Skip to main content

INVESTIGACION DE VANGUARDIA EN AEROGELES DE GRAFENO COMO IMPULSORES DE DESARROLLO TECNOLOGICO

PID2020-115631GB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

BioMOF@cellulose Glycerogel Scaffold with Multifold Bioactivity, Perspective in Bone Tissue Repair

  • Rosado, Albert|||0000-0003-3222-9566
  • Borrás Caballero, Alejandro|||0000-0002-0725-421X
  • Sánchez-Soto, Miguel|||0000-0002-0023-5059
  • Labíková, Magdaléna
  • Hettegger, Hubert|||0000-0002-9343-5673
  • Ramírez-Jiménez, Rosa Ana|||0000-0001-7563-2553
  • Rojo, Luís|||0000-0001-6334-6736
  • García-Fernández, Luis|||0000-0002-4179-2556
  • Aguilar, María Rosa|||0000-0001-7395-5754
  • Liebner, Falk|||0000-0002-8244-8153
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Ayllón, José A.|||0000-0001-7965-7424
  • Domingo, Concepción|||0000-0001-7857-2760
The development of new biomaterials for musculoskeletal tissue repair is currently an important branch in biomedicine research. The approach presented here is centered around the development of a prototypic synthetic glycerogel scaffold for bone regeneration, which simultaneously features therapeutic activity. The main novelty of this work lies in the combination of an open meso and macroporous nanocrystalline cellulose (NCC)-based glycerogel with a fully biocompatible microporous bioMOF system (CaSyr-1) composed of calcium ions and syringic acid. The bioMOF framework is further impregnated with a third bioactive component, i.e., ibuprofen (ibu), to generate a multifold bioactive system. The integrated CaSyr-1(ibu) serves as a reservoir for bioactive compounds delivery, while the NCC scaffold is the proposed matrix for cell ingrowth, proliferation and differentiation. The measured drug delivery profiles, studied in a phosphate-buffered saline solution at 310 K, indicate that the bioactive components are released concurrently with bioMOF dissolution after ca. 30 min following a pseudo-first-order kinetic model. Furthermore, according to the semi-empirical Korsmeyer-Peppas kinetic model, this release is governed by a case-II mechanism, suggesting that the molecular transport is influenced by the relaxation of the NCC matrix. Preliminary in vitro results denote that the initial high concentration of glycerol in the NCC scaffold can be toxic in direct contact with human osteoblasts (HObs). However, when the excess of glycerol is diluted in the system (after the second day of the experiment), the direct and indirect assays confirm full biocompatibility and suitability for HOb proliferation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Multifunctionalized zirconium-based MOF as a novel support for dispersed copper, application in CO2 adsorption and catalytic conversion

  • Rosado, Albert|||0000-0003-3222-9566
  • Popa, Ioana-Maria
  • Abo Markeb, Ahmad|||0000-0003-4385-0198
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Naughton, Eva Maria|||0000-0003-2120-1584
  • Eckhardt, Hans-Georg
  • Ayllón, José A.|||0000-0001-7965-7424
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Domingo, Concepción|||0000-0001-7857-2760
  • Negahdar, Leila|||0000-0002-9119-6445
CO2 conversion and utilization for global sustainability is an integral part of greenhouse gases management, typically for the production of fuels and specialty chemicals. Added value products, such as methanol, methane or formate, can be obtained by electrocatalysis and thermocatalysis, the two techniques addressed in this study. The main motivation of this study is to develop a copper based catalyst active in both processes, confronting the main concerns regarding typical metal catalysts related to nanoparticles aggregation and concomitant deactivation. For this, modified NU-1000, a water-stable mesoporous MOF, is used as a platform for the simultaneous coordination-stabilization of copper single atoms and CO2 adsorption. NU-1000 is synthetized with primary amino groups (-NH2 with affinity for CO2) by modifying the ligand prior to MOF synthesis, while post-synthetic solvent-assisted ligand incorporation is applied to insert thiol functionalities (-SH with affinity for copper) within the framework. To make the functionalized MOF catalytically active, a Cu2+ salt is impregnated into the MOF channels, which is further reduced with H2 to Cu+/Cu0 before performance assessment in CO2 conversion processes. The as-synthetized and spent catalysts were analysed regarding the structure (X-ray diffraction, infrared), bulk (mass spectrometry) and surface (X-ray photoelectron spectroscopy) composition, morphology (electronic microscopy and energy dispersive spectroscopy) and textural properties (N2 physisorption). The electrocatalytic reduction of CO2 was performed in the potential range of -0.8 to -1.8 V, indicating the formation of formic acid. Thermocatalytic experiments were carried out in an economically and energetically sustainable low-pressure (1 MPa) hydrogenation process. Methanol was obtained with 100% selectivity at temperatures up to 280 °C, and a space-time yield of ca. 100 mgMeOH gcat-1 h-1 which overcomes that of commercial CuZnO NPs designed for this purpose.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Supercritical CO2 assisted bioMOF drug encapsulation and functionalization for delivery with a synergetic therapeutic value

  • Rosado, Albert|||0000-0003-3222-9566
  • García-Fernández, Luis|||0000-0002-4179-2556
  • Aguilar, María Rosa|||0000-0001-7395-5754
  • Ramírez-Jiménez, Rosa Ana|||0000-0001-7563-2553
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Ayllón, José A.|||0000-0001-7965-7424
  • Domingo, Concepción|||0000-0001-7857-2760
Despite the impressive characteristics of biological metal organic frameworks (bioMOFs) for their use as drug delivery systems (DDs), there are still some parameters related to their structural stability and processing routes that have decelerated their realistic application in this field. Both drawbacks are unraveled in this work for the microporous bioMOF CaSyr-1 by using supercritical CO (scCO) to load the bioMOF with the anti-tubercular isoniazid (INH) drug, and functionalize its external surface with a hydrophobic protective layer of stearate (S). The hydrophobicized CaSyr-1(INH)/S vehicle is further coated with a neutral surfactant (PS60) to enhance the wettability of the system. In vitro tests, related to drug carrier biocompatibility and drug release in body simulated fluids, are performed to demonstrate potential prospective of the designed DDs in pharmacy. The synthetized product displayed total biocompatibility even at high concentrations, and the particle size and dissolution rate showed to be adequate for pulmonary administration.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

HKUST-1 metal-organic framework nanoparticle/graphene oxide nanocomposite aerogels for CO2and CH4Adsorption and separation

  • Rosado, Albert|||0000-0003-3222-9566
  • Borrás Caballero, Alejandro|||0000-0002-0725-421X
  • Fraile, Julio|||0000-0003-2961-7920
  • Navarro, Jorge A. R.|||0000-0002-8359-0397
  • Suárez-García, Fabián|||0000-0002-1970-293X
  • Stylianou, Kyriakos C.|||0000-0003-1670-0020
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Giner Planas, José|||0000-0002-1648-2169
  • Domingo, Concepción|||0000-0001-7857-2760
  • Yazdi, Amirali|||0000-0001-9420-8504
The development of nanostructured composites made of metal-organic frameworks (MOFs) and graphene-based components, including exfoliated nanoplates of graphene oxide (GO) or reduced (rGO) graphene oxide, is an area of great interest in gas storage and separation. To improve the industrial viability, it is commonly demanded to build these nanocomposites with the shape of compact units, such as monoliths, foams, pellets, or films. Methods to generate those 3D nanocomposites involving rGO are abundant; however, they become scarce when GO is the desired support due to the difficulty in maintaining the carbon matrix oxidized during the structuration process. In this work, a methodology based on the use of supercritical CO2 (scCO2) is described for the synthesis of nanocomposites involving a discontinuous MOF phase, e.g. nanoparticles (NPs) of HKUST-1, decorating the surface of a continuous GO matrix, with surface oxygen groups favoring MOF attachment. The use of this new supercritical methodology allows the nanostructuration of the composite in the form of 3D aerogels while avoiding the reduction of GO. Enhanced values of textural properties, determined by low-temperature N2 adsorption-desorption, were observed for the nanocomposites in comparison to the values calculated for similar physical mixtures, highlighting an increase of 40-45% in the value of the surface area for samples with a high percentage of HKUST-1. Moreover, the composite aerogels, displaying a type II isotherm, outperform pristine HKUST-1 in regard to the CH4 practical working capacity at high pressure. Particularly, a composite exhibiting more than 2-fold the working capacity of net HKUST-1 NPs was obtained. Columns involving the composite aerogel as the stationary phase were used to study the separation of N2/CO2 and CH4/CO2 gas mixtures. The results showed a high selectivity of the nanostructured HKUST-1@GO composites for CO2, with breakthrough times of ca. 20 min g-1 and stable cyclic operations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hydrophobic post-functionalization of a water instable bioMOF, Effect on CO2 and water adsorption

