Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

HKUST-1 metal-organic framework nanoparticle/graphene oxide nanocomposite aerogels for CO2and CH4Adsorption and separation

  • Rosado, Albert|||0000-0003-3222-9566
  • Borrás Caballero, Alejandro|||0000-0002-0725-421X
  • Fraile, Julio|||0000-0003-2961-7920
  • Navarro, Jorge A. R.|||0000-0002-8359-0397
  • Suárez-García, Fabián|||0000-0002-1970-293X
  • Stylianou, Kyriakos C.|||0000-0003-1670-0020
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Giner Planas, José|||0000-0002-1648-2169
  • Domingo, Concepción|||0000-0001-7857-2760
  • Yazdi, Amirali|||0000-0001-9420-8504
The development of nanostructured composites made of metal-organic frameworks (MOFs) and graphene-based components, including exfoliated nanoplates of graphene oxide (GO) or reduced (rGO) graphene oxide, is an area of great interest in gas storage and separation. To improve the industrial viability, it is commonly demanded to build these nanocomposites with the shape of compact units, such as monoliths, foams, pellets, or films. Methods to generate those 3D nanocomposites involving rGO are abundant; however, they become scarce when GO is the desired support due to the difficulty in maintaining the carbon matrix oxidized during the structuration process. In this work, a methodology based on the use of supercritical CO2 (scCO2) is described for the synthesis of nanocomposites involving a discontinuous MOF phase, e.g. nanoparticles (NPs) of HKUST-1, decorating the surface of a continuous GO matrix, with surface oxygen groups favoring MOF attachment. The use of this new supercritical methodology allows the nanostructuration of the composite in the form of 3D aerogels while avoiding the reduction of GO. Enhanced values of textural properties, determined by low-temperature N2 adsorption-desorption, were observed for the nanocomposites in comparison to the values calculated for similar physical mixtures, highlighting an increase of 40-45% in the value of the surface area for samples with a high percentage of HKUST-1. Moreover, the composite aerogels, displaying a type II isotherm, outperform pristine HKUST-1 in regard to the CH4 practical working capacity at high pressure. Particularly, a composite exhibiting more than 2-fold the working capacity of net HKUST-1 NPs was obtained. Columns involving the composite aerogel as the stationary phase were used to study the separation of N2/CO2 and CH4/CO2 gas mixtures. The results showed a high selectivity of the nanostructured HKUST-1@GO composites for CO2, with breakthrough times of ca. 20 min g-1 and stable cyclic operations.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preparation and Characterization of Graphene Oxide Aerogels: Exploring the Limits of Supercritical CO2 Fabrication Methods

  • Borrás, Alejandro
  • Gonçalves, Gil
  • Marbán Calzón, Gregorio
  • Sandoval, Stefania
  • Pinto, Susana C.
  • Marques, Paula A.A.P.
  • Fraile, Julio
  • Tobias, Gerard
  • López Periago, Ana M.
  • Domingo, Concepción
The supercritical carbon dioxide synthesis of non-reduced graphene oxide (GO) aerogels from dispersions of GO in ethanol is here reported as a low-cost, efficient and environmentally friendly process. The preparation is carried out at the mild conditions of 333 K and 20 MPa. The high aspect ratio of the used GO sheets (ca. 30 μm lateral dimensions) allowed the preparation of aerogel monoliths by simultaneous scCO2 gelation and drying. Solid state characterization results indicate that a thermally stable mesoporous non-reduced GO aerogel was obtained by using the supercritical procedure, keeping the GO sheets most of the surface oxygenated groups, thus, facilitating further functionalization. Moreover, the monoliths have a very low density, high specific surface area and excellent mechanical integrity, characteristics which rivals with that of most light-weight reduced graphene aerogels reported in the literature., This work was financed by the Spanish National Plan of Research with projects CTQ2014-56324, CTQ2017-83632 and MAT2017-86616-R. C.D., G.T, A.B, G.G., S.S., J.F. and A.L.P. acknowledge the financial support from the Spanish MEC, through the Severo Ochoa Program for Centers of Excellence in R&D (SEV-2015-0496). This work (A.B.) has been done in the framework of the doctoral program "Chemistry" of the Universitat Autònoma de Barcelona. A.L.P. acknowledges the RyC-2012-11588 contract. A.B. acknowledges FPI grant. G.G. acknowledges the funding by EC H2020 under individual fellowship Marie Sklodowska-Curie (NANOTER, Grant Agreement 708351). P.M. and S.P. acknowledge the FCT/MCTES for respectively, a research contract under the Program Investigator (IF/00917/2013/ CP1162/CT0016) and PhD grant SFRH/BD/111515/2015; also UID/EMS/00481/2013-FCT and CENTRO-01-0145-FEDER-022083., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bacterial cellulose/graphene oxide aerogels with enhanced dimensional and thermal stability

