Prota, Gennaro
  • Gileadi, Uzi
  • Justo-Méndez, Raquel
  • Acín-Pérez, Rebeca
  • Martínez-De-Mena, Raquel
  • Fernández-Toro, José María
  • Jimenez-Blasco, Daniel
  • Mora, Alfonso
  • Nicolás-Ávila, José A.
  • Santiago, Demetrio J.
  • Priori, Silvia G.
  • Bolaños, Juan P.
  • Sabio, Guadalupe
  • Criado, Luis M.
  • Ruiz-Cabello, Jesús
  • Cerundolo, Vincenzo
  • Jones, Nick S.
  • Enríquez, José Antonio
Heteroplasmy, multiple variants of mitochondrial DNA (mtDNA) in the same cytoplasm, may be naturally generated by mutations but is counteracted by a genetic mtDNA bottleneck during oocyte development. Engineered heteroplasmic mice with nonpathological mtDNA variants reveal a nonrandom tissue-specific mtDNA segregation pattern, with few tissues that do not show segregation. The driving force for this dynamic complex pattern has remained unexplained for decades, challenging our understanding of this fundamental biological problem and hindering clinical planning for inherited diseases. Here, we demonstrate that the nonrandom mtDNA segregation is an intracellular process based on organelle selection. This cell type-specific decision arises jointly from the impact of mtDNA haplotypes on the oxidative phosphorylation (OXPHOS) system and the cell metabolic requirements and is strongly sensitive to the nuclear context and to environmental cues., This study was supported by MINECO SAF2015-65633-R to JAE, SAF2016-78114-R to J.P.B. and SAF2017- 84494-C2-1-R to J.R.-C. G.S. thanks MINECO-FEDER SAF2016-79126-R and Comunidad de Madrid IMMUNOTHERCAN-CM B2017/BMD-3733. N.S.J. thanks EP/N014529/1. CIBERFES (CB16/10/00282) to J.P.B. and J.A.E., and H2020 European Commission (BatCure grant 666918) to J.P.B. A.V.L.-V. was supported by SOFPI-fellowship from the MINECO. V.C. is supported by the UK Medical Research Council, Cancer Research UK (CRUK) (C399/A2291), and the Oxford Biomedical Research Centre. I.G.J. thanks the European Research Council (ERC- No. 805046-EvoConBiO). The CNIC is supported by MINECO and Pro-CNIC Foundation and is a SO-MINECO (award SEV-2015-0505). CIC biomaGUNE is supported by the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (grant no. MDM-2017- 0720), ELKARTEK Program (grant no. KK-2019/bmG19), and BBVA Foundation (Ayudas a Equipos de investigación científica Biomedicina 2018)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Iron-Based Core-Shell Nanowires for Combinatorial Drug Delivery and Photothermal and Magnetic Therapy

  • Martínez-Banderas, Aldo Isaac
  • Aires, Antonio
  • Quintanilla, Marta
  • Holguin Lerma, Jorge Alberto
  • Lozano-Pedraza, Claudia
  • Teran, Francisco José
  • Moreno Garcia, Julian
  • Perez, Jose E.
  • Ooi, Boon S.
  • Ravasi, Timothy
  • Merzaban, Jasmeen S.
  • Cortajarena, Aitziber L.
  • Kosel, Jürgen
Combining different therapies into a single nanomaterial platform is a promising approach for achieving more efficient, less invasive, and personalized treatments. Here, we report on the development of such a platform by utilizing nanowires with an iron core and iron oxide shell as drug carriers and exploiting their optical and magnetic properties. The iron core has a large magnetization, which provides the foundation for low-power magnetic manipulation and magnetomechanical treatment. The iron oxide shell enables functionalization with doxorubicin through a pH-sensitive linker, providing selective intracellular drug delivery. Combined, the core–shell nanostructure features an enhanced light–matter interaction in the near-infrared region, resulting in a high photothermal conversion efficiency of >80% for effective photothermal treatment. Applied to cancer cells, the collective effect of the three modalities results in an extremely efficient treatment with nearly complete cell death (∼90%). In combination with the possibility of guidance and detection, this platform provides powerful tools for the development of advanced treatments., This work has been partially funded by the Spanish Ministerio de Economía y Competitividad (BIO2016-77367-C2-1-R, MAT2017-85617-R, SEV-2016-0686 and MAT2016-81955-REDT), the Basque Government (Elkartek KK-2017/00008), and Madrid Regional Government (PEJ-2017-AI/IND-6283). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—Grant No. MDM-2017-0720 (CIC biomaGUNE). C.L.-P. acknowledges financial support from CAM (PEJ-2017-AI/IND-6283).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mechanically Tunable Lattice-Plasmon Resonances by Templated Self-Assembled Superlattices for Multi-Wavelength Surface-Enhanced Raman Spectroscopy

  • Charconnet, Mathias
  • Kuttner, Christian
  • Plou, Javier
  • García Pomar, Juan Luis
  • Mihi, Agustín
  • Liz-Marzán, Luis Manuel
  • Seifert, Andreas
Lattice plasmons, i.e., diffractively coupled localized surface plasmon resonances, occur in long-range ordered plasmonic nanostructures such as 1D and 2D periodic lattices. Such far-field coupled resonances can be employed for ultrasensitive surface-enhanced Raman spectroscopy (SERS), provided they are spectrally matched to the excitation wavelength. The spectral positions of lattice plasmon modes critically depend on the lattice period and uniformity, owing to their pronounced sensitivity to structural disorder. We report the fabrication of superlattices by templated self-assembly of gold nanoparticles on a flexible support, with tunable lattice-plasmon resonances by means of macroscopic strain. We demonstrate that the highest SERS performance is achieved by matching the lattice plasmon mode to the excitation wavelength, by post-assembly fine-tuning of long-range structural parameters. Both asymmetric and symmetric lattice deformations can be used to adapt a single lattice structure to both red-shifted and blue-shifted excitation lines, as exemplified by lattice expansion and contraction, respectively. This proof-of-principle study represents a basis for alternative designs of adaptive functional nanostructures with mechanically tunable lattice resonances using strain as a macroscopic control parameter., M.C. and C.K. contributed equally to this work. This work was supported by the Spanish Ministry of Economy, Industry, and Competitiveness under the Maria de Maeztu and Severo Ochoa Units of Excellence Programme – MDM-2016-0618, MDM-2017-0720, and FUNFUTURE (No. CEX2019-000917-S); by the Basque Government in the Elkartek Program 2020/21; by the Spanish Ministerio de Ciencia e Innovación (No. PID2019-106860GB-I00); by the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant Agreement No. 799393 (NANOBIOME); Marie Skłodowska-Curie grant agreement no. 840064 (2D_PHOT); and by the European Research Council (ERC-AdG-2017 No. 787510, 4DbioSERS). The authors thank Dr. Judith Langer for scientific discussions and Eneko Lopez for the design and additive manufacturing of the 2D stretching device., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Templated Colloidal Self-Assembly for Lattice Plasmon Engineering

  • Scarabelli, Leonardo
  • Vila Liarte, David
  • Mihi, Agustín
  • Liz Marzán, Luis M.
Over the past 30 years, the engineering of plasmonic resonances at the nanoscale has progressed dramatically, with important contributions in a variety of different fields, including chemistry, physics, biology, engineering, and medicine. However, heavy optical losses related to the use of noble metals for the fabrication of plasmonic structures hindered their application in various settings. Recently, an answer to these long-lasting issues emerged in the use of lattice plasmon resonances (LPRs, also called surface lattice resonances), bringing new excitement in the field of plasmonics. Specifically, the organization of plasmonic nanoparticles into ordered arrays enables far-field coupling of the scattered light exploiting the diffraction modes of the array, generating plasmonic resonances with bandwidths as narrow as a few nanometers, corresponding to an increase of over 10-fold in the quality factors compared to localized plasmon resonances. As such, LPRs offer new opportunities to harness light–matter interactions at the nanoscale, while generating renewed interest in the self-assembly of colloidal metal nanoparticles, as a scalable approach to the preparation of such plasmonic arrays. Templated self-assembly emerged as one of the most versatile approaches, being compatible with soft-lithographic techniques such as nanoimprint lithography and amenable to a variety of materials, colloids, and solvents. Templated self-assembly additionally allows the preparation of arrays where the repeating units are composed of multiple self-assembled nanoparticles (i.e., plasmonic clusters). In this system, near-field coupling can be finely tuned, thereby showing promising results in biosensing, catalysis, or plasmonic heating. In this Account, we review the preparation of ordered arrays of clusters of plasmonic nanoparticles. We present various aspects involved in the templated self-assembly of colloidal nanoparticles, with the aim of achieving at the same time close-packed structures within each cavity of the template, and uniform deposition over a large area. We then analyze the optical properties of the prepared substrates. The preparation of hierarchical structures and the possibility of tuning both the internal structure of the cluster and their organization into arrays with different lattice parameters enable control over both near-field and far-field plasmonic coupling. This unique feature of such substrates makes it possible to exploit the interplay between these two types of coupling, for the preparation of versatile functional substrates, expanding the possibilities for the integration of plasmonic arrays into functional devices for various applications. A well-established example is their use for surface-enhanced Raman scattering. On the other hand, optimization of far-field coupling provides access to plasmonic cavities for lasing or refractive index sensing. Despite two decades of fervid scientific research, the preparation and engineering of plasmonic arrays remains a relevant topic, and many directions remain largely unexplored. We conclude with a collection of perspectives and challenges that we find particularly stimulating toward future developments of the field., This project has received funding from the Spanish Ministerio de Ciencia e Innovación through grants PID2019-106860GBI00 and FUNFUTURE (CEX2019-000917-S), in the framework of the Spanish Severo Ochoa Centre of Excellence program, as well as MDM-2017-0720 grant to CIC biomaGUNE. The research of L.S. is supported by the 2020 Postdoctoral Junior Leader-Incoming Fellowship by “la Caixa” Foundation (ID 100010434, fellowship code LCF/BQ/PI20/ 11760028). D.V.-L. acknowledges financial support from an FPI contract (PRE2018-084706) of the MICINN (Spain). L.M.L.-M. acknowledges funding from the European Research Council (ERC AdG 787510, 4DbioSERS) and the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (Grant No. MDM-2017-0720)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One-pot biotransformation of glycerol into serinol catalysed by biocatalytic composites made of whole cells and immobilised enzymes

  • Ripoll, Magdalena
  • Velasco-Lozano, Susana
  • Jackson, Erienne
  • Diamanti, Eleftheria
  • Betancor, Lorena
  • López-Gallego, Fernando
Biocatalytic cascades afford the development of economically sustainable and green processes. Herein we examined the unprecedented coupling of co-immobilised Gluconobacter oxydans and an isolated transaminase to synthesise serinol from glycerol. Through this approach, we manufactured up to 36 mM serinol, the highest titer ever reported for a non-fermentative biosynthesis. More importantly, similar productivities are obtained starting from the industrial by-product crude glycerol, demonstrating the possibilities of this hybrid heterogenenous biocatalyst for valorising bio-based raw materials., S. Velasco acknowledges CONACyT for the granted postdoctoral fellowship. L. Betancor, E. Jackson and M. Ripoll acknowledge PEDECIBA, National Research and Innovation Agency of Uruguay (ANII) (POS_NAC_2019_1_158182) and Universidad ORT Uruguay. Fernando López acknowledges the funding of IKERBASQUE and Spanish Government (BIO2015-69887-R). This work was performed under the Maria de Maeztu Units of Excellence Programme – Grant No. MDM-2017-0720 Ministry of Science, Innovation and Universities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering multifunctional metal/protein hybrid nanomaterials as tools for therapeutic intervention and high-sensitivity detection

  • Aires, Antonio
  • Maestro, David
  • Ruiz del Río, Jorge
  • Palanca, Ana R.
  • López-Martínez, Elena
  • Llarena, Irantzu
  • Geraki, Kalotina
  • Sánchez-Cano, Carlos
  • Villar Ramos, Ana V.
  • Cortajarena, Aitziber L.
© 2021 The Author(s)., Protein-based hybrid nanomaterials have recently emerged as promising platforms to fabricate tailored multifunctional biologics for biotechnological and biomedical applications. This work shows a simple, modular, and versatile strategy to design custom protein hybrid nanomaterials. This approach combines for the first time the engineering of a therapeutic protein module with the engineering of a nanomaterial-stabilizing module within the same molecule, resulting in a multifunctional hybrid nanocomposite unachievable through conventional material synthesis methodologies. As the first proof of concept, a multifunctional system was designed ad hoc for the therapeutic intervention and monitoring of myocardial fibrosis. This hybrid nanomaterial combines a designed Hsp90 inhibitory domain and a metal nanocluster stabilizing module resulting in a biologic drug labelled with a metal nanocluster. The engineered nanomaterial actively reduced myocardial fibrosis and heart hypertrophy in an animal model of cardiac remodeling. In addition to the therapeutic effect, the metal nanocluster allowed for in vitro, ex vivo, and in vivo detection and imaging of the fibrotic disease under study. This study evidences the potential of combining protein engineering and protein-directed nanomaterial engineering approaches to design custom nanomaterials as theranostic tools, opening up unexplored routes to date for the next generation of advanced nanomaterials in medicine., This work was partially supported by the European Research Council ERC-CoG-648071-ProNANO and ERC-PoC-841063-NIMM; Agencia Estatal de Investigación, Spain (PID2019-111649RB-I00; RTI2018-095214-B-I00; BIO2016-77367-C2-1-R; and BIO2015-72124-EXP); the Basque Government (Elkartek KK-2017/00008; RIS3-2019222005); and IDIVAL InnVal 17/22. C. S. C. thanks Gipuzkoa Foru Aldundia (Gipuzkoa Fellows program; grant number 2019-FELL-000018-01/62/2019) for financial support. E.L.-M. thanks the Spanish Ministry of Science and Innovation for the FPI grant (BES-2017-079646). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency – Grant No. MDM-2017-0720 (CIC biomaGUNE). SXRF maps were acquired at the I18 beamline in the frame of the Diamond proposals SP20603.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Functionalization of porous cellulose with glyoxyl groups as a carrier for enzyme immobilization and stabilization