  • Rosado, Albert|||0000-0003-3222-9566
  • Borrás Caballero, Alejandro|||0000-0002-0725-421X
  • Suárez-García, Fabián|||0000-0002-1970-293X
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Ayllón, José A.|||0000-0001-7965-7424
  • Domingo, Concepción|||0000-0001-7857-2760
The preparation of highly porous metal organic frameworks (MOFs) chemically resistant to water is essential for the forthcoming use of these materials as adsorbents in applications of gas separation under moisture or for wastewater remediation. However, most of the synthesized MOFs have a framework with low thermodynamic stability against water. MOFs modification performed in this work aims to modify the water behavior by addressing kinetic factors affecting the dissolution reaction rate. For this purpose, a post-synthetic process is designed to functionalize MOF particles on the surface with a hydrophobic compound, particularly, stearic acid. The microporous bioMOF CaSyr-1, recently synthesized in our laboratories, was selected as a case study. Pristine CaSyr-1 transforms in water into a second crystalline phase, CaSyr-2 with a non-porous structure resolved in this work. An external surface coating method was chosen to prevent the bioMOF from water-induced degradation, while preserving the internal empty volume to a large extent, thus almost not affecting the adsorption capacity. The developed synthetic method allows the straightforward assembly of the composite CaSyr-1/stearate into a monolithic aerogel with a multimodal porosity. The significant enhancement of the kinetic stability of the hydrophobized CaSyr-1 with respect to the parent bioMOF was demonstrated by structural and morphological analysis. Textural properties and adsorption capacities of CaSyr-1/stearate were evaluated with different adsorbates, including N CO and HO. In particular, significant water adsorption was attained in the coated MOF without affecting the integrity of the framework. Besides, water adsorption works as an effective activation method for the composite by displacing stearic acid adsorbed inside CaSyr-1 pores. As a consequence, CO adsorption at room temperature in the water-activated sample was enhanced by a factor of two with respect to the vacuum-activated sample, reaching and uptake of 31 cm of CO per gram of adsorbent.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Green Supercritical CO2 Synthesis of [Copper Clusters@FeBTC]@rGO Catalyst for Highly Efficient Hydrogenation of CO2 to Methanol

  • Kubovics, Márta|||0000-0002-2441-8562
  • Borrás Caballero, Alejandro|||0000-0002-0725-421X
  • Abo Markeb, Ahmad|||0000-0003-4385-0198
  • Marbán, Gregorio|||0000-0002-8387-3282
  • Moral-Vico, Javier|||0000-0002-6795-3450
  • Sánchez, Antoni|||0000-0003-4254-8528
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Domingo, Concepción|||0000-0001-7857-2760
In the vast majority of studies, methanol production via CO hydrogenation is realized using bifunctional catalysts, commonly CuZnO phases. The basic motivation of this study is to confront main concerns regarding typical copper-based catalysts, which are the aggregation of the active metal nanoparticles (NPs) and its concomitant deactivation. For this, an extensive research on composites of mesoporous iron trimesate metal-organic frameworks (MOFs) [crystalline MIL-100(Fe) and semiamorphous FeBTC], loaded with copper clusters (CuCs) into the pores, is performed, because it is a pioneer in the area. The growth and aggregation of CuCs are hindered by the confinement of the active entities into the MOF mesocages. From the two studied MOFs, only the copper loaded semiamorphous FeBTC behaves as a catalyst. To further enhance the catalytic activity, CuCs@FeBTC NPs are dispersed on the plates constituting a reduced graphene-oxide aerogel. Main steps in the preparation of these complex catalysts involve the use of sustainable technology based on supercritical CO, used either as a solvent or drying agent. The reduction strategy designed to obtain the active catalyst (Cu to Cu/Cu in CuCs) was crucial to upgrade the end product performance. A double reduction route, applying ascorbic acid preceding thermal H reduction, turns out to be necessary to attain a significant catalytic activity of the confined Cu species. The as-synthesized and spent catalysts were analyzed in regard of the structure (X-ray diffraction, infrared), bulk (mass spectrometry) and surface (X-ray photoelectron spectroscopy) composition, morphology (microscopy and energy dispersive spectroscopy) and textural properties (N physisorption). The catalytic performance of reduced CuCs@FeBTC and [CuCs@FeBTC]@rGO composites was tested in the CO hydrogenation reaction at 10 bar. Methane and methanol were obtained as valuable reaction products. When using the [CuCs@FeBTC]@rGO aerogel, methanol yield was noticeably high, in comparison to reported data, in the order of 86 mgg h; while the amount of side products (methane, CO) was almost totally hindered up to 260 °C.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fully supercritical CO2 preparation of a nanostructured MOF composite with application in cutaneous drug delivery

  • Kubovics, Márta
  • Rojas, Sara
  • López Periago, Ana M.
  • Fraile, Julio
  • Horcajada, Patricia
  • Domingo Pascual, M. Concepción
Supercritical CO2 (scCO2) technology is used here as an efficient method to assist in the preparation of a cutaneous polymeric formulation based on drug containing metal-organic framework composites. The supercritical fluid is used in three steps: (i) as a drying agent for the nanosized mesoporous matrix, (ii) as the impregnation vector of a topical antibiotic drug, and (iii) as a plasticizing and foaming fluid to obtain dispersions of the hybrid material into a biocompatible polymer, e.g., the macroporous patch. The materials were characterized using solid state techniques. The drug delivery and permeation profiles of the patches were investigated applying in vitro and ex vivo tests by using porcine skin. These analyses suggest that scCO2 impregnation is an easy and fast strategy to prepare composite devices able to progressively release and diffuse the incorporated drug throughout the skin, paving the way to efficiently prepare cutaneous devices for topical or systemic therapies., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (CEX2019–000917-S) and the Spanish National Plan of Research with projects CTQ2017–83632 and PID2020–115631GB-I00 (Concepción Domingo, Ana M. López and Márta Kubovics). Sara Rojas and Patricia Horcajada acknowledge the regional Madrid founding (Talento 2017 Modality 2, 2017-T2/IND-5149), the MOFSEIDON project (PID2019–104228RB-I00, MCI/AEI/FEDER, UE), and the Multifunctional Metallodrugs in Diagnosis and Therapy Network (MICIU, RED2018–102471-T). Márta Kubovics acknowledge the financial support from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Cofund grant (agreement no MSCA-COFUND-DP/0320–754397). Patricia Horcajada acknowledges the Spanish Ramon y Cajal Programme (grant agreement no. 2014–16823). Sara Rojas acknowledges the Spanish Juan de la Cierva Incorporación Fellowship (grant agreement no. IJC2019–038894-I). This work has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona by Márta Kubovics., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The Role of Temperature on the Degree of End-Closing and Filling of Single-Walled Carbon Nanotubes

