Skip to main content

ARQUITECTURAS FOTONICAS BASADAS EN DIELECTRICOS DE ALTO INDICE MEDIANTE TECNICAS DE FABRICACION NO CONVENCIONALES

PID2019-106860GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

High Q-Factor Plasmonic Surface Lattice Resonances in Colloidal Nanoparticle Arrays

  • Qi, Xiaoyu|||0009-0008-8677-7879
  • Pérez, Luis Alberto|||0000-0003-2802-4891
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Mihi, Agustín|||0000-0003-3821-7881
Surface lattice resonances (SLRs) sustained by ordered metal arrays are characterized by their narrow spectral features, remarkable quality factors, and the ability to tune their spectral properties based on the periodicity of the array. However, the majority of these structures are fabricated using classical lithographic processes or require postannealing steps at high temperatures to enhance the quality of the metal. These limitations hinder the widespread utilization of these periodic metal arrays in various applications. In this work, we use the scalable technique of template-assisted assembly of metal colloids to produce plasmonic supercrystals over centimeter areas capable of sustaining SLRs with high Q factors reaching up to 270. Our approach obviates the need for any postprocessing, offering a streamlined and efficient fabrication route. Furthermore, our method enables extensive tunability across the entire visible and near-infrared spectral ranges, empowering the design of tailored plasmonic resonant structures for a wide range of applications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydroxypropyl Cellulose Adhesives for Transfer Printing of Carbon Nanotubes and Metallic Nanostructures

  • Dore, Camilla
  • Dörling, Bernhard
  • García Pomar, Juan Luis
  • Campoy Quiles, Mariano
  • Mihi, Agustín
Transfer printing is one of the key nanofabrication techniques for the large‐scale manufacturing of complex device architectures. It provides a cost‐effective and high‐throughput route for the integration of independently processed materials into spatially tailored architectures. Furthermore, this method enables the fabrication of flexible and curvilinear devices, paving the way for the fabrication of a new generation of technologies for optics, electronics, and biomedicine. In this work, hydroxypropyl cellulose (HPC) membranes are used as water soluble adhesives for transfer printing processes with improved performance and versatility compared to conventional silicone alternatives. The high‐water solubility and excellent mechanical properties of HPC facilitate transfer printing with high yield for both metal and carbon nanotubes (CNTs) inks. In the case of metal inks, crack‐free stripping of silver films and the simple fabrication of Moiré Plasmonic architectures of different geometries are demonstrated. Furthermore, HPC membranes are used to transfer print carbon nanotube films with different thicknesses and up to 77% transparency in the visible and near infrared region with potential applications as transparent conductive substrates. Finally, the use of prepatterned HPC membranes enables nanoscale patterning of CNT with feature resolution down to 1 µm., This project received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 637116, ENLIGHTMENT and No. 648901) and the Generalitat de Catalunya program AGAUR 2017‐SGR‐00488. The Spanish Ministerio de Ciencia e Innovación is gratefully acknowledged for its support through Grant Nos. PGC2018‐095411‐B‐I00, PID2019‐106860GB‐I00, and SEV‐2015‐0496, in the framework of the Spanish Severo Ochoa Centre of Excellence program. This work was done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced Directional Light Extraction from Patterned Rare‐Earth Phosphor Films

  • Cabello-Olmo, Elena
  • Molet, Pau
  • Mihi, Agustín
  • Lozano, Gabriel
  • Míguez, Hernán
The combination of light‐emitting diodes (LEDs) and rare earth (RE) phosphors as color‐converting layers comprises the basis of solid‐state lighting. Indeed, most LED lamps include a photoluminescent coating made of phosphor material, i.e., crystalline matrix suitably doped with RE elements, to produce white light from a blue or ultraviolet LED chip. Transparent phosphor‐based films constitute starting materials for new refined emitters that allow different photonic designs to be implemented. Among the different photonic strategies typically employed to tune or enhance emission, surface texturing has proved its versatility and feasibility in a wide range of materials and devices. However, most of the nanofabrication techniques cannot be applied to RE phosphors directly because of their chemical stability or because of their cost. The first monolithic patterned structure of down‐shifting nanophosphors with square arrays of nanoholes with different lattice parameters is reported in this study. It is shown that a low‐cost soft‐nanolithography procedure can be applied to red‐emitting nanophosphors (GdVO4:Eu3+ nanocrystals) to tune their emission properties, attaining a twofold directional enhancement of the emitted light at predesigned emission wavelengths in specific directions., This project received funding from the Spanish Ministry of Economy and Competitiveness under grant MAT2017‐88584‐R (AEI/FEDER, UE) and PID2019‐106860GB‐I00 (AEI/FEDER, UE), the excellence program SEV‐2015‐0496, and the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (NANOPHOM, grant agreement no. 715832 and ENLIGHTMENT, grant no. 637116). P.M acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF and the UAB. E.C.O. acknowledges the Spanish Ministry of Universities for the funding through an FPU program (FPU19/00346)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Large-Scale Soft-Lithographic Patterning of Plasmonic Nanoparticles

