Skip to main content

NUEVAS INTERCARAS OPTIMIZADAS PARA DISPOSITIVOS RESPONSIVOS BASADOS EN MOLECULAS

MAT2016-77852-C2-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 39
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spray-coated contacts from an organic charge transfer complex solution for organic field-effect transistors

  • Georgakopoulos, Stamatis
  • Pérez Rodríguez, Ana
  • Campos García, Antonio
  • Temiño, Inés
  • Galindo, Sergi
  • Barrena, Esther
  • Ocal, Carmen
  • Mas Torrent, Marta
We demonstrate the deposition of films of the conducting charge transfer complex TTF-TCNQ from solution by spray-coating. The benefit of spray-coating is the ability to process large volumes of solution, therefore allowing the utilisation of compounds with very low solubility. The sheet resistance in the TTF-TCNQ film is similar to that of the commonly used organic PEDOT:PSS electrodes, with the added benefit of room temperature deposition and no additional thermal treatments. Spray-coated TTF-TCNQ is used as source and drain electrodes for transistors based on the organic semiconductor C8-BTBT, achieving similar performances in terms of mobility and turn-on voltage than when conventional contacts of MoOx/Au are used, whilst exhibiting a slight improvement in the linearity of the output characteristics., This work was mainly funded by the ERCStG 2012-306826 e-GAMES project. The authors also thank the Networking Research Centre on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), the DGICT (Spain) with projects FANCY CTQ2016-80030-R and MAT2016-77852-C2-1-R (AEI/FEDER, UE) , Generalitat de Catalunya 2014-SGR-17, and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). A.C., I.T. and A. P.-R. are enrolled in the Materials Science PhD program of Universitat Autònoma de Barcelona and acknowledge FPU fellowship from the Ministry., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A molecular-scale portrait of domain imaging in organic surfaces

  • Pérez Rodríguez, Ana
  • Barrena, Esther
  • Fernández, Antón
  • Gnecco, Enrico
  • Ocal, Carmen
Progress in the general understanding of structure-property relationships in organic semiconductors requires experimental tools capable of imaging structural details, as molecular packing or domain attributes, featuring ultra-thin films. A rarely employed operation mode of scanning force microscopy, related to friction force microscopy (FFM) and known as transverse shear microscopy (TSM), has demonstrated the ability to reveal crystalline aspects linked to the surface symmetry of organic surfaces with nanometer resolution. In spite of those promising results, numerous questions remain about the physical origin of the TSM imaging mechanism. Taking as benchmark a PTCDI-C8 sub-monolayer, we demonstrate experimentally and theoretically that such mechanism is the same atomic scale stick-slip ruling FFM leading to the angular dependence of both signals. Lattice-resolved images acquired on top of differently oriented PTCDI-C8 molecular domains are crucial to permit azimuthal sampling, without the need of sample rotation. The simulations reveal that, though the surface crystallography is the direct cause of the FFM and TSM signals, the manifestation of anisotropy will largely depend on the amplitude of the surface potential corrugation as well as on temperature and the material itself. This work provides a novel nanoscale strategy for the quantitative analysis of organic thin films based on their nanotribological response., This work has been supported by the Spanish Government under projects MAT2013-47869-C4-1-P and MAT2016-77852-C2- 1-R and the Generalitat de Catalunya 2014 SGR501. We acknowledge the MINECO project MAT2015-68994-REDC and the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Real Space Demonstration of Induced Crystalline 3D Nanostructuration of Organic Layers

  • Paradinas, Markos
  • Pérez Rodríguez, Ana
  • Barrena, Esther
  • Ocal, Carmen
The controlled 3D nanostructuration of molecular layers of the semiconducting molecules C22H14 (pentacene) and N,N′-dioctyl-3,4,9,10-perylene tetracarboxylic diimide (PTCDI-C8) is addressed. A tip-assisted method using atomic force microscopy (AFM) is developed for removing part of the organic material and relocating it in up to six layer thick nanostructures. Moreover, unconventional molecular scale imaging combining diverse friction force microscopy modes reveals the stacking sequence of the piled layers. In particular, we unambiguously achieve epitaxial growth, an issue of fundamental importance in thin film strategies for the nanostructuration of more efficient organic nanodevices., We thank M. Aghamohammadi for her help with the film growth. This work has been supported by the Spanish Government under projects MAT2013-47869-C4-1-P and MAT2016-77852-C2-1-R (AEI/FEDER, UE) and the Generalitat de Catalunya 2014 SGR501. We acknowledge the MINEICO project MAT2015-68994-REDC and the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015- 0496). M.P. thanks the Spanish Government for financial support through BES-2008-003588 FPI and PTA2014-09788-I fellowships., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-situ scrutiny of the relationship between polymorphic phases and properties of self-assembled monolayers of a biphenyl based thiol

  • Paradinas, Markos
  • Munuera, C.
  • Buck, Manfred
  • Ocal, Carmen
Two polymorphic phases of ω-(4′-methylbiphenyl-4-yl) butane-1-thiol (BP4) molecules formed on Au(111) were investigated by multidimensional atomic force microscopy, combining conductivity measurements, electrostatic characterization, friction force mapping, and normal force spectroscopy. Based on the same molecular structure but differing in molecular order, packing density, and molecular tilt, the two phases serve as a test bench to establish the structure–property relationships in self-assembled monolayers (SAMs). From a detailed analysis of the charge transport and electrostatics, the contributions of geometrical and electronic effects to the tunneling are discussed., This work has been supported by the Spanish Government under projects MAT2013-47869-C4-1-P and MAT2016-77852- C2-1-R (AEI/FEDER, UE) and the Generalitat de Catalunya 2014 SGR501. We acknowledge the MINECO project MAT2015-68994-REDC and the “‘Severo Ochoa”’ Program for Centers of Excellence in R&D (SEV-2015-0496). M. Paradinas thanks the Spanish Government for financial support through BES-2008-003588 FPI and PTA2014-09788-I fellowships. C. Munuera acknowledges financial support from the “Ramon y Cajal ́ ” program RYC-2014-16626., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Decoding the Vertical Phase Separation and Its Impact on C8-BTBT/PS Transistor Properties

  • Pérez Rodríguez, Ana
  • Temiño, Inés
  • Ocal, Carmen
  • Mas Torrent, Marta
  • Barrena, Esther
Disentangling the details of the vertical distribution of the small semiconductor molecules blended with polystyrene (PS) and the contacts properties are issues of fundamental value for designing strategies to optimize small molecule/polymer blend organic transistors. These questions are addressed here for ultra-thin blends of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) and PS processed by a solution-shearing technique using three different blend composition ratios. We show that friction force microscopy (FFM) allows the determination of the lateral and vertical distribution of the two materials at the nanoscale. Our results demonstrate a three layer stratification of the blend: a film of C8-BTBT of few molecular layers with crystalline order sandwiched between a PS-rich layer at the bottom (a few nm thick) acting as passivating dielectric layer and a PS-rich skin layer on the top (~1nm) conferring stability to the devices. Kelvin probe force microscopy (KPFM) measurements performed in operating organic field-effect transistors (OFETs) reveal that the devices are strongly contact limited and suggest contact doping as route for device optimization. By excluding the effect of the contacts, field-effect mobility values in the channel as high as 10 cm2V-1s-1 are obtained. Our findings, obtained via a combination of FFM and KPFM, provide a satisfactory explanation of the different electrical performance of the OFETs as a function of the blend composition ratio and by doping the contacts., This work has been supported by the ERC StG 2012-306826 e-GAMES, Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), the Generalitat de Catalunya (2014-SGR-17 and 2014- SGR-501) and the Spanish Government under projects MAT2013-47869-C4-1-P, MAT2016-77852-C2-1-R and FANCY CTQ2016-80030-R. We acknowledge the MINECO project MAT2015-68994-REDC and the ‘‘Severo Ochoa’’ Program for Centers of Excellence in R&D (SEV-2015-0496). I.T. and A.P.-R. are enrolled in the Materials Science PhD program of Universitat Autònoma de Barcelona and I.T. acknowledges FPU fellowship from the Spanish Ministry., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chiral magnetic-nanobiofluids for rapid electrochemical screening of enantiomers at a magneto nanocomposite graphene-paste electrode

  • Muñoz Martín, José M.
  • González Campo, Arántzazu
  • Riba Moliner, Marta
  • Baeza, Mireia
  • Mas Torrent, Marta
The development of highly sensitive and selective enantiomeric platforms towards the rapid screening of active pharmaceutical ingredients (APIs) is nowadays a crucial challenge in several fields related to pharmacology, biomedicine, biotechnology and (bio)sensors. Herein, it is presented a novel, facile and generic methodology focused on exploiting the synergistically and electrocatalytic properties of chiral magnetic-nanobiofluids (mNBFs) with electrochemical enantiobiosensing at a magneto nanocomposite graphene paste electrode (mNC–GPE). The feasibility of this approach has been validated by chirally recognizing tryptophan (TRP) enantiomers as a proof-of-concept. For this aim, a specific chiral mNBF based on an aqueous dispersion of cobalt ferrite loaded with gold nanoparticles carrying a thiolated β-cyclodextrin (β–CD-SH/Au/CoFe2O4–NPs) has been synthesized and used towards the supramolecular discrimination of TRP enantiomers at an advanced graphene-paste transducer via cyclic voltammetry. This strategy, which is the first demonstration of applicability of chiral mNBFs for electrochemical enantiorecognition, opens up new approaches into enantio(bio)sensing., This work was funded by the ERC StG 2012–306826 e-GAMES. The authors also thank the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), the DGI (Spain) project FANCY CTQ2016-80030-R, the Generalitat de Catalunya (2014-SGR-17), the MAT2016-77852-C2-1-R (AEI/FEDER, UE) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chiral Organization and Charge Redistribution in Chloroaluminum Phthalocyanine on Au(111) Beyond the Monolayer