  • Kierkowicz, Magdalena
  • Pach, Elzbieta
  • Fraile, Julio
  • Domingo, Concepción
  • Ballesteros, Belén
  • Tobias, Gerard
This article belongs to the Special Issue Advanced Carbon Nanostructures: Synthesis, Properties and Applications, Carbon nanotubes (CNTs), owing to their high surface area-to-volume ratio and hollow core, can be employed as hosts for adsorbed and/or encapsulated molecules. At high temperatures, the ends of CNTs close spontaneously, which is relevant for several applications, including catalysis, gas storage, and biomedical imaging and therapy. This study highlights the influence of the annealing temperature in the range between 400 and 1100 °C on the structure and morphology of single-walled CNTs. The nitrogen adsorption and density functional theory calculations indicate that the fraction of end-closed CNTs increases with temperature. Raman spectroscopy reveals that the thermal treatment does not alter the tubular structure. Insight is also provided into the efficacy of CNTs filling from the molten phase, depending on the annealing temperature. The CNTs are filled with europium (III) chloride and analyzed by using electron microscopy (scanning electron microscopy and high-resolution transmission electron microscopy) and energy-dispersive X-ray spectroscopy, confirming the presence of filling and closed ends. The filling yield increases with temperature, as determined by thermogravimetric analysis. The obtained results show that the apparent surface area of CNTs, fraction of closed ends, and amount of encapsulated payload can be tailored via annealing., The research leading to these results has received funding from the Ministerio de Ciencia e Innovación (Spain) through the grants ECIME (PID2020-113805GB-I00 and PID2020-115631GB-I00) and from FP7 ITN project RADDEL (290023). ICMAB and ICN2 acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S and SEV-2017-0706 respectively). The APC was funded by CSIC and PID2020-113805GB-I00. ICN2 is funded by the CERCA programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Meso/microporous MOF@graphene oxide composite aerogels prepared by generic supercritical CO2 technology

  • Borrás, Alejandro
  • Rosado, Albert
  • Fraile, Julio
  • López Periago, Ana M.
  • Giner Planas, José
  • Yazdi, Amirali
  • Domingo Pascual, M. Concepción
The increasing complexity in composition and structure of modern porous nanocomposite materials requires the development of advanced technologies that allow the simultaneous treatment of dissimilar compounds, not only with unlike composition but also involving different classes of pores, e.g., micro and mesopores. This work shows that supercritical CO2 (scCO2) technology can be used as generic processing aid to obtain composites involving non-reduced graphene oxide (GO) and metal organic frameworks (MOFs) in the form of aerogels with hierarchical porosity. Hybrid aerogels are formed by either depositing (ex situ) or growing (in situ) MOF nanocrystals onto the surface of 2D GO nanosheets. The archetypal hydrophilic HKUST-1 and UiO-66 and hydrophobic ZIF-8 microporous MOFs are chosen to exemplify the method possibilities. The ex situ route was adequate to prepare hydrophilic MOFs@GO homogeneous composites, while the in situ approach must be used to prepare hydrophobic MOFs@GO aerogels. Moreover, the scCO2 methodology should be adjusted for each studied MOF in regard of the organic solvent used to disperse the nanoentities constituting the composite. The end-products are obtained in the form of aerogels mimicking the shape of the recipient in which they are contained. The products are characterized in regard of structure by X-ray diffraction, textural properties by low temperature N2 adsorption/desorption and morphology by electronic microscopy., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (SEV-2015-0496 and CEX2019-000917-S) and the Spanish National Plan of Research with projects CTQ2017-83632, PID2020-115631GB-I00. This work has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona by A.B., A.R. and J.F.; A.B. and A.R. acknowledge FPI grants., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Supramolecular Isomerism in Cobalt(II) Coordination Polymers Built from 3,5-Bis(trifluoromethyl)benzoate and 4,4′-Bipyridine

  • Papi, Francesco
  • Rosado, Albert
  • Vallcorba, Oriol
  • Lanza, Arianna E.
  • Gemmi, Mauro
  • Portolés Gil, Núria
  • López Periago, Ana M.
  • Domingo Pascual, M. Concepción
  • Ayllón, José A.
The reaction of [Co2(H2O)(TFMBz)4(py)4] (1) (TFMBz: 3,5-bis(trifluoromethyl)benzoate; py: pyridine) with 4,4′-bipyridine (bpy) in different solvents yields four coordination polymers with unlikely structures but with the same stoichiometry. Three of them contain similar ladder chains consisting of binuclear nodes "Co2(TFMBz)4", in which two of the TFMBz ligands show bidentate bridge coordination, double linked to each adjacent node by bpy but packed in different fashions. The different packing affects the compound porosity; thus, [Co2(TFMBz)4(bpy)2]n(2), precipitated using low-polarity solvents such as supercritical CO2(scCO2), n-butyl acetate, or heptane and also in acetonitrile, is microporous, with a surface area of 330 m2g-1, showing the N2adsorption/desorption isotherm at 77 K with a gate-opening effect at low relative pressures (P/P0= 0.05). The isomer [Co2(TFMBz)4(bpy)2]n(3), synthesized in ethoxyethanol, presents a surface area of 230 m2g-1. A third chain packing isomer, [Co2(TFMBz)4(bpy)2]n(4), is obtained in acetone and has only non-interconnected voids. Finally, precursor 1 is combined with bpy in a highly polar solvent such as water to give [Co(TFMBz)2(bpy)]n(5). In this isomer, all the carboxylate units act as bidentate bridging ligands, generating chains that are interlinked by bpy, leading to a 2D network, which after packing yields a non-porous structure. The resolution of structures 2-5 is only possible with the recently developed 3D electron diffraction method based on the collection of diffraction patterns on sub-micron-sized single crystals. The variation of magnetic susceptibility as a function of temperature is also measured. Overall, our work provides insightful information on the complex landscape of metal-organic framework solids that are formed by crystallization using different solvent media., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S) and the Spanish National Plan of Research with projects PID2020-115631GB-I00. F.P., A.E.L., and M.G. would like to thank Regione Toscana for funding the purchase of the ASI MEDIPIX detector through the FELIX project (POR CREO FERS 2014–2020). The measures for the elucidation of the crystal structure of compound 1 were performed at the XALOC beamline at ALBA Synchrotron with the collaboration of ALBA staff., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene Oxide/Polyethylenimine Aerogels for the Removal of Hg(II) from Water

  • Borrás, Alejandro
  • Henriques, Bruno
  • Gonçalves, Gil
  • Fraile, Julio
  • Pereira, Eduarda
  • López Periago, Ana M.
  • Domingo Pascual, M. Concepción
This article reports the synthesis of an aerogel involving reduced graphene oxide (rGO) and polyethylenimine (PEI), and describes its potential application as an effective sorbent to treat Hg(II) contaminated water. The rGO/PEI sorbent was synthetized using a supercritical CO2 method. N2 physisorption, electron microscopy, and elemental mapping were applied to visualize the meso/macroporous morphology formed by the supercritical drying. The advantages of the synthetized materials are highlighted with respect to the larger exposed GO surface for the PEI grafting of aerogels vs. cryogels, homogeneous distribution of the nitrogenated amino groups in the former and, finally, high Hg(II) sorption capacities. Sorption tests were performed starting from water solutions involving traces of Hg(II). Even though, the designed sorbent was able to eliminate almost all of the metal from the water phase, attaining in very short periods of time residual Hg(II) values as low as 3.5 µg L-1, which is close to the legal limits of drinking water of 1-2 µg L-1. rGO/PEI exhibited a remarkably high value for the maximum sorption capacity of Hg(II), in the order of 219 mg g-1. All of these factors indicate that the designed rGO/PEI aerogel can be considered as a promising candidate to treat Hg(II) contaminated wastewater., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (CEX2019–000917-S) and the Spanish National Plan of Research with project PID2020–115631GB-I00. A.B. acknowledges the financial support of the FPI Spanish grant BES-2017-081148, and from the European Union’s Horizon 2020 research and innovation program under the COST action Greenering (CA18224). G. Gonçalves and B. Henriques thank the Fundação para a Ciência e Tecnologia (FCT) for the Program Stimulus of Scientific Employment􀀀Individual Support (CEECIND/01913/2017 and CEECIND/03511/2018, respectively). The financial support of TEMA through the projects UIDB/00481/2020 and UIDP/00481/2020 and of REQUIMTE by the project UIDB/50006/2020 from FCT and CENTRO-01-0145-FEDER-022083— Centro Portugal Regional Operational Programme (Centro 2020), under the PORTUGAL 2020 Partnership Agreement, through the European Regional Development Fund., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Role of Graphene Oxide Aerogel Support on the CuZnO Catalytic Activity: Enhancing Methanol Selectivity in the Hydrogenation Reaction of CO2