  • Chiang, Naihao
  • Scarabelli, Leonardo
  • Vinnacombe-Willson, Gail A.
  • Pérez, Luis Alberto
  • Dore, Camilla
  • Mihi, Agustín
  • Jonas, Steven J.
  • Weiss, Paul S.
Micro- and nanoscale patterned monolayers of plasmonic nanoparticles were fabricated by combining concepts from colloidal chemistry, self-assembly, and subtractive soft lithography. Leveraging chemical interactions between the capping ligands of pre-synthesized gold colloids and a polydimethylsiloxane stamp, we demonstrated patterning gold nanoparticles over centimeter-scale areas with a variety of micro- and nanoscale geometries, including islands, lines, and chiral structures (e.g., square spirals). By successfully achieving nanoscale manipulation over a wide range of substrates and patterns, we established a powerful and straightforward strategy, nanoparticle chemical lift-off lithography (NP-CLL), for the economical and scalable fabrication of functional plasmonic materials with colloidal nanoparticles as building blocks, offering a transformative solution for designing next-generation plasmonic technologies., The authors would like to thank the Nanoquim clean room facility at ICMAB-CSIC and, in particular, Dr. Luigi Morrone for help with the use of the microwriter for master preparation. We acknowledge the CNSI-EICN, ICMAB-CSIC, and ICN2 electron microscopy facilities for TEM and SEM imaging, WiTEC for access to their microscopy instrumentation, and Dr. Thomas Young and Michael Mellody for the preparation of silicon masters. Special thanks to Dr. Leonora Velleman for the fruitful discussion on nanoparticle self-assembly. L.S. research is supported by the Marie Sklodowska-Curie Actions SHINE (H2020-MSCA-IF-2019, grant agreement No. 894847) and the 2020 Post-doctoral Junior Leader-Incoming Fellowship by “la Caixa” Foundation (ID 100010434, fellowship code LCF/BQ/PI20/11760028). L.A.P. thanks the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2018) for grant agreement No. 839402, PLASMIONICO. L.S., L.A.P., C.D., and A.M. acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 637116, ENLIGHTMENT). ICMAB acknowledges the Spanish Ministry of Economy and Competitiveness under grants PID2019-106860GB-I00 (AEI/FEDER, UE) and FUNFUTURE (CEX2019-000917-S) center of excellence Severo Ochoa program. This work has been performed in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona. N.C. thanks the NIH NIBIB Pathway to Independence Award (K99EB028325) for support. S.J.J. is supported by the NIH Common Fund through a NIH Director’s Early Independence Award co-funded by the National Institute of Dental and Craniofacial Research and Office of the Director, NIH Grant DP5OD028181. S.J.J. also acknowledges Young Investigator Award funds from the Alex’s Lemonade Stand Foundation for Childhood Cancer Research and the Hyundai Hope on Wheels Foundation for Pediatric Cancer Research. P.S.W. thanks the National Science Foundation (2004238) for support of this work. Funds for core facility use were provided via a support voucher awarded to N.C. and S.J.J. via the UCLA Clinical and Translational Science Institute (CTSI) Core Voucher Program, which is administered through Grant Number UL1TR001881., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mechanically Tunable Lattice-Plasmon Resonances by Templated Self-Assembled Superlattices for Multi-Wavelength Surface-Enhanced Raman Spectroscopy

  • Charconnet, Mathias
  • Kuttner, Christian
  • Plou, Javier
  • García Pomar, Juan Luis
  • Mihi, Agustín
  • Liz-Marzán, Luis Manuel
  • Seifert, Andreas
Lattice plasmons, i.e., diffractively coupled localized surface plasmon resonances, occur in long-range ordered plasmonic nanostructures such as 1D and 2D periodic lattices. Such far-field coupled resonances can be employed for ultrasensitive surface-enhanced Raman spectroscopy (SERS), provided they are spectrally matched to the excitation wavelength. The spectral positions of lattice plasmon modes critically depend on the lattice period and uniformity, owing to their pronounced sensitivity to structural disorder. We report the fabrication of superlattices by templated self-assembly of gold nanoparticles on a flexible support, with tunable lattice-plasmon resonances by means of macroscopic strain. We demonstrate that the highest SERS performance is achieved by matching the lattice plasmon mode to the excitation wavelength, by post-assembly fine-tuning of long-range structural parameters. Both asymmetric and symmetric lattice deformations can be used to adapt a single lattice structure to both red-shifted and blue-shifted excitation lines, as exemplified by lattice expansion and contraction, respectively. This proof-of-principle study represents a basis for alternative designs of adaptive functional nanostructures with mechanically tunable lattice resonances using strain as a macroscopic control parameter., M.C. and C.K. contributed equally to this work. This work was supported by the Spanish Ministry of Economy, Industry, and Competitiveness under the Maria de Maeztu and Severo Ochoa Units of Excellence Programme – MDM-2016-0618, MDM-2017-0720, and FUNFUTURE (No. CEX2019-000917-S); by the Basque Government in the Elkartek Program 2020/21; by the Spanish Ministerio de Ciencia e Innovación (No. PID2019-106860GB-I00); by the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant Agreement No. 799393 (NANOBIOME); Marie Skłodowska-Curie grant agreement no. 840064 (2D_PHOT); and by the European Research Council (ERC-AdG-2017 No. 787510, 4DbioSERS). The authors thank Dr. Judith Langer for scientific discussions and Eneko Lopez for the design and additive manufacturing of the 2D stretching device., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering Plasmonic Colloidal Meta-Molecules for Tunable Photonic Supercrystals