  • Martins de Oliveira, Sandro
  • Velasco-Lozano, Susana
  • Orrego, Alejandro H.
  • Rocha-Martín, Javier
  • Moreno-Pérez, Sonia
  • Fraile, José M.
  • López-Gallego, Fernando
  • Guisán, José Manuel
The functionalization of the internal surface of macroporous carriers with glyoxyl groups has proven to highly stabilize a large variety of enzymes through multipoint covalent immobilization. In this work, we have translated the surface chemistry developed for the fabrication of glyoxyl-agarose carriers to macroporous cellulose (CEL). To that aim, CEL-based microbeads were functionalized with glyoxyl groups through a stepwise alkoxylation (or alkylation)/oxidation synthetic scheme. This functionalization sequence was analyzed by solid-state NMR, while the scanning electron miscroscopy of CEL microbeads reveals that the mild oxidation conditions negligibly affect the morphological properties of the material. Through the optimal functionalization protocol using rac-glycidol, we introduce up to 200 μmols of aldehyde groups per gram of wet CEL, a similar density to the one obtained for the benchmarked agarose-glyoxyl carrier. This novel CEL-based carrier succeeds to immobilize and stabilize industrially relevant enzymes such as d-amino acid oxidase from Trigonopsis variabilis and xylanases from Trichoderma reseei. Remarkably, the xylanases immobilized on the optimal CEL-based materials present a half-life time of 51 h at 60 °C and convert up to 90% of the xylan after four operation cycles for the synthesis of xylooligosaccharides., The authors acknowledge funding from the National Council for Scientific and Technological Development (CNPq) for financial support for the PhD scholarships of S.M.O (Process CsF 201683/2014–2008). J.M.G thanks the funding from the EU FP7 project Lignofood (Ingredients for Food and Beverage Industry from a Lignocellulosic Source, grant agreement no 606073). F.L-G acknowledges the funding of IKERBASQUE. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—grant no. MDM-2017-0720. J.M.F., thanks to the funding from the Spanish Ministerio de Ciencia e Innovación (grant RTI2018-093431-BI00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strong coupling effects in a plexciton system of gold nanostars and J-aggregates

  • Melnikau, D.
  • Samokhvalov, Pavel S.
  • Sánchez-Iglesias, Ana
  • Grzelczak, Marek
  • Nabiev, Igor
  • Rakovich, Yury P.
Strong exciton–plasmon interaction enables effective control of the photonic properties of hybrid organic–inorganic nanostructures encompassing light absorption, scattering and luminescence. Whereas the manifestations of light-matter interactions in the absorption and scattering are reasonably well understood their relation to the luminescence as well as luminescence properties themselves in strongly coupled plexcitonic hybrids is still largely underexplored especially for a system with a complex mechanism of hybridisation of states. Here we report on investigation of the interaction between localized and hybridized plasmons in gold nanostars and excitons in J-aggregates under ambient conditions. Our findings demonstrate the quality performance of the formed plexciton system with multiple hybridization channels in terms of the parameters of strong coupling, such as Rabi splitting (230 meV), coupling-strength-to-transition energy ratio (0.07), and cooperativity (2.03). The results of time-resolved experiments elucidate the observed enhanced spontaneous emission rate with regard to the Purcell effect, whose value was estimated from the extinction spectra of the strongly coupled plexciton system., Financial supports from Projects PID2019-111772RB-I00 of the Spanish MINECO and the Ministry of Science and Higher Education of the Russian Federation (Grant No. 14.Y26.31.0011) are acknowledged. Y. R. acknowledges the support from the Basque Government (grant no. IT1164-19). P.S. and I.N acknowledge support from the Russian Science Foundation (grant no. 21-79-30048) of the part of this work related to nanomaterials manufacturing and functionalisation. I.N. acknowledges support from the Université de Reims Champagne-Ardenne. A.S.-I. acknowledges the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (Grant No. MDM-2017-0720)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrasmall manganese ferrites for in vivo catalase mimicking activity and multimodal bioimaging

  • Carregal-Romero, Susana
  • Miguel-Coello, Ana Beatriz
  • Martínez-Parra, Lydia
  • Martí-Mateo, Yolanda
  • Hernansanz-Agustín, Pablo
  • Fernández-Afonso, Yilian
  • Plaza-García, Sandra
  • Gutiérrez, Lucía
  • Muñoz-Hernández, María del Mar
  • Carrillo-Romero, Juliana
  • Piñol-Cancer, Marina
  • Lecante, Pierre
  • Blasco-Iturri, Zuriñe
  • Fadón, Lucía
  • Almansa-García, Ana C.
  • Möller, Marco
  • Otaegui, Dorleta
  • Enríquez, Jose Antonio
  • Groult, Hugo
  • Ruíz-Cabello, Jesús
Manganese ferrite nanoparticles display interesting features in bioimaging and catalytic therapies. They have been recently used in theranostics as contrast agents in magnetic resonance imaging (MRI), and as catalase-mimicking nanozymes for hypoxia alleviation. These promising applications encourage the development of novel synthetic procedures to enhance the bioimaging and catalytic properties of these nanomaterials simultaneously. Herein, a cost-efficient synthetic microwave method is developed to manufacture ultrasmall manganese ferrite nanoparticles as advanced multimodal contrast agents in MRI and positron emission tomography (PET), and improved nanozymes. Such a synthetic method allows doping ferrites with Mn in a wide stoichiometric range (MnxFe3-xO4, 0.1 ≤ x ≤ 2.4), affording a library of nanoparticles with different magnetic relaxivities and catalytic properties. These tuned magnetic properties give rise to either positive or dual-mode MRI contrast agents. On the other hand, higher levels of Mn doping enhance the catalytic efficiency of the resulting nanozymes. Finally, through their intracellular catalase-mimicking activity, these ultrasmall manganese ferrite nanoparticles induce an unprecedented tumor growth inhibition in a breast cancer murine model. All of these results show the robust characteristics of these nanoparticles for nanobiotechnological applications., The authors thank M. Jeannin from Lasie Laboratory (La Rochelle University) for the Raman studies. S.C.R. is supported by the grant PID2019-106139RA-100 funded by MCIN. J.R.-C. is supported by grants from the Ministerio de Economía, Industria y Competitividad (MEIC) (SAF2017-84494-C2-R). J.R.C. received funding from the BBVA Foundation (PR [18]_BIO_IMG_0008) and La Caixa (HR18-00052). Y.F.-A. received funding from the Santander-Universidad Zaragoza Fellowship program. L.G. acknowledges financial support from the Ramón y Cajal program (RYC-2014-15512). CIC biomaGUNE is supported by the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (MDM-2017-0720). The authors acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. H.G. is supported by the Ligue contre le Cancer (CD16, CD17) and Région Nouvelle Aquitaine (Projet “Nanovect”). J.A.E. is supported by RTI2018-099357-B-I00, HFSP (RGP0016/2018), CIBERFES16/10/00282 and RED2018-102576-T. The CNIC is supported by the Pro-CNIC Foundation and by the Severo Ochoa of Excellence Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineered protein-driven synthesis of tunable iron oxide nanoparticles as T1 and T2 magnetic resonance imaging contrast agents

  • Aires, Antonio
  • Fernández-Afonso, Yilian
  • Guedes, Gabriela
  • Guisasola, Eduardo
  • Gutiérrez, Lucía
  • Cortajarena, Aitziber L.
Iron oxide nanoparticles (IONPs) have become one of the most promising nanomaterials for biomedical applications because of their biocompatibility and physicochemical properties. This study demonstrates the use of protein engineering as a novel approach to design scaffolds for the tunable synthesis of ultrasmall IONPs. Rationally designed proteins, containing different number of metal-coordination sites, were evaluated to control the size and the physicochemical and magnetic properties of a set of protein-stabilized IONPs (Prot-IONPs). Prot-IONPs, synthesized through an optimized coprecipitation approach, presented good T1 and T2 relaxivity values, stability, and biocompatibility, showing potential for magnetic resonance imaging (MRI) applications., A.L.C. acknowledges support from the European Research Council ERC-CoG-648071-ProNANO, ERC-PoC-101069356-NanoImaging; Agencia Estatal de Investigación, Spain (PID2019-111649RB-I00); and the Basque Government (RIS3-2019222005). L.G. acknowledges the Agencia Estatal de Investigación, Spain for PGC2018-096016-B-I00 project. G.G. acknowledges the financial support from the “la Caixa” Foundation (ID100010434, fellowship: LCF/BQ/DI20/11780020). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency Grant MDM-2017-0720 (CIC biomaGUNE). We thank Dr. J. Calvo, Dr. R. Pazos, Dr. D. Di Silvio, Dr. S. Plaza, Dr. D. Padró, M. Gallego, and M. Moller at CIC biomaGUNE for the support with mass spectrometry, X-ray photoelectron spectroscopy, MRI, and TEM measurements. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fluorine Labeling of Nanoparticles and In Vivo 19F Magnetic Resonance Imaging

  • Arango, Juan Manuel
  • Padro, Daniel
  • Blanco, Jorge
  • López-Fernández, Sonia
  • Castellnou, Pilar
  • Villa-Valverde, Palmira
  • Ruiz-Cabello, Jesús
  • Martín, Abraham
  • Carril, Mónica
Fluorinated nanoparticles have increasing applications, but they are still challenging to prepare, especially in the case of water-soluble fluorinated nanoparticles. Herein, a fluorine labeling strategy is presented that is based on the conjugation of custom-made small fluorinated building blocks, obtained by simple synthetic transformations, with carboxylated gold nanoparticles through a convenient phase-transfer process. The synthesis of four fluorinated building blocks with different chemical shifts in 19F nuclear magnetic resonance and varied functionalities is reported, along with their conjugation onto nanoparticles. Fluorinated nanoparticles of small core size obtained by this conjugation methodology and by direct synthesis presented high transverse relaxation times (T2) ranging from 518 to 1030 ms, and a large number of equivalent fluorine atoms per nanoparticle (340-1260 fluorine atoms), which made them potential candidates for 19F magnetic resonance related applications. Finally, nontargeted fluorinated nanoparticles were probed by performing in vivo 19F magnetic resonance spectroscopy (19F MRS) in mice. Nanoparticles were detected at both 1 and 2 h after being injected. 19F MRI images were also acquired after either intravenous or subcutaneous injection. Their fate was studied by analyzing the gold content in tissues by ICP-MS. Thus, the present work provides a general fluorination strategy for nanoparticles and shows the potential use of small fluorinated nanoparticles in magnetic-resonance-related applications., This work was supported in part by grants from the Spanish State Research Agency (MCI/PID2019-107449RB-I00/AEI/10.13039/501100011033, RYC-2017-22412, and SAF2017-84494-C2-R), from the Fundación Biofísica Bizkaia, the Basque Excellence Research Centre (BERC) program, and projects IT1196-19 and Grant KK-2019/bmG19 of the Basque Government. We also thank the UE for funding (Nova MRI, H2020-MSCA-ITN-2018-811382). This work was performed under the Maria de Maeztu Units of Excellence Programme Grant MDM-2017-0720 ministry of Science, Innovation and Universities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Therapeutic Pretargeting with Gold Nanoparticles as Drug Candidates for Boron Neutron Capture Therapy

  • Feiner, Irene V. J.
  • Pulagam, Krishna R.
  • Gómez-Vallejo, Vanessa
  • Zamacola, Kepa
  • Baz, Zuriñe
  • Caffarel, María M.
  • Lawrie, Charles H.
  • Ruiz-de-Angulo, Ane
  • Carril, Mónica
  • Llop, Jordi
Boron neutron capture therapy (BNCT) is a binary approach for cancer treatment in which boron-10 atoms and thermal neutrons need to colocalize to become effective. Recent research in the development of BNCT drug candidates focuses increasingly on nanomaterials, with the advantages of high boron loadings and passive targeting due to the enhanced permeability and retention (EPR) effect. The use of small boron-rich gold nanoparticles (AuNPs) in combination with a pretargeting approach is proposed. Small sized polyethylene glycol–stabilized AuNPs (core size 4.1 ± 1.5 nm), are synthesized and functionalized with thiolated cobalt bis(dicarbollide) and tetrazine. To enable in vivo tracking of the AuNPs by positron emission tomography (PET), the core is doped with [64Cu]CuCl2. For the pretargeting approach, the monoclonal antibody Trastuzumab is functionalized with trans-cyclooctene-N-hydroxysuccinimide ester. After proving in vitro occurrence of the antibody conjugation onto the AuNPs by click reaction and the low toxicity of the AuNPs, the boron delivery system is evaluated in vivo using breast cancer xenograft bearing mice and PET imaging. Tumor uptake due to the EPR effect can be witnessed with ≈5% injected dose (ID) cm−3 at 24 h postinjection, but with slower clearance than expected. Therefore, no increased retention can be observed using the pretargeting strategy., The project was carried out under the H2020—MSCA-ITN-2015 program, Grant Agreement No. 675417. J.L. thanks the Spanish Ministry of Economy and Competitiveness (Project No. CTQ2017-87637-R) for financial support. Part of the work has been performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (Grant No. MDM-2017-0720)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Single-Step Functionalization Strategy of Graphene Microtransistor Array with Chemically Modified Aptamers for Biosensing Applications