  • Kubovics, Márta
  • Trigo, Albert
  • Sánchez, Antoni
  • Marbán Calzón, Gregorio
  • Borrás, Alejandro
  • Moral Vico, Javier
  • López Periago, Ana M.
  • Domingo Pascual, M. Concepción
A novel CuZnO multicomponent catalyst, involving reduced graphene oxide (rGO) as a support, was synthesized to be applied in the catalytic hydrogenation of CO2 to methanol. The CuZnO@rGO composite was prepared as a 3D aerogel by a two-step process involving supercritical CO2 for macrostructuration and H2 treatment for reduction. Electron microscopy was applied to visualize the meso/macroporous morphology formed by the supercritical drying. The elemental mapping depicted a homogenous distribution of CuZnO nanoparticles deposited on the rGO flakes. It was demonstrated that methanol production increases for the CuZnO@rGO composite in comparison to unsupported similar CuZnO nanoparticles. This behavior was ascribed to a different interaction established between the Cu0 and ZnO nanoparticles used as synthetized or deposited on rGO. It is shown that the highly reduced rGO component stimulates H2O desorption produced during the hydrogenation reaction, thus it serves as a support hindering the sintering of Cu0 nanoparticles. The formation of a diluted surface alloy of Zn into Cu0 was determined for the unsupported CuZnO NPs, while for the CuZnO@rGO aerogel composite, the absence of any additional phase, e. g., a surface alloy or reduced ZnO, was confirmed. The composite aerogels show excellent MeOH selectivity at high temperature (up to 260 °C) and low pressure (10 bar)., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S) and the Spanish National Plan of Research with project PID2020-115631GB-I00. Catalytic experiments were funded by the Ramón Areces foundation, in the hallmark of the META2NOL project granted in the XIX national contest of life and matter sciences projects. Márta Kubovics acknowledge the financial support from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Cofund grant (agreement no MSCA-COFUND-DP/0320-754397). This work has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona by Márta Kubovics., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One-dimensional metal–organic frameworks built by coordinating 2,4,6-tris(4-pyridyl)-1,3,5-triazine linker with copper nodes: CO2 adsorption properties

  • Portolés Gil, Núria
  • Vallcorba, Oriol
  • Fraile, Julio
  • López Periago, Ana M.
  • Domingo Pascual, M. Concepción
  • Ayllón, José A.
The reaction between 2,4,6-tris(4-pyridyl)-1,3,5-triazine (4-tpt) and copper(II) hexafluoroacetylacetone (Cu(hfa)2) yields two different 1D metal–organic frameworks (MOFs), [(Cu(hfa)2)2(4-tpt)]n (1) and [Cu(hfa)2(4-tpt)]n (2). The Cu:4-tpt ratio in the new MOFs is determined by the reaction medium, particularly, the solvent used. The two compounds have been fully characterized, including crystal structure elucidation. [(Cu(hfa)2)2(4-tpt)]n (1), with a 2:1 Cu:4-tpt ratio, could be precipitated in either 1,1,2-trichloroethane or supercritical CO2. In (1), 4-tpt shows a tritopic coordination mode, but only half of the Cu(hfa)2 subunits act as a node, thus connecting two 4-tpt and giving a 1D network. The other half of Cu(hfa)2 subunits are connected only to one pyridine and thus protrude along the chains. The later Cu(hfa)2 fragments show a labile character and can be dissolved in diethyl ether to give the second MOF [Cu(hfa)2(4-tpt)]n (2), with a 1:1 Cu:4-tpt ratio. The compound (2) has also a 1D structure, with all the incorporated copper atoms acting as nodes. In this case, the packing of the chains defines accessible channels, which are perpendicular to the chain axis. After activation, N2 adsorption/desorption measurements at 77 K confirm the microporous character of (2) with an apparent surface area of 190 m2 g−1. Besides, at 273 K this material clearly shows a significant adsorption of CO2 prompted by noncoordinated nitrogen in the triazine linker., This work was supported by the Spanish Ministry of Science and Innovation (MICINN) through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S) and the Spanish National Plan of Research with project PID2020-115631GB-I00. The measures for the elucidation of the crystal structures were performed at MSPD and XALOC beamlines at ALBA Synchrotron with the collaboration of ALBA staff., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photocatalytic Hydrogen Production using Porous 3D Graphene-Based Aerogels Supporting Pt/TiO2 Nanoparticles

  • Kubovics, Márta
  • Silva, Cláudia G.
  • López Periago, Ana M.
  • Faria, Joaquim L.
  • Domingo Pascual, M. Concepción
Composites involving reduced graphene oxide (rGO) aerogels supporting Pt/TiO2 nanoparticles were fabricated using a one-pot supercritical CO2 gelling and drying method, followed by mild reduction under a N2 atmosphere. Electron microscopy images and N2 adsorption/desorption isotherms indicate the formation of 3D monolithic aerogels with a meso/macroporous morphology. A comprehensive evaluation of the synthesized photocatalyst was carried out with a focus on the target application: the photocatalytic production of H2 from methanol in aqueous media. The reaction conditions (water/methanol ratio, catalyst concentration), together with the aerogel composition (Pt/TiO2/rGO ratio) and architecture (size of the aerogel pieces), were the factors that varied in optimizing the process. These experimental parameters influenced the diffusion of the reactants/products inside the aerogel, the permeability of the porous structure, and the light-harvesting properties, all determined in this study towards maximizing H2 production. Using methanol as the sacrificial agent, the measured H2 production rate for the optimized system (18,800 µmolH2h-1gNPs-1) was remarkably higher than the values found in the literature for similar Pt/TiO2/rGO catalysts and reaction media (2000-10,000 µmolH2h-1gNPs-1)., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (CEX2019–000917-S) and the Spanish National Plan of Research with project PID2020–115631GB-I00. We would like to thank the scientific collaboration under LA/P/0045/2020 (ALiCE), UIDB/50020/2020, and UIDP/50020/2020 (LSRE-LCM), financed by national funds through FCT/MCTES (PIDDAC). Márta Kubovics acknowledges the financial support from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Cofund grant (agreement no MSCA-COFUND-DP/0320-754397) and the Short Term Scientific Mission (STSM) from the Greenering network by the COST Association. This work has been performed in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona by Márta Kubovics., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Supercritical CO2 Synthesis of Porous Metalloporphyrin Frameworks: Application in Photodynamic Therapy

  • Kubovics, Márta
  • Careta, Oriol
  • Vallcorba, Oriol
  • Romo Islas, Guillermo
  • Rodríguez, Laura
  • Ayllón, Jose A.
  • Domingo Pascual, M. Concepción
  • Nogués, Carme
  • López Periago, Ana M.
A series of porous metalloporphyrin frameworks prepared from the 5,10,15,20-tetra(4-pyridyl)porphyrin (H2TPyP) linker and four metal complexes, M(hfac)2 M = Cu(II), Zn(II), Co(II), and Ni(II) (hfac: 1,1,1,5,5,5-hexafluoroacetylacetonate), were obtained using supercritical CO2 (scCO2) as a solvent. All the materials, named generically as [M-TPyP]n, formed porous metal-organic frameworks (MOFs), with surface areas of ∼450 m2 g-1. All MOFs were formed through the coordination of the metal to the exocyclic pyridine moieties in the porphyrin linker. For Cu(II), Zn(II), and Co(II), incomplete metal coordination of the inner pyrrole ring throughout the structure was observed, giving place to MOFs with substitutional defects and leading to a certain level of disorder and limited crystallinity. These samples, prepared using scCO2, were precipitated as nano- to micrometric powders. Separately, a layering technique from a mixture of organic solvents was used to crystallize high-quality crystals of the Co(II) based MOF, obtained with the formula [{Co(hfac)2}2H2TPyP]n. The crystal structure of this MOF was elucidated by single-crystal synchrotron X-ray diffraction. The Zn(II)-based MOF was selected as a potential photodynamic therapy drug in the SKBR-3 tumoral cell line showing outstanding performance. This MOF resulted to be nontoxic, but after 15 min of irradiation at 630 nm, using either 1 or 5 μM concentration of the product, almost 70% of tumor cells died after 72 h., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centres of Excellence (CEX2019-000917-S) and the Spanish National Plan of Research with projects PID2020-115631GB-I00 (C.D., A.M.L.-P., and M.K.), PID2020-116844RB-C21, and 2017SGR503-Generalitat de Catalunya (C.N. and O.C) and PID2019-104121GB-I00 (G. R.-I. and L.R.)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Intrinsic Permeation and Anti-Inflammatory Evaluation of Curcumin, Bisdemethoxycurcumin and Bisdemethylcurcumin by a Validated HPLC-UV Method