  • Pinto, Susana C.
  • Gonçalves, Gil
  • Sandoval, Stefania
  • López Periago, Ana M.
  • Borrás, Alejandro
  • Domingo, Concepción
  • Tobias, Gerard
  • Duarte, Isabel
  • Vicente, Romeu
  • Marques, Paula A.A.P.
We present a novel method for processing bacterial cellulose/graphene oxide (BC/GO) aerogels with multifunctional properties. The addition of a small amount of dimethyl sulfoxide (DMSO) to the aqueous dispersion of the nanomaterials during the gelification process affected the water freezing temperature of the system and thereby affecting the porous structure of the aerogel obtained after liophilization. The possibility to obtain small and elongated pore with axial orientation allowed a significant improvement of the structural stability of the aerogels. Moreover, the aerogels reduction by thermal treatment with ammonia gas induced crosslinking between the different nanophases, thus given an incremental factor for the mechanical performance of the aerogels under harsh conditions. The resulting aerogels also showed significant improvements in terms of thermal stability and electrical conductivity. These multifunctional BC/GO aerogels present high potential as sustainable and ecological alternative materials for lightweight packaging, filters for atmosphere and water treatment, or energy applications., The present study was supported by the Portuguese Foundation for Science and Technology (FCT) under the Grant SFRH/BD/111515/2015 (S. Pinto), the Contract CEECIND/01913/2017 (G. Gonçalves) and UID/EMS/00481/2019-FCT for the TEMA Research Unit. We acknowledge CENTRO-01-0145-FEDER-022083 - Centro Portugal Regional Operational Programme (Centro2020), under the PORTUGAL 2020 Partnership Agreement, through the European Regional Development Fund. The Spanish National Plan of Research with projects CTQ2017-83632; MAT2017-86616-R, and by Generalitat de Catalunya (2017 SGR 581). SS., C.D., A.L.P, A.B. and G. T. acknowledge the financial support from the Spanish MEC, through the Severo Ochoa Program for Centers of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning the structure and flexibility of coordination polymers via solvent control of tritopic triazine conformation during crystallization

  • Portolés Gil, Núria
  • López Periago, Ana M.
  • Borrás, Alejandro
  • Fraile, Julio
  • Solano, Eduardo
  • Vallcorba, Oriol
  • Giner Planas, José
  • Ayllón, José A.
  • Domingo Pascual, M. Concepción
Soft crystallization routes for the controlled growth of oneand two-dimensional Cu(II)-coordination polymers of the type [(Cu- (hfa)2)x(3-tpt)]n (hfa = hexafluoroacetylacetonate, 3-tpt = 2,4,6-tris(3- pyridyl)-1,3,5-triazine) are described. Three volatile solvents with different protic/aprotic characteristics were chosen as the reaction media, e.g., supercritical CO2, chloroform, and ethanol. Five (1−5) new compounds were crystallized, with different structures and Cu(II)/3-tpt ratios. The structures of 3-tpt and five new coordination polymers were elucidated by single-crystal synchrotron X-ray diffraction. A description of the crystallization pathways followed for the synthesis of the individual compounds is given based on the protic or aprotic character of the used solvents and reagents’ solubility constraints. The main novelty of the work relies in establishing the foundations of 3-tpt isomeric control during crystallization through solvent selection. From the five precipitated new compounds, 3 displays a significant framework flexibility, associated with N2 adsorption at low temperature, presenting a stepwise adsorption isotherm. The N2 adsorption process was followed by in situ synchrotron X-ray powder diffraction, This work was financed by the Spanish National Plan of Research with project CTQ2017-83632. C.D., J.G.P., A.B., N.P.-G., J.F., and A.M.L.-P. acknowledge the financial support from the Spanish MEC, through the Severo Ochoa Program for Centres of Excellence in R&D (SEV-2015-0496). This work (N.P.-G., A.B., and J.F.) has been done in the framework of the doctoral program “Chemistry” of the Universitat Autonoma de Barcelona. A.M.L.-P. acknowledges the RyC- ̀ 2012-11588 contract. N.P.-G. and A.B. acknowledge FPI grants. ALBA synchrotron is acknowledged for the provision of beam time., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Novel Zn(II) Coordination Polymers Based on the Natural Molecule Bisdemethoxycurcumin

