Skip to main content

PAREDES DE DOMINIO, INTERFASES Y DOMINIOS DE ANTIFASE EN ANTIFERROELECTRICOS

MAT2016-77100-C2-1-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 42
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An in operando study of chemical expansion and oxygen surface exchange rates in epitaxial GdBaCo2O5.5 electrodes in a solid-state electrochemical cell by time-resolved X-ray diffraction

  • Chatterjee, Arindom
  • Caicedo, José Manuel
  • Ballesteros, Belén
  • Santiso, José
This report explores the fundamental characteristics of epitaxial thin films of a mixed ionic electronic conducting GdBaCo2O5.5±δ (GBCO) material with a layered perovskite structure, relevant for use as an active electrode for the oxygen reduction and evolution reactions in electrochemical devices. Time-resolved X-ray diffraction in combination with voltage step chrono-amperometric measurements in a solid state electrochemical cell provides a deeper insight into the chemical expansion mechanism in the GBCO electrode. The chemical expansion coefficient along the c-axis, αc, shows a negative value upon the compound oxidation contrary to standard perovskite materials with disordered oxygen vacancies. Chemical expansion also shows a remarkable asymmetry from αc = −0.037 to −0.014 at δ < 0 and δ > 0, respectively. This change in chemical expansion is an indication of a different mechanism of the structural changes associated with the variable Co cation oxidation state from Co2+ → Co3+ → Co4+. Since redox reactions are dominated by oxygen surface exchange between the GBCO electrode and gas atmosphere, monitoring the time response of the structural changes allows for direct determination of oxygen reduction and evolution reaction kinetics. The reaction kinetics are progressively slowed down upon reduction in the δ < 0 oxygen stoichiometry region, while they maintain a high catalytic activity in the δ > 0 region, in agreement with the structural changes and the electronic carrier delocalization when crossing δ = 0. This work validates the time-resolved XRD technique for fast and reversible measurements of electrode activity in a wide range of oxygen non-stoichiometry in a solid-state electrochemical cell operating under realistic working conditions., The authors acknowledge the support from projects: MINECO ref. MAT2016-77100-C2-1-P; CNRS-CSIC PICS Project ref. 261091, the EU for funding through project H2020-MSCA-RISE-2014 ref. 645658, and the AGAUR agency for 2017SGR. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2013-0295). A. C. particularly acknowledges the support of Severo Ochoa programme for his PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Flexoelectricity in antiferroelectrics

  • Vales-Castro, Pablo
  • Roleder, Krystian
  • Zhao, Lei
  • Li, Jing-Feng
  • Kajewski, Dariusz
  • Catalán, Gustau
Flexoelectricity (coupling between polarization and strain gradients) is a property of all dielectric materials that has been theoretically known for decades, but only relatively recently it has begun to attract experimental attention. As a consequence, there are still entire families of materials whose flexoelectric performance is unknown. Such is the case of antiferroelectrics: materials with an antiparallel but switchable arrangement of dipoles. These materials are expected to be flexoelectrically relevant because it has been hypothesised that flexoelectricity could be linked to the origin of their antiferroelectricity. In this work, we have measured the flexoelectricity of two different antiferroelectrics (PbZrO3 and AgNbO3) as a function of temperature, up to and beyond their Curie temperature. Although their flexocoupling shows a sharp peak at the antiferroelectric phase transition, neither flexoelectricity nor the flexocoupling coefficients are anomalously high, suggesting that it is unlikely that flexoelectricity causes antiferroelectricity., We acknowledge financial support from ICN2, which is funded by the CERCA Programme/Generalitat de Catalunya; ICN2 is supported by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. SEV-2013-0295). We also acknowledge support from Plan Nacional (MINECO Grant No. MAT2016-77100-C2-1-P), ERC Starting Grant No. 308023, MINECO Grant No. BES-2016-077392, the National Science Centre of Poland (Project No. 2016/21/B/ST3/02242), as well as the Ministry of Science and Technology of China (Grant No. 2015CB654605)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Piezoelectric mimicry of flexoelectricity

  • Abdollahi, Amir
  • Vasquez-Sancho, Fabian
  • Catalán, Gustau
The origin of “giant” flexoelectricity, orders of magnitude larger than theoretically predicted, yet frequently observed, is under intense scrutiny. There is mounting evidence correlating giant flexoelectriclike effects with parasitic piezoelectricity, but it is not clear how piezoelectricity (polarization generated by strain) manages to imitate flexoelectricity (polarization generated by strain gradient) in typical beam-bending experiments, since in a bent beam the net strain is zero. In addition piezoelectricity changes sign under space inversion but giant flexoelectricity is insensitive to space inversion, seemingly contradicting a piezoelectric origin. Here we show that, if a piezoelectric material has its piezoelectric coefficient asymmetrically distributed across the sample, it will generate a nonzero bending-induced polarization impossible to distinguish from true flexoelectricity even by inverting the sample. The effective flexoelectric coefficient caused by piezoelectricity is functionally identical to, and often larger than, intrinsic flexoelectricity: our calculations show that, for standard perovskite ferroelectrics, even a tiny gradient of piezoelectricity (1% variation of piezoelectric coefficient across 1 mm) is sufficient to yield a giant effective flexoelectric coefficient of 1 μC/m, three orders of magnitude larger than the intrinsic expectation value., This research was funded by an ERC Starting grant (ERC 308023), by the Severo Ochoa Excellence Programme (SEV-2013-0295), by MINECO Project No. MAT2016-77100-C2-1-P, and by the CERCA Programme from the Generalitat de Catalunya. F. V.-S. thanks UCR, MICITT and CONICIT for support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Converse flexoelectricity yields large piezoresponse force microscopy signals in non-piezoelectric materials

  • Abdollahi, Amir
  • Domingo, Neus
  • Arias, Irene
  • Catalán, Gustau
Converse flexoelectricity is a mechanical stress induced by an electric polarization gradient. It can appear in any material, irrespective of symmetry, whenever there is an inhomogeneous electric field distribution. This situation invariably happens in piezoresponse force microscopy (PFM), which is a technique whereby a voltage is delivered to the tip of an atomic force microscope in order to stimulate and probe piezoelectricity at the nanoscale. While PFM is the premier technique for studying ferroelectricity and piezoelectricity at the nanoscale, here we show, theoretically and experimentally, that large effective piezoelectric coefficients can be measured in non-piezoelectric dielectrics due to converse flexoelectricity., G.C. and N.D. acknowledge financial support from ERC Starting grant 308023, from Plan Nacional project MINECO Grant MAT2016-77100-C2-1-P and FIS2015-73932-JIN and support of Generalitat de Catalunya (Grant No. 2017-SGR-579). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2017-0706) and the CERCA Programme / Generalitat de Catalunya. I.A. acknowledges the support of the Generalitat de Catalunya through the prize “ICREA Academia” for excellence in research and of the European Research Council (StG-679451). I.A. and A.A. also acknowledge the support of Generalitat de Catalunya (Grant No. 2017-SGR-1278)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Flexoelectric fracture-ratchet effect in ferroelectrics

  • Cordero-Edwards, Kumara
  • Kianirad, Hoda
  • Canalias, Carlota
  • Sort, Jordi
  • Catalán, Gustau
The propagation front of a crack generates large strain gradients and it is therefore a strong source of gradient-induced polarization (flexoelectricity). Herein, we demonstrate that, in piezoelectric materials, a consequence of flexoelectricity is that crack propagation is helped or hindered depending on whether it is parallel or antiparallel to the piezoelectric polar axis. The discovery of crack propagation asymmetry proves that fracture physics cannot be assumed to be symmetric in polar materials, and indicates that flexoelectricity should be incorporated in any realistic model., K. C.-E. and G. C. acknowledge ERC Starting Grant No. 308023, MINECO Grant No. MAT2016-77100-C2-1-P from Spain and AGAUR Grant No. 2017-SGR-00579 from Catalonia. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706), and also funded by the CERCA Programme / Generalitat de Catalunya. H. K. and C. C. acknowledge the Swedish Research Council for generous support. The work of J. S. has been partially funded by the 2017-SGR-292 project from the Generalitat de Catalunya and the MAT2017-86357-C3-1-R project from the Spanish Ministerio de Economía y Competitividad (MINECO), cofinanced by the ‘Fondo Europeo de Desarrollo Regional (FEDER)’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Giant bulk photovoltaic effect in solar cell architectures with ultra-wide bandgap Ga2O3 transparent conducting electrodes

