Skip to main content

TRANSPORTE TERMICO EN MATERIALES 2D Y EN INTERFACES

PID2020-119777GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 53
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Microstructural Evolution Dominates the Changes in the Thermal Conductivity of Conjugated Polymers Upon Doping

  • Guo, Jiali
  • Asatryan, Jesika
  • Martín, Jaime
  • Campoy-Quiles, Mariano
[Abstract]: In this study, the correlation between the changes in microstructure of conjugated polymers upon doping and their concomitant thermal transport properties is elucidated. Eight conjugated polymers across distinct doping systems are examined: molecular dopants, Lewis acid type dopants, and ion-exchange systems. These findings indicate that, upon doping, there is a decrease in out-of-plane thermal conductivity for five polymers characterized by high structural order, such as those based on thiophene, diketopyrrolopyrrole, and terthiophene-naphthalimide copolymers. Conversely, for polymers with less ordered structures, including regioregular poly(3-hexylthiophene) and thiophene-based polymers with oligoether side chains, an increase in out-of-plane thermal conductivity is observed. To elucidate these trends, several hypotheses are examined: i) enhanced intrinsic thermal anisotropy originating from backbone orientation, ii) variations in the crystalline to amorphous fraction, and (iii) alloying effects resulting from dopant incorporation. Grazing incidence wide-angle X-ray scattering reveals that in-plane alignment exerts a direct influence on both in-plane and out-of-plane thermal conductivities. Photooxidation experiments provide further insights into the role of alloy scattering. Ultimately, the in-plane thermoelectric figure of merit is ascertained for two diketopyrrolopyrrole-based polymers, underscoring the critical importance of measuring thermal and electrical properties in the same orientation to ensure precise thermoelectric evaluation., The authors acknowledge funding from the European Union’s Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie grant agreement no. 955837 (HORATES). The authors acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades and the for its support through Grant CEX2023- in the framework of the Spanish Severo Ochoa Centre of Excellence, and Grants PID2021-128924OB-I00, PID2020-119777GBI00 (THERM2MAIN), PID2022-138908NB-C33, and PDC2021-121814- I00 (COVEQ). The authors also acknowledge Grant 2021-SGR-00444 (NANOPTO) from the Catalan agency AGAUR. The authors acknowledge Dr. Bernhard Dörling for support with thermoelectric measurements and Dr. Agustín Mihi as well as ICMAB-CSIC for access to and support with the FTIR equipment. This work has been carried out within the framework of the doctoral program in Material Science at the Universitat Autònoma de Barcelona in which J. G. was enrolled. The authors acknowledge support for the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Generalitat de Catalunya; 2021-SGR-00444
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

A Universal, Highly Stable Dopant System for Organic Semiconductors Based on Lewis-Paired Dopant Complexes

  • Zapata-Arteaga, Osnat
  • Perevedentsev, Aleksandr
  • Prete, Michela
  • Busato, Stephan
  • Floris, Paolo Sebastiano
  • Asatryan, Jesika
  • Rurali, Riccardo
  • Martín, Jaime
  • Campoy-Quiles, Mariano
[Abstract]: Chemical doping of organic semiconductors is an essential enabler for applications in electronic and energy-conversion devices such as thermoelectrics. Here, Lewis-paired complexes are advanced as high-performance dopants that address all the principal drawbacks of conventional dopants in terms of limited electrical conductivity, thermal stability, and generality. The study focuses on the Lewis acid B(C6F5)3 (BCF) and 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) bearing Lewis-basic −CN groups. Due to its high electron affinity, BCF:F4TCNQ dopes an exceptionally wide range of organic semiconductors, over 20 of which are investigated. Complex activation and microstructure control lead to conductivities for poly(3-hexylthiophene) (P3HT) exceeding 300 and 900 S cm–1 for isotropic and chain-oriented films, respectively, resulting in a 10 to 50 times larger thermoelectric power factor compared to those obtained with neat dopants. Moreover, BCF:F4TCNQ-doped P3HT exhibits a 3-fold higher thermal dedoping activation energy compared to that obtained with neat dopants and at least a factor of 10 better operational stability., We thank Martin Kreuzer for extensive support and fruitful discussions at the Alba synchrotron BL01-MIRAS beamline. Jiali Guo and Dr. Edgar Gutierrez are also thanked for their support with the Alba experiments. We also thank Prof. Walter Caseri and Dr Marco D’Elia (Department of Materials, ETH Zürich) for generously contributing samples of poly(phenylene methylene)s as well as the many stimulating discussions. Dr Agustín Mihi (ICMAB-CSIC) is thanked for providing access to the Bruker IR spectrophotometry equipment. This work was financially supported by the European Commission through the Marie Skłodowska-Curie project HORATES (GA- 955837), by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) under grants PID2020-119777GB-I00, PID2021-128924OB-I00 and the Severo Ochoa Centres of Excellence Program under grant CEX2019-000917-S (particularly, PALOMA grant within ICMAB’s ‘Frontier Interdisciplinary Projects’ (FIP-2021) Program), and by the Generalitat de Catalunya under grant no. 2017 SGR 1506. The work of PSF has been carried out within the PhD program in Physics of the Universitat Autònoma de Barcelona (UAB). We thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources., Generalitat de Catalunya; 2017-SGR-1506
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Transparent niobium-doped titanium dioxide thin films with high Seebeck coefficient for thermoelectric applications

  • Ribeiro, Joana M.
  • Correia, Filipe C.
  • Rodrigues, F. J.
  • Reparaz, J. Sebastian
  • Goñi, Alejandro R.
  • Tavares, C. J.
This work reports the production and characterization of optically transparent Nb-doped TiO2 thin films with enhanced thermoelectric properties deposited on glass and Si by reactive d.c. magnetron sputtering in high vacuum. The purpose of these films is to harvest thermal energy from the environment and convert it to electrical energy. Several process parameters, such as reactive and working gas flow rate, deposition temperature, target current density and post-annealing conditions, directly affect the morphology and crystalline structure of the thin films. The optimization of these parameters results in thin films with thickness of 120–300 nm, maximum average optical transmittance in the visible range of 73%, n-type electrical resistivity of 0.05 Ω·cm, thermal conductivity around 1.5 W·m−1·K−1 and a maximum absolute Seebeck coefficient of 223 μV·K−1. The resulting maximum thermoelectric power factor is 60 μW·K−2·m−1 and the maximum thermoelectric figure of merit is 0.014. Hence, modifying the optical, electric, thermal and thermoelectric properties of the thin films enables their suitability for applications as transparent electrodes in photovoltaic systems and touch displays, amongst other devices., Joana Ribeiro is grateful to the Fundação para a Ciência e Tecnologia (FCT, Portugal) for the Ph.D. grant SFRH/BD/147221/2019. Filipe Correia is grateful to the FCT, Portugal, for the Ph.D. grant SFRH/BD/111720/2015. Funding is also gratefully acknowledged from FCT/PIDDAC through the Strategic Funds project reference UIDB/04650/2020-2023 and from the Spanish Ministerio de Ciencia e Innovación (MICINN) through grants SEV-2015-0496 (FUNMAT) and CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program, and grant PID2020-119777GB-I00 (THERM2MAIN)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced Photoluminescence of Cesium Lead Halide Perovskites by Quasi-3D Photonic Crystals

  • Mendoza Carreño, José
  • Passarelli, Nicolás
  • Otero, Clara
  • Polaravapu, Lakshminarayana
  • Pérez, Luis Alberto
  • Reparaz, J. Sebastian
  • Alonso Carmona, M. Isabel
  • Mihi, Agustín
Cesium lead halide perovskite nanocrystals have emerged as one of the most promising candidates for manufacturing portable lasers and light sources. In order to harness and exploit their photoluminescence more effectively, the nanocrystals are often accompanied by a photonic scheme that improves light emission. In this work, one introduces a quasi-3D photonic crystal composed of a 2D-grating on top of a distributed Bragg reflector (DBR) that provides a greater photoluminescence enhancement than the isolated architectures alone. The quasi-3D photonic crystals support both Rayleigh-Wood anomalies and guided modes that populate the photonic bandgap of the Bragg mirror, all of them capable of enhancing the outcoupling of light from the emitting layer. In order to demonstrate the benefits of the quasi-3D system, one prepares 2D-gratings, DBRs, and quasi-3D photonic crystals covered with metal halide perovskite nanocrystals and studies the photoluminescence enhancement produced in each case. Interestingly, the quasi-3D structure exhibits a photoluminescence enhancement of 16 times and an increase in spontaneous emission rate, greatly exceeding the values observed for the separate components., This project was received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 637116, Enlightment), the Generalitat de Catalunya (2017-SGR-00488), and the Spanish Ministerio de Ciencia e Innovación through grants PID2019-106860GB-I00, PID2020-119777GB-I00 and CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program. L.P. acknowledges the support from the Spanish Ministerio de Ciencia e Innovación through Ramón y Cajal grant (RYC2018-026103-I). J.M.C. acknowledges an FPI fellowship (PRE2020-09411) from MICINN cofinanced by the European Social Fund and the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dynamical tuning of the thermal conductivity via magnetophononic effects

  • Cazorla, Claudio
  • Rurali, Riccardo
Strategies for tuning the thermal conductivity of crystals by means of external fields are rare. Here, we predict the existence of large magnetophononic effects in materials that undergo antiferromagnetic (AFM) ↔ ferromagnetic (FM) phase transitions, which allow for the modulation of the lattice heat conductivity, κL, via the application of magnetic fields. Specifically, by using first-principles methods we predict a large and anomalous κL increase of ≈40% for the metamagnetic phase transition occurring in bulk FeRh near room temperature. The disclosed magnetophononic effects are caused by large anharmonic spin-phonon couplings, namely, significant differences in the phase space of allowed phonon-phonon collision processes taking place in the respective AFM and FM phases., We acknowledge financial support by MCIN/AEI/10.13039/501100011033 under Grant No. PID2020-119777GB-I00, the “Ramón y Cajal” fellowship RYC2018-024947-I, and the Severo Ochoa Centres of Excellence Program (CEX2019-000917-S), and by the Generalitat de Catalunya under Grant No. 2017 SGR 1506. Calculations were performed at the Centro de Supercomputación de Galicia (CESGA) within action FI-2021-1-0007 of the Red Española de Supercomputación (RES). We thank Michael Wolloch and Jesús Carrete for useful discussions., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anisotropic thermoreflectance thermometry: A contactless frequency-domain thermoreflectance approach to study anisotropic thermal transport

  • Pérez, Luis Alberto
  • Xu, Kai
  • Wagner, Markus R.
  • Dörling, Bernhard
  • Perevedentsev, Aleksandr
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
  • Alonso Carmona, M. Isabel
  • Reparaz, J. Sebastian
We developed a novel contactless frequency-domain thermoreflectance approach to study thermal transport, which is particularly convenient when thermally anisotropic materials are considered. The method is based on a line-shaped heater geometry, produced with a holographic diffractive optical element, instead of using a spot heater as in conventional thermoreflectance. The heater geometry is similar to the one used in the 3-omega method, however, keeping all the technical advantages offered by non-contact methodologies. The present method is especially suitable to determine all the elements of the thermal conductivity tensor, which is experimentally achieved by simply rotating the sample with respect to the line-shaped optical heater. We provide the mathematical solution of the heat equation for the cases of anisotropic substrates, thin films, and multilayer systems. This methodology allows an accurate determination of the thermal conductivity and does not require complex modeling or intensive computational efforts to process the experimental data, i.e., the thermal conductivity is obtained through a simple linear fit ("slope method"), in a similar fashion to the 3-omega method. We demonstrate the potential of this approach by studying isotropic and anisotropic materials in a wide range of thermal conductivities. In particular, we have studied the following inorganic and organic systems: (i) glass, Si, and Ge substrates (isotropic), (ii) β-Ga2O3 and a Kapton substrate (anisotropic), and (iii) a 285 nm thick SiO2 thin film deposited on a Si substrate. The accuracy in the determination of the thermal conductivity is estimated as ≈5%, whereas the temperature uncertainty is ΔT ≈ 3 mK., The authors acknowledge financial support from the Spanish Ministerio de Economía, Industria y Competitividad, through Grant No. CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and Grant Nos. PID2020-119777GB-I00 (THERM2MAIN), PDC2021-121814-I00 (COVEQ), PGC2018-095411-B-100 (RAINBOW), MAT2017-90024-P (TANGENTS)-EI/FEDER, and 2020AEP141; the Generalitat de Catalunya through Grant Nos. 2017SGR488 and AGAUR 2018 PROD 00191; and from the European Research Council (ERC) under Grant Agreement No. 648901., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly Aligned Bacterial Nanocellulose Films Obtained During Static Biosynthesis in a Reproducible and Straightforward Approach