  • Rodríguez Cid, Laura
  • Sañudo, E. Carolina
  • López Periago, Ana M.
  • González Campo, Arántzazu
  • Aliaga Alcalde, Nuria
  • Domingo Pascual, M. Concepción
This article introduces a new family of coordination polymers (CPs) that contains a natural biocompatible curcumin derivative, the bisdemethoxycurcumin (BDMC), coordinated to Zn(II) centers. The reaction between BDMC and zinc acetate, performed under mild conditions in ethanol, provides a new 1D phase termed BDMCZn-1. In addition, dimensionality and porosity of this network have been expanded by studying the reaction occurring between three species, the BDMC, the Zn(II) and a ditopic co-linker: 1,2-bis(4-pyridyl)ethylene, 1,3-bis(4- pyridyl)propane or 4,4'-bipyridine. In total, seven new CPs are presented, named as BDMCZnx. The structures of five of them could be elucidated by single crystal X-ray diffraction. Moreover, we show that the combination of the latest technique with solid-state 13C nuclear magnetic resonance is a powerful tool set to analyze the coordination modes of the BDMC, providing insight into the two unresolved structures. In the achievement of the new CPs, we further discuss the coordination capacity of BDMC, the relevance of solvents and supramolecular interactions., This work has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 R&D programme (ERC-724981). We also acknowledge the Spanish Government, Ministerio de Ciencia e Innovación (projects CTQ2017-83632, CTQ2015-68370-P and PGC2018-098630-B-I00 - MAT2016-77852-C2-1-R, and Ramon y Cajal grant RYC-2017-22910) and the Generalitat de Catalunya for the grant 2017SGR1277. C.D., N.A.A., A.L.P., A.G.C., and L.R.C. acknowledge the financial support through the “Severo Ochoa” program for Centres of Excellence in R&D (SEV-2015-0496) under the FUNMAT-FIP-2016 fellowship. Special thanks to the Alba synchrotron for the possibility of carrying out the measurements of the crystals in the experiments AV-2017042211, AV-2018052864, AV-2018072912, and AV-2019023285 at beamline BL13–XALOC. This work (L.R.C.) has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Green and Solvent-Free Supercritical CO2-Assisted Production of Superparamagnetic Graphene Oxide Aerogels: Application as a Superior Contrast Agent in MRI

  • Borrás, Alejandro
  • Fraile, Julio
  • Rosado, Albert
  • Marbán Calzón, Gregorio
  • Tobias, Gerard
  • López Periago, Ana M.
  • Domingo Pascual, M. Concepción
Extraordinary properties are often described for 2D nanocomposites involving graphene flakes and a second component selected from particles or fibers. From this family of hybrid materials, this study is centered on composites based on graphene oxide (GO), a multifunctional oxygenated version of graphene, and superparamagnetic iron oxide nanoparticles (SPIONs), with applications as contrast agents in magnetic resonance imaging (MRI). The research focuses on the loading of SPIONs onto a GO surface via a simple one-pot supercritical CO2 technique. The developed all-green synthesis approach allows the preparation of hybrid materials shaped into aerogels with large mesoporosity. The use of coated and uncoated components in the aerogel composites is analyzed with emphasis in the significance of the arrangement of the NPs into clusters on the GO surface and related with the magnetic properties. The development of composites involving organic coating has been widely studied to pursue the double objective of increasing NP/GO conjugation and improving the system biocompatibility. Extensive structural and functional characterization is carried out to understand the behavior of composites toward their performance as contrast agents in MRI., This work was financed by the Spanish National Plan of Research with projects CTQ2017-83632 and MAT2017-86616-R. C.D., G.T., A.B, J.F., and A.M.L.P. acknowledge the financial support from the Spanish MEC, through the Severo Ochoa Program for Centres of Excellence in R&D (SEV-2015-0496). This work (A.B.) has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona. A.M.L.P. acknowledges the RyC-2012-11588 contract. A.B. acknowledges the FPI grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multi-layered polydopamine coatings for the immobilization of growth factors onto highly-interconnected and bimodal PCL/HA-based scaffolds