  • Brosel-Oliu, Sergi
  • Rius, Gemma
  • Aviñó, Anna
  • Nakatsuka, Nako
  • Illa, Xavi
  • Del Corro, Elena
  • Delgà-Fernández, Marta
  • Masvidal Codina, Eduard
  • Rodríguez, Natalia
  • Merino, Juan Pedro
  • Criado, Alejandro
  • Prato, Maurizio
  • Tkatchenko, Raphaela
  • Eritja, Ramón
  • Godignon, Philippe
  • Garrido, José Antonio
  • Villa, Rosa
  • Guimerà, Anton
  • Prats-Alfonso, Elisabet
Graphene solution-gated field-effect transistors (gSGFETs) offer high potential for chemical and biochemical sensing applications. Among the current trends to improve this technology, the functionalization processes are gaining relevance for its crucial impact on biosensing performance. Previous efforts are focused on simplifying the attachment procedure from standard multi-step to single-step strategies, but they still suffer from overreaction, and impurity issues and are limited to a particular ligand. Herein, a novel strategy for single-step immobilization of chemically modified aptamers with fluorenylmethyl and acridine moieties, based on a straightforward synthetic route to overcome the aforementioned limitations is presented. This approach is benchmarked versus a standard multi-step strategy using thrombin as detection model. In order to assess the reliability of the functionalization strategies 48-gSGFETs arrays are employed to acquire large datasets with multiple replicas. Graphene surface characterization demonstrates robust and higher efficiency in the chemical coupling of the aptamers with the single-step strategy, while the electrical response evaluation validates the sensing capability, allowing to implement different alternatives for data analysis and reduce the sensing variability. In this work, a new tool capable of overcome the functionalization challenges of graphene surfaces is provided, paving the way toward the standardization of gSGFETs for biosensing purposes., This work has made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MICINN and the ICTS NANBIOSIS, more specifically by the Micro-NanoTechnology Unit U8 and the Oligonucleotide synthesis platform U29 of the CIBER-BBN. This work has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No. 881603 (GrapheneCore3) and No. 785219 (GrapheneCore2). The authors also acknowledge funding from the Generalitat de Catalunya (2021SGR00495). G.R. thanks to the Ayuda RYC-2016-21412, E.dC thanks to the Ayuda RYC2019-027879-I and A.C. thanks to RYC2020-030183-I founded by MCIN/AEI /10.13039/501100011033 and by El FSE invierte en tu futuro.M.P. as recipient of the AXA Chair, is grateful to AXA Chair in Nanobiotechnology supported by the AXA Research Fund. This research was funded by the Spanish Ministerio de Ciencia e Innovación (PID2020-118145RB-I00, PID2021-126117NA-I00) and by “ERDF A way of making Europe”, also this work was funded by CIBER-BBN (CB06/01/0019 & CB06/01/0049). Part of this work was performed under the Maria de Maeztu Units of Excellence Program grant MDM-2017-0720 funded by MCIN/AEI/10.13039/501100011033. The authors acknowledge the financial support provided by CIBER-BBN and the Instituto de Salud Carlos III with assistance from the European Regional Development., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

CLIP-Seq analysis enables the design of protective ribosomal RNA bait oligonucleotides against C9ORF72 ALS/FTD poly-GR pathophysiology

  • Ortega, Juan A.
  • Sasselli, Ivan R.
  • Boccitto, Marco
  • Fleming, Andrew C.
  • Fortuna, Tyler R.
  • Li, Yichen
  • Sato, Kohei
  • Clemons, Tristan D.
  • Nguyen, Thao P.
  • Anderson, Eric N.
  • Mckenna, Elizabeth D.
  • Asin, Jesus
  • Ichida, Justin K.
  • Pandey, Udai B.
  • Wolin, Sandra L.
  • Stupp, Samuel I.
  • Kiskinis, Evangelos
Amyotrophic lateral sclerosis and frontotemporal dementia patients with a hexanucleotide repeat expansion in C9ORF72 (C9-HRE) accumulate poly-GR and poly-PR aggregates. The pathogenicity of these arginine-rich dipeptide repeats (R-DPRs) is thought to be driven by their propensity to bind low-complexity domains of multivalent proteins. However, the ability of R-DPRs to bind native RNA and the significance of this interaction remain unclear. Here, we used computational and experimental approaches to characterize the physicochemical properties of R-DPRs and their interaction with RNA. We find that poly-GR predominantly binds ribosomal RNA (rRNA) in cells and exhibits an interaction that is predicted to be energetically stronger than that for associated ribosomal proteins. Critically, modified rRNA “bait” oligonucleotides restore poly-GR–associated ribosomal deficits and ameliorate poly-GR toxicity in patient neurons and Drosophila models. Our work strengthens the hypothesis that ribosomal function is impaired by R-DPRs, highlights a role for direct rRNA binding in mediating ribosomal dysfunction, and presents a strategy for protecting against C9-HRE pathophysiological mechanisms., This work was supported by the U.S. National Institutes of Health (NIH) National Institute of Neurological Disorders and Stroke (NINDS) and National Institute of Aging (NIA) grant R01NS104219 (E.K.); NIH/NINDS grant R21NS107761 (E.K.); AFM-Telethon French Muscular Dystrophy Association Trampoline Grant #23648 (J.A.O.); AFM-Telethon postdoctoral fellowship (J.A.O.); Ramon y Cajal fellowships RYC2019-026980-I (J.A.O.) and RYC2021-033294-I (I.R.S.); Gipuzkoa Foru Aldundia 2019-FELL-000017-01 (I.R.S.); Maria de Maeztu Units of Excellence CEX2021-001159-M (J.A.O.) and MDM-2017-0720 (I.R.S.); NINDS grants R01NS097850 and R01NS131409 (J.K.I.); Department of Defense grants PR211919 and W81XWH2110131 (J.K.I.); John Douglas French Alzheimer’s Foundation (J.K.I.); Center for Regenerative Nanomedicine at the Simpson Querrey Institute (S.I.S. and T.D.C.); Intramural Research Program, NIH, National Cancer Institute (NCI), Center for Cancer Research (M.B. and S.L.W.); Les Turner ALS Foundation (E.K.); and New York Stem Cell Foundation (J.K.I. and E.K.)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001159-M (J.A.O.))., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Divalent transition metal coatings for an effective protein-nanoparticle conjugation

  • Armenia, Ilaria
  • Ovejero, Jesús G.
  • Zeballos, Nicoll
  • López-Gallego, Fernando
  • Palomares, F. Javier
  • Veintemillas-Verdaguer, S.
  • Fuente, Jesús M. de la
  • Morales, María Del Puerto
  • Grazú, Valeria
Magnetic nanoparticles (MNPs) are widely used for immobilizing complex biomolecules such as proteins due to their high loading capacity, biocompatibility, and easy magnetic harvesting. However, there is not a universal solution to achieve the oriented immobilization of the protein of interest. One common strategy involves the selective binding of poly-histidine-tagged (His-tag) proteins to divalent transition metal centers (TM2+) chelated by organic molecules like nitrilotriacetic acid (NTA). This article describes an innovative procedure to functionalize MNPs by simply growing of a thin layer of TM2+ hydroxides on the MNP surface, which increases the number of coordination centers and enhances the surface interaction with the protein surface. The immobilization yields of two sets of MNPs coated with Co2+, Ni2+ and Cu2+ hydroxides were compared to the conventional coating using the same inorganic cores but coated and functionalized with NTA-TM2+ moieties. It is shown that the one-step Co coated MNPs showed the highest selectivity and specificity towards His-tags. Thus, this coating not only reduce the functionalization steps to drive an oriented protein binding but also achieve an increment of immobilization yields over 1.5-fold respect to NTA-Co2+ analogous for his-tagged proteins with different 3D complexity while preserving similar or even higher enzymatic activity., This work was funded by the European Commission through the HOTZYMES Project (H2020-FETOPEN-RIA 829162), r by the following grants funded by the Spanish Ministry of Science and Innovation and the Spanish State Research Agency (MCIN/AEI) PID2020-113480RB-I00 (to SVV and MPM), PID2020-118485RB-I00 (to VG and JMF), PID2021-126169OB-I00 (to FJP) and by “ERDF A way of making Europe”. FLG thanks IKERBASQUE for sponsoring him. JMF acknowledges CIBER -Consorcio Centro de Investigación Biomédica en Red-(CB16/01/00263), Instituto de Salud Carlos III (Spanish Ministry of Science and Innovation), Gobierno de Aragón and “ERDF A way of making Europe” for funding the Bionanosurf (E15_20R) research group. This research was also funded by the European Commission-Next Generation EU (Regulation EU 2020/2094). This work has been also partially performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—Grant no. MDM-2017-0720 (CIC biomaGUNE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-sufficient heterogeneous biocatalysis through boronic acid-diol complexation of adenylated cofactors

  • Diamanti, Eleftheria
  • Velasco-Lozano, Susana
  • Grajales-Hernández, Daniel A.
  • Orrego, Alejandro H.
  • Di Silvio, Desiré
  • Fraile, José M.
  • López-Gallego, Fernando
Self-sufficient heterogeneous biocatalysts (ssHB) are promising candidates for implementing cofactor-dependent enzymes in chemical biomanufacturing. Most strategies for coimmobilizing cofactors with dehydrogenases on porous agarose microbeads involve the use of cationic polymers (i.e., polyethylenimine, PEI) that interact electrostatically with the phosphate groups of their corresponding phosphorylated cofactors. Although the latter is a powerful and versatile approach, ionic bonds are disrupted in biotransformations operating at a high ionic strength, where screening of bonded ions takes place. Harnessing the ribose groups present in adenylated cofactors, we immobilize a selection of these (NAD(P)H, NAD(P)+, FAD, and ATP) on agarose microbeads functionalized with boronic acid to establish reversible covalent bonds between the cis-diol of the ribose in the cofactor backbone and the boronic acid. To do so, we functionalize cobalt-activated porous agarose beads with boronic acid (AG-B/Co2+) for the coimmobilization of adenylated cofactors with the corresponding cofactor dependent His-tagged dehydrogenases. First, we demonstrate that the adenylated cofactor-support interactions are reversible but show resistance against high salt concentrations, overcoming the main limitation of the current self-sufficient heterogeneous biocatalysts. Then, we coimmobilized several His-tagged enzymes with their corresponding adenylated cofactors and investigated the functionality and stability of these ssHBs in reductive aminations performed under high ionic strength in both batch and flow reactors. As a result, we manage to reuse the immobilized enzymes and the cofactors 3.5 × 105 and 167 times, respectively. This work expands the usefulness of ssBHs for hitherto bioprocess regardless of the ionic strength of the media., This work has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 818089). F.L.-G. acknowledges the funding of IKERBASQUE and the Spanish State Research Agency (AIE; RTI2018-094398-B-I00). A.H.O. thanks BIKAINTEK program (Basque Government) for cofunding him. S.V.-L. acknowledges the funding received from ARAID Foundation. D.G.H. acknowledges the funding received from CONACYT postdoctoral program. This work was supported by the Spanish Ministry of Science and Innovation under the Maria de Maeztu Units of Excellence Program (MDM-2017-0720)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spatial organization of immobilized multienzyme systems improves the deracemization of alkyl glyceryl ethers

  • Grajales-Hernández, Daniel A.
  • Diamanti, Eleftheria
  • Moro, Riccardo
  • Velasco-Lozano, Susana
  • López-Gallego, Fernando
Production of enantiomerically pure molecules is of utmost importance in the pharma industry. In this context, biocatalysis emerges as an alternative to conventional chemical methods due to the exquisite selectivity and specificity underlying the enzymes. In this work, we design a multienzymatic system to perform the deracemization of alkyl glyceryl ethers as potential building blocks for the synthesis of drugs. The key to success in this route is controlling the spatial organization of the enzymes involved in the cascade through their immobilization on porous carriers. By fine tuning the intraparticle organization of an enzymatic cascade comprising an (S)-selective glycerol dehydrogenase from Bacillus stearothermophilus and an (R)-selective ketoreductase from Lactobacillus kefir, we performed the oxidoreductive deracemization of rac-alkyl/aryl glyceryl ethers with a yield up to 100% and enantiomeric excess e.e. > 99%, otherwise impossible using a soluble system. Remarkably, we find that optimal spatial assembly of the biocatalyst ameliorates the inhibition phenomena experimented by the system and increases the deracemization rate by 4-fold. Finally, integrating an enzymatic nicotinamide adenine dinucleotide oxidized disodium salt (NAD+) regeneration system to the heterogeneous biocatalyst, we intensified the process by reusing it in discontinuous and consecutive batch cycles and scaling the reaction up to 250 mM substrate, achieving 100% yield and e.e. > 99%., This work was supported by the Spanish Agency of Research (AEI) (ref TED2021-129852B-C21, PID2021-124811OB-I00, PID2021-125762NB-I00) and Aragon Government E37_23 R. This work was partially performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency Grant MDM-2017-0720. D.G.-H. acknowledges Consejo Nacional de Ciencia y Tecnología (CONACyT) for the granted scholarship under the program EPE 2021. S.V. and E.P. acknowledge Gobierno de Aragón grupo E37_23 R. E.P. also acknowledges the Spanish Ministerio de Ciencia e Innovación (project number PID2021-125762NB-I00). This work was also funded by the Basque Government with the BIKAINTEK (HETDERAC (019-B1/2023)) and IKERBASQU programs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessment of the MARTINI 3 performance for short peptide self-assembly