  • Matencio, Sonia
  • Palacios-Rivera, Rogger
  • Martínez, José I.
  • Ocal, Carmen
  • Barrena, Esther
The nontrivial effect of molecular dipoles on the surface work function of metals is explored for the unidirectional ordered arrays forming the first and second layers of chloroaluminum phthalocyanine on Au(111). This phthalocyanine is a nonplanar molecule with permanent electric dipole perpendicular to its molecular π-plane that can adopt two distinct configurations (Cl-up and Cl-down) when adsorbed on surfaces. The ordered array forming the first layer is known to consist of all Cl-up molecules, whereas the less-studied second layer is formed by molecules in the Cl-down configuration. The inverted orientation of the molecules in these two layers constitutes our benchmark system to investigate the influence of the dipole array orientation on the surface work function. The present study includes an experimental and theoretical approach that combines diverse imaging and spectroscopic scanning probe microscopies, in ultrahigh vacuum, with first-principles density functional theory-based atomistic simulations. Experiment and theory show a chiral organization transferred from the first layer to the growing film that is reflected in the electronic structure. We demonstrate that the obtained surface work function changes are smaller in magnitude than expected from a dipolar approximation because of charge rearrangement at and beyond the monolayer. We provide understanding of the crucial interplay between the interlayer and organic/metal interactions and quantify their effect on the electron density distribution and on the work function changes., This work has been supported by the Spanish Government under projects MAT2013-47869-C4-1-P, MAT2015-72848- EXP /AEI and MAT2016-77852-C2-1-R (AEI/FEDER, UE) and the Generalitat de Catalunya 2017 SGR 668. R. P-R. thanks financial support through BES-2014-067942. We acknowledge the specific agreement between ICMAB-CSIC and the Synchrotron Light Facility ALBA and the Spanish MINECO through the project MAT2015-68994-REDC and the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496). J.I.M. acknowledges the financial support by the Spanish MINECO via grant no. MAT2017-85089-C2-1- R and the “Ramon y Cajal ́ ” Program (grant no. RYC-2015- 17730), and the EU through the Innovation Program (grant 696656: Graphene Core1. Graphene-based disruptive technologies), as well as the use of computing resources from CTICSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis of graphene-based photocatalysts for water splitting by laser-induced doping with ionic liquids

  • Pérez del Pino, Ángel
  • González Campo, Arántzazu
  • Giraldo, Sandra
  • Peral, José
  • Gyorgy, Eniko
  • Logofatu, Constantin
  • deMello, Andrew J.
  • Puigmartí Luis, Josep
The synthesis of metal-free graphene-based photocatalysts has received great attention recently due to their expected contributions to the development of solar-based hydrogen generation via water-splitting in a low cost and ecological manner. In this work, a new method for the generation of nitrogen-doped graphene-based powder employing an alternative solution to commonly used toxic and hazardous organic solvents is presented. The procedure involves ultraviolet pulsed laser irradiation of graphene oxide (GO) flakes dispersed in 1-butyl-3-methylimidazolium [bmim]-based ionic liquids using both chloride and acetate anions. The structural and compositional analysis using transmission electron microscopy, X-ray photoelectron and infrared spectroscopy indicate that the irradiated GO becomes partially reduced and doped with graphitic, pyrrolic and pyridinic nitrogen species. Interestingly, the relative content of the nitrogen functionalities is controlled by the anion in the ionic liquid and its concentration, with the obtained graphene-based powders showing higher photocatalytic activity than GO. Furthermore, a remarkable synergistic effect is observed for GO-[bmim]-acetate powder (acting as co-catalyst) in combination with anatase TiO2 nanoparticles. The presented method opens new research avenues for the cost-effective mass production of graphene-based photocatalysts for water splitting applications., The authors thank the financial support of the Spanish Ministry of Economy, Industry and Competitiveness under the projects ENE2014-56109-C3-3-R and HIDROPILSOL (CTQ2013-47103-R), in addition to the MAT2016-77852-C2-1-R (AEI/FEDER, UE). JPL acknowledges funding from the Swiss National Science Foundation (the project no. 200021_160174) and the EU (ERC-2015-STG microCrysFact 677020). SG thanks to MINECO for a FPI predoctoral grant and the project TEC2014-51940-C2-2 (EU ERDF, FEDER). ICMAB acknowledges financial support from the Spanish Ministry of Economy, Industry and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015- 0496). The authors also thank Dr. Nuria Aliaga and Ms.Wenjie Qian for their assistance in centrifugation and separation processes., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enantiopure Supramolecular Motifs of Self-Assembled Diamine-Based Chiral Molecules on Cu(100)

  • Palacios-Rivera, Rogger
  • Barrena, Esther
  • Faraudo, Jordi
  • Gargiani, Pierluigi
  • Niño, Miguel Ángel
  • Arvanitis, Dimitri
  • Kowalik, Iwona
  • Miguel, Juan José de
  • Ocal, Carmen
The assembly of two diphenylethylenediamine enantiomers, separately deposited on Cu(100), is investigated from the first stages of two-dimensional crystallization to the nucleation and growth of the second layer. By means of scanning tunneling microscopy, we show that the chirality of enantiomers is expressed at different levels of molecular organization. Below the monolayer completion, a disordered phase coexists with domains of a square lattice aligned with the principal crystallographic directions of the substrate. The intrinsic chirality of the molecules is only manifested through specific features contained within the corresponding unit cell. For increasing coverage, this arrangement is accompanied by a second square structure, which appears to be clockwise or counterclockwise rotated with respect to the Cu(100) directions depending on the enantiomer. The nucleation of molecular chains on top of the aligned square structure gives rise to a second layer exhibiting a stripelike configuration with remarkable left- or right-handed helicity that mirrors that of the particular enantiomer. The nearly flat configuration of the first-layer molecules is confirmed by angular-dependent X-ray absorption experiments and supported by molecular dynamics simulations., This work has been supported by the Spanish Government under projects MAT2013-47869-C4, MAT2014-59315-R, MAT2015-72848-EXP/AEI, FIS2016-74893-P, and MAT2016-77852-C2-1-R (AEI/FEDER, UE) and the Generalitat de Catalunya 2017 SGR 668. We also appreciate the specific agreement between ICMAB-CSIC and the Synchrotron Light Facility ALBA and the Spanish MINECO through the project MAT2015-68994-REDC and the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496). The NEXAFS experiments were performed at BOREAS beamline at ALBA Synchrotron with the collaboration of ALBA staff. IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Program for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). R.P.-R. thanks the financial support through BES-2014-067942 (FPI fellowship). We acknowledge the CESGA Supercomputing Center for computational time at the Finisterrae Supercomputer and technical assistance., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of the Molecular Polarizability of SAMs on the Work Function Modification of Gold: Closed‐ versus Open‐Shell Donor–Acceptor SAMs

  • Díez Cabanes, Valentín
  • Morales, Dayana C.
  • Souto Salom, Manuel
  • Paradinas, Markos
  • Delchiaro, Francesca
  • Painelli, Anna
  • Ocal, Carmen
  • Cornil, David
  • Cornil, Jérôme
  • Veciana, Jaume
  • Ratera, Immaculada
Charge injection barriers at metal/organic interfaces can be tuned by modifying the work function of metallic electrodes using self‐assembled monolayers (SAMs) of polar molecules. An interesting example of polar molecules is offered by donor–acceptor (D–A) dyads based on ferrocene (Fc) as electron‐donor unit and either a polychlorotriphenylmethyl radical or a polychlorotriphenylmethane as electron‐acceptor units, connected by a π‐conjugated vinylene bridge. The D–A radical exhibits high chemical and thermal stability and presents different electronic, optical, and magnetic properties with respect to the closed‐shell form. The magnitude of the shift in the charge injection barriers for these two D–A systems is estimated by means of surface potential measurements performed by Kelvin probe force microscopy. The experimental data are compared with density functional theory calculations, which evidence the importance of the molecular dipole moments and polarizabilities to understand the experimental values. In order to achieve high work function shifts of metals upon SAM formation, the molecules forming the SAM have to exhibit both a high permanent dipole moment and a low polarizability along the direction normal to the substrate. In presence of polarizable molecules, the work function shifts can be enhanced by reducing the intermolecular interactions; by using mixed SAMs with active molecules embedded into a passive matrix., This work was financially supported by the EC through the Marie Curie project ITN iSwitch (Grant Agreement No. 642196). Computational resources were provided by the Consortium des Équipements de Calcul Intensif (CÉCI) funded by the Belgian National Fund for Scientific Research (F.R.S.‐FNRS) under Grant No. 2.5020.11. J.C. is an FNRS research director. The authors also acknowledge the financial support from Instituto de Salud Carlos III, through “Acciones CIBER.” The Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER‐BBN), an initiative funded by the VI National R&D&I Plan 2008e2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The authors also appreciate the financial support through projects: BE‐WELL (CTQ2013e40480‐R), FANCY (CTQ2016‐80030‐R), MOTHER (MAT2016‐80826‐R), and OPTIMODE (MAT2016‐77852‐C2‐1‐R), granted by DGI (Spain), GenCat (2017‐SGR‐918 and 2017‐SGR‐668), financed by DGR (Catalunya), and Severo Ochoa Program Grant No. SEV‐2015‐0496, financed by Mineico (Spain). M.P. thanks the Spanish Government for financial support through BES‐2008‐003588 FPI and PTA2014‐09788‐I fellowships., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Energy alignment and recombination in perovskite solar cells: weighted influence on the open circuit voltage

