Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nanoscale Polarization-Dependent Young's Modulus of Ferroelectric BaTiO3 Single Crystals

  • Checa, Marti|||0000-0003-2607-6866
  • Stefani, Christina|||0000-0002-8818-075X
  • Kelley, Kyle|||0000-0002-7688-0484
  • Balke, Nina|||0000-0001-5865-5892
  • Collins, Liam
  • Catalan, Gustau|||0000-0003-0214-4828
  • Jesse, Stephen
  • Domingo Marimon, Neus|||0000-0002-5229-6638
Flexoelectric fields produced by strong strain gradients at the nanoscale couple to ferroelectric polarization, promoting changes in the mechanical properties of ferroelectric materials as a function of the direction of the ferroelectric polarization. In this work, we calculate the asymmetry in the Young's modulus found in oppositely polarized out-of-plane domains of BaTiO single crystals by means of contact resonance AFM, and we evaluate its impact on the electromechanical response as measured by piezoresponse force microscopy, both using band excitation modes. We analyze the electromechanical response of the different BaTiO domains using k-means to build up their mean elastic and electromechanical features and quantify the flexoelectrically induced modulation of the Young's modulus. Finally, we discuss the use of contact Kelvin probe force microscope measurements to decouple electrostatic artifacts from purely piezoelectric ones when flexoelectric coupling appears.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Water affinity and surface charging at the z-cut and y-cut LiNbO3 surfaces: An ambient pressure X-ray photoelectron spectroscopy study

  • Cordero-Edwards, Kumara
  • Rodríguez, Laura
  • Calò, Annalisa
  • Esplandiú, María J.
  • Pérez-Dieste, Virginia
  • Escudero, Carlos
  • Domingo, Neus
  • Verdaguer, Albert
Polarization dependence of water adsorption and desorption on LiNbO surfaces was demonstrated using X-ray photoelectron spectroscopy (XPS) carried out in situ under near-ambient conditions. Positive and negative (0001) faces (z-cut) of the same crystal were compared for the same temperature and pressure conditions. Our results indicate a preferential adsorption on the positive face of the crystal with increasing water pressure and also higher desorption temperature of the adsorbed molecular water at the positive face. Adsorption measurements on the (1100) face (y-cut) showed also strong affinity to water, as observed for the z-cut positive surface. We found a direct relation between the capacity of the surface to discharge and/or to screen surface charges and the affinity for water of each face. XPS spectra indicate the presence of OH groups at the surface for all the conditions and surfaces measured., This work has been partially funded by the 2014 SGR 1216 project from the Generalitat de Catalunya, the MAT2012-38319-C02-01, the FIS2013-48668-C2-1-P, and FIS2015- 73932-JIN from the Spanish Ministerio de Economia y Competitividad (MINECO). K.C-E.’s work was funded by an ERC Starting Grant from the EU (Project No. 308023). N.D. is also grateful to MINECO for the “Ramon y Cajal” contract RYC-2010-06365. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Local piezoelectric behavior of potassium sodium niobate prepared by a facile synthesis via water soluble precursors

  • Senes, Nina
  • Iacomini, Antonio
  • Domingo, Neus
  • Enzo, Stefano
  • Mulas, Gabriele
  • Cuesta-López, Santiago
  • Garroni, Sebastiano
Due to the ever‐increasing restrictions connected to the use of toxic lead‐based materials, the developing of lead‐free piezoceramics has become one of the most urgent tasks. In this context, potassium sodium niobate materials (KNN) have attracted a lot of interest as promising candidates due to their excellent piezo properties. For this reason, many efforts have been addressed to optimize the synthesis process now suffering by several drawbacks including the high volatilization of potassium and sodium at the conventional high temperature treatments and the use of expensive metal precursors. To overcome these issues, a new modified Pechini method to synthesize single phase K0.5Na0.5NbO3 powders, from water soluble metal precursors, is presented. Microstructural and structural parameters are characterized by X‐ray diffraction (XRD). Depending on the amount of citric acid added to the starting reagents, two pure single‐phase K0.5Na0.5NbO3 (2 g citric acid) and K0.3Na0.7NbO3 (0.2 g citric acid), respectively, are obtained with a good crystallinity at a moderate temperature of 500 °C. The piezo responses of the as calcined systems are tested by piezoresponse force microscopy (PFM). K0.5Na0.5NbO3 exhibits a much higher response with respect to the other phase, which relates to the larger crystallinity and to the chemical composition., This work has been partially funded by the H2020‐MSCA‐IF‐2015 grant number #707954. The activity of N. Senes is supported by a PhD program in a collaborative scheme between the University of Sassari and Cagliari of Italy, which is especially endorsed by Autonomous Regional Administration of Sardinia (RAS). The authors acknowledge the support of the “Servizi di Ateneo per la Ricerca (CeSAR)” of the Sassari University where preliminary XRD experiments, using the Rigaku Smart Lab rotating anode diffractometer, and SEM analyses, were conducted. Financial support was obtained under project from the Spanish Ministerio de Economía y Competitividad (MINECO) under project FIS2015‐73932‐JIN. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant No. SEV‐2013‐0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Converse flexoelectricity yields large piezoresponse force microscopy signals in non-piezoelectric materials

