Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Spontaneous formation of spiral-like patterns with distinct periodic physical properties by confined electrodeposition of Co-In disks

  • Golvano Escobal, Irati|||0000-0001-8518-8185
  • Gonzalez-Rosillo, Juan Carlos
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Illa, Xavi|||0000-0002-3212-1128
  • López-Barbera, José Francisco|||0000-0002-9475-625X
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Solsona, Pau|||0000-0001-9274-2447
  • Aballe, Lucía|||0000-0003-1810-8768
  • Foerster, Michael|||0000-0002-4147-6668
  • Baró, M. D.|||0000-0002-8636-1063
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Spatio-temporal patterns are ubiquitous in different areas of materials science and biological systems. However, typically the motifs in these types of systems present a random distribution with many possible different structures. Herein, we demonstrate that controlled spatio-temporal patterns, with reproducible spiral-like shapes, can be obtained by electrodeposition of Co-In alloys inside a confined circular geometry (i.e., in disks commensurate with the typical size of the spatio-temporal features). These patterns are mainly of compositional nature, i.e., with virtually no topographic features. Interestingly, the local changes in composition lead to a periodic modulation of the physical (electric, magnetic and mechanical) properties. Namely, the Co-rich areas show higher saturation magnetization and electrical conductivity and are mechanically harder than the In-rich ones. Thus, this work reveals that confined electrodeposition of this binary system constitutes an effective procedure to attain template-free magnetic, electric and mechanical surface patterning with specific and reproducible shapes.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ferroelectrics as smart mechanical materials

  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Abdollahi, Amir|||0000-0003-0363-4984
  • Sort, Jordi|||0000-0003-1213-3639
  • Catalan, Gustau|||0000-0003-0214-4828
The mechanical properties of materials are insensitive to space inversion, even when they are crystallographically asymmetric. In practice, this means that turning a piezoelectric crystal upside down or switching the polarization of a ferroelectric should not change its mechanical response. Strain gradients, however, introduce an additional source of asymmetry that has mechanical consequences. Using nanoindentation and contact-resonance force microscopy, this study demonstrates that the mechanical response to indentation of a uniaxial ferroelectric (LiNbO₃) does change when its polarity is switched, and use this mechanical asymmetry both to quantify its flexoelectricity and to mechanically read the sign of its ferroelectric domains.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Domain wall magnetoresistance in BiFeO₃ thin films measured by scanning probe microscopy

  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Farokhipoor, S.
  • Santiso, José|||0000-0003-4274-2101
  • Noheda, Beatriz|||0000-0001-8456-2286
  • Catalan, Gustau|||0000-0003-0214-4828
We measure the magnetotransport properties of individual 71° domain walls in multiferroic BiFeO₃ by means of conductive-atomic force microscopy (C-AFM) in the presence of magnetic fields up to one Tesla. The results suggest anisotropic magnetoresistance at room temperature, with the sign of the magnetoresistance depending on the relative orientation between the magnetic field and the domain wall plane. A consequence of this finding is that macroscopically averaged magnetoresistance measurements for domain wall bunches are likely to underestimate the magnetoresistance of each individual domain wall.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Identification of HIV-1-Based Virus-like Particles by Multifrequency Atomic Force Microscopy

  • González-Domínguez, Irene|||0000-0002-7920-5505
  • Gutiérrez Granados, Sonia
  • Cervera Gracia, Laura|||0000-0002-3639-2793
  • Gòdia, Francesc|||0000-0002-4060-9887
  • Domingo Marimon, Neus|||0000-0002-5229-6638
Virus-like particles (VLPs) have become a promising platform for vaccine production. VLPs are formed by structural viral proteins that inherently self-assemble when expressed in a host cell. They represent a highly immunogenic and safe vaccine platform, due to the absence of the viral genome and its high protein density. One of the most important parameters in vaccine production is the quality of the product. A related bottleneck in VLP-based products is the presence of cellular vesicles as a major contaminant in the preparations, which will require the set up of techniques allowing for specific discrimination of VLPs from host vesicular bodies. In this work novel, to our knowledge, multifrequency (MF) atomic force microscopy (AFM) has permitted full structural nanophysical characterization by its access to the virus capsid of the HIV-based VLPs. The assessment of these particles by advanced amplitude modulation-frequency modulation (AM-FM) viscoelastic mapping mode has enhanced the imaging resolution of their nanomechanical properties, opening a new window for the study of the biophysical attributes of VLPs. Finally, the identification and differentiation of HIV-based VLPs from cellular vesicles has been performed under ambient conditions, providing, to our knowledge, novel methodology for the monitoring and quality control of VLPs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Water affinity and surface charging at the z-Cut and y-Cut LiNbO3 surfaces, an ambient pressure X-ray photoelectron spectroscopy study

  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Rodríguez Domínguez, Laura|||0000-0002-6669-1962
  • Calò, Annalisa
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Pérez-Dieste, Virginia
  • Escudero, Carlos|||0000-0001-8716-9391
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
Polarization dependence of water adsorption and desorption on LiNbO₃ surfaces was demonstrated using X-ray photoelectron spectroscopy (XPS) carried out in situ under near-ambient conditions. Positive and negative (0001) faces (z-cut) of the same crystal were compared for the same temperature and pressure conditions. Our results indicate a preferential adsorption on the positive face of the crystal with increasing water pressure and also higher desorption temperature of the adsorbed molecular water at the positive face. Adsorption measurements on the (1100) face (y-cut) showed also strong affinity to water, as observed for the z-cut positive surface. We found a direct relation between the capacity of the surface to discharge and/or to screen surface charges and the affinity for water of each face. XPS spectra indicate the presence of OH groups at the surface for all the conditions and surfaces measured.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Self-Arranged Misfit Dislocation Network Formation upon Strain Release in La0.7Sr0.3MnO3/LaAlO3(100) Epitaxial Films under Compressive Strain