  • Murugarren, Nerea
  • Roig Sánchez, Soledad 
  • Anton Sales, Irene
  • Malandain, Nanthilde
  • Xu, Kai
  • Solano, Eduardo
  • Reparaz, J. Sebastian
  • Laromaine, Anna
Bacterial nanocellulose (BNC) is usually produced as randomly-organized highly pure cellulose nanofibers films. Its high water-holding capacity, porosity, mechanical strength, and biocompatibility make it unique. Ordered structures are found in nature and the properties appearing upon aligning polymers fibers inspire everyone to achieve highly aligned BNC (A-BNC) films. This work takes advantage of natural bacteria biosynthesis in a reproducible and straightforward approach. Bacteria confined and statically incubated biosynthesized BNC nanofibers in a single direction without entanglement. The obtained film is highly oriented within the total volume confirmed by polarization-resolved second-harmonic generation signal and Small Angle X-ray Scattering. The biosynthesis approach is improved by reusing the bacterial substrates to obtain A-BNC reproducibly and repeatedly. The suitability of A-BNC as cell carriers is confirmed by adhering to and growing fibroblasts in the substrate. Finally, the thermal conductivity is evaluated by two independent approaches, i.e., using the well-known 3ω-method and a recently developed contactless thermoreflectance approach, confirming a thermal conductivity of 1.63 W mK-1 in the direction of the aligned fibers versus 0.3 W mK-1 perpendicularly. The fivefold increase in thermal conductivity of BNC in the alignment direction forecasts the potential of BNC-based devices outperforming some other natural polymer and synthetic materials., Authors acknowledge the critical reading of Prof. Anna Roig, and the discussions of Dr. Martí Gich and Dr. Mariano Campoy. The also acknowledge the funding from: RTI2018-096273-B-I00 and PID2021-122645O-BI00 funded by MCIN/AEI//10.13039/501100011033/FEDER “Una manera de hacer Europa,” PID2019-104228RB-I00 funded by MCIN/AEI/10.13039/501100011033, the Generalitat de Catalunya (2017SGR765), the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S (FUNFUTURE)), and Grant No. PID2020-119777GB-I00 (THERM2MAIN). SAXS experiments were performed at NCD-SWEET beamline at ALBA synchrotron (Cerdanyola del Vallès, Spain) with the collaboration of ALBA staff. PSHG imaging was performed at the SLN Research Facility, Dr. Pablo Loza-Alvarez, Institute of Photonic Sciences (ICFO) (Castelldefells, Spain). Cell culture was performed at the Cell Culture facility of the University Autonomous of Barcelona (SCAC-UAB). The authors acknowledge the use of Biorender.com. Nanthilde Malandain (Ph.D. scholarship PRE2019-089754) is enrolled in the Ph.D. program of Biotechnology of the UAB., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advanced Optical Characterization of PEDOT:PSS by Combining Spectroscopic Ellipsometry and Raman Scattering

  • Kong, Minghua
  • Garriga Bacardi, Miquel
  • Reparaz, J. Sebastian
  • Alonso, Maria Isabel
The optical properties of various PEDOT:PSS films obtained by drop casting and blade coating are analyzed by variable-angle spectroscopic ellipsometry in the visible-UV spectral range. We discuss observed differences in the optical spectra due to PSS content and DMSO treatment and correlate them to structural changes extracted from Raman measurements. In particular, we investigate the optical anisotropy of the complex refractive indices which arises from the in-plane arrangement of the PEDOT backbones, giving rise to optically uniaxial behavior with the optic axis perpendicular to the film plane. Although this is widely accepted, most investigations disregard the anisotropy for simplicity, which sometimes leads to inaccurate conclusions. In this work, we compare the results of isotropic and anisotropic analyses to clarify which kind of errors we can expect if anisotropy is not considered. Finally, the correlation between Raman scattering and ellipsometric analyses shows that not only local structural changes of the chain conformation but also the overall morphology of the composite films are significant in the interpretation of Raman spectra., The authors acknowledge funding from the Spanish Ministerio de Ciencia e Innovación (MICINN) through grants PID2019-106860GB-I00 and PID2020-119777GB-I00 and the Spanish Severo Ochoa Centre of Excellence program CEX2019-000917-S, as well as AGAUR, Generalitat de Catalunya, grant 2017-SGR-00488. M.K. is grateful to the UAB PhD program in Materials Science in which she is enrolled and the China Scholarship Council for funding (CSC 201809370071). We thank Agustín Mihi and Mariano Campoy-Quiles for their constant support and ideas., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The effect of Bi doping on the thermal conductivity of ZnO and ZnO:Al thin films

  • Correia, Filipe C.
  • Ribeiro, Joana M.
  • Ferreira, Armando
  • Reparaz, J. Sebastian
  • Goñi, Alejandro R.
  • Boll, Torben
  • Mendes, Adélio
  • Tavares, Carlos J.
The dissipation of heat generation has been one of the largest obstacles in the design of semiconductor devices and reducing the thermal conductivity is vital for improving thermoelectric efficiency. This work focuses on the Bi doping effect on ZnO, and ZnO:Al thin films produced by magnetron sputtering with thickness varying between 500 and 900 nm. The approach introduces Bi ions, a higher mass element, into the ZnO metal-oxide matrix, to hinder phonon-mediated heat conduction and, consequently, reduce thermal conductivity. Atom probe tomography (APT) was employed to survey Bi doping distribution in ZnO:Al:Bi and ZnO:Bi thin films and to study the morphology of the grain boundaries. The thermal properties of the thin films were measured by frequency-domain thermoreflectance. Based on thermal conductivity results, it is concluded that the doping of ZnO films with Al has a significant effect on thermal conductivity, being reduced from 6.0 W m−1 K−1 in its undoped state to 3.3 W m−1 K−1 for ZnO with ∼3 at.% of Al, mainly due to alloy scattering of phonons in the wurtzite cell. Further doping with Bi contributes to a slight reduction in the thermal conductivity of ZnO:Al.Bi films (2.9 W m−1 K−1), due to grain boundary scattering by Bi/Bi2O3 phases. This result is understood as the confluence of two counteracting effects. On the one hand, the thermal conductivity of the film decreases because Bi, unlike Al, is segregated to grain boundaries and does not substitute Zn in the wurtzite crystal lattice, which is unequivocally demonstrated by APT results. On the other hand, the simultaneous presence of Al and Bi triggers a morphological change with the film's microstructure becoming more columnar. This change in microstructure from 3D island growth in ZnO:Al and ZnO:Bi to a more regular columnar structure in ZnO:Al,Bi limits further reduction in the thermal conductivity., Filipe Correia is grateful to the Fundação para a Ciência e Tecnologia (FCT, Portugal) for the Ph.D. grant SFRH/BD/111720/2015. Joana Ribeiro is grateful to the FCT, Portugal, for the Ph.D. grant SFRH/BD/147221/2019. Funding is also gratefully acknowledged from FCT/PIDDAC through the Strategic Funds project reference UIDB/04650/2020–2023 and from the Spanish Ministerio de Ciencia e Innovación (MICINN) through grants SEV-2015-0496 (FUNMAT) and CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program, and grant PID2020-119777 GB-I00 (THERM2MAIN). This work (proposal ID 2018-020-022469) was carried out with the support of the Karlsruhe Nano Micro Facility (KNMFi, www.knmf.kit.edu), a Helmholtz Research Infrastructure at Karlsruhe Institute of Technology (KIT, www.kit.edu)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chirality Effects and Semiconductor versus Metallic Nature in Halide Nanotubes

  • Borghesi, Costanza
  • Marlotti, Giacomo Tanzi
  • Canadell, Enric
  • Giorgi, Giacomo
  • Rurali, Riccardo
A density functional theory study of the electronic structure of nanostructures based on the hexagonal layers of LuI3 is reported. Both bulk and slabs with one to three layers exhibit large and indirect bandgaps. Different families of nanotubes can be generated from these layers. Semiconducting nanotubes of two different chiralities have been studied. The direct or indirect nature of the optical gaps depends on the chirality, and a simple rationalization of this observation based on band folding arguments is provided. Remarkably, a metastable form of the armchair LuI3 nanotubes can be obtained under a structural rearrangement such that some iodine atoms are segregated toward the center of the nanotube forming chains of dimerized iodines. These nanotubes having an Lu2NI5N backbone are predicted to be metallic and should be immune toward a Peierls distortion. The iodine chains in the inner part of the nanotubes are weakly bound to the backbone so that it should be possible to remove these chains to generate a new series of neutral Lu2NI5N nanotubes which could exhibit interesting magnetic behavior. Because the LuI3 structure occurs for a large number of lanthanide and actinide trihalides, a tuning of the optical, transport, and probably magnetic properties of these new families of nanotubes can be a challenging prospect for future experimental studies., E.C. and R.R. acknowledge financial support by MCIN/AEI/10.13039/501100011033 under Grants PID2020-119777GB-I00 and PGC2018-096955-B-C44, the Severo Ochoa Centres of Excellence Program under Grant CEX2019-000917-S, and the Generalitat de Catalunya under Grant 2021 SGR 01519. We thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources and Gerard Tobias and Belén Ballesteros for useful discussions. G.G. thanks the European Union - NextGenerationEU under the Italian Ministry of University and Research (MUR) National Innovation Ecosystem Grant ECS00000041 - VITALITY for funding and acknowledges Università degli Studi di Perugia and MUR for support within the project Vitality. C.B. and G.G. acknowledge ISCRA B and C initiatives for awarding access to computing resources on m100 at CINECA SuperComputer Center, Italy., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Universal ion-transport descriptors and classes of inorganic solid-state electrolytes

  • López, Cibrán
  • Emperador, Agustí
  • Saucedo, Edgardo
  • Rurali, Riccardo
  • Cazorla, Claudio
Solid-state electrolytes (SSEs) with high ion conductivity are pivotal for the development and large-scale adoption of green-energy conversion and storage technologies such as fuel cells, electrocatalysts and solid-state batteries. Yet, SSEs are extremely complex materials for which general rational design principles remain indeterminate. Here, we combine first-principles materials modelling, computational power and modern data analysis techniques to advance towards the solution of such a fundamental and technologically pressing problem. Our data-driven survey reveals that the correlations between ion diffusivity and other materials descriptors in general are monotonic, although not necessarily linear, and largest when the latter are of vibrational nature and explicitly incorporate anharmonic effects. Surprisingly, principal component and k-means clustering analyses show that elastic and vibrational descriptors, rather than the usual ones related to chemical composition and ion mobility, are best suited for reducing the high complexity of SSEs and classifying them into universal classes. Our findings highlight the need for considering databases that incorporate temperature effects to improve our understanding of SSEs and point towards a generalized approach to the design of energy materials., We acknowledge financial support from the MCIN/AEI/10.13039/501100011033 under Grant no. PID2020-119777GB-I00, the “Ramón y Cajal” fellowship RYC2018-024947-I, the Severo Ochoa Centres of Excellence Program (CEX2019-000917-S), the Generalitat de Catalunya under Grant no. 2017SGR1506, and the CSIC under the “JAE Intro SOMdM 2021” grant program. The authors acknowledge computational support from the Red Española de Supercomputación (RES) under the grants FI-2022-1-0006, FI-2022-2-0003 and FI-2022-3-0014., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-plane thermal diffusivity determination using beam-offset frequency-domain thermoreflectance with a one-dimensional optical heat source

  • Xu, Kai
  • Guo, Jiali
  • Raciti, Grazia
  • Goñi, Alejandro R.
  • Alonso Carmona, M. Isabel
  • Borrisé, Xavier
  • Zardo, Ilaria
  • Campoy Quiles, Mariano
  • Reparaz, J. Sebastian
We present an innovative contactless method suitable to study in-plane thermal transport based on beam-offset frequency-domain thermoreflectance using a one-dimensional heat source with uniform power distribution. Using a one-dimensional heat source provides a number of advantages as compared to point-like heat sources, as typically used in time- and frequency-domain thermoreflectance experiments, just to name a few: (i) it leads to a slower spatial decay of the temperature field in the direction perpendicular to the line-shaped heat source, allowing to probe the temperature field at larger distances from the heater, hence, enhancing the sensitivity to in-plane thermal transport; (ii) the frequency range of interest is typically kHz. This rather low frequency range is convenient regarding the cost of the required excitation laser system but, most importantly, it allows the study of materials without the presence of a metallic transducer with almost no influence of the finite optical penetration depth of the pump and probe beams on the thermal phase lag, which arises from the large thermal penetration depth imposed by the used frequency range. We also show that for the case of a harmonic thermal excitation source, the phase lag between the thermal excitation and thermal response of the sample exhibits a linear dependence with their spatial offset, where the slope is proportional to the inverse of the thermal diffusivity of the material. We demonstrate the applicability of this method to the cases of: (i) suspended thin films of Si and PDPP4T, (ii) Bi bulk samples, and (iii) Si, glass, and highly-oriented pyrollitic graphite (HOPG) bulk samples with a thin metallic transducer. Finally, we also show that it is possible to study in-plane heat transport on substrates with rather low thermal diffusivity, e.g., glass, even using a metallic transducer. We achieve this by an original approach based on patterning the transducer using focused ion beam, with the key purpose of limiting in-plane heat transport through the thin metallic transducer., We acknowledge financial support from the Spanish Ministerio de Economía, Industria y Competitividad for its support through grant CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program, and grants PID2020-119777GB-I00 (THERM2MAIN), and PDC2021-121814-I00 (COVEQ). This work was financially supported by the European Commission through the Marie Sklodowska-Curie project HORATES (GA-955837). We also acknowledge grant 2021-SGR-00444 (NANOPTO) from AGAUR. K.X. acknowledges a fellowship (CSC201806950006) from China Scholarship Council and the Ph.D. programme in Materials Science from Universitat Autónoma de Barcelona in which he was enrolled. G.R and I.Z. acknowledge financial support from Eucor, The European Campus (Marie Sklodowska-Curie QUSTEC grant agreement no. 847471) and the Swiss National Science Foundation (Project Grant no. CRSII5 189924 )., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interplay Between Doping, Morphology, and Lattice Thermal Conductivity in PEDOT:PSS