  • Abdollahi, Amir
  • Domingo, Neus
  • Arias, Irene
  • Catalán, Gustau
Converse flexoelectricity is a mechanical stress induced by an electric polarization gradient. It can appear in any material, irrespective of symmetry, whenever there is an inhomogeneous electric field distribution. This situation invariably happens in piezoresponse force microscopy (PFM), which is a technique whereby a voltage is delivered to the tip of an atomic force microscope in order to stimulate and probe piezoelectricity at the nanoscale. While PFM is the premier technique for studying ferroelectricity and piezoelectricity at the nanoscale, here we show, theoretically and experimentally, that large effective piezoelectric coefficients can be measured in non-piezoelectric dielectrics due to converse flexoelectricity., G.C. and N.D. acknowledge financial support from ERC Starting grant 308023, from Plan Nacional project MINECO Grant MAT2016-77100-C2-1-P and FIS2015-73932-JIN and support of Generalitat de Catalunya (Grant No. 2017-SGR-579). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2017-0706) and the CERCA Programme / Generalitat de Catalunya. I.A. acknowledges the support of the Generalitat de Catalunya through the prize “ICREA Academia” for excellence in research and of the European Research Council (StG-679451). I.A. and A.A. also acknowledge the support of Generalitat de Catalunya (Grant No. 2017-SGR-1278)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Signal enhancement on gold nanoparticle-based lateral flow tests using cellulose nanofibers

  • Quesada-González, Daniel
  • Stefani, Christina
  • González, Israel
  • Escosura-Muñiz, Alfredo de la
  • Domingo, Neus
  • Mutjé, Pere
  • Merkoçi, Arben
Lateral flow paper-based biosensors merge as powerful tools in point-of-care diagnostics since they are cheap, portable, robust, selective, fast and easy to use. However, the sensitivity of this type of biosensors is not always as high as required, often not permitting a clear quantification. To improve the colorimetric response of standard lateral flow strips (LFs), we have applied a new enhancement strategy that increases the sensitivity of LFs based on the use of cellulose nanofibers (CNF). CNF penetrate inside the pores of LFs nitrocellulose paper, compacting the pore size only in the test line, particularly near the surface of the strip. This modification retains the bioreceptors (antibodies) close to the surface of the strips, and thus further increasing the density of selectively attached gold nanoparticles (AuNPs) in the top part of the membrane, in the test line area, only when the sample is positive. This effect boosts in average a 36.6% the sensitivity of the LFs. The optical measurements of the LFs were carried out with a mobile phone camera whose imaging resolution was improved by attaching microscopic lens on the camera objective. The characterization of CNF into paper and their effect was analyzed using atomic force microscope (AFM) and scanning electron microscope (SEM) imaging techniques., The ICN2 is funded by the CERCA Programme / Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa program of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant No. SEV-2017-0706). Financial support was obtained under MAT2017-87202-P, funded by Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional, and MINECO project FIS2015-73932-JIN. This work was partially funded by 2017-SGR-579 project from the Generalitat de Catalunya. D.Q.G. acknowledges Universitat Autònoma de Barcelona for the possibility of carrying out this work inside the framework of its PhD Programme in Chemistry. Ch.S. thanks the BIST for a preBIST Grant (No. 754558)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Water adsorption, dissociation and oxidation on SrTiO3 and ferroelectric surfaces revealed by ambient pressure X-ray photoelectron spectroscopy

