Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

High Q-Factor Plasmonic Surface Lattice Resonances in Colloidal Nanoparticle Arrays

  • Qi, Xiaoyu|||0009-0008-8677-7879
  • Pérez, Luis Alberto|||0000-0003-2802-4891
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Mihi, Agustín|||0000-0003-3821-7881
Surface lattice resonances (SLRs) sustained by ordered metal arrays are characterized by their narrow spectral features, remarkable quality factors, and the ability to tune their spectral properties based on the periodicity of the array. However, the majority of these structures are fabricated using classical lithographic processes or require postannealing steps at high temperatures to enhance the quality of the metal. These limitations hinder the widespread utilization of these periodic metal arrays in various applications. In this work, we use the scalable technique of template-assisted assembly of metal colloids to produce plasmonic supercrystals over centimeter areas capable of sustaining SLRs with high Q factors reaching up to 270. Our approach obviates the need for any postprocessing, offering a streamlined and efficient fabrication route. Furthermore, our method enables extensive tunability across the entire visible and near-infrared spectral ranges, empowering the design of tailored plasmonic resonant structures for a wide range of applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Chiral plasmonic superlattices from template-assisted assembly of achiral nanoparticles

  • Qi, Xiaoyu|||0009-0008-8677-7879
  • Pérez, Luis Alberto|||0000-0003-2802-4891
  • Mendoza-Carreño, Jose|||0000-0001-8650-9913
  • Garriga, Miquel|||0000-0002-6683-0790
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Mihi, Agustín|||0000-0003-3821-7881
The creation of chiral plasmonic architectures combining templates with achiral plasmonic particles leads to strong chiroptical responses that can be finely tuned via the characteristics of the colloidal building blocks. Here we show how elastomeric molds, pre-patterned with a hexagonal array of triskelia motifs, can guide the assembly of ordinary noble metal colloids into chiral plasmonic architectures with strong dichroism values. Under normal incidence, the chiral arrays made with gold and silver colloids showed g-factors of 0.18 and 0.4, respectively. In all cases, increasing the size of the colloid allows tuning the optical properties of the structure in the VIS-NIR range. When a superstrate layer is deposited onto the structures, the extrinsic chirality response of the 2D superlattice is revealed and strongly amplified by the chiral motifs under oblique inspection, leading to g-factors of ± 1.2 at ± 14°. Finally, these chiral plasmonic resonances sustained by the triskelion array are used to produce circularly polarized photoluminescence from achiral organic dyes placed on top with up to 20% of dissymmetry.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Symmetric Metal Organic Framework-Plasmonic Architectures for Reversible and High-Sensitivity Optical Sensing

  • Qi, Xiaoyu|||0009-0008-8677-7879
  • Pérez, Luis Alberto|||0000-0003-2802-4891
  • Meng, Lingxin
  • Imaz, Inhar|||0000-0002-0278-1141
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Mihi, Agustín|||0000-0003-3821-7881
Plasmonic nanostructures have attracted considerable interest for their ability to manipulate light at the nanoscale. The optical response of these metallic architectures is greatly sensitive to changes in their surrounding environment, which makes them particularly interesting for sensing applications. Here, we report a versatile and highly sensitive plasmonic sensing platform that combines the surface lattice resonances (SLRs), sustained by 2D gratings of metal nanoparticles, and the exceptional refractive index tunability offered by ZIF-8 metal-organic framework (MOF) films. The SLRs provide narrow resonances that strongly depend on the surrounding refractive index, which can be modulated via solvent exchange in the ZIF-8. The plasmonic 2D arrays were fabricated using templated-assisted assembly of metal colloids; a scalable and gentle process that enabled the study of different ZIF-8/grating configurations. First, we studied ZIF-8 films on top of the 2D arrays, where an optimized concentration of the colloidal dispersion allowed dynamic and reversible ON/OFF tuning of the SLR response. Second, we explored the role of the refractive index mismatch between substrate and ZIF-8 superstrate. Finally, we fabricated 2D plasmonic gratings completely embedded within ZIF-8 layers, achieving enhanced sensing performance with a refractive index sensitivity of 427 ± 19 nm·RIU . These results highlight the potential of MOF-plasmonic hybrids as responsive and tunable nanophotonic platforms for next-generation optical sensing applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

In-plane thermal diffusivity determination using beam-offset frequency-domain thermoreflectance with a one-dimensional optical heat source

  • Xu, Kai|||0000-0001-6999-1904
  • Guo, Jiali
  • Raciti, Grazia
  • Goñi, Alejandro|||0000-0002-1193-3063
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Zardo, Ilaria|||0000-0002-8685-2305
  • Campoy-Quiles, Mariano|||0000-0002-8911-640X
  • Reparaz, Juan Sebastian
We present an innovative contactless method suitable to study in-plane thermal transport based on beam-offset frequency-domain thermoreflectance using a one-dimensional heat source with uniform power distribution. Using a one-dimensional heat source provides a number of advantages as compared to point-like heat sources, as typically used in time- and frequency-domain thermoreflectance experiments, just to name a few: (i) it leads to a slower spatial decay of the temperature field in the direction perpendicular to the line-shaped heat source, allowing to probe the temperature field at larger distances from the heater, hence, enhancing the sensitivity to in-plane thermal transport; (ii) the frequency range of interest is typically <100 kHz. This rather low frequency range is convenient regarding the cost of the required excitation laser system but, most importantly, it allows the study of materials without the presence of a metallic transducer with almost no influence of the finite optical penetration depth of the pump and probe beams on the thermal phase lag, which arises from the large thermal penetration depth imposed by the used frequency range. We also show that for the case of a harmonic thermal excitation source, the phase lag between the thermal excitation and thermal response of the sample exhibits a linear dependence with their spatial offset, where the slope is proportional to the inverse of the thermal diffusivity of the material. We demonstrate the applicability of this method to the cases of: (i) suspended thin films of Si and PDPP4T, (ii) Bi bulk samples, and (iii) Si, glass, and highly-oriented pyrollitic graphite (HOPG) bulk samples with a thin metallic transducer. Finally, we also show that it is possible to study in-plane heat transport on substrates with rather low thermal diffusivity, e.g., glass, even using a metallic transducer. We achieve this by an original approach based on patterning the transducer using focused ion beam, with the key purpose of limiting in-plane heat transport through the thin metallic transducer.