  • Floris, Paolo Sebastiano
  • Melis, Claudio
  • Rurali, Riccardo
Organic materials for thermoelectric (TE) applications have attracted a fair amount of attention in recent years due to remarkable advances achieved in terms of their figure of merit, ZT: a value of 0.42 has been reported by for poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) films treated with dimethyl sulfoxide, while 0.25 has been obtained for PEDOT:Tosylate. In this study various PEDOT morphologies are investigated, considering both neutral and doped (bipolaronic) samples, by means of classical molecular dynamics, by taking advantage of a recently developed all-atom force field. In the case of bare PEDOT, it is found that changing the distribution of chain lengths affects the thermal conductivity of neutral and doped samples in a different way: longer chain lengths result in higher conductivities in the neutral scenario, whereas an intermediate chain length gives the highest value in the bipolaronic case. The role of PSS in the bipolaronic state, as compared to the simpler case where the counterion is Cl−, is discussed., This work was financially supported by the European Commission through the Marie Skłodowska–Curie projects HORATES (GA-955837), by MCIN/AEI/10.13039/501100011033 under grant PID2020-119777GB-I00, and the Severo Ochoa Centres of Excellence Program under grant CEX2019-000917-S, and by the Generalitat de Catalunya under grant no. and 2017 SGR 1506. We thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources. The authors would like to thank Wesley Micheals and Jian Qin for the insights provided about the force field employed in this work, Mariano Campoy-Quiles, Simone Fabiano, Christian Müller, Igor Zozoulenko for useful discussions. The author P.S.F. would like to extend his personal thanks to Marc Domingo Cabases for his advice on some of the technicalities involved in this research., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Giant multiphononic effects in a perovskite oxide

  • Cazorla, Claudio
  • Stengel, Massimiliano
  • Íñiguez, Jorge
  • Rurali, Riccardo
Perovskite oxides offer tremendous potential for applications in information storage and energy conversion, owing to a subtle interplay between their spin, charge, orbital and lattice degrees of freedom. Here, we further expand the possible range of perovskite oxides operation towards the fields of thermal management and thermal computing by exploiting an exceptional synergy between different ferroic orders. We propose dynamical control of the heat flow in a distinctive family of perovskite oxides obtained via the application of small electric (~10 kV/cm) and/or magnetic (~1 T) fields. Based on first-principles simulations, we predict a relative heat conductivity variation of ~100% in SrMnO3 thin films near room temperature resulting from a phase transition that involves huge changes in both the magnetization and electric polarization. The disclosed giant multiphononic effects are fundamentally caused by anharmonic spin-phonon couplings that strongly influence the mean lifetime of phonons., We acknowledge financial support by MCIN/AEI/10.13039/501100011033 under grant PID2020-119777GB-I00, the Ramón y Cajal fellowship RYC2018-024947-I and the Severo Ochoa Centres of Excellence Program (CEX2019-000917-S), and by the Generalitat de Catalunya under grant no. and 2017 SGR 1506. Calculations were performed at the Centro de Supercomputación de Galicia (CESGA) within action FI-2022-1-0012 of the Red Española de Supercomputación (RES). We also thank the support of the Luxembourg National Research Fund through project FNR/C18/MS/12705883/REFOX (J.Í.)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Colossal room-temperature electrocaloric strength aided by hydrostatic pressure in lead-free multiferroic solid solutions

  • Menéndez, César
  • Rurali, Riccardo
  • Cazorla, Claudio
Solid-state cooling applications based on electrocaloric (EC) effects are particularly promising from a technological point of view due to their downsize scalability and natural implementation in circuitry. However, EC effects typically involve materials that contain toxic substances and require relatively large electric fields (∼100-1000 kV cm-1) that cause fateful leakage current and dielectric loss problems. Here, we propose a possible solution to these practical issues that consists of concertedly applying hydrostatic pressure and electric fields on lead-free multiferroic materials. We theoretically demonstrate this strategy by performing first-principles simulations on supertetragonal BiFe1-xCoxO3 solid solutions (BFCO). It is shown that hydrostatic pressure, besides adjusting the occurrence of EC effects to near room temperature, can reduce enormously the intensity of driving electric fields. For pressurized BFCO, we estimate a colossal room-temperature EC strength, defined as the ratio of the adiabatic EC temperature change by an applied electric field, of ∼1 K cm kV-1, a value that is several orders of magnitude larger than those routinely measured in uncompressed ferroelectrics., We acknowledge financial support by the MCIN/AEI/10.13039/501100011033 under grants PID2020-119777GB-I00 and TED2021-130265B-C22, the “Ramón y Cajal” fellowship RYC2018-024947-I and the Severo Ochoa Centres of Excellence Program (CEX2019-000917-S), and by the Generalitat de Catalunya under grant no. 2017 SGR 1506. Computational support was provided by the Red Española de Supercomputación (RES) under the grants FI-2022-1-0012, FI-2022-1-0006, FI-2022-2-0003 and FI-2022-3-0014., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of Oligoether Side-Chain Length on the Thermoelectric Properties of a Polar Polythiophene

  • Craighero, Mariavittoria
  • Guo, Jiali
  • Zokaei, Sepideh
  • Griggs, Sophie
  • Tian, Junfu
  • Asatryan, Jesika
  • Kimpel, Joost
  • Kroon, Renee
  • Xu, Kai
  • Reparaz, J. Sebastian
  • Martin, Jaime
  • Mcculloch, Iain
  • Campoy Quiles, Mariano
  • Mueller, Christian
This article is part of the Advanced Thermoelectric Materials and Devices special issue., Conjugated polymers with oligoether side chains make up a promising class of thermoelectric materials. In this work, the impact of the side-chain length on the thermoelectric and mechanical properties of polythiophenes is investigated. Polymers with tri-, tetra-, or hexaethylene glycol side chains are compared, and the shortest length is found to result in thin films with the highest degree of order upon doping with the p-dopant 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). As a result, a stiff material with an electrical conductivity of up to 830 ± 15 S cm–1 is obtained, resulting in a thermoelectric power factor of about 21 μW m–1 K–2 in the case of as-cast films. Aging at ambient conditions results in an initial decrease in thermoelectric properties but then yields a highly stable performance for at least 3 months, with values of about 200 S cm–1 and 5 μW m–1 K–2. Evidently, identification of the optimal side-chain length is an important criterion for the design of conjugated polymers for organic thermoelectrics., We acknowledge funding from the European Union’s Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie grant agreement no. 955837 (HORATES) and the Knut and Alice Wallenberg Foundation through a Wallenberg Academy Fellowship Prolongation grant. We acknowledge financial support from the Spanish Ministerio de Ciencia e Innovacíon for its support through grant CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program, and grants PID2020-119777GBI00 (THERM2MAIN), and PDC2021-121814-I00 (COVEQ). K.X. acknowledges a fellowship (CSC201806950006) from China Scholarship Council. K.X. and J.G. thank the PhD programme in Materials Science from Universitat Autònoma de Barcelona in which they are enrolled. We thank Johanna Heimonen for help with SEC measurements and Anders Mårtensson for carrying out the AFM measurements. This project was in part performed at the Chalmers Materials Analysis Laboratory (CMAL)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effects of vacancies on the thermal conductivity of Si nanowires

  • Túnica, Marc
  • Floris, Paolo Sebastiano
  • Torres, Pol
  • Rurali, Riccardo
Point defects can be used to tailor the properties of semiconductors, but can also have undesired effects on electronic and thermal transport, particularly in ultrascaled nanostructures, such as nanowires. Here we use all-atom molecular dynamics to study the effect that different concentrations and spatial distributions of vacancies have on the thermal conductivity of Si nanowires, overcoming the limitations of previous studies. Although vacancies are not as effective as the nanovoids found in e.g. porous Si, they can still reduce the thermal conductivity in ultrathin Si nanowires by more than a factor of two, when found in concentrations smaller than 1%. We also present arguments against the so-called self-purification mechanism, which is sometimes suggested to take place and proposes that vacancies have no influence on transport phenomena in nanowires., This work was financially supported by the European Commission through the Marie Skłodowska-Curie projects HORATES (GA-955837), by MCIN/AEI/10.13039/501100011033 under grant PID2020-119777GB-I00, and the Severo Ochoa Centres of Excellence Program under grant CEX2019-000917-S, and by the Generalitat de Catalunya under grant no. 2021 SGR 01519. Calculations were performed at the Centro de Supercomputación de Galicia (CESGA) within action FI-2022-1-0018 of the Red Española de Supercomputación (RES). We thank Antonio Cappai and Miguel Rubí for useful discussions., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reliably straining suspended van der Waals heterostructures

  • Nazzari, Daniele
  • Genser, Jakob
  • Sistani, Masiar
  • Bartmann, Maximilian G.
  • Cartoixà, Xavier
  • Rurali, Riccardo
  • Weber, Walter M.
  • Lugstein, Alois
2D materials provide a rapidly expanding platform for the observation of novel physical phenomena and for the realization of cutting-edge optoelectronic devices. In addition to their peculiar individual characteristics, 2D materials can be stacked into complex van der Waals heterostructures, greatly expanding their potential. Moreover, thanks to their excellent stretchability, strain can be used as a powerful control knob to tune or boost many of their properties. Here, we present a novel method to reliably and repeatedly apply a high uniaxial tensile strain to suspended van der Waals heterostructures. The reported device is engineered starting from a silicon-on-insulator substrate, allowing for the realization of suspended silicon beams that can amplify the applied strain. The strain module functionality is demonstrated using single- and double-layer graphene layers stacked with a multilayered hexagonal boron nitride flake. The heterostructures can be uniaxially strained, respectively, up to ∼ 1.2 % and ∼ 1.8 % ., This work was funded by the Austrian Science Fund (FWF), Project No. P29244-N27. We thank the center for micro- and nanostructures (ZMNS) at the TU Vienna for access to the cleanroom facilities. R.R. acknowledges the financial support by MCIN/AEI/10.13039/501100011033 under Grant No. PID2020-119777GB-I00 and the Severo Ochoa Centers of Excellence Program under Grant No. CEX2019-000917-S and by the Generalitat de Catalunya under Grant No. 2021 SGR 01519. X.C. acknowledges the financial support by Spain’s Ministerio de Ciencia Innovación y Universidades under Grant No. RTI2018-097876-B-C21 (MICIU/AEI/FEDER UE) and the Ministerio de Ciencia e Innovación under Grant No. PID2021-127840NB-I00 (MICINN/AEI/UE). The authors thankfully acknowledge the computer resources, technical expertise, and assistance provided by CESGA., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

GaAs/GaP Superlattice Nanowires for Tailoring Phononic Properties at the Nanoscale: Implications for Thermal Engineering

  • Sivan, Aswathi K.
  • Abad, Begoña
  • Albrigi, Tommaso
  • Arif, Omer
  • Trautvetter, Johannes
  • Ruiz Caridad, Alicia
  • Arya, Chaitanya
  • Zannier, Valentina
  • Sorba, Lucia
  • Rurali, Riccardo
  • Zardo, Ilaria
The possibility to tune the functional properties of nanomaterials is key to their technological applications. Superlattices, i.e., periodic repetitions of two or more materials in one or more dimensions, are being explored for their potential as materials with tailor-made properties. Meanwhile, nanowires offer a myriad of possibilities to engineer systems at the nanoscale, as well as to combine materials that cannot be put together in conventional heterostructures due to the lattice mismatch. In this work, we investigate GaAs/GaP superlattices embedded in GaP nanowires and demonstrate the tunability of their phononic and optoelectronic properties by inelastic light scattering experiments corroborated by ab initio calculations. We observe clear modifications in the dispersion relation for both acoustic and optical phonons in the superlattices nanowires. We find that by controlling the superlattice periodicity, we can achieve tunability of the phonon frequencies. We also performed wavelength-dependent Raman microscopy on GaAs/GaP superlattice nanowires, and our results indicate a reduction in the electronic bandgap in the superlattice compared to the bulk counterpart. All of our experimental results are rationalized with the help of ab initio density functional perturbation theory (DFPT) calculations. This work sheds fresh insights into how material engineering at the nanoscale can tailor phonon dispersion and open pathways for thermal engineering., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 756365) and from the Swiss National Science Foundation grant (Grant No. 200021_184942). A.K.S. acknowledges financial support from the Georg H. Endress Foundation. R.R. acknowledges financial support by the Ministerio de Economía, Industria y Competitividad (MINECO) under grant PID2020-119777GB-I00 and the Severo Ochoa Centres of Excellence Program under grant CEX2019-000917-S and by the Generalitat de Catalunya under grant no. 2017 SGR 1506. B.A. acknowledges support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 891443. A.R.C. acknowledges financial support from the NCCR SPIN, a National Centre of Competence (or Excellence) in Research, funded by the Swiss National Science Foundation (Grant No. 51NF40- 180604)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Upscaling Thermoelectrics: Micron-Thick, Half-a-Meter-Long Carbon Nanotube Films with Monolithic Integration of p- and n-Legs