  • Godoy Gallardo, María
  • Portolés Gil, Núria
  • López Periago, Ana M.
  • Domingo Pascual, M. Concepción
  • Hosta Rigau, Leticia
For bone tissue engineering applications, scaffolds that mimic the porous structure of the extracellular matrix are highly desirable. Herein, we employ a PCL/HA-based scaffold with a double-scaled architecture of small pores coupled to larger ones. To improve the osteoinductivity of the scaffold, we incorporate two different growth factors via polydopamine (PDA) coating. As a first step, we identify the maximum amount of PDA that can be deposited onto the scaffold. Next, to allow for the deposition of a second PDA layer which, in turn, will allow to increase the loading of growth factors, we incorporate a dithiol connecting layer. The thiol groups covalently react with the first PDA coating through Michael addition while also allowing for the incorporation of a second PDA layer. We load the first and second PDA layers with bone morphogenic protein-2 (BMP2) and vascular endothelial growth factor (VEGF), respectively, and evaluate the osteogenic potential of the functionalised scaffold by cell viability, alkaline phosphatase activity and the expression of three different osteogenesis-related genes of pre-seeded human mesenchymal stem cells. Through these studies, we demonstrate that the osteogenic activity of the scaffolds loaded with both BMP2 and VEGF is greater than scaffolds loaded only with BMP2. Importantly, the osteoinductivity is higher when the scaffolds are loaded with BMP2 and VEGF in two different PDA layers. Taken together, these results indicate that the as-prepared scaffolds could be a useful construct for bone-tissue applications., This work has been supported by the Lundbeck Foundation, Denmark (Grant No. R163-2013-15402), and the Danish Council for Independent Research (Grant No. 6111-00298B). C.D., N.P.G., and A.L.P. acknowledge the financial support from the Spanish MEC, through the Severo Ochoa Program for Centres of Excellence in R&D (SEV-2015-0496) and the Spanish National Plan of Research with project CTQ2017-83632. C.D. and A.L.P. are members of the SusPlast platform from the Spanish National Research Council (CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Broadening the scope of high structural dimensionality nanomaterials using pyridine-based curcuminoids

  • Rodríguez Cid, Laura
  • Qian, Wenjie
  • Iribarra Araya, Joseline
  • Etcheverry Berríos, Álvaro
  • Martínez Olmos, Eulalia
  • Choquesillo-Lazarte, Duane
  • Sañudo, Eva Carolina
  • Roubeau, Olivier
  • López Periago, Ana M.
  • González Campo, Arántzazu
  • Giner Planas, José
  • Soler, Mònica
  • Domingo Pascual, M. Concepción
  • Aliaga Alcalde, Nuria
We present a new heteroditopic ligand (3pyCCMoid) that contains the typical skeleton of a curcuminoid (CCMoid) decorated with two 3-pyridyl groups. The coordination of 3pyCCMoid with ZnII centres results in a set of novel coordination polymers (CPs) that display different architectures and dimensionalities (from 1D to 3D). Our work analyses how synthetic methods and slight changes in the reaction conditions affect the formation of the final materials. Great efforts have been devoted toward understanding the coordination entities that provide high dimensional systems, with emphasis on the characterization of 2D materials, including analyses of different types of substrates, stability and exfoliation in water. Here, we foresee the great use of CCMoids in the field of CPs and emphasize 3pyCCMoid as a new-born linker., This work has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 R&D programme (ERC-724981). We also acknowledge the Spanish Government, Ministerio de Ciencia e Innovación (projects CTQ2017-83632, CTQ2015-68370-P, PGC2018-098630-B-I00, MAT2016-77852-C2-1-R, CTQ2016-75150-R, PGC2018-098630-B-I00, PGC2018-102047-B-I00 and Ramon y Cajal grant RYC-2017-22910) and the Generalitat de Catalunya for the grant 2017SGR1277. The work at the University of Chile was supported by ANID, Fondecyt Regular Project 1201962 and 1161775 (M. S.). C. D., N. A.-A., A. L.-P., A. G.-C., and L. R.-C. acknowledge the financial support through the “Severo Ochoa” program for Centres of Excellence in R&D (SEV-2015-0496) under the FUNMAT-FIP-2016 fellowship. Some of the experiments were performed at the XALOC46 and NCD-SWEET beamlines of the ALBA synchrotron with the support of ALBA staff and at the Advanced Light Source (ALS) synchrotron. The Advanced Light Source is supported by the Director, Office of Science, Office of Basic Energy Sciences of the U.S. Department of Energy under contract no. DE-AC02-05CH11231. This work (L. R.-C.) has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