  • Alvarado, Helen-Lissette
  • Limón, David
  • Calpena-Campmany, Ana Cristina
  • Mallandrich, Mireia
  • Rodríguez Cid, Laura
  • Aliaga Alcalde, Nuria
  • González Campo, Arántzazu
  • Pérez-García, Lluïsa
Curcumin shows anti-inflammatory activity, and it has been widely investigated for neurodegenerative diseases, adjuvant treatment in AIDS and antitumor activity against different tumors, among other activities. The goal of this work was to evaluate the capacity of curcumin and its derivatives (bisdemethoxycurcumin and bisdemethylcurcumin) in preventing the irritant effects of topically applied xylol and to assess the intrinsic capacity of curcuminoids in permeating human skin by ex vivo permeation tests. Its secondary goal was to validate an HPLC method to simultaneously determine the curcuminoids in the samples from the ex vivo permeation studies and drug extraction from the skin. Curcuminoid quantification was performed using an RP-C18 column, at isocratic conditions of elution and a detection wavelength of 265 nm. The method was specific with a suitable peak resolution, as well as linear, precise, and accurate in the range of 0.195–3.125 μg/mL for the three curcuminoids. Bisdemethylcurcumin showed the greatest permeation through the human skin, and it was the curcuminoid that was most retained within the human skin. The anti-inflammatory activity of the curcuminoids was evaluated in vivo using a xylol-induced inflammation model in rats. Histological studies were performed to observe any changes in morphology at the microscopic level, and these three curcuminoids were found to be respectful within the skin structure. These results show that these three curcuminoids are suitable for anti-inflammatory formulations for dermal applications, and they can be properly quantified using HPLC-UV., This research was funded by AGAUR, grant number 2017SGR1277. This work was supported by the projects PID2020-115663GB-C3-2, PID2019-108794GB-I00 and PID2020–115631GB-I00 funded by MCIN/AEI/10.13039/501100011033 from the Ministerio de Ciencia e Innovación. AGC and NAA thank the financial support from the Spanish Ministry Science, through the “Severo Ochoa” Programme for Centres of Excellence (FUNFUTURE) (2020-2023). AGC also thanks for the Ramon y Cajal Grant (RYC-2017-22910). The authors also thank Universitat de Barcelona for the financial support for the Open Access publication., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX-2019-000917-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Examining the adsorption of gases into solid crystalline molecular copper(II) 3,5-bis(trifluoromethyl)benzoate derivatives

  • Vallcorba, Oriol
  • Fraile, Julio
  • Domingo Pascual, M. Concepción
  • Ayllón, José A.
Two copper(II) complexes, both involving the anionic 3,5-bis(trifluoromethyl)benzoate ligand (TFMBz), have been prepared and their structure elucidated by single crystal-X ray diffraction. [Cu(TFMBz)2(ISNA)2] (1) is a mononuclear complex, in which the sphere of coordination of Cu(II) is completed by two neutral isonicotinamide (ISNA) auxiliary ligands. Hydrogen bonding formed between auxiliary ISNA ligands determines the formation of a 2D supramolecular network. [Cu2(TFMBz)4(DMSO)2] (2) is a binuclear complex, in which the four carboxylate ligands define the typical paddle wheel structure often found in copper complexes, containing also the ancillary dimethyl sulfoxide (DMSO) ligand in axial positions. The elucidated crystallographic data provide the static view of the crystal structures, which reveals only non-interconnected voids for both materials. Even that, compound 1 shows an appreciable adsorption of CO2 at 273 K (ca. 1 CO2 molecule/Cu atom at 100 kPa), concomitant with a reduced adsorption of Ar or N2 under similar conditions, which implies a considerable degree of selectivity for CO2. Moreover, 1 does not adsorb N2 or Ar at 77 K and 100 kPa. This behavior suggests that the stablished intermolecular hydrogen bonds rest flexibility and dynamism to 1 at low temperature. Contrarily, increasing the temperature transient porosity is originated, which allows guest molecules to diffuse through the cavities. Compound 2 shows adsorption of N2 and Ar at 77 K, indicating that vibrations in the network and rotation of some CF3 groups, necessary to favor adsorbate diffusion, are still feasible at this low temperature., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S) and the Spanish National Plan of Research with project PID2020-115631 GB-I00. The measurements for the elucidation of the crystal structures and SPXRD patterns were performed at the XALOC and NOTOS beamlines of the ALBA Synchrotron, respectively, with the collaboration of ALBA staff., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solvent Influence in the Synthesis of Lead(II) Complexes Containing Benzoate Derivatives

  • Ayllón, José A.
  • Vallcorba, Oriol
  • Domingo, Concepción
A series of lead(II) complexes incorporating benzoate derivative ligands was prepared: [Pb(2MeOBz)2]n (1), [Pb(2MeOBz)2(H2O)]n (2), [Pb2(1,4Bzdiox)4(DMSO)]n (3), [Pb(1,4Bzdiox)2(H2O)]n (4), [Pb(Pip)2(H2O)]n (5), and [Pb(Ac)(Pip)2(MeOH)]n (6) (2MeOBz: 2-methoxybenzoate; 1,4Bzdiox: 1,4-benzodioxan-5-carboxylate; DMSO: dimethylsulfoxide; Ac: acetate; Pip: piperonylate; MeOH: methanol). All compounds were characterized via elemental analysis, ATR-FTIR spectroscopy, and powder XRD. In addition, the crystal structures of some compounds were elucidated. Compounds 1 and 2, involving 2-methoxybenzoate, were closely related, only differing in the presence of one extra aqua ligand found for the latter. However, this implies key changes in the studied properties, e.g., 2 shows solid-state luminescence that displays a different color as a function of the crystal orientation, while 1 does not. The crystal structure of 2 revealed a 1D coordination polymer. A similar relationship was found between compounds 3 and 4, incorporating 1,4-benzodioxan-5-carboxylate. In this pair, only 4, with aqua ligands, displayed a greenish-yellow-color solid-state luminescence. Furthermore, two new lead(II) piperonylate complexes, 5 and 6, were obtained from the reaction between lead(II) acetate and piperonylic acid. In water, all acetate ligands in the metal precursor were displaced and [Pb(Pip)2(H2O)]n (5) was isolated, while in methanol, a mixed acetate–piperonylate complex, [Pb(Ac)(Pip)2(MeOH)]n (6), was precipitated. Considering only conventional Pb-O bonds, the crystal structure of 6 was described as a 1D coordination polymer, although, additionally, the chains were associated via tetrel bonds, defining an extended 2D architecture., This research was funded by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S) and the Spanish National Plan of Research with project PID2020-115631 GB-I00., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multifunctionalized zirconium-based MOF as a novel support for dispersed copper: application in CO2 adsorption and catalytic conversion