  • Pérez-Tomás, Amador
  • Chikoidze, Ekaterine
  • Dumont, Yves
  • Jennings, Michael R.
  • Russell, Stephen A. O.
  • Vales-Castro, Pablo
  • Catalán, Gustau
  • Lira-Cantú, Mónica
  • Ton-That, C.
  • Teherani, Ferechteh H.
  • Sandana, Eric V.
  • Bove, Philippe
  • Rogers, David J.
The use of ultra-wide bandgap transparent conducting beta gallium oxide (β-Ga2O3) thin films as electrodes in ferroelectric solar cells is reported. In a new material structure for energy applications, we report a solar cell structure (a light absorber sandwiched in between two electrodes - one of them - transparent) which is not constrained by the Shockley–Queisser limit for open-circuit voltage (Voc) under typical indoor light. The solar blindness of the electrode enables a record-breaking bulk photovoltaic effect (BPE) with white light illumination (general use indoor light). This work opens up the perspective of ferroelectric photovoltaics which are not subject to the Shockley-Queisser limit by bringing into scene solar-blind conducting oxides., APT acknowledges Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) under contract ENE2015-74275-JIN. GC and PV also acknowledge financial support from the Generalitat de Catalunya (Grant 2017 SGR 579) and MINECO (National Plan MAT2016-77100-C2-1-P). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced thermoelectric properties of lightly Nb doped SrTiO3 thin films

  • Bhansali, S.
  • Khunsin, W.
  • Chatterjee, A.
  • Santiso, José
  • Abad, B.
  • Martín-González, Marisol
  • Jakob, Gerhard
  • Sotomayor Torres, C. M.
  • Chávez-Angel, Emigdio
Novel thermoelectric materials developed for operation at room temperature must have similar or better performance along with being as ecofriendly as those commercially used, e.g., BiTe, in terms of their toxicity and cost. In this work, we present an in-depth study of the thermoelectric properties of epitaxial Nb-doped strontium titanate (SrTiNbO) thin films as a function of (i) doping concentration, (ii) film thickness and (iii) substrate type. The excellent crystal quality was confirmed by high resolution transmission electron microscopy and X-ray diffraction analysis. The thermoelectric properties were measured by the three-omega method (thermal conductivity) and van der Pauw method (electrical resistivity), complemented by Seebeck coefficient measurements. A maximum power factor of 8.9 × 10 W m K and a thermoelectric figure of merit of 0.49 were measured at room temperature in 50 nm-thick films grown on lanthanum strontium aluminate. The mechanisms behind this high figure of merit are discussed in terms of a possible two-dimensional electron gas, increase of the effective mass of the electrons, electron filtering and change in strain due to different substrates. The overall enhancement of the thermoelectric properties suggests that SrTiNbO is a very promising n-type candidate for room- to high-temperature applications., The Catalan Institute of Nanoscience and Nanotechnology (ICN2) acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2017-0706) and funding from the CERCA Programme/Generalitat de Catalunya. Funding from the Spanish Ministry MINECO/FEDER: FIS2015-70862-P PHENTOM is also acknowledged. AC and JS acknowledge support from the projects MINECO ref. MAT2016-77100-C2-1-P and CNRS-CSIC PICS Project ref. 261091, the EU for funding through project H2020-MSCA-RISE-2014 ref. 645658, and the AGAUR agency for support through project 2017SGR.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Periodicity-doubling cascades: Direct observation in ferroelastic materials

  • Everhardt, Arnoud S.
  • Damerio, Silvia
  • Zorn, Jacob A.
  • Zhou, Silang
  • Domingo, Neus
  • Catalán, Gustau
  • Salje, Ekhard K. H.
  • Chen, Long-Qing
  • Noheda, Beatriz
Very sensitive responses to external forces are found near phase transitions. However, transition dynamics and preequilibrium phenomena are difficult to detect and control. We have observed that the equilibrium domain structure following a phase transition in ferroelectric and ferroelastic BaTiO3 is attained by halving of the domain periodicity multiple times. The process is reversible, with periodicity doubling as temperature is increased. This observation is reminiscent of the period-doubling cascades generally observed during bifurcation phenomena, and, thus, it conforms to the “spatial chaos” regime earlier proposed by Jensen and Bak [Phys. Scr. T 9, 64 (1985)] for systems with competing spatial modulations., A. S. E., S. D., and B. N. acknowledge financial support from the alumni organization of the University of Groningen, De Aduarderking (Ubbo Emmius Fonds). Parts of this research were carried out at the light source Petra III at DESY, a member of the Helmholtz Association (HGF). G. C. and N. D. acknowledge Projects No. FIS2015-73932-JIN and No. MAT2016-77100-C2-1-P from the Spanish MINECO and Project No. 2017-SGR-579 from the Generalitat de Catalunya. All work at ICN2 is also supported by the Severo Ochoa Program (Grant No. SEV-2017-0706). The work at Penn State is supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Materials Sciences and Engineering, under Award No. FG02-07ER46417 (J. A. Z. and L.-Q. C.) and, partially, by a graduate fellowship from the 3M Company (J. A. Z.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Control of lateral composition distribution in graded films of soluble solid systems A1−xBx by partitioned dual-beam pulsed laser deposition

  • Sakai, Joe
  • Caicedo, José Manuel
  • Vales-Castro, Pablo
  • Padilla-Pantoja, Jessica
  • Sauthier, Guillaume
  • Catalán, Gustau
  • Santiso, José
This article belongs to the Special Issue Advances in Multi-Target Physical Vapor Deposition Techniques., Lateral compositionally-graded thin films are powerful media for the observation of phase boundaries as well as for high-throughput materials exploration. We herein propose a method to prepare epitaxial lateral compositionally-graded films using a dual-beam pulsed laser deposition (PLD) method with two targets separated by a partition. Tuning the ambient pressure and the partition—substrate gap makes it possible to control of the gradient length of the deposits at the small sizes (≤ 10 mm) suitable for commercial oxide single crystal substrates. A simple Monte Carlo simulation qualitatively reproduced the characteristic features of the lateral thickness distribution. To demonstrate this method, we prepared (1−x)PbTiO3—xPbZrO3 and (1−x)LaMnO3—xLa0.6Sr0.4MnO3 films with lateral composition gradient widths of 10 and 1 mm, respectively, with the partitioned dual PLD., This research was supported by Spanish Ministry of Competitiveness (project MAT2016-77100-C2-1-P) and the AGAUR agency (project 2017SGR). ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Large thermoelectric power variations in epitaxial thin films of layered perovskite GdBaCo2O5.5±δ with a different preferred orientation and strain