  • Molet, Pau
  • Passarelli, Nicolás
  • Pérez, Luis Alberto
  • Scarabelli, Leonardo
  • Mihi, Agustín
Ordered arrays of metal nanoparticles offer new opportunities to engineer light–matter interactions through the hybridization of Rayleigh anomalies and localized surface plasmons. The generated surface lattice resonances exhibit much higher quality factors compared to those observed in isolated metal nanostructures. Template-induced colloidal self-assembly has already shown a great potential for the scalable fabrication of 2D plasmonic meta-molecule arrays, but the experimental challenge of controlling optical losses within the repeating units has so far prevented this approach to compete with more standard fabrication methods in the production of high-quality factor resonances. In this manuscript, the optical properties of plasmonic arrays are investigated by varying the lattice parameter (between 200 and 600 nm) as well as the diameter of the gold colloidal building-blocks (between 11 ± 1 and 98 ± 6 nm). It is systematically studied how the internal architecture of the repeating gold-nanoparticle meta-molecules influences the optical response of the plasmonic supercrystals. Combining both experimental measurements and simulations, it is demonstrated how, reducing the size of the gold nanoparticles it is possible to switch from strong near-field plasmonic architectures to high-quality factors (>60) for lattice plasmon resonances located in the visible spectral range., P.M. and N.P. contributed equally to this work. This project had received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no. 637116, ENLIGHTMENT) and the Spanish Ministerio de Ciencia e Innovación through grant, PID2019-106860GB-I00 and FUNFUTURE (CEX2019-000917-S), in the framework of the Spanish Severo Ochoa Centre of Excellence program. L.S. research was supported by the Marie Sklodowska-Curie Actions SHINE (H2020- MSCA-IF-2019, grant agreement no. 894847) and the 2020 Post-doctoral Junior Leader-Incoming Fellowship by “la Caixa” Foundation (ID 100010434, fellow-ship code LCF/BQ/PI20/11760028). L.A.P. thanks the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2018) for grant agreement no. 839402, PLASMIONICO. P.M. acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF and the UAB under the auspices of the UAB material science doctoral program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magneto-ionic suppression of magnetic vortices

  • Chen, Yu
  • Nicolenco, Aliona
  • Molet, Pau
  • Mihi, Agustín
  • Pellicer, Eva
  • Sort, Jordi
Magneto-ionics refers to the non-volatile control of the magnetic properties of materials by voltage-driven ion migration. This phenomenon constitutes one of the most important magnetoelectric mechanisms and, so far, it has been employed to modify the magnetic easy axis of thin films, their coercivity or their net magnetization. Herein, a novel magneto-ionic effect is demonstrated: the transition from vortex to coherent rotation states, caused by voltage-induced ion motion, in arrays of patterned nanopillars. Electrolyte-gated Co/GdOx bilayered nanopillars are chosen as a model system. Electron microscopy observations reveal that, upon voltage application, oxygen ions diffuse from GdOx to Co, resulting in the development of paramagnetic oxide phases (CoOx) along sporadic diffusion channels. This breaks up the initial magnetization configuration of the ferromagnetic pillars (i.e., vortex states) and leads to the formation of small ferromagnetic nanoclusters, embedded in the CoOx matrix, which behave as single-domain nanoparticles. As a result, a decrease of the net magnetic moment is observed, together with a drastic change in the shape of the hysteresis loop. Micromagnetic simulations are used to interpret these findings. These results pave the way towards a new potential application of magnetoelectricity: the magneto-ionic control of magnetic vortex states., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement Nº 892661– MAGNUS. Financial support by the European Research Council (MAGIC-SWITCH 2019-Proof of Concept Grant (Nº 875018)), the Spanish Ministerio de Ciencia e Innovación through grants, MAT2017-86357-C3-1-R, PID2019-106860GB-I00 and The Spanish Severo Ochoa Centre of Excellence program FUNFUTURE (CEX2019-000917-S as well as associated FEDER. The Generalitat de Catalunya (2017-SGR-292 and 2018-LLAV-00032) is also acknowledged. P.M acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF and the UAB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced Photoluminescence of Cesium Lead Halide Perovskites by Quasi-3D Photonic Crystals

