Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publication Artículo científico (JournalArticle)

Biomimetic Synthesis of Sub-20 nm Covalent Organic Frameworks in Water

  • Franco, Carlos
  • Rodríguez-San-Miguel, David
  • Sorrenti, Alessandro
  • Sevim, Semih
  • Pons, Ramon
  • Platero Prats, Ana Eva
  • Parlovic, Marko
  • Szilágyi, Istvan
  • Ruiz Gonzalez, M. Luisa
  • González-Calbet, José M.
  • Bochicchio, Davide
  • Pesce, Luca
  • Pavan, Giovanni M.
  • Imaz, Inhar
  • Cano-Sarabia, Mary
  • Maspoch, Daniel
  • Pané, Salvador
  • Mello, Andrew J. de
  • Zamora Abanades, Félix Juan
  • Puigmartí-Luis, Josep
This document is the Accepted Manuscript version of a Published Work that appeared in final form in Journal of the American Chemical Society, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://doi.org/10.1021/jacs.9b12389, Covalent organic frameworks (COFs) are commonly synthesized under harsh conditions yielding unprocessable powders. Control in their crystallization process and growth has been limited to studies conducted in hazardous organic solvents. Herein, we report a one-pot synthetic method that yields stable aqueous colloidal solutions of sub-20 nm crystalline imine-based COF particles at room temperature and ambient pressure. Additionally, through the combination of experimental and computational studies, we investigated the mechanisms and forces underlying the formation of such imine-based COF colloids in water. Further, we show that our method can be used to process the colloidal solution into 2D and 3D COF shapes as well as to generate a COF ink that can be directly printed onto surfaces. These findings should open new vistas in COF chemistry, enabling new application areas, This work was supported by the European Union (ERC-2015-STG microCrysFact 677020), the Swiss National Science Foundation (Project No. 200021_181988), ETH Zürich and Ministry of Science, Innovation and Universities MICINN (MAT2016-77608-C3-1P). R.P. acknowledges the Spanish MINECO (Grant No. CTQ2017—88948-P). A.E.P.P. acknowledges a TALENTO grant (2017-T1/IND5148) from Comunidad de Madrid. I.S. acknowledges the Ministry of Human Capacities of Hungary (20391-/2018/FEKUSTRAT). G.M.P. acknowledges the funding received by the Swiss National Science Foundation (SNSF grant number 200021_175735) and by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 818776 - DYNAPOL). D.M. acknowledges financial support from the European Union (ERC-Co 615954). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706). S.P. acknowledges funding from a Consolidator Grant from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant Agreement No. 771565). We acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of experimental facilities. Synchrotron X-ray diffraction experiments with COF-TAPB-BTCA were carried out at the beamline P02.1 PETRA III under the proposal I-20170717 EC. We acknowledge Jaume Caelles for SAXS/WAXS measurements performed at IQAC–CSIC.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Exploiting Reaction-Diffusion Conditions to Trigger Pathway Complexity in the Growth of a MOF

  • Calvo Galve, Néstor
  • Abrishamkar, Afshin
  • Sorrenti, Alessandro
  • Di Rienzo, Lorenzo
  • Satta, Mauro
  • D'Abramo, Marco
  • Coronado, Eugenio
  • De Mello, Andrew J.
  • Mínguez Espallargas, Guillem
  • Puigmartí-Luis, Josep
Coordinationpolymers(CPs),includingmetal-organicframeworks(MOFs),are crystallinematerialswithpromisingapplicationsin electronics,magnetism,catalysis,andgas storage/separation.However,the mechanismsandpath-waysunderlyingtheirformationremainlargelyundisclosed.Herein,we demonstratethatdiffusion-controlledmixingofreagentsat the veryearlystagesof the crystallizationprocess(i.e., within 40 ms),achievedby usingcontinuous-flowmicrofluidicdevices,can be usedto enablenovelcrystallizationpathwaysofaprototypicalspin-crossover MOFtowards itsthermodynamicproduct.In particular,twodistinctandunprecedentednucleation-growth pathwayswere experimen-tallyobservedwhencrystallizationwas triggeredundermicro-fluidicmixing.Full-atommoleculardynamicssimulationsalsoconfirmthe occurrenceof thesetwo distinctpathwaysduringcrystalgrowth.In sharpcontrast,acrystallizationby particleattachmentwas observedunderbulk(turbulent)mixing.Theseunprecedentedresultsprovideasoundbasisfor understandingthe growth of CPsand openup newavenuesfor the engineer-ing of porousmaterialsby usingout-of-equilibriumconditions
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Pathway selection as a tool for crystal defect engineering: A case study with a functional coordination polymer