  • Chatterjee, Arindom
  • Chávez-Angel, Emigdio
  • Ballesteros, Belén
  • Caicedo, José Manuel
  • Padilla-Pantoja, Jessica
  • Leborán, Victor
  • Sotomayor Torres, C. M.
  • Rivadulla, Francisco
  • Santiso, José
This work describes the growth of thin epitaxial films of the layered perovskite material GdBaCo2O5.5±δ (GBCO) on different single crystal substrates SrTiO3 (STO), (LaAlO3)0.3(Sr2TaAlO6)0.7 (LSAT) and LaAlO3 (LAO) as an approach to study changes in the thermoelectric properties by means of the induced epitaxial strain. In addition to strain changes, the films grow with considerably different preferred orientations and domain microstructures: GBCO films on STO are purely c-axis oriented (c⊥) with an average 0.18% in-plane tensile strain; GBCO on LSAT is composed of domains with a mixed orientation (c‖ and c⊥) with an average 0.71% in-plane compressive strain; while on LAO it is b-axis oriented (c‖) with an average 0.89% in-plane compressive strain. These differences result in important cell volume changes, as well as in the orthorhombicity of the a–b plane of the GBCO structure, which in turn induce a change in the sign and temperature dependence of the thermopower, while the electrical conductivity remains almost unchanged. In general, compressively strained films show negative S thermopower (n-type) while tensile strained films show a positive S (p-type) at low temperatures, probing the adaptive nature of the GdBaCo2O5.5±δ compound. These results point to the spontaneous generation of oxygen vacancies to partially accommodate the epitaxial stress as the main cause for this effect., This work was supported by the projects: MINECO ref. MAT2016-77100-C2-1-P and CNRS-CSIC PICS Project ref. 261091, the EU for funding through project H2020-MSCA-RISE-2014 ref. 645658, and the AGAUR agency for 2017SGR327. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2017-0706). CMS and ECA acknowledge support from the support from the Spanish MICINN project SIP (PGC2018-101743-B-I00). AC particularly acknowledges the support of the Severo Ochoa programme and ICN2 for his PhD grant. FR acknowledges support from MAT2016-80762-R, Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2016–2019, ED431G/09), by the European Union (European Regional Development Fund-ERDF) and the European Commission through the Horizon H2020 funding by H2020-MSCA-RISE-2016-Project No. 734187 – SPICOLOST., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mechanical softness of ferroelectric 180° domain walls

  • Stefani, Christina
  • Ponet, Louis
  • Shapovalov, Konstantin
  • Chen, Peng
  • Langenberg, Eric
  • Schlom, Darrell G.
  • Artyukhin, Sergey
  • Stengel, Massimiliano
  • Domingo, Neus
  • Catalán, Gustau
Using scanning probe microscopy, we measure the out-of-plane mechanical response of ferroelectric 180° domain walls and observe that, despite separating domains that are mechanically identical, the walls appear mechanically distinct—softer—compared to the domains. This effect is observed in different ferroelectric materials (LiNbO3, BaTiO3, and PbTiO3) and with different morphologies (from single crystals to thin films), suggesting that the effect is universal. We propose a theoretical framework that explains the domain wall softening and justifies that the effect should be common to all ferroelectrics. The lesson is, therefore, that domain walls are not only functionally different from the domains they separate, but also mechanically distinct., C. S. thanks BIST for the PREBIST Grant. This projecthas received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 754558. E. L. acknowledges the funding received from the European Union’s Horizon 2020 research and innovation program through the Marie Skłodowska-Curie Actions: Individual Fellowship-Global Fellowship (Ref. No. MSCA-IF-GF708129). M. S. and K. S. acknowledge the support of the European Research Council under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 724529), Ministerio de Economia, Industria y Competitividad through Grants No. MAT2016- 77100-C2-2-P and No. SEV-2015-0496, and the Generalitat de Catalunya (Grant No. 2017SGR 1506). G. C. acknowledge the support of the Ministerio de Economía, Industria y Competitividad, Agencia Estatal de Investigación/Fondo Europeo de Desarrollo Regional and European Union through Grant No. MAT2016-77100-C2-1-P (MINECO/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-Pixelation Through Fracture in VO2 Thin Films

  • Rodríguez, Laura
  • Del Corro, Elena
  • Conroy, Michele
  • Moore, Kalani
  • Sandiumenge, Felip
  • Domingo, Neus
  • Santiso, José
  • Catalán, Gustau
Vanadium dioxide (VO2) is an archetypal Mott material with a metal–insulator transition (MIT) at near room temperature. In thin films, this transition is affected by substrate-induced strain but as film thickness increases, the strain is gradually relaxed and the bulk properties are recovered. Epitaxial films of VO2 on (001)-oriented rutile titanium dioxide (TiO2) relax substrate strain by forming a network of fracture lines that crisscross the film along well-defined crystallographic directions. This work shows that the electronic properties associated with these lines result in a pattern that resembles a “street map” of fully strained metallic VO2 blocks separated by insulating VO2 stripes. Each block of VO2 is thus electronically self-insulated from its neighbors, and its MIT can be locally induced optically with a laser, or electronically via the tip of a scanning probe microscope so that the films behave functionally as self-patterned pixel arrays., This work was supported from the Spanish Ministry of Economy, Industry and Competitiveness (project: MAT2016- 77100-C2-1-P), the Catalan AGAUR agency for 2017SGR, and the Science Foundation Ireland (SFI 16/US/3344). ICN2 is funded by the CERCA programme/Generalitat de Catalunya and the Severo Ochoa programme (SEV-2017-0706). L.R. particularly acknowledges the support of the Severo Ochoa program and ICN2 for her Ph.D. grant. E.d.C. acknowledges the Spanish “Juan de la Cierva” grant (JC-2015-25201) and the research project FIS2017-85787. M.C. acknowledges funding from SFI Industry Fellowship (18/IF/6282)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photoflexoelectric effect in halide perovskites

  • Shu, Longlong
  • Ke, Shanming
  • Fei , Linfeng
  • Huang, Wenbin
  • Wang, Zhiguo
  • Gong, Jinhui
  • Jiang, Xiaoning
  • Wang, Li
  • Li, Fei
  • Lei, Shuijin
  • Rao, Zhenggang
  • Zhou, Yangbo
  • Zheng, Ren-Kui
  • Yao, Xi
  • Wang, Yu
  • Stengel, Massimiliano
  • Catalán, Gustau
Harvesting environmental energy to generate electricity is a key scientific and technological endeavour of our time. Photovoltaic conversion and electromechanical transduction are two common energy-harvesting mechanisms based on, respectively, semiconducting junctions and piezoelectric insulators. However, the different material families on which these transduction phenomena are based complicate their integration into single devices. Here we demonstrate that halide perovskites, a family of highly efficient photovoltaic materials1,2,3, display a photoflexoelectric effect whereby, under a combination of illumination and oscillation driven by a piezoelectric actuator, they generate orders of magnitude higher flexoelectricity than in the dark. We also show that photoflexoelectricity is not exclusive to halides but a general property of semiconductors that potentially enables simultaneous electromechanical and photovoltaic transduction and harvesting in unison from multiple energy inputs., This work was supported by the National Natural Science Foundation of China under grant nos. 51962020, 51972157, 11574126 and 11604135, and partly by the National Key Research and Development Plan of China (2017YFB0406300). L.S. and S.K. thank Nanchang University for support. G.C. acknowledges support from the Generalitat de Catalunya (Grant 2017 SGR 579) and from MINECO (National Plan MAT2016-77100-C2-1-P and Severo Ochoa SEV-2017-0706). M.S. acknowledges the support of MINECO through grants no. MAT2016-77100-C2-2-P and no. SEV-2015-0496, Generalitat de Catalunya (grant no. 2017 SGR1506) and the European Research Council under the European Union’s Horizon 2020 research and innovation programme (grant no. 724529). We thank D Torres for the graphic design of Fig. 2a,b., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metallic diluted dimerization in VO2 tweeds