  • Sasselli, Ivan R.
  • Coluzza, Ivan
The coarse-grained MARTINI force field, initially developed for membranes, has proven to be an exceptional tool for investigating supramolecular peptide assemblies. Over the years, the force field underwent refinements to enhance accuracy, enabling, for example, the reproduction of protein–ligand interactions and constant pH behavior. However, these protein-focused improvements seem to have compromised its ability to model short peptide self-assembly. In this study, we assess the performance of MARTINI 3 in reproducing peptide self-assembly using the well-established diphenylalanine (FF) as our test case. Unlike its success in version 2.1, FF does not even exhibit aggregation in version 3. By systematically exploring parameters for the aromatic side chains and charged backbone beads, we established a parameter set that effectively reproduces tube formation. Remarkably, these parameter adjustments also replicate the self-assembly of other di- and tripeptides and coassemblies. Furthermore, our analysis uncovers pivotal insights for enhancing the performance of MARTINI in modeling short peptide self-assembly. Specifically, we identify issues stemming from overestimated hydrophilicity arising from charged termini and disruptions in π-stacking interactions due to insufficient planarity in aromatic groups and a discrepancy in intermolecular distances between this and backbone–backbone interactions. This investigation demonstrates that strategic modifications can harness the advancements offered by MARTINI 3 for the realm of short peptide self-assembly., This work was carried out at the ATLAS HPC Cluster at the DIPC. I.R.S. acknowledges financial support from Maria de Maeztu Unit of Excellence (MDM-2017-0720), Gipuzkoa Foru Aldundia (Gipuzkoa Fellows Program, Diputacion Foral de Gipuzkoa: 2019-FELL-000017-01), Ramon y Cajal Program (RYC2021-033294-I), and Spanish State Research Agency (PID2022-136392NA-I00). I.C. thanks the support of the computing infrastructure of the i2BASQUE academic network. I.C. thanks for the technical and human support provided by SGIker (UPV/EHU/ERDF, EU). This research was supported by the Spanish Ministerio de Ciencia e Innovación (PID2022-139467OB-I00). I.C. thanks support from the HPC Europe program (EHPC-BEN-2023B07-015 and EHPC-DEV-2023D06-018). This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) as well as by the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and Fundación BCMaterials on behalf of the Department of Education of the Basque Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Colloidal quasicrystals engineered with DNA

  • Zhou, Wenjie
  • Lim, Yein
  • Lin, Haixin
  • Lee, Sangmin
  • Li, Yuanwei
  • Huang, Ziyin
  • Du, Jingshan S.
  • Lee, Byeongdu
  • Wang, Shunzhi
  • Sánchez-Iglesias, Ana
  • Grzelczak, Marek
  • Liz-Marzán, Luis Manuel
  • Glotzer, Sharon C.
  • Mirkin, Chad A.
In principle, designing and synthesizing almost any class of colloidal crystal is possible. Nonetheless, the deliberate and rational formation of colloidal quasicrystals has been difficult to achieve. Here we describe the assembly of colloidal quasicrystals by exploiting the geometry of nanoscale decahedra and the programmable bonding characteristics of DNA immobilized on their facets. This process is enthalpy-driven, works over a range of particle sizes and DNA lengths, and is made possible by the energetic preference of the system to maximize DNA duplex formation and favour facet alignment, generating local five- and six-coordinated motifs. This class of axial structures is defined by a square-triangle tiling with rhombus defects and successive on-average quasiperiodic layers exhibiting stacking disorder which provides the entropy necessary for thermodynamic stability. Taken together, these results establish an engineering milestone in the deliberate design of programmable matter., This material is based upon work supported by the Air Force Office of Scientific Research under awards FA9550-17-1-0348 and FA9550-22-1-0300 (nanoparticle synthesis and assembly); the Center for Bio-Inspired Energy Science, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Basic Energy Sciences under award DE-SC0000989 (oligonucleotide synthesis); and the Sherman Fairchild Foundation, Inc. (EM characterization). Z.H. acknowledges support by the NU Graduate School Cluster in Biotechnology, Systems, and Synthetic Biology, which is affiliated with the Biotechnology Training Program funded by NIGMS grant T32 GM008449. This work made use of the EPIC facility of the NUANCE Center at NU, which has received support from the Soft and Hybrid Nanotechnology Experimental (SHyNE) Resource (NSF DMR-1720139 and NNCI-1542205); the International Institute for Nanotechnology (IIN); the Keck Foundation; and the State of Illinois, through the IIN. The simulation work is supported as part of the Center for Bio-Inspired Energy Science, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Basic Energy Sciences under award number DE-SC0000989. This work uses the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by National Science Foundation grant number ACI-1548562; XSEDE award DMR 140129. This research was supported in part through computational resources and services supported by Advanced Research Computing at the University of Michigan, Ann Arbor. L.M.L.-M. acknowledges funding from the Spanish Ministry of Science and Innovation (grant number PID2020-117779R) and the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (grant number MDM-2017-0720). This research used resources of the Advanced Photon Source, a US Department of Energy (DOE) Office of Science user facility at Argonne National Laboratory and is based on research supported by the US DOE Office of Science-Basic Energy Sciences, under contract number DE-AC02-06CH11357., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering bio-brick protein scaffolds for organizing enzyme assemblies

  • Ledesma-Fernandez, Alba
  • Velasco-Lozano, Susana
  • Campos-Muelas, Pedro
  • Madrid, Ricardo
  • López-Gallego, Fernando
  • Cortajarena, Aitziber L.
Enzyme scaffolding is an emerging approach for enhancing the catalytic efficiency of multi-enzymatic cascades by controlling their spatial organization and stoichiometry. This study introduces a novel family of engineered SCAffolding Bricks, named SCABs, utilizing the consensus tetratricopeptide repeat (CTPR) domain for organized multi-enzyme systems. Two SCAB systems are developed, one employing head-to-tail interactions with reversible covalent disulfide bonds, the other relying on non-covalent metal-driven assembly via engineered metal coordinating interfaces. Enzymes are directly fused to SCAB modules, triggering assembly in a non-reducing environment or by metal presence. A proof-of-concept with formate dehydrogenase (FDH) and L-alanine dehydrogenase (AlaDH) shows enhanced specific productivity by 3.6-fold compared to free enzymes, with the covalent stapling outperforming the metal-driven assembly. This enhancement likely stems from higher-order supramolecular assembly and improved NADH cofactor regeneration, resulting in more efficient cascades. This study underscores the potential of protein engineering to tailor scaffolds, leveraging supramolecular spatial-organizing tools, for more efficient enzymatic cascade reactions., We would like to thank the financial support provided by European Commission, Era-CoBioTech (Project ID: 61HOMBIOCAT) and by the Agencia Estatal de Investigación, Spain (PID2019-111649RB-I00). A.L.C. acknowledges financial support by the Agencia Estatal de Investigación, Grants: PID2019-111649RB-I00, PID2022-137977OB-I00, and PCI2018-092984 funded by MCIN/AEI/10.13039/501100011033. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency Grant MDM-2017-0720 (CIC biomaGUNE). We thank Dr. J. Calvo for providing support with mass spectrometry and Dr. Irantzu Llanera for assisting with circular dichroism measurements at CIC biomaGUNE. Bioassays, acknowledges financial support from Era-CoBioTech (Project ID: 61 HOMBIOCAT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced hydrogen bonding by urea functionalization tunes the stability and biological properties of peptide amphiphiles

  • Xing, Huihua
  • Wigham, Caleb
  • Lee, Sieun Ruth
  • Pereira, Aramis J.
  • Campos, Luana J. de
  • Picco, Agustín S.
  • Huck-Iriart, Cristián
  • Escudero, Carlos
  • Pérez-Chirinos, Laura
  • Gajaweera, Sandun
  • Comer, Jeffrey
  • Sasselli, Ivan R.
  • Stupp, Samuel I.
  • Zha, R. Helen
  • Conda-Sheridan, Martin
Published as part of Biomacromolecules virtual special issue “Peptide Materials”., Self-assembled nanostructures such as those formed by peptide amphiphiles (PAs) are of great interest in biological and pharmacological applications. Herein, a simple and widely applicable chemical modification, a urea motif, was included in the PA's molecular structure to stabilize the nanostructures by virtue of intermolecular hydrogen bonds. Since the amino acid residue nearest to the lipid tail is the most relevant for stability, we decided to include the urea modification at that position. We prepared four groups of molecules (13 PAs in all), with varying levels of intermolecular cohesion, using amino acids with distinct β-sheet promoting potential and/or containing hydrophobic tails of distinct lengths. Each subset contained one urea-modified PA and nonmodified PAs, all with the same peptide sequence. The varied responses of these PAs to variations in pH, temperature, counterions, and biologically related proteins were examined using microscopic, X-ray, spectrometric techniques, and molecular simulations. We found that the urea group contributes to the stabilization of the morphology and internal arrangement of the assemblies against environmental stimuli for all peptide sequences. In addition, microbiological and biological studies were performed with the cationic PAs. These assays reveal that the addition of urea linkages affects the PA-cell membrane interaction, showing the potential to increase the selectivity toward bacteria. Our data indicate that the urea motif can be used to tune the stability of a wide range of PA nanostructures, allowing flexibility on the biomaterial's design and opening a myriad of options for clinical therapies., MC-S thanks the support of the National Science Foundation (NSF), CAREER Award DMR-1941731. RHZ and CW acknowledge the support of the NSF, CAREER Award DMR-2045510. IRS acknowledges financial support from Maria de Maeztu Unit of Excellence (MDM-2017-0720), Gipuzkoa Foru Aldundia (Gipuzkoa Fellows Program, Diputacion Foral de Gipuzkoa: 2019-FELL-000017-01), Ramon y Cajal Program (RYC2021-033294-I), and Spanish State Research Agency (PID2022-136392NA-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multimodal imaging of the role of hyperglycemia following experimental subarachnoid hemorrhage

  • Joya, Ana
  • Plaza-García, Sandra
  • Padro, Daniel
  • Aguado, Laura
  • Iglesias, Leyre
  • Garbizu, Maider
  • Gómez-Vallejo, Vanessa
  • Laredo, Carlos
  • Cossío, Unai
  • Torné, Ramon
  • Amaro, Sergio
  • Planas, Anna M.
  • Llop, Jordi
  • Ramos-Cabrer, Pedro
  • Justicia, Carles
  • Martín, Abraham
Hyperglycemia has been linked to worsening outcomes after subarachnoid hemorrhage (SAH). Nevertheless, the mechanisms involved in the pathogenesis of SAH have been scarcely evaluated so far. The role of hyperglycemia was assessed in an experimental model of SAH by T2 weighted, dynamic contrast-enhanced magnetic resonance imaging (T2W and DCE-MRI), [18F]BR-351 PET imaging and immunohistochemistry. Measures included the volume of bleeding, the extent of cerebral infarction and brain edema, blood brain barrier disruption (BBBd), neutrophil infiltration and matrix metalloprotease (MMP) activation. The neurofunctional outcome, neurodegeneration and myelinization were also investigated. The induction of hyperglycemia increased mortality, the size of the ischemic lesion, brain edema, neurodegeneration and worsened neurological outcome during the first 3 days after SAH in rats. In addition, these results show for the first time the exacerbating effect of hyperglycemia on in vivo MMP activation, Intercellular Adhesion Molecule 1 (ICAM-1) expression and neutrophil infiltration together with increased BBBd, bleeding volume and fibrinogen accumulation at days 1 and 3 after SAH. Notably, these data provide valuable insight into the detrimental effect of hyperglycemia on early BBB damage mediated by neutrophil infiltration and MMP activation that could explain the worse prognosis in SAH., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This study was funded by grants from the Spanish Ministry of Education and Science/FEDER RYC-2017-22412, and PID2019-107989RB-I00, PID2020-118546RB-I00 and La Marató de TV3 (17/C/2017) and by Instituto de Salud Carlos III (PI19/00936, co-funded by the European Regional Development Fund). Jordi Llop also acknowledges the Spanish Research Agency for financial support (MCIN/AEI/10.13039/501100011033; PID2020-117656RB-I00). Part of the work was performed under the Maria de Maeztu Units of Excellence Programme – Grant MDM-2017-0720 funded by MCIN/AEI/10.13039/501100011033. This work was also performed thanks to the human and technical equipment of the Magnetic Resonance Imaging Core facility at IDIBAPS (IBPS15-EE-3688 co-funded by MCIU and by ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimized spatial configuration of heterogeneous biocatalysts maximizes cell-free biosynthesis of ω-hydroxy and ω-amino acids

  • Santiago Arcos, Francisco Javier
  • Velasco-Lozano, Susana
  • Diamanti, Eleftheria
  • Benítez-Mateos, Ana I.
  • Grajales-Hernández, Daniel A.
  • Paradisi, Francesca
  • López-Gallego, Fernando
Cell-free biocatalysis is gaining momentum in producing value-added chemicals, particularly in stepwise reaction cascades. However, the stability of enzyme cascades in industrial settings is often compromised when free enzymes are involved. In this study, we have developed a stable multifunctional heterogeneous biocatalyst coimmobilizing five enzymes on microparticles to transform 1,ω-diols into 1,ω-hydroxy acids. We improved the operational efficiency and stability of the heterogeneous biocatalyst by fine-tuning the enzyme loading and spatial organization. Stability issues are overcome through postimmobilization polymer coating. The general applicability of this heterogeneous biocatalyst is demonstrated by its scale-up in both batch and packed bed reactors, allowing a product yield of >80%. The continuous process is fed with H2O2 as the oxygen source, reaching a space-time yield (STY) of 0.76 g·L–1·h–1, maintained for the first 12 h. Finally, this flow system is telescoped with a second plug-flow reactor packed with a different heterogeneous biocatalyst integrating an additional transaminase. As a result, this 6-enzyme 2-reactor system sequentially transforms 1,ω-diols into 1,ω-amino acids while in situ recycling NAD+, depleting H2O2, and generating O2., ERC-Co (METACELL-818089) and RETOS (SOMECS-RTI2018-094398-B-I00) projects are thanked for funding. F.L.-G. thanks IKERBASQUE for sponsoring him. S.V.-L. acknowledges the funding from ARAID. J.S.-A. thanks the FPI fellowship program of the Spanish Research Agency (PRE2019-090835) This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency─grant no. MDM-2017-0720 (CIC biomaGUNE). F.P. and A.I.B.-M. acknowledge the support from the SNSF (grant: 200021_192274) and the University of Bern (SELF19-03 BIORPHANDRUG)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tips and tricks in the modeling of supramolecular peptide assemblies