  • Mendoza Carreño, José
  • Passarelli, Nicolás
  • Otero, Clara
  • Polaravapu, Lakshminarayana
  • Pérez, Luis Alberto
  • Reparaz, J. Sebastian
  • Alonso Carmona, M. Isabel
  • Mihi, Agustín
Cesium lead halide perovskite nanocrystals have emerged as one of the most promising candidates for manufacturing portable lasers and light sources. In order to harness and exploit their photoluminescence more effectively, the nanocrystals are often accompanied by a photonic scheme that improves light emission. In this work, one introduces a quasi-3D photonic crystal composed of a 2D-grating on top of a distributed Bragg reflector (DBR) that provides a greater photoluminescence enhancement than the isolated architectures alone. The quasi-3D photonic crystals support both Rayleigh-Wood anomalies and guided modes that populate the photonic bandgap of the Bragg mirror, all of them capable of enhancing the outcoupling of light from the emitting layer. In order to demonstrate the benefits of the quasi-3D system, one prepares 2D-gratings, DBRs, and quasi-3D photonic crystals covered with metal halide perovskite nanocrystals and studies the photoluminescence enhancement produced in each case. Interestingly, the quasi-3D structure exhibits a photoluminescence enhancement of 16 times and an increase in spontaneous emission rate, greatly exceeding the values observed for the separate components., This project was received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 637116, Enlightment), the Generalitat de Catalunya (2017-SGR-00488), and the Spanish Ministerio de Ciencia e Innovación through grants PID2019-106860GB-I00, PID2020-119777GB-I00 and CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program. L.P. acknowledges the support from the Spanish Ministerio de Ciencia e Innovación through Ramón y Cajal grant (RYC2018-026103-I). J.M.C. acknowledges an FPI fellowship (PRE2020-09411) from MICINN cofinanced by the European Social Fund and the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient infrared sunlight absorbers based on gold-covered, inverted silicon pyramid arrays

  • Hu, Jinhui
  • Pérez, Luis Alberto
  • García Pomar, Juan Luis
  • Mihi, Agustín
  • Garriga Bacardi, Miquel
  • Alonso Carmona, M. Isabel
  • Goñi, Alejandro R.
The transparency of silicon in the infrared region enables the design of nano/microstructures for implementation in devices to harvest the infrared (IR) part of the solar spectrum. Herein we report a strategy that uses arrays of inverted silicon pyramids covered with a thin gold film, which exhibit substantial light absorption in the infrared spectral range (below the gap of Si). The absorption stems from the resonant excitation at infrared wavelengths of surface-plasmon polaritons at the metal/dielectric interface mainly by tuning size and separation of the inverted pyramids. The array-parameter optimization proceeded by iteration of the calculation and measurement of the infrared response using finite difference time-domain simulations and Fourier-transform IR spectroscopy, respectively. We analyse the calculated near-field distributions specifically looking for the presence of hot spots, i.e. nano-sized regions of very high concentration of the electronic charge and strong electromagnetic field enhancement, and discuss their potential for hot-electron generation. We show two fabrication routes for this kind of metal/silicon metamaterial either by photolithography or scalable nanoimprint techniques for a seamless integration in optoelectronic fabrication processes., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Individual Fellowship (MGA MSCA-IF) grant agreement No. 839402 (PLASMIONICO). The Spanish “Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033/)” is gratefully acknowledged for its support through grants SEV-2015-0496 (FUNMAT) and CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grant PGC2018-095411-B-100 (RAINBOW) and PID2019-106860GB-I00 (HIGHN). The authors also thank the Catalan agency AGAUR for grant 2017-SGR-00488. JLG-P acknowledges support of MSCA-IF fellowship grant agreement No. 840064 (2D_PHOT); JH acknowledges a fellowship from the China Scholarship Council (CSC) and the PhD program in Materials Science from Universitat Autònoma de Barcelona in which he is enrolled., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pre- and post-assembly modifications of colloidal plasmonic arrays: the effect of size distribution, composition and annealing

  • Colomer Ferrer, Oriol
  • Toda Cosi, Serni
  • Conti, Ylli
  • Medina Quiroz, David
  • Scarabelli, Leonardo
  • Mihi, Agustín
Templated self-assembly has emerged as one of the most versatile approaches for the fabrication of plasmonic ordered arrays composed of colloidal nanoparticle clusters, representing a valid alternative to top-down lithography for the scalable and low-cost production of this type of plasmonic substrates. Templated self-assembly can be applied to a variety of materials, solvents, and colloidal size, shape, and composition. A higher degree of control over the preparation of the colloids and their assembly would enable the rational modification of the internal composition and architecture of the repeating units of the array, targeting specific properties and applications. In this work, we explored both pre- and post-assembly modifications of the plasmonic system, analyzing their effect on the resulting collective optical properties. Combining both gold nanoparticles of different sizes and mixtures of gold and silver colloids, we demonstrated the possibility of leveraging near- and far-field coupling to control the optical losses of the system. Moreover, we explored the application of a thermal annealing step to induce the sintering of the colloidal building blocks within the plasmonic clusters. At lower temperatures (300 °C), the resulting single plasmonic objects are characterized by an inhomogeneous elemental distribution, while atomic migration and formation of alloys is triggered at higher temperatures (450 °C). By systematically analyzing the effect of the annealing we show an improvement in lattice plasmonic resonance quality factor of a gold nanoparticle array by 20%, without compromising its characteristic chemical and physical stability. Collectively, our results establish intriguing directions for the preparation of plasmonic arrays where the repeating unit can be engineered either before or after the assembly targeting specific catalytic, optical or magnetic properties., The authors would like to thank Marta Gerbolés Gibert and the Nanoquim cleanroom facility at the Institute of Materials science of Barcelona (ICMAB-CSIC) for their support with the rapid thermal annealing experiments and Marcos Rosado Iglesias for the assistance during the advanced electron microscopy and energy dispersive X-ray spectroscopy measurements conducted at the Catalan Institute of Nanoscience and Nanotechnology (ICN2). This project had received funding from the Spanish Ministerio de Ciencia e Innovación through grant, PID2019-106860GB-I00 and FUNFUTURE (CEX2019-000917-S), in the framework of the Spanish Severo Ochoa Centre of Excellence program. L. S. and Y. C. research is supported by the 2020 Post-doctoral Junior Leader-Incoming Fellowship by “la Caixa” Foundation (ID 100010434, fellow-ship code LCF/BQ/PI20/11760028). O. C. F. was supported by a JAE-INTRO fellowship from the Spanish Ministerio de Ciencia e Innovación (JAEINT21_EX0577). Y. C. acknowledges financial support from the UAB under the auspices of the UAB material science doctoral program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface Lattice Plasmon Resonances by Direct In Situ Substrate Growth of Gold Nanoparticles in Ordered Arrays