  • Abrishamkar, Afshin
  • Suárez-García, Salvio
  • Sevim, Semih
  • Sorrenti, Alessandro
  • Pons Pons, Ramon
  • Liu, Shi-Xia
  • Decurtins, Silvio
  • Aromí Bedmar, Guillem
  • Aguilà Avilés, David
  • Pané, Salvador
  • deMelloa, Andrew J.
  • Rotarug, Aurelian
  • Ruiz-Molina, Daniel
  • Puigmartí-Luis, Josep
New synthetic routes capable of achieving defect engineering of functional crystals through well- controlled pathway selection will spark new breakthroughs and advances towards unprecedented and unique functional materials and devices. In nature, the interplay of chemical reactions with the diffusion of reagents in space and time is already used to favor such pathway selection and trigger the formation of materials with bespoke properties and functions, even when the material composition is preserved. Following this approach, herein we show that a controlled interplay of a coordination reaction with mass transport (i.e. the diffusion of reagents) is essential to favor the generation of charge imbalance defects (i.e. protonation defects) in a final crystal structure (thermodynamic product). We show that this syn- thetic pathway is achieved with the isolation of a kinetic product (i.e. a metastable state), which can be only accomplished when a controlled interplay of the reaction with mass transport is satisfied. Account- ing for the relevance of controlling, tuning and understanding structure-properties correlations, we have studied the spin transition evolution of a well-defined spin-crossover complex as a model system.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Microfluidic‐assisted blade coating of compositional libraries for combinatorial applications: the case of organic photovoltaics

  • Rodríguez Martínez, Xabier
  • Sevim, Semih
  • Xu, Xiaofeng
  • Franco, Carlos
  • Pamies-Puig, Paula
  • Córcoles Guija, Laura
  • Rodríguez Trujillo, Romén
  • Campo, Francisco Javier del
  • Rodríguez San Miguel, David
  • deMello, Andrew J.
  • Pané, Salvador
  • Amabilino, David B.
  • Inganäs, Olle
  • Puigmartí-Luis, Josep
  • Campoy Quiles, Mariano
Microfluidic technologies are highly adept at generating controllable compositional gradients in fluids, a feature that has accelerated the understanding of the importance of chemical gradients in biological processes. That said, the development of versatile methods to generate controllable compositional gradients in the solid‐state has been far more elusive. The ability to produce such gradients would provide access to extensive compositional libraries, thus enabling the high‐throughput exploration of the parametric landscape of functional solids and devices in a resource‐, time‐, and cost‐efficient manner. Herein, the synergic integration of microfluidic technologies is reported with blade coating to enable the controlled formation of compositional lateral gradients in solution. Subsequently, the transformation of liquid‐based compositional gradients into solid‐state thin films using this method is demonstrated. To demonstrate efficacy of the approach, microfluidic‐assisted blade coating is used to optimize blending ratios in organic solar cells. Importantly, this novel technology can be easily extended to other solution processable systems that require the formation of solid‐state compositional lateral gradients.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis of graphene-based photocatalysts for water splitting by laser-induced doping with ionic liquids

  • Pérez del Pino, Ángel
  • González Campo, Arántzazu
  • Giraldo, Sandra
  • Peral, José
  • Gyorgy, Eniko
  • Logofatu, Constantin
  • deMello, Andrew J.
  • Puigmartí Luis, Josep
The synthesis of metal-free graphene-based photocatalysts has received great attention recently due to their expected contributions to the development of solar-based hydrogen generation via water-splitting in a low cost and ecological manner. In this work, a new method for the generation of nitrogen-doped graphene-based powder employing an alternative solution to commonly used toxic and hazardous organic solvents is presented. The procedure involves ultraviolet pulsed laser irradiation of graphene oxide (GO) flakes dispersed in 1-butyl-3-methylimidazolium [bmim]-based ionic liquids using both chloride and acetate anions. The structural and compositional analysis using transmission electron microscopy, X-ray photoelectron and infrared spectroscopy indicate that the irradiated GO becomes partially reduced and doped with graphitic, pyrrolic and pyridinic nitrogen species. Interestingly, the relative content of the nitrogen functionalities is controlled by the anion in the ionic liquid and its concentration, with the obtained graphene-based powders showing higher photocatalytic activity than GO. Furthermore, a remarkable synergistic effect is observed for GO-[bmim]-acetate powder (acting as co-catalyst) in combination with anatase TiO2 nanoparticles. The presented method opens new research avenues for the cost-effective mass production of graphene-based photocatalysts for water splitting applications., The authors thank the financial support of the Spanish Ministry of Economy, Industry and Competitiveness under the projects ENE2014-56109-C3-3-R and HIDROPILSOL (CTQ2013-47103-R), in addition to the MAT2016-77852-C2-1-R (AEI/FEDER, UE). JPL acknowledges funding from the Swiss National Science Foundation (the project no. 200021_160174) and the EU (ERC-2015-STG microCrysFact 677020). SG thanks to MINECO for a FPI predoctoral grant and the project TEC2014-51940-C2-2 (EU ERDF, FEDER). ICMAB acknowledges financial support from the Spanish Ministry of Economy, Industry and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015- 0496). The authors also thank Dr. Nuria Aliaga and Ms.Wenjie Qian for their assistance in centrifugation and separation processes., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mineralization-Inspired Synthesis of Magnetic Zeolitic Imidazole Framework Composites