  • Rosado, Albert
  • Popa, Ioana-Maria
  • Markeb, Ahmad Abo
  • Moral Vico, Javier
  • Naughton, Eva Maria
  • Eckhardt, Hans-Georg
  • Ayllón, Jose A.
  • López Periago, Ana M.
  • Domingo Pascual, M. Concepción
  • Negahdar, Leila
CO2 conversion and utilization for global sustainability is an integral part of greenhouse gases management, typically for the production of fuels and specialty chemicals. Added value products, such as methanol, methane or formate, can be obtained by electrocatalysis and thermocatalysis, the two techniques addressed in this study. The main motivation of this study is to develop a copper based catalyst active in both processes, confronting the main concerns regarding typical metal catalysts related to nanoparticles aggregation and concomitant deactivation. For this, modified NU-1000, a water-stable mesoporous MOF, is used as a platform for the simultaneous coordination-stabilization of copper single atoms and CO2 adsorption. NU-1000 is synthetized with primary amino groups (-NH2 with affinity for CO2) by modifying the ligand prior to MOF synthesis, while post-synthetic solvent-assisted ligand incorporation is applied to insert thiol functionalities (-SH with affinity for copper) within the framework. To make the functionalized MOF catalytically active, a Cu2+ salt is impregnated into the MOF channels, which is further reduced with H-2 to Cu+/Cu-0 before performance assessment in CO2 conversion processes. The as-synthetized and spent catalysts were analysed regarding the structure (X-ray diffraction, infrared), bulk (mass spectrometry) and surface (X-ray photoelectron spectroscopy) composition, morphology (electronic microscopy and energy dispersive spectroscopy) and textural properties (N-2 physisorption). The electrocatalytic reduction of CO2 was performed in the potential range of -0.8 to -1.8 V, indicating the formation of formic acid. Thermocatalytic experiments were carried out in an economically and energetically sustainable low-pressure (1 MPa) hydrogenation process. Methanol was obtained with 100% selectivity at temperatures up to 280 degrees C, and a space-time yield of ca. 100 mg(MeOH) g(cat)(-1) h(-1) which overcomes that of commercial CuZnO NPs designed for this purpose., The UCD school of chemistry is acknowledged for financial support. The authors acknowledge the support of Spanish Ministry of Science and Innovation through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S), the Spanish National Plan of Research with project PID2020-115631GB-I00 and Ecological Transition and Digital Transition Projects TED2021-1298378-C41 and TED2021-130407B-I00. A. A. Markeb is the recipient of a postdoctoral fellowship from the Spanish Ministerio de Universidades, María Zambrano ID 715364. This work has been performed in the framework of the doctoral program “Chemistry” of the UAB by A.R. that acknowledges the financial support of a FPI 2019 grant., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

BioMOF@cellulose Glycerogel Scaffold with Multifold Bioactivity: Perspective in Bone Tissue Repair

  • Rosado, Albert
  • Borrás, Alejandro
  • Sánchez-Soto, Miguel
  • Labíková, Magdaléna
  • Hettegger, Hubert
  • Ramírez-Jiménez, Rosa Ana
  • Rojo, Luis
  • García-Fernández, Luis
  • Aguilar, María Rosa
  • Liebner,Falk
  • López Periago, Ana M.
  • Ayllón, José A.
  • Domingo, Concepción
The development of new biomaterials for musculoskeletal tissue repair is currently an important branch in biomedicine research. The approach presented here is centered around the de- velopment of a prototypic synthetic glycerogel scaffold for bone regeneration, which simultane- ously features therapeutic activity. The main novelty of this work lies in the combination of an open meso and macroporous nanocrystalline cellulose (NCC)-based glycerogel with a fully biocompati- ble microporous bioMOF system (CaSyr-1) composed of calcium ions and syringic acid. The bio- MOF framework is further impregnated with a third bioactive component, i.e., ibuprofen (ibu), to generate a multifold bioactive system. The integrated CaSyr-1(ibu) serves as a reservoir for bioactive compounds delivery, while the NCC scaffold is the proposed matrix for cell ingrowth, proliferation and differentiation. The measured drug delivery profiles, studied in a phosphate-buffered saline solution at 310 K, indicate that the bioactive components are released concurrently with bioMOF dissolution after ca. 30 min following a pseudo-first-order kinetic model. Furthermore, according to the semi-empirical Korsmeyer-Peppas kinetic model, this release is governed by a case-II mecha- nism, suggesting that the molecular transport is influenced by the relaxation of the NCC matrix. Preliminary in vitro results denote that the initial high concentration of glycerol in the NCC scaffold can be toxic in direct contact with human osteoblasts (HObs). However, when the excess of glycerol is diluted in the system (after the second day of the experiment), the direct and indirect assays con- firm full biocompatibility and suitability for HOb proliferation., This work was funded by the Spanish Ministry of Science and Innovation (MICINN) through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S) with the Spanish National Plan of Research projects PID2020-115631GB-I00, PID2020-114086RB-I00 and PID2019- 106518RB-I00, and also CIBER (Spain)—Consorcio Centro de Investigación Biomédica en Red (CB06/01/0013), Instituto de Salud Carlos III. This research work was performed in the framework of the Nanomedicine CSIC HUB (202180E048). Furthermore, financial support through the Aus- trian-Czech Project CZ 17/2023 (M.L., H.H.), funded by the Austrian Agency for Education and In- ternationalisation (OeAD), is thankfully acknowledged. M.S.-S. thanks the Generalitat de Catalunya for the grant 2021SGR01042. This work has been performed in the framework of the doctoral pro- gram “Chemistry” of the UAB by A.R. that acknowledges the financial support of a FPI 2019 grant and AERoGELS Cost Action (CA18125) with regards to a Short-Term Scientific Mission (STSM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Green Supercritical CO2 Synthesis of [Copper Clusters@FeBTC]@rGO Catalyst for Highly Efficient Hydrogenation of CO2 to Methanol

  • Kubovics, Márta
  • Borrás, Alejandro
  • Markeb, Ahmad Abo
  • Marbán Calzón, Gregorio
  • Moral Vico, Javier
  • Sánchez, Antoni
  • López Periago, Ana M.
  • Domingo Pascual, M. Concepción
In the vast majority of studies, methanol production via CO2 hydrogenation is realized using bifunctional catalysts, commonly CuZnO phases. The basic motivation of this study is to confront main concerns regarding typical copper-based catalysts, which are the aggregation of the active metal nanoparticles (NPs) and its concomitant deactivation. For this, an extensive research on composites of mesoporous iron trimesate metal-organic frameworks (MOFs) [crystalline MIL-100(Fe) and semiamorphous FeBTC], loaded with copper clusters (CuCs) into the pores, is performed, because it is a pioneer in the area. The growth and aggregation of CuCs are hindered by the confinement of the active entities into the MOF mesocages. From the two studied MOFs, only the copper loaded semiamorphous FeBTC behaves as a catalyst. To further enhance the catalytic activity, CuCs@FeBTC NPs are dispersed on the plates constituting a reduced graphene-oxide aerogel. Main steps in the preparation of these complex catalysts involve the use of sustainable technology based on supercritical CO2, used either as a solvent or drying agent. The reduction strategy designed to obtain the active catalyst (Cu2+ to Cu+/Cu0 in CuCs) was crucial to upgrade the end product performance. A double reduction route, applying ascorbic acid preceding thermal H2 reduction, turns out to be necessary to attain a significant catalytic activity of the confined Cu2+ species. The as-synthesized and spent catalysts were analyzed in regard of the structure (X-ray diffraction, infrared), bulk (mass spectrometry) and surface (X-ray photoelectron spectroscopy) composition, morphology (microscopy and energy dispersive spectroscopy) and textural properties (N2 physisorption). The catalytic performance of reduced CuCs@FeBTC and [CuCs@FeBTC]@rGO composites was tested in the CO2 hydrogenation reaction at 10 bar. Methane and methanol were obtained as valuable reaction products. When using the [CuCs@FeBTC]@rGO aerogel, methanol yield was noticeably high, in comparison to reported data, in the order of 86 mgMeOHgCu-1 h-1; while the amount of side products (methane, CO) was almost totally hindered up to 260 °C., This work was supported by the Spanish Ministry of Science and Innovation through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S), the Spanish National Plan of Research with project PID2020-115631GB-I00 and Ecological Transition and Digital Transition Projects TED2021-1298378-C41 and TED2021-130407B-I00. A.M.L., C.D. and M.K. acknowledge the financial support of the CSIC platform SusPlast 20219PT059. G.M.́M. acknowledges the financial support provided by Principado de Asturias (IDI/2021/000096). A. A. Markeb is the recipient of a postdoctoral fellowship from the Spanish Ministerio de Universidades, María Zambrano ID 715364., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Supercritical CO2 assisted bioMOF drug encapsulation and functionalization for delivery with a synergetic therapeutic value