  • Vinnacombe-Willson, Gail A
  • Conti, Ylli
  • Jonas, Steven J
  • Weiss, Paul S
  • Mihi, Agustín
  • Scarabelli, Leonardo
Precise arrangements of plasmonic nanoparticles on substrates are important for designing optoelectronics, sensors and metamaterials with rational electronic, optical and magnetic properties. Bottom-up synthesis offers unmatched control over morphology and optical response of individual plasmonic building blocks. Usually, the incorporation of nanoparticles made by bottom-up wet chemistry starts from batch synthesis of colloids, which requires time-consuming and hard-to-scale steps like ligand exchange and self-assembly. Herein, an unconventional bottom-up wet-chemical synthetic approach for producing gold nanoparticle ordered arrays is developed. Water-processable hydroxypropyl cellulose stencils facilitate the patterning of a reductant chemical ink on which nanoparticle growth selectively occurs. Arrays exhibiting lattice plasmon resonances in the visible region and near infrared (quality factors of >20) are produced following a rapid synthetic step (<10 min), all without cleanroom fabrication, specialized equipment, or self-assembly, constituting a major step forward in establishing in situ growth approaches. Further, the technical capabilities of this method through modulation of the particle size, shape, and array spacings directly on the substrate are demonstrated. Ultimately, establishing a fundamental understanding of in situ growth has the potential to inform the fabrication of plasmonic materials; opening the door for in situ growth fabrication of waveguides, lasing platforms, and plasmonic sensors., The authors thank Camilla Dore for her advice and contributed expertise on the fabrication of HPC films. The authors extend their gratitude to Jose Mendoza Carreño for his assistance with the optical characterization of the gold nanoparticle arrays. This project had received funding from the Spanish Ministry of Science and Innovation through grants FUNFUTURE (CEX2019-000917-S), (FUNFUTURE, in the framework of the Spanish Severo Ochoa Centre of Excellence program) and PID2019-106860GB-I00 (HIGHN). L.S. and A.M. thank the Spanish National Research Council (CSIC) for funding via the I-LINK 2020 international travel grant, which facilitated international exchange period necessary for completion of this work. L.S. and Y.C. research is supported by the 2020 Post-doctoral Junior Leader-Incoming Fellowship by “la Caixa” Foundation (ID 100010434, fellow-ship code LCF/BQ/PI20/11760028). Y.C. acknowledges the auspices of the UAB material science doctoral program. G.A.V.W. thanks the UCLA graduate division for funding through the University of California Office of the President Dissertation Year Fellowship. S.J.J. acknowledges support from the National Institutes of Health (NIH) Common Fund through a NIH Director's Early Independence Award co-funded by the National Institute of Dental and Craniofacial Research and Office of the Director, NIH Grant DP5OD028181. S.J.J. and G.A.V.W. acknowledge support through a Scholar Award from the Hyundai Hope on Wheels Foundation for Pediatric Cancer Research. P.S.W. thanks the National Science Foundation for support through Grant #CHE-2004238., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advanced Optical Characterization of PEDOT:PSS by Combining Spectroscopic Ellipsometry and Raman Scattering

  • Kong, Minghua
  • Garriga Bacardi, Miquel
  • Reparaz, J. Sebastian
  • Alonso, Maria Isabel
The optical properties of various PEDOT:PSS films obtained by drop casting and blade coating are analyzed by variable-angle spectroscopic ellipsometry in the visible-UV spectral range. We discuss observed differences in the optical spectra due to PSS content and DMSO treatment and correlate them to structural changes extracted from Raman measurements. In particular, we investigate the optical anisotropy of the complex refractive indices which arises from the in-plane arrangement of the PEDOT backbones, giving rise to optically uniaxial behavior with the optic axis perpendicular to the film plane. Although this is widely accepted, most investigations disregard the anisotropy for simplicity, which sometimes leads to inaccurate conclusions. In this work, we compare the results of isotropic and anisotropic analyses to clarify which kind of errors we can expect if anisotropy is not considered. Finally, the correlation between Raman scattering and ellipsometric analyses shows that not only local structural changes of the chain conformation but also the overall morphology of the composite films are significant in the interpretation of Raman spectra., The authors acknowledge funding from the Spanish Ministerio de Ciencia e Innovación (MICINN) through grants PID2019-106860GB-I00 and PID2020-119777GB-I00 and the Spanish Severo Ochoa Centre of Excellence program CEX2019-000917-S, as well as AGAUR, Generalitat de Catalunya, grant 2017-SGR-00488. M.K. is grateful to the UAB PhD program in Materials Science in which she is enrolled and the China Scholarship Council for funding (CSC 201809370071). We thank Agustín Mihi and Mariano Campoy-Quiles for their constant support and ideas., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Energy-dependent dielectric tensor axes in monoclinic -3,4,9,10-perylene tetracarboxylic dianhydride