  • Terzopoulou, Anastasia
  • Hoop, Marcus
  • Chen, Xiang-Zhong
  • Hirt, A. M.
  • Charilaou, Michalis
  • Shen, Yang
  • Mushtaq, Fajer
  • Pérez del Pino, Ángel
  • Logofatu, Constantin
  • Simonelli, Laura
  • Mello, Andrew J. de
  • Doonan, Christian J.
  • Sort, Jordi
  • Nelson, Bradley J.
  • Pané, Salvador
  • Puigmartí Luis, Josep
Metal–organic frameworks (MOFs) capable of mobility and manipulation are attractive materials for potential applications in targeted drug delivery, catalysis, and small‐scale machines. One way of rendering MOFs navigable is incorporating magnetically responsive nanostructures, which usually involve at least two preparation steps: the growth of the magnetic nanomaterial and its incorporation during the synthesis of the MOF crystals. Now, by using optimal combinations of salts and ligands, zeolitic imidazolate framework composite structures with ferrimagnetic behavior can be readily obtained via a one‐step synthetic procedure, that is, without the incorporation of extrinsic magnetic components. The ferrimagnetism of the composite originates from binary oxides of iron and transition metals such as cobalt. This approach exhibits similarities to the natural mineralization of iron oxide species, as is observed in ores and in biomineralization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Biomimetic Synthesis of Sub-20 nm Covalent Organic Frameworks in Water

  • Franco, Carlos
  • Rodríguez-San-Miguel, David
  • Alessandro Sorrenti
  • Sorrenti, Alessandro
  • Sevim, Semih
  • Pons Pons, Ramon
  • Platero-Prats, Ana E.
  • Pavlovic, Marko
  • Szilágyi, Istvan
  • González Calbet, José M.
  • Ruiz Gonzalez, M. Luisa
  • Bochicchio, Davide
  • Pesce, Luca
  • Pavan, Giovanni M.
  • Imaz, Inhar
  • Cano-Sarabia, Mary
  • Maspoch, Daniel
  • Pané, Salvador
  • de Mello, Andrew J.
  • Zamora, Felix
  • Puigmartí-Luis, Josep
Covalent organic frameworks (COFs) are commonly synthesized under harsh conditions yielding unprocessable powders. Control in their crystallization process and growth has been limited to studies conducted in hazardous organic solvents. Herein, we report a one-pot synthetic method that yields stable aqueous colloidal solutions of sub-20 nm crystalline imine-based COF particles at room temperature and ambient pressure. Additionally, through the combination of experimental and computational studies, we investigated the mechanisms and forces underlying the formation of such imine-based COF colloids in water. Further, we show that our method can be used to process the colloidal solution into 2D and 3D COF shapes as well as to generate a COF ink that can be directly printed onto surfaces. These findings should open new vistas in COF chemistry, enabling new application areas., This work was supported by the European Union (ERC-2015-STG microCrysFact 677020), the Swiss National Science Foundation (Project No. 200021_181988), ETH Zürich and Ministry of Science, Innovation and Universities MICINN (MAT2016-77608-C3-1P). R.P. acknowledges the Spanish MINECO (Grant No. CTQ2017—88948-P). A.E.P.P. acknowledges a TALENTO grant (2017-T1/IND5148) from Comunidad de Madrid. I.S. acknowledges the Ministry of Human Capacities of Hungary (20391-/2018/FEKUSTRAT). G.M.P. acknowledges the funding received by the Swiss National Science Foundation (SNSF grant number 200021_175735) and by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 818776 - DYNAPOL). D.M. acknowledges financial support from the European Union (ERC-Co 615954). ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706). S.P. acknowledges funding from a Consolidator Grant from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant Agreement No. 771565). We acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of experimental facilities. Synchrotron X-ray diffraction experiments with COF-TAPB-BTCA were carried out at the beamline P02.1 PETRA III under the proposal I-20170717 EC. We acknowledge Jaume Caelles for SAXS/WAXS measurements performed at IQAC–CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pathway selection as a tool for crystal defect engineering: A case study with a functional coordination polymer