  • Rosado, Albert
  • García-Fernández, Luis
  • Aguilar, María Rosa
  • Ramírez-Jiménez, Rosa Ana
  • López Periago, Ana M.
  • Ayllón, José A.
  • Doming, Concepción
Despite the impressive characteristics of biological metal organic frameworks (bioMOFs) for their use as drug delivery systems (DDs), there are still some parameters related to their structural stability and processing routes that have decelerated their realistic application in this field. Both drawbacks are unraveled in this work for the microporous bioMOF CaSyr-1 by using supercritical CO2 (scCO2) to load the bioMOF with the anti-tubercular isoniazid (INH) drug, and functionalize its external surface with a hydrophobic protective layer of stearate (S). The hydrophobicized CaSyr-1(INH)/S vehicle is further coated with a neutral surfactant (PS60) to enhance the wettability of the system. In vitro tests, related to drug carrier biocompatibility and drug release in body simulated fluids, are performed to demonstrate potential prospective of the designed DDs in pharmacy. The synthetized product displayed total biocompatibility even at high concentrations, and the particle size and dissolution rate showed to be adequate for pulmonary administration., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (CEX2023–001263-S), by the Spanish National Plan of Research with projects PID2020–115631GB-I00 and PID2020–114086RB-100, and by CIBER (Spain) - Consorcio Centro de Investigación Biomédica en Red (Ref. CB06/01/0013), Instituto de Salud Carlos III. This research work was performed in the framework of the Nanomedicine CSIC HUB (Ref. 202180E048). A.R. acknowledges the financial support of FPI 2019 grant. This work has been performed in the framework of the doctoral program “Chemistry” of the Universitat Autónoma de Barcelona by A. R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydrophobic post-functionalization of a water instable bioMOF: Effect on CO2 and water adsorption

  • Rosado, Albert
  • Borrás, Alejandro
  • Suárez García, Fabián
  • Vallcorba, Oriol
  • López Periago, Ana M.
  • Ayllón, José A.
  • Domingo Pascual, M. Concepción
The preparation of highly porous metal organic frameworks (MOFs) chemically resistant to water is essential for the forthcoming use of these materials as adsorbents in applications of gas separation under moisture or for wastewater remediation. However, most of the synthesized MOFs have a framework with low thermodynamic stability against water. MOFs modification performed in this work aims to modify the water behavior by addressing kinetic factors affecting the dissolution reaction rate. For this purpose, a post-synthetic process is designed to functionalize MOF particles on the surface with a hydrophobic compound, particularly, stearic acid. The microporous bioMOF CaSyr-1, recently synthesized in our laboratories, was selected as a case study. Pristine CaSyr-1 transforms in water into a second crystalline phase, CaSyr-2 with a non-porous structure resolved in this work. An external surface coating method was chosen to prevent the bioMOF from water-induced degradation, while preserving the internal empty volume to a large extent, thus almost not affecting the adsorption capacity. The developed synthetic method allows the straightforward assembly of the composite CaSyr-1/stearate into a monolithic aerogel with a multimodal porosity. The significant enhancement of the kinetic stability of the hydrophobized CaSyr-1 with respect to the parent bioMOF was demonstrated by structural and morphological analysis. Textural properties and adsorption capacities of CaSyr-1/stearate were evaluated with different adsorbates, including N<inf>2,</inf> CO<inf>2</inf> and H<inf>2</inf>O. In particular, significant water adsorption was attained in the coated MOF without affecting the integrity of the framework. Besides, water adsorption works as an effective activation method for the composite by displacing stearic acid adsorbed inside CaSyr-1 pores. As a consequence, CO<inf>2</inf> adsorption at room temperature in the water-activated sample was enhanced by a factor of two with respect to the vacuum-activated sample, reaching and uptake of 31 cm<sup>3</sup> of CO<inf>2</inf> per gram of adsorbent., This work was supported by the Spanish Ministry of Science and Innovation through the Severo Ochoa Program for Centers of Excellence (CEX2023–001263-S), the Spanish National Plan of Research with project PID2020-115631GB-I00 and Ecological Transition and Digital Transition Project TED2021-1298378-C41. This work has been performed in the framework of the doctoral program “Chemistry” of the UAB by A.R. that acknowledges the financial support of an FPI 2019 grant. We acknowledge the thorough language and text revision performed by Rosy Sunday., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Supramolecular Isomerism in Cobalt(II) Coordination Polymers Built from 3,5-Bis(trifluoromethyl)benzoate and 4,4'-Bipyridine

  • Papi, Franscesco
  • Rosado, Albert|||0000-0003-3222-9566
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Lanza, Arianna
  • Gemmi, Mauro|||0000-0001-9542-3783
  • Portoles-Gil, Nuria|||0000-0002-2580-4641
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Domingo, Concepción|||0000-0001-7857-2760
  • Ayllón, José A.|||0000-0001-7965-7424
The reaction of [Co2(H2O)(TFMBz)4(py)4] (1) (TFMBz: 3,5-bis(trifluoromethyl)benzoate; py: pyridine) with 4,4'-bipyridine (bpy) in different solvents yields four coordination polymers with unlikely structures but with the same stoichiometry. Three of them contain similar ladder chains consisting of binuclear nodes "Co2(TFMBz)4", in which two of the TFMBz ligands show bidentate bridge coordination, double linked to each adjacent node by bpy but packed in different fashions. The different packing affects the compound porosity; thus, [Co2(TFMBz)4(bpy)2]n (2), precipitated using low-polarity solvents such as supercritical CO2 (scCO2), n-butyl acetate, or heptane and also in acetonitrile, is microporous, with a surface area of 330 m2 g-1, showing the N2 adsorption/desorption isotherm at 77 K with a gate-opening effect at low relative pressures (P/P0 = 0.05). The isomer [Co2(TFMBz)4(bpy)2]n (3), synthesized in ethoxyethanol, presents a surface area of 230 m2 g-1. A third chain packing isomer, [Co2(TFMBz)4(bpy)2]n (4), is obtained in acetone and has only non-interconnected voids. Finally, precursor 1 is combined with bpy in a highly polar solvent such as water to give [Co(TFMBz)2(bpy)]n (5). In this isomer, all the carboxylate units act as bidentate bridging ligands, generating chains that are interlinked by bpy, leading to a 2D network, which after packing yields a non-porous structure. The resolution of structures 2-5 is only possible with the recently developed 3D electron diffraction method based on the collection of diffraction patterns on sub-micron-sized single crystals. The variation of magnetic susceptibility as a function of temperature is also measured. Overall, our work provides insightful information on the complex landscape of metal-organic framework solids that are formed by crystallization using different solvent media.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The Role of Temperature on the Degree of End-Closing and Filling of Single-Walled Carbon Nanotubes

  • Kierkowicz, Magdalena
  • Pach, Elzbieta|||0000-0001-9587-3768
  • Fraile, Julio|||0000-0003-2961-7920
  • Domingo, Concepción|||0000-0001-7857-2760
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Tobias, Gerard|||0000-0001-7116-2152
Carbon nanotubes (CNTs), owing to their high surface area-to-volume ratio and hollow core, can be employed as hosts for adsorbed and/or encapsulated molecules. At high temperatures, the ends of CNTs close spontaneously, which is relevant for several applications, including catalysis, gas storage, and biomedical imaging and therapy. This study highlights the influence of the annealing temperature in the range between 400 and 1100 °C on the structure and morphology of single-walled CNTs. The nitrogen adsorption and density functional theory calculations indicate that the fraction of end-closed CNTs increases with temperature. Raman spectroscopy reveals that the thermal treatment does not alter the tubular structure. Insight is also provided into the efficacy of CNTs filling from the molten phase, depending on the annealing temperature. The CNTs are filled with europium (III) chloride and analyzed by using electron microscopy (scanning electron microscopy and high-resolution transmission electron microscopy) and energy-dispersive X-ray spectroscopy, confirming the presence of filling and closed ends. The filling yield increases with temperature, as determined by thermogravimetric analysis. The obtained results show that the apparent surface area of CNTs, fraction of closed ends, and amount of encapsulated payload can be tailored via annealing.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

One-dimensional metal-organic frameworks built by coordinating 2,4,6-tris(4-pyridyl)-1,3,5-triazine linker with copper nodes, CO2 adsorption properties