  • Gelmetti, Ilario
  • Montcada, Núria F.
  • Pérez Rodríguez, Ana
  • Barrena, Esther
  • Ocal, Carmen
  • García Benito, Inés
  • Molina Ontoria, Agustín
  • Martín, Nazario
  • Vidal Ferran, Anton
  • Palomares, Emilio
In this work, we assess the possible reasons for the differences observed in open circuit voltage (VOC) in mixed cation perovskite solar cells when comparing four different hole transport materials (HTMs), namely TAE‐1, TAE‐3, TAE‐4 and spiro‐OMeTAD. All these HTMs present close chemical and physical properties. Additionally to the evaluation of the HTM influence on recombination, we find that, upon deposition of the organic HTM on top of the perovskite, there is an important change in the energy levels position, and the impact on the device VOC is discussed. We consider that this experimental observation could be general for other organic HTMs and would justify the difficulties for finding molecules and materials that could improve the efficiency of perovskite solar cells overcoming the solar‐to‐energy conversion efficiency of solar cells made using spiro‐OMeTAD as holes selective contact., EP and AVF thank MINECO (projects CTQ2013-47183 and CTQ2017- 89814-P). NM thanks the European Research Council (ERC-320441- Chirallcarbon), the CAM (Y2018/NMT-4783QUIMTRONIC-CM) and the Spanish Ministry of Economy and Competitiveness MINECO (projects CTQ2014-52045-R, CTQ2015-71154-P, CTQ2016-80042-R, CTQ2017-83531-R and CTQ2016-81911-REDT). NM also thanks the Alexander von Humboldt Foundation and the Unidad de Excelencia Severo Ochoa SEV-2016-0686 is acknowledged. EP and AV are also grateful to ICIQ and ICREA for economical support. EB and CO thank the Generalitat de Catalunya 2017 SGR668 and 2017 SGR669, the MINEICO projects MAT2016-77852-C2-1-R (AEI/FEDER, UE), MAT2015-68994-REDC and the ‘‘Severo Ochoa’’ Program for Centers of Excellence in R&D (SEV-2015-0496). IG thanks Jesús Jiménez López for the fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Face dependent footprints of carpet-like graphene films grown on polycrystalline silicon carbide

  • Ramírez, Cristina
  • García, Eugenio
  • Barrena, Esther
  • De Pablos, Ángel
  • Belmonte, Manuel
  • Osendi, María Isabel
  • Miranzo López, Pilar
  • Ocal, Carmen
Continuous epitaxial graphene (EG) films have been grown on polished surfaces of dense polycrystalline SiC ceramics by heating in a Spark Plasma Sintering furnace (SPS). The confining of the sample into a graphite die and the use of a high pulsed dc current that triggers the joule heating of the system play a key role in the graphene formation by Si sublimation. The polycrystalline nature of the sample has allowed the comparison, through different local probe microscopies and micro-Raman spectroscopy, between EG films simultaneously grown on different SiC faces at exactly the same conditions, providing valuable information on their thickness, quality and stresses. Notably, whereas a graphene bilayer grows over Si-face grains, multilayer graphene (~10 layers) forms on C-faces. The observed nano-electronic and nano-mechanical heterogeneities of the surface, showing up as differences in charge state and strain release mechanisms, are found to arise from the dependence of the EG properties when developed on each grain orientation; the same applies in the case of the macro-mechanical scratch resistance. SPS demonstrates to be a reliable and flexible methodology to prepare continuous graphene films on SiC components with many possibilities for scaling-up at low cost., This work has been supported by the Spanish government under the projects MAT2015-67437-R (MICINN/FEDER, UE), MAT2016-77852-C2-1-R (AEI/FEDER, UE), RTI2018-095052-B-100 (AEI/FEDER, UE) and the ‘‘Severo Ochoa’’ Program for Centers of Excellence in R&D (SEV-2015-0496) and the Generalitat de Catalunya through grant 2017 SGR668. C. R. thanks the financial support by MICINN under contract IJCI-2017-34724 of “Juan de la Cierva” Program. The authors gratefully acknowledge A. del Campo for his help and advice in acquisition of Raman-AFM images., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Single-Molecule Transport of Fullerene-Based Curcuminoids

  • Dulić, Diana
  • Rates, Alfredo
  • Castro, Edison
  • Labra Muñoz, Jacqueline
  • Aravena, Daniel
  • Etcheverry Berríos, Álvaro
  • Riba López, Daniel
  • Ruiz, Eliseo
  • Aliaga Alcalde, Nuria
  • Soler, Mònica
  • Echegoyen, Luis
  • Zant, Herre S. J. van der
We present experimental and theoretical studies of single-molecule conductance through nonplanar fullerocurcuminoid molecular dyads in ambient conditions using the mechanically controllable break junction technique. We show that molecular dyads with bare fullerenes form configurations with conductance features related to different transport channels within the molecules, as identified with filtering and clustering methods. The primary channel corresponds to charge transport through the methylthio-terminated backbone. Additional low-conductance channels involve one backbone side and the fullerene. In fullerenes with four additional equatorial diethyl malonate groups attached to them, the latter transport pathway is blocked. Density functional theory calculations corroborate the experimental observations. In combination with nonequilibrium green functions, the conductance values of the fullerocurcuminoid backbones are found to be similar to those of a planar curcuminoid molecule without a fullerene attached. In the nonplanar fullerocurcuminoid systems, the highest-conductance peak occurs partly through space, compensating for the charge delocalization loss present in the curcuminoid system., Financial support from the European Commission (COST Action MOLSPIN CA15128 and EU RISE (DAFNEOX) project SEP-210165479) is gratefully acknowledged. The work at the University of Chile was supported by Fondecyt Regular Project 1181080 (D.D.), Fondecyt Regular Project 1161775 (M.S.), Fondecyt Regular Project 1170524 (D.A.), and Fondequip EQM140055 and EQM180009 (D.D). Powered@NLHPC: this research was partially supported by the supercomputing infrastructure of the NLHPC (ECM-02). E.R. acknowledges MICIIN for grant PGC2018-093863-B-C21 and the Maria de Maeztu Excellence grant MDM-2017-0767, for the computer resources, technical expertise, and assistance provided by the Barcelona Supercomputing Centre and CSUC and to the Generalitat de Catalunya for an ICREA Academia award and grant 2017SGR1289. H.S.J.v.d.Z. acknowledges support from the Dutch Science foundation (NWO). N.A.-A. thanks MEC for grant MAT2016-77852-C2-1-R, to the Generalitat de Catalunya for the grant 2017SGR1277, and the Severo Ochoa Program for Centers of Excellence in R&D (SEV-2015-0496). This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement 724981). L.E. thanks the US National Science Foundation (NSF) for generous support of this work under the CHE-1801317 program. The Robert A. Welch Foundation is also gratefully acknowledged for an endowed chair to L.E. (grant AH-0033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Supramolecular block copolymers incorporating chiral and achiral chromophores for the bottom-up assembly of nanomaterials

  • Riba Moliner, Marta
  • Oliveras González, Cristina
  • Amabilino, David B.
  • González Campo, Arántzazu
This paper is part of the 2019 Women in porphyrin science special issue., The coordination of the chiral metalloporphyrin ([5,10,15,20-[4-(R,R,R,R)-2-N-octadecylamidoethyloxiphenyl]porphyrin] zinc (II)) and an achiral homologue to an amphiphilic block copolymer of poly(styrene-b-4-vinyl pyridine) (PS-b-P4VP) have been studied in solution and as cast material. The resulting chiral dye-polymer hybrid material has been accomplished via axial coordination between the zinc (II) metal ion in the core of the porphyrin ring and the pyridyl units of the block-copolymer in a non-coordinative solvent. The supramolecular organization and possible chirality transfer to the hybrid material have been studied in solution by UV-visible absorption spectroscopy, fluorescence spectroscopy, Nuclear Magnetic Resonance and Circular Dichroism. The morphology of the chiral and achiral doped polymers has been studied in solid state by Transmission Electron Microscopy and Atomic Force Microscopy. We show that the nanostructures formed depend greatly upon the nature of the side-chains on the porphyrins, where a chiral group leads to a very homogeneous phase-separated material, perhaps indicating that chiral side groups are useful for the preparation of this type of supramolecular hybrid., We thank T. Parella (UAB) for its help in DOSY-NMR measurements, J. Oró (ICMAB) for its help in TEM imaging and M. Simón (ICMAB) for its help in AFM imaging. The work was supported by MINECO with the Project MAT2016-77852-C2-1-R (AEI/FEDER, UE) and MAT2013-47869-C4-2-P and Generalitat de Catalunya for the project 2017-SGR-1277. AGC acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496) and the Ministry of Science, Innovation and Universities for a Ramon y Cajal contract (RYC-2017-22910)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pores Dominate Ice Nucleation on Feldspars

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Carbon-paste nanocomposites as unconventional gate electrodes for electrolyte-gated organic field-effect transistors: electrical modulation and bio-sensing