  • Piskorz, Tomasz K.
  • Pérez-Chirinos, Laura
  • Qiao, Baofu
  • Sasselli, Ivan R.
Supramolecular peptide assemblies (SPAs) hold promise as materials for nanotechnology and biomedicine. Although their investigation often entails adapting experimental techniques from their protein counterparts, SPAs are fundamentally distinct from proteins, posing unique challenges for their study. Computational methods have emerged as indispensable tools for gaining deeper insights into SPA structures at the molecular level, surpassing the limitations of experimental techniques, and as screening tools to reduce the experimental search space. However, computational studies have grappled with issues stemming from the absence of standardized procedures and relevant crystal structures. Fundamental disparities between SPAs and protein simulations, such as the absence of experimentally validated initial structures and the importance of the simulation size, number of molecules, and concentration, have compounded these challenges. Understanding the roles of various parameters and the capabilities of different models and simulation setups remains an ongoing endeavor. In this review, we aim to provide readers with guidance on the parameters to consider when conducting SPA simulations, elucidating their potential impact on outcomes and validity., I.R.S. acknowledges financial support from Ramon y Cajal Program (RYC2021-033294-I), and Spanish State Research Agency (PID2022-136392NA-I00). B.Q. is thankful for the support from the National Science Foundation (2328095). L.P.-C. acknowledges financial support from the Spanish State Training Subprogram (PRE2019-090076) and the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (MDM-2017-0720)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Long-living and highly efficient bio-hybrid light-emitting diodes with zero-thermal-quenching biophosphors

  • Espasa, Anna
  • Lang, Martina
  • Aguiño, Carmen F.
  • Sánchez-de Alcazar, Daniel
  • Fernández-Blázquez, Juan P.
  • Sonnewald, Uwe
  • Cortajarena, Aitziber L.
  • Coto, Pedro B.
  • Costa, Rubén D.
Bio-hybrid light-emitting diodes (Bio-HLEDs) based on color down-converting filters with fluorescent proteins (FPs) have achieved moderate efficiencies (50 lm/W) and stabilities (300 h) due to both thermal- and photo-degradation. Here, we present a significant enhancement in efficiency (~130 lm/W) and stability (>150 days) using a zero-thermal-quenching bio-phosphor design. This is achieved shielding the FP surface with a hydrophilic polymer allowing their homogenous integration into the network of a light-guiding and hydrophobic host polymer. We rationalize how the control of the mechanical and optical features of this bio-phosphor is paramount towards highly stable and efficient Bio-HLEDs, regardless of the operation conditions. This is validated by the relationships between the stiffness of the FP-polymer phosphor and the maximum temperature reached under device operation as well as the transmittance of the filters and device efficiency., A.E. and R.D.C. acknowledge the program “Ayudas para la atracción de talento investigador—Modalidad 1, of the Consejería de Educación, Juventud y Deporte— Comunidad de Madrid with reference number 2016-T1/IND-1463”. R.D.C. also acknowledges the Spanish MINECO for the Ramón y Cajal program (RYC-2016-20891), the Europa Excelencia program (ERC2019- 092825), and HYNANOSC (RTI2018-099504-A-C22), as well as the 2018 Leonardo Grant for Researchers and Cultural Creators from BBVA Foundation and the FOTOART-CM project funded by Madrid region under program P2018/NMT-4367. P.B.C. acknowledges financial support of the Ministry of Science, Innovation and Universities of Spain under the Beatriz Galindo Programme (MCIU-19-BEAGAL 18/0224). A.L.C. acknowledges the European Research Council ERC-CoG-648071-ProNANO, the Spanish Ministry of Economy and Competitiveness (BIO2016-77367-R), the Basque Government (Elkartek KK-2017/00008). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—Grant No. MDM-2017-0720 (CIC biomaGUNE). The project leading to these results has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 863170., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ethanol solvation of polymer residues in graphene solution-gated field effect transistors

  • Merino, Juan Pedro
  • Brosel-Oliu, Sergi
  • Rius, Gemma
  • Illa, Xavi
  • Vázquez Sulleiro, Manuel
  • Del Corro, Elena
  • Masvidal Codina, Eduard
  • Bonaccini Calia, Andrea
  • Garrido, Jose A.
  • Villa, Rosa
  • Guimerà-Brunet, Anton
  • Prato, Maurizio
  • Criado, Alejandro
  • Prats Alfonso, Elisabet
The persistence of photoresist residues from microfabrication procedures causes significant obstacles in the technological advancement of graphene-based electronic devices. These residues induce undesired chemical doping effects, diminish carrier mobility, and deteriorate the signal-to-noise ratio, making them critical in certain contexts, including sensing and electrical recording applications. In graphene solution-gated field-effect transistors (gSGFETs), the presence of polymer contaminants makes it difficult to perform precise electrical measurements, introducing response variability and calibration challenges. Given the absence of viable short to midterm alternatives to polymer-intensive microfabrication techniques, a postpatterning treatment involving THF and ethanol solvents was evaluated, with ethanol being the most effective, environmentally sustainable, and safe method for residue removal. Employing a comprehensive analysis with XPS, AFM, and Raman spectroscopy, together with electrical characterization, we investigated the influence of residual polymers on graphene surface properties and transistor functionality. Ethanol treatment exhibited a pronounced enhancement in gSGFET performance, as evidenced by a shift in the charge neutrality point and reduced dispersion. This systematic cleaning methodology holds the potential to improve the reproducibility and precision in the manufacturing of graphene devices. Particularly, by using ethanol for residue removal, we align our methodology with the principles of green chemistry, minimizing environmental impact while advancing diverse graphene technology applications., This work has made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MICINN and the ICTS NANBIOSIS, more specifically by the Micro-NanoTechnology Unit U8 of the CIBER-BBN. This research was funded by the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 881603 (GrapheneCore3) and No. 785219 (GrapheneCore2). We also acknowledge funding from the Generalitat de Catalunya (2021SGR00495 and 2021SGR001534). G.R. thanks the Ayuda RYC-2016-21412, and E.dC thanks the Ayuda RYC2019-027879-I founded by MCIU/AEI/10.13039/501100011033 and by El FSE invierte en tu futuro. E.M.-C. acknowledges Ayuda FJC2021-046601-I financiada por MCIU/AEI/10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR. This research was funded by the Spanish Ministerio de Ciencia e Innovación (PID2021-126117NA-I00, PID2020-113663RB-I00, PLEC2022-009232) founded by MCIU/AEI/10.13039/501100011033) and by “ERDF A way of making Europe”, also this work was funded by CIBER-BBN (CB06/01/0049). In addition, this work has been funded by PLEC2022-009232 funded by MCIU/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. The authors acknowledge the financial support provided by CIBER-BBN and the Instituto de Salud Carlos III with assistance from the European Regional Development. M.V.S. thanks Xunta de Galicia (ED481B-2023-126). A.C. acknowledges financial support by Grant ED431H 2020/17 funded by Xunta de Galicia, and by Grant RYC2020-030183-I funded by MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future”. Part of this work was performed under the Maria de Maeztu Units of Excellence Program grant MDM-2017-0720 funded by MCIN/AEI/10.13039/501100011033 and supported by the Severo Ochoa Centres of Excellence programme [SEV-2017-0706] and is currently supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, both funded by MCIN and MCIU/AEI/10.13039.501100011033. M.P. as recipient of the AXA Chair is grateful to AXA Chair in Nanobiotechnology supported by the AXA Research Fund., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Deciphering limitations to meet highly stable bio-hybrid light-emitting diodes

  • Fernández-Luna, Verónica
  • Sánchez-de Alcazar, Daniel
  • Fernández-Blázquez, Juan P.
  • Cortajarena, Aitziber L.
  • Coto, Pedro B.
  • Costa, Rubén D.
Color down-converting filters with fluorescent proteins (FPs) embedded in a polymer matrix have led to new bio-hybrid light-emitting diodes (Bio-HLEDs), featuring stabilities of 100 h and <1 min at low and high applied currents, respectively. Herein, the FP deactivation mechanism in Bio-HLEDs at high driving currents is deciphered. Primarily, the nonradiative energy relaxation of FPs upon excitation promotes the release of excess energy to the polymer matrix, reaching 60 °C and, in turn, a significant thermal emission quenching. This is circumvented by changing the device architecture, achieving stabilities of >300 h at high driving currents. Here, the photoinduced deactivation mechanism takes place, consisting of a slow and reversible partial dehydration followed by a quick and irreversible deactivation of the highly emissive ionic form. This is supported by steady-state/time-resolved emission, circular dichroism, and electrochemical impedance spectroscopic techniques. Overall, the limitations of Bio-HLEDs concerning matrix, buffers, device design, and FP stability are highlighted as key aspects to achieve efficient and stable devices., V.F.-L. and R.D.C. acknowledge the program “Ayudas para la atracción de talento investigador—Modalidad 1, of the Consejería de Educación, Juventud y Deporte—Comunidad de Madrid with reference number 2016-T1/IND-1463.” R.D.C. also acknowledges the Spanish MINECO for the Ramón y Cajal program (RYC-2016-20891), the Europa Excelencia program (ERC2019-092825), and HYNANOSC (RTI2018-099504-A-C22), as well as the 2018 Leonardo Grant for Researchers and Cultural Creators from BBVA Foundation and the FOTOART-CM project funded by Madrid region under programme P2018/NMT-4367. P.B.C. acknowledges financial support from the Regional Council for Industry and Employment of the Principality of Asturias, the European Regional Development Fund (ERDF), and the Spanish Ministry of Science, Innovation and Universities (PGC2018-095953-B-I00). A.L.C. acknowledges the European Research Council ERC-CoG-648071-ProNANO, the Spanish Ministry of Economy and Competitiveness (BIO2016-77367-R), and the Basque Government (Elkartek KK-2017/00008). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency—grant no. MDM-2017-0720 (CIC biomaGUNE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning the dimensionality of protein-peptide coassemblies to build 2D conductive nanomaterials

  • Pérez-Chirinos, Laura
  • Almonte, Lisa
  • Cortés-Ossa, Juan David
  • Solano, Eduardo
  • Calvo, M. Reyes
  • Sasselli, Ivan R.
  • Cortajarena, Aitziber L.
The natural self-assembly tendency of proteins to build complex structural architectures has kindled inspiration in developing supramolecular structures through the rational design of biomacromolecules. While there has been significant progress in achieving precise control over the morphology of self-assembled structures, combining different molecules within assemblies enables the design of materials with increased complexity, sophisticated structures, and a broad spectrum of functionalities. Here, the development of 1D and 2D peptide-protein coassembled systems based on the design of amphiphilic peptides and engineered proteins is described. The peptide was optimized to form stable self-assembled fibers by evaluating, computationally and experimentally, the assembling tendencies and the supramolecular features of peptides with different lengths and negative charges. A superhelical repeat protein was engineered by fusing one or two amphiphilic peptides into one or both termini. This modification drove the coassembly between the self-assembled fibers and the protein with one or two peptides, resulting in 1D or 2D coassembled systems. The protein films and the 2D coassembled system exhibited high ionic conductivity for a biomolecular system, attributed to their high content of charged residues, positioning these materials as promising candidates for developing bioelectronic devices. Thus, this work provides a versatile framework for developing coassembled materials with tunable dimensionality by using biocompatible building blocks without any additional chemical moieties, highlighting the potential for their use in biocompatible electronics., L.P.-C. and A.L.C. acknowledge financial support from the Spanish State Training Subprogram (PRE2019-090076), and the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (MDM-2017-0720). A.L.C. acknowledges support by the Spanish State Research Agency (grants PID2022-137977OB-I00 funded by MCIN/AEI/10.13039/501100011033) and the European Research Council-Grant (ERC-CoG-ProNANO-648071). A.L.C., M.R.C., L.A., and J.D.C.-O. acknowledge the Union’s Horizon 2020 FET Open under grant agreement No. 964593 (eProt). A.L.C. and M.R.C. acknowledge the Spanish MCIN (TED2021-131641B-C41, TED2021–131641B-C43 grants) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. M.R.C. acknowledges the Spanish MCIN (CNS2023-14515) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. I.R.S. acknowledges Ramon y Cajal Program (RYC2021-033294-I), Spanish State Research Agency (PID2022-136392NA-I00), and Gipuzkoa Foru Aldundia (Gipuzkoa Fellows Program, Diputación Foral de Gipuzkoa: 2019-FELL-000017-01). This work was performed under the Maria de Maeztu Units of Excellence Program Grant No. MDM-2017-0720 ministry of Science (CIC biomaGUNE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Peptide electrostatic modulation directs human neural cell fate