  • Sandiumenge, Felip
  • Rodríguez, Laura
  • Pruneda, Miguel
  • Magén, César
  • Santiso, José
  • Catalán, Gustau
The observation of electronic phase separation textures in vanadium dioxide, a prototypical electron‐correlated oxide, has recently added new perspectives on the long standing debate about its metal–insulator transition and its applications. Yet, the lack of atomically resolved information on phases accompanying such complex patterns still hinders a comprehensive understanding of the transition and its implementation in practical devices. In this work, atomic resolution imaging and spectroscopy unveils the existence of ferroelastic tweed structures on ≈5 nm length scales, well below the resolution limit of currently used spectroscopic imaging techniques. Moreover, density functional theory calculations show that this pretransitional fine‐scale tweed, which on average looks and behaves like the standard metallic rutile phase, is in fact weaved by semi‐dimerized chains of vanadium in a new monoclinic phase that represents a structural bridge to the monoclinic insulating ground state. These observations provide a multiscale perspective for the interpretation of existing data, whereby phase coexistence and structural intermixing can occur all the way down to the atomic scale., The authors thank Prof. Enric Canadell for enlightening discussions. The authors also thank Prof. Etienne Snoeck and Dr. Christophe Gatel for obtaining HRTEM images of the 80 nm‐thick film at CEMES (Toulouse), and Dr. Belén Ballesteros for assistance during preliminary TEM observations. F.S. acknowledges the Spanish Ministry of Industry, Economy and Competitiveness (MINECO) for financial support through the “Severo Ochoa” programme for Centers of Excellence in R&D (SEV‐2015‐0496) and Project No. RTI2018‐098537‐B‐C21. G.C., J.S., and L.R. acknowledge financial support from MINECO (Grant No. MAT2016‐77100‐C2‐1‐P) and the Catalan Government (Generalitat de Catalunya, Grant No. 2017 SGR 579). M.P. acknowledges financial support from Spanish MICIU, AEI and EU FEDER (Grant No. PGC2018‐096955‐B‐C43) and Generalitat de Catalunya (Grant No. 2017SGR1506). Research at ICN2 was also supported by the CERCA programme (Generalitat de Catalunya) and by the “Severo Ochoa” programme for Centers of Excellence in R&D of MINECO (Grant No. SEV‐2017‐0706). C.M. acknowledges funding from MINECO under Project No. MAT2017‐82970‐C2‐R and from the European's Union Horizon 2020 research and innovation programme under Grant No. 823717‐ESTEEM3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct Visualization of Anti-Ferroelectric Switching Dynamics via Electrocaloric Imaging

  • Vales-Castro, Pablo
  • Vellvehi Hernández, Miquel
  • Perpiñá Giribet, Xavier
  • Caicedo, José Manuel
  • Jordà, Xavier
  • Faye, Romain
  • Roleder, Krystian
  • Kajewski, Dariusz
  • Pérez-Tomás, Amador
  • Defay, Emmanuel
  • Catalán, Gustau
The large electrocaloric coupling in PbZrO3 allows using high-speed infrared imaging for visualizing anti-ferroelectric switching dynamics via the associated temperature change. It is found that in ceramic samples of homogeneous temperature and thickness, switching is fast due to the generation of multiple nucleation sites, with devices responding in the millisecond range. By introducing gradients of thickness, however, it is possible to change the dynamics to propagation limited, whereby a single-phase boundary sweeps across the sample like a cold front, at a speed of ≈20 cm s−1. Additionally, introducing thermostatic temperature differences between two sides of the sample enables the simultaneous generation of a negative electrocaloric effect on one side and a positive one on the other, yielding a Janus-like electrocaloric response., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (SEV-2017-0706), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Origin of large negative electrocaloric effect in antiferroelectric PbZrO3

  • Vales-Castro, Pablo
  • Faye, Romain
  • Vellvehí Hernández, Miquel
  • Nouchokgwe, Youri
  • Perpiñá, Xavier
  • Caicedo, José Manuel
  • Jordà, Xavier
  • Roleder, Krystian
  • Kajewski, Dariusz
  • Pérez-Tomás, Amador
  • Defay, Emmanuel
  • Catalán, Gustau
We have studied the electrocaloric response of the archetypal antiferroelectric PbZrO3 as a function of voltage and temperature in the vicinity of its antiferroelectric-paraelectric phase transition. Large electrocaloric effects of opposite signs, ranging from an electrocooling of −3.5 K to an electroheating of +5.5K, were directly measured with an infrared camera. We show by calorimetric and electromechanical measurements that the large negative electrocaloric effect comes from an endothermic antiferroelectric-ferroelectric switching, in contrast to dipole destabilization of the antiparallel lattice, previously proposed as an explanation for the negative electrocaloric effect of antiferroelectrics., We acknowledge financial support to ICN2, which is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. SEV-2017-0706). We also acknowledge support to Plan Nacional (MINECO Grant No. MAT2016-77100-C2-1-P) and MINECO Grant No. BES-2016-077392. R.F., Y.N., and E.D acknowledge the Luxembourg National Research Fund (FNR) for funding part of this research through the Projects No. CAMELHEAT/C17/MS/11703691/Defay and No. COFERMAT/P12/4853155/Kreisel. This work was also supported in part by the Spanish Ministry of Science, Innovation and Universities under the HIPERCELLS Project No. RTI2018-098392-B-I00, the Regional Government of the Generalitat de Catalunya under Grants No. 2017 SGR 1384 and No. 217 SGR 1384, the Consejo Superior de Investigaciones Científicas through internal research programs with Identification No. 201850I063 and No. 201950E036. This work was also supported by the National Science Centre, Poland, within the Project No. 2016/21/B/ST3/02242., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strong strain gradients and phase coexistence at the metal-insulator transition in VO2 epitaxial films

  • Rodríguez, Laura
  • Sandiumenge, Felip
  • Frontera, Carlos
  • Caicedo, José Manuel
  • Padilla-Pantoja, Jessica
  • Catalán, Gustau
  • Santiso, José
The proximity of a thermodynamic triple point and the formation of transient metastable phases may result in complex phase and microstructural trajectories across the metal-insulator transition in strained VO2 films. A detailed analysis using in-situ synchrotron X-ray diffraction unveils subtle fingerprints of this complexity in the structure of epitaxial films. During phase transition the low-temperature monoclinic M1 phase is constrained along the {111}R planes by the coexisting high-temperature R phase domains, which remain epitaxially clamped to the substrate. This geometrical constraint induces counteracting local stresses that result in a combined tilt and uniaxial in-plane compression of M1 domains, and a concomitant anomalous cR-axis elongation. This mechanism progressively transforms the M1 phase into the transitional triclinic phase (T), and ultimately into the monoclinic M2 phase, generating strong strain and tilt gradients that remain frozen after the complete transformation of the R phase upon cooling to RT. The transformation path of VO2 films, the complex competition between stable and metastable VO2 polymorphs and its impact on the structure of the low temperature monoclinic state, provide essential insights for understanding the electronic and mechanical properties of the films at the nanoscale, as well as to control their use in functional devices., This work was supported in part by the Spanish Ministry of Economy, Industry and Competitiveness (projects MAT2016-77100-C2-1-P and PID2019-108573GB-C21), and by the Catalan AGAUR agency (project: 2017-SGR-579). ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme (SEV-2017-0706). LR acknowledges the support of Severo Ochoa programme and ICN2 for her PhD grant. Part of the measurements were carried out at the KMC-II instrument at Helmholtz-Zentrum Berlin für Materialien und Energie. Besides, we would like to thank Dr. D. Többens for assistance during the KMC-II experiment. The research leading to this result has been partially supported by the project CALIPSO plus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. F.S. acknowledges the Spanish Ministry of Industry, Economy and Competitiveness (MINECO) for financial support through the “Severo Ochoa” programme for Centers of Excellence in R&D (SEV-2015-0496) and project no. RTI2018-098537-B-C21. The authors acknowledge the support of Dr. E. del Corro for the micro-Raman analysis of the films., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improved High Temperature Thermoelectric Properties in Misfit Ca3Co4O9 by Thermal Annealing