  • Muñoz Martín, José M.
  • Leonardi, Francesca
  • Özmen, Tayfun
  • Riba Moliner, Marta
  • González Campo, Arántzazu
  • Baeza, Mireia
  • Mas Torrent, Marta
Nanocomposite carbon-paste electrodes (NC-CPEs) have been investigated for the first time in electrolyte-gated organic field-effect transistors (EGOFETs) as a replacement of conventional metal gate electrodes, using carbon nanotubes (CNTs) as a model carbon filler. Interestingly, the electrical properties of the resulting devices have been modulated by changing the loading percentage of CNTs within the insulating polymeric matrix. The potential of using such non-conventional gate electrodes for sensing purposes has also been evaluated by investigating, as a proof of concept, the formation of a supramolecular complex between a functionalized CNT-based NC-CPE containing β-cyclodextrin (β-CD) as a bio-recognition element and tryptophan (TRP). This approach, in synergism with the amplification function of an EGOFET, affords a shift in the threshold voltage (VTH) of the transistor, giving promising analytical results with detection limits at picomolar levels (1.0 ± 0.1 pM) as well as a linear response from 10−12 to 10−9 M. Accordingly, NC-CPEs have been demonstrated to be a potential alternative to metal gate electrodes for the development of a new generation of highly sensitive carbon-based EGOFET bio-sensors., This work was funded by the ERC StG 2012-306826 e-GAMES. The authors also thank the DGI (Spain) project FANCY CTQ2016-80030-R, MAT2016-77852-C2-1-R (AEI/FEDER, UE), the Generalitat de Catalunya (2017-SGR-918 and 2017-SGR-1277), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496). Dr J. Muñoz and Dr F. Leonardi gratefully thank the “Juan de la Cierva” programme. Dr A. González-Campo thanks the Ministry of Science, Innovation and Universities for the Ramon y Cajal contract (RYC-2017-22910). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Slow-spin relaxation of a low-spin S = 1/2 FeIII carborane complex

  • Buades, Ana B.
  • Sánchez Arderiu, Víctor
  • Maxwell, Lindley
  • Amoza, Martín
  • Choquesillo-Lazarte, Duane
  • Aliaga Alcalde, Nuria
  • Viñas, Clara
  • Teixidor, Francesc
  • Ruiz, Eliseo
In this communication, we report the first evidence of slow-spin relaxation of a low-spin FeIII carborane complex. Iron S = 1/2 complexes showing such behaviour are particularly appealing as qubit candidates because they fulfil some of the main requirements to reach long decoherence times, such as moderate magnetic anisotropy, small spin, metal element mainly with zero-nuclear spin and furthermore, large versatility to introduce chemical modifications., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Water adsorption, dissociation and oxidation on SrTiO3 and ferroelectric surfaces revealed by ambient pressure X-ray photoelectron spectroscopy

  • Domingo, Neus
  • Pach, Elzbieta
  • Cordero-Edwards, Kumara
  • Pérez Dieste, Virginia
  • Escudero, Carlos
  • Verdaguer, Albert
Water dissociation on oxides is of great interest because its fundamental aspects are still not well understood and it has implications in many processes, from ferroelectric polarization screening phenomena to surface catalysis and surface chemistry on oxides. In situ water dissociation and redox processes on metal oxide perovskites which easily expose TiO2-terminated surfaces, such as SrTiO3, BaTiO3 or Pb(Zr,Ti)O3, are studied by ambient pressure XPS, as a function of water vapour pressure. From the analysis of the O1s spectrum, we determine the presence of different types of oxygen based species, from hydroxyl groups, either bound to Ti4+ and metal sites or lattice oxygen, to different peroxide compounds, and propose a model for the adsorbate layer composition, valid for environmental conditions. From the XPS analysis, we describe the existing surface redox reactions for metal oxide perovskites, occurring at different water vapour pressures. Among them, peroxide species resulting from surface oxidative reactions are correlated with the presence of Ti4+ ions, which are observed to specifically promote surface oxidation and water dissociation as compared to other metals. Finally, surface peroxidation is enhanced by X-ray beam irradiation, leading to a higher coverage of peroxide species after beam overexposure and by ferroelectric polarization, demonstrating the enhancement of the reactivity of the surfaces of ferroelectric materials due to the effect of internal electric fields., The authors would like to acknowledge Prof. P. Paruch of Université de Genève, who kindly provided PZT thin film samples and Prof. B. Noheda for kindly providing BFO thin films. Financial support was provided by the Spanish Ministerio de Economía y Competitividad (MINECO) under projects FIS2015-73932-JIN and MAT2016-77852-C2-1-R (AEI/FEDER, UE). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706), and ICMAB acknowledges support from the Severo Ochoa Program of MINECO (Grant No. SEV-2015-0496). This work was partially funded by 2017-SGR-579 and 2017-SGR-668 projects from the Generalitat de Catalunya., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface charged species and electrochemistry of ferroelectric thin films

  • Domingo, Neus
  • Gaponenko, Iaroslav
  • Cordero-Edwards, Kumara
  • Stucki, Nicolas
  • Pérez Dieste, Virginia
  • Escudero, Carlos
  • Pach, Elzbieta
  • Verdaguer, Albert
  • Paruch, Patrycja
The combination of scanning probe microscopy and ambient pressure X-ray photoelectron spectroscopy opens up new perspectives for the study of combined surface chemical, electrochemical and electromechanical properties at the nanoscale, providing both nanoscale resolution of physical information and the chemical sensitivity required to identify surface species and bulk ionic composition. In this work, we determine the nature and evolution over time of surface chemical species obtained after water-mediated redox reactions on Pb(Zr0.2,Ti0.8)O3 thin films with opposite as-grown polarization states. Starting with intrinsically different surface chemical composition on the oppositely polarized films (as a result of their ferroelectric-dominated interaction with environmental water), we identify the reversible and irreversible electrochemical reactions under an external electric field, distinguishing switching and charging events. We find that while reversible ionic displacements upon polarization switching dominate screening in the bulk of the sample, polarization dependent irreversible redox reactions determine surface chemical composition, which reveals itself as a characteristic fingerprint of the ferroelectric polarization switching history., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of Nanomorphology on Surface Doping of Organic Semiconductors: The Pentacene−C60F48 Interface

  • Silvestri, Francesco
  • Prieto, Mauricio J.
  • Babuji, Adara
  • Tănase, Liviu C.
  • Caldas, Lucas de Souza
  • Solomeshch, Olga
  • Schmidt, Thomas
  • Ocal, Carmen
  • Barrena, Esther
Establishing the rather complex correlation between the structure and the charge transfer in organic−organic heterostructures is of utmost importance for organic electronics and requires spatially resolved structural, chemical, and electronic details. Insight into this issue is provided here by combining atomic force microscopy, Kelvin probe force microscopy, photoemission electron microscopy, and low-energy electron microscopy for investigating a case study. We select the interface formed by pentacene (PEN), benchmark among the donor organic semiconductors, and a p-type dopant from the family of fluorinated fullerenes. As for Buckminsterfullerene (C60), the growth of its fluorinated derivative C60F48 is influenced by the thickness and crystallinity of the PEN buffer layer, but the behavior is markedly different. We provide a microscopic description of the C60F48/PEN interface formation and analyze the consequences in the electronic properties of the final heterostructure. For just one single layer of PEN, a laterally complete but noncompact C60F48/PEN interface is created, importantly affecting the surface work function. Nonetheless, from the very beginning of the second layer formation, the presence of epitaxial and nonepitaxial PEN domains dramatically influences the growth dynamics and extremely well packed two-dimensional C60F48 islands develop. Insightful elemental maps of the C60F48/PEN surface spatially resolve the nonuniform distribution of the dopant molecules, which leads to a heterogeneous work function landscape., This work has been supported by the Spanish government under the projects MAT2016-77852-C2-1-R (AEI/FEDER, UE) and the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496) and by the European Union’s Horizon 2020 Research and Innovation Program under grant Agreement No. 730872 and the Marie Skłodowska-Curie Grant Agreement No. 722651 (SEPOMO project). We also acknowledge the Generalitat de Catalunya grant 2017 SGR668. F.S. has been developing this work as part of his doctorate in Materials Science at the Universitat Autonoma de Barcelona (UAB). The SMART instrument was ̀ financially supported by the Federal German Ministry of Education and Research (BMBF) under the contract 05 KS4WWB/4, as well as by the Max-Planck Society. We thank the Helmholtz-Center Berlin for Materials and Energy (HZB) for the allocation of beamtime 192-08486-ST. L.d.S.C. is grateful for the funding through the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany′s Excellence StrategyEXC 2008390540038 (UniSysCat). O.S. acknowledges the support from the Israel Ministry of Science, the Center for Absorption in Science of the Ministry of Immigrant Absorption, the Committee for Planning and budgeting of the Council for Higher Education under the framework of the KAMEA Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Double Beneficial Role of Fluorinated Fullerene Dopants on Organic Thin-Film Transistors: Structural Stability and Improved Performance