  • Zapata Arteaga, Osnat
  • Dörling, Bernhard
  • Álvarez Corzo, Iván
  • Xu, Kai
  • Reparaz, J. Sebastian
  • Campoy Quiles, Mariano
This article is part of the Advanced Thermoelectric Materials and Devices special issue., In order for organic thermoelectrics to successfully establish their own niche as energy-harvesting materials, they must reach several crucial milestones, including high performance, long-term stability, and scalability. Performance and stability are currently being actively studied, whereas demonstrations of large-scale compatibility are far more limited and for carbon nanotubes (CNTs) are still missing. The scalability challenge includes material-related economic considerations as well as the availability of fast deposition methods that produce large-scale films that simultaneously satisfy the thickness constraints required for thermoelectric modules. Here we report on true solutions of CNTs that form gels upon air exposure, which can then be dried into micron-thick films. The CNT ink can be extruded using a slot-shaped nozzle into a continuous film (more than half a meter in the present paper) and patterned into alternating n- and p-type components, which are then folded to obtain the finished thermoelectric module. Starting from a given n-type film, differentiation between the n and p components is achieved by a simple postprocessing step that involves a partial oxidation reaction and neutralization of the dopant. The presented method allows the thermoelectric legs to seamlessly interconnect along the continuous film, thus avoiding the need for metal electrodes, and, most importantly, it is compatible with large-scale printing processes. The resulting thermoelectric legs retain 80% of their power factor after 100 days in air and about 30% after 300 days. Using the proposed methodology, we fabricate two thermoelectric modules of 4 and 10 legs that can produce maximum power outputs of 1 and 2.4 μW, respectively, at a temperature difference ΔT of 46 K., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-throughput thermoelectric materials screening by deep convolutional neural network with fused orbital field matrix and composition descriptors

  • Al-Fahdi, Mohammed
  • Yuan, Kunpeng
  • Yao, Yagang
  • Rurali, Riccardo
  • Hu, Ming
Thermoelectric materials harvest waste heat and convert it into reusable electricity. Thermoelectrics are also widely used in inverse ways such as refrigerators and cooling electronics. However, most popular and known thermoelectric materials to date were proposed and found by intuition, mostly through experiments. Unfortunately, it is extremely time and resource consuming to synthesize and measure the thermoelectric properties through trial-and-error experiments. Here, we develop a convolutional neural network (CNN) classification model that utilizes the fused orbital field matrix and composition descriptors to screen a large pool of materials to discover new thermoelectric candidates with power factor higher than 10 μW/cm K2. The model used our own data generated by high-throughput density functional theory calculations coupled with ab initio scattering and transport package to obtain electronic transport properties without assuming constant relaxation time of electrons, which ensures more reliable electronic transport properties calculations than previous studies. The classification model was also compared to some traditional machine learning algorithms such as gradient boosting and random forest. We deployed the classification model on 3465 cubic dynamically stable structures with non-zero bandgap screened from Open Quantum Materials Database. We identified many high-performance thermoelectric materials with ZT > 1 or close to 1 across a wide temperature range from 300 to 700 K and for both n- and p-type doping with different doping concentrations. Moreover, our feature importance and maximal information coefficient analysis demonstrates two previously unreported material descriptors, namely, mean melting temperature and low average deviation of electronegativity, that are strongly correlated with power factor and thus provide a new route for quickly screening potential thermoelectrics with high success rate. Our deep CNN model with fused orbital field matrix and composition descriptors is very promising for screening high power factor thermoelectrics from large-scale hypothetical structures., This work was supported by the NSF (Award Nos. 2030128, 2110033, 2311202, and 2320292), SC EPSCoR/IDeA Program under NSF OIA-1655740 (No. 23-GC01), and ASPIRE grant from the Office of the Vice President for Research at the University of South Carolina (Project No. 80005046). M.A.-F. acknowledges the financial support of the SPARC Graduate Research Grant (Project No. 80004800). R.R. acknowledges financial support by MCIN/AEI/ 10.13039/501100011033 under Grant No. PID2020-119777GB-I00, and the Severo Ochoa Centres of Excellence Program under Grant No. CEX2019-000917-S, and by the Generalitat de Catalunya under Grant No. 2021 SGR 01519. DFT calculations were performed at the Centro de Supercomputaci on de Galicia (CESGA) within action Phonon Database Generation and Analysis for Data Driven Materials Discovery (No. FI-2023-1-0003/FI-2023-2-0005) of the Red Espa~nola de Supercomputaci on (RES, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phonon transport across GaAs/Ge heterojunctions by nonequilibrium molecular dynamics

  • Albrigi, Tommaso
  • Rurali, Riccardo
Interfaces are ubiquitous in modern electronics and assessing their properties is crucial when it comes to device reliability. Here, we present nonequilibrium molecular dynamics calculations of heat transport across GaAs/Ge heterojunctions. We compute the thermal boundary resistance, considering different interface morphologies, ranging from atomically flat to gradual or rough interfaces. We also discuss the implications for thermal rectification and predict a rectification coefficient as large as 30%., We acknowledge the financial support by MCIN/AEI/10.13039/501100011033 under Grant No. PID2020-119777GB-I00, the Severo Ochoa Centres of Excellence Program under Grant No. CEX2019-000917-S, and the Generalitat de Catalunya under Grant No. 2021 SGR 01519. T.A. acknowledges funding through Grant No. PRE2020-093576 (Ayudas para contratos predoctorales para la formación de doctores). We thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A one-way street for phonon transport: past, present and future of solid-state thermal rectification

  • Rurali, Riccardo
Thermal rectification is the dependence of the thermal conductivity on the direction of heat propagation. This fascinating effect could be exploited for the design of thermal devices, such as the thermal diode, and could find application in energy harvesting and thermal management. Where did we start from, what has been achieved and what does the future hold?, Financial support by MCIN/AEI/10.13039/501100011033 under grant PID2020-119777GB-I00, and the Severo Ochoa Centres of Excellence Program under grant CEX2019-000917-S, and by the Generalitat de Catalunya under grant 2021 SGR 01 519 is greatly acknowledged. Many thanks to Ilaria Zardo for proofreading the manuscript., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Universal, Highly Stable Dopant System for Organic Semiconductors Based on Lewis-Paired Dopant Complexes

  • Zapata Arteaga, Osnat
  • Perevedentsev, Aleksandr
  • Prete, Michela
  • Busato, Stephan
  • Floris, Paolo Sebastiano
  • Asatryan, Jesika
  • Rurali, Riccardo
  • Martín, Jaime
  • Campoy Quiles, Mariano
Chemical doping of organic semiconductors is an essential enabler for applications in electronic and energy-conversion devices such as thermoelectrics. Here, Lewis-paired complexes are advanced as high-performance dopants that address all the principal drawbacks of conventional dopants in terms of limited electrical conductivity, thermal stability, and generality. The study focuses on the Lewis acid B(C6F5)3 (BCF) and 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) bearing Lewis-basic −CN groups. Due to its high electron affinity, BCF:F4TCNQ dopes an exceptionally wide range of organic semiconductors, over 20 of which are investigated. Complex activation and microstructure control lead to conductivities for poly(3-hexylthiophene) (P3HT) exceeding 300 and 900 S cm–1 for isotropic and chain-oriented films, respectively, resulting in a 10 to 50 times larger thermoelectric power factor compared to those obtained with neat dopants. Moreover, BCF:F4TCNQ-doped P3HT exhibits a 3-fold higher thermal dedoping activation energy compared to that obtained with neat dopants and at least a factor of 10 better operational stability., We thank Martin Kreuzer for extensive support and fruitful discussions at the Alba synchrotron BL01-MIRAS beamline. Jiali Guo and Dr. Edgar Gutierrez are also thanked for their support with the Alba experiments. We also thank Prof. Walter Caseri and Dr Marco D’Elia (Department of Materials, ETH Zürich) for generously contributing samples of poly(phenylene methylene)s as well as the many stimulating discussions. Dr Agustín Mihi (ICMAB-CSIC) is thanked for providing access to the Bruker IR spectrophotometry equipment. This work was financially supported by the European Commission through the Marie Skłodowska-Curie project HORATES (GA-955837), by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) under grants PID2020-119777GB-I00, PID2021-128924OB-I00 and the Severo Ochoa Centres of Excellence Program under grant CEX2019-000917-S (particularly, PALOMA grant within ICMAB’s ‘Frontier Interdisciplinary Projects’ (FIP-2021) Program), and by the Generalitat de Catalunya under grant no. 2017 SGR 1506. The work of PSF has been carried out within the PhD program in Physics of the Universitat Autònoma de Barcelona (UAB). We thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Light-driven dynamical tuning of the thermal conductivity in ferroelectrics

  • Cazorla, Claudio
  • Bichelmaier, Sebastian
  • Escorihuela Sayalero, Carlos
  • Íñiguez, Jorge
  • Carrete, Jesús
  • Rurali, Riccardo
Dynamical tuning of the thermal conductivity in crystals, κ, is critical for thermal management applications, as well as for energy harvesting and the development of novel phononic devices able to perform logic operations with phonons. Such a desired κ control can be achieved in functional materials that experience large structural and phonon variations as a result of field-induced phase transformations. However, this approach is only practical within reduced temperature intervals containing zero-bias phase transition points, since otherwise the necessary driving fields become excessively large and the materials' performances are detrimentally affected. Here, based on first-principles calculations, we propose an alternative strategy for dynamically tuning κ that is operative over broad temperature conditions and realizable in a wide class of materials. By shining light on the archetypal perovskite oxide KNbO3, we predict that ultrafast and reversible ferroelectric-to-paraelectric phase transitions are induced, yielding large and anisotropic κ variations (up to ≈30% at T = 300 K). These light-induced thermal transport shifts can take place at temperatures spanning several hundreds of kelvin and are essentially the result of anharmonic effects affecting the phonon lifetimes., We acknowledge financial support by MCIN/AEI/10.13039/501100011033 under grant PID2020-119777GB-I00, TED2021-130265B-C22, the “Ramón y Cajal” fellowship RYC2018-024947-I and the Severo Ochoa Centres of Excellence Program (CEX2019-000917-S), and by the Generalitat de Catalunya under grant no. 2021 SGR 01519. J. Í. acknowledges the financial support from the Luxembourg National Research Fund through grant C21/MS/15799044/FERRODYNAMICS. Calculations were performed at the Centro de Supercomputación de Galicia (CESGA) within action FI-2022-1-0012 of the Red Española de Supercomputación (RES)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anisotropic Lattice Thermal Conductivity in Highly Ordered PEDOT Fibers

  • Floris, Paolo Sebastiano
  • Zahabi, Najmeh
  • Zozoulenko, Igor
  • Rurali, Riccardo
When it comes to sustainable and efficient energy solutions, organic semiconductors can play an important role in thermoelectric applications, since they are non-toxic, cheap, made of abundant chemical species, and show intrinsically low thermal conductivities. Their electrical conductivity can be optimized via doping. Yet, thermal conduction should be as low as possible and, to this end, the atomic scale mechanisms behind heat transport –e.g. the correlation between morphology and thermal conductivity or the role of doping– should be understood in detail. Fully atomistic molecular dynamics calculations of the lattice thermal conductivity of doped poly(3,4-ethylenedioxythiophene) (PEDOT) highly ordered, quasi-crystalline nanofibers are presented here. It is found that the conductivity along the backbone direction is not necessarily the highest, but it depends on the length of the PEDOT chains, thus the degree of anisotropy depends on the the aspect ratio of the nanofiber. Indeed, transport along the lamellar direction can be of the same order or higher than that of the backbone if their lengths are comparable. These results challenge the usual expectation that thermal conduction along the backbone largely exceeds those along the lamellar and π − π direction and have the important consequence that the anisotropy could be leveraged in thermal management applications., This work was financially supported by the European Commission through the Marie Skłodowska-Curie projects HORATES (GA-955837), by MCIN/AEI/10.13039/501100011033 under grant PID2020-119777GB-I00, and the Severo Ochoa Centres of Excellence Program under grant CEX2019-000917-S, and by the Generalitat de Catalunya under grant no. and 2017 SGR 1506. The work of PSF has been carried out within the PhD program in Physics of the Universitat Autònoma de Barcelona (UAB). We thank the Centro de Supercomputación de Galicia (CESGA) and National Academic Infrastructure for Supercomputing in Sweden (NAISS) for the use of their computational resources., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Degradation of the ZT thermoelectric figure of merit in silicon when nanostructuring: From bulk to nanowires