  • Pérez-Chirinos, Laura
  • Barceló, Xavier
  • Chiariello, M. Gabriella
  • Sanz, Irene
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Ortega, J. Alberto
  • Marrink, Siewert J.
  • Cortajarena, Aitziber L.
  • Álvarez, Zaida
  • Sasselli, Ivan R.
The data that support the findings of this study are available from the corresponding author upon reasonable request., Supramolecular self-assembled systems have emerged as versatile platforms for engineering biomimetic environments that precisely regulate cellular behavior. These materials have tunable properties such as stiffness, hydrophobicity, and molecular composition, allowing for customization of their structure and function. Despite significant advances, the specific role of electrostatic properties in modulating cellular responses within supramolecular assemblies remains poorly understood. Here, a peptide library with diverse electrostatic profiles is designed to systematically investigate their influence on the bioactivity of supramolecular assemblies for neural regeneration. Combining computational and experimental methods, the self-assembly conditions of these peptides are optimized to create stable, biologically relevant architectures. Using human neural progenitor cell (hNPC) cultures, it is demonstrated that negatively charged environments enhance cell survival and promote neuronal differentiation. Specifically, high negative charges activate critical signaling pathways, including the mitogen-activated protein kinase (MAPK) cascade and cell adhesion mechanisms, leading to neuronal lineage commitment. This study establishes a novel framework for the design of supramolecular systems, offering an unprecedented ability to analyze specific parameters in cell behavior. By achieving control beyond conventional biomaterials, this work provides valuable insights into the complex interplay of biophysical and biochemical cues in the native neural microenvironment, with implications for regenerative medicine and biomaterial design., The authors acknowledge the support of the following grants: Grants PID2022-137977OB-I00 (A.L.C.), TED2021-131641B-C41 (A.L.C.), PID2020-114407RA-I00 (J.A.O.), PID2021-124839OA-I00 (Z.A.), and PID2022-136392NA-I00 (I.R.S.), funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU; Grants CNS2023-144820 (J.A.O.), CNS2022-135407 (Z.A.), funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR; Grant ERC-CoG-ProNANO-648071 (A.L.C.), funded by European Research Council; Grant 964593 (eProt) (A.L.C.), funded by European Union's Horizon 2020 FET Open; Grant R01AG086270 (Z.A. and J.A.O.), funded by the National Institute on Aging of the National Institutes of Health (NIH); and Grant P199 (Z.A.), supported by the IRP Research Foundation. The authors acknowledge the support of fellowships and research programs: the Spanish State Training Subprogram PRE2019-090076 (L.P.C.) and EMBO Scientific Exchange Grant 10283 (L.P.C.), and Juan de la Cierva Program JDC2023-051798-I (X.B.) funded by MICIU/AEI/10.13039/501100011033 and “ESF+.” The authors acknowledge support from the Ramón y Cajal Program, RYC2020-028732-I (Z.A.), RYC2021-033294-I (I.R.S.), and RYC2019-026980-I (J.A.O.), and I.R.S. also acknowledges funding from the Gipuzkoa Foru Aldundia (Gipuzkoa Fellows Program, Diputación Foral de Gipuzkoa: 2019-FELL-000017-01). The authors also thank the IBEC Core Facility and Microscopy Characterization Facility, Unit 7 of ICTS “NANBIOSIS” from CIBER-BBN both at Institute for Bioengineering of Catalonia. Computational work was carried out at the HPC Clusters at the Donostia International Physics Center (DIPC). Mass spectrometry/Proteomics was performed at the IRB Barcelona Mass Spectrometry and Proteomics Core Facility, which is granted in the framework of the 2014-2020 ERDF Operational Programme in Catalonia, co-financed by the European Regional Development Fund (ERDF). Reference: IU16-015983. Institutional support was provided by Institute of Neurosciences—University of Barcelona as well as CIC biomaGUNE and IBEC which acknowledge the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (MDM-2017-0720) and the Centro de Excelencia Severo Ochoa (Grant CEX2023-001282-S, funded by MICIU/AEI/10.13039/501100011033), respectively., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001282-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Tuning the dimensionality of supramolecular functional materials based on the rational design of biomolecules, Modulando la dimensionalidad de materiales supramoleculares funcionales mediante el diseño racional de biomoléculas

  • Pérez-Chirinos, Laura
For the Degree of Doctor in Molecular Biology and Biomedicine at the University of the Basque Country., [ES] El autoensamblaje es un proceso natural y espontáneo que ocurre tanto en sistemas biológicos como no biológicos con el fin de formar estructuras complejas con alto nivel de organización. Las proteínas son uno de los principales ejemplos de moléculas biológicas que forman estructuras supramoleculares arquitectónicamente complejas a partir del autoensamblaje de moléculas individuales. Este proceso natural ha servido como inspiración para el desarrollo de estructuras supramoleculares mediante el diseño racional de biomacromoléculas con dicha capacidad de autoensamblaje. A pesar del alto control y conocimiento que existe sobre la morfología de las estructuras autoensambladas, la combinación de diferentes moléculas en los ensamblajes abre nuevas oportunidades para el desarrollo de materiales con una complejidad y versatilidad que no es posible adquirir en simples autoensamblajes. En este sentido, las estructuras supramoleculares coensambladas ofrecen unas ventajas excepcionales para el desarrollo de estructuras novedosas y complejas con un amplio espectro de posibles aplicaciones innovadoras. El desarrollo de estructuras supramoleculares mediante el diseño de secuencias peptídicas anfifílicas con capacidad de autoensamblaje es un tema de investigación ampliamente estudiado. La capacidad de controlar la estructura de estas moléculas permite el desarrollo de nanoestructuras supramoleculares con propiedades específicas y modificables. Actualmente hay distintas líneas de investigación centradas en este tipo de sistemas. Desde el punto de vista estructural, la predicción de la morfología y la topología de estas estructuras supramoleculares como resultado del diseño racional de secuencias moleculares sigue siendo un campo de investigación amplio y desafiante. Desde el punto de vista de la aplicación, se ha demostrado que estos sistemas tienen excepcionales propiedades como materiales bioactivos para su uso como matrices artificiales extracelulares en cultivos celulares e ingeniería de tejidos cuando se combinan con secuencias peptídicas bioactivas, donde las propiedades físicas y mecánicas de la parte estructural también juegan un papel fundamental. Además, se ha demostrado que estas estructuras supramoleculares presentan propiedades conductoras gracias a la presencia de residuos cargados y la deslocalización de electrones en residuos aromáticos apilados mediante interacciones π-π, posicionando a estos materiales como potenciales candidatos para la bioelectrónica. Las proteínas de repetición son excelentes candidatos para el diseño de estructuras robustas por sus características modulares que permiten la modificación de tamaño y morfología de estas moléculas según las necesidades. La familia de las proteínas tetratricopeptide repeat (TPR), incluye proteínas que se basan en un bloque estructural de repetición constituido por 34 aminoácidos que forman un motivo de repetición con una estructura de hélice alfa-hélice-hélice alfa. La repetición en tándem de estos bloques individuales forma proteínas de mayor tamaño con una estructura de superhélice. Mediante el análisis estadístico de todas las secuencias naturales de proteínas TPR, se diseñó la secuencia consenso (CTPR). De este análisis se observó que hay 8 aminoácidos por cada bloque individual de 34 aminoácidos que se mantienen altamente conservados entre todas las secuencias naturales, los cuales son responsables de mantener la estructura superhelicoidal característica de la familia de las proteínas TPR, mediante su participación en interacciones de empaquetamiento entre repeticiones. Como resultado de su modularidad, estas proteínas presentan propiedades intrínsecas de autoensamblaje mediante interacciones “cabeza – cola” y “lado – a – lado” entre las proteínas. Dicha modularidad junto con la tendencia de autoensamblaje han dado lugar al desarrollo de materiales basados en proteínas con una morfología y anisotropía específicas. Además, estos materiales han presentado propiedades conductoras incipientes, convirtiéndolos en candidatos prometedores para el desarrollo de materiales bioelectrónicos, entre otras aplicaciones. El objetivo principal presentado en esta tesis es el desarrollo de nanomateriales híbridos con dimensionalidades regulables basados en el coensamblaje de péptidos anfifílicos diseñados racionalmente, y proteínas modificadas para aplicaciones en bioelectrónica y cultivos celulares. El diseño de estos materiales híbridos se basa en el coensamblaje entre fibras peptídicas autoensambladas y proteínas CTPR con uno o dos péptidos fusionados a uno o ambos extremos terminales. El coensamblaje entre las fibras y la proteína CTPR fusionada a un péptido está diseñado para formar nanofibras híbridas unidimensionales (1D), mientras que el coensamblaje entre las fibras y la proteína CTPR fusionada a dos péptidos está diseñado para formar una malla híbrida bidimensional (2D). Esta tesis está dividida en cinco capítulos, presentando una visión general en el primer capítulo, el diseño racional de péptidos y proteínas en el segundo y tercer capítulos, el diseño y caracterización de los materiales híbridos en el cuarto capítulo, y el estudio de las propiedades conductoras y bioactivas de los diferentes sistemas en el quinto capítulo., [EN] Self-assembly is a natural, spontaneous process that appears in many biological and non-biological systems to form sophisticated, organized structures. Proteins are one of the primary examples of biological molecules that build supramolecular systems by self-assembling their individual molecules to obtain complex structural architectures. This natural process kindled inspiration in the development of supramolecular structures through the rational design of biomacromolecules. In spite of the high control over the morphology of self-assembled structures, the combination of different molecules within assemblies opens up new opportunities for the development of materials with increased complexity and versatility. In this sense, co-assembled supramolecular structures offer a challenging and compelling avenue for the design of novel, sophisticated structures with a broad spectrum of innovative functionalities. The design of amphiphile peptidic sequences that self-assemble into supramolecular structures has been thoroughly reported in the literature. The high control over the structure of these molecules permits the development of supramolecular nanostructures with precise and tunable properties and functions. The ongoing research involving these structures is focused on different research lines. From the structural point of view, predicting the morphology and topology of the supramolecular structures resulting from the design of the molecular sequences is still a challenging endeavor. From the application point of view, these structures have exhibited exceptional bioactive properties as artificial extracellular matrices for cell culture and tissue engineering when combined with bioactive peptide sequences, in which the physical and mechanical properties of the structural part also play a fundamental role. Additionally, these structures have demonstrated compelling conductive properties due to the presence of charged residues and the delocalization of electrons in π-stacked aromatic residues, positioning them as promising materials for bioelectronics. Repeat proteins are outstanding candidates for the design of robust protein scaffolds due to their modular features that allow their versatile tunability in size and morphology. The tetratricopeptide repeat (TPR) protein family encloses proteins that are based on a 34 amino acid helix-turn-helix structural building block that can be repeated in tandem arrays to form larger proteins with a superhelical fold. The consensus TPR sequence (CTPR) was designed based on the statistical analysis of natural TPR sequences. This analysis revealed that 8 residues within the 34 motif sequence were highly conserved among the natural TPR proteins. These residues are known to be responsible for preserving the superhelical TPR fold through their involvement in inter- and intra- repeat packing interactions. As a result of their modularity, CTPR proteins exhibit inherent self-assembling properties driven by “head-to-tail” and “side-to-side” interactions. This modularity and self-assembling properties have permitted the development of protein-based materials with controlled morphology and anisotropy. Moreover, these materials have also presented incipient conductive properties, making them promising candidates for the development of bioelectronic materials, among other applications. The main objective presented in this thesis is the development of hybrid nanomaterials with tunable dimensionalities based on the co-assembly of rationally designed amphiphilic peptides and engineered proteins for applications in bioelectronics and cell culture. The design of these hybrid materials is based on the co-assembly between self-assembled peptide fibers and CTPR proteins with one or two peptides fused to one or both termini of the proteins. The co-assembly between the fibers and the CTPR protein linked to one peptide is designed to form 1D hybrid nanofibers, whereas the co-assembly between fibers and the CTPR protein linked to two peptides is designed to form a 2D hybrid mesh. This thesis is divided into five chapters, presenting an overall overview in the first chapter, the peptide and protein rational design in the second and third chapters, the design and characterization of the hybrid materials in the fourth chapter, and the study of the conductive and bioactive properties of the different systems in the fifth chapter., The work presented in this thesis was funded by the Spanish State Training Subprogram PRE2019-090076, by the European Research Council ERC CoG-ProNANO-648071 Consolidator Grant, by the European Commission H2020 FET-OPEN 01-2018-2019-2020 project, by the EMBO Scientific Exchange Grant 10283 and performed under the Maria de Maeztu Units of Excellence Program Grant No. MDM-2017-0720 Ministry of Science, Innovation and Universities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering low-symmetry colloidal crystals with optical anisotropies

  • Lin, Haixin
  • Lee, Sangmin
  • Mkhitaryan, Vahagn
  • Sánchez-Iglesias, Ana
  • Grzelczak, Marek
  • Sun, Lin
  • Lee, Byeongdu
  • Wang, Shunzhi
  • Zhou, Wenjie
  • Van Duyne, Richard
  • Liz-Marzán, Luis Manuel
  • García de Abajo, Francisco Javier
  • Glotzer, Sharon C.
  • Mirkin, Chad A.
Lin et al., This work was supported by the following: Air Force Office of Scientific Research award FA9550-22-1-0300 (to C.A.M.); Spanish Ministry of Science and Innovation grant nos. PID2020-116627RB-C21 and PID2020-116627RB-C22 (to F.O., J.M.T., D.M.S., and V.F.M.); ERDF and the Galician Regional Government as part of the agreement for funding the Atlantic Research Center for Information and Communication Technologies (AtlanTTIC) (to F.O., J.M.T., D.M.S., and V.F.M.); ERDF and the Extremadura Regional Government grant nos. IB18073 and GR21072 (to F.O., J.M.T., D.M.S., and V.F.M.); Spanish Ministry of Universities under a María Zambrano Grant (to D.M.S.); European recovery Next Generation EU fund under project MS-26, RD 289/2021 Margarita Salas UEx (to V.F.M.); Spanish MICINN PID2024-157421NB-I00 and Severo Ochoa CEX2024-001490-S, and the Catalan CERCA Program (to F.J.G.d.A.); Spanish Ministry of Science and Innovation grant no. PID2020-117779R (to L.M.L.-M.); Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency grant no. MDM-2017-0720 (to L.M.L.-M.); and European Research Council (ERC) Synergy grant no. 101166855 CHIRAL-PRO (to L.M.L.-M.)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001490-S)., This work was supported as part of the Center for Bio-Inspired Energy Science, an Energy Frontier Research Center funded by the Department of Energy, Office of Science, Basic Energy Sciences under award no. DE-SC0000989 (for NP synthesis and theory and simulation). This work made use of the EPIC facility (NUANCE Center-Northwestern University), which has received support from the MRSEC program (NSF DMR-1121262) at the Materials Research Center, the International Institute for Nanotechnology (IIN), and the State of Illinois, through the IIN. This work used the Extreme Science and Engineering Discovery Environment (XSEDE) (64), which is supported by the National Science Foundation grant number ACI-1548562 and XSEDE award DMR 140129. Computational resources and services were also provided by Advanced Research Computing at the University of Michigan, Ann Arbor. This research used resources of the Advanced Photon Source, a US Department of Energy (DOE) Office of Science user facility at Argonne National Laboratory, and is based on research supported by the US DOE Office of Science-Basic Energy Sciences under contract no. DE-AC02-06CH11357., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Cu-Doped Extremely Small Iron Oxide Nanoparticles with Large Longitudinal Relaxivity: One-Pot Synthesis and in Vivo Targeted Molecular Imaging