  • Chatterjee, Arindom
  • Sachat, Alexandros el
  • Banik, Ananya
  • Biswas, Kanishka
  • Castro-Álvarez, Alejandro
  • Sotomayor Torres, C. M.
  • Santiso, José
  • Chávez-Angel, Emigdio
Ca3Co4O9, a p-type thermoelectric material based on transition-metal oxides, has garnered significant interest due to its potential in thermoelectric applications. Its unique misfit-layered crystal structure contributes to low thermal conductivity and a high Seebeck coefficient, leading to a thermoelectric figure of merit (zT) of ≥1 at 1000 K. Conventionally, it has been believed that thermopower reaches its upper limit above 200 K. However, our thermopower measurements on polycrystalline Ca3Co4O9 samples have revealed an unexpected increase in thermopower above 380 K. In this study, we investigate the effects of high oxygen pressure annealing on Ca3Co4O9 and provide an explanation based on the mixed oxide states of cobalt and carrier hopping. Our results demonstrate that annealing induces modifications in the defect chemistry of Ca3Co4O9, leading to a decrease in electron hopping probability and the emergence of a thermal activation-like behavior in thermopower. These findings carry significant implications for the design and optimization of thermoelectric materials based on misfit cobaltates, opening new avenues for enhanced thermoelectric performance., This research was funded by MINECO ref. MAT2016-77100-C2-1-P; CNRS-CSIC PICS Project ref. 261091, the EU for funding through project H2020-MSCA-RISE-2014 ref. 645658, and the AGAUR agency for 2017SGR. ICN2 is funded by the CERCA program/Generalitat de Catalunya and by the Severo Ochoa program of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2017-0706). C.M.S.T. and E.C.-Á. acknowledge support from Spanish Ministry MINECO/FEDER: FIS2015-70862-P PHENTOM. A.E.S. acknowledges funding from the EU-H2020 research and innovation program under the Marie Sklodowska Curie Individual Fellowship THERMIC (Grant No. 101029727)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced Thermoelectric Properties of Misfit Bi2Sr2-xCaxCo2Oy: Isovalent Substitutions and Selective Phonon Scattering

  • Chatterjee, Arindom
  • Banik, Ananya
  • Sachat, Alexandros el
  • Caicedo, José Manuel
  • Padilla-Pantoja, Jessica
  • Sotomayor Torres, C. M.
  • Biswas, Kanishka
  • Santiso, José
  • Chávez-Angel, Emigdio
Layered Bi-misfit cobaltates, such as Bi2Sr2Co2Oy, are the natural superlattice of an electrically insulating rocksalt (RS) type Bi2Sr2O4 layer and electrically conducting CoO2 layer, stacked along the crystallographic c-axis. RS and CoO2 layers are related through charge compensation reactions (or charge transfer). Therefore, thermoelectric transport properties are affected when doping or substitution is carried out in the RS layer. In this work, we have shown improved thermoelectric properties of spark plasma sintered Bi2Sr2-xCaxCo2Oy alloys (x = 0, 0.3 and 0.5). The substitution of Ca atoms affects the thermal properties by introducing point-defect phonon scattering, while the electronic conductivity and thermopower remain unaltered., This research was funded by MINECO ref. MAT2016-77100-C2-1-P; CNRS-CSIC PICS Project ref. 261091, the EU for funding through project H2020-MSCA-RISE-2014 ref. 645658, and the AGAUR agency for 2017SGR. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2017-0706). C.M.S.T. and E.C.-A. acknowledge support from Spanish Ministry MINECO/FEDER: FIS2015-70862-P PHENTOM. A.E.S. acknowledges funding from the EU-H2020 research and innovation programme under the Marie Sklodowska Curie Individual Fellowship THERMIC (Grant No. 101029727)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of oxygen stoichiometry on the thermoelectric properties of Bi2Sr2Co2Oy thin films

  • Chatterjee, Arindom
  • El Sachat, Alexandros
  • Sotomayor Torres, C. M.
  • Santiso, José
  • Chávez-Angel, Emigdio
In this study, we present a comprehensive analysis of the thermoelectric (TE) properties of highly c-axis-oriented thin films of layered misfit cobaltates Bi2Sr2Co2Oy. The films exhibit a high c-axis orientation, facilitating precise measurements of electronic transport and TE properties along the a-b crystallographic plane. Our findings reveal that the presence of nearly stoichiometric oxygen content results in high thermopower with metallic conductivity, while the annealing of the films in a reduced oxygen atmosphere eliminates their metallic behavior. According to the well-established Heike's limit, the thermopower tends to become temperature independent when the thermal energy significantly exceeds the bandwidth, which provides a rough estimation of charge carrier density by using the Heike's formula. This observation suggests that the dominant contribution to the thermopower comes from the narrow Co-t2g bands near the Fermi energy. Our study demonstrates that the calculated thermopower value using Heike's formula, based on the Hall electron density of the Bi2Sr2Co2Oy thin films at 300 K, aligns well with the experimental results, shedding light on the intriguing TE properties of this family of layered cobaltate oxide films., This work was supported by the following projects: MINECO ref MAT2016-77100-C2-1-P; CNRS-CSIC PICS project ref. 261091, the EU for funding through project H2020-MSCA-RISE-2014 ref. 645658, and the AGAUR agency for 2017SGR. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2017-0706). AC acknowledges the support from Severo Ochoa programme and ICN2 for his PhD grant. AES acknowledges funding from the EU-H2020 research and innovation program under the ERC grant TheMA (grant no. 101117958). CMST acknowledges the support from Spanish Ministry MINECO/FEDER: FIS2015-70862-P PHENTOM. ECA acknowledges the support from MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Domain wall magnetoresistance in BiFeO₃ thin films measured by scanning probe microscopy

  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Farokhipoor, S.
  • Santiso, José|||0000-0003-4274-2101
  • Noheda, Beatriz|||0000-0001-8456-2286
  • Catalan, Gustau|||0000-0003-0214-4828
We measure the magnetotransport properties of individual 71° domain walls in multiferroic BiFeO₃ by means of conductive-atomic force microscopy (C-AFM) in the presence of magnetic fields up to one Tesla. The results suggest anisotropic magnetoresistance at room temperature, with the sign of the magnetoresistance depending on the relative orientation between the magnetic field and the domain wall plane. A consequence of this finding is that macroscopically averaged magnetoresistance measurements for domain wall bunches are likely to underestimate the magnetoresistance of each individual domain wall.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Converse flexoelectricity yields large piezoresponse force microscopy signals in non-piezoelectric materials

  • Abdollahi, Amir|||0000-0003-0363-4984
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Arias, Irene|||0000-0002-6761-3499
  • Catalan, Gustau|||0000-0003-0214-4828
Converse flexoelectricity is a mechanical stress induced by an electric polarization gradient. It can appear in any material, irrespective of symmetry, whenever there is an inhomogeneous electric field distribution. This situation invariably happens in piezoresponse force microscopy (PFM), which is a technique whereby a voltage is delivered to the tip of an atomic force microscope in order to stimulate and probe piezoelectricity at the nanoscale. While PFM is the premier technique for studying ferroelectricity and piezoelectricity at the nanoscale, here we show, theoretically and experimentally, that large effective piezoelectric coefficients can be measured in non-piezoelectric dielectrics due to converse flexoelectricity.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Flexoelectric fracture-ratchet effect in ferroelectrics

  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Kianirad, Hoda
  • Canalias, Carlot
  • Sort, Jordi|||0000-0003-1213-3639
  • Catalan, Gustau|||0000-0003-0214-4828
The propagation front of a crack generates large strain gradients and it is therefore a strong source of gradient-induced polarization (flexoelectricity). Herein, we demonstrate that, in piezoelectric materials, a consequence of flexoelectricity is that crack propagation is helped or hindered depending on whether it is parallel or antiparallel to the piezoelectric polar axis. The discovery of crack propagation asymmetry proves that fracture physics cannot be assumed to be symmetric in polar materials, and indicates that flexoelectricity should be incorporated in any realistic model.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Periodicity-doubling cascades, direct observation in ferroelastic materials