  • Abrishamkar, Afshin
  • Suárez-García, Salvio
  • Sevim, Semih
  • Sorrenti, Alessandro
  • Pons Pons, Ramon
  • Liu, Shi-Xia
  • Decurtins, Silvio
  • Aromí, Guillem
  • Aguilà, David
  • Pané, Salvador
  • deMello, Andrew J.
  • Rotaru, Aurelian
  • Ruiz-Molina, Daniel
  • Puigmartí-Luis, Josep
New synthetic routes capable of achieving defect engineering of functional crystals through well-controlled pathway selection will spark new breakthroughs and advances towards unprecedented and unique functional materials and devices. In nature, the interplay of chemical reactions with the diffusion of reagents in space and time is already used to favor such pathway selection and trigger the formation of materials with bespoke properties and functions, even when the material composition is preserved. Following this approach, herein we show that a controlled interplay of a coordination reaction with mass transport (i.e. the diffusion of reagents) is essential to favor the generation of charge imbalance defects (i.e. protonation defects) in a final crystal structure (thermodynamic product). We show that this synthetic pathway is achieved with the isolation of a kinetic product (i.e. a metastable state), which can be only accomplished when a controlled interplay of the reaction with mass transport is satisfied. Accounting for the relevance of controlling, tuning and understanding structure-properties correlations, we have studied the spin transition evolution of a well-defined spin-crossover complex as a model system., This work was partially supported by the European Union (ERC-2015-STG microCrysFact 677020), the Swiss National Science Foundation (Projects no. 200021_160174 and 200021 181988), MAT 2015–70615-R and MINECOCTQ2017-88948-P and RTI2018-098027-B-C21 from the Spanish Government funds, and by the European Regional Development Fund (ERDF). J.P.L. and S.P. acknowledge networking support by the COST Action CM1407 “e-minds”. The ICN2 is funded by the CERCA programme / Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). S.S-G. acknowledges the support from MINECO BES-2015-071492 grant. A.R. acknowledges the European Commission through the SPINSWITCH project (H2020-MSCA-RISE-2016, Grant Agreement No. 734322). Additionally, all authors acknowledge Jaume Caelles for SAXS/WAXS measurements performed at IQACCSIC. G.A. thanks support by the Generalitat de Catalunya through the ICREA Academia Prize 2018 Authors A. Abrishamkar, S. Suárez–García and S. Sevim contributed equally to this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microfluidic-Assisted Blade Coating of Compositional Libraries for Combinatorial Applications: The Case of Organic Photovoltaics

  • Rodríguez Martínez, Xabier
  • Sevim, Semih
  • Xu, Xiaofeng
  • Franco, Carlos
  • Pamies, Paula
  • Córcoles, Laura
  • Rodriguez Trujillo, Romen
  • Campo, Francisco Javier del
  • Rodríguez San Miguel, David
  • deMello, Andrew J.
  • Pané, Salvador
  • Amabilino, David B.
  • Inganäs, Olle
  • Puigmartí Luis, Josep
  • Campoy Quiles, Mariano
Microfluidic technologies are highly adept at generating controllable compositional gradients in fluids, a feature that has accelerated the understanding of the importance of chemical gradients in biological processes. That said, the development of versatile methods to generate controllable compositional gradients in the solid‐state has been far more elusive. The ability to produce such gradients would provide access to extensive compositional libraries, thus enabling the high‐throughput exploration of the parametric landscape of functional solids and devices in a resource‐, time‐, and cost‐efficient manner. Herein, the synergic integration of microfluidic technologies is reported with blade coating to enable the controlled formation of compositional lateral gradients in solution. Subsequently, the transformation of liquid‐based compositional gradients into solid‐state thin films using this method is demonstrated. To demonstrate efficacy of the approach, microfluidic‐assisted blade coating is used to optimize blending ratios in organic solar cells. Importantly, this novel technology can be easily extended to other solution processable systems that require the formation of solid‐state compositional lateral gradients., The authors would like to acknowledge financial support from the Spanish Ministry of Economy, Industry and Competitiveness through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV‐2015‐0496) and project reference PGC2018‐095411‐B‐I00 as well as the European Research Council (ERC) under grant agreement no. 648901. J.P.‐L. acknowledges the European Research Council Starting Grant microCrysFact (ERC‐2015‐STG No. 677020) and the Swiss National Science Foundation (200021_181988) and ETH Zürich. R. R.‐T. acknowledges the support from Generalitat de Catalunya and the COFUND programme of the Marie Curie Actions of the 7th R&D Framework Programme of the European Union (BP‐B 00256). X.R.‐M. acknowledges the departments of Physics, Chemistry and Geology of the Autonomous University of Barcelona (UAB) as coordinators of the PhD programme in Materials Science. X.R.‐M. and C.F. acknowledge Nicole Kleger‐Schai from ETH Zürich for her valuable help in using the rheometer. X.R.‐M. and M.C.‐Q. acknowledge Dr. Joan M. Cabot from the University of Tasmania for fruitful discussions on 3D printing. D.B.A. thanks the University of Nottingham Beacon Propulsion Futures., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Green synthesis of imine-based covalent organic frameworks in water