  • Raya Moreno, Martí
  • Rurali, Riccardo
  • Cartoixà, Xavier
Since the landmark paper by Hicks and Dresselhaus [Phys. Rev. B 47, 16631(R) (1993)], there has been a general consensus that one-dimensional nanoscale conductors, i.e. nanowires, provide the long sought paradigm to implement the so-called phonon-glass electron-crystal material, which results in large improvements in the thermoelectric figure of merit ZT. Despite some encouraging—though isolated—experimental results, this idea has never been subjected to a rigorous scrutiny and the effect of the coupled dynamics of electrons and phonons has usually been oversimplified. To bypass these limitations, we have calculated the effective thermoelectric parameters for silicon nanowires (SiNWs) by iteratively solving the coupled electron-phonon Boltzmann transport equation (EPBTE) supplied with first-principles data. This allows for an unprecedented precision in determining the correct dependence of the thermoelectric parameters with system size; including, but not limited to, the figure of merit and its enhancement or degradation due to nanostructuring. Indeed, we demonstrate that the commonly used relaxation time approximation (RTA), or the uncoupled beyond the RTA (iterative) solution fail to describe the correct effect of nanostructuring on the thermoelectric properties and efficiency in SiNWs due to the strong contribution of phonon drag to the Seebeck coefficient, so that the use of fully coupled solution of the EPBTE is essential to obtain the correct effect of nanostructuring. Most importantly, we show that, contrarily to what commonly argued, resorting to NWs is not necessarily beneficial for ZT. Indeed, in a wide range of diameters nanostructuring diminishes the Seebeck coefficient faster than the decrease in thermal conductivity, due to the suppression of very long wavelength phonons responsible for the largest contribution to the phonon drag component of the Seebeck coefficient. This penalty to ZT can be mitigated if the NWs have a very rough surface, providing additional reduction to the thermal conductivity. Additionally, we demonstrate that our methodology provides improved data sets for an accurate determination of doping concentration in NWs through electrical-based inference and excellent agreement with the available experimental data., M.R-M and R.R acknowledge financial support from MCIN/AEI/10.13039/501100011033 under grant PID2020-119777GB-I00 , and the Severo Ochoa Centres of Excellence Program under grant CEX2019-000917-S , and by the Generalitat de Catalunya under grant 2021 SGR 01519 . X.C acknowledges financial support by Spain's Ministerio de Ciencia, Innovación y Universidades under Grant No. RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), and Ministerio de Ciencia e Innovación under Grant No. PID2021-127840NB-I00 (MICINN/AEI/FEDER, UE). The authors thankfully acknowledge the computer resources, technical expertise and assistance provided by the Centro de Supercomputación de Galicia (CESGA)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electronic Transport Modulation in Ultrastrained Silicon Nanowire Devices

  • Bartmann, Maximilian G.
  • Glassner, Sebastian
  • Sistani, Masiar
  • Rurali, Riccardo
  • Palummo, Maurizia
  • Cartoixà, Xavier
  • Smoliner, Jürgen
  • Lugstein, Alois
In this work, we explore the effect of ultrahigh tensile strain on electrical transport properties of silicon. By integrating vapor-liquid-solid-grown nanowires into a micromechanical straining device, we demonstrate uniaxial tensile strain levels up to 9.5%. Thereby the triply degenerated phonon dispersion relation at the Γ-point of silicon disentangle and the longitudinal phonon modes are used to precisely determine the extent of mechanical strain. Simultaneous electrical transport measurements showed a significant enhancement in the electrical conductance. Aside from considerable reduction of the Si bulk resistivity due to strain-induced band gap narrowing, comparison with quasi-particle GW calculations further reveals that the effective Schottky barrier height at the electrical contacts undergoes a substantial reduction. For these reasons, nanowire devices with ultrastrained channels may be promising candidates for future applications of high-performance silicon-based devices., The authors gratefully acknowledge financial support by the Austrian Science Fund (FWF): Project No. P29729-N27. R.R. acknowledges financial support from MCIN/AEI/10.13039/501100011033 under grant PID2020–119777GB-I00, the Severo Ochoa Centres of Excellence Program under grant CEX2023-001263-S, and the Generalitat de Catalunya under grant 2021 SGR01519. M.P. acknowledges Union─NextGenerationEU under the Italian National Center 1 on HPC–Spoke 6: “Multiscale Modelling and Engineering Applications”. X.C acknowledges financial support by Spain’s Ministerio de Ciencia e Innovación under grant no. PID2021-127840NB-I00 (MICINN/AEI/FEDER, UE)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unravelling the origin of thermal anisotropy in PdSe2

  • Xu, Kai
  • Martínez Armesto, Luis
  • Svetlik, Josef
  • Sierra, Juan F.
  • Marinova, Vera
  • Dimitrov, Dimitre
  • Graczykowski, Bartlomiej
  • Rurali, Riccardo
  • Valenzuela, Sergio O.
  • Reparaz, J. Sebastian
We acknowledge financial support from the Spanish Ministerio de Ciencia e Innovación (MICINN) for its support through Grant CEX2023-001263-S and CEX2021-001214-S in the framework of the Spanish Severo Ochoa Centre of Excellence program, and Grants PID2020-119777GB-I00 (THERM2MAIN), and PDC2021-121814-I00 (COVEQ). We also acknowledge Grant 2021-SGR-004 4 4 (NANOPTO) from the Catalan agency AGAUR. This research was also partially supported by MICIU/AEI/10.13039/501100 011033 through R&D projects PID2022-143162OB-I00 funded by and ERDF/EU, PCI2019-103739 and Co-Funded by the European Union. K X acknowledges a fellowship (CSC201806950006) from China Scholarship Council and the PhD program in Materials Science from Universitat Autònoma de Barcelona in which he was enrolled. J S acknowledges funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 754558. J F S acknowledges support from MINECO under Contract RYC2019-028368-I/AEI/10.13039/50110 001103. B G acknowledges financial support National Center for Research and Development Grant No. EIG CONCERT-JAPAN/9/91/PETITE/2023. V M and D D acknowledge the funding from the Bulgarian Science Fund under Project Numbers FNI КП-06-ДO 02/2 and FNI КП-06-ДO 02/3, within the framework of the M-ERA program Project 'Functional 2D materials and heterostructures for hybrid spintronic-memristive devices'., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impacts of graphene quantum dots on the optical, electrical and thermal properties of the archetypal conducting polymer PEDOT:PSS

  • Kong, Minghua
  • Garriga Bacardi, Miquel
  • Reparaz, J. Sebastian
  • Alonso Carmona, M. Isabel
We investigated the optical properties and thermal conductivity of blade-coated graphene quantum dots (GQDs)/PEDOT:PSS hybrid thin films by varying the content of GQDs. The optical properties were determined by spectroscopic ellipsometry in the range of 1.2–5.5 eV. Two dispersion models were used to analyze the optical properties of the films: the Bruggeman effective medium approximation (BEMA) for the hybrid films, and the Drude model combined with a Lorentzian oscillator for both the pure and the hybrid films, which provides insight into their electrical properties. As a novel finding, we observed that the optical anisotropy of PEDOT:PSS (Aldrich 483095) films is reduced after incorporating GQDs. Moreover, dedoping of the PEDOT chains is demonstrated upon increasing the content of GQDs within the hybrid films. Furthermore, the thermal conductivity shows a two-fold decrease as the GQDs fraction increases from 0 to 10 wt%. This result is understood considering that the GQDs act as local scattering centers, resulting in a decrease of the thermal conductivity., The authors acknowledge funding from the Spanish Ministerio de Ciencia e Innovación (MICINN) through grants PDC2021-121475-I00 and PID2020-119777GB-I00 and the Spanish Severo Ochoa Centre of Excellence program CEX2019-000917-S and CEX2023-001263-S , as well as AGAUR, Generalitat de Catalunya, Spain, grant 2021-SGR-00444 . M.K. is grateful to the UAB PhD program in Materials Science in which she was enrolled and the China Scholarship Council for funding ( CSC 201809370071 ). M.K. is sincerely thankful to Bernhard Dörling and Denise Estrada-Wiese for their corrections to the English and helpful comments. We thank Agustín Mihi and Mariano Campoy-Quiles for their constant support and ideas. We acknowledge the assistance of the ICMAB-CSIC Scientific & Technical Services: Nanoquim Platform, Scanning Probe Microscopy, Electron Microscopy, and X-ray Diffraction., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Using oxides to compute with heat

  • Nataf, Guillaume F.
  • Volz, Sebastian
  • Ordonez Miranda, Jose
  • Íñiguez, Jorge
  • Rurali, Riccardo
  • Dkhil, Brahim
One of the most innovative possibilities offered by oxides is the use of heat currents for computational purposes. Towards this goal, phase-change oxides, including ferroelectrics, ferromagnets and related materials, could reproduce sources, logic units and memories used in current and future computing schemes., This Comment was cofunded by the European Union (European Research Council (ERC), DYNAMHEAT, No. 101077402; European Program FP7-NMP-LARGE-7, QUANTIHEAT, No. 604668). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or the ERC. J.Í.-G. acknowledges the funding of the Luxembourg National Research Fund (FNR) through Grant C21/MS/15799044/FERRODYNAMICS. R.R. acknowledges financial support by MCIN/AEI/10.13039/501100011033 under grant PID2020–119777GB-I00, and the Severo Ochoa Centres of Excellence Program under grant CEX2019–000917-S, and by the Generalitat de Catalunya under grant 2021 SGR 01519., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

How Concerted Are Ionic Hops in Inorganic Solid-State Electrolytes?

  • López, Cibrán
  • Rurali, Riccardo
  • Cazorla, Claudio
Despite being fundamental to the understanding of solid-state electrolytes (SSEs), little is known on the degree of coordination between mobile ions in diffusive events, thus hindering a detailed comprehension and possible rational design of SSEs. Here, we introduce an unsupervised k-means clustering approach that is able to identify ion-hopping events and correlations between many mobile ions and apply it to a comprehensive ab initio MD database comprising several families of inorganic SSEs and millions of ionic configurations. It is found that despite two-body interactions between mobile ions being the largest, higher-order n-ion (2 < n) correlations are most frequent. Specifically, we prove a general exponential decaying law for the probability density function governing the number of concerted mobile ions. For the particular case of Li-based SSEs, it is shown that the average number of correlated mobile ions amounts to 10 ± 5 and that this result is practically independent of the temperature. Interestingly, our data-driven analysis reveals that fast-ionic diffusion strongly and positively correlates with ample hopping lengths and long hopping spans but not with high hopping frequencies and short interstitial residence times. Finally, it is shown that neglection of many-ion correlations generally leads to a modest overestimation of the hopping frequency that roughly is proportional to the average number of correlated mobile ions., C.C. acknowledges support from the Spanish Ministry of Science, Innovation, and Universities under the fellowship RYC2018-024947-I and PID2020-112975GB-I00 and grant TED2021-130265B-C22. The authors thankfully acknowledge the CSIC under the “JAE Intro SOMdM 2021” grant program, the computer resources at MareNostrum, and the technical support provided by Barcelona Supercomputing Center (FI-1-0006, FI-2022-2-0003, FI-2023-1-0002, FI-2023-2-0004, and FI-2023-3-0004). R.R. acknowledges financial support from the MCIN/AEI/10.13039/501100011033 under grant no. PID2020-119777GB-I00, the Severo Ochoa Centres of Excellence Program (CEX2019-000917-S), and the Generalitat de Catalunya under grant no. 2017SGR1506., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phonon transport manipulation in TiSe2 via reversible charge density wave melting

  • Raya Moreno, Martí
  • Cazorla, Claudio
  • Canadell, Enric
  • Rurali, Riccardo
Titanium diselenide (TiSe2) is a layered material that under a critical temperature of Tc ≈ 200 K features a periodic modulation of the electron density, known as charge density wave (CDW), which finds applications in quantum information and emerging electronic devices. Here, we present first-principles calculations showing the suppression of the CDW via photoexcitation and consequent stabilization of the undistorted high-temperature phase, in agreement with experimental observations. Interestingly, the unfolded CDW melting is accompanied by a sizable reduction in the thermal conductivity, κ, of up to 25% and a large entropy increase of ~10 J K−1 kg−1. The significant κ variation is almost entirely originated from photoinduced changes in the phonon–phonon scattering processes involving a high-symmetry soft phonon mode. Our results open new possibilities in the design of devices for thermal management and phonon-based logic, and suggest original applications in the of context solid-state cooling., R.R. thanks Maurizia Palummo for the useful discussions. We acknowledge financial support by MCIN/AEI/10.13039/501100011033 under grants PID2020-119777GB-I00 and PID2022-139776NB-C61, the “Ramón y Cajal” fellowship RYC2018-024947-I and the Severo Ochoa Centres of Excellence Program (CEX2019-000917-S), and by the Generalitat de Catalunya under grant no. and 2021 SGR 01519. Calculations were performed at the Centro de Supercomputación de Galicia (CESGA) within action FI-2022-1-0012 of the Red Española de Supercomputación (RES)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