[Zn2Ac2(μ-Ac)2(bpymb)]n (Ac, acetate; bpymb, 1,4-bis(4-pyridylmethyl)benzene), a 2D coordination polymer obtained with a flexible N,N’-ditopic bipyridine linker

  • Portolés Gil, Núria
  • Vallcorba, Oriol
  • Domingo Pascual, M. Concepción
  • López Periago, Ana M.
  • Ayllón, José A.
The combination of the flexible N,N’-ditopic ligand 1,4-bis(4-pyridylmethyl)benzene (bpymb) with zinc(II) acetate (ZnAc) affords the synthesis of the two-dimensional coordination polymer [Zn2Ac2(μ-Ac)2(bpymb)]n, which was structurally characterized by single crystal XRD. In the resolved structure, the molar ratio metal:ligand was 2:1 for Ac:Zn. However, half of the acetate units are acting as bridging ligands, which allows the building of a layered structure. The description of this new structure increases the numerous family of compounds involving zinc acetate and a ditopic N,N’- ligand, and demonstrates a new possible architecture. The obtained coordination polymer was also characterized by elemental analysis, ATR-FTIR spectroscopy and TGA analysis. Besides, the photoluminescence properties of this compound where measured, showing that the weak photoluminescence of the free bpymb ligand increases after polymer formation., This work was financed by the Spanish National Plan of Research with project CTQ2017-83632. C.D. and A.M.L.-P. acknowledge the financial support from the Spanish MEC, through the Severo Ochoa Program for Centres of Excellence in R&D FUNFUTURE (CEX2019-000917-S). ALBA synchrotron is acknowledged for the provision of beam time., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fully supercritical CO2 preparation of a nanostructured MOF composite with application in cutaneous drug delivery

  • Kubovics, Márta
  • Rojas, Sara
  • López Periago, Ana M.
  • Fraile, Julio
  • Horcajada, Patricia
  • Domingo Pascual, M. Concepción
Supercritical CO2 (scCO2) technology is used here as an efficient method to assist in the preparation of a cutaneous polymeric formulation based on drug containing metal-organic framework composites. The supercritical fluid is used in three steps: (i) as a drying agent for the nanosized mesoporous matrix, (ii) as the impregnation vector of a topical antibiotic drug, and (iii) as a plasticizing and foaming fluid to obtain dispersions of the hybrid material into a biocompatible polymer, e.g., the macroporous patch. The materials were characterized using solid state techniques. The drug delivery and permeation profiles of the patches were investigated applying in vitro and ex vivo tests by using porcine skin. These analyses suggest that scCO2 impregnation is an easy and fast strategy to prepare composite devices able to progressively release and diffuse the incorporated drug throughout the skin, paving the way to efficiently prepare cutaneous devices for topical or systemic therapies., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (CEX2019–000917-S) and the Spanish National Plan of Research with projects CTQ2017–83632 and PID2020–115631GB-I00 (Concepción Domingo, Ana M. López and Márta Kubovics). Sara Rojas and Patricia Horcajada acknowledge the regional Madrid founding (Talento 2017 Modality 2, 2017-T2/IND-5149), the MOFSEIDON project (PID2019–104228RB-I00, MCI/AEI/FEDER, UE), and the Multifunctional Metallodrugs in Diagnosis and Therapy Network (MICIU, RED2018–102471-T). Márta Kubovics acknowledge the financial support from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Cofund grant (agreement no MSCA-COFUND-DP/0320–754397). Patricia Horcajada acknowledges the Spanish Ramon y Cajal Programme (grant agreement no. 2014–16823). Sara Rojas acknowledges the Spanish Juan de la Cierva Incorporación Fellowship (grant agreement no. IJC2019–038894-I). This work has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona by Márta Kubovics., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