  • Domingo, Neus
  • Pach, Elzbieta
  • Cordero-Edwards, Kumara
  • Pérez Dieste, Virginia
  • Escudero, Carlos
  • Verdaguer, Albert
Water dissociation on oxides is of great interest because its fundamental aspects are still not well understood and it has implications in many processes, from ferroelectric polarization screening phenomena to surface catalysis and surface chemistry on oxides. In situ water dissociation and redox processes on metal oxide perovskites which easily expose TiO2-terminated surfaces, such as SrTiO3, BaTiO3 or Pb(Zr,Ti)O3, are studied by ambient pressure XPS, as a function of water vapour pressure. From the analysis of the O1s spectrum, we determine the presence of different types of oxygen based species, from hydroxyl groups, either bound to Ti4+ and metal sites or lattice oxygen, to different peroxide compounds, and propose a model for the adsorbate layer composition, valid for environmental conditions. From the XPS analysis, we describe the existing surface redox reactions for metal oxide perovskites, occurring at different water vapour pressures. Among them, peroxide species resulting from surface oxidative reactions are correlated with the presence of Ti4+ ions, which are observed to specifically promote surface oxidation and water dissociation as compared to other metals. Finally, surface peroxidation is enhanced by X-ray beam irradiation, leading to a higher coverage of peroxide species after beam overexposure and by ferroelectric polarization, demonstrating the enhancement of the reactivity of the surfaces of ferroelectric materials due to the effect of internal electric fields., The authors would like to acknowledge Prof. P. Paruch of Université de Genève, who kindly provided PZT thin film samples and Prof. B. Noheda for kindly providing BFO thin films. Financial support was provided by the Spanish Ministerio de Economía y Competitividad (MINECO) under projects FIS2015-73932-JIN and MAT2016-77852-C2-1-R (AEI/FEDER, UE). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706), and ICMAB acknowledges support from the Severo Ochoa Program of MINECO (Grant No. SEV-2015-0496). This work was partially funded by 2017-SGR-579 and 2017-SGR-668 projects from the Generalitat de Catalunya., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface charged species and electrochemistry of ferroelectric thin films

  • Domingo, Neus
  • Gaponenko, Iaroslav
  • Cordero-Edwards, Kumara
  • Stucki, Nicolas
  • Pérez Dieste, Virginia
  • Escudero, Carlos
  • Pach, Elzbieta
  • Verdaguer, Albert
  • Paruch, Patrycja
The combination of scanning probe microscopy and ambient pressure X-ray photoelectron spectroscopy opens up new perspectives for the study of combined surface chemical, electrochemical and electromechanical properties at the nanoscale, providing both nanoscale resolution of physical information and the chemical sensitivity required to identify surface species and bulk ionic composition. In this work, we determine the nature and evolution over time of surface chemical species obtained after water-mediated redox reactions on Pb(Zr0.2,Ti0.8)O3 thin films with opposite as-grown polarization states. Starting with intrinsically different surface chemical composition on the oppositely polarized films (as a result of their ferroelectric-dominated interaction with environmental water), we identify the reversible and irreversible electrochemical reactions under an external electric field, distinguishing switching and charging events. We find that while reversible ionic displacements upon polarization switching dominate screening in the bulk of the sample, polarization dependent irreversible redox reactions determine surface chemical composition, which reveals itself as a characteristic fingerprint of the ferroelectric polarization switching history., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Periodicity-doubling cascades: Direct observation in ferroelastic materials

  • Everhardt, Arnoud S.
  • Damerio, Silvia
  • Zorn, Jacob A.
  • Zhou, Silang
  • Domingo, Neus
  • Catalán, Gustau
  • Salje, Ekhard K. H.
  • Chen, Long-Qing
  • Noheda, Beatriz
Very sensitive responses to external forces are found near phase transitions. However, transition dynamics and preequilibrium phenomena are difficult to detect and control. We have observed that the equilibrium domain structure following a phase transition in ferroelectric and ferroelastic BaTiO3 is attained by halving of the domain periodicity multiple times. The process is reversible, with periodicity doubling as temperature is increased. This observation is reminiscent of the period-doubling cascades generally observed during bifurcation phenomena, and, thus, it conforms to the “spatial chaos” regime earlier proposed by Jensen and Bak [Phys. Scr. T 9, 64 (1985)] for systems with competing spatial modulations., A. S. E., S. D., and B. N. acknowledge financial support from the alumni organization of the University of Groningen, De Aduarderking (Ubbo Emmius Fonds). Parts of this research were carried out at the light source Petra III at DESY, a member of the Helmholtz Association (HGF). G. C. and N. D. acknowledge Projects No. FIS2015-73932-JIN and No. MAT2016-77100-C2-1-P from the Spanish MINECO and Project No. 2017-SGR-579 from the Generalitat de Catalunya. All work at ICN2 is also supported by the Severo Ochoa Program (Grant No. SEV-2017-0706). The work at Penn State is supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Materials Sciences and Engineering, under Award No. FG02-07ER46417 (J. A. Z. and L.-Q. C.) and, partially, by a graduate fellowship from the 3M Company (J. A. Z.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Oxidation processes at the surface of BaTiO3 thin films under environmental conditions