  • Alonso Carmona, M. Isabel
  • Garriga Bacardi, Miquel
  • Ossó, J. Oriol
  • Schreiber, Frank
  • Scholz, Reinhard
We have determined the complex dielectric tensor of single crystalline 3,4,9,10-perylene tetracarboxylic dianhydride (𝛼-PTCDA) as a function of energy in the range between 1.4 and 5.0 eV. The results obtained reflect the monoclinic symmetry of the crystal: The principal axes of the real and the imaginary part of the tensor in general do not coincide and show chromatic dispersion. Monoclinic behavior allows rotation of the components 𝜀𝑋 and 𝜀𝑍 in the plane perpendicular to the unique symmetry axis 𝑌 . The experimental results indicate that the energies of the optical transitions observed in the weak 𝜀𝑋 component coincide with energies in which a resonance effect due to coupling with the stronger 𝜀𝑍 component occurs. These resonances appear at energies close to electronic excitations such as the optical gap, the transport gap and the highest occupied molecular orbital–lowest unoccupied molecular orbital (HOMO–LUMO) peak-to-peak gap and their assignments are discussed based on theoretical calculations, We dedicate this paper to the memory of Norbert Karl and Manuel Cardona who encouraged this work in its beginnings. MIA and MG acknowledge funding by the Spanish Ministerio de Ciencia e Innovación (MICINN) through grants PID2019-106860GB-I00 (highN) and CEX2019-000917-S (FUNFUTURE, in the framework of the Spanish Severo Ochoa Centre of Excellence program), as well as AGAUR, Spain for grant 2017-SGR-00488. FS and RS wish to acknowledge financial support from the DFG, Germany ., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoimprinted 2D-chiral Perovskite Nanocrystal Metasurfaces for Circularly Polarized Photoluminescence

  • Mendoza Carreño, José
  • Molet, Pau
  • Otero Martínez, Clara
  • Alonso Carmona, M. Isabel
  • Polavarapu, Lakshminarayana
  • Mihi, Agustín
The versatile hybrid perovskite nanocrystals are one of the most promising materials for optoelectronics in virtue of their tunable bandgaps and high photoluminescence quantum yields. However, their inherent crystalline chemical structure limits the chiroptical properties achievable with the material. The production of chiral perovskites has become an active field of research for its promising applications in optics, chemistry or biology. Typically, chiral halide perovskites are obtained by the incorporation of different chiral moieties in the material. Unfortunately, these chemically modified perovskites have demonstrated moderate values of chiral photoluminescence so far. Here we introduce a general and scalable approach to produce chiral photoluminescence from arbitrary nano-emitters assembled into 2D-chiral metasurfaces. The fabrication via nanoimprinting lithography employs elastomeric molds engraved with chiral motifs covering millimeter areas that are used to pattern two types of unmodified colloidal perovskite nanocrystal inks: green-emissive CsPbBr3 and red-emissive CsPbBr1 I2 . The perovskite 2D-metasurfaces exhibit remarkable photoluminescence dissymmetry factors (glum ) of 0.16 that can be further improved up to glum of 0.3 by adding a high refractive index coating on the metasurfaces. This scalable approach to produce chiral photoluminescent thin films paves the way for the seamless production of bright chiral light sources for upcoming optoelectronic applications. This article is protected by copyright. All rights reserved., JMCand PMcontributed equally to this work. This project has received funding (AEI/FEDER,-UE) from the Spanish Ministerio de Ciencia e Innovación through grants PID2019-106860GB-I00/AEI/10.13039/501100011033(HIGHN), and CEX2019-000917-S (FUNFUTURE, Spanish Severo Ochoa Centre of Excellence program) and from the Generalitat de Catalunya (2017-SGR-00488). This research was also supported by the EIC PATHFINDER OPEN project 101046489 (DYNAMO), funded by the European Union.JMC and PM acknowledge FPI fellowships (PRE2020-09411and BES2017-080150) from MICINN cofinanced by the European Social Fund and the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona. L.P. acknowledges support from the Spanish Ministerio de Ciencia e Innovación through Ramón y Cajal grant (RYC2018-026103-I) and the Spanish State Research Agency (Grant PID2020-117371RA-I00) and a grant from the Xunta de Galicia (ED431F2021/05)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Colloidal Silver Nanoparticle Plasmonic Arrays for Versatile Lasing Architectures via Template-Assisted Self-Assembly