  • Everhardt, Arnoud S.|||0000-0002-6690-143X
  • Damerio, Silvia
  • Zorn, Jacob A.
  • Zhou, Silang
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Catalan, Gustau|||0000-0003-0214-4828
  • Salje, Ekhard K.  H.
  • Chen, Long-Qing
  • Noheda, Beatriz|||0000-0001-8456-2286
Very sensitive responses to external forces are found near phase transitions. However, transition dynamics and preequilibrium phenomena are difficult to detect and control. We have observed that the equilibrium domain structure following a phase transition in ferroelectric and ferroelastic BaTiO3 is attained by halving of the domain periodicity multiple times. The process is reversible, with periodicity doubling as temperature is increased. This observation is reminiscent of the period-doubling cascades generally observed during bifurcation phenomena, and, thus, it conforms to the "spatial chaos" regime earlier proposed by Jensen and Bak [Phys. Scr. T 9, 64 (1985)PHSTER0281-184710.1088/0031-8949/1985/T9/009] for systems with competing spatial modulations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Flexoelectricity in antiferroelectrics

  • Vales Castro, Pablo|||0000-0001-9181-1789
  • Roleder, Krystian|||0000-0002-2116-2362
  • Zhao, Lei|||0000-0003-0291-2655
  • Li, Jing-Feng|||0000-0002-0185-0512
  • Kajewski, Dariusz|||0000-0002-0196-7489
  • Catalan, Gustau|||0000-0003-0214-4828
Flexoelectricity (coupling between polarization and strain gradients) is a property of all dielectric materials that has been theoretically known for decades, but only relatively recently it has begun to attract experimental attention. As a consequence, there are still entire families of materials whose flexoelectric performance is unknown. Such is the case of antiferroelectrics: materials with an antiparallel but switchable arrangement of dipoles. These materials are expected to be flexoelectrically relevant because it has been hypothesised that flexoelectricity could be linked to the origin of their antiferroelectricity. In this work, we have measured the flexoelectricity of two different antiferroelectrics (PbZrO and AgNbO) as a function of temperature, up to and beyond their Curie temperature. Although their flexocoupling shows a sharp peak at the antiferroelectric phase transition, neither flexoelectricity nor the flexocoupling coefficients are anomalously high, suggesting that it is unlikely that flexoelectricity causes antiferroelectricity.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nanostructural changes upon substitutional Al doping in ZnO sputtered films

  • Landa Cánovas, Ángel R.
  • Santiso, José|||0000-0003-4274-2101
  • Agulló Rueda, Fernando|||0000-0001-9211-1987
  • Herrero, Pilar
  • Navarrete Astorga, Elena
  • Ochoa Martínez, E.
  • Ramos Barrado, José R.
  • Gabás, M.
Al:ZnO layers, with low and high Al content, 0.2% and 2.1% cat. respectively, have been prepared using the RF magnetron sputtering technique. Noticeable differences in the optical and electrical properties have been detected in these films. With doping, the resistivity decreases and the band-gap increases. The alterations in the films crystalline structure are explained in terms of the nanostructural changes induced by Al substitutional doping, such as a higher concentration of edge dislocation defects and a higher rotation of crystalline nanodomains in the plane of the films (normal to the preferential orientation c-axis) for the high content Al:ZnO layer. A complete description of such effects has been accomplished using several characterization techniques, such as X-ray diffraction, Raman spectroscopy and transmission electron microscopy. The combination of these techniques provides an exhaustive understanding of the films nanostructure.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhanced thermoelectric properties of lightly Nb doped SrTiO3 thin films

  • Bhansali, Sweta
  • Khunsin, Worawut
  • Chatterjee, Arindom|||0000-0002-0861-2058
  • Santiso, José|||0000-0003-4274-2101
  • Abad Mayor, Begoña|||0000-0001-7589-7973
  • Martín González, Marisol
  • Jakob, Gerhard|||0000-0001-9466-0840
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
Novel thermoelectric materials developed for operation at room temperature must have similar or better performance along with being as ecofriendly as those commercially used, e.g., BiTe, in terms of their toxicity and cost. In this work, we present an in-depth study of the thermoelectric properties of epitaxial Nb-doped strontium titanate (SrTiNbO) thin films as a function of (i) doping concentration, (ii) film thickness and (iii) substrate type. The excellent crystal quality was confirmed by high resolution transmission electron microscopy and X-ray diffraction analysis. The thermoelectric properties were measured by the three-omega method (thermal conductivity) and van der Pauw method (electrical resistivity), complemented by Seebeck coefficient measurements. A maximum power factor of 8.9 × 10 W m K and a thermoelectric figure of merit of 0.49 were measured at room temperature in 50 nm-thick films grown on lanthanum strontium aluminate. The mechanisms behind this high figure of merit are discussed in terms of a possible two-dimensional electron gas, increase of the effective mass of the electrons, electron filtering and change in strain due to different substrates. The overall enhancement of the thermoelectric properties suggests that SrTiNbO is a very promising n-type candidate for room- to high-temperature applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

An in operando study of chemical expansion and oxygen surface exchange rates in epitaxial GdBaCo2O5.5 electrodes in a solid-state electrochemical cell by time-resolved X-ray diffraction

  • Chatterjee, Arindom|||0000-0002-0861-2058
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Santiso, José|||0000-0003-4274-2101
This report explores the fundamental characteristics of epitaxial thin films of a mixed ionic electronic conducting GdBaCoO (GBCO) material with a layered perovskite structure, relevant for use as an active electrode for the oxygen reduction and evolution reactions in electrochemical devices. Time-resolved X-ray diffraction in combination with voltage step chrono-amperometric measurements in a solid state electrochemical cell provides a deeper insight into the chemical expansion mechanism in the GBCO electrode. The chemical expansion coefficient along the c-axis, α, shows a negative value upon the compound oxidation contrary to standard perovskite materials with disordered oxygen vacancies. Chemical expansion also shows a remarkable asymmetry from α = -0.037 to -0.014 at δ < 0 and δ.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Photoflexoelectric effect in halide perovskites

  • Shu, Longlong|||0000-0002-7121-1652
  • Ke, Shanming|||0000-0003-3204-1416
  • Fei, Linfeng|||0000-0001-7329-0019
  • Huang, Wenbin
  • Wang, Zhiguo|||0000-0001-9409-1334
  • Gong, Jinhui
  • Jiang, Xiaoning
  • Wang, Li
  • Li, Fei|||0000-0002-4572-0322
  • Lei, Shuijin
  • Rao, Zhenggang
  • Zhou, Yangbo
  • Zheng, Ren-Kui
  • Yao, Xi
  • Wang, Yu
  • Stengel, Massimiliano|||0000-0003-4175-3888
  • Catalan, Gustau|||0000-0003-0214-4828
Harvesting environmental energy to generate electricity is a key scientific and technological endeavour of our time. Photovoltaic conversion and electromechanical transduction are two common energy-harvesting mechanisms based on, respectively, semiconducting junctions and piezoelectric insulators. However, the different material families on which these transduction phenomena are based complicate their integration into single devices. Here we demonstrate that halide perovskites, a family of highly efficient photovoltaic materials, display a photoflexoelectric effect whereby, under a combination of illumination and oscillation driven by a piezoelectric actuator, they generate orders of magnitude higher flexoelectricity than in the dark. We also show that photoflexoelectricity is not exclusive to halides but a general property of semiconductors that potentially enables simultaneous electromechanical and photovoltaic transduction and harvesting in unison from multiple energy inputs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Piezoelectric Mimicry of Flexoelectricity