HKUST-1 Metal–Organic Framework Nanoparticle/Graphene Oxide Nanocomposite Aerogels for CO2 and CH4 Adsorption and Separation

  • Rosado, Albert
  • Borrás, Alejandro
  • Fraile, Julio
  • Navarro, Jorge A.R.
  • Suárez García, Fabián
  • Stylianou, Kyriakos C.
  • López Periago, Ana M.
  • Giner Planas, José
  • Domingo, Concepción
  • Yazdi, Amirali
The development of nanostructured composites made of metal-organic frameworks (MOFs) and graphene-based components, including exfoliated nanoplates of graphene oxide (GO) or reduced (rGO) graphene oxide, is an area of great interest in gas storage and separation. To improve the industrial viability, it is commonly demanded to build these nanocomposites with the shape of compact units, such as monoliths, foams, pellets, or films. Methods to generate those 3D nanocomposites involving rGO are abundant; however, they become scarce when GO is the desired support due to the difficulty in maintaining the carbon matrix oxidized during the structuration process. In this work, a methodology based on the use of supercritical CO2 (scCO2) is described for the synthesis of nanocomposites involving a discontinuous MOF phase, e.g. nanoparticles (NPs) of HKUST-1, decorating the surface of a continuous GO matrix, with surface oxygen groups favoring MOF attachment. The use of this new supercritical methodology allows the nanostructuration of the composite in the form of 3D aerogels while avoiding the reduction of GO. Enhanced values of textural properties, determined by low-temperature N2 adsorption-desorption, were observed for the nanocomposites in comparison to the values calculated for similar physical mixtures, highlighting an increase of 40-45% in the value of the surface area for samples with a high percentage of HKUST-1. Moreover, the composite aerogels, displaying a type II isotherm, outperform pristine HKUST-1 in regard to the CH4 practical working capacity at high pressure. Particularly, a composite exhibiting more than 2-fold the working capacity of net HKUST-1 NPs was obtained. Columns involving the composite aerogel as the stationary phase were used to study the separation of N2/CO2 and CH4/CO2 gas mixtures. The results showed a high selectivity of the nanostructured HKUST-1@GO composites for CO2, with breakthrough times of ca. 20 min g-1 and stable cyclic operations., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (SEV-2015-0496 and CEX2019-000917-S) and the Spanish National Plan of Research with projects CTQ2017-83632, PID2020-115631GB-I00, CTQ2016-75150-R, CTQ2017-84692-R, RTI2018-100832-B-I00, and PID2019-106832RB-I00. J.A.R.N. thanks Junta de Andalucia (P18-RT-612). K.C.S. thanks the Department of Chemistry through start-up funding. This work has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona by A.R., A.B., and J.F.; A.R. and A.B. acknowledge FPI grants., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Meso/microporous MOF@graphene oxide composite aerogels prepared by generic supercritical CO2 technology