  • Conti, Ylli
  • Passarelli, Nicolás
  • Mendoza Carreño, José
  • Scarabelli, Leonardo
  • Mihi, Agustín
The characteristic narrow spectral features of surface lattice resonances emerge as great candidates for the rational design of optical nanocavities targeting enhanced light-matter interaction, ultrasensitive detection, or efficient light-energy conversion. Traditional fabrication of metal arrays involves thermal evaporation and annealing steps, limiting scalability and adaptability. In contrast, template-assisted self-assembly provides a high-throughput all-around approach for implementing colloidal plasmonic metasurfaces on a variety of different materials. Here, the use of pre-synthesized silver nanoparticles is designed and tested for the construction of versatile lasing architectures. Plasmonic arrays are prepared directly on top of the gain media (a photoresist thin film doped with Rhodamine B), creating optical nanocavities with quality factors as high as 85. The proposed architecture circumvents the need for an index-matching superstrate to promote the generation of collective resonances, leaving the plasmonic surface accessible for post-assembly modification. Additionally, the angular dispersion of the metasurfaces is used to modify the angle of the lasing emission, achieving both normal and off-normal lasing upon modification of the lattice parameter of the array. The results demonstrate how state-of-the-art colloidal self-assembly techniques offer a scalable and versatile alternative for the fabrication of plasmonic and photonic devices targeting advanced and non-linear optical phenomena., The authors would like to thank Dr. Martí Gibert Roca for his help in the realization of the optical setup and the dedicated software, as well as Dr. Sebastián Reparaz and Kai Xu for their assistance in the lifetime measurements. Y.C. acknowledges the auspices of the UAB material science doctoral program. This project received funding from the Spanish Ministerio de Ciencia e Innovación through grants, PDC2021-121475-I00/AEI/10.13039/501100011033 by the “European Union” NextGenerationEU/PRTR, PID2019-106860GB-I00/AEI/10.13039/501100011033 and FUNFUTURE (CEX2019-000917-S), in the framework of the Spanish Severo Ochoa Centre of Excellence program. L.S. and Y.C.'s research is supported by the 2020 Post-doctoral Junior Leader-Incoming Fellowship by “La Caixa” Foundation (ID 100010434, fellowship code LCF/BQ/PI20/11760028), and from a 2022 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning of Ultra-Thin Gold Films by Photoreduction

  • Martínez Cercós, Daniel
  • Paulillo, Bruno
  • Barrantes, Jessica
  • Mendoza Carreño, José
  • Mihi, Agustín
  • St Clair, Todd
  • Mazumder, Prantik
  • Pruneri, Valerio
Ultrathin metal films (UTMFs) are used in a wide range of applications, from transparent electrodes to infrared mirrors and metasurfaces. Due to their small thickness (<5 nm), the electrical and optical properties of UTMFs can be changed by external stimuli, for example, by applying an electric field through an ion gel. It is also known that oxidized thin films and nanostructures of Au can be reduced by irradiating with short-wavelength light. Here we show that the resistance, reflectance, and resonant optical response of Au UTMFs is changed significantly by ultraviolet light. More specifically, photoreduction and oxidation processes can be sequentially applied for continuous tuning, with observed modulation ranges for sheet resistance (Rs) and reflectance of more than 40% and 30%, respectively. The proposed method has the potential for achieving reconfigurable UTMF structures and trimming their response to specific working points, e.g., a predetermined resonance wavelength and amplitude. This is also important for large scale deployment of such surfaces as one can compensate material nonuniformity, morphological, and structural dimension errors occurring during fabrication., This work was partially funded by CEX2019-000910-S [MCIN/AEI/10.13039/501100011033], and the project TUNA-SURF (PID2019-106892RB-I00) from Fundació Cellex, Fundació Mir-Puig, and Generalitat de Catalunya through CERCA and Agència de Gestió d’Ajuts Universitaris i de Recerca (2021 SGR 01458). This project received funding from the European Unio’s Horizon 2020 Research and Innovation Programme under Marie Skłodowska-Curie grant agreement No. 754510, and from Ayuda (PRE2017-082781) funded by MCIN/AEI/10.13039/501100011033 y FSE “El FSE invierte en tu futuro”. This project received funding from the Spanish Ministerio de Ciencia e Innovación through grant PID2019-106860GB-I00/AEI/10.13039/501100011033 and FUNFUTURE (CEX2019-000917-S, Spanish Severo Ochoa Centre of Excellence program). J.M.C. acknowledges FPI fellowships (PRE2020-09411) from MICINN cofinanced by the European Social Fund and the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantitative Mid-Infrared Plasmonic Biosensing on Scalable Graphene Nanostructures