  • Fernández-Barahona, I.
  • Gutiérrez, L.
  • Veintemillas-Verdaguer, S.
  • Pellico, J.
  • Morales, M.D.P.
  • Catala, M.
  • Del Pozo, M.A.
  • Ruiz-Cabello, J.
  • Herranz, F.
Synthesizing iron oxide nanoparticles for positive contrast in magnetic resonance imaging is the most promising approach to bring this nanomaterial back to the clinical field. The success of this approach depends on several aspects: the longitudinal relaxivity values, the complexity of the synthetic protocol, and the reproducibility of the synthesis. Here, we show our latest results on this goal. We have studied the effect of Cu doping on the physicochemical, magnetic, and relaxometric properties of iron oxide nanoparticles designed to provide positive contrast in magnetic resonance imaging. We have used a one-step, 10 min synthesis to produce nanoparticles with excellent colloidal stability. We have synthesized three different Cu-doped iron oxide nanoparticles showing modest to very large longitudinal relaxivity values. Finally, we have demonstrated the in vivo use of these kinds of nanoparticles both in angiography and targeted molecular imaging.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Structural basis for substrate specificity and catalysis of a1,6-fucosyltransferase

  • García-García, Ana
  • Ceballos-Laita, Laura
  • Serna, Sonia
  • Artschwager, Raik
  • Reichardt, Niels C.
  • Corzana, Francisco
  • Hurtado-Guerrero, Ramón
Core-fucosylation is an essential biological modification by which a fucose is transferred from GDP-ß-L-fucose to the innermost N-acetylglucosamine residue of N-linked glycans. A single human enzyme a1,6-fucosyltransferase (FUT8) is the only enzyme responsible for this modification via the addition of an a-1,6-linked fucose to N-glycans. To date, the details of substrate recognition and catalysis by FUT8 remain unknown. Here, we report the crystal structure of FUT8 complexed with GDP and a biantennary complex N-glycan (G0), which provides insight into both substrate recognition and catalysis. FUT8 follows an SN2 mechanism and deploys a series of loops and an a-helix which all contribute in forming the binding site. An exosite, formed by one of these loops and an SH3 domain, is responsible for the recognition of branched sugars, making contacts specifically to the a1,3 arm GlcNAc, a feature required for catalysis. This information serves as a framework for inhibitor design, and helps to assess its potential as a therapeutic target.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Cell identity and nucleo-mitochondrial genetic context modulate OXPHOS performance and determine somatic heteroplasmy dynamics

  • Lechuga-Vieco, A.V.
  • Latorre-Pellicer, A.
  • Johnston, I.G.
  • Prota, G.
  • Gileadi, U.
  • Justo-Méndez, R.
  • Acín-Pérez, R.
  • Martínez-de-Mena, R.
  • Fernández-Toro, J.M.
  • Jimenez-Blasco, D.
  • Mora, A.
  • Nicolás-Ávila, J.A.
  • Santiago, D.J.
  • Priori, S.G.
  • Bolaños, J.P.
  • Sabio, G.
  • Criado, L.M.
  • Ruíz-Cabello, J.
  • Cerundolo, V.
  • Jones, N.S.
  • Enríquez, J.A.
Heteroplasmy, multiple variants of mitochondrial DNA (mtDNA) in the same cytoplasm, may be naturally generated by mutations but is counteracted by a genetic mtDNA bottleneck during oocyte development. Engineered heteroplasmic mice with nonpathological mtDNA variants reveal a nonrandom tissue-specific mtDNA segregation pattern, with few tissues that do not show segregation. The driving force for this dynamic complex pattern has remained unexplained for decades, challenging our understanding of this fundamental biological problem and hindering clinical planning for inherited diseases. Here, we demonstrate that the nonrandom mtDNA segregation is an intracellular process based on organelle selection. This cell type-specific decision arises jointly from the impact of mtDNA haplotypes on the oxidative phosphorylation (OXPHOS) system and the cell metabolic requirements and is strongly sensitive to the nuclear context and to environmental cues.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Co-immobilization and Colocalization of Multi-Enzyme Systems for the Cell-Free Biosynthesis of Aminoalcohols

  • Velasco-Lozano, S.
  • Santiago-Arcos, J.
  • Mayoral, J.A.
  • López-Gallego, F.
The manufacturing of aminoalcohols is an appealing transformation for industrial biocatalysis due to their high value as building blocks in synthetic chemistry. By co-immobilizing dehydrogenases, ¿-transaminases and oxidases on porous carriers, we fabricated and characterized a multi-functional heterogeneous biocatalyst that was further applied to the cell-free biosynthesis of amines and aminoalcohols from alcohols and diols, respectively. This immobilized cascade integrates both redox cofactor and amine donor recycling systems into the amino alcohol biosynthesis. Spatial co-localization of the multi-enzyme system significantly increases the cofactor recycling efficiency, the system productivity and the product conversion. Using this multi-functional heterogeneous biocatalyst, we achieved 80 % conversion of alcohols into amines and accessed a palette of up to 5 aminoalcohols starting from their corresponding diols in one-pot. The results herein presented contribute to understanding the effects of the confinement of co-immobilized enzymes on the cascade processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Engineered protein-driven synthesis of tunable iron oxide nanoparticles as T1 and T2 magnetic resonance imaging contrast agents

  • Aires, Antonio
  • Fernández-Afonso, Yilian
  • Guedes, Gabriela
  • Guisasola, Eduardo
  • Gutiérrez, Lucía
  • Cortajarena, Aitziber L.
Iron oxide nanoparticles (IONPs) have become one of the most promising nanomaterials for biomedical applications because of their biocompatibility and physicochemical properties. This study demonstrates the use of protein engineering as a novel approach to design scaffolds for the tunable synthesis of ultrasmall IONPs. Rationally designed proteins, containing different number of metal-coordination sites, were evaluated to control the size and the physicochemical and magnetic properties of a set of protein-stabilized IONPs (Prot-IONPs). Prot-IONPs, synthesized through an optimized coprecipitation approach, presented good T1 and T2 relaxivity values, stability, and biocompatibility, showing potential for magnetic resonance imaging (MRI) applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Engineered repeat proteins as scaffolds to assemble multi-enzyme systems for efficient cell-free biosynthesis

  • Ledesma-Fernandez, Alba
  • Velasco-Lozano, Susana
  • Santiago-Arcos, Javier
  • López-Gallego, Fernando
  • Cortajarena, Aitziber L.
Multi-enzymatic cascades with enzymes arranged in close-proximity through a protein scaffold can trigger a substrate channeling effect, allowing for efficient cofactor reuse with industrial potential. However, precise nanometric organization of enzymes challenges the design of scaffolds. In this study, we create a nanometrically organized multi-enzymatic system exploiting engineered Tetrapeptide Repeat Affinity Proteins (TRAPs) as scaffolding for biocatalysis. We genetically fuse TRAP domains and program them to selectively and orthogonally recognize peptide-tags fused to enzymes, which upon binding form spatially organized metabolomes. In addition, the scaffold encodes binding sites to selectively and reversibly sequester reaction intermediates like cofactors via electrostatic interactions, increasing their local concentration and, consequently, the catalytic efficiency. This concept is demonstrated for the biosynthesis of amino acids and amines using up to three enzymes. Scaffolded multi-enzyme systems present up to 5-fold higher specific productivity than the non-scaffolded ones. In-depth analysis suggests that channeling of NADH cofactor between the assembled enzymes enhances the overall cascade throughput and the product yield. Moreover, we immobilize this biomolecular scaffold on solid supports, creating reusable heterogeneous multi-functional biocatalysts for consecutive operational batch cycles. Our results demonstrate the potential of TRAP-scaffolding systems as spatial-organizing tools to increase the efficiency of cell-free biosynthetic pathways.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Multienzyme coimmobilization on triheterofunctional supports

  • Santiago-Arcos, J.
  • Velasco-Lozano, S.
  • López-Gallego, F.
IImmobilized multienzyme systems are gaining momentum in applied biocatalysis; however, the coimmobilization of several enzymes on one carrier is still challenging. In this work, we exploited a heterofunctional support activated with three different chemical functionalities to immobilize a wide variety of different enzymes. This support is based on agarose microbeads activated with aldehyde, amino, and cobalt chelate moieties that allow a fast and irreversible immobilization of enzymes, enhancing the thermostability of most of the heterogeneous biocatalysts (up to 21-fold higher than the soluble one). Furthermore, this trifunctional support serves to efficiently coimmobilize a multienzyme system composed of an alcohol dehydrogenase, a reduced nicotinamide adenine dinucleotide (NADH) oxidase, and a catalase. The confined multienzymatic system demonstrates higher performance than its free counterpart, achieving a total turnover number (TTN) of 1 × 105 during five batch consecutive cycles. We envision this solid material as a platform for coimmobilizing multienzyme systems with enhanced properties to catalyze stepwise biotransformations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Self-Sufficient Heterogeneous Biocatalysis through Boronic Acid-Diol Complexation of Adenylated Cofactors

  • Diamanti, Eleftheria
  • Velasco-Lozano, Susana
  • Grajales-Hernández, Daniel
  • Orrego, Alejandro H.
  • Di Silvio, Desiré
  • Fraile, José María
  • López-Gallego, Fernando
Self-sufficient heterogeneous biocatalysts (ssHB) are promising candidates for implementing cofactor-dependent enzymes in chemical biomanufacturing. Most strategies for coimmobilizing cofactors with dehydrogenases on porous agarose microbeads involve the use of cationic polymers (i.e., polyethylenimine, PEI) that interact electrostatically with the phosphate groups of their corresponding phosphorylated cofactors. Although the latter is a powerful and versatile approach, ionic bonds are disrupted in biotransformations operating at a high ionic strength, where screening of bonded ions takes place. Harnessing the ribose groups present in adenylated cofactors, we immobilize a selection of these (NAD(P)H, NAD(P)+, FAD, and ATP) on agarose microbeads functionalized with boronic acid to establish reversible covalent bonds between the cis-diol of the ribose in the cofactor backbone and the boronic acid. To do so, we functionalize cobalt-activated porous agarose beads with boronic acid (AG-B/Co2+) for the coimmobilization of adenylated cofactors with the corresponding cofactor dependent His-tagged dehydrogenases. First, we demonstrate that the adenylated cofactor-support interactions are reversible but show resistance against high salt concentrations, overcoming the main limitation of the current self-sufficient heterogeneous biocatalysts. Then, we coimmobilized several His-tagged enzymes with their corresponding adenylated cofactors and investigated the functionality and stability of these ssHBs in reductive aminations performed under high ionic strength in both batch and flow reactors. As a result, we manage to reuse the immobilized enzymes and the cofactors 3.5 × 105 and 167 times, respectively. This work expands the usefulness of ssBHs for hitherto bioprocess regardless of the ionic strength of the media.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

HAP-Multitag, a PET and Positive MRI Contrast Nanotracer for the Longitudinal Characterization of Vascular Calcifications in Atherosclerosis

  • Pellico, J
  • Fernandez-Barahona, I
  • Ruiz-Cabello, J
  • Gutierrez, L
  • Munoz-Hernando, M
  • Sanchez-Guisado, MJ
  • Aiestaran-Zelaia, I
  • Martinez-Parra, L
  • Rodriguez, I
  • Bentzon, J
  • Herranz, F
Vascular microcalcifications are associated with atherosclerosis plaque instability and, therefore, to increased mortality. Because of this key role, several imaging probes have been developed for their in vivo identification. Among them, [F-18]FNa is the gold standard, showing a large uptake in the whole skeleton by positron emission tomography. Here, we push the field toward the combined anatomical and functional early characterization of atherosclerosis. For this, we have developed hydroxyapatite (HAP)-multitag, a bisphosphonatefunctionalized Ga-68 core-doped magnetic nanoparticle showing high affinity toward most common calcium salts present in microcalcifications, particularly HAP. We characterized this interaction in vitro and in vivo, showing a massive uptake in the atherosclerotic lesion identified by positron emission tomography (PET) and positive contrast magnetic resonance imaging (MRI). In addition, this accumulation was found to be dependent on the calcification progression, with a maximum uptake in the microcalcification stage. These results confirmed the ability of HAP-multitag to identify vascular calcifications by PET/(T-1)MRI during the vulnerable stages of the plaque progression.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

SERS monitoring of local pH in encapsulated therapeutic cells

  • Zhang, Y.
  • Gallego, I.
  • Plou, J.
  • Pedraz, J.L.
  • Liz-Marzán, L.M.
  • Ciriza, J.
  • García, I.
Microencapsulation of therapeutic cells has widely advanced toward the development of treatments for various diseases, in particular seeking the protection of cell transplants from immune rejection. However, several challenges in cell therapy remain due to the lack of suitable methods to monitor in vivo microcapsule tracking, microcapsule stability and/or altered cell viability and proliferation upon transplantation. We propose in this work the incorporation of contrast agents in microcapsules, which can be easily visualized by SERS imaging. By placing SERS probes in the alginate extracellular layer, a high contrast can be obtained with negligible toxicity. Specifically, we used a pH-sensitive SERS tracking probe consisting of gold nanostars encoded with a pH-sensitive Raman-active molecule, and protected by a layer of biocompatible polymer coating, grafted on the nanoparticles via electrostatic interactions. This nanomaterial is highly sensitive within the biologically relevant pH range, 5.5-7.8. We demonstrate that this SERS-based pH sensor can provide information about cell death of microencapsulated cells, in a non-invasive manner. As a result, we expect that this approach should provide a general strategy to study biological interactions at the microcapsule level. © 2021 The Royal Society of Chemistry.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Graphene, other carbon nanomaterials and the immune system, toward nanoimmunity-by-design

