Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 56
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Structure Dependent Photostability of ITIC and ITIC-4F

  • Ciammaruchi, Laura
  • Zapata Arteaga, Osnat
  • Gutiérrez Fernández, Edgar
  • Martín Pérez, Jaime
  • Campoy Quiles, Mariano
Strong synthetic and engineering efforts have taken the efficiency of non-fullerene acceptor (NFA) based organic solar cells above 18% in a few years. Nonetheless, a deep understanding of the fundamental properties of this class of molecules is still missing. Here, we systematically investigated the morphological properties of two high efficient indacenodithienothiophene-based NFAs - namely ITIC and ITIC-4F - in order to correlate the hydrogen/fluorination substitutions with the materials structural and stability properties. We confirm that each NFA structurally evolves with increasing temperature into several polymorphs, identifying through spectroscopy their corresponding narrow temperature ranges. We demonstrate that the materials' response to accelerated stress tests (ASTs) is both substitution and polymorph dependent. ASTs underlined that the most vulnerable molecular segment corresponds to the thienothiophene C?C bond along the central backbone, together with the C?C linkage between the electron-rich donor and the electron-deficient acceptor moieties, with a degradation process triggered by oxygen and light. ITIC-4F showed lower oxidation capability and a higher bond strength retaining effect compared to ITIC. Lastly, the AST approach employed here allowed for the extrapolation of morphological and stability-related features within a high-throughput framework, and can be considered as a valuable methodological tool for future stability-related studies, The authors would like to thank Dr Tommaso Salzillo and Dr Valentina Bulova for very fruitful scientific discussions. The authors kindly acknowledge the financial support from Ministerio de Economia y Competitividad of Spain through the "Severo Ochoa" Programme for Centres of Excellence in R&D and projects PGC2018-095411-B-I00 and PGC2018-094620-A-I00, as well as the European Research Council (ERC) under grant agreement no. 648901
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Reduction of the Lattice Thermal Conductivity of Polymer Semiconductors by Molecular Doping

  • Zapata Arteaga, Osnat
  • Perevedentsev, Aleksandr
  • Marina Barbier, Sara Luisa
  • Martín Pérez, Jaime
  • Sebastián Reparaz, Juan
  • Campoy Quiles, Mariano
Here we show that molecular doping of polymer thermoelectrics increases the electrical conductivity while reducing the thermal conductivity. A high-throughput methodology based on annealing and doping gradients within individual films is employed to self-consistently analyze and correlate electrical and thermal characteristics for the equivalent of >100 samples. We focus on the benchmark material system poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT) doped with molecular acceptor 2,3,5,6-tetrafittoro-7,7,8,8-tetra-cyanoquinodimethane (F4TCNQ). The thermal conductivity of neat PBTTT films is dominated by the degree of crystallinity, with thermal percolation observed for annealing temperatures >170 degrees C. Upon doping the samples with a relatively low amount of F4TCNQ (anion content <1 mol %), the thermal conductivity exhibits a two-fold reduction without compromising the crystalline quality, which resembles the effect of alloy scattering observed in several inorganic systems. The analysis of the relation between thermal and electrical conductivities shows that thermal transport is dominated by a doping-induced reduced lattice contribution., We acknowledge financial support from the Spanish Ministry of Science and Innovation through projects PGC2018-095411-B-I00 and MAT2017-90024-P (TANGENTS)-EI/FEDER, UE projects; the Generalitat de Catalunya through grants 2017SGR488 and AGAUR 2018 PROD 00191; and from the European Research Council (ERC) under grant agreement no. 648901. O.Z.-A. acknowledges CONACYT-SENER for his Ph.D. scholarship (no. 472571). J.M. thanks MCIU for the Ramo ' n y Cajal contract and grant PGC2018-094620-A-I00. We thank Dr. Agusti ' n Mihi for the access to and support with the FTIR equipment. We acknowledge the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). We thank Andre ' s Gom ' ez Rodrig ' uez from the Scanning Probe Microscopy Laboratory (ICMAB-CSIC) for a set of AFM measurements. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI).
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Suppressing Co-Crystallization of Halogenated Non-Fullerene Acceptors for Thermally Stable Ternary Solar Cells

  • Hultmark, Sandra
  • Paleti, Sri Harish Kumar
  • Harillo, Albert
  • Marina Barbier, Sara Luisa
  • Nugroho, Ferry Anggoro Ardy
  • Liu, Yanfeng
  • Ericsson, Leif K. E.
  • Li, Ruipeng
  • Martín Pérez, Jaime
  • Bergqvist, Jonas
  • Langhammer, Christoph
  • Zhang, Fengling
  • Yu, Liyang
  • Campoy Quiles, Mariano
  • Moons, Ellen
  • Baran, Derya
  • Mueller, Christian
While photovoltaic blends based on non-fullerene acceptors are touted for their thermal stability, this type of acceptor tends to crystallize, which can result in a gradual decrease in photovoltaic performance and affects the reproducibility of the devices. Two halogenated indacenodithienothiophene-based acceptors that readily co-crystallize upon mixing are studied, which indicates that the use of an acceptor mixture alone does not guarantee the formation of a disordered mixture. The addition of the donor polymer to the acceptor mixture readily suppresses the crystallization, which results in a fine-grained ternary blend with nanometer-sized domains that do not coarsen due to a highT(g)approximate to 200 degrees C. As a result, annealing at temperatures of up to 170 degrees C does not markedly affect the photovoltaic performance of ternary devices, in contrast to binary devices that suffer from acceptor crystallization in the active layer. The results indicate that the ternary approach enables the use of high-temperature processing protocols, which are needed for upscaling and high-throughput fabrication of organic solar cells. Further, ternary devices display a stable photovoltaic performance at 130 degrees C for at least 205 h, which indicates that the use of acceptor mixtures allows to fabricate devices with excellent thermal stability., S.H. and S.H.K.P. contributed equally to this work. The authors acknowledge the King Abdullah University of Science and Technology (KAUST) Office of Sponsored Research (OSR) under OSR-2018-CPF-4106 and the Knut and Alice Wallenberg Foundation through the project "Mastering Morphology for Solution-borne Electronics" (2016.0059) for funding. M.C.-Q. and A.H. acknowledge the European Research Council (ERC) for funding under grant agreement no. 648901. The authors thank MCIU for a Ramon y Cajal contract, Ikerbasque Foundation for the Fellow program (J.M) and grants Ref. PGC2018-094620-A-100, SEV-2015-0496 and PGC2018-095411-B-100. L.Y. thanks the National Nature Science Foundation of China (NSFC 21905185) for financial support. The authors thank the National Synchrotron Light Source II, Brookhaven National Lab (Suffolk, Upton, New York, USA) for beamtime.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Design Rules for Polymer Blends with High Thermoelectric Performance

  • Zapata-Arteaga, Osnat
  • Marina, Sara
  • Zuo, Guangzheng
  • Xu, Kai
  • Dörling, Bernhard
  • Pérez, Luis Alberto
  • Reparaz, Juan Sebastian
  • Martín, Jaime
  • Kemerink, Martijn
  • Campoy-Quiles, Mariano
[Abstract] A combinatorial study of the effect of in-mixing of various guests on the thermoelectric properties of the host workhorse polymer poly[2,5-bis(3-tetradecylthiophen- 2-yl)thieno[3,2-b]thiophene] (PBTTT) is presented. Specifically, the composition and thickness for doped films of PBTTT blended with different polymers are varied. Some blends at guest weight fractions around 10–15% exhibit up to a fivefold increase in power factor compared to the reference material, leading to zT values around 0.1. Spectroscopic analysis of the charge-transfer species, structural characterization using grazing-incidence wide-angle X-ray scattering, differential scanning calorimetry, Raman, and atomic force microscopy, and Monte Carlo simulations are employed to determine that the key to improved performance is for the guest to promote long-range electrical connectivity and low disorder, together with similar highest occupied molecular orbital levels for both materials in order to ensure electronic connectivity are combined., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa’ Program for Centers of Excellence in R&D (No. CEX2019-000917-S) and projects PGC2018-095411- B-I00, PGC2018-094620-A-I00, and MAT2017-90024-P (TANGENTS)-EI/Fondo Europeo de Desarrollo Regional and from the European Research Council (ERC) under Grant Agreements Nos. 648901 and 963954. J.M. thanks Ministerio de Ciencia, Innovación y Universidades for the Ramón y Cajal contract. The authors are thankful to Dr. Agustín Mihi for access and support with the FTIR equipment. The authors acknowledge the European funding (European Regional Development Fund and European Social Fund). The authors thank Andrés Gómez Rodríguez from the Scanning Probe Microscopy Laboratory (ICMAB-CSIC) for a set of fine AFM measurements. GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. Finally, the authors acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unidad de Recursos de Información Científica para la Investigación (URICI). M.K. thanks the Carl Zeiss Foundation for financial support. G.Z. acknowledges the support from Alexander von Humboldt Foundation
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

On The Thermal Conductivity of Conjugated Polymers for Thermoelectrics

  • Rodríguez-Martínez, Xabier
  • Martín, Jaime
  • Campoy-Quiles, Mariano
[Abstract]: The thermal conductivity (κ) governs how heat propagates in a material, and thus is a key parameter that constrains the lifetime of optoelectronic devices and the performance of thermoelectrics (TEs). In organic electronics, understanding what determines κ has been elusive and experimentally challenging. Here, by measuring κ in 17 π-conjugated materials over different spatial directions, it is statistically shown how microstructure unlocks two markedly different thermal transport regimes. κ in long-range ordered polymers follows standard thermal transport theories: improved ordering implies higher κ and increased anisotropy. κ increases with stiffer backbones, higher molecular weights and heavier repeat units. Therein, charge and thermal transport go hand-in-hand and can be decoupled solely via the film texture, as supported by molecular dynamics simulations. In largely amorphous polymers, however, κ correlates negatively with the persistence length and the mass of the repeat unit, and thus an anomalous, albeit useful, behavior is found. Importantly, it is shown that for quasi-amorphous co-polymers (e.g., IDT-BT) κ decreases with increasing charge mobility, yielding a 10-fold enhancement of the TE figure-of-merit ZT compared to semi-crystalline counterparts (under comparable electrical conductivities). Finally, specific material design rules for high and low κ in organic semiconductors are provided., The authors would like to acknowledge financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Programme for Centers of Excellence in R&D and project reference PID2021- 128924OB-I00 as well acknowledge Prof. Alejandro R. Goñi (ICMAB-CSIC, ICREA) for his valuable help in setting up the Raman thermometry measurement platform. The authors are thankful to Dr. Aleksandr Perevedentsev (ICMAB-CSIC) for his know-how regarding the fabrication of free-standing films, as well as for the preparation of the drop cast DH6T films. The authors are very thankful to Prof. Paul Smith (ETH Zürich) for fruitful discussions about polymer processing and Prof. Christian Müller for his useful comments on this work, and the suggestions regarding thermal diffusivity. The authors also thank Andrés Gómez for performing the nanoindentation experiments. I.M. and H.C. acknowledge King Abdullah University of Science and Technology Office of Sponsored Research (OSR) under awards no. OSR-2018-CARF/CCF-3079, and OSR-4106 CPF2019 as well as EC FP7 Project SC2 (610115).as the European Research Council (ERC) under grant agreement no. 648901. This work was financially supported by the European Commission through the Marie Skłodowska-Curie projects HORATES (GA-955837). J.M. is also grateful to the Spanish Ministry of Science and Innovation through project PGC2018-094620-A-I00. The authors also acknowledge the support from the Marie Skłodowska-Curie program (action no. 793726 – TELIOTES) and the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources. The authors, Arabia Saudita. King Abdullah University of Science and Technology; OSR-2018-CARF/CCF-3079, Arabia Saudita. King Abdullah University of Science and Technology; OSR-4106 CPF2019
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Microfluidic‐assisted blade coating of compositional libraries for combinatorial applications: the case of organic photovoltaics

  • Rodríguez Martínez, Xabier
  • Sevim, Semih
  • Xu, Xiaofeng
  • Franco, Carlos
  • Pamies-Puig, Paula
  • Córcoles Guija, Laura
  • Rodríguez Trujillo, Romén
  • Campo, Francisco Javier del
  • Rodríguez San Miguel, David
  • deMello, Andrew J.
  • Pané, Salvador
  • Amabilino, David B.
  • Inganäs, Olle
  • Puigmartí-Luis, Josep
  • Campoy Quiles, Mariano
Microfluidic technologies are highly adept at generating controllable compositional gradients in fluids, a feature that has accelerated the understanding of the importance of chemical gradients in biological processes. That said, the development of versatile methods to generate controllable compositional gradients in the solid‐state has been far more elusive. The ability to produce such gradients would provide access to extensive compositional libraries, thus enabling the high‐throughput exploration of the parametric landscape of functional solids and devices in a resource‐, time‐, and cost‐efficient manner. Herein, the synergic integration of microfluidic technologies is reported with blade coating to enable the controlled formation of compositional lateral gradients in solution. Subsequently, the transformation of liquid‐based compositional gradients into solid‐state thin films using this method is demonstrated. To demonstrate efficacy of the approach, microfluidic‐assisted blade coating is used to optimize blending ratios in organic solar cells. Importantly, this novel technology can be easily extended to other solution processable systems that require the formation of solid‐state compositional lateral gradients.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Imagen (Image)

Photoinduced p- to n-type Switching in Thermoelectric Polymer-Carbon Nanotube Composites

  • Dörling, Bernhard
  • El Basati, Ahmed
  • Gómez Rodríguez, Andrés
  • Garriga Bacardi, Miquel
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
Dörling, Bernhard et al., UV-induced switching from p- to n-type character is demonstrated during deposition of carbon-nanotube–conjugated polymer composites. This opens the possibility to photopattern n-type regions within an otherwise p-type film, which has a potential for complementary circuitry or, as shown here, thermoelectric generators made from a single solution., The authors would like to thank Dr. Isabel Alonso (ICMAB) and Prof. Salvador Ferrer (ALBA) for assisting during the synchrotron sessions as well as for useful discussions. The authors would also like to acknowledge financial support from the Ministerio de Economía y Competitividad of Spain through projects CSD2010–00044 (Consolider NANOTHERM) and MAT2012–37776 and the European Research Council (ERC) under grant agreement nos. 637624 and 648901. C.M. gratefully acknowledges fi nancial support from Formas, the Knut and Alice Wallenberg Foundation through a Wallenberg Academy Fellowship. The transmission X-ray microscopy experiments were performed at MISTRAL beamline at ALBA Synchrotron with the collaboration of ALBA staff. A.E.B. thanks the Egyptian Ministry of Higher Education for funding through the Short-term Scientifi c Mission Postdoctoral program. The authors thank Dr. Elena Bailo (Witec) for assistance with the Raman imaging experiments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring different doping mechanisms in thermoelectric polymer/ carbon nanotube composites