  • Bareza, Nestor Jr.
  • Wajs, Ewelina
  • Paulillo, Bruno
  • Tullila, Antti
  • Jaatinen, Hannakaisa
  • Milani, Roberto
  • Dore, Camilla
  • Mihi, Agustín
  • Nevanen, Tarja K.
  • Pruneri, Valerio
Graphene nanostructures, exhibiting tunable and nanoscale-confined mid-infrared (mid-IR) plasmons, prevail as a powerful spectroscopic platform for novel surface-enhanced molecular identification. Particularly, graphene shows exciting opportunities for biosensing applications due to its versatile functionalization methods with different biomolecular building blocks (e.g., enzymes, proteins, and DNA). Here, a quantitative bioassay based on the mid-IR localized surface plasmon resonance (LSPR) modulation in functionalized graphene nanostructures is demonstrated. Specifically, vitamin B12 (vB12) using the specific recognition elements on modified graphene nanoribbons (i.e., pyrene linkers via π − π stacking + anti-vB12 antibody fragments via amide bond) is detected. Different concentrations of vB12 spotted on an arrayed panel of a single chip are quantified by the graphene LSPR shifts, where a limit of detection (LOD) of 53.5 ng mL−1 is obtained. The upscaling potential of the bioassay using large area nanostructured graphene films produced by nanoimprinting 2D hole arrays is illustrated. The integration of quantitative bioassay with scalable graphene nanostructures shows promising routes of graphene-based mid-IR platforms toward prospective industrial applications., N.B. and E.W. contributed equally to this work. Tuula Kuurila and Salla Pentikäinen from VTT were thanked for technical assistance in antibody production and purification. Harri Siitari was thanked for support as a project manager during the anti-vB12 antibody development. The authors thank Daniel Martinez for help with AFM measurements. The research leading to these results has received funding from the H2020 Programme under Grant Agreement No. 881603 (Graphene Flagship). This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 754510. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 665884. The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (CEX2019-000910-S and CEX2019-000917-S) and project TUNA-SURF (PID2019-106892RB-I00) and PID2019-106860GB-I00 (HIGHN), Fundació Mir-Puig, and from Generalitat de Catalunya through the CERCA program, from AGAUR 2017 SGR 1634 and the Beatriu de Pinos-3 Postdoctoral Programme (BP3) under grant agreement ID 801370. This work was partially funded by CEX2019-000910-S [MCIN/ AEI/10.13039/501100011033], Fundació Cellex, Fundació Mir-Puig, and Generalitat de Catalunya through CERCA. Antibody discovery was funded by VTT Technical Research Centre of Finland and Development6 -project funded by Turku Science Park Oy, City of Turku, Turku Bio Valley Ltd., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High Q-Factor Plasmonic Surface Lattice Resonances in Colloidal Nanoparticle Arrays

  • Qi, Xiaoyu
  • Pérez, Luis Alberto
  • Alonso Carmona, M. Isabel
  • Mihi, Agustín
Surface lattice resonances (SLRs) sustained by ordered metal arrays are characterized by their narrow spectral features, remarkable quality factors, and the ability to tune their spectral properties based on the periodicity of the array. However, the majority of these structures are fabricated using classical lithographic processes or require postannealing steps at high temperatures to enhance the quality of the metal. These limitations hinder the widespread utilization of these periodic metal arrays in various applications. In this work, we use the scalable technique of template-assisted assembly of metal colloids to produce plasmonic supercrystals over centimeter areas capable of sustaining SLRs with high Q factors reaching up to 270. Our approach obviates the need for any postprocessing, offering a streamlined and efficient fabrication route. Furthermore, our method enables extensive tunability across the entire visible and near-infrared spectral ranges, empowering the design of tailored plasmonic resonant structures for a wide range of applications., This project received funding from the Spanish Ministerio de Ciencia e Innovación through grants, PDC2021-121475-I00/AEI/10.13039/501100011033, TED2021-132807B–I00 by the “European Union NextGenerationEU/PRTR, PID2019-106860GB-I00/AEI/10.13039/501100011033 and FUNFUTURE (CEX2019-000917-S)”, in the framework of the Spanish Severo Ochoa Centre of Excellence program. The authors also acknowledge AGAUR’s grant 2021-SGR-00444. X.Q. kindly acknowledges the auspices of the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona and the China Scholarship Council for funding (CSC No. 202206790019)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Magneto-ionic suppression of magnetic vortices

  • Chen, Yu|||0000-0001-9890-9551
  • Nicolenco, Aliona|||0000-0003-4624-2163
  • Molet, Pau|||0000-0003-3693-0309
  • Mihi, Agustín|||0000-0003-3821-7881
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionics refers to the non-volatile control of the magnetic properties of materials by voltage-driven ion migration. This phenomenon constitutes one of the most important magnetoelectric mechanisms and, so far, it has been employed to modify the magnetic easy axis of thin films, their coercivity or their net magnetization. Herein, a novel magneto-ionic effect is demonstrated: the transition from vortex to coherent rotation states, caused by voltage-induced ion motion, in arrays of patterned nanopillars. Electrolyte-gated Co/GdOx bilayered nanopillars are chosen as a model system. Electron microscopy observations reveal that, upon voltage application, oxygen ions diffuse from GdOx to Co, resulting in the development of paramagnetic oxide phases (CoOx) along sporadic diffusion channels. This breaks up the initial magnetization configuration of the ferromagnetic pillars (i.e. vortex states) and leads to the formation of small ferromagnetic nanoclusters, embedded in the CoOx matrix, which behave as single-domain nanoparticles. As a result, a decrease in the net magnetic moment is observed, together with a drastic change in the shape of the hysteresis loop. Micromagnetic simulations are used to interpret these findings. These results pave the way towards a new potential application of magnetoelectricity: the magneto-ionic control of magnetic vortex states.