InAs–InP Superlattice Nanowires with Tunable Phonon Frequencies

  • Zannier, Valentina
  • Trautvetter, Johannes
  • Sivan, Aswathi K.
  • Rossi, Francesca
  • Matteis, Diego de
  • Abad, Begoña
  • Rurali, Riccardo
  • Sorba, Lucia
  • Zardo, Ilaria
This project had received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement No 756365) and from the Swiss National Science Foundation grant (Grant No. 184942). V.Z. acknowledges financial support from the Italian Ministry of University and Research (MUR), PRIN project (grant No. 20223WZ245). R.R. acknowledges financial support by MCIN/AEI/10.13039/501100011033 under grant PID2020-119777GB-I00, and the Severo Ochoa Centres of Excellence Program under grant CEX2019-000917-S, and by the Generalitat de Catalunya under grant 2021 SGR 01519. The authors thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources. A.K.S. acknowledges financial support from the Georg H. Endress foundation. B.A. acknowledges support from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 891443., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phonon dynamics for light dark matter detection

  • Raya Moreno, Martí
  • Kavanagh, Bradley J.
  • Fàbrega, Lourdes
  • Rurali, Riccardo
The search for low-mass dark matter (DM), which has gained much interest recently, goes in parallel with the identification of new detection channels and the development of suitable detectors. The detection of the resulting small energy depositions is challenging, requiring extremely high sensitivity only achievable by cryogenic thermal detectors, which might be put to the limit. Thus, understanding the processes that can limit the performance of these detectors can be crucial for evaluating the feasibility of the proposed new detection schemes and, eventually, designing the detectors and tuning their performance. In this paper, we focus on a promising detection scheme, the excitation of single optical phonons in polar materials, to evaluate one of the possible and less understood limiting factors of cryogenic thermal detectors, i.e., the phonon dynamics in the target/absorber. We present a detailed theoretical analysis, within an entirely ab initio scheme, of the downconversion and propagation processes undergone by optical phonons, created by the interaction of a low-mass DM particle in an Al2⁢O3 target, until they reach the interface with a phonon Al collector. After a preliminary methodological survey that reveals the limitations of any relaxation time approximation (RTA)-based method, we develop a beyond-RTA phonon Monte Carlo for three-dimensional materials that allows us to introduce the spatial dimension of the device and address questions about the impact of target size and scattering position. We also analyze the effect of the phonon energy and wave vector, and show that isotopes can, perhaps counterintuitively, result in a larger heat flux by providing transport channels of higher velocities, thus favoring detection. Our results suggest that, though challenging, the direct detection of light DM via athermal phonon generation appears feasible, and phonon downconversion followed by quasiballistic propagation does not appear to be a major bottleneck in terms of reducing the signal., We acknowledge financial support from AEI under Grant No. PID2020–119777 GB-I00, and the Severo Ochoa Centres of Excellence Program under Grant No. CEX2019-000917-S, by the Generalitat de Catalunya under grant 2021 SGR 01519, and by the Spanish NRRP through the CSIC PTI QTEP+. B. J. K. acknowledges funding from the Ramón y Cajal Grant No. RYC2021-034757-I, financed by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU”/PRTR. Calculations were performed at the Centro de Supercomputación de Galicia (CESGA) within action FI-2022-3-0031,“Phonon-based detection of ultralight dark matter,” of the Red Española de Supercomputación (RES)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Giant Photocaloric Effects across a Vast Temperature Range in Ferroelectric Perovskites

  • Rurali, Riccardo
  • Escorihuela Sayalero, Carlos
  • Tamarit, Josep Lluís
  • Íñiguez, Jorge
  • Cazorla, Claudio
Solid-state cooling presents an energy-efficient and environmentally friendly alternative to traditional refrigeration technologies that rely on thermodynamic cycles involving greenhouse gases. However, conventional caloric effects face several challenges that impede their practical application in refrigeration devices. First, operational temperature conditions must align closely with zero-field phase-transition points; otherwise, the required driving fields become excessively large. However, phase transitions occur infrequently near room temperature. Additionally, caloric effects typically exhibit strong temperature dependence and are sizable only within relatively narrow temperature ranges. In this Letter, we employ first-principles simulation methods to demonstrate that light-driven phase transitions in polar oxide perovskites have the potential to overcome such limitations. Specifically, for the prototypical ferroelectric KNbO_{3} we illustrate the existence of giant "photocaloric" effects induced by light absorption (ΔS_{PC}∼100  J K^{-1} kg^{-1} and ΔT_{PC}∼10  K) across a vast temperature range of several hundred Kelvin, encompassing room temperature. These findings are expected to be generalizable to other materials exhibiting similar polar behavior., We acknowledge financial support by the Spanish Ministry of Science under the Grants No. PID2020–119777 GB-I00, No. TED2021-130265BC22, No. PID2020–112975 GB-I00, No. RYC2018024947-I and by the Generalitat de Catalunya under the Grants No. 2021SGR-00343 and No. 2021SGR-01519. This work is part of the Severo Ochoa Excellence Programme (CEX2023-001263-S). Computational support was provided by the Red Española de Supercomputación under the Grants No. FI-2023-2-0004, No. FI-2023-30043, and No. FI-2024-1-0005. This work is part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI/10.13039/ 501100011033. Work at LIST was supported by the Luxembourg National Research Fund through Grant No. C21/MS/15799044/FERRODYNAMICS., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Lead-free room-temperature ferroelectric thermal conductivity switch using anisotropies in thermal conductivities

  • Féger, Lucile
  • Escorihuela Sayalero, Carlos
  • Rampnoux, Jean-Michel
  • Kontou, Kyriaki
  • Bah, Micka
  • Íñiguez, Jorge
  • Cazorla, Claudio
  • Monot-Laffez, Isabelle
  • Douri, Sarah
  • Grauby, Stéphane
  • Rurali, Riccardo
  • Dilhaire, Stefan
  • Gomès, Séverine
  • Nataf, Guillaume F.
Materials with on-demand control of thermal conductivity are the prerequisites to build thermal conductivity switches, where the thermal conductivity can be turned ON and OFF. However, the ideal switch, while required to develop novel approaches to solid-state refrigeration, energy harvesting, and even phononic circuits, is still missing. It should consist of an active material only, be environment friendly, and operate near room temperature with a reversible, fast, and large switching ratio. Here, we first predict by ab initio electronic structure calculations that ferroelectric domains in barium titanate exhibit anisotropic thermal conductivities. We confirm this prediction by combining frequency-domain thermoreflectance and scanning thermal microscopy measurements on a single crystal of barium titanate. We then use this gained knowledge to propose a lead-free thermal conductivity switch without inactive material, operating reversibly with an electric field. At room temperature, we find a switching ratio of 1.6 $\pm$ 0.3, exceeding the performances of state-of-the-art materials suggested for thermal conductivity switches., We thank F. Barcella, R. Doineau, and B. Negulescu for technical support for aluminum sputtering. We thank J. C. A. Abanto for technical support for developing 3D simulation for SThM measurement post-treatment. This paper was cofunded by the European Union [European Research Council (ERC), DYNAMHEAT, Grant No. 101077402; European Program FP7-NMP-LARGE-7, QUANTIHEAT, Grant No. 604668]. We acknowledge financial support by MCIN/AEI/10.13039/501100011033 under Grant No. PID2020-119777GB-I00, the “Ramón y Cajal” fellowship RYC2018-024947-I and the Severo Ochoa Centres of Excellence Program (CEX2019-000917-S), by the Generalitat de Catalunya (2021 SGR 01519), and by the Luxembourg National Research Fund (C21/MS/15799044/FERRODYNAMICS). Some of this work has been performed on the CERTeM (microelectronics technological research and development center) technological platform supported by French region Centre Val de Loire, Tours Metropolis and FEDER funds., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Doping Efficiency of Poly(benzodifurandione) from First Principles

  • Floris, Paolo Sebastiano
  • Zozoulenko, Igor
  • Rurali, Riccardo
Poly(benzodifurandione) (PBFDO) has emerged as a promising n-type conductive polymer (n-CP) for organic electronic applications, particularly in thermoelectrics (TE), due to its high doping efficiency and environmental stability. Unlike most high-performance p-type polymers, high-efficiency n-CPs are limited, posing a bottleneck in the TE module performance. In this study, we use first-principles electronic structure calculations to investigate the thermodynamic conditions that favor n-doping in PBFDO, focusing on the role of the temperature, chain length, and doping concentration. We compute the change in Gibbs free energy, ΔG, upon doping and explore how it varies with temperature and polymer chain length. Our results show that doping becomes more thermodynamically favorable at lower temperatures and in longer chains, with a strong dependence of ΔG on the doping level emerging as chain length increases. Notably, PBFDO can achieve favorable doping levels across various chain lengths and temperatures, with specific doping thresholds identified for different molecular weights. These findings suggest that lower synthesis temperatures could lead to more heavily doped, higher-conductivity PBFDO, and that chain length significantly influences achievable doping efficiency. This work provides insights for optimizing PBFDO doping strategies to enhance its performance in TE applications, bridging a key gap in organic semiconductor research., This work was financially supported by the European Commission through the Marie Skłodowska-Curie projects HORATES (GA-955837), by MCIN/AEI/10.13039/501100011033 under Grant PID2020-119777GB-I00, and the Severo Ochoa Centres of Excellence Program under Grant CEX2019-000917-S, and by the Generalitat de Catalunya under 2021 SGR 01519. The work of P.S.F. has been carried out within the Ph.D. program in Physics of the Universitat Autònoma de Barcelona (UAB). We thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical control of the thermal conductivity in BaTiO3

  • Cazorla, Claudio
  • Escorihuela Sayalero, Carlos
  • Carrete, Jesús
  • Íñiguez, Jorge
  • Rurali, Riccardo
Achieving dynamic control over thermal conductivity remains a formidable challenge in condensed matter physics and materials science, particularly due to the limitations of traditional approaches like structural modifications and doping, which yield static and often irreversible effects. In this study, a solution is demonstrated to this conundrum through light-driven manipulation of thermal conductivity in the archetypal ferroelectric BaTiO3 (BTO). We analyze, using first-principles simulations, how photoinduced charge injection triggers a ferro-to-paraelectric phase transition, yielding ultrafast, reversible changes in thermal transport properties. These results reveal a substantial reduction in lattice thermal conductivity, especially at low photoexcited charge densities, as the material undergoes a polar-to-nonpolar transformation. This reduction is primarily due to the suppression of low-frequency phonon modes, which limits heat flow as a result of enhanced phonon–phonon scattering. These findings underscore a step forward in tunable thermal conductivity, offering new prospects for efficient thermal management in advanced electronics and energy-harvesting applications., The authors acknowledge financial support by MCIN/AEI/10.13039/501100011033 under grant PID2020-119777GB-I00, TED2021-130265B-C22, PID2020-112975GB-I00, the “Ramón y Cajal” fellowship RYC2018-024947-I and the Severo Ochoa Centres of Excellence Program under grant CEX2023-001263-S, and by the Generalitat de Catalunya under grants 2021 SGR 01519 and 2021 SGR 00343. The authors thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources. Work at LIST was supported by the Luxembourg National Research Fund through Grant C21/MS/15799044/FERRODYNAMICS., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural and electronic properties of CaTiO3 polymorphs and 2D-derived systems: a theoretical investigation

  • Loletti, Marta
  • Borghesi, Costanza
  • Rurali, Riccardo
  • Giorgi, Giacomo
Abstract: Oxide perovskite materials exhibit intriguing optical and electrical properties that are widely exploited in ceramics and optoelectronic devices. With particular emphasis on its application for photocatalysis, this study aims to theoretically characterize the structural and electronic features of CaTiO<inf>3</inf>, both as a stand-alone material and as a possible component in heterostructures. By means of a campaign of ab-initio calculations, we have revised the polymorphic nature of the material through an extensive analysis of its structural and electronic properties. Although standard DFT clearly confirms its intrinsic underestimation in predicting the excited state properties, by applying the recently introduced DFT-12 method to the bandgap and dispersion calculations, we find very good agreement with experimental reported data. Finally, we include the investigation of dimensionally reduced CaTiO<inf>3</inf>-based surfaces and nanosheets, opening the way to interesting possibilities for additional novel supports and photocatalysts with unique features., R.R. acknowledges financial support by MCIN/AEI/10.13039/501100011033 under Grant No. PID2020-119777GB-I00, the Severo Ochoa Centres of Excellence Program under Grant No. CEX2019-000917-S, the Generalitat de Catalunya under Grant No. and 2021 SGR 01519, and Fondazione Cariplo through the project 2021-0855 SCORE-Solar Energy for Circular Photoconversion and Chemicals Regeneration, in the frame of the 2021 call on circular economy. The authors thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources. M.L. and G.G. acknowledge financial support under the National Recovery and Resilience Plan (NRRP), Mission 4, Component 2, Investment 1.1, Call for tender No. 104 published on 2.2.2022 by the Italian Ministry of University and Research (MUR), funded by the European Union-NextGenerationEU-Project Title 2022LZWKAJ_002 Engineered nano-heterostructures for a new generation of titania photocatalytic films (ENTI)-CUP J53D23003470006-Grant Assignment Decree No. 966 adopted on 30.06.2023 by the Italian Ministry of University and Research (MUR). M.L., C.B., and G.G. acknowledge ISCRA initiatives for awarding access to computing resources at CINECA SuperComputer Center, Italy. G.G. thanks the European Union-NextGenerationEU under the Italian Ministry of University and Research (MUR) National Innovation Ecosystem grant ECS00000041-VITALITY for funding and acknowledges the Università degli Studi di Perugia and MUR for support within the project Vitality., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microstructural Evolution Dominates the Changes in theThermal Conductivity of Conjugated Polymers Upon Doping