  • Martín-Illán, Jesús Á.
  • Rodríguez-San Miguel, David
  • Franco, Carlos
  • Imaz, Inhar
  • Maspoch, Daniel
  • Puigmartí Luis, Josep
  • Zamora, Félix
Dynamic covalent bonds have been advantageously used to direct the synthesis of crystalline porous covalent organic frameworks (COFs). Unlike the standard synthetic protocols that involve harsh conditions, this work provides a high-yield “one-pot” green synthesis of imine-based COFs in water. Additionally, this aqueous synthesis can be performed under microwave conditions, considerably reducing the reaction time., This work was supported by the EU (ERC-2015-STG microCrysFact 677020 and ERC-Co 615954), Swiss National Science Foundation (project no. 200021_160174 and 200021_181988), ETH Zürich, Catalan AGAUR (project 2017 SGR 238), and MICINN (“María de Maeztu” Programme for Units of Excellence in R&D CEX2018-000805-M, MAT2016-77608-C3-1P and RTI2018-095622-B-I00). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by Severo Ochoa program from MINECO (SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis of 2D Porous Crystalline Materials in Simulated Microgravity

  • Contreras-Pereda, Noemí
  • Rodríguez-San Miguel, David
  • Franco, Carlos
  • Sevim, Semih
  • Vale, João Pedro
  • Solano, Eduardo
  • Fong, Wye-Khay
  • Del Giudice, Alessandra
  • Galantini, Luciano
  • Pfattner, Raphael
  • Pané, Salvador
  • Sotto Mayor, Tiago
  • Ruiz Molina, Daniel
  • Puigmartí Luis, Josep
To date, crystallization studies conducted in space laboratories, which are prohibitively costly and unsuitable to most research laboratories, have shown the valuable effects of microgravity during crystal growth and morphogenesis. Herein, an easy and highly efficient method is shown to achieve space-like experimentation conditions on Earth employing custom-made microfluidic devices to fabricate 2D porous crystalline molecular frameworks. It is confirmed that experimentation under these simulated microgravity conditions has unprecedented effects on the orientation, compactness and crack-free generation of 2D porous crystalline molecular frameworks as well as in their integration and crystal morphogenesis. It is believed that this work will provide a new “playground” to chemists, physicists, and materials scientists that desire to process unprecedented 2D functional materials and devices., N.C.-P., D.R.-S.-M., C.F. contributed equally to this work. This work was supported by the European Research Council Starting Grant microCrysFact (ERC-2015-STG No. 677020), the Horizon 2020 FETOPEN project SPRINT (No. 801464), the Swiss National Science Foundation (project no. 200021_181988), grant MAT 2015-70615-R from the Spanish Government funds and by the European Regional Development Fund (ERDF). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). N.C.-P. acknowledges support from “laCaixa” Foundation (fellowship ID 100010434). The fellowship code is LCF/BQ/ES17/11600012. N.C.-P. also acknowledges the financial support of COST action MP1407. R.P. acknowledges support from the Marie Curie Cofund, Beatriu de Pinós Fellowship AGAUR 2017 BP 00064. The GIWAXS experiments were conducted on the NCD-SWEET beamline of the ALBA synchrotron, Spain and on the SAXS/WAXS beamline of the Australian Synchrotron, ANSTO, Australia. GIWAXS experiments of Ni3(HITP)2 and COF-TAPB-BTCA were performed at the NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. The authors acknowledge the support of the ANSTO, in providing the facilities for the GIWAXS experiments used for the characterization of COF-TAPB-BTCA in this work., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Exploiting Reaction-Diffusion Conditions to Trigger Pathway Complexity in the Growth of a MOF