  • Babuji, Adara
  • Temiño, Inés
  • Pérez Rodríguez, Ana
  • Solomeshch, Olga
  • Tessler, Nir
  • Vila, María
  • Li, Jinghai
  • Mas Torrent, Marta
  • Ocal, Carmen
  • Barrena, Esther
The present work assesses improved carrier injection in organic field-effect transistors by contact doping and provides fundamental insight into the multiple impacts that the dopant/semiconductor interface details have on the long-term and thermal stability of devices. We investigate donor [1]benzothieno[3,2-b]-[1]benzothiophene (BTBT) derivatives with one and two octyl side chains attached to the core, therefore constituting asymmetric (BTBT-C8) and symmetric (C8-BTBT-C8) molecules, respectively. Our results reveal that films formed out of the asymmetric BTBT-C8 expose the same alkyl-terminated surface as the C8-BTBT-C8 films do. In both cases, the consequence of depositing fluorinated fullerene (C60F48) as a molecular p-dopant is the formation of C60F48 crystalline islands decorating the step edges of the underlying semiconductor film surface. We demonstrate that local work function changes along with a peculiar nanomorphology lead to the double beneficial effect of lowering the contact resistance and providing long-term and enhanced thermal stability of the devices., This work has been supported by the Spanish Government under projects MAT2016-77852-C2-1-R (AEI/FEDER, UE), FANCY CTQ2016-80030-R, and “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496). We acknowledge the GC recognitions 2017-SGR668 and 2017- SGR918 and the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN). A.B. thanks the Spanish Government financial support through BES-2016-077519 FPI fellowship. This work has been carried out within the framework of the doctoral program (Ph.D.) of Material Science (Department of Physics) of the Universitat Autònoma de Barcelona (UAB). O.S. acknowledges the support of the Israel Ministry of Science, the Center for Absorption in Science of the Ministry of Immigrant Absorption, and the Committee for Planning and budgeting of the Council for Higher Education under the framework of the KAMEA Program. J.L. acknowledges the support of the Chinese Council for Ph.D. fellowship. We acknowledge The European Synchrotron Radiation Facility (ESRF) and CSIC for the provision of measurements using the BM25-SpLine beamline., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

π-Donor/π-acceptor interactions for the encapsulation of neurotransmitters on functionalized polysilicon-based microparticles

  • Giraldo, Sandra
  • Alea-Reyes, María E.
  • Limón, David
  • González, Asensio
  • Duch Llobera, Marta
  • Plaza, José Antonio
  • Ramos-López, David
  • Lapuente, Joaquín de
  • González Campo, Arántzazu
  • Pérez-García, Lluïsa
Bipyridinium salts, commonly known as viologens, are π-acceptor molecules that strongly interact with π-donor compounds, such as porphyrins or amino acids, leading their self-assembling. These properties have promoted us to functionalize polysilicon microparticles with bipyridinium salts for the encapsulation and release of π-donor compounds such as catecholamines and indolamines. In this work, the synthesis and characterization of four gemini-type amphiphilic bipyridinium salts (1·4PF6–4·4PF6), and their immobilization either non-covalently or covalently on polysilicon surfaces and microparticles have been achieved. More importantly, they act as hosts for the subsequent incorporation of π-donor neurotransmitters such as dopamine, serotonin, adrenaline or noradrenaline. Ultraviolet-visible absorption and fluorescence spectroscopies and high-performance liquid chromatography were used to detect the formation of the complex in solution. The immobilization of bipyridinium salts and neurotransmitter incorporation on polysilicon surfaces was corroborated by contact angle measurements. The reduction in the bipyridinium moiety and the subsequent release of the neurotransmitter was achieved using ascorbic acid, or Vitamin C, as a triggering agent. Quantification of neurotransmitter encapsulated and released from the microparticles was performed using high-performance liquid chromatography. The cytotoxicity and genotoxicity studies of the bipyridinium salt 1·4PF6, which was selected for the non-covalent functionalization of the microparticles, demonstrated its low toxicity in the mouse fibroblast cell line (3T3/NIH), the human liver carcinoma cell line (HepG2) and the human epithelial colorectal adenocarcinoma cell line (Caco-2)., This research was funded by EU ERDF (FEDER) funds and the Spanish Government grant TEC2017-85059-C3-1-1-R and -2-R and MAT2016-77852-C2-1-R (AEI/FEDER, UE). The project thanks the support from Generalitat de Catalunya (SGR-1277). S.G. thanks MINECO for a predoctoral grant (FPI). A.G.-C. acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV- 2015-0496) and the Ministry of Science and Innovation for a Ramon y Cajal contract (RYC-2017-22910)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface specificity and mechanistic pathway of defluorination of C60F48 on coinage metals

  • Palacios-Rivera, Rogger
  • Malaspina, David C.
  • Tessler, Nir
  • Solomeshch, Olga
  • Faraudo, Jordi
  • Barrena, Esther
  • Ocal, Carmen
We provide experimental and theoretical understanding on fundamental processes taking place at room temperature when a fluorinated fullerene dopant gets close to a metal surface. By employing scanning tunneling microscopy and photoelectron spectroscopies, we demonstrate that the on-surface integrity of C60F48 depends on the interaction with the particular metal it approaches. Whereas on Au(111) the molecule preserves its chemical structure, on more reactive surfaces such as Cu(111) and Ni(111), molecules interacting with the bare metal surface lose the halogen atoms and transform to C60. Though fluorine–metal bonding can be detected depending on the molecular surface density, no ordered fluorine structures are observed. We show the implications of the metal-dependent de-fluorination in the electronic structure of the molecules and the energy alignment at the molecule–metal interface. Molecular dynamics simulations with ReaxFF reactive force field corroborate the experimental facts and provide a detailed mechanistic picture of the surface-induced de-fluorination, which involves the rotation of the molecule on the surface. Outstandingly, a thermodynamic analysis indicates that the effect of the metal surface is lowering and diminishing the energy barrier for C–F cleave, demonstrating the catalytic role of the surface. The present study contributes to in-depth knowledge of the mechanisms that affect the degree of stability of chemical species on surfaces, which is essential to advance our understanding of the chemical reactivity of metals and their role in on-surface chemical reactions., This work has been supported by the Spanish Government under projects PID2019-110907GB-I00, MAT2016-77852-C2-1-R (AEI/FEDER, UE), RTI2018-096273-B-I00, the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496) and the Generalitat de Catalunya 2017-SGR668. R. P. R. has been developing this work as part of his doctorate in Materials Science at the Universitat Autònoma de Barcelona (UAB). D. C. M. is supported by the European Union's Horizon 2020 Research and Innovation Programme under Marie Sklodowska-Curie grant agreement No. 6655919. O. S. is grateful for the support by the Center for Absorption in Science of the Ministry of Immigrant Absorption and the Committee for Planning and Budgeting of the Council for Higher Education in Israel under the framework of the KAMEA Program. We thank CESGA Supercomputing center for technical support and computer time at the supercomputer Finisterrae II. We are indebted to G. Sauthier from the ICN2 Photoemission Spectroscopy Facility. We are grateful to M. Paradinas and A. Mugarza from ICN2 for providing the Ni(111) crystal., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhancing Long-Term Device Stability Using Thin Film Blends of Small Molecule Semiconductors and Insulating Polymers to Trap Surface-Induced Polymorphs

  • Salzillo, Tommaso
  • Campos García, Antonio
  • Babuji, Adara
  • Santiago, Raul
  • Bromley, Stefan T.
  • Ocal, Carmen
  • Barrena, Esther
  • Jouclas, Rémy
  • Ruzié, Christian
  • Schweicher, Guillaume
  • Geerts, Yves Henry
  • Mas Torrent, Marta
The lack of long‐term stability in thin films of organic semiconductors can often be caused by the low structural stability of metastable phases that are frequently formed upon deposition on a substrate surface. Here, thin films of 2,7‐dioctyloxy[1]benzothieno[3,2‐b]benzothiophene (C8O‐BTBT‐OC8) and blends of this material with polystyrene by solution shearing are fabricated. Both types of films exhibit the metastable surface‐induced herringbone phase (SIP) in all the tested coating conditions. The blended films reveal a higher device performance with a field‐effect mobility close to 1 cm2 V−1 s−1, a threshold voltage close to 0 V, and an on/off current ratio above 107. In situ lattice phonon Raman microscopy is used to study the stability of the SIP polymorph. It is found that films based on only C8O‐BTBT‐OC8 slowly evolve to the Bulk cofacial phase, significantly impacting device electrical performance. In contrast, the blended films stabilize the SIP phase, leading to devices that maintain a high performance over 1.5 years. This work demonstrates that blending small‐molecule organic semiconductors with insulating binding polymers can trap metastable polymorphs, which can lead to devices with both improved performance and long‐term stability., T.S. and A.C. contributed equally to this work. This work was funded by the Spanish Ministry projects (FANCY CTQ2016‐80030‐R, GENESIS PID2019‐111682RB‐I00, PID2019‐110907GB‐I00, MICIUN/FEDER RTI2018‐095460‐B‐I00 and MAT2016‐77852‐C2‐1‐R (AEI/FEDER, UE)) the Generalitat de Catalunya (2017‐SGR13, 2017‐SGR‐918 and 2017‐SGR668) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV‐2015‐0496) and “María de Maeztu” program for Spanish Structures of Excellence (MDM‐2017‐0767). The authors also thank the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska‐Curie grant agreement No 811284 (UHMob). They also acknowledge access to supercomputer resources as provided through grants from the Red Española de Supercomputación. T.S. acknowledges the H2020‐MSCA‐COFUND‐2014 Programme (P‐SPHERE, Grant agreement 665919). A.B. thanks the Spanish Government financial support through BES‐2016‐077519 FPI fellowship. This work was carried out within the framework of the doctoral program (Ph.D.) of Material Science (Department of Physics and Chemistry) of the Universitat Autonoma de Barcelona (UAB). Y.G. is thankful to the Belgian National Fund for Scientific Research (FNRS) for financial support through research projects BTBT no. 2.4565.11, Phasetrans no. T.0058.14, Pi‐Fast no T.0072.18, and 2D to 3D no. 30489208. Financial support from the French Community of Belgian (ARC no. 20061) is also acknowledged. G.S. acknowledges postdoctoral fellowship support from the FNRS. The authors acknowledge Dr. Gemma Rius and CNM‐IMB for the access to the Raman facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of the organic semiconductor side groups on the structural and electronic properties of their interface with dopants