  • Portoles-Gil, Nuria|||0000-0002-2580-4641
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Fraile, Julio|||0000-0003-2961-7920
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Domingo, Concepción|||0000-0001-7857-2760
  • Ayllón, José A.|||0000-0001-7965-7424
The reaction between 2,4,6-tris(4-pyridyl)-1,3,5-triazine (4-tpt) and copper(II) hexafluoroacetylacetone (Cu(hfa)2) yields two different 1D metal-organic frameworks (MOFs), [(Cu(hfa)2)2(4-tpt)]n (1) and [Cu(hfa)2(4-tpt)]n (2). The Cu:4-tpt ratio in the new MOFs is determined by the reaction medium, particularly, the solvent used. The two compounds have been fully characterized, including crystal structure elucidation. [(Cu(hfa)2)2(4-tpt)]n (1), with a 2:1 Cu:4-tpt ratio, could be precipitated in either 1,1,2-trichloroethane or supercritical CO2. In (1), 4-tpt shows a tritopic coordination mode, but only half of the Cu(hfa)2 subunits act as a node, thus connecting two 4-tpt and giving a 1D network. The other half of Cu(hfa)2 subunits are connected only to one pyridine and thus protrude along the chains. The later Cu(hfa)2 fragments show a labile character and can be dissolved in diethyl ether to give the second MOF [Cu(hfa)2(4-tpt)]n (2), with a 1:1 Cu:4-tpt ratio. The compound (2) has also a 1D structure, with all the incorporated copper atoms acting as nodes. In this case, the packing of the chains defines accessible channels, which are perpendicular to the chain axis. After activation, N2 adsorption/desorption measurements at 77 K confirm the microporous character of (2) with an apparent surface area of 190 m2 g-1. Besides, at 273 K this material clearly shows a significant adsorption of CO2 prompted by noncoordinated nitrogen in the triazine linker.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Supercritical CO Synthesis of Porous Metalloporphyrin Frameworks, Application in Photodynamic Therapy

  • Kubovics, Márta|||0000-0002-2441-8562
  • Careta, Oriol|||0000-0003-1333-0300
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Romo-Islas, Guillermo|||0000-0002-2841-9546
  • Rodríguez Raurell, Laura|||0000-0003-1289-1587
  • Ayllón, José A.|||0000-0001-7965-7424
  • Domingo, Concepción|||0000-0001-7857-2760
  • Nogués, Carme|||0000-0002-6361-8559
  • López-Periago, Ana M.|||0000-0002-3777-3205
A series of porous metalloporphyrin frameworks prepared from the 5,10,15,20-tetra(4-pyridyl)porphyrin (HTPyP) linker and four metal complexes, M(hfac) M = Cu(II), Zn(II), Co(II), and Ni(II) (hfac: 1,1,1,5,5,5-hexafluoroacetylacetonate), were obtained using supercritical CO (scCO) as a solvent. All the materials, named generically as [M-TPyP], formed porous metal-organic frameworks (MOFs), with surface areas of ∼450 m 2 g -1. All MOFs were formed through the coordination of the metal to the exocyclic pyridine moieties in the porphyrin linker. For Cu(II), Zn(II), and Co(II), incomplete metal coordination of the inner pyrrole ring throughout the structure was observed, giving place to MOFs with substitutional defects and leading to a certain level of disorder and limited crystallinity. These samples, prepared using scCO, were precipitated as nano- to micrometric powders. Separately, a layering technique from a mixture of organic solvents was used to crystallize high-quality crystals of the Co(II) based MOF, obtained with the formula [{Co(hfac)}HTPyP]. The crystal structure of this MOF was elucidated by single-crystal synchrotron X-ray diffraction. The Zn(II)-based MOF was selected as a potential photodynamic therapy drug in the SKBR-3 tumoral cell line showing outstanding performance. This MOF resulted to be nontoxic, but after 15 min of irradiation at 630 nm, using either 1 or 5 μM concentration of the product, almost 70% of tumor cells died after 72 h.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Facile, fast and green synthesis of a highly porous calcium-syringate bioMOF with intriguing triple bioactivity

  • Rosado, Albert|||0000-0003-3222-9566
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Vázquez-Lasa, Blanca
  • García-Fernández, Luis|||0000-0002-4179-2556
  • Ramírez-Jiménez, Rosa Ana|||0000-0001-7563-2553
  • Aguilar, María Rosa|||0000-0001-7395-5754
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Domingo, Concepción|||0000-0001-7857-2760
  • Ayllón, José A.|||0000-0001-7965-7424
A facile, fast and green strategy based on ethanol is utilized to prepare a new bioMOF, namely, CaSyr-1, with particular characteristics of full biocompatibility given by using just calcium and syringic acid, the latter being a phenolic natural product found in fruits and vegetables, permanent porosity with an outstanding surface area.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Examining the adsorption of gases into solid crystalline molecular copper(II) 3,5-bis(trifluoromethyl)benzoate derivatives

  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Fraile-Sainz, Julio
  • Domingo, Concepción|||0000-0001-7857-2760
  • Ayllón, José A.|||0000-0001-7965-7424
Two copper(II) complexes, both involving the anionic 3,5-bis(trifluoromethyl)benzoate ligand (TFMBz), have been prepared and their structure elucidated by single crystal-X ray diffraction. [Cu(TFMBz)2(ISNA)2] (1) is a mononuclear complex, in which the sphere of coordination of Cu(II) is completed by two neutral isonicotinamide (ISNA) auxiliary ligands. Hydrogen bonding formed between auxiliary ISNA ligands determines the formation of a 2D supramolecular network. [Cu2(TFMBz)4(DMSO)2] (2) is a binuclear complex, in which the four carboxylate ligands define the typical paddle wheel structure often found in copper complexes, containing also the ancillary dimethyl sulfoxide (DMSO) ligand in axial positions. The elucidated crystallographic data provide the static view of the crystal structures, which reveals only non-interconnected voids for both materials. Even that, compound 1shows an appreciable adsorption of CO2 at 273 K (ca. 1 CO2 molecule/Cu atom at 100 kPa), concomitant with a reduced adsorption of Ar or N2 under similar conditions, which implies a considerable degree of selectivity for CO2. Moreover, 1 does not adsorb N2 or Ar at 77 K and 100 kPa. This behavior suggests that the stablished intermolecular hydrogen bonds rest flexibility and dynamism to 1 at low temperature. Contrarily, increasing the temperature transient porosity is originated, which allows guest molecules to diffuse through the cavities. Compound 2 shows adsorption of N2 and Ar at 77 K, indicating that vibrations in the network and rotation of some CF3 groups, necessary to favor adsorbate diffusion, are still feasible at this low temperature.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Solvent Influence in the Synthesis of Lead(II) Complexes Containing Benzoate Derivatives

  • Ayllón, José A.|||0000-0001-7965-7424
  • Vallcorba Valls, Oriol|||0000-0001-6499-7688
  • Domingo, Concepción|||0000-0001-7857-2760
A series of lead(II) complexes incorporating benzoate derivative ligands was prepared: [Pb(2MeOBz)] (1), [Pb(2MeOBz)(HO)] (2), [Pb(1,4Bzdiox)(DMSO)] (3), [Pb(1,4Bzdiox)(HO)] (4), [Pb(Pip)(HO)] (5), and [Pb(Ac)(Pip)(MeOH)] (6) (2MeOBz: 2-methoxybenzoate; 1,4Bzdiox: 1,4-benzodioxan-5-carboxylate; DMSO: dimethylsulfoxide; Ac: acetate; Pip: piperonylate; MeOH: methanol). All compounds were characterized via elemental analysis, ATR-FTIR spectroscopy, and powder XRD. In addition, the crystal structures of some compounds were elucidated. Compounds 1 and 2, involving 2-methoxybenzoate, were closely related, only differing in the presence of one extra aqua ligand found for the latter. However, this implies key changes in the studied properties, e.g., 2 shows solid-state luminescence that displays a different color as a function of the crystal orientation, while 1 does not. The crystal structure of 2 revealed a 1D coordination polymer. A similar relationship was found between compounds 3 and 4, incorporating 1,4-benzodioxan-5-carboxylate. In this pair, only 4, with aqua ligands, displayed a greenish-yellow-color solid-state luminescence. Furthermore, two new lead(II) piperonylate complexes, 5 and 6, were obtained from the reaction between lead(II) acetate and piperonylic acid. In water, all acetate ligands in the metal precursor were displaced and [Pb(Pip)(HO)] (5) was isolated, while in methanol, a mixed acetate-piperonylate complex, [Pb(Ac)(Pip)(MeOH)] (6), was precipitated. Considering only conventional Pb-O bonds, the crystal structure of 6 was described as a 1D coordination polymer, although, additionally, the chains were associated via tetrel bonds, defining an extended 2D architecture.