  • Guo, Jiali
  • Xu, Kai
  • Asatryan, Jesika
  • Alonso Navarro, Matías Jesús
  • Zapata Arteaga, Osnat
  • Craighero, Mariavittoria
  • Perevedentsev, Aleksandr
  • Kroon, Renee
  • Ramos, María Mar
  • Segura, José L.
  • Martín, Jaime
  • Müller, Christian
  • Reparaz, J. Sebastian
  • Campoy Quiles, Mariano
In this study, the correlation between the changes in microstructure of conjugated polymers upon doping and their concomitant thermal transport properties is elucidated. Eight conjugated polymers across distinct doping systems are examined: molecular dopants, Lewis acid type dopants, and ion-exchange systems. These findings indicate that, upon doping, there is a decrease in out-of-plane thermal conductivity for five polymers characterized by high structural order, such as those based on thiophene, diketopyrrolopyrrole, and terthiophene-naphthalimide copolymers. Conversely, for polymers with less ordered structures, including regioregular poly(3-hexylthiophene) and thiophene-based polymers with oligoether side chains, an increase in out-of-plane thermal conductivity is observed. To elucidate these trends, several hypotheses are examined: i) enhanced intrinsic thermal anisotropy originating from backbone orientation, ii) variations in the crystalline to amorphous fraction, and (iii) alloying effects resulting from dopant incorporation. Grazing incidence wide-angle X-ray scattering reveals that in-plane alignment exerts a direct influence on both in-plane and out-of-plane thermal conductivities. Photooxidation experiments provide further insights into the role of alloy scattering. Ultimately, the in-plane thermoelectric figure of merit is ascertained for two diketopyrrolopyrrole-based polymers, underscoring the critical importance of measuring thermal and electrical properties in the same orientation to ensure precise thermoelectric evaluation., The authors acknowledge funding from the European Union's Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie grant agreement no. 955837 (HORATES). The authors acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades and the for its support through Grant CEX2023- in the framework of the Spanish Severo Ochoa Centre of Excellence, and Grants PID2021-128924OB-I00, PID2020-119777GB-I00 (THERM2MAIN), PID2022-138908NB-C33, and PDC2021-121814-I00 (COVEQ). The authors also acknowledge Grant 2021-SGR-00444 (NANOPTO) from the Catalan agency AGAUR. The authors acknowledge Dr. Bernhard Dörling for support with thermoelectric measurements and Dr. Agustín Mihi as well as ICMAB-CSIC for access to and support with the FTIR equipment. This work has been carried out within the framework of the doctoral program in Material Science at the Universitat Autònoma de Barcelona in which J. G. was enrolled. The authors acknowledge support for the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unleashing the Impact of Topological Surface States on the Thermoelectric Properties of Granular Sb2Te3 Thin Films Deposited on Flexible Substrates

  • Locatelli, Lorenzo
  • Rossi, Pietro
  • Kumar, Arun
  • Wiemer, Claudia
  • Lamperti, Alessio
  • Mantovan, Roberto
  • Raciti, Grazia
  • Xu, Kai
  • Reparaz, J. Sebastian
  • Caironi, Mario
  • Pace, Giuseppina
Between thermoelectric materials, topological insulators (TIs) such as Sb2Te3 can effectively decouple phonon and electronic transport. Recent works mostly focused on TI composites or superlattices, where the contribution of the topological surface states (TSS) to the thermoelectric properties is overshadowed by other mechanisms such as energy filtering or electronic band reorganization. Here, we investigate efficient thermoelectric Sb2Te3 polycrystalline thin films deposited on plastic foil. Magneto-transport studies show that the presence of TSS in more granular films is responsible for the 2-orders of magnitude higher electronic conductivity compared to thick films owing to larger crystalline domains (> 100 nm). The prevalence of the bulk states in thick films reduces both their thermal and electronic conductivity; however, they are responsible for an increase in the Seebeck coefficient. Overall, we show that to achieve higher thermoelectric performance of single-component TI films, it is necessary to tune the relative contribution of topological and bulk states. This will potentially allow for the development of cost-effective thermoelectric generators, reducing the complexity of competitive systems based on multicomponent heterostructures., Financial support is acknowledged from the Spanish Ministerio de Ciencia e Innovación (MICINN) for its support through Grant CEX2023–001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence program and Grants PID2020–119777GB-I00 (THERM2MAIN) and PDC2021–121814-I00 (COVEQ). G. Raciti acknowledges financial support from Eucor, The European Campus (Marie Sklodowska-Curie QUSTEC grant agreement no. 847471) and the Swiss National Science Foundation (Project Grant no. CRSII5 189924)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Room-temperature anisotropic in-plane spin dynamics in graphene induced by PdSe2 proximity

  • Sierra, Juan F.
  • Světlík, Josef
  • Savero Torres, Williams
  • Camosi, Lorenzo
  • Herling, Franz
  • Guillet, Thomas
  • Xu, Kai
  • Reparaz, J. S.
  • Marinova, Vera
  • Dimitrov, Dimitre
  • Valenzuela, Sergio O.
van der Waals heterostructures provide a versatile platform for tailoring electrical, magnetic, optical and spin transport properties via proximity effects. Hexagonal transition metal dichalcogenides induce valley Zeeman spin–orbit coupling in graphene, creating spin lifetime anisotropy between in-plane and out-of-plane spin orientations. However, in-plane spin lifetimes remain isotropic due to the inherent heterostructure’s three-fold symmetry. Here we demonstrate that pentagonal PdSe2, with its unique in-plane anisotropy, induces anisotropic gate-tunable spin–orbit coupling in graphene. This enables a tenfold modulation of spin lifetimes at room temperature, depending on the in-plane spin orientation. Moreover, the directional dependence of the spin lifetimes, along the three spatial directions, reveals a persistent in-plane spin texture component that governs the spin dynamics. These findings advance our understanding of spin physics in van der Waals heterostructures and pave the way for designing topological phases in graphene-based heterostructures in the strong spin–orbit coupling regime., We thank J. H. García, A. W. Cummings and S. Roche for insightful discussions. This research was partially supported by MICIU/AEI/10.13039/501100011033 through grants no. PID2022-143162OB-I00 and Severo Ochoa Programme CEX2021-001214-S, FEDER, and by the European Union’s Horizon 2020 (H2020) FET-PROACTIVE project TOCHA under grant agreement no. 824140. ICN2 acknowledges support from PCI2019-103739 funded by MICIU/AEI/10.13039/501100011033 and V.M. and D.D. acknowledge support from the Bulgarian Science Fund under grant nos. DFNI KΠ-06-ДO 02/2 and DFNI KΠ-06-ДO 02/3, within the framework of the M-ERA program project 2D-SPIN-MEM ‘Functional 2D materials and heterostructures for hybrid spintronic memristive devices’. J.S.R. acknowledges financial support from MICIU/AEI/10.13039/501100011033 through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S), and grants PID2020-119777GB-I00 (THERM2MAIN) and PDC2021-121814-I00 (COVEQ). J.S. thanks H2020 Marie Skłodowska-Curie grant agreement no. 713673., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Narrow-Diameter Tubular One-Dimensional van der Waals Heterostructures

  • Pach, Elzbieta
  • Kierkowicz, Magdalena
  • Kurttepeli, Mert
  • Frontera, Carlos
  • Borghesi, Costanza
  • Giorgi, Giacomo
  • Rurali, Riccardo
  • Bals, Sara
  • Tendeloo, Gustaaf van
  • Tobias, Gerard
  • Ballesteros, Belén
The inherent flexibility of individual layers in two-dimensional (2D) materials enables them to be rolled up into tubular structures, thereby combining the properties of 1D and 2D materials and further expanding their range of applications. Even greater opportunities arise when two or more layers of different materials are combined forming 1D tubular van der Waals heterostructures. Herein, we report on the synthesis, structural characterization, and electronic properties of narrow 1D van der Waals heterostructures, with internal diameters as low as ~1 nm. These are achieved by template-assisted growth of highly crystalline, single-layer lutetium halide (LuX₃, X = Cl, Br, I) nanotubes confined within the cavities of single-walled carbon nanotubes. Aberration-corrected electron microscopy, along with image simulation, has been employed to evaluate the role that the halide plays in the formation of such narrow heterostructures. The crystal structure of the employed halides has been determined by means of synchrotron radiation, and DFT calculations of the resulting metal halide nanotubes reveal a rich relationship between chirality and electronic/optical properties. The observed spatial separation of band-edge states can be important for photovoltaic applications facilitating the separation of photogenerated electron-hole pairs., We acknowledge financial support by Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through grants PID2020-113805GB-I00, PID2020-119777GB-I00 and PID2023-146263NB-I00, and Severo Ochoa Programme for Centres of Excellence in R&D (ICN2, CEX2021-001214-S; ICMAB, CEX2023-001263-S). We acknowledge funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. We also acknowledge support from Generalitat de Catalunya (grant 2021SGR00439, 2021SGR00457, 2021SGR01519). GG also acknowledges the European Union - NextGenerationEU under the Italian Ministry of University and Research (MUR) National Innovation Ecosystem grant ECS00000041 - VITALITY - CUP J97G22000170005. We thank the Alba Synchrotron Light Source for the provision of beamtime and Dr. F. Fauth for his assistance during data collection. We acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). G.G. acknowledges the CINECA award under the ISCRA initiative, for the availability of high-performance computing resources and support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Suppressing Thermal Conductivity in SrTiO3 by Introducing Oxygen Isotope Disorder

  • Zang, Yipeng
  • Geng, Zhiming
  • Di, Chen
  • Zheng, Ningchong
  • Fang, Xinwei
  • Yan, Xuejun
  • Gu, Zhengbin
  • Torres, Pol
  • Íñiguez, Jorge
  • Huang, Rong
  • Li, Fangsen
  • Rurali, Riccardo
  • Chen, Yanfeng
  • Pan, Xiaoqing
  • Lu, Minghui
  • Wang, Shouguo
  • Nie, Yuefeng
Transition metal oxides are promising candidates in the field of thermoelectricity, which can convert heat and electricity into each other and realize the efficient utilization of waste energy. For the figure of merit ZT = S2σT/(κe + κl), a lower thermal conductivity is desired for an enhanced ZT, and cation doping is an appropriate way to regulate the thermal transport properties. However, because S, σ, and κe are strongly coupled with each other, cation doping for one parameter modification can generate compensation with others, making regulation more difficult. In this work, we demonstrate the effective engineering of the thermal conductivity of SrTiO3 films by partial oxygen isotope substitution with 18O using a straightforward aftergrowth thermal annealing process. The results show that the isotope disorder promotes the scattering of phonons and generates a nearly 20% decreased thermal conductivity of SrTiO3 films. Our work provides a convenient new route for the design of thermoelectric materials with high ZT values., This work was supported by the National Basic Research (Key R&D) Program of China (2021YFA1400400 and 2022YFA1402502), the National Natural Science Foundation of China (12134008, 52394162, 52027803) and the Natural Science Foundation of Education Department of Anhui Province-key project (2024AH050082). Theoretical work was funded by MCIN/AEI/10.13039/501100011033 under Grant PID2020-119777GB-I00, the Severo Ochoa Centres of Excellence Program under Grant CEX2019-000917-S, the Generalitat de Catalunya under Grant 2021 SGR 01519, and the Luxembourg National Research Fund under Grant C21/MS/15799044/FERRODYNAMICS. The authors thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources. The authors are grateful for the technical support for Nano-X from Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences (SINANO)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal Rectification in Telescopic Nanowires: Impact of Thermal Boundary Resistance