  • Babuji, Adara
  • Silvestri, Francesco
  • Pithan, Linus
  • Richard, Audrey
  • Geerts, Yves Henry
  • Tessler, Nir
  • Solomeshch, Olga
  • Ocal, Carmen
  • Barrena, Esther
Two derivatives of [1]benzothieno[3,2-b][1]benzothiophene (BTBT), namely, 2,7-dioctyl-BTBT (C8-BTBT) and 2,7-diphenyl-BTBT (DPh-BTBT), belonging to one of the best performing organic semiconductor (OSC) families, have been employed to investigate the influence of the substitutional side groups on the properties of the interface created when they are in contact with dopant molecules. As a molecular p-dopant, the fluorinated fullerene C60F48 is used because of its adequate electronic levels and its bulky molecular structure. Despite the dissimilarity introduced by the OSC film termination, dopant thin films grown on top adopt the same (111)-oriented FCC crystalline structure in the two cases. However, the early stage distribution of the dopant on each OSC film surface is dramatically influenced by the group side, leading to distinct host–dopant interfacial morphologies that strongly affect the nanoscale local work function. In this context, Kelvin probe force microscopy and photoelectron emission spectroscopy provide a comprehensive picture of the interfacial electronic properties. The extent of charge transfer and energy level alignment between OSCs and dopant are debated in light of the differences in the ionization potential of the OSC in the films, the interface nanomorphology, and the electronic coupling with the substrate., This work has been funded by the Spanish Government through projects PID2019-110907GB-I00, MAT2016-77852-C2-1-R (AEI/FEDER, UE), and the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2019-000917-S). We thank the 2017-SGR668 recognition. A.B. thanks the Spanish Government financial support through BES-2016-077519 FPI fellowship. F.S. acknowledges the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 730872 and the Marie Skłodowska-Curie grant agreement no. 722651 (SEPOMO project). This work has been carried out within the framework of the doctoral program (PhD) of Material Science (Department of Physics) of the Universitat Autònoma de Barcelona (UAB). O.S. acknowledges the support of the Israel Ministry of Science, the Center for Absorption in Science of the Ministry of Immigrant Absorption, the Committee for Planning and budgeting of the Council for Higher Education under the framework of the KAMEA Program. Y.H.G. is thankful to the Belgian National Fund for Scientific Research (FNRS) for financial support through research projects BTBT no. 2.4565.11, Phasetrans no. T.0058.14, Pi-Fast no. T.0072.18, and 2Dto3D no. 30489208. Financial supports from the French Community of Belgian (ARC no. 20061) are also acknowledged. A.R. acknowledges doctoral fellowship support from the FRIA. We thank the European Synchrotron Radiation Facility (ESRF) for providing access to ID03 for the time of the experiment. We are indebted to G. Sauthier from the ICN2 Photoemission Spectroscopy Facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Single molecule magnets of cobalt and zinc homo- and heterometallic coordination polymers prepared by a one-step synthetic procedure

  • Portolés Gil, Núria
  • Gómez-Coca, Silvia
  • Vallcorba, Oriol
  • Marbán Calzón, Gregorio
  • Aliaga Alcalde, Nuria
  • López Periago, Ana M.
  • Ayllón, José A.
  • Domingo, Concepción
The synthesis of 1D cobalt and zinc monometallic and heterometallic coordination polymers (CPs) was carried out applying one-pot synthetic methods by using either supercritical carbon dioxide or ethanol as the solvent. A collection of four 1D CPs were thus obtained by the combination of a metal (or a mixture of metals) with the linker 1,4-bis(4-pyridylmethyl)benzene. The used metallic complexes were zinc and cobalt hexafluoroacetylacetonate, which can easily incorporate pyridine ligands in the coordination sphere of the metal centre. Independently of the used solvent, the precipitated phases involving Zn(II), i.e., homometallic CP of Zn(II) and bimetallic CP of Zn(II)/Co(II), were isostructural. Contrarily, homometallic CPs of Co(II) were precipitated as an isostructural phase of Zn(II) or with a different structure, depending on the used solvent. All the structures were resolved by XRD using synchrotron radiation. In addition, the magnetic properties of the new CPs involving Co(II) were studied. Remarkably, at low temperatures with the application of an external field, they acted as field-induced single molecule magnets., The research reported here was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades (grants CTQ2017-83632, PGC2018-093863-B-C21, MAT2016-77852-C2-1-R). C. D., N. A. A., A. L. P., an N. P. G. acknowledge the financial support through the “Severo Ochoa” program for Centres of Excellence in R&D (SEV-2015-0496). S. G. C. thanks the Generalitat de Catalunya for a Beatriu de Pinòs grant (2017 BP 00080). N. A. A. thanks the Generalitat de Catalunya for the grant 2017SGR1277., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Novel Zn(II) Coordination Polymers Based on the Natural Molecule Bisdemethoxycurcumin

  • Rodríguez Cid, Laura
  • Sañudo, E. Carolina
  • López Periago, Ana M.
  • González Campo, Arántzazu
  • Aliaga Alcalde, Nuria
  • Domingo Pascual, M. Concepción
This article introduces a new family of coordination polymers (CPs) that contains a natural biocompatible curcumin derivative, the bisdemethoxycurcumin (BDMC), coordinated to Zn(II) centers. The reaction between BDMC and zinc acetate, performed under mild conditions in ethanol, provides a new 1D phase termed BDMCZn-1. In addition, dimensionality and porosity of this network have been expanded by studying the reaction occurring between three species, the BDMC, the Zn(II) and a ditopic co-linker: 1,2-bis(4-pyridyl)ethylene, 1,3-bis(4- pyridyl)propane or 4,4'-bipyridine. In total, seven new CPs are presented, named as BDMCZnx. The structures of five of them could be elucidated by single crystal X-ray diffraction. Moreover, we show that the combination of the latest technique with solid-state 13C nuclear magnetic resonance is a powerful tool set to analyze the coordination modes of the BDMC, providing insight into the two unresolved structures. In the achievement of the new CPs, we further discuss the coordination capacity of BDMC, the relevance of solvents and supramolecular interactions., This work has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 R&D programme (ERC-724981). We also acknowledge the Spanish Government, Ministerio de Ciencia e Innovación (projects CTQ2017-83632, CTQ2015-68370-P and PGC2018-098630-B-I00 - MAT2016-77852-C2-1-R, and Ramon y Cajal grant RYC-2017-22910) and the Generalitat de Catalunya for the grant 2017SGR1277. C.D., N.A.A., A.L.P., A.G.C., and L.R.C. acknowledge the financial support through the “Severo Ochoa” program for Centres of Excellence in R&D (SEV-2015-0496) under the FUNMAT-FIP-2016 fellowship. Special thanks to the Alba synchrotron for the possibility of carrying out the measurements of the crystals in the experiments AV-2017042211, AV-2018052864, AV-2018072912, and AV-2019023285 at beamline BL13–XALOC. This work (L.R.C.) has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Determination of Curcuminoids by Liquid Chromatography with Diode Array Detection: Application to the Characterization of Turmeric and Curry Samples

  • Vidal, Òscar
  • Castilla, Xavier
  • Aliaga Alcalde, Nuria
  • López Periago, Ana M.
  • Domingo Pascual, M. Concepción
Background: A simple, rapid and efficient method for the determination of curcumin and other polyphenols in turmeric and curry samples was here developed. The method relied on sample extraction with methanol and extract analysis by liquid chromatography with diode array detection (HPLC-DAD). Methods: The separation of components was carried out in reversed-phase mode using an elution gradient based on 0.1% (v/v) formic acid aqueous solution and acetonitrile as the components of the mobile phase. Chromatograms were recorded at 420 nm for specific monitoring of curcumin and related compounds. Results: Extraction and separation conditions were optimized by experimental design and multicriteria response functions. Figures of merit were established under the selected experimental conditions. In general, repeatability of peak areas were better than 0.4%, detection limits were below 0.006 mg L-1 and quantitative recoveries expressed as a percentage were about 100 ± 2. The method was applied to quantify curcuminoids in commercial samples. It was found that apart from curcumin, demethoxycurcumin and bisdemethoxycurcumin, other related molecules also occurred in the samples. In this regard, a tentative elucidation of possible unknown curcuminoids was attempted by liquid chromatography coupled to mass spectrometry. Conclusion: Differences in the compositional profiles among samples were encountered to be relevant, so that the resulting HPLC-DAD data was exploited for chemometric characterization of turmeric and curry samples. Samples were successfully discriminated according to matrix types, species varieties and origins., This work was financed by the Spanish Ministry of Economy and Competitiveness through the projects CTQ2014-56324-CO2-P1, MAT2014-53500-R, MAT2016-77852-C2-1-R and the “Severo Ochoa” Programme for Cen-ters of Excellence in R&D (SEV-2015-0496), and by Gener-alitat de Catalunya with project 2014SGR377., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Broadening the scope of high structural dimensionality nanomaterials using pyridine-based curcuminoids