  • Abdollahi, Amir|||0000-0003-0363-4984
  • Vásquez Sancho, Fabián|||0000-0001-8814-2676
  • Catalan, Gustau|||0000-0003-0214-4828
The origin of "giant" flexoelectricity, orders of magnitude larger than theoretically predicted, yet frequently observed, is under intense scrutiny. There is mounting evidence correlating giant flexoelectriclike effects with parasitic piezoelectricity, but it is not clear how piezoelectricity (polarization generated by strain) manages to imitate flexoelectricity (polarization generated by strain gradient) in typical beam-bending experiments, since in a bent beam the net strain is zero. In addition piezoelectricity changes sign under space inversion but giant flexoelectricity is insensitive to space inversion, seemingly contradicting a piezoelectric origin. Here we show that, if a piezoelectric material has its piezoelectric coefficient asymmetrically distributed across the sample, it will generate a nonzero bending-induced polarization impossible to distinguish from true flexoelectricity even by inverting the sample. The effective flexoelectric coefficient caused by piezoelectricity is functionally identical to, and often larger than, intrinsic flexoelectricity: our calculations show that, for standard perovskite ferroelectrics, even a tiny gradient of piezoelectricity (1% variation of piezoelectric coefficient across 1 mm) is sufficient to yield a giant effective flexoelectric coefficient of 1 μC/m, three orders of magnitude larger than the intrinsic expectation value.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Control of lateral composition distribution in graded films of soluble solid systems A1-xBx by partitioned dual-beam pulsed laser deposition

  • Sakai, Joe|||0000-0001-7688-0655
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Vales Castro, Pablo|||0000-0001-9181-1789
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Catalan, Gustau|||0000-0003-0214-4828
  • Santiso, José|||0000-0003-4274-2101
Lateral compositionally-graded thin films are powerful media for the observation of phase boundaries aswell as for high-throughputmaterials exploration.We herein propose amethod to prepare epitaxial lateral compositionally-graded films using a dual-beampulsed laser deposition (PLD)method with two targets separated by a partition. Tuning the ambient pressure and the partition-substrate gap makes it possible to control of the gradient length of the deposits at the small sizes (≤ 10 mm) suitable for commercial oxide single crystal substrates. A simple Monte Carlo simulation qualitatively reproduced the characteristic features of the lateral thickness distribution. To demonstrate this method, we prepared (1-x)PbTiO-xPbZrO and (1-x)LaMnOLaSrMnO films with lateral composition gradient widths of 10 and 1 mm, respectively, with the partitioned dual PLD.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Large thermoelectric power variations in epitaxial thin films of layered perovskite GdBaCo2O5.5±δwith a different preferred orientation and strain

  • Chatterjee, Arindom|||0000-0002-0861-2058
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Leborán, Víctor|||0000-0001-9806-3234
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Rivadulla, Francisco|||0000-0003-3099-0159
  • Santiso, José|||0000-0003-4274-2101
This work describes the growth of thin epitaxial films of the layered perovskite material GdBaCoO(GBCO) on different single crystal substrates SrTiO(STO), (LaAlO)(SrTaAlO)(LSAT) and LaAlO(LAO) as an approach to study changes in the thermoelectric properties by means of the induced epitaxial strain. In addition to strain changes, the films grow with considerably different preferred orientations and domain microstructures: GBCO films on STO are purelyc-axis oriented (c) with an average 0.18% in-plane tensile strain; GBCO on LSAT is composed of domains with a mixed orientation (candc) with an average 0.71% in-plane compressive strain; while on LAO it isb-axis oriented (c) with an average 0.89% in-plane compressive strain. These differences result in important cell volume changes, as well as in the orthorhombicity of thea-bplane of the GBCO structure, which in turn induce a change in the sign and temperature dependence of the thermopower, while the electrical conductivity remains almost unchanged. In general, compressively strained films show negativeSthermopower (n-type) while tensile strained films show a positiveS(p-type) at low temperatures, probing the adaptive nature of the GdBaCoOcompound. These results point to the spontaneous generation of oxygen vacancies to partially accommodate the epitaxial stress as the main cause for this effect.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Mechanical softness of ferroelectric 180° domain walls

  • Stefani, Christina|||0000-0002-8818-075X
  • Ponet, Louis
  • Shapovalov, Konstantin|||0000-0002-7978-2986
  • Chen, Peng
  • Langenberg, Eric|||0000-0002-6944-4713
  • Schlom, Darrell G.|||0000-0003-2493-6113
  • Artyukhin, Sergey
  • Stengel, Massimiliano|||0000-0003-4175-3888
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Catalan, Gustau|||0000-0003-0214-4828
Using scanning probe microscopy, we measure the out-of-plane mechanical response of ferroelectric 180° domain walls and observe that, despite separating domains that are mechanically identical, the walls appear mechanically distinct-softer-compared to the domains. This effect is observed in different ferroelectric materials (LiNbO3, BaTiO3, and PbTiO3) and with different morphologies (from single crystals to thin films), suggesting that the effect is universal. We propose a theoretical framework that explains the domain wall softening and justifies that the effect should be common to all ferroelectrics. The lesson is, therefore, that domain walls are not only functionally different from the domains they separate, but also mechanically distinct.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Self-pixelation through fracture in VO2 thin films

  • Rodríguez Domínguez, Laura|||0000-0002-6669-1962
  • Del Corro, Elena|||0000-0001-6452-9139
  • Conroy, Michele
  • Moore, Kalani
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Santiso, José|||0000-0003-4274-2101
  • Catalan, Gustau|||0000-0003-0214-4828
Vanadium dioxide (VO2) is an archetypal Mott material with a metal-insulator transition (MIT) at near room temperature. In thin films, this transition is affected by substrate-induced strain but as film thickness increases, the strain is gradually relaxed and the bulk properties are recovered. Epitaxial films of VO2 on (001)-oriented rutile titanium dioxide (TiO2) relax substrate strain by forming a network of fracture lines that crisscross the film along well-defined crystallographic directions. This work shows that the electronic properties associated with these lines result in a pattern that resembles a "street map" of fully strained metallic VO2 blocks separated by insulating VO2 stripes. Each block of VO2 is thus electronically self-insulated from its neighbors, and its MIT can be locally induced optically with a laser, or electronically via the tip of a scanning probe microscope so that the films behave functionally as self-patterned pixel arrays.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Origin of large negative electrocaloric effect in antiferroelectric PbZr O3

  • Vales Castro, Pablo|||0000-0001-9181-1789
  • Faye, Romain
  • Vellvehi, Miquel|||0000-0002-0127-4690
  • Nouchokgwe, Youri
  • Perpiñà Giribet, Xavier|||0000-0001-5946-5580
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Jordà Sanuy, Xavier|||0000-0003-1967-610X
  • Roleder, Krystian|||0000-0002-2116-2362
  • Kajewski, Dariusz|||0000-0002-0196-7489
  • Perez-Tomas, Amador|||0000-0002-0551-3142
  • Defay, Emmanuel|||0000-0003-1462-8969
  • Catalan, Gustau|||0000-0003-0214-4828
We have studied the electrocaloric response of the archetypal antiferroelectric PbZrO3 as a function of voltage and temperature in the vicinity of its antiferroelectric-paraelectric phase transition. Large electrocaloric effects of opposite signs, ranging from an electrocooling of -3.5 K to an electroheating of +5.5K, were directly measured with an infrared camera. We show by calorimetric and electromechanical measurements that the large negative electrocaloric effect comes from an endothermic antiferroelectric-ferroelectric switching, in contrast to dipole destabilization of the antiparallel lattice, previously proposed as an explanation for the negative electrocaloric effect of antiferroelectrics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Metallic diluted dimerization in VO2 tweeds