  • Dörling, Bernhard
  • Sandoval, Stefania
  • Kankla, Pacharapon
  • Fuertes, Amparo
  • Tobias, Gerard
  • Campoy Quiles, Mariano
This work compares various methods to prepare polymer/carbon nanotube (CNT) composites for thermoelectric applications, focusing on the different doping mechanisms. We first look at the general trends observed in the Seebeck coefficient and power factor for a large number of composites as a function of electrical conductivity. Then we discuss two methods of nitrogen doping the carbon nanotubes in these composites, namely either during synthesis, or afterwards by ammonolysis. Finally, we discuss doping of the carbon nanotubes through charge transfer from the polymer counterpart, including photo-induced switching of the majority carrier type. As a general remark, we note that processability is negatively influenced by some doping procedures. Best results were achieved for unfunctionalized single-walled carbon nanotubes with a high content of semiconducting CNT species., The authors would like to thank Prof. Michael L. Chabinyc, Prof. Christian Müller and Prof. Alejandro R. Goñi for useful discussions. We are grateful to John D. Craddock, Prof. Matthew C. Weisen- berger and Prof. John E. Anthony for providing the n-MWCNTs. The authors would also like to acknowledge financial support from the Ministerio de Economía y Competitividad of Spain through projects CSD2010–00044 (Consolider NANOTHERM), MAT2015- 70850-P and MAT2014-53500-R; and the European Research Council (ERC) under grant agreement no. 648901. S. Sandoval acknowledges a contract though PIE 201660E013 and P. Kankla the Development and Promotion of Science and Technology Talents Project (DPST). We are grateful to Thomas Swan Co. Ltd for supplying Elicarb1 SWCNTs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring the origin of high optical absorption in conjugated polymers

  • Vezie, Michelle S.
  • Dörling, Bernhard
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
  • Nelson, Jenny
Vezie, Michelle S. et al., The specific optical absorption of an organic semiconductor is critical to the performance of organic optoelectronic devices. For example, higher light-harvesting efficiency can lead to higher photocurrent in solar cells that are limited by sub-optimal electrical transport. Here, we compared over 40 conjugated polymers, and found that many different chemical structures share an apparent maximum in their extinction coefficients. However, a diketopyrrolopyrrole-thienothiophene copolymer shows remarkably high optical absorption at relatively low photon energies. By investigating its backbone structure and conformation with measurements and quantum chemical calculations, we find that the high optical absorption can be explained by the high persistence length of the polymer. Accordingly, we demonstrate high absorption in other polymers with high theoretical persistence length. Visible light harvesting may be enhanced in other conjugated polymers through judicious design of the structure., M.S.V. and S. F. are grateful to the Engineering and Physical Sciences Research Council (EPSRC) for a doctoral training award and a CDT studentship (EP/G037515/1) respectively. G.P. and S.C.H. acknowledge the University of Cyprus for funding through the internal grant "ORGANIC". B.D., A.G. and M.C.Q. acknowledge financial support from the Ministerio de Economía y Competitividad of Spain through projects CSD2010–00044 (Consolider NANOTHERM), SEV-2015_0496 and MAT2012–37776 and the European Research Council through project ERC CoG648901. I.M., R.S.A. and I.McC. acknowledge support from the European Commission FP7 Project ArtESun (604397). J.N. is grateful to the Royal Society for a Wolfson Merit Award, and acknowledges financial support from EPSRC grants EP/K030671/1, EP/K029843/1 and EP/J017361/1. The authors thank Dr. Isabel Alonso for performing supplementary ellipsometric measurements; we thank Prof. Thomas Kirchartz, Dr. Jarvist Moore Frost, Dr. Christian Müller and Dr. Isabel Alonso for helpful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Solution-Doped Polymer Semiconductor:Insulator Blend for Thermoelectrics

  • Kiefer, David
  • Liyang, Yu
  • Fransson, Erik
  • Gómez Rodríguez, Andrés
  • Primetzhofer, Daniel
  • Amassian, Aram
  • Campoy Quiles, Mariano
  • Müller, Christian
Poly(ethylene oxide) is demonstrated to be a suitable matrix polymer for the solution-doped conjugated polymer poly(3-hexylthiophene). The polarity of the insulator combined with carefully chosen processing conditions permits the fabrication of tens of micrometer-thick films that feature a fine distribution of the F4TCNQ dopant:semiconductor complex. Changes in electrical conductivity from 0.1 to 0.3 S cm−1 and Seebeck coefficient from 100 to 60 μV K−1 upon addition of the insulator correlate with an increase in doping efficiency from 20% to 40% for heavily doped ternary blends. An invariant bulk thermal conductivity of about 0.3 W m−1 K−1 gives rise to a thermoelectric Figure of merit ZT ∼ 10−4 that remains unaltered for an insulator content of more than 60 wt%. Free-standing, mechanically robust tapes illustrate the versatility of the developed dopant:semiconductor:insulator ternary blends., Financial support from the Swedish Research Council Formas, the Knut and Alice Wallenberg Foundation through a Wallenberg Academy Fellowship, the Foundation of Strategic Research (SSF) through a research infrastructure fellowship and the European Research Council (ERC) under grant agreements no. 637624 and 648901 is gratefully acknowledged. The authors thank Jason Ryan and Anders Mårtensson (Chalmers) for help with thermal conductivity and SEC measurements, Dr. Duc T. Duong (Stanford University) for advice on doping efficiency calculations and CHESS (supported by the NSF & NIH/NIGMS via NSF award DMR-1332208) for providing experimental time for GIWAXS measurements. M.C.Q. and A.G. acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and project CSD2010–00044 (Consolider NANOTHERM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Controlled Pinning of Conjugated Polymer Spherulites and Its Application in Detectors

  • Dörling, Bernhard
  • Sánchez Díaz, Antonio
  • Arteaga, Oriol
  • Veciana, Andrea
  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
The nucleation of single macroscopic spherulites at desired positions, as well as ordered arrays of multiple spherulites, is demonstrated by combining the use of crystallizable solvents with local control of solvent evaporation during solution deposition. Moreover, the temperature assisted localized frustration of molecular orientation is shown, enabling the fabrication of samples containing both isotropic areas and spherulites. These macroscopic circular polycrystalline structures are characterized using a range of polarized spectroscopic techniques that allow quantifying their large degree of chain orientation. In order to show the potential of these large conjugated polymer spherulites centered at desired locations, graded bilayer organic photovoltaic devices were fabricated to be used as polarimeters, solid state light polarization detectors with no moving parts, and position sensitive photodetectors., The authors would like to acknowledge financial support from the Ministerio de Economía y Competitividad of Spain through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015- 0496) and projects CSD2010-00044 (Consolider NANOTHERM) and MAT2015-70850-P; CSIC through project 201560I032; and the European Research Council (ERC) under grant agreement no. 648901. The authors would like to thank Mr. Javier Fernández Tejero and Ms. Laura Córcoles Guija for their contribution toward putting together the LBIC system and Andrés Gomez for the AFM measurements. The authors are grateful to Dr. Miquel Garriga (ICMAB) and Dr. Alejandro Goñi (ICMAB) for useful discussions. The residents of Sant Pol de Mar are sincerely acknowledged for inspiration regarding a sundial that works in the shade., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantifying local thickness and composition in thin films of organic photovoltaic blends by Raman scattering

  • Rodríguez Martínez, Xabier
  • Vezie, Michelle S.
  • Shi, Xingyuan
  • McCulloch, Iain
  • Nelson, Jenny
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
We report a methodology based on Raman spectroscopy that enables the non-invasive and fast quantitative determination of local thickness and composition in thin films (from few monolayers to hundreds of nm) of one or more components. We apply our methodology to blends of organic conjugated materials relevant in the field of organic photovoltaics. As a first step, we exploit the transfer-matrix formalism to describe the Raman process in thin films including reabsorption and interference effects of the incoming and scattered electric fields. This allows determining the effective solid-state Raman cross-section of each material by studying the dependence of the Raman intensity on film thickness. These effective cross sections are then used to estimate the local thickness and composition in a series of polymer:fullerene blends. We find that the model is accurate within ±10 nm in thickness and ±5 vol% in composition provided that (i) the film thickness is kept below the thickness corresponding to the first maximum of the calculated Raman intensity oscillation; (ii) the materials making up the blend show close enough effective Raman cross-sections; and (iii) the degree of order attained by the conjugated polymer in the blend is similar to that achieved when cast alone. Our methodology opens the possibility to make quantitative maps of composition and thickness over large areas (from microns to centimetres squared) with diffraction-limited resolution and in any multi-component system based thin film technology., We are indebted to Bernhard Dörling from ICMAB for the development of the accelerated blade coating platform. We also acknowledge Antonio Sánchez-Díaz from ICMAB for the evaporation of MoO3/Ag electrodes. The Spanish Ministerio de Economía y Competitividad (MINECO) is gratefully acknowledged for its support through Grant No. SEV-2015- 0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and through Grants No. MAT2012-37776, MAT2015-70850-P and No. CSD2010-00044 (Consolider NANOTHERM). We also acknowledge financial support from the European Research Council through project ERC CoG648901. M.S.V. acknowledges support from the Engineering and Physical Sciences Research Council (EPSRC) via a post-graduate research studentship. J.N. and X.S. thank the EPSRC for support via grants EP/M025020/1 and EP/K029843/1. M.S.V. and X.S. acknowledge additional supports from European COST Action MP1307 (StableNextSol) for inter-institutional research visits., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polymer:Fullerene Bimolecular Crystals for Near‐Infrared Spectroscopic Photodetectors

  • Zheng, Tang
  • Sánchez Díaz, Antonio
  • Campoy Quiles, Mariano
  • Vandewal, Koen
Zheng, Tang et al., Spectroscopic photodetection is a powerful tool in disciplines such as medical diagnosis, industrial process monitoring, or agriculture. However, its application in novel fields, including wearable and biointegrated electronics, is hampered by the use of bulky dispersive optics. Here, solution‐processed organic donor–acceptor blends are employed in a resonant optical cavity device architecture for wavelength‐tunable photodetection. While conventional photodetectors respond to above‐gap excitation, the cavity device exploits weak subgap absorption of intermolecular charge‐transfer states of the intercalating poly[2,5‐bis(3‐tetradecylthiophen‐2‐yl)thieno[3,2‐b]thiophene] (PBTTT):[6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) bimolecular crystal. This enables a highly wavelength selective, near‐infrared photoresponse with a spectral resolution down to 14 nm, as well as dark currents and detectivities comparable with commercial inorganic photodetectors. Based on this concept, a miniaturized spectrophotometer, comprising an array of narrowband cavity photodetectors, is fabricated by using a blade‐coated PBTTT:PCBM thin film with a thickness gradient. As an application example, a measurement of the transmittance spectrum of water by this device is demonstrated., The authors thank Prof. Olle Inganäs for discussions and use of his laboratory for carrying out parts of this work. This work was supported by the Alexander von Humboldt‐Foundation, through fellowships to Z.T. and Z.M., and the German Federal Ministry for Education and Research (BMBF) through the InnoProfile project “Organische p–i–n Bauelemente 2.2”. W.L. acknowledges financial support by the National Natural Science Foundation of China (Grant Nos. 51603209 and 21574138) and the Strategic Priority Research Program (XDB12030200) of the Chinese Academy of Sciences. A.M. acknowledges financial support by the Deutsche Forschungsgemeinschaft, project number LE747/53‐1. A.S.D. and M.C.Q. thank the European Research Council for financial support through grant CoG648901 and Ministerio de Economía y Competitividad of Spain through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV‐2015‐0496) and project MAT2015‐70850‐P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High‐Throughput Multiparametric Screening of Solution Processed Bulk Heterojunction Solar Cells

  • Sánchez Díaz, Antonio
  • Rodríguez Martínez, Xabier
  • Córcoles, Laura
  • Mora, Germán
  • Campoy Quiles, Mariano
One of the major bottlenecks in the development of organic photovoltaics is the time needed to evaluate each material system. This time ranges from weeks to months if different variables such as blend composition, thickness, annealing, and additives are to be explored. In this study, the use of lateral gradients is proposed in order to evaluate the photovoltaic potential of a material system up to 50 times faster. A platform that combines blade coating using controllable velocity profiles (thickness gradients) with multichannel dispensers (composition gradients) and controlled lateral annealing variations (nanostructure gradients) is introduced. These samples are then analyzed using photocurrent and Raman imaging in order to correlate one to one the device performance, thickness, composition, and annealing temperature. The strength of the developed technology is shown by optimizing three different systems, namely PCDTBT:PC70BM, PTB7‐Th:PC70BM, and PffBT4T‐2OD:PC70BM, obtaining efficiencies ≈5%, 8%, and 9.5%, respectively, using less than 10 mg of each polymer in the process., The authors are indebted to Dr. Bernhard Dörling for the development of the blade coating accelerating electronics, and Xavier Tejero and Prof. Alejandro Goñi for their help with setting up the LBIC system. The authors would also like to thank Dr. Juan Cabanillas (IMDEA) for useful discussions. The authors would like to acknowledge financial support from the Ministerio de Economía y Competitividad of Spain through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and project MAT2015‐70850‐P; and the European Research Council (ERC) under grant agreement No. 648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Combinatorial optimization of evaporated bilayer small molecule organic solar cells through orthogonal thickness gradients

  • Rodríguez Martínez, Xabier
  • Sánchez Díaz, Antonio
  • Guilin, Liu
  • Niño, Miguel Ángel
  • Cabanillas–Gonzalez, Juan
  • Campoy Quiles, Mariano
We report on a combinatorial optimization procedure applied to heterojunction small molecule organic solar cells made of evaporated copper phthalocyanine (CuPc) and 3,4,9,10-perylenetetracarboxylic bisbenzimidazole (PTCBI). Our strategy consists of depositing both light harvesting compounds as orthogonally arranged wedge-shaped layers to then determine the optimum thicknesses which yield the highest photoconversion efficiency. The device performance is locally assessed by means of light-beam induced current images. A quantitative model of co-locally measured Raman images allows determining the corresponding local thicknesses of the active layers. The spatial correlation of both datasets (i.e. local photocurrent density and active layer film thicknesses) enables the rapid optimization of the photovoltaic system studied employing a single functional device, reducing in approximately 20 times the use of resources and time., The Spanish Ministerio de Economía y Competitividad (MINECO) is gratefully acknowledged for its support through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program. J.C.-G. acknowledges funding from the MINECO through projects MAT2014-57652-C2-1-R and PCIN-2015-169-C02-01 and from the Madrid Regional Government through MAD2D project. M.A.N. acknowledges support from the MINECO through MAT2014-59315-R project. G.L. thanks the China Scholarship Council for financial support (201406790019). X.R.-M., A.S.-D. and M.C.-Q. acknowledge financial support from the European Research Council through project ERC CoG648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparing the potential of different strategies for colour tuning in thin film photovoltaic technologies