  • Spasojević, Irena
  • Sauthier, Guillaume
  • Caicedo, José Manuel
  • Verdaguer, Albert
  • Domingo, Neus
Dissociation and adsorption of water on ferroelectric oxide surfaces play important role in the processes of screening and switching dynamics of ferroelectric polarization, as well as in catalytic processes which can be additionally coupled with light, temperature or vibration stimuli. In this work, we present XPS study of ferroelectric BaTiO3 thin films and determine the entanglement between surface chemistry, polarization direction and stability, by observing changes upon time exposure to environmental conditions, heating in O2 atmosphere and irradiation in vacuum. We devote special attention to Ba 3d spectral region and identify two different oxidation states of O atoms in the compounds of Ba. While this second specie was generally attributed to Ba in surface compounds where it has different oxygen coordination than in the bulk, based on the XPS results of oxygen annealed thin films, we demonstrate that this so far neglected component, corresponds to barium peroxide (BaO2) and identify it as important active specie for the study of screening mechanisms closely related with catalytic activity present in this ferroelectric material. Finally, we report on chemically assisted polarization switching in thin films induced by heating in vacuum or exposure to X-Ray radiation due to the formation of positive surface electric field created by oxygen or electron vacancies, respectively., Financial support was obtained under projects from the Spanish Ministerio de Ciencia e Innovación (MICINN) under projects FIS2015-73932-JIN, PID2019-109931GB-I00 and PID2019-110907GB-I00. In addition, this work was partially funded by 2017-SGR-579 from the Generalitat de Catalunya. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence Programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and ICMAB is supported by the Severo Ochoa Centres of Excellence Programme, funded by the Spanish Research Agency (AEI, grant no. CEX2019-000917-S). I. S. acknowledges support of the Secretaria d'Universitats i Recerca - Departament d'Empresa i Coneixement - Generalitat de Catalunya and the European Social Fund (ESF) (FI grant reference 2020 FI_B2 00157)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Non-linear nanoscale piezoresponse of single ZnO nanowires affected by piezotronic effect

  • Lozano, Helena
  • Catalán, Gustau
  • Esteve, Jaume
  • Domingo, Neus
  • Murillo Rodríguez, Gonzalo
Zinc oxide (ZnO) nanowires (NWs) as semiconductor piezoelectric nanostructures have emerged as material of interest for applications in energy harvesting, photonics, sensing, biomedical science, actuators or spintronics. The expression for the piezoelectric properties in semiconductor materials is concealed by the screening effect of the available carriers and the piezotronic effect, leading to complex nanoscale piezoresponse signals. Here, we have developed a metal–semiconductor–metal model to simulate the piezoresponse of single ZnO NWs, demonstrating that the apparent non-linearity in the piezoelectric coefficient arises from the asymmetry created by the forward and reversed biased Schottky barriers at the semiconductor–metal junctions. By directly measuring the experimental I–V characteristics of ZnO NWs with conductive atomic force microscope together with the piezoelectric vertical coefficient by piezoresponse force microscopy, and comparing them with the numerical calculations for our model, effective piezoelectric coefficients in the range d33eff ∼ 8.6 pm V−1–12.3 pm V−1 have been extracted for ZnO NWs. We have further demonstrated via simulations the dependence between the effective piezoelectric coefficient d33eff and the geometry and physical dimensions of the NW (radius to length ratio), revealing that the higher d33eff is obtained for thin and long NWs due to the tensor nature proportionality between electric fields and deformation in NW geometries. Moreover, the non-linearity of the piezoresponse also leads to multiharmonic electromechanical response observed at the second and higher harmonics that indeed is not restricted to piezoelectric semiconductor materials but can be generalized to any type of asymmetric voltage drops on a piezoelectric structure as well as leaky wide band-gap semiconductor ferroelectrics., Financial support was obtained under projects from the Spanish Ministerio de Economía y Competitividad (MINECO) under project FIS2015-73932-JIN, H2020 ECSEL-JU under EnSO project (Energy for Smart Objetcs) (Contract no. 692482) and La Caixa Foundation under the Junior Leader Retaining program (LCF/BQ/PR19/11700010). In addition, this work was partially funded by 2017-SGR-579 from the Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant Nos. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mechanical reading of ferroelectric polarization