  • Calvo Galve, Néstor
  • Abrishamkar, Afshin
  • Sorrenti, Alessandro
  • Di Rienzo, Lorenzo
  • Satta, Mauro
  • D'Abramo, Marco
  • Coronado, Eugenio
  • De Mello, Andrew J.
  • Mínguez Espallargas, Guillem
  • Puigmartí-Luis, Josep
Coordinationpolymers(CPs),includingmetal-organicframeworks(MOFs),are crystallinematerialswithpromisingapplicationsin electronics,magnetism,catalysis,andgas storage/separation.However,the mechanismsandpath-waysunderlyingtheirformationremainlargelyundisclosed.Herein,we demonstratethatdiffusion-controlledmixingofreagentsat the veryearlystagesof the crystallizationprocess(i.e., within 40 ms),achievedby usingcontinuous-flowmicrofluidicdevices,can be usedto enablenovelcrystallizationpathwaysofaprototypicalspin-crossover MOFtowards itsthermodynamicproduct.In particular,twodistinctandunprecedentednucleation-growth pathwayswere experimen-tallyobservedwhencrystallizationwas triggeredundermicro-fluidicmixing.Full-atommoleculardynamicssimulationsalsoconfirmthe occurrenceof thesetwo distinctpathwaysduringcrystalgrowth.In sharpcontrast,acrystallizationby particleattachmentwas observedunderbulk(turbulent)mixing.Theseunprecedentedresultsprovideasoundbasisfor understandingthe growth of CPsand openup newavenuesfor the engineer-ing of porousmaterialsby usingout-of-equilibriumconditions
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Microfluidic‐assisted blade coating of compositional libraries for combinatorial applications: the case of organic photovoltaics

  • Rodríguez Martínez, Xabier
  • Sevim, Semih
  • Xu, Xiaofeng
  • Franco, Carlos
  • Pamies-Puig, Paula
  • Córcoles Guija, Laura
  • Rodríguez Trujillo, Romén
  • Campo, Francisco Javier del
  • Rodríguez San Miguel, David
  • deMello, Andrew J.
  • Pané, Salvador
  • Amabilino, David B.
  • Inganäs, Olle
  • Puigmartí-Luis, Josep
  • Campoy Quiles, Mariano
Microfluidic technologies are highly adept at generating controllable compositional gradients in fluids, a feature that has accelerated the understanding of the importance of chemical gradients in biological processes. That said, the development of versatile methods to generate controllable compositional gradients in the solid‐state has been far more elusive. The ability to produce such gradients would provide access to extensive compositional libraries, thus enabling the high‐throughput exploration of the parametric landscape of functional solids and devices in a resource‐, time‐, and cost‐efficient manner. Herein, the synergic integration of microfluidic technologies is reported with blade coating to enable the controlled formation of compositional lateral gradients in solution. Subsequently, the transformation of liquid‐based compositional gradients into solid‐state thin films using this method is demonstrated. To demonstrate efficacy of the approach, microfluidic‐assisted blade coating is used to optimize blending ratios in organic solar cells. Importantly, this novel technology can be easily extended to other solution processable systems that require the formation of solid‐state compositional lateral gradients.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Pathway selection as a tool for crystal defect engineering: A case study with a functional coordination polymer

  • Abrishamkar, Afshin
  • Suárez-García, Salvio
  • Sevim, Semih
  • Sorrenti, Alessandro
  • Pons Pons, Ramon
  • Liu, Shi-Xia
  • Decurtins, Silvio
  • Aromí Bedmar, Guillem
  • Aguilà Avilés, David
  • Pané, Salvador
  • deMelloa, Andrew J.
  • Rotarug, Aurelian
  • Ruiz-Molina, Daniel
  • Puigmartí-Luis, Josep
New synthetic routes capable of achieving defect engineering of functional crystals through well- controlled pathway selection will spark new breakthroughs and advances towards unprecedented and unique functional materials and devices. In nature, the interplay of chemical reactions with the diffusion of reagents in space and time is already used to favor such pathway selection and trigger the formation of materials with bespoke properties and functions, even when the material composition is preserved. Following this approach, herein we show that a controlled interplay of a coordination reaction with mass transport (i.e. the diffusion of reagents) is essential to favor the generation of charge imbalance defects (i.e. protonation defects) in a final crystal structure (thermodynamic product). We show that this syn- thetic pathway is achieved with the isolation of a kinetic product (i.e. a metastable state), which can be only accomplished when a controlled interplay of the reaction with mass transport is satisfied. Account- ing for the relevance of controlling, tuning and understanding structure-properties correlations, we have studied the spin transition evolution of a well-defined spin-crossover complex as a model system.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Pathway selection as a tool for crystal defect engineering, a case study with a functional coordination polymer