  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Rodríguez Domínguez, Laura|||0000-0002-6669-1962
  • Pruneda, Miguel|||0000-0002-3621-6095
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Santiso, José|||0000-0003-4274-2101
  • Catalan, Gustau|||0000-0003-0214-4828
The observation of electronic phase separation textures in vanadium dioxide, a prototypical electron-correlated oxide, has recently added new perspectives on the long standing debate about its metal-insulator transition and its applications. Yet, the lack of atomically resolved information on phases accompanying such complex patterns still hinders a comprehensive understanding of the transition and its implementation in practical devices. In this work, atomic resolution imaging and spectroscopy unveils the existence of ferroelastic tweed structures on ≈5 nm length scales, well below the resolution limit of currently used spectroscopic imaging techniques. Moreover, density functional theory calculations show that this pretransitional fine-scale tweed, which on average looks and behaves like the standard metallic rutile phase, is in fact weaved by semi-dimerized chains of vanadium in a new monoclinic phase that represents a structural bridge to the monoclinic insulating ground state. These observations provide a multiscale perspective for the interpretation of existing data, whereby phase coexistence and structural intermixing can occur all the way down to the atomic scale.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Role of pO2 and film microstructure on the memristive properties of La2NiO4+δ/LaNiO3-δ bilayers

  • Maas, Klaasjan
  • Wulles, Chloé
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Lafarge, Valentin
  • Santiso, José|||0000-0003-4274-2101
  • Burriel, Mónica|||0000-0002-7973-7421
LaNiO/LaNiO bilayers deposited at varying pO conditions resulted in remarkable differences in film microstructure and cell parameters, directly affecting the electrical behaviour of Pt/LaNiO/LaNiO/Pt devices. The devices deposited at low pO showed the largest memristance. We propose this is due to the formation of a p-type Schottky contact between LaNiO and LaNiO, where the extent of its carrier depletion width can be modulated by the electric-field induced drift of interstitial oxygen ions acting as mobile acceptor dopants in LaNiO.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Strong strain gradients and phase coexistence at the metal-insulator transition in VO2 epitaxial films

  • Rodríguez Domínguez, Laura|||0000-0002-6669-1962
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Frontera, Carlos|||0000-0002-0091-4756
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Catalan, Gustau|||0000-0003-0214-4828
  • Santiso, José|||0000-0003-4274-2101
The proximity of a thermodynamic triple point and the formation of transient metastable phases may result in complex phase and microstructural trajectories across the metal-insulator transition in strained VO films. A detailed analysis using in-situ synchrotron X-ray diffraction unveils subtle fingerprints of this complexity in the structure of epitaxial films. During phase transition the low-temperature monoclinic M1 phase is constrained along the {111} planes by the coexisting high-temperature R phase domains, which remain epitaxially clamped to the substrate. This geometrical constraint induces counteracting local stresses that result in a combined tilt and uniaxial in-plane compression of M1 domains, and a concomitant anomalous c-axis elongation. This mechanism progressively transforms the M1 phase into the transitional triclinic phase (T), and ultimately into the monoclinic M2 phase, generating strong strain and tilt gradients that remain frozen after the complete transformation of the R phase upon cooling to RT. The transformation path of VO films, the complex competition between stable and metastable VO polymorphs and its impact on the structure of the low temperature monoclinic state, provide essential insights for understanding the electronic and mechanical properties of the films at the nanoscale, as well as to control their use in functional devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Pulsed laser deposition of epitaxial non-doped PbTiO3 thin films from Pbo-TiO2 mosaic targets

  • Sakai, Joe|||0000-0001-7688-0655
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Vales Castro, Pablo|||0000-0001-9181-1789
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Santiso, José|||0000-0003-4274-2101
PbTiO3 (PTO) suffers from difficulty in preparing high-density robust bulk ceramics, which in turn has been a bottleneck in thin films growth with physical vapor deposition (PVD) methods. In the present work, we prepared non-doped PTO thin films by a pulsed laser deposition (PLD) method with either a single PTO target or a mosaic target consisting of PbO and TiO2 pie-shaped pieces. On the PTO single target, laser irradiation caused selective ablation of Pb, resulting in Tirich cone-shaped pillar structure on the surface, whereas the irradiated surface of PbO and TiO2 pieces was smoother. Epitaxial PTO films deposited on SrTiO3 (001) substrates from the pie-chart targets with PbO:TiO2 areal ratio from 3:5 to 5:3 resulted in composition, crystallinity, flatness, and ferroelectric properties almost independent of the areal ratio. The averaged composition of each film was close to stoichiometric, suggesting a compositional self-control mechanism. For growing epitaxial and high-quality non-doped PTO films, a PbO-TiO2 pie-chart target is advantageous in easiness of handling and stable surface structure.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhanced Thermoelectric Properties of Misfit BiSrCaCoO, Isovalent Substitutions and Selective Phonon Scattering

  • Chatterjee, Arindom|||0000-0002-0861-2058
  • Banik, Ananya
  • Sachat, Alexandros el|||0000-0003-3798-9724
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Biswas, Kanishka
  • Santiso, José|||0000-0003-4274-2101
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
Layered Bi-misfit cobaltates, such as BiSrCoO, are the natural superlattice of an electrically insulating rocksalt (RS) type BiSrO layer and electrically conducting CoO layer, stacked along the crystallographic c-axis. RS and CoO layers are related through charge compensation reactions (or charge transfer). Therefore, thermoelectric transport properties are affected when doping or substitution is carried out in the RS layer. In this work, we have shown improved thermoelectric properties of spark plasma sintered BiSrCaCoO alloys (x = 0, 0.3 and 0.5). The substitution of Ca atoms affects the thermal properties by introducing point-defect phonon scattering, while the electronic conductivity and thermopower remain unaltered.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Improved High Temperature Thermoelectric Properties in Misfit Ca3Co4O9 by Thermal Annealing

  • Chatterjee, Arindom|||0000-0002-0861-2058
  • Sachat, Alexandros el|||0000-0003-3798-9724
  • Banik, Ananya
  • Biswas, Kanishka
  • Castro-Alvarez, Alejandro|||0000-0001-8360-8027
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Santiso, José|||0000-0003-4274-2101
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
CaCoO, a p-type thermoelectric material based on transition-metal oxides, has garnered significant interest due to its potential in thermoelectric applications. Its unique misfit-layered crystal structure contributes to low thermal conductivity and a high Seebeck coefficient, leading to a thermoelectric figure of merit (zT) of ≥1 at 1000 K. Conventionally, it has been believed that thermopower reaches its upper limit above 200 K. However, our thermopower measurements on polycrystalline CaCoO samples have revealed an unexpected increase in thermopower above 380 K. In this study, we investigate the effects of high oxygen pressure annealing on CaCoO and provide an explanation based on the mixed oxide states of cobalt and carrier hopping. Our results demonstrate that annealing induces modifications in the defect chemistry of CaCoO, leading to a decrease in electron hopping probability and the emergence of a thermal activation-like behavior in thermopower. These findings carry significant implications for the design and optimization of thermoelectric materials based on misfit cobaltates, opening new avenues for enhanced thermoelectric performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Impact of Oxygen Stoichiometry on the Thermoelectric Properties of Bi2Sr2Co2Oy Thin Films

  • Chatterjee, Arindom|||0000-0002-0861-2058
  • Sachat, Alexandros el|||0000-0003-3798-9724
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Santiso, José|||0000-0003-4274-2101
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
In this study, we present a comprehensive analysis of the thermoelectric (TE) properties of highly c-axis-oriented thin films of layered misfit cobaltates BiSrCoO. The films exhibit a high c-axis orientation, facilitating precise measurements of electronic transport and TE properties along the a-b crystallographic plane. Our findings reveal that the presence of nearly stoichiometric oxygen content results in high thermopower with metallic conductivity, while the annealing of the films in a reduced oxygen atmosphere eliminates their metallic behavior. According to the well-established Heike's limit, the thermopower tends to become temperature independent when the thermal energy significantly exceeds the bandwidth, which provides a rough estimation of charge carrier density by using the Heike's formula. This observation suggests that the dominant contribution to the thermopower comes from the narrow Co-t bands near the Fermi energy. Our study demonstrates that the calculated thermopower value using Heike's formula, based on the Hall electron density of the BiSrCoO thin films at 300 K, aligns well with the experimental results, shedding light on the intriguing TE properties of this family of layered cobaltate oxide films.