  • Stefani, Christina
  • Langenberg, Eric
  • Cordero-Edwards, Kumara
  • Schlom, Darrell G.
  • Catalán, Gustau
  • Domingo, Neus
Flexoelectricity is a property of dielectric materials whereby they exhibit electric polarization induced by strain gradients; while this effect can be negligible at the macroscale, it can become dominant at the nanoscale, where strain gradients can turn out to be tremendous. Previous works have demonstrated that flexoelectricity coupled with piezoelectricity enables the mechanical writing of ferroelectric polarization. When considering ferroelectric materials with out-of-plane polarization, the coupling of piezoelectricity with flexoelectricity can insert a mechanical asymmetry to the system and enable the distinction of oppositely polarized domains, based on their nanomechanical response. Using atomic force microscopy and, more specifically, contact resonance techniques, the coupling of flexoelectricity to piezoelectricity can be exploited to mechanically read the sign of ferroelectric polarization in a non-destructive way. We have measured a variety of ferroelectric materials, from a single crystal to thin films, and domains that are polarized down always appear to be stiffer than oppositely polarized domains. In this article, we demonstrate experimentally that the phenomenon is size-dependent and strongly enhanced when the dimension of the material is reduced to nanoscale in thin films. Ultimately, we demonstrate how the sensitivity in mechanical reading of ferroelectric polarization can be improved by appropriately tuning the mechanical stiffness of the cantilevers., Financial support was obtained under projects from the Spanish Ministerio de Ciencia e Innovación (MICINN) under Project Nos. FIS2015-73932-JIN, MAT2016-77100-C2-1-P, PID2019-108573GB-C21, and PID2019-109931GB-I00. In addition, this work was partially funded by No. 2017-SGR-579 from the Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa Centres of Excellence Programme, funded by the Spanish Research Agency (AEI, Grant No. SEV-2017-0706). C.S. thanks BIST for the PREBIST Grant. This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie (MSCA) Grant Agreement No. 754558. Finally, E.L. acknowledges the individual fellowship No. MSCA-IF-GF-708129. E.L. is a Serra Húnter Fellow. K.C-E. acknowledges the Division II of the Swiss National Science Foundation under Project No. 200021_178782.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoscale Polarization-Dependent Young's Modulus of Ferroelectric BaTiO3 Single Crystals

  • Checa, Martí
  • Stefani, Christina
  • Kelley, Kyle
  • Balke, Nina
  • Collins, Liam
  • Catalán, Gustau
  • Jesse, Stephen
  • Domingo, Neus
Flexoelectric fields produced by strong strain gradients at the nanoscale couple to ferroelectric polarization, promoting changes in the mechanical properties of ferroelectric materials as a function of the direction of the ferroelectric polarization. In this work, we calculate the asymmetry in the Young's modulus found in oppositely polarized out-of-plane domains of BaTiO3 single crystals by means of contact resonance AFM, and we evaluate its impact on the electromechanical response as measured by piezoresponse force microscopy, both using band excitation modes. We analyze the electromechanical response of the different BaTiO3 domains using k-means to build up their mean elastic and electromechanical features and quantify the flexoelectrically induced modulation of the Young's modulus. Finally, we discuss the use of contact Kelvin probe force microscope measurements to decouple electrostatic artifacts from purely piezoelectric ones when flexoelectric coupling appears., This work was supported by the Center for Nanophase Materials Sciences (CNMS), which is a U.S. Department of Energy, Office of Science User Facility at Oak Ridge National Laboratory. Financial support was obtained under projects from the Spanish Ministerio de Economía y Competitividad (MINECO) under projects FIS2015-73932-JIN and PID2019-109931GB-I00. In addition, this work was partially funded by 2017-SGR-579 from the Generalitat de Catalunya. The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centers of Excellence Program, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). C.S. acknowledges BIST for the PREBIST Grant. This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie (MSCA) grant agreement no. 754558., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ferroelectrics as smart mechanical materials