  • Gazzi, Arianna|||0000-0002-4142-485X
  • Fusco, Laura|||0000-0003-1418-507X
  • Orecchioni, Marco
  • Ferrari, Silvia
  • Franzoni, Giulia
  • Yan, J. Stephen
  • Rieckher, Matthias|||0000-0002-1945-9474
  • Peng, Guotao|||0000-0001-7169-9961
  • Lucherelli, Matteo Andrea|||0000-0003-1055-3269
  • Vacchi, Isabella Anna
  • Quyen Chau, Ngoc Do
  • Criado, Alejandro|||0000-0002-9732-513X
  • Istif, Akcan
  • Mancino, Donato
  • Dominguez, Antonio
  • Eckert, Hagen
  • Vázquez, Ester|||0000-0003-3223-8024
  • Da Ros, Tatiana|||0000-0003-1932-1560
  • Nicolussi, Paola
  • Palermo, Vincenzo|||0000-0002-0168-9693
  • Schumacher, Björn|||0000-0001-6097-5238
  • Cuniberti, Gianaurelio|||0000-0002-6574-7848
  • Mai, Yiyong
  • Clementi, Cecilia|||0000-0001-9221-2358
  • Pasquali, Matteo
  • Feng, Xinliang|||0000-0003-3885-2703
  • Kostarelos, Kostas|||0000-0002-2224-6672
  • Yilmazer, Acelya
  • Bedognetti, Davide
  • Fadeel, Bengt|||0000-0001-5559-8482
  • Prato, Maurizio|||0000-0002-8869-8612
  • Bianco, Alberto|||0000-0002-1090-296X
  • Delogu, Lucia Gemma|||0000-0002-2329-7260
Carbon-based materials (CBMs), such as graphene, nanodiamonds, carbon fibers, and carbon dots, have attracted a great deal scientific attention due to their potential as biomedical tools. Following exposure, particularly intravenous injection, these nanomaterials can be recognized by immune cells. Such interactions could be modulated by the different physicochemical properties of the materials (e.g. structure, size, and chemical functions), by either stimulating or suppressing the immune response. However, a harmonized cutting-edge approach for the classification of these materials based not only on their physicochemical parameters but also their immune properties has been missing. The European Commission-funded G-IMMUNOMICS and CARBO-IMmap projects aimed to fill this gap, developing a functional pipeline for the qualitative and quantitative immune characterization of graphene, graphene-related materials (GRMs), and other CBMs. The goal was to open breakthrough perspectives for the definition of the immune profiles of these materials. Here, we summarize our methodological approach, key results, and the necessary multidisciplinary expertise ranging across various fields, from material chemistry to engineering, immunology, toxicology, and systems biology. G-IMMUNOMICS, as a partnering project of the Graphene Flagship, the largest scientific research initiative on graphene worldwide, also complemented the studies performed in the Flagship on health and environmental impact of GRMs. Finally, we present the nanoimmunity-by-design concept, developed within the projects, which can be readily applied to other 2D materials. Overall, the G-IMMUNOMICS and CARBO-IMmap projects have provided new insights on the immune impact of GRMs and CBMs, thus laying the foundation for their safe use and future translation in medicine.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

MRI/Photoluminescence Dual-Modal Imaging Magnetic PLGA Nanocapsules for Theranostics

  • Zhang, Yajie|||0000-0003-1566-1007
  • García-Gabilondo, Miguel|||0000-0002-2015-2621
  • Rosell Novel, Anna|||0000-0003-1082-3599
  • Roig i Serra, Anna|||0000-0001-6464-7573
Developing multifunctional and biocompatible drug delivery nanoplatforms that integrate high drug loads and multiple imaging modalities avoiding cross-interferences is extremely challenging. Here we report on the successful chemical reaction of the high quantum yield biodegradable and photoluminescent polyester (BPLP) with the poly(lactic-co-glycolic acid) (PLGA) polymer to fabricate biocompatible photoluminescent nanocapsules (NCs). Furthermore, we transform the PLGA-BPLP NCs into a magnetic resonance (MR)/photoluminescence dual-modal imaging theranostic platform by incorporating superparamagnetic iron oxide nanoparticles (SPIONs) into the polymeric shell. In vitro phantoms confirmed the excellent MRI-r relaxivity values of the NCs whilst the cellular uptake of these NCs was clearly observed by fluorescence optical imaging. Besides, the NCs (mean size ~270 nm) were loaded with ~1 wt% of a model protein (BSA) and their PEGylation provided a more hydrophilic surface. The NCs show biocompatibility in vitro, as hCMEC/D3 endothelial cells viability was not affected for particle concentration up to 500 μg/mL. Interestingly, NCs decorated with SPIONs can be exploited for magnetic guiding and retention.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

N-Glycans in Immortalized Mesenchymal Stromal Cell-Derived Extracellular Vesicles Are Critical for EV-Cell Interaction and Functional Activation of Endothelial Cells

  • Clos Sansalvador, Marta|||0000-0001-8522-7818
  • Garcia, Sergio G.|||0000-0001-7698-3734
  • Font-Morón, Miriam|||0000-0002-4714-252X
  • Williams, Charles
  • Reichardt, Niels-Christian
  • Falcón-Pérez, Juan M.|||0000-0003-3133-0670
  • Bayés-Genís, Antoni|||0000-0002-3044-197X
  • Roura, Santiago|||0000-0003-4063-9661
  • Franquesa, Marcella|||0000-0002-1287-8908
  • Monguió-Tortajada, Marta|||0000-0003-2125-0810
  • Borràs i Serres, Francesc Enric|||0000-0003-4038-1912
Mesenchymal stromal cell-derived extracellular vesicles (MSC-EV) are widely considered as a cell-free therapeutic alternative to MSC cell administration, due to their immunomodulatory and regenerative properties. However, the interaction mechanisms between EV and target cells are not fully understood. The surface glycans could be key players in EV-cell communication, being specific molecular recognition patterns that are still little explored. In this study, we focused on the role of N-glycosylation of MSC-EV as mediators of MSC-EV and endothelial cells' interaction for subsequent EV uptake and the induction of cell migration and angiogenesis. For that, EV from immortalized Wharton's Jelly MSC (iWJ-MSC-EV) were isolated by size exclusion chromatography (SEC) and treated with the glycosidase PNGase-F in order to remove wild-type N-glycans. Then, CFSE-labelled iWJ-MSC-EV were tested in the context of in vitro capture, agarose-spot migration and matrigel-based tube formation assays, using HUVEC. As a result, we found that the N-glycosylation in iWJ-MSC-EV is critical for interaction with HUVEC cells. iWJ-MSC-EV were captured by HUVEC, stimulating their tube-like formation ability and promoting their recruitment. Conversely, the removal of N-glycans through PNGase-F treatment reduced all of these functional activities induced by native iWJ-MSC-EV. Finally, comparative lectin arrays of iWJ-MSC-EV and PNGase-F-treated iWJ-MSC-EV found marked differences in the surface glycosylation pattern, particularly in N-acetylglucosamine, mannose, and fucose-binding lectins. Taken together, our results highlight the importance of N-glycans in MSC-EV to permit EV-cell interactions and associated functions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hazard assessment of abraded thermoplastic composites reinforced with reduced graphene oxide

  • Chortarea, Savvina
  • Kuru, Ogul Can
  • Netkueakul, Woranan
  • Pelin, Marco
  • Keshavan, Sandeep
  • Song, Zhengmei
  • Ma, Baojin
  • Gómes, Julio
  • Villaro Abalos, Elvira
  • Visani de Luna, Luis Augusto
  • Loret, Thomas|||0000-0001-9171-9819
  • Fordham, Alexander|||0000-0002-9093-408X
  • Drummond, Matthew|||0000-0001-6804-1333
  • Kontis, Nikolaos
  • Anagnostopoulos, George
  • Paterakis, George
  • Cataldi, Pietro
  • Tubaro, Aurelia
  • Galiotis, Costas
  • Kinloch, Ian
  • Fadeel, Bengt|||0000-0001-5559-8482
  • Bussy, Cyrill|||0000-0001-8870-443X
  • Kostarelos, Kostas|||0000-0002-2224-6672
  • Buerki-Thurnherr, Tina
  • Prato, Maurizio|||0000-0002-8869-8612
  • Bianco, Alberto|||0000-0002-1090-296X
  • Wick, Peter
Graphene-related materials (GRMs) are subject to intensive investigations and considerable progress has been made in recent years in terms of safety assessment. However, limited information is available concerning the hazard potential of GRM-containing products such as graphene-reinforced composites. In the present study, we conducted a comprehensive investigation of the potential biological effects of particles released through an abrasion process from reduced graphene oxide (rGO)-reinforced composites of polyamide 6 (PA6), a widely used engineered thermoplastic polymer, in comparison to as-produced rGO. First, a panel of well-established in vitro models, representative of the immune system and possible target organs such as the lungs, the gut, and the skin, was applied. Limited responses to PA6-rGO exposure were found in the different in vitro models. Only as-produced rGO induced substantial adverse effects, in particular in macrophages. Since inhalation of airborne materials is a key occupational concern, we then sought to test whether the in vitro responses noted for these materials would translate into adverse effects in vivo. To this end, the response at 1, 7 and 28 days after a single pulmonary exposure was evaluated in mice. In agreement with the in vitro data, PA6-rGO induced a modest and transient pulmonary inflammation, resolved by day 28. In contrast, rGO induced a longer-lasting, albeit moderate inflammation that did not lead to tissue remodeling within 28 days. Taken together, the present study suggests a negligible impact on human health under acute exposure conditions of GRM fillers such as rGO when released from composites at doses expected at the workplace.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Single-Step Functionalization Strategy of Graphene Microtransistor Array with Chemically Modified Aptamers for Biosensing Applications

  • Brosel-Oliu, Sergi
  • Rius, Gemma|||0000-0003-0552-1043
  • Aviñó, Ana|||0000-0003-3047-738X
  • Nakatsuka, Nako
  • Illa, Xavi|||0000-0002-3212-1128
  • Del Corro, Elena|||0000-0001-6452-9139
  • Delgà-Fernández, Marta|||0000-0001-7434-8593
  • Masvidal Codina, Eduard|||0000-0002-9579-8603
  • Rodríguez, Natalia
  • Merino, Juan Pedro
  • Criado, Alejandro|||0000-0002-9732-513X
  • Prato, Maurizio|||0000-0002-8869-8612
  • Tkatchenko, Raphaela
  • Eritja, Ramon|||0000-0001-5383-9334
  • Godignon, Philippe
  • Garrido, Jose|||0000-0001-5621-1067
  • Villa, Rosa|||0000-0003-2735-3204
  • Guimerà, Anton
  • Prats-Alfonso, Elisabet
Graphene solution-gated field-effect transistors (gSGFETs) offer high potential for chemical and biochemical sensing applications. Among the current trends to improve this technology, the functionalization processes are gaining relevance for its crucial impact on biosensing performance. Previous efforts are focused on simplifying the attachment procedure from standard multi-step to single-step strategies, but they still suffer from overreaction, and impurity issues and are limited to a particular ligand. Herein, a novel strategy for single-step immobilization of chemically modified aptamers with fluorenylmethyl and acridine moieties, based on a straightforward synthetic route to overcome the aforementioned limitations is presented. This approach is benchmarked versus a standard multi-step strategy using thrombin as detection model. In order to assess the reliability of the functionalization strategies 48-gSGFETs arrays are employed to acquire large datasets with multiple replicas. Graphene surface characterization demonstrates robust and higher efficiency in the chemical coupling of the aptamers with the single-step strategy, while the electrical response evaluation validates the sensing capability, allowing to implement different alternatives for data analysis and reduce the sensing variability. In this work, a new tool capable of overcome the functionalization challenges of graphene surfaces is provided, paving the way toward the standardization of gSGFETs for biosensing purposes.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ethanol Solvation of Polymer Residues in Graphene Solution-Gated Field Effect Transistors

  • Merino, Juan Pedro
  • Brosel-Oliu, Sergi
  • Rius, Gemma|||0000-0003-0552-1043
  • Illa, Xavi|||0000-0002-3212-1128
  • Vázque Sulleiro, Manuel|||0000-0002-9688-7771
  • Del Corro, Elena|||0000-0001-6452-9139
  • Masvidal Codina, Eduard|||0000-0002-9579-8603
  • Bonaccini Calia, Andrea|||0000-0002-7873-4296
  • Garrido, Jose|||0000-0001-5621-1067
  • Villa, Rosa|||0000-0003-2735-3204
  • Guimerà-Brunet, Anton
  • Prato, Maurizio|||0000-0002-8869-8612
  • Criado, Alejandro|||0000-0002-9732-513X
  • Prats Alfonso, Elisabet|||0000-0002-7320-1896
The persistence of photoresist residues from microfabrication procedures causes significant obstacles in the technological advancement of graphene-based electronic devices. These residues induce undesired chemical doping effects, diminish carrier mobility, and deteriorate the signal-to-noise ratio, making them critical in certain contexts, including sensing and electrical recording applications. In graphene solution-gated field-effect transistors (gSGFETs), the presence of polymer contaminants makes it difficult to perform precise electrical measurements, introducing response variability and calibration challenges. Given the absence of viable short to midterm alternatives to polymer-intensive microfabrication techniques, a postpatterning treatment involving THF and ethanol solvents was evaluated, with ethanol being the most effective, environmentally sustainable, and safe method for residue removal. Employing a comprehensive analysis with XPS, AFM, and Raman spectroscopy, together with electrical characterization, we investigated the influence of residual polymers on graphene surface properties and transistor functionality. Ethanol treatment exhibited a pronounced enhancement in gSGFET performance, as evidenced by a shift in the charge neutrality point and reduced dispersion. This systematic cleaning methodology holds the potential to improve the reproducibility and precision in the manufacturing of graphene devices. Particularly, by using ethanol for residue removal, we align our methodology with the principles of green chemistry, minimizing environmental impact while advancing diverse graphene technology applications.