  • Borrás, Alejandro
  • Rosado, Albert
  • Fraile, Julio
  • López Periago, Ana M.
  • Giner Planas, José
  • Yazdi, Amirali
  • Domingo Pascual, M. Concepción
The increasing complexity in composition and structure of modern porous nanocomposite materials requires the development of advanced technologies that allow the simultaneous treatment of dissimilar compounds, not only with unlike composition but also involving different classes of pores, e.g., micro and mesopores. This work shows that supercritical CO2 (scCO2) technology can be used as generic processing aid to obtain composites involving non-reduced graphene oxide (GO) and metal organic frameworks (MOFs) in the form of aerogels with hierarchical porosity. Hybrid aerogels are formed by either depositing (ex situ) or growing (in situ) MOF nanocrystals onto the surface of 2D GO nanosheets. The archetypal hydrophilic HKUST-1 and UiO-66 and hydrophobic ZIF-8 microporous MOFs are chosen to exemplify the method possibilities. The ex situ route was adequate to prepare hydrophilic MOFs@GO homogeneous composites, while the in situ approach must be used to prepare hydrophobic MOFs@GO aerogels. Moreover, the scCO2 methodology should be adjusted for each studied MOF in regard of the organic solvent used to disperse the nanoentities constituting the composite. The end-products are obtained in the form of aerogels mimicking the shape of the recipient in which they are contained. The products are characterized in regard of structure by X-ray diffraction, textural properties by low temperature N2 adsorption/desorption and morphology by electronic microscopy., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (SEV-2015-0496 and CEX2019-000917-S) and the Spanish National Plan of Research with projects CTQ2017-83632, PID2020-115631GB-I00. This work has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona by A.B., A.R. and J.F.; A.B. and A.R. acknowledge FPI grants., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Broadening the scope of high structural dimensionality nanomaterials using pyridine-based curcuminoids

  • Rodríguez-Cid L.
  • Qian W.
  • Iribarra-Araya J.
  • Etcheverry-Berríos Á.
  • Martínez-Olmos E.
  • Choquesillo-Lazarte D.
  • Sañudo E.C.
  • Roubeau O.
  • López-Periago A.M.
  • González-Campo A.
  • Planas J.G.
  • Soler M.
  • Domingo C.
  • Aliaga-Alcalde N.
We present a new heteroditopic ligand (3pyCCMoid) that contains the typical skeleton of a curcuminoid (CCMoid) decorated with two 3-pyridyl groups. The coordination of 3pyCCMoid with ZnII centres results in a set of novel coordination polymers (CPs) that display different architectures and dimensionalities (from 1D to 3D). Our work analyses how synthetic methods and slight changes in the reaction conditions affect the formation of the final materials. Great efforts have been devoted toward understanding the coordination entities that provide high dimensional systems, with emphasis on the characterization of 2D materials, including analyses of different types of substrates, stability and exfoliation in water. Here, we foresee the great use of CCMoids in the field of CPs and emphasize 3pyCCMoid as a new-born linker.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Single molecule magnets of cobalt and zinc homo- and heterometallic coordination polymers prepared by a one-step synthetic procedure

  • Portoles-Gil, Nuria|||0000-0002-2580-4641
  • Gómez-Coca, Silvia|||0000-0002-2299-4697
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Marbán, Gregorio|||0000-0002-8387-3282
  • Aliaga-Alcalde, Núria|||0000-0003-1080-3862
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Ayllón, José A.|||0000-0001-7965-7424
  • Domingo, Concepción|||0000-0001-7857-2760
The synthesis of 1D cobalt and zinc monometallic and heterometallic coordination polymers (CPs) was carried out applying one-pot synthetic methods by using either supercritical carbon dioxide or ethanol as the solvent. A collection of four 1D CPs were thus obtained by the combination of a metal (or a mixture of metals) with the linker 1,4-bis(4-pyridylmethyl)benzene. The used metallic complexes were zinc and cobalt hexafluoroacetylacetonate, which can easily incorporate pyridine ligands in the coordination sphere of the metal centre. Independently of the used solvent, the precipitated phases involving Zn(), i.e., homometallic CP of Zn() and bimetallic CP of Zn()/Co(), were isostructural. Contrarily, homometallic CPs of Co() were precipitated as an isostructural phase of Zn() or with a different structure, depending on the used solvent. All the structures were resolved by XRD using synchrotron radiation. In addition, the magnetic properties of the new CPs involving Co() were studied. Remarkably, at low temperatures with the application of an external field, they acted as field-induced single molecule magnets. One-pot synthesis of heterometallic (Zn()/Co()) nodes directing CP magnetic behaviour to single molecule magnets.