  • Kaur, Yashpreet
  • Tachikawa, Saeko
  • Swinkels, Milo Yaro
  • López-Suárez, Miquel
  • Camponovo, Matteo
  • Ruiz Caridad, Alicia
  • Kim, Wonjong
  • Fontcuberta i Morral, Anna
  • Rurali, Riccardo
  • Zardo, Ilaria
A thermal diode, which, by analogy to its electrical counterpart, rectifies heat current, is the building block for thermal circuits. To realize a thermal diode, we demonstrate thermal rectification in a GaAs telescopic nanowire system using the thermal bridge method. We measured a preferred direction of heat flux, achieving rectification values ranging from 2 to 8% as a function of applied thermal bias. We demonstrate that the thermal boundary resistance between the thin part with the wurtzite crystal phase and the thick part with the zinc-blende crystal phase of the telescopic nanowire plays a crucial role in determining the amount and direction of heat flux rectification. This effect is confirmed by numerical solutions of the one-dimensional heat equation based on ab initio data. Additionally, we accounted for the effect of the thermal contact resistance. This work is the first experimental indication of rectification using a telescopic nanowire where we reveal the importance and role of the thermal boundary resistance in determining thermal rectification., We thank Faustino Martelli and Lorenzo Di Mario for fruitful discussion. This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 756365). R.R. and M.L.S. acknowledge financial support by MCIN/AEI/10.13039/501100011033 under grant PID2020-119777GB-I00, the Severo Ochoa Centres of Excellence Program under grant CEX2023-001263-S, and by the Generalitat de Catalunya under grant 2021 SGR 01519. We thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Giant multiphononic effects in a perovskite oxide

  • Cazorla Silva, Claudio|||0000-0002-6501-4513
  • Stengel, Massimiliano
  • Íñiguez, Jorge
  • Rurali, Riccardo
Perovskite oxides offer tremendous potential for applications in information storage and energy conversion, owing to a subtle interplay between their spin, charge, orbital and lattice degrees of freedom. Here, we further expand the possible range of perovskite oxides operation towards the fields of thermal management and thermal computing by exploiting an exceptional synergy between different ferroic orders. We propose dynamical control of the heat flow in a distinctive family of perovskite oxides obtained via the application of small electric (~10¿kV/cm) and/or magnetic (~1¿T) fields. Based on first-principles simulations, we predict a relative heat conductivity variation of ~100% in SrMnO3 thin films near room temperature resulting from a phase transition that involves huge changes in both the magnetization and electric polarization. The disclosed giant multiphononic effects are fundamentally caused by anharmonic spin-phonon couplings that strongly influence the mean lifetime of phonons., We acknowledge financial support by MCIN/AEI/10.13039/501100011033 under grant PID2020-119777GB-I00, the Ramón y Cajal fellowship RYC2018-024947-I and the Severo Ochoa Centres of Excellence Program (CEX2019-000917-S), and by the Generalitat de Catalunya under grant no. and 2017 SGR 1506. Calculations were performed at the Centro de Supercomputación de Galicia (CESGA) within action FI2022-1-0012 of the Red Española de Supercomputación (RES). We also thank the support of the Luxembourg National Research Fund through project FNR/C18/MS/ 12705883/REFOX (J.Í.)., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optical Control of the Thermal Conductivity in BaTiO<sub>3</sub>

  • Cazorla, Claudio
  • Escorihuela-Sayalero, Carlos
  • Carrete, Jesús
  • Íñiguez-González, Jorge
  • Rurali, Riccardo
Achieving dynamic control over thermal conductivity remains a formidable challenge in condensed matter physics and materials science, particularly due to the limitations of traditional approaches like structural modifications and doping, which yield static and often irreversible effects. In this study, a solution is demonstrated to this conundrum through light‐driven manipulation of thermal conductivity in the archetypal ferroelectric BaTiO3 (BTO). We analyze, using first‐principles simulations, how photoinduced charge injection triggers a ferro‐to‐paraelectric phase transition, yielding ultrafast, reversible changes in thermal transport properties. These results reveal a substantial reduction in lattice thermal conductivity, especially at low photoexcited charge densities, as the material undergoes a polar‐to‐nonpolar transformation. This reduction is primarily due to the suppression of low‐frequency phonon modes, which limits heat flow as a result of enhanced phonon–phonon scattering. These findings underscore a step forward in tunable thermal conductivity, offering new prospects for efficient thermal management in advanced electronics and energy‐harvesting applications.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Giant multiphononic effects in a perovskite oxide

  • Cazorla Silva, Claudio
  • Stengel, Massimiliano
  • Íñiguez, Jorge
  • Rurali, Riccardo
Perovskite oxides offer tremendous potential for applications in information storage and energy conversion, owing to a subtle interplay between their spin, charge, orbital and lattice degrees of freedom. Here, we further expand the possible range of perovskite oxides operation towards the fields of thermal management and thermal computing by exploiting an exceptional synergy between different ferroic orders. We propose dynamical control of the heat flow in a distinctive family of perovskite oxides obtained via the application of small electric (~10¿kV/cm) and/or magnetic (~1¿T) fields. Based on first-principles simulations, we predict a relative heat conductivity variation of ~100% in SrMnO3 thin films near room temperature resulting from a phase transition that involves huge changes in both the magnetization and electric polarization. The disclosed giant multiphononic effects are fundamentally caused by anharmonic spin-phonon couplings that strongly influence the mean lifetime of phonons., We acknowledge financial support by MCIN/AEI/10.13039/501100011033 under grant PID2020-119777GB-I00, the Ramón y Cajal fellowship RYC2018-024947-I and the Severo Ochoa Centres of Excellence Program (CEX2019-000917-S), and by the Generalitat de Catalunya under grant no. and 2017 SGR 1506. Calculations were performed at the Centro de Supercomputación de Galicia (CESGA) within action FI2022-1-0012 of the Red Española de Supercomputación (RES). We also thank the support of the Luxembourg National Research Fund through project FNR/C18/MS/ 12705883/REFOX (J.Í.)., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Highly Aligned Bacterial Nanocellulose Films Obtained During Static Biosynthesis in a Reproducible and Straightforward Approach

  • Murugarren, Nerea|||0000-0003-0251-4358
  • Roig-Sanchez, Soledad|||0000-0002-7474-3769
  • Anton-Sales, Irene|||0000-0003-3511-2574
  • Malandain, Nanthilde|||0000-0001-6447-2726
  • Xu, Kai|||0000-0001-6999-1904
  • Solano, Eduardo|||0000-0002-2348-2271
  • Reparaz, Juan Sebastian
  • Laromaine, Anna|||0000-0002-4764-0780
Bacterial nanocellulose (BNC) is usually produced as randomly-organized highly pure cellulose nanofibers films. Its high water-holding capacity, porosity, mechanical strength, and biocompatibility make it unique. Ordered structures are found in nature and the properties appearing upon aligning polymers fibers inspire everyone to achieve highly aligned BNC (A-BNC) films. This work takes advantage of natural bacteria biosynthesis in a reproducible and straightforward approach. Bacteria confined and statically incubated biosynthesized BNC nanofibers in a single direction without entanglement. The obtained film is highly oriented within the total volume confirmed by polarization-resolved second-harmonic generation signal and Small Angle X-ray Scattering. The biosynthesis approach is improved by reusing the bacterial substrates to obtain A-BNC reproducibly and repeatedly. The suitability of A-BNC as cell carriers is confirmed by adhering to and growing fibroblasts in the substrate. Finally, the thermal conductivity is evaluated by two independent approaches, i.e., using the well-known 3 ω -method and a recently developed contactless thermoreflectance approach, confirming a thermal conductivity of 1.63 W mK -1 in the direction of the aligned fibers versus 0.3 W mK -1 perpendicularly. The fivefold increase in thermal conductivity of BNC in the alignment direction forecasts the potential of BNC-based devices outperforming some other natural polymer and synthetic materials. Bacteria confined and statically incubated for a few days biosynthesized bacterial nanocellulose (BNC) nanofibers in a single direction without entanglement. The obtained film is highly oriented within the total volume of the film, and it shows a five-fold increase in thermal conductivity in the parallel direction forecasting the potential of BNC-based devices outperforming some other natural polymer and synthetic materials.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

In-plane thermal diffusivity determination using beam-offset frequency-domain thermoreflectance with a one-dimensional optical heat source

  • Xu, Kai|||0000-0001-6999-1904
  • Guo, Jiali
  • Raciti, Grazia
  • Goñi, Alejandro|||0000-0002-1193-3063
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Zardo, Ilaria|||0000-0002-8685-2305
  • Campoy-Quiles, Mariano|||0000-0002-8911-640X
  • Reparaz, Juan Sebastian
We present an innovative contactless method suitable to study in-plane thermal transport based on beam-offset frequency-domain thermoreflectance using a one-dimensional heat source with uniform power distribution. Using a one-dimensional heat source provides a number of advantages as compared to point-like heat sources, as typically used in time- and frequency-domain thermoreflectance experiments, just to name a few: (i) it leads to a slower spatial decay of the temperature field in the direction perpendicular to the line-shaped heat source, allowing to probe the temperature field at larger distances from the heater, hence, enhancing the sensitivity to in-plane thermal transport; (ii) the frequency range of interest is typically <100 kHz. This rather low frequency range is convenient regarding the cost of the required excitation laser system but, most importantly, it allows the study of materials without the presence of a metallic transducer with almost no influence of the finite optical penetration depth of the pump and probe beams on the thermal phase lag, which arises from the large thermal penetration depth imposed by the used frequency range. We also show that for the case of a harmonic thermal excitation source, the phase lag between the thermal excitation and thermal response of the sample exhibits a linear dependence with their spatial offset, where the slope is proportional to the inverse of the thermal diffusivity of the material. We demonstrate the applicability of this method to the cases of: (i) suspended thin films of Si and PDPP4T, (ii) Bi bulk samples, and (iii) Si, glass, and highly-oriented pyrollitic graphite (HOPG) bulk samples with a thin metallic transducer. Finally, we also show that it is possible to study in-plane heat transport on substrates with rather low thermal diffusivity, e.g., glass, even using a metallic transducer. We achieve this by an original approach based on patterning the transducer using focused ion beam, with the key purpose of limiting in-plane heat transport through the thin metallic transducer.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Degradation of the ZT thermoelectric figure of merit in silicon when nanostructuring, From bulk to nanowires

  • Raya Moreno, Martí|||0000-0001-6190-9769
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Cartoixà, Xavier|||0000-0003-1905-5979
Since the landmark paper by Hicks and Dresselhaus [Phys. Rev. B 47, 16631(R) (1993)], there has been a general consensus that one-dimensional nanoscale conductors, i.e. nanowires, provide the long sought paradigm to implement the so-called phonon-glass electron-crystal material, which results in large improvements in the thermoelectric figure of merit ZT. Despite some encouraging-though isolated-experimental results, this idea has never been subjected to a rigorous scrutiny and the effect of the coupled dynamics of electrons and phonons has usually been oversimplified. To bypass these limitations, we have calculated the effective thermoelectric parameters for silicon nanowires (SiNWs) by iteratively solving the coupled electron-phonon Boltzmann transport equation (EPBTE) supplied with first-principles data. This allows for an unprecedented precision in determining the correct dependence of the thermoelectric parameters with system size; including, but not limited to, the figure of merit and its enhancement or degradation due to nanostructuring. Indeed, we demonstrate that the commonly used relaxation time approximation (RTA), or the uncoupled beyond the RTA (iterative) solution fail to describe the correct effect of nanostructuring on the thermoelectric properties and efficiency in SiNWs due to the strong contribution of phonon drag to the Seebeck coefficient, so that the use of fully coupled solution of the EPBTE is essential to obtain the correct effect of nanostructuring. Most importantly, we show that, contrarily to what commonly argued, resorting to NWs is not necessarily beneficial for ZT. Indeed, in a wide range of diameters nanostructuring diminishes the Seebeck coefficient faster than the decrease in thermal conductivity, due to the suppression of very long wavelength phonons responsible for the largest contribution to the phonon drag component of the Seebeck coefficient. This penalty to ZT can be mitigated if the NWs have a very rough surface, providing additional reduction to the thermal conductivity. Additionally, we demonstrate that our methodology provides improved data sets for an accurate determination of doping concentration in NWs through electrical-based inference and excellent agreement with the available experimental data.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Reliably straining suspended van der Waals heterostructures

  • Nazzari, Daniele|||0000-0003-4267-3142
  • Genser, Jakob
  • Sistani, Masiar|||0000-0001-5730-234X
  • Bartmann, Maximilian G.|||0000-0002-9556-1550
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Weber, Walter M.|||0000-0001-9504-5671
  • Lugstein, Alois|||0000-0001-5693-4775
2D materials provide a rapidly expanding platform for the observation of novel physical phenomena and for the realization of cuttingedge optoelectronic devices. In addition to their peculiar individual characteristics, 2D materials can be stacked into complex van der Waals heterostructures, greatly expanding their potential. Moreover, thanks to their excellent stretchability, strain can be used as a powerful control knob to tune or boost many of their properties. Here, we present a novel method to reliably and repeatedly apply a high uniaxial tensile strain to suspended van der Waals heterostructures. The reported device is engineered starting from a silicon-on-insulator substrate, allowing for the realization of suspended silicon beams that can amplify the applied strain. The strain module functionality is demonstrated using singleand double-layer graphene layers stacked with a multilayered hexagonal boron nitride flake. The heterostructures can be uniaxially strained, respectively, up to ∼1.2% and ∼1.8%.