  • Rodríguez Cid, Laura
  • Qian, Wenjie
  • Iribarra Araya, Joseline
  • Etcheverry Berríos, Álvaro
  • Martínez Olmos, Eulalia
  • Choquesillo-Lazarte, Duane
  • Sañudo, Eva Carolina
  • Roubeau, Olivier
  • López Periago, Ana M.
  • González Campo, Arántzazu
  • Giner Planas, José
  • Soler, Mònica
  • Domingo Pascual, M. Concepción
  • Aliaga Alcalde, Nuria
We present a new heteroditopic ligand (3pyCCMoid) that contains the typical skeleton of a curcuminoid (CCMoid) decorated with two 3-pyridyl groups. The coordination of 3pyCCMoid with ZnII centres results in a set of novel coordination polymers (CPs) that display different architectures and dimensionalities (from 1D to 3D). Our work analyses how synthetic methods and slight changes in the reaction conditions affect the formation of the final materials. Great efforts have been devoted toward understanding the coordination entities that provide high dimensional systems, with emphasis on the characterization of 2D materials, including analyses of different types of substrates, stability and exfoliation in water. Here, we foresee the great use of CCMoids in the field of CPs and emphasize 3pyCCMoid as a new-born linker., This work has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 R&D programme (ERC-724981). We also acknowledge the Spanish Government, Ministerio de Ciencia e Innovación (projects CTQ2017-83632, CTQ2015-68370-P, PGC2018-098630-B-I00, MAT2016-77852-C2-1-R, CTQ2016-75150-R, PGC2018-098630-B-I00, PGC2018-102047-B-I00 and Ramon y Cajal grant RYC-2017-22910) and the Generalitat de Catalunya for the grant 2017SGR1277. The work at the University of Chile was supported by ANID, Fondecyt Regular Project 1201962 and 1161775 (M. S.). C. D., N. A.-A., A. L.-P., A. G.-C., and L. R.-C. acknowledge the financial support through the “Severo Ochoa” program for Centres of Excellence in R&D (SEV-2015-0496) under the FUNMAT-FIP-2016 fellowship. Some of the experiments were performed at the XALOC46 and NCD-SWEET beamlines of the ALBA synchrotron with the support of ALBA staff and at the Advanced Light Source (ALS) synchrotron. The Advanced Light Source is supported by the Director, Office of Science, Office of Basic Energy Sciences of the U.S. Department of Energy under contract no. DE-AC02-05CH11231. This work (L. R.-C.) has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning Single‐Molecule Conductance in Metalloporphyrin‐Based Wires via Supramolecular Interactions

  • Aragonès, Albert C.
  • Martín Rodríguez, Alejandro
  • Aravena, Daniel
  • Puigmartí Luis, Josep
  • Amabilino, David B.
  • Aliaga Alcalde, Nuria
  • González Campo, Arántzazu
  • Ruiz, Eliseo
  • Díez Pérez, Ismael
Nature has developed supramolecular constructs to deliver outstanding charge‐transport capabilities using metalloporphyrin‐based supramolecular arrays. Herein we incorporate simple, naturally inspired supramolecular interactions via the axial complexation of metalloporphyrins into the formation of a single‐molecule wire in a nanoscale gap. Small structural changes in the axial coordinating linkers result in dramatic changes in the transport properties of the metalloporphyrin‐based wire. The increased flexibility of a pyridine‐4‐yl‐methanethiol ligand due to an extra methyl group, as compared to a more rigid 4‐pyridinethiol linker, allows the pyridine‐4‐yl‐methanethiol ligand to adopt an unexpected highly conductive stacked structure between the two junction electrodes and the metalloporphyrin ring. DFT calculations reveal a molecular junction structure composed of a shifted stack of the two pyridinic linkers and the metalloporphyrin ring. In contrast, the more rigid 4‐mercaptopyridine ligand presents a more classical lifted octahedral coordination of the metalloporphyrin metal center, leading to a longer electron pathway of lower conductance. This works opens to supramolecular electronics, a concept already exploited in natural organisms., This research was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades (grants PGC2018‐093863‐B‐C21, MAT2016‐77852‐C2−1‐R and MDM‐2017‐0767) and the ERC Grants Fields4CAT (grant 772391) and Tmol4TRANS (grant 724981). I. D.‐P. thanks King's College London for start‐up funds support. A.M.R. thanks the Ministerio for a predoctoral FPI grant. E.R. thanks Generalitat de Catalunya for an ICREA Academia award and for the SGR2017‐1289 grant. N.A.‐A. and A.G.‐C. thank the Generalitat de Catalunya for the grant 2017SGR1277 and the Severo Ochoa Program for Centers of Excellence in R&D (SEV‐2015‐0496). A.G.C. thanks Ministerio de ciencia e Innovacion for Ramon y Cajal grant (RYC‐2017‐22910). The authors acknowledge the general facilities of the University of Barcelona (CCiT‐UB) and the computer resources, technical expertise and assistance provided by the Barcelona Supercomputing Centre., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design Dependence of the Interface Structure and Crystalline Order of Organic Semiconductor/Dopant Heterojunctions: Pentacene/C60F48

  • Silvestri, Francesco
  • Linus Pithan
  • Babuji, Adara
  • Ocal, Carmen
  • Barrena, Esther
Planar and mixed heterojunctions are the common architectures respectively used for contact and bulk doping in organic electronics. Beyond the success of empirical methods, knowing how the incorporation of dopant molecules affects the structural properties of the organic semiconductor film is essential for the design optimization of devices with efficient electrical properties. With this aim, we exploit out-of-plane and grazing incidence X-ray diffraction (GIXD) to characterize engineered heterojunctions fabricated on native SiO2 substrates with pentacene as an organic semiconductor and C60F48 as a dopant. A strong interaction between the two species is inferred, which dramatically influences the crystalline order in the different architectures. While C60F48 crystalline domains orient randomly on the SiO2 surface, the ulterior deposition of pentacene is demonstrated to induce the orientational order and reorganization of the underlying C60F48. In the inverse architecture, the highly [001]-oriented pentacene film on SiO2 has a template effect on C60F48, inducing the formation of a face-centered cubic [111]-oriented film and leading to an ordered planar heterostructure. Real-time GIXD reveals the presence of a strained C60F48 layer at the interface with a gradual relaxation and transition to 3D crystallite formation with increasing coverage. When mixed in the bulk by co-evaporation, the dopant adopts an amorphous state, embedded in a polycrystalline pentacene matrix. The interfacial effects reported here would have relevant repercussion on the efficiency of molecular doping, which makes it possible to foresee the establishment of guidelines for device performance improvement through interface engineering., This work has been supported by the Spanish Government under the project PID2019-110907GB-I00, MAT2016-77852-C2-1-R (AEI/FEDER, UE) and the “Severo Ochoa” Program for Centres of Excellence in R&D (CEX2019-000917-S) and by the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 730872 and the Marie Skłodowska-Curie grant agreement no. 722651 (SEPOMO project). The authors also acknowledge the Generalitat de Catalunya grant 2017 SGR668. This work has been carried out within the framework of the doctoral program (PhD) of Material Science (Department of Physics) of the Universitat Autonoma de Barcelona (UAB). A.B. thanks the Spanish Government financial support through BES-2016-077519 FPI fellowship. The authors thank the European Synchrotron Radiation Facility (ESRF) for providing access to ID03 for the time of the experiment. The authors are grateful to Nir Tessler and Olga Solomeshch from the Nanoelectronic Center of Technion (Haifa, Israel) for providing the dopant molecule., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

From high quality packing to disordered nucleation or phase separation in donor/acceptor interfaces: ClAlPc-C60 on Au(111)

  • Barrena, Esther
  • Palacios-Rivera, Rogger
  • Martínez, José I.
  • Ocal, Carmen
The dramatic consequences that the orientation adopted by the molecular dipoles, in diverse arrays of chloroaluminum phthalocyanine (ClAlPc) on Au(111), have on the ulterior adsorption and growth of C60 are explored by means of an all scanning probe microscopy approach. The unidirectional downwards organization of the molecular dipoles at the first layer reduces charge transfer from the metal to C60. Imbalance between attractive and repulsive interactions of the fullerenes are crucial for their ordered supramolecular aggregation. The effect at the basis of such self-assembling seems to be released by the all upwards dipole orientation adopted on the ClAlPc second layer. The low electronic corrugation of the bilayer repercutes in a higher mobility of the fullerenes which for similar coverages diffuse large distances to reach uncoverd first layer regions. Density functional theory calculations corroborate the experimental observations indicating the relevance of charge transfer, potential energy surface corrugation, C60 on-surface diffusion barriers and screening. The structure of the co-adsorbed C60 and ClAlPc layers strongly depends on the deposition sequence. Phase-separation, where each molecule adopts the single-component assembly, occurs if C60 is deposited first. The present results contribute to understanding the influence of the dipolar nature of molecular layers on the electronic and structure of donor/acceptor heterojunctions, which is crucial for device design via engineering the energy levels algingment at the organic-organic and organic-metal interfaces., This work has been supported by the Spanish Government under the project PID2019-110907GB-I00, MAT2016-77852-C2- 1-R and MAT2017-85089-C2-1-R (AEI/FEDER, UE) and the ‘‘Severo Ochoa’’ Program for Centres of Excellence in R&D (CEX2019-000917-S). We also acknowledge the Generalitat de Catalunya grant 2017 SGR668. J.I.M. acknowledges Comunidad de Madrid via “Programa de Investigación Tecnologías 2018” (FOTOART-CM S2018/NMT-4367), and the EU Innovation Program under grant agreement 881603 (GrapheneCore3- Graphene-based disruptive technologies)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Broadening the scope of high structural dimensionality nanomaterials using pyridine-based curcuminoids