  • Pascual San José, Enrique
  • Sánchez Díaz, Antonio
  • Stella, Marco
  • Martínez Ferrero, Eugenia
  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
While the performance of some emerging solar cell technologies is rocketing, there are other important parameters that also need to be considered for industrialization, including aesthetics, payback time or long-term stability. More specifically, aesthetical features of the solar cells play a very important role in the path towards the integration of these semi-transparent technologies into the buildings and windows of the future. In this work, we have implemented a theoretical methodology to study in depth colour tuning in polymer-based organic photovoltaic cells that uses experimentally complex refractive indices. We compare quantitatively basic interference effects (through active layer thickness), binaries with different donors and different acceptors, and ternary systems where the third component is either active or a simple dye. For hybrid perovskite solar cells, we compare the colour tuning capability of blending and alloying. Additionally, we show that the same theoretical framework can be employed for the so-called inverse problem, i.e. determining the best solar cell parameters (specific materials, donor:acceptor ratio and photoactive film thickness) that can reproduce a desired set of chromaticity coordinates., This work was supported by the Spanish Ministerio de Economía y Competitividad (MINECO); under Grant MAT2015-70850-P (HIBRI2) and No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence; EURECAT, Centre Tecnològic de Catalunya through a research contract and European Research Council through project ERC CoG648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Defect tolerant perovskite solar cells from blade coated non-toxic solvents

  • Bi, Zhuoneng
  • Rodríguez Martínez, Xabier
  • Aranda, Clara
  • Pascual San José, Enrique
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
  • Xu, Xueqing
  • Guerrero, Antonio
Understanding crystallization of lead halide perovskites by industrially relevant techniques using non-toxic solvents is a topic that needs development. To this date, highest efficiency devices are prepared by deposition of the perovskite layer using non-scalable techniques, toxic solvents and/or require additional processing steps. In this work, we show that efficient one-step perovskite solar cells can be obtained by doctor blade. The perovskite film is formed under supersaturation regime from non-toxic solvents following spherulitic growth. This method results in highly crystalline perovskite films with preferential crystal orientation. Co-local photoluminescence and light-beam induced current experiments show that generated chemical defects are confined at the boundary of spherulites and these do not have a negative effect on the extracted photocurrent. Strikingly, spherulitic formation, rather than being detrimental, can lead to better photovoltaic performance in hybrid perovskite films. This is further confirmed in photovoltaic devices with record efficiencies of 18.0% for MAPbI3 (MA= Methyl ammonium) for doctor bladed processing using non-toxic solvents. Moreover, large area devices (1.53 cm2) fabricated using doctor blade show remarkable efficiencies (14.2%) reinforcing the viability of this solar technology towards industrialization., We greatly thank financial support by the Spanish Ministerio de Economía y Competitividad (MINECO) under projects MAT2016-76892-C3-1-R, MAT2015-70850-P (HIBRI2), Ramón y Cajal Fellowship number RYC-2014-16809 and through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence (ICMAB). X.X. and Z.B. would like to thank the Project on the Collaborative Innovation and Environmental Construction Platform of Guangdong Province (2014A050503051). We also thank the University Jaume I for financial support with the project (UJI-B2017-32) and its Serveis Centrals (SCIC) are acknowledged for the SEM measurement assistance. Finally, the authors at ICMAB would like to acknowledge financial support from the European Research Council (ERC) under grant agreement no. 648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pressure-Induced Locking of Methylammonium Cations versus Amorphization in Hybrid Lead Iodide Perovskites

  • Francisco López, Adrián
  • Charles, Bethan
  • Weber, Oliver J.
  • Alonso Carmona, M. Isabel
  • Garriga Bacardi, Miquel
  • Campoy Quiles, Mariano
  • Weller, Mark T.
  • Goñi, Alejandro R.
The structural phase behavior of high-quality single crystals of methylammonium lead iodide (CH3NH3PbI3 or MAPbI3) was revisited by combining Raman scattering and photoluminescence (PL) measurements under high hydrostatic pressure up to ca. 10 GPa. The single crystals were specially grown with the final thickness needed for pressure experiments, retaining their high quality due to a less invasive preparation procedure, which avoids sample thinning. Both PL and Raman spectra show simultaneous changes in their profiles that indicate the occurrence of three phase transitions subsequently at around 0.4, 2.7, and 3.3 GPa. At the second phase transition, the Raman spectra exhibit a pronounced reduction in the line width of the phonon modes of the inorganic cage, similar to the changes observed at the tetragonal-to-orthorhombic phase transition occurring at around 160 K but ambient pressure. This behavior is interpreted as evidence for the locking of the organic cations in the cage voids above 2.7 GPa due to the reduced volume and symmetry of the unit cell. At the third phase transition, reported here for the first time, the PL is greatly affected, whereas the Raman spectrum experiences only subtle changes related to a splitting of some of the peaks. This behavior may indicate a change mostly in the electronic structure with little effect on the crystal structure. Strikingly, the sharp Raman features observed at high pressures do not support amorphization of MAPbI3 with onset at 3 GPa, as claimed by most of the high-pressure (X-ray) literature. We interpret this apparent discrepancy in terms of the degree of disorder introduced at different length scales in the perovskite lattice by the pressure-induced freeze-out of the methylammonium cation motion., The Spanish Ministerio de Economí a, Industria y Competitividad, is gratefully acknowledged for its support through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and through Grants MAT2015-70850-P (HIBRI2) and CSD2010-00044 (Consolider NANOTHERM). A.F.-L. acknowledges a FPI fellowship from the Spanish Ministerio co-financed by the European Social Fund. B.C. and O.J.W. thank the EPSRC for Ph.D. studentship funding via the CSCT CDT (EP/ G03768X/1, EP/L016354/1). Financial support is also acknowledged from the European Research Council through project ERC CoG648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Band gap tuning of solution processed ferroelectric perovskite BiFe1-xCoxO3 thin films

  • Machado, Pamela
  • Scigaj, Mateusz
  • Gázquez, Jaume
  • Rueda, Estel
  • Sánchez Díaz, Antonio
  • Fina, Ignasi
  • Gibert Roca, Martí
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Campoy Quiles, Mariano
  • Coll, Mariona
Ferroelectric perovskite oxides are emerging as a promising photoactive layer for photovoltaic applications due to their very high stability and their alternative ferroelectricity-related mechanism for solar energy conversion that could lead to extraordi-narily high efficiencies. One of the biggest challenges so far is to reduce their band gap towards the visible while simultane-ously retaining ferroelectricity. To address these two issues, herein it is performed an elemental composition engineering of BiFeO3 by substituting Fe by Co cations, as means to tune the characteristics of the transition metal-oxygen bond. We demonstrate by solution processing the formation of epitaxial, pure phase and stable BiFe1-xCoxO3 thin films for x=0.3 and film thickness up to 100 nm. Importantly, the band gap can be tuned from 2.7 eV to 2.3 eV upon cobalt substitution while simultaneously enhancing ferroelectricity. As a proof of concept, non-optimized vertical devices have been fabricated and, reassuringly, the electrical photoresponse in the visible of the Co-substituted phase is improved with respect to the unsubsti-tuted oxide., We would like to acknowledge Prof. Josep Fontcuberta for fruitful discussions and comments on this study and for providing access to his experimental facilities. This research was supported by the Spanish MINECO (“Severo Ochoa” Programme for Centres of Excellence in R&D SEV-2015-0496 and FIPNANOSOLE- 2016, MAT2017-83169-R, MAT2014-51778-C2- 1-R, MAT2015-70850-P, MAT2017-85232-R (AEI/FEDER, EU)), the Generalitat de Catalunya (2017-SGR-1519, 2017 SGR- 1377), the European Research Council-ERC (FOREMAT under grant agreement no. 648901) and “L’Oreal UNESCO For Women in Science”. M.C., J.G. and I.F. acknowledge RyC contracts (2013-12448, 2012-11709 and RYC-2017-22531). I.F. is grateful to MINECO for MAT2015-73839-JIN project. The HRTEM microscopy work was conducted at the Center for Nanophase Materials Sciences at Oak Ridge National Laboratory, which is a DOE Office of Science User Facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Equal Footing of Thermal Expansion and Electron–Phonon Interaction in the Temperature Dependence of Lead Halide Perovskite Band Gaps

  • Francisco López, Adrián
  • Charles, Bethan
  • Weber, Oliver J.
  • Alonso Carmona, M. Isabel
  • Garriga Bacardi, Miquel
  • Campoy Quiles, Mariano
  • Weller, Mark T.
  • Goñi, Alejandro R.
Lead halide perovskites, which are causing a paradigm shift in photovoltaics, exhibit an atypical temperature dependence of the fundamental gap: it decreases in energy with decreasing temperature. Reports ascribe such a behavior to a strong electron−phonon renormalization of the gap, neglecting contributions from thermal expansion. However, high-pressure experiments performed on the archetypal perovskite MAPbI3 (MA stands for methylammonium) yield a negative pressure coefficient for the gap of the tetragonal room-temperature phase, which speaks against the assumption of negligible thermal expansion effects. Here we show that for MAPbI3 the temperature-induced gap renormalization due to electron−phonon interaction can only account for about 40% of the total energy shift, thus implying thermal expansion to be more if not as important as electron− phonon coupling. Furthermore, this result possesses general validity, holding also for the tetragonal or cubic phase, stable at ambient conditions, of most halide perovskite counterparts., We gratefully acknowledge fruitful discussions with H. Míguez, M. Calvo and A. Rubino from the Institute of Materials Science of Seville, Spain. The Spanish Ministerio de Ciencia, Innovación y Universidades is gratefully acknowledged for its support through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and through Grant MAT2015-70850-P (HIBRI2). AFL acknowledges a FPI fellowship (BES-2016-076913) from the Spanish Ministerio co-financed by the European Social Fund and the PhD programme in Materials Science from Universitat Autònoma de Barcelona in which he is enrolled. BC and OJW thank the EPSRC for PhD studentship funding via the CSCT CDT (EP/G03768X/1, EP/L016354/1). Financial support from is also acknowledged from the European Research Council through project ERC CoG648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Will organic thermoelectrics get hot?

  • Campoy Quiles, Mariano
One contribution of 13 to a discussion meeting issue ‘Energy materials for a low carbon future’., The generally low energy density from most heat sources—the Sun, Earth as well as most human activities—implies that solid-state thermoelectric devices are the most versatile heat harvesters since, unlike steam engines, they can be used on a small scale and at small temperature differences. In this opinion piece, we first discuss the materials requirements for the widespread use of thermoelectrics. We argue that carbon-based materials, such as conducting polymers and carbon nanotubes, are particularly suited for large area and low-temperature operation applications, as they are abundant, low-toxicity and easy to process. We combine experimentally observed macro-trends and basic thermoelectric relations to evaluate the major performance limitations of this technology thus far and propose a number of avenues to take the thermoelectric efficiency of organic materials beyond the state of the art. First, we emphasize how charge carrier mobility, rather than charge density, is currently limiting performance, and discuss how to improve mobility by exploiting anisotropy, high persistence length materials and composites with long and well-dispersed carbon nanotubes. We also show that reducing thermal conductivity could double efficiency while reducing doping requirements. Finally, we discuss several ways in which composites could further boost performance, introducing the concept of interface engineering to produce phonon stack-electron tunnel composites.This article is part of a discussion meeting issue ‘Energy materials for a low carbon future'., Project SEV-2015-0496 from Spanish Ministry of Economy, Industry and Competitiveness through the ‘Severo Ochoa' Programme for Centers of Excellence in R&D. European Research Council (ERC) under grant agreement no. 648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ferroelectricity-free lead halide perovskites

  • Gómez Rodríguez, Andrés
  • Wang, Qiong
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
  • Abate, Antonio
Direct piezoelectric force microscopy (DPFM) is employed to examine whether or not lead halide perovskites exhibit ferroelectricity. Compared to conventional piezoelectric force microscopy, DPFM is a novel technique capable of measuring piezoelectricity directly. This fact is fundamental to be able to examine the existence of ferroelectricity in lead halide perovskites, an issue that has been under debate for several years. DPFM is used to detect the current signals, i.e. changes in the charge distribution under the influence of the scan direction and applied force of the atomic force microscope (AFM) tip in contact mode. For comparison, (i) we use DPFM on lead halide perovskites and well-known ferroelectric materials (i.e. periodically poled lithium niobate and lead zirconate titanate); and (ii) we conduct parallel experiments on MAPbI3 films of different grain sizes, film thicknesses, substrates, and textures using DPFM as well as piezoelectric force microscopy (PFM) and electrostatic force microscopy (EFM). In contrast to previous work that claimed there were ferroelectric domains in MAPbI3 perovskite films, our work shows that the studied perovskite films Cs0.05(FA0.83MA0.17)0.95Pb(I0.83Br0.17)3 and MAPbI3 are ferroelectricity-free. The observed current profiles of lead halide perovskites possibly originate from ion migration that happens under an applied electrical bias and in strained samples under mechanical stress. This work provides a deeper understanding of the fundamental physical properties of the organic–inorganic lead halide perovskites and solves a longstanding dispute about their non-ferroelectric character: an issue of high relevance for optoelectronic and photovoltaic applications., The authors gratefully acknowledge the Spanish Ministerio de Economía, Industria y Competitividad for its support through Grant No. MAT2015-70850-P, PGC2018-095411-B-I00 and SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and through Grant MAT2015-70850-P (HIBRI2). We thank the financial support from the European Research Council through project ERC CoG648901. We thank the Program under grant agreement No. 654360 within the framework of NFFA-Europe that benefits us with access to ICMAB-CSIC in Barcelona. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). A. A. thanks the National Natural Science Foundation of China under the grant number 21750110442., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assembly-Induced Bright-Light Emission from Solution-Processed Platinum(II) Inorganic Polymers