  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Abdollahi, Amir|||0000-0003-0363-4984
  • Sort, Jordi|||0000-0003-1213-3639
  • Catalan, Gustau|||0000-0003-0214-4828
The mechanical properties of materials are insensitive to space inversion, even when they are crystallographically asymmetric. In practice, this means that turning a piezoelectric crystal upside down or switching the polarization of a ferroelectric should not change its mechanical response. Strain gradients, however, introduce an additional source of asymmetry that has mechanical consequences. Using nanoindentation and contact-resonance force microscopy, this study demonstrates that the mechanical response to indentation of a uniaxial ferroelectric (LiNbO₃) does change when its polarity is switched, and use this mechanical asymmetry both to quantify its flexoelectricity and to mechanically read the sign of its ferroelectric domains.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Domain wall magnetoresistance in BiFeO₃ thin films measured by scanning probe microscopy

  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Farokhipoor, S.
  • Santiso, José|||0000-0003-4274-2101
  • Noheda, Beatriz|||0000-0001-8456-2286
  • Catalan, Gustau|||0000-0003-0214-4828
We measure the magnetotransport properties of individual 71° domain walls in multiferroic BiFeO₃ by means of conductive-atomic force microscopy (C-AFM) in the presence of magnetic fields up to one Tesla. The results suggest anisotropic magnetoresistance at room temperature, with the sign of the magnetoresistance depending on the relative orientation between the magnetic field and the domain wall plane. A consequence of this finding is that macroscopically averaged magnetoresistance measurements for domain wall bunches are likely to underestimate the magnetoresistance of each individual domain wall.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Water affinity and surface charging at the z-Cut and y-Cut LiNbO3 surfaces, an ambient pressure X-ray photoelectron spectroscopy study

  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Rodríguez Domínguez, Laura|||0000-0002-6669-1962
  • Calò, Annalisa
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Pérez-Dieste, Virginia
  • Escudero, Carlos|||0000-0001-8716-9391
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
Polarization dependence of water adsorption and desorption on LiNbO₃ surfaces was demonstrated using X-ray photoelectron spectroscopy (XPS) carried out in situ under near-ambient conditions. Positive and negative (0001) faces (z-cut) of the same crystal were compared for the same temperature and pressure conditions. Our results indicate a preferential adsorption on the positive face of the crystal with increasing water pressure and also higher desorption temperature of the adsorbed molecular water at the positive face. Adsorption measurements on the (1100) face (y-cut) showed also strong affinity to water, as observed for the z-cut positive surface. We found a direct relation between the capacity of the surface to discharge and/or to screen surface charges and the affinity for water of each face. XPS spectra indicate the presence of OH groups at the surface for all the conditions and surfaces measured.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Converse flexoelectricity yields large piezoresponse force microscopy signals in non-piezoelectric materials

  • Abdollahi, Amir|||0000-0003-0363-4984
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Arias, Irene|||0000-0002-6761-3499
  • Catalan, Gustau|||0000-0003-0214-4828
Converse flexoelectricity is a mechanical stress induced by an electric polarization gradient. It can appear in any material, irrespective of symmetry, whenever there is an inhomogeneous electric field distribution. This situation invariably happens in piezoresponse force microscopy (PFM), which is a technique whereby a voltage is delivered to the tip of an atomic force microscope in order to stimulate and probe piezoelectricity at the nanoscale. While PFM is the premier technique for studying ferroelectricity and piezoelectricity at the nanoscale, here we show, theoretically and experimentally, that large effective piezoelectric coefficients can be measured in non-piezoelectric dielectrics due to converse flexoelectricity.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Periodicity-doubling cascades, direct observation in ferroelastic materials

  • Everhardt, Arnoud S.|||0000-0002-6690-143X
  • Damerio, Silvia
  • Zorn, Jacob A.
  • Zhou, Silang
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Catalan, Gustau|||0000-0003-0214-4828
  • Salje, Ekhard K.  H.
  • Chen, Long-Qing
  • Noheda, Beatriz|||0000-0001-8456-2286
Very sensitive responses to external forces are found near phase transitions. However, transition dynamics and preequilibrium phenomena are difficult to detect and control. We have observed that the equilibrium domain structure following a phase transition in ferroelectric and ferroelastic BaTiO3 is attained by halving of the domain periodicity multiple times. The process is reversible, with periodicity doubling as temperature is increased. This observation is reminiscent of the period-doubling cascades generally observed during bifurcation phenomena, and, thus, it conforms to the "spatial chaos" regime earlier proposed by Jensen and Bak [Phys. Scr. T 9, 64 (1985)PHSTER0281-184710.1088/0031-8949/1985/T9/009] for systems with competing spatial modulations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Signal enhancement on gold nanoparticle-based lateral flow tests using cellulose nanofibers

  • Quesada-González, Daniel|||0000-0003-3064-2146
  • Stefani, Christina|||0000-0002-8818-075X
  • González Tovar, Israel|||0000-0002-3031-4516
  • De La Escosura-Muñiz, Alfredo|||0000-0002-9600-0253
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Mutjé, Pere|||0000-0001-8211-4949
  • Merkoçi, Arben|||0000-0003-2486-8085
Lateral flow paper-based biosensors merge as powerful tools in point-of-care diagnostics since they are cheap, portable, robust, selective, fast and easy to use. However, the sensitivity of this type of biosensors is not always as high as required, often not permitting a clear quantification. To improve the colorimetric response of standard lateral flow strips (LFs), we have applied a new enhancement strategy that increases the sensitivity of LFs based on the use of cellulose nanofibers (CNF). CNF penetrate inside the pores of LFs nitrocellulose paper, compacting the pore size only in the test line, particularly near the surface of the strip. This modification retains the bioreceptors (antibodies) close to the surface of the strips, and thus further increasing the density of selectively attached gold nanoparticles (AuNPs) in the top part of the membrane, in the test line area, only when the sample is positive. This effect boosts in average a 36.6% the sensitivity of the LFs. The optical measurements of the LFs were carried out with a mobile phone camera whose imaging resolution was improved by attaching microscopic lens on the camera objective. The characterization of CNF into paper and their effect was analyzed using atomic force microscope (AFM) and scanning electron microscope (SEM) imaging techniques.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Water adsorption, dissociation and oxidation on SrTiO3 and ferroelectric surfaces revealed by ambient pressure X-ray photoelectron spectroscopy

  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Pach, Elzbieta|||0000-0001-9587-3768
  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Pérez-Dieste, Virginia
  • Escudero, Carlos|||0000-0001-8716-9391
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
Water dissociation on oxides is of great interest because its fundamental aspects are still not well understood and it has implications in many processes, from ferroelectric polarization screening phenomena to surface catalysis and surface chemistry on oxides. In situ water dissociation and redox processes on metal oxide perovskites which easily expose TiO-terminated surfaces, such as SrTiO, BaTiO or Pb(Zr,Ti)O, are studied by ambient pressure XPS, as a function of water vapour pressure. From the analysis of the O1s spectrum, we determine the presence of different types of oxygen based species, from hydroxyl groups, either bound to Ti and metal sites or lattice oxygen, to different peroxide compounds, and propose a model for the adsorbate layer composition, valid for environmental conditions. From the XPS analysis, we describe the existing surface redox reactions for metal oxide perovskites, occurring at different water vapour pressures. Among them, peroxide species resulting from surface oxidative reactions are correlated with the presence of Ti ions, which are observed to specifically promote surface oxidation and water dissociation as compared to other metals. Finally, surface peroxidation is enhanced by X-ray beam irradiation, leading to a higher coverage of peroxide species after beam overexposure and by ferroelectric polarization, demonstrating the enhancement of the reactivity of the surfaces of ferroelectric materials due to the effect of internal electric fields.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Non-linear nanoscale piezoresponse of single ZnO nanowires affected by piezotronic effect

  • Lozano, Helena|||0000-0002-8609-003X
  • Catalan, Gustau|||0000-0003-0214-4828
  • Esteve, Jaume|||0000-0001-9440-7984
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Murillo, Gonzalo|||0000-0002-0368-1900
Zinc oxide (ZnO) nanowires (NWs) as semiconductor piezoelectric nanostructures have emerged as material of interest for applications in energy harvesting, photonics, sensing, biomedical science, actuators or spintronics. The expression for the piezoelectric properties in semiconductor materials is concealed by the screening effect of the available carriers and the piezotronic effect, leading to complex nanoscale piezoresponse signals. Here, we have developed a metal-semiconductor-metal model to simulate the piezoresponse of single ZnO NWs, demonstrating that the apparent non-linearity in the piezoelectric coefficient arises from the asymmetry created by the forward and reversed biased Schottky barriers at the semiconductor-metal junctions. By directly measuring the experimental I-V characteristics of ZnO NWs with conductive atomic force microscope together with the piezoelectric vertical coefficient by piezoresponse force microscopy, and comparing them with the numerical calculations for our model, effective piezoelectric coefficients in the range d 33eff ∼ 8.6 pm V¯¹-12.3 pm V¯¹ have been extracted for ZnO NWs. We have further demonstrated via simulations the dependence between the effective piezoelectric coefficient d 33eff and the geometry and physical dimensions of the NW (radius to length ratio), revealing that the higher d 33eff is obtained for thin and long NWs due to the tensor nature proportionality between electric fields and deformation in NW geometries. Moreover, the non-linearity of the piezoresponse also leads to multiharmonic electromechanical response observed at the second and higher harmonics that indeed is not restricted to piezoelectric semiconductor materials but can be generalized to any type of asymmetric voltage drops on a piezoelectric structure as well as leaky wide band-gap semiconductor ferroelectrics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Oxidation processes at the surface of BaTiO3 thin films under environmental conditions

  • Spasojevic, Irena|||0000-0002-6426-7009
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
  • Domingo Marimon, Neus|||0000-0002-5229-6638
Dissociation and adsorption of water on ferroelectric oxide surfaces play important role in the processes of screening and switching dynamics of ferroelectric polarization, as well as in catalytic processes which can be additionally coupled with light, temperature or vibration stimuli. In this work, we present XPS study of ferroelectric BaTiOthin films and determine the entanglement between surface chemistry, polarization direction and stability, by observing changes upon time exposure to environmental conditions, heating in Oatmosphere and irradiation in vacuum. We devote special attention to Ba 3d spectral region and identify two different oxidation states of O atoms in the compounds of Ba. While this second specie was generally attributed to Ba in surface compounds where it has different oxygen coordination than in the bulk, based on the XPS results of oxygen annealed thin films, we demonstrate that this so far neglected component, corresponds to barium peroxide (BaO) and identify it as important active specie for the study of screening mechanisms closely related with catalytic activity present in this ferroelectric material. Finally, we report on chemically assisted polarization switching in thin films induced by heating in vacuum or exposure to X-Ray radiation due to the formation of positive surface electric field created by oxygen or electron vacancies, respectively.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Local Piezoelectric Behavior of Potassium Sodium Niobate Prepared by a Facile Synthesis via Water Soluble Precursors

  • Senes, Nina|||0000-0003-1644-2092
  • Iacomini, Antonio|||0000-0002-6580-8129
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Enzo, Stefano|||0000-0002-3628-5269
  • Mulas, Gabriele|||0000-0003-2285-3955
  • Cuesta-Lopez, Santiago|||0000-0002-7401-3889
  • Garroni, Sebastiano|||0000-0001-7686-6589
Due to the ever-increasing restrictions connected to the use of toxic lead-based materials, the developing of lead-free piezoceramics has become one of the most urgent tasks. In this context, potassium sodium niobate materials (KNN) have attracted a lot of interest as promising candidates due to their excellent piezo properties. For this reason, many efforts have been addressed to optimize the synthesis process now suffering by several drawbacks including the high volatilization of potassium and sodium at the conventional high temperature treatments and the use of expensive metal precursors. To overcome these issues, a new modified Pechini method to synthesize single phase KNaNbO powders, from water soluble metal precursors, is presented. Microstructural and structural parameters are characterized by X-ray diffraction (XRD). Depending on the amount of citric acid added to the starting reagents, two pure single-phase KNaNbO (2 g citric acid) and KNaNbO (0.2 g citric acid), respectively, are obtained with a good crystallinity at a moderate temperature of 500 °C. The piezo responses of the as calcined systems are tested by piezoresponse force microscopy (PFM). KNaNbO exhibits a much higher response with respect to the other phase, which relates to the larger crystallinity and to the chemical composition.