  • Rodríguez-Cid L.
  • Qian W.
  • Iribarra-Araya J.
  • Etcheverry-Berríos Á.
  • Martínez-Olmos E.
  • Choquesillo-Lazarte D.
  • Sañudo E.C.
  • Roubeau O.
  • López-Periago A.M.
  • González-Campo A.
  • Planas J.G.
  • Soler M.
  • Domingo C.
  • Aliaga-Alcalde N.
We present a new heteroditopic ligand (3pyCCMoid) that contains the typical skeleton of a curcuminoid (CCMoid) decorated with two 3-pyridyl groups. The coordination of 3pyCCMoid with ZnII centres results in a set of novel coordination polymers (CPs) that display different architectures and dimensionalities (from 1D to 3D). Our work analyses how synthetic methods and slight changes in the reaction conditions affect the formation of the final materials. Great efforts have been devoted toward understanding the coordination entities that provide high dimensional systems, with emphasis on the characterization of 2D materials, including analyses of different types of substrates, stability and exfoliation in water. Here, we foresee the great use of CCMoids in the field of CPs and emphasize 3pyCCMoid as a new-born linker.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Real space demonstration of induced crystalline 3D nanostructuration of organic layers

  • Paradinas, Markos|||0000-0003-1006-9506
  • Pérez Rodríguez, Ana|||0000-0002-5778-0103
  • Barrena, Esther|||0000-0001-9163-2959
  • Ocal García, Carmen|||0000-0001-8790-8844
The controlled 3D nanostructuration of molecular layers of the semiconducting molecules CH (pentacene) and N,N'-dioctyl-3,4,9,10-perylene tetracarboxylic diimide (PTCDI-C8) is addressed. A tip-assisted method using atomic force microscopy (AFM) is developed for removing part of the organic material and relocating it in up to six layer thick nanostructures. Moreover, unconventional molecular scale imaging combining diverse friction force microscopy modes reveals the stacking sequence of the piled layers. In particular, we unambiguously achieve epitaxial growth, an issue of fundamental importance in thin film strategies for the nanostructuration of more efficient organic nanodevices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Boosting Self-Assembly Diversity in the Solid-State by Chiral/Non-Chiral ZnII-Porphyrin Crystallization

  • Qian, Wenjie|||0000-0003-1696-8094
  • González Campo, Arántzazu|||0000-0002-1209-8119
  • Pérez Rodríguez, Ana|||0000-0002-5778-0103
  • Rodríguez-Hermida, Sabina|||0000-0001-7671-9925
  • Imaz, Inhar|||0000-0002-0278-1141
  • Wurst, Klaus|||0000-0002-8774-9051
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Ruiz, Eliseo|||0000-0001-9097-8499
  • Ocal García, Carmen|||0000-0001-8790-8844
  • Barrena, Esther|||0000-0001-9163-2959
  • Amabilino, David B.|||0000-0003-1674-8462
  • Aliaga-Alcalde, Núria|||0000-0003-1080-3862
A chiral Zn porphyrin derivative 1 and its achiral analogue 2 were studied in the solid state. Considering the rich molecular recognition of designed metalloporphyrins 1 and 2 and their tendency to crystallize, they were recrystallized from two solvent mixtures (CHCl/CHOH and CHCl/hexane). As a result, four different crystalline arrangements (1 a,b and 2 a,b, from 0D to 2D) were obtained. Solid-state studies were performed on all the species to analyze the role played by chirality, solvent mixtures, and surfaces (mica and HOPG) in the supramolecular arrangements. By means of combinations of solvents and substrates a variety of microsized species was obtained, from vesicles to flower-shaped arrays, including geometrical microcrystals. Overall, the results emphasize the environmental susceptibility of metalloporphyrins and how this feature must be taken into account in their design.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

In-situ scrutiny of the relationship between polymorphic phases and properties of self-assembled monolayers of a biphenyl based thiol

  • Paradinas, Markos|||0000-0003-1006-9506
  • Munuera, Carmen|||0000-0001-8524-9304
  • Buck, Manfred
  • Ocal García, Carmen|||0000-0001-8790-8844
Two polymorphic phases of ω-(4'-methylbiphenyl-4-yl) butane-1-thiol (BP4) molecules formed on Au(111) were investigated by multidimensional atomic force microscopy, combining conductivity measurements, electrostatic characterization, friction force mapping, and normal force spectroscopy. Based on the same molecular structure but differing in molecular order, packing density, and molecular tilt, the two phases serve as a test bench to establish the structure-property relationships in self-assembled monolayers (SAMs). From a detailed analysis of the charge transport and electrostatics, the contributions of geometrical and electronic effects to the tunneling are discussed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Carbon-paste nanocomposites as unconventional gate electrodes for electrolyte-gated organic field-effect transistors, Electrical modulation and bio-sensing

  • Muñoz, Jose|||0000-0001-9529-6980
  • Leonardi, Francesca|||0000-0001-6219-6991
  • Özmen, Tayfun
  • Riba Moliner, Marta
  • González Campo, Arántzazu|||0000-0002-1209-8119
  • Mas-Torrent, Marta|||0000-0002-1586-005X
  • Baeza, Mireia|||0000-0002-2240-6410
Nanocomposite carbon-paste electrodes (NC-CPEs) have been investigated for the first time in electrolyte-gated organic field-effect transistors (EGOFETs) as a replacement of conventional metal gate electrodes, using carbon nanotubes (CNTs) as a model carbon filler. Interestingly, the electrical properties of the resulting devices have been modulated by changing the loading percentage of CNTs within the insulating polymeric matrix. The potential of using such non-conventional gate electrodes for sensing purposes has also been evaluated by investigating, as a proof of concept, the formation of a supramolecular complex between a functionalized CNT-based NC-CPE containing β-cyclodextrin (β-CD) as a bio-recognition element and tryptophan (TRP). This approach, in synergism with the amplification function of an EGOFET, affords a shift in the threshold voltage (V) of the transistor, giving promising analytical results with detection limits at picomolar levels (1.0 ± 0.1 pM) as well as a linear response from 10 to 10 M. Accordingly, NC-CPEs have been demonstrated to be a potential alternative to metal gate electrodes for the development of a new generation of highly sensitive carbon-based EGOFET bio-sensors.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Water adsorption, dissociation and oxidation on SrTiO3 and ferroelectric surfaces revealed by ambient pressure X-ray photoelectron spectroscopy

  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Pach, Elzbieta|||0000-0001-9587-3768
  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Pérez-Dieste, Virginia
  • Escudero, Carlos|||0000-0001-8716-9391
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
Water dissociation on oxides is of great interest because its fundamental aspects are still not well understood and it has implications in many processes, from ferroelectric polarization screening phenomena to surface catalysis and surface chemistry on oxides. In situ water dissociation and redox processes on metal oxide perovskites which easily expose TiO-terminated surfaces, such as SrTiO, BaTiO or Pb(Zr,Ti)O, are studied by ambient pressure XPS, as a function of water vapour pressure. From the analysis of the O1s spectrum, we determine the presence of different types of oxygen based species, from hydroxyl groups, either bound to Ti and metal sites or lattice oxygen, to different peroxide compounds, and propose a model for the adsorbate layer composition, valid for environmental conditions. From the XPS analysis, we describe the existing surface redox reactions for metal oxide perovskites, occurring at different water vapour pressures. Among them, peroxide species resulting from surface oxidative reactions are correlated with the presence of Ti ions, which are observed to specifically promote surface oxidation and water dissociation as compared to other metals. Finally, surface peroxidation is enhanced by X-ray beam irradiation, leading to a higher coverage of peroxide species after beam overexposure and by ferroelectric polarization, demonstrating the enhancement of the reactivity of the surfaces of ferroelectric materials due to the effect of internal electric fields.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Single molecule magnets of cobalt and zinc homo- and heterometallic coordination polymers prepared by a one-step synthetic procedure

  • Portoles-Gil, Nuria|||0000-0002-2580-4641
  • Gómez-Coca, Silvia|||0000-0002-2299-4697
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Marbán, Gregorio|||0000-0002-8387-3282
  • Aliaga-Alcalde, Núria|||0000-0003-1080-3862
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Ayllón, José A.|||0000-0001-7965-7424
  • Domingo, Concepción|||0000-0001-7857-2760
The synthesis of 1D cobalt and zinc monometallic and heterometallic coordination polymers (CPs) was carried out applying one-pot synthetic methods by using either supercritical carbon dioxide or ethanol as the solvent. A collection of four 1D CPs were thus obtained by the combination of a metal (or a mixture of metals) with the linker 1,4-bis(4-pyridylmethyl)benzene. The used metallic complexes were zinc and cobalt hexafluoroacetylacetonate, which can easily incorporate pyridine ligands in the coordination sphere of the metal centre. Independently of the used solvent, the precipitated phases involving Zn(), i.e., homometallic CP of Zn() and bimetallic CP of Zn()/Co(), were isostructural. Contrarily, homometallic CPs of Co() were precipitated as an isostructural phase of Zn() or with a different structure, depending on the used solvent. All the structures were resolved by XRD using synchrotron radiation. In addition, the magnetic properties of the new CPs involving Co() were studied. Remarkably, at low temperatures with the application of an external field, they acted as field-induced single molecule magnets. One-pot synthesis of heterometallic (Zn()/Co()) nodes directing CP magnetic behaviour to single molecule magnets.