  • Abrishamkar, Afshin|||0000-0001-5957-8067
  • Suárez García, Salvio|||0000-0002-4156-0579
  • Sevim, Semih
  • Sorrenti, Alessandro
  • Pons, Ramon|||0000-0003-4273-9084
  • Liu, Shi-Xia
  • Decurtins, Silvio
  • Aromi, Guillem|||0000-0002-0997-9484
  • Aguilà, David|||0000-0001-8707-7833
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • deMello, Andrew J.
  • Rotaru, Aurelian|||0000-0002-8782-7988
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
New synthetic routes capable of achieving defect engineering of functional crystals through well-controlled pathway selection will spark new breakthroughs and advances towards unprecedented and unique functional materials and devices. In nature, the interplay of chemical reactions with the diffusion of reagents in space and time is already used to favor such pathway selection and trigger the formation of materials with bespoke properties and functions, even when the material composition is preserved. Following this approach, herein we show that a controlled interplay of a coordination reaction with mass transport (i.e. the diffusion of reagents) is essential to favor the generation of charge imbalance defects (i.e. protonation defects) in a final crystal structure (thermodynamic product). We show that this synthetic pathway is achieved with the isolation of a kinetic product (i.e. a metastable state), which can be only accomplished when a controlled interplay of the reaction with mass transport is satisfied. Accounting for the relevance of controlling, tuning and understanding structure-properties correlations, we have studied the spin transition evolution of a well-defined spin-crossover complex as a model system.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Green synthesis of imine-based covalent organic frameworks in water

  • Martín-Illán, Jesús A.
  • Rodríguez-San-Miguel, David|||0000-0002-1476-2175
  • Franco, Carlos|||0000-0003-3385-2851
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
  • Zamora, Félix|||0000-0001-7529-5120
Dynamic covalent bonds have been advantageously used to direct the synthesis of crystalline porous covalent organic frameworks (COFs). Unlike the standard synthetic protocols that involve harsh conditions, this work provides a high-yield "one-pot"green synthesis of imine-based COFs in water. Additionally, this aqueous synthesis can be performed under microwave conditions, considerably reducing the reaction time.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Biomimetic synthesis of sub-20 nm covalent organic frameworks in water

  • Franco, Carlos|||0000-0003-3385-2851
  • Rodríguez-San-Miguel, David|||0000-0002-1476-2175
  • Sorrenti, Alessandro
  • Sevim, Semih
  • Pons, Ramon|||0000-0003-4273-9084
  • Platero-Prats, Ana Eva|||0000-0002-2248-2739
  • Pavlovic, Marko
  • Szilágyi, Istvan
  • Ruiz Gonzalez, M. Luisa
  • González-Calbet, José M.
  • Bochicchio, Davide|||0000-0002-3682-9086
  • Pesce, Luca
  • Pavan, Giovanni M.
  • Imaz, Inhar|||0000-0002-0278-1141
  • Cano-Sarabia, Mary|||0000-0003-4254-8157
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • De Mello, Andrew J.
  • Zamora, Félix|||0000-0001-7529-5120
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
Covalent organic frameworks (COFs) are commonly synthesized under harsh conditions yielding unprocessable powders. Control in their crystallization process and growth has been limited to studies conducted in hazardous organic solvents. Herein, we report a one-pot synthetic method that yields stable aqueous colloidal solutions of sub-20 nm crystalline imine-based COF particles at room temperature and ambient pressure. Additionally, through the combination of experimental and computational studies, we investigated the mechanisms and forces underlying the formation of such imine-based COF colloids in water. Further, we show that our method can be used to process the colloidal solution into 2D and 3D COF shapes as well as to generate a COF ink that can be directly printed onto surfaces. These findings should open new vistas in COF chemistry, enabling new application areas.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Synthesis of 2D porous crystalline materials in simulated microgravity

