Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A finite element method solution to the phase-field model of the Stefan problem

  • Orteu, Max
  • Sala Lardies, Esther
  • Fernández Méndez, Sonia
This work is concerned with the Phase-Field model of the Stefan problem, as well as the numerical solution with the Finite Element Method to simulate examples in two dimensions., This work was supported by Generalitat de Catalunya (2017-SGR-1278), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A Cº interior penalty method for 4th order PDEs

  • Fojo, Dani
  • Codony Gisbert, David
  • Fernández Méndez, Sonia
A method to solve 4th-order PDEs using the Finite Element Method (FEM) with standard C0 elements is derived and studied. It is based on a special weak form accounting for the discontinuous derivatives of the approximation and imposing their normal continuity across element sides in weak form. The method is developed for the equations of the deformation of a Kirchoff plate, but its extension to other 4th-order PDEs is expected to be straight-forward. The accuracy and convergence of the resulting numerical approximation is studied with numerical experiments., This work was supported by the EuropeanResearch Council (StG-679451 to IreneArias) and the Generalitat de Catalunya (2017-SGR-1278)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

eXtended hybridizable discontinuous Galerkin for incompressible flow problems with unfitted meshes and interfaces

  • Gürkan, Ceren
  • Kronbichler, Martin
  • Fernández Méndez, Sonia
The eXtended hybridizable discontinuous Galerkin (X-HDG) method is developed for the solution of Stokes problems with void or material interfaces. X-HDG is a novel method that combines the hybridizable discontinuous Galerkin (HDG) method with an eXtended finite element strategy, resulting in a high-order, unfitted, superconvergent method, with an explicit definition of the interface geometry by means of a level-set function. For elements not cut by the interface, the standard HDG formulation is applied, whereas a modified weak form for the local problem is proposed for cut elements. Heaviside enrichment is considered on cut faces and in cut elements in the case of bimaterial problems. Two-dimensional numerical examples demonstrate that the applicability, accuracy, and superconvergence properties of HDG are inherited in X-HDG, with the freedom of computational meshes that do not fit the interfaces, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication

An Introduction to the hybridizable discontinuous Galerkin method

  • Fernández Méndez, Sonia
The final publication is available at link.springer.com, This chapter in intended to be a didactical introduction to the Hybridizable Discontinuous Galerkin (HDG) method, including the formulation and its implementation. The Laplace and Stokes equations are considered as representative problems with self-adjoint operators, accounting for the incompressibility in the second one., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Extended hybridizable discontinuous galerkin with heaviside enrichment for heat bimaterial problems

  • Gürkan, Ceren
  • Kronbichler, Martin
  • Fernández Méndez, Sonia
The final publication is available at link.springer.com, A novel strategy for the hybridizable discontinuous Galerkin (HDG) solution of heat bimaterial problems is proposed. It is based on eXtended finite element philosophy, together with a level set description of interfaces. Heaviside enrichment on cut elements and cut faces is used to represent discontinuities across the interface. A suitable weak form for the HDG local problem on cut elements is derived, accounting for the discontinuous enriched approximation, and weakly imposing continuity or jump conditions over the material interface. The computational mesh is not required to fit the interface, simplifying and reducing the cost of mesh generation and, in particular, avoiding continuous remeshing for evolving interfaces. Numerical experiments demonstrate that X-HDG keeps the accuracy of standard HDG methods in terms of optimal convergence and superconvergence., Peer Reviewed, Postprint (author's final draft)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Converse flexoelectricity yields large piezoresponse force microscopy signals in non-piezoelectric materials

  • Abdollahi, Amir|||0000-0003-0363-4984
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Arias, Irene|||0000-0002-6761-3499
  • Catalan, Gustau|||0000-0003-0214-4828
Converse flexoelectricity is a mechanical stress induced by an electric polarization gradient. It can appear in any material, irrespective of symmetry, whenever there is an inhomogeneous electric field distribution. This situation invariably happens in piezoresponse force microscopy (PFM), which is a technique whereby a voltage is delivered to the tip of an atomic force microscope in order to stimulate and probe piezoelectricity at the nanoscale. While PFM is the premier technique for studying ferroelectricity and piezoelectricity at the nanoscale, here we show, theoretically and experimentally, that large effective piezoelectric coefficients can be measured in non-piezoelectric dielectrics due to converse flexoelectricity.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The emancipation of flexoelectricity

  • Arias, Irene|||0000-0002-6761-3499
  • Catalan, Gustau|||0000-0003-0214-4828
  • Sharma, Pradeep
Consider the following: writing (and reading) ferroelectric memories without applying voltage;1-3 piezoelectric-like transduction without piezoelectric materials;4-6 bone remodeling7 and mammalian hearing;8,9 asymmetric fracture toughness;10 and bulk photovoltaic effects in non-polar materials.11 What do these apparently disparate phenomena have in common? Flexoelectricity...
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Switchable tribology of ferroelectrics

  • Cho, Seongwoo|||0000-0002-3000-4251
  • Gaponenko, Iaroslav|||0000-0002-9694-7033
  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Barceló-Mercader, Jordi
  • Arias, Irene|||0000-0002-6761-3499
  • Kim, Daeho
  • Lichtensteiger, Céline|||0000-0002-9796-8071
  • Yeom, Jiwon
  • Musy, Loïc|||0000-0002-7741-6763
  • Kim, Hyunji
  • Han, Seung Min
  • Catalan, Gustau|||0000-0003-0214-4828
  • Paruch, Patrycja
  • Hong, Seungbum|||0000-0002-2667-1983
Switchable tribological properties of ferroelectrics offer an alternative route to visualize and control ferroelectric domains. Here, we observe the switchable friction and wear behavior of ferroelectrics using a nanoscale scanning probe-down domains have lower friction coefficients and show slower wear rates than up domains and can be used as smart masks. This asymmetry is enabled by flexoelectrically coupled polarization in the up and down domains under a sufficiently high contact force. Moreover, we determine that this polarization-sensitive tribological asymmetry is widely applicable across various ferroelectrics with different chemical compositions and crystalline symmetry. Finally, using this switchable tribology and multi-pass patterning with a domain-based dynamic smart mask, we demonstrate three-dimensional nanostructuring exploiting the asymmetric wear rates of up and down domains, which can, furthermore, be scaled up to technologically relevant (mm-cm) size. These findings demonstrate that ferroelectrics are electrically tunable tribological materials at the nanoscale for versatile applications.