  • Perevedentsev, Aleksandr
  • Bargardi, Fabio L.
  • Sanchez Ferrer, Antoni
  • Cheetham, Nathan J.
  • Sousaraei, Ahmad
  • Busato, Stephan
  • Gierschner, Johannes
  • Milian Medina, Begoña
  • Mezzenga, Raffaele
  • Wannemacher, Reinhold
  • Cabanillas–Gonzalez, Juan
  • Campoy Quiles, Mariano
  • Caseri, Walter R.
Synthesis, processing, and characterization are reported for a series of tetracyanoplatinate Magnus' salt (TCN-MS) derivatives-soluble derivatives of the generally intractable Magnus' green salt-that feature the general structure [Pt(NH2R)(4)] [Pt(CN)(4)] where R is a branched alkyl group or a w-phenylalkyl group. In solutions, these coordination compounds generally dissolve on the level of individual ion pairs as shown by X-ray diffraction analysis. To enable the formation of quasi-one-dimensional linear stacks of Pt(II) atoms in thin films, the matrix-assisted assembly is employed, whereby the compounds are codissolved with poly(ethylene oxide) (PEO), followed by film casting, thermally activated assembly, and eventual removal of PEO. Remarkably, assembled TCN-MS inorganic polymers exhibit bright blue-green photoluminescence. A detailed investigation of the assembly process and simultaneously modified solid-state optical properties is performed using a range of microscopy, optical and vibrational spectroscopy, and thermal analysis techniques. Given their unusual combination of optical properties, namely, transparency in the visible region, high photoluminescence quantum efficiencies (up to 13% in first-demonstration samples), and large Stokes shifts (up to 1 eV), TCN-MS derivatives are proposed as a promising class of light-emitting materials for emerging applications in molecular optoelectronics, the potential and challenges of which are discussed., The work in Barcelona was financially supported by the Ministerio de Economía y Competitividad of Spain through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496) and project MAT2015-70850-P and the European Research Council (ERC) under grant agreement no. 648901. The work in Madrid and Valencia was supported by the Spanish Ministerio de Economía y Competitividad (MINECO-FEDER project CTQ2017-87054); the work in Madrid was further supported by the Severo Ochoa Programme for Centers of Excellence in R&D program of the MINECO (SEV-2016-0686) and by the Campus of International Excellence (CEI) UAM + CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Farming thermoelectric paper

  • Abol Fotouh, Deyaa
  • Dörling, Bernhard
  • Zapata Arteaga, Osnat
  • Rodríguez Martínez, Xabier
  • Gómez Rodríguez, Andrés
  • Reparaz, J. S.
  • Laromaine, Anna
  • Roig Serra, Anna
  • Campoy Quiles, Mariano
Waste heat to electricity conversion using thermoelectric generators is emerging as a key technology in the forthcoming energy scenario. Carbon-based composites could unleash the as yet untapped potential of thermoelectricity by combining the low cost, easy processability, and low thermal conductivity of biopolymers with the mechanical strength and good electrical properties of carbon nanotubes (CNTs). Here we use bacteria in environmentally friendly aqueous media to grow large area bacterial nanocellulose (BC) films with an embedded highly dispersed CNT network. The thick films (≈10 μm) exhibit tuneable transparency and colour, as well as low thermal and high electrical conductivity. Moreover, they are fully bendable, can conformally wrap around heat sources and are stable above 500 K, which expands the range of potential uses compared to typical conducting polymers and composites. The high porosity of the material facilitates effective n-type doping, enabling the fabrication of a thermoelectric module from farmed thermoelectric paper. Because of vertical phase separation of the CNTs in the BC composite, the grown films at the same time serve as both the active layer and separating layer, insulating each thermoelectric leg from the adjacent ones. Last but not least, the BC can be enzymatically decomposed, completely reclaiming the embedded CNTs., The authors would like to thank Prof. A. Goñi for useful discussions, Dr A. Mihi for help with the FTIR equipment and integrating sphere, Mr J. Jurado for assistance with the IR camera, and Mrs S. Roig-Sánchez for the mechanical characterization. We also greatly acknowledge financial support from the Spanish Ministry of Economy, Industry and Competitiveness through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496) and MAT2015-70850-P and MAT2015-64442-R projects; Generalitat de Catalunya (2017SGR765 and 2017SGR488 projects); CSIC through project 201560I032; and the European Research Council (ERC) under grant agreement no. 648901. DAF is grateful to the Egyptian Ministry of Higher Education and scientific research for his PhD grant. We also kindly thank Zeon Nano Technology for providing the Supergrowth CNTs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Blade coated P3HT:non-fullerene acceptor solar cells: a high-throughput parameter study with a focus on up-scalability

  • Pascual San José, Enrique
  • Rodríguez Martínez, Xabier
  • Adel Abdelaleim, Rana
  • Stella, Marco
  • Martínez Ferrero, Eugenia
  • Campoy Quiles, Mariano
Combining non-fullerene acceptors (NFAs) with novel low band gap polymers has led to very promising performances. However, research on donors that can reduce the performance–cost gap, such as poly(3-hexylthiophene) (P3HT), can play an instrumental role in the upscaling of this technology. In this paper, we have analysed the influence of several processing parameters on the performance of solar cells based on P3HT:NFA binaries deposited by blade coating. The investigated NFAs include molecules with variations in the side chains and end-capping groups. More precisely, we have looked at devices based on P3HT blended with five NFAs, namely ITIC, ITIC-M, O-IDTBR, EH-IDTBR, and O-IDFBR, and employed PC60BM and ICBA as reference acceptors. More than one thousand doctor-bladed P3HT:NFA samples were manufactured using high throughput techniques using gradients of both thickness and annealing temperature. The combined data for all samples were employed to perform a parameter sensitivity study in order to identify the most influential parameters for P3HT based devices. For all material combinations, we have found that blade coated solar cells fabricated from chlorobenzene/dichlorobenzene mixtures outperform those based on chlorobenzene. For the most promising binary (i.e. P3HT:O-IDTBR), we have investigated in more depth the effects resulting from the choice of solvent, as well as casting temperature and post-deposition thermal annealing. Devices with power conversion efficiencies greater than 5% were obtained regardless of the casting temperature and for a relatively wide thickness range (80–250 nm). Finally, we have shown that encapsulated devices exhibit a stable performance for more than 3000 h and that degradation progresses faster in thicker devices. O-IDTBR has been identified to play a major role in the device degradation., This work was supported by the Spanish Ministerio de Economía y Competitividad (MINECO) under Grants MAT2015-70850-P, PGC2018-095411-B-I00 and SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence, the EURECAT Technology Centre, European Research Council through project ERC CoG648901 and H2020 Marie Curie actions through the SEPOMO project (Grant number 722651). We are also very thankful to Mr Fernando Gallegos for manufacturing the metallic holder, Mr Martí Gibert for the useful multiplexer/switcher design, Dr Bernhard Dörling for designing the doctor blade controller, Mr Adrián Francisco for helping with Raman fittings and Dr Marta Riba, Mrs Marta Gerbolés, Mrs Anna Crespí and Mr Andrés Gómez for helping with contact angle, XRD and AFM measurements, respectively. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solar Harvesting: a Unique Opportunity for Organic Thermoelectrics?

  • Jurado, José Piers
  • Dörling, Bernhard
  • Zapata Arteaga, Osnat
  • Roig Serra, Anna
  • Mihi, Agustín
  • Campoy Quiles, Mariano
Thermoelectrics have emerged as a strategy for solar‐to‐electricity conversion, as they can complement photovoltaic devices as IR harvesters or operate as stand‐alone systems often under strong light and heat concentration. Inspired by the recent success of inorganic‐based solar thermoelectric generators (STEGs), in this manuscript, the potential of benchmark organic thermoelectric materials for solar harvesting is evaluated. It is shown that the inherent properties of organic semiconductors allow the possibility of fabricating organic STEGs (SOTEGs) of extraordinary simplicity. The broadband light absorption exhibited by most organic thermoelectrics combined with their low thermal conductivities results in a significant temperature rise upon illumination as seen by IR thermography. Under 2 sun illumination, a temperature difference of 50 K establishes between the illuminated and the non‐illuminated sides of a poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) film, and ≈40 K for a carbon nanotube/cellulose composite. Moreover, when using light as a heat source, the Seebeck coefficient remains unaffected, while a small photoconductivity effect is observed in PEDOT:PSS and carbon nanotubes. Then, the effect of several geometrical factors on the power output of a solar organic thermoelectric generator is investigated, enabling us to propose simple SOTEG geometries that capitalize on the planar geometry typical of solution‐processable materials. Finally, a proof‐of‐concept SOTEG is demonstrated, generating 180 nW under 2 suns., The authors acknowledge financial support from the Spanish Ministry of Economy, Industry, and Competitiveness through the ‘‘Severo Ochoa'' Program for Centers of Excellence in R&D (SEV‐2015‐0496), MAT2015‐70850‐P and PGC2018‐095411‐B‐I00 projects; from the Generalitat de Catalunya through grants 2017SGR488 and AGAUR 2018 PROD 00191; from CSIC through project 201560I032; and from the European Research Council (ERC) under grant agreement no. 648901. This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska‐Curie grant agreement No. 713673. J.P.J. has received financial support through the “la Caixa” INPhINIT Fellowship Grant for Doctoral studies at Spanish Research Centers of Excellence (Grant code: LCF/BQ/IN17/11620035), “la Caixa” Banking Foundation (ID100010434), Barcelona, Spain. O.Z.A. acknowledges CONACYT‐SENER for his Ph.D. scholarship (No 472571). The authors thank Dr. Deyaa Abol‐Fotouh (ICMAB) for the CNT:cellulose sample preparation. The authors thank Dr. Anna Laromaine (ICMAB), Dr. Sebastian Reparaz (ICMAB), and Dr. Carlos Prieto (ICMM) for fruitful discussions. The authors also thank Mr. Martí Gibert Roca for his help with the 3D printer and Dr. Alexander Stangl for his help with the nanovoltmeter., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient Exploration of the Composition Space in Ternary Organic Solar Cells by Combining High‐Throughput Material Libraries and Hyperspectral Imaging

  • Harillo Baños, Albert
  • Rodríguez Martínez, Xabier
  • Campoy Quiles, Mariano
Dataset availble in http://digital.csic.es/handle/10261/194041, Organic solar cells based on ternary active layers can lead to higher power conversion efficiencies than corresponding binaries, and improved stability. The parameter space for optimization of multicomponent systems is considerably more complex than that of binaries, due to both, a larger number of parameters (e.g., two relative compositions rather than one) and intricate morphology–property correlations. Most experimental reports to date reasonably limit themselves to a relatively narrow subset of compositions (e.g., the 1:1 donor/s:acceptor/s trajectory). This work advances a methodology that allows exploration of a large fraction of the ternary phase space employing only a few (<10) samples. Each sample is produced by a designed sequential deposition of the constituent inks, and results in compositions gradients with ≈5000 points/sample that cover about 15%–25% of the phase space. These effective ternary libraries are then colocally imaged by a combination of photovoltaic techniques (laser and white light photocurrent maps) and spectroscopic techniques (Raman, photoluminescence, absorption). The generality of the methodology is demonstrated by investigating three ternary systems, namely PBDB‐T:ITIC:PC70BM, PTB7‐Th:ITIC:PC70BM, and P3HT:O‐IDFBR:O‐IDTBR. Complex performance‐structure landscapes through the ternary diagram as well as the emergence of several performance maxima are discovered., A.H.B. and X.R.M. acknowledge the departments of Physics, Chemistry and Geology of the Autonomous University of Barcelona (UAB) as coordinators of the PhD programme in Materials Science. The authors would like to acknowledge financial support from the Spanish Ministry of Economy, Industry and Competitiveness through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV‐2015‐0496) and project reference PGC2018‐095411‐B‐I00 as well as the European Research Council (ERC) under Grant Agreement No. 648901 and Agència de Gestió d'Ajuts Universitaris i de Recerca (Grant Numbers 2017‐SGR‐00488). The authors also thank Dr. Bernhard Dörling (ICMAB) for the customization of the blade coating setup, and Enrique Pascual, Martí Gibert, and Dr. Miquel Garriga (ICMAB) for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Coercivity modulation in Fe–Cu pseudo-ordered porous thin films controlled by an applied voltage: A sustainable, energy-efficient approach to magnetoelectrically driven materials

  • Dislaki, Evangelia
  • Robbennolt, Shauna
  • Campoy Quiles, Mariano
  • Nogués, Josep
  • Pellicer, Eva
  • Sort, Jordi
Fe–Cu films with pseudo‐ordered, hierarchical porosity are prepared by a simple, two‐step procedure that combines colloidal templating (using sub‐micrometer‐sized polystyrene spheres) with electrodeposition. The porosity degree of these films, estimated by ellipsometry measurements, is as high as 65%. The resulting magnetic properties can be controlled at room temperature using an applied electric field generated through an electric double layer in an anhydrous electrolyte. This material shows a remarkable 25% voltage‐driven coercivity reduction upon application of negative voltages, with excellent reversibility when a positive voltage is applied, and a short recovery time. The pronounced reduction of coercivity is mainly ascribed to electrostatic charge accumulation at the surface of the porous alloy, which occurs over a large fraction of the electrodeposited material due to its high surface‐area‐to‐volume ratio. The emergence of a hierarchical porosity is found to be crucial because it promotes the infiltration of the electrolyte into the structure of the film. The observed effects make this material a promising candidate to boost energy efficiency in magnetoelectrically actuated devices., This work was supported by the SELECTA (No. 642642) H2020‐MSCA‐ITN‐2014 project. Partial financial support by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) (Project Nos. MAT2017‐86357‐C3‐1‐R, MAT2015‐70850‐P and associated FEDER), the Generalitat de Catalunya (2017‐SGR‐292), and the European Research Council (SPIN‐PORICS and FOREMAT, with Agreement Nos. 648454 and 648901, respectively) is acknowledged. E.P. is grateful to MINECO for the “Ramon y Cajal” contract (RYC‐2012‐10839). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa programme of MINECO, grant no. SEV‐2013‐0295., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Closing the Stability–Performance Gap in Organic Thermoelectrics by Adjusting the Partial to Integer Charge Transfer Ratio

  • Zapata Arteaga, Osnat
  • Dörling, Bernhard
  • Perevedentsev, Aleksandr
  • Martín, Jaime
  • Reparaz, J. S.
  • Campoy Quiles, Mariano
Two doping mechanisms are known for the well-studied materials poly(3-hexylthiophene) (P3HT) and poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT), namely, integer charge transfer (ICT) and charge transfer complex (CTC) formation. Yet, there is poor understanding of the effect of doping mechanism on thermal stability and the thermoelectric properties. In this work, we present a method to finely adjust the ICT to CTC ratio. Using it, we characterize electrical and thermal conductivities as well as the Seebeck coefficient and the long-term stability under thermal stress of P3HT and PBTTT of different ICT/CTC ratios. We establish that doping through the CTC results in more stable, yet lower conductivity samples compared to ICT doped films. Importantly, moderate CTC fractions of ∼33% are found to improve the long-term stability without a significant sacrifice in electrical conductivity. Through visible and IR spectroscopies, polarized optical microscopy, and grazing-incidence wide-angle X-ray scattering, we find that the CTC dopant molecule access sites within the polymer network are less prone to dedoping upon thermal exposure., We thank Dr. Martijn Kemerink for fruitful discussions at the early stages of this project. The authors acknowledge financial support from the Spanish Ministry of Economy, Industry, and Competitiveness through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496), MAT2015-70850-P, PGC2018-095411-B-I00, and No. MAT2017-90024-P (TANGENTS)-EI/FEDER, UE projects; from the Generalitat de Catalunya through grants 2017SGR488 and AGAUR 2018 PROD 00191; from CSIC through project 201560I032; and from the European Research Council (ERC) under grant agreement no. 648901. O.Z.-A. acknowledges CONACYT-SENER for his Ph.D. scholarship (No. 472571). J.M. furthermore thanks MINECO for the Ramón y Cajal contract and the PGC2018-094620-A-I00 grant. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards photovoltaic windows: scalable fabrication of semitransparent modules based on non-fullerene acceptors via laser-patterning

  • Pascual San José, Enrique
  • Sadoughi, Golnaz
  • Lucera, Luca
  • Stella, Marco
  • Martínez Ferrero, Eugenia
  • Morse, Graham Edward
  • Campoy Quiles, Mariano
  • Burgués Ceballos, Ignasi
Semitransparent organic photovoltaics (OPV) possess unique properties that make them highly appealing for their integration into semitransparent architectonic elements such as windows or glazings. In order to provide sufficient transparency, non-opaque electrodes and thin photoactive layers are typically used, thus limiting the light-harvesting capacity. This can be partially overcome by using materials that absorb light mostly in the infrared region. On the other hand, the use of scalable techniques for the fabrication of semitransparent devices is often disregarded. In this work, we combine the blue, low-bandgap polymer PBTZT-stat-BDTT-8 with the near-infrared absorbing non-fullerene acceptor 4TICO, adapting the module fabrication to low-cost manufacturing processes that are compatible with large-scale production. Fully solution-processed semitransparent solar cells over 4.7% performance are prepared from non-chlorinated formulations, in air and using scalable techniques such as blade coating. Our prototypes of semitransparent laser-patterned OPV modules exceed 30% of transparency (measured as human perception transmittance, HPT) and yield efficiencies in the range of 4%, geometrical fill factors surpassing 90% and an active area above 1 cm2. We verify the quality of cell-to-cell interconnection and optimise the geometry of the modules with the help of local optoelectronic imaging techniques. This work highlights the relevance of non-fullerene acceptors with strong absorption in the near-infrared, as they can meet industrial and technical requirements for the upscaling and integration of high-performance semitransparent OPV modules with low production costs., This work was supported by the Spanish Ministerio de Economía y Competitividad (MINECO) under Grant PGC2018-095411-B-I00 and No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence and by EURECAT Technological Centre. We acknowledge financial support from European Research Council through project ERC CoG 648901 and H2020 Marie Curie actions through the SEPOMO project (Grant number 722651). E.P.-S.-J. wants to thank Mr Pierluigi Mondelli for his help in the laser patterning experimental setup and Mrs Léa Silvestre for her help manufacturing devices. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Investigating Thermoelectric Stability under Encapsulation Using PEI-Doped CNT Films as a Model System

  • Abdallah, Fatma
  • Ciammaruchi, Laura
  • Jiménez Arguijo, Álex
  • Duraia, El-Shazly M.
  • Ragab, Hossam. S.
  • Dörling, Bernhard
  • Campoy Quiles, Mariano
The stability of organic semiconductors is an important topic, which in the case of organic thermoelectrics (OTEs), has not yet got the attention it deserves. This work presents a simple method which allows to characterize the stability of OTEs, using patterned ITO substrates to electrically contact encapsulated samples. The method is applied to n‐doped carbon nanotube films, a well‐suited reference system due to their sensitivity to changes in doping level, and used to compare the effectiveness of different encapsulation methods. In the observed films, oxygen adsorption leads to a gradual p‐doping. Among the investigated barrier materials, glass performs best. Flexible alternatives like transferred films of barrier polymers also show promise, while barrier films deposited by dropcast performed worse, likely due to their inhomogeneity. Finally, Raman imaging is shown to be a useful technique to investigate degradation in OTEs., The authors would like to thank Aleksandr Perevedentsev for advice with the EVOH film transfer. The authors acknowledge financial support from the Spanish Ministry of Economy, Industry, and Competitiveness through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV‐2015‐0496), MAT2015‐70850‐P, and from the Generalitat de Catalunya through AGAUR 2018 PROD 00191; from CSIC through project 201560I032; and from the European Research Council (ERC) under grant agreement no. 648901. F.A., E.‐S.M.D., and H.S.R would like to acknowledge the Ministry of Higher Education (MOHE) of Egypt, the National Bank of Egypt and Banque Misr for funding the fellowship to conduct this study., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Controlling the Thermoelectric Properties of Organometallic Coordination Polymers via Ligand Design

  • Liu, Zilu
  • Liu, Tianjun
  • Savory, Christopher N.
  • Jurado, José Piers
  • Reparaz, J. S.
  • Li, Jianwei
  • Pan, Long
  • Faul, Charl F. J.
  • Parkin, Ivan P.
  • Sankar, Gopinathan
  • Matsuishi, Satoru
  • Campoy Quiles, Mariano
  • Scanlon, David O.
  • Zwijnenburg, Martijn A.
  • Fenwick, Oliver
  • Schroeder, Bob C.
Organometallic coordination polymers (OMCPs) are a promising class of thermoelectric materials with high electrical conductivities and thermal resistivities. The design criteria for these materials, however, remain elusive and so far material modifications have been focused primarily on the nature of the metal cation to tune the thermoelectric properties. Herein, an alternative approach is described by synthesizing new organic ligands for OMCPs, allowing modulation of the thermoelectric properties of the novel OMCP materials over several orders of magnitude, as well as controlling the polarity of the Seebeck coefficient. Extensive material purification combined with spectroscopy experiments and calculations furthermore reveal the charge‐neutral character of the polymer backbones. In the absence of counter‐cations, the OMCP backbones are composed of air‐stable, ligand‐centered radicals. The findings open up new synthetic possibilities for OMCPs by removing structural constraints and putting significant emphasis on the molecular structure of the organic ligands in OMCP materials to tune their thermoelectric properties., The authors gratefully acknowledge Dr. Mark Baxendale for the use of the MMR Seebeck instrument, as well as Dr. Shibo Xi for the support and assistance provided during the XANES measurements. Z.L., T.L. and J.L. acknowledge the support from Chinese Scholarship Council (CSC). B.C.S. acknowledges funding by the Leverhulme Trust (Grant RF‐2017‐655\4) and the EPSRC (EP/P007767/1). M.A.Z. acknowledges the UK Engineering and Physical Sciences Research Council (EPSRC) for funding (Grant EP/N004884/1, Integration of Computation and Experiment for Accelerated Materials Discovery). B.C.S. and M.A.Z. acknowledge the EPSRC (Grant EP/R034540/1, Defect Functionalized Sustainable Energy Materials: From Design to Devices Application). O.F. acknowledges the support of The Royal Society (UF140372). The authors at ICMAB would like to acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through the “‘Severo Ochoa”' Program for Centers of Excellence in R&D (SEV‐2015‐0496), PGC2018‐095411‐B‐I00, and MAT2017‐ 90024‐P, and from the European Research Council (ERC) under grant agreement no. 648901. J. P. J. has received financial support through the “la Caixa” INPhINIT Fellowship Grant (Grant code: LCF/BQ/IN17/11620035). L.P. acknowledges a Newton Fellowship from the Royal Society for funding (grant reference NF170361). The use of the UCL Legion, Myriad, and Grace High Performance Computing Facilities (Legion@UCL, Myriad@UCL and Grace@UCL) is acknowledged in the production of this work. Computational work was also performed on the ARCHER UK National Supercomputing Service, via our membership of the UK's HEC Materials Chemistry Consortium, funded by EPSRC (EP/L000202 and EP/R029431), and the UK Materials and Molecular Modelling Hub, which is partially funded by EPSRC (EP/P020194/1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Near infrared organic photodetectors based on enhanced charge transfer state absorption by photonic architectures

  • Gibert Roca, Martí
  • Molet, Pau
  • Mihi, Agustín
  • Campoy Quiles, Mariano
Near infrared photodetectors are a widespread and fundamental technology in many disciplines, from astronomy and telecommunications to medical sciences. Current technologies are now striving to include new aspects in this technology such as wearability, flexibility and tunability. Organic photodetectors easily offer many of those advantages but their relatively high bandgaps hinder NIR operation. In this work, we demonstrate solution processed organic photodetectors with improved NIR response thanks to a nanostructured active layer in the shape of a photonic crystal. The latter strongly increases the charge transfer state absorption, which is normally weak but broadband, increasing the optical path of light and resulting in remarkable photoresponse significantly below the band gap of the blend. We show responsivities up to 50 mA W−1 at 900 nm for PBTTT:PC71BM based photodetectors. On top of that, by varying the lattice parameter of the photonic crystal structure, the spectral response of the photodetectors can be tuned beyond 1000 nm. Furthermore, our photonic structure can be easily implemented in the device in a single nanoimprinting step, with minimal disruption on the fabrication process, which makes this approach very promising for upscaling., We greatly acknowledge financial support from the Ministerio de Ciencia, Innovación y Universidades MICINN with projects PGC2018-095411-B-I00, MAT2016-79053-P and MAT2015-70850-P and the “Severo Ochoa” excellence program SEV-2015-0496; Generalitat de Catalunya program AGAUR 2017-SGR-00488; and the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grants no. CoG648901 and StG637116). P. M. acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF. M. G. R. acknowledges financial support from an FPU grant (no. 16/02631) (2017) of the MICINN (Spain). M. G. R. and P. M. B. acknowledge the departments of Physics, Chemistry and Geology of the Autonomous University of Barcelona (UAB) as coordinators of the PhD programme in Materials Science. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rapid and high-resolution patterning of microstructure and composition in organic semiconductors using ‘molecular gates’

  • Perevedentsev, Aleksandr
  • Campoy Quiles, Mariano
Photolithography has been a major enabling tool for miniaturisation of silicon devices that underpinned the electronics revolution. Rapid, high-resolution patterning of key material characteristics would, similarly, accelerate the advent of molecular electronics and photonics. Here we advance a versatile approach employing local diffusion of functional small-molecular compounds through a solution-processed ‘molecular gate’ interlayer. Diffusion is activated using laser light or solvent vapour jets―a process that can be finely modulated down to molecule-on-demand deposition precision with almost photolithographic resolution (<5 μm) and speeds (3 mm s–1). Examples of principal pattern types are presented including molecular conformation for integrated photonics; chain orientation for polarised security features and micro-engineered electronics; and doping with local conductivity values >3 S cm–1 for improved electronic devices. Finally, we demonstrate the unique capability for one-step patterning of multiple functionalities by spatially modulating composition in ternary blends, leading to locally tunable photoluminescence from blue to red., We are indebted to Enrique Pascual (ICMAB-CSIC) for providing insights into laser patterning and Lou Kiss (Middlesex University) for freely shared advice on the preparation of the graphics. We express our deepest gratitude to Paul Smith (ETH Zürich) for critically reviewing the manuscript. We thank Miquel Casademont-Viñas (ICMAB-CSIC) for invaluable contribution to exploring the limits of the method, and Agustín Mihi and Andrés Gómez (ICMAB-CSIC) for assistance with optical spectroscopy and AFM analysis. We also thank Daniel Kremer and Hans-Werner Schmidt (Universität Bayreuth) for their customary hospitality and assistance with DSC measurements. We further acknowledge financial support from the Spanish Ministry of Economy, Industry and Competitiveness through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496) and project reference PGC2018-095411-B-I00, as well as the European Research Council (ERC) under grant agreement number 648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microfluidic-Assisted Blade Coating of Compositional Libraries for Combinatorial Applications: The Case of Organic Photovoltaics

  • Rodríguez Martínez, Xabier
  • Sevim, Semih
  • Xu, Xiaofeng
  • Franco, Carlos
  • Pamies, Paula
  • Córcoles, Laura
  • Rodriguez Trujillo, Romen
  • Campo, Francisco Javier del
  • Rodríguez San Miguel, David
  • deMello, Andrew J.
  • Pané, Salvador
  • Amabilino, David B.
  • Inganäs, Olle
  • Puigmartí Luis, Josep
  • Campoy Quiles, Mariano
Microfluidic technologies are highly adept at generating controllable compositional gradients in fluids, a feature that has accelerated the understanding of the importance of chemical gradients in biological processes. That said, the development of versatile methods to generate controllable compositional gradients in the solid‐state has been far more elusive. The ability to produce such gradients would provide access to extensive compositional libraries, thus enabling the high‐throughput exploration of the parametric landscape of functional solids and devices in a resource‐, time‐, and cost‐efficient manner. Herein, the synergic integration of microfluidic technologies is reported with blade coating to enable the controlled formation of compositional lateral gradients in solution. Subsequently, the transformation of liquid‐based compositional gradients into solid‐state thin films using this method is demonstrated. To demonstrate efficacy of the approach, microfluidic‐assisted blade coating is used to optimize blending ratios in organic solar cells. Importantly, this novel technology can be easily extended to other solution processable systems that require the formation of solid‐state compositional lateral gradients., The authors would like to acknowledge financial support from the Spanish Ministry of Economy, Industry and Competitiveness through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV‐2015‐0496) and project reference PGC2018‐095411‐B‐I00 as well as the European Research Council (ERC) under grant agreement no. 648901. J.P.‐L. acknowledges the European Research Council Starting Grant microCrysFact (ERC‐2015‐STG No. 677020) and the Swiss National Science Foundation (200021_181988) and ETH Zürich. R. R.‐T. acknowledges the support from Generalitat de Catalunya and the COFUND programme of the Marie Curie Actions of the 7th R&D Framework Programme of the European Union (BP‐B 00256). X.R.‐M. acknowledges the departments of Physics, Chemistry and Geology of the Autonomous University of Barcelona (UAB) as coordinators of the PhD programme in Materials Science. X.R.‐M. and C.F. acknowledge Nicole Kleger‐Schai from ETH Zürich for her valuable help in using the rheometer. X.R.‐M. and M.C.‐Q. acknowledge Dr. Joan M. Cabot from the University of Tasmania for fruitful discussions on 3D printing. D.B.A. thanks the University of Nottingham Beacon Propulsion Futures., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-Throughput Nanofabrication of Metasurfaces with Polarization-Dependent Response

  • Matricardi, Cristiano
  • García Pomar, Juan Luis
  • Molet, Pau
  • Pérez, Luis Alberto
  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
  • Mihi, Agustín
Metal nanostructures offer exciting ways to manage light at the nanoscale exploited in fields such as imaging, sensing, energy conversion, and information processing. The optical response of the metallic architectures can be engineered to exhibit photonic properties that span from plasmon resonances to more complex phenomena such as negative refractive index, optical chirality, artificial magnetism, and more. However, the latter optical properties are only observed in intricate architectures, which are highly demanding in terms of nanofabrication and hence less scalable and far away from device implementation. Here, a series of metasurfaces covering centimeter areas and operating in the visible spectrum are presented, which are produced from the combination of nanoimprinting lithography and oblique angle metal evaporation. The potential of this scalable approach is illustrated by easily fabricating metasurfaces engineered to exhibit artificial optical magnetism, tunable linear polarization dependent response, chirality with g‐factor of 0.2, and photoluminescence enhancement of 20 times over a 9 mm2 area., The Spanish Ministerio de Economía, Industria y Competitividad (MINECO) is gratefully acknowledged for its support through Grant No. MAT2016‐79053‐P and through Grant No. SEV‐2015‐0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program. This project received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement Nos. 637116, ENLIGHTMENT and 648901, FOREMAT) and the Generalitat de Catalunya program AGAUR 2017‐SGR‐00488. P.M. acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofunded by the ESF. L.A.P. is thankful to the Marie Sklodowska‐Curie Actions (H2020‐MSCA‐IF‐2018) for grant agreement No. 839402, PLASMIONICO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Homoconjugation in Light-Emitting Poly(phenylene methylene)s: Origin and Pressure-Enhanced Photoluminescence

  • Perevedentsev, Aleksandr
  • Francisco López, Adrián
  • Shi, Xingyuan
  • Braendle, Andreas
  • Caseri, Walter R.
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
The surprising optical properties of the non--conjugated polymer poly(phenylene methylene) (PPM) and its derivatives—that is, absorption in the 350–450 nm and photoluminescence (PL) in the 400–600 nm spectral regions—have been attributed to chromophores formed by homoconjugation along the polymer chain. The enabling role of homoconjugation, however, was hitherto ascertained primarily by excluding alternative origins of luminescence. The present study offers direct evidence for homoconjugation by employing optical and vibrational spectroscopy to investigate the interplay between microstructure and solid-state optical properties of PPM and its derivative poly(2,4,6-trimethylphenylene methylene) (PTMPM). In particular, polarized Raman and PL spectroscopy of melt-drawn fibers reveal a preferentially perpendicular orientation of the phenylene rings relative to the fiber axis, while, simultaneously, a preferentially parallel orientation of the transition dipole moment. PL spectroscopy under applied hydrostatic pressure yields a nearly 4-fold increase in PL intensity at 8 GPa, together with a surprising absence of excimer emission. These characteristics, being highly atypical of conventional -conjugated polymers, highlight the different origin of the optical properties of poly(phenylene methylene)s as well as unique opportunities for applications., The authors thank Drs Nathan Cheetham (Imperial College London) and Johannes Gierschner (IMDEA Nanociencia) for stimulating discussions. A.P. is indebted to the Great European Lockdown (GEL) network for enabling Prof. Paul Smith (ETH Zürich) to comprehensively review this manuscript on one of his lesser favored topics, for which he is also thanked sincerely. The Spanish Ministerio de Ciencia, Innovación y Universidades is gratefully acknowledged for its support through grant no. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence Program and through grant PGC2018-095411-B-100 (RAINBOW). We also thank the Catalan agency AGAUR for grant 2017-SGR-00488. AFL acknowledges a FPI fellowship (BES-2016-076913) from the Spanish Ministerio cofinanced by the European Social Fund and the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona in which he is enrolled. Financial support is also acknowledged from the European Research Council through project ERC CoG648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reduction of the Lattice Thermal Conductivity of Polymer Semiconductors by Molecular Doping

  • Zapata Arteaga, Osnat
  • Perevedentsev, Aleksandr
  • Marina, Sara
  • Martín, Jaime
  • Reparaz, J. S.
  • Campoy Quiles, Mariano
Here we show that molecular doping of polymer thermoelectrics increases the electrical conductivity while reducing the thermal conductivity. A high-throughput methodology based on annealing and doping gradients within individual films is employed to self-consistently analyze and correlate electrical and thermal characteristics for the equivalent of >100 samples. We focus on the benchmark material system poly(2,5- bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT) doped with molecular acceptor 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). The thermal conductivity of neat PBTTT films is dominated by the degree of crystallinity, with thermal percolation observed for annealing temperatures >170 °C. Upon doping the samples with a relatively low amount of F4TCNQ (anion content <1 mol %), the thermal conductivity exhibits a two-fold reduction without compromising the crystalline quality, which resembles the effect of alloy scattering observed in several inorganic systems. The analysis of the relation between thermal and electrical conductivities shows that thermal transport is dominated by a doping-induced reduced lattice contribution., We acknowledge financial support from the Spanish Ministry of Science and Innovation through projects PGC2018-095411- B-I00 and MAT2017-90024-P (TANGENTS)-EI/FEDER, UE projects; the Generalitat de Catalunya through grants 2017SGR488 and AGAUR 2018 PROD 00191; and from the European Research Council (ERC) under grant agreement no. 648901. O.Z.-A. acknowledges CONACYT-SENER for his Ph.D. scholarship (no. 472571). J.M. thanks MCIU for the Ramon y Cajal contract and grant PGC2018-094620-A-I00. ́ We thank Dr. Agusti ́ n Mihi for the access to and support with the FTIR equipment. We acknowledge the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). We thank Andreś Gomez Rodri ́ ́ guez from the Scanning Probe Microscopy Laboratory (ICMAB-CSIC) for a set of AFM measurements. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Suppressing Co-Crystallization of Halogenated Non-Fullerene Acceptors for Thermally Stable Ternary Solar Cells

  • Hultmark, Sandra
  • Paleti, Sri Harish Kumar
  • Harillo Baños, Albert
  • Marina, Sara
  • Nugroho, Ferry Anggoro Ardy
  • Liu, Yanfeng
  • Ericsson, Leif K. E.
  • Li, Ruipeng
  • Martín, Jaime
  • Bergqvist, Jonas
  • Langhammer, Christoph
  • Zhang, Fengling
  • Yu, Liyang
  • Campoy Quiles, Mariano
  • Moons, Ellen
  • Baran, Derya
  • Müller, Christian
While photovoltaic blends based on non‐fullerene acceptors are touted for their thermal stability, this type of acceptor tends to crystallize, which can result in a gradual decrease in photovoltaic performance and affects the reproducibility of the devices. Two halogenated indacenodithienothiophene‐based acceptors that readily co‐crystallize upon mixing are studied, which indicates that the use of an acceptor mixture alone does not guarantee the formation of a disordered mixture. The addition of the donor polymer to the acceptor mixture readily suppresses the crystallization, which results in a fine‐grained ternary blend with nanometer‐sized domains that do not coarsen due to a high Tg ≈ 200 °C. As a result, annealing at temperatures of up to 170 °C does not markedly affect the photovoltaic performance of ternary devices, in contrast to binary devices that suffer from acceptor crystallization in the active layer. The results indicate that the ternary approach enables the use of high‐temperature processing protocols, which are needed for upscaling and high‐throughput fabrication of organic solar cells. Further, ternary devices display a stable photovoltaic performance at 130 °C for at least 205 h, which indicates that the use of acceptor mixtures allows to fabricate devices with excellent thermal stability., S.H. and S.H.K.P. contributed equally to this work. The authors acknowledge the King Abdullah University of Science and Technology (KAUST) Office of Sponsored Research (OSR) under OSR‐2018‐CPF‐4106 and the Knut and Alice Wallenberg Foundation through the project “Mastering Morphology for Solution‐borne Electronics” (2016.0059) for funding. M.C.‐Q. and A.H. acknowledge the European Research Council (ERC) for funding under grant agreement no. 648901. The authors thank MCIU for a Ramón y Cajal contract, Ikerbasque Foundation for the Fellow program (J.M) and grants Ref. PGC2018‐094620‐A‐100, SEV‐2015‐0496 and PGC2018‐095411‐B‐100. L.Y. thanks the National Nature Science Foundation of China (NSFC 21905185) for financial support. The authors thank the National Synchrotron Light Source II, Brookhaven National Lab (Suffolk, Upton, New York, USA) for beamtime., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A setup to measure the Seebeck coefficient and electrical conductivity of anisotropic thin-films on a single sample

  • Dörling, Bernhard
  • Zapata Arteaga, Osnat
  • Campoy Quiles, Mariano
This work documents an all-in-one custom setup, that allows to measure the in-plane Seebeck coefficients and electrical conductivities of anisotropic thin film samples close to room temperature. Both pairs, Sk,σk, and S⊥ and σ⊥ can be measured using four contacts on the same sample, reducing measurement time and minimizing potential sources of error due to aggregating data from several distinct samples. The setup allows to measure the electrical conductivity of isotropic samples using the well-known van der Pauw method. For samples with in-plane anisotropy, the two components σk and σ⊥ can be extracted from the same type of measurements by performing additional calculations. Using the same contacts, the Seebeck coefficient along one direction is measured using a differential state-state method. After rotating the sample by 90◦ , the orthogonal Seebeck component can be measured. In order to show the generality of the method, we measure different types of samples, from metal references to oriented doped conjugated polymers., The authors would like to thank José P. Jurado for helpful discussions and Rafael León for his help designing and machining the sample holder. The authors acknowledge the financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Program for Centers of Excellence in R&D (Grant No. SEV-2015-0496 and Grant No. PGC2018-095411-B-I00), from the Generalitat de Catalunya, through Grant No. AGAUR 2018 PROD 00191, and from the European Research Council (ERC), under Grant Agreement No. 648901. O.Z.-A. acknowledges CONACYTSENER for his Ph.D. scholarship (Grant No. 472571)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structure dependent photostability of ITIC and ITIC-4F†

  • Ciammaruchi, Laura
  • Zapata Arteaga, Osnat
  • Gutiérrez Fernández, Edgar
  • Martín, Jaime
  • Campoy Quiles, Mariano
Strong synthetic and engineering efforts have taken the efficiency of non-fullerene acceptor (NFA) based organic solar cells above 18% in a few years. Nonetheless, a deep understanding of the fundamental properties of this class of molecules is still missing. Here, we systematically investigated the morphological properties of two high efficient indacenodithienothiophene-based NFAs – namely ITIC and ITIC-4F – in order to correlate the hydrogen/fluorination substitutions with the materials structural and stability properties. We confirm that each NFA structurally evolves with increasing temperature into several polymorphs, identifying through spectroscopy their corresponding narrow temperature ranges. We demonstrate that the materials’ response to accelerated stress tests (ASTs) is both substitution and polymorph dependent. ASTs underlined that the most vulnerable molecular segment corresponds to the thienothiophene C[double bond, length as m-dash]C bond along the central backbone, together with the C[double bond, length as m-dash]C linkage between the electron-rich donor and the electron-deficient acceptor moieties, with a degradation process triggered by oxygen and light. ITIC-4F showed lower oxidation capability and a higher bond strength retaining effect compared to ITIC. Lastly, the AST approach employed here allowed for the extrapolation of morphological and stability-related features within a high-throughput framework, and can be considered as a valuable methodological tool for future stability-related studies., The authors would like to thank Dr Tommaso Salzillo and Dr Valentina Bulova for very fruitful scientific discussions. The authors kindly acknowledge the financial support from Ministerio de Economía y Competitividad of Spain through the “Severo Ochoa” Programme for Centres of Excellence in R&D and projects PGC2018-095411-B-I00 and PGC2018-094620-A-I00, as well as the European Research Council (ERC) under grant agreement no. 648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Correlating the Phase Behavior with the Device Performance in Binary Poly-3-hexylthiophene: Nonfullerene Acceptor Blend Using Optical Probes of the Microstructure

  • Rezasoltani, Elham
  • Guilbert, Anne A. Y.
  • Yan, Jun
  • Rodríguez Martínez, Xabier
  • Azzouzi, Mohammed
  • Eisner, Flurin
  • Tuladhar, Sachetan M.
  • Hamid, Zeinab
  • Wadsworth, Andrew
  • McCulloch, Iain
  • Campoy Quiles, Mariano
  • Nelson, Jenny
The performance of photovoltaic devices based on blends of conjugated polymers with nonfullerene acceptors depends on the phase behavior and microstructure of the binary, which in turn depends on the chemical structures of the molecular components and the blend composition. We investigate the correlation between the molecular structure, composition, phase behavior, and device performance of a model system consisting of semicrystalline poly-3-hexylthiophene (P3HT) as the donor polymer and three nonfullerene acceptors, two of which (O-IDTBR/EH-IDTBR) have a planar core with different side chains and one (O-IDFBR) of which has a twisted core. We combine differential scanning calorimetry with optical measurements including UV–Vis spectroscopy, photoluminescence, spectroscopic ellipsometry, and Raman spectroscopy and photovoltaic device performance measurements, all at varying blend composition. For P3HT:IDTBR blends, the crystallinity of polymer and acceptor is preserved over a wide composition range and the blend displays a eutectic phase behavior, with the optimum solar cell composition lying close to the eutectic composition. For P3HT:IDFBR blends, increasing acceptor content disrupts the polymer crystallinity, and the optimum device composition appears to be limited by polymer connectivity rather than being linked to the eutectic composition. The optical probes allow us to probe both the crystalline and amorphous phases, clearly revealing the compositions at which component mixing disrupts crystallinity., E.R. is grateful to the Fonds de Recherche du Quebec-Nature et technologies (FRQNT) for a postdoctoral fellowship and acknowledges the financial support from the European Cooperation in Science and Technology. J.N. acknowledges the financial support from the Engineering and Physical Science Research Council (grants nos. EP/P005543/1, EP/ R023581/1, and EP/P032591/1) and from the European Research Council for funding (grant agreement no. 742708). J.N. and E.R. thank the Helmholtz Foundation for a Helmholtz International Fellow Award. A.A.Y.G. thanks the EPSRC for a postdoctoral fellowship award (grant no. EP/P00928X/1). The authors at ICMAB would like to acknowledge the financial support from the Spanish Ministry of Economy, Industry and Competitiveness through the “Severo Ocho” Program for Centers of Excellence in R&D (SEV-2015-0496) and project reference PGC2018-095411-B-I00 as well as the European Research Council (ERC) under grant agreement no. 648901. I.M. acknowledges funding from KAUST, as well as EPSRC Project EP/G037515/1, EP/M005143/1, ECFP7 Project SC2 (610115), and EP/N509486/1 for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydroxypropyl Cellulose Adhesives for Transfer Printing of Carbon Nanotubes and Metallic Nanostructures

  • Dore, Camilla
  • Dörling, Bernhard
  • García Pomar, Juan Luis
  • Campoy Quiles, Mariano
  • Mihi, Agustín
Transfer printing is one of the key nanofabrication techniques for the large‐scale manufacturing of complex device architectures. It provides a cost‐effective and high‐throughput route for the integration of independently processed materials into spatially tailored architectures. Furthermore, this method enables the fabrication of flexible and curvilinear devices, paving the way for the fabrication of a new generation of technologies for optics, electronics, and biomedicine. In this work, hydroxypropyl cellulose (HPC) membranes are used as water soluble adhesives for transfer printing processes with improved performance and versatility compared to conventional silicone alternatives. The high‐water solubility and excellent mechanical properties of HPC facilitate transfer printing with high yield for both metal and carbon nanotubes (CNTs) inks. In the case of metal inks, crack‐free stripping of silver films and the simple fabrication of Moiré Plasmonic architectures of different geometries are demonstrated. Furthermore, HPC membranes are used to transfer print carbon nanotube films with different thicknesses and up to 77% transparency in the visible and near infrared region with potential applications as transparent conductive substrates. Finally, the use of prepatterned HPC membranes enables nanoscale patterning of CNT with feature resolution down to 1 µm., This project received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 637116, ENLIGHTMENT and No. 648901) and the Generalitat de Catalunya program AGAUR 2017‐SGR‐00488. The Spanish Ministerio de Ciencia e Innovación is gratefully acknowledged for its support through Grant Nos. PGC2018‐095411‐B‐I00, PID2019‐106860GB‐I00, and SEV‐2015‐0496, in the framework of the Spanish Severo Ochoa Centre of Excellence program. This work was done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparing different geometries for photovoltaic-thermoelectric hybrid devices based on organics

  • Jurado, José Piers
  • Dörling, Bernhard
  • Zapata Arteaga, Osnat
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
Coupling thermoelectrics (TE) with photovoltaics (PV) has emerged as an approach to solid-state solar harvesting, directly converting light and infrared heat into electricity. In this work, we compare PV-TE hybrid devices based on organic semiconductors in three different geometries: a reflection geometry, a non-contact transmission geometry, and a contact transmission geometry. The temperature rises of films of common organic thermoelectric materials, including poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), single-walled carbon nanotubes (swCNT), and poly[2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT), were measured in configurations representative of the proposed geometries. Because organic semiconductors possess broadband light absorption and low thermal conductivities, a significant rise in temperature was observed under illumination for all geometries. We find, however, that the best configuration is, in fact, the transmission contact mode because it sums two effects. Operating under 1 sun illumination, the temperature of a commercial organic PV module increased by ≈30 K, which leads to an enhancement in OPV performance compared to room temperature. After attaching a thermoelectric to the OPV module, losses from convection are reduced, and the OPV module heats up even more, further increasing its efficiency while additionally enabling thermoelectric generation. Finally, we calculate theoretical thermoelectric efficiencies for the materials and their respective power densities., The authors acknowledge financial support from the Spanish Ministry Science and Innovation through the “Severo Ochoa” Program for Centers of Excellence in R&D SEV-2015-0496 (FUNMAT) and CEX2019-000917-S (FUNFUTURE), and PGC2018-095411-B-I00 (RAINBOW) projects; from the Generalitat de Catalunya through grants 2017SGR488 and AGAUR 2018 PROD 00191; and from the European Research Council (ERC) under grant agreement no. 648901. This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 713673. J. P. J. has received financial support through the “la Caixa” INPhINIT Fellowship Grant for Doctoral studies at Spanish Research Centers of Excellence (Grant code: LCF/BQ/IN17/11620035), “la Caixa” Banking Foundation (ID100010434), Barcelona, Spain. O. Z. A. acknowledges CONACYT-SENER for his PhD scholarship (no. 472571). J. P. J. acknowledges the departments of Physics, Chemistry and Geology of the Autonomous University of Barcelona (UAB) as coordinators of the PhD programme in Materials Science. The authors thank Dr A. Roig, Dr A. Laromaine and Dr D. Abol-Fotouh (ICMAB-CSIC) for the CNT:cellulose sample preparation and fruitful discussions. The authors thank Dr Aleksandr Perevedentsev for his help with sample preparation, and Mr Pau Molet for his help with the FTIR measurements. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Accelerating organic solar cell material’s discovery: high-throughput screening and big data

  • Rodríguez Martínez, Xabier
  • Pascual San José, Enrique
  • Campoy Quiles, Mariano
The discovery of novel high-performing materials such as non-fullerene acceptors and low band gap donor polymers underlines the steady increase of record efficiencies in organic solar cells witnessed during the last years. Nowadays, the resulting catalogue of organic photovoltaic materials is becoming unaffordably vast to be evaluated following classical experimentation methodologies: their requirements in terms of human workforce time and resources are prohibitively high, which rest momentum to the evolution of the organic photovoltaic technology. As a result, high-throughput experimental and computational methodologies are fostered to leverage their inherently high exploratory paces and accelerate novel material’s discovery. In this review, we present some of the computational (pre)screening approaches performed prior to experimentation to select the most promising molecular candidates from the available materials libraries or, alternatively, generate molecules beyond human intuition. Then, we outline the main high-throuhgput experimental screening and characterization approaches with application in organic solar cells, namely those based on lateral parametric gradients (measuring-intensive) and on automated device prototyping (fabrication-intensive). In both cases, experimental datasets are generated at unbeatable paces, which notably enhance big data readiness. Herein, machine-learning algorithms find a rewarding application niche to retrieve quantitative structure-activity relationships and extract molecular design rationale, which are expected to keep the material’s discovery pace up in organic photovoltaics., This work was supported by the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE, CEX2019-000917-S) and project reference PGC2018-095411-B-I00. The authors acknowledge financial support from the European Research through project ERC CoG 648901, and support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). The authors thank Prof. C. Brabec and Dr. J. Hauch for fruitful discussions on the topics of this review. The table of contents image and Figure 10 in the manuscript have been designed using freely available resources from Flaticon.com., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Color-tunable hybrid heterojunctions as semi-transparent photovoltaic windows for photoelectrochemical water splitting

  • Eisner, Flurin
  • Tam, Brian
  • Belova, Valentina
  • Ow, Wesley
  • Yan, Jun
  • Azzouzi, Mohammed
  • Kafizas, Andreas
  • Campoy Quiles, Mariano
  • Hankin, Anna
  • Nelson, Jenny
The strong but narrow-bandwidth absorption spectra of organic semiconductors make them excellent candidates for semi-transparent solar cell applications in which color specificity is important. In this study, using a hybrid heterojunction combining the transparent inorganic semiconductor copper thiocyanate (CuSCN) with organic semiconductors (C70, PC70BM, C60, ITIC, IT-4F, or Y6), we show that simple color-tunable solar cells can be fabricated in which the transmission spectrum is determined solely by choice of the organic semiconductor. Using a joint electrical-optical model, we show that it is possible to combine the unique attributes of high photovoltage and color tunability to use these heterojunctions as photovoltaic windows in tandem photoelectrochemical (PEC)-photovoltaic (PV) cells. We demonstrate that this configuration can lead to a reduction in the parasitic absorption losses in the PEC-PV cells and, thus, to solar-to-hydrogen efficiencies (>3%) that are higher than that predicted using the traditionally used architecture in which the PV is placed behind the PEC., F.E. thanks the Engineering and Physical Sciences Research Council (EPSRC) for support via a postdoctoral prize fellowship. J.N. is grateful for funding from the EPSRC (grants EP/ P005543/1 and EP/M025020/1) and the European Research Council (ERC) under the European Union Horizon 2020 Research and Innovation Program (grant agreement 742708). M.C.Q. and V.B. thank the ERC through support via grant agreement 648901. B.T. thanks the Imperial College President’s Ph.D. scholarship scheme. A.K. thanks the Imperial College for a junior research fellowship, the EPSRC for a Capital Award Emphasising Support for Early Career Researchers, and the Royal Society for an equipment grant (RSG\R1\180434)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of Quencher, Geometry, and Light Outcoupling on the Determination of Exciton Diffusion Length in Nonfullerene Acceptors

  • Belova, Valentina
  • Perevedentsev, Aleksandr
  • Gorenflot, Julien
  • Castro, Catherine S. P. De
  • Casademont Viñas, Miquel
  • Paleti, Sri Harish Kumar
  • Karuthedath, Safakath
  • Baran, Derya
  • Laquai, Frédéric
The correct determination of the exciton diffusion length (LD) in novel organic photovoltaics (OPV) materials is an important, albeit challenging, task required to understand these systems. Herein, a high-throughput approach to probe LD in nonfullerene acceptors (NFAs) is reported, that builds upon the conventional photoluminescence (PL) surface quenching method using NFA layers with a graded thickness variation in combination with spectroscopic PL mapping. The method is explored for two archetypal NFAs, namely, ITIC and IT-4F, using PEDOT:PSS and the donor polymer PM6 as two distinct and practically relevant quencher materials. Interestingly, conventional analysis of quenching efficiency as a function of acceptor layer thickness results in a threefold difference in LD values depending on the specific quencher. This discrepancy can be reconciled by accounting for the differences in light in- and outcoupling efficiency for different multilayer architectures. In particular, it is shown that the analysis of glass/acceptor/PM6 structures results in a major overestimation of LD, whereas glass/acceptor/PEDOT:PSS structures give no significant contribution to outcoupling, yielding LD values of 6−12 and 8−18 nm for ITIC and IT-4F, respectively. Hence, practical guidelines for quencher choice, sample geometries, and analysis approach for the accurate assessment of LD are provided., V.B., A.P., and J.G. contributed equally to this work. The authors acknowledge that this research was financially supported by the European Research Council (ERC) under grant agreement no. 648901. The authors also acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa Program for Centers of Excellence in R&D (CEX2019-000917-S) and project PGC2018-095411-B-I00. This publication was based upon work supported by the King Abdullah University of Science and Technology (KAUST) Office of Sponsored Research (OSR) under award no: OSR-2018-CARF/CCF-3079 and award no. OSR-CRG2018-3746. The authors thank Anastasia Ragulskaya (The University of Tübingen) for contributing to the development of the computational model., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-Throughput Screening of Blade-Coated Polymer:Polymer Solar Cells: Solvent Determines Achievable Performance

  • Harillo Baños, Albert
  • Fan, Qunping
  • Riera Galindo, Sergi
  • Wang, Ergang
  • Inganäs, Olle
  • Campoy Quiles, Mariano
Optimization of a new system for organic solar cells is a multiparametric analysis problem that requires substantial efforts in terms of time and resources. The strong microstructure-dependent performance of polymer:polymer cells makes them particularly difficult to optimize, or to translate previous knowledge from spin coating into more scalable techniques. In this work, the photovoltaic performance of blade-coated devices was studied based on the promising polymer:polymer system PBDB-T and PF5-Y5 as donor and acceptor, respectively. Using the recently developed high-throughput methodology, the system was optimized for multiple variables, including solvent system, active layer composition, ratio, and thickness, among others, by fabricating more than 500 devices with less than 24 mg of each component. As a result, the power conversion efficiency of the blade-coated devices varied from 0.08 to 6.43 % in the best device. The performed statistical analysis of the large experimental data obtained showed that solvent selection had the major impact on the final device performance due to its influence on the active layer microstructure. As a conclusion, the use of the plot of the device efficiency in the Hansen space was proposed as a powerful tool to guide solvent selection in organic photovoltaics., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa” Program for Centers of Excellence in R&D (No. CEX2019-000917-S), and project PGC2018-095411-B−I00, as well as from the European Research Council (ERC) under Grant Agreement No. 648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design Rules for Polymer Blends with High Thermoelectric Performance

  • Zapata Arteaga, Osnat
  • Marina, Sara
  • Zuo, Guangzheng
  • Xu, Kai
  • Dörling, Bernhard
  • Pérez, Luis Alberto
  • Reparaz, J. Sebastian
  • Martín, Jaime
  • Kemerink, Martijn
  • Campoy Quiles, Mariano
A combinatorial study of the effect of in-mixing of various guests on the thermoelectric properties of the host workhorse polymer poly[2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT) is presented. Specifically, the composition and thickness for doped films of PBTTT blended with different polymers are varied. Some blends at guest weight fractions around 10–15% exhibit up to a fivefold increase in power factor compared to the reference material, leading to zT values around 0.1. Spectroscopic analysis of the charge-transfer species, structural characterization using grazing-incidence wide-angle X-ray scattering, differential scanning calorimetry, Raman, and atomic force microscopy, and Monte Carlo simulations are employed to determine that the key to improved performance is for the guest to promote long-range electrical connectivity and low disorder, together with similar highest occupied molecular orbital levels for both materials in order to ensure electronic connectivity are combined., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa" Program for Centers of Excellence in R&D (No. CEX2019-000917-S) and projects PGC2018-095411- B-I00, PGC2018-094620-A-I00, and MAT2017-90024-P (TANGENTS)-EI/Fondo Europeo de Desarrollo Regional and from the European Research Council (ERC) under Grant Agreements Nos. 648901 and 963954. J.M. thanks Ministerio de Ciencia, Innovación y Universidades for the Ramón y Cajal contract. The authors are thankful to Dr. Agustín Mihi for access and support with the FTIR equipment. The authors acknowledge the European funding (European Regional Development Fund and European Social Fund). The authors thank Andrés Gómez Rodríguez from the Scanning Probe Microscopy Laboratory (ICMAB-CSIC) for a set of fine AFM measurements. GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. Finally, the authors acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unidad de Recursos de Información Científica para la Investigación (URICI). M.K. thanks the Carl Zeiss Foundation for financial support. G.Z. acknowledges the support from Alexander von Humboldt Foundation., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Matching electron transport layers with a non-halogenated and low synthetic complexity polymer:fullerene blend for efficient outdoor and indoor organic photovoltaics

  • Rodríguez Martínez, Xabier
  • Riera Galindo, Sergi
  • Cong, Jiayan
  • Osterberg, Thomas
  • Campoy Quiles, Mariano
  • Inganäs, Olle
The desired attributes of organic photovoltaics (OPV) as a low cost and sustainable energy harvesting technology demand the use of non-halogenated solvent processing for the photoactive layer (PAL) materials, preferably of low synthetic complexity (SC) and without compromising the power conversion efficiency (PCE). Despite their record PCEs, most donor–acceptor conjugated copolymers in combination with non-fullerene acceptors are still far from upscaling due to their high cost and SC. Here we present a non-halogenated and low SC ink formulation for the PAL of organic solar cells, comprising PTQ10 and PC61BM as donor and acceptor materials, respectively, showing a record PCE of 7.5% in blade coated devices under 1 sun, and 19.9% under indoor LED conditions. We further study the compatibility of the PAL with 5 different electron transport layers (ETLs) in inverted architecture. We identify that commercial ZnO-based formulations together with a methanol-based polyethyleneimine-Zn (PEI-Zn) chelated ETL ink are the most suitable interlayers for outdoor conditions, providing fill factors as high as 74% and excellent thickness tolerance (up to 150 nm for the ETL, and >200 nm for the PAL). In indoor environments, SnO2 shows superior performance as it does not require UV photoactivation. Semi-transparent devices manufactured entirely in air via lamination show indoor PCEs exceeding 10% while retaining more than 80% of the initial performance after 400 and 350 hours of thermal and light stress, respectively. As a result, PTQ10:PC61BM combined with either PEI-Zn or SnO2 is currently positioned as a promising system for industrialisation of low cost, multipurpose OPV modules., The authors are thankful to Prof. Hans Arwin (Linköping University) for his valuable help in ellipsometry measurements and their corresponding optical modelling. The authors acknowledge Dr Luis Ever Aguirre (Epishine AB) for the acquisition of the indoor LED spectrum employed with laminated devices and Prof. Fengling Zhang (Linköping University) for lending the QE-Pro spectrometer. X. R.-M., S. R.-G., J. C. and O. I. acknowledge the Knut and Alice Wallenberg foundation for funding. The authors thank Dr Bernhard Dörling for building the electronic controller to make the speed profiles with the blade coater, and M. Gibert-Roca for designing and building the multiplexor for the sequential and rapid measurement of the 24 pixels in each sample. M. C. Q. greatly acknowledges funding by the Ministry of Science and Innovation through grants (CEX2019-000917-S) and PGC2018-095411-B-I00, and by the European Research Council through grant agreement no. 648901., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Identifying structure–absorption relationships and predicting absorption strength of non-fullerene acceptors for organic photovoltaics

  • Yan, Jun
  • Rodríguez Martínez, Xabier
  • Pearce, Drew
  • Douglas, Hana
  • Bili, Danai
  • Azzouzi, Mohammed
  • Eisner, Flurin
  • Virbule, Alise
  • Rezasoltani, Elham
  • Belova, Valentina
  • Dörling, Bernhard
  • Few, Sheridan
  • Szumska, Anna A.
  • Hou, Xueyan
  • Zhang, Guichuan
  • Yip, Hin-Lap
  • Campoy Quiles, Mariano
  • Nelson, Jenny
Non-fullerene acceptors (NFAs) are excellent light harvesters, yet the origin of their high optical extinction is not well understood. In this work, we investigate the absorption strength of NFAs by building a database of time-dependent density functional theory (TDDFT) calculations of ∼500 π-conjugated molecules. The calculations are first validated by comparison with experimental measurements in solution and solid state using common fullerene and non-fullerene acceptors. We find that the molar extinction coefficient (εd,max) shows reasonable agreement between calculation in vacuum and experiment for molecules in solution, highlighting the effectiveness of TDDFT for predicting optical properties of organic π-conjugated molecules. We then perform a statistical analysis based on molecular descriptors to identify which features are important in defining the absorption strength. This allows us to identify structural features that are correlated with high absorption strength in NFAs and could be used to guide molecular design: highly absorbing NFAs should possess a planar, linear, and fully conjugated molecular backbone with highly polarisable heteroatoms. We then exploit a random decision forest algorithm to draw predictions for εd,max using a computational framework based on extended tight-binding Hamiltonians, which shows reasonable predicting accuracy with lower computational cost than TDDFT. This work provides a general understanding of the relationship between molecular structure and absorption strength in π-conjugated organic molecules, including NFAs, while introducing predictive machine-learning models of low computational cost., J. N., J. Y., D. P., M. A., F. E., and E. R. thank the European Research Council for support under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 742708 and 648901). The authors at ICMAB acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa” Program for Centers of Excellence in R&D (No. CEX2019-000917-S), and project PGC2018-095411-B-I00. E. R. is grateful to the Fonds de Recherche du Quebec-Nature et technologies (FRQNT) for a postdoctoral fellowship and acknowledges financial support from the European Cooperation in Science and Technology. M. A. thanks the Engineering and Physical Sciences Research Council (EPSRC) for support via doctoral studentships. F. E. thanks the Engineering and Physical Sciences Research Council (EPSRC) for support via the Post-Doctoral Prize Fellowship. X. R.-M. acknowledges Prof. Olle Inganäs and the Knut and Allice Wallenberg Foundation for funding of his current postdoctoral position. H.-L. Yip thanks the support from Guangdong Major Project of Basic and Applied Basic Research (2019B030302007). The TOC figure and Fig. 5a in the manuscript include freely available resources from Flaticon.com. J. Y. thank Xiaodan Ge for her support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anisotropic thermoreflectance thermometry: A contactless frequency-domain thermoreflectance approach to study anisotropic thermal transport

  • Pérez, Luis Alberto
  • Xu, Kai
  • Wagner, Markus R.
  • Dörling, Bernhard
  • Perevedentsev, Aleksandr
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
  • Alonso Carmona, M. Isabel
  • Reparaz, J. Sebastian
We developed a novel contactless frequency-domain thermoreflectance approach to study thermal transport, which is particularly convenient when thermally anisotropic materials are considered. The method is based on a line-shaped heater geometry, produced with a holographic diffractive optical element, instead of using a spot heater as in conventional thermoreflectance. The heater geometry is similar to the one used in the 3-omega method, however, keeping all the technical advantages offered by non-contact methodologies. The present method is especially suitable to determine all the elements of the thermal conductivity tensor, which is experimentally achieved by simply rotating the sample with respect to the line-shaped optical heater. We provide the mathematical solution of the heat equation for the cases of anisotropic substrates, thin films, and multilayer systems. This methodology allows an accurate determination of the thermal conductivity and does not require complex modeling or intensive computational efforts to process the experimental data, i.e., the thermal conductivity is obtained through a simple linear fit ("slope method"), in a similar fashion to the 3-omega method. We demonstrate the potential of this approach by studying isotropic and anisotropic materials in a wide range of thermal conductivities. In particular, we have studied the following inorganic and organic systems: (i) glass, Si, and Ge substrates (isotropic), (ii) β-Ga2O3 and a Kapton substrate (anisotropic), and (iii) a 285 nm thick SiO2 thin film deposited on a Si substrate. The accuracy in the determination of the thermal conductivity is estimated as ≈5%, whereas the temperature uncertainty is ΔT ≈ 3 mK., The authors acknowledge financial support from the Spanish Ministerio de Economía, Industria y Competitividad, through Grant No. CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and Grant Nos. PID2020-119777GB-I00 (THERM2MAIN), PDC2021-121814-I00 (COVEQ), PGC2018-095411-B-100 (RAINBOW), MAT2017-90024-P (TANGENTS)-EI/FEDER, and 2020AEP141; the Generalitat de Catalunya through Grant Nos. 2017SGR488 and AGAUR 2018 PROD 00191; and from the European Research Council (ERC) under Grant Agreement No. 648901., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On The Thermal Conductivity of Conjugated Polymers for Thermoelectrics

  • Rodríguez Martínez, Xabier
  • Saiz, Fernan
  • Dörling, Bernhard
  • Marina, Sara
  • Guo, Jiali
  • Xu, Kai
  • Chen, Hu
  • Martin, Jaime
  • McCulloch, Iain
  • Rurali, Riccardo
  • Reparaz, J. Sebastian
  • Campoy Quiles, Mariano
The thermal conductivity (κ) governs how heat propagates in a material, and thus is a key parameter that constrains the lifetime of optoelectronic devices and the performance of thermoelectrics (TEs). In organic electronics, understanding what determines κ has been elusive and experimentally challenging. Here, by measuring κ in 17 π-conjugated materials over different spatial directions, it is statistically shown how microstructure unlocks two markedly different thermal transport regimes. κ in long-range ordered polymers follows standard thermal transport theories: improved ordering implies higher κ and increased anisotropy. κ increases with stiffer backbones, higher molecular weights and heavier repeat units. Therein, charge and thermal transport go hand-in-hand and can be decoupled solely via the film texture, as supported by molecular dynamics simulations. In largely amorphous polymers, however, κ correlates negatively with the persistence length and the mass of the repeat unit, and thus an anomalous, albeit useful, behavior is found. Importantly, it is shown that for quasi-amorphous co-polymers (e.g., IDT-BT) κ decreases with increasing charge mobility, yielding a 10-fold enhancement of the TE figure-of-merit ZT compared to semi-crystalline counterparts (under comparable electrical conductivities). Finally, specific material design rules for high and low κ in organic semiconductors are provided., The authors would like to acknowledge financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Programme for Centers of Excellence in R&D and project reference PID2021-128924OB-I00 as well as the European Research Council (ERC) under grant agreement no. 648901. This work was financially supported by the European Commission through the Marie Skłodowska-Curie projects HORATES (GA-955837). J.M. is also grateful to the Spanish Ministry of Science and Innovation through project PGC2018-094620-A-I00. The authors also acknowledge the support from the Marie Skłodowska-Curie program (action no. 793726 – TELIOTES) and the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources. The authors acknowledge Prof. Alejandro R. Goñi (ICMAB-CSIC, ICREA) for his valuable help in setting up the Raman thermometry measurement platform. The authors are thankful to Dr. Aleksandr Perevedentsev (ICMAB-CSIC) for his know-how regarding the fabrication of free-standing films, as well as for the preparation of the drop cast DH6T films. The authors are very thankful to Prof. Paul Smith (ETH Zürich) for fruitful discussions about polymer processing and Prof. Christian Müller for his useful comments on this work, and the suggestions regarding thermal diffusivity. The authors also thank Andrés Gómez for performing the nanoindentation experiments. I.M. and H.C. acknowledge King Abdullah University of Science and Technology Office of Sponsored Research (OSR) under awards no. OSR-2018-CARF/CCF-3079, and OSR-4106 CPF2019 as well as EC FP7 Project SC2 (610115)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

What Makes Thickness-Tolerant Organic Solar Cells?

  • Rodríguez Martínez, Xabier
  • Tormann, Constantin
  • Sanz Lleó, Marta
  • Dörling, Bernhard
  • Gibert Roca, Martí
  • Harillo Baños, Albert
  • Torimtubun, Alfonsina Abat Amelenan
  • Pascual San José, Enrique
  • Jurado, José Piers
  • López Mir, Laura
  • Kemerink, Martijn
  • Campoy Quiles, Mariano
Relatively thick-film organic photovoltaics (OPVs) are desirable to spark commercialization through mass-printing methods. Thickness-resilient donor:acceptor blends are, however, scarce and not fully understood. The interplay between electronic, optical, and microstructural properties of the photoactive layer (PAL) generates a multi-parametric space where rationalization is far from trivial. In this work, high-throughput experimentation, simulations, and machine learning (ML) methods are leveraged to provide material and device insights toward thickness-resilient OPVs. From a database of 720 inverted devices and 20 different donor:acceptor blends, two main blend families are identified in terms of their resilience against increased PAL thickness (>200 nm). These are archetypically represented by PBDB-T:ITIC (thickness-sensitive) and PTQ10:Y6 (thickness-resilient). Kinetic Monte Carlo (kMC) simulations elucidate that the blend morphology alone, either in the form of an effective medium or energy cascade, can explain the experimental short-circuit current density and open-circuit voltage trends without tweaking the recombination parameters (cf. drift-diffusion, DD). High fill factors (FFs) in thick-film devices cannot, however, be reproduced by the kMC or DD simulations. ML models show that complementary absorbing donors and acceptors (shifted absorption onsets) mixed in balanced weight ratios provide a favorable hole back-transfer efficiency to increase the FF in thick-film devices., The authors acknowledge Prof. Martin Heeney and Dr. Zhuping Fei for the synthesis of ITIC-C8 and ITIC-C2C6 in a previous work. This work was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades under Grants PID2021-128924OB-I00, TED2021-131911B-I00 and CEX2019-000917-S in the framework of the Spanish Severo Ochoa Centre of Excellence. The authors acknowledge financial support from the European Research Council through project ERC CoG 648901. This work was supported by the MADRAS project funded by the European Union Horizon 2020 research and innovation program under grant agreement No. 862492. X.R.M. acknowledges the Alexander von Humboldt Foundation for funding. J.P.J. has received financial support through the “la Caixa” INPhINIT Fellowship Grant (Grant code: LCF/BQ/IN17/11620035). M.K. thanks the Carl Zeiss Foundation for financial support. The authors thank all past and present FOREMATICS for fruitful discussions., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Microfluidic‐assisted blade coating of compositional libraries for combinatorial applications: the case of organic photovoltaics

  • Rodríguez Martínez, Xabier
  • Sevim, Semih
  • Xu, Xiaofeng
  • Franco, Carlos
  • Pamies-Puig, Paula
  • Córcoles Guija, Laura
  • Rodríguez Trujillo, Romén
  • Campo, Francisco Javier del
  • Rodríguez San Miguel, David
  • deMello, Andrew J.
  • Pané, Salvador
  • Amabilino, David B.
  • Inganäs, Olle
  • Puigmartí-Luis, Josep
  • Campoy Quiles, Mariano
Microfluidic technologies are highly adept at generating controllable compositional gradients in fluids, a feature that has accelerated the understanding of the importance of chemical gradients in biological processes. That said, the development of versatile methods to generate controllable compositional gradients in the solid‐state has been far more elusive. The ability to produce such gradients would provide access to extensive compositional libraries, thus enabling the high‐throughput exploration of the parametric landscape of functional solids and devices in a resource‐, time‐, and cost‐efficient manner. Herein, the synergic integration of microfluidic technologies is reported with blade coating to enable the controlled formation of compositional lateral gradients in solution. Subsequently, the transformation of liquid‐based compositional gradients into solid‐state thin films using this method is demonstrated. To demonstrate efficacy of the approach, microfluidic‐assisted blade coating is used to optimize blending ratios in organic solar cells. Importantly, this novel technology can be easily extended to other solution processable systems that require the formation of solid‐state compositional lateral gradients.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Coercivity Modulation in Fe-Cu Pseudo-Ordered Porous Thin Films Controlled by an Applied Voltage, A Sustainable, Energy-Efficient Approach to Magnetoelectrically Driven Materials

  • Dislaki, Evangelia|||0000-0002-3360-1588
  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Campoy-Quiles, Mariano|||0000-0002-8911-640X
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Fe-Cu films with pseudo-ordered, hierarchical porosity are prepared by a simple, two-step procedure that combines colloidal templating (using sub-micrometer-sized polystyrene spheres) with electrodeposition. The porosity degree of these films, estimated by ellipsometry measurements, is as high as 65%. The resulting magnetic properties can be controlled at room temperature using an applied electric field generated through an electric double layer in an anhydrous electrolyte. This material shows a remarkable 25% voltage-driven coercivity reduction upon application of negative voltages, with excellent reversibility when a positive voltage is applied, and a short recovery time. The pronounced reduction of coercivity is mainly ascribed to electrostatic charge accumulation at the surface of the porous alloy, which occurs over a large fraction of the electrodeposited material due to its high surface-area-to-volume ratio. The emergence of a hierarchical porosity is found to be crucial because it promotes the infiltration of the electrolyte into the structure of the film. The observed effects make this material a promising candidate to boost energy efficiency in magnetoelectrically actuated devices.