  • Contreras Pereda, Noemí|||0000-0002-8164-3977
  • Rodríguez-San-Miguel, David|||0000-0002-1476-2175
  • Franco, Carlos|||0000-0003-3385-2851
  • Sevim, Semih
  • Vale, Joao Pedro
  • Solano, Eduardo|||0000-0002-2348-2271
  • Fong, Wye-Khay
  • Del Giudice, Alessandra
  • Galantini, Luciano|||0000-0001-5484-2658
  • Pfattner, Raphael|||0000-0002-7232-1845
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sotto Mayor, Tiago
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
To date, crystallization studies conducted in space laboratories, which are prohibitively costly and unsuitable to most research laboratories, have shown the valuable effects of microgravity during crystal growth and morphogenesis. Herein, an easy and highly efficient method is shown to achieve space-like experimentation conditions on Earth employing custom-made microfluidic devices to fabricate 2D porous crystalline molecular frameworks. It is confirmed that experimentation under these simulated microgravity conditions has unprecedented effects on the orientation, compactness and crack-free generation of 2D porous crystalline molecular frameworks as well as in their integration and crystal morphogenesis. It is believed that this work will provide a new "playground" to chemists, physicists, and materials scientists that desire to process unprecedented 2D functional materials and devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Biodegradable small-scale swimmers for biomedical applications

  • Llacer-Wintle, Joaquin|||0000-0002-2504-7548
  • Rivas-Dapena, Antón
  • Chen, Xiangzhong|||0000-0002-2294-7487
  • Pellicer, Eva|||0000-0002-8901-0998
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
Most forms of biomatter are ephemeral, which means they transform or deteriorate after a certain time. From this perspective, implantable healthcare devices designed for temporary treatments should exhibit the ability to degrade and either blend in with healthy tissues, or be cleared from the body with minimal disruption after accomplishing their designated tasks. This topic is currently being investigated in the field of biomedical micro- and nanoswimmers. These tiny devices have the ability to move through fluids by converting physical or chemical energy into motion. Several architectures of these devices have been designed to mimic the motion strategies of nature's motile microorganisms and cells. Due to their motion abilities, these devices have been proposed as minimally invasive tools for precision healthcare applications. Hence, a natural progression in this field is to produce motile structures that can adopt, or even surpass, similar transient features as biological systems. The fate of small-scale swimmers after accomplishing their therapeutic mission is critical for the successful translation of small-scale swimmers' technologies into clinical applications. In this review, recent research efforts are summarized on the topic of biodegradable micro- and nanoswimmers for biomedical applications, with a focus on targeted therapeutic delivery.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Conductive properties of triphenylene MOFs and COFs

  • Contreras Pereda, Noemí|||0000-0002-8164-3977
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
Triphenylene (TP) based materials have experienced a great expansion in the latest years. TP molecules have interesting optoelectronic properties, arising from the aromatic core, which have been exploited in functional two-dimensional (2D) Metal-Organic Frameworks (MOFs) and Covalent Organic Frameworks (COFs) aside other organic polymers. In this review we summarize synthetic approaches of TP-based 2D MOFs and COFs emphasizing on the resulting morphology, crystalline domains and orientation, proven to have great impact on the properties and performance of these materials in functional devices. Specifically, we report a detailed description on the different TP-based 2D structures detailing the influence of the chemical and crystalline structure on the electronic properties, specially the in-plane and out-of-plane contribution to the electrical conductivity. Finally, we give also attention and present several examples of functional devices made out with these electronic materials with great impact in the literature as well as in future technological applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The magnetopyroelectric effect, heat-mediated magnetoelectricity in magnetic nanoparticle-ferroelectric polymer composites

  • Llacer-Wintle, Joaquin|||0000-0002-2504-7548
  • Renz, Jan
  • Hertle, Lukas
  • Veciana, Andrea|||0000-0003-0060-0949
  • von Arx, Denis
  • Wu, Jiang
  • Bruna, Pere|||0000-0002-7411-1278
  • Vukomanovic, Marija|||0000-0001-7034-0471
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Chen, Xiangzhong|||0000-0002-2294-7487
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
Magnetoelectricity enables a solid-state material to generate electricity under magnetic fields. Most magnetoelectric composites are developed through a strain-mediated route by coupling piezoelectric and magnetostrictive phases. However, the limited availability of high-performance magnetostrictive components has become a constraint for the development of novel magnetoelectric materials. Here, we demonstrate that nanostructured composites of magnetic and pyroelectric materials can generate electrical output, a phenomenon we refer to as the magnetopyroelectric (MPE) effect, which is analogous to the magnetoelectric effect in strain-mediated composite multiferroics. Our composite consists of magnetic iron oxide nanoparticles (IONPs) dispersed in a ferroelectric (and also pyroelectric) poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) matrix. Under a high-frequency low-magnitude alternating magnetic field, the IONPs generate heat through hysteresis loss, which stimulates the depolarization process of the pyroelectric polymer. This magnetopyroelectric approach creates a new opportunity to develop magnetoelectric materials for a wide range of applications.