  • Santiso, José|||0000-0003-4274-2101
  • Roqueta, Jaume
  • Bagués, Núria|||0000-0002-9360-0915
  • Frontera, Carlos|||0000-0002-0091-4756
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Lu, Qiyang
  • Yildiz, Bilge
  • Martínez, Benjamín|||0000-0001-9879-7748
  • Pomar, Alberto|||0000-0002-5855-2356
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
Lattice-mismatched epitaxial films of LaSrMnO (LSMO) on LaAlO (001) substrates develop a crossed pattern of misfit dislocations above a critical thickness of 2.5 nm. Upon film thickness increases, the dislocation density progressively increases, and the dislocation spacing distribution becomes narrower. At a film thickness of 7.0 nm, the misfit dislocation density is close to the saturation for full relaxation. The misfit dislocation arrangement produces a 2D lateral periodic structure modulation (Λ≈ 16 nm) alternating two differentiated phases: one phase fully coherent with the substrate and a fully relaxed phase. This modulation is confined to the interface region between film and substrate. This phase separation is clearly identified by X-ray diffraction and further proven in the macroscopic resistivity measurements as a combination of two transition temperatures (with low and high T). Films thicker than 7.0 nm show progressive relaxation, and their macroscopic resistivity becomes similar than that of the bulk material. Therefore, this study identifies the growth conditions and thickness ranges that facilitate the formation of laterally modulated nanocomposites with functional properties notably different from those of fully coherent or fully relaxed material.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Giant reversible nanoscale piezoresistance at room temperature in Sr₂IrO₄ thin films

  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • López-Mir, Laura|||0000-0002-5279-8849
  • Paradinas, Markos|||0000-0003-1006-9506
  • Holy, Vaclav
  • Železný, Jakuv
  • Yi, Di
  • Suresha, Siriyara J.
  • Liu, Jian|||0000-0003-4199-1296
  • Rayan Serrao, Claudy
  • Ramesh, Ramamoorthy
  • Ocal García, Carmen|||0000-0001-8790-8844
  • Martí Rovirosa, Xavier
  • Catalan, Gustau|||0000-0003-0214-4828
Layered iridates have been the subject of intense scrutiny on account of their unusually strong spin-orbit coupling, which opens up a narrow bandgap in a material that would otherwise be a metal. This insulating state is very sensitive to external perturbations. Here, we show that vertical compression at the nanoscale, delivered using the tip of a standard scanning probe microscope, is capable of inducing a five orders of magnitude change in the room temperature resistivity of Sr₂IrO₄. The extreme sensitivity of the electronic structure to anisotropic deformations opens up a new angle of interest on this material, with the giant and fully reversible perpendicular piezoresistance rendering iridates as promising materials for room temperature piezotronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A solar transistor and photoferroelectric memory

  • Perez-Tomas, Amador|||0000-0002-0551-3142
  • Lima, F. Anderson S.
  • Billon, Quentin
  • Shirley, Ian
  • Catalan, Gustau|||0000-0003-0214-4828
  • Lira-Cantu, Monica|||0000-0002-3393-7436
This study presents a new self-powered electronic transistor concept "the solar transistor." The transistor effect is enabled by the functional integration of a ferroelectric-oxide thin film and an organic bulk heterojunction. The organic heterojunction efficiently harvests photon energy and splits photogenerated excitons into free electron and holes, and the ferroelectric film acts as a switchable electron transport layer with tuneable conduction band offsets that depend on its polarization state. This results in the device photoconductivity modulation. All this (i.e., carrier extraction and poling) is achieved with only two sandwiched electrodes and therefore, with the role of the gating electrode being taken by light. The two-terminal solar-powered phototransistor (or solaristor) thus has the added advantages of a compact photodiode architecture in addition to the nonvolatile functionality of a ferroelectric memory that is written by voltage and nondestructively read by light.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

At-line multi-angle light scattering detector for faster process development in enveloped virus-like particle purification

  • Pereira Aguilar, P.
  • González-Domínguez, Irene|||0000-0002-7920-5505
  • Schneider, Tobias Amadeus
  • Gòdia, Francesc|||0000-0002-4060-9887
  • Cervera Gracia, Laura|||0000-0002-3639-2793
  • Jungbauer, Alois|||0000-0001-8182-7728
At-line static light scattering and fluorescence monitoring allows direct in-process tracking of fluorescent virus-like particles. We have demonstrated this by coupling at-line multi-angle light scattering and fluorescence detectors to the downstream processing of enveloped virus-like particles. Since light scattering intensity is directly proportional to particle concentration, our strategy allowed a swift identification of product containing fractions and rapid process development. Virus-like particles containing the Human Immunodeficiency Virus-1 Gag protein fused to the Green Fluorescence protein were produced in Human Embryonic Kidney 293 cells by transient transfection. A single-column anion-exchange chromatography method was used for direct capture and purification. The majority of host-cell protein impurities passed through the column without binding. Virus-like particles bound to the column were eluted by linear or step salt gradients. Particles recovered in the step gradient purification were characterized by nanoparticle tracking analysis, size exclusion chromatography coupled to multi-angle light scattering and fluorescence detectors and transmission electron microscopy. A total recovery of 66% for the fluorescent particles was obtained with a 50% yield in the main product peak. Virus-like particles were concentrated 17-fold to final a concentration of 4.45 × 10 particles/mL. Simple buffers and operation make this